   |  |  | |
 | |||
 | |||
 |  |  |  |
 |   Manuals Contents Previous Next |   | |
This section describes the user tools in the Tray Paper Settings menu under System Settings.
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
Tray Paper Size: Tray 2 - 3
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 2 - 3 are as follows:
[Auto Detect]
[11 × 17
], [11 × 15], [11 × 14], [10 × 15], [81/2 × 14], [81/2 × 13], [81/2 × 11], [81/4 × 14], [81/4 × 13], [8 × 13], [8 × 101/2], [71/4 × 101/2], [51/2 × 81/2], [A3], [A4], [A5], [B4 JIS], [B5 JIS], [210 × 340m/m], [8K], [16K]
[81/2 × 11
], [71/4 × 101/2], [51/2 × 81/2], [A4], [A5], [B5 JIS], [182 × 210m/m], [170 × 210m/m], [16K],
[Custom size]
You can specify a custom size of between 5.5 - 11.7 inch (139.7 - 297.0 mm) vertically, and between 5.5 - 17.0 inch (139.7 - 432.0 mm) horizontally. When finisher SR4030 / 4040 is installed, horizontal size is between 5.5 - 19.2 inch (139.0 - 487.6 mm).
For details about auto detect paper size, see About This Machine.
Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
[Auto Detect]
[11 × 17], [11 × 14], [81/2 × 14], [81/2 × 13], [81/2 × 11], [81/4 × 13], [8 × 13], [71/4 × 101/2], [51/2 × 81/2][A3], [A4], [A5], [A6], [B4 JIS], [B5 JIS], [B6 JIS],
[81/2 × 11], [71/4 × 101/2], [51/2 × 81/2], [A4], [A5], [B5 JIS]
[Custom Size]
You can specify a custom size of between 4.0 - 12.0 inch (100.0 - 305.0 mm) vertically, and between 5.5 - 23.7 inch (139.7 - 600.0 mm) horizontally.
When finisher SR4030 / 4040 is installed, horizontal size is between 5.5 - 19.2 inch (139.0 - 487.6 mm).
When finisher SR4050 is installed, horizontal size is between 5.5 - 18.1 inch (139.0 - 458 mm).
For details about auto detect paper size, see About This Machine.
For details about specifying custom paper sizes, contact your sales or service representative.
Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
[No Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Letterhead], [Label Paper], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [OHP (Transparency)]
The paper thicknesses you can set for the bypass tray are as follows:
[Plain Paper] (52 - 80 g/m2, 14.0 - 20.0 lb. Bond)
[Middle Thick] (81 - 103 g/m2, 21.0 - 28.0 lb. Bond)
[Thick Paper] (104 - 216 g/m2, 39.0 - 80.0 lb. Cover)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 1
Sets the display so you can see what type of paper is loaded in the paper tray 1.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 1 are as follows:
[No Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Letterhead], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Prepunched Paper]
The paper thicknesses you can set for the paper tray 1 are as follows:
[Plain Paper] (52 - 80 g/m2, 14.0 - 20.0 lb. Bond)
[Middle Thick] (81 - 103 g/m2, 21.0 - 28.0 lb. Bond)
[Thick Paper] (104 - 216 g/m2, 39.0 - 80.0 lb. Cover)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
The default setting for "Apply Duplex" is [Yes].
The default setting for "Apply Auto Paper Select" is [Yes].
The key mark is displayed next to the paper tray if [No] is selected in "Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 2 - 3
Sets the display so you can see what type of paper is loaded in the paper tray 2 - 3.
The print function uses this information to automatically select the paper tray.
When "Tab stock" is selected in the paper type, the tab position can be set between 0.0 and 0.6 inch in 0.1 inch increments by using [
] [
].
The default setting is 0.5 inch.
The paper types you can set for the paper tray 2 - 3:
[No Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Letterhead], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Prepunched Paper], [Tab Stock]
The paper thicknesses you can set for the paper tray 2-3 are as follows:
[Plain Paper] (52 - 80 g/m2, 14.0 - 20.0 lb. Bond)
[Middle Thick] (81 - 103 g/m2, 21.0 - 28.0 lb. Bond)
[Thick Paper] (104 - 216 g/m2, 39.0 - 80.0 lb. Cover)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
The default setting for "Apply Duplex" is [Yes].
The default setting for "Apply Auto Paper Select" is [Yes].
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type : LCT
Sets the display so you can see what type of paper is loaded in the LCT.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the LCT:
[No Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Letterhead], [Preprinted Paper], [Bond Paper], [Prepunched Paper]
The paper thicknesses you can set for the LCT are as follows:
[Plain Paper] (52 - 80 g/m2, 14.0 - 20.0 lb. Bond)
[Middle Thick] (81 - 103 g/m2, 21.0 - 28.0 lb. Bond)
[Thick Paper] (104 - 216 g/m2, 39.0 - 80.0 lb. Cover)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
The default setting for "Apply Duplex" is [Yes].
The default setting for "Apply Auto Paper Select" is [Yes].
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", about this machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Front Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.
The default setting is [Off].
When [At Mode Selected] is selected, front cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
Back Cover Sheet Tray
Specify which paper tray you want to load the back covers from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
The default setting is [Off].
When [At Mode Selected] is selected, back cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
The default setting is [Off].
When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
Designation Sheet 1 Tray, Designation Sheet 2 Tray
Specify which paper tray you want to load the chapter division sheets from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
The default setting is [Off].
When [At Mode Selected] is selected, designation sheet 1 tray or designation sheet 2 tray settings only appear when the cover function, slip sheet function or designation sheet tray is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
The paper guide for the LCT is fixed for A4, 81/2 × 11 size paper. Contact your service representative if you need to change the paper size.
When paper of the same type and size is loaded in two different paper trays and you want to specify tray for 2 Sided Copy. If one of the trays is specified as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
Functions using the front cover sheet tray setting are the front cover function and front/back cover function.
The function for using Designation sheet 1 tray or Designation sheet 2 tray is designate.
 |
 | Copyright (C) 2009 |
