visable.png

Skip header
 

Pausing Copy When Using the Finisher SR4050

Use the following procedure to temporarily interrupt a long copy run when using the Finisher SR4050.

1Press the [Suspend/Resume] key.

The key lights up.

Finisher suspend/resume key illustration

2Remove the stack of paper from the finisher shift tray.

3Press the [Suspend/Resume] key.

The key turns off, and then copying restarts.

Finisher illustration

Note

  • You can suspend copy only when the output tray is specified as the finisher shift tray.

  • Depending on the print image, the prints might not be stacked properly. In such a case, pause printing, remove the prints, and then resume printing.