Au format texte : 

Acer Projector X1185/X1185N/X1285/X1285N/ S1285/P1185/P1285/P1385W/ X1385WH/H6518BD Series User's Guide Copyright © 2015. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 01/2015 Acer Projector Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies. "HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: • Install the power supply unit before connecting the power cord to the AC power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. • Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. • Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. • This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. • Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length. v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: • the power cord or plug is damaged, cut or frayed • liquid was spilled into the product • the product was exposed to rain or water • the product has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • Turn on the projector first and then signal sources. • Do not place the product in the following environments: • Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary. • Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. • Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image. • Locations near fire alarms. • Locations with an ambient temperature above 40 ºC/104 ºF. • Locations where the altitudes are higher than 10000 feet. • Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire. • When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. • Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off. • Do not touch the air outlet grille and bottom plate which become hot. • Clean the air filter frequently. The temperature inside may rise and cause damage when the filter/ventilation slots are clogged with dirt or dust. • Do not look into the air outlet grille when projector is operating. It may hurt your eyes. • Always open the lens shutter or remove the lens cap when the projector is on. • Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. • Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. • Contact your local dealer or Acer service center when you need to change the lamp. • The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays. • Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. • Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. • Do not increase the volume to block out noisy surroundings. • Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/index.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org "Lamp(s) contain Mercury, Dispose Properly." viii First Thing First Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the projector provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • In extremely hot, cold or humid environments. • In areas susceptible to excessive dust and dirt. • Near any appliance that generates a strong magnetic field. • Place in direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. • Please do not open or disassemble the product as this may cause electric shock. • The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays. • When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. • Turn on the projector first and then the signal sources. • Do not use lens cap when projector is in operation. • When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center. Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 MHL Feature Introduction 7 Getting Started 8 Connecting the Projector 8 Turning the Projector On/Off 13 Turning On the Projector 13 Turning Off the Projector 14 Adjusting the Projected Image 15 Adjusting the Height of the Projected Image 15 How to Optimize Image Size and Distance 16 How to Get a Preferred Image Size by Adjusting Distance and Zoom 21 User Controls 26 Installation Menu 26 Onscreen Display (OSD) Menus 27 Color 28 Image 31 Setting 33 Management 37 Audio 37 3D 38 Language 39 Appendices 40 Contents Troubleshooting 40 LED & Alarm Definition Listing 44 Using the inner connector(s) 45 Ceiling Mount Installation 46 Specifications 49 Compatibility Modes 53 Regulations and safety notices 57 1 English Introduction Product Features This product is a single-chip DLP® projector, including the following outstanding features: • DLP® technology • X1185/X1185N/P1185: Native 800 x 600 SVGA resolution, Auto/4:3/16:9 aspect ratio supported X1285/X1285N/S1285/P1285: Native 1024 x 768 XGA resolution, Auto/4:3/ 16:9 aspect ratio supported P1385W/X1385WH: Native 1280 x 800 WXGA resolution, Auto/Full/4:3/16:9/ L.Box aspect ratio supported H6518BD: Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box aspect ratio supported • Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported (P1185/P1285/P1385W/X1385WH/H6518BD) • One-touch "3D" button on remote control allows quick and easy access to the 3D functions • Acer ColorBoost technology delivers vivid, life-like images • High brightness and contrast ratio • Versatile display modes enable optimum performance in any situation • NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported • Lower power consumption and economy (ECO) mode extends lamp life • Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life. - Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. - ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 minutes. • Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement • Advanced keystone correction delivers optimum presentations • Multi-language Onscreen Display (OSD) menus • Manual focus/zoom projection lens • 2X digital zoom and pan move function • Microsoft® Windows® 2000, XP, 7, 8, 8.1, Vista®, Macintosh OS, Chrome OS compliant • CEC (Consumer Electronics Control) function supported (H6518BD) • LumiSense+ supported (H6518BD) • TCO certified (P1285/X1285/P1385W/X1385WH) 2 English Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable Security card User’s guide (CD-ROM) Remote control Quick start guide Battery x 2 Carrying case (Optional) Dust filter (Optional) WirelessHD dongle kit (MWIHD1) (Optional) X1185/X1185N/X1285/X1285N/ S1285 P1185/X1385WH P1285/P1385W/H6518BD 3 English Projector Overview Projector Outlook Front/upper side Rear side # Description # Description 1 Control panel 4 HDMI (MHL) connector Micro USB cable 2 Power key and Power indicator LED 5 Projection lens 3 Zoom ring and Focus ring Focus ring 6 Remote control receiver 7 Lens cap # Description # Description 1 Audio input connector Audio output connector 7 Analog RGB signal/HDTV/ component video input connector 2 S-Video input connector Composite video input connector 8 Monitor loop-through output connector 3 DC 5V output 9 RS232 connector 4 Mini USB connector 10 Kensington™ lock port 5 HDMI (MHL) connector 11 Power socket 6 Component video input connector 12 Tilt adjusting wheel X1185/X1185N/X1285/X1285N/ P1185/X1385WH S1285 P1285/P1385W/H6518BD 1 3 5 2 6 1 3 5 2 6 1 3 5 2 7 4 6 7 7 S-VIDEO VGA IN -2 VGA IN -1 VGA-OUT RS232 USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT VIDEO S-VIDEO VGA IN -2 VGA IN -1 VGA-OUT RS232 USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT VIDEO VGA-OUT USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT S-VIDEO HDMI / MHL VGA IN -1 RS232 VIDEO USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT S-VIDEO DC 5V OUT VGA IN -2 VGA IN -1 VGA-OUT RS232 DC 5V OUT HDMI / MHL VIDEO X1185/X1185N/X1285/X1285N/S1285 P1185/P1285/P1385W/X1385WH H6518BD 1 2 4 5 6 7 9 1 2 3 3 1 2 4 7 8 4 5 7 8 9 8 9 10 11 12 4 English Control Panel # Function Description 1 LAMP Lamp Indicator LED. 2 POWER indicator LED Refer to the "Turning the Projector On/Off" section. 3 Keystone Adjusts image distortion caused by tilting projection (±40 degrees). 4 Power key Refer to the "Turning the Projector On/Off" section. 5 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. 6 MODE Chooses a display mode. 7 TEMP Temp Indicator LED. 8 SOURCE Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source. 9 Four directional selection keys Selects items or makes adjustments to your selection 10 RESYNC Automatically synchronizes the projector to the input source. 1 7 8 3 3 5 6 10 9 4 2 5 Remote Control Layout English # Function Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 MEDIA SETUP (No function) 3 ZOOM Zooms the projector display in or out. 4 MODE Chooses a display mode. 5 Keystone Adjusts image distortion caused by tilting projection (±40 degrees). Four directional selection keys Selects items or makes adjustments to your selection. 6 Keypad 0~9 Press "0~9" to input a password in the "Setting" > "Security" OSD. 7 VGA To change source to VGA. This connection supports analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i). 8 COMPONENT To change source to Component video. This connector supports YPbPr/YCbCr. 9 S-VIDEO To change source to S-Video. 10 HDMI™/DVI To change source to HDMI™ (or DVI). (for the model with HDMI™ or DVI connector) 11 Infrared transmitter Sends signals to the projector. X1185/X1185N/X1285/X1285N/ S1285/P1185/X1385WH/H6518BD P1285/P1385W 6 English 12 FREEZE To pause the screen image. 13 SOURCE Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source. 14 HIDE Press "HIDE" to hide screen image; press again to display the image. 15 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. 16 PgUp/PgDn For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a USB cable. 17 VIDEO To change source to composite video. 18 RATIO Chooses an aspect ratio. 19 WIRELESS; LAN/WiFi (No function) 20 Rewind Play/Pause Stop Fast-forward (No function) 21 SD/USB A (No function) 22 USB B (No function) 23 3D Press to open the 3D menu for adjusting 3D settings. 24 Laser Emits visible laser pointer light for presentation purposes. This function is not available for the projectors sold in the Japanese market. # Function Description 7 MHL Feature Introduction English When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL control mode. After entering the MHL control mode, press "SOURCE" to switch between the navigation mode (default), media mode and numeric mode. # Function Description Navigation mode Media mode Numeric mode 4 MODE Long press for one second to enter or leave the MHL control mode. 13 SOURCE After entering the MHL control mode, press to switch between the navigation mode (default), media mode and numeric mode. 5 Four directional select keys Up Up (No function) (No function) down down (No function) (No function) Left Left Decreases the volume. (No function) Right Right Increases the volume. (No function) 6 Keypad 0~9 (No function) (No function) Enters 0~9. 15 MENU Goes to the root menu. (No function) (No function) 20 Rewind (No function) Rewinds/Plays/ Pauses/Stops/ Fast-forwards the playing of media files. Enters 1. Play/Pause Selects or enters items. Enters 2. Stop Exits current page. Enters 3. Fast-forward (No function) (No function) 8 English Getting Started Connecting the Projector • X1185/X1185N/X1285/X1285N/S1285 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. # Description # Description 1 Power cord 6 S-Video cable 2 VGA cable 7 RS232 cable 3 VGA to component video/HDTV adapter 8 USB cable 4 Composite video cable 9 3 RCA component cable 5 Audio cable S-VIDEO VGA IN -2 VGA IN -1 VGA-OUT RS232 USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT VIDEO B HDTV adapter 9 3 RBG RBG DVD player, Set-top box, HDTV receiver VGA RS232 Video/S-Video Output Display Speakers 9 • P1185/P1285/P1385W/X1385WH English # Description # Description 1 Power cord 7 RS232 cable 2 VGA cable 8 USB cable 3 VGA to component video/HDTV adapter 9 3 RCA component cable 4 Composite video cable 10 HDMI (MHL) cable 5 Audio cable 11 WirelessHD dongle 6 S-Video cable 12 Wireless dongle USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT S-VIDEO DC 5V OUT HDMI / MHL VGA IN -2 VGA IN -1 VGA-OUT RS232 VIDEO HDTV adapter 3 DVD player, Set-top box, HDTV receiver VGA RS232 Video/S-Video Output Display Speakers (P1285/P1385W) Smartphone/ tablet or 10 English Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1), MWA3, Android (MWND1), ChromecastTM. 11 • H6518BD English # Description # Description 1 Power cord 8 USB cable 2 VGA cable 9 3 RCA component cable 4 Composite video cable 10 HDMI (MHL) cable 5 Audio cable 11 WirelessHD dongle 6 S-Video cable 12 Wireless dongle 7 RS232 cable USB MINI-B AUDIO IN -1 AUDIO IN -2 AUDIO OUT S-VIDEO HDMI / MHL VGA IN -1 VIDEO DC 5V OUT VGA-OUT RS232 DVD player, Set-top box, HDTV receiver VGA RS232 Video/S-Video Output Speakers Smartphone/ tablet or Display 12 English Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1), MWA3, Android (MWND1), ChromecastTM. 13 English Turning the Projector On/Off Turning On the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. 2 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when the Source Lock function is disabled). • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs. X1185/X1185N/X1285/X1285N/ P1185/X1385WH S1285 P1285/P1385W/H6518BD 1 & 2 14 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press power button again to complete the shutdown process" Press the power button again. 2 The LED Power indicator will turn solid red to indicate standby mode. 3 It is now safe to unplug the power cord. When Instant Resume is selected: 1 The LED Power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. 2 As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2-minute shutdown process. 3 Once the system has finished cooling, the LED Power indicator will stop blinking and turn solid red to indicate standby mode. 4 It is now safe to unplug the power cord. Warning indicators: • "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED Temp indicator turns solid red, contact your local reseller or service center. 15 Adjusting the Projected Image English Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: 1 Use the front Tilt adjusting wheel to raise the image to the desired height and angle. 2 Use the rear Tilt adjusting wheel to fine-tune the display angle. To lower the image: 1 Use the front Tilt adjusting wheel to lower the image to the desired height angle. 2 Use the rear Tilt adjusting wheel to fine-tune the display angle. 1 2 Tilt adjusting wheel Tilt adjusting wheel 16 English How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA If the projector is 3 m from the screen, good image quality is possible for image sizes between 87" and 95". Note: Remind as below figure, the space of 160 cm height is required when the projector is located at 3 m distance. Desired Distance (m) < A > Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom) Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 1 29 59 x 44 49 32 65 x 48 53 1.5 43 88 x 66 73 48 97 x 73 80 2 58 118 x 88 97 64 129 x 97 106 2.5 72 147 x 110 121 79 161 x 121 133 3 87 176 x 132 146 95 194 x 145 160 3.5 101 206 x 154 170 111 226 x 169 186 4 116 235 x 176 194 127 258 x 194 213 4.5 130 265 x 199 218 143 290 x 218 240 5 145 294 x 221 243 159 323 x 242 266 6 174 353 x 265 291 191 387 x 290 319 7 203 412 x 309 340 222 452 x 339 373 8 232 471 x 353 388 254 516 x 387 426 9 261 529 x 397 437 286 581 x 435 479 10 289 588 x 441 485 318 645 x 484 532 11 318 647 x 485 534 349 710 x 532 585 12 347 706 x 529 582 381 774 x 581 639 Zoom Ratio: 1.1 x 3 m Desired distance Height: 146 cm Height: 160 cm From base to top of image Max screen size Min screen size 87" 95" 17 • XGA English If the projector is 3 m from the screen, good image quality is possible for image sizes between 72" and 79". Note: Remind as below figure, the space of 133 cm height is required when the projector is located at 3 m distance. Desired Distance (m) < A > Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom) Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 1 24 49 x 37 40 26 54 x 40 44 1.5 36 74 x 55 61 40 81 x 60 67 2 48 98 x 74 81 53 108 x 81 89 2.5 60 123 x 92 101 66 134 x 101 111 3 72 147 x 110 121 79 161 x 121 133 3.5 84 172 x 129 142 93 188 x 141 155 4 96 196 x 147 162 106 215 x 161 177 4.5 109 221 x 165 182 119 242 x 181 200 5 121 245 x 184 202 132 269 x 202 222 6 145 294 x 221 243 159 323 x 242 266 7 169 343 x 257 283 185 376 x 282 310 8 193 392 x 294 324 212 430 x 323 355 9 217 441 x 331 364 238 484 x 363 399 10 241 490 x 368 404 265 538 x 403 444 11 265 539 x 404 445 291 591 x 444 488 12 289 588 x 441 485 318 645 x 484 532 Zoom Ratio: 1.1 x 3 m Desired distance Height: 121 cm Height: 133 cm From base to top of image Max screen size Min screen size 72" 79" 18 English • XGA (fixed-zoom models) If the projector is 3 m from the screen, good image quality is possible for image sizes around 242". Note: Remind as below figure, the space of 424 cm height is required when located at 3 m distance. Desired Distance (m) < A > Screen Size Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 1 81 164 x 123 141 1.5 121 246 x 184 212 2 161 328 x 246 283 2.5 202 410 x 307 353 3 242 492 x 369 424 3.5 282 574 x 430 495 4 323 656 x 492 566 4.5 363 738 x 553 636 5 403 820 x 615 707 6 484 984 x 738 848 7 565 1148 x 861 990 8 645 1311 x 984 1131 9 726 1475 x 1107 1273 10 807 1639 x 1230 1414 11 887 1803 x 1352 1555 12 968 1967 x 1475 1697 Zoom Ratio: 1.0 x 3 m Desired distance Height: 424 cm From base to top of image 242" 19 • WXGA English If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 93". Note: Remind as below figure, the space of 125 cm height is required when the projector is located at 3 m distance. Desired Distance (m) < A > Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom) Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 1 28 61 x 38 38 31 67 x 42 42 1.5 42 91 x 57 57 46 100 x 63 63 2 56 121 x 76 76 62 133 x 83 83 2.5 70 152 x 95 95 77 167 x 104 104 3 84 182 x 114 114 93 200 x 125 125 3.5 98 212 x 133 133 108 233 x 146 146 4 113 242 x 152 152 124 267 x 167 167 4.5 127 273 x 170 170 139 300 x 188 188 5 141 303 x 189 189 155 333 x 208 208 6 169 364 x 227 227 186 400 x 250 250 7 197 424 x 265 265 217 467 x 292 292 8 225 485 x 303 303 248 533 x 333 333 9 253 545 x 341 341 279 600 x 375 375 10 281 606 x 379 379 310 667 x 417 417 11 310 667 x 417 417 340 733 x 458 458 12 338 727 x 455 455 371 800 x 500 500 Zoom Ratio: 1.1 x 3 m Desired distance Height: 114 cm Height: 125 cm From base to top of image Max screen size Min screen size 84" 93" 20 English • 1080p If the projector is 3 m from the screen, good image quality is possible for image sizes between 90" and 118". Note: Remind as below figure, the space of 154 cm height is required when the projector is located at 3 m distance. Desired Distance (m) < A > Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom) Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 1 30 67 x 38 39 39 87 x 49 51 1.5 45 100 x 56 59 59 130 x 73 77 2 60 133 x 75 79 79 174 x 98 103 2.5 75 167 x 94 98 98 217 x 122 128 3 90 200 x 113 118 118 261 x 147 154 3.5 105 233 x 131 138 137 304 x 171 180 4 120 267 x 150 158 157 348 x 196 205 4.5 136 300 x 169 177 177 391 x 220 231 5 151 333 x 188 197 196 435 x 245 257 6 181 400 x 225 236 236 522 x 293 308 7 211 467 x 263 276 275 609 x 342 360 8 241 533 x 300 315 314 696 x 391 411 9 271 600 x 338 354 354 783 x 440 462 10 301 667 x 375 394 393 870 x 489 514 11 331 733 x 413 433 432 957 x 538 565 12 361 800 x 450 473 471 1043 x 587 616 Zoom Ratio: 1.3 x 3 m Desired distance Height: 118 cm Height: 154 cm From base to top of image Max screen size Min screen size 90" 118" 21 How to Get a Preferred Image Size by Adjusting English Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA To obtain an image size of 70", set the projector at a distance between 2.2 m and 2.4 m from the screen and adjust the zoom level accordingly. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 61 x 46 1.0 50 40 81 x 61 1.3 1.4 67 50 102 x 76 1.6 1.7 84 60 122 x 91 1.9 2.1 101 70 142 x 107 2.2 2.4 117 80 163 x 122 2.5 2.8 134 90 183 x 137 2.8 3.1 151 100 203 x 152 3.1 3.5 168 120 244 x 183 3.8 4.1 201 150 305 x 229 4.7 5.2 251 180 366 x 274 5.7 6.2 302 200 406 x 305 6.3 6.9 335 250 508 x 381 7.9 8.6 419 300 610 x 457 9.4 503 Zoom Ratio: 1.1 x Desired distance Height: 117 cm From base to top of image 70" Desired image size 2.2 m 2.4 m 22 English • XGA To obtain an image size of 70", set the projector at a distance between 2.6 m and 2.9 m from the screen and adjust the zoom level accordingly. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 61 x 46 1.2 50 40 81 x 61 1.5 1.7 67 50 102 x 76 1.9 2.1 84 60 122 x 91 2.3 2.5 101 70 142 x 107 2.6 2.9 117 80 163 x 122 3.0 3.3 134 90 183 x 137 3.4 3.7 151 100 203 x 152 3.8 4.1 168 120 244 x 183 4.5 5.0 201 150 305 x 229 5.7 6.2 251 180 366 x 274 6.8 7.5 302 200 406 x 305 7.6 8.3 335 250 508 x 381 9.4 10.4 419 300 610 x 457 11.3 503 Zoom Ratio: 1.1 x Desired distance Height: 117 cm From base to top of image 70" Desired image size 2.6 m 2.9 m 23 • XGA (fixed-zoom models) English To obtain an image size of 70" set the projector at a distance 0.9 m from the screen. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 61 x 46 0.4 53 40 81 x 61 0.5 0.5 70 50 102 x 76 0.6 0.6 88 60 122 x 91 0.7 0.7 105 70 142 x 107 0.9 0.9 123 80 163 x 122 1.0 1.0 140 90 183 x 137 1.1 1.1 158 100 203 x 152 1.2 1.2 175 120 244 x 183 1.5 1.5 210 150 305 x 229 1.9 1.9 263 180 366 x 274 2.2 2.2 315 200 406 x 305 2.5 2.5 351 250 508 x 381 3.1 3.1 438 300 610 x 457 3.7 526 Zoom Ratio: 1.0 x Desired distance Height: 123 cm From base to top of image 70" Desired image size 0.9 m 24 English • WXGA To obtain an image size of 70" set the projector at a distance between 2.3 m and 2.5 m from the screen and adjust the zoom level accordingly. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 65 x 40 1.1 40 40 86 x 54 1.3 1.4 54 50 108 x 67 1.6 1.8 67 60 129 x 81 1.9 2.1 81 70 151 x 94 2.3 2.5 94 80 172 x 108 2.6 2.8 108 90 194 x 121 2.9 3.2 121 100 215 x 135 3.2 3.6 135 120 258 x 162 3.9 4.3 162 150 323 x 202 4.8 5.3 202 180 388 x 242 5.8 6.4 242 200 431 x 269 6.5 7.1 269 250 538 x 337 8.1 8.9 337 300 646 x 404 9.7 404 Zoom Ratio: 1.1 x Desired distance Height: 94 cm From base to top of image 70" Desired image size 2.3 m 2.5 m 25 • 1080p English To obtain an image size of 70" set the projector at a distance between 1.8 m and 2.3 m from the screen and adjust the zoom level accordingly. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 66 x 37 1.0 39 40 89 x 50 1.0 1.3 52 50 111 x 62 1.3 1.7 65 60 133 x 75 1.5 2.0 78 70 155 x 87 1.8 2.3 92 80 177 x 100 2.0 2.7 105 90 199 x 112 2.3 3.0 118 100 221 x 125 2.5 3.3 131 120 266 x 149 3.1 4.0 157 150 332 x 187 3.8 5.0 196 180 398 x 224 4.6 6.0 235 200 443 x 249 5.1 6.6 262 250 553 x 311 6.4 8.3 327 300 664 x 374 7.6 392 Zoom Ratio: 1.3 x Desired distance Height: 92 cm From base to top of image 70" Desired image size 1.8 m 2.3 m 26 English User Controls Installation Menu The Installation menu provides an Onscreen Display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal" is displayed on the screen. 1 Turn on the projector by pressing (POWER) on the control panel or remote control. 2 Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. Note: The OSD screenshot is for reference only and may differ from the actual design. 4 The Installation menu includes several options. Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. 5 Press "MENU" anytime to exit the menu and return to the Acer welcome screen. 27 Onscreen Display (OSD) Menus English The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel or remote control. • When the OSD is displayed, use to select an item in the main menu. After selecting the desired main menu item, press to enter a submenu for feature setting. • Use to select the desired item and adjust the settings by using . • Select the next item to be adjusted in the submenu and adjust as described above. • Press "MENU" on the control panel or remote control, the screen will return to the main menu. • To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings. Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector. Main menu Submenu Setting 28 English Color LumiSense+ The light sensor of LumiSense+ technology can intelligently optimizes the brightness and color saturation of projected image based on actual ambient light. The feature greatly enhances dark detail visibility and color saturation. • Off: For normal mode. (ambient light sensor is off) • Auto Bright: Light sensor is on to automatically detect ambient light and optimize the brightness and color saturation of projected image. • Dynamic Black: automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Movie: For brighter and general movie/video/photo playing. • Dark Cinema: For dark movie content. • Video: For playing video in a bright environment. • Picture: For graphic picture. • Game: For game content. • Education: For education environment. • Sport: For sport picture. • User: Memorize user’s settings. Wall Color Use this function to choose a proper color according to the wall. There are several choices, including White, Light Yellow, Light Blue, Pink and Dark Green. It will compensate for the color deviation due to the wall color to show the correct image tone. Brightness Adjusts the brightness of the image. • Press to darken the image. • Press to lighten the image. 29 English Contrast Controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. • Press to decrease the contrast. • Press to increase the contrast. Saturation Adjusts a video image from black and white to fully saturated colors. • Press to decrease the amount of color in the image. • Press to increase the amount of color in the image. Tint Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. Color Temperature Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Dynamic Black If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. 30 English Note: "Saturation" and "Tint" functions are not supported under computer mode. Advanced • Ind. Color Management: Adjusts the red, green, blue, cyan, yellow and magenta colors. • - Ind. Hue: Changes the hue of the color selected. • - Ind. Saturation: Adjusts a video image from black and white to fully saturated color. • - Ind. Gain: Adjusts the contrast levels. • Brilliant Color: Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. This feature is "On" by default. • White Peaking: Increases the brightness of whites that are near 100%. (Video sources only) • Film Mode: Sets the image optimized to 24-frame True Film mode for more realistic cadence of film playback during motion sequences. • Noise Reduction: Adjusts the level of noise reduction that helps to eliminate unwanted noise in the picture. • Black Extension: Analyzes the current input image and calculates an offset value which is then added to the analog to digital converter black level value. This ensures optimum black level for each analog source. 31 English Image Projection • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Projection Mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. Projection Location • Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceilingmounted projection. Aspect Ratio Use this function to choose your desired aspect ratio. • Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels. • Full (for WXGA/1080p models): The image will be displayed making full use of the horizontal and vertical pixels. • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the screen and displayed using a 16:9 ratio. • L.Box (for WXGA/1080p models): Keeps the original signal aspect ratio and zooms in by 1.333 times. Auto Keystone Automatically adjusts image distortion caused by tilting projection (±40 degrees). 32 English Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Keystone Manually adjusts image distortion caused by tilting projection (±40 degrees). This function is unavailable when Auto Keystone is set to "On". Manual Keystone Sharpness Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. H. Position (Horizontal Position) • Press to move the image left. • Press to move the image right. V. Position (Vertical Position) • Press to move the image down. • Press to move the image up. Frequency Changes the projector’s refresh rate to match the frequency of your computer’s graphics card. If you experience a vertical flickering bar in the projected image, use this function to correct it. Tracking Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it. HDMI Color Range Adjusts the color range of the HDMI image data to prevent color display error. • Auto: Automatically adjusts the color range by information from the player. • Limited Range: Processes the input image as limited color range data. • Full Range: Processes the input image as full color range data. HDMI Scan Info Adjusts the overscan ratio of the HDMI image on screen. • Auto: Automatically adjusts the overscan ratio by information from the player. • Underscan: Always no overscan on the HDMI image. • Overscan: Always keep overscan on the HDMI image. 33 Note: "HDMI Color Range" and "HDMI Scan Info" are only available when English the input signal is HDMI. Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use the memorized picture from the "Screen Capture" function. Screen Capture Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section. • Change the "Startup Screen" from the default setting "Acer" to "User". • Select "Screen Capture" to customize the startup screen. • A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose "No" to cancel the screen capture and exist the Onscreen Display (OSD). • A message appears stating that the screen capture is in progress. • When the screen capture is finished, the message disappears and the original display is shown. Source Lock Selecting "On" enables the function and when switching input signals, you need to press "SOURCE" on the control panel or remote control, or the direct source key on the remote control. When this function is disabled, the projector will detect your source automatically. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4 (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or SVideo input signal is selected and its system format is NTSC. 34 English VGA OUT (Standby) Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling this function slightly increases the standby power consumption. DC 5V Out (Standby) Selecting "On" enables the function. Both micro USB cable inside the projector and the DC 5V out port/USB A port (if available) on the back of the projector can output 5V power when it is in standby mode. Enabling this function slightly increases the standby power consumption. HDMI CEC (Internal) Selecting "On" allows synchronized power ON/OFF operation between the projector and a CEC-compatible device connected to the HDMI/MHL port of the projector. This function is only available for the internal HDMI/ MHL port. Reset Press after choosing "Yes" to return the display parameters on all menus to the factory default settings. Security Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. The factory default of "Administrator Password" is "1234". • Select "On" to enable the security function. You have to enter password depending on the "Security Mode". Please refer to "User Password" section for details. • If "Off" is selected, you can switch on the projector without password. 35 English Security Timeout (Min.) Once "Security" is set to "On", you can set timeout function. • Press to select timeout duration. • The range is from 10 to 990 minutes. • When time is up, the projector will request you to enter the password again. • The factory default setting of "Timeout (Min.)" is "Off". • Once the security function is enabled, the projector will request you to enter password when switching on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue. User Password • Press to set up or change "User Password". • Use the numerical keys on the remote control to set the password and press "MENU" to confirm. • To delete the digits, Press . • Enter the password again when you see "Confirm Password" displayed. • The password should be 4~8 digits in length. • If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged. • If you select "Always request password while projector turns on", you are requested to input the password every time the projector is turned on. 36 English Security Administrator Password You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays. • Press to change "Administrator Password". • The factory default of "Administrator Password" is "1234". If you forget your administrator password, do the following to retrieve the administrator password: • Enter the unique 6-digit "Universal Password" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is. • If the Security Card is lost, please contact your local Acer service center. Lock User Startup Screen This function is set to "OFF" by default. If set to "ON", the startup screen is locked and cannot be changed by the "Startup Screen" and "Screen Capture" functions. 37 Management English Audio ECO Mode Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. High Altitude Choose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full speed continuously to cool down the projector’s temperature. Turn Off Mode • Instant Off: Enables you to turn off the projector immediately without fan cooling process by pressing the power button twice. • Instant Resume: Enables you to restart the projector immediately within 2 minutes after turning it off. Auto Shutdown (Minutes) The projector will automatically shut down while there is no signal input detected after the time you set. AC Power On Selecting "On" enables the function. The projector will automatically turn on when power is supplied via the power cord. Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours). Lamp Reminding Choose this function to show or hide warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life. Lamp Hour Reset Press after choosing "Yes" to reset the lamp hour counter to 0 hours. Volume • Press to decrease the volume. • Press to increase the volume. BT Speaker Connection • Bluetooth: Selecting "On" enables the function. • Bluetooth Search: Press to search for available devices. Select a device in the list of found devices. The projector will automatically try to connect to the last connected device the next time you enable the Bluetooth function. Mute • Choose "On" to turn mute on. • Choose "Off" to turn mute off. Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. 38 English 3D Alarm Volume Select this function to adjust the volume of any warning notifications. 3D Selects "On" to enable the 3D function supported by DLP 3D technology. • On: Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card and HQFS format file or DVD with corresponding SW player. • Off: Turns off the 3D mode. 2D to 3D • 2D to 3D: Converts 2D contents to 3D. Note that DLP 3D glasses are required to obtain the best 3D effect. • Mode: Provides several preset 2D to 3D conversion modes for your selection. You can also select User and use the "Convergence" and "Depth" functions described below to setup your customized conversion mode. • Convergence: Changes the convergence effect that is used when converting 2D contents to 3D. • Depth: Adjusts the image depth of 3D objects. "Depth" and "Convergence" are only available when "Mode" is set to "User". 3D Format If the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result. 3D Sync Invert If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/right image sequence to get the correct image (for DLP 3D). 24P 3D Choose 96Hz or 144Hz for 24p 3D. 3D Warning Message Choose "On" to display the 3D warning message. 39 English Note: Supported 3D signal timings: It needs correct settings on graphics card 3D application program for correct 3D display. The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on the web page below. - Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html Note: "3D Sync Invert" and "3D Format" are only available when "3D" is enabled. Language Signal source type Supported timing Video/S-Video/Component video HQFS 3D (480i@60Hz), 576i@50Hz VGA/HDMI (PC mode) 640 x 480@50/60/100/120Hz 800 x 600@50/60/100/120Hz 1024 x 768@50/60/100/120Hz 1280 x 800@50/60/100/120Hz (RB) HDMI (Video mode) HQFS 3D (480i@60Hz) , 576i@50Hz, Frame Packing (1080p@23.98/24Hz, 720p@50/60Hz) Side-by-Side Horizontal (1080i@50/60Hz, 1080p@50/60Hz) Top-and-Bottom (720p@50/60Hz, 1080p@23.97/24Hz, 1080p@50/60Hz) Language Sets a language for the OSD menus. Use to select your preferred language. 40 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears onscreen • Make sure all the cables are correctly connected as described in the "Getting Started" section. • Ensure none of the connector pins are bent or broken. • Make sure the projector is switched on. 2 Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ Win7/Vista)) • Press "RESYNC" on the control panel or remote control. • For an incorrectly displayed image: • Open "My Computer > Control Panel," and then double-click the "Display" icon. • Select the "Settings" tab. • Verify that your display resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. • Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: • Verify that the resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. • Click the "Change" button under the "Monitor" tab. • Click "Show all devices > Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. • Verify that the resolution setting of the monitor display is lower than or equal to 1600 x 1200 or 1920 x 1080. 41 English 3 Partial, scrolling or incorrectly displayed image (For notebooks) • Press "RESYNC" on the control panel or remote control. • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] • If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. 4 The screen of the notebook computer is not displaying your presentation • If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. • If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On." 5 Image is unstable or flickering • Use "Tracking" to correct it. Refer to the "Image" section for more information. • Change the display color setting on your computer. 6 Image has vertical flickering bar • Use "Frequency" to make an adjustment. Refer to the "Image" section for more information. • Check and reconfigure the display mode of your graphics card to make it compatible with the projector. 7 Image is out of focus • Adjust the focus ring on the projector lens. • Make sure the projection screen is within the required distance: X1185/X1185N/P1185/X1285/X1285N/P1285/P1385W/ X1385WH: 4.6 to 24.9 feet (1.4 to 7.6 meters) S1285: 4.9 to 24.9 feet (1.5 to 7.6 meters) H6518BD: 3.8 to 24.9 feet (1.15 to 7.6 meters) Refer to the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section for more information. 42 English Problems with the Projector 8 Image is stretched when displaying a "widescreen" DVD title When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. 9 Image is too small or too large • Adjust the zoom lever on the top of the projector. • Move the projector closer to or further from the screen. • Press "MENU" on the control panel or remote control. Go to "Image" > "Aspect Ratio" and try different settings. 10 Image has slanted sides • If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. • Press the Keystone correction keys on the control panel or remote control until the image becomes square. • Press "MENU" on the control panel or remote control to open the OSD menu. Go to "Image" > "Auto Keystone" or "Image" > "Keystone" to make adjustments. 11 Image is reversed • Select "Image" > "Projection Mode", "Image" > "Projection Location" on the OSD and adjust the projection direction. # Condition Solution 1 The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center. 43 English OSD Messages # Condition Message Reminder 1 Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Fan Fail. Lamp will automatically turn off soon. Projector Overheated. Lamp will automatically turn off soon. Lamp is approaching the end of its useful life in full power operation. Replacement suggested! 44 English LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Red Blue Red Red Standby (Power cord plugged in) V -- -- -- Power on -- V -- -- Lamp retry -- Quick flashing -- -- Turning off (Cooling state) Quick flashing -- -- -- Turning off (Cooling completed) V -- -- -- Error (Thermal failure) -- V -- V Error (Fan lock failure) -- V -- Quick flashing Error (Lamp breakdown) -- V V -- Error (Color wheel failure) -- V Quick flashing -- 45 Using the inner connector(s) English Turn the projector off by pressing (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord. 1 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1) 2 Push up and remove the cover. (Illustration #2) 3 Locate the HDMI (MHL) connector beside the focus/zoom ring. 4 Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into the HDMI (MHL) connector. (Illustration #3) 5 A micro USB cable is also available if you need to power the HDMI/MHL dongle. 6 Replace the cover and tighten the screw(s). (Illustration #4 - #5) 3 2 1 1 5 4 5 46 English Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of cylinder screws. 20 mm 13 mm 8.4 mm 130 mm 49.9 mm Short Rod Screw Type A 50 mm length / 8 mm diameter - Ceiling Mount Base - Attach to ceiling Long Rod Extension Rod Allen Key - For tighten/loosen Tightening Screw Medium Rod Large Cylinder Cap 47 3 Use the appropriate number of screws for the projector size to attach the English projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Smaller Washer Large Washer Projector Bracket Supports projector and allows for adjustments Screw Type B Spacer - For heat dissipation Screw Type A 50 mm length - /8 mm diameter Large Cylinder Cap Allen Key - For tighten/loosen Tightening Screw 48 English 5 Adjust the angle and positioning as necessary. Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 4 25 V V 30 Allen Key Tightening Screw Allen Key Tightening Screw 121.61 mm 89.40 mm 19.23 mm 48.39 mm 49 English Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation. Projection system DLP™ Resolution • X1185/X1185N/P1185: Native: SVGA (800 x 600) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) • X1285/X1285N/S1285/P1285: Native: XGA (1024 x 768) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) • P1385W/X1385WH: Native: WXGA (1280 x 800) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) • H6518BD Native: 1080p (1920 x 1080) Maximum: WUXGA (1920 x 1200) (supports reduce blanking only) Computer compatibility Refer to the "Compatibility Modes" section for more information. Video compatibility NTSC (3.58/4.43), PAL (M/N), PAL 60, SECAM, HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Aspect ratio • X1185/X1185N/P1185/X1285/X1285N/S1285/ P1285: Auto, 4:3 (native), 16:9 • P1385W/X1385WH/H6518BD: Auto, 4:3, 16:9, Full, L.Box Displayable colors 1.07 billion colors Projection lens • X1185/X1185N/P1185: F = 2.56 - 2.68, f = 22.04 mm - 24.14 mm, 1:1.1 Manual Zoom and Manual Focus • X1285/X1285N/P1285: F = 2.56 - 2.8, f = 21.00 mm - 23.10 mm, 1:1.1 Manual Zoom and Manual Focus • S1285: F = 2.6, f = 6.9 mm, 1:1.0 Manual Zoom and Manual Focus • P1385W/X1385WH: F = 2.56 - 2.8, f = 21.00 mm - 23.10 mm, 1:1.1 Manual Zoom and Manual Focus • H6518BD: F = 2.59 - 2.87, f = 16.88 mm - 21.88 mm, 1:1.3 Manual Zoom and Manual Focus 50 English Projection screen size (diagonal) with clear focus • X1185/X1185N/P1185: 54" (138 cm) - 300" (762 cm) • X1285/X1285N/P1285: 55" (138 cm) - 300" (762 cm) • S1285: 60" (152 cm) - 300" (762 cm) • P1385W/X1385WH: 55" (139 cm) - 300" (762 cm) • H6518BD: 45" (115 cm) - 300" (762 cm) Projection distance with clear focus • X1185/X1185N/P1185: 7.8' (2.4 m) - 39.2' (11.9 m) • X1285/X1285N/P1285: 7.4' (2.3 m) - 37.2' (11.3 m) • S1285: 2.4' (0.7 m) - 12.2' (3.7 m) • P1385W/X1385WH: 6.4' (1.9 m) - 31.8' (9.7 m) • H6518BD: 4.9' (1.5 m) - 25.1' (7.6 m) Throw ratio • X1185/X1185N/P1185/X1285/X1285N/P1285: 78"±3% @ 3.1 m (1.96 - 2.15) • S1285: 78"±3% @ 0.96 m (0.61) • P1385W/X1385WH: 87"±3% @ 2.9 m (1.55 - 1.7) • H6518BD: 95"±3% @ 2.42 m (1.15 - 1.5) Horizontal scan rate 31 - 99 KHz Vertical refresh scan rate 23 - 120 Hz Keystone correction • P1185/P1285/P1385W/X1385WH/H6518BD: +/-40 Degrees (Vertical), Manual & Auto • X1185/X1185N/X1285/X1285N/S1285: +/-40 Degrees (Vertical), Manual Digital zoom 2 X Audio • X1185/X1185N/X1285/X1285N/S1285/P1185/ X1385WH: 3W x 1 • P1285/P1385W/H6518BD: 10W x 1 Weight Approximate 3.3 kg (7.26 lbs.) Dimensions (W x D x H) 415 x 320 x 180 mm (13.6’ x 10.5’ x 5.9’) Power supply Universal AC input 100 - 240 V, input frequency 50/60 Hz 51 Power consumption (typical) • X1185/X1185N/P1185/X1285/X1285N/S1285/ English P1285/P1385W/X1385WH: 190 W • H6518BD: 210 W Operating temperature 0ºC to 40ºC / 32ºF to 104ºF I/O connectors X1185/X1185N/X1285/X1285N/S1285: • Power socket x 1 • USB (Type mini B) x 1 • VGA input x 2 • VGA output x 1 • RS232 x 1 • Composite video x 1 • S-Video x 1 • 3.5 mm audio jack input x 2 • 3.5 mm audio jack output x 1 P1185/X1385WH: • Power socket x 1 • USB (Type mini B) x 1 • VGA input x 2 • VGA output x 1 • RS232 x 1 • Composite video x 1 • S-Video x 1 • HDMI/MHL x 1 • USB Type A (DC 5V OUT) x 1 • 3.5 mm audio jack input x 2 • 3.5 mm audio jack output x 1 52 English * Design and specifications are subject to change without notice. P1285/P1385W: • Power socket x 1 • USB (Type mini B) x 1 • VGA input x 2 • VGA output x 1 • RS232 x 1 • Composite video x 1 • S-Video x 1 • HDMI/MHL x 2 • USB Type A (DC 5V OUT) x 1 • 3.5 mm audio jack input x 2 • 3.5 mm audio jack output x 1 • Micro USB cable x 1 H6518BD: • Power socket x 1 • USB (Type mini B) x 1 • VGA input x 1 • VGA output x 1 • Component video input x 1 • RS232 x 1 • Composite video x 1 • S-Video x 1 • HDMI/MHL x 2 • USB Type A (DC 5V OUT) x 1 • 3.5 mm audio jack input x 2 • 3.5 mm audio jack output x 1 • Micro USB cable x 1 Standard package contents • AC power cord x 1 • VGA cable x 1 • Remote control x 1 • Battery x 2 (for the remote control) • User's guide (CD-ROM) x 1 • Quick start guide x 1 • Security card x 1 Accessory (optional) • Composite video cable x 1 • Carrying case x 1 • Dust filter x 1 • WirelessHD dongle kit (MWIHD1) x 1 53 English Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640 x 480 60 31.47 72 37.86 75 37.50 85 43.27 120 61.91 SVGA 800 x 600 56 35.20 60 37.88 72 48.08 75 46.88 85 53.67 120 77.43 XGA 1024 x 768 60 48.36 70 56.48 75 60.02 85 68.68 120 98.96 SXGA 1152 x 864 70 63.85 75 67.50 85 77.10 1280 x 1024 60 63.98 72 76.97 75 79.98 85 91.15 QuadVGA 1280 x 960 60 60.00 1280 x 960 75 75.00 SXGA+ 1400 x 1050 60 65.32 UXGA 1600 x 1200 60 75.00 PowerBook G4 640 x 480 60 31.50 640 x 480 66.6 (67) 35.00 800 x 600 60 37.88 1024 x 768 60 48.36 1024 x 768 75 60.241 1152 x 870 75 68.681 54 English 2 HDMI - PC Signal WXGA 1280 x 768 60 47.78 1280 x 768 75 60.29 1280 x 768 85 68.63 1280 x 720 60 45.00 1280 x 800 60 49.70 1280 x 800 - RB 120 101.6 1440 x 900 60 55.94 1680 x 1050 60 65.29 1366 x 768 60 47.71 1920 x 1080-RB 60 66.60 1920 x 1080-EIA 60 67.50 1024 x 600 60 37.50 1920 x 1200-RB 59.95 74.04 Mode Resolution V.Frequency [Hz] H.Frequency [KHz] VGA_60 640 x 480 59.94 31.469 VGA_72 72.809 37.861 VGA_75 75 37.5 VGA_85 85.008 43.269 VGA_120 119.518 61.91 SVGA_56 800 x 600 56.25 35.156 SVGA_60 60.317 37.879 SVGA_72 72.188 48.077 SVGA_75 75 46.875 SVGA_85 85.061 53.674 SVGA_120 119.854 77.425 XGA_60 1024 x 768 60.004 48.363 XGA_70 70.069 56.476 XGA_75 75.029 60.023 XGA_120 119.804 98.958 SXGA_75 1152 x 864 75 67.5 SXGA_85 84.99 77.094 SXGA_60 1280 x 1024 60.02 63.981 SXGA_72 72 76.97 SXGA_75 75.025 79.976 SXGA_85 85.024 91.146 QuadVGA_75 1280 x 960 75 75 55 English 3 HDMI - Video Signal SXGA+_60 1400 x 1050 59.978 65.317 UXGA_60 1600 x 1200 60 75 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 35 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60.004 48.363 MAC19 1024 x 768@75Hz 75.02 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 WXGA_60 1280 x 768 59.87 47.776 WXGA_75 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 60 45 WXGA_60 1280 x 800 59.81 49.702 WXGA_120-RB 1280 x 800 119.909 101.563 WXGA+_60 1440 x 900 59.887 55.935 1680x1050_60 1680 x 1050 59.954 65.29 acer_16:9 1366 x 768 59.79 47.712 1920 x 1080_RB 1920 x1080 60 66.587 1920 x 1080_EIA 1920 x1080 60 67.5 acer_timing 1024 x 600 60 37.5 1920 x 1200-RB 1920 x 1200 59.95 74.038 Mode Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720 x 480 (1440 x 480) 60 15.73 480p 720 x 480 60 31.47 576i 720 x 576 (1440 x 576) 50 15.63 576p 720 x 576 50 31.25 720p 1280 x 720 60 45.00 720p 1280 x 720 50 37.50 1080i 1920 x 1080 60 33.75 1080i 1920 x 1080 50 28.13 1080p 1920 x 1080 60 67.50 1080p 1920 x 1080 50 56.26 1080p 1920 x 1080 24 27.00 1080p 1920 x 1080 23.98 26.97 56 English 4 MHL - Video Signal 5 YPbPr Signal 6 Video, S-Video Signal Mode Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720 x 480 (1440 x 480) 60 15.73 480p 720 x 480 60 31.47 576i 720 x 576 (1440 x 576) 50 15.63 576p 720 x 576 50 31.25 720p 1280 x 720 60 45.00 720p 1280 x 720 50 37.50 1080i 1920 x 1080 60 33.75 1080i 1920 x 1080 50 28.13 1080p 1920 x 1080 24 27.00 1080p 1920 x 1080 23.98 26.97 1080p 1920 x 1080 30 33.75 Mode Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720 x 480 59.94 15.73 480p 720 x 480 59.94 31.47 576i 720 x 576 50.00 15.63 576p 720 x 576 50.00 31.25 720p 1280 x 720 60.00 45.00 720p 1280 x 720 50.00 37.50 1080i 1920 x 1080 60.00 33.75 1080i 1920 x 1080 50.00 28.13 1080p 1920 x 1080 60.00 67.5 1080p 1920 x 1080 50.00 56.26 1080p 1920 x 1080 24.00 27.00 1080p 1920 x 1080 23.98 26.97 Mode V.Frequency [Hz] H.Frequency [KHz] fsc (MHz) NTSC 15.73 60 3.58 PAL 15.63 50 4.43 SECAM 15.63 50 4.25 or 4.41 PAL-M 15.73 60 3.58 PAL-N 15.63 50 3.58 PAL-60 15.73 60 4.43 NTSC4.43 15.73 60 4.43 57 EnglishEnglish Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. 58 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. b Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. 59 EnglishEnglish List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. 60 English Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: DLP Projector Trade Name: Acer Model Number: X1185/X1285/S1285/ P1185/P1285/P1385W/X1385WH/H6518BD series To which this declaration refers conforms to the relevant standard or other standardizing documents: • EN55022:2010 Class B; EN 55024:2010 • EN61000-3-2:2006+A1:2009+A2:2009, Class A • EN61000-3-3:2008 • EN 60950-1:2006/A11:2009/A1:2010+A12:2011 • Regulation (EC) No. 1275/ 2008; EN 62301:2005 • EN50581:2012 We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/ 65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. Year to begin affixing CE marking 2015. Jan. 26, 2015 - RU Jan/Sr. Manager Date Regulation Center, Acer Inc. 61 EnglishEnglish Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /Importer is responsible for this declaration: Product: DLP Projector Model Number: QSV1407/QSV1502/QNX1408/ QNX1501/QNX1419/QSV1410/ QNX1411/QWX1413/QWX1409/ H1P1418 series Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. Suite 1500 San Jose, CA 95110 U. S. A. Contact Person: Acer Representative Phone No.: 254-298-4000 Fax No.: 254-298-4147 Congratulations! This product is TCO Certified for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory. This product has been verified to meet all the criteria in TCO Certified, including: Corporate Social Responsibility Socially responsible production - working conditions and labor law in manufacturing country Energy Efficiency Energy efficiency of product and power supply. Energy Star compliant, where applicable Environmental Management System Manufacturer must be certified according to either ISO 14001 or EMAS Minimization of Hazardous Substances Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free products, halogenated substances and hazardous flame retardants Design for Recycling Coding of plastics for easy recycling. Limit on the number of different plastics used. Product Lifetime, Product Take Back Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback Packaging Limits on hazardous substances in product packaging. Packaging prepared for recycling Ergonomic, User-centered design Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets) Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers) Ergonomically designed keyboard (notebooks) Electrical Safety, minimal electro-magnetic Emissions Third Party Testing All certified product models have been tested in an independent, accredited laboratory. A detailed criteria set is available for download at www.tcodevelopment.com, where you can also find a searchable database of all TCO Certified IT products. TCO Development, the organization behind TCO Certified, has been an international driver in the field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit organization representing office workers. TCO Development is headquartered in Stockholm, Sweden, with regional presence in North America and Asia. For more information, please visit www.tcodevelopment.com Only P1285/X1285/P1385W/X1385WH is TCO Certified.