visable.png

Skip headerimage
ManualsContentsPreviousNextHelp

Windows 2000 - USB

Important

If the printer driver has already been installed, and plug and play is enabled, the icon of the machine connected to the "USB" port is added to the [Printers] window.

If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from the CD-ROM provided with this machine.

  1. Check that the power of the printer is off.

  2. Connect the machine and computer using the USB cable.

    Connect the USB cable firmly.

  3. Turn on the power of the machine.

    Found New Hardware Wizard starts, and USB Printing Support is installed automatically.

  4. In the Found New Hardware Wizard window, click [Next >].

  5. Click [Search for a suitable driver for my device [recommended]], and then click [Next >].

  6. Insert the CD-ROM in the CD-ROM drive.

    If Auto Run starts, click [Cancel] and then [Exit].

  7. Select the [CD-ROM drives] check box, and then click [Next >].

  8. Specify the location where the source files of the printer driver is stored.

    If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:

    • RPCS

      D:\DRIVERS\RPCS\XP_VISTA\(Language)\DISK1

    • PCL 5e

      D:\DRIVERS\PCL5E\XP_VISTA\(Language)\DISK1

    • PCL 6

      D:\DRIVERS\PCL6\XP_VISTA\(Language)\DISK1

    • PostScript 3

      D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1

  9. Check the printer driver location, and then click [OK].

  10. Click [Next >].

  11. Click [Finish].

    If the installation is successful, the icon of the machine connected to the "USB001" port is added to the [Printers] window.

Note