Les cookies nous permettent de vous proposer nos services plus facilement. En utilisant nos services, vous nous donnez expressément votre accord pour exploiter ces cookies.En savoir plus OK
IBM Systems - iSeries AFP Utilities for iSeries Commands Version 5 Release 4
IBM Systems - iSeries AFP Utilities for iSeries Commands Version 5 Release 4
Revenir à l'accueil
Voir également :
Au format texte :
IBM Systems - iSeries
AFP Utilities for iSeries Commands
Version 5 Release 4
IBM Systems - iSeries
AFP Utilities for iSeries Commands
Version 5 Release 4
Note
Before using this information and the product it supports, be sure to read the information in
“Notices,” on page 39.
Second Edition (February 2006)
This edition applies to version 5, release 4, modification 0 of AFP Utilities for iSeries (product number 5722-AF1)
and to all subsequent releases and modifications until otherwise indicated in new editions. This version does not
run on all reduced instruction set computer (RISC) models nor does it run on CICS models.
© Copyright International Business Machines Corporation 1998, 2006. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Convert Overlay to PFM (CVTOVLPFM) 1
Convert Page Segment to PFM
(CVTPAGSPFM) . . . . . . . . . . . 5
Convert PCD to Page Segment
(CVTPCDPAGS) . . . . . . . . . . . 9
Convert PFM to Page Segment
(CVTPFMPAGS) . . . . . . . . . . . 15
Print PFD Data (PRTPFDDTA) . . . . . 23
Start AFP Utilities (STRAFPU) . . . . . 29
Start Overlay Utility (STROVLU) . . . . 31
Start Print Format Utility (STRPFU) . . 35
Appendix. Notices . . . . . . . . . . 39
© Copyright IBM Corp. 1998, 2006 iii
iv IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert Overlay to PFM (CVTOVLPFM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert Overlay to PFM
This command allows you to convert an overlay to a member in a physical database file.
Error messages for CVTOVLPFM
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
OVL Overlay Qualified object name Required,
Positional 1 Qualifier 1: Overlay Name
Qualifier 2: Library Name, *LIBL, *CURLIB
DTAFMT Format of data *FIXED, *CONTINUOUS Required,
Positional 2
FILE To file Qualified object name Required,
Positional 3 Qualifier 1: To file Name, *VM, *MVS
Qualifier 2: Library Name, *CURLIB
MBR To member Name, *OVL Optional,
Positional 4
TEXT Text ’description’ Character value, *OVLTXT Optional
REPLACE Replace *YES, *NO Optional
CRTFILE Create file *YES, *NO Optional
FILETEXT Text ’description’ Character value, *BLANK Optional
Top
Overlay (OVL)
Specifies the qualified name of the overlay that is converted. This is a required parameter.
The possible library values are:
*LIBL The library list is used to locate the overlay.
*CURLIB
The current library for the job is used to locate the overlay. If no library is specified as the current
library for the job, QGPL is used.
© Copyright IBM Corp. 1998, 2006 1
library-name
Specify the library where the overlay resides.
Top
Format of data (DTAFMT)
Specifies how data are filled in a physical file member.
The possible values are:
*FIXED
One record has one structured field. The padding character is binary 0s. The record length of the
file using fixed format is the longest length of the AFPDS structured fields in the overlay or the
page segment. If the length of the existing file is smaller than the longest length of the structured
field, an error message is displayed. If the length of the existing file is larger than the longest
length of the structured field, padding characters are added to the end of the records. This format
is for the VM system or the MVS system.
*CONTINUOUS
The structured fields are filled continuously and folded. Only the last record has padding
characters; the padding characters are binary 0s. Any record length of the existing file is allowed.
The created record length of the file is 256 bytes. This format is for the OS/2 system.
This is a required parameter.
Top
File (FILE)
Specifies the qualified name of the physical file being used to fill the overlay data.
The possible values are:
*VM Specifies that the name OVLY38PP is used. It will be a valid filetype for an overlay on the VM
system.
*MVS Specifies that the name O1xxxxxx is used. The ’xxxxxx’ is the first six valid characters of the
name specified in the OVL parameter. It will be a valid member name for an overlay on the MVS
system.
physical-file-name
Type the name of a physical file used to fill the overlay data.
The possible library values are:
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the current
library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
2 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Member (MBR)
Specifies the name of the physical file member which is filled with the overlay data.
The possible values are:
*OVL Specifies the name of the overlay specified in the OVL parameter.
member-name
Specify the name of a member used to fill the overlay data.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the member and its function.
The possible values are:
*OVLTXT
Specifies the same description specified in the OVL parameter.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the physical file member replaces the existing physical file member if a physical
file member of the same name already exists in the library.
The possible values are:
*NO A new physical file member is not created if an old physical file member of the same name
already exists in the library.
*YES A new physical file member is created and the old physical file member is replaced by it.
Top
Create file (CRTFILE)
Specifies whether or not the file is created if the file does not exist.
The possible values are:
*NO Do not create the file.
*YES Create the file.
Top
Convert Overlay to PFM (CVTOVLPFM) 3
Text ’description’ (FILETEXT)
Specifies text that briefly describes the file and its function. This prompt is valid only when CRTFILE
parameter is *YES.
The possible values are:
*BLANK
No text is specified.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
4 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert Page Segment to PFM (CVTPAGSPFM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert Page Segment to PFM
This command allows you to convert a page segment to a member in a physical database file.
Error messages for CVTPAGSPFM
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required,
Positional 1 Qualifier 1: Page segment Name
Qualifier 2: Library Name, *LIBL, *CURLIB
DTAFMT Format of data *FIXED, *CONTINUOUS Required,
Positional 2
FILE To file Qualified object name Required,
Positional 3 Qualifier 1: To file Name, *VM, *MVS
Qualifier 2: Library Name, *CURLIB
MBR To member Name, *PAGSEG Optional,
Positional 4
TEXT Text ’description’ Character value, *PSGTXT Optional
REPLACE Replace *YES, *NO Optional
CRTFILE Create file *YES, *NO Optional
FILETEXT Text ’description’ Character value, *BLANK Optional
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment that is converted. This is a required parameter.
The possible library values are:
*LIBL The library list is used to locate the page segment.
*CURLIB
The current library for the job is used to locate the page segment. If no library is specified as the
current library for the job, QGPL is used.
© Copyright IBM Corp. 1998, 2006 5
library-name
Specify the library where the page segment resides.
Top
Format of data (DTAFMT)
Specifies how data are filled in a physical file member.
The possible values are:
*FIXED
One record has one structured field. The padding character is binary 0s. The record length of the
file using fixed format is the longest length of the AFPDS structured fields in the overlay or the
page segment. If the length of the existing file is smaller than the longest length of the structured
field, an error message is displayed. If the length of the existing file is larger than the longest
length of the structured field, padding characters are added to the end of the records. This format
is for the VM system or the MVS system.
*CONTINUOUS
The structured fields are filled continuously and folded. Only the last record has padding
characters; the padding characters are binary 0s. Any record length of the existing file is allowed.
The created record length of the file is 256 bytes. This format is for the OS/2 system.
This is a required parameter.
Top
File (FILE)
Specifies the qualified name of the physical file being used to fill the page segment data.
The possible values are:
*VM Specifies that the name PSEG38PP is used. It will be a valid filetype for a page segment on the
VM system.
*MVS Specifies that the name S1xxxxxx is used. The ’xxxxxx’ is the first six valid characters of the name
specified in the PAGSEG parameter. It will be a valid member name for a page segment on the
MVS system.
physical-file-name
Type the name of a physical file used to fill the page segment data.
The possible library values are:
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the current
library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
6 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Member (MBR)
Specifies the name of the physical file member which is filled with the page segment data.
The possible values are:
*PAGSEG
Specifies the name of the page segment specified in the PAGSEG parameter.
member-name
Specify the name of a member used to fill the page segment data.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the member and its function.
The possible values are:
*PSGTXT
Specifies the same description specified in the PAGSEG parameter.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the physical file member replaces the existing physical file member if a physical
file member of the same name already exists in the library.
The possible values are:
*NO A new physical file member is not created if an old physical file member of the same name
already exists in the library.
*YES A new physical file member is created and the old physical file member is replaced by it.
Top
Create file (CRTFILE)
Specifies whether or not the file is created if the file does not exist.
The possible values are:
*NO Do not create the file.
*YES Create the file.
Top
Convert Page Segment to PFM (CVTPAGSPFM) 7
Text ’description’ (FILETEXT)
Specifies text that briefly describes the file and its function. This prompt is valid only when CRTFILE
parameter is *YES.
The possible values are:
*BLANK
No text is specified.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
8 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert PCD to Page Segment (CVTPCDPAGS)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert PCD to Page Segment
This command allows you to convert a PC document in a folder to a page segment. The PC document
must contain only one Image Data Stream (IMDS) or one Image Object Content Architecture (IOCA)
function set 10 image data stream.
Error messages for CVTPCDPAGS
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required, Key,
Positional 1 Qualifier 1: Page segment Name, *PRV
Qualifier 2: Library Name, *CURLIB
FRMFLR From folder Character value, *PRV Optional, Key,
Positional 2
FRMDOC From PC document Name, *PRV, *PAGSEG Optional, Key,
Positional 3
CHGIMGSIZE Change image size *SAME, *NO, *YES Optional,
Positional 4
IMGSIZE Image area size Element list Optional,
Positional 5 Element 1: Unit of measure *SAME, *INCH, *CM
Element 2: Width 0.1-57.79, *SAME
Element 3: Length 0.1-57.79, *SAME
MAPPING Mapping option *PAT, *STF, *CAT, *IPTP, *IPTPD, *SAME Optional,
Positional 6
IMGRTT Degree of rotation 0, 90, 180, 270, *SAME Optional,
Positional 7
CHGOFF Change image offset *NO, *YES Optional,
Positional 8
AUT Authority Name, *LIBCRTAUT, *CHANGE, *ALL, *USE, *EXCLUDE,
*SAME
Optional,
Positional 9
TEXT Text ’description’ Character value, *SAME, *BLANK Optional,
Positional 10
REPLACE Replace *NO, *YES Optional,
Positional 11
© Copyright IBM Corp. 1998, 2006 9
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment to be created. This is a required parameter.
The possible values are:
*PRV Specifies that the name of the page segment and library used when you performed this command
last is used. If you specify *PRV for the PAGSEG parameter, it is not necessary to specify a
library.
page-segment-name
Specifies the page segment name to be created.
The possible library values are:
*CURLIB
The current library for the job is used to create the page segment. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library in which the page segment will be created.
Top
From folder (FRMFLR)
Specifies the name of the folder that contains the PC document to be converted.
The possible values are:
*PRV Specifies the name of the folder used when you previously created a page segment of the same
name.
folder-name
Specifies the folder name.
Top
From PC document (FRMDOC)
Specifies the PC document name to be converted.
The possible values are:
*PRV Specifies the name of the PC document used when you previously created a page segment of the
same name.
*PAGSEG
Specifies the name of the page segment to be created is the same as the name of the PC
document.
PC-document-name
Specifies the PC document name that is to be converted.
Top
10 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Change image size (CHGIMGSIZE)
Specifies whether the size of the image in the page segment is changed or not.
The possible values are:
*SAME
Specifies the same value for this parameter used when you previously created a page segment of
the same name.
*NO Specifies not to change the image size.
*YES Specifies to change the image size.
If you specify *YES, the IMGSIZE and MAPOPT parameters will appear, and you can specify the
new image size in the page segment and how to map the input image to the size.
Top
Image area size (IMGSIZE)
Specifies the unit of measurement, width, and length of the image to be created in the page segment
when Change image size parameter is specified as *YES. This prompt is ignored when Change image size
is specified as *NO.
Unit of measure
Specifies the unit of measurement used to specify the following two parameters.
The possible values are:
*SAME
Specifies the unit of measurement used when you previously created a page segment of
the same name.
*INCH
Inch is used as the unit of measurement.
*CM Centimeter is used as the unit of measurement.
Width Specifies the width of the image to be created.
The possible values are:
*SAME
Specifies the value of the width used when you previously created a page segment of the
same name.
width-value
Specify the width value in the selected unit of measurement.
Length
Specifies the length of the image to be created.
The possible values are:
*SAME
Specifies the value of the length used when you previously created a page segment of the
same name.
length-value
Specify the length value in the selected unit of measurement.
Convert PCD to Page Segment (CVTPCDPAGS) 11
Top
Mapping option (MAPPING)
Specifies how the input image is mapped to the specified size of output image in the page segment when
Change image size parameter is specified as *YES. This prompt is ignored when Change image size is
specified as *NO.
The possible values are:
*SAME
Specifies the mapping option used when you previously created a page segment of the same
name.
*PAT (Position and trim)
The top left corner of the input image is located to the top left corner of the output image area.
The image size is not changed, and any portion of the input image that falls outside of the output
image size is trimmed.
*STF (Scale to fit)
The center of the input image is located to the center of the output image area. The image size is
changed so that the input image fits in the output image size.
*CAT (Center and trim)
The center of the input image is located to the center of the output image area. The image size is
not changed, and any portion of the input image that falls outside of the output image size is
trimmed.
*IPTP (Image point to pel)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is mapped to a pel of
the output printer. The image size may vary depending on the pel-density of the output printer,
and any portion of the input image that falls outside of the output image size is trimmed.
*IPTPD (Image point to pel with double dot)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is doubled (replicated)
in both dimensions and mapped to pels of the output printer. The image size may vary
depending on the pel-density of the output printer, and any portion of the input image that falls
outside of the output image size is trimmed.
Top
Degree of rotation (IMGRTT)
Specifies the degree of the clockwise rotation of the output image. The center of the rotation is the top left
corner of the image.
The possible values are:
*SAME
Specifies the degree of rotation used when you previously created a page segment of the same
name.
0 No rotation is done.
90 The image is rotated 90 degrees clockwise.
12 IBM Systems - iSeries: AFP Utilities for iSeries Commands
180 The image is rotated 180 degrees clockwise.
270 The image is rotated 270 degrees clockwise.
Top
Change image offset (CHGOFF)
A rotated IOCA image (page segment) created with no change in offset can be placed at the same point
on a rotated overlay, record layout, or page layout that the corresponding image that is not rotated is
placed on a layout that is not rotated.
If the option is used to change the offset, the upper left corner of the rotated image will be placed at the
specified point on the overlay or layout. This placement is the same as that used for IM1 raster images.
For an image rotated 90 degrees, the upper left corner is the same as the bottom left corner of an image
that is not rotated. For an image rotated 180 degrees, the upper left corner is the same as the bottom right
corner of an image that is not rotated.
The possible values are:
*NO Offset is not changed.
*YES Offset is changed so that the image must be placed on the layout the same as IM1 raster images.
Top
Authority (AUT)
Specifies the authority given to the user who does not have specific authority, who is not on the
authorization list, or whose user group has no specific authority to the created page segment. This value
is ignored and the current authority remains if a page segment already exists and this is replacing it.
The possible values are:
*SAME
Specifies the authority used when you previously created a page segment of the same name.
*LIBCRTAUT
The system determines the authority for the page segment by using the value specified for the
Create authority prompt (CRTAUT parameter) on the Create Library command (CRTLIB) for the
library containing the page segment to be created. If the value specified on the Create authority
prompt (CRTAUT parameter) is changed, the new value will not affect this page segment.
*CHANGE
Change authority allows the user to perform all operations on the page segment except those
limited to the owner or controlled by object existence authority and object management authority.
The user can change the page segment and perform basic functions on the page segment. Change
authority provides object operational authority and all data authority.
*ALL All authority allows the user to perform all operations on the page segment except those limited
to the owner or controlled by authorization list management authority. The user can control the
page segment’s existence, specify the security for the page segment, change the page segment,
and perform basic functions on the page segment. The user cannot transfer ownership of the
page segment.
*USE Use authority allows the user to perform basic operations on the page segment, such as read the
page segment. The user is prevented from changing the page segment. Use authority provides
object operational authority and read authority.
Convert PCD to Page Segment (CVTPCDPAGS) 13
*EXCLUDE
Exclude authority prevents the user from accessing the page segment.
authorization-list-name
Specify the name of an authorization list. Users included on the authorization list are granted
authority to the page segment as specified by the list. The authorization list must exist when the
page segment is created.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the page segment to be created.
The possible values are:
*SAME
Specifies the text used when you previously created a page segment of the same name.
*BLANK
Specifies the text is blank.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the page segment replaces the existing page segment if a page segment of the
same name already exists in the library.
The possible values are:
*YES A new page segment is created and the old page segment is replaced by it.
*NO A new page segment is not created if an old page segment of the same name already exists in the
library.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
14 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert PFM to Page Segment (CVTPFMPAGS)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert PFM to Page Segment
This command allows you to convert a member in a physical database file to a page segment. The
member must contain only one Image Data Stream (IMDS) or one Image Object Content Architecture
(IOCA) function set 10 image data stream.
Error messages for CVTPFMPAGS
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required, Key,
Positional 1 Qualifier 1: Page segment Name, *PRV
Qualifier 2: Library Name, *CURLIB
FILE From file Single values: *PRV
Other values: Qualified object name
Optional, Key,
Positional 2
Qualifier 1: From file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR From member Name, *PRV, *PAGSEG Optional, Key,
Positional 3
CHGIMGSIZE Change image size *SAME, *NO, *YES Optional,
Positional 4
IMGSIZE Image area size Element list Optional,
Positional 5 Element 1: Unit of measure *SAME, *INCH, *CM
Element 2: Width 0.1-57.79, *SAME
Element 3: Length 0.1-57.79, *SAME
MAPPING Mapping option *PAT, *STF, *CAT, *IPTP, *IPTPD, *SAME Optional,
Positional 6
IMGRTT Degree of rotation 0, 90, 180, 270, *SAME Optional,
Positional 7
CHGOFF Change image offset *NO, *YES Optional,
Positional 8
AUT Authority Name, *LIBCRTAUT, *CHANGE, *ALL, *USE, *EXCLUDE,
*SAME
Optional,
Positional 9
TEXT Text ’description’ Character value, *SAME, *BLANK Optional,
Positional 10
© Copyright IBM Corp. 1998, 2006 15
Keyword Description Choices Notes
REPLACE Replace *NO, *YES Optional,
Positional 11
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment to be created. This is a required parameter.
The possible values are:
*PRV Specifies that the name of the page segment and library used when you performed this command
last is used. If you specify *PRV for the PAGSEG parameter, it is not necessary to specify a
library.
page-segment-name
Specifies the page segment name to be created.
The possible library values are:
*CURLIB
The current library for the job is used to create the page segment. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library in which the page segment will be created.
Top
From file (FILE)
Specifies the qualified name of the physical file that contains the member to be converted.
The possible values are:
*PRV Specifies the file and library used when you previously created a page segment of the same
name.
file-name
Type the name of an existing physical database file to be used. If you do not specify a library
name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
16 IBM Systems - iSeries: AFP Utilities for iSeries Commands
From member (MBR)
Specifies the name of the physical file member to be converted.
The possible values are:
*PRV Specifies the member name used when you previously created a page segment of the same name.
*PAGSEG
Specifies the name of the page segment to be created is the same as the name of the member.
member-name
Specifies the member name that is to be converted.
Top
Change image size (CHGIMGSIZE)
Specifies whether the size of the image in the page segment is changed or not.
The possible values are:
*SAME
Specifies the same value for this parameter used when you previously created a page segment of
the same name.
*NO Specifies not to change the image size.
*YES Specifies to change the image size.
If you specify *YES, the IMGSIZE and MAPOPT parameters will appear, and you can specify the
new image size in the page segment and how to map the input image to the size.
Top
Image area size (IMGSIZE)
Specifies the unit of measurement, width, and length of the image to be created in the page segment
when Change image size parameter is specified as *YES. This prompt is ignored when Change image size
is specified as *NO.
Unit of measure
Specifies the unit of measurement used to specify the following two parameters.
The possible values are:
*SAME
Specifies the unit of measurement used when you previously created a page segment of
the same name.
*INCH
Inch is used as the unit of measurement.
*CM Centimeter is used as the unit of measurement.
Width Specifies the width of the image to be created.
The possible values are:
Convert PFM to Page Segment (CVTPFMPAGS) 17
*SAME
Specifies the value of the width used when you previously created a page segment of the
same name.
width-value
Specify the width value in the selected unit of measurement.
Length
Specifies the length of the image to be created.
The possible values are:
*SAME
Specifies the value of the length used when you previously created a page segment of the
same name.
length-value
Specify the length value in the selected unit of measurement.
Top
Mapping option (MAPPING)
Specifies how the input image is mapped to the specified size of output image in the page segment when
Change image size parameter is specified as *YES. This prompt is ignored when Change image size is
specified as *NO.
The possible values are:
*SAME
Specifies the mapping option used when you previously created a page segment of the same
name.
*PAT (Position and trim)
The top left corner of the input image is located to the top left corner of the output image area.
The image size is not changed, and any portion of the input image that falls outside of the output
image size is trimmed.
*STF (Scale to fit)
The center of the input image is located to the center of the output image area. The image size is
changed so that the input image fits in the output image size.
*CAT (Center and trim)
The center of the input image is located to the center of the output image area. The image size is
not changed, and any portion of the input image that falls outside of the output image size is
trimmed.
*IPTP (Image point to pel)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is mapped to a pel of
the output printer. The image size may vary depending on the pel-density of the output printer,
and any portion of the input image that falls outside of the output image size is trimmed.
*IPTPD (Image point to pel with double dot)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is doubled (replicated)
18 IBM Systems - iSeries: AFP Utilities for iSeries Commands
in both dimensions and mapped to pels of the output printer. The image size may vary
depending on the pel-density of the output printer, and any portion of the input image that falls
outside of the output image size is trimmed.
Top
Degree of rotation (IMGRTT)
Specifies the degree of the clockwise rotation of the output image. The center of the rotation is the top left
corner of the image.
The possible values are:
*SAME
Specifies the degree of rotation used when you previously created a page segment of the same
name.
0 No rotation is done.
90 The image is rotated 90 degrees clockwise.
180 The image is rotated 180 degrees clockwise.
270 The image is rotated 270 degrees clockwise.
Top
Change image offset (CHGOFF)
A rotated IOCA image (page segment) created with no change in offset can be placed at the same point
on a rotated overlay, record layout, or page layout that the corresponding image that is not rotated is
placed on a layout that is not rotated.
If the option is used to change the offset, the upper left corner of the rotated image will be placed at the
specified point on the overlay or layout. This placement is the same as that used for IM1 raster images.
For an image rotated 90 degrees, the upper left corner is the same as the bottom left corner of an image
that is not rotated. For an image rotated 180 degrees, the upper left corner is the same as the bottom right
corner of an image that is not rotated.
The possible values are:
*NO Offset is not changed.
*YES Offset is changed so that the image must be placed on the layout the same as IM1 raster images.
Top
Authority (AUT)
Specifies the authority given to the user who does not have specific authority, who is not on the
authorization list, or whose user group has no specific authority to the created page segment. This value
is ignored and the current authority remains if a page segment already exists and this is replacing it.
The possible values are:
*SAME
Specifies the authority used when you previously created a page segment of the same name.
Convert PFM to Page Segment (CVTPFMPAGS) 19
*LIBCRTAUT
The system determines the authority for the page segment by using the value specified for the
Create authority prompt (CRTAUT parameter) on the Create Library command (CRTLIB) for the
library containing the page segment to be created. If the value specified on the Create authority
prompt (CRTAUT parameter) is changed, the new value will not affect this page segment.
*CHANGE
Change authority allows the user to perform all operations on the page segment except those
limited to the owner or controlled by object existence authority and object management authority.
The user can change the page segment and perform basic functions on the page segment. Change
authority provides object operational authority and all data authority.
*ALL All authority allows the user to perform all operations on the page segment except those limited
to the owner or controlled by authorization list management authority. The user can control the
page segment’s existence, specify the security for the page segment, change the page segment,
and perform basic functions on the page segment. The user cannot transfer ownership of the
page segment.
*USE Use authority allows the user to perform basic operations on the page segment, such as read the
page segment. The user is prevented from changing the page segment. Use authority provides
object operational authority and read authority.
*EXCLUDE
Exclude authority prevents the user from accessing the page segment.
authorization-list-name
Specify the name of an authorization list. Users included on the authorization list are granted
authority to the page segment as specified by the list. The authorization list must exist when the
page segment is created.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the page segment to be created.
The possible values are:
*SAME
Specifies the text used when you previously created a page segment of the same name.
*BLANK
Specifies the text is blank.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the page segment replaces the existing page segment if a page segment of the
same name already exists in the library.
The possible values are:
*YES A new page segment is created and the old page segment is replaced by it.
*NO A new page segment is not created if an old page segment of the same name already exists in the
library.
20 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
Convert PFM to Page Segment (CVTPFMPAGS) 21
22 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Print PFD Data (PRTPFDDTA)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to print a database file member according to the design of a PFD definition.
Error messages for PRTPFDDTA
*ESCAPE Messages
AFP0010
An error occurred.
AFP0040
Database file &2 in library &1 cannot be allocated.
AFP22A0
Print request canceled.
Top
Parameters
Keyword Description Choices Notes
PFDFILE PFD file Qualified object name Required,
Positional 1 Qualifier 1: PFD file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
PFDMBR PFD definition Name, *FIRST Optional,
Positional 2
FILE Database file Single values: *PFD
Other values: Qualified object name
Optional,
Positional 3
Qualifier 1: Database file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR Member Name, *FIRST Optional,
Positional 4
GRID Include grid *YES, *NO, *YES, *NO Optional,
Positional 5
RCDSLT Record selection *YES, *NO, *YES, *NO Optional,
Positional 6
ENDPAGE Ending page 1-9999, *END Optional,
Positional 7
DRAWER Source drawer 1-255, *PFD, *E1, *CUT Optional,
Positional 8
OUTBIN Output bin 1-65535, *DEVD Optional,
Positional 9
COPIES Copies 1-255, *PFD Optional,
Positional 10
© Copyright IBM Corp. 1998, 2006 23
Keyword Description Choices Notes
OUTQ Output queue Single values: *JOB
Other values: Qualified object name
Optional,
Positional 11
Qualifier 1: Output queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
FORMDF Form definition Qualified object name Optional,
Positional 12 Qualifier 1: Form definition Name, *PFD, *DEVD, *INLINE
Qualifier 2: Library Name, *LIBL, *CURLIB
Top
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD definition to be used.
The possible values are:
PFD-definition-file-name
Type the name of an existing PFD definition file to be used. If you specify the
PFD-definition-file-name and a library name, print format utility searches the specified library for
the PFD definition file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
PFD definition (PFDMBR)
Specifies the name of the PFD definition to be used to print a database file member.
The possible values are:
*FIRST
This is the default value. The first PFD definition in the PFD definition file is used.
PFD-definition-name
Type the name of the PFD-definition you want to use.
Top
Database file (FILE)
Specifies the database file and library that contain the member to be printed.
The possible values are:
24 IBM Systems - iSeries: AFP Utilities for iSeries Commands
*PFD Specifies that the database file and library that are specified in the PFD definition are used to
print the member.
file-name
Type the name of an existing database file to be used. If you specify the file-name and a library
name, print format utility searches the specified library for the database file. If you do not specify
a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
Member (MBR)
Specifies the name of the member to be printed.
The possible values are:
*FIRST
This is the default value. The first member in the database file is printed.
member-name
Type the name of the member you want to print.
Top
Include grid (GRID)
Specifies whether a grid is included in the printout or not. A Grid consists of horizontal lines and vertical
lines, and the distance between horizontal lines and that between vertical lines are specified in the PFD
specifications.
The possible values are:
*NO This is the default value. A grid is not included in the printout.
*YES A grid is included in the printout.
Top
Record selection (RCDSLT)
Specifies whether the records are selected according to the selection conditions specified in the PFD
definition or not.
The possible values are:
*YES Type *YES if you want to select and print only those records that match the selection conditions
specified in the PFD definition.
Print PFD Data (PRTPFDDTA) 25
All records are printed if no conditions are specified in the PFD definition.
*NO Type *NO if you want to print all records regardless of the selection conditions specified in the
PFD definition.
Top
Ending page (ENDPAGE)
Specifies whether printing should stop at a certain page or continue until all records are processed.
The possible values are:
*END Specifies to print until all records are processed.
page-number
Specifies the last page number to be printed. Print format utility stops printing when the last
page specified by this parameter is printed. If all records have been processed before the last page
is printed, print format utility will stop printing.
The possible value range is 1 - 9999.
Top
Drawer (DRAWER)
Specifies the source drawer used when single-cut sheets are fed into the printer.
The possible values are:
*PFD The value specified in the Printout specifications is used. *PFD is the default.
*E1 Envelopes are fed from the envelope drawer on the sheet-feed paper handler.
*CUT For printers with manual feed, cut sheets are fed manually through the manual feeder.
source-drawer
Specify the drawer from which the paper is fed. Valid values range from 1 through 255. For
printers with manual feed, specifying 100 is the same as specifying *CUT.
Top
Output bin (OUTBIN)
Specifies the destination of the output on printers capable of multiple output bins.
The possible values are:
*DEVD
The value specified in the Device description is used. *DEVD is the default.
output-bin
Specify the output bin for the destination of the output. Valid values range from 1 through 65535.
Top
26 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Copies (COPIES)
Specifies the number of copies to be printed.
The possible values are:
*PFD Specifies that the number specified in the PFD definition is used.
This is the default value.
number-of-copies
Specifies the number of copies to be printed.
The possible value range is 1 - 255.
Top
Output queue (OUTQ)
Specifies the qualified name of the output queue in which the spooled file will be created.
The possible values are:
*JOB Specifies the output queue specified in the job description associated with this job is used.
This is the default value.
output-queue-name
Specifies the name of the output queue to be used.
The possible library values are:
*LIBL The library list is used to locate the output queue.
*CURLIB
The current library for the job is used to locate the output queue. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library where the output queue resides.
Top
Form definition (FORMDF)
Specifies the qualified name of the form definition to use when printing the spooled file.
The possible values are:
*PFD Specifies that the form definition and library that are specified in the PFD definition will be used
to print the member.
*DEVD
Specifies that the form definition specified in the device description for the printer will be used.
*INLINE
Specifies that the print format utility will create an inline form definition with the name F1AFPU
and use that form definition when printing the data. The page width and length specified in the
printout format definition will be placed in the created form definition for page control with
Print PFD Data (PRTPFDDTA) 27
continuous form printers. These values will be used when the page size control value for the
printer is set to *YES. Use the Work with PSF Configurations (WRKPSFCFG) command to set the
page size control value.
form-definition-name
Specifies the name of the form definition to be used.
The possible library values are:
*LIBL The library list is used to locate the form definition.
*CURLIB
The current library for the job is used to locate the form definition. If no library is
specified as the current library for the job, QGPL is used.
library-name
Specify the library where the form definition resides.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP0040
Database file &2 in library &1 cannot be allocated.
AFP22A0
Print request canceled.
Top
28 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start AFP Utilities (STRAFPU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
The command displays the main AFP Utilities menu that allows you to use the AFP Utilities functions.
There are no parameters for this command.
Error messages for STRAFPU
*ESCAPE Messages
AFP0010
An error occurred.
AFP10C0
Error occurred while AFPU main menu was displayed.
AFP22A0
Print request canceled.
AFP3303
Page segment &5 was not created in library &1.
Top
Parameters
None
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP10C0
Error occurred while AFPU main menu was displayed.
AFP22A0
Print request canceled.
AFP3303
Page segment &5 was not created in library &1.
© Copyright IBM Corp. 1998, 2006 29
Top
30 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start Overlay Utility (STROVLU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to perform an option of the overlay utility directly without viewing the Work
with Source Overlays display.
Error messages for STROVLU
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
FILE Source overlay file Single values: *PRV
Other values: Qualified object name
Optional,
Positional 1
Qualifier 1: Source overlay
file
Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR Source overlay Name, *PRV, *SELECT Optional,
Positional 2
OPTION Option *BLANK, ’ ’, 1, 2, 3, 4, 6, 7, 9 Optional,
Positional 3
Top
Source overlay file (FILE)
Specifies the source overlay file and library that contain the source overlay to be worked with.
The possible values are:
*PRV Specifies that the overlay utility is to use the name of the source overlay file and library used in
your last overlay utility session. If you specify *PRV for the FILE parameter, it is not necessary to
specify a library.
source-overlay-file-name
Type the name of an existing source overlay file to be used. If you specify the
source-overlay-file-name and a library name, overlay utility searches the specified library for the
source overlay file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
© Copyright IBM Corp. 1998, 2006 31
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
Source overlay (MBR)
Specifies the name of the source overlay to be worked with or created. The default value for this
parameter depends on if you specify the FILE parameter.
The possible values are:
*SELECT
This is the default value if you specify the FILE parameter. If you choose *SELECT, you will get
the lists of all source overlays in the specified source overlay file and library. Select one or more
source overlays to work with on the display.
*PRV This is the default value if you do not specify the FILE parameter. *PRV is the name of the
previous source overlay that was used.
source-overlay-name
Type the name of the source overlay you want to work with.
Top
Option (OPTION)
Specifies the function to perform on the selected source overlay.
The possible values are:
*BLANK or ’ ’
This is the default value if you do not specify a source overlay name. *BLANK specifies no
action.
1=Create
Type 1 to create a source overlay.
2=Change
This is the default value if you specify a source overlay name.
Type 2 to change a source overlay.
3=Copy
Type 3 to copy a source overlay.
4=Delete
Type 4 to delete a source overlay.
6=Print
Type 6 to print a source overlay.
7=Rename
Type 7 to rename a source overlay.
32 IBM Systems - iSeries: AFP Utilities for iSeries Commands
9=Create overlay
Type 9 to create an overlay from a source overlay.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
Start Overlay Utility (STROVLU) 33
34 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start Print Format Utility (STRPFU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to perform an option of print format utility directly without viewing the Work
with PFD Definitions display.
Error messages for STRPFU
*ESCAPE Messages
AFP0010
An error occurred.
AFP22A0
Print request canceled.
Top
Parameters
Keyword Description Choices Notes
PFDFILE PFD file Single values: *PRV
Other values: Qualified object name
Optional,
Positional 1
Qualifier 1: PFD file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
PFDMBR PFD definition Name, *PRV, *SELECT Optional,
Positional 2
OPTION Option *BLANK, ’ ’, 1, 2, 3, 4, 6, 7, 9 Optional,
Positional 3
Top
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD definition to be worked with.
The possible values are:
*PRV Specifies that the print format utility is to use the name of the PFD definition file and library
used in your last print format utility session. If you specify *PRV for the PFDFILE parameter, it is
not necessary to specify a library.
PFD-definition-file-name
Type the name of an existing PFD definition file to be used. If you specify the
PFD-definition-file-name and a library name, print format utility searches the specified library for
the PFD definition file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
© Copyright IBM Corp. 1998, 2006 35
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
PFD definition (PFDMBR)
Specifies the name of the PFD definition to be worked with or created. The default value for this
parameter depends on if you specify the PFDFILE parameter.
The possible values are:
*SELECT
This is the default value if you specify the PFDFILE parameter. If you choose *SELECT, you will
get the lists of all PFD definitions in the specified PFD definition file and library. Select one or
more PFD definitions to work with on the display.
*PRV This is the default value if you do not specify the PFDFILE parameter. *PRV is the name of the
previous PFD definition that was used.
PFD-definition-name
Type the name of the PFD-definition you want to work with.
Top
Option (OPTION)
Specifies the function to perform on the selected PFD definition. The default value depends on if you
specify a PFD definition name.
The possible values are:
*BLANK or ’ ’
This is the default value if you do not specify a PFD definition name. *BLANK specifies no
action.
1=Create
Type 1 to create a PFD definition.
2=Change
This is the default value if you specify a PFD definition name.
Type 2 to change a PFD definition.
3=Copy
Type 3 to copy a PFD definition.
4=Delete
Type 4 to delete a PFD definition.
6=Print
Type 6 to print a PFD definition.
7=Rename
Type 7 to rename a PFD definition.
36 IBM Systems - iSeries: AFP Utilities for iSeries Commands
9=Print database file
Type 9 to print a database file member by using a PFD definition.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP22A0
Print request canceled.
Top
Start Print Format Utility (STRPFU) 37
38 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Appendix. Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries.
Consult your local IBM representative for information on the products and services currently available in
your area. Any reference to an IBM product, program, or service is not intended to state or imply that
only that IBM product, program, or service may be used. Any functionally equivalent product, program,
or service that does not infringe any IBM intellectual property right may be used instead. However, it is
the user’s responsibility to evaluate and verify the operation of any non-IBM product, program, or
service.
IBM may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
500 Columbus Avenue
Thornwood, NY8809
U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property
Department in your country or send inquiries, in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any other country where such
provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of
the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the
exchange of information between independently created programs and other programs (including this
one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Corporation
© Copyright IBM Corp. 1998, 2006 39
Software Interoperability Coordinator, Department 49XA
3605 Highway 52 N
Rochester, MN 55901
U.S.A.
Such information may be available, subject to appropriate terms and conditions, including in some cases,
payment of a fee.
The licensed program described in this information and all licensed material available for it are provided
by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement, or
any equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of those products, their
published announcements or other publicly available sources. IBM has not tested those products and
cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM
products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of
those products.
This information contains examples of data and reports used in daily business operations. To illustrate
them as completely as possible, the examples include the names of individuals, companies, brands, and
products. All of these names are fictitious and any similarity to the names and addresses used by an
actual business enterprise is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrate programming
techniques on various operating platforms. You may copy, modify, and distribute these sample programs
in any form without payment to IBM, for the purposes of developing, using, marketing or distributing
application programs conforming to the application programming interface for the operating platform for
which the sample programs are written. These examples have not been thoroughly tested under all
conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these
programs. You may copy, modify, and distribute these sample programs in any form without payment to
IBM for the purposes of developing, using, marketing, or distributing application programs conforming
to IBM’s application programming interfaces.
Each copy or any portion of these sample programs or any derivative work, must include a copyright
notice as follows:
(C) IBM 2006. Portions of this code are derived from IBM Corp. Sample Programs. (C) Copyright IBM
Corp. 1998, 2006. All rights reserved.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
The following terms are trademarks of International Business Machines Corporation in the United States,
other countries, or both:
Advanced Function Printing
AFP
AS/400
CICS
COBOL/400
C/400
DataPropagator
DB2
40 IBM Systems - iSeries: AFP Utilities for iSeries Commands
IBM
Infoprint
InfoWindow
iSeries
LPDA
OfficeVision
i5/OS
Print Services Facility
RPG/400
SystemView
System/36
TCS
WebSphere
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the
United States, other countries, or both.
Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other
countries, or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
Terms and conditions
Permissions for the use of these publications is granted subject to the following terms and conditions.
Personal Use: You may reproduce these publications for your personal, noncommercial use provided that
all proprietary notices are preserved. You may not distribute, display or make derivative works of these
publications, or any portion thereof, without the express consent of IBM.
Commercial Use: You may reproduce, distribute and display these publications solely within your
enterprise provided that all proprietary notices are preserved. You may not make derivative works of
these publications, or reproduce, distribute or display these publications or any portion thereof outside
your enterprise, without the express consent of IBM.
Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either
express or implied, to the publications or any information, data, software or other intellectual property
contained therein.
IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of
the publications is detrimental to its interest or, as determined by IBM, the above instructions are not
being properly followed.
You may not download, export or re-export this information except in full compliance with all applicable
laws and regulations, including all United States export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE
PUBLICATIONS ARE PROVIDED ″AS-IS″ AND WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Appendix. Notices 41
42 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Printed in USA
AF1.html 2018-11-27 18:31 45K
![[TXT]](http://audentia-gestion.fr/__ovh_icons/text.gif)
BR1.pdf.html 2018-11-27 18:31 45K
CM1.pdf.html 2018-11-27 18:31 45K
CR1.pdf.html 2018-11-27 18:31 45K
DB2AdminGettingStart..> 2018-11-27 18:31 45K
DB2Connect-db2c0f971..> 2018-11-27 18:31 45K
DB2Connect-db2c0f101..> 2018-11-27 18:31 45K
DFH.pdf.html 2018-11-27 18:31 45K
DG1.pdf.html 2018-11-27 18:31 45K
DP4.pdf.html 2018-11-27 18:31 45K
DS1.pdf.html 2018-11-27 18:31 45K
IP1.pdf.html 2018-11-27 18:31 45K
JS1.pdf.html 2018-11-27 18:31 45K
JV1.pdf.html 2018-11-27 18:31 45K
MG1.pdf.html 2018-11-27 18:31 45K
PT1.pdf.html 2018-11-27 18:31 45K
QU1.pdf.html 2018-11-27 18:31 45K
RD1.pdf.html 2018-11-27 18:31 45K
SM1.pdf.html 2018-11-27 18:31 45K
SS1-1.pdf.html 2018-11-27 18:31 45K
SS1-2.pdf.html 2018-11-27 18:31 45K
SS1-3.pdf.html 2018-11-27 18:31 45K
SS1-4.pdf.html 2018-11-27 18:31 45K
SS1-5.pdf.html 2018-11-27 18:31 45K
SS1-6.pdf.html 2018-11-27 18:31 45K
SS1-7.pdf.html 2018-11-27 18:31 45K
SS1-8.pdf.html 2018-11-27 18:31 45K
SS1-9.pdf.html 2018-11-27 18:31 45K
SS1-10.pdf.html 2018-11-27 18:31 45K
SS1-11.pdf.html 2018-11-27 18:31 45K
SS1-12.pdf.html 2018-11-27 18:31 45K
SS1-13.pdf.html 2018-11-27 18:31 45K
SS1-14.pdf.html 2018-11-27 18:31 32K
SS1-15.pdf.html 2018-11-27 18:31 32K
SS1-16.pdf.html 2018-11-27 18:31 32K
ST1.pdf.html 2018-11-27 18:31 45K
TC1.pdf.html 2018-11-27 18:31 45K
WDS.pdf.html 2018-11-27 18:31 45K
XH2.pdf.html 2018-11-27 18:31 45K
adjuster.pdf.html 2018-11-27 18:31 45K
admin.pdf.html 2018-11-27 18:31 45K
administration_22apr..> 2018-11-27 18:31 45K
aixcmds1_pdf.pdf.html 2018-11-27 18:31 45K
aixcmds2_pdf.pdf.html 2018-11-27 18:31 45K
aixcmds3_pdf.pdf.html 2018-11-27 18:31 69K
aixcmds4_pdf.pdf.html 2018-11-27 18:23 69K
aixcmds5_pdf.pdf.html 2018-11-27 18:23 69K
aixcmds6_pdf.pdf.html 2018-11-27 18:23 69K
aixfiles_pdf.pdf.html 2018-11-27 18:23 69K
aixnutanix_pdf.pdf.html 2018-11-27 18:23 69K
api.pdf.html 2018-11-27 18:23 69K
backup.pdf.html 2018-11-27 18:23 69K
baseadmndita_pdf.html 2018-11-27 18:23 69K
baseadmndita_pdf.pdf..> 2018-11-27 18:23 69K
basetrf1_pdf (1).pdf..> 2018-11-27 18:23 69K
basetrf1_pdf.pdf.html 2018-11-27 18:23 69K
basetrf2_pdf.pdf.html 2018-11-27 18:23 69K
clust.pdf.html 2018-11-27 18:23 69K
clusteraware_pdf.pdf..> 2018-11-27 18:23 69K
cms.pdf.html 2018-11-27 18:23 69K
comm.pdf.html 2018-11-27 18:23 69K
commadmndita_pdf.pdf..> 2018-11-27 18:23 69K
config.pdf.html 2018-11-27 18:23 69K
config_guide_28jun0...> 2018-11-27 18:23 69K
consolidation.pdf.html 2018-11-27 18:23 69K
crypt.pdf.html 2018-11-27 18:23 69K
data.pdf.html 2018-11-27 18:23 69K
db2aaf81.pdf.html 2018-11-27 18:23 69K
debug.pdf.html 2018-11-27 18:23 69K
dirserv1.pdf.html 2018-11-27 18:23 69K
dix252f.pdf.html 2018-11-27 18:23 69K
ds_ig.pdf.html 2018-11-27 18:23 69K
dsm.pdf.html 2018-11-27 18:23 69K
edit.pdf.html 2018-11-27 18:23 69K
g5445774.pdf.html 2018-11-27 18:23 69K
g5445775.pdf.html 2018-11-27 18:23 69K
g5445846.pdf.html 2018-11-27 18:23 69K
g5445853.pdf.html 2018-11-27 18:23 69K
g5
oa.pdf.html 2018-11-27 18:23 69K
obj.pdf.html 2018-11-27 18:23 69K
off.pdf.html 2018-11-27 18:23 69K
openglrf.pdf.html 2018-11-27 18:23 69K
optimize_pdf.pdf.html 2018-11-27 18:23 69K
oraclemigtk.pdf.html 2018-11-27 18:23 69K
pase.pdf.html 2018-11-27 18:23 69K
perfmg.pdf.html 2018-11-27 18:23 69K
pgm.pdf.html 2018-11-27 18:23 69K
pm.pdf.html 2018-11-27 18:23 69K
pol.pdf.html 2018-11-27 18:23 69K
prftools_pdf.pdf.html 2018-11-27 18:23 69K
prftungd_pdf.pdf.html 2018-11-27 18:23 69K
print.pdf.html 2018-11-27 18:23 69K
printrgd_pdf.pdf.html 2018-11-27 18:23 69K
program.pdf.html 2018-11-27 18:23 69K
pwincfg.pdf.html 2018-11-27 18:23 69K
rbae5.pdf.html 2018-11-27 18:23 69K
rbafo.pdf.html 2018-11-27 18:23 69K
rbafpmst.pdf.html 2018-11-27 18:23 69K
rbafy.pdf.html 2018-11-27 18:23 69K
rbafzmst.pdf.html 2018-11-27 18:23 69K
rbagsmst.pdf.html 2018-11-27 18:23 69K
rbal1.pdf.html 2018-11-27 18:23 69K
rbal3.pdf.html 2018-11-27 18:23 69K
rbam6.pdf.html 2018-11-27 18:23 69K
rdma_pdf.pdf.html 2018-11-27 18:23 69K
reg.pdf.html 2018-11-27 18:23 69K
rnbase619_pdf.pdf.html 2018-11-27 18:23 69K
rnbase715_pdf.pdf.html 2018-11-27 18:23 69K
rnbase722_pdf.pdf.html 2018-11-27 18:23 69K
rnbase723_pdf.pdf.html 2018-11-27 18:23 69K
rnexp723_pdf.pdf.html 2018-11-27 18:23 69K
rpc1.pdf.html 2018-11-27 18:23 69K
rzaax.pdf.html 2018-11-27 18:23 69K
rzab6.pdf.html 2018-11-27 18:23 69K
rzadp.pdf.html 2018-11-27 18:23 69K
rzaef.pdf.html 2018-11-27 18:23 69K
rzaf3.pdf.html 2018-11-27 18:23 69K
rzah4mst.pdf.html 2018-11-27 18:23 69K
rzaha.pdf.html 2018-11-27 18:23 69K
rzaku.pdf.html 2018-11-27 18:23 69K
rzakx.pdf.html 2018-11-27 18:23 69K
rzakz.pdf.html 2018-11-27 18:23 69K
rzal2.pdf.html 2018-11-27 18:23 69K
rzal4.pdf.html 2018-11-27 18:23 69K
rzal5.pdf.html 2018-11-27 18:23 69K
rzal6.pdf.html 2018-11-27 18:23 69K
rzal7.pdf.html 2018-11-27 18:23 69K
rzala.pdf.html 2018-11-27 18:23 69K
rzalc.pdf.html 2018-11-27 18:23 69K