This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server Features.
Default settings are shown in bold type.
Shortcut Reduce/Enlarge
You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display.
You can also change registered Reduce/Enlarge ratios.
When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the number keys.
The default setting for “F1” is 71% (Metric version) / 73% (Inch version).
The default setting for “F2” is 141% (Metric version) / 155% (Inch version).
The default setting for “F3” is 93%.
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Reproduction Ratio
You can specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.
Metric version
25%
A3 
A5, 8 × 13 A5 (50%)
A3 8 × 13 (65%)
A3 A4, A4 A5 (71%)
B4 JIS 8 × 13 (75%)
8 × 13 A4, B4 JIS A4 (82%)
93%
B4 JIS A3 (115%)
8 × 13 A3, A4 B4 JIS (122%)
A4 A3, A5 A4 (141%)
A5 A3 (200%)
400%
User Reduce/Enlarge Ratio (25-400%)
Inch version
25%
11 × 17 51/2 × 81/2 (50%)
11 × 17 81/2 × 11 (65%)
11 × 15 81/2 × 11 (73%)
81/2 × 14 81/2 × 11 (78%)
81/2 × 13 81/2 × 11 (85%)
93%
81/2 × 14 11 × 17 (121%)
81/2 × 11 11 × 17 (129%)
51/2 × 8 1/2 81/2 × 14 (155%)
51/2 × 8 1/2 11 × 17 (200%)
400%
User Reduce/Enlarge Ratio (25-400%)
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Reduce/Enlarge Ratio Priority
You can set the ratio with priority when [Reduce / Enlarge] is pressed.
The default setting is 71% (Metric version) / 65% (Inch version).
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.
Enter a ratio using number keys (in the range of 90 to 99%).
The default setting is 93%.
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
