This section lists the settings required for sending files with a Wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
IPv4 Gateway Address |
Necessary |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
LAN Type |
Necessary |
Interface Settings/Network |
Permit SNMPv3 Communication |
As required |
Interface Settings/Network |
Permit SSL / TLS Communication |
As required |
Interface Settings/Network |
Host Name |
As required |
Interface Settings/Wireless LAN |
Communication Mode |
Necessary |
Interface Settings/Wireless LAN |
SSID Setting |
As required |
Interface Settings/Wireless LAN |
Ad-hoc Channel |
As required |
Interface Settings/Wireless LAN |
Security Method |
As required |
File Transfer |
Default User Name / Password (Send) |
As required |
File Transfer |
Scanner Resend Interval Time |
As required |
File Transfer |
Number of Scanner Resends |
As required |
For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
[Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN are connected, the selected interface takes precedence.
