



	Manuals Contents Previous Next

Top Page > About This Machine > Remarks > Where to Put Your Machine > Machine Environment > Optimum environmental conditions

Optimum environmental conditions

This section describes precautions when locating the machine.

Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might move or come down to cause an injury.

Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

When new, electrical devices containing volatile materials will normally release emissions into the air of their vicinity. For this reason, for the first few days after installation of a new device, strong ventilation inside the room where it is placed is necessary.

Machine sound levels exceeding LWAd > 63 dB (A) are not suitable for desk work environments, so place the machine in another room.

Temperature: 10 - 32°C (50 - 89.6°F) (humidity to be 54% at 32°C, 89.6°F)
Humidity: 15 - 80% (temperature to be 27°C, 80.6°F at 80%)
A strong and level base.
The machine must be level within 5 mm, 0.2 inches: both front to rear and left to right.
To avoid possible buildup of ozone, make sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m³/hr/person.