This section describes the user tools in the Timer Settings menu under System Settings.
Auto Off Timer
After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy. This function is called "Auto Off".
The machine status after the Auto Off operation is referred to as "Sleep mode".
For the Auto Off Timer, specify the time to elapse before Auto Off.
The default setting is “1” minute.
The time can be set from 1 to 240 minutes, using the number keys.
Auto Off may not work when error messages appear.
Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power mode after copying has finished or the last operation is performed.
The default setting is “1” minute.
The time can be set from 1 to 240 minutes, using the number keys.
Auto Off may not work when error messages appear.
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after copying has finished or the last operation is performed.
Enter a time interval between 10 seconds and 240 minutes, using the number keys.
The default setting is “10” second (s).
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the function set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is [On], “60” second (s).
Copier / Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
If [Off] is selected, the machine does not automatically switch to the user code entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is [On], “60” second (s).
Facsimile Auto Reset Timer (facsimile)
Specify the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is “30” second (s).
Printer Auto Reset Timer (printer)
Specify the time to elapse before the printer function resets.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is [On], “60” second (s).
Scanner Auto Reset Timer (scanner)
Specify the time to elapse before the scanner function resets.
If [Off] is selected, the machine will not automatically switch to the user code entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is [On], “60” second (s).
Set Date
Set the date for the copier's internal clock using the number keys.
To change between year, month, and day, press [
] and [
].
Set Time
Set the time for the copier's internal clock using the number keys.
Enter the time using the 12-hour format (in 1 second increments).
To change between hours, minutes and seconds, press [] and [].
Auto Logout Timer
Specify whether or not to automatically log out a user when the user does not operate the machine for a specified period of time after logging in.
The time can be set from 60 to 999 seconds, in one second increments, using the number keys.
The default setting is [On], “180” second (s).
Weekly Timer Code
Set a password (using not more than eight digits) for turning on the power during the time periods when "Weekly Timer" turns off the machine's power. If you have selected "On", enter the password. When you select "on", you cannot use the machine even if you turn the power switch to "On", unless you enter the password. If you select "Off", you do not have to enter a password to switch on the machine, you need only turn the power switch to "On".
The default setting is [Off].
Weekly Timer: Monday – Sunday
Set the daily time when the power is switched on/off.
Power On Time
Power Off Time
Enter the time using the 12-hour system.
Enter the “hour” and “minute” using the number keys.
