Covers

You can use this function to create cover sheets by adding additional pages of different paper, or copying existing pages onto different paper.

Before using this function, select the trays for covers under Front Cover Sheet Tray and/or Back Cover Sheet Tray in Tray Paper Settings. For details, see "Tray Paper Settings", Network and System Settings Guide.
You cannot specify the bypass tray as the Main Sheet Tray.
If you have selected Interposer for Front Cover Sheet Tray and/or Back Cover Sheet Tray in Tray Paper Settings, you cannot copy onto the cover sheets.
When selecting [Copy], select whether the front and back covers are copied 1-sided or 2-sided.

The Covers function includes Front Cover and Back Cover.

Front Cover

This function copies the first page of an original onto paper that has been specified for covers, or places a cover sheet before the first copy page.

Back Cover

This function copies the last page of an original onto paper that has been specified for covers, or places a cover sheet after the last copy page.

The back cover sheet should be the same size and orientation as the main sheets.
You can use paper of different size and orientation than the main sheets as the front cover sheet.
When stapling copies with the front cover whose size and orientation is different from the main sheets, the front cover sheet should be the same width in paper feed direction as the main sheets. For example, when the main sheet is A5, you can staple the copies with the front cover sheet of A4, but you cannot staple them with that of A4.
When you specify both front and back covers, the first and last pages of your original are copied on paper specified for use as a cover, or cover sheets are inserted before the first copy and after the last copy.
You can make a combined copy on the front cover sheet. For details about Front Cover Copy in Combine, see "Edit".
If Blank mode is selected, the cover will not be counted as a copy.
The settings made under Front Cover Sheet Tray and/or Back Cover Sheet Tray in User Tools determine whether or not the front and back covers are duplex printed.
- At Mode Selected... Settings made in Front Cover Sheet Tray and/or Back Cover Sheet Tray will take priority.
- Full Time... Settings made in Paper Type will take priority.
For details, see "System Settings", Network and System Settings Guide.