Preset Stamp

This section describes the user tools in the Preset Stamp menu under Stamp.

Stamp Language

You can select the language of the message printed in Stamp mode.

English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish

The default setting is English.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Stamp Priority

You can select the stamp type given priority when [Preset Stamp] is pressed.

The default setting is COPY.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Stamp Format

Specify how each of stamp is printed.

Stamp Position
Specify where to print the stamp.
The default setting is Top Right.
Adjust Stamp Position
You can adjust the print position of the stamp within the available ranges shown below.
- Metric version:
  "Top Left" - T/B: 4 - 144mm, L/R: 4 - 144mm
  "Top Center" - T/B: 4 - 144mm, L/R: 72 - 72mm
  "Top Right" - T/B: 4 - 144mm, L/R: 4 - 144mm
  "Center Left" - T/B: 72 - 72mm, L/R: 4 - 144mm
  "Center" - T/B: 72 - 72mm, L/R: 72 - 72mm
  "Center Right" - T/B: 72 - 72mm, L/R: 4 - 144mm
  "Bottom Left" - T/B: 4 - 144mm, L/R: 4 - 144mm
  "Bottom Center" - T/B: 4 - 144mm, L/R: 72 - 72mm
  "Bottom Right" - T/B: 4 - 144mm, L/R: 4 - 144mm
- Inch version:
  "Top Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
  "Top Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
  "Top Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
  "Center Left" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
  "Center" - T/B: 2.8 - 2.8 inches, L/R: 2.8 - 2.8 inches
  "Center Right" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
  "Bottom Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
  "Bottom Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
  "Bottom Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
Size
You can set the size of the stamp.
The default setting is 1X.
Density
You can set the pattern used to print the stamp.
- Normal
  The stamp is printed on the image. You cannot check which parts will overlap.
- Lighter
  The image can be seen through the stamp.
- Lightest
  The image appears even clearer than in the Lighter setting.
The default setting is Normal.
Page to Stamp
You can have the stamp printed on the first page or all pages.
The default setting is All Pages.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.