Manage Printers permission is required to install the drivers. Log on as an Administrators group member.
If the printer driver has already been installed, and plug and play is enabled, the icon of the machine connected to the "USB" port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from the CD-ROM provided with this machine.
Check that the power of the printer is off.
Connect the machine and computer using the USB cable.
Connect the USB cable firmly.
Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
In the Found New Hardware Wizard window, click [Install from a list or specific location [Advanced]], and then click [Next >].
Insert the CD-ROM in the CD-ROM drive.
If Auto Run starts, click [Cancel] and then [Exit].
Select the [Search removable media (floppy, CD-ROM...)] check box under [Search for the best driver in these locations], and then click [Next >].
Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
RPCS
D:\DRIVERS\RPCS\XP_VISTA\(Language)\DISK1
PCL 5e
D:\DRIVERS\PCL5E\XP_VISTA\(Language)\DISK1
PCL 6
D:\DRIVERS\PCL6\XP_VISTA\(Language)\DISK1
PostScript 3
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
Check the printer driver location, and then click [OK].
Enter the path to the file, and then click [OK].
Click [Next >].
Click [Finish].
If the installation is successful, the icon of the machine connected to the "USB001" port is added to the [Printers] window.
To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.
The number after "USB" varies depending on the number of printers connected.
