Les cookies nous permettent de vous proposer nos services plus facilement. En utilisant nos services, vous nous donnez expressément votre accord pour exploiter ces cookies.En savoir plus OK
IBM Systems - iSeries Backup Recovery and Media Services for iSeries Commands Version 5 Release 4
IBM Systems - iSeries Backup Recovery and Media Services for iSeries Commands Version 5 Release 4
Revenir à l'accueil
Voir également :
Au format texte :
IBM Systems - iSeries
Backup Recovery and Media Services for iSeries
Commands
Version 5 Release 4
IBM Systems - iSeries
Backup Recovery and Media Services for iSeries
Commands
Version 5 Release 4
Note
Before using this information and the product it supports, be sure to read the information in
“Notices,” on page 477.
Second Edition (February 2006)
This edition applies to version 5, release 4, modification 0 of Backup Recovery and Media Services for iSeries
(product number 5722-BR1) and to all subsequent releases and modifications until otherwise indicated in new
editions. This version does not run on all reduced instruction set computer (RISC) models nor does it run on CICS
models.
© Copyright International Business Machines Corporation 1998, 2006. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Add Media to BRM (ADDMEDBRM) . . . 1
Add Media Information to BRM
(ADDMEDIBRM) . . . . . . . . . . . 13
Add Media Library Media to BRM
(ADDMLMBRM) . . . . . . . . . . . 23
Analyze Libraries using BRM
(ANZLIBBRM) . . . . . . . . . . . . 29
Change Link List (CHGLNKLBRM) . . . 33
Change Media using BRM
(CHGMEDBRM) . . . . . . . . . . . 37
Change Job Scheduler (CHGSCDBRM) 43
Check Expired Media for BRM
(CHKEXPBRM) . . . . . . . . . . . 47
Copy Media Info for BRM
(CPYMEDIBRM) . . . . . . . . . . . 51
Dump BRMS (DMPBRM) . . . . . . . 55
Display ASP Information (DSPASPBRM) 59
Display Backup Plan using BRM
(DSPBKUBRM) . . . . . . . . . . . 61
Display Duplicate Media (DSPDUPBRM) 63
Display Log for BRM (DSPLOGBRM) 65
Duplicate Media using BRM
(DUPMEDBRM) . . . . . . . . . . . 71
Extract Media Information
(EXTMEDIBRM) . . . . . . . . . . . 85
Initialize BRMS (INZBRM). . . . . . . 89
Initialize Media using BRM
(INZMEDBRM). . . . . . . . . . . . 99
Migrate using BRM (MGRBRM) . . . . 103
Monitor Save While Active
(MONSWABRM) . . . . . . . . . . 107
Move Media using BRM
(MOVMEDBRM) . . . . . . . . . . 111
Move Spooled Files using BRM
(MOVSPLFBRM) . . . . . . . . . . 117
Print Labels using BRM
(PRTLBLBRM) . . . . . . . . . . . 125
Print Media Exceptions for BRM
(PRTMEDBRM). . . . . . . . . . . 127
Print Media Movement (PRTMOVBRM) 129
Remove Log Entries from BRM
(RMVLOGEBRM) . . . . . . . . . . 133
Remove Media Volumes from BRM
(RMVMEDBRM) . . . . . . . . . . 137
Remove Media Info from BRM
(RMVMEDIBRM) . . . . . . . . . . 139
Resume Retrieve using BRM
(RSMRTVBRM). . . . . . . . . . . 141
Restore Authority using BRM
(RSTAUTBRM) . . . . . . . . . . . 149
Restore Object using BRM (RSTBRM) 151
Restore DLO using BRM
(RSTDLOBRM) . . . . . . . . . . . 159
Restore Library using BRM
(RSTLIBBRM) . . . . . . . . . . . 165
Restore Object using BRM
(RSTOBJBRM) . . . . . . . . . . . 175
Save Object using BRM (SAVBRM) 185
Save DLO using BRM (SAVDLOBRM) 205
© Copyright IBM Corp. 1998, 2006 iii
Save Folder List using BRM
(SAVFLRLBRM) . . . . . . . . . . 223
Save Library using BRM
(SAVLIBBRM) . . . . . . . . . . . 237
Save Media Info using BRM
(SAVMEDIBRM) . . . . . . . . . . 261
Save Object using BRM
(SAVOBJBRM) . . . . . . . . . . . 273
Save Object List using BRM
(SAVOBJLBRM) . . . . . . . . . . 295
Save Save Files using BRM
(SAVSAVFBRM) . . . . . . . . . . 317
Save System using BRM
(SAVSYSBRM) . . . . . . . . . . . 325
Set Media Controls using BRM
(SETMEDBRM) . . . . . . . . . . . 335
Set Retrieve Controls for BRM
(SETRTVBRM) . . . . . . . . . . . 341
Set User Usage for BRM
(SETUSRBRM) . . . . . . . . . . . 351
Start Archive using BRM
(STRARCBRM) . . . . . . . . . . . 353
Start Backup using BRM
(STRBKUBRM) . . . . . . . . . . . 357
Start Expiration for BRM
(STREXPBRM) . . . . . . . . . . . 365
Start Migration using BRM
(STRMGRBRM). . . . . . . . . . . 369
Start Maintenance for BRM
(STRMNTBRM) . . . . . . . . . . . 375
Start Recovery using BRM
(STRRCYBRM) . . . . . . . . . . . 385
Start Subsystems using BRM
(STRSBSBRM) . . . . . . . . . . . 399
Verify Moves using BRM
(VFYMOVBRM). . . . . . . . . . . 401
Work with ASP Descriptions
(WRKASPBRM) . . . . . . . . . . 403
Work with Calendars using BRM
(WRKCALBRM) . . . . . . . . . . 407
Work with Classes using BRM
(WRKCLSBRM) . . . . . . . . . . 409
Work with Containers using BRM
(WRKCNRBRM) . . . . . . . . . . 411
Work with Control Groups
(WRKCTLGBRM) . . . . . . . . . . 415
Work with Devices using BRM
(WRKDEVBRM) . . . . . . . . . . 417
Work with Saved Folders
(WRKFLRBRM). . . . . . . . . . . 419
Work with Lists using BRM
(WRKLBRM) . . . . . . . . . . . . 423
Work with Link Information
(WRKLNKBRM) . . . . . . . . . . 425
Work with Locations using BRM
(WRKLOCBRM) . . . . . . . . . . 429
Work with Media using BRM
(WRKMEDBRM) . . . . . . . . . . 431
Work with Media Information
(WRKMEDIBRM) . . . . . . . . . . 439
Work with Migration Info
(WRKMGRIBRM) . . . . . . . . . . 447
Work with Media Libraries
(WRKMLBBRM) . . . . . . . . . . 453
Work with Media Library Media
(WRKMLMBRM) . . . . . . . . . . 455
Work with Saved Objects
(WRKOBJBRM) . . . . . . . . . . 459
Work with Policies using BRM
(WRKPCYBRM) . . . . . . . . . . 465
Work with Recovery Activities
(WRKRCYBRM) . . . . . . . . . . 467
iv IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Save Files (WRKSAVFBRM) 469
Work with Saved Spooled Files
(WRKSPLFBRM) . . . . . . . . . . 471
Appendix. Notices . . . . . . . . . 477
Contents v
vi IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Add Media to BRM (ADDMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Add Media to BRM (ADDMEDBRM) command adds a media volume to the BRMS media inventory.
The volume can be a volume from another media inventory that contains active data, the volume can be
a volume from some other outside source, or a new volume that you want to initialize. Once added,
BRMS tracks the volume’s characteristics, location, use and content.
When you add the volume, you must specify the media class of the volume. You can also specify how
you want the volume to move, where the volume is located, its container (if any) and other miscellaneous
attributes.
If the numbering scheme of the volumes that you are adding is consecutive, the ADDMEDBRM
command will automatically add the volumes without having to add the volumes one at a time.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. i5/OS uses certain volume identifiers for special purposes. You should avoid using these volume
identifiers in your volume labeling. Volume identifiers that you should avoid are:
TAPxxx
NLTxxx
BLKxxx
CLNxxx
ERRxxx
SLTxxx
IMPxxx
2. To add a virtual volume, you must specify the name of an existing tape image catalog on the Image
catalog (IMGCLG) parameter, These additional restrictions apply when adding virtual media:
v The name specified for the Volume identifier (VOL) parameter must exist as a tape volume name
in the image catalog entries.
v The density of the virtual volume (image catalog entry) must be the same as the density of the
media class.
v You must specify 1 for Number to add (VOLCNT). Virtual volumes can only be added
individually.
© Copyright IBM Corp. 1998, 2006 1
v You must specify *LCL or the current system name for System (SYSNAME). Virtual tape media
resides in storage on the current system.
v Cleaning and volume statistic are not maintained for virtual tape media.
Top
Parameters
Keyword Description Choices Notes
VOL Volume identifier Character value Required,
Positional 1
MEDCLS Media class Name Required,
Positional 2
VOLCNT Number to add 1-999, 1 Optional
INZ Initialize tape *NO, *YES Optional
EXPDATE Expiration date Character value, *NONE, *PERM Optional
MOVDATE Last moved date Character value, *NONE Optional
MOVPCY Move policy Name, *NONE Optional
CRTDATE Creation date Date, *CURRENT Optional
SLOT Slot number 1-999999, *NEXT, *NONE Optional
SYSNAME System Name, *LCL Optional
TEXT Text Character value, *NONE Optional
IMGCLG Image catalog Name, *NONE Optional
DEV Device Name Optional
NEWOWNID New owner identifier Character value, *BLANK Optional
CHECK Check for active files *YES, *FIRST, *NO Optional
CODE Code *EBCDIC, *ASCII Optional
ENDOPT End of tape option *REWIND, *UNLOAD Optional
CLEAR Clear *NO, *YES Optional
NXTVOLMSG Next volume message *YES, *NO Optional
DLY Tape mount delay 1-900, *DEV, *IMMED Optional
LOC Location Name, *HOME Optional
CNR Container ID Name, *NONE Optional
USECNT Media uses Decimal number, 0 Optional
READERR Read errors Decimal number, 0 Optional
WRTERR Write errors Decimal number, 0 Optional
BYTEREAD Bytes read Decimal number, 0 Optional
BYTEWRT Bytes written Decimal number, 0 Optional
CURBYTES Current bytes written Decimal number, 0 Optional
MAXBYTES Maximum bytes written Decimal number, 0 Optional
LASTCLN Last clean date Date, *NONE Optional
USECLN Uses since cleaning Decimal number, 0 Optional
Top
2 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Volume identifier (VOL)
Specifies the identifier of the volume being added to the BRMS media inventory. If the volume is being
added to a media class using a virtual density, the volume-identifier must match the Tape volume
nameof the image catalog entry.
This is a required parameter.
volume-identifier
Specify the identifier of the volume being added to the media inventory. The volume identifier is
a maximum of six characters in length. A volume cannot be added if its volume identifier already
exists in the BRMS media inventory.
Note: Valid characters for the volume identifier are 0 - 9 and A - Z.
Top
Media class (MEDCLS)
Specifies the user-defined name of a media class for the volume you are adding. Media classes can be
reviewed in the Work with Media Classes display.
This is a required parameter.
Top
Number to add (VOLCNT)
Specifies the number of volumes to add during this session. The value specified in the Volume identifier
(VOL) parameter is increased by 1 for each volume added until the end of the count is reached. If the
new volume identifier cannot be increased because of the way a volume is named, such as TAPEB9, an
error message is sent.
Note: You can add a maximum of 999 volumes at a time, even though the field can hold up to 5 digits.
1 Adds a single volume.
number-to-add
Specify the number of volumes to add. For instance, specifying a ″5″ would add 5 volumes, each
volume being increased by 1, such as T00001, T00002, T00003 and so on. The first volume (T00001
in the above example) is the volume specified in the Volume identifier (VOL) parameter. The
maximum number of volumes that you can add at a time is 999.
Top
Initialize tape (INZ)
Specifies whether the volumes that you are adding are to be initialized.
*NO The volume that you are adding is not to be initialized. This is used if the volume has been
initialized outside of BRMS and contains active data. You can specify the expiration date for this
volume in the Expiration date (EXPDATE) parameter.
*YES The volume is to be initialized with the ADDMEDBRM command and is to be added to the
BRMS media inventory. The date in the Expiration date (EXPDATE) parameter is set to *NONE
(all zeros).
Add Media to BRM (ADDMEDBRM) 3
If you specify *YES for the Initialize tape (INZ) parameter, you must specify the Device (DEV)
parameter. You must specify a device of category *VRTTAP if the media class uses a virtual
density (*VRT32K *VRT64K *VRT240K *VRT256K).
Top
Expiration date (EXPDATE)
Specifies the expiration date of the media volume that is added to the media inventory. If a date is
specified, the file is protected and cannot be overwritten until the expiration date.
*NONE
The media is expired media and can be used in backup or archive processing. A value of *NONE
means that the volume is a new volume that has been added to the media inventory or that the
volume has been reinitialized.
*PERM
The media has a permanent retention and cannot be used in backup or archive processing.
expiration-date
Specify the date when protection for the media ends.
Top
Last moved date (MOVDATE)
Specifies the last date this volume was moved prior to being added to the media inventory.
*NONE
You are not assigning a last moved date for this volume.
move-date
Specify the date that this volume was last moved.
Top
Move policy (MOVPCY)
Specifies the user-defined name of a move policy that you want to use for this volume.
Note: Virtual media cannot be moved. Move policies are assigned to virtual volumes so the policy can be
replicated to the output media when the virtual volume is duplicated.
*NONE
You are not assigning this volume a move policy.
move-policy-name
Specify the user-defined name of the move policy that you are assigning to this media volume.
Top
Creation date (CRTDATE)
Specifies the date that the first file on this volume was written.
*CURRENT
You are assigning the current date as the creation date for this volume.
4 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
creation-date
Specify the date that this volume had data written on it. The date must be specified in job date
format.
Top
Slot number (SLOT)
Specifies the slot number for the volume that you have selected to add.
*NEXT
Use the next available slot number if the specified location allows media slotting.
*NONE
No slot is assigned to the volume that you are adding.
slot-number
Specify the slot number that you are assigning to this volume. Slot numbers can be any number
from 1 to 999999.
Top
System (SYSNAME)
Specifies the system identifier for the volume that you are adding.
*LCL Specifies that the system is the local system. BRMS uses the default local location name,
LCLLOCNAME and not the system name SYSNAME. In most cases, the systems have the same
value specified in the LCLLOCNAME and in the SYSNAME. You can use the DSPNETA
command to view the system network attributes.
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to use this value.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to use this value.
Top
Text (TEXT)
Specifies text to describe the media that you are adding.
*NONE
There is no text associated with the volume that you are adding.
text Specify the text for the volume that you are adding.
Top
Add Media to BRM (ADDMEDBRM) 5
Image catalog (IMGCLG)
Specifies the name of the image catalog for a tape volume being added which is a virtual volume. The
image catalog and image catalog entry for the volume being added must exist before you can add and
initialize the virtual volumes.
Note: Use GO CMDCLG and GO CMDCLGE to view the menus for commands used to manage image
catalogs and image catalog entries.
*NONE
Specifies this is not a virtual volume.
image-catalog
Specifies the name of the image catalog which contains the image catalog entry for a virtual
volume.
Top
Device (DEV)
Specifies the name of the tape device which is used to initialize the volume. The tape device you specify
must be one whose category is *TAP or *TAPMLB as shown on the WRKDEVBRM display. This is a
required parameter when *YES is specified in the Initialize tape (INZ) parameter. You must specify a
device of category *VRTTAP if the media class uses a virtual density (*VRT32K *VRT64K *VRT240K
*VRT256K).
Top
New owner identifier (NEWOWNID)
Specifies the volume owner’s identifier to write in the volume label of the volume being written.
*BLANK
The owner identification field is set to blanks.
new-owner-identifier
Specify no more than 14 characters to identify the owner of the volume. If fewer than 14
characters are specified, the field is left-justified and is filled with blanks on the right.
Top
Check for active files (CHECK)
Specifies whether a labeled volume should be checked for active data files before it is initialized for use.
If an unlabeled volume is placed in the specified device, this parameter is ignored.
*YES All data file labels on the volume are checked. If any active files are found, the operation is
ended and an error message is sent.
*FIRST
Only the first data file label on the volume is checked. If there are no data files on the volume or
if the first data file has expired, the volume is initialized for use without checking for any other
files on the volume. If the first data file has not expired, the operation is ended and an error
message is sent.
*NO Volume initialization continues with no checking for active files. To initialize a new or empty
volume, *NO must be specified and *MOUNTED must be specified on the Volume identifier
(VOL) parameter.
6 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Code (CODE)
Specifies the character code in which the volume label is written. All data that is not save/restore data
written after the label must be in the same code; codes cannot be intermixed on a volume that is not a
save/restore volume.
*EBCDIC
The volume label is written in EBCDIC and is an IBM standard label; all additional data must
also be written in EBCDIC.
*ASCII
The volume label is written in ASCII and is an American National Standard Institute standard
label; all additional data must also be written in ASCII.
Top
End of tape option (ENDOPT)
Specifies whether the volume is only rewound, or rewound and unloaded after it has been initialized for
use.
*REWIND
The volume is rewound after it has been initialized for use.
*UNLOAD
The volume is rewound and unloaded.
Top
Clear (CLEAR)
Specifies whether all labels and data are to be deleted from the volume when it is initialized for use. If
the volume must be cleared of all data, it is deleted from the location of the volume label or volume
marks to the end of the volume marker.
*NO Existing data is not deleted. Even though the existing data is not deleted, the data on the volume
is not usable after the volume has been initialized for use.
*YES After the beginning of the volume has been initialized for use, the remaining data on the volume
is deleted.
Top
Next volume message (NXTVOLMSG)
Specifies whether you want BRMS to notify you through messages to place another volume on a device.
*YES BRMS will send you messages when the device is ready to accept another volume.
*NO You do not want BRMS to send you messages as soon as the device is ready to accept another
volume.
Top
Add Media to BRM (ADDMEDBRM) 7
Tape mount delay (DLY)
Specifies how long you want the device to delay before it begins processing the next volume on a device.
*DEV The device should begin processing the next volume based on the device default.
*IMMED
The device should begin processing the next volume as soon as it finishes the previous volume.
number-of-seconds
Specify the number of seconds that the device should wait before is begins processing the next
volume. The number of seconds can range from 1 to 900.
Top
Storage location (LOC)
Specifies the name of the storage location for the volume you are adding. Storage locations are used to
hold media and containers. Storage locations can be local, that is, your computer room, or volume
inventory or offsite, like a vault or vaulting service. Storage location names are user-defined.
Storage locations are set up in the Work with Storage Locations display. The choices on the command
reflect the locations that you have set up.
*HOME
The volume is assigned to a location called *HOME.
location-name
Specify the name of the storage location for this volume.
Top
Container ID (CNR)
Specifies the name of a container to which you want to add this volume. The container must be of a class
that can accommodate this type of media.
*NONE
You are not storing this volume in a container.
container-ID-name
Specify the name of the container in which you are storing this volume.
Top
Media uses (USECNT)
Specifies the number of times that a media volume has been read from or written to. When the volume
exceeds the usage threshold value for media in its media class, it should be taken out of service and
replaced with a newer volume. The usage threshold value can be reviewed in the Work with Media
Classes display. Media uses is expressed in number of uses.
0 Initializes the media uses as zero.
media-uses
Specify a number of media uses.
Top
8 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Read errors (READERR)
Specifies the number of read errors that have been recorded for each media volume in the media
inventory. When the number of read errors exceeds the value specified in the read error threshold for a
volume’s media class, the volume should be replaced with a new volume. The read error threshold value
can be reviewed in the Work with Media Classes display. Read errors are expressed in kilobytes per read
error.
The following guidelines can be used to determine the Read error threshold value for your media class.
If a volume or cartridge exceeds the criteria, copy the contents to a new volume and discard the old
volume.
3570 One temporary read error per 1000 megabytes read.
3580 One temporary read error per 10 gigabytes read.
3590 One temporary read error per 10 gigabytes read.
3480 and 3490
One temporary read error per 50,000,000 KB read.
1/4-Inch cartridge (6341, 6346, 6366 and 9346 and 6342 and 6347 at 10,000 bpi density)
One temporary read error per 12,500 KB read.
1/4-Inch Cartridge (6342 and 6347 at 16,000 bpi density)
One temporary read error per 4,170 read.
8-Millimeter cartridges (7208)
One temporary read error per 100 KB read.
1/2-inch volume reel (9347)
One temporary read error per 50,000 KB read.
1/2-inch tape reel (9348 and 2440)
One temporary read error per 100,000 KB read.
1/2-inch tape reel (3422)
One temporary read error per 144,000 KB read.
If all volumes used in a single drive exceed these criteria, the read/write heads are probably
dirty. You should also discard tape reels and tape cartridges with a hard read error.
0 Initializes the read errors as zero.
read-errors
Specify a number of read errors.
Top
Write errors (WRTERR)
Specifies the number of write errors that have been recorded for each media volume in the media
inventory. When the number of write errors exceeds the value specified in the write error threshold for a
volume’s media class, the volume should be replaced with a new volume. The write error threshold
value can be reviewed in the Work with Media Classes display. Write errors are expressed in kilobytes
per write error.
The following guidelines can be used to determine the Write error threshold value for your media class.
If a volume or cartridge exceeds the criteria, copy the contents to a new volume and discard the old
volume.
3570 One temporary write error per 250 GB written.
Add Media to BRM (ADDMEDBRM) 9
3580 One temporary write error per 10 GB written.
3590 One temporary write error per 1 GB written.
3480 and 3490
One temporary write error per 12,500 KB written.
1/4-Inch Cartridge (6341, 6346, 6366 and 9346 and 6342 and 6347 at 10,000 bpi density)
One temporary write error per 1,250 KB written.
1/4-Inch Cartridge (6342 and 6347 at 16,000 bpi density)
One temporary write error per 890 KB written.
8-Millimeter cartridges (7208)
One temporary write error per 50 KB written.
1/2-inch tape reel (9347)
One temporary write error per 4,500 KB written.
1/2-inch tape reel (9348 and 2440)
One temporary write error per 5,000 KB written for 1600 bpi. One temporary write error per 8,500
KB written for 6250 bpi.
1/2-inch tape reel (3422)
One temporary write error per 8,500 KB written.
If all tapes used in a single drive exceed these criteria, the read/write heads are probably dirty.
You should also discard volumes and tape cartridges with a hard write error.
0 Initializes the write errors as zero.
write-errors
Specify a number of write errors.
Top
Millions of bytes read (BYTEREAD)
Specifies the number of bytes read (in millions of bytes) from the volume since its creation date.
0 Initializes the bytes read as zero.
bytes-read
Specify a number of bytes read (in millions of bytes).
Top
Millions of bytes written (BYTEWRT)
Specifies the number of bytes written (in millions of bytes) to the volume since its creation date.
0 Initializes the bytes written as zero.
bytes-written
Specify a number of bytes written (in millions of bytes).
Top
Current millions of bytes written (CURBYTES)
Specifies the number of bytes currently written (in millions of bytes) on the media volume.
10 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
0 Initializes the current bytes written as zero.
current-bytes-written
Specify a number of current bytes written (in millions of bytes).
Top
Maximum millions of bytes written (MAXBYTES)
Specifies the maximum number of bytes (in millions of bytes) that can be written to this volume.
0 Initializes the maximum bytes written as zero.
maximum-bytes-written
Specify a maximum number of bytes written (in millions of bytes).
Top
Last clean date (LASTCLN)
Specifies the last date that the media volume was cleaned.
*NONE
No date is specified for the last cleaning date.
last-cleaning-date
Specify the last date that the volume was cleaned.
Top
Uses since cleaning (USECLN)
Specifies the number of uses since the last cleaning. When this number equals or exceeds the uses before
cleaning parameter for this media class, the volume should be cleaned before using it further. The uses
before cleaning value can be reviewed in the Work with Media Classes display.
0 Initializes the uses since cleaning as zero.
uses-since-cleaning
Specify a number of uses since cleaning.
Top
Examples
Example 1: Adding a Volume to BRMS
ADDMEDBRM VOL(T00001) MEDCLS(QIC1000)
This command adds volumes to the BRMS media inventory. In this example, volume T00001 is assigned a
media class of QIC1000 and is added to the BRMS media inventory. The volume is not initialized and is
added as expired.
Example 2: Adding and Initializing a Volume to BRMS
ADDMEDBRM VOL(T00002) MEDCLS(QIC1000)
INZ(*YES) DEV(TAP01)
Add Media to BRM (ADDMEDBRM) 11
This command adds the volume T00002 to the BRMS media inventory with a media class of QIC1000.
The volume is initialized using device TAP01.
Example 3: Adding a Virtual Volume to BRMS
ADDMEDBRM VOL(VRT001) MEDCLS(VRT256K)
INZ(*YES) DEV(VRTTAP) IMGCLG(VRTIMGCLG)
This command adds the virtual volume VRT001 to the BRMS media inventory with a media class of
VRT256K. The volume is initialized using device VRTTAP. Image catalog VRTIMGCLG contains the
image catalog entry for VRT001.
Top
Error messages
*ESCAPE Messages
BRM1134
Device &1 not found.
BRM133E
Image catalog entry does not exist for virtual volume &2.
BRM133F
Image catalog does not exist for virtual volume &2.
BRM1713
Media class &2 not found.
BRM1717
Volume cannot be renamed &1.
BRM1762
Volume &1 was not initialized.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
12 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Add Media Information to BRM (ADDMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Add Media Information to BRM (ADDMEDIBRM) command adds file level detail to the BRMS
media inventory content volume information.
The files, and the volumes that contain them can be from another tape inventory or from some other
outside source.
The purpose of the command is to allow user applications or another volume management system to
insert data (volume file descriptions) into the BRMS media contents information so that the volumes and
their contents can be managed.
Multiple volumes will write a media information record for each volume with the volume sequence being
increased as the records are added.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You can only add media content information to an expired volume.
2. This command adds records to the BRMS media content information file based on the information
you supply, particularly in regard to file sequence, volume and so on. It is critical that you are careful
to apply the correct information and have a full understanding of the command before you use it.
3. The volume for which you are adding content information must exist in the media inventory and the
volume, file sequence and volume sequence must be unique in the BRMS media inventory contents
information.
4. You can specify only one virtual tape device for the Device (DEV) parameter.
Top
Parameters
Keyword Description Choices Notes
VOL Volume Values (up to 300 repetitions): Character value Required,
Positional 1
VOLSEQ Volume sequence 1-9999 Required,
Positional 2
SEQNBR Sequence number 1-16777215 Required,
Positional 3
LABEL File label Character value, *TYPE Optional,
Positional 4
TYPE Type *LIB, *ALLDLO, *LINK, *QHST, *SAVCFG, *SAVSECDTA,
*SAVSYS
Optional,
Positional 5
LIB Library Name Optional
LNKLIST Link list Name, *LINK Optional
© Copyright IBM Corp. 1998, 2006 13
Keyword Description Choices Notes
FILE File origin *FILE, *SAV, *SAVCFG, *SAVCHG, *SAVCHGOBJ,
*SAVCHGDLO, *SAVDLO, *SAVLIB, *SAVOBJ,
*SAVSECDTA, *SAVSYS
Optional
INCTYPE Incremental type *CUML, *INCR Optional
CRTDATE Entry date Date, *CURRENT Optional
CRTTIME Entry time Time, *CURRENT Optional
EXPDATE Expiration date Character value, *PERM Optional
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name
Optional
STRVOL Beginning volume Character value, *VOL Optional
ASP Auxiliary storage pool 1-255, *SYSTEM Optional
ASPDEV Auxiliary storage pool
device
Name, *NONE Optional
FLR Folder Character value, *ANY Optional
OBJSAV Objects saved 1-999999, 1 Optional
OBJNOTSAV Objects not saved 0-999999, 0 Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
RCDFMT Record format U, F, V, *NONE Optional
RCDLEN Record length 0-32760, 0 Optional
BLKLEN Block length 0-32760, 32760 Optional
BLKCNT Block count 0-999999, 1 Optional
TEXT Text Character value, *NONE Optional
Top
Volume (VOL)
Specifies the volume identifier or identifiers of the volume or volumes that contain the file that is being
added to the BRMS media inventory contents information. Volumes must be enrolled in the BRMS media
inventory. A maximum of 300 volumes can be specified here.
This is a required parameter.
volume-identifier
Specify the identifier of the volume that contains the file being added to the BRMS media
inventory contents information. The volume identifier is a maximum of six characters in length.
The volume must already exists in the BRMS media inventory.
Top
Volume sequence (VOLSEQ)
Specifies the sequence number of the volume that contains the file that you are adding to the BRMS
media inventory contents information. The volume sequence number is the sequence number of the
volume that contains the beginning of the file that you are adding. If you specify a volume sequence
other than 1 in the Volume sequence (VOLSEQ) parameter, you must specify the beginning volume of
the media set in the Beginning volume (STRVOL) parameter. If you specify a 1 in the Volume sequence
(VOLSEQ) parameter, the volume specified in the Volume (VOL) parameter must match the volume
specified in the Beginning volume (STRVOL) parameter or be *VOL.
This is a required parameter.
14 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Sequence number (SEQNBR)
Specifies the sequence number of the file that you are adding to the media inventory. The sequence
number is the file sequence of the file on the volume that you are adding.
This is a required parameter.
Top
File label (LABEL)
Specifies the label for the file that you are adding to the media content information.
*TYPE The label of the file is used.
label-identifier
Specify the label identifier for the file.
Top
Type (TYPE)
Specifies the special value associated with the file that you are adding to the BRMS media content
information.
*LIB The type of information that you are adding is library information. If you specify *LIB for the
Type (TYPE) parameter, you must specify a library name in the Library (LIB) parameter.
*ALLDLO
The type of information that you are adding is document library information.
*LINK
The type of information that you are adding is integrated file system object information.
*QHST
The type of information that you are adding is history information.
*SAVCFG
The type of information that you are adding is configuration information.
*SAVSECDTA
The type of information that you are adding is security information.
*SAVSYS
The type of information that you are adding is system save information.
Top
Library (LIBRARY)
Specifies the library name of the library whose content information you are adding to the BRMS media
content information. This parameter is required when *LIB is specified in the Type (TYPE) parameter.
Top
Add Media Information to BRM (ADDMEDIBRM) 15
Link list (LNKLIST)
Specifies the link list name to be associated with the integrated file system object information that you are
adding to the BRMS media content information.
*LINK
Specifies that the entry created is associated with the *LINK type save used in a control group.
list-name
Specifies the list name that the entry created is associated with.
Note: The list name that you specify is shown as the backup item name when working with
media information.
Top
File origin (FILE)
Specifies the operation that was used to create the file that you are adding to the media information file.
*FILE The file that you are adding was not created using a save operation.
*SAV The file that you are adding to the BRMS media inventory contents information was created
using a Save Object (SAV) command.
*SAVCFG
The file that you are adding to the BRMS media inventory contents information was created
using a Save Configuration ( SAVCFG) command.
*SAVCHG
The file that you are adding to the BRMS media inventory contents information was created
using a SAV command with a selected reference date and time.
*SAVCHGDLO
The file that you are adding to the BRMS media inventory contents information was created
using a SAVDLO command with a selected reference date and time.
*SAVCHGOBJ
The file that you are adding to the BRMS media inventory contents information was created
using a Save Changed Objects (SAVCHGOBJ) command.
*SAVDLO
The file that you are adding to the BRMS media inventory contents information was created
using a Save Document Library Object (SAVDLO) command.
*SAVLIB
The file that you are adding to the BRMS media inventory contents information was created
using a Save Library (SAVLIB) command.
*SAVOBJ
The file that you are adding to the BRMS media inventory contents information was created
using a Save Object (SAVOBJ) command.
*SAVSECDTA
The file that you are adding to the BRMS media inventory contents information was created
using a Save Security Data (SAVSECDTA) command.
*SAVSYS
The file that you are adding to the BRMS media inventory contents information was created
using a Save System (SAVSYS) command.
Top
16 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Incremental type (INCTYPE)
Specifies the type of incremental save for the content information that you are adding to the BRMS media
content information.
*CUML
Only save items that have changed. *CUML indicates that the incremental save includes all
objects that have been changed since the last full save.
*INCR
Only save changed items. *INCR indicates that the incremental save includes all objects that have
been changed since the last incremental save.
Top
Entry date (CRTDATE)
Specifies the date the file was created. Dates are entered in job date format with or without date
separators.
*CURRENT
The date the file was saved is the current date of the system.
entry-date
Specify the date that the file was saved.
Top
Entry time (CRTTIME)
Specifies the time that each file was created. Time is expressed in the hhmmss format where hh = hours,
mm = minutes, and ss = seconds.
*CURRENT
The time the file was saved is the current time of the system.
entry-time
Specify the time the file was saved.
Top
Expiration date (EXPDATE)
Specifies the expiration date of the file that is added to the media content information. If a date is
specified, the file is protected and cannot be overwritten until the expiration date has passed. Dates are
entered in job date format with or without date separators.
*PERM
The file has a permanent retention and cannot be used.
*VER nnn
Specify the number of versions that are kept in the BRMS media inventory contents information.
For instance, *VER 003 indicates that three versions of the save item are kept. When the fourth
version of the save item is created, the earliest version is removed and replaced by the fourth
version of the save.
Note: *VER 003 is not the version number. It is the number of versions as specified in the media
policy.
Add Media Information to BRM (ADDMEDIBRM) 17
expiration-date
Specify the date when protection for the file ends.
Top
Device (DEV)
Specifies the name of the device or devices which were used to create the file.
Single values
*NONE
No devices are to be associated with the file that you are adding to the BRMS media inventory
contents information.
Other values (up to 4 repetitions)
device-name
Specify the name of the device that you want to associate with the file that you are adding to the
BRMS media inventory contents information.
Top
Beginning volume (STRVOL)
Specifies the beginning volume of the media set that contains the file that you are adding to the media
information. For instance if you had a 3 volume media set, T00001, T00002 and T00003 and you were
adding the fourth file in the media set (which is on T00002), the value in the Volume (VOL) parameter
would be T00002, the value in the Sequence number (SEQNBR) parameter would be 4, the Volume
sequence (VOLSEQ) parameter would be 2 and the Beginning volume (STRVOL) parameter would be
T00001.
*VOL The first volume specified in the Volume list is the beginning volume. This can only be true
when the Volume sequence is equal to 1.
volume-identifier
Specify the volume identifier that is the beginning volume for the media set that contains the file
that you are adding to the BRMS media inventory contents information.
Top
Auxiliary storage pool (ASP)
Specifies the auxiliary storage pool number for the file that you are adding to the media content
information.
*SYSTEM
The content information you are adding was saved from the system (1) auxiliary storage pool.
auxiliary-storage-pool-number
The content information you are adding was saved from the auxiliary storage pool identified by
this number.
Note: The auxiliary storage pool number must be less than 33 if a value of *ALLDLO or *SAVCAL is
specified for the Type (TYPE) parameter.
Top
18 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Auxiliary storage pool device (ASPDEV)
Specifies the auxiliary storage pool device for the file that you are adding to the media content
information.
*NONE
The content information you are adding was saved from the system (1) or a basic user (2-32)
auxiliary storage pool. *NONE must be specified if the value for ASP is *SYSTEM or 1-32.
auxiliary-storage-pool-name
The content information you are adding was saved from the auxiliary storage pool device
identified by this name. An auxiliary storage pool device name must be specified if the value for
ASP is 33-255.
Top
Folder (FLR)
Specifies the name of the folder that is associated with the file that you are adding to the BRMS media
inventory contents information. The Folder (FLR) parameter is associated with values that are specified
in the Library (LIB) parameter and the File origin (FILE) parameter. If you specify *ALLDLO or QDOC
in the Library (LIB) parameter, the value *ANY is defaulted in the Folder (FLR) parameter. If you specify
SAVDLO or SAVCHGDLO on the File origin (FILE)parameter, you must specify either QDOC or
*ALLDLO on the Library (LIB) parameter. The Folder (FLR) parameter defaults to *ANY.
*ANY The file that you are adding to the media content information can contain any folder.
folder-name
Specify the name of the folder for the file that you are adding to the media content information.
Top
Objects saved (OBJSAV)
Specifies the number of objects saved for the file that you are adding to the media content information.
1 The number of saved objects is one.
number-of-objects-saved
Specify the number of objects saved.
Top
Objects not saved (OBJNOTSAV)
Specifies the number of objects that were not saved for the file that you are adding to the media content
information.
0 The number of objects not saved is zero.
number-of-objects-not-saved
Specify the number of objects that were not saved.
Top
Add Media Information to BRM (ADDMEDIBRM) 19
Control group (CTLGRP)
Specifies the control group with which you want to associate the file that you are adding to the media
content information.
*NONE
You do not want to associate the file that you are adding to the media content information with a
control group.
*ARCGRP
You want to associate the file that you are adding to the media content information with the
archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
You want to associate the file that you are adding to the media content information with the
backup user data control group.
*SYSGRP
You want to associate the file that you are adding to the media content information with the
system data control group.
*SYSTEM
You want to associate the file that you are adding to the media content information with the
backup entire system control group.
control-group-name
Specify a control group name that you have defined to associate with the file that you are adding.
Top
Record format (RCDFMT)
Specifies the record format for the file that you are adding to the media content information.
U The record format is undefined for the file that you are adding to the media content information.
F The record format is fixed length records for the file that you are adding to the media content
information.
V The record format is variable length records for the file that you are adding to the media content
information.
*NONE
There is no record format associated with the file that you are adding to the media content
information.
Top
Record length (RCDLEN)
Specifies the record length of the file.
v Fixed length records = Number of bytes in each record
v Variable length records = Maximum number of bytes in each record
v Undefined format = Zero
0 The record length is zero.
record-length
Specify the record length of the record in the file.
20 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Block length (BLKLEN)
Specifies the number of bytes in each block.
32760 The block length is 32760 bytes.
block-length
Specify the block length for this file.
Top
Block count (BLKCNT)
Specifies the number of blocks.
1 The block count is one.
block-count
Specify the block count for this file.
Top
Text (TEXT)
Specifies text information about the file that you are adding to the media content information.
*NONE
No text is specified for the media content.
text Specify the text that describes the media content.
Top
Examples
Example 1: Adding Contents to a Volume
ADDMEDIBRM TYPE(*ALLDLO) VOL(T00001)
SEQNBR(1) VOLSEQ(1)
This command adds an entry in the media inventory content information for volume T00001. The
volume’s contents are updated to show that a save of the document library resides as file sequence
number 1 on the first volume.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
Add Media Information to BRM (ADDMEDIBRM) 21
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
22 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Add Media Library Media to BRM (ADDMLMBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Add Media Library Media to BRM (ADDMLMBRM) command allows you to add volumes to a
media library (MLB). The command adds the specified media volumes to a usable category and
optionally enrolls them to BRMS. If the Add volume to BRM (ADDVOL) parameter is *YES, you can
specify a media class for the volume or volumes that you are adding. If the Add volume to BRM
(ADDVOL) parameter and the Initialize tape (INZ) parameter are both *YES, you are supplied with
additional parameters such as move policy and initialization information.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
MLB Media library Name Required,
Positional 1
VOL Volume identifier Single values: *INSERT
Other values (up to 300 repetitions): Character value
Optional,
Positional 2
ADDVOL Add volume to BRM *YES, *NO Optional
INZ Initialize tape *NO, *YES Optional
MEDCLS Media class Name Optional
MOVDATE Last moved date Character value, *NONE Optional
MOVPCY Move policy Name, *NONE Optional
EXPDATE Expiration date Character value, *NONE, *PERM Optional
DEV Device Name, *MLB Optional
NEWOWNID New owner identifier Character value, *BLANK Optional
CHECK Check for active files *YES, *FIRST, *NO Optional
CODE Code *EBCDIC, *ASCII Optional
CLEAR Clear *NO, *YES Optional
Top
Media library (MLB)
Specifies the name of the media library to which you are adding media. The MLB must be one that
BRMS lists on its Work with Media Libraries display.
Top
© Copyright IBM Corp. 1998, 2006 23
Volume identifier (VOL)
Specifies the volume identifier of the media being added to the BRMS media inventory.
This is a required parameter.
Single values
*INSERT
Volume identifiers that are in the insert category in the MLB are to be changed to a usable
category within the MLB based on the value specified in the Add volume to BRM (ADDVOL)
parameter. If the value specified in the Add volume to BRM (ADDVOL) parameter is *NO, only
volumes already enrolled in BRMS will be changed from the insert category to a usable category.
If the value specified in the Add volume to BRM (ADDVOL) parameter is *YES, volumes that
are currently enrolled in BRMS as well as those that are not currently enrolled in BRMS and are
in the insert category, will be added to BRMS and changed from the insert category to a usable
category.
Other values (up to 300 repetitions)
volume-identifier
Specify the identifier of the volume or volumes that you want to change from the insert category
to a usable category within the MLB.
Top
Add volume to BRM (ADDVOL)
Specifies whether you want to add the volumes specified in the Volume identifier (VOL) parameter to
the BRMS media inventory.
*YES You want to add the volumes specified to the BRMS media inventory. When you specify *YES,
you are asked to supply a media class in the Media class (MEDCLS) parameter.
*NO You do not want to add the volumes specified to the BRMS media inventory.
Top
Initialize tape (INZ)
Specifies whether you want to initialize the volumes specified in the Volume identifier (VOL) parameter.
This parameter is ignored if ADDVOL=*NO.
*NO You do not want to format the specified volumes.
*YES You want to format the specified volumes. When you specify *YES, you are asked to supply a
device and initialization information.
Top
Media class (MEDCLS)
Specifies the name of a media class for the volume you are adding. Media classes can be reviewed in the
Work with Media Classes display.
24 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
The media class is also used to determine the category for volumes that are being added to the media
library. If the Shared media attribute in the media class is *NO, the category is changed from *INSERT to
*NOSHARE, otherwise the category is changed to *SHARE400.
This is a required parameter if ADDVOL=*YES. This parameter is ignored if ADDVOL=*NO.
This is a required parameter if you are adding a volume.
Top
Last moved date (MOVDATE)
Specifies the date of the last time this media volume was moved prior to being added to the media
inventory.
This parameter is ignored if ADDVOL=*NO.
*NONE
You are not assigning a last moved date for this media volume.
move-date
Specify the date that this volume was last moved.
Top
Move policy (MOVPCY)
Specifies the user-defined name of a move policy that you want to use for this volume.
This parameter is ignored if ADDVOL=*NO.
*NONE
You are not assigning this volume a move policy.
move-policy-name
Specify the name of the move policy that is to control the movement of this volume.
Top
Expiration date (EXPDATE)
Specifies the expiration date of the volume that is added to the media inventory. If a date is specified, the
file is protected and cannot be overwritten until the expiration date.
This parameter is ignored if ADDVOL=*NO.
*NONE
The media is understood to contain no active data and can be used in backup or archive
processing. Use *NONE when the volume is a new volume or when the volume is a previously
used volume whose data is expired.
*PERM
The media has a permanent retention and cannot be used in backup or archive processing.
expiration-date
Specify the date after which data on the volume is considered to be non-essential and can be
overwritten. The date must be specified in job date format.
Add Media Library Media to BRM (ADDMLMBRM) 25
Top
Device (DEV)
Specifies the name of the device that you want to use to initialize the specified volumes. The location of
the device and the location of the MLB specified in the Media library (MLB) parameter must be the
same.
This parameter is ignored if ADDVOL=*NO.
*MLB Any device associated with the specified MLB can be used to initialize the specified volumes.
device-name
Specify the user-defined name of the device that you want to use to initialize the specified
volumes.
Top
New owner identifier (NEWOWNID)
Specifies the volume owner’s identifier to write in the volume label of the volume being written.
Note: This parameter is ignored if ADDVOL=*NO.
*BLANK
The owner identification field is set to blanks.
new-owner-identifier
Specify no more than 14 characters to identify the owner of the volume. If fewer than 14
characters are specified, the field is left-justified and is filled with blanks on the right.
Top
Check for active files (CHECK)
Specifies whether a labeled volume should be checked for active data files before it is initialized for use.
If an unlabeled volume is placed in the specified device, this parameter is ignored.
This parameter is ignored if ADDVOL=*NO.
*YES All data file labels on the volume are checked. If any active files are found, the operation is
ended and an error message is sent.
*FIRST
Only the first data file label on the volume is checked. If there are no data files on the volume or
if the first data file has expired, the volume is initialized for use without checking for any other
files on the volume. If the first data file has not expired, the operation is ended and an error
message is sent.
*NO Volume initialization continues with no checking for active files. To initialize a new or empty
volume *NO must be specified here and *MOUNTED must be specified on the Volume identifier
(VOL) parameter.
Top
26 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Code (CODE)
Specifies the character code in which the volume label is written. All data that is not save/restore data
written after the label must be in the same code; codes cannot be intermixed on a volume that is not a
save/restore volume.
This parameter is ignored if ADDVOL=*NO.
*EBCDIC
The volume label is written in EBCDIC and is an IBM standard label; all additional data must
also be written in EBCDIC.
*ASCII
The volume label is written in ASCII and is an American National Standard Institute standard
label; all additional data must also be written in ASCII.
Top
Clear (CLEAR)
Specifies whether all labels and data are to be deleted from the volume when it is initialized for use. If
the volume must be cleared of all data, it is deleted from the location of the volume label or tape marks
to the end of the tape marker.
This parameter is ignored if ADDVOL=*NO.
*NO Existing data is not deleted. Even though the existing data is not deleted, the data on the volume
is not usable after the volume has been initialized for use.
*YES After the beginning of the volume has been initialized for use, the remaining data on the volume
is deleted.
Top
Examples
Example 1: Adding a Volume to a Media Library
ADDMLMBRM MLB(MLB01) VOL(T00001)
INZ(*NO) ADDVOL(*NO)
This command adds volume T00001 to the media library MLB01, but the volume is not initialized.
Volume T00001 must be a member of the BRMS media inventory.
Example 2: Adding and Initializing a Volume to BRMS
ADDMLMBRM MLB(MLB01) VOL(*INSERT)
INZ(*YES) MEDCLS(CART3490E)
This command adds all volumes that are in the *INSERT category to the media library MLB01, and adds
the volumes to the BRMS media inventory as media of class CART3490E. The volumes are initialized
with the density specified in media class CART3490E.
Top
Error messages
*ESCAPE Messages
Add Media Library Media to BRM (ADDMLMBRM) 27
BRM1134
Device &1 not found.
BRM1342
Volume identifier &2 not correct.
BRM1707
Media library &1 not found or not defined.
BRM1763
Device &1 cannot be used.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
28 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Analyze Libraries using BRM (ANZLIBBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Analyze Libraries using BRM (ANZLIBBRM) command prints an analysis of libraries that you have
backed up as well as those that you did not back up. The size of the library and the number of objects is
listed for each library.
Before you can run the ANZLIBBRM command you must have first run the Retrieve Disk Information
(RTVDSKINF) command. The RTVDSKINF command creates the files required by ANZLIBBRM to
analyze your libraries.
You can run the RTVDSKINF command by using Option 1 = Retrieve disk space information from the
BRMS Backup Analysis panel (GO BRMBKUANL). If you have auxiliary storage pool devices on the
system, you will need to run the RTVDSKINF command multiple times, once for each auxiliary storage
pool device.
Note: The RTVDSKINF command requires you to be enrolled in system distribution directory. Use the
Work with Directory Entries (WRKDIRE) command to create a distribution directory entry.
You only need run the ANZLIBBRM command once after the RTVDSKINF jobs have completed. The
RTVDSKINF commands are submitted to the QBATCH job queue using a job name of RTVDSKINF.
Monitor for the completion of all RTVDSKINF jobs in the QBATCH subsystem before running the
ANZLIBBRM command.
The report produced by the ANZLIBRBM command is the Library Backup Analysis report. There will be
multiple reports if you run the RTVDSKINF command for auxiliary storage pool devices in addition to
the basic system report. The reports are written to printer file QP1ALA for the system and basic user
auxiliary storage pools, and to printer file QP1ALAnnnnn for auxiliary storage pool devices, where
nnnnn is the ASP identifier.
There are no parameters for this command.
The command uses the first device listed in the System Policy to determine the Transfer rate entry shown
on the report. The transfer rate defaults to the device transfer rate as reported by the operating system.
The transfer rate for a device can be changed using the Work with Devices using BRM (WRKDEVBRM)
command, selecting option 2=Change from the Work with Devices panel, and changing the value of the
Transfer rate per second prompt on the Change Tape Device display.
If BRMS cannot find the device specified in the System Policy, the transfer rate used in the report will be
zero, the estimated times on the report will also be zero, and the following message will be printed at the
bottom of the report.
Error: Device information entries do not exist or
default device not specified in the System Policy.
The command uses the Media Class listed in the System Policy to determine the Media capacity entry
shown on the report. The media capacity defaults to a fixed value established by BRMS for that Media
Class. The media capacity for a Media Class can be changed using the Work with Classes using BRM
(WRKCLSBRM) command, selecting option 2=Change from the Work with Media Classes panel, and
changing the value of the Media capacity prompt on the Change Media Class display.
© Copyright IBM Corp. 1998, 2006 29
If BRMS cannot find the Media Class specified in the System Policy, the Media capacity used in the
report will be zero, the estimated volumes will also be zero, and the following message will be printed on
the report.
Error: Default media class has not been established or
is not specified in the System Policy.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
None
Top
Examples
Example 1: Analyse the Base System
GO BRMBKUANL
1. Retrieve Disk Space Information
RTVDSKINF ASPDEV(*SYSBAS)
ANZLIBBRM
These commands retrieve the disk information for the system and basic user auxiliary storage pools.
Analysis of the retrieved data generates report QP1ALA.
Example 2: Analyse Auxiliary Storage Pool PRIMETIME
GO BRMBKUANL
1. Retrieve Disk Space Information
RTVDSKINF ASPDEV(PRIMETIME)
ANZLIBBRM
These commands retrieve the disk information for the auxiliary storage pool device which uses device
description PRIMETIME and is configured as auxiliary storage pool 35. Analysis of the retrieved data
generates report QP1ALA00035.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
30 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Analyze Libraries using BRM (ANZLIBBRM) 31
32 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Change Link List (CHGLNKLBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Change Link List (CHGLNKLBRM) allows you to change a list of object to be used in backup or
archive processing. You can include the fully qualified object name and whether you want to include or
exclude the object from the list.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The CHGLNKLBRM command uses the i5/OS Save Object (SAV) and Restore Object (RST) commands
to process the lists that you enter into the CHGLNKLBRM command. These restrictions can be
reviewed in the SAV and RST command help information.
2. You cannot save QDLS or QSYS.LIB using the Save Object using BRM (SAVBRM) command.
Top
Parameters
Keyword Description Choices Notes
LIST List Character value Optional,
Positional 1
TYPE Usage type *BKU, *ARC Optional
OBJ Objects Values (up to 300 repetitions): Element list Optional
Element 1: Name Path name
Element 2: Include or omit *INCLUDE, *OMIT
SUBTREE Directory subtree *ALL, *DIR, *NONE, *OBJ Optional
TEXT Text Character value Optional
Top
List (LIST)
The name of the list being changed to contain integrated file system objects. The list must be an existing
BRMS link list.
This is a required parameter.
Top
Usage type (TYPE)
Specifies the intended usage type of the items that you are grouping together for processing.
*BKU The list is used in backup processing.
© Copyright IBM Corp. 1998, 2006 33
*ARC The list is used in archive processing.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
Top
Objects (OBJ)
Specifies the objects that you want to include or exclude from a list of objects you want to save. A
maximum of 300 object name patterns can be specified.
This is a required parameter.
Element 1: Name
’*’ The objects in the current directory are saved.
’object-path-name-pattern’
Specify an object path name or a pattern that can match many names.
Restriction:
v You cannot list QDLS or QSYS.LIB objects in a link list. Use the appropriate *OBJ or *FLR list
for objects in these file systems. To create lists of objects in these file systems, use the Work
with Lists using BRMS (WRKLBRM) command.
Element 2: Include or omit
The second part specifies whether names that match the pattern should be included or omitted from the
operation. Note that in determining whether a name matches a pattern, relative name patterns are always
treated as relative to the current working directory. The Directory subtree (SUBTREE) parameter
determines whether the subtrees are included or omitted.
*INCLUDE
Objects that match the object name pattern are to be saved, unless overridden by an *OMIT
specification.
*OMIT
Objects matching the object name pattern are not to be saved. This overrides a *INCLUDE
specification and is intended to be used to omit a subset of a previously selected pattern.
Top
Directory subtree (SUBTREE)
Specifies whether directory subtrees should be processed.
*ALL The entire subtree for each directory that matches the object name pattern will be processed.
*DIR Objects in the first level of each directory that matches the object name pattern will be processed.
*NONE
No subtrees are included in the save operation. If a directory matches the object name pattern
specified, the objects in the directory are included. If the directory has subdirectories, neither the
subdirectories nor the objects in the subdirectories are included.
*OBJ Only the objects that exactly match the object name pattern will be processed. If the object name
pattern specifies a directory, objects in the directory are not included.
Top
34 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Text (TEXT)
Specifies the text that describes the integrated file system object list.
text Specify the text that describes the integrated file system object list.
Top
Examples
Example 1: Changing a Link List
CHGLNKLBRM LIST(MYLIST) USE(*BKU)
OBJ((’/*’ *INCLUDE) (’/QSYS.LIB/’ *OMIT)
(’/QDLS/’ *OMIT) (’/NOTES/DATA/’ *OMIT))
In this example a list of integrated file system objects includes the entire system except the QSYS.LIB and
QDLS file systems, and the /NOTES/DATA directories.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Change Link List (CHGLNKLBRM) 35
36 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Change Media using BRM (CHGMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Change Media using BRM (CHGMEDBRM) command changes an attribute or several attributes of a
media volume in the BRMS media inventory.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. Consideration should be given to changing the authority to the CHGMEDBRM command from
PUBLIC(*CHANGE) to a more restrictive authority to assure that changes are not made to media
without proper authorization.
2. These following restrictions apply for changing virtual tape volumes.
v The density of the virtual volume (image catalog entry) must be the same as the density of the
media class.
v Virtual tape media must reside in storage on the current system.
Top
Parameters
Keyword Description Choices Notes
VOL Volume identifier Character value Required, Key,
Positional 1
MEDCLS Media class Name, *SAME Optional
EXPDATE Expiration date Character value, *SAME, *NONE, *PERM Optional
MOVDATE Last moved date Date, *SAME, *NONE Optional
MOVPCY Move policy Name, *SAME, *NONE Optional
CRTDATE Creation date Date, *SAME Optional
VOLSEC Secure volume *SAME, *NO, *YES Optional
SLOT Slot number 1-999999, *SAME, *NONE Optional
SYSNAME System Name, *SAME, *LCL Optional
TEXT Text Character value, *SAME, *NONE Optional
IMGCLG Image catalog Name, *SAME, *NONE Optional
Top
Volume identifier (VOL)
Specifies the volume identifier of the volume being changed in the BRMS media inventory.
This is a required parameter.
© Copyright IBM Corp. 1998, 2006 37
volume-identifier
Specify the identifier of the volume being changed in the media inventory. The volume identifier
is a maximum of six characters in length.
Note: Valid characters for the volume identifier are 0 - 9 and A - Z.
Top
Media class (MEDCLS)
Specifies the user-defined name of a media class for the volume you are changing. Media classes can be
reviewed in the Work with Media Classes display.
*SAME
Use the same value as is currently assigned to the parameter.
media-class
Specify the media class to which you want to change.
Top
Expiration date (EXPDATE)
Specifies the expiration date of the media volume that is changed in the media inventory. If a date is
specified, the file is protected and cannot be overwritten until the expiration date.
Changing the expiration date of a volume will change the expiration date for all entries that contain data
on that volume. If the data for an entry spans multiple volumes, the expiration date for those volumes
may also change. The other volumes expiration dates will change only if the changed date is further in
the future or the changed entry is the only entry having data on that volume.
*SAME
The expiration date currently assigned to the media is not changed.
*NONE
The media is expired media and can be used in backup or archive processing.
*PERM
The media has a permanent retention and cannot be used in backup or archive processing.
expiration-date
Specify the date when protection for the media ends.
Top
Last moved date (MOVDATE)
Specifies the last date that this media volume was moved.
*SAME
You are not going to change the last moved date currently assigned to the volume.
*NONE
You are not assigning a last moved date for this media volume.
last-moved-date
Specify the date that this volume was last moved.
Top
38 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Move policy (MOVPCY)
The user-defined name of a move policy that you want change for this volume.
Note: Virtual media cannot be moved. Move policies are assigned to virtual volumes so the policy can be
replicated to the output media when the virtual volume is duplicated.
*SAME
You want to use the same move policy as is currently assigned to the volume.
*NONE
You are not assigning this volume a move policy.
move-policy-name
Specify the user-defined name of the move policy that you are assigning to this media volume.
Top
Creation date (CRTDATE)
Specifies the date that this volume had data written on it.
*SAME
You are not going to change the creation date currently assigned to the volume.
creation-date
Specify the date that this volume had data written on it.
Top
Secure volume (VOLSEC)
Specifies whether you want to change who has access to this volume.
*SAME
You are not going to change the accessibility of the volume.
*NO This volume is not secured.
*YES This volume is secured. Only users with special authorities *ALLOBJ or *SAVSYS can read this
volume.
Top
Slot number (SLOT)
Specifies the slot number for the volume that you have selected to change.
*SAME
You are not going to change the slot number currently assigned to the volume.
*NONE
No slot number is assigned to the volume that you are changing.
slot-number
Specify the slot number that you are assigning to this volume. Slot numbers can range from 1 to
999999.
Top
Change Media using BRM (CHGMEDBRM) 39
System (SYSNAME)
Specifies the system identifier for the volume that you have selected to change.
*SAME
You are not going to change the system identifier currently assigned to the volume.
*LCL Specifies that the system is the local system. BRMS uses the default local location name,
LCLLOCNAME and not the system name SYSNAME. In most cases, the systems have the same
value specified in the LCLLOCNAME and in the SYSNAME. You can use the DSPNETA
command to view the system network attributes.
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to use this value.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to use this value.
Top
Text (TEXT)
Specifies text to describe the media that you are changing.
*SAME
You are not going to change the text that describes the volume.
*NONE
No text is specified to describe this volume.
text Specify text that describes the volume.
Top
Image catalog (IMGCLG)
Specifies the image catalog name for the tape volume which is being changed. If an image catalog name
is specified, the image catalog and image catalog entry for the volume must exist to use the volume.
Note: Use GO CMDCLG and GO CMDCLGE to view the menus for commands used to manage image
catalogs and image catalog entries.
*SAME
Use the same value as is currently assigned to the parameter.
*NONE
Specifies this is not a virtual volume.
image-catalog
Specifies the name of the image catalog which contains the image catalog entry for a virtual
volume.
Top
40 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Examples
Example 1: Changing a Volume in BRMS
CHGMEDBRM VOL(T00001) MEDCLS(QIC1000)
EXPDATE(*PERM) MOVDATE(’2/12/03’)
This command changes the media information for volume T00001. The media class has been changed to
QIC1000, the expiration date has been changed to *PERM and the last moved date has been changed to
February 12, 2003.
Top
Error messages
*ESCAPE Messages
BRM1147
Volume &1 not found.
BRM133E
Image catalog entry does not exist for virtual volume &2.
BRM133F
Image catalog does not exist for virtual volume &2.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Change Media using BRM (CHGMEDBRM) 41
42 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Change Job Scheduler (CHGSCDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
BRMS uses the i5/OS job scheduler as the default job scheduler. You can also choose to use the IBM Job
Scheduler for iSeries job scheduler as your default scheduler or select any other i5/OS job scheduler as
your default.
The Change Job Scheduler for BRM (CHGSCDBRM) command changes the job scheduler interface used
by BRMS. You can use the i5/OS job scheduler, which is the default, IBM Job Scheduler for iSeries or
another job scheduler that you choose. You can change the commands that BRMS uses to add, list and
select job schedule entries. You can also specify whether you want to be prompted when BRMS uses
these commands.
The following substitution variables can be used in these commands to pass values from BRMS to the
scheduler:
v &JOBNAME - QBRMBKUP or QBRMARC
v &REQUEST - will be either STRARCBRM or STRBKUBRM
v &APPL - BRMS
v &GROUP - control group name
You can change these to your operating requirements or choose to use the defaults.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Scheduler type *SYSTEM, *IJS, *USRDFN Optional,
Positional 1
ADDCMD Add a job command Character value, *SAME, *IJS, *SYSTEM Optional
ADDPMT Command prompt for add *NO, *YES Optional
LISTCMD List jobs command Character value, *SAME, *IJS, *SYSTEM Optional
LISTPMT Command prompt for list *NO, *YES Optional
SLTCMD Select jobs command Character value, *SAME, *IJS, *SYSTEM Optional
SLTPMT Command prompt for select *NO, *YES Optional
Top
Scheduler type (TYPE)
Specifies which scheduler you want to use for scheduling BRMS control groups and commands. Any
commercial or user developed scheduler can be used with BRMS.
© Copyright IBM Corp. 1998, 2006 43
*SYSTEM
Specifies that BRMS is to use the i5/OS job scheduler and its associated command set.
Note: When you specify *SYSTEM for the Scheduler type (TYPE) parameter, the ADDCMD,
ADDPMT, LISTCMD, LISTPMT, SLTCMD and SLTPMT parameters are ignored.
*IJS Specifies that BRMS is to use IBM Job Scheduler for iSeries and its associated command set.
Note: When you specify *IJS for the Scheduler type (TYPE) parameter, the ADDCMD, ADDPMT,
LISTCMD, LISTPMT, SLTCMD and SLTPMT parameters are ignored.
*USRDFN
Specifies that you want to use another scheduling package command set or change the way in
which BRMS starts the i5/OS job scheduler.
Note: When you specify *USRDFN in the Scheduler type (TYPE) parameter, all of the job
scheduler commands are displayed and can be changed.
Top
Add job command (ADDCMD)
Specifies an alternative command to be used by BRMS to add a job schedule entry. When you are in a
BRMS function that allows you to add a job to the job scheduler, the command that you specify here is
started in lieu of the BRMS default command.
*SAME
The command used does not change.
*IJS The Job Scheduler for iSeries command to add a job to the job schedule is used.
*SYSTEM
The i5/OS command to add a job to the job schedule is used.
user-command
Specify the command that you want BRMS to use when adding a job schedule entry.
Top
Command prompt for add (ADDPMT)
Specifies whether BRMS should prompt the command specified in the Add a job command (ADDCMD)
parameter.
*NO The command is not prompted when started by BRMS.
*YES The command is prompted when started by BRMS.
Top
List jobs command (LISTCMD)
Specifies an alternative command to be used by BRMS to list all jobs in the job schedule. When you are
in a BRMS function that allows you to list all jobs in the job schedule the command that you specify here
is started.
*SAME
The command used does not change.
*IJS The Job Scheduler for iSeries command to list all jobs in the job schedule is used.
44 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SYSTEM
The i5/OS command to list all jobs in the job schedule is used.
user-command
Specify the command that you want to use when listing all jobs in the job schedule.
Top
Command prompt for list (LISTPMT)
Specifies whether BRMS should prompt the command specified in the List jobs command (LISTCMD)
parameter.
*NO The command is not prompted when started by BRMS.
*YES The command is prompted when started by BRMS.
Top
Select jobs command (SLTCMD)
Specifies an alternative command to be used by BRMS to list selected jobs in the job schedule. When you
are in a BRMS function that allows you to select a list of BRMS jobs in the job schedule, the command
that you specify here is started.
*SAME
The command used does not change.
*IJS The Job Scheduler for iSeries command to select jobs in the job schedule is used.
*SYSTEM
The i5/OS command to select jobs in the job schedule is used.
user-command
Specify the command that you want BRMS to use when listing BRMS jobs in the job schedule.
Top
Command prompt for list (SLTPMT)
Specifies whether BRMS should prompt the command specified in the Select jobs command (SLTCMD)
parameter.
*NO The command is not prompted when started by BRMS.
*YES The command is prompted when started by BRMS.
Top
Examples
CHGSCDBRM TYPE(*USRDFN) ADDCMD(’ADDJOBJS JOB(&JOBNAME)
APP(&APPL) SCDCDE(*DAILY) TIME (2300)
CMD(&REQUEST)’) ADDPMT(*YES)
This command changes the CL command used by BRMS to add a job schedule entry. In this example, an
alternative scheduler is being used. When adding a back up job to the schedule BRMS will use the
ADDJOBJS command and the substitution variables specified here.
Change Job Scheduler (CHGSCDBRM) 45
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
46 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Check Expired Media for BRM (CHKEXPBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Check Expired Media for BRM (CHKEXPBRM) command is used to check to see if there is enough
expired media to satisfy the media requirements of a save operation. The command calculates the media
of a specified media class available for a save operation, taking into account the location of the media
based on the location specified in the media policy or a location that you specify. You can calculate the
available media for single or multiple media classes, with single or multiple location combinations
depending on the values that you specify in the command.
For instance, if you specified 20 in the Required volumes field, FMT2GB in the Media class field and
*HOME in the Location field, you would have one media class, location combination. If you changed the
Location field to *ANY, you could potentially receive messages about media class availability for each of
the locations that you have set up that have the specified media class. If you had a situation where you
specified *MEDPCY in the Required volumes field, *CTLGRP in the Media policy field and *ALL in the
Control group field, then you would expect to have multiple media class, location combinations. The
command returns messages that specify whether enough media is available for each media class, location
combination.
This command works in conjunction with the value specified in the Required volumes field. The value
can be a specified number of volumes or a special value for media policy. The number of available
volumes calculated by the CHKEXPBRM command is compared against the value in the Required
volumes field. If the expired media calculated by the CHKEXPBRM command is greater than or equal to
the Required volumes field value, the save operation can continue. If the value is less, then the save
operation is canceled.
The number of expired volumes can also be checked by user jobs using the CHKEXPBRM command. For
example, the CHKEXPBRM command could be incorporated into a job scheduler and used to determine
at various times if there is enough expired media available for a save operation.
This command is used by all BRMS save operations.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
EXPMED Required volumes 1-9999, *MEDPCY Required,
Positional 1
MEDCLS Media class Name Optional
LOC Location Name, *ANY, *HOME Optional
MEDPCY Media policy Name, *CTLGRP Optional
CTLGRP Control group Single values: *ALL
Other values (up to 50 repetitions): Name, *BKUGRP,
*SYSGRP, *SYSTEM
Optional
© Copyright IBM Corp. 1998, 2006 47
Keyword Description Choices Notes
DATE Date for save Character value, *CURRENT Optional
Top
Required volumes (EXPMED)
Specifies the number of expired volumes required to process a save operation. You can specify a number
of volumes or you can specify that you want to base the number of required volumes on a media policy.
When the command is processed the number of available expired volumes that meet the criteria are
counted and compared against the value specified here.
Note: If you specify *MEDPCY, the Media policy (MEDPCY) parameter is a required parameter.
*MEDPCY
The number of expired volumes required to process a save operation is the number of volumes
specified in the Required volumes field of the media policy specified in the Media policy
(MEDPCY) parameter.
number-of-volumes
Specify the number of volumes required for the save operation.
Top
Media class (MEDCLS)
Specifies the media class of the expired volumes that you want to count.
This is a required parameter when a number is entered in the Required volumes (EXPMED) parameter.
If you enter a media policy, the media class is derived from the media policy.
Top
Location (LOC)
Specifies the location of the media to be included in the count of expired volumes.
*ANY Expired volumes of the media class or classes at each location are included in the count of
expired volumes available for a save operation.
*HOME
Only expired volumes at the home location are included in the count of expired volumes
available for a save operation.
location
Specify the location whose expired volumes are to be included in the count of expired volumes.
Top
Media policy (MEDPCY)
Specifies the media policy that you want to use to determine the required number of expired volumes for
the save operation.
This a required parameter when *MEDPCY is specified in the Required volumes (EXPMED) parameter.
48 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*CTLGRP
Use the media policy associated with a control group to determine the number of expired
volumes required for the save operation. The Control group (CTLGRP) parameter is a default
with the *CTLGRP choice.
media-policy
Specify the media policy to use to determine the number of expired volumes required for the
save operation.
Top
Control group (CTLGRP)
Specifies the name of the control group or all control groups whose media policy you want to use to
determine the required number of expired volumes required for the save operation.
This is a default field when *CTLGRP is specified in the Media policy (MEDPCY) parameter.
Single values
*ALL The media policy of each backup control group is used to determine the number of volumes
required for each media class, location combination for the save operation.
Other values (up to 50 repetitions)
*BKUGRP
The media policy used by the default backup user data control group is used to determine the
number of volumes required for the media class, location combination for the save operation.
*SYSGRP
The media policy used by the default system data control group is used to determine the number
of volumes required for the media class, location combination for the save operation.
*SYSTEM
The media policy used by the default backup entire system control group is used to determine
the number of volumes required for the media class, location combination for the save operation.
control-group-name
Specify the name of the backup control group, such as WEEKLY that you want to use to
determine the number of volumes required for the media class, location combination for the save
operation.
Top
Date for save (DATE)
Specifies the date that the control group was saved.
*CURRENT
The current date is used to determine the control group and its associated media policy.
expiration-date
Specify the date to use to determine the control group and its associated media policy.
number-of-days
Specify a number of days to calculate a future date to be associated with a control group.
Top
Check Expired Media for BRM (CHKEXPBRM) 49
Examples
Example 1: Checking on Available Volumes
CHKEXPBRM EXPMED(50) MEDCLS(FMT2GB) LOC(*HOME)
This command checks to see if there are 50 expired volumes of media class FMT2GB available for a save
operation at the home location.
Top
Error messages
*ESCAPE Messages
BRM1118
No active entries found in control group &1.
BRM1157
Control group &1 not found.
BRM1169
Policy &1 not found.
BRM1441
Media usage not valid, control group not processed;
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1930
Request for &1 expired volumes for media class &3 was not successful.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
50 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Copy Media Info for BRM (CPYMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
This command is typically used when you are bringing a system into a network of systems that share
BRMS media inventory information. The Copy Media Information using BRM (CPYMEDIBRM) command
copies media inventory information to a work file, or copies the contents of the work file to the media
inventory.
Using the CPYMEDIBRM command prior to adding the system name to a BRMS network allows you to
save the contents of the current media inventory into the work file. After network synchronization is
complete, you can use CPYMEDIBRM with OPTION (*FROMFILE) on the newly added system to copy
the original media inventory information back into the media inventory. Information that is inconsistent
with the system’s new network level media inventory information will be reported but unresolved when
OPTION(*FROMFILE) is used.
The Media Merge report is produced when the CPYMEDIBRM command is processed. The report will
indicate differences that have been diagnosed. The report, if printed, is written to printer file QP1AEN.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v The BRMS Network feature (Option 1) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
OPTION Type of copy *TOFILE, *FROMFILE Optional,
Positional 1
FILE File Qualified object name Optional
Qualifier 1: File Name, QA1AMED
Qualifier 2: Library Name, *LIBL, *CURLIB
CPYMEDI Copy media information *NO, *YES Optional
Top
Type of copy (OPTION)
This command is designed to allow you to merge existing BRMS information from the current system
with an existing network group of one or more systems.
The command allows you to store temporary copies of the current systems BRMS information to a
temporary file. After an Initialize BRM (INZBRM) command using the option *NETSYS is used, the
stored temporary copies can be merged in with the BRMS information brought from the other system
© Copyright IBM Corp. 1998, 2006 51
*TOFILE
You are copying media information from the media inventory to a work file. This option should
be used before an INZBRM *NETSYS.
*FROMFILE
You are copying media information from the work file to the media inventory. Information that is
inconsistent with the system’s new network level media inventory information will be reported
but unresolved when OPTION(*FROMFILE) is used. This option should be used after an
INZBRM *NETSYS.
Top
File (FILE)
Specifies the name of the work file that BRMS uses when it copies media inventory information.
Qualifier 1: File
QA1AMED
The media inventory file is copied to or from this file depending on the value specified in the
File to copy (OPTION) parameter.
file-name
Specify the name of the file that you want to use when copying the media inventory. If the file
that you specify does not exist, BRMS will create it for you.
Qualifier 2: Library
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no current library entry exists in the
library list, QGPL is used.
library-name
Specify the library name where the file is located.
Top
Copy media information (CPYMEDI)
Specifies whether you want to copy media information for the media inventory that you are copying.
Note: *NO should be specified if you are planning to attach your system to a network.
*NO Media information is not copied.
*YES Media information is copied.
Top
52 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Examples
Example 1: Copying BRMS Media Information To a File
CPYMEDIBRM FILE(WORKFILE)
This command copies BRMS media information to a file called WORKFILE.
Example 2: Copying BRMS Media Information From a File
CPYMEDIBRM OPTION(*FROMFILE) FILE(WORKFILE)
This command copies BRMS media information from a file called WORKFILE to the network media
inventory.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Copy Media Info for BRM (CPYMEDIBRM) 53
54 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Dump BRMS (DMPBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Dump BRM (DMPBRM) command saves BRMS files and related files to assist IBM support personnel
in problem determination. You can specify various levels of detail and one or more job logs to dump.
This command saves various files from QUSRBRM and related system files (depending on the specified
level) to a device or save file. This information is used in problem determination by your technical
representative. Processing this command should be done in conjunction with this representative.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
DEV Device Name, *SAVF Required,
Positional 1
VOL Volume identifier Character value, *MOUNTED Optional
LVL Level 1-9, *ALL Optional
TGTRLS Target release Character value, *CURRENT Optional
DMPDEV Dump device Single values: *ALL, *NONE
Other values (up to 10 repetitions): Name
Optional
JOBLOG Joblog to dump *NONE, *JOB Optional
JOB Job name Single values: *
Other values (up to 10 repetitions): Element list
Optional
Element 1: Job name Qualified job name
Qualifier 1: Job name Name
Qualifier 2: User Name
Qualifier 3: Number 000000-999999
Top
Device (DEV)
Specifies the name of the device or save file to which you want the dump information to be saved.
*SAVF Write the dump information to a save file.
device-name
Specify the name of the device to which you want to write the dump information.
Top
© Copyright IBM Corp. 1998, 2006 55
Volume identifier (VOL)
Specifies the volume identifier to dump the data to.
*MOUNTED
Any labeled volume that is placed in the specified device is used.
volume-identifier
Specify the identifier of the labeled volume to use.
Top
Level (LVL)
Specifies the level of detail to be included in the dump. The level of detail can range from 1 to 9 with 1
being the least amount of detail and 9 being the most detail. You should ask your support representative
for the level of detail to specify.
*ALL Include all information required by your service provider.
level-of-detail
Specify the level of detail that you want to include in the dump.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
56 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Dump device (DMPDEV)
Specifies a device or devices for which you would like to get diagnostic information. When specified,
BRMS invokes the QTADMPDV API to gather this information using the special value *SPLF as the
problem identifier.
Note: When an *APPC or *NET type device is specified for this parameter, BRMS will dump the
save/restore flight recorder.
Single values
*ALL All devices defined to BRMS are included in the information to be gathered.
*NONE
No devices are specified.
Other values (up to 10 repetitions)
device-name
Specify the device for which you want to gather diagnostic information.
Top
Joblog to dump (JOBLOG)
Specifies whether you want to dump job log information.
*NONE
Do not dump job log information.
*JOB Dump job log information from the specified jobs.
Top
Job (JOB)
Specifies the name of the job whose job log information is to be retrieved.
Single values
* Dump information from the current job.
Other values (up to 10 repetitions)
Qualifier 1: Job name
job-name
Specify the name of the job to be dumped. If no job qualifier if given, all of the jobs currently in
the system are searched for the simple job name.
Qualifier 2: User
user-name
Specify the name that identifies the user profile under which the job is run.
Qualifier 3: Number
number
Specify the job number assigned by the system.
Dump BRMS (DMPBRM) 57
Top
Examples
DMPBRM DEV(TAP01) LVL(2) JOBLOG(*JOB)
This command causes level 2 dump information, along with the job log for the current job, to be written
to tape unit TAP01.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4060
BRMS product initialization required.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
58 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Display ASP Information (DSPASPBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Display ASP Information (DSPASPBRM) command shows you the Display ASP Information display.
This display shows you a summary of all auxiliary storage pools (ASP) that are set up and various
statistical information about the auxiliary storage pools on your system.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
The report that is produced is the Display ASP Information report. The report, if printed, is written to the
printer file QP1AASP.
Top
Examples
Example 1: Printing the Display ASP Information Report
DSPASPBRM OUTPUT(*PRINT)
This command prints the Display ASP Information report.
Top
Error messages
*ESCAPE Messages
© Copyright IBM Corp. 1998, 2006 59
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
60 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Display Backup Plan using BRM (DSPBKUBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Display Backup Plan using BRM (DSPBKUBRM) command shows you the Display Backup Plan
display or prints the Backup Plan report. The Display Backup Plan display or report shows you a
summary of all backup control groups that are set up, the libraries, special values and lists that are in
each backup control group and the type of backup that each control group performs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
The report that is produced is the Backup Plan report. The report, if printed, is written to the printer file
QP1ABP.
Top
Examples
Example 1: Printing the Display Backup Plan Report
DSPBKUBRM OUTPUT(*PRINT)
This command prints the Display Backup Plan report.
Top
Error messages
*ESCAPE Messages
© Copyright IBM Corp. 1998, 2006 61
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
62 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Display Duplicate Media (DSPDUPBRM)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
The Display Duplicate Media using BRM (DSPDUPBRM) command displays all duplicate copies of a
volume that you specify. The Display Duplication Cross Reference display includes volume identifier,
sequence number, expiration date and duplication time and date. Volumes that are the original and the
copy are identified as input (*INP) or output (*OUT) respectively.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v This command can not be run in batch.
Top
Parameters
Keyword Description Choices Notes
VOL Volume identification Character value Required,
Positional 1
Top
Volume identification (VOL)
Specifies the volume identifier of the volume that you want to review for duplication. The volume and all
the resulting duplicate volumes are shown. If the specified volume is a member of a media set all the
original volumes and their duplicate volumes are shown.
This is a required parameter.
Top
Examples
Example 1: Displaying Duplicate Volumes
DSPDUPBRM VOL(T00001)
This command shows all duplicate copies of volume T00001 on the Display Duplication Cross Reference
display.
Top
Error messages
*ESCAPE Messages
© Copyright IBM Corp. 1998, 2006 63
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
64 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Display Log for BRM (DSPLOGBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Display Log for BRM (DSPLOGBRM) command displays the BRMS log. The BRMS log is a display
by date and time of messages that BRMS has created as a result of processing. The DSPLOGBRM
command allows you to display or print all or part of the log.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type *ALL, *ARC, *BKU, *MAINT, *MED, *MGR, *RCY, *RTV,
*SEC
Optional,
Positional 1
PERIOD Time period for log output Element list Optional
Element 1: Start time and
date
Element list
Element 1: Beginning time Time, *AVAIL
Element 2: Beginning date Character value, *CURRENT, *BEGIN
Element 2: End time and
date
Element list
Element 1: Ending time Time, *AVAIL
Element 2: Ending date Character value, *CURRENT, *END
SEV Severity 0-99, 00 Optional
OUTPUT Output *, *PRINT Optional
DETAIL Detail *BASIC, *FULL Optional
USER User Name, *ALL Optional
MSGID Message identifier Name, *ALL Optional
Top
Type (TYPE)
Specifies the type of entry for which you want to review log entries.
Note: The default parameter for Type (TYPE) parameter depends on the area that you use to access this
command. For instance, if you access this command from a backup menu, the default Type is *BKU. If
you access the command from the archive menu, the default Type is *ARC and so on. If you type the
command on a command line or from the System Policy display, the default is *ALL.
*ALL Selects all log entries for display or print.
*ARC Selects only archive log entries for display or print.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
© Copyright IBM Corp. 1998, 2006 65
*BKU Selects only back up log entries for display or print.
*MAINT
Selects only maintenance log entries for display or print.
*MED Selects only media management log entries for display or print.
*MGR Selects only migration log entries for display or print.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*RCY Selects only recovery log entries for display or print.
*RTV Selects only retrieve log entries for display or print.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*SEC Selects only security log entries to be displayed or printed. Any log entries whose primary area
or secondary area are security will be displayed. An entry may be logged for any reason and
have security as a secondary area.
Top
Time period for log output (PERIOD)
Specifies the period of time for which the log entries are selected for the display or report.
Element 1: Beginning time and date
Log entries created on or after the beginning date and time are selected. Log entries created prior to the
beginning date and time are not selected.
Element 1: Beginning time
Specifies the beginning time at which or after log entries are selected.
*AVAIL
Any entries available for the beginning date are selected.
begin-time
Specifies the beginning time for the beginning date for which log entries are selected.
The time is specified in 24-hour format and can be specified with or without a time separator:
v Without a time separator, specify a string of 4 or 6 digits (hhmm or hhmmss) where hh=hours,
mm=minutes and ss=seconds. Hours, minutes, and seconds must each be exactly 2 digits
(using leading zeros if necessary).
v With a time separator, specify a string of 5 or 8 digits where the time separator specified for
your job is used to separate the hours, minutes, and seconds. If you enter this command from
the command line, the string must be enclosed in apostrophes. If a time separator other than
the separator specified for your job is used, this command will fail.
Element 2: Beginning date
Specifies the beginning date for which the log entries are selected.
*CURRENT
Log entries with the current date are selected.
*BEGIN
Log entries from the beginning of all available log entries are selected.
66 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
begin-date
Specifies the beginning date for which log entries are selected. The date must be specified in the
job date format.
Element 2: Ending time and date
Log entries created on or before the ending date and time are selected. Log entries created after the
ending date and time are not selected.
Element 1: Ending time
One of the following is used to specify the ending time before which log entries are included. Any items
created after the specified time and date are not included in the log entries for the report.
Specifies the ending time at which or before log entries are selected.
*AVAIL
Any entries available for the ending date are selected.
end-time
Specifies the ending time for the ending date for which log entries are selected.
The time is specified in 24-hour format and can be specified with or without a time separator:
v Without a time separator, specify a string of 4 or 6 digits (hhmm or hhmmss) where hh=hours,
mm=minutes and ss=seconds. Hours, minutes, and seconds must each be exactly 2 digits
(using leading zeros if necessary).
v With a time separator, specify a string of 5 or 8 digits where the time separator specified for
your job is used to separate the hours, minutes, and seconds. If you enter this command from
the command line, the string must be enclosed in apostrophes. If a time separator other than
the separator specified for your job is used, this command will fail.
Element 2: Ending date
Specifies the ending date for which the log entries are selected.
*CURRENT
Log entries with the current date are selected.
*END Log entries to the end of all available log entries are selected.
end-date
Specifies the ending date for which log entries are selected. The date must be specified in the job
date format.
Top
Severity (SEV)
Specifies the message severity level that you want to include in the display or print. For example, a
severity level of 30 would include all messages that are severity level 30 and above. The severity level
can be specified from 0 to 99.
00 The default severity level is zero.
severity-level
Specify the message severity level that you want to display.
Top
Display Log for BRM (DSPLOGBRM) 67
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
The report that is produced is the BRMS Log report. The report, if printed, is written to the printer file
QP1ALG.
Top
Detail (DETAIL)
Specifies the format used for the printed output.
*BASIC
The entries are printed in abbreviated list format.
*FULL The detail of each entry is printed in an expanded format.
Top
User (USER)
Specifies the name of the user profile for the log entries that you want to display or print.
*ALL Include all user profiles in the display or report.
user-name
Specify the user profile whose log entries you want to include in the display or report.
Top
Message identifier (MSGID)
Specifies the message identifier for the log entries that you want to display or print.
*ALL Include all message identifiers in the display or report.
message-identifier
Specify the message identifier whose log entries you want to include in the display or report.
Top
Examples
Example 1: Displaying BRMS Log Entries for a Date Range and Severity Level
DSPLOGBRM TYPE(*BKU) PERIOD((*AVAIL *BEGIN) (*AVAIL *END))
SEV(20)
This command displays backup log entries and the range of dates is from the beginning of the log to the
end of the log. Log entries related to backups will be displayed in the Display BRM Log Information
display that have a severity level of 20 or above.
68 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Display Log for BRM (DSPLOGBRM) 69
70 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Duplicate Media using BRM (DUPMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Duplicate Media using BRM (DUPMEDBRM) command copies the contents of a single volume, a
single volume in a media set, media set, or set of marked saved items to other volumes. You can specify
the volumes which are to be duplicated, or specify a search be performed to identify the volumes or
saved items which are to be duplicated. You can also resume a previous duplication operation which
ended with errors.
Note: The tape devices do not have to support the same media classes. The media policy is specified in
the DUPMEDBRM command.
Note: The density field in the file header labels are changed to reflect the true density.
Note: If you are using DUPMEDBRM to copy a file group, the output media assumes the group number
of the input media. An exception to this is if a Set Media Controls using BRM (SETMEDBRM) command
overrides the value for file group and type for the output volumes.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The volumes to be copied must be active volumes, be members of the BRMS media inventory.
2. If you are copying a media set in batch mode by specifying a volume of the media set in the VOL
parameter, you must use the special value *SET in the FROMVOL parameter.
3. You cannot duplicate TSM (ADSM) media using the DUPMEDBRM command.
4. Devices whose category is *APPC or *NET cannot be used to duplicate data using the DUPMEDBRM
command.
5. You must have two tape drives to use this command. If the devices are shared devices, BRMS will
vary the devices on for you. If the devices are not shared devices, you must vary them on.
6. If you are using devices with optimum block size enabled, the optimum block size supported by the
output device must be greater than or equal to the optimum block size of the input device.
Top
Parameters
Keyword Description Choices Notes
VOL From volume identifier Character value, *LIST, *RESUME, *SCHHST, *SEARCH Required, Key,
Positional 1
RSMKEY Resume key 1-999999, *ALL Optional
FILEGRP File group Name, *ALL, *NONE, *ARCGRP, *BKUGRP, *SYSGRP,
*SYSTEM
Optional,
Positional 2
GRPTYPE File group type Name, *ALL, *ARC, *BKU Optional,
Positional 3
SCHMEDCLS From media class Name, *ALL Optional
FROMDEV From device Name Optional
© Copyright IBM Corp. 1998, 2006 71
Keyword Description Choices Notes
TODEV To device Name Optional
FROMSEQNBR From sequence number Single values: *ALL
Other values: Element list
Optional
Element 1: Starting file
sequence number
1-16777215, *FIRST
Element 2: Ending file
sequence number
1-16777215, *LAST, *ONLY
TOSEQNBR To sequence number 1, *END Optional
MEDPCY To media policy Name, *SYSPCY, *NONE Optional
FROMVOL Input volume list Single values: *VOL, *SET
Other values (up to 300 repetitions): Character value
Optional
FROMENDOPT From device end option *REWIND, *LEAVE, *UNLOAD Optional
TOENDOPT To device end option *UNLOAD, *LEAVE, *REWIND Optional
FROMSYS From system Character value, *LCL Optional
TOVOL To volume identifier Single values: *MOUNTED
Other values (up to 300 repetitions): Character value
Optional
OBJDTL Retain object detail *NO, *YES Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
VOLSEC Secure volume *MEDPCY, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
SAVMEDINF Save media information *NONE, *BKUPCY, *LIB, *OBJ Optional
Top
From volume identifier (VOL)
Specifies the volumes to be duplicated or the type of search used to identify volumes or saved items to
be duplicated.
This parameter can be used in conjunction with the Input volume list (FROMVOL) parameter to specify
the volume or volumes that you want to copy. You can copy a single volume, volumes in a media set, a
list of volumes or all volumes marked for duplication. If you want to copy a single volume or a single
volume in a media set, specify the name of the volume that you want to copy in the VOL parameter and
the special value *VOL in the FROMVOL parameter.
Note: If you are prompting the command, use F9 to display all command parameters before you specify
a volume in the VOL parameter. The prompter will set the default value in the FROMVOL parameter to
*VOL.
For instance, if you are copying a volume T00009, which is not a member of a media set, you would
prompt the command, press F9, then enter T00009 in the VOL parameter. The *VOL should be the default
value displayed in the FROMVOL parameter.
If the volume is a member of a media set you would follow the same procedure.
72 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If you are not sure if a volume is a member of a media set, enter the volume in the VOL parameter and
press the Enter key. If the volume is a member of a media set, the volume identifiers of all volumes in the
set will be displayed in the FROMVOL parameter.
For instance, if you had a media set made up of T00001, T00002 and T00003 and you can enter T00002 in
the VOL parameter and pressed the enter key. Volumes T00001, T00002 and T00003 would be displayed
in the FROMVOL parameter. The volumes in the FROMVOL parameter cannot be changed at this point.
This helps assure that you are duplicating all members of the set.
An alternate method of copying a media set is to specify a volume contained in the media set in the VOL
parameter and using the special value *SET for the FROMVOL parameter.
You can specify *LIST in the VOL parameter to copy a list of volumes that you specify in the FROMVOL
parameter.
You can specify *SEARCH in the VOL parameter to search the media inventory for the marked volumes
that are to be duplicated, or *SCHHST to search the history information for marked saved items to be
duplicated. When using *SEARCH or *SCHHST the FROMVOL parameter is not used.
This is a required parameter.
*LIST Specify this special value to duplicate a list of active volumes that you specify. Enter the list of
volumes that you want to duplicate in the FROMVOL parameter.
*RESUME
Specify to resume history or media duplication operations which end with errors. Use the
Resume key (RSMKEY) parameter to specify the duplication operation to be resumed.
Note: You must correct any errors which caused the duplication operation to end before you
resume the duplication operation.
*SCHHST
All saved items that are marked for duplication, and meet the specified search values are
duplicated. Search values are specified by using the following parameters:
v File group (FILEGRP) parameter
v File group type (GRPTYPE) parameter
v Media class (SCHMEDCLS) parameter
v From system (FROMSYS) parameter
*SEARCH
All active volumes that are marked for duplication, and meet the specified search values are
duplicated. Search values are specified by using the following parameters:
v File group (FILEGRP) parameter
v File group type (GRPTYPE) parameter
v Media class (SCHMEDCLS) parameter
v From system (FROMSYS) parameter
from-volume-identifier
Specify the name of the volume that you want to duplicate. The volume identifier that you
specify must be a active volume that is in the BRMS media inventory.
Top
Duplicate Media using BRM (DUPMEDBRM) 73
Resume key (RSMKEY)
Specifies the previous duplication operation to resume. You may want to resume a previous duplication if
the operation ended with errors.
A resume key is returned in the recovery text of diagnostic message BRM4137 for duplication operations
which end with errors.
A resume key for pending duplication of saved items is also displayed on the Duplication view of the
Work with Media Information display. Use the Work with Media Information (WRKMEDIBRM)
command to display the saved items, then use F11 to select the Duplication view.
Note: This parameter is required when *RESUME is specified for the Volume (VOL) parameter.
*ALL All pending duplications of saved items with resume keys are duplicated.
1-999999
The pending duplication of saved items having the specified resume key are duplicated.
Top
File group (FILEGRP)
Specifies the file group that you want search for and duplicate the volumes that contain the specified file
group.
*ALL Include all file groups that meet the other specifications in the search.
*ARCGRP
Include volumes that contain the default archive control group in the group of files to duplicate.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
Include volumes that contain the default backup user data control group in the group of files to
duplicate.
*SYSGRP
Include volumes that contain the default system data control group in the group of files to
duplicate.
*SYSTEM
Include volumes that contain the default backup entire system control group in the group of files
to duplicate.
file-group
Specify the name of the file group whose volume you want to be duplicated.
Top
File group type (GRPTYPE)
Specifies the type of file group that you want to search for and duplicate the volumes that contain the
specified file group type.
*ALL Include all file groups that meet the other specifications in the search.
*ARC The file group is an archive file group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
74 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*BKU The file group is a backup file group.
file-group-type
Specify the file group type that you want to include in the search.
Top
From media class (SCHMEDCLS)
Specifies the media classes that you want to search for and duplicate the input volumes that are
associated with the specified media class.
This parameter is only used in conjunction with the From volume identifier (VOL) parameter when the
special value *SEARCH is specified.
*ALL Include all media classes that meet the other specifications in the search.
from-media-class
Specify the name of the media class that you want to duplicate.
Top
From device (FROMDEV)
Specifies the device name from which the volume or volumes is copied.
This is a required parameter.
Top
To device (TODEV)
Specifies the device name on which you are placing the volume that you want to copy to.
This is a required parameter.
Top
From sequence number (FROMSEQNBR)
Specifies which data file sequence numbers are to be copied.
Note: If *ALL is specified for Starting file sequence number, or *FIRST for Starting file sequence number
and *LAST for Ending file sequence number, then file sequences prior to *FIRST or after *LAST which do
not reside in the history information for the volumes will not be duplicated.
Single values
*ALL All files are duplicated.
Element 1: Starting file sequence number
*FIRST
All files starting with the first file sequence are duplicated.
Duplicate Media using BRM (DUPMEDBRM) 75
file-sequence-number
Specify the starting file sequence number do be duplicated. The valid range of sequence numbers
is 1 through 16777215. Only the files in the specified sequence number range are duplicated.
Element 2: Ending file sequence number
*LAST
All files ending with the last file sequence are duplicated.
*ONLY
Only the file specified in the starting file sequence is duplicated. If *ALL is specified in the first
element, then this parameter is ignored.
file-sequence-number
Specify the ending file sequence number of the range to be duplicated. The valid range of
sequence numbers is 1 through 16777215.
Top
To sequence number (TOSEQNBR)
Specifies which sequence number the data files are to be copied to.
1 The data files are copied to file sequence 1.
*END The data files are added to the logical end of tape. The next valid sequence number is used.
file-sequence-number
Specify the sequence number in which the data file will be copied to. This value is not allowed if
the device does not have overwriting capabilities and the value specified is not the next logical
value to be used at the end of the logical tape volume.
Top
To media policy (MEDPCY)
Specifies the media policy for the volumes to which you are copying.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
*SYSPCY
The media policy specified in the system policy is used as the value for media policy.
*NONE
No media policy is specified for this duplication operation. Media policy values must be supplied
from the command for each parameter that has a default of *MEDPCY.
to-media-policy-name
Specify a media policy that has been set up in the BRMS. You can press F4 to get a list of these
media policies.
76 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Input volume list (FROMVOL)
Specifies the list of volumes that are to be copied. This parameter works in conjunction with the From
volume identifier (VOL) parameter to specify the volume or volumes that you want to copy. You can
copy a single volume, a set of volumes or a list of volumes. You can specify up to 300 volumes in the
FROMVOL parameter.
To copy a single volume, specify a volume in the VOL parameter and specify the special value *VOL in
the FROMVOL parameter.
Note: If you are prompting the command, use F9 to display all command parameters before you specify
a volume in the VOL parameter. The prompter will set the default value in the FROMVOL parameter to
*VOL.
If you are not sure if a volume is a member of a media set, enter the volume identifier in the VOL
parameter and press the Enter key. If the volume is a member of a media set, the volume identifiers of all
volumes in the set will be displayed in the FROMVOL parameter.
If you specify *LIST in the VOL parameter, you can enter a list of volumes to copy in the FROMVOL
parameter.
If you specify *SEARCH in the VOL parameter, this parameter is not used.
If you want to duplicate the volumes in a media set, specify a volume of the media set in the VOL
parameter and specify *SET in the FROMVOL parameter. You must use this method to duplicate the
volumes of a media set in a batch job.
Single values
*VOL You want to copy a single volume that is specified in the VOL parameter. The *VOL special value
is displayed but not used when the special value *SEARCH is specified in the VOL parameter.
*SET Specify this special value to copy all volumes in a media set when only one volume of the set is
specified in the VOL parameter. If you are copying a media set in batch mode by specifying a
volume of the media set in the VOL parameter, you must use the special value *SET in the
FROMVOL parameter.
Other values (up to 300 repetitions)
volume-identifier
Specify the volume identifiers of a list of active volumes, that you want to duplicate.
Top
From device end option (FROMENDOPT)
Specifies whether the volume placed on the device specified on the From device (FROMDEV) parameter
is rewound and unloaded after the operation completes.
*REWIND
The volume is automatically rewound, but not unloaded after the operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
Duplicate Media using BRM (DUPMEDBRM) 77
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
To device end option (TOENDOPT)
Specifies whether the volume placed on the device specified on the To device (TODEV) parameter is
rewound and unloaded after the operation is completed.
*UNLOAD
The volume is rewound and unloaded after the operation is completed.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*REWIND
The volume is rewound after the operation is completed.
Top
From system (FROMSYS)
Specifies the location and network identification of the system that owns the volumes you would like to
duplicate. When specifying a remote system, the input and output volumes used in the operation will be
owned by the specified system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
78 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
To volume identifier (TOVOL)
Specifies the volume identifiers of the volumes to which data is being copied.
The volume identifier that you specify must be a volume that is in the BRMS media inventory.
Single values
*MOUNTED
The volume identifier of the volume placed in the device specified on the To device (TODEV)
parameter is used. If the source volume is a standard labeled volume and the volume placed in
the device is not labeled or is initialized to the wrong density, the volume is reinitialized to the
correct density using the volume identifier of the source volume currently placed in the device.
Other values (up to 300 repetitions)
volume-identifier
Specify the volume identifier of the volumes to which data is being copied. When the end of a
volume is reached, you will be able to reinitialize the volume using this volume identifier. If the
volume contains the correct volume identifier but is in the wrong density, the volume will be
reinitialized to the correct density. The volume identifier is saved.
Top
Retain object detail (OBJDTL)
This parameter has no function. Object detail, including member level detail for physical files, is always
retained for duplicated media as long as object detail was available for the input volumes.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this duplication
operation.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this duplication operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this duplication operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this duplication
operation.
Duplicate Media using BRM (DUPMEDBRM) 79
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
duplication operation.
move-policy
Specify a move policy that will be assigned to output volumes from this duplication operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for output volumes created as a result of this duplication
operation.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSPCY
The value for media class in the system policy will be assigned to output volumes from this
duplication operation.
media-class
Specify a media class that will be assigned to output volumes from this duplication operation.
Top
Location (LOC)
Specifies the location that you want to use for output volumes created as a result of this duplication
operation.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Any valid location is assigned to output volumes from this duplication operation.
*HOME
The home location is assigned to output volumes from this duplication operation.
location
Specify a location that will be assigned to output volumes from this duplication operation.
Top
80 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Required volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any duplication can be
done using this media policy. The value can also be checked by user jobs using the Check Expired Media
for BRM (CHKEXPBRM) command.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a
duplication operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS
duplication operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether to mark volumes for duplication after they have been duplicated.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Do not mark volumes for duplication.
*YES Mark volumes for duplication.
Top
Duplicate Media using BRM (DUPMEDBRM) 81
Mark history for duplication (MARKHST)
Specifies whether to mark history items for duplication after they have been duplicated.
*MEDPCY
The value for this parameter is the media policy that is specified in the Media policy (MEDPCY)
parameter of this duplication command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Do not mark the history items for duplication.
*YES Mark the history items for duplication.
Top
Save media information (SAVMEDINF)
Specifies whether you want to automatically save the media information after duplication has run. The
media information is the changes to the save history and volume information that occur during the
duplication operation. You can specify whether the save history in the media information is saved at the
library or object level.
Note: Object level saved history information can only be saved if object level or member level detail was
retained when the objects were originally saved.
Note: The saved media information will be appended to the last output volume used for duplication.
*NONE
Specifies you do not want media information saved after duplication has run.
*BKUPCY
Specifies you want the Backup Policy to specify whether media information is saved after
duplication has run. If this value is specified, the current value of the Automatically backup
media information prompt on the Backup Policy will determine whether media information is
saved when this command is run.
*LIB Specifies you want media information saved after the duplication has run, but you only want to
save library level history information. With library level history information, you must know the
object names to restore individual objects.
*OBJ Specifies you want media information saved after the duplication has run and you want to save
object level history information. With object level history information, you can use BRMS to help
you locate saved objects that you want to restore such as physical files or members.
Top
Examples
Example 1: Copying a Single Volume
DUPMEDBRM VOL(T00001) FROMDEV(TAP01)
TODEV(TAP03) FROMVOL(T00001)
This command duplicates volume T00001 using TAP01 as the from device and TAP03 as the to device.
Because T00001 is not a member of a media set, the input list (FROMVOL) contains only T00001.
Example 2: Duplicating a List of Volumes
82 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
DUPMEDBRM VOL(*LIST) FROMDEV(TAPMLB01) TODEV(TAPMLB02)
MEDPCY(FMT3570) FROMVOL(VOL001 VOL002 VOL003)
This command duplicates volumes VOL001, VOL002 and VOL003 using media library TAPMLB01 as the
from device and media library TAPMLB02 as the to device using the media class in the FMT3570 media
policy for the to volumes.
Example 3: Duplicating a Volume Set
DUPMEDBRM VOL(VOL002) FROMDEV(TAPMLB01) TODEV(TAPMLB02)
FROMVOL(*SET) MEDPCY(FMT3570)
This command duplicates all volumes in the volume set which contains VOL002 using media library
TAPMLB01 as the from device and media library TAPMLB02 as the to device using the media class in the
FMT3570 media policy for the to volumes.
Example 4: Duplicating All Marked Volumes for Another System
DUPMEDBRM VOL(*SEARCH) FROMDEV(TAPMLB01) TODEV(TAPMLB02)
FROMSYS(SYSTEM_B)
If this command is run on SYSTEM_A, the command will search for all volumes marked for duplication
owned by SYSTEM_B using media library TAPMLB01 as the from device and media library TAPMLB02
as the to device. SYSTEM_A and SYSTEM_B are in a BRMS network and share the media library
resources.
Example 5: Resume a Previous Duplicate Media using BRM
DUPMEDBRM VOL(*RESUME) RSMKEY(123456)
This command resume a previous duplication operation which ended abnormally. The resume key 123456
was returned in message BRM4137 when the duplication operation ended with exception BRM4138.
Top
Error messages
*ESCAPE Messages
BRM15A2
Volume &1 cannot be duplicated by this system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1934
Media duplication not successful.
BRM1936
No media found for duplication.
BRM2338
Duplication completed with errors.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Duplicate Media using BRM (DUPMEDBRM) 83
BRM4138
Media duplication completed with errors.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
84 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Extract Media Information (EXTMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Extract Media Information (EXTMEDIBRM) command adds information about a volume in the BRMS
media file. You specify the identifier of the volume and what is contained on the volume.
BRMS records content information only for media already added to the BRMS media inventory, and then
only for media whose contents are currently shown as expired. If active contents information for the
media already exists, or if the media has not been added to the media inventory, no content information
is added.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
DEV Device Name Required,
Positional 1
VOL Volume identifier Character value, *MOUNTED Optional,
Positional 2
FILE File origin *FILE, *SAV, *SAVCFG, *SAVCHG, *SAVCHGDLO,
*SAVCHGOBJ, *SAVDLO, *SAVLIB, *SAVOBJ,
*SAVSECDTA, *SAVSYS
Optional
ENDOPT End of tape option *UNLOAD, *LEAVE, *REWIND Optional
Top
Device (DEV)
Specifies the name of the device on which you are loading the volume. The device name must be defined
in the BRMS device table.
Top
Volume identifier (VOL)
Specifies the volume identifier of the volume on the device whose information is being added to BRMS.
*MOUNTED
The information on the volume identifier that is loaded on the device is added to BRMS.
volume-identifier
Specify the volume identifier of the volumes from which data is being added to the BRMS media
content information.
© Copyright IBM Corp. 1998, 2006 85
Top
File origin (FILE)
Specifies the type of information that is stored on the volume.
*FILE The information on the volume is a file.
*SAV The information on the volume is IFS information.
*SAVCFG
The information on the volume is a save of configuration information.
*SAVCHG
The information on the volume is an incremental save of IFS information.
*SAVCHGDLO
The information on the volume is an incremental save of document information.
*SAVCHGOBJ
The information on the volume is an incremental object save.
*SAVDLO
The information on the volume is a full save of document information.
*SAVLIB
The information on the volume is a saved library.
*SAVOBJ
The information on the volume is a full object save.
*SAVSECDTA
The information on the volume is a save of security information.
*SAVSYS
The information on the volume is system save information.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the tape volume after
the save operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the tape is reached.
Note: If no objects are saved the volume is not opened and the ENDOPT parameter is ignored.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*REWIND
The volume is rewound, but not unloaded.
86 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Examples
Example 1: Adding Media Information
EXTMEDIBRM DEV(TAP06) FILE(*SAVLIB)
This command adds save library content information for the volume that is mounted on device TAP06 to
the BRMS media inventory.
Top
Error messages
*ESCAPE Messages
BRM1134
Device &1 not found.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
BRM6708
Command ended due to error.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Extract Media Information (EXTMEDIBRM) 87
88 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Initialize BRMS (INZBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Initialize BRMS (INZBRM) command performs several types of initialization. These are:
v Allows you to estimate the time to update the BRMS product to a future version and release.
v Allows you to start BRMS product initialization after installation or update.
v Allows you to estimate the time remaining to complete BRMS product initialization.
v Initializes all major files as well as establishing default policies and control groups
v Starts the subsystem for networking in a multi-system environment
v Allows you to reset BRMS and re-initialize all major files as well as establishing default policies and
control groups
v Creates auxiliary storage pool (ASP) descriptions
v Allows you to re-register all BRMS functional authority elements with the i5/OS registration facility.
This option is used during a full system recovery prior to restoring user profiles
v Allows you to change the system name for BRMS media information to a new system name when
restoring this information to a different system or logical partition
v Allows you to merge the BRMS database files contained on one library with the BRMS database files in
another library
The INZBRM command is used to add a system to a BRMS network group. The INZBRM command
must be processed from the system that you are adding to the network group.
Note: All references to system name assume that the system name and the system location name are the
same and are used interchangeably in the help information. If they are not the same, use the system
location name instead of the system name. You can review the setting for the system name and location
name by using the Display Network Attributes (DSPNETA) command from any command line.
Systems that are members of the network group share BRMS media inventory. Additions, changes and
removals from shared media inventory on any system in the network result in the same changes being
made to all systems that are members of the network group.
When a system is added to a network group, the media information common to the network group is
copied to the system that you are adding. The system’s media information is replaced by the network
group’s media information.
When a system is first added, it is added in an inactive status on an active network group member.
Note: This is accomplished by adding the system to a network group list using the Change Network
Group display which is found in the System Policy menu. When the system name is added to the list, it
is shown in inactive status.
The INZBRM OPTION(*NETSYS) option changes the status from inactive to active and synchronizes
media information.
The following shared BRMS information files are replaced on this system with the information from the
incoming system:
v Media inventory
© Copyright IBM Corp. 1998, 2006 89
v Media classes
v Media policies
v Container inventory
v Container classes
v Move policies
v Network systems
v Storage locations
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
2. All BRMS operations must be ended before running this command.
3. All object authority is required to run the *RUNPRDINZ option.
4. These additional restrictions apply when *MERGE is specified for the Option (OPTION) parameter:
v All BRMS operations must be ended if library QUSRBRM is specified for the To library (TOLIB)
parameter.
v Ownership of the from library and its objects and the to library and its objects will be changed to
QBRMS prior to the merge. The public authority will be changed to *USE.
v Exclusive locks will be placed on the physical files in the from library objects and to library objects
prior to the merge.
v Logical files will be deleted from the from library and to libraries prior to the merge.
Top
Parameters
Keyword Description Choices Notes
OPTION Option *DATA, *CHGSYSNAM, *DEVICE, *ESTPRDINZ,
*ESTPRDUPD, *MERGE, *NETSYS, *RESET,
*RUNPRDINZ, *SETAUT
Optional,
Positional 1
FROMSYS From system Character value Optional
PRVSYSNAM Previous system name Character value, *LCL Optional
NEWSYSNAM New system name Character value, *LCL Optional
FROMLIB From library Name Optional
MERGE Merge Single values: *ALL
Other values (up to 5 repetitions): *ARC, *BKU, *DEV,
*HST, *MED, *MGR
Optional
TOLIB To library Name Optional
TGTRLS Target release Character value Optional
Top
Option (OPTION)
Specifies which of the types of initialization you want to perform.
90 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*DATA
You are initializing BRMS. Default control groups, policies and tables are built based on the
characteristics of the system that is being initialized. Additionally, new devices are added and
ASPs are configured. Default ASP descriptions for ASPs defined to the system, but not already
defined to BRMS are added.
When ASPs are configured, the following default information is added:
v ASP name value is *NONE, with the exception of ASP 1, which is given the ASP name of
*SYSTEM.
v Low and high threshold values are set to *NONE.
v Text is ″Entry created by BRM configuration″.
If the parameter contains the special value *DATA, you must process the INZBRM command on
the system on which you want to initialize for BRMS.
This option does not affected the saved history.
No parameters are used with this option.
*CHGSYSNAM
Allows you to change the system name stored in the BRMS media information. The system name
is used to distinguish the media information of this system from the media information of other
systems in a BRMS network. The system name is applied to the media information even if you
do not use the BRMS networking feature. BRMS uses the system’s local network ID (LCLNETID)
and default local location name (LCLLOCNAME) for the system name. You can use the
DSPNETA command to view these system network attributes.
You must change the system name of the media information to the current system name when
recovering the BRMS media information to a different system or different logical partition having
a system name different from the saved system name. You must specify a previous system name
using the Previous system name (PRVSYSNAM) parameter and a new system name using the
New system name (NEWSYSNAM) parameter.
The From library (FROMLIB) , To library (TOLIB) and Merge (MERGE) parameters are not
used with this option.
*DEVICE
You are clearing device and media library information and re-initializing the files with the
devices currently described on the system. In addition to clearing and re-initializing the device
file, *DEVICE also performs the same functions as *DATA. Using the *DEVICE special value
causes CSI objects and APPC device information to be removed from the BRMS inventory if no
APPC device entries by the same name are found. Using the *DEVICE special value does not
cause NET device information to be removed.
This option does not affected the saved history.
No parameters are used with this option.
*ESTPRDINZ
Use this option to determine the approximate time required to complete initialization of the
BRMS program product after installation or update. An estimate of the initialization time is
returned in message BRM402B. For more precise estimates, always run this option in the same
system environment as the initialization job. If this option is run concurrently with product
initialization, the approximate time remaining is returned.
Product initialization is only required once following a product update. Use option *RUNPRDINZ
of this command to run product initialization after the update.
No parameters are used with this option.
Initialize BRMS (INZBRM) 91
*ESTPRDUPD
Use this option to determine the approximate time required to complete a BRMS program
product update to a future version and release. The time estimate is returned in message
BRM402C.
Note: The actual time could vary from the estimated time if the update occurs on a different
system or uses a different job environment.
You must specify a value for Target release (TGTRLS) when using this option.
*MERGE
Allows you to merge the BRMS database files contained in one library specified on the From
library (FROMLIB) parameter with the BRMS database files in another library specified on the
To library (TOLIB) parameter using options specified on the Merge (MERGE) parameter. This
function may be useful when consolidating multiple systems onto a single system, or copying
BRMS objects from library QUSRBRM to another library for subsequent archive. Refer to
Appendix A in the Backup Recovery and Media Services book for additional guidance on using
this option.
Note: Because of the extensive file processing involved in the merge operation, this could be a
long running process depending on the merge options you select and the size of the merged files.
Note: If you intend to merge more than one library to the current system it is recommended that
you merge these libraries to an intermediate library then perform a final merge of the
intermediate library into the QUSRBRM library.
The From system (FROMSYS), Previous system name (PRVSYSNAM) and New system name
(NEWSYSNAM) parameters are not used with this option.
*NETSYS
BRMS files will be copied from the system specified in the From system (FROMSYS) parameter
which should be in the network system group. Prior to using this option, use the Copy Media
Information (CPYMEDIBRM) command to copy the current BRMS information from this system
to a temporary file. After the INZBRM *NETSYS is complete, to merge the old information, use
the CPYMEDIBRM again to copy the information back from the temporary file. This option will
replace data in some current BRMS files.
Note: The BRMS Network feature (Option 1) is required to use this value.
Only the From system (FROMSYS) parameters is used with this option.
*RESET
You are resetting BRMS. When you use this option BRMS information is removed from your
system and all major files are re-initialized. Using OPTION(*RESET) clears all major BRMS files
and processes the INZBRM command OPTION(*DATA). This option erases all hierarchial storage
management (HSM) information and resets all configurations to be consistent with those created
when the product is first installed. Since APPC information is not automatically configured by
BRMS, *RESET removes all APPC device information from BRMS including any CSI objects that
may have been created.
No parameters are used with this option.
*RUNPRDINZ
Use this option to complete initialization of the BRMS program product after installation. The
BRMS program product cannot be used until initialization is complete. Product initialization is
only required once following a product update. Use this option if you receive message BRM40A2
- BRMS product initialization required when attempting to perform a BRMS operation after a
product update.
BRMS product initialization can be a long running process. Performance can be optimized by
running this option when there is little or no other activity on the server.
92 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Use option *ESTPRDINZ of this command to retrieve an approximation of the time required to
perform the initialization in the current environment.
Note: All object authority is required to use this option.
No parameters are used with this option.
*SETAUT
Allows you to re-register all BRMS functional authority elements with the i5/OS registration
facility. This option is used during a full system recovery prior to restoring user profiles.
No parameters are used with this option.
Top
From system (FROMSYS)
Specifies the name of any system which is already in the network group that you want the new system to
join. The network media information on the system that you specify here is copied to your system. For
example, if system A is a system that you want to add to the network and system B is an active member
of a network group, you would specify system B in the From system (FROMSYS) parameter. The
network media inventory from system B replace the media inventory on system A and system A has now
become an active member of the network group.
The following media inventory files are copied from the active system in a network group to replace the
media inventory files on the inactive system. You are notified before each file is replaced:
v Media inventory
v Media classes
v Media policies
v Container inventory
v Container classes
v Move policies
v Network systems
v Storage locations
Note: The BRMS Network feature (Option 1) is required to use this parameter.
location-name
Specify the name of the remote location associated with the from-system. The local system’s
network identifier, as seen by using the DSPNETA command, is used as the from-system’s
network identifier.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the
from-system. Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the
network identifier and cccccccc is the remote location name.
Top
Previous system name (PRVSYSNAM)
Specifies the previous name of the system when changing the system name in the media information for
recovery to a different system or different logical partition.
Initialize BRMS (INZBRM) 93
*LCL Specifies that the local system name is to be used for the previous system name. BRMS will use
this system’s local network ID (LCLNETID) and default local location name (LCLLOCNAME) for
the previous system name.
previous-system-name
Specifies the name that is to be used as the previous system name . If you specify this value,
BRMS will use the local network ID (LCLNETID) and the specified name to create the previous
system name.
network-id.location-name
Specify the local network identifier and default local location name that is to be used for the
previous system name. Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn
is the network identifier and cccccccc is the remote location name of the previous system.
Top
New system name (NEWSYSNAM)
Specifies the new name of the system when changing the system name in the media information for
recovery to a different system or different logical partition.
*LCL Specifies that the local system name is to be used for the new system name. BRMS will use this
system’s local network ID (LCLNETID) and default local location name (LCLLOCNAME) for the
new system name.
new-system-name
Specifies the name that is to be used as the new system name . If you specify this value, BRMS
will use the local network ID (LCLNETID) and the specified name to create the new system
name.
network-id.location-name
Specify the local network identifier and default local location name that is to be used for the new
system name. Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the
network identifier and cccccccc is the remote location name of the new system.
Top
From library (FROMLIB)
Specifies the name of the source library containing the BRMS files with the records to be merged. This
should be a version of the QUSRBRM library saved from another system and restored to the current
system using a different library name.
Note: Prior to the start of the merge operation, the ownership of the library and all objects in the library
will be changes to QBRMS and the public authority will be changed to *USE. Also, all logical files will be
deleted from this library and all physical files will be converted to the current release.
from-library-name
Name of the library containing the BRMS database files which are to be merged. Library
QUSRBRM cannot be specified as the from library.
Top
94 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Merge (MERGE)
Specifies the options for the merge process. These options define the types of BRMS data to be merged.
Single values
*ALL Specifies all BRMS media, device, history and policy files are to be merged.
Other values (up to 5 repetitions)
*ARC Specifies all BRMS archive control group and archive list files are to be merged.
*BKU Specifies all BRMS backup control group and backup list files are to be merged.
*DEV Specifies all BRMS user devices such as Tivoli Storage Manager (TSM) of type *NET and user
media library devices of type *USRMLB are to be merged.
*HST Specifies all BRMS media information files containing backup, archive and migration history are
to be merged.
*MED Specifies all BRMS volume information and media related files are to be merged.
*MGR Specifies all BRMS migration control group files are to be merged.
Top
To library (TOLIB)
Specifies the name of the target library containing the BRMS files which will receive the merge records.
Note: Always save library QUSRBRM before performing a merge operation when QUSRBRM is specified
for the to library.
Note: You must end all BRMS operations before performing a merge operation when QUSRBRM is
specified for the to library. The merge operation will fail if exclusive locks cannot be obtain ed for the
files in the to library.
to-library-name
Name of the library containing the BRMS database files which will receive the merge records.
Top
Target release (TGTRLS)
Specifies the target release for estimating the BRMS product update time. This is a required parameter
when *ESTPRDUPD is specified for the Option (OPTION) parameter.
*DEFAULT
Specifies the default action is to be used when estimating the BRMS product update time. The
default action assumes the target release is not available and a worst case update time is
returned. Use this value if a future version and release of the product is not available, or the
current version and release is no longer serviced and an available target release is not listed.
target-release
Specify the target release for the update in the format VxRxMx, where Vx is the version, Rx is the
release, and Mx is the modification level. For example, V5R4M0 is version 5, release 4,
modification level 0.
Top
Initialize BRMS (INZBRM) 95
Examples
Example 1: Initializing the BRMS Product
INZBRM OPTION(*RESET)
This command initializes BRMS resetting all values to the default value.
Example 2: Activating a System on the Network
INZBRM OPTION(*NETSYS) FROMSYS(MYNETID.MYSYSID)
This command activates system MYSYSID on network MYNETID into the BRMS network. The command
is run on system MYSYSID.
Example 3: Register All Functional Authorities
INZBRM OPTION(*SETAUT)
This command registers all policies and functions currently defined in BRMS to the i5/OS Registration
facility.
Example 4: Rename Media Information
INZBRM OPTION(*CHGSYSNAM) PRVSYSNAM(MYNETID.MYSYSID) NEWSYSNAM(*LCL)
This command renames all BRMS media information currently owned by system MYSYSID on network
MYNETID to the local network identified and default local location name as defined in the network
attributes.
Example 5: Merge BRMS Database Files
INZBRM OPTION(*MERGE) FROMLIB(QUSRBRMSAV) TOLIB(QUSRBRM) MERGE(*ALL)
This command merges the records found in the database files found in library QUSRBRMSAV with the
records found in library QUSRBRM.
Example 6: Estimate BRMS initialization
INZBRM OPTION(*ESTPRDINZ)
This command estimates the time required to initialize BRMS following installation of the product
primary language. The estimate is returned in message BRM402B.
Example 7: Run BRMS initialization
INZBRM OPTION(*RUNPRDINZ)
The user has received exception BRM40A2 trying to run BRMS operations. This command completes the
BRMS product initialization and allows for normal BRMS operations to continue.
Example 8: Estimate BRMS update time
INZBRM OPTION(*ESTPRDUPT) TGTRLS(VxRxMx)
Estimates the time to update the current version and release of BRMS to the version and release specified
by the VxRxMx value for the TGTRLS parameter.
Top
96 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Error messages
*ESCAPE Messages
BRM13FF
Merge operation not successful. Reason &5
BRM1521
Connection to system &1 could not be established.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A5
BRMS product initialization ended abnormally.
BRM40A6
BRMS product initialization already started.
BRM412B
Values not valid for parameters.
BRM6708
Command ended due to error.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Initialize BRMS (INZBRM) 97
98 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Initialize Media using BRM (INZMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Initialize Media using BRM (INZMEDBRM) command prepares media for use in the BRMS system.
This command is used to initialize a volume with a standard volume label for standard label magnetic
volume processing.
Note: It is recommended that you use the INZMEDBRM command in place of the i5/OS INZTAP
command. To assure the protection of media, BRMS disables INZTAP CHECK(*NO) for users who do not
have *SECADM, *SECOFR, *SERVICE or *SAVSYS authority. Unlike users of INZTAP, users of
INZMEDBRM do not need these levels of authority in order to use the CHECK(*NO) option.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
DEV Device Name Required,
Positional 1
NEWVOL New volume identifier Character value Required,
Positional 2
MEDCLS Media class Name Required,
Positional 3
NEWOWNID New owner identifier Character value, *BLANK Optional
VOL Volume identifier Character value, *MOUNTED Optional
CHECK Check for active files *YES, *FIRST, *NO Optional
CODE Code *EBCDIC, *ASCII Optional
ENDOPT End of tape option *REWIND, *UNLOAD Optional
© Copyright IBM Corp. 1998, 2006 99
Keyword Description Choices Notes
CLEAR Clear *NO, *YES Optional
Top
Device (DEV)
Specifies the name of the device which is used to initialize the volume. The device name must be defined
in the BRMS device table.
This is a required parameter.
Top
New volume identifier (NEWVOL)
Specifies the volume identifier for a volume being initialized for use as a BRMS volume.
New volume identifier is a required field.
new-volume-identifier
Specify the 6 character identifier of the new volume. The identifier must contain only
alphanumeric characters (A through Z and 0 through 9), and cannot have a prefix or be filled
with blanks.
This is a required parameter.
Top
Media class (MEDCLS)
The MEDCLS parameter defines the density used to format the volume. It does not define the media
class the volume is assigned. Use the CHGMEDBRM command to change the media class assignment of
the volume.
This is a required parameter.
Top
New owner identifier (NEWOWNID)
Specifies the volume owner’s identifier to write in the volume label of the volume being written.
*BLANK
The owner identification field is set to blanks.
new-owner-identifier
Specify no more than 14 characters to identify the owner of the volume. If fewer than 14
characters are specified, the field is left-justified and is filled with blanks on the right.
Top
100 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Volume identifier (VOL)
Specifies the existing volume identifier of the volume being initialized for use or indicates that the
volume currently on the magnetic device should be initialized for use.
*MOUNTED
Any labeled or unlabeled volume that is placed in the specified volume device is initialized for
use. To initialize a new or empty volume for use, *MOUNTED must be specified, and *NO must
be specified on the Check for active files (CHECK) parameter.
volume-identifier
Specify the identifier of the labeled volume being initialized for use. This parameter value can be
used only to initialize a volume for use that is already a labeled volume. If the volume on the
specified device has a different volume identifier than the one specified or if it is an unlabeled
volume, an error message is sent.
Top
Check for active files (CHECK)
Specifies whether a labeled volume should be checked for active data files before it is initialized for use.
If an unlabeled volume is placed in the specified device, this parameter is ignored.
*YES All data file labels on the volume are checked. If any active files are found, the operation is
ended and an error message is sent.
*FIRST
Only the first data file label on the volume is checked. If there are no data files on the volume or
if the first data file has expired, the volume is initialized for use without checking for any other
files on the volume. If the first data file has not expired, the operation is ended and an error
message is sent.
*NO Volume initialization continues with no checking for active files. To initialize a new or empty
volume for use, *NO must be specified here and *MOUNTED must be specified on the Volume
identifier (VOL) parameter.
Top
Code (CODE)
Specifies the character code in which the volume label is written. All data that is not save/restore data
written after the label must be in the same code; codes cannot be intermixed on a volume that is not a
save/restore volume.
*EBCDIC
The volume label is written in EBCDIC and is an IBM standard label; all additional data must
also be written in EBCDIC.
*ASCII
The volume label is written in ASCII and is an American National Standard Institute standard
label; all additional data must also be written in ASCII.
Top
End of tape option (ENDOPT)
Specifies whether the volume is only rewound, or rewound and unloaded after it has been initialized for
use.
Initialize Media using BRM (INZMEDBRM) 101
*REWIND
The volume is rewound after it has been initialized for use.
*UNLOAD
The volume is rewound and unloaded.
Top
Clear (CLEAR)
Specifies whether all labels and data are to be deleted from the volume when it is initialized for use. If
the volume must be cleared of all data, it is deleted from the location of the volume label or tape marks
to the end of the tape marker.
*NO The existing data is not deleted. Even though the existing data is not deleted, the data on the
volume is not usable after the volume has been initialized for use.
*YES After the beginning of the volume has been initialized for use, the remaining data on the volume
is deleted.
Top
Examples
Example 1: Initializing a Volume
INZMEDBRM DEV(TAP06) NEWVOL(T00004) MEDCLS(QIC1000)
This command initializes volume T00004 using device TAP06. The volume is assigned a media class of
QIC1000 and initialized using the density specified by the QIC1000 media class.
Top
Error messages
*ESCAPE Messages
BRM1317
Volume &1 cannot be initialized now.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
102 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Migrate using BRM (MGRBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Migrate using BRM (MGRBRM) command allows you to migrate a library or first level folder to a
specified auxiliary storage pool. This command is used by BRMS migration processing and by you to
request migration of a specific library or folder as needed. You can specify the auxiliary storage pool to
which you want to migrate the library or folder.
When the MGRBRM command is used BRMS ignores low storage threshold constraints for the auxiliary
storage pool from which the item is being moved, but does honor the target auxiliary storage pool’s high
storage threshold.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v The BRMS Advanced feature (Option 2) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
TOASP To asp Character value, *SYSTEM Required,
Positional 1
TYPE Type *LIB, *FLR Optional,
Positional 2
LIB Library Name Optional,
Positional 3
FLR Folder Name Optional
Top
To ASP (TOASP)
Specifies the auxiliary storage pool to which the specified library or first level folder is to be migrated.
*SYSTEM
The library or folder is to be migrated to the system (1) auxiliary storage pool.
ASP-name
Specify the name of the auxiliary storage pool to which the library or folder is to be migrated.
auxiliary storage pool names are assigned using the WRKASPBRM command.
ASP-number
Specify the number of the auxiliary storage pool to which the library or folder is to be migrated.
Note: UDFS, primary, secondary auxiliary storage pools are not supported for this parameter.
© Copyright IBM Corp. 1998, 2006 103
Top
Type (TYPE)
Specifies the type of item that you want to migrate. You can select a library or a first level folder.
*LIB The type of item that you want to migrate to another auxiliary storage pool is a library.
*FLR The type of item that you want to migrate to another auxiliary storage pool is a first level folder.
Top
Library (LIB)
Specifies the library name that you want to migrate to another auxiliary storage pool.
This is a required parameter with TYPE *LIB.
Top
Folder (FLR)
Specifies the folder name that you want to migrate to another auxiliary storage pool.
This is a required parameter with TYPE *FLR.
Top
Examples
Example 1: Migrating a Library
MGRBRM TOASP(COMPRESS) TYPE(*LIB) LIB(GLLIB)
This command migrates library GLLIB to the auxiliary storage pool (ASP) named COMPRESS.
Top
Error messages
*ESCAPE Messages
BRM1867
Error writing file &1.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1F24
Cannot migrate item &1, already in ASP &4.
BRM1F25
Cannot migrate item &1, objects in use.
104 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
BRM1F26
Cannot migrate item &1, not allowed.
BRM1F27
Operation not allowed, resources not available.
BRM1F34
Cannot migrate item &1, threshold too low.
BRM1F41
ASP &1 does not support migration
BRM1F42
ASP &1 not eligible for migration.
BRM1F44
ASP &1 does not support migration
BRM2112
ASP &2 not valid.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Migrate using BRM (MGRBRM) 105
106 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Monitor Save While Active (MONSWABRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Monitor Save While Active (MONSWABRM) command reviews the save while active message queue
and looks for the message indicating the end of library synchronization. When synchronization is
detected, you can issue a command to the system.
The MONSWABRM command can be used as an exit (*EXIT) special value in a control group during
backup processing.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
LIB Saved library Name, *MSGQ Required,
Positional 1
CMD Command to run Command string Required,
Positional 2
JOBD Job description Single values: *USRPRF
Other values: Qualified object name
Optional
Qualifier 1: Job description Name
Qualifier 2: Library Name, *LIBL, *CURLIB
JOBQ Job queue Single values: *JOBD
Other values: Qualified object name
Optional
Qualifier 1: Job queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
WAITMSG Time limit in seconds 1-999999, 3600, *NOMAX Optional
MSGQ Message queue Name Optional
Top
Saved library (LIB)
Specifies the name of the library or message queue that you want to review for synchronization during a
save while active operation.
This is a required parameter.
library-name
Specify the name of the library that you want to review for synchronization.
*MSGQ
When you specify *MSGQ, you must specify a message queue name in the Message queue
(MSGQ) parameter. The message queue name that you specify is reviewed for synchronization.
© Copyright IBM Corp. 1998, 2006 107
Top
Command to run (CMD)
Specifies the command that you want to process when library synchronization is achieved during a save
while active operation. For instance, you may want to restart a subsystem once synchronization has
occurred for the library you are saving.
Note: Effective use of MONSWABRM in a control group requires that you specify *YES for ″Save while
active″ in the control group entry for the monitored library, and that the *EXIT entry precedes the control
group entry for the monitored library.
This is a required parameter.
Top
Job description (JOBD)
Specifies the job description used with this job.
Single values
*USRPRF
The job description in the user profile under which the submitted job runs is used as the job
description of the submitted job.
Qualifier 1: Job description
name Specify the name of the job description used for the job.
Qualifier 2: Library
*LIBL The library list is used to locate the job description.
*CURLIB
The current library for the job is used to locate the job description. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job description is located.
Top
Job queue (JOBQ)
Specifies the job queue in which this job is placed. This job queue must be different from the job queue in
which the control group will run, so that the MONSWABRM command will run at the same time with
the control group.
Single values
*JOBD
The submitted job is placed on the job queue named in the specified job description.
Qualifier 1: Job queue
name Specify the name of the job queue on which the submitted job is placed.
108 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Qualifier 2: Library
*LIBL The library list is used to locate the job queue.
*CURLIB
The current library for the job is used to locate the job queue. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job queue is located.
Top
Time limit in seconds (WAITMSG)
Specifies the time in seconds that the MONSWABRM command should wait for the library
synchronization message in the job queue. If the specified time is exceeded, the MONSWABRM command
will stop monitoring the message queue. The time can be specified from 1 to 999999 seconds, with a
default time of 3600 seconds (1 hour).
3600 The default time limit is one hour.
*NOMAX
The program waits indefinitely for the arrival of the library synchronization message.
time-limit-in-seconds
Specify the time limit in seconds. The time can range from 1 to 999999 seconds.
Top
Message queue (MSGQ)
Specifies the name of the message queue that you want to review for synchronization. This parameter is
required when *MSGQ is specified in the Saved library (LIB) parameter.
Restriction:
v The message queue name specified must match the name used on the SWA Message Queue field on
the control group entries intended to be monitored, or the name specified in the Save active message
queue (SAVACTMSGQ) parameter specified in the BRMS save command(s) intended to be monitored.
MONSWABRM always uses the message queue from library QUSRBRM.
Top
Examples
Example 1: Processing a Command after Synchronization
MONSWABRM LIB(GLLIB) CMD(SBMJOB JOB(GLDAILY))
This command will submit the GLDAILY job when the synchronization message is sent during the save
of library GLLIB.
Top
Error messages
*ESCAPE Messages
Monitor Save While Active (MONSWABRM) 109
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
110 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Move Media using BRM (MOVMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Move Media using BRM (MOVMEDBRM) command moves media based on BRMS move policies.
Media that is moved as a result of processing this command must meet not only the move policy
requirements (for example, allowable move day) but also the criteria specified in the command for
location, media class, system name and so on.
The MOVMEDBRM command can be a job in the system scheduler that can run automatically or you can
submit the command manually.
The output produced when you run the MOVMEDBRM command is either the Volume Movement report
written to printer file QP1AVMS or the moved media records written to the output file.
Note: If you have a network of systems using BRMS, it is only necessary to process the MOVMEDBRM
command on one of the members of the network, although the process can be done an a system by
system basis.
Note: The system in the network that is running the movement for all of the other systems in the
network should be physically attached to all media libraries that support the network operations. If this
is not the case, you may have to run MOVMEDBRM again, specifying the appropriate move policy for
the logically attached media library device.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v When using special value *OUTFILE for the Output (OUTPUT) parameter, refer to section General
Rules for Object Authorities on Commands in Appendix D of the iSeries Security Reference book for
the authorities required for the output file and output file library.
Top
Parameters
Keyword Description Choices Notes
MOVPCY Move policy Name, *ALL Optional
LOC From location Name, *ALL, *HOME Optional
CNR Container Name, *ALL Optional
MEDCLS Media class Name, *ALL Optional
SYSNAME System name Character value, *ALL, *LCL Optional
FILEGRP File group Name, *ALL, *NONE, *ARCGRP, *BKUGRP, *SYSGRP,
*SYSTEM
Optional
GRPTYPE File group type Name, *ALL, *ARC, *BKU, *NONE Optional
OUTPUT Output *PRINT, *OUTFILE Optional
© Copyright IBM Corp. 1998, 2006 111
Keyword Description Choices Notes
OUTFILE File to receive output Qualified object name Optional
Qualifier 1: File to receive
output
Name
Qualifier 2: Library Name, *LIBL, *CURLIB
OUTMBR Output member options Element list Optional
Element 1: Member to
receive output
Name, *FIRST
Element 2: Replace or add
records
*REPLACE, *ADD
Top
Move policy (MOVPCY)
Specifies the user-defined name of a move policy that you want to use to select volumes.
*ALL All media that has a move policy are selected.
move-policy-name
Specify the user-defined name of the move policy that you are using to select media volumes.
Top
From location (LOC)
Specifies the location of the media that you want to use when selecting volumes to be moved.
*ALL Select media volumes that reside in any storage location.
*HOME
Select volumes that reside in the home location.
from-location-name
Specify the name of the media storage location.
Top
Container (CNR)
Specifies the container that you want to select for media movement. You can specify a container or all
containers.
*ALL Select all media for media movement that is currently in a container.
container-ID
Specify the name of the container that you want to select for media movement.
Top
Media class (MEDCLS)
Specifies the media class that you want to select for media movement. You can select a specific media
class or all media classes.
*ALL Select all media regardless of the media class.
112 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
media-class-name
Specify the name of the media class that you want to use to select volumes for media movement.
Top
System name (SYSNAME)
Specifies the system name whose media inventory you want to consider for media movement.
*ALL Include all media on all systems in the media selected for media movement.
*LCL Specifies that the system is the local system. BRMS uses the default local location name,
LCLLOCNAME and not the system name SYSNAME. In most cases, the systems have the same
value specified in the LCLLOCNAME and in the SYSNAME. You can use the DSPNETA
command to view the system network attributes.
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to use this value.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to use this value.
Top
File group (FILEGRP)
Specifies the file group that you want to use when selecting volumes that you want to move.
*ALL Include all file groups when selecting the media that you want to move.
*NONE
Do not include media in file groups.
*ARCGRP
Include media that contain the default archive control group in the group of files.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
Include media that contain the default backup user data control group in the group of files.
*SYSGRP
Include media that contain the default system data control group in the group of files.
*SYSTEM
Include media that contain the default backup entire system control group in the group of files.
file-group
Specify the name of the file group whose media you want to select for movement.
Top
Move Media using BRM (MOVMEDBRM) 113
File group type (GRPTYPE)
Specifies the type of file group that you want to select for movement.
*ALL Include all types of file groups that meet the other specifications in the search.
*ARC Include file groups that are archive type file groups in the media that you want to move.
Note: *ARC is not a special value, but rather indicates that this is an archive file group type.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU Include file groups that are backup type file groups in the media that you want to move.
Note: *BKU is not a special value, but rather indicates that this is a backup file group type.
*NONE
Do not include any file group types in the media that you want to move.
file-group-type
Specify the file group type that you want to include in the file groups that you want to move. An
example file group type is QBRMBKUP which indicates that it is a backup control group file
group type.
Top
Output (OUTPUT)
Specifies whether the output is to be printed with the job’s spooled output or directed to a database file.
*PRINT
The output is printed with the job’s spooled output.
*OUTFILE
The output is directed to the database file specified on the File to receive output (OUTFILE)
parameter.
Top
File to receive output (OUTFILE)
Specifies the qualified name of the database file receiving the output when *OUTFILE is specified on the
Output (OUTPUT) parameter. If the file does not exist, this command creates a database file in the
specified library. New files are created using database file QO1AVMS in library QBRM with the format
name QBRMMOVMED as the model.
Qualifier 1: File to receive output
database-file-name
Specifies the name of the database file receiving the output from the command. If this file does
not exist, it is created in the specified library.
Qualifier 2: Library
*LIBL
All libraries in the job’s library list are searched until the first match is found.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the current
library for the job, QGPL is used.
114 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
library-name
The specified library is used to locate the file.
Top
Output member options (OUTMBR)
Specifies the name of the database file member receiving the output of the command when *OUTFILE is
specified for the Output (OUTPUT) parameter.
Element 1: Member to receive output
*FIRST
The first member in the file receives the output. If OUTMBR(*FIRST) is specified and the member
does not exist, the member is created with the name of the file specified on the File to receive
output (OUTFILE) parameter and the record options.
member-name
Specifies the file member that receives the output. If OUTMBR(member-name) is specified and
the member does not exist, the member is created.
If the member exists, the user can add records to the end of the existing member or clear the
existing member and add the records.
Element 2: Replace or add records
*REPLACE
The existing records in the specified database file member are replaced by the new records.
*ADD The new records are added to the existing information in the specified database file member.
Top
Examples
Example 1: Selecting All Volumes to Move for Location *HOME
MOVMEDBRM LOC(*HOME)
This command selects all volumes for all move policies that are located at the location *HOME for media
movement. A summary of the movement activity is printed as file QP1AVMS.
Example 2: Selecting All Volumes to Move for Location *HOME
MOVMEDBRM LOC(*HOME) OUTPUT(*OUTFILE) OUTFILE(MYLIB/MOVEMENT)
This command selects all volumes for all move policies that are located at the location *HOME for media
movement. A summary of the movement activity is placed in the first member in data base file
MOVEMENT in library MYLIB.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
Move Media using BRM (MOVMEDBRM) 115
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
BRM6708
Command ended due to error.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
116 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Move Spooled Files using BRM (MOVSPLFBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Move Spooled Files using BRM (MOVSPLFBRM) command provides for the movement of selected
spooled files to a specified library-qualified output queue. Selection criteria includes library-qualified
from output queue name, from auxiliary storage pool, spooled file, job name, job user, job number, user
data, create date range, last used date range, and size range. A run option of *REPORT is provided to
allow the user to review the ″Move Spooled Files using BRM″ report prior to moving the selected
spooled files. The report, if printed, is written to printer file QP1AMSF.
Using the output queues’ spooled file auxiliary storage pool attribute, BRMS determines whether spooled
files will actually move from one auxiliary storage pool to another when moved from one output queue
to another. If a spooled file that moves from one outq to another does not move from one auxiliary
storage pool to another then BRMS does not check the auxiliary storage pool high storage threshold since
the spooled file does not move. If a spooled file that moves from one outq to another also moves from
one auxiliary storage pool to another, then before requesting the spooled file to move BRMS determines if
the target auxiliary storage pool has sufficient space to accommodate the spooled file without exceeding
the high storage threshold. If the spooled file cannot be moved without exceeding this threshold, BRMS
will show that the file was not moved, and the file will be included in the summary section detail which
indicates the number of files and amount of spooled data that could not be moved.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v The BRMS Advanced feature (Option 2) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
OPTION Option *REPORT, *MOVE Optional,
Positional 1
TOOUTQ To output queue Qualified object name Optional,
Positional 2 Qualifier 1: To output queue Name
Qualifier 2: Library Name
FROMOUTQ From output queue Qualified object name Optional,
Positional 3 Qualifier 1: From output
queue
Generic name, name, *ALL
Qualifier 2: Library Name, *ALL
FILE File Name, *ALL Optional,
Positional 4
JOB Job name Name, *ALL, * Optional
USER User Name, *ALL Optional
USRDTA User data Name, *ALL Optional
FROMASP From ASP Character value, *ALL, *SYSTEM Optional
© Copyright IBM Corp. 1998, 2006 117
Keyword Description Choices Notes
SLTCRTDATE Select create date Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SLTUSEDATE Select last used date Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SLTSIZE Select size Element list Optional
Element 1: Size type *KB, *MB, *GB, *PAGES
Element 2: Minimum size 0-999999, 0
Element 3: Maximum size 0-999999, *NOMAX
Top
Run option (OPTION)
Specifies whether you want to produce a report of spooled file candidates for movement or process a
move operation.
Note: You should always run a report of move candidates (*REPORT option) prior to processing the
move operation.
*REPORT
You want to produce the Move Spooled Files using BRM report. The report is written to printer
file QP1AHSF.
*MOVE
You want to process a move operation.
Top
To output queue (TOOUTQ)
Specifies the name of the library and output queue to which you want to move spooled files. The result
can be either a report or movement of spooled files to output queue from another output queue.
Qualifier 1: To output queue
to-output-queue-name
Specify the name of an output queue to which you want to move the spooled files.
Qualifier 2: Library
library-name
Specify the name of a library that contains the output queue.
Top
From output queue (FROMOUTQ)
Specifies the name of the library and output queue from which you want to move spooled files. A special
value of *ALL is provided to indicate that all output queues on the system are to be processed. If *ALL is
specified, no value can be specified for a library name. When *ALL is not specified for the From output
queue name, a library name must be specified to indicate which library contains the from output queue.
118 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
A special value of *ALL is supported for the From output queue library meaning all libraries in the
system, including QSYS, are searched. The result can be either a report or movement of spooled files
from an output queue to another output queue.
Qualifier 1: From output queue
*ALL Include all output queues in the report or move process. No value can be specified for library
when using the special value *ALL.
generic*-from-output-queue-name
Specify the generic name for the output queue. A generic name is a character string of one or
more characters followed by an asterisk (*): for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all output queues with names that begin with the
generic prefix, for which the user has authority. If an asterisk is not included with the generic
(prefix) name, the system assumes it to be the complete output queue name.
from-output-queue-name
Specify the name of an output queue that you want to include in the report or move process.
Qualifier 2: Library You must specify a library name or the special value *ALL when you specify the
from output queue name.
*ALL All libraries in the system including QSYS are searched.
library-name
Specify the name of a library that is to be searched for the spooled file.
Top
Select file (FILE)
Specifies which spooled files based on file names are to be moved.
*ALL Include all spooled files regardless of name in the report or move operation.
spooled-file-name
Specify the name of a spooled file that you want to include in the report or move operation.
Top
Select job name (JOB)
Specifies which spooled files, based on the name of the job that created them, are to be moved.
*ALL Include all spooled files, regardless of the job that created them, in the report or move operation.
* All spooled files for the jobs whose name matches the job running this command are selected.
job-name
Specify the name of a job whose spooled files are to be included in the report or move operation.
Top
Select user (USER)
Specifies which spooled files based on the name of the user that created them are to be included in the
report or move operation.
*ALL Include spooled files for all users in the report or move operation.
Move Spooled Files using BRM (MOVSPLFBRM) 119
user-name
Specify the name of a user whose spooled files are to be included in the report or move
operation.
Top
Select user data (USRDTA)
Specifies which spooled files, based on the associated user data tag, are to be included in the report or
move operation.
*ALL Include spooled files with any data tag in the report or move operation.
user-data
Specify the user data that you want to include in the report or move operation.
Top
From ASP (FROMASP)
Restricts spool file search to include only data from output queues contained in libraries residing in the
specified auxiliary storage pool.
*ALL Include all auxiliary storage pools in the report or move operation.
*SYSTEM
Include only the system (1) auxiliary storage pool in the report or move operation.
from-ASP-name
Specify the name of an auxiliary storage pool that you want to include in the report or move
operation.
from-ASP-number
Specify the number of an auxiliary storage pool that you want to include in the report or move
operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Select create date (SLTCRTDATE)
Specifies a range of creation dates that you want to use when reporting or moving spooled files. The
From date is the beginning of a date range and the To date is the end of the date range. Only spooled
files that were created on or after the From date and on or before the To date are included in the selected
spooled files.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
120 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*BEGIN
The earliest creation date is the beginning date of a date range.
*CURRENT
The current date is the beginning date of a date range.
from-create-date
Specify the date in job date format with or without date separators that you want to be the
beginning date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END The last date found is the end of the date range for the search.
*CURRENT
The current date is the ending date of the date range.
to-create-date
Specify the date in job date format with or without date separators that you want to be the
ending date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Select last used date (SLTUSEDATE)
Specifies a range of last used dates that you want to use when reporting or moving spooled files. The
From date is the beginning of a date range and the To date is the end of the date range. Only spooled
files that were last used on or after the From date and on or before the To date are included in the
selected spooled files.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
The earliest last used date is the beginning date of a date range.
*CURRENT
The current date is the beginning date of a date range.
from-use-date
Specify the date in job date format with or without date separators that you want to be the
beginning date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Move Spooled Files using BRM (MOVSPLFBRM) 121
Element 2: To date
*END The last date found is the end of the date range for the search.
*CURRENT
The current date is the ending date of the date range.
to-use-date
Specify the date in job date format with or without date separators that you want to be the
ending date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Select size (SLTSIZE)
Specifies the size of spooled files that are to be included in the report or move operation. Three positional
values can be be specified to select the files. Only files that are larger in size than the Minimum size or
smaller in size than the Maximum size are selected.
Element 1: Size type
*KB The spooled file size is specified in kilobytes.
*MB The spooled file size is specified in megabytes.
*GB The spooled file size is specified in gigabytes.
*PAGES
The spooled file size is specified in pages.
Element 2: Minimum size
0 Spooled files with a size that is greater than zero are included.
minimum-size
Specify the size that a spooled file must equal or exceed to be included in the report or move
operation. The spooled file size can range from 0 to 999,999 and is used with the Size type and
Maximum size values to determine which files to include.
Element 3: Maximum size
*NOMAX
All spooled are included that are greater than or equal to the value specified in the Minimum
size parmameter.
maximum-size
Specify the size that a spooled file must not exceed to be included in the report or move
operation. To be included in the selection, the specified size must also be equal to or greater than
the minimum size specification and less than or equal to the specified size. The spooled file size
can range from 1 to 999,999 and is used with the Size type value to determine which files to
include.
Top
Examples
Example 1: Move Large Spooled Files in System ASP
122 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
MOVSPLFBRM OPTION(*MOVE) TOOUTQ(MYLIB/MYOUTQ)
FROMASP(*SYSTEM) SLTSIZE(*MB 50 *NOMAX)
This command moves all spooled files currently in the system ASP that are fifty or more megabytes in
size to the output queue named MYOUTQ in the library named MYLIB. This example assumes MYLIB is
not in the system ASP, and the ASP attribute of the spooled file for the MYOUTQ output queue specifies
that spooled files are placed in the same ASP as the output queue.
Top
Error messages
*ESCAPE Messages
BRM1131
Library &1 not found or not available.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1F18
No output queues were found meeting selection criteria.
BRM2112
ASP &2 not valid.
BRM1F27
Operation not allowed, resources not available.
BRM1F28
Migration not performed.
BRM2112
ASP &2 not valid.
BRM2270
Output queue &2 in library &3 cannot be used for migration.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Move Spooled Files using BRM (MOVSPLFBRM) 123
124 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Print Labels using BRM (PRTLBLBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Print Labels using BRM (PRTLBLBRM) command prints media labels that you have selected as a
result of media processing. Label information includes:
v Volume serial identifier
v Creation date
v Expiration date
v Location
v Container identifier
Note: If you change the printer file description, you should keep a copy. Any release upgrade may cause
the printer files to change and your version may be back level.
Note: The source for the printer files is located in QUSRBRM/QA1ASRC. There are three printer files,
QP1A1LP, QP1A2LP and QP1A3LP. These correspond to 6 lines per inch, 8 lines per inch and 9 lines per
inch.
To change the format of the printer labels, edit the source member corresponding to the labels you
selected for the media. Editing can be done with an editor (for example Source Entry Utility (SEU)), but
you must first give the members the correct member type of PRTF. You can do this through PDM when
you are working with members. When changing the source, do not change the record name or any of the
field names. The print programs depend on these named items being present. You can change the
position. When you compile the printer file, be sure and specify level check (*NO) on the CRTPRTF
command.
There are no parameters for this command.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
None
Top
Examples
PRTLBLBRM
This command prints the media labels.
Top
© Copyright IBM Corp. 1998, 2006 125
Error messages
*ESCAPE Messages
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
126 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Print Media Exceptions for BRM (PRTMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Print Media Exceptions for BRM (PRTMEDBRM) command provides information about volumes in
the BRMS media inventory that have exceeded use thresholds, number of reads or writes and so on that
are specified in the media class for the volume.
Based on that information, you can make decisions about the reported volumes. You can specify all
volumes including exceptions or just volumes that are exceptions.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type *THRESHOLD, *STATISTICS Optional,
Positional 1
VOL Volumes to list *ALL, *EXCP Optional
Top
Type (TYPE)
Specifies the type of report that you want BRMS to print.
*THRESHOLD
The Media Volume Threshold Information report includes volumes that have equaled or exceeded
the usage or read/write threshold limits set by the Work with Media Classes display. The report,
if printed, is written to printer file QP1AVOL.
*STATISTICS
All other volume related statistics including media life, uses before cleaning and so on are
reported compared against values set by the Work with Media Classes display. The report is the
Media Volume Statistics report. The report, if printed is written to the printer file QP1AVU.
Top
Volumes to list (VOL)
Specifies whether you want to list all volumes in the report including exceptions or only exceptions.
*ALL The report includes all volumes including exceptions.
*EXCP
Only exception volumes are to be included in the report.
© Copyright IBM Corp. 1998, 2006 127
Top
Examples
None
Top
Error messages
*ESCAPE Messages
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
128 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Print Media Movement (PRTMOVBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Print Media Movement (PRTMOVBRM) command prints the Media Movement report based on a
specified date range, type of move that you request, locations and so on. The report shows all the
volumes that have moved (or in the case of *NEXT, which volumes will move to a new location), the
from and to locations, the move policy for each volume and the move date. The report, if printed, is
written to printer file QP1APVMS.
The Media Movement report can be used to report volumes that have already moved or can be used to
report the next scheduled media movement for a volume. Reporting of next scheduled move is
performed by selecting the *NEXT variable for the Type parameter.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *CURRENT, *END
TYPE Type *ALL, *NEXT, *NOTVFY, *VFY Optional
LOC From location Name, *ALL, *HOME Optional
Top
Select dates (SLTDATE)
Specifies a range of dates that you want to use when printing the Media Movement report. The From
date is the beginning of a date range of media movement and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
Uses the earliest activity date for the beginning date of the date range.
© Copyright IBM Corp. 1998, 2006 129
*CURRENT
Use the current date for the beginning date of the date range.
from-date
Specify the date entered in job date format with or without date separators for the beginning date
of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Note: If you specify *NEXT in the Type (TYPE) parameter, the number of days after the current
date is used to determine the startingdate of the date range.
Element 2: To date
*CURRENT
Uses the current date for the ending date of the date range.
*END The last date that a media moves is the ending date of the date range that you want to use for
the search.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Note: If you specify *NEXT in the Type (TYPE) parameter, the number of days after the current
date is used to determine the ending date of the date range.
Top
Type (TYPE)
Specifies the type of media movement activity that you want to include in the report.
*ALL Includes all volumes that have ever been moved and shows the most recent media movement
associated with each volume.
*NEXT
Produces the Media Movement report for the next location that media will move to rather than
completed moves. The *NEXT option will include all media movement to the next location.
Ending dates should be future dates to assure that report results are meaningful for the date
range selected.
*NOTVFY
Includes only media waiting to be verified in the report for the date range selected.
*VFY Includes only verified media movement in the report for the date range selected. After this option
has been used to report on media, the volumes that were selected in the specified date range do
not appear in the report the next time the report is processed.
Top
From location (LOC)
Specifies whether you want the Media Movement report to include a single location or all locations.
130 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*ALL Includes all locations in the Media Movement report. Each from and to location movement that is
reported will cause a page break, such as From Vault to *HOME would be one part of the report
and *HOME to vault would page break and begin a new part of the report.
*HOME
You want to include the home location (*HOME) in the Media Movement report.
from-location-name
Specify the name of the location that you want to include in the Media Movement report.
Top
Examples
Example 1: Printing the Media Movement Report
PRTMOVBRM TYPE(*VFY) LOC(*HOME)
This command prints a report that includes media entries that have been verified (*VFY) and that are
moving from the home location (*HOME).
Top
Error messages
*ESCAPE Messages
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Print Media Movement (PRTMOVBRM) 131
132 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Remove Log Entries from BRM (RMVLOGEBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Remove Log Entries from BRM (RMVLOGEBRM) command clears the BRMS log based on a type of
entry and a date range that you specify.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type *ALL, *ARC, *BKU, *MAINT, *MED, *MGR, *RCY, *RTV,
*SEC
Optional,
Positional 1
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *CURRENT, *BEGIN
Element 2: To date Character value, *CURRENT
Top
Type (TYPE)
Specifies the type of entries that you want to clear from the BRMS log. Examples of types of entries are
backup, archive and so on.
Note: The default for the TYPE parameter depends on the area of BRMS that you use to access this
command. For instance, if you access this command from a backup menu, the default Type is *BKU. If
you access the command from the archive menu, the default Type is *ARC and so on. If you type the
command on a command line or from the System Policy display, the default is *ALL.
*ALL Selects all log entries to clear within the specified date range.
*ARC Selects only archive log entries to clear within the specified date range.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU Selects only back up log entries to clear within the specified date range.
*MAINT
Selects only maintenance log entries to clear within the specified date range.
*MED Selects only media management log entries to clear within the specified date range.
*MGR Selects only migration log entries to clear within the specified date range.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*RCY Selects only recovery log entries to clear within the specified date range.
*RTV Selects only retrieve log entries to clear within the specified date range.
© Copyright IBM Corp. 1998, 2006 133
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*SEC Selects only security log entries to remove within the specified date range. Only log entries whose
primary area are security will be removed. An entry may be logged for any reason and have
security as a secondary area.
Top
Select date (SLTDATE)
Specifies a range of dates that you want to use when selecting entries to remove from the BRMS log. The
From date is the beginning point in the date range and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*CURRENT
The current date is the starting point of the range of dates used to remove entries from the BRMS
history log.
*BEGIN
The earliest log entry in the BRMS log is the beginning date of the date range.
from-date
Specify the date entered in job date format with or without date separators that you want to be
the beginning date of the date range.
number-of-days
Specify the number of days before the current day that is the beginning date of the date range.
Element 2: To date
*CURRENT
The current date is the ending date of the date range.
*END The last date in the log is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of the date range.
number-of-days
Specify the number of days before the current day that is the ending date of the date range.
Top
Examples
Example 1: Removing Entries from the BRMS Log Based on a Date Range
RMVLOGEBRM SLTDATE(’1/1/03’ ’4/01/03’)
This command removes all log entries from January 1, 2003 to April 1, 2003 from the log.
134 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Remove Log Entries from BRM (RMVLOGEBRM) 135
136 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Remove Media Volumes from BRM (RMVMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Remove Media Volumes from BRM (RMVMEDBRM) command removes a media volume from the
BRMS media inventory. A volume is removed because of age, error rate, shipment to another location,
and so on.
Note: Media can only be removed if it was previously added using the ADDMEDBRM command. All
information about the volume including content and statistics, is deleted when the volume is removed.
Also the total number of volumes in BRMS is decremented.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
VOL Volume identifier Character value Required,
Positional 1
Top
Volume identifier (VOL)
Specifies the volume identifier of the volume being removed from the BRMS media inventory.
This is a required parameter.
volume-identifier
Specify the identifier of the volume being removed from the media inventory. The volume
identifier is a maximum of six characters in length.
Top
Examples
Example 1: Removing a Volume from BRMS
RMVMEDBRM VOL(C00005)
This command removes volume C00005 from the BRMS media inventory.
Top
© Copyright IBM Corp. 1998, 2006 137
Error messages
*ESCAPE Messages
BRM1147
Volume &1 not found.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
138 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Remove Media Info from BRM (RMVMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Remove Media Information from BRM (RMVMEDIBRM) command is used to specify when to
remove records from the BRMS media content information and how long to keep object detail. The
Media contents (MEDCON) parameter indicates whether records are to be removed when they expire or
when the expired volume is re-used. The Object level detail (OBJDTL) parameter indicates when the
object level detail is to be removed. You can remove object level detail at the same time you remove
record level information or you can specify a number of days to keep object information.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
MEDCON Media contents *EXP, *REUSE Optional
OBJDTL Object level detail 1-9999, *MEDCON Optional
Top
Media contents (MEDCON)
Specifies whether records are removed when media expires or when the media is re-used.
*EXP All BRMS media content information entries that have an Expiration date that are equal to or less
than the current date are removed from the media content information.
*REUSE
Media content information entries associated with a media volume are not removed from the file
until the volume is re-used, even though the volume has already expired.
Top
Object detail (OBJDTL)
Specifies when you want to remove object level detail for media records in the media content
information.
*MEDCON
The object level detail information is removed based on the value specified in the Media contents
(MEDCON) parameter.
number-of-days
Specify the number of days that object detail for an entry is kept on the file. If this number of
days is greater than the number of days implied in the Media contents (MEDCON) parameter,
such as the volume expires in 60 days and you specify 90 days in the Object level detail
© Copyright IBM Corp. 1998, 2006 139
(OBJDTL) parameter, the parameter has no meaning since the contents record has already been
removed. However, if you specify 45 days and the object expires in 60 days, the object level detail
is removed after 45 days and the accompanying contents record is removed after 60 days.
Top
Examples
Example 1: Removing Media Information from BRMS
RMVMEDIBRM MEDCON(*REUSE) OBJDTL(45)
This command allows you to remove BRMS media contents information. In the example, media contents
information remains on the BRMS media contents file until the media is reused and accompanying object
detail is removed after 45 days.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
140 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Resume Retrieve using BRM (RSMRTVBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
You can resume delayed retrieve operations for libraries, documents and bytestream files, including those
held due to lack of disk space. The Resume Retrieve using BRM (RSMRTVBRM) command attempts to
retrieve items from tape.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The BRMS Advanced feature (Option 2) is required to use this command.
2. *ALLOBJ special authority is required to use any value other than *NONE for the ALWOBJDIF
parameter.
3. You can select only one virtual tape device for serial retrieve operations. In addition, only one
*MEDCLS can be specified when using media classes which specify a virtual tape device density.
Top
Parameters
Keyword Description Choices Notes
HDLOBJ Retrieve select *ALL, *DELAY, *SECURITY, *STORAGE Optional,
Positional 1
ACTION Action *RETRIEVE, *REPORT Optional,
Positional 2
CFMRTV Confirm retrieval *YES, *NO Optional,
Positional 3
ASP Auxiliary storage pool Character value, *ALL, *SYSTEM Optional,
Positional 4
TYPE Item type *LIB, *FLR, *LNK Optional
SAVLIB Library Name, *ALL Optional
DEV Retrieve device Single values: *RTVPCY
Other values (up to 4 repetitions): Name, *MEDCLS
Optional
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *SAV, *AVAIL, *NONE
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
ENDOPT End of tape option *RTVPCY, *LEAVE, *REWIND, *UNLOAD Optional
RSTOPT Option *RTVPCY, *ALL, *FREE, *NEW, *OLD Optional
ALWOBJDIF Allow object differences Single values: *RTVPCY, *ALL, *NONE
Other values (up to 4 repetitions): *AUTL, *FILELVL,
*OWNER, *PGP
Optional
Top
© Copyright IBM Corp. 1998, 2006 141
Retrieve select (HDLOBJ)
Specifies the type of held items that you want to retrieve when you process the command. You can
specify a type of held object such as an item that was not retrieved due to lack of storage space on the
disk unit or you can specify all held items.
*ALL Attempts to retrieve all items that have been held during a previous retrieve process.
*DELAY
Attempts resume delayed retrieve operations.
*SECURITY
Attempts to retrieve items that were held due to insufficient security during a previous retrieve
request.
*STORAGE
Attempts to retrieve items that were held due to insufficient disk unit space in a previous retrieve
request.
Top
Action (ACTION)
Specifies whether you want to create a report or perform an actual retrieve.
*RETRIEVE
You want to retrieve the requested items from the BRMS media content information.
*REPORT
You want to create the Retrieve Report. This will allow you to review what will be retrieved prior
to retrieving the selected items. The report, if printed, is written to printer file QP1ASX.
Top
Confirm retrieve (CFMRTV)
Specifies whether items that are selected for retrieve are displayed on the Confirm Retrieve display prior
to retrieve.
Note: This parameter is ignored in batch.
*YES The Confirm Retrieve display is shown before the retrieve begins.
*NO The Confirm Retrieve display is not shown before the retrieve begins.
Top
Auxiliary storage pool (ASP)
Specifies the auxiliary storage pool into which you want to retrieve items.
*ALL You want to retrieve items into all auxiliary storage pools.
*SYSTEM
You want to retrieve items into the system (1) auxiliary storage pool.
ASP-number
Specify the number of the system (1) or basic user auxiliary storage pool (2-32) into which you
want to retrieve items.
142 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
ASP-name
Specify the auxiliary storage pool name into which you want to retrieve items.
Restriction:
v The auxiliary storage pool specified for retrieval must be valid for the Item Type specified.
Top
Item type (TYPE)
Specifies which type of item is displayed on the Confirm Retrieve display prior to retrieve operations.
*LIB Retrieve information for libraries is to be included.
*FLR Retrieve information for folders is to be included.
*LNK Retrieve information for bytestream files is to be included.
Top
Library (SAVLIB)
Specifies the library into which you want to retrieve items.
*ALL Items are retrieved to their original library.
library-name
Specify the name of the library into which items are retrieved.
Top
Retrieve device (DEV)
Specify the device name that is to be used in the retrieve process. You must use a single device for
retrieve processing.
Single values
*RTVPCY
The retrieve device specified in the BRMS retrieve policy is used.
Other values (up to 4 repetitions)
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined, a device that supports that media class is selected to retrieve the
requested save item or items.
device-name
Specify the name of the device that is used as the default retrieve device in retrieve processing.
Top
Resume Retrieve using BRM (RSMRTVBRM) 143
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a restore operation.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel restore.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
Note: Transferring save files to tape does not support parallel operations.
*SAV Specifies that the same number of device resources used for the save will be used for the restore.
If the save was a serial save, then the restore will also be serial.
*AVAIL
Use any available devices up to the maximum specified. Specifying this value for the minimum
will allow BRMS to use any available resources, but will complete using one resource if only one
is available at the start of the command.
*NONE
No device resources are to be used. The restore will be performed as a serial restore.
1-32 Specify the minimum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Element 2: Maximum Resources
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices. Specifying this value for the maximum will allow BRMS to use any
available resources but at a minimum use the value specified in the minimum element.
1-32 Specify the maximum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*RTVPCY
The value specified in the BRMS retrieve policy is the value that is used.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
144 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*REWIND
The volume is automatically rewound but not unloaded after the recovery operation ends.
*UNLOAD
The volume is automatically rewound and unloaded after the recovery operation ends.
Top
Option (RSTOPT)
Specifies which items are retrieved, depending on whether the items exist in the library on the system.
*RTVPCY
The value from the BRMS retrieve policy is used.
*ALL All the items in the saved library are retrieved to the library. Old items on volume or in a save
file replace the current versions in the library on the system. Items not having a current version
are added to the library on the system. Items presently in the library, but not on the media,
remain in the library.
*FREE The saved items are retrieved only if they exist in the system library with their space freed. The
saved version of each item is retrieved in the system in its previously freed space. This option
retrieves items that had their space freed when they were saved. If any saved items are no longer
part of the current version of the library, or if the space is not free for any item, the item is not
retrieved. The retrieve operation continues, and all of the freed items are retrieved.
*NEW Only the items in the saved library that do not exist in the current version of the library on the
system are added to the library. Only items not known to the library on the system are retrieved;
known items are not retrieved. This option retrieves items that were deleted after they were
saved or that are new to this library. If any saved items have a version already in the library on
the system, they are not retrieved, and an informational message is sent for each one, but the
retrieve operation continues.
*OLD Only the items in the library having a saved version are retrieved; that is, the version of each
item currently in the library is replaced by the saved version. Only items known to the library are
retrieved. If any saved items are no longer part of the online version of the library, they are not
added to the library; an informational message is sent for each one, but the retrieve continues.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects. These
differences include:
v Authorization list: The authorization list of an object on the system is different than the authorization
list of an object from the save operation. Or the system on which a new object with an authorization
list is being restored is different from the system on which it was saved.
v File level identifier: The creation date and time of the database file on the system does not match the
creation date and time of the file that was saved.
v Member level identifier: The creation date and time of the database file member on the system does
not match the creation date and time of the member that was saved.
v Ownership: The owner of an object on the system is different than the owner of an object from the
save operation.
v Primary Group: The primary group of an object on the system is different than the primary group of
an object from the save operation.
Note: To use this parameter, you need *ALLOBJ special authority.
Resume Retrieve using BRM (RSMRTVBRM) 145
Single values
*RTVPCY
The value from the retrieve policy is used for this value.
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Note: If restoring objects that were saved with SAVOBJ or SAVCHGOBJ, BRMS will change the
parameter to ALWOBJDIF(*FILELVL *AUTL *OWNER *PGP) for these objects to prevent the
renaming.
*NONE
None of the differences listed above are allowed on the restore operation. See the description of
each individual value to determine how differences are handled.
Other values (up to 4 repetitions)
*AUTL
Authorization list differences are allowed.
If an object already exists on the system with a different authorization list than the saved object,
the object is restored with the authorization list of the object on the system. New objects that are
being restored to a system that is different from which they were saved are restored and linked to
their authorization list. If the authorization list does not exist on the new system, the public
authority is set to *EXCLUDE.
If this value is not specified, authorization list differences are not allowed. If an object already
exists on the system with a different authorization list than the saved object, the object is not
restored. New objects that are being restored to a system that is different from which they were
saved are restored, but they are not linked to the authorization list, and the public authority is set
to *EXCLUDE.
*FILELVL
File level identifier and member level identifier differences are allowed.
An attempt will be made to restore existing physical files even though the physical file on the
save media may have a different file level identifier or member level identifier than the physical
file on the system. The physical file data will only be restored for those physical files whose
format level identifiers on the save media match the format level identifiers of the corresponding
physical file on the system.
If this value is not specified, file level identifier and member level identifier differences are not
allowed. If an object already exists on the system with a different file level identifier or member
level identifier than the saved object, the object is not restored.
*OWNER
Ownership differences are allowed.
If an object already exists on the system with a different owner than the saved object, the object is
restored with the owner of the object on the system.
If this value is not specified, ownership differences are not allowed. If an object already exists on
the system with a different owner than the saved object, the object is not restored.
*PGP Primary group differences are allowed.
146 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If an object already exists on the system with a different primary group than the saved object, the
object is restored with the primary group of the object on the system.
If this value is not specified, primary group differences are not allowed. If an object already exists
on the system with a different primary group than the saved object, the object is not restored.
Top
Examples
Example 1: Resuming a Retrieve for Security Items
RSMRTVBRM HDLOBJ(*SECURITY)
This command resumes the retrieve operation for items that were held due to lack of authorization.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2112
ASP &2 not valid.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Resume Retrieve using BRM (RSMRTVBRM) 147
148 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Restore Authority using BRM (RSTAUTBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Restore Authority using BRM (RSTAUTBRM) command reestablishes the object owner, primary
group and authorization list names for objects on basic user auxiliary storage pools (2-32) if this
information was saved.
This information is saved unless it was explicitly omitted from the save by specifying *USRASPAUT as
the omit for either a *SAVSYS or *SECDTA entry in the backup policy omit list.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The user profiles must be restored before using the RSTAUTBRM command.
2. The libraries and objects on the saved user auxiliary storage pools must be restored before using the
RSTAUTBRM command.
3. This command does not replace the i5/OS RSTAUT command. RSTAUTBRM is used in addition to
the RSTAUT command when restoring the authority information of saved user auxiliary storage pool
objects during a system recovery.
Top
Parameters
Keyword Description Choices Notes
USRASP Auxiliary storage pool Values (up to 31 repetitions): Character value, *ALLUSR Optional,
Positional 1
Top
ASPs to restore (USRASP)
Specifies the basic user auxiliary storage pools (2-32) for which saved authority information is to be
restored.
The libraries and objects must be restored to the basic user auxiliary storage pools before using the
RSTAUTBRM command.
Note: A maximum of 31 values may be specified.
*ALLUSR
Saved authorization information is to be restored for objects that reside in all basic user auxiliary
storage pools (2-32).
auxiliary-storage-pool-number
Specifies the number identifying a basic user auxiliary storage pool containing the objects for
which saved authority information is restored.
© Copyright IBM Corp. 1998, 2006 149
auxiliary-storage-pool-name
Specifies the name identifying the basic user auxiliary storage pool containing the objects for
which saved authority information is restored.
Top
Examples
Example 1: Restoring Saved Authority Information for All ASPs
RSTAUTBRM
-orRSTAUTBRM USRASP(*ALLUSR)
This command restores the owner profile, primary group, and authorization list names for objects
contained in all basic user auxiliary storage pools (ASPs 2-32).
Example 2: Restoring Saved Authority Information for ASPs 2 and 3
RSTAUTBRM USRASP(2 3)
This command restores the owner profile, primary group, and authorization list names for objects
contained in basic user auxiliary storage pools 2 and 3.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
150 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Restore Object using BRM (RSTBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Restore Object using BRM (RSTBRM) command restores a copy of one or more objects that can be
used in the integrated file system.
For more information about integrated file system commands, see the Integrated File System Introduction
book.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. For detailed restrictions on using this command to restore objects by using name patterns in the root
directory, to restore objects in libraries, or to restore document library objects, see the Restore Object
(RST) command in the Backup and Recovery book.
2. The RSTBRM command does not support optical files.
3. You must have authority to use the Restore Object (RST) command.
4. You must have save system (*SAVSYS) special authority, or have all of the following object authorities:
v You must have *W and *OBJEXIST authority to restore a file if it already exists on the system.
v You must have *WX authority to the parent directory.
v You must have *ADD authority to the owning user profile of the directory into which the parent
directories are created.
v You must have *ALLOBJ special authority to create parent directories with a user profile other than
your own.
5. You must have *ALLOBJ special authority to use any value other than *NONE for the ALWOBJDIF
parameter.
6. You can restore data from a TSM server device by using this command. You can only specify one
TSM device or *MEDCLS, which must select a TSM device. The TSM device selected can either be
*APPC, which supports the SNA network protocol, or *NET, which supports the TCP/IP protocol.
7. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
© Copyright IBM Corp. 1998, 2006 151
Parameters
Keyword Description Choices Notes
DEV Device Values (up to 4 repetitions): Name, *MEDCLS Required,
Positional 1
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *SAV, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
OBJ Objects Values (up to 300 repetitions): Element list Optional,
Positional 2 Element 1: Name Path name, *
Element 2: Include or omit *INCLUDE, *OMIT
Element 3: New object name Path name, *SAME
SUBTREE Directory subtree *ALL, *DIR, *NONE, *OBJ Optional
SAVLVL Save level 1-99, *CURRENT Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
OPTION Option *ALL, *NEW, *OLD Optional
ALWOBJDIF Allow object differences Single values: *NONE, *ALL
Other values (up to 2 repetitions): *AUTL, *OWNER,
*PGP
Optional
OBJID Object ID *SAVED, *SYS Optional
CRTPRNDIR Create parent directories *NO, *YES Optional
PRNDIROWN Parent directory owner Name, *PARENT Optional
FROMSYS From system Character value, *LCL Optional
Top
Device (DEV)
Specifies the device name or a specific media class that is to be used to restore the object. You must use a
single device for recovery processing.
You can restore data from a TSM (ADSM) server using this command. You can only specify one TSM
type server or *MEDCLS, which must select a TSM server. The device selected can either be *APPC,
which supports SNA network protocol, or *NET, which supports TCPIP protocol.
This is a required parameter.
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined, a device supporting that media class is selected to restore the
requested object or objects.
device-name
Specify the name of the device that you want to use to restore the selected object or objects.
Top
152 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a restore operation.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel restore.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
Note: Transferring save files to tape does not support parallel operations.
*SAV Specifies that the same number of device resources used for the save will be used for the restore.
If the save was a serial save, then the restore will also be serial.
*AVAIL
Use any available devices up to the maximum specified. Specifying this value for the minimum
will allow BRMS to use any available resources, but will complete using one resource if only one
is available at the start of the command.
*NONE
No device resources are to be used. The restore will be performed as a serial restore.
1-32 Specify the minimum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Element 2: Maximum Resources
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices. Specifying this value for the maximum will allow BRMS to use any
available resources but at a minimum use the value specified in the minimum element.
1-32 Specify the maximum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Top
Objects (OBJ)
Specifies the objects that you want to include or exclude from a list of objects you want to restore. A
maximum of 300 object name patterns can be specified.
For more information on specifying path names, refer to Chapter 2 of the Command Language Reference
book.
Additional information about object name patterns is in the Integrated File System Introduction book.
The first element specifies the path names of the objects saved on the media. Directory abbreviations (for
example, the current directory) are expanded with their current values, not the values they had at the
time of the save operation.
Element 1: Name
object-path-name-pattern
Specify an object path name or a pattern that can match many names.
Restore Object using BRM (RSTBRM) 153
Element 2: Include or omit
The second part specifies whether names that match the pattern should be included or omitted from the
operation. Note that in determining whether a name matches a pattern, relative name patterns are always
treated as relative to the current working directory. The SUBTREE parameter determines whether the
subtrees are included or omitted.
*INCLUDE
Objects that match the object name pattern are to be restored, unless overridden by an *OMIT
specification.
*OMIT
Objects matching the object name pattern are not to be restored. This overrides a *INCLUDE
specification and is intended to be used to omit a subset of a previously selected pattern.
Element 3: New object name
The third element specifies the new path name of the object.
*SAME
The objects are to be restored with the same names they had when they were saved.
new-path-name
Specify the path name with which to restore the object. If a pattern is specified in the first
element, the new path name must be the directory into which to restore any objects that match
the pattern. If an object name is specified in element 1, each component in the new path must
exist with the exception of the last component. If the object described in the last component
doesn’t exist, it will be restored as new.
Top
Directory subtree (SUBTREE)
Specifies whether directory subtrees are included in the restore operation.
*ALL The entire subtree for each directory that matches the object name pattern is included. The
subtree includes all subdirectories and the objects within those subdirectories.
*DIR Objects in the first level of each directory that matches the object name pattern are included. The
subdirectories of each matching directory are included, but the objects in the subdirectories are
not included.
*NONE
No subtrees are included in the restore operation. If a directory matches the object name pattern
specified, the objects in the directory are included. If the directory has subdirectories, neither the
subdirectories nor the objects in the subdirectories are included.
*OBJ Only the objects that exactly match the object name pattern will be processed. If the object name
pattern specifies a directory, objects in the directory are not included.
Top
Save level (SAVLVL)
Specifies the copy of the object that you want to restore from the media content information.
*CURRENT
The most current copy of the object is restored.
154 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
save-level-number
Specify the age of the copy that you want to restore from the media content information. You can
specify a copy number from 1 - 99. For instance, if you want to restore the next to the last most
recent copy specify 1.
Top
End of tape option (ENDOPT)
Specifies, when volume is used, what positioning operation is automatically done on the volume after the
restore operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound but not unloaded after the recovery operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the recovery operation ends.
Top
Option (OPTION)
Specifies how to handle restoring each object.
*ALL All the objects are restored to the system. Saved objects replace the objects on the system. Saved
objects not on the system are added to the system. Objects in the system library but not in the
saved library remain in the library.
*NEW Only the objects that do not exist on the system are restored.
*OLD Only the objects that exist on the system are restored.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects. These
differences include:
v Authorization list: The authorization list of an object on the system is different than the authorization
list of an object from the save operation. Or the system on which a new object with an authorization
list is being restored is different from the system on which it was saved.
v Ownership: The owner of an object on the system is different than the owner of an object from the
save operation.
v Primary Group: The primary group of an object on the system is different than the primary group of
an object from the save operation.
Note: To use this parameter, you need *ALLOBJ special authority.
Restore Object using BRM (RSTBRM) 155
Single values
*NONE
None of the differences listed above are allowed on the restore operation.
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Other values (up to 4 repetitions)
*AUTL
Authorization list differences are allowed.
If an object already exists on the system with a different authorization list than the saved object,
the object is restored with the authorization list of the object on the system. New objects that are
being restored to a system that is different from which they were saved are restored and linked to
their authorization list. If the authorization list does not exist on the new system, the public
authority is set to *EXCLUDE.
If this value is not specified, authorization list differences are not allowed. If an object already
exists on the system with a different authorization list than the saved object, the object is not
restored. New objects that are being restored to a system that is different from which they were
saved are restored, but they are not linked to the authorization list, and the public authority is set
to *EXCLUDE.
*OWNER
Ownership differences are allowed.
If an object already exists on the system with a different owner than the saved object, the object is
restored with the owner of the object on the system.
If this value is not specified, ownership differences are not allowed. If an object already exists on
the system with a different owner than the saved object, the object is not restored.
*PGP Primary group differences are allowed.
If an object already exists on the system with a different primary group than the saved object, the
object is restored with the primary group of the object on the system.
If this value is not specified, primary group differences are not allowed. If an object already exists
on the system with a different primary group than the saved object, the object is not restored.
Top
Object ID (OBJID)
Specifies whether the SOM object ID of the restored object will be the SOM object ID of the object from
the save media, the SOM object ID of the object that exists on the system prior to the restore, or a new
SOM object ID generated by the system if the object does not exist on the system prior to the restore.
*SAVED
The restored object will have the SOM object ID it had when it was saved.
*SYS The restored object may have a new SOM object ID generated by the system. If the object is being
restored as a new object, a new SOM object ID will be given to the restored object. If an object
156 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
with the same name as the object from the media already exists on the system, the SOM object ID
of the restored object will be the same as the SOM object ID of the object on the system before the
restore.
Top
Create parent directories (CRTPRNDIR)
Specifies whether parent directories are to be created automatically if the directories do not exist before
the object is restored. This parameter only applies to ″root″ (/), QOpenSys, and user-defined file systems.
*NO Specifies parent directories are not to be automatically created.
*YES Specifies parent directories are to be automatically created. The parent directory owner can be
specified using the Parent directories owner (PRNDIROWN) parameter.
Top
Parent directory owner (PRNDIROWN)
Specifies the name of the owner to be used for the parent directory when creating parent directories
which do not exist.
*PARENT
Specifies the owner of the directory into which the parent directory is created will be used for the
owner of the created parent directory.
user-profile
Specifies the name of the user profile to use for the parent directory owner when creating parent
directories which do not exist.
Top
From system (FROMSYS)
Specifies the location and network identification of the system from which you want to restore media
information to the local system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Restore Object using BRM (RSTBRM) 157
Top
Examples
Example 1: Restoring All Integrated File System Objects
RSTBRM DEV(TAPE01)
This command allows you to select and restore integrated file system objects that were saved using the
SAVBRM command and whose contents information still exist in the media contents information. In this
example, the restore operation is for all integrated file system objects and will use device TAPE01 for the
restore operation.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2262
Errors occurred receiving data from TSM server.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
158 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Restore DLO using BRM (RSTDLOBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Restore DLO using BRM (RSTDLOBRM) command restores documents, folder and distribution
objects (mail) to the system from tape or save files. The media policy in force when the media
information was saved determines whether this information resides on tape or is stored in save files.
Note: Using the RSTDLOBRM command allows you to restore selected copies of document, folder and
distribution objects to the system based on the number of copies that are in the BRMS media content
information. This is accomplished by specifying a copy number for the Save level (SAVLVL) parameter.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. To use this command, you must be enrolled in the system distribution directory.
2. You must have authority to the Restore Document Library Object (RSTDLO) command to use this
command.
3. You must have *CHANGE authority to the parent folder and *ALL authority to the document if it
already exists on the system.
4. You must have *EXECUTE authority to the document library.
5. You cannot run another RSTDLOBRM, RSTDLO, SAVDLOBRM, SAVDLO or Reclaim Document
Library Object (RCLDLO) command specifying DLO(*ALL) while this command is running.
6. You can restore data from a TSM server device by using this command. You can only specify one
TSM device or *MEDCLS, which must select a TSM device. The TSM device selected can either be
*APPC, which supports the SNA network protocol, or *NET, which supports the TCP/IP protocol.
7. *ALLOBJ special authority is required to use any value other than *NONE for the ALWOBJDIF
parameter.
8. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
© Copyright IBM Corp. 1998, 2006 159
Parameters
Keyword Description Choices Notes
DLO Document library object Character value, *ALL Required,
Positional 1
SAVFLR Saved folder Character value Required,
Positional 2
DEV Device Name, *MEDCLS Required,
Positional 3
RSTFLR Restore into folder Character value, *SAME Optional
RENAME New object name Character value, *SAME Optional
SAVLVL Save level 1-99, *CURRENT Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
NEWOBJ Object name generation *SAME, *NEW Optional
ALWOBJDIF Allow object differences *NONE, *ALL Optional
RSTASP Restore to ASP Character value, *SAVASP, *SYSTEM Optional
FROMSYS From system Character value, *LCL Optional
Top
Document library object (DLO)
Specifies the name of the document library object that you want to restore. This is a required parameter.
*ALL All documents, folders and distribution objects (mail) that are saved on media and meet the
criteria specified on the Saved folder (SAVFLR) parameter are restored.
document-name
Specify the name of the document library object that you want to restore.
Top
Saved folder (SAVFLR)
Specifies the name of the folder on the media from which the documents are restored.
This is a required field.
Top
Device (DEV)
Specifies the device name or a specific media class that is to be used to restore the object. You must use a
single device that is known to the system for recovery processing.
You can restore data from a TSM (ADSM) server using this command. You can only specify one TSM
type server or *MEDCLS, which must select a TSM server. The device selected can either be *APPC,
which supports SNA network protocol, or *NET, which supports TCPIP protocol.
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined, a device supporting that media class is selected to restore the
requested object or objects.
160 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
device-name
Specify the name of the device that you want to use to restore the selected object or objects.
Top
Restore into folder (RSTFLR)
Specifies the name of the folder in which the restored folders and documents to be restored will be
placed. The folder must exist on the system or when *ALL is specified on the Document library object
(DL0) parameter, the saved folder must exist on the media.
*SAME
The folders and documents to be restored are placed into the same folder from which they were
saved.
restore-folder-name
Specify the name of the folder where the restored documents and folders are to be placed.
Top
New object name (RENAME)
Specifies the new user-assigned name for the restored document.
*SAME
The document is restored with the name it had when it was saved.
document-name
Specify the new user-assigned name that the document had after being restored.
Note: You cannot specify a document name if you specify *ALL in the Document library object
(DLO) parameter.
Top
Save level (SAVLVL)
Specifies the copy of the object that you want to restore from the media content information.
*CURRENT
The most current copy of the object is restored.
save-level-number
Specify the age of the copy that you want to restore from the media content information. You can
specify a copy number from 1 - 99. For instance, if you want to restore the next to the last most
recent copy specify 1.
Top
End of tape option (ENDOPT)
Specifies, when volume is used, what positioning operation is automatically done on the volume after the
restore operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the volume is reached.
Restore DLO using BRM (RSTDLOBRM) 161
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound but not unloaded after the recovery operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the recovery operation ends.
Top
Object name generation (NEWOBJ)
Specifies whether a new library-assigned name and system object name are generated for the folders and
documents being restored.
*SAME
The library-assigned name and system object name do not change.
*NEW A new library-assigned name and system object name are generated for each document or folder
being restored.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects.
Note: To use this parameter, you need *ALLOBJ special authority.
*NONE
None of the differences listed above are allowed on the restore operation.
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Note: If restoring objects that BRMS saved with SAVOBJ or SAVCHGOBJ, BRMS will change the
parameter to ALWOBJDIF(*FILELVL *AUTL *OWNER *PGP) for these objects to prevent the
renaming.
Top
Restore to ASP (RSTASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) number to which you want to restore
document library objects.
162 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SAVASP
Restore the saved document library object to the auxiliary storage pool that it resided in when it
was saved by BRMS.
*SYSTEM
The document library object is restored to the system (1) auxiliary storage pool.
restore-to-ASP-name
Specify the name of the system (1) or basic user auxiliary storage pool (2-32) to which you are
restoring the document library object.
restore-to-ASP-number
Specify the number of the system (1) or basic user auxiliary storage pool (2-32) number to which
you want to restore the document library object.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
From system (FROMSYS)
Specifies the location and network identification of the system from which you want to restore media
information to the local system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Examples
Example 1: Restoring All DLOs in a Subfolder
RSTDLOBRM DLO(*ALL) SAVFLR(’ACCTMST/ACCT03’)
COPY(*CURRENT) DEV(TAP09)
This command allows you to select and restore folders and subfolders that were saved using the
SAVDLOBRM command and whose contents information still exist in the media contents information. In
this example, the restore operation is for all DLO with a folder called ACCTMST and a subfolder called
ACCT03. The most recent copy is restored using device TAP09.
Restore DLO using BRM (RSTDLOBRM) 163
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2112
ASP &2 not valid.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
164 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Restore Library using BRM (RSTLIBBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Restore Library using BRM (RSTLIBBRM) command allows you to restore a library that is in the
BRMS media information. Any library that was saved by the Save Library using BRM (SAVLIBBRM)
command or was in a control group that was saved can be restored by the RSTLIBBRM command. The
RSTLIBBRM command restores the whole library, which includes the library description, object
descriptions and contents of the objects in the library.
Note: Using the RSTLIBBRM command allows you to restore selected copies of a library from the BRMS
media content information. For instance, a recovery request for a copy of a library will restore the full
backup of the library that corresponds to the copy requested in the Save level (SAVLVL) parameter, plus
the last incremental backup of that library preceding the next full backup of the library, plus any object
level saves that are between the two full saves. This assures that the copy that you requested has all
changes applied prior to the next full save.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the Restore Library (RSTLIB) command to use this command.
2. You must have save system (*SAVSYS) special authority, or have all of the following object authorities:
v You must have *ADD and *READ authority to the QSYS library to restore libraries which do not
exist.
v You must have *OBJEXIST authority to restore over objects contained in a library.
3. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (RSTASP) parameter.
4. You can restore data from a TSM server device by using this command. You can only specify one
TSM device or *MEDCLS, which must select a TSM device. The TSM device selected can either be
*APPC, which supports the SNA network protocol, or *NET, which supports the TCP/IP protocol.
5. *ALLOBJ special authority is required to use any value other than *NONE for the ALWOBJDIF
parameter.
6. These additional restrictions apply when applying journal changes:
v You must have authority to the APYJRNCHG command.
© Copyright IBM Corp. 1998, 2006 165
v You must have *EXECUTE authority to the libraries containing the files, journals and journal
receivers.
v You must have *OBJEXIST authority to restore any files that already exist on the system.
v You must have *CHANGE and *OBJMGT authority to apply journal changes to journaled files.
v You must have *USE authority to any journal or journal receiver used to apply journal changes.
7. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
SAVLIB Library Single values: *MEDINF
Other values (up to 50 repetitions): Name
Required,
Positional 1
DEV Device Values (up to 4 repetitions): Name, *MEDCLS Required,
Positional 2
PRLRSC Parallel device resources Element list Optional,
Positional 3 Element 1: Minimum
resources
1-32, *SAV, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
SAVLVL Save level 1-99, *CURRENT, *SAVDATE Optional
SAVDATE Save date Date Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
OPTION Option *ALL, *NEW, *OLD, *FREE Optional
MBROPT Database member option *MATCH, *ALL, *NEW, *OLD Optional
SPLFDTA Spooled file data *NEW, *NONE Optional
ALWOBJDIF Allow object differences Single values: *NONE, *ALL
Other values (up to 4 repetitions): *AUTL, *FILELVL,
*OWNER, *PGP
Optional
RSTLIB Restore to library Name, *SAVLIB Optional
RSTASP Auxiliary storage pool Character value, *SAVASP, *SYSTEM Optional
FROMSYS From system Character value, *LCL Optional
Top
Library (SAVLIB)
Specifies the name of the library that you want to restore.
This is a required field.
Single values
*MEDINF
You want to restore BRMS media information. The QUSRBRM library contains the BRMS media
information.
Note: Recovery for library level information consists of seven objects that are restored to the
QUSRBRM library. Recovery for object level information consists of the eight objects that are
166 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
restored to the QUSRBRM library. The first seven objects are required for library level recovery
and the eighth object is required for object level recovery.
Other values (up to 50 repetitions)
library-name
Specify the name of the library that you want to restore. The library name must be an entry in
the BRMS media content information.
Top
Device (DEV)
Specifies the name of the devices used for the restore operation. The device must already be in the BRMS
device table.
Note: Multiple systems can share the use of a tape device or a Media library device (MLB). When the
device is a tape device (not an MLB device), BRMS can help you manage the use of the device by
multiple systems if you indicate that the device is shared.
You can restore data from a TSM (ADSM) server using this command. You can only specify one TSM
type server or *MEDCLS, which must select a TSM server. The device selected can either be *APPC,
which supports SNA network protocol, or *NET, which supports TCPIP protocol.
This is a required parameter.
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined, a device supporting the density specified in the media class is selected
to perform the save operation.
Note: The special value *MEDCLS can be specified up to four times on the Device (DEV)
parameter only if the parallel Min Resource is of value *NONE. Otherwise, *MEDCLS can only be
specified once. BRMS will attempt to use the maximum number of devices that can be allocated
for this operation.
To perform a parallel restore with more devices, the value *MEDCLS can and may only be
specified once and parallel minimum and maximum resources must be greater than one or *SAV.
device-name
Specify the names of one or more devices used for the restore operation. If you are using more
than one device (up to a maximum of four), specify the names of the devices in the order in
which they are used.
Note: When doing a serial restore, only one media library device can be specified. When doing a
parallel restore, multiple media library devices can be specified.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a restore operation.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel restore.
Restore Library using BRM (RSTLIBBRM) 167
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
Note: Transferring save files to tape does not support parallel operations.
*SAV Specifies that the same number of device resources used for the save will be used for the restore.
If the save was a serial save, then the restore will also be serial.
*AVAIL
Use any available devices up to the maximum specified. Specifying this value for the minimum
will allow BRMS to use any available resources, but will complete using one resource if only one
is available at the start of the command.
*NONE
No device resources are to be used. The restore will be performed as a serial restore.
1-32 Specify the minimum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Element 2: Maximum Resources
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices. Specifying this value for the maximum will allow BRMS to use any
available resources but at a minimum use the value specified in the minimum element.
1-32 Specify the maximum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Top
Save level (SAVLVL)
Specifies the copy of the library that you want to restore from the media content information.
*CURRENT
The most current copy of the library is restored. This will include the most recent library as well
as all incremental backups of the library.
*SAVDATE
Specifies a save date will be used to identify the level of object you want to restore. The save date
is specified on Save date (SAVDATE) parameter.
save-level-number
Specify the age of the copy that you want to restore from the media content information. You can
specify a copy number from 1 - 99. For instance, if you want to restore the next to the last most
recent copy specify 1.
Top
Save date (SAVDATE)
Specifies a save date for the object you want to restore. The most recent save of the object on the
specified date will be restored. The object is not restored if no save of the object occurred on the specified
date.
168 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: A value must be specified for this parameter if *SAVDATE is specified for the Save level (SAVLVL)
parameter.
save-date
Specify the save date of the object you want to restore. The date must be entered in the format
specified by the QDATFMT system value with or without date separators. The system value
QDATSEP specifies the date seperator character that can be used.
Top
End of tape option (ENDOPT)
Specifies, when volume is used, what positioning operation is automatically done on the volume after the
restore operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound but not unloaded after the recovery operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the recovery operation ends.
Top
Option (OPTION)
Specifies how to handle restoring each object.
*ALL All the objects in the saved library are restored to the library. Old objects on tape or in a save file
replace the current versions in the library on the system. Objects not having a current version are
added to the library on the system. Objects presently in the library, but not on the media, remain
in the library.
*FREE The saved objects are restored only if they exist in the system library with their space freed. The
saved version of each object is restored in the system in its previously freed space. This option
restores objects that had their space freed when they were saved. If any saved objects are no
longer part of the current version of the library, or if the space is not free for any object, the
object is not restored. The restore operation continues, and all of the freed objects are restored.
*NEW Only the objects in the saved library that do not exist in the current version of the library on the
system are added to the library. Only objects not known to the library on the system are restored;
known objects are not restored. This option restores objects that were deleted after they were
saved or that are new to this library. If any saved objects have a version already in the library on
the system, they are not restored, and an informational message is sent for each one, but the
restore operation continues.
*OLD Only the objects in the library having a saved version are restored; that is, the version of each
object currently in the library is replaced by the saved version. Only objects known to the library
are restored. If any saved objects are no longer part of the online version of the library, they are
not added to the library; an informational message is sent for each one, but the restore continues.
Restore Library using BRM (RSTLIBBRM) 169
Top
Database member option (MBROPT)
Specifies for database files that exist on the system, which members are restored. If *MATCH is used, the
member list in the saved file must match, member for member, the current version in the system. All
members are restored for files that do not exist, if the file is restored.
*MATCH
The saved members are restored if the lists of the members where they exist are a match, member
for member, for the lists of the current system version. MBROPT(*MATCH) is not valid when
*ALL is specified on the Allow object differences (ALWOBJDIF) parameter.
*ALL All members in the saved file are restored.
*NEW Only new members (members not known to the system) are restored.
*OLD Only members already known to the system are restored.
Top
Spooled file data (SPLFDTA)
Specifies whether saved spooled file data and attributes are restored for restored output queues.
*NEW Specifies new saved spooled file data and attributes are restored for saved output queues. The
saved spooled files will be restored to the same output queue from which these were saved if
there is no existing spooled file on the system having the same attributes.
*NONE
Specifies no spooled file data or attributes are restored for restored output queues.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects. These
differences include:
v Authorization list: The authorization list of an object on the system is different than the authorization
list of an object from the save operation. Or the system on which a new object with an authorization
list is being restored is different from the system on which it was saved.
v File level identifier: The creation date and time of the database file on the system does not match the
creation date and time of the file that was saved.
v Member level identifier: The creation date and time of the database file member on the system does
not match the creation date and time of the member that was saved.
v Ownership: The owner of an object on the system is different than the owner of an object from the
save operation.
v Primary Group: The primary group of an object on the system is different than the primary group of
an object from the save operation.
Note: To use this parameter, you need *ALLOBJ special authority.
Single values
*NONE
None of the differences listed above are allowed on the restore operation.
170 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Note: If restoring objects that BRMS saved with SAVOBJ or SAVCHGOBJ, BRMS will change the
parameter to ALWOBJDIF(*FILELVL *AUTL *OWNER *PGP) for these objects to prevent the
renaming.
Other values (up to 4 repetitions)
*AUTL
Authorization list differences are allowed.
If an object already exists on the system with a different authorization list than the saved object,
the object is restored with the authorization list of the object on the system. New objects that are
being restored to a system that is different from which they were saved are restored and linked to
their authorization list. If the authorization list does not exist on the new system, the public
authority is set to *EXCLUDE.
If this value is not specified, authorization list differences are not allowed. If an object already
exists on the system with a different authorization list than the saved object, the object is not
restored. New objects that are being restored to a system that is different from which they were
saved are restored, but they are not linked to the authorization list, and the public authority is set
to *EXCLUDE.
*FILELVL
File level identifier and member level identifier differences are allowed.
An attempt will be made to restore existing physical files even though the physical file on the
save media may have a different file level identifier or member level identifier than the physical
file on the system. The physical file data will only be restored for those physical files whose
format level identifiers on the save media match the format level identifiers of the corresponding
physical file on the system.
If this value is not specified, file level identifier and member level identifier differences are not
allowed. If an object already exists on the system with a different file level identifier or member
level identifier than the saved object, the object is not restored.
*OWNER
Ownership differences are allowed.
If an object already exists on the system with a different owner than the saved object, the object is
restored with the owner of the object on the system.
If this value is not specified, ownership differences are not allowed. If an object already exists on
the system with a different owner than the saved object, the object is not restored.
*PGP Primary group differences are allowed.
If an object already exists on the system with a different primary group than the saved object, the
object is restored with the primary group of the object on the system.
If this value is not specified, primary group differences are not allowed. If an object already exists
on the system with a different primary group than the saved object, the object is not restored.
Top
Restore Library using BRM (RSTLIBBRM) 171
Restore to library (RSTLIB)
Specifies whether the library contents are restored to the same library from which they were saved, or to
a different library.
*SAVLIB
The library contents are restored to the same library or libraries in which they were saved.
library-name
Specify the name of the library to which the saved library contents are restored.
Note: If a Structured Query Language (SQL) database is restored to a library other than the one
in which it was saved, the journals are not restored.
Top
ASP (RSTASP)
Specifies whether libraries and objects are restored to the auxiliary storage pool from which they were
saved or to a different auxiliary storage pool. Libraries and their contained objects can only be restored to
the system (1) auxiliary storage pool, a basic user (2-32) auxiliary storage pool, a primary auxiliary
storage pool or a secondary auxiliary storage pool.
More information about object types which can be restored to auxiliary storage pools can be found in the
Backup and Recovery book.
*SAVASP
The library and objects are restored to the ASP from which they were saved.
*SYSTEM
The library and objects are restored to the system (1) auxiliary storage pool.
auxiliary-storage-pool-name
The library and objects are restored to the auxiliary storage pool identified by this name. This can
be the name of any available basic user auxiliary storage pool (2-32) or any available primary or
secondary auxiliary storage pool.
auxiliary-storage-pool-number
The library and objects are restored to the system (1) or basic auxiliary storage pools (2-32)
identified by this number. The range of auxiliary storage pool number is 1-32.
Top
From system (FROMSYS)
Specifies the location and network identification of the system from which you want to restore media
information to the local system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
172 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
If the FROMSYS parameter is specified and the connection to the remote system could not be established
then the command will not use local data to perform the restore operation. Use the Work with Media
Information (WRKMEDIBRM) or Start Recovery using BRM (STRRCYBRM) commands to select and
restore the object.
Top
Examples
Example 1: Restoring a Library using BRMS
RSTLIBBRM SAVLIB(MYLIB) DEV(*MEDCLS) COPY(2) RSTASP(3)
This command restores a library called MYLIB. Any device that supports the media class assigned to the
media containing MYLIB can be used in the restore operation. The second copy of the library in the
media information is restored to auxiliary storage pool (ASP) 3.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2112
ASP &2 not valid.
CPF4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Restore Library using BRM (RSTLIBBRM) 173
Top
174 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Restore Object using BRM (RSTOBJBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Restore Object using BRM (RSTOBJBRM) command restores an object or objects from the BRMS
media content information. any object that was saved by the Save Object using BRM (SAVOBJBRM)
command or was saved as part of a control group can be restored by the RSTOBJBRM command. The
types of objects that can be restored by this command are listed on the Object types (OBJTYPE)
parameter. They can be saved either as separate objects or as part of the library save operation. The
RSTOBJBRM command restores the object description and contents of each object specified in the
command.
Note: Using the RSTOBJBRM command, Save level (SAVLVL) parameter allows you to restore selected
copies of an object from the BRMS media content information. For instance, a recovery request for copy 1
of an object will restore the next to the most recent copy of the object on the BRMS media content
information (current copy is the most recent copy).
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. If the user domain object user space (*USRSPC), user index (*USRIDX), or user queue (*USRQ) is
restored to a library that is not permitted in the system value QALWUSRDMN (allow user objects in
library), the object is converted to the system domain.
2. You must have authority to the Restore Object (RSTOBJ) command to use this command.
3. You must have save system (*SAVSYS) special authority, or have all of the following object authorities:
v You must have *EXECUTE authority to the restore library when restoring over objects contained in
a library.
v You must have *OBJEXIST authority to the objects contained in a library when restoring over those
objects.
4. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (RSTASP) parameter.
5. You can restore data from a TSM server device by using this command. You can only specify one
TSM device or *MEDCLS, which must select a TSM device. The TSM device selected can either be
*APPC, which supports the SNA network protocol, or *NET, which supports the TCP/IP protocol.
6. *ALLOBJ special authority is required to use any value other than *NONE for the ALWOBJDIF
parameter.
© Copyright IBM Corp. 1998, 2006 175
7. These additional restrictions apply when applying journal changes:
v You must have authority to the APYJRNCHG command.
v You must have *EXECUTE authority to the libraries containing the files, journals and journal
receivers.
v You must have *OBJEXIST authority to restore any files that already exist on the system.
v You must have *CHANGE and *OBJMGT authority to apply journal changes to journaled files.
v You must have *USE authority to any journal or journal receiver used to apply journal changes.
8. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
OBJ Object Single values: *ALL
Other values (up to 50 repetitions): Generic name, name
Required,
Positional 1
SAVLIB Library Name Required,
Positional 2
DEV Device Values (up to 4 repetitions): Name, *MEDCLS Required,
Positional 3
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *SAV, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
OBJTYPE Object type Single values: *ALL
Other values (up to 50 repetitions): Character value
Optional
SAVLVL Save level 1-99, *CURRENT, *SAVDATE Optional
SAVDATE Save date Date Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
OPTION Option *ALL, *NEW, *OLD, *FREE Optional
MBROPT Database member option *MATCH, *ALL, *NEW, *OLD Optional
SPLFDTA Spooled file data *NEW, *NONE Optional
ALWOBJDIF Allow object differences Single values: *NONE, *ALL
Other values (up to 4 repetitions): *AUTL, *FILELVL,
*OWNER, *PGP
Optional
RSTLIB Restore to library Name, *SAVLIB Optional
RSTASP Auxiliary storage pool Character value, *SAVASP, *SYSTEM Optional
FROMSYS From system Character value, *LCL Optional
Top
Object (OBJ)
Specifies the name of the object that you want to restore, a generic group of objects that you want to
restore, or all objects.
If the Object type (OBJTYPE) parameter is not specified when the command is run, all the object types,
listed in the description of that parameter are restored, if they are in the specified library on the media or
in the save file, and if they have the specified names.
176 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
This is a required parameter.
Single values
*ALL Restore all objects that meet the other requirements specified in the command.
Other values (up to 50 repetitions)
generic*-object-name
Specify one or more generic names of groups of objects that you want to restore. A generic name
is a character string that contains one or more characters followed by an asterisk (*). If an * is not
specified with the name, the system assumes that the name is a complete object name.
object-name
Specify the name of the object that you want to restore. You can specify up to 50 objects to restore
from the specified library.
Top
Library (SAVLIB)
Specifies the name of the library in which the objects reside that are to be restored. If the Restore to
library (RSTLIB) parameter is not specified, this is also the name of the library to which the objects are
restored. Specify the name of the library.
This is a required parameter.
Top
Device (DEV)
Specifies the name of the devices used for the restore operation. the device name must already be in the
BRMS device table.
Note: Multiple systems can share the use of a tape device or a media library device (MLB). When the
device is a tape device (not an MLB device), BRMS will manage the use of the device across multiple
systems if you indicate that the device is shared.
You can restore data from a TSM (ADSM) server using this command. You can only specify one TSM
type server or *MEDCLS, which must select a TSM server. The device selected can either be *APPC,
which supports SNA network protocol, or *NET, which supports TCPIP protocol.
This is a required parameter.
device-name
Specify the names of one or more devices used for the restore operation. If you are using more
than one device (up to four), specify the names of the devices in the order in which they are
used.
Note: When doing a serial restore, only one media library device can be specified. When doing a
parallel restore, multiple media libraries can be specified.
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined, a device supporting the density specified in the media class is selected
to do the restore operation.
Restore Object using BRM (RSTOBJBRM) 177
Note: The special value *MEDCLS can be specified up to four times on the device parameter only
if the parallel min resource is of value *NONE. Otherwise, *MEDCLS can only be specified once.
BRMS will attempt to use the maximum number of devices that can be allocated for this
operation.
To perform a parallel restore with more devices, the value *MEDCLS can and may only be
specified once and the parallel minimum and maximum resources must be greater than one or
*SAV.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a restore operation.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel restore.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
Note: Transferring save files to tape does not support parallel operations.
*SAV Specifies that the same number of device resources used for the save will be used for the restore.
If the save was a serial save, then the restore will also be serial.
*AVAIL
Use any available devices up to the maximum specified. Specifying this value for the minimum
will allow BRMS to use any available resources, but will complete using one resource if only one
is available at the start of the command.
*NONE
No device resources are to be used. The restore will be performed as a serial restore.
1-32 Specify the minimum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Element 2: Maximum Resources
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices. Specifying this value for the maximum will allow BRMS to use any
available resources but at a minimum use the value specified in the minimum element.
1-32 Specify the maximum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Top
178 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Object type (OBJTYPE)
Specifies the type of the object that you want to restore.
This is a required parameter.
Single values
*ALL All types of objects are to be included in the restore process.
Other values (up to 50 repetitions)
object-type
Specify the value for the type of object that you want to restore, such as command (*CMD), file
(*FILE), or program (*PGM). For a complete list of object types, position the cursor on the Object
type (OBJTYPE) parameter and press the F4 key.
Top
Save level (SAVLVL)
Specifies the copy of the object that you want to restore from the media content information.
*CURRENT
The most current copy of the object is restored.
*SAVDATE
Specifies a save date will be used to identify the level of object you want to restore. The save date
is specified on Save date (SAVDATE) parameter.
save-level-number
Specify the age of the copy that you want to restore from the media content information. You can
specify a copy number from 1 - 99. For instance, if you want to restore the next to the last most
recent copy specify 1.
Top
Save date (SAVDATE)
Specifies a save date for the object you want to restore. The most recent save of the object on the
specified date will be restored. The object is not restored if no save of the object occurred on the specified
date.
Note: A value must be specified for this parameter if *SAVDATE is specified for the Save level (SAVLVL)
parameter.
save-date
Specify the save date of the object you want to restore. The date must be entered in the format
specified by the QDATFMT system value with or without date separators. The system value
QDATSEP specifies the date seperator character that can be used.
Top
Restore Object using BRM (RSTOBJBRM) 179
End of tape option (ENDOPT)
Specifies, when volume is used, what positioning operation is automatically done on the volume after the
restore operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound but not unloaded after the recovery operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the recovery operation ends.
Top
Option (OPTION)
Specifies how to handle restoring each object.
*ALL All the objects in the saved library are restored to the library on the system. Objects in the saved
library replace the objects in the library on the system. Saved objects not on the system are added
to the library on the system. Objects in the system library but not in the saved library remain in
the library.
*FREE Only objects that exist in the library on the system with their storage freed are restored.
*NEW Only the objects in the saved library that do not exist in the library on the system are restored.
*OLD Only the objects that exist in the library on the system are restored.
Top
Database member option (MBROPT)
Specifies for database files that exist on the system, which members are restored. Unless *MATCH is
used, the member list in the saved file need not match member for member, the current version in the
system.
*MATCH
The saved members are restored if the lists of the members where they exist are a match, member
for member, for the lists of the current system version. MBROPT(*MATCH) is not valid when
*ALL is specified on the Allow object differences (ALWOBJDIF) parameter.
*ALL All members in the saved file are restored.
*NEW Only new members (members not known to the system) are restored.
*OLD Only members already known to the system are restored.
Top
180 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Spooled file data (SPLFDTA)
Specifies whether saved spooled file data and attributes are restored for restored output queues.
*NEW Specifies new saved spooled file data and attributes are restored for saved output queues. The
saved spooled files will be restored to the same output queue from which these were saved if
there is no existing spooled file on the system having the same attributes.
*NONE
Specifies no spooled file data or attributes are restored for restored output queues.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects. These
differences include:
v Authorization list: The authorization list of an object on the system is different than the authorization
list of an object from the save operation. Or the system on which a new object with an authorization
list is being restored is different from the system on which it was saved.
v File level identifier: The creation date and time of the database file on the system does not match the
creation date and time of the file that was saved.
v Member level identifier: The creation date and time of the database file member on the system does
not match the creation date and time of the member that was saved.
v Ownership: The owner of an object on the system is different than the owner of an object from the
save operation.
v Primary Group: The primary group of an object on the system is different than the primary group of
an object from the save operation.
Note: To use this parameter, you need *ALLOBJ special authority.
Single values
*NONE
None of the differences listed above are allowed on the restore operation.
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Note: If restoring objects that BRMS saved with SAVOBJ or SAVCHGOBJ, BRMS will change the
parameter to ALWOBJDIF(*FILELVL *AUTL *OWNER *PGP) for these objects to prevent the
renaming.
Other values (up to 4 repetitions)
*AUTL
Authorization list differences are allowed.
If an object already exists on the system with a different authorization list than the saved object,
the object is restored with the authorization list of the object on the system. New objects that are
Restore Object using BRM (RSTOBJBRM) 181
being restored to a system that is different from which they were saved are restored and linked to
their authorization list. If the authorization list does not exist on the new system, the public
authority is set to *EXCLUDE.
If this value is not specified, authorization list differences are not allowed. If an object already
exists on the system with a different authorization list than the saved object, the object is not
restored. New objects that are being restored to a system that is different from which they were
saved are restored, but they are not linked to the authorization list, and the public authority is set
to *EXCLUDE.
*FILELVL
File level identifier and member level identifier differences are allowed.
An attempt will be made to restore existing physical files even though the physical file on the
save media may have a different file level identifier or member level identifier than the physical
file on the system. The physical file data will only be restored for those physical files whose
format level identifiers on the save media match the format level identifiers of the corresponding
physical file on the system.
If this value is not specified, file level identifier and member level identifier differences are not
allowed. If an object already exists on the system with a different file level identifier or member
level identifier than the saved object, the object is not restored.
*OWNER
Ownership differences are allowed.
If an object already exists on the system with a different owner than the saved object, the object is
restored with the owner of the object on the system.
If this value is not specified, ownership differences are not allowed. If an object already exists on
the system with a different owner than the saved object, the object is not restored.
*PGP Primary group differences are allowed.
If an object already exists on the system with a different primary group than the saved object, the
object is restored with the primary group of the object on the system.
If this value is not specified, primary group differences are not allowed. If an object already exists
on the system with a different primary group than the saved object, the object is not restored.
Top
Restore to library (RSTLIB)
Specifies whether the objects are restored to a different library or to the same library where they were
saved.
*SAVLIB
The objects are restored to the same library from which they were saved.
library-name
Specify the name of the library to which the saved objects are restored.
Top
ASP (RSTASP)
Specifies whether objects are restored to the auxiliary storage pool from which they were saved or to a
different auxiliary storage pool. Library objects can only be restored to the system (1) auxiliary storage
pool, a basic user (2-32) auxiliary storage pool, a primary auxiliary storage pool or a secondary auxiliary
storage pool.
182 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
More information about object types which can be restored to auxiliary storage pools can be found in the
Backup and Recovery Book.
*SAVASP
The objects are restored to the auxiliary storage pool from which they were saved.
*SYSTEM
The objects are restored to the system (1) auxiliary storage pool.
auxiliary-storage-pool-name
The objects are restored to the auxiliary storage pool identified by this name. This can be the
name of any available basic user auxiliary storage pool (2-32) or any available primary or
secondary auxiliary storage pool.
auxiliary-storage-pool-number
The objects are restored to the system (1) or basic auxiliary storage pools (2-32) identified by this
number. The range of auxiliary storage pool number is 1-32.
Top
From system (FROMSYS)
Specifies the location and network identification of the system from which you want to restore media
information to the local system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
If the FROMSYS parameter is specified and the connection to the remote system could not be established
then the command will not use local data to perform the restore operation. Use the Work with Media
Information (WRKMEDIBRM) or Start Recovery using BRM (STRRCYBRM) commands to select and
restore the object.
Top
Examples
RSTOBJBRM OBJ(AP1000) SAVLIB(APLIB) DEV(*MEDCLS) OBJTYPE(*FILE)
Restore Object using BRM (RSTOBJBRM) 183
This command restores an object named AP1000 which was saved from library APLIB. Any device that
supports the media class assigned to the media containing AP1000 can be used in the restore operation.
AP1000 is a file object.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2112
ASP &2 not valid.
CPF4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
184 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Object using BRM (SAVBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Object using BRM (SAVBRM) command saves a copy of one or more objects that can be used in
the integrated file system.
For more information about integrated file system commands, see the Integrated File System Introduction
book.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The SAVBRM command does not support optical files.
2. You cannot save QSYS and QDLS file systems using this command.
3. You must have authority to the SAV commands to use this command.
4. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (ASPDEV) parameter.
5. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
6. For additional restrictions when using this command to save objects by using name patterns in the
root directory, to save objects in libraries, or to save document library objects, see the Save Object
(SAV) command in Backup and Recovery book.
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
© Copyright IBM Corp. 1998, 2006 185
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
CTLGRPATR Use control group attributes *NO, *YES Optional
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Optional,
Positional 1
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
MEDPCY Media policy Name, *SYSPCY, *NONE Optional,
Positional 2
OBJ Objects Values (up to 300 repetitions): Element list Optional
Element 1: Name Path name, *
Element 2: Include or omit *INCLUDE, *OMIT
SUBTREE Directory subtree *ALL, *DIR, *NONE, *OBJ Optional
SAVACT Save active *NO, *SYNC, *YES Optional
SAVACTOPT Save active option *NONE, *ALWCKPWRT Optional
SAVACTMSGQ Save active message queue Qualified object name Optional
Qualifier 1: Save active
message queue
Name, *NONE, *WRKSTN
Qualifier 2: Library Name, *LIBL, *CURLIB
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SAVTYPE Type of save *FULL, *CUML, *INCR Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
PRECHK Object pre-check *NO, *YES Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
186 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
REFDATE Reference date Character value, *REF Optional
REFTIME Reference time Character value, *REF Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
PKGID Package identifier *NEW, *PRVSAV Optional
RCYEXITPGM Recovery exit program Qualified object name Optional
Qualifier 1: Recovery exit
program
Name, *NONE
Qualifier 2: Library Name
RCYEXITDTA Recovery exit program data Character value, *NONE Optional
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
Save Object using BRM (SAVBRM) 187
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
If CTLGRPATR(*YES) is specified, then the control group must be an existing BRMS control group. If
CTRLGRPATR(*NO) is specified, then you can specify an existing control group name, or a name that
you want to be associated with the save operation, even if the name is not an existing control group.
Top
Use control group attributes
Specifies whether to use control group attributes for device, parallel device resources, media policy, save
type, optimum block, sequence number, target release, clear, pre-check object, compression, compaction,
reference date and time, and expiration date from the control group specified in the control group
(CTLGRP) parameter.
The control group must be an existing BRMS backup control group.
Media policies using versioning cannot be used with the value *YES.
*NO Values will not be used from the specified control group. Values for device and media policy are
required.
*YES Values will be used from the specified control group.
Top
Device (DEV)
Specifies the device or devices to be used by this command.
Single values
*MEDCLS
Devices for this policy or control group are selected based on device types that support the
density for the media class specified in the media policy. The *MEDCLS special value is used for
devices that are part of a device pool, such as several systems that share a single or set of
devices. Devices are specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value. The Parallel Device Resource (PRLRSC) parameter must be *NONE. BRMS will attempt to use the
maximum number of devices that can be allocated for a save operation. If you want to use more than one
device for a parallel save operation the *MEDCLS must only be specified once and the PRLRSC
minimum and maximum responses must be greater than one.
Other values (up to 4 repetitions)
Specifies the name of the devices to be used for the save operation. the specified device name must
already be in the BRMS device table.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
188 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: Multiple systems can share the use of a tape device or a media library device (MLB). When the
device is a tape device (not an MLB device), BRMS can help you manage the use of the stand alone
device by multiple systems if you indicate the device is shared.
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
*NONE
There is no device for this save operation. Save files are used to store the saved data. Data in a
save file created with device *NONE will never be copied by BRMS. It is intended for online
access only.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can
be specified.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a parallel save operation.
Note: Transferring save files to tape does not support parallel operations.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel save.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
*NONE
No device resources are to be used. The save will be performed as a serial save. *NONE must be
specified when using a TSM or virtual tape device.
*AVAIL
Use any available devices up to the maximum of what was used for a save. Specifying this value
for the minimum will allow BRMS to use any available resources, but will complete using one
resource if only one is available at the start of the command.
1-32 Specify the minimum number of device resources to be used with this save command.
Element 2: Maximum Resources
Specifies the maximum number of device resources.
*MIN Uses the value specified for the minimum number of device resources.
Save Object using BRM (SAVBRM) 189
*AVAIL
Use any available devices for the save operation. Specifying this value for the maximum will
allow BRMS to use any available resources but at a minimum the value specified in the minimum
element.
1-32 Specify the maximum number of device resources to be used with this save command.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Saves using multiple parallel device resources with a target release prior to V5R4M0 will be performed
using only a single device resource.
Top
Media policy (MEDPCY)
Specifies the media policy that you want to use with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Objects (OBJ)
Specifies the objects that you want to include or exclude from a list of objects you want to save. A
maximum of 300 object name patterns can be specified.
190 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
For more information on specifying path names, refer to Chapter 2 of the Command Language Reference
book.
Additional information about object name patterns is in the Integrated File System Introduction book.
Element 1: Name
’*’ The objects in the current directory are saved.
’object-path-name-pattern’
Specify an object path name or a pattern that can match many names.
Restriction:
v You cannot list QDLS or QSYS.LIB objects in a link list. Use the appropriate *OBJ or *FLR list
for objects in these file systems.
Element 2: Omit or include
The second part specifies whether names that match the pattern should be included or omitted from the
operation. Note that in determining whether a name matches a pattern, relative name patterns are always
treated as relative to the current working directory. The Directory subtree (SUBTREE) parameter
determines whether the subtrees are included or omitted.
*INCLUDE
Objects that match the object name pattern are to be saved, unless overridden by an *OMIT
specification.
*OMIT
Objects matching the object name pattern are not to be saved. This overrides a *INCLUDE
specification and is intended to be used to omit a subset of a previously selected pattern.
Top
Directory subtree (SUBTREE)
Specifies whether directory subtrees are included in the save operation.
*ALL The entire subtree for each directory that matches the object name pattern is included. The
subtree includes all subdirectories and the objects within those subdirectories.
*DIR Objects in the first level of each directory that matches the object name pattern are included. The
subdirectories of each matching directory are included, but the objects in the subdirectories are
not included.
*NONE
No subtrees are included in the save operation. If a directory matches the object name pattern
specified, the objects in the directory are included. If the directory has subdirectories, neither the
subdirectories nor the objects in the subdirectories are included.
*OBJ Only the objects that exactly match the object name pattern will be processed. If the object name
pattern specifies a directory, objects in the directory are not included.
Top
Save active (SAVACT)
Specifies whether an object can be updated while it is being saved.
Save Object using BRM (SAVBRM) 191
Note: If your system is in a restricted state, this parameter is ignored and the save operation is performed
as if SAVACT(*NO) was specified.
Note: If you are using the MONSWABRM command as part of an *EXIT special operation in a control
group, the Save while active field must have a value of *YES for the entry that you want to save while
active. The Monitor Save While Active (MONSWABRM) command reviews the save while active message
queue and looks for the message indicating the end of synchronization. When synchronization is
detected, you can issue a command to the system.
*NO Objects that are not in use are not saved. Objects cannot be updated while being saved.
*SYNC
Objects can be saved and used at the same time. All of the object checkpoints occur at the same
time.
*YES Objects can be saved and used at the same time. The object checkpoints can occur at different
times.
Top
Save active option
Specifies options to be used with the save while active (SAVACT) parameter.
*NONE
No special save while active options will be used. Normal save while active processing will take
place; all objects will be locked and cannot be updated before the save while active checkpoint is
reached.
*ALWCKPWRT
Enables objects to be saved while they are being updated if the corresponding system attribute
for the object is set. This option should only be used by applications to save objects that are
associated with the application and that have additional backup and recovery considerations. For
more information see the Backup and Recovery book, SC41-5304.
Top
Save active message queue (SAVACTMSGQ)
Specifies the message queue that the save operation uses to notify the user that the checkpoint processing
is complete.
This parameter can be used to save the objects at a known, consistent boundary to avoid additional
recovery procedures following a restore operation. Applications can be stopped until the checkpoint
processing complete message is received.
Qualifier 1: Save active message queue
*NONE
No notification message is sent.
*WRKSTN
The notification message is sent to the work station message queue.
message-queue-name
Specify the name of the message queue that the notification message is sent to.
Qualifier 2: Library
192 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*LIBL The library list is used to locate the message queue.
*CURLIB
The current library for the job is used to locate the message queue. If no library is specified as the
current library for the job, the QGPL library is used.
library-name
Specify the name of the library where the message queue is located.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Type of save (SAVTYPE)
Specifies whether the save operation is to save all objects, objects changed since the last full save or
objects saved since the last incremental save.
*FULL Save all objects.
*CUML
Save only objects that have changed since the last full save.
*INCR
Save only objects that have changed since the last incremental save.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Save Object using BRM (SAVBRM) 193
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
194 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Saves using a target release prior to V5R4M0 with multiple parallel device resources will be performed
using only a single device resource.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Object pre-check (PRECHK)
Specifies whether the save operation ends if any of the selected objects cannot be saved.
*NO The save operation for a library continues, saving only those objects that can be saved.
Save Object using BRM (SAVBRM) 195
*YES If after all specified objects are checked, one or more objects cannot be saved, the save operation
for a library ends before any data is written. If multiple libraries are specified, the save operation
continues with the next library.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
196 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Reference date (REFDATE)
Specifies the reference date that the save operation uses for an incremental save. The reference date is the
date of a save that was performed under BRMS control.
*REF Use the date of the last full BRMS save for the *LINK keyword specified in a control group as the
reference date for this incremental save operation.
reference-date
Specify the date of the last full BRMS save that you want to use as the reference date for this
incremental save operation.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Reference time (REFTIME)
Specifies the reference time that the save operation uses for an incremental save. The reference time is the
time of save that was performed under BRMS control.
*REF Use the time of the last full BRMS save for the *LINK keyword specified in a control group as the
reference time for this incremental save operation.
reference-time
Specify the time of the last full BRMS save that you want to use as the reference time for this
incremental save operation.
If CTLGRPATR(*YES) is specified, this parameter cannot be specified. The value for this parameter will be
determined from the attributes of the control group specified on the CTLGRP parameter.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Save Object using BRM (SAVBRM) 197
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
198 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
Save Object using BRM (SAVBRM) 199
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
200 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Save Object using BRM (SAVBRM) 201
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
If CTLGRPATR(*YES) is specified, then *MEDPCY must be specified.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Package identifier
Specifies whether the package that this save operation will be part of is for a new package or a previous
package created by this job. A package is a group of related media files.
This parameter allows separate save operations to be tied to one entity of related objects from one or
multiple save operations.
*NEW The save operation will write the first or the only media file to be included in the package.
Subsequent save operations could use the *PRVSAV special value to be included in the same
package.
202 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*PRVSAV
The package identifier of the preceding save operation will be used. This allows the media file
output from this save operation to be considered related to (and will be recovered with) the
preceeding save operation. This group of related media files is called a BRMS package.
If the maximum number of media files allowed in a single package is reached, a new package
will be automatically created.
Top
Recovery exit program
Specifies the name of the recovery exit program and library that will be called on a recovery of the object.
The exit program will be called before the restore and after the recovery of the object being saved.
A recovery exit program may only be specified when *NEW is specified for the Package identifier
(PKGID) parameter.
The exit program must exist during post processing of a recovery.
Qualifier 1: Recovery exit program
*NONE
No recovery exit program is assigned to the current package.
recovery-exit-program
Specify the name of the recovery exit program to be called.
Qualifier 2: Library
library-name
Specify the name of the library in which the recovery exit program exists.
Top
Recovery exit data
Specifies the user defined data that will be passed to the recovery exit program on the recovery of the
object or objects being saved.
*NONE
No recovery exit program data will be passed to the recovery exit program.
recovery-exit-program-data
Specify data to be passed to the recovery exit program.
Top
Examples
Example 1: Save Integrated File System Objects
SAVBRM DEV(*MEDCLS) MEDPCY(*SYSPCY)
This command saves all integrated file system objects using the device specified in the system policy.
Example 2: Save Integrated File System Objects on an Auxiliary Storage Pool Device
Save Object using BRM (SAVBRM) 203
SAVBRM DEV(*MEDCLS) OBJ((’/dev/PRIMETIME/*’)) MEDPCY(*SYSPCY)
This command saves all integrated file system objects in auxiliary storage pool device PRIMETIME using
the device specified in the system policy.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
204 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save DLO using BRM (SAVDLOBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Document Library Object using BRM (SAVDLOBRM) command saves a copy of the specified
document, folders or distribution objects (mail).
Note:
v When a folder is saved, the folder object is saved along with the documents contained in that folder
and the subfolders and documents in the subfolders and all successively nested folders and
documents.
v Distribution objects (mail) cannot be saved or restored for individual users. Mail can be saved only for
all users.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. If *SEARCH is specified for the Document library object (DLO) parameter, then *CUML or *INCR
must be specified for the Type of save (SAVTYPE) parameter.
2. If *SEARCH is specified for the Document library object (DLO) parameter, then *NONE must be
specified for the Omit folders (OMITFLR) parameter.
3. If *ANY is specified for the Folder (FLR) parameter, then *ALL or *SEARCH must be specified for the
Document library object (DLO) parameter.
4. You must have authority to the SAVDLO command.
5. You must have *ALLOBJ or *SAVSYS special authority to use this command. Users that do not have
*ALLOBJ or *SAVSYS special authority must:
v Have *ALL authority for each document or folder to be saved.
v Be enrolled as Document Interchange Architecture (DIA) users.
6. This command does not support the *MAIL choice found on the SAVDLO command, Document
library object (DLO) parameter.
7. This command cannot be used while another job is running commands such as RCLDLO, SAVDLO,
SAVDLOBRM, RSTDLO and RSTDLOBRM because exclusive use of internal objects may have been
obtained by these commands.
8. Determining document or folder ownership does not include checking group profiles if one is
associated with the specified user profile.
© Copyright IBM Corp. 1998, 2006 205
9. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
DLO Document library object Character value, *ALL, *SEARCH Required,
Positional 1
FLR Folder Single values: *ANY, *NONE
Other values (up to 100 repetitions): Character value
Optional,
Positional 4
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 2
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 3
SAVACT Save active *NO, *YES Optional
OBJDTL Retain object detail *NO, *YES Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
SAVTYPE Type of save *FULL, *CUML, *INCR Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
206 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
OMITFLR Omit folders Single values: *NONE, *BKUPCY
Other values (up to 100 repetitions): Character value
Optional
ASP Auxiliary storage pool Character value, *ANY, *SYSTEM Optional
REFDATE Reference date Character value, *REF Optional
REFTIME Reference time Character value, *REF Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Document library object (DLO)
Specifies the documents and folders to save. To save an entire folder, *ALL must be specified. All other
values for this parameter only save documents.
This is a required parameter.
*SEARCH
All documents and folders that meet the specified search values are saved. Search values are
specified by using the following parameters.
v Folder (FLR parameter)
v Last changed date (REFDATE parameter)
v Last changed time (REFTIME parameter)
*ALL All document library objects further qualified by the FLR parameter are to be saved. Specifying
DLO(*ALL) FLR(*ANY) saves all document library objects.
document-name
Specify the user-assigned name of the document that you want to save.
Top
Folder (FLR)
Specifies the folder or generic folder name in which the objects specified on the Document library object
(DLO) parameter are located.
Single values
Save DLO using BRM (SAVDLOBRM) 207
*ANY Document library objects can be saved from any folder. Consider the following when using the
FLR parameter:
v FLR(*ANY) is not valid when DLO(document-name) is specified.
v When SAVDLOBRM DLO(*ALL) FLR(*ANY) is specified, the following are saved:
– All documents
– All folders
– All distribution objects (mail)
*NONE
The documents saved are not in any folder. FLR(*NONE) is valid only when DLO(*ALL) is
specified.
Other values (up to 100 repetitions)
generic*-folder-name
Specify the generic name. A generic name is a character string of one or more characters followed
by an asterisk (*): for example, ABC*. The asterisk (*) substitutes for any valid characters. A
generic name specifies all folders with names that begin with the generic prefix, for which the
user has authority. If an asterisk is not included with the generic (prefix) name, the system
assumes it to be the complete folder name.
folder-name
Specify the name of the folder that you want to save.
Note: Folder names that have upper and lower case characters as part of the name must be
enclosed in single quotation marks.
A few examples are:
Folder Name Entry in SAVDLOBRM
Folder ’Folder’
FOLDER FOLDER
FOLDER/SUBFOLDER FOLDER/SUBFOLDER
Top
Device (DEV)
Specifies the device or devices to be used by this command.
Single values
*MEDCLS
Devices for this command are selected based on device types that support the density for the
media class specified in the media policy. The *MEDCLS special value is used for devices that are
part of a device pool, such as several systems that share a single or set of devices. Devices are
specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value.
Other values (up to 4 repetitions)
Specifies the name of the device to be used for the save operation. The device name must already be in
the BRMS device table.
208 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
This is a required parameter.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Single values
*MEDCLS
Any device that supports the media class specified in the media policy can be used for this save
operation.
Other values
*NONE
There is no device for this save operation. Save files are used to store the saved data.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Note: Only one media library device or one virtual tape device can be specified.
Top
Media policy (MEDPCY)
Specifies the media policy that you want to use with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
Save DLO using BRM (SAVDLOBRM) 209
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Save active (SAVACT)
Specifies if an object can be updated while it is being saved.
*NO Document library objects in use are not saved. Document library objects cannot be updated while
being used.
*YES Document library objects can be changed during the save request. Objects that are in use but are
not using application recovery will not be saved. See the Backup and Recovery Bookfor more
information on DLOs, saving while an object is in use, and application recovery.
Top
Retain object detail (OBJDTL)
Specifies whether the object detail is kept in the BRMS database for the documents saved.
*NO Do not save object detail.
*YES Save object detail.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
210 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Type of save (SAVTYPE)
The Type of save parameter allows you to specify whether all documents in a folder are to be saved or
only those documents that have changed.
*FULL Save all document library objects.
*CUML
You only want to save changed documents. *CUML indicates that the incremental save includes
all documents created or changed and all folders created since the last full save, and all mail.
*INCR
You only want to save changed documents. *INCR indicates that the incremental save includes all
documents created or changed and all folders created since the last incremental save, and all
mail.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
Note: If no objects are saved the volume is not opened and the ENDOPT parameter is ignored.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is rewound, but not unloaded.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the save operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
Save DLO using BRM (SAVDLOBRM) 211
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
212 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the device has the hardware compression feature installed, processing proceeds as if
DTACPR(*YES) is specified. If the compression feature is not installed or save data is written to a
save file, processing proceeds as if DTACPR(*NO) is specified.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the save is to tape and the target device supports compression, hardware compression is
performed. If device compression is not supported, or if the save data is written to a save file,
software compression is performed. If the save is running while other jobs on the system are
active and software compression is used, the overall system performance can be affected.
Top
Save DLO using BRM (SAVDLOBRM) 213
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Omit folder (OMITFLR)
Specifies the names of one or more folders, or the generic names of each group of folders, to be excluded
from the save operation.
Single values
*NONE
No folders are excluded from the save operation.
Other values (up to 100 repetitions)
*BKUPCY
The folders that are to be excluded are specified in the backup policy.
generic*-folder-name
Specify the generic name. A generic name is a character string of one or more characters followed
by an asterisk (*): for example, ABC*. The asterisk (*) substitutes for any valid characters. A
generic name specifies all folders with names that begin with the generic prefix, for which the
user has authority. If an asterisk is not included with the generic (prefix) name, the system
assumes it to be the complete folder name.
folder-name
Specify the name of a folder that you want to omit from this save operation.
Top
Auxiliary storage pool (ASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) of the document library object to be
saved.
*ANY The objects to be saved reside in the system (1) or basic user auxiliary storage pool (2-32). When
*ALL is specified on the DLO parameter, all document library objects on the system are saved.
*SYSTEM
The objects to be saved reside in the system (1) auxiliary storage pool. All document library
objects in basic user auxiliary storage pools (2-32) are ignored.
214 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
auxiliary-storage-pool-name
Specify the name of the system (1) or basic user auxiliary storage pool (2-32) whose objects you
want to save. All document library objects in other auxiliary storage pools are ignored.
auxiliary-storage-pool-number
Specify the number of the system (1) or basic user auxiliary storage pool (2-32) whose objects you
want to save. All document library objects in other auxiliary storage pools are ignored. The
number specified must designate an existing auxiliary storage pool that contains document
library objects.
Note: Document library objects are not supported for UDFS, primary and secondary auxiliary storage
pools.
Top
Reference date (REFDATE)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the date of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-date
Specify a date for this save operation to use as a beginning point for this incremental save.
Top
Reference time (REFTIME)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the time of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-time
Specify a time in hour, minute, second (hhmmss) format for this save operation to use as a
beginning point for this incremental save.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Save DLO using BRM (SAVDLOBRM) 215
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
216 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
Save DLO using BRM (SAVDLOBRM) 217
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
218 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
Save DLO using BRM (SAVDLOBRM) 219
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Performing a Save of All DLO’s
SAVDLOBRM DLO(*ALL) FLR(*ANY) DEV(TAP01) MEDPCY(FULL)
This command saves all folders, documents and mail to device TAP01 using the media policy FULL.
Example 2: Saving Objects Changed After a Specific Date
SAVDLOBRM DLO(*SEARCH) DEV(TAP01) MEDPCY(FULL) REFDATE(’1/1/03’)
This command saves all documents changed after 1/1/03 to device TAP01.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
220 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Save DLO using BRM (SAVDLOBRM) 221
222 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Folder List using BRM (SAVFLRLBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Folder List using BRM (SAVFLRLBRM) command saves backup or archive folder lists. Folder
lists are groups of folders that you select to include in a user-defined list name. Various parameters are
used to further define the save folder list process to BRMS.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVDLO command to use this command.
2. You must have *ALLOBJ or *SAVSYS special authority to use this command. Users that do not have
*ALLOBJ or *SAVSYS special authority must:
v Have *ALL authority for the documents and folder to be saved.
v Be enrolled as Document Interchange Architecture (DIA) users.
3. This command cannot be used while another job is running commands such as RCLDLO, SAVDLO,
SAVDLOBRM, RSTDLO and RSTDLOBRM because exclusive use of internal objects may have been
obtained by these commands.
4. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
© Copyright IBM Corp. 1998, 2006 223
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
FLRL Folder list Name Required,
Positional 1
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 2
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 3
SAVACT Save active *NO, *YES Optional
OBJDTL Retain DLO detail *NO, *YES Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
SAVTYPE Type of save *FULL, *CUML, *INCR Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
REFDATE Reference date Character value, *REF Optional
REFTIME Reference time Character value, *REF Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
224 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Folder list (FLRL)
Specifies the name of the folder list that you want to save. Lists are groups of folders that you want to
save together. Lists are added, changed or displayed using the Work with Lists using BRM (WRKLBRM)
command.
This is a required parameter.
Top
Device (DEV)
*MEDCLS
Devices for this command are selected based on device types that support the density for the
media class specified in the media policy. The *MEDCLS special value is used for devices that are
part of a device pool, such as several systems that share a single or set of devices. Devices are
specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value.
Specifies the name of the device to be used for the save operation. The device name must already be in
the BRMS device table.
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
This is a required parameter.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Single values
*MEDCLS
Any device that supports the media class specified in the media policy can be used for this save
operation.
Other values
*NONE
There is no device for this save operation. Save files are used to store the saved data.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Save Folder List using BRM (SAVFLRLBRM) 225
Note: Only one media library device or one virtual tape device can be specified.
Top
Media policy (MEDPCY)
Specifies the media policy that you want to use with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Save active (SAVACT)
Specifies if an object can be updated while it is being saved.
*NO Document library objects in use are not saved. Document library objects cannot be updated while
being used.
*YES Document library objects can be changed during the save request. Objects that are in use but are
not using application recovery will not be saved. See the Backup and Recovery Bookfor more
information on DLOs, saving while an object is in use, and application recovery.
Top
Retain DLO detail (OBJDTL)
You can specify whether the Document Library Object (DLO) detail is kept in the BRMS database for the
DLO’s saved.
*NO DLO detail is not kept in the BRMS backup history.
226 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*YES DLO detail is kept in the BRMS backup history.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
Type of save (SAVTYPE)
The Type of save parameter allows you to specify whether all documents in a folder are to be saved or
only those documents that have changed.
*FULL Save all documents in the list.
*CUML
Save only changed documents since the last full save. *CUML indicates that the incremental save
includes all documents created or changed and all folders created since the last full save, and all
mail.
*INCR
You only want to save changed documents. *INCR indicates that the incremental save includes all
documents created or changed and all folders created since the last incremental save, and all
mail.
Top
Save Folder List using BRM (SAVFLRLBRM) 227
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
Note: If no objects are saved the volume is not opened and the ENDOPT parameter is ignored.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is rewound, but not unloaded.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the save operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
228 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
Save Folder List using BRM (SAVFLRLBRM) 229
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the device has the hardware compression feature installed, processing proceeds as if
DTACPR(*YES) is specified. If the compression feature is not installed or save data is written to a
save file, processing proceeds as if DTACPR(*NO) is specified.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the save is to tape and the target device supports compression, hardware compression is
performed. If device compression is not supported, or if the save data is written to a save file,
software compression is performed. If the save is running while other jobs on the system are
active and software compression is used, the overall system performance can be affected.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
230 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Reference date (REFDATE)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the date of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-date
Specify a date for this save operation to use as a beginning point for this incremental save.
Top
Reference time (REFTIME)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the time of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-time
Specify a time in hour, minute, second (hhmmss) format for this save operation to use as a
beginning point for this incremental save.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Save Folder List using BRM (SAVFLRLBRM) 231
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
232 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
Save Folder List using BRM (SAVFLRLBRM) 233
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
234 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Save Folder List using BRM (SAVFLRLBRM) 235
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Saving Changed Folders in a List
SAVFLRLBRM FLRL(LISTA) DEV(TAP01 TAP02) MEDPCY(INCR) SAVTYPE(*INCR)
This command saves changed folders in folder list LISTA to tape devices TAP01 and TAP02 using media
policy INCR.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
236 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Library using BRM (SAVLIBBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Library using BRM (SAVLIBBRM) command saves a copy of one or more libraries.
This command saves the entire library, including the library description, the object descriptions, and the
contents of the objects in the library.
For job queues, message queues and logical files, only the object definitions are saved, not the contents.
The contents of output queues can be saved using SPLFDTA(*ALL), otherwise, only the output queue
object definition is saved. The contents of save files can be saved using SAVFDTA(*YES), otherwise, only
the save file object definition is saved.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVLIB or SAVCHGOBJ commands to use this command.
2. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (ASPDEV) parameter.
3. You must have either the *SAVSYS special authority or you must have:
v Read authority for, or be the owner of, each library specified.
v Object existence authority for each object in the library.
4. When saving to a save file, only one library can be specified.
5. No library (or object in the library) being saved can be updated by a job that is running at the same
time the save operation occurs unless save-while-active is used.
6. *NONE must be specified for the Spooled file data (SPLFDTA) parameter if the value for the Target
release (TGTRLS) parameter resolves to a release prior to V5R4M0. Use backup spooled file lists to
save of spooled files for restore to target releases prior to V5R4M0.
7. *NONE must be specified for the SPLFDTA parameter if the value for the Save type (SAVTYPE)
parameter is *CUML or *INCR.
8. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
© Copyright IBM Corp. 1998, 2006 237
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
LIB Library Single values: *ALLPROD, *ALLTEST, *ASP01, *ASP02,
*ASP03, *ASP04, *ASP05, *ASP06, *ASP07, *ASP08,
*ASP09, *ASP10, *ASP11, *ASP12, *ASP13, *ASP14,
*ASP15, *ASP16, *ASP17, *ASP18, *ASP19, *ASP20,
*ASP21, *ASP22, *ASP23, *ASP24, *ASP25, *ASP26,
*ASP27, *ASP28, *ASP29, *ASP30, *ASP31, *ASP32,
*ALLUSR, *IBM
Other values (up to 300 repetitions): Generic name, name
Required,
Positional 1
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 2
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 3
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
SAVACT Save active *NO, *LIB, *SYSDFN, *SYNCLIB Optional
238 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
SAVACTWAIT Save active wait time Element list Optional
Element 1: Object locks 0-99999, 120, *NOMAX
Element 2: Pending record
changes
0-99999, *LOCKWAIT, *NOCMTBDY, *NOMAX
Element 3: Other pending
changes
0-99999, *LOCKWAIT, *NOMAX
SAVACTMSGQ Save active message queue Qualified object name Optional
Qualifier 1: Save active
message queue
Name, *NONE, *WRKSTN
Qualifier 2: Library Name, *LIBL, *CURLIB
OBJDTL Retain object detail *ERR, *MBR, *NO, *OBJ, *YES Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
SAVTYPE Type of save *FULL, *CUML, *INCR Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
PRECHK Object pre-check *NO, *YES Optional
ACCPTH Save access paths *SYSVAL, *NO, *YES Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
SAVFDTA Save contents of save files *YES, *NO Optional
SPLFDTA Spooled file data *NONE, *ALL Optional
REFDATE Reference date Character value, *REF Optional
REFTIME Reference time Character value, *REF Optional
OBJJRN Journaled objects *NO, *YES Optional
STRLIB Starting library Name, *FIRST Optional
OMITLIB Libraries to omit Single values: *BKUPCY, *NONE
Other values (up to 300 repetitions): Generic name, name
Optional
OMITOBJ Objects to omit Values (up to 300 repetitions): Element list Optional
Element 1: Object Qualified object name
Qualifier 1: Object Generic name, name, *NONE, *ALL
Qualifier 2: Library Generic name, name, *ALL
Element 2: Object type Character value
ASPDEV Auxiliary storage pool Name, *SYSBAS, *CURASPGRP Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
Save Library using BRM (SAVLIBBRM) 239
Keyword Description Choices Notes
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Library (LIB)
Specifies which libraries are saved to removable media or to a save file.
Note: If you specify *ALLUSR or *IBM on this parameter, this command should be run when the
specified libraries are not being used. If objects in a library are in use while the library is being saved, the
objects are not saved unless you use SAVACT. To ensure a complete save of all libraries, run this
command with the systems in a restricted state. For example, if SAVLIBBRM LIB(*ALLUSR) is run when
the subsystem QSNADS is active the QAO* files are not saved in library QUSRSYS. To save the QAO*
files, end the QSNADS subsystem before running SAVLIBBRM LIB(*ALLUSR).
Note: Doing a SAVLIBBRM LIB(*IBM) and then doing a SAVLIBBRM LIB(*ALLUSR) saves the same
libraries as a SAVLIB LIB(*NONSYS), but requires two restore commands.
Restrictions:
1. The value *IBM is not valid on the Library (LIB) parameter when *SYNCLIB is specified on the Save
active (SAVACT) parameter.
2. A value other than *CURRENT cannot be specified for the Target release (TGTRLS) parameter when
*ALLUSR or *IBM is specified for the Library (LIB) parameter.
You can enter multiple values for this parameter.
*ALLPROD
Saves all libraries with an *PROD attribute. If you save both *ALLPROD and *ALLTEST, it is
equivalent to saving *ALLUSR.
*ALLTEST
Saves all libraries with an *TEST attribute. If you save both *ALLTEST and *ALLPROD, it is
equivalent to saving *ALLUSR.
*ASPnn
The system (1) or basic user auxiliary storage pool (2-32) that you want to save. For example: to
save libraries in ASP 2, enter *ASP02.
Note: When you specify ASPnn, only libraries in the specified basic user auxiliary storage pool
are included. No other object types are included.
Note: The usage of ASPnn applies only to system (1) or basic auxiliary storage pools. Support is
not provided for auxiliary storage pools that contain only individual objects such as save files,
journals, or journal receivers.
Note: The usage of ASPnn does not support UDFS, primary, or secondary auxiliary storage pools.
*ALLUSR
The special value *ALLUSR saves all user libraries.
Refer to the Special Values table for the Save Library (SAVLIB) Command in the Saving Libraries
section of the iSeries Backup and Recovery book for a list of libraries which can be restored using
this special value.
240 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: Libraries QGPL, QUSRSYS and QUSRBRM will be omitted in an *ALLUSR save to a TSM
(ADSM) server.
*IBM The special value *IBM saves all system (IBM) libraries.
Refer to the Special Values table for the Save Library (SAVLIB) Command in the Saving Libraries
section of the iSeries Backup and Recovery book for a list of libraries which can be restored using
this special value.
library-name
Specify the names of a maximum of 300 libraries to be saved. The libraries QSYS, QSRV, QTEMP,
QSPL, QSPLxxxx, QDOC, QDOCxxxx, QRPLOBJ, and QRECOVERY cannot be specified.
generic*-library-name
Specify one or more generic names of groups of libraries that you want to save. A generic name
is a character string that contains one or more characters followed by an asterisk (*). If an * is not
specified with the name, the system assumes that the name is a complete library name.
Top
Device (DEV)
Specifies the device or devices to be used by this command.
Single values
*MEDCLS
Devices for this policy or control group are selected based on device types that support the
density for the media class specified in the media policy. The *MEDCLS special value is used for
devices that are part of a device pool, such as several systems that share a single or set of
devices. Devices are specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value. The Parallel Device Resource (PRLRSC) parameter must be *NONE. BRMS will attempt to use the
maximum number of devices that can be allocated for a save operation. If you want to use more than one
device for a parallel save operation the *MEDCLS must only be specified once and the PRLRSC
minimum and maximum responses must be greater than one.
Other values (up to 4 repetitions)
Specifies the name of the devices to be used for the save operation. the specified device name must
already be in the BRMS device table.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Note: Multiple systems can share the use of a tape device or a media library device (MLB). When the
device is a tape device (not an MLB device), BRMS can help you manage the use of the stand alone
device by multiple systems if you indicate the device is shared.
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
Save Library using BRM (SAVLIBBRM) 241
*NONE
There is no device for this save operation. Save files are used to store the saved data. Data in a
save file created with device *NONE will never be copied by BRMS. It is intended for online
access only.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can
be specified.
Note: PRLRSC must be *NONE when DEV is *NONE.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can be
specified.
Top
Media policy (MEDPCY)
Specifies the media policy to be used with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
242 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a parallel save operation.
Note: Transferring save files to tape does not support parallel operations.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel save.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
*NONE
No device resources are to be used. The save will be performed as a serial save. *NONE must be
specified when using a TSM or virtual tape device.
*AVAIL
Use any available devices up to the maximum of what was used for a save. Specifying this value
for the minimum will allow BRMS to use any available resources, but will complete using one
resource if only one is available at the start of the command.
1-32 Specify the minimum number of device resources to be used with this save command.
Element 2: Maximum Resources
Specifies the maximum number of device resources.
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices for the save operation. Specifying this value for the maximum will
allow BRMS to use any available resources but at a minimum the value specified in the minimum
element.
1-32 Specify the maximum number of device resources to be used with this save command.
Top
Save active (SAVACT)
Specifies if an object can be updated while it is being saved.
Note: If your system is in a restricted state and the SAVACT parameter is specified, the save operation is
performed as if SAVACT(*NO) was specified.
Note: If you are using the MONSWABRM command as part of an *EXIT special operation in a control
group, the Save while active field must have a value of *YES for the entry that you want to save while
active. The Monitor Save While Active (MONSWABRM) command reviews the save while active message
queue and looks for the message indicating the end of library synchronization. When synchronization is
detected, you can issue a command to the system.
*NO Objects that are in use are not saved. Objects cannot be updated while being saved.
*LIB Objects in a library can be saved while they are in use by another job. All of the objects in a
library reach a checkpoint together and are saved in a consistent state in relationship to each
other.
Save Library using BRM (SAVLIBBRM) 243
Note: Libraries with thousands of objects may be too large for this option.
*SYNCLIB
Objects in a library can be saved while they are in use by another job. All of the objects and all of
the libraries in the save operation reach a checkpoint together and are saved in a consistent state
in relationship to each other.
Note: Multiple checkpoints will occur when using *SYNCLIB with an incremental *ALLUSR
backup item if new libraries were added to the system since the last save because
synchronization is only within commands, not across libraries. New libraries are saved using
Save Library (SAVLIB) command. Changed libraries are saved using the Save Changed Object
(SAVCHGOBJ) command with a reference date and time that is the earliest occurance of either
that last full or last incremental backup. BRMS uses its own reference dates rather than those in
the object description information to protect incremental saves from being affected by native save
operations.
Note: The *SYNCLIB choice cannot be used for the *IBM save type.
Note: If the libraries are being saved to save files or to TSM servers, each library is saved
individually rather than as a group. Synchronization messages are therefore sent individually for
each library rather than for the libraries as a group and synchronization is only within one
library, not across libraries.
*SYSDFN
Objects in a library can be saved while they are in use by another job. Objects in a library may
reach checkpoints at different times and may not be in a consistent state in relationship to each
other.
Note: Specifying this value eliminates some size restrictions and can allow a library to be saved
that could not be saved with SAVACT(*LIB).
Top
Save active wait time (SAVACTWAIT)
Specifies the amount of time to wait for an object that is in use, or for transactions with pending changes
to reach a commit boundary, before continuing the save operation.
Element 1: Object locks
Specifies the amount of time to wait for the object to become available for each object that is in use. If an
object remains in use for the specified time, the object is not saved.
For each object that is in use, specifies the amount of time to wait for the object to become available. If an
object remains in use for the specified time, the object is not saved.
120 The system waits up to 120 seconds for each individual object lock before continuing the save
operation.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for each individual object lock before continuing the save
operation. Valid values range from 0 through 99 999.
Element 2: Pending record changes
For each group of objects that are checkpointed together, specifies the amount of time to wait for
transactions with pending record changes to reach a commit boundary. The Save active prompt
244 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
(SAVACT) parameter determines which objects are checkpointed together. If 0 is specified, all objects
being saved must be at commit boundaries. If any other value is specified, all objects that are journaled
to the same journals as the objects being saved must reach commit boundaries. If a commit boundary is
not reached in the specified time, the save operation is ended, unless the value *NOCMTBDY is specified.
*LOCKWAIT
The system waits up to the value specified on Element 1 for commit boundaries for record
changes.
*NOCMTBDY
The system will save objects without requiring transactions with pending record changes to reach
a commit boundary. Therefore, objects may be saved with pending transactions.
If you restore an object that was saved with pending transactions, you cannot use the object until
you apply or remove journal changes (APYJRNCHG or RMVJRNCHG command) to reach
commit boundaries. You will need all journal receivers that contain information about the
pending transactions to apply or remove the changes. Until you apply or remove the changes,
any future save of that object will include the pending transactions, even if you do not specify
*NOCMTBDY.
Restrictions:
1. The value of the Target release (TGTRLS) parameter must be *CURRENT, V5R3M0 or later
release to use *NOCMTBDY.
2. The value of the Object detail (OBJDTL) parameter must be *YES or *MBR to use
*NOCMTBDY.
3. The name of the saved library cannot begin with the letter Q or # when using *NOCMTDBY.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for transactions with pending record changes to reach a
commit boundary. Valid values range from 0 through 99 999.
Element 3: Other pending changes
For each library, specifies the amount of time to wait for transactions with other pending changes to
reach a commit boundary. Other pending changes include the following:
v Data Definition Language (DDL) object level changes for that library.
v Any API commitment resource that was added without the option to allow normal save processing.
For more information, see the Add Commitment Resource (QTNADDCR) API in the System API
Reference information in the iSeries Information Center at
http://www.ibm.com/eserver/iseries/infocenter.
If a commit boundary is not reached for a library in the specified time, the library is not saved.
*LOCKWAIT
The system waits up to the value specified on Element 1 for the types of transactions that are
listed above to reach a commit boundary.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for the types of transactions that are listed above to reach a
commit boundary. Valid values range from 0 through 99 999.
Top
Save Library using BRM (SAVLIBBRM) 245
Save active message queue (SAVACTMSGQ)
Specifies the message queue that the save operation uses to notify the user that the checkpoint processing
for the library is complete. A separate message is sent for each library to be saved when the *SYSDFN or
*LIB value is specified on the Save active (SAVACT) parameter. When the *SYNCLIB value is specified
on the Save active (SAVACT) parameter, one message is sent for all libraries in the save operation.
Note: When multiple save operations are generated by BRMS, then one message is sent for each
command generated.
This parameter can be used to save the objects at a known, consistent boundary to avoid additional
recovery procedures following a restore operation. Applications can be stopped until the checkpoint
processing complete message is received.
Qualifier 1: Save active message queue
*NONE
No notification message is sent.
*WRKSTN
The notification message is sent to the work station message queue.
message-queue-name
Specify the name of the message queue that the notification message is sent to.
Qualifier 2: Library
*LIBL The library list is used to locate the message queue.
*CURLIB
The current library for the job is used to locate the message queue. If no library is specified as the
current library for the job, the QGPL library is used.
library-name
Specify the name of the library where the message queue is located.
Restrictions: If MONSWABRM is used to monitor the save while active message queue, and LIB(*MSGQ)
is specified for the MONSWABRM, the name specified here must match the name on the MSGQ
parameter for the MONSWABRM command.
MONSWABRM always uses the message queue from library QUSRBRM.
Top
Retain object detail (OBJDTL)
Specifies whether the object detail is kept in the BRMS database for the objects saved.
*ERR Error detail is kept in the BRMS backup history.
*MBR Object and member detail is kept in the BRMS backup history.
Note: Member level information is included with the object information for physical files, and
saved spooled file information is kept for saved output queues if *ALL was specified for the Save
spooled file data (SPLFDTA) parameter.
Note: This choice is the same as *YES.
*NO No object detail is kept in the BRMS backup history.
246 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*OBJ Object detail is kept in the BRMS backup history. No member level information or saved spooled
file information is kept.
*YES Object detail is kept in the BRMS backup history.
Note: When *YES is specified, member level information is kept for physical files in addition to
object information, and saved spooled file information is kept for saved output queues if *ALL
was specified for the Save spooled file data (SPLFDTA) parameter.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
Type of save (SAVTYPE)
Specifies whether all objects in a library are to be saved or only those objects that have changed.
Note: If a backup includes new libraries and BRMS has no history of a full backup of these libraries, then
a full backup will be performed regardless of the type of incremental specified.
*FULL Save all objects in the library.
*CUML
Only save items that have changed. *CUML indicates that the incremental save includes all
objects that have been changed since the last full save.
Save Library using BRM (SAVLIBBRM) 247
*INCR
Only save changed items. *INCR indicates that the incremental save includes all objects that have
been changed since the last incremental save.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
248 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
Save Library using BRM (SAVLIBBRM) 249
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Object pre-check (PRECHK)
Specifies whether the save operation ends if any of the selected objects cannot be saved.
*NO The save operation for a library continues, saving only those objects that can be saved.
*YES If after all specified objects are checked, one or more objects cannot be saved, the save operation
for a library ends before any data is written. If multiple libraries are specified, the save operation
continues with the next library.
Top
Save access paths (ACCPTH)
Specifies whether the logical file access paths that are dependent on the physical files being saved are
also saved. The access paths are saved only if all members on which the access paths are built are
included in this save operation. Informational messages are sent indicating the number of logical file
access paths saved with each physical file. All physical files on which an access path is built must be in
the same library. This parameter does not save logical objects; it only controls the saving of the access
paths. Information on the restoring of saved access paths is in the Backup and Recovery Book.
Attention: If the based-on physical files and the logical files are in different libraries, the access paths are
saved. However, if the logical files and the based-on physical files are in different libraries and the logical
files or physical files do not exist at restore time (such as during disaster recovery or the files were
deleted) the access paths are not restored. They are rebuilt. For the fastest possible restore operation for
logical files and the based-on physical files must be in the same library and must be saved at the same
time.
*SYSVAL
The system value QSAVACCPTH determines whether to save the logical file access paths that are
dependent on the physical files that are being saved.
*NO Only those objects specified on the command are saved. No logical file access paths are saved.
*YES The specified physical files and all eligible logical file access paths over them are saved.
Top
250 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Save contents of save files (SAVFDTA)
Specifies for save file objects, whether the description of a save file, or both the description and the
contents of a save file, are saved on the tape or in another save file.
*YES The description and contents of save files are saved.
*NO Only the description of a save file is saved.
Top
Spooled file data (SPLFDTA)
Specifies whether to save the spooled file data and attributes for saved output queues. The saved spooled
files and attributes can be viewed after the save using the Work with Saved Spooled Files
(WRKSPLFBRM) command if *YES or *MBR is also specified for the Retain object detail (OBJDTL)
parameter.
Save Library using BRM (SAVLIBBRM) 251
Note: Spooled file data is saved only when *FULL is specified for the Type of save (SAVTYPE)
parameter.
*NONE
Specifies no spooled file data or attributes are saved with saved output queues.
*ALL Specifies all available spooled file data and attributes are saved with saved output queues.
Top
Reference date (REFDATE)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the date of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-date
Specify a date for this save operation to use as a beginning point for this incremental save.
Top
Reference time (REFTIME)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the time of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-time
Specify a time in hour, minute, second (hhmmss) format for this save operation to use as a
beginning point for this incremental save.
Top
Journaled objects (OBJJRN)
Specifies whether to save changed objects that are currently being journaled and that have been journaled
since the date and time specified on the REFDATE and REFTIME parameters.
*NO Objects being journaled are not saved. If journaling was started after the specified date and time,
the changed objects or changed database file members are saved. The date and time of the last
journal start operation can be shown by using the Display Object Description (DSPOBJD)
command.
*YES Objects whose changes are entered in a journal are saved.
Note: The value entered applies only to save types of *INCR or *CUML. For save type *FULL, this value
is always treated as *YES.
Top
Starting library (STRLIB)
Specifies the library with which to begins the *IBM, *ALLUSR, *ALLPROD, *ALLTEST and *ASPnn save
operations.
252 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If an irrecoverable media error occurs during the save operation, this parameter can be used to restart the
operation.
*FIRST
The save operation begins with the first library in alphabetical order.
library-name
Specify the name of the library with which to begin the save operation.
Top
Libraries to omit (OMITLIB)
Specifies the libraries to be excluded from the save operation. This parameter is valid only if *ALLUSR,
*IBM or *ASPnn is specified on the Library (LIB) parameter.
Single values
*BKUPCY
The value specified for Libraries to omit field in the backup policy is used as the default value.
The default value for Libraries to omit (OMITLIB) parameter is assigned in the backup policy.
Other values (up to 300 repetitions)
*NONE
No libraries are excluded.
generic*-library-name
Specify the generic name. A generic name is a character string of one or more characters followed
by an asterisk (*): for example, ABC*. The asterisk (*) substitutes for any valid characters. A
generic name specifies all libraries with names that begin with the generic prefix, for which the
user has authority. If an asterisk is not included with the generic (prefix) name, the system
assumes it to be the complete library name.
library-name
Specify the name of the library to be excluded. You can specify a maximum of 300 libraries.
Top
Object to omit (OMITOBJ)
Specifies the objects to be excluded from the save operation. Up to 300 objects or generic object values
can be specified.
If the OMITOBJ parameter is not specified, no objects are excluded from the save operation.
*NONE
No objects are excluded from the save operation.
Element 1: Object
Qualifier 1: Object
*ALL Objects in the specified libraries are excluded, depending on the value specified for the object
type.
generic*-object-name
Specify the generic name of the object. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
Save Library using BRM (SAVLIBBRM) 253
valid characters. A generic name specifies all objects with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete object name.
object-name
Specify the name of the object that will be excluded from the save operation.
Qualifier 2: Library
*ALL The specified objects are excluded from all libraries that are part of the save operation.
generic*-library-name
Specify the generic name of the library. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all libraries with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete library name.
library-name
Specify the name of the library that contains the object to be excluded from the save operation.
Element 2: Object type
*ALL All object types are excluded from the save operation, depending on the value specified for the
object name.
object-type
Specify the type of the object to be excluded from the save operation.
Top
Auxiliary storage pool device (ASPDEV)
Use this parameter to specify the auxiliary storage pools from which libraries and objects can be included
in the save operation.
*SYSBAS
Specifies libraries or objects from only the system (1) and basic user auxiliary storage pools (2-32)
are included in the save.
*CURASPGRP
Specifies libraries or objects from only the auxiliary storage pool group currently set for the job
are included in the save. Libraries or objects from the system (1) and basic user auxiliary storage
pools (2-32) are omitted from the save.
auxiliary-storage-pool-device-name
Specifies libraries or objects from the named auxiliary storage pool device are included in the
save operation. This must be the name of a primary or secondary auxiliary storage pool. Libraries
or objects from the system (1) and basic user auxiliary storage pools (2-32) are omitted from the
save.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
254 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
Save Library using BRM (SAVLIBBRM) 255
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
256 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
Save Library using BRM (SAVLIBBRM) 257
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
258 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Saving a Library on a Tape Device
SAVLIBBRM LIB(MYLIB) DEV(TAP01) MEDPCY(FULL)
This command saves library MYLIB to device TAP01 using the media policy FULL.
Example 2: Saving a Generic Library on Multiple Devices
SAVLIBBRM LIB(MY*) DEV(TAP01 TAP02) MEDPCY(FULL)
This command saves all libraries that begin with the letters ’MY’ to devices TAP01 and TAP02 using the
media policy FULL.
Save Library using BRM (SAVLIBBRM) 259
Example 3: Saving a Library on an Auxiliary Storage Pool Device
SAVLIBBRM LIB(MYLIB) DEV(TAP01) MEDPCY(FULL) ASPDEV(PRIMETIME)
This command saves library MYLIB which resides on auxiliary storage pool device PRIMETIME to device
TAP01 using the media policy FULL.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
260 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Media Info using BRM (SAVMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Media Info using BRM (SAVMEDIBRM) command saves a copy of the information required to
perform recovery of items saved using BRMS. Media information can be saved at the object or library
level.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVOBJ command to use this command.
2. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 1
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 2
OPTION Option *LIB, *OBJ Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
ACCPTH Save access paths *SYSVAL, *NO, *YES Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
© Copyright IBM Corp. 1998, 2006 261
Keyword Description Choices Notes
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Device (DEV)
Specifies the names of the devices used for save media information operation. Each device name must
already be known on the system in the BRMS device table. If multiple devices are specified, they must
use the same media classes. If more than one device is used, specify the names of the devices in the order
in which they are used.
This is a required parameter.
You can enter multiple values for this parameter.
Single values
*MEDCLS
Any device that supports the media class specified in the media policy can be used for this save
operation.
Other values (up to 4 repetitions)
*NONE
The save operation is to a save file.
device-name
Specify the name of the device or devices that you want to use for this save operation.
Top
Media policy (MEDPCY)
Specifies the media policy for the volumes you are creating as a result of saving media information.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
262 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Option (OPTION)
Specifies whether you want to save media information at the object or library level.
*LIB You save media information at the library level. Recovery can only be done for libraries, not
individual objects in libraries.
*OBJ You save media information at the object level. Recovery can be done for libraries, individual
objects in libraries or members in physical files.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
Save Media Info using BRM (SAVMEDIBRM) 263
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
264 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
Save Media Info using BRM (SAVMEDIBRM) 265
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Save access paths (ACCPTH)
Specifies whether the logical file access paths that are dependent on the physical files being saved are
also saved. The access paths are saved only if all members on which the access paths are built are
included in this save operation. Informational messages are sent indicating the number of logical file
access paths saved with each physical file. This parameter does not save logical objects; it only controls
the saving of the access paths. Information on the restoring of saved access paths is in the Backup and
Recovery Book.
*SYSVAL
The system value QSAVACCPTH determines whether to save the logical file access paths that are
dependent on the physical files that are being saved.
*NO Only those objects specified on the command are saved. No logical file access paths are saved.
*YES The specified physical files and all eligible logical files access paths over them are saved.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
266 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
Save Media Info using BRM (SAVMEDIBRM) 267
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
268 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
Save Media Info using BRM (SAVMEDIBRM) 269
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
270 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Saving Media Information for a Control Group
SAVMEDIBRM DEV(*MEDCLS) MEDPCY(FULL) OPTION(*OBJ) CTLGRP(CG01)
Save Media Info using BRM (SAVMEDIBRM) 271
This command saves object level information for control group CG01. The recovery information can be
written to any device that supports the media class specified in the media policy FULL.
Example 2: Saving Media Information and Access Paths
SAVMEDIBRM DEV(*MEDCLS) MEDPCY(FULL) OPTION(*OBJ) ACCPTH(*YES)
This command saves all BRMS object level recovery information including access paths to any device that
supports the media class specified in the media policy FULL.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
272 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Object using BRM (SAVOBJBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Object using BRM (SAVOBJBRM) command allows you to save individual objects or a group of
objects that are in the same library.
For job queues, message queues and logical files, only the object definitions are saved, not the contents.
The contents of output queues can be saved using SPLFDTA(*ALL), otherwise, only the output queue
object definition is saved. The contents of save files can be saved using SAVFDTA(*YES), otherwise, only
the save file object definition is saved.
The system saves the specified objects by writing a copy of each object on tape, or in a save file. The
objects are not affected in the system unless the command specifies that the storage should be freed.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVOBJ or SAVCHGOBJ commands to use this command.
2. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (ASPDEV) parameter.
3. You must have either the *SAVSYS special authority or you must have:
v Read authority for, or be the owner of, each library specified.
v Object existence authority for each object in the library.
4. When saving to a save file, only one library can be specified.
5. No object being saved can be changed by a job that is running at the time the save operation occurs
unless save-while-active is used.
6. *NONE must be specified for the Spooled file data (SPLFDTA) parameter if the value for the Target
release (TGTRLS) parameter resolves to a release prior to V5R4M0. Use backup spooled file lists to
save of spooled files for restore to target releases prior to V5R4M0.
7. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
© Copyright IBM Corp. 1998, 2006 273
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
LIB Library Name Required,
Positional 1
OBJ Object Single values: *ALL
Other values (up to 50 repetitions): Generic name, name
Required,
Positional 2
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 3
OBJTYPE Object type Single values: *ALL
Other values (up to 50 repetitions): Character value
Optional
MBR Member Generic name, name, *ALL Optional
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 4
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
SAVACT Save active *NO, *LIB, *SYSDFN, *SYNCLIB Optional
SAVACTWAIT Save active wait time Element list Optional
Element 1: Object locks 0-99999, 120, *NOMAX
Element 2: Pending record
changes
0-99999, *LOCKWAIT, *NOMAX, *NOCMTBDY
Element 3: Other pending
changes
0-99999, *LOCKWAIT, *NOMAX
274 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
SAVACTMSGQ Save active message queue Qualified object name Optional
Qualifier 1: Save active
message queue
Name, *NONE, *WRKSTN
Qualifier 2: Library Name, *LIBL, *CURLIB
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
PRECHK Object pre-check *NO, *YES Optional
ACCPTH Save access paths *SYSVAL, *NO, *YES Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
SAVFDTA Save contents of save files *YES, *NO Optional
SPLFDTA Spooled file data *NONE, *ALL Optional
OBJJRN Journaled objects *NO, *YES Optional
OMITOBJ Objects to omit Values (up to 300 repetitions): Element list Optional
Element 1: Object Qualified object name
Qualifier 1: Object Generic name, name, *NONE, *ALL
Qualifier 2: Library Generic name, name, *ALL
Element 2: Object type Character value
ASPDEV Auxiliary storage pool Name, *SYSBAS, *CURASPGRP Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *PERM, *NONE Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Library (LIB)
Specifies which library contains the objects that you want to save.
This a required parameter.
Top
Save Object using BRM (SAVOBJBRM) 275
Object (OBJ)
Specifies the names of one or more objects or the generic name of each group of objects to be saved. All
the objects must be in the library specified on the Library (LIB) parameter. If the Object type (OBJTYPE)
parameter is not specified, all the object types listed in the description of that parameter are saved,
provided they are in the specified library and have the specified names.
This is a required parameter.
You can type multiple values for this parameter.
Single values
*ALL All the objects in the specified library are saved, depending on the values specified on the Object
type (OBJTYPE) parameter.
Other values (up to 50 repetitions)
object-name
Specify one or more names of specific objects to save. Both generic names and specific names can
be specified in the same command.
generic*-object-name
Specify one or more generic names of groups of objects in the specified library to be saved. A
generic name is a character string that contains one or more characters followed by an asterisk
(*). If an * is not specified with the name, the system assumes that the name is a complete object
name.
Top
Device (DEV)
Specifies the device or devices to be used by this command.
Single values
*MEDCLS
Devices for this policy or control group are selected based on device types that support the
density for the media class specified in the media policy. The *MEDCLS special value is used for
devices that are part of a device pool, such as several systems that share a single or set of
devices. Devices are specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value. The Parallel Device Resource (PRLRSC) parameter must be *NONE. BRMS will attempt to use the
maximum number of devices that can be allocated for a save operation. If you want to use more than one
device for a parallel save operation the *MEDCLS must only be specified once and the PRLRSC
minimum and maximum responses must be greater than one.
Other values (up to 4 repetitions)
Specifies the name of the devices to be used for the save operation. the specified device name must
already be in the BRMS device table.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
276 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: Multiple systems can share the use of a tape device or a media library device (MLB). When the
device is a tape device (not an MLB device), BRMS can help you manage the use of the stand alone
device by multiple systems if you indicate the device is shared.
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
*NONE
There is no device for this save operation. Save files are used to store the saved data. Data in a
save file created with device *NONE will never be copied by BRMS. It is intended for online
access only.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can
be specified.
Note: PRLRSC must be *NONE when DEV is *NONE.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can be
specified.
Top
Object type (OBJTYPE)
Specifies the types of system objects to save. For a complete list of object types that can be saved, move
the cursor to Object type (OBJTYPE) parameter and press the F4 key.
You can type multiple values for this parameter.
Single values
*ALL All object types that are specified by name and are in the specified library are saved. If *ALL is
also specified on the Object (OBJ) parameter, then all the objects in the library that are of the
types that can be saved are saved.
Other values (up to 50 repetitions)
object-type
Specify the value for each of the types of object that are saved such as command (*CMD), file
(*FILE), or program (*PGM).
Top
Member (MBR)
Specifies the database file members that are saved. You can choose a specific member, a generic member
name or all members. To use the Member (MBR) parameter for a member or generic member, the Object
(OBJ) parameter cannot be *ALL or generic and the Object type (OBJTYPE) parameter must be *FILE.
*ALL All members are saved from the specified file.
Save Object using BRM (SAVOBJBRM) 277
member-name
Specify the name of the member to be saved from the given file.
generic*-member-name
Specify the generic name of the members to be saved from the specified file. A generic name is a
character string that contains one or more characters followed by an asterisk (*). If an * is not
specified with the name, the system assumes that the name is a complete member name.
Top
Media policy (MEDPCY)
Specifies the media policy that you want to use with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a parallel save operation.
Note: Transferring save files to tape does not support parallel operations.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel save.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
278 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
*NONE
No device resources are to be used. The save will be performed as a serial save. *NONE must be
specified when using a TSM or virtual tape device.
*AVAIL
Use any available devices up to the maximum of what was used for a save. Specifying this value
for the minimum will allow BRMS to use any available resources, but will complete using one
resource if only one is available at the start of the command.
1-32 Specify the minimum number of device resources to be used with this save command.
Element 2: Maximum Resources
Specifies the maximum number of device resources.
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices for the save operation. Specifying this value for the maximum will
allow BRMS to use any available resources but at a minimum the value specified in the minimum
element.
1-32 Specify the maximum number of device resources to be used with this save command.
Top
Save active (SAVACT)
Specifies if an object can be updated while it is being saved.
Note: If your system is in a restricted state and the SAVACT parameter is specified, the save operation is
performed as if SAVACT(*NO) was specified.
Note: If you are using the MONSWABRM command as part of an *EXIT special operation in a control
group, the Save while active field must have a value of *YES for the entry that you want to save while
active. The Monitor Save While Active (MONSWABRM) command reviews the save while active message
queue and looks for the message indicating the end of library synchronization. When synchronization is
detected, you can issue a command to the system.
*NO Objects that are in use are not saved. Objects cannot be updated while being saved.
*LIB Objects in a library can be saved while they are in use by another job. All of the objects in a
library reach a checkpoint together and are saved in a consistent state in relationship to each
other.
Note: Libraries with thousands of objects may be too large for this option.
*SYNCLIB
Objects in a library can be saved while they are in use by another job. All of the objects and all of
the libraries in the save operation reach a checkpoint together and are saved in a consistent state
in relationship to each other.
Note: Multiple checkpoints will occur when using *SYNCLIB with an incremental *ALLUSR
backup item if new libraries were added to the system since the last save because
synchronization is only within commands, not across libraries. New libraries are saved using
Save Library (SAVLIB) command. Changed libraries are saved using the Save Changed Object
(SAVCHGOBJ) command with a reference date and time that is the earliest occurance of either
Save Object using BRM (SAVOBJBRM) 279
that last full or last incremental backup. BRMS uses its own reference dates rather than those in
the object description information to protect incremental saves from being affected by native save
operations.
Note: The *SYNCLIB choice cannot be used for the *IBM save type.
Note: If the libraries are being saved to save files or to TSM servers, each library is saved
individually rather than as a group. Synchronization messages are therefore sent individually for
each library rather than for the libraries as a group and synchronization is only within one
library, not across libraries.
*SYSDFN
Objects in a library can be saved while they are in use by another job. Objects in a library may
reach checkpoints at different times and may not be in a consistent state in relationship to each
other.
Note: Specifying this value eliminates some size restrictions and can allow a library to be saved
that could not be saved with SAVACT(*LIB).
Top
Save active wait time (SAVACTWAIT)
Specifies the amount of time to wait for an object that is in use, or for transactions with pending changes
to reach a commit boundary, before continuing the save operation.
Element 1: Object locks
Specifies the amount of time to wait for the object to become available for each object that is in use. If an
object remains in use for the specified time, the object is not saved.
For each object that is in use, specifies the amount of time to wait for the object to become available. If an
object remains in use for the specified time, the object is not saved.
120 The system waits up to 120 seconds for each individual object lock before continuing the save
operation.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for each individual object lock before continuing the save
operation. Valid values range from 0 through 99 999.
Element 2: Pending record changes
For each group of objects that are checkpointed together, specifies the amount of time to wait for
transactions with pending record changes to reach a commit boundary. The Save active prompt
(SAVACT) parameter determines which objects are checkpointed together. If 0 is specified, all objects
being saved must be at commit boundaries. If any other value is specified, all objects that are journaled
to the same journals as the objects being saved must reach commit boundaries. If a commit boundary is
not reached in the specified time, the save operation is ended, unless the value *NOCMTBDY is specified.
*LOCKWAIT
The system waits up to the value specified on Element 1 for commit boundaries for record
changes.
*NOCMTBDY
The system will save objects without requiring transactions with pending record changes to reach
a commit boundary. Therefore, objects may be saved with pending transactions.
280 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If you restore an object that was saved with pending transactions, you cannot use the object until
you apply or remove journal changes (APYJRNCHG or RMVJRNCHG command) to reach
commit boundaries. You will need all journal receivers that contain information about the
pending transactions to apply or remove the changes. Until you apply or remove the changes,
any future save of that object will include the pending transactions, even if you do not specify
*NOCMTBDY.
Restrictions:
1. The value of the Target release (TGTRLS) parameter must be *CURRENT, V5R3M0 or later
release to use *NOCMTBDY.
2. The value of the Object detail (OBJDTL) parameter must be *YES or *MBR to use
*NOCMTBDY.
3. The name of the saved library cannot begin with the letter Q or # when using *NOCMTDBY.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for transactions with pending record changes to reach a
commit boundary. Valid values range from 0 through 99 999.
Element 3: Other pending changes
For each library, specifies the amount of time to wait for transactions with other pending changes to
reach a commit boundary. Other pending changes include the following:
v Data Definition Language (DDL) object level changes for that library.
v Any API commitment resource that was added without the option to allow normal save processing.
For more information, see the Add Commitment Resource (QTNADDCR) API in the System API
Reference information in the iSeries Information Center at
http://www.ibm.com/eserver/iseries/infocenter.
If a commit boundary is not reached for a library in the specified time, the library is not saved.
*LOCKWAIT
The system waits up to the value specified on Element 1 for the types of transactions that are
listed above to reach a commit boundary.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for the types of transactions that are listed above to reach a
commit boundary. Valid values range from 0 through 99 999.
Top
Save active message queue (SAVACTMSGQ)
Specifies the message queue that the save operation uses to notify the user that the checkpoint processing
for the library is complete. A separate message is sent for each library to be saved when the *SYSDFN or
*LIB value is specified on the Save active (SAVACT) parameter. When the *SYNCLIB value is specified
on the Save active (SAVACT) parameter, one message is sent for all libraries in the save operation.
Note: When multiple save operations are generated by BRMS, then one message is sent for each
command generated.
Save Object using BRM (SAVOBJBRM) 281
This parameter can be used to save the objects at a known, consistent boundary to avoid additional
recovery procedures following a restore operation. Applications can be stopped until the checkpoint
processing complete message is received.
Qualifier 1: Save active message queue
*NONE
No notification message is sent.
*WRKSTN
The notification message is sent to the work station message queue.
message-queue-name
Specify the name of the message queue that the notification message is sent to.
Qualifier 2: Library
*LIBL The library list is used to locate the message queue.
*CURLIB
The current library for the job is used to locate the message queue. If no library is specified as the
current library for the job, the QGPL library is used.
library-name
Specify the name of the library where the message queue is located.
Restrictions: If MONSWABRM is used to monitor the save while active message queue, and LIB(*MSGQ)
is specified for the MONSWABRM, the name specified here must match the name on the MSGQ
parameter for the MONSWABRM command.
MONSWABRM always uses the message queue from library QUSRBRM.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
282 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Save Object using BRM (SAVOBJBRM) 283
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
284 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Object pre-check (PRECHK)
Specifies whether the save operation ends if any of the selected objects cannot be saved.
*NO The save operation for a library continues, saving only those objects that can be saved.
*YES If after all specified objects are checked, one or more objects cannot be saved, the save operation
for a library ends before any data is written. If multiple libraries are specified, the save operation
continues with the next library.
Top
Save access paths (ACCPTH)
Specifies whether the logical file access paths that are dependent on the physical files being saved are
also saved. The access paths are saved only if all members on which the access paths are built are
included in this save operation. Informational messages are sent indicating the number of logical file
access paths saved with each physical file. All physical files on which an access path is built must be in
the same library. This parameter does not save logical objects; it only controls the saving of the access
paths. Information on the restoring of saved access paths is in the Backup and Recovery Book.
Attention: If the based-on physical files and the logical files are in different libraries, the access paths are
saved. However, if the logical files and the based-on physical files are in different libraries and the logical
files or physical files do not exist at restore time (such as during disaster recovery or the files were
deleted) the access paths are not restored. They are rebuilt. For the fastest possible restore operation for
logical files and the based-on physical files must be in the same library and must be saved at the same
time.
*SYSVAL
The system value QSAVACCPTH determines whether to save the logical file access paths that are
dependent on the physical files that are being saved.
*NO Only those objects specified on the command are saved. No logical file access paths are saved.
*YES The specified physical files and all eligible logical files access paths over them are saved.
Top
Save Object using BRM (SAVOBJBRM) 285
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Save contents of save files (SAVFDTA)
Specifies for save file objects, whether the description of a save file, or both the description and the
contents of a save file, are saved on the tape or in another save file.
*YES The description and contents of save files are saved.
*NO Only the description of a save file is saved.
Top
Spooled file data (SPLFDTA)
Specifies whether to save the spooled file data and attributes for saved output queues. The saved spooled
files and attributes can be viewed after the save using the Work with Saved Spooled Files
(WRKSPLFBRM) command.
286 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*NONE
Specifies no spooled file data or attributes are saved with saved output queues.
*ALL Specifies all available spooled file data and attributes are saved with saved output queues.
Top
Journaled objects (OBJJRN)
This parameter is ignored for SAVOBJBRM. Since the command does not support *INCR and *CUML
backup types, the OBJJRN parameter does not apply.
Top
Omit object (OMITOBJ)
Specifies the objects to be excluded from the save operation. Up to 300 objects or generic object values
can be specified.
If the OMITOBJ parameter is not specified, no objects are excluded from the save operation.
*NONE
No objects are excluded from the save operation.
Element 1: Object
Qualifier 1: Object
*ALL Objects in the specified libraries are excluded, depending on the value specified for the object
type.
generic*-object-name
Specify the generic name of the object. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all objects with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete object name.
object-name
Specify the name of the object that will be excluded from the save operation.
Qualifier 2: Library
*ALL The specified objects are excluded from all libraries that are part of the save operation.
generic*-library-name
Specify the generic name of the library. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all libraries with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete library name.
library-name
Specify the name of the library that contains the object to be excluded from the save operation.
Element 2: Object type
*ALL All object types are excluded from the save operation, depending on the value specified for the
object name.
Save Object using BRM (SAVOBJBRM) 287
object-type
Specify the type of the object to be excluded from the save operation.
Top
Auxiliary storage pool device (ASPDEV)
Use this parameter to specify the auxiliary storage pools from which libraries and objects can be included
in the save operation.
*SYSBAS
Specifies libraries or objects from only the system (1) and basic user auxiliary storage pools (2-32)
are included in the save.
*CURASPGRP
Specifies libraries or objects from only the auxiliary storage pool group currently set for the job
are included in the save. Libraries or objects from the system (1) and basic user auxiliary storage
pools (2-32) are omitted from the save.
auxiliary-storage-pool-device-name
Specifies libraries or objects from the named auxiliary storage pool device are included in the
save operation. This must be the name of a primary or secondary auxiliary storage pool. Libraries
or objects from the system (1) and basic user auxiliary storage pools (2-32) are omitted from the
save.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
288 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
Save Object using BRM (SAVOBJBRM) 289
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
290 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Save Object using BRM (SAVOBJBRM) 291
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
292 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Saving Objects of a Particular Type
SAVOBJBRM LIB(MYLIB) OBJ(AP* GLMST) DEV(TAP09)
OBJTYPE(*FILE) MEDPCY(FULL)
This command saves selected file objects whose names begin with the letters ’AP’ and the file object
named GLMST from library MYLIB using device TAP09.
Example 2: Saving Generic Objects from a Library
SAVOBJBRM LIB(MYLIB) OBJ(DIST*) DEV(TAP09) MEDPCY(FULL)
This command saves all objects that begin with the letters ’DIST’ from library MYLIB using device
TAP09.
Example 3: Saving Objects of a Particular Type in Parallel
SAVOBJBRM LIB(MBALIB) OBJ(AP* GLMST) DEV(MLB01)
OBJTYPE(*FILE) MEDPCY(FULL) PRLRSC(2 2)
In this example all objects are saved that begin with AP or the object called GLMST if they are object type
*FILE. The objects are found in library MBALIB. They will be saved to two device resources in MLB01.
Example 4: Saving Objects of a Particular Type on an Auxiliary Storage Pool Device
SAVOBJBRM LIB(MYLIB) OBJ(AP* GLMST) DEV(TAP09) OBJTYPE(*FILE)
MEDPCY(FULL) ASPDEV(PRIMETIME)
This command saves selected file objects whose names begin with the letters ’AP’ and the file object
named GLMST from library MYLIB which reside on auxiliary storage pool device PRIMETIME using
device TAP09.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
Save Object using BRM (SAVOBJBRM) 293
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
294 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Object List using BRM (SAVOBJLBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Object List using BRM (SAVOBJLBRM) command saves objects that are specified in a BRMS
object list. It does not save the list itself.
For job queues, message queues and logical files, only the object definitions are saved, not the contents.
The contents of output queues can be saved using SPLFDTA(*ALL), otherwise, only the output queue
object definition is saved. The contents of save files can be saved using SAVFDTA(*YES), otherwise, only
the save file object definition is saved.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVOBJ or SAVCHGOBJ commands to use this command.
2. You must have *USE authority to any auxiliary storage pool device specified for the Auxiliary storage
pool (ASPDEV) parameter.
3. You must have either the *SAVSYS special authority or you must have:
v Read authority for, or be the owner of, each library specified.
v Object existence authority for each object in the library.
4. When saving to a save file, only one library can be specified.
5. No object being saved can be changed by a job that is running at the time the save operation occurs
unless save-while-active is used.
6. *NONE must be specified for the Spooled file data (SPLFDTA) parameter if the value for the Target
release (TGTRLS) parameter resolves to a release prior to V5R4M0. Use backup spooled file lists to
save of spooled files for restore to target releases prior to V5R4M0.
7. *NONE must be specified for the SPLFDTA parameter if the value for the Save type (SAVTYPE)
parameter is *CUML or *INCR.
8. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
You can save data to a Tivoli Storage Manager (TSM) server using this command. To save data to a TSM
server, the following conditions must be met:
© Copyright IBM Corp. 1998, 2006 295
v Only user data can be saved to TSM servers. BRMS does not allow *IBM type libraries to be saved
TSM servers. Also, BRMS does not allows IBM supplied libraries that are considered user data such as
QGPL, QUSRBRM, or QUSRSYS libraries to be saved TSM media.
v You can only specify only one device for the Device (DEV) parameter and this device must be of
category *NET or *APPC.
v You can specify DEV(*MEDCLS) with the Location (LOC) parameter to identify the *NET or *APPC
category device to be used.
v You can specify a media policy name for the Media policy (MEDPCY) parameter if the media policy
uses specifies *ADSM (TSM server) for the Media class attribute. Alternately you can specify
MEDPCY(*NONE) in which can you must also specify *ADSM for the Media class (MEDCLS), Move
policy (MOVPCY) and Secure volume (VOLSEC) parameters.
v The Sequence number (SEQNBR) parameter must be *END.
v The Save to save file (SAVF), Mark volumes for duplication (MARKDUP) and Mark history for
duplication (MARKHST) parameters must be *NO. If *MEDPCY is specified for these parameters,
then the respective value for the Save to save file attribute, Mark volumes for duplication attribute
and Mark history for duplication attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NO.
v The Required volumes (MINVOL) parameter must be *NONE. If SAVF(*MEDPCY) is specified then
the value for the Required volumes attribute of the media policy specified by the Media policy
(MEDPCY) parameter must be *NONE.
v If *SYNCLIB is specified for the Save active (SAVACT) parameter each library is saved individually
rather than as a group. Synchronization messages are therefore sent individually for each library rather
than for the libraries as a group and synchronization is only within one library, not across libraries.
Top
Parameters
Keyword Description Choices Notes
OBJL Object list Name Required,
Positional 1
DEV Device Single values: *NONE
Other values (up to 4 repetitions): Name, *MEDCLS
Required,
Positional 2
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 3
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *NONE, *AVAIL
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
SAVACT Save active *LIB, *NO, *SYSDFN, *SYNCLIB Optional
SAVACTWAIT Save active wait time Element list Optional
Element 1: Object locks 0-99999, 120, *NOMAX
Element 2: Pending record
changes
0-99999, *LOCKWAIT, *NOMAX, *NOCMTBDY
Element 3: Other pending
changes
0-99999, *LOCKWAIT, *NOMAX
SAVACTMSGQ Save active message queue Qualified object name Optional
Qualifier 1: Save active
message queue
Name, *NONE, *WRKSTN
Qualifier 2: Library Name, *LIBL, *CURLIB
OBJDTL Retain object detail *ERR, *MBR, *NO, *OBJ, *YES Optional
296 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
SAVTYPE Type of save *FULL, *CUML, *INCR Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
SEQNBR Sequence number 1-16777215, *END Optional
TGTRLS Target release Character value, *CURRENT Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
PRECHK Object pre-check *NO, *YES Optional
ACCPTH Save access paths *SYSVAL, *NO, *YES Optional
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
SAVFDTA Save contents of save files *YES, *NO Optional
SPLFDTA Spooled file data *NONE, *ALL Optional
REFDATE Reference date Character value, *REF Optional
REFTIME Reference time Character value, *REF Optional
OBJJRN Journaled objects *NO, *YES Optional
OMITOBJ Objects to omit Values (up to 300 repetitions): Element list Optional
Element 1: Object Qualified object name
Qualifier 1: Object Generic name, name, *NONE, *ALL
Qualifier 2: Library Generic name, name, *ALL
Element 2: Object type Character value
ASPDEV Auxiliary storage pool Name, *SYSBAS, *CURASPGRP Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *ADSM, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *ADSM, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
SAVF Save to save file *MEDPCY, *NO, *YES Optional
SAVFASP Save file ASP Character value, *MEDPCY, *SYSTEM Optional
SAVFEXP Retain save files Date, *MEDPCY, *NONE, *PERM Optional
MAXSTG ASP storage limit 1-99, *MEDPCY Optional
VOLSEC Secure volume *MEDPCY, *ADSM, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
Top
Object list (OBJL)
Specifies the name of the backup object list that you want BRMS to use during the save operation. Lists
identify groups of objects that you want to save together. Lists are added, changed or displayed using the
Work with Lists (WRKLBRM) command.
This is a required parameter.
Top
Save Object List using BRM (SAVOBJLBRM) 297
Device (DEV)
Specifies the device or devices to be used by this command.
Single values
*MEDCLS
Devices for this policy or control group are selected based on device types that support the
density for the media class specified in the media policy. The *MEDCLS special value is used for
devices that are part of a device pool, such as several systems that share a single or set of
devices. Devices are specified in the Work with Devices display.
Note: If you want to use more than one device for a serial save operation, the *MEDCLS can be repeated
up to four times, once for each device used, except for virtual tape devices which is limited to a single
value. The Parallel Device Resource (PRLRSC) parameter must be *NONE. BRMS will attempt to use the
maximum number of devices that can be allocated for a save operation. If you want to use more than one
device for a parallel save operation the *MEDCLS must only be specified once and the PRLRSC
minimum and maximum responses must be greater than one.
Other values (up to 4 repetitions)
Specifies the name of the devices to be used for the save operation. the specified device name must
already be in the BRMS device table.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Note: Multiple systems can share the use of a tape device or a media library device (MLB). When the
device is a tape device (not an MLB device), BRMS can help you manage the use of the stand alone
device by multiple systems if you indicate the device is shared.
You can save data to a TSM (ADSM) server using this command. You can only specify one TSM type
server in the list of devices or *MEDCLS, which must select a TSM server. The device type can either be
*APPC, which supports SNA network protocol, or *NET, which supports TCPIP protocol.
*NONE
There is no device for this save operation. Save files are used to store the saved data. Data in a
save file created with device *NONE will never be copied by BRMS. It is intended for online
access only.
device-name
Specify the names of one or more devices used for the save operation. If you are using more than
one device (up to a maximum of four), specify the names of the devices in the order in which
they are used.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can
be specified.
Note: PRLRSC must be *NONE when DEV is *NONE.
Note: When doing a serial save, only one media library device or one virtual tape device can be
specified. When doing a parallel save, multiple media library devices or virtual tape devices can be
specified.
Top
298 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Media policy (MEDPCY)
Specifies the media policy that you want to use with this save command.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
Note: If you specify *NONE, and you are saving data to a TSM (ADSM) server, you must specify
the *ADSM special value in the MOVPCY, MEDCLS and VOLSEC parameters which are part of
the media policy values for this save operation. You must still supply the additional media policy
values for the remaining parameters with *MEDPCY as the default. The TSM management class
STANDARD, and the TSM node *LCL, are used as default values for the save operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a parallel save operation.
Note: Transferring save files to tape does not support parallel operations.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel save.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
*NONE
No device resources are to be used. The save will be performed as a serial save. *NONE must be
specified when using a TSM or virtual tape device.
*AVAIL
Use any available devices up to the maximum of what was used for a save. Specifying this value
for the minimum will allow BRMS to use any available resources, but will complete using one
resource if only one is available at the start of the command.
Save Object List using BRM (SAVOBJLBRM) 299
1-32 Specify the minimum number of device resources to be used with this save command.
Element 2: Maximum Resources
Specifies the maximum number of device resources.
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices for the save operation. Specifying this value for the maximum will
allow BRMS to use any available resources but at a minimum the value specified in the minimum
element.
1-32 Specify the maximum number of device resources to be used with this save command.
Top
Save active (SAVACT)
Specifies if an object can be updated while it is being saved.
Note: If your system is in a restricted state and the SAVACT parameter is specified, the save operation is
performed as if SAVACT(*NO) was specified.
Note: If you are using the MONSWABRM command as part of an *EXIT special operation in a control
group, the Save while active field must have a value of *YES for the entry that you want to save while
active. The Monitor Save While Active (MONSWABRM) command reviews the save while active message
queue and looks for the message indicating the end of library synchronization. When synchronization is
detected, you can issue a command to the system.
*NO Objects that are in use are not saved. Objects cannot be updated while being saved.
*LIB Objects in a library can be saved while they are in use by another job. All of the objects in a
library reach a checkpoint together and are saved in a consistent state in relationship to each
other.
Note: Libraries with thousands of objects may be too large for this option.
*SYNCLIB
Objects in a library can be saved while they are in use by another job. All of the objects and all of
the libraries in the save operation reach a checkpoint together and are saved in a consistent state
in relationship to each other.
Note: Multiple checkpoints will occur when using *SYNCLIB with an incremental *ALLUSR
backup item if new libraries were added to the system since the last save because
synchronization is only within commands, not across libraries. New libraries are saved using
Save Library (SAVLIB) command. Changed libraries are saved using the Save Changed Object
(SAVCHGOBJ) command with a reference date and time that is the earliest occurance of either
that last full or last incremental backup. BRMS uses its own reference dates rather than those in
the object description information to protect incremental saves from being affected by native save
operations.
Note: The *SYNCLIB choice cannot be used for the *IBM save type.
Note: If the libraries are being saved to save files or to TSM servers, each library is saved
individually rather than as a group. Synchronization messages are therefore sent individually for
each library rather than for the libraries as a group and synchronization is only within one
library, not across libraries.
300 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SYSDFN
Objects in a library can be saved while they are in use by another job. Objects in a library may
reach checkpoints at different times and may not be in a consistent state in relationship to each
other.
Note: Specifying this value eliminates some size restrictions and can allow a library to be saved
that could not be saved with SAVACT(*LIB).
Top
Save active wait time (SAVACTWAIT)
Specifies the amount of time to wait for an object that is in use, or for transactions with pending changes
to reach a commit boundary, before continuing the save operation.
Element 1: Object locks
Specifies the amount of time to wait for the object to become available for each object that is in use. If an
object remains in use for the specified time, the object is not saved.
For each object that is in use, specifies the amount of time to wait for the object to become available. If an
object remains in use for the specified time, the object is not saved.
120 The system waits up to 120 seconds for each individual object lock before continuing the save
operation.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for each individual object lock before continuing the save
operation. Valid values range from 0 through 99 999.
Element 2: Pending record changes
For each group of objects that are checkpointed together, specifies the amount of time to wait for
transactions with pending record changes to reach a commit boundary. The Save active prompt
(SAVACT) parameter determines which objects are checkpointed together. If 0 is specified, all objects
being saved must be at commit boundaries. If any other value is specified, all objects that are journaled
to the same journals as the objects being saved must reach commit boundaries. If a commit boundary is
not reached in the specified time, the save operation is ended, unless the value *NOCMTBDY is specified.
*LOCKWAIT
The system waits up to the value specified on Element 1 for commit boundaries for record
changes.
*NOCMTBDY
The system will save objects without requiring transactions with pending record changes to reach
a commit boundary. Therefore, objects may be saved with pending transactions.
If you restore an object that was saved with pending transactions, you cannot use the object until
you apply or remove journal changes (APYJRNCHG or RMVJRNCHG command) to reach
commit boundaries. You will need all journal receivers that contain information about the
pending transactions to apply or remove the changes. Until you apply or remove the changes,
any future save of that object will include the pending transactions, even if you do not specify
*NOCMTBDY.
Restrictions:
Save Object List using BRM (SAVOBJLBRM) 301
1. The value of the Target release (TGTRLS) parameter must be *CURRENT, V5R3M0 or later
release to use *NOCMTBDY.
2. The value of the Object detail (OBJDTL) parameter must be *YES or *MBR to use
*NOCMTBDY.
3. The name of the saved library cannot begin with the letter Q or # when using *NOCMTDBY.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for transactions with pending record changes to reach a
commit boundary. Valid values range from 0 through 99 999.
Element 3: Other pending changes
For each library, specifies the amount of time to wait for transactions with other pending changes to
reach a commit boundary. Other pending changes include the following:
v Data Definition Language (DDL) object level changes for that library.
v Any API commitment resource that was added without the option to allow normal save processing.
For more information, see the Add Commitment Resource (QTNADDCR) API in the System API
Reference information in the iSeries Information Center at
http://www.ibm.com/eserver/iseries/infocenter.
If a commit boundary is not reached for a library in the specified time, the library is not saved.
*LOCKWAIT
The system waits up to the value specified on Element 1 for the types of transactions that are
listed above to reach a commit boundary.
*NOMAX
No maximum wait time exists.
wait-time
Specifies the time (in seconds) to wait for the types of transactions that are listed above to reach a
commit boundary. Valid values range from 0 through 99 999.
Top
Save active message queue (SAVACTMSGQ)
Specifies the message queue that the save operation uses to notify the user that the checkpoint processing
for the library is complete. A separate message is sent for each library to be saved when the *SYSDFN or
*LIB value is specified on the Save active (SAVACT) parameter. When the *SYNCLIB value is specified
on the Save active (SAVACT) parameter, one message is sent for all libraries in the save operation.
Note: When multiple save operations are generated by BRMS, then one message is sent for each
command generated.
This parameter can be used to save the objects at a known, consistent boundary to avoid additional
recovery procedures following a restore operation. Applications can be stopped until the checkpoint
processing complete message is received.
Qualifier 1: Save active message queue
*NONE
No notification message is sent.
302 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*WRKSTN
The notification message is sent to the work station message queue.
message-queue-name
Specify the name of the message queue that the notification message is sent to.
Qualifier 2: Library
*LIBL The library list is used to locate the message queue.
*CURLIB
The current library for the job is used to locate the message queue. If no library is specified as the
current library for the job, the QGPL library is used.
library-name
Specify the name of the library where the message queue is located.
Restrictions: If MONSWABRM is used to monitor the save while active message queue, and LIB(*MSGQ)
is specified for the MONSWABRM, the name specified here must match the name on the MSGQ
parameter for the MONSWABRM command.
MONSWABRM always uses the message queue from library QUSRBRM.
Top
Retain object detail (OBJDTL)
Specifies whether the object detail is kept in the BRMS database for the objects saved.
*ERR Error detail is kept in the BRMS backup history.
*MBR Object and member detail is kept in the BRMS backup history.
Note: Member level information is included with the object information for physical files, and
saved spooled file information is kept for saved output queues if *ALL was specified for the Save
spooled file data (SPLFDTA) parameter.
Note: This choice is the same as *YES.
*NO No object detail is kept in the BRMS backup history.
*OBJ Object detail is kept in the BRMS backup history. No member level information or saved spooled
file information is kept.
*YES Object detail is kept in the BRMS backup history.
Note: When *YES is specified, member level information is kept for physical files in addition to
object information, and saved spooled file information is kept for saved output queues if *ALL
was specified for the Save spooled file data (SPLFDTA) parameter.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
Save Object List using BRM (SAVOBJLBRM) 303
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
Type of save (SAVTYPE)
Specifies whether all objects in a library are to be saved or only those objects that have changed.
Note: If a backup includes new libraries and BRMS has no history of a full backup of these libraries, then
a full backup will be performed regardless of the type of incremental specified.
*FULL Save all objects in the library.
*CUML
Only save items that have changed. *CUML indicates that the incremental save includes all
objects that have been changed since the last full save.
*INCR
Only save changed items. *INCR indicates that the incremental save includes all objects that have
been changed since the last incremental save.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
304 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation. If you are saving to a BRMS
volume that is expired, BRMS will begin writing information at the beginning of the volume, even
though you have specified *END. If you are saving to a BRMS volume, BRMS will redirect the output to
begin at the logical end of the output volume (after the end of the last active file), depending on the
output device that you are using. For example, a 3490 device can write to any sequence number whereas
a 6525 device can only write to sequence number 1 or *END.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number (1-16,777,215)
Specify the sequence number of the file to be used for the save operation.
Top
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to restore the objects being saved.
*CURRENT
The objects are to be restored on a system that is running the same release of the operating
system currently running on your system. For example, if V5R2M0 is running on the system,
*CURRENT means that you intend to restore the objects on a system with V5R2M0 installed. The
objects can also be restored on a system with any subsequent release of the operating system
installed.
Save Object List using BRM (SAVOBJLBRM) 305
*PRV The objects are to be restored on a system that is running on the previous release with
modification level 0 of the operating system. For example if V5R2M0 is running on your system,
*PRV means you intend to restore the objects on a system with V5R1M0 installed. The object can
also be restored on a system with any subsequent release of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
target-release
Specify the release in the format VxRxMx, where Vx is the version, Rx is the release, and Mx is
the modification level. For example, V5R2M0 is version 5, release 2, modification level 0.
The objects can be restored on a system with the specified release or with any subsequent release
of the operating system installed.
Note: Not all objects can be targeted to another release. Objects that are new to a release typically
cannot be saved to a previous release.
Valid values depend on the current version, release, and modification level, and they change with
each new release. If you specify a release-level that is earlier than the earliest release level
supported by this command, an error message is sent indicating the earliest supported release.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Object pre-check (PRECHK)
Specifies whether the save operation ends if any of the selected objects cannot be saved.
*NO The save operation for a library continues, saving only those objects that can be saved.
306 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*YES If after all specified objects are checked, one or more objects cannot be saved, the save operation
for a library ends before any data is written. If multiple libraries are specified, the save operation
continues with the next library.
Top
Save access paths (ACCPTH)
Specifies whether the logical file access paths that are dependent on the physical files being saved are
also saved. The access paths are saved only if all members on which the access paths are built are
included in this save operation. Informational messages are sent indicating the number of logical file
access paths saved with each physical file. All physical files on which an access path is built must be in
the same library. This parameter does not save logical objects; it only controls the saving of the access
paths. Information on the restoring of saved access paths is in the Backup and Recovery Book.
Attention: If the based-on physical files and the logical files are in different libraries, the access paths are
saved. However, if the logical files and the based-on physical files are in different libraries and the logical
files or physical files do not exist at restore time (such as during disaster recovery or the files were
deleted) the access paths are not restored. They are rebuilt. For the fastest possible restore operation for
logical files and the based-on physical files must be in the same library and must be saved at the same
time.
*SYSVAL
The system value QSAVACCPTH determines whether to save the logical file access paths that are
dependent on the physical files that are being saved.
*NO Only those objects specified on the command are saved. No logical file access paths are saved.
*YES The specified physical files and all eligible logical files access paths over them are saved.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
Save Object List using BRM (SAVOBJLBRM) 307
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Save contents of save files (SAVFDTA)
Specifies for save file objects, whether the description of a save file, or both the description and the
contents of a save file, are saved on the tape or in another save file.
*YES The description and contents of save files are saved.
*NO Only the description of a save file is saved.
Top
Spooled file data (SPLFDTA)
Specifies whether to save the spooled file data and attributes for saved output queues. The saved spooled
files and attributes can be viewed after the save using the Work with Saved Spooled Files
(WRKSPLFBRM) command if *YES or *MBR is also specified for the Retain object detail (OBJDTL)
parameter.
Note: Spooled file data is saved only when *FULL is specified for the Type of save (SAVTYPE)
parameter.
*NONE
Specifies no spooled file data or attributes are saved with saved output queues.
*ALL Specifies all available spooled file data and attributes are saved with saved output queues.
Top
Reference date (REFDATE)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the date of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-date
Specify a date for this save operation to use as a beginning point for this incremental save.
Top
308 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Reference time (REFTIME)
Works in conjunction with an incremental (save changed objects) save performed under BRMS control.
*REF Uses the time of the last full BRMS save for this save operation as the beginning point for this
incremental save.
reference-time
Specify a time in hour, minute, second (hhmmss) format for this save operation to use as a
beginning point for this incremental save.
Top
Journaled objects (OBJJRN)
Specifies whether to save changed objects that are currently being journaled and that have been journaled
since the date and time specified on the REFDATE and REFTIME parameters.
*NO Objects being journaled are not saved. If journaling was started after the specified date and time,
the changed objects or changed database file members are saved. The date and time of the last
journal start operation can be shown by using the Display Object Description (DSPOBJD)
command.
*YES Objects whose changes are entered in a journal are saved.
Note: The value entered applies only to save types of *INCR or *CUML. For save type *FULL, this value
is always treated as *YES.
Top
Omit object (OMITOBJ)
Specifies the objects to be excluded from the save operation. Up to 300 objects or generic object values
can be specified.
If the OMITOBJ parameter is not specified, no objects are excluded from the save operation.
*NONE
No objects are excluded from the save operation.
Element 1: Object
Qualifier 1: Object
*ALL Objects in the specified libraries are excluded, depending on the value specified for the object
type.
generic*-object-name
Specify the generic name of the object. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all objects with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete object name.
object-name
Specify the name of the object that will be excluded from the save operation.
Qualifier 2: Library
Save Object List using BRM (SAVOBJLBRM) 309
*ALL The specified objects are excluded from all libraries that are part of the save operation.
generic*-library-name
Specify the generic name of the library. A generic name is a character string of one or more
characters followed by the asterisk (*); for example, ABC*. The asterisk (*) substitutes for any
valid characters. A generic name specifies all libraries with names that begin with the generic
prefix, for which the user has authority. If an asterisk is not included with the generic (prefix)
name, the system assumes it to be the complete library name.
library-name
Specify the name of the library that contains the object to be excluded from the save operation.
Element 2: Object type
*ALL All object types are excluded from the save operation, depending on the value specified for the
object name.
object-type
Specify the type of the object to be excluded from the save operation.
Top
Auxiliary storage pool device (ASPDEV)
Use this parameter to specify the auxiliary storage pools from which libraries and objects can be included
in the save operation.
*SYSBAS
Specifies libraries or objects from only the system (1) and basic user auxiliary storage pools (2-32)
are included in the save.
*CURASPGRP
Specifies libraries or objects from only the auxiliary storage pool group currently set for the job
are included in the save. Libraries or objects from the system (1) and basic user auxiliary storage
pools (2-32) are omitted from the save.
auxiliary-storage-pool-device-name
Specifies libraries or objects from the named auxiliary storage pool device are included in the
save operation. This must be the name of a primary or secondary auxiliary storage pool. Libraries
or objects from the system (1) and basic user auxiliary storage pools (2-32) are omitted from the
save.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
310 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MOVPCY parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Media movement is controlled by TSM server specifications.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
If this save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the MEDCLS parameter, since a TSM server
controls the use of media in this case, not BRMS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
The save operation uses media that is selected and controlled by TSM server specifications.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
Save Object List using BRM (SAVOBJLBRM) 311
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Save to save file (SAVF)
Specifies whether the output from this save operation is saved to a save file.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify SAVF(*MEDPCY), then the value of the
Save to save file field in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy) (MEDPCY parameter, you cannot specify
*MEDPCY in this parameter.
*NO Output from this save operation is not saved to a save file.
*YES Output from this save operation is saved to a save file.
Top
Save file ASP (SAVFASP)
Specifies the system (1) or basic user auxiliary storage pool (2-32) to which a save file is created as a
result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
312 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SYSTEM
The save file is saved to the system (1) auxiliary storage pool.
save-file-ASP-name
Specify the name of the auxiliary storage pool to which you are saving the save file.
save-file-ASP-number
Specify the system (1) or basic user auxiliary storage pool number (2-32) for the save file that is
created as a result of the save operation.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
Retain save files (SAVFEXP)
Specifies how long save files are to be kept that are created as a result of this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
Save files generated from the save operation are not kept.
*PERM
Save files generated from the save operation are kept permanently.
expiration-date
Specify the date that indicates how long save files created from this save operation are to be kept.
Top
ASP storage limit (MAXSTG)
Specifies the maximum percentage auxiliary storage pool (ASP) utilization that is acceptable during a
save operation. For example, an entry of 90 would mean that a save process would continue until the
auxiliary storage pool utilization exceeded 90%. If the upper limit is reached, the save process is stopped
and a message sent to the BRMS log.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
storage-limit
Specify the maximum auxiliary storage pool utilization limit.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
Save Object List using BRM (SAVOBJLBRM) 313
If the save operation that you are performing is saving data to a device of category *NET or *APPC, you
must specify the special value *ADSM (TSM server) for the VOLSEC parameter, since a TSM server
controls volume security in this case, not BRMS
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ADSM
Volume security is controlled by TSM server specifications.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
314 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Examples
Example 1: Saving All Objects in a List
SAVOBJLBRM OBJL(LISTO) DEV(*MEDCLS *MEDCLS *MEDCLS) MEDPCY(FULL)
This command saves all objects in the object list LISTO to any three devices that support the density
specified in the media class in the media policy FULL.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Save Object List using BRM (SAVOBJLBRM) 315
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
316 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save Save Files using BRM (SAVSAVFBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save Save Files using BRM (SAVSAVFBRM) command saves save files created during BRMS
processing to tape.
Various parameters allow you to select which save files that you want to copy to tape. For instance, you
can select a range of save file creation dates to include in the save files that you want to copy to tape
with further qualification of control group and media class.
You can schedule the SAVSAVFBRM command through the system job scheduler, through another job
scheduler or on demand.
Expired save files that are not waiting to be copied to tape are deleted when the SAVSAVFBRM
command processes.
Data in a save file created with device *NONE will not be copied to tape unless a device is specified on
the Device (DEVICE) parameter when using this command.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVSAVFDTA command to use this command. The SAVSAVFBRM
command does not support the transfer of saved file data to TSM (ADSM) media.
2. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
CTLGRP Control group Single values: *ALL
Other values (up to 50 repetitions): Generic name, name,
*NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM
Optional
© Copyright IBM Corp. 1998, 2006 317
Keyword Description Choices Notes
LIB Library Single values: *ALL
Other values (up to 50 repetitions): Generic name, name,
*MEDINF
Optional
MEDCLS Media class Generic name, name, *ALL Optional
PERIOD Time period for save files Element list Optional
Element 1: Start time and
date
Element list
Element 1: Beginning time Time, *AVAIL
Element 2: Beginning date Character value, *BEGIN, *CURRENT
Element 2: End time and
date
Element list
Element 1: Ending time Time, *AVAIL
Element 2: Ending date Character value, *END, *CURRENT
DEV Device Single values: *SAVF
Other values (up to 4 repetitions): Name, *MEDCLS
Optional
MEDPCY Media policy Name, *SAVF, *SYSPCY Optional
SEQNBR Sequence number 1-16777215, 1, *END Optional
ENDOPT End of tape option *UNLOAD, *LEAVE, *REWIND Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
CLEAR Clear *AFTER, *ALL, *NONE, *SAVF Optional
COMPACT Data compaction *SAVF, *DEV, *NO Optional
ALWADLSAVE Add subsequent saves *NO, *YES Optional
Top
Control group (CTLGRP)
Specifies the name of the control group that was processed to create the save files that you want to copy
to removable media.
Single values
*ALL Save files created by any control group that meet the other parameters are copied to removable
media.
Other values (up to 50 repetitions)
*NONE
No control group is used to copy save files to removable media.
generic*-control-group-name
Specify a generic control group name. For example, specifying WEEK* would cause all control
groups whose names begin with WEEK to be included in the control groups whose save files are
copied to removable media.
control-group-name
Specify the control group whose save files are copied to removable media. You can specify up to
50 control group names.
Note: You can specify an existing control group name, or a name that you want to be associated
with the save operation, even if the name is not an existing control group. The control group
name is saved with the media information and can be used with the control group name
parameter in recovery processing by control group.
318 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Library (LIB)
Specifies the name of the library that is saved in save files that you want to copy to removable media.
Single values
*ALL All libraries that are saved in save files and meet the other parameter specifications are copied to
removable media.
Other values (up to 50 repetitions)
*MEDINF
You want to copy BRMS media information saved in save files to removable media. The
QUSRBRM library contains the BRMS media information.
generic*-library-name
Specify a generic library name. For example, specifying APP* would cause all libraries whose
names begin with APP to be included in the libraries that are saved in save files to be copied to
removable media.
library-name
Specify the name of the library that is saved in save files that you want to copy to removable
media. You can specify up to 50 library names.
Top
Media class (MEDCLS)
Specifies the name of the media class associated with the control groups whose save files you want to
move to removable media.
*ALL Save files with any media class that meet the other parameter specification are copied to
removable media.
generic*-media-class-name
Specify that the media class name is generic. For example, specifying CART* would cause all
media classes whose names begin with CART to be included in the media classes associated with
save files that are copied to removable media.
media-class-name
Specify the media class associated with save files that you want to copy to removable media.
Top
Time period for save files (PERIOD)
Specifies the period of time for which the save files are selected to save to tape.
Element 1: Start time and date
One of the following is used to specify the beginning creation time at which or after save files are
included. Any save files created before the specified time and date are not included in the selected save
files for copy to removable media.
Element 1: Beginning time
Save Save Files using BRM (SAVSAVFBRM) 319
*AVAIL
Any time that is available for the beginning date is included.
begin-time
Specify the beginning time for the specified beginning date that indicates which save files are to
be included.
The time is specified in 24-hour format and can be specified with or without a time separator:
v Without a time separator, specify a string of 4 or 6 digits (hhmm or hhmmss) where hh=hours,
mm=minutes and ss=seconds. Hours, minutes, and seconds must each be exactly 2 digits
(using leading zeros if necessary).
v With a time separator, specify a string of 5 or 8 digits where the time separator specified for
your job is used to separate the hours, minutes, and seconds. If you enter this command from
the command line, the string must be enclosed in apostrophes. If a time separator other than
the separator specified for your job is used, this command will fail.
Element 2: Beginning date
One of the following is used to specify the beginning date on which or after which the save files must
have been created. Any entries created before the specified date are not included in the copy to tape.
*BEGIN
Save files from the beginning of the save file media content information are copied to tape.
*CURRENT
Save files with a current date creation date and between the specified beginning and ending
times (if specified) are copied to tape.
begin-date
Specify the beginning date. The date must be specified in the job date format.
Element 2: End time and date
One of the following is used to specify the ending time before which save files are included. Any save
files created after the specified time and date are not included in the items selected for copy to tape.
Element 1: Ending time
*AVAIL
Any time that is available for the ending date is included.
end-time
Specify the ending time for the specified ending date that indicates which save files are to be
included.
Element 2: Ending date
One of the following is used to specify the ending date on which or before which the save files must
have been created. Any save files created after the specified date are not included in the copy to tape
operation.
*END The save files to the end of the save file media content information are copied to tape.
*CURRENT
The save files with a current day creation date is the last day for which save files are copied to
tape.
end-date
Specify the ending date. The date must be specified in the job date format.
320 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Device (DEV)
Specifies the name of the device to which you want to copy selected save files.
Single values
*SAVF Save files are copied to the device specified when the save files were created.
Other values (up to 4 repetitions)
*MEDCLS
BRMS determines the media class specified for the save file. Once the media class is determined,
a device that supports that media class is selected to copy the save file.
device-name
Specify the device to which you want to copy the selected save files.
Top
Media policy (MEDPCY)
Specifies the name of the media policy that BRMS should use when it selects media to contain the save
file data.
*SAVF Media is assigned using the media policy specified when the save files were created.
*SYSPCY
Media is assigned using the media policy specified in the system policy.
media-policy
Specify the media policy that you want to use for selected save files.
Top
Sequence number (SEQNBR)
Specifies, when tape is used, the sequence to use for the save operation.
Note: If you are saving to a BRMS volume that is expired, BRMS will begin writing information at the
beginning of the volume, even though you have specified *END.
Note: If you are saving to a BRMS BRMS will redirect the output to begin at the logical end of the output
volume (after the end of the last active file), depending on the output device that you are using. For
example, a 3490 device can write to any sequence number whereas a 6525 device can only write to
sequence number 1 or *END.
1 The first file is to be sequence number 1.
*END The save operation begins after the sequence number of the last active file on the volume.
file-sequence-number
Specify the sequence number of the file to be used for the save operation. Sequence numbers can
range from 1 to 16,777,215.
Top
Save Save Files using BRM (SAVSAVFBRM) 321
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
Note: If no objects are saved, the volume is not opened and the ENDOPT parameter is ignored.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*UNLOAD
The volume is automatically rewound and unloaded after the save operation ends.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*REWIND
The volume is rewound, but not unloaded.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*SAVF Uses the value specified when the save file was created.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. If the operation
322 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
cannot proceed because the first volume is uncleared, an inquiry message is sent to the system
operator, allowing him to end the operation or to specify that the currently selected volume be
cleared so the operation can continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*SAVF Uses the data compaction value specified when the save file was created.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
*NO No data compaction is performed.
Top
Allow subsequent saves (ALWADLSAVE)
Specifies whether you intend to save save files to tape in subsequent save file operations.
*NO You do not intend to save save files on subsequent save operations. The save files will be deleted
from the system when maintenance is run after these save files are saved to tape or when these
save files expire.
*YES You intend to save save files on subsequent save operations. The save files will not be deleted
from the system when maintenance is run. If you specify this value, you must run a subsequent
SAVSAVFBRM command using ALWADLSAVE(*NO) to enable removal of these save files from
the system.
Top
Examples
Example 1: Saving Save Files to Removable Media
SAVSAVFBRM CTLGRP(BACK*) MEDCLS(QIC1000) BEGIN(*AVAIL ’1/1/03’)
END(*AVAIL *CURRENT)
This command saves all backup control groups whose name begins with the BACK that created save files
with media class QIC1000. The device to which the save files are to be saved is specified in the save file
itself and is thus not specified in the command. The save files that are to be included are save files that
Save Save Files using BRM (SAVSAVFBRM) 323
were created between 1/1/2003 and the current date. Creation time does not matter. Expired save files
that are not waiting to be copied to tape are deleted when the command processes.
Top
Error messages
*ESCAPE Messages
BRM1500
Save file processing is canceled.
BRM1502
Save file processing is canceled.
BRM1504
Save file processing is canceled.
BRM1506
Save file processing is canceled.
BRM1520
Operation canceled by user reply.
BRM1646
Save operation canceled.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1941
Operation canceled because of reply to check of expired media.
BRM2265
Errors occurred initiating session using device &1.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
324 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Save System using BRM (SAVSYSBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Save System using BRM (SAVSYSBRM) command saves a copy of the Licensed Internal Code and
the QSYS library in a format compatible with the installation of the operating system. It does not save
objects from any other library. In addition, it saves security and configuration objects that can also be
saved using the Save Security Data (SAVSECDTA) and Save Configuration (SAVCFG) commands.
Virtual tape media and devices can be used with this command. The following restrictions apply to the
use of virtual media and virtual devices.
v The Device (DEV) parameter is limited on only one device or *MEDCLS special value for serial
operations.
v Execute authority is required to the Load or Unload Image Catalog (LODIMGCLG) command.
v *CHANGE authority is required to the image catalogs.
v Execute (*X) authority is required to each directory in the image catalog path name.
v Read, write, execute (*RWX) authority is required to each image file in the parent directory that will be
loaded or mounted.
v *USE authority is required to the virtual devices using the image catalogs.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the SAVSYS command to use this command.
2. You must have *SAVSYS special authority to use this command.
3. You must have *USE authority to all online auxiliary storage pool devices.
4. All subsystems will be ended when using the SAVSYSBRM command. You must have job control
(*JOBCTL) authority to use the ENDSYS or the ENDSBS command.
5. Volumes created using this command that will be used for installation should be initialized with a
media class with a density that is supported by the current alternate IPL device. If this is not done,
the current IPL volume will have to be changed to a device that supports the density of the created
SAVSYSBRM volumes before installation begins.
6. Volumes created using the SAVSYSBRM command cannot be used for automatic installation.
7. The media class associated with the device must specify Shared media *NO.
8. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
DEV Device Values (up to 4 repetitions): Name, *MEDCLS Required,
Positional 1
© Copyright IBM Corp. 1998, 2006 325
Keyword Description Choices Notes
MEDPCY Media policy Name, *NONE, *SYSPCY Required,
Positional 2
DTACPR Data compression *DEV, *NO, *YES Optional
COMPACT Data compaction *DEV, *NO Optional
CTLGRP Control group Name, *NONE, *ARCGRP, *BKUGRP, *SYSGRP, *SYSTEM Optional
ENDOPT End of tape option *REWIND, *LEAVE, *UNLOAD Optional
USEOPTBLK Use optimum block size *BKUPCY, *DEV, *NO, *YES Optional
OMIT Omit Single values: *BKUPCY, *NONE
Other values (up to 3 repetitions): *CFG, *SECDTA,
*USRASPAUT
Optional
CLEAR Clear *NONE, *AFTER, *ALL Optional
STRCTLSBS Start controlling subsystem *YES, *NO Optional
EXPDATE Expiration date Date, *MEDPCY, *PERM Optional
MOVPCY Move policy Name, *MEDPCY, *NONE Optional
MEDCLS Media class Character value, *MEDPCY, *SYSPCY Optional
LOC Location Name, *MEDPCY, *ANY, *HOME Optional
VOLSEC Secure volume *MEDPCY, *NO, *YES Optional
MINVOL Required volumes 1-9999, *MEDPCY, *NONE Optional
MARKDUP Mark volumes for
duplication
*MEDPCY, *NO, *YES Optional
MARKHST Mark history for duplication *MEDPCY, *NO, *YES Optional
ASPDEV Auxiliary storage pool Name, *ALLAVL, *CURASPGRP, *SYSBAS Optional
Top
Device (DEV)
Specifies the names of the devices used for the save system operation. Each device name must already be
known on the system in the BRMS device table. If multiple devices are specified, they must use
compatible media classes. If more than one device is used, specify the names of the devices in the order
in which they are used. A maximum of four device names can be specified.
This is a required parameter.
You can enter multiple values for this parameter.
device-name
Specify the name of the device or devices that you want to use for the system save operation.
Note: Only one media library device or one virtual tape device can be specified.
*MEDCLS
Any device that supports the media class specified in the media policy for this save can be used
for this save operation.
Top
326 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Media policy (MEDPCY)
Specifies the media policy for the volumes you are creating as a result of processing a system save.
Media policies are used to determine:
v The type of retention to use, such as days, date or version, for media used in control group processing.
v The move policy to use with this media policy.
v The media class to use.
v Whether or not to use save files.
v The type of retention to use, such as days or date for save files created in control group processing.
The media policy you specify must be a media policy that is in the BRMS media policy table.
This a required parameter.
*NONE
No media policy is specified for this save operation. Media policy values must be supplied with
the save command for each parameter that has a default of *MEDPCY.
*SYSPCY
The media policy specified in the system policy is assigned to output volumes from this save
operation.
media-policy
Specify the name of the media policy that you want to use with this save operation.
Top
Data compression (DTACPR)
Specifies whether data compression is used.
*DEV If the save is to tape and the target device supports compression, hardware compression is
performed. Otherwise, no data compression is performed.
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compression is performed.
*YES If the target device supports compression, hardware compression is performed. if compression is
not supported, software compression is performed.
Top
Data compaction (COMPACT)
Specifies whether data compaction is performed.
*DEV Device data compaction is performed if the data is saved to tape and all devices specified on the
Device (DEV) parameter support the compaction feature.
Save System using BRM (SAVSYSBRM) 327
Note: If *DEV is specified on both the Data compression (DTACPR) parameter and the Data
compaction (COMPACT) parameter, only device data compaction is performed if device data
compaction is supported on the device. Otherwise, data compression is performed if supported
on the device.
If *YES is specified on the Data compression (DTACPR) parameter and *DEV is specified on the
Data compaction (COMPACT) parameter, both device data compaction and device data
compression are performed if supported on the device.
*NO No data compaction is performed.
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to associate with the objects saved by this
command. The control group name is stored with the media information and can be used with the
Control group (CTLGRP) parameter on other BRMS commands to filter the media information or recover
saved objects by control group.
Note: None of the attributes of the control group are used for the save.
If you are using version control for the items you are saving, this save operation will be recorded as part
of the specified version control. Version control is specified in the media policy associated with this
control group and can be reviewed by using the Work with Media Policies display.
*NONE
Do not specify a control group name for this command.
*ARCGRP
The name of the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group used to save all user data.
*SYSGRP
The name of the default system control group used to save all system data.
*SYSTEM
The name of the default system control group used to save the entire system.
control-group-name
Specify the name of the control group to be assigned to the items you are saving.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
save operation ends. If more than one volume is included, this parameter applies only to the last volume
used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*REWIND
The volume is automatically rewound, but not unloaded, after the operation has ended.
328 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*UNLOAD
The volume is automatically rewound and unloaded after the operation ends.
Top
Use optimum block size (USEOPTBLK)
Specifies whether or not the optimum block size is used for the save operation.
*BKUPCY
Use the value from the backup policy for the Use optimum block size parameter.
*DEV Use the value specified on the Work with Devices display for the Use optimum block size
parameter.
*NO The optimum block size supported by the device is not used. Save commands use the default
block size supported by all device types. The tape volume can be duplicated to any media format
using the Duplicate Tape (DUPTAP) command or the Duplicate Media using BRM
(DUPMEDBRM) command.
*YES The optimum block size supported by the device is used for Save commands. If the block size
used is larger than a block size that is supported by all device types then:
v Performance may improve.
v The tape file that is created is only compatible with a device that supports the block size used.
Commands such as Duplicate Tape (DUPTAP) and Duplicate Media using BRM
(DUPMEDBRM) do not duplicate files unless the files are being duplicated to a device which
supports the same block size that was used.
v The value for the Data Compression (DTACPR) parameter is ignored.
Top
Omit (OMIT)
Specifies whether configuration objects, security objects or additional basic user auxiliary storage pool
information should be omitted during a system save.
Single values
*BKUPCY
Use the values specified in the items to omit for the *SAVSYS special value in the backup policy.
*NONE
No omissions are to be made for this system save operation.
Other values (up to 3 repetitions)
*CFG All configuration objects are to be omitted for this system save operation.
*SECDTA
All security objects are to be omitted for this system save operation.
*USRASPAUT
Omit the BRMS save of additional authority information for objects in basic user auxiliary storage
pools (2-32). This authority information includes the object owner, authority list and primary
group.
Save System using BRM (SAVSYSBRM) 329
Top
Clear (CLEAR)
Specifies whether uncleared volumes or save files encountered during the save operation are
automatically cleared.
*NONE
None of the uncleared volumes or save files encountered during the save operation are
automatically cleared. If the save operation cannot proceed because an uncleared volume is
encountered, an inquiry message is sent to the operator, allowing the ending of the save
operation, or specifying that the currently selected volume be cleared so the operation can
continue.
If a save file is not cleared, the inquiry message is sent to the work station message queue for an
interactive job, or to the operator for a batch job. All volumes used to perform the save operation
should be cleared, or the save file must be empty, before the save command is issued.
*AFTER
All the uncleared volumes after the initial volume are automatically cleared. This option is not
valid for save or restore operations to a save file. If the operation cannot proceed because the first
volume is uncleared, an inquiry message is sent to the system operator, allowing him to end the
operation or to specify that the currently selected volume be cleared so the operation can
continue.
*ALL All the uncleared volumes or save files encountered during the save operation are automatically
cleared. If tapes are used and a sequence number is specified, the volume is cleared and, starting
with that sequence number, all volumes following the first volume are cleared.
Top
Start controlling subsystem (STRCTLSBS)
Specifies whether the controlling subsystem should be automatically restarted when the system save is
complete.
*YES The controlling subsystem is restarted when the save operation is complete.
*NO The controlling subsystem is not restarted when the save operation is complete.
Top
Expiration date (EXPDATE)
Specifies the expiration that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*PERM
Output volumes from this save operation are assigned a permanent expiration.
330 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
expiration-date
Specify an expiration date with or without date separators that will be assigned to output
volumes from this save operation.
Top
Move policy (MOVPCY)
Specifies the move policy that you want to use for output volumes created as a result of this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is not a move policy associated with the output volumes that are created as a result of this
save operation.
move-policy
Specify a move policy that will be assigned to output volumes from this save operation.
Top
Media class (MEDCLS)
Specifies the media class that you want to use for selection of output volumes used in this save
operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is not a media class associated with the output volumes that are selected for this save
operation.
*SYSPCY
The value for the media class in the system policy will used to select output volumes for this
save operation.
media-class
Specify a media class that will be used to select output volumes for this save operation.
Top
Location (LOC)
Specifies the location that you want to use for selection of output volumes used in this save operation.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Save System using BRM (SAVSYSBRM) 331
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*ANY Volumes from any location are selected as output volumes for this save operation.
*HOME
Volumes from the home location are selected as output volumes for this save operation.
location
Specify the location from which volumes are selected as output volumes for this save operation.
Top
Secure volume (VOLSEC)
Specifies whether you want to apply volume security to volumes in this media class. Volumes that are
secured can only be read by users with the special authorities *ALLOBJ or *SAVSYS.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volume security has not been applied to this media class. Volumes that do not have volume
security can be read by anyone.
*YES Only users with special authorities *ALLOBJ or *SAVSYS can read media volumes in this media
class.
Top
Require volumes (MINVOL)
Specifies the minimum number of expired volumes that must be present before any save can be done
using this media policy. The value can also be checked by user jobs using the Check Expired Media for
BRM (CHKEXPBRM) command.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NONE in this parameter. If you specify MINVOL(*MEDPCY), then the value
of the Required volumes field in the referenced media policy must be *NONE.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NONE
There is no check done to determine the minimum number of required volumes before a save
operation begins.
number-of-volumes
Specify the number of expired media volumes that must be available before any BRMS save
operation will begin. The number can range from 1 to 9999.
Top
332 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Mark volumes for duplication (MARKDUP)
Specifies whether media volumes will be marked for duplication. When *YES is selected, all volumes
used during a save operation are marked for duplication. You can use VOL(*SEARCH) on the Duplicate
Media using BRM command to duplicate the saved items after the save has completed.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKDUP(*MEDPCY), then the value of
the Mark for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO Volumes written to during a save operation will not be marked for duplication.
*YES Volumes written to during the save operation will be marked for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether history items will be marked for duplication. When *YES is selected, all history items
created during a save operation are marked for duplication. You must use VOL(*SCHHST) on the
Duplicate Media using BRM command to duplicate the saved items.
Note: If the save operation that you are performing is saving data using media of class *ADSM (TSM
server), you must specify *NO in this parameter. If you specify MARKHST(*MEDPCY), then the value of
the Mark history for duplication attribute in the referenced media policy must be *NO.
*MEDPCY
The value for this parameter is specified in the media policy that is specified in the Media policy
(MEDPCY) parameter of this save command.
Note: If *NONE is specified in the Media policy (MEDPCY) parameter, you cannot specify
*MEDPCY in this parameter.
*NO History items created during the save operation will not be marked for duplication.
*YES History items created during the save operation will be marked for duplication.
Top
Auxiliary storage pool device (ASPDEV)
Use this parameter to specify the auxiliary storage pools from which libraries and objects can be included
in the save operation.
*ALLAVL
Specifies the save of the backup item is to include objects from the system (1) and basic user
auxiliary storage pools (2-32) and all available primary, secondary and UDFS auxiliary storage
pools.
*CURASPGRP
Specifies libraries or objects from only the auxiliary storage pool group currently set for the job
are included in the save. Libraries or objects from the system (1) and basic user auxiliary storage
pools (2-32) are omitted from the save.
Save System using BRM (SAVSYSBRM) 333
*SYSBAS
Specifies libraries or objects from only the system (1) and basic user auxiliary storage pools (2-32)
are included in the save.
auxiliary-storage-pool-device-name
Specifies libraries or objects from the named auxiliary storage pool device are included in the
save operation. This must be the name of a primary or secondary auxiliary storage pool. Libraries
or objects from the system (1) and basic user auxiliary storage pools (2-32) are omitted from the
save.
Top
Examples
SAVSYSBRM DEV(TAP09) MEDPCY(SAVSYS)
This command saves a copy of the Licensed Internal Code and the QSYS library. In this example, you are
saving to device TAP09 using a media policy named SAVSYS.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
334 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Set Media Controls using BRM (SETMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Set Media Controls using BRM (SETMEDBRM) command has two distinct parts, a set of input
controls and a set of output controls.
Input controls pertain only to volumes from which data is being retrieved or read.
Output controls start with the Media class (MEDCLS) parameter continue through the Text (TEXT)
parameter, and pertain to volumes on which data is being written. For example, if you plan to perform a
CPYTOTAP operation, you can use the SETMEDBRM command beforehand to assign a move policy and
retention period for the volumes that are used.
The controls you specify with SETMEDBRM remain in effect for your job until they are reset or otherwise
changed by another SETMEDBRM command. To see control values that are currently in effect, type the
SETMEDBRM command on a command line and press F4.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
LABEL Input controls Element list Optional
Element 1: File label Character value, *SAME, *ANY, *NONE
Element 2: Select version 1-999, *SAME, *CURRENT
ALWCNV Allow conversion *SAME, *NO, *YES Optional
MEDCLS Media class Character value, *SAME, *NONE Optional
MOVPCY Move policy Name, *SAME, *NONE Optional
VOLSEC Secure volume *SAME, *NO, *YES Optional
RET Retention Element list Optional
Element 1: Retention type *SAME, *DATE, *DAYS, *NONE, *PERM, *VERSION
Element 2: Retain media Character value, *SAME
FILEGRP File group Name, *SAME, *NONE, *ARCGRP, *BKUGRP, *SYSGRP,
*SYSTEM
Optional
GRPTYPE File group type Name, *SAME, *ARC, *BKU, *NONE Optional
MARKDUP Mark volumes for
duplication
*SAME, *NO, *YES Optional
MARKHST Mark history for duplication *SAME, *NO, *YES Optional
TEXT Text Character value, *SAME, *NONE Optional
Top
© Copyright IBM Corp. 1998, 2006 335
Input controls (LABEL)
Specifies the file label and version selection controls enforced for your job on subsequent input operations
involving media. These controls remain in effect for your job until they are reset or otherwise changed by
another SETMEDBRM command.
Element 1: File label
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*ANY File label, version selection controls apply to any file subsequently processed for input by this job.
*NONE
No file label, version selection controls are in effect for this job.
file-label
File label, version selection controls apply only to those files whose labels match the file label
specified here.
Element 2: Select version
In addition to the file label, you can specify which version of the file to use. BRMS uses the file label and
version specified here along with its inventory of media content to determine which volume should be
mounted. If the volume is not found, a message is issued to indicate this.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*CURRENT
The most recent version of the file is to be used.
version-number
Specify which version of the file relative to the *CURRENT version should be mounted. For
example, version 1 means the version taken just prior to the *CURRENT version.
Top
Allow conversion (ALWCNV)
Specifies whether conversion controls are enforced for your job on subsequent input operations involving
media. These controls remain in effect for your job until they are reset or otherwise changed by another
SETMEDBRM command.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NO Do not convert ASCII data, if found on the media, to EBCDIC.
*YES Convert ASCII data, if found on the media, to EBCDIC.
Top
Media class (MEDCLS)
Specifies the type of media to be used when output operations require media. The media class that you
specify here is used by BRMS to control subsequent mount operations. These controls remain in effect for
your job until they are reset or otherwise changed by another SETMEDBRM command.
336 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NONE
No media class enforcement should be done.
media-class
Specify the name of a media class. Only media of this class is allowed to be used when output
operations require media.
Top
Move policy (MOVPCY)
You can specify which move policy should be used for media once it has been written on by your job.
This value remains in effect for your job until it is reset or otherwise changed by another SETMEDBRM
command.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NONE
The volume will not be assigned a move policy.
move-policy
Specify the name of a move policy which will be used to control the physical movement of media
once your job writes data on it. This move policy is not assigned when the media already has a
move policy in effect.
Top
Secure volume (VOLSEC)
Specifies whether the volume is secured against subsequent read operations. Volumes that are secured
can only be read by users with the special authorities *ALLOBJ or *SAVSYS. This value remains in effect
for your job until it is reset or otherwise changed by another SETMEDBRM command.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NO The media is not secured. Media that is not secured can be read by anyone.
*YES The media is secured. Only users with special authorities *ALLOBJ or *SAVSYS can read secured
media.
Top
Retention (RET)
Specifies the type of retention that you want to use for this volume. Certain Retention type specifications
require additional Retain media detail. The Retention type parameter specifies the type of retention and
the Retain media parameter specifies a number or a date as appropriate with the specified Retention type.
For instance, if Retention type is specified as *VERSION and Retain media is 4, then 4 versions of the
information on the media will be managed by BRMS.
Element 1: Retention type
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
Set Media Controls using BRM (SETMEDBRM) 337
*DATE
You want to assign a retention date. Dates are specified in job date format with or without date
separators. BRMS does not allow media that is assigned the specified retention date to expire
until the date passes.
*DAYS
You want to assign a retention period measured in days, which begins when data is written on
the media. An expiration date is calculated based on the number of days specified. BRMS does
not allow media with this retention to expire until the date passes.
*NONE
No retention type is assigned to the volume.
*PERM
You want to permanently keep the data. BRMS does not allow media containing *PERM data to
expire.
Note: If you specify *PERM, Retain media specifications are is ignored.
*VERSION
You want to keep a selected number of versions for this file on media. BRMS does not allow
media with this retention to expire until the number of versions in the BRMS inventory exceeds
the number of versions specified.
Element 2: Retain media
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
retention-date
Specify the retention date when the Retention type (RET) parameter is *DATE.
number-of-days
Specify the number of days when the Retention type is *DAYS.
number-of-versions
Specify the number of versions when the Retention type is *VERSION.
Top
File group (FILEGRP)
Specifies the file group that you want to use with the current SETMEDBRM command.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NONE
No file group name should be assigned.
file-group
Specify the name of the file group to which the data being written belongs.
*ARCGRP
The data belongs to the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The data belongs to the default backup user data control group.
*SYSGRP
The data belongs to the default system data control group.
338 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*SYSTEM
The data belongs to the default backup entire system control group.
Top
File group type (GRPTYPE)
Specifies the type of file group to which the data being written belongs.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*ARC The file group type is an archive file group type.
Note: *ARC is not a special value, but rather indicates that this is an archive file group type.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU The file group type is a backup file group type.
Note: *BKU is not a special value, but rather indicates that this is a backup file group type.
*NONE
No file group type should be assigned.
file-group-type
Specify the name of the file group type to which the data being written belongs. An example file
group type is QBRMBKUP which indicates that it is a backup control group file group type.
Top
Mark volumes for duplication (MARKDUP)
Specifies whether to mark the volumes for duplication after they have been duplicated.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NO Do not mark volumes for duplication.
*YES Mark volumes for duplication.
Top
Mark history for duplication (MARKHST)
Specifies whether to mark the history items for duplication after they have been duplicated.
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NO Do not mark the history items for duplication.
*YES Mark the history items for duplication.
Top
Text (TEXT)
Specifies the text that briefly describes the data being written. This text can be displayed in the BRMS
media inventory.
Set Media Controls using BRM (SETMEDBRM) 339
*SAME
The previous SETMEDBRM specification for this value, if any, is to remain in effect.
*NONE
No text is specified.
text Specify no more than 50 characters of text, enclosed in apostrophes.
Top
Examples
Example 1: Using Input Controls
SETMEDBRM LABEL(*ANY 1) ALWCNV(*YES)
This command sets the input controls so that any file with a version number 1 greater than the most
current version is read. If ASCII data is found, convert it to EBCDIC.
Example 2: Using Output Controls
SETMEDBRM MEDCLS(QIC1000) MOVPCY(OFFSITE) RET(*DATE ’3/3/03’)
This command sets the output controls so that output operations will use media class QIC1000, a move
policy of OFFSITE and a retention date of 3/3/2003 will be assigned to any volumes produced while
these output controls are in effect.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
340 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Set Retrieve Controls for BRM (SETRTVBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Set Retrieve Controls for BRM (SETRTVBRM) command can be used to change the way that retrieve
operations work when performed by your job.
The controls you specify with SETRTVBRM remain in effect for the duration of your job or until they are
reset or otherwise changed by another SETRTVBRM command. The controls you specify with this
command are not kept when the job ends. To see control values that are currently in effect, type the
SETRTVBRM command on a command line and press F4.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The BRMS Advanced feature (Option 2) is required to use this command.
2. You can retrieve data from a TSM server device by using this command. You can only specify one
TSM device of *MEDCLS, which must select a TSM device. The TSM device selected can either be
*APPC, which supports SNA, or *NET, which supports TCP/IP.
3. *ALLOBJ special authority is required to use any value other than *NONE for the ALWOBJDIF
parameter.
4. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
5. You can select only one virtual tape device for serial retrieve operations. In addition, only one
*MEDCLS can be specified when using media classes which specify a virtual tape device density.
Top
Parameters
Keyword Description Choices Notes
DEV Retrieve device Single values: *SAME
Other values (up to 4 repetitions): Character value
Optional,
Positional 1
PRLRSC Parallel device resources Element list Optional
Element 1: Minimum
resources
1-32, *SAV, *AVAIL, *NONE
Element 2: Maximum
resources
1-32, *MIN, *AVAIL
RECALL Retrieve confirmation Element list Optional
Element 1: Interactive
operation
*SAME, *DELAY, *NONE, *NOTIFY, *RTVPCY, *SBMJOB,
*VERIFY
Element 2: Batch operation *SAME, *DELAY, *NONE, *NOTIFY, *RTVPCY, *VERIFY
RTVAUT Retrieve authorization *SAME, *ADD, *ALL, *CHANGE, *DLT, *OBJEXIST,
*OBJMGT, *OBJOPR, *READ, *RTVPCY, *UPD, *USE
Optional
ENDOPT End of tape option *SAME, *LEAVE, *REWIND, *RTVPCY, *UNLOAD Optional
RSTOPT Option *SAME, *ALL, *FREE, *NEW, *OLD, *RTVPCY Optional
© Copyright IBM Corp. 1998, 2006 341
Keyword Description Choices Notes
ALWOBJDIF Allow object differences Single values: *SAME, *ALL, *NONE, *RTVPCY
Other values (up to 4 repetitions): *AUTL, *FILELVL,
*OWNER, *PGP
Optional
STG ASP high storage threshold 1-95, *SAME, *ASP, *RTVPCY, *SYS Optional
RET Retrieved object retention 0-9999, *SAME, *ARC, *NOMAX, *RTVPCY Optional
EXTEND Extend retention on usage 0-9999, *SAME, *RTVPCY Optional
RESET Reset days used counter *SAME, *NO, *RTVPCY Optional
Top
Retrieve device (DEV)
Specifies the device name to be used for retrieve operations. You must use a single device for retrieve
processing.
You can restore data from a TSM (ADSM) server using this command. You can only specify one TSM
type server or *MEDCLS, which must select a TSM server. The device selected can either be *APPC,
which supports SNA network protocol, or *NET, which supports TCPIP protocol.
Single values
*SAME
The previous specification for this value, if any, is used.
Other values (up to 4 repetitions)
*MEDCLS
BRMS determines the media class of the media on which the requested item is saved. Once the
media class is determined,, a device supporting the density specified in the media class is
selected to retrieve the requested save item or items.
device-name
Specify the name of the device that is to be used for retrieve operations.
Top
Parallel device resources (PRLRSC)
Specifies the minimum and maximum number of device resources to be used in a restore operation.
Element 1: Minimum Resources
Specifies the minimum number of device resources required for a parallel restore.
Note: If a Media Library Device (MLB) is being used and the required resources are not available, the
command will wait for the MLB to become available for a time period specified by the user. The wait
time is determined by the value specified on the *MLB device description for INLMNTWAIT. If a *TAP
device is being used and the required resources are not available, the command will fail.
Note: Transferring save files to tape does not support parallel operations.
*SAV Specifies that the same number of device resources used for the save will be used for the restore.
If the save was a serial save, then the restore will also be serial.
342 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*AVAIL
Use any available devices up to the maximum specified. Specifying this value for the minimum
will allow BRMS to use any available resources, but will complete using one resource if only one
is available at the start of the command.
*NONE
No device resources are to be used. The restore will be performed as a serial restore.
1-32 Specify the minimum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Element 2: Maximum Resources
*MIN Uses the value specified for the minimum number of device resources.
*AVAIL
Use any available devices. Specifying this value for the maximum will allow BRMS to use any
available resources but at a minimum use the value specified in the minimum element.
1-32 Specify the maximum number of device resources to be used with this restore command, up to
the maximum of what was used for the save.
Top
Retrieve confirmation (RECALL)
Specifies how retrieve operations are processed in an interactive job or a batch job.
Element 1: Interactive operation
*SAME
The previous specification for this value, if any, is used.
*DELAY
You want to postpone retrieve operations. These objects can be retrieved later using the Resume
Retrieve using BRM (RSMRTVBRM) command.
*NONE
You do not want BRMS to perform retrieve operations.
*NOTIFY
The object is to be retrieved immediately. Status messages indicate that the retrieve operation is
taking place.
*RTVPCY
The value from the retrieve policy is used for this value.
*SBMJOB
You want the retrieved object to be retrieved using a batch job.
*VERIFY
A message is sent for each object that is retrieved. You can proceed with the retrieve operation,
delay or cancel it.
Element 2: Batch operation
*SAME
The previous specification for this value, if any, is used.
*DELAY
You want to postpone retrieve operations. These objects can be retrieved later using the Resume
Retrieve using BRM (RSMRTVBRM) command.
Set Retrieve Controls for BRM (SETRTVBRM) 343
*NONE
You want to bypass retrieve processing.
*NOTIFY
The object is to be retrieved immediately. Status messages indicate that the retrieve operation is
taking place.
*RTVPCY
The value specified in the retrieve policy is used.
*VERIFY
A message is sent for each object that is retrieved. You can proceed with the retrieve operation,
delay or cancel it.
Top
Retrieve authorization (RTVAUT)
Specifies the minimum authority required to allow BRMS to process a retrieve request. The value
specified in the Retrieve authorization (RTVAUT) parameter is checked against the authority level of the
user making the request. The authority list is checked at the time of the retrieve. If the user’s authority
level to the requested object is equal to or greater than the authority level specified in the Retrieve
authorization (RTVAUT) parameter, then BRMS allows the object to be retrieved. If the user’s authority
to an object is less than the authority specified in the Retrieve authorization (RTVAUT) parameter, then
the retrieve request does not take place.
For example, if the value in the Retrieve authorization (RTVAUT) parameter is *READ and the user has
*OBJEXIST authority to the object, then BRMS will retrieve the requested object since the user’s authority
to the object is greater than the minimum authority specified in the retrieve policy. If the value in the
Retrieve authorization (RTVAUT) parameter is *OBJEXIST and the user has *READ authority for the
requested object, the retrieve request will not be processed since the user’s authority is less than the
minimum required authority specified in the retrieve policy.
*SAME
The previous specification for this value, if any, is used.
*ADD Add authority is checked.
*ALL Object operational authority, object management authority, object existence authority and all data
authority for the object are checked regardless of the object type.
*CHANGE
Object operational authority and all data authority for the object are checked regardless of the
object type.
*DLT Delete authority is checked.
*OBJEXIST
Object existence authority, which provides the authority to control object ownership and
existence, is checked. These authorities are necessary for a user who wants to delete, free storage,
save, retrieve or transfer ownership of an object. (If a user has the special save system (*SAVSYS)
authority, he does not need object existence authority.)
*OBJMGT
Object management authority, which provides the authority to manage the access and availability
of an object, is checked. A user with object management authority can grant (and revoke) the
authority that he has, as well as move and rename objects, and add members to database files.
*OBJOPR
Object operational authority, which provides authority to manage the access and availability of an
object, is checked. Object operational authority has no data authorities associated with it.
344 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*READ
Read authority is checked.
*RTVPCY
The value from the retrieve policy is used for this value.
*UPD Update authority is checked.
*USE Object operational authority and read authority are checked regardless of the object type.
Top
End of tape option (ENDOPT)
Specifies, when tape is used, what positioning operation is automatically done on the volume after the
retrieve operation ends. If more than one volume is included, this parameter applies only to the last
volume used; all other volumes are rewound and unloaded when the end of the volume is reached.
If you specify *LEAVE and the device is a shared device, the device will not be varied off after the save
operation. If you specify *LEAVE and the device is not a shared device, the device will be varied off after
the save operation.
*SAME
The previous specification for this value, if any, is used.
*LEAVE
The volume does not rewind or unload after the operation ends. It remains at the current position
on the device.
*REWIND
The volume is automatically rewound but not unloaded after the retrieve operation ends.
*RTVPCY
The value from the retrieve policy is used for this value.
*UNLOAD
The volume is automatically rewound and unloaded after the retrieve operation ends.
Top
Option (RSTOPT)
Specifies which objects are retrieved, depending on whether the objects exist in a library on the system.
*SAME
The previous specification for this value, if any, is used.
*ALL All the objects in the saved library are retrieved to the library. Old objects on volume or in a save
file replace the current versions in the library on the system. Objects not having a current version
are added to the library on the system. Objects presently in the library, but not on the media,
remain in the library.
*FREE The saved objects are retrieved only if they exist in the system library with their space freed. The
saved version of each object is retrieved in the system in its previously freed space. This option
retrieves objects that had their space freed when they were saved. If any saved objects are no
longer part of the current version of the library, or if the space is not free for any object, the
object is not retrieved. The retrieve operation continues, and all of the freed objects are retrieved.
*NEW Only the objects in the saved library that do not exist in the current version of the library on the
system are added to the library. Only objects not known to the library on the system are
retrieved; known objects are not retrieved. This option retrieves objects that were deleted after
Set Retrieve Controls for BRM (SETRTVBRM) 345
they were saved or that are new to this library. If any saved objects have a version already in the
library on the system, they are not retrieved, and an informational message is sent for each one,
but the retrieve operation continues.
*OLD Only the objects in the library having a saved version are retrieved; that is, the version of each
object currently in the library is replaced by the saved version. Only objects known to the library
are retrieved. If any saved objects are no longer part of the online version of the library, they are
not added to the library; an informational message is sent for each one, but the retrieve
continues.
*RTVPCY
The value from the retrieve policy is used for this value.
Top
Allow object differences (ALWOBJDIF)
Specifies whether differences are allowed between the saved objects and the restored objects. These
differences include:
v Authorization list: The authorization list of an object on the system is different than the authorization
list of an object from the save operation. Or the system on which a new object with an authorization
list is being restored is different from the system on which it was saved.
v File level identifier: The creation date and time of the database file on the system does not match the
creation date and time of the file that was saved.
v Member level identifier: The creation date and time of the database file member on the system does
not match the creation date and time of the member that was saved.
v Ownership: The owner of an object on the system is different than the owner of an object from the
save operation.
v Primary Group: The primary group of an object on the system is different than the primary group of
an object from the save operation.
Note: To use this parameter, you need *ALLOBJ special authority.
Single values
*SAME
The previous specification for this value, if any, is used.
*ALL All of the differences listed above are allowed on the restore operation. File level identifier and
member level identifier differences are handled differently than the *FILELVL value. If there is a
file level difference and *ALL is specified on the Data base member option (MBROPT)
parameter, the existing version of the file is renamed and the saved version of the file is restored.
If there is a member level difference, the existing version of the member is renamed and the
saved version of the member is restored. This value will restore the saved data, but the result
may not be correct. For other differences, see the description of each individual value to
determine how differences are handled.
Note: If restoring objects that were saved with SAVOBJ or SAVCHGOBJ, BRMS will change the
parameter to ALWOBJDIF(*FILELVL *AUTL *OWNER *PGP) for these objects to prevent the
renaming.
*NONE
None of the differences listed above are allowed on the restore operation. See the description of
each individual value to determine how differences are handled.
*RTVPCY
The value from the retrieve policy is used for this value.
346 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Other values (up to 4 repetitions)
*AUTL
Authorization list differences are allowed.
If an object already exists on the system with a different authorization list than the saved object,
the object is restored with the authorization list of the object on the system. New objects that are
being restored to a system that is different from which they were saved are restored and linked to
their authorization list. If the authorization list does not exist on the new system, the public
authority is set to *EXCLUDE.
If this value is not specified, authorization list differences are not allowed. If an object already
exists on the system with a different authorization list than the saved object, the object is not
restored. New objects that are being restored to a system that is different from which they were
saved are restored, but they are not linked to the authorization list, and the public authority is set
to *EXCLUDE.
*FILELVL
File level identifier and member level identifier differences are allowed.
An attempt will be made to restore existing physical files even though the physical file on the
save media may have a different file level identifier or member level identifier than the physical
file on the system. The physical file data will only be restored for those physical files whose
format level identifiers on the save media match the format level identifiers of the corresponding
physical file on the system.
If this value is not specified, file level identifier and member level identifier differences are not
allowed. If an object already exists on the system with a different file level identifier or member
level identifier than the saved object, the object is not restored.
*OWNER
Ownership differences are allowed.
If an object already exists on the system with a different owner than the saved object, the object is
restored with the owner of the object on the system.
If this value is not specified, ownership differences are not allowed. If an object already exists on
the system with a different owner than the saved object, the object is not restored.
*PGP Primary group differences are allowed.
If an object already exists on the system with a different primary group than the saved object, the
object is restored with the primary group of the object on the system.
If this value is not specified, primary group differences are not allowed. If an object already exists
on the system with a different primary group than the saved object, the object is not restored.
Top
ASP high storage threshold (STG)
Specifies the auxiliary storage pool high threshold value that cannot be exceeded when retrieving an
object. If the limit is exceeded, the object is not retrieved, but is put on a list of objects to be retrieved
later (using the RSMRTVBRM command) with an indication that a lack of space is the reason for
postponing retrieval. The special value, *SYS, indicates that BRMS is to reference system information for
the auxiliary storage pool’s high storage threshold value.
*SAME
The previous specification for this value, if any, is used.
*ASP The value for auxiliary storage pool high threshold value specified in the BRMS auxiliary storage
pool descriptions is used. You can view the auxiliary storage pool high threshold value by
Set Retrieve Controls for BRM (SETRTVBRM) 347
processing the Work with ASP Descriptions (WRKASPBRM) command. If the reference value is
*NONE, indicating that the auxiliary storage pool is not managed by BRMS, the object will not be
retrieved, and a message is placed into the BRMS log to indicate that retrieval did not occur
because the auxiliary storage pool high storage threshold is *NONE. Otherwise BRMS uses the
referenced limit and the size of the object being retrieved to determine if the threshold will be
exceeded. If so, the object is not retrieved, but is put on a list of objects to be retrieved later
(using the RSMRTVBRM command) with an indication that a lack of space is the reason for
postponing retrieval. If no BRMS information exists for the auxiliary storage pool, BRMS uses the
operating system’s high threshold value for the auxiliary storage pool.
*RTVPCY
The value from the retrieve policy is used for this value.
*SYS The high storage threshold as identified by the system’s auxiliary storage pool threshold is used.
ASP-high-storage-threshold
Specify the maximum percentage of an auxiliary storage pool’s storage capacity that cannot be
exceeded as a result of an object being retrieved. The percentage can range from 1 to 95.
Top
Retrieved object retention (RET)
Specifies how long objects that have been retrieved, are kept on the system. After the object retention
period has passed, the storage associated with the object is freed when maintenance is run.
*SAME
The previous specification for this value, if any, is used.
*ARC The retrieved objects use the retention values specified, if any, when the archive process occurred.
If no object retention was specified when the object was archived, BRMS uses *NOMAX.
*NOMAX
The retrieved objects are kept indefinitely.
*RTVPCY
The value from the retrieve policy is used for this value.
number-of-days
Specify the number of days that retrieved objects should remain available before their storage is
freed. The number of days can range from 0 to 9999.
Top
Extend retention on usage (EXTEND)
Specifies the number of days to extend the retention of a retrieved object if it is used again after the
retrieval operation. You can select the number of days, ranging from 0 to 9999 to add to the date of last
use to determine a new retention date.
*SAME
The previous specification for this value, if any, is used.
*RTVPCY
The value from the retrieve policy is used for this value.
number-of-days
Specify the number of days to extend the retention of a retrieved object if it is used again after
the retrieval operation. The number of days can range from 0 to 9999.
348 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Reset (RESET)
Specifies whether the days used count counter will be reset on the dynamic retrieval of an object.
*SAME
The previous specification for this value, if any, is used.
*NO The days used count will not be reset to zero on the dynamic retrieval of an object.
*RTVPCY
The value from the retrieve policy is used for this parameter.
*YES The days used count will be reset to zero on the dynamic retrieval of an object.
Top
Examples
Example 1: Resetting Control Values for BRMS Retrieve Operations in Your Job
SETRTVBRM DEV(TAP01) RECALL(*NOTIFY *NOTIFY) RTVAUT(*READ)
This command will set control values so that retrieve operations that occur during your job will use
device TAP01, will simply notify you when they occur, and require that you only need read authority to
be able to retrieve an object.
Top
Error messages
*ESCAPE Messages
BRM1134
Device &1 not found.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Set Retrieve Controls for BRM (SETRTVBRM) 349
350 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Set User Usage for BRM (SETUSRBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Set User Usage for BRM (SETUSRBRM) command allows you to set or reset function usage values
for a user or group profile.
This command will use the registration facility to set the BRMS recommended usage options for each
BRMS function registered with the system. SETUSRBRM does not not control security to BRMS objects.
Use i5/OS security to maintain user authority to BRMS objects.
For more information, see section ″The Functional Usage Model abd BRMS Security Considerations″ in
the Backup, Recovery and Media Services manual.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. *SECADM authority is required to use the SETUSRBRM command.
2. The BRMS Advanced feature (Option 2) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
USER User Character value, *DEFAULT Required,
Positional 1
USAGE Usage Character value, *OPERATOR, *ADMIN Optional
Top
User (USER)
Specifies the user or group profile to be given usage of BRMS functions. This is a required parameter.
user-or-group-profile
Specify the name of an existing user or group profile. The usage for the specified user or group
profile will be set for BRMS functions.
*DEFAULT
The default public usage will be set for BRMS functions.
Top
Usage (USAGE)
Specifies the usage that will be given to the user or group profile specified in the User (USER) parameter.
Specific usage controls can be tailored using iSeries Navigator.
© Copyright IBM Corp. 1998, 2006 351
To navigate to Backup Recovery and Media Services functions, click on the system name in the iSeries
Navigator hierarchy, click on the Configure Application Administration task, or choose File and click on
Application Administration. Open the Backup Recovery and Media Services for iSeries folder listed under
the Host Applications tab.
*OPERATOR
The user or group profile specified in the User (USER) parameter will be given usage to BRMS
functions recommended for operators. These include:
v Basic archive activities
v Basic backup activities
v Basic media activities
v Basic migration activities
v Basic movement activities
*ADMIN
The user or group profile specified in the User (USER) parameter will be given usage to all
BRMS functions recommended for administrators.
Top
Examples
Example 1: Setting Administrator Usage
SETUSRBRM USER(payroll) USAGE(*ADMIN)
This command gives the group profile ’payroll’ usage of all BRMS functions.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
352 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Archive using BRM (STRARCBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Archive using BRM (STRARCBRM) command selects a control group and begins the archive
process. You can start the archive immediately or you can schedule it using the system job scheduler.
Processing can be batch or interactive.
Note: The default value for the Option (OPTION) parameter is *REPORT, which produces a report of
archive candidates. To perform an archive you must change the OPTION parameter to *ARCHIVE.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
v The BRMS Advanced feature (Option 2) is required to use this command.
v The special values *LOAD and *EXIT are ignored when you choose the *REPORT option.
v This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
CTLGRP Control group Name, *ARCGRP Required,
Positional 1
OPTION Run option *REPORT, *ARCHIVE Optional
SCDTIME Schedule time Decimal number, *IMMED Optional
SBMJOB Submit to batch *YES, *NO Optional
JOBD Job description Single values: *USRPRF
Other values: Qualified object name
Optional
Qualifier 1: Job description Name
Qualifier 2: Library Name, *LIBL, *CURLIB
JOBQ Job queue Single values: *JOBD
Other values: Qualified object name
Optional
Qualifier 1: Job queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to schedule for archive.
© Copyright IBM Corp. 1998, 2006 353
Archive control groups are groups of lists and special values that share common archive characteristics.
You can create multiple archive control groups to complete your archive strategy.
This is a required field.
*ARCGRP
The default archive control group is processed. The default archive control group is set up in the
BRMS archive policy.
control-group-name
Specify the name of the archive control group, such as QUARTERLY, that you want to process.
Top
Run option (OPTION)
Specifies whether you want to produce a report of candidates for archive or process an archive.
Note: You should always run a report of candidates for archive (*REPORT option) prior to processing the
actual archive. The special values *LOAD and *EXIT are not processed when using the *REPORT option.
*REPORT
You want to produce the archive candidate reports. There are three archive candidate reports. The
reports and the printer file to which they are written are:
v Archive DLO Candidate report - QP1A8ARF
v Archive Object Candidate report - QP1AARC
v Archive Spooled File Candidate report - QP1AOQ
*ARCHIVE
You want to process an archive. There are three archive reports. The reports and the printer file to
which they are written are:
v DLO Archive report - QP1A8ARF
v Object Archive report - QP1AARC
v Spooled File Archive report - QP1AOQ
Top
Schedule time (SCDTIME)
Specifies the time that you want BRMS to begin processing the archive.
*IMMED
Archives are to begin immediately.
schedule-time
Specify the time in hour and minutes that you want the archive to begin. The time is expressed in
24 hour clock format ’hhmm’.
Top
Submit to batch (SBMJOB)
Specifies how you want to process the selected control group.
*YES Submits the processing of the control group to batch. The job is dependent on the job queue and
job description specified as subsequent parameters.
354 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*NO Performs the processing of the control group within the current job.
Top
Job description (JOBD)
Specifies the job description used with this job.
Single values
*USRPRF
The job description in the user profile under which the submitted job runs is used as the job
description of the submitted job.
Qualifier 1: Job description
name Specify the name of the job description used for the job.
Qualifier 2: Library
*LIBL The library list is used to locate the job description.
*CURLIB
The current library for the job is used to locate the job description. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job description is located.
Top
Job queue (JOBQ)
Specifies the job queue in which this job is placed.
Single values
*JOBD
The submitted job is placed on the job queue named in the specified job description.
Qualifier 1: Job queue
name Specify the name of the job queue on which the submitted job is placed.
Qualifier 2: Library
*LIBL The library list is used to locate the job queue.
*CURLIB
The current library for the job is used to locate the job queue. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job queue is located.
Top
Examples
Example 1: Producing a Report of Archive Candidates
STRARCBRM CTLGRP(ARCH01) SCHTIME(1230)
Start Archive using BRM (STRARCBRM) 355
This command will start processing for archive control group ARCH01 at 12:30 p.m.. A report of all
archive candidates is produced.
Example 2: Processing an Archive
STRARCBRM CTLGRP(ARCH01) OPTION(*ARCHIVE) SCHTIME(1230)
This command will start archiving, using archive control group ARCH01, at 12:30 p.m..
Top
Error messages
*ESCAPE Messages
BRM1034
Control group &1 type &2 canceled.
BRM1391
Control group &2 type &3 canceled.
BRM1393
Control group &2 type &3 canceled.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
356 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Backup using BRM (STRBKUBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Backup using BRM (STRBKUBRM) command selects a control group to back up. You can start
the backup immediately or you can schedule it using the system job scheduler. Processing can be batch or
interactive.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
2. You must have *USE authority to backup item exit programs and *EXECUTE authority to libraries
containing the backup item exit programs. *********** End @F0A *********************************
Top
Parameters
Keyword Description Choices Notes
CTLGRP Control group Name, *BKUGRP, *SYSGRP, *SYSTEM Required,
Positional 1
SCDTIME Schedule time Decimal number, *IMMED Optional
SBMJOB Submit to batch *YES, *CONSOLE, *CTLSBS, *NO Optional
STRSEQ Starting sequence Element list Optional
Element 1: Number 1-9999, *FIRST
Element 2: Library Name, *FIRST
APPEND Append to media *CTLGRPATR, *BKUPCY, *NO, *YES Optional
JOBD Job description Single values: *USRPRF
Other values: Qualified object name
Optional
Qualifier 1: Job description Name
Qualifier 2: Library Name, *LIBL, *CURLIB
JOBQ Job queue Single values: *JOBD
Other values: Qualified object name
Optional
Qualifier 1: Job queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
ACTIVITY Activity *CTLGRPATR, *FULL, *INCR Optional
RETENTION Retention Element list Optional
Element 1: Retention type *CTLGRPATR, *DAYS, *PERM
Element 2: Retain media 1-9999, 35
OMITS Omits *PROCESS, *IGNORE Optional
Top
© Copyright IBM Corp. 1998, 2006 357
Control group (CTLGRP)
Specifies the name of the control group that you want to schedule for backup.
Backup control groups are groups of libraries, special values and lists that share common backup
characteristics. You can create multiple backup control groups to complete your backup strategy.
This is a required field.
*BKUGRP
The default backup control group is processed. The default backup user data control group is set
up in the BRMS backup policy.
*SYSGRP
The default system backup control group is processed. The default backup system data control
group is set up when BRMS is installed.
*SYSTEM
The default backup control group is processed. The default backup entire system control group is
set up in the BRMS backup policy.
control-group-name
Specify the name of the backup control group, such as DAILY that you want to process.
Top
Schedule time (SCDTIME)
Specifies the time that you want BRMS to begin processing the backup.
*IMMED
The backups are to begin immediately.
start-time
Specify the time in hour and minutes that you want the backup to begin. The time is expressed in
24 hour clock format ’hhmm’.
Top
Submit to batch (SBMJOB)
Specifies how you want to process the selected control group.
*YES Submits the processing of the control group to batch. The job is dependent on the job queue and
job description specified on subsequent parameters.
*CONSOLE
Transfers the processing of the control group to the system console. This special value is used
with the console monitoring function in BRMS.
*CTLSBS
Submits the control group to the Q1ACTLSBS job queue in the controlling subsystem for batch
processing.
Note: If the control group requires all subsystems to be ended, this special value should only be
used if the backup can complete without operator intervention because the interactive system
console job is ended and will not be available.
358 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
If the control group requires all subsystems to be ended, system reference code A900 3C70 is
displayed while the system is in restricted state. Unresponsive restricted state backups can be
ended and the interactive system console job restarted in two ways:
1. Start DST from the control panel, sign on to DST, select option 14 - End batch restricted state.
2. Specify a value for Maximum time for backup on the System Policy which is large enough to
allow the backup job to complete but small enough to end the backup job if the controlling
subsystem has not been restarted in the specified time.
*NO Performs the processing of the control group within the current job.
Top
Starting sequence (STRSEQ)
Specifies the sequence number and library from which you want to restart backup processing.
Note: If you are not restarting a control group, then you will always start at the first sequence number in
the control group, regardless of the values specified in the STRSEQ parameter.
Note: You can use this parameter when *IBM, *ALLUSR, *ALLPROD, *ALLTEST,*ASPnn or a generic
library name is specified as the Save item in the specified sequence number in the control group.
Element 1: Number
*FIRST
Backup processing starts with the first item in the control group.
sequence-number
Specify the sequence number within the control group from which you want to restart backup
processing.
Element 2: Library
*FIRST
Backup processing starts with the first library in the specified sequence number.
library-name
Specify the name of the library within the sequence number from which you want to restart
backup processing.
Top
Append to media (APPEND)
Specifies whether you want to append the backup data for the backup processing you are restarting to an
active volume.
Note: The APPEND parameter applies only to removable media, and must be *NO if media of class
*ADSM (TSM server) is used.
*CTLGRPATR
Use the value from the control group for Append to media .
*BKUPCY
Use the value from the backup policy for Append to media .
*NO Do not append backup data for the backup you are restarting to an active volume.
Start Backup using BRM (STRBKUBRM) 359
*YES Append the backup data for the backup you are restarting to an active volume. Backup data is
written to the volume immediately following the last active file on the volume.
Top
Job description (JOBD)
Specifies the job description to be used with this job.
Single values
*USRPRF
The job description in the user profile under which the submitted job runs is used as the job
description of the submitted job.
Qualifier 1: Job description
name Specify the name of the job description used for the job.
Qualifier 2: Library
*LIBL The library list is used to locate the job description.
*CURLIB
The current library for the job is used to locate the job description. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job description is located.
Top
Job queue (JOBQ)
Specifies the job queue in which this job is placed.
Single values
*JOBD
The submitted job is placed on the job queue named in the specified job description.
Qualifier 1: Job queue
name Specify the name of the job queue on which the submitted job is placed.
Qualifier 2: Library
*LIBL The library list is used to locate the job queue.
*CURLIB
The current library for the job is used to locate the job queue. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job queue is located.
Top
360 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Activity (ACTIVITY)
The Activity parameter allows you to specify the activity that is to be used when processing the control
group. You can specify that the Weekly activity attribute of the control group entries is to be used or
specify a specific type of activity which will override the Weekly activity attribute of the control group
entries.
Activity overrides must be enabled for the control group specified in the CTLGRP parameter when
specifying a value other than *CTLGRPATR for the Activity parameter. Activity overrides for the control
group can be enabled or disabled from the properties Activity tab for the BRMS backup policy using the
BRMS iSeries Navigator client. The backup policy will have the same name as the control group name.
Diagnostic message BRM400A is sent by the STRBKUBRM validity checking program if activity overrides
are disabled and the value for the ACTIVITY parameter is not *CTLGRPATR.
*CTLGRPATR
Specifies the Weekly activity attribute of the control group entries is to be used when processing
the control group. This is the default value.
*FULL Specifies the Weekly activity attribute of the control group entries is to be overriden and
processed as a full save. The override applies to all days of the week.
*INCR
Specifies the Weekly activity attribute of the control group entries is to be overriden and
processed as a incremental save. The type of incremental save is determined by the current value
of the Incremental type attribute of the control group. The override applies to all days of the
week. Each entry in the control group will be processed when the command is run regardless of
the current value specified for the Weekly activity attribute for the entry. This includes exit
entries. If the control group entry does not support incremental saves, the entry will not be
processed and diagnostic message BRM400F will be entered into the job log.
Top
Retention (RETENTION)
The Retention parameter allows you to specify the retention attributes that are to be applied to objects
saved by the control group. You can specify that the retention attributes of the media policies defined in
the control group are to be used or specify new retention attributes which will override the media policy
retention attributes.
Retention overrides must be enabled for the control group specified in the CTLGRP parameter when
specifying a value other than *CTLGRPATR for element 1 of the Retention. Retention overrides for the
control group can be enabled or disabled using the properties Media Retention tab for the BRMS backup
policy using the BRMS iSeries Navigator client. The backup policy will have the same name as the
control group name.
Diagnostic message BRM400B is sent by the STRBKUBRM validity checking program if retention
overrides are disabled and the value for element 1 of the Retention parameter is not *CTLGRPATR.
Element 1: Retention type
*CTLGRPATR
Specifies the retention attributes of the media policies defined in the control group are to be
applied to the saved objects. This is the default value.
*DAYS
Specifies days retention is to be applied to all objects saved by this control group. Saved objects
Start Backup using BRM (STRBKUBRM) 361
remain active for the specified number of days, after which the saved objects expire. The
number-of-days must be specified in element 2 when using this retention type.
*PERM
Specifies a permanent retention is to be applied to all objects saved by this control group.
Permanent retention means the saved objects remain active indefinitely or until explicitly expired.
Element 2: Retain media
number-of-days
Specifies a number of days from 1-9999 that saved objects remain active.
Top
Omits (OMITS)
Specifies whether omit items are to be processed or ignored when the backup control group is run.
Note: This attribute does not apply to backup lists or the *SYSTEM backup control group.
*PROCESS
Process omit items during the save. Omit items will be excluded from the save
*IGNORE
Ignore omitted items during the save. Omit items will be included in the save.
Top
Examples
Example 1: Backing up a Control Group
STRBKUBRM CTLGRP(BACK01)
This command submits a batch job for backup control group BACK01. The batch job is not scheduled, so
it will start immediately assuming batch job processing is active.
Example 2: Overriding the Save Activity
STRBKUBRM CTLGRP(BACK01) ACTIVITY(FULL)
This command submits a batch job for backup control group BACK01. The control group is set up to
normally perform cumulative saves. When this backup is run, the cumulative saves will be overriden and
a full save will be performed.
Example 3: Overriding the Save Retention
STRBKUBRM CTLGRP(BACK01) ACTIVITY(FULL)
RETENTION(*DAYS 2555)
This command submits a batch job for backup control group BACK01. The control group is set up to
normally perform cumulative saves with a retention of 30 days. When this backup is run, the cumulative
saves and retention will be overriden. A full save with a retention of 2555 days will be performed.
Example 4: Overriding Omitted Save Items
STRBKUBRM CTLGRP(BACK01) ACTIVITY(FULL)
RETENTION(*DAYS 2555) OMITS(*IGNORE)
This command submits a batch job for backup control group BACK01. The control group is set up to
normally perform cumulative saves with a retention of 30 days and uses omits defined in the backup
362 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
policy. When this backup is run, the cumulative saves, retention and omits will be overriden. A full
backup which includes the omit items will be performed and a retention of 2555 days will be applied to
the save.
Example 5: Submit to System Save to Batch
STRBKUBRM CTLGRP(*SYSTEM) SBMJOB(*CTLSBS)
This command submits the *SYSTEM backup control group to the controlling subsystem for batch
processing. Since the backup does not use the BRMS console monitor or any interactive processing, the
backup requires complete media management automation.
Top
Error messages
*ESCAPE Messages
BRM1034
Control group &1 type &2 canceled.
BRM1391
Control group &2 type &3 canceled.
BRM1393
Control group &2 type &3 canceled.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Start Backup using BRM (STRBKUBRM) 363
364 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Expiration for BRM (STREXPBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Media Expiration Processing for BRM (STREXPBRM) command expires media that is in the
BRMS media content information database. When media is expired it can be reused in save processing.
Volumes are expired when the expiration date or number of days are exceeded or when the volume has
been reused. Volumes that are expired are marked with *YES in the Expired field on the Work with
Media display. The STREXPBRM command can be scheduled to run periodically or can be processed as
part of the STRMNTBRM command. The Media Expiration report can be produced by specifying
*REPORT in the Active file action (ACTION) parameter. The report, if printed, is written to the printer
file QP1AEP.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
ACTFILCNT Active file count 0-999, 0 Optional
ACTION Active file action *REPORT, *EXPMED Optional
EXPSETMED Expire media set volumes *NO, *YES Optional
ACTFILRET File retention type *ANY, *VERSION Optional
SLTCRTDATE Select creation dates Element list Optional
Element 1: Beginning
creation date
Character value, *BEGIN, *CURRENT
Element 2: Ending creation
date
Character value, *END, *CURRENT
Top
Active file count (ACTFILCNT)
Specifies the number of active files that are allowed to exist on a volume before an expiration warning is
issued for the volume in the Media Expiration report or automatically expired if the *EXPMED choice is
selected for the Active file action (ACTION) parameter.
Note: If the Active file count (ACTFILCNT) parameter is 0, and you specify *REPORT in the Active file
action (ACTION) parameter, BRMS produces a report and expires media with 0 active files. If the Active
file count (ACTFILCNT) parameter is greater than 0, only a report is produced.
0 The default number of active files is 0.
number-of-files
Specify the number of active files. You can specify from 0 to 999 active files.
Top
© Copyright IBM Corp. 1998, 2006 365
Active file action (ACTION)
Specifies the action that you want to perform, based on the value specified in the Active file count
(ACTFILCNT) parameter. You can print the Media Expiration report, expire media or take no action.
*REPORT
A warning is issued in the Media Expiration report for all media that have a number of active
files equal to or less than the number of active files specified in the Active file count
(ACTFILCNT) parameter.
Note: An exception to this is that if the Active file count (ACTFILCNT) parameter is 0, media
with no active files will be expired.
*EXPMED
Media is expired that has a number of active files equal to or less than the number of active files
specified in the Active file count (ACTFILCNT) parameter and the active file count is less than
the total number of files on the volume. For example, if you specified 1 in the Active file count
(ACTFILCNT) parameter and the media held only one file, the media would not expire. If the
media held two files and one file was active and the other had expired, the media would be
allowed to expire.
Top
Expire media set volumes (EXPSETMED)
Specifies whether to expire all eligible media in a media set with no active files when the STREXPBRM
command processes. This will cause media that are members of media sets to expire even if there is
unexpired media with active file sequences at subsequent positions in the set. This allows the media to be
reused prior to expiration of the set and reduces the number of active media being managed. By default,
BRMS will not expire media in a set prior to unexpirable media unless the entire set can be expired.
*NO Volumes in a media set are not expired unless the entire set is expired.
*YES Volumes in a media set are expired.
Note: Expiring all eligible media in a set can reduce the size of the set or create two or more new sets.
Note: It is recommended that you run this function periodically and it can be a long running process.
Top
File retention type (ACTFILRET)
Specifies the type of retention for the active files that you want to include in media expiration.
*ANY Include active files with any type of retention.
*VERSION
Include only active files whose expiration is based on version retention.
Top
Select creation dates (SLTCRTDATE)
Specifies a range of creation dates that you want to use when selecting media to expire or report. The
Beginning creation date is the beginning of a date range of media selected and the Ending creation date
is the end of the date range of creation dates.
366 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Note: This parameter is active only when you specify *EXPMED in the Active file action (ACTION)
parameter.
Element 1: Beginning creation date
*BEGIN
Uses the earliest media volume creation date that is on the file for the beginning of the creation
date range.
beginning-creation-date
Specify a date that is the beginning of the creation date range. The date must be less than or
equal to the current date.
*CURRENT
Uses the current date as the beginning of the creation date range.
number-of-days
Specify the number of days before the current day that is used to determine the beginning date of
the date range.
Element 2: Ending creation date
*END The last creation date in the media inventory is used as the end of the creation date range.
*CURRENT
Uses the current date as the ending of the creation date range.
ending-creation-date
Specify a date that is the ending of the creation date range. The date must be equal to or greater
than the beginning creation date and less than or equal to the current date.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Examples
Example 1: Expiring Volumes Under Version Control
STREXPBRM ACTFILCNT(2) ACTION(*EXPMED) ACTFILRET(*VERSION)
This command starts expiration processing for any volume that has 2 or less active files on it and whose
media expiration is controlled using version control.
Example 2: Expiring Volumes in a Set
STREXPBRM ACTION(*EXPMED) EXPSETMED(*YES)
This command starts expiration processing for expiring volumes contained in a set if there are no active
files on the volumes.
Start Expiration for BRM (STREXPBRM) 367
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
368 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Migration using BRM (STRMGRBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Migration using BRM (STRMGRBRM) command allows you to specify a migration control
group to process. You can start the migration immediately or you can schedule it using the system job
scheduler. Processing can be batch or interactive.
The default for the OPTION parameter is *REPORT, which produces the Migration Item Candidate
report. This allows you to process a report and review what will be migrated prior to performing the
migration operation. To perform a migration for the items in the Migration Item Candidate report created
by the *REPORT option or to restart a migration that was interrupted for some reason, you can specify
the special value *RESUME.
Each time you process the STRMGRBRM command using either the *REPORT or *MIGRATE special
values, BRMS creates a migration candidate file for the items in the control group. This file contains
information about the items in the control group at the time that you processed the STRMGRBRM
command, as well as information about auxiliary storage pool sizes and utilization. The migration
candidate file that you created is used for producing candidate reports and performing migration
operations for the control group. If you specify *RESUME for a control group, the migration candidate
file that was created for the control group when you processed the STRMGRBRM command is used. A
new migration candidate file is not created when you specify *RESUME, even though items in the control
group or auxiliary storage pool characteristics may have changed.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. The BRMS Advanced feature (Option 2) is required to use this command.
2. If you use the special value *EXIT in a migration control group and the resulting processing modifies
the characteristics of either the control group items or auxiliary storage pool characteristics, BRMS
does not record the changes in the resulting migration candidate file. You should consider not using
the *EXIT special value in migration control groups if the resulting processing alters item or auxiliary
storage pool characteristics.
3. The migration candidate list that is created as a result of processing a control group using either the
*REPORT or *MIGRATE special values is not associated with a job or user id, only the name of the
control group. If Job A processes a migration control group and Job B subsequently processes the
same migration control group, the migration candidate list created for Job A will be overwritten by
the migration candidate list created for Job B. If you want to resume a migration control group using
the *RESUME special value, the migration candidate list created for Job B is the list that would be
available for the resume operation, even if Job A was the job that was interrupted.
4. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
© Copyright IBM Corp. 1998, 2006 369
Parameters
Keyword Description Choices Notes
CTLGRP Control group Name, *MGRGRP Required,
Positional 1
OPTION Run option *REPORT, *MIGRATE, *RESUME Optional
SCDTIME Schedule time Element list Optional
Element 1: Beginning time Character value, *IMMED
Element 2: Ending time Character value, *NONE
SBMJOB Submit to batch *YES, *CONSOLE, *NO Optional
JOBD Job description Single values: *USRPRF
Other values: Qualified object name
Optional
Qualifier 1: Job description Name
Qualifier 2: Library Name, *LIBL, *CURLIB
JOBQ Job queue Single values: *JOBD
Other values: Qualified object name
Optional
Qualifier 1: Job queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
ENDINTJOB End interactive jobs *SYSPCY, *NO, *YES Optional
DELAY Delay 0-999, *SYSPCY Optional
Top
Control group (CTLGRP)
Specifies the name of the control group that you want to to migrate.
This is a required field.
*MGRGRP
The default migration control group is processed. The default migration control group is created
by BRMS at installation.
control-group-name
Specify the name of the migration control group, that you want to process.
Top
Run option (OPTION)
Specifies whether you want to produce a report of migration candidates or process the control group.
Note: You should always run a report of migration candidates (*REPORT option) prior to processing the
actual migration. The special value *EXIT is not processed when using the *REPORT option.
*REPORT
You want to produce the Migration Item Candidate report. The printer file the report is written to
is QP1AHC.
*MIGRATE
You want to process a migration control group based on the migration plan.
370 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*RESUME
You want to resume processing a migration control group. The migration will use the last
migration report generated for this control group.
Top
Schedule time (SCDTIME)
Specifies the time that you want BRMS to begin and end processing items in the migration control group.
The beginning time is the time expressed in 24 hour format that you want the migration processing to
begin. The ending time determines when you want migration processing to end. The migration process
will not end in the middle of processing a migration item.
Note: If the time that you specify for the beginning time is earlier than the current time, processing is
delayed until the next day. Likewise the ending time specified will be moved to the next day.
Note: Leading zeroes must be used when indicating hour and/or minute values less than 10. The use of
a time separator is not supported.
Element 1: Beginning time
*IMMED
You want to start migration control group processing immediately.
begin-time
Specify the time in hour and minutes that you want the migration to begin. The time is expressed
in 24 hour clock format ’hhmm’.
Element 2: Ending time
*NONE
The migration process continues until it ends, regardless of how long it takes.
ending-time
Specify the time that you want to conclude the migration process. The process will not end until
it has completed processing the item that it is currently processing when the ending time is
reached.
Top
Submit to batch (SBMJOB)
Specifies how you want to process the selected control group.
*YES Submits the processing of the control group to batch. The job is dependent on the job queue and
job description specified as subsequent parameters.
*CONSOLE
Transfers the processing of the control group to the system console. This special value is used
with the console monitoring function in BRMS.
*NO Performs the processing of the control group within the current job.
Top
Start Migration using BRM (STRMGRBRM) 371
Job description (JOBD)
Specifies the job description to be used with this job if SBMJOB(*YES) is specified.
Single values
*USRPRF
The job description in the user profile under which the submitted job runs is used as the job
description of the submitted job.
Qualifier 1: Job description
name Specify the name of the job description used for the job.
Qualifier 2: Library
*LIBL The library list is used to locate the job description.
*CURLIB
The current library for the job is used to locate the job description. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job description is located.
Top
Job queue (JOBQ)
Specifies the job queue to use if SBMJOB(*YES) is specified.
Single values
*JOBD
The submitted job is placed on the job queue named in the specified job description.
Qualifier 1: Job queue
name Specify the name of the job queue on which the submitted job is placed.
Qualifier 2: Library
*LIBL The library list is used to locate the job queue.
*CURLIB
The current library for the job is used to locate the job queue. If no library is specified as the
current library for the job, QGPL is used.
name Specify the name of the library where the job queue is located.
Top
End interactive jobs (ENDINTJOB)
Specifies whether BRMS should automatically notify active users that a migration process is about to
occur and then sign them off. When *SYSPCY is specified, BRMS references the system policy to
determine whether interactive users are to be notified and signed off.
*SYSPCY
The value for sign off interactive users from the system policy is used for this migration process.
*NO You do not want BRMS to automatically sign off interactive users.
372 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*YES You want BRMS to automatically sign off interactive users.
Top
Delay (DELAY)
Specifies the maximum time limit in minutes that BRMS automatically notifies users prior to
automatically signing off active users. The number of minutes can range from 0 to 999 minutes.
Messages are sent using the following schedule:
v Zero - send the message one time and then the user is signed off.
v 1-10 - send the message every minute and then the user is signed off.
v 11-60 - send the message every 2 minutes and then the user is signed off.
v 61+ - send the message every 10 minutes and then the user is signed off.
*SYSPCY
The sign off limit value from the system policy is used for this migration process.
number-of-minutes
Specify the number of minutes that will be the sign off limit for this migration process. The
number of minutes can range from 0 to 999 minutes.
Top
Examples
Example 1: Producing a Report of Migration Candidates
STRMGRBRM CTLGRP(MGR01) SCDTIME(2000 0400)
This command starts migration operations, for items identified in control group MGR01, between the
hours of 10:00 PM and 4:00 AM.
Top
Error messages
*ESCAPE Messages
BRM10A2
Control group &1 type &2 completed with errors.
BRM1387
Error occurred processing exit command for control group &1.
BRM1820
Control group &1 type &2 ended abnormally.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM1955
Console monitor is not active.
BRM1F27
Operation not allowed, resources not available.
Start Migration using BRM (STRMGRBRM) 373
BRM2160
Migration for control group &1 ended.
BRM40A2
BRMS product initialization required.
CPF3700
All CPF37xx messages could be signaled. xx is from 01 to FF.
CPF3800
All CPF38xx messages could be signaled. xx is from 01 to FF.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
374 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Maintenance for BRM (STRMNTBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Maintenance for BRM (STRMNTBRM) command performs various BRMS maintenance and
clean-up functions. The STRMNTBRM command can be scheduled to process periodically either by
manual submission or inclusion in an automatic job scheduler.
The STRMNTBRM command processes several other commands that can be run separately. These
include:
v RMVMEDIBRM - Remove media information from BRM
v MOVMEDBRM - Move media using BRM
v STREXPBRM - Expire media from BRM
v RMVLOGEBRM - Remove BRM log entries
v WRKMEDIBRM - Work with media information
v STRRCYBRM - Recovery analysis
The STRMNTBRM produces multiple reports depending on the print options you select as well as the
current conditions that it detects. For instance, the Centralized Media Audit report will not print if you
are not using a clustered network environment in BRMS. Listed below are the printer files and associated
reports that can be produced when the STRMNTBRM command processes:
v QP1AVER - Version Control
v QP1AEP - Media Expiration
v QP1AMM - Media Report by Expiration Date
v QP1AHS - Media Information
v QP1ALE - Save Strategy Exceptions
v QP1ARCY - Recovering Your Entire System
v QP1AASP - Display ASP Information
v QP1ARW - Recovery Activities
v QP1A2SL - Location Analysis
v QP1ASYN - Centralized Media Audit
v QP1A2RCY - Recovery Volume Summary
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
2. All object authority is required to run this command.
3. This command should not be run as a remote command.
4. Depending on the size of your media inventory, this command can take a long time to process.
5. This command should be run as an independent job. No other BRMS functions should be active when
the STRMNTBRM command is processing.
© Copyright IBM Corp. 1998, 2006 375
6. Reorganizing the BRMS database files can be a long running process requiring additional disk storage.
Reorganization will occur on all BRMS data base files. Reorganization of files may be skipped if
sufficient disk storage is not available, or if the file has no members or records.
Top
Parameters
Keyword Description Choices Notes
EXPMED Expire media *YES, *NO Optional
EXPSETMED Expire media set volumes *NO, *YES Optional
RMVMEDI Remove media information Element list Optional
Element 1: Media contents *EXP, *NONE, *REUSE
Element 2: Object level detail 1-9999, *MEDCON
RMVMGRINF Remove migration
information
1-9999, 180, *NONE Optional
MOVMED Run media movement *NO, *YES Optional
RMVLOGE Remove log entries Element list Optional
Element 1: Type *ALL, *NONE, *ARC, *BKU, *MAINT, *MED, *MGR,
*RCY, *RTV, *SEC
Element 2: From date Character value, *BEGIN, *CURRENT
Element 3: To date Character value, 90, *CURRENT, *END
RUNCLNUP Run cleanup operations *YES, *NO Optional
RTVVOLSTAT Retrieve volume statistics *YES, *NO Optional
AUDSYSMED Audit system media Single values: *NONE, *NETGRP
Other values (up to 50 repetitions): Character value
Optional
CHGJRN Change BRM journal
receivers
*YES, *NO Optional
PRTEXPMED Print expired media report *YES, *NO Optional
PRTVSNRPT Print version report *EXPMED, *NO, *YES Optional
PRTBKUACT Print media information *YES, *NO Optional
PRTRCYRPT Print recovery reports Single values: *ALL, *NONE
Other values (up to 3 repetitions): *RCYACT, *RCYANL,
*SAVEXCP
Optional
RCYLOC Recovery locations Single values: *ALL
Other values (up to 10 repetitions): Name, *HOME
Optional
PRTSYSINF Print system information *NO, *YES Optional
RGZBRMDB Reorganize BRMS database *NO, *YES Optional
REFREE Auto-retrieved objects Element list Optional
Element 1: Refree *NO, *YES
Top
Expire media (EXPMED)
Specifies whether to expire media when the STRMNTBRM command processes. Expired save files that
have been copied to tape are deleted when this command is run. The STREXPBRM command is
processed by the STRMNTBRM command to expire media.
*YES Media is expired when maintenence is run.
*NO Media is not expired when maintenence is run.
376 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Expire media set volumes (EXPSETMED)
Specifies whether to expire media set volumes when the STRMNTBRM command processes. This will
cause media that are members of media sets to expire even if there is unexpired media with active file
sequences at subsequent positions in the set. This allows the media to be reused prior to expiration of the
set and reduces the number of active media being managed. By default, BRMS will not expire media in a
set prior to unexpirable media unless the entire set can be expired.
*NO Volumes in a media set are not expired when the STRMNTBRM command is processed unless the
entire set is expired.
*YES Volumes in a media set are expired when the STRMNTBRM command is processed.
Note: Expiring all eligible media in a set can reduce the size of the set or create two or more new sets.
Note: It is recommended that you run this function periodically and it can be a long running process.
Top
Remove media information (RMVMEDI)
Specifies what information to remove from the BRMS media content inventory and how long to keep
object detail. The RMVMEDIBRM command is used by the STRMNTBRM command to accomplish BRMS
media content information removal. The Media contents (MEDCON) parameter indicates when media
content information is removed from the media content information and the Object level detail
(OBJDTL) parameter indicates when the object level detail is to be removed.
Element 1: Media contents
*EXP All BRMS media media content information entries that have an expiration date that is equal to
or less than the current date are removed from the media content inventory.
*NONE
No media content information is to be removed from the media content information inventory
when the STRMNTBRM command is run.
*REUSE
Media content information associated with a volume is not removed from the media content
inventory file until the volume is re-used, even though the volume has already expired.
Element 2: Object level detail
*MEDCON
Object detail is removed when media content information is removed.
number-of-days
Specify the number of days that object detail is kept in the media content inventory. If this
number of days is greater than the number of days implied in the Media contents field, such as
the volume expires in 60 days and you specify 90 days for the Object level detail , the value has
no effect since object detail is always removed when media content information is removed.
However, if you specify 45 days and the object expires in 60 days, the object level detail is
removed 15 days before other media content information is removed.
Top
Start Maintenance for BRM (STRMNTBRM) 377
Remove migration information (RMVMGRINF)
Specifies how old in number of days that migration information should be before it is removed from the
migration information history.
180 Migration information is removed from the migration information history after 180 days.
*NONE
Migration information is not removed from the migration information history.
number-of-days
Specify the number of days after which migration information is considered old and no longer
useful. For instance, if you specified 200, migration information older than 200 days would be
removed from the migration information history when the STRMNTBRM command was
processed. You can specify from 1 to 9999 days.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
Top
Run media movement (MOVMED)
Specifies whether to process scheduled media movement. The MOVMEDBRM command is processed by
the STRMNTBRM command to move the selected media.
*NO Media movements are not processed when the STRMNTBRM command is processed.
*YES Scheduled media movements are processed when the STRMNTBRM command is processed.
Top
Remove log entries (RMVLOGE)
Specifies whether to remove log entries when the STRMNTBRM command is run. You can specify the
type of log entries that you want to remove and a date range of log entries. The RMVLOGEBRM
command is processed by the STRMNTBRM command to remove log entries.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: Type
*ALL Selects all log entries to remove within the specified date range.
*ARC Selects only archive log entries to remove within the specified date range.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU Selects only back up log entries to remove within the specified date range.
*MAINT
Selects only maintenance log entries to remove within the specified date range.
*MED Selects only media management log entries to remove within the specified date range.
*MGR Selects only migration log entries to remove within the specified date range.
378 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*NONE
No log entries are removed when the STRMNTBRM command processes.
*RCY Selects only recovery log entries to remove within the specified date range.
*RTV Selects only retrieve log entries to remove within the specified date range.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*SEC Selects only security log entries to remove within the specified date range. Only log entries whose
primary area are security will be removed. An entry may be logged for any reason and have
security as a secondary area.
Element 2: From date
*BEGIN
The earliest log entry date in the BRMS log is the beginning date of the date range.
*CURRENT
The current date is the starting point of the range of dates used to remove entries from the BRMS
log.
from-date
Specify the date entered in job date format with or without date separators that you want to be
the beginning date of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the beginning date of
the date range.
Element 3: To date
90 90 days before the current day is the ending date of the date range.
*CURRENT
The current date is the ending date of the date range.
*END The last date in the log is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Run cleanup operations (RUNCLNUP)
Specifies whether BRMS is to run clean up operations when the STRMNTBRM command processes.
Cleanup operations includes various BRMS general routines such as creation of the location analysis
report, analysis of deleted libraries, media policies with expiration dates that have past, and more.
*YES Clean up operations are performed when the STRMNTBRM command is processed.
*NO Clean up operations are not performed when the STRMNTBRM command is processed.
Top
Start Maintenance for BRM (STRMNTBRM) 379
Retrieve volume statistics (RTVVOLSTAT)
Specifies whether BRMS is to retrieve volume statistics when the STRMNTBRM command processes.
*YES Volume statistics are retrieved when the STRMNTBRM command is processed.
*NO Volume statistics are not retrieved when the STRMNTBRM command is processed.
Top
Audit system media (AUDSYSMED)
Specifies whether media information as contained by one or more systems in the network group should
be audited and differences in media information resolved. You can enter one or more system/network
identifiers or you can select the special value *NETGRP for all systems in the network group or *NONE
for none of the systems in the network group.
Note: Running shared inventory audit processing on each and every system using STRMNTBRM results
in undue system and communications work. This auditing could be performed on just one system, in
order to accomplish the same result.
Note: Shared inventory audit processing is not generally required (except when users are restoring a back
level QUSRBRM database) and need a way to resynchronize this local back level copy, or correct for
problems due to loss of QA1ANET2 records.
Note: Shared inventory audit processing is skipped if the current system is in restricted state or the
remote systems required to complete the audit are not available.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Single values
*NONE
No media information for any system in the network group is to be audited and differences
resolved.
*NETGRP
Media information for all systems in the network group is to be audited and differences resolved.
Note: The BRMS Network feature (Option 1) is required to use this value.
Other values (up to 50 repetitions)
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to specify a remote system.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to specify a remote system.
Top
380 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Change BRM journal receivers (CHGJRN)
Specifies whether to change the receivers for the BRMS journals when the STRMNTBRM command
processes. When the BRMS journal receivers are changed, the old BRMS journal receiver is deleted.
*YES The journal receivers are changed when the STRMNTBRM command is processed.
*NO The journal receivers are not changed when the STRMNTBRM command is processed.
Top
Print expired media report (PRTEXPMED)
Specifies whether to print a report of media that was expired when the STRMNTBRM command
processes.
*YES A report of media that was expired prints when the STRMNTBRM command is processed.
*NO No report is created of the media that was expired when the STRMNTBRM command is
processed.
Top
Print version report (PRTVSNRPT)
Specifies whether to print a version control report when the STRMNTBRM command processes. The
special value *EXPMED indicates that the version control report should be printed whenever media
expiration processing is performed.
*EXPMED
Print a version control report whenever media expiration processing is performed.
*NO No version control report prints when the STRMNTBRM command is processed.
*YES A version control report prints when the STRMNTBRM command is processed.
Top
Print media information (PRTBKUACT)
Specifies whether to print a report of what was backed up. The report will include backups done the day
of the report and the previous day. The Work with Media Information using BRM (WRKMEDIBRM)
command with parameter OUTPUT(*PRINT) is run by the STRMNTBRM command to produce the
report.
*YES A report is printed of what was backed up today and yesterday when the STRMNTBRM
command is run.
*NO No report is created of what was backed up.
Top
Start Maintenance for BRM (STRMNTBRM) 381
Print recovery reports (PRTRCYRPT)
Specifies which recovery reports to print for recovery when the STRMNTBRM command runs. If you
want to print two of the three reports, specify the special values for the reports. If you want to print all
three of the reports, specify *ALL.
Single values
*ALL Print all reports for recovery when the STRMNTBRM command is processed. Recovery
information that is printed will included system information. Reports generated from the value
*SYSINF will not be included with *ALL.
*NONE
You do not want to print any of the reports when the STRMNTBRM command is processed.
Other values (up to 3 repetitions)
*RCYACT
Print the Recovery Activities report when the STRMNTBRM command is processed.
*RCYANL
Print the Recovery Analysis report when the STRMNTBRM command is processed.
*SAVEXCP
Print the Save Strategy Exceptions report when the STRMNTBRM command is processed.
Top
Recovery locations (RCYLOC)
Specifies the locations for which you want to print recovery reports. Reports printed depend on the value
specified in the Print recovery reports (PRTRCYRPT) parameter.
Single values
*ALL Reports are printed for all locations.
Other values (up to 10 repetitions)
location-name
Specify the location names for which you want to print reports.
Top
Print system information (PRTSYSINF)
Indicates if BRMS should issue the i5/OS command PRTSYSINF to produce reports of system
information. These reports include user library information, system hardware and resource information,
configuration information, and much more.
*NO BRMS will not issue the PRTSYSINF command and the associated reports will not be generated.
*YES BRMS will issue the PRTSYSINF command and the associated reports will be generated.
Top
382 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Reorganize BRMS data base (RGZBRMDB)
Use this parameter to reorganize the BRMS database. This option removes deleted records from the
BRMS database. You should reorganize the BRMS database on a periodic basis, particularly if you save
many objects and save with object detail.
Note: Reorganizing the BRMS database can be a long running process requiring additional disk storage.
Reorganization will occur on the BRMS media inventory, media information (history) and object detail.
BRMS may skip reorganization of the database if sufficient disk storage is not available, or if the database
has no members or records.
*NO The BRMS database is not reorganized.
*YES The BRMS database is reorganized.
Top
Refree auto-retrieved objects (REFREE)
Use this parameter to refree archive objects that have been auto-retrieved.
*NO Do not refree auto-retrieved objects.
*YES Refree auto-retrieved objects.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
Top
Examples
Example 1: Start Maintenance, Move Media, Clean the Archive Log
STRMNTBRM MOVMED(*YES) RMVLOGE(*ARC)
This command performs normal maintenance, starts media movement processing, and removes archive
entries that are older than 90 days old from the BRMS log.
Example 2: Start Maintenance to Reorganize the BRMS Database Files
STRMNTBRM RGZBRMDB(*YES)
This command performs normal maintenance and runs the RGZDBF commmands on all the BRMS data
base files.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1343
Date &2 is not correct.
BRM1856
Job information cannot be retrieved. Errors occurred.
Start Maintenance for BRM (STRMNTBRM) 383
BRM1868
File &1 not opened successfully.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
BRM6708
Command ended due to error.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
384 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Recovery using BRM (STRRCYBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Recovery using BRM (STRRCYBRM) command recovers items ranging from a single library to
the entire system. Any library or group of libraries that were saved by a BRMS save command can be
restored by this command. Recovery is based on entries in the BRMS media inventory contents
information.
Recovery using the STRRCYBRM uses the most recent times and dates of entries in the BRMS media
content information. This reflects the order in which libraries and objects were saved. For instance, a
recovery request for a library will restore the most recent full backup of a library, the latest incremental
backup of that library, and all object level saves that have dates after the last full save.
BRMS always uses non-duplicated media information when selecting items for recovery regardless of
whether the location of the media if a value of *ALL is specified for the Volume location (LOC)
parameter. If you want to select recovery items from duplicated media information, then specify *YES on
the Use duplicate media (USEDUPMED) parameter.
The design of the STRRCYBRM command concerning libraries is to report all the resources needed to
recover a library in its entirety. This means that during the search of media information a full backup is
required as a starting point in recovering the library. If a full backup is not found meeting the search
criteria, any subsequent saves of objects for that library are ignored. This could happen if control group A
saves libraries full and control group B saves libraries incremental and the STRRCYBRM
OPTION(*CTLGRP) CTLGRP((B) is issued. This could also happen if the time period specified does not
have a full backup of the library.
Note: Prior to processing a restore, you should use the report option (*REPORT) to produce a report of
the steps required to restore a portion of the system or the entire system. The report that is produced is
the Recovery Analysis report. The report, if printed, is written to printer file QP1ARCY.
Note: When you are restoring multiple items, such as a *SYSTEM , *SYSBAS or *SAVSYS, it is advisable
to first run a Recovery Analysis Report to assist you in evaluating the steps required to restore the
requested items. For instance, BRMS cannot install the Licensed Internal Code and restore the operating
system for you automatically. The report assists you in locating the required volumes and identifies the
manual steps needed to restore the Licensed Internal Code, the operating system, the BRMS product and
required system libraries.
After you have performed the manual steps, BRMS is able to provide automated assistance in restoring
the remainder of the system. The steps required to restore the system are provided in the Recovery
Analysis report.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restrictions:
1. You must have authority to the following restore commands:
Restore Object (RST)
Restore Document Library Object (RSTDLO)
Restore Library (RSTLIB)
© Copyright IBM Corp. 1998, 2006 385
Restore Object (RSTOBJ)
Restore Configuration (RSTCFG)
Restore User Profiles (RSTUSRPRF)
Restore System Information (RSTSYSINF)
and must have the object authorities required by those commands as outlined in Appendix D of the
iSeries Security Reference.
2. To restore libraries and objects:
v You must have *ADD and *READ authority to the QSYS library to restore libraries which do not
exist.
v You must have *OBJEXIST authority to restore over objects contained in a library.
3. To restore documents and folders:
v You must be enrolled in the system distribution directory.
v You must have *CHANGE authority to the parent folder and *ALL authority to the document if it
already exists on the system.
v You must have *EXECUTE authority to the document library.
4. To restore directories and files:
v You must have *W and *OBJEXIST authority to file if it already exists on the system.
v You must have *WX authority to the parent directory.
v You must have *ADD authority to the owning user profile of the directory into which the parent
directories are created.
v You must have *ALLOBJ special authority to create parent directories with a user profile other than
your own.
5. You must have *USE authority to any auxiliary storage pool device when recovering objects to
auxiliary storage pool devices.
6. These additional restrictions apply when *APYJRNCHG is specified for the Option (OPTION)
parameter:
v You must have authority to the APYJRNCHG command.
v You must have *EXECUTE authority to the libraries containing the files, journals and journal
receivers.
v You must have *OBJEXIST authority to restore any files that already exist on the system.
v You must have *CHANGE and *OBJMGT authority to apply journal changes to journaled files.
v You must have *USE authority to any journal or journal receiver used to apply journal changes.
7. This command should not be used by control group *EXIT item processing as results will be
unpredictable.
Top
Parameters
Keyword Description Choices Notes
OPTION Option *SYSTEM, *ALLDLO, *ALLUSR, *APYJRNCHG, *ASP,
*ASPDEV, *CTLGRP, *IBM, *LIB, *LNKLIST,
*RCYEXITPGM, *RESUME, *SAVSYS, *SYSBAS
Optional,
Positional 1
ACTION Action *REPORT, *RESTORE Optional
386 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Keyword Description Choices Notes
PERIOD Time period for recovery Element list Optional
Element 1: Start time and
date
Element list
Element 1: Beginning time Time, *AVAIL
Element 2: Beginning date Character value, *BEGIN, *CURRENT
Element 2: End time and
date
Element list
Element 1: Ending time Time, *AVAIL
Element 2: Ending date Character value, *END, *CURRENT
USESAVF Use save files *YES, *NO Optional
USEADSM Use TSM *YES, *NO Optional
ASP Auxiliary storage pool 1-32, *SYSTEM Optional
LIB Library Generic name, name Optional
LIST List Name, *ALL Optional
JRN Journal Single values: *JRNLST
Other values (up to 25 repetitions): Qualified object name
Optional
Qualifier 1: Journal Name
Qualifier 2: Library Name
ASPDEV ASP device Values (up to 25 repetitions): Element list Optional
Element 1: From system Name, *LCL
Element 2: Auxiliary storage
pool
Name, *ALL
Element 3: Objects *ALL, *LIB, *LNK
CTLGRP Control group selection Single values: *SELECT
Other values (up to 300 repetitions): Element list
Optional
Element 1: Control group Name, *NONE, *BKUGRP, *SYSGRP, *SYSTEM
Element 2: Sequence number 1-99, 1
OMITLIB Libraries to omit Values (up to 25 repetitions): Generic name, name,
*DELETE, *NONE
Optional
ALWDUP Allow duplicate entries *NO, *YES Optional
LOC Volume location Single values: *ALL
Other values (up to 10 repetitions): Name, *HOME
Optional
FROMSYS From system Character value, *LCL Optional
PRTSYSINF Print system information *NO, *YES Optional
USEDUPMED Use duplicate media *NO, *YES Optional
USRRCYINF User recovery information *NONE, *ADD Optional
Top
Option (OPTION)
Specifies what you want to restore from the BRMS media content inventory.
*SYSTEM
You want to restore the system (1) and basic user (2-32) auxiliary storage pools and auxiliary
storage pool devices based on the BRMS media content information.
*ALLDLO
You want to restore all documents, folders, and distribution objects (mail) from the media content
information that meet the specified starting and ending date.
Start Recovery using BRM (STRRCYBRM) 387
*ALLUSR
You want to restore all user libraries that were saved using the *ALLUSR special value.
Refer to the Special Values table for the Save Library (SAVLIB) Command in the Saving Libraries
section of the iSeries Backup and Recovery book for a list of libraries which can be restored using
this special value.
*APYJRNCHG
You want to apply journaled changes. Specify the journals using the Journal (JRN) parameter.
The value of the From system (FROMSYS) parameter will be ignored if this value is specified.
If you want to apply journaled changes to a point in time, specify the point in time on the End
time and date prompt of the Time period for recovery (PERIOD) parameter.
*ASP You want to restore the system (1) or basic user (2-32) auxiliary storage pool. You must specify
the auxiliary storage pool using the Auxiliary storage pool (ASP) parameter. If you are restoring
system (1) auxiliary storage pool, only user data is restored, not the operating system.
*ASPDEV
You want to restore auxiliary storage pool devices. Specify the systems, auxiliary storage pool
devices, and objects using the ASP device (ASPDEV) parameter. The value of the From system
(FROMSYS) parameter will be ignored if this value is specified.
*CTLGRP
You want to restore a control group and its associated save items from the media content
information. You must specify the control group name in the Control group selection (CTLGRP)
parameter.
Note: When you select *NONE in the CTLGRP parameter you are indicating that you want to
restore saved items from the media content information file not associated with a control group
name.
Additionally you have the option of selecting up to 300 control groups to restore when you use
the *SELECT option in the CTLGRP parameter. You can sequence the order in which the selected
control groups are restored by using the Sequence number element of the CTLGRP parameter.
*IBM You want to restore all system (IBM) libraries that were saved using the *IBM special value.
Refer to the Special Values table for the Save Library (SAVLIB) Command in the Saving Libraries
section of the iSeries Backup and Recovery book for a list of libraries which can be restored using
this special value.
*LIB You want to restore a library from the media content information. You must specify the library
name in the Library (LIB) parameter. The latest version of the library is restored from the BRMS
media content information by using the latest full save plus any incremental and object saves
subsequent to the latest full save.
*LNKLIST
You want to restore all integrated file system objects that were specified in a list from the media
content information that meet the specified starting and ending date. Specify the backup link list
using the List (LIST) parameter when using this special value.
*RCYEXITPGM
Any objects that have been recovered and are waiting for a recovery exit program to be called to
reestablish relationships between related objects will be called passing the list of objects that were
restored.
This step is required to successfully rebuild objects that specified recovery exit processing when
the objects were saved.
During a complete system recovery, steps are provided to restore all system and user data back to
the system. Some of these objects were saved requesting that a recovery exit program be called
via the Recovery exit program (RCYEXITPGM) parameter. The objects are all restored by BRMS
388 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
in the appropriate recovery step, and each object that requires a call to a recovery exit program is
put into a list. After all data for the recovery is restored, the exit program is called for each
package through processing of this option.
A package is a related group of media files that were grouped together during the save operation
by specifying a value on the Package identifier (PKGID) parameter.
In a recovery of a single object or package that had requested a recovery exit program be called
on recovery, this step will be done in the same way, the objects will be restored and the exit
program will be called with the list of objects.
*RESUME
You want to start the recovery from the point where the recovery stopped.
*SAVSYS
You want to restore the operating system based on the BRMS media content information.
*SYSBAS
You want to restore only the system (1) and basic user auxiliary storage pools (2-32) based on the
BRMS media content information.
Top
Action (ACTION)
You can either specify whether you want to create a Recovery Analysis Report or perform an actual
recovery.
*REPORT
You want to create the Recovery Analysis Report. This is recommended prior to restoring the
system or *IBM to assure that the required media is available and that all necessary saves have
been performed.
*RESTORE
You want to restore the requested items from the BRMS media content information.
Note: If you specify *RESTORE and have specified *SYSTEM for the Option (OPTION)
parameter, you will be returned to the Perform Recovery display.
Top
Time period for recovery (PERIOD)
Specifies the period of time for which the recovery items are selected for recovery. Selected items are
either included in the recovery report or recovered. This is dependent on the value specified in the
Action (ACTION) parameter.
Element 1: Start Time and date
Element 1: Beginning time
One of the following is used to specify the beginning creation time at which or after recovery items are
included. Any items created before the specified time and date are not included in the selected recovery
items.
*AVAIL
Any time that is available for the beginning date is included.
Start Recovery using BRM (STRRCYBRM) 389
begin-time
Specify the beginning time for the specified beginning date that indicates which recovery items
are to be included.
The time is specified in 24-hour format and can be specified with or without a time separator:
v Without a time separator, specify a string of 4 or 6 digits (hhmm or hhmmss) where hh=hours,
mm=minutes and ss=seconds. Hours, minutes, and seconds must each be exactly 2 digits
(using leading zeros if necessary).
v With a time separator, specify a string of 5 or 8 digits where the time separator specified for
your job is used to separate the hours, minutes, and seconds. If you enter this command from
the command line, the string must be enclosed in apostrophes. If a time separator other than
the separator specified for your job is used, this command will fail.
Element 2: Beginning date
One of the following is used to specify the beginning date on or after which the recovery items must
have been saved. Any entries saved prior to the specified date are not included in the recovery.
*BEGIN
Recovery items from the beginning of the media content information are recovered.
*CURRENT
Recovery items with a current date creation date and between the specified beginning and ending
times (if specified) are recovered.
begin-date
Specify the beginning date. The date must be specified in the job date format.
Element 2: End time and date
Element 1: Ending time
One of the following is used to specify the ending time before which recovery items are included. Any
items created after the specified time and date are not included in the recovery items selected for
recovery.
*AVAIL
Any time that is available for the ending date is included.
end-time
Specify the ending time for the specified ending date that indicates which recovery items are to
be included.
Element 2: Ending date
One of the following is used to specify the ending date on which or before which the recovery items
must have been saved. Any recovery items created after the specified date are not included in the
recovery operation.
*END The recovery items to the end of the recovery information are recovered.
*CURRENT
Recovery items whose save date is on or before the current date are included in the recovery.
end-date
Specify the ending date. The date must be specified in the job date format.
Top
390 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Use save files (USESAVF)
Specifies whether you want to use save files for recovery.
*YES You do want to use save files for recovery. If the library that you want to recover is saved both
on tape and a save file, and the save time and dates are the same, then BRMS will use the save
file for recovery.
*NO You do not want to use save files for recovery.
Top
Use ADSM (USEADSM)
Specifies whether data stored on the TSM (ADSM) server is included in the recovery. When the recovery
includes data saved to TSM servers, additional steps are added to the recovery report to assist in the
recovery of this data. During a full system recovery, the TSM server data is recovered after the system (1)
and basic user (2-32) auxiliary storage pool data is recovered and after the initial IPL. This assures the
necessary operating system resources are available for establishing the connection to the TSM server.
BRMS also makes recovery decisions based on where the recovery data resides. For example, when the
current full backup is stored on a TSM server, but incremental backups are stored on tape, the BRMS
report or plan will indicate that the full backup from the TSM server must occur first, followed by the
recovery of the incremental saves from tape.
*YES Include TSM data in the recovery report or plan.
*NO Do not include TSM data in the recovery report or plan.
Top
Auxiliary storage pool (ASP)
Specifies the system (1) or basic user (2-32) auxiliary storage pool that you want to restore. The ASP
parameter is a required field when the Option (OPTION) parameter is *ASP. If you are restoring the
system (1) auxiliary storage pool, only user data is restored, not the operating system.
*SYSTEM
You want to restore the system (1) auxiliary storage pool.
auxiliary storage pool name
Specify the name of the basic user auxiliary storage pool that you want to restore.
auxiliary-storage-pool-number
Specify the number of the system (1) or basic user (2-32) auxiliary storage pool that you want to
restore.
Top
Library (LIB)
Specifies the name of the library that you want to restore. Library is a required field when the Option
field contains *LIB.
library-name
Specify the name of the library that you want to restore.
generic*-library-name
Specify one or more generic names of groups of libraries that you want to restore. A generic
Start Recovery using BRM (STRRCYBRM) 391
name is a character string that contains one or more characters followed by an asterisk (*). If an *
is not specified with the name, the system assumes that the name is a complete library name.
Top
List (LIST)
Specifies the name of the list for the recovery operation.
When *LNKLIST is specified for the Option (OPTION) parameter the List (LIST) parameter specifies the
name of the integrated file system list that you want to restore. You can restore a single list or all lists.
*ALL All integrated file system lists are selected for recovery.
link-list-name
Specify the name of the integrated file system list that you want to restore.
Top
Journal (JRN)
Specifies the qualified names of the journals to be included in the apply journal changes operation. Up to
25 qualified names can be specified.
Restrictions:
v This parameter is only valid when *APYJRNCHG is specified for the Option (OPTION) parameter.
v *LCL must be specified for the From system (FROMSYS) parameter.
Single values
*JRNLST
The names of the journals to be included in the apply journal changes operation are retrieved
from a list of saved journals.
Qualifier 1: Journal
name Specify the name of the journal to be included in the apply journal changes operation.
Qualifier 2: Library
name Specify the name of the library containing the journal to be included in the apply journal changes
operation.
Top
ASP device (ASPDEV)
Specifies auxiliary storage pool devices which are to be included in the recovery of the current system.
Up to 25 iterations can be specified.
Restrictions:
v This parameter is only valid when *SYSTEM or *ASPDEV is specified for the Option (OPTION)
parameter.
v *LCL must be specified for the From system (FROMSYS) parameter.
392 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Note: To include objects in auxiliary storage pool devices saved on other systems in the recovery, the
current system must be receiving media content information from the systems which saved the auxiliary
storage pool device information.
Note: To recover objects in auxiliary storage pool devices saved on other systems, the current system
must have devices which support the density of the media volumes containing the saved items.
Element 1: From system
Specifies the system where the auxiliary storage pool device was saved.
*LCL Include auxiliary storage pool devices saved on the current system in the recovery.
system-name
Include auxiliary storage pool devices saved on the specified system in the recovery.
network-id.system-name
Include auxiliary storage pool devices saved on the specified system in the recovery. Format of
the system name is nnnnnnnn.cccccccc where nnnnnnnn is the network identifier and cccccccc is
the default local location name.
Element 2: Auxiliary storage pool
Specifies the name of the auxiliary storage pool device.
*ALL Include all auxiliary storage pool devices in the recovery.
auxiliary-storage-pool-name
Include the auxiliary storage pool device identified by this name in the recovery.
Element 3: Objects
Specifies the type of objects.
*ALL Include all objects in the recovery.
*LIB Include only library objects in the recovery.
*LNK Include only directory and file objects in the recovery.
Top
Control group selection (CTLGRP)
Specifies the name of the control group that you want to restore. The CTLGRP) parameter is a required
field when the Option (OPTION) parameter contains *CTLGRP. You can specify a single control group or
you can specify multiple control groups and sequence the order in which they are restored.
When you want to select a control group or groups from a list of control groups, specify *SELECT in the
CTLGRP parameter and press Enter. You are taken to the Select and Sequence Control Groups display
where all control groups that are in the media content information are displayed. You can select and
sequence each control group that you want to restore by putting a sequence number by each control
group to establish a relative restore order. Sequence numbers can range from 1 to 99. Up to 300 control
groups can be selected and can share the same sequence number.
If the full and incremental saves are done in different control groups, it would be necessary to specify
both control groups in order for the incremental entries to be selected. For example you could specify
STRRCYBRM OPTION(*CTLGRP) CTLGRP((A) (B)).
Start Recovery using BRM (STRRCYBRM) 393
A sequence number can be used with the control group names to ensure the sequence of the entries on
the report. Do not sequence the incremental control group ahead of the full control group. If this is done,
the full save will be restored over the incremental. It is a good idea to use different sequence numbers for
control groups that are running at the same time. Otherwise there may be alot of loading and unloading
of different tapes. For instance, control group C runs at the same time as A, and D the same time as B. In
this case STRRCYBRM OPTION(*CTLGRP) CTLGRP((A 10) (C 10) (B 20) (D 20) may be an appropriate
use of sequence numbers.
Single values
*SELECT
You want to select a control group or groups from a list of control groups to restore from the
media content information. This parameter can not be used in batch operations.
Other values (up to 300 repetitions)
Element 1: Control group
*NONE
You want to restore data that is not associated with a control group.
*BKUGRP
You want to restore the backup user data control group.
*SYSGRP
You want to restore the system data control group.
*SYSTEM
You want to restore the backup entire system control group.
control-group-name
Specify the name of the control group that you want to restore.
Element 2: Sequence number
sequence-number
Specify a number from 1 to 99 to indicate the order in which you want to restore selected control
groups. You can specify the same sequence number on several control groups.
Note: The sequence number is ignored if *NONE is specified in the CTLGRP parameter.
Top
Libraries to omit (OMITLIB)
Specifies the libraries you want to omit from recovery. You can choose to includes all libraries, or exclude
deleted libraries and/or specifies libraries, and/or generic libraries. Up to 25 iterations can be specified.
Single values:
*NONE
Include all libraries in the recovery.
Other values:
*DELETE
Exclude deleted libraries from the recovery.
library-name
Exclude the named library from recovery.
394 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*generic-library-name
Exclude libraries beginning with this generic name from recovery.
Top
Allow duplicate entries (ALWDUP)
Specifies whether to allow duplicate entries in the list of control groups that you can select to restore.
*NO Duplicate control group entries are not allowed in the Select and Sequence Control Groups
display.
*YES Duplicates are allowed in the Select and Sequence Control Groups display.
Top
Volume location (LOC)
Specifies the locations that you want to include in the recovery.
Single values
*ALL Include all locations that have been set up in BRMS.
Other values (up to 10 repetitions)
*HOME
Include the home location in the recovery.
location-name
Specify the name of the location that you want to include in the recovery. You can specify up to
10 locations.
Top
From system (FROMSYS)
Specifies the location and network identification of the system from which you want to restore media
information to the local system.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
Start Recovery using BRM (STRRCYBRM) 395
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Print system information (PRTSYSINF)
Specifies whether you want to include system information in recovery reports that you print when
processing this command. If you specify *YES, the Print System Information (PRTSYSINF) command is
processed.
*NO Do not included system information when recovery reports are printed.
*YES Include system information when recovery reports are printed.
Top
Use duplicate media (USEDUPMED)
Specifies whether you want to use the original save media or duplicate save media when selecting
history items for recovery. You may want to use this option if you move your original media offsite and
keep duplicates of the original media onsite. The default value is *NO.
*NO Specifies you want to use the original save media when selecting history items for recovery.
*YES Specifies you want to use duplicate media when selecting history items for recovery.
Top
User recovery (USRRCYINF)
Specifies whether you want user recovery information added to the BRMS Recovery Report (QP1ARCY)
created by this command.
Usage notes:
1. User recovery information can be included in the recovery report by adding records containing the
information to the appropriate members of file QO1AUSRRCY in library QUSRBRM. Add records to
member PROLOG to include user recovery information to the prolog information in the report. Add
records to members STEPnnn to include user recovery information to specific steps in the report,
where nnn is the step number as it appears on the report. Up to 92 bytes of user recovery information
can be added to each record. There is no limit to the number of records.
2. User recovery information is added to the report following the BRMS information and before any
saved items in the step. This information will be clearly highlighted on the report as user recovery
information.
3. Each record is read sequentially from the file member, starting from the first record and ending with
the last record, and will be added to the report in the same order as read. Each record will be placed
on the report following the last printed line starting in column 8.
4. The user is responsible for all spacing, positioning and translation of the recovery information in each
record.
5. The user is responsible for assuring the accuracy of the user recovery information.
6. The step numbers in the report differ depending on the value of the Option (OPTION) parameter
and the content of the recovery. If the OPTION or content is changed, the names of the members in
file QO1AUSRRCY may need to be renamed accordingly. The step numbers should be consistent if the
report type and saved item content are consistent.
396 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
7. No exception is signaled if user recovery information is requested but no records are found in the
members.
*NONE
Specifies no user recovery information is available for the report.
*ADD Specifies user recovery information is available and is to be added to the report.
Note: This value can only be specified if *REPORT is specified for the Action (ACTION)
parameter.
Top
Examples
Example 1: Print the Recovering Your Entire System Report
STRRCYBRM OPTION(*SYSTEM)
This command produces a recovery report to assist you in restoring the entire system which includes the
system (1) and basic user (2-32) auxiliary storage pools and any auxiliary storage pool devices.
Example 2: Omit Libraries from the Recovering Your Entire System Report
STRRCYBRM OPTION(*SYSTEM) OMITLIB(*DELETE QSC*)
This command produces a report to assist you in recovering the entire system which includes the system
(1) and basic user (2-32) auxiliary storage pools and any auxiliary storage pool devices. However, deleted
libraries and libraries beginning with the generic name QSC* are omitted from the report.
Example 3: Customize STEP 002 of the Recovering Your Entire System Report
Enter the following command to work with the user recovery information file.
WRKMBRPDM FILE(QUSRBRM/QO1AUSRRCY) MBR(STEP002)
Edit the member using option 2=Edit on member STEP002. Enter the detailed user recovery information
you want added to the report. When finished, exit the Edit display and indicate on the Exit display to
save the edit session changes.
Run the following command to print the report and validate the user recovery information in STEP 002.
Use the same command to generate all future reports using the user recovery information.
STRRCYBRM OPTION(*SYSTEM) USRRCYINF(*ADD)
The above steps show how to customized STEP 002 in the Recovering Your Entire System Report by
adding your own user recovery information. You might do this to provide your system operators with
special detailed guidance unique to your recovery. You can do this with any or all steps in the report.
Example 4: Print the Recovering Your Entire System Report for the Base System
STRRCYBRM OPTION(*SYSBAS)
This command produces a report to assist you in restoring the base system which includes the system (1)
and basic user (2-32) auxiliary storage pools, excluding any auxiliary storage pool devices.
Example 5: Print the Recovering Your Entire System Report for Auxiliary Storage Pool 2
STRRCYBRM OPTION(*ASP) ASP(2)
This command produces a report to assist you in restoring saved items to basic user auxiliary storage
pool 2.
Start Recovery using BRM (STRRCYBRM) 397
Example 6: Restore Auxiliary Storage Pool Device MYASP
STRRCYBRM OPTION(*ASP) ACTION(*RESTORE) ASP(MYASP)
This command present the Select Recovery Items display containing a list of storing objects saved items
from auxiliary storage pool device MYASP.
Example 7: Entire System Recovery Report with a Switched Auxiliary Storage Pool Device
STRRCYBRM ACTION(*REPORT) OPTION(*SYSTEM)
ASPDEV(SYSTEM_B PAYROLL)
This command produces a report to assist you in restoring the current system including auxiliary storage
pool device PAYROLL saved on SYSTEM_B. SYSTEM_B is a system in the BRMS network and is
networking media information about its saves to the current system.
Example 8: Applying Journal Changes
STRRCYBRM OPTION(*APYJRNCHG) JRN(*JRNLST)
This command prompts the BRMS Work with Journals using BRMS display. The display will be
populated with the names of journals which have been saved using BRMS. Use Option 1=Apply changes
to show the associated journals receivers on the Apply Journal Changes using BRMS display, then use
F16=Apply changes to apply journal changes.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
BRM61FF
Recovery completed with errors.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
398 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Start Subsystems using BRM (STRSBSBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Start Subsystems using BRM (STRSBSBRM) command restarts subsystems that have been ended as a
result of control group processing and have been specified with a value of *YES for the Restart field for
the control group Subsystems to process entries.
You can specify the control group name and the type of control group that you are restarting subsystems
for
Note: If you specify this command for a *EXIT backup item entry in a control group and specify the
current control group name for the CTLGRP parameter, this has the effect of restarting the subsystems,
defined in the Subsystems to Process for the current control group, earlier than these would normally
occur. Subsystems would normally be restarted during post processing after all saves have been
completed.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
CTLGRP Control group Name, *BKUGRP, *ARCGRP, *MGRGRP, *SYSGRP,
*SYSTEM
Optional
TYPE Type *BKU, *ARC, *MGR Optional
Top
Control group (CTLGRP)
Specifies the control group that you want to restart subsystems for
*BKUGRP
You want to restart the subsystems for the default backup user data control group.
*ARCGRP
You want to restart the subsystems for the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*MGRGRP
You want to restart the subsystems for the default migration control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*SYSGRP
You want to restart the subsystems for the default backup system data control group.
© Copyright IBM Corp. 1998, 2006 399
*SYSTEM
You want to restart the subsystems for the default backup entire system control group.
control-group-name
Specify the name of the control group for which you want to restart subsystems.
Top
Type (TYPE)
Specifies the type of control group that you have identified. Type is ignored if *SYSTEM, *BKUGRP,
*ARCGRP, *SYSGRP or *MGRGRP are specified for the CTLGRP parameter.
*BKU The control group is a backup control group.
*ARC The control group is an archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*MGR The control group is a migration control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
Top
Examples
STRSBSBRM CTLGRP(ARCHIVE01) TYPE(*ARC)
This command restarts subsystems after the archive control group ARCHIVE01 completes archive
processing.
Top
Error messages
*ESCAPE Messages
BRM1381
Control group &1 type &2 not found.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
400 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Verify Moves using BRM (VFYMOVBRM)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
The Verify Moves using BRM (VFYMOVBRM) command shows you the Verify Media Moves display. The
Verify Media Moves display allows you to verify individual media volume movement, verify all volumes
scheduled to move or cancel movement for individual or selected volumes. You can specify all systems or
a selected system to verify.
The Volume Movement Report is produced when you run the VFYMOVBRM command. The report is
written to printer file QP1AVMS.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
SYSNAME System name Character value, *ALL, *LCL Optional
Top
System name (SYSNAME)
Specifies the system identifier for which you want to verify media movement.
*ALL Include all media on all systems in the media selected for media movement.
*LCL Specifies that the system is the local system. BRMS uses the default local location name,
LCLLOCNAME and not the system name SYSNAME. In most cases, the systems have the same
value specified in the LCLLOCNAME and in the SYSNAME. You can use the DSPNETA
command to view the system network attributes.
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to use this value.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to use this value.
Top
© Copyright IBM Corp. 1998, 2006 401
Examples
Example 1: Verifying Media Movement
VFYMOVBRM
This command takes you to the Verify Media Moves display. Media chosen for media movement for all
systems in the network is displayed.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
402 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with ASP Descriptions (WRKASPBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with ASP Descriptions (WRKASPBRM) command takes you to the Work with ASP Descriptions
display or produces the ASP Descriptions report. The resulting display or report depends on the values
that you specify in the Work with ASP Descriptions command. You can specify an individual auxiliary
storage pool, all auxiliary storage pools or a generic auxiliary storage pool. You can further define your
request by ASP class and the sequence in which you want to sort the resulting output.
Output can be a display or printed report. The report that is produced is the ASP Descriptions report.
The report, if printed, is written to printer file QP1AXS.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v The BRMS Advanced feature (Option 2) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
ASP Auxiliary storage pool Generic name, name, *ALL, *NONE, *SYSTEM, 1, 2, 3, 4, 5,
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31, 32
Optional
ASPCLS ASP class Generic name, name, *ALL, *NONE Optional
SORT Sort sequence *NAME, *CLASS Optional
OUTPUT Output *, *PRINT Optional
Top
Auxiliary storage pool (ASP)
Specifies the name of the auxiliary storage pool or special value that you want to display or report.
*ALL All auxiliary storage pools are to be included in the display or report.
*NONE
Do not include any auxiliary storage pools in the display or report.
*SYSTEM
Only the system (1) auxiliary storage pool is to be included in the display or report.
generic*-ASP-name
Specify a generic auxiliary storage pool name. For example, specifying ASP0* would cause all
auxiliary storage pools whose names begin with ASP0 to be included in the report or on the
display.
© Copyright IBM Corp. 1998, 2006 403
ASP-name
Specify the name of an auxiliary storage pool to be included in the report or display.
ASP-number
Specify the number of the system (1) or basic user auxiliary storage pool (2-32) to be included in
the report or display.
Top
ASP class (ASPCLS)
Specifies the name of the ASP class or special value that you want to display or report.
*ALL All ASP classes are to be included in the display or report.
*NONE
Only auxiliary storage pools that have not been assigned to an ASP class are to be included in the
display or report.
generic*-ASP-class-name
Specify a generic ASP class name. For example, specifying MEDIUM* would cause all ASP classes
whose names begin with MEDIUM to be included in the report or on the display.
ASP-class-name
Specify the name of a specific ASP class to be included in the report or display.
Top
Sort sequence (SORT)
Specifies the order in which you want to to display or report the resulting information.
*NAME
The resulting display or report is sequenced in auxiliary storage pool name order. Auxiliary
storage pools that have no name are listed first.
*CLASS
The resulting display or report is sequenced in ASP class hierarchy order. ASPs which have not
been assigned to a class are shown last.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
404 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Examples
Example 1: Working with the System ASP
WRKASPBRM ASP(1)
This command will show the Work with ASP Descriptions panel for ASP 1, which is the system ASP.
From this panel you can review or change the description for the system ASP.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
CPF9800
All CPF98xx messages could be signaled. xx is from 01 to FF.
Top
Work with ASP Descriptions (WRKASPBRM) 405
406 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Calendars using BRM (WRKCALBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Calendars (WRKCALBRM) command works with all calendar entries by taking you to the
Work with Calendars display. From there you can add, remove, change, copy or display calendar
information. Output can be a display or printed report. The report that is produced is the Calendars
report. The report, if printed, is written to printer file QP1ACA.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v Calendar names can be up to ten characters in length and adhere to i5/OS naming conventions.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKCALBRM
This command displays the Work with Calendars panel.
Top
Error messages
*ESCAPE Messages
© Copyright IBM Corp. 1998, 2006 407
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
408 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Classes using BRM (WRKCLSBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Classes using BRM (WRKCLSBRM) command works with all or selected container,
auxiliary storage pool (ASP) or media classes. You can select a single class or all classes. Output can be a
display or printed report.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type *MED, *ASP, *CNR Optional,
Positional 1
OUTPUT Output *, *PRINT Optional
Top
Type (TYPE)
You can specify whether you want to display or report on media classes, ASP classes or container classes.
*MED You want to display or report on media classes. The report that is produced is the Media Class
report. The report, if printed, is written to printer file QP1AMT.
*ASP You want to display or report on ASP classes. The report that is produced is the ASP Class report.
The report, if printed, is written to printer file QP1AXC.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*CNR You want to display or report on container classes. The report that is produced is the Container
Class report. The report, if printed, is written to printer file QP1ACT.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
© Copyright IBM Corp. 1998, 2006 409
Examples
WRKCLSBRM TYPE(*CNR)
This command displays the Work with Container Classes panel.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
410 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Containers using BRM (WRKCNRBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Containers using BRM (WRKCNRBRM) command works with all or selected containers.
You can select all containers or those that are open or closed. Your selection can be further refined by
location. Output can be a display or printed report. The report that is produced is the Container report.
The report, if printed, is written to printer file QP1ACN.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
CNR Container ID Name, *ALL Optional,
Positional 1
STATUS Status *ALL, *CLOSED, *OPEN Optional,
Positional 2
LOC Location Name, *ALL, *HOME Optional,
Positional 3
CNRCLS Container class Name, *ALL Optional,
Positional 4
OUTPUT Output *, *PRINT Optional,
Positional 5
Top
Container ID (CNR)
Specifies whether you want to work with a specific container or all containers.
*ALL You want to work with all containers in the BRMS container inventory.
container-ID
Specify the container ID in the BRMS container inventory that you want to work with.
Top
Status (STATUS)
Specifies whether you want to work with all containers, open containers or closed containers. Open
containers can accept additional media volumes and closed containers cannot.
*ALL You want to work with all containers in the BRMS container inventory.
*CLOSED
You want to work with closed containers.
© Copyright IBM Corp. 1998, 2006 411
*OPEN
You want to work with open containers.
Top
Location (LOC)
Specifies a location that you want to work with. You can specify a single location, containers that are in
the home storage location, containers that are in other storage locations or all locations.
*ALL You want to work with all containers in all locations.
*HOME
You want to work with containers in the location *HOME.
location-name
Specify the location that contains the containers that you want to work with.
Top
Container class (CNRCLS)
Specifies the container class for the containers that you want to work with. Container classes define the
types of physical containers that are used to store and transport physical media classes. Container classes
are distinguished by attributes such as capacity and media class. For instance, there could be several
container classes for eight millimeter cartridges. One container class could be CONT8MM10 indicating
that this container class is used for eight millimeter cartridges and has a capacity of 10 cartridges. If you
used another container for eight millimeter cartridges that had a 25 cartridge capacity, you could set up
CONT8MM25 as a container class.
*ALL You want to work with all container classes that are assigned to the containers you are working
with.
container-class-name
Specify the user-defined name of the container class for the containers that you want to work
with.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKCNRBRM STATUS(*OPEN) LOC(*HOME)
This command displays the Work with Containers panel where all open containers that are at the home
location are displayed.
412 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
Work with Containers using BRM (WRKCNRBRM) 413
414 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Control Groups (WRKCTLGBRM)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Control Groups using BRM (WRKCTLGBRM) command allows you to produce a display
or report of backup, archive and migration control groups. If you display control group information you
are taken to the selected Work with Control Groups display where you can create, delete, change or
display control groups. If you report control group information, the selected control group report is
produced.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type *BKU, *ARC, *MGR Optional,
Positional 1
OUTPUT Output *, *PRINT Optional
Top
Type (TYPE)
Specifies the type of control group that you want to work with.
*BKU You want to work with backup control groups.
*ARC You want to work with archive control groups.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*MGR You want to work with migration control groups.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Note: OUTPUT(*PRINT) is only supported for TYPE(*MGR).
© Copyright IBM Corp. 1998, 2006 415
Top
Examples
WRKCTLGBRM
This command displays the Work with Backup Control Groups panel.
Top
Error messages
*ESCAPE Messages
BRM1039
&1 currently in use.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
416 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Devices using BRM (WRKDEVBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Devices using BRM (WRKDEVBRM) command works with all device entries by taking
you to the Work with Devices display. From there you can add, remove, change or display device
information. Output can be a display or printed report. The report that is produced is the Device report.
The report, if printed, is written to printer file QP1ADV.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKDEVBRM
This command displays the Work with Devices panel.
Top
Error messages
*ESCAPE Messages
BRM1240
Device &1 is not allowed.
© Copyright IBM Corp. 1998, 2006 417
BRM1291
Device entry &1 in use.
BRM1706
Media library &1 in use.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
418 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Saved Folders (WRKFLRBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Saved Folders using BRM (WRKFLRBRM) command displays or prints a report of saved
folders, including all subfolders. Folders are selected by date ranges and the resulting display/print can
be sequenced in several ways.
If the display option is selected, you can display the documents in each folder and restore them from the
media inventory. The report that is produced is the Saved Folders report. The report, if printed, is written
to printer file QP1AFD.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
FLR Folder Character value, *ALL Optional,
Positional 1
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SAVSTS Save status *ALL, *ERROR, *NOERROR Optional
SORT Sequence option *DATE, *FLR Optional
FROMSYS From system Character value, *LCL Optional
OUTPUT Output *, *PRINT Optional
Top
Folder (FLR)
Specifies the name of the folder or group of folders that you want to display or print.
*ALL Include all folders in the display or print.
folder-name
Specify the name of the folder that you want to display or print.
generic*-folder-name
Specify the generic folder name. For example, specifying ACCFLR* would cause all folder whose
names that begin with ACCFLR to be included in the display or print.
Top
© Copyright IBM Corp. 1998, 2006 419
Select dates (SLTDATE)
Specifies a range of dates that you want to use when displaying or printing saved folders. The From date
is the beginning of a date range of saved folders and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
Uses the earliest activity date for the beginning date of the date range.
*CURRENT
Use the current date for the beginning date of the date range.
from-date
Specify the date entered in job date format with or without date separators for the beginning date
of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END The last date that a folder was saved is the ending date of the date range that you want to use
for the search.
*CURRENT
Uses the current date for the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Save status (SAVSTS)
Specifies whether you want to display or report all successful saves, unsuccessful saves or both.
*ALL Include both successful and unsuccessful saves in the display or report.
*ERROR
Include only unsuccessful saves in the display or report.
*NOERROR
Include only successful saves in the display or report.
Top
420 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Sequence Option (SORT)
The Work with Saved Folders display or report can be sequenced several ways.
*DATE
Orders the display or report in date sequence.
*FLR Orders the display or report in folder sequence.
Top
From system (FROMSYS)
Specifies the location and network identification of the system whose folder information that you want to
work with.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKFLRBRM SLTDATE(*BEGIN *END)
This command displays the Work with Saved Folders panel, where all folders from the beginning of the
file to the end of the file are displayed.
Work with Saved Folders (WRKFLRBRM) 421
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
422 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Lists using BRM (WRKLBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Lists using BRM (WRKLBRM) command displays or prints a report of lists that you
select. You can select to display or print all lists, backup lists or archive lists. If the display option is
selected, you are taken to the Work with Lists display where you can create, remove, change or display
lists.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Type of usage *ALL, *ARC, *BKU Optional,
Positional 1
OUTPUT Output *, *PRINT Optional
Top
Type of usage (TYPE)
Specifies the type of list that you want to work with.
*ALL You want to work with all types of lists.
*ARC You want to work with archive lists.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU You want to work with backup lists.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
If you want to print the archive lists, the following reports are written to the associated printer files:
v Archive Folder List report - QP1AAF
v Archive Object List report - QP1AAO
© Copyright IBM Corp. 1998, 2006 423
v Archive Spooled File report - QP1AAQ
If you want to print the backup lists, the following reports are written to the associated printer files:
v Backup Folder List report - QP1AFL
v Backup Object List report - QP1AOB
v Backup Spooled File report - QP1ALQ
v Backup Object List report - QP1AFS
Top
Examples
WRKLBRM TYPE(*BKU)
This command displays the Work with Backup Lists panel.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
424 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Link Information (WRKLNKBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Link Information (WRKLNKBRM) command allows you to work with all or selected
directories that contain integrated file systems object link information. You are taken to the Work with
Link Information display where you can work with integrated file system object link information or
remove integrated file system object link information. Output can be a display or printed report.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
DIR Directory Path name, * Optional
SAVTYPE Save type Single values: *ALL
Other values (up to 3 repetitions): *ARC, *CUML, *FILE,
*FULL, *INCR, *NONE, *QBRM
Optional
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
FROMSYS From system Character value, *LCL Optional
OUTPUT Output *, *PRINT Optional
Top
Directory (DIR)
Specifies the path for the directories that you want to work with in a display or report.
* Include all directories in the display or report.
object-name-pattern
Specify the name of the object or a pattern to match the name(s) of the object(s) to be shown. The
object path name can be either a simple name or a name that is qualified with the name of the
directory in which the object is located. A pattern can be specified in the last part of the path
name. An asterisk (*) matches any number of characters and a question mark (?) matches a single
character. If the path name is qualified or contains a pattern, it must be enclosed in apostrophes.
Top
Save type (SAVTYPE)
Specifies the type of save items that you want to work with. You can specify all types of items, a specific
type or a mix of types.
© Copyright IBM Corp. 1998, 2006 425
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Single values
*ALL Work with all types of save items.
Other values (up to 3 repetitions)
*ARC Only work with save items that were a result of an archive process.
Note: The BRMS Advanced feature (Option 2) is required for this value.
*CUML
Only work with save items that were a result of an incremental (save changed objects) save.
*CUML indicates that the incremental save includes all objects that have been changed since the
last full save.
*FILE Only work with save items that were a result of native i5/OS save commands.
*FULL Only work with save items that were a result of a full save.
*INCR
Only work with save items that were a result of an incremental (save changed objects) save.
*INCR indicates that the incremental save includes all objects that have been changed since the
last incremental save.
*NONE
Only work with save items that have never been saved.
*QBRM
Work with BRMS media information items that have been saved.
Top
Select date (SLTDATE)
Specifies a range of dates that you want to use when selecting entries to include in the display or report.
The From date is the beginning point in the date range and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
The date of the earliest entry is the beginning date of the date range.
*CURRENT
The current date is the starting point of the range of dates to select for the display or report.
from-date
Specify the date entered in job date format with or without date separators that you want to be
the beginning date of the date range.
426 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
number-of-days
Specify the number of days before the current day that is the beginning date of the date range.
Element 2: To date
*END The last date is the ending date of the date range.
*CURRENT
The current date is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of the date range.
number-of-days
Specify the number of days before the current day that is the ending date of the date range.
Top
From system (FROMSYS)
Specifies the location and network identification of the system whose integrated file system information
that you want to display or print.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Work with Link Information (WRKLNKBRM) 427
Examples
WRKLNKBRM SLTDATE(*CURRENT *CURRENT)
This command displays the Work with Link Information panel where all integrated file system
information for the current date is displayed.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1867
Error writing file &1.
BRM1868
File &1 not opened successfully.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
BRM4117
Recovery of first media file required.
Top
428 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Locations using BRM (WRKLOCBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Locations using BRM (WRKLOCBRM) command allows you to work with all storage
locations. You can select a single location or all locations. Output can be a display or printed report. The
report that is produced is the Storage Location report. The report is written to the printer file QP1ASL.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKLOCBRM
This command displays the Work with Locations panel.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
© Copyright IBM Corp. 1998, 2006 429
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
430 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Media using BRM (WRKMEDBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Media using BRM (WRKMEDBRM) command works with active, expired or all media
volumes in the media inventory by creation and expiration date for any or all locations. The following
parameters can be used to tailor this display or printed report. The report that is produced is the Media
report. The report, if printed, is written to printer file QP1AMM.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Select volumes *BOTH, *ACT, *EXP Optional,
Positional 1
SLTCRTDATE Select creation dates Element list Optional
Element 1: Beginning
creation date
Character value, *BEGIN, *CURRENT
Element 2: Ending creation
date
Character value, *END, *CURRENT
SLTEXPDATE Select expiration dates Element list Optional
Element 1: Beginning
expiration date
Character value, *BEGIN, *CURRENT, *PERM
Element 2: Ending expiration
date
Character value, *END, *CURRENT
VOL Volume identifier Single values: *ALL
Other values (up to 50 repetitions): Character value
Optional
LOC From location Name, *ALL, *HOME Optional
CNR Container Name, *ALL Optional
MEDCLS Media class Name, *ALL Optional
SYSNAME System name Character value, *ALL, *LCL Optional
FILEGRP File group Name, *ALL, *NONE, *ARCGRP, *BKUGRP, *SYSGRP,
*SYSTEM
Optional
GRPTYPE File group type Name, *ALL, *ARC, *BKU, *NONE Optional
TEXT Text Character value, *ALL, *NONE, *generic* Optional
SORT Sequence *VOL, *CRT, *EXP, *LOC Optional
OUTPUT Output *, *PRINT Optional
Top
Select volumes (TYPE)
Use this parameter to specify the type of media volume that you want to display or print.
© Copyright IBM Corp. 1998, 2006 431
*BOTH
Displays or prints both active and expired media volumes.
*ACT Displays or prints only active media volumes.
*EXP Displays or prints only expired media volumes.
Top
Select creation dates (SLTCRTDATE)
Specifies a range of creation dates that you want to use when working with media. The Beginning
creation date is the beginning of a date range of media selected and the Ending creation date is the end
of the date range of creation dates.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: Beginning creation date
*BEGIN
Uses the earliest media volume creation date that is on the file for the beginning of the creation
date range.
*CURRENT
Uses the current date as the beginning of the creation date range.
beginning-creation-date
Specify a date that is the beginning of the creation date range. The date must be less than or
equal to the current date.
number-of-days
Specify the number of days before the current day that is used to determine the beginning date of
the date range.
Element 2: Ending creation date
*END The last creation date in the media inventory is used as the end of the creation date range.
*CURRENT
Uses the current date as the ending of the creation date range.
ending-creation-date
Specify a date that is the ending of the creation date range. The date must be equal to or greater
than the beginning creation date and less than or equal to the current date.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
432 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Select expiration dates (SLTEXPDATE)
Specifies a range of expiration dates that you want to use when working with media. The Beginning
expiration date is the beginning of a date range of media selected and the Ending expiration date is the
end of the date range of expiration dates.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: Beginning expiration date
*BEGIN
Uses the earliest media volume expiration date that is on the file for the beginning of the
expiration date range.
*CURRENT
Uses the current date as the beginning of the expiration date range.
beginning-expiration-date
Specify a date that is the beginning of the expiration date range. The date must be less than or
equal to the current date.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: Ending expiration date
*END The last expiration date in the media inventory is used as the end of the expiration date range.
*CURRENT
Uses the current date as the ending of the expiration date range.
ending-expiration-date
Specify a date that is greater than or equal to the beginning expiration date.
number-of-days
Specify the number of days after the current day that is used to determine the ending date of the
date range.
*PERM
Selects all media volumes that are marked with a permanent retention.
Top
Volume identifier (VOL)
Specifies the volume or volumes that you want to display in the Work with Media display or print.
Single values
*ALL You want to display or print all volumes in the media inventory that meet all specified
parameters.
Other values (up to 50 repetitions)
Work with Media using BRM (WRKMEDBRM) 433
generic*-volume-name
Specify the generic volume name. For example, specifying VOL* would cause all volumes whose
names that begin with VOL to be included in the display or print.
volume-name
Specify that you want to display or print the volume or volumes that meet all specified
parameters.
Top
From location (LOC)
Specifies the location of the media that you want to display or print.
*ALL Use the media volumes that reside in any storage location.
*HOME
Use the media volumes that reside in the local storage location, *HOME.
from-location-name
Specify the name of the media storage location.
Top
Container (CNR)
Specifies the container that you want to display or print. You can select a specific container or all
containers within a location.
*ALL Work with all containers that reside in a storage locations.
container-ID
Specify the name of the container you want to display or print.
Top
Media class (MEDCLS)
Specifies the media class that you want to display or print. You can select a specific media class or all
media classes.
*ALL Work with all media classes.
media-class-name
Specify the name of the media class that you want to display or print.
Top
System name (SYSNAME)
Specifies the system name whose media inventory that you want to display or print.
*ALL You want to display or print the media inventory for all system names.
*LCL Specifies that the system is the local system. BRMS uses the default local location name,
LCLLOCNAME and not the system name SYSNAME. In most cases, the systems have the same
value specified in the LCLLOCNAME and in the SYSNAME. You can use the DSPNETA
command to view the system network attributes.
434 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
location-name
Specify the name of the remote location associated with the system. The local system’s network
identifier, as seen by using the DSPNETA command, is used as the system’s network identifier.
Note: The BRMS Network feature (Option 1) is required to use this value.
network-id.location-name
Specify the network identifier and the name of the remote location associated with the system.
Specify these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the network
identifier and cccccccc is the remote location name.
Note: The BRMS Network feature (Option 1) is required to use this value.
Top
File group (FILEGRP)
Specifies the file group that you want to include on the volumes that you want to display or print.
*ALL Include all file groups that meet the other specifications for the media that you want to display or
print.
*NONE
Do not include file groups.
*ARCGRP
Include volumes that contain the default archive control group in the group of files.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
Include volumes that contain the default backup user data control group in the group of files.
*SYSGRP
Include volumes that contain the default system data control group in the group of files.
*SYSTEM
Include volumes that contain the default backup entire system control group in the group of files.
file-group
Specify the name of the file group whose volumes you want to display or print.
Top
File group type (GRPTYPE)
Specifies the type of file group that you want to display or print.
*ALL Include all types of file groups that meet the other specifications in the search.
*ARC Include file groups that are archive type file groups in the media that you want to display or
print.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU Include file groups that are backup type file groups in the media that you want to display or
print.
*NONE
Do not include any file group types in the media that you want to display or print.
Work with Media using BRM (WRKMEDBRM) 435
file-group-type
Specify the file group type that you want to include in the file groups that you want to display or
print.
Top
Text (TEXT)
Specifies the text related to the media with which you want to work. You can search for any string of
characters, and only those media inventory entries that contain the string of characters in the text are
included in the display or print.
*ALL You want to display or print all media inventory entries, regardless of the text.
*NONE
You want to display or print all media inventory entries that have blanks for text.
*generic*-text
Specify that you want to display or print all media inventory entries that have the text string
specified.
Top
Sequence (SORT)
Specifies the sort sequence that you want to use for this display or report.
*VOL Sorts the display or report in volume sequence.
*CRT Sorts the display or report in creation date sequence.
*EXP Sorts the display or report in expiration date sequence.
*LOC Sorts the display or report in location sequence.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
Example 1: Working with Expired Media
WRKMEDBRM TYPE(*EXP)
This command displays the Work with Media panel, where expired media are shown.
Example 2: Working with Active Media Sorted by Location
436 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
WRKMEDBRM TYPE(*ACT) SYSNAME(MYSYS) SEQ(*LOC)
This command displays the Work with Media panel, where active media that is in the media inventory
for a system named MYSYS are shown in location order.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
Work with Media using BRM (WRKMEDBRM) 437
438 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Media Information (WRKMEDIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Media Information using BRM (WRKMEDIBRM) command displays or reports media
information based on specified libraries, date ranges and sequences. The Work with Media Information
command shows the date and time each library was saved, the type of save, the volume serial and its
associated expiration date and the number of objects that were saved and the number that were not
saved. The command gives you the option to display or print the report. The report that is produced is
the Media Information report. The report, if printed, is written to printer file QP1AHS.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
LIB Library Generic name, name, *ALL, *ALLDLO, *LINK,
*LNKOMTLTS, *LNKOMTONL, *LTSOMTONL, *QHST,
*SAVCFG, *SAVSECDTA, *SAVSPLF, *SAVSYS
Optional,
Positional 1
VOL Volume Character value, *ALL Optional
ASP Auxiliary storage pool Character value, *ALL, *SYSTEM Optional
CTLGRP Control group Name, *ALL, *NONE, *ARCGRP, *BKUGRP, *SYSGRP,
*SYSTEM
Optional
SAVTYPE Save type Single values: *ALL
Other values (up to 3 repetitions): *ARC, *CUML, *FILE,
*FULL, *INCR, *NONE, *QBRM
Optional
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SAVSTS Save status *ALL, *ERROR, *NOERROR Optional
SORT Sequence option *DATE, *LIB, *VOL Optional
START Entries to be displayed first *LAST, *FIRST Optional
FROMSYS From system Character value, *LCL Optional
OUTPUT Output *, *PRINT Optional
Top
Library (LIB)
Specifies the name of the library or special value that you want to display or report.
*ALL All libraries are to be included in the media information report.
© Copyright IBM Corp. 1998, 2006 439
*ALLDLO
You want to display or print media information for all folders that you have saved using the
*ALLDLO special value.
*LINK
You want to display or print media information for all saves using the special value *LINK which
saves all IFS directories except files in /QSYS.LIB and /QDLS directories.
*LNKOMTLTS
You want to display or print media information for all saves using the special value
*LNKOMTLTS. This value saves all IFS directories and files except all Lotus server files and files
in /QSYS.LIB and /QDLS directories.
*LNKOMTONL
You want to display or print media information for all saves using the special value
*LNKOMTONL. This value saves all IFS directories and files except online Lotus server backup
files and files in /QSYS.LIB and /QDLS directories.
*LTSOMTONL
You want to display or print media information for all saves using the special value
*LTSOMTONL. This value saves all Lotus server files except online Lotus server files.
*QHST
You want to display or print media information for all entries you have saved using the *QHST
special value.
*SAVCFG
You want to display or print media information for all configurations that you have saved using
the *SAVCFG special value.
*SAVSECDTA
You want to display or print media information for all security data that you have saved using
the *SAVSECDTA special value.
*SAVSPLF
You want to display or print media information for all spooled files that you have saved in a list.
*SAVSYS
You want to display or print media information that was the result of using the *SAVSYS special
value.
library-name
Specify the name of a specific library on which you want to report media information.
generic*-library-name
Specify that the library name is generic. For example, specifying ACCTP* would cause all
libraries whose names begin with ACCTP to be included in the report or on the display.
Top
Volume (VOL)
Specifies the name of the media volume which you want to include in the Work with Media Information
display or *ALL if you want to include all volumes.
Note: If you specify *SAVF, the resulting display or report will include all BRMS saves to save files.
This is a required parameter.
*ALL You want to include all volumes in the media information display or report.
440 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
volume-identifier
Specify the name of a media volume on which you want to display or report media information.
Top
Auxiliary storage pool (ASP)
Specifies an auxiliary storage pool for the retrieved media information. Only those objects which reside
on the specified auxiliary storage pool when the save operation occurred will be displayed or reported.
*ALL You want to display or report all saved items from all auxiliary storage pools.
*SYSTEM
You want to display or report all saved items from the system (1) auxiliary storage pool.
auxiliary-storage-pool-number
You want to display or report all saved items from the auxiliary storage pool identified by this
number.
auxiliary-storage-pool-name
You want to display or report all saved items from the auxiliary storage pool identified by this
name.
Top
Control group
Specifies the name of the control group that you want to work with when displaying saved items.
*ALL Work with all control groups.
*NONE
Work with items that were not saved using a control group.
*ARCGRP
The name of the default archive control group because you want to work with items saved using
the default archive control group.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKUGRP
The name of the default backup control group because you want to work with items saved using
the default user data backup control group.
*SYSGRP
The default system backup control group because you want to work with items saved using the
default system data backup control group.
*SYSTEM
The default system backup control group because you want to work with items saved using the
default entire system backup control group.
control-group-name
Specify the name of the control group for the items that you want to work with.
Top
Work with Media Information (WRKMEDIBRM) 441
Save type (SAVTYPE)
Specifies the type of save items that you want to work with. You can specify all types of items, a specific
type or a mix of types.
You can enter multiple values for this parameter. If you are on an entry display and you need additional
entry fields to enter these multiple values, type a plus sign (+) in the entry field opposite the phrase ″+
for more″ and press the Enter key.
Single values
*ALL Work with all types of save items.
Other values (up to 3 repetitions)
*ARC Only work with save items that were a result of an archive process.
Note: The BRMS Advanced feature (Option 2) is required for this value.
*CUML
Only work with save items that were a result of an incremental (save changed objects) save.
*CUML indicates that the incremental save includes all objects that have been changed since the
last full save.
*FILE Only work with save items that were a result of native i5/OS save commands.
*FULL Only work with save items that were a result of a full save.
*INCR
Only work with save items that were a result of an incremental (save changed objects) save.
*INCR indicates that the incremental save includes all objects that have been changed since the
last incremental save.
*NONE
Only work with save items that have never been saved.
*QBRM
Work with BRMS media information items that have been saved.
Top
Select dates (SLTDATE)
Specifies a range of dates that you want to use when reporting on media information. The From date is
the beginning of a date range of media information and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
The earliest media information date on the file is the beginning date of a date range.
*CURRENT
The current date is the beginning date of a date range.
442 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
from-date
Specify the date in job date format with or without date separators that you want to be the
beginning date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END The last date found in the file is the end of the date range for the search.
*CURRENT
The current date is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Save status (SAVSTS)
Specifies whether you want to display or report all successful saves, unsuccessful saves or both.
*ALL You want to include both successful and unsuccessful saves in the display or report.
*ERROR
You want to include only unsuccessful saves in the display or report.
Note: Errors that are included are those that would have resulted in an abnormal completion
condition if you had used a native i5/OS save command for the save operation.
*NOERROR
You want to include only successful saves in the display or report.
Note: Objects that are not saved are not necessarily considered an error condition. For instance, if
one object within a library is in a locked condition during a save operation, and the remainder of
the objects in the library are not, a save operation of the library can complete successfully, even
though the locked object will be omitted. The omitted object will be indicated in the Not saved
column of the resulting Work with Media Information display or report.
Top
Sequence (SORT)
Specifies that the media information report is to be sequenced in several ways.
*DATE
Sequences the media information report by date.
*LIB Sequences the media information report by library.
*VOL Sequences the media information report by volume.
Top
Work with Media Information (WRKMEDIBRM) 443
Entries to be displayed first (START)
Specifies the starting position of the media information entries. The display station user can roll the
display up or down to see other media information entries if the media information entry is on another
display screen.
*LAST
Media information is shown starting with the last entry at the bottom of the display.
*FIRST
Media information is shown starting with the first entry at the top of the display.
Top
From system (FROMSYS)
Specifies the location and network identification of the system whose media that you want to work with.
Note: The values specified in the FROMSYS parameter are ignored if a volume identifier is specified in
the Volume (VOL) parameter. In this case the location and network identifier associated with the
specified volume is used.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
444 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Examples
WRKMEDIBRM LIB(MY*) SAVTYPE(*FULL) SORT(*LIB)
This command displays the Work with Media Information panel, where all libraries that begin with the
letters ’MY’ and were saved during a full save, are shown in library sequence.
Top
Error messages
*ESCAPE Messages
BRM1177
Cannot establish connection with remote system.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM2154
ASP value of *ALL must be specified.
BRM215A
ASP value of *ALL or 1-32 must be specified.
BRM4040
Access denied for user &1.
BRM4041
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
Work with Media Information (WRKMEDIBRM) 445
446 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Migration Info (WRKMGRIBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Migration Information using BRM (WRKMGRIBRM) command displays or reports
migration information based on specified items, item type, date range, migration status, migration policy,
source auxiliary storage pool and/or target auxiliary storage pool. Default values are provided to
produce the most inclusive display or report. A Sequence (SORT) parameter allows the user to specify
the sequence of the resulting output. The Entries to be displayed first (START) parameter determines
whether the resulting output is positioned at the beginning or end of the information. The report, if
printed, is written to printer file QP1AHH.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Restriction:
v The BRMS Advanced feature (Option 2) is required to use this command.
Top
Parameters
Keyword Description Choices Notes
TYPE Item type *FLR, *LIB Optional,
Positional 1
LIB Library Generic name, name, *ALL Optional
FLR Folder Generic name, name, *ALL Optional
FROMASP From ASP Character value, *ALL, *SYSTEM Optional
TOASP To ASP Character value, *ALL, *SYSTEM Optional
FROMASPCLS From ASP class Name, *ALL Optional
TOASPCLS To ASP class Name, *ALL Optional
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
MGRSTS Migration status *ALL, *ERROR, *NOERROR Optional
SORT Sequence *DATE, *FROMASP, *NAME, *TOASP Optional
START Entries to be displayed first *LAST, *FIRST Optional
OUTPUT Output *, *PRINT Optional
Top
Item type (TYPE)
Specifies the type of item whose migration information you want to display or report.
*LIB Migration information for libraries is to be included.
© Copyright IBM Corp. 1998, 2006 447
*FLR Migration information for first level folders is to be included.
Top
Library (LIB)
Specifies whether all libraries, a generic group of libraries or a single library is to be included in the
resulting display or report. This parameter is required when *LIB is specified in the Item type (TYPE)
parameter.
*ALL You want to include all libraries in the migration information display or report.
generic*-library-name
Specify a generic name of a library that you want to include. A generic name is a character string
that contains one or more characters followed by an asterisk (*). If an * is not specified with the
name, the system assumes that the name is a complete library name.
library-name
Specify the name of the library about which you want to display or report migration information.
Top
Folder (FLR)
Specifies whether all libraries, a generic group of libraries or a single folder is to be included in the
resulting display or report. This parameter is required when *FLR is specified in the Item type (TYPE)
parameter.
*ALL You want to include all libraries in the migration information display or report.
generic*-folder-name
Specify a generic name of a folder that you want to include. A generic name is a character string
that contains one or more characters followed by an asterisk (*). If an * is not specified with the
name, the system assumes that the name is a complete folder name.
folder-name
Specify the name of the folder about which you want to display or report migration information.
Top
From ASP (FROMASP)
Specifies all auxiliary storage pools or a single auxiliary storage pool from which items have been
migrated that you want to include in the display or report.
*ALL Include all auxiliary storage pools from which items have been migrated in the display or report.
*SYSTEM
Include only items that have been migrated from the system (1) auxiliary storage pool.
from-ASP-name
Specify the name of the auxiliary storage pool that you want to include in the display or report.
from-ASP-number
Specify the number of the auxiliary storage pool that you want to include in the display or
report.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
448 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
To ASP (TOASP)
Specifies all auxiliary storage pools or a single auxiliary storage pool to which items have been migrated
that you want to include in the display or report.
*ALL Include all auxiliary storage pools to which items have been migrated in the display or report.
*SYSTEM
Include only items that have been migrated to the system (1) auxiliary storage pool.
to-ASP-name
Specify the auxiliary storage pool name that you want to include in the display or report.
to-ASP-number
Specify the auxiliary storage pool number that you want to include in the display or report.
Note: UDFS, primary and secondary auxiliary storage pools are not supported for this parameter.
Top
From class (FROMASPCLS)
Specifies that auxiliary storage pools in all ASP classes or a single ASP class from which data has been
migrated are to be included in the display or report.
*ALL All ASP classes are included in the display or report.
from-ASP-class-name
Specify the ASP class that is to be included in the display or report.
Top
To ASP class (TOASPCLS)
Specifies that auxiliary storage pools in all ASP classes or a single ASP class to which data has been
migrated are to be included in the display or report.
*ALL All ASP classes are included in the display or report.
to-ASP-class-name
Specify the ASP class that is to be included in the display or report.
Top
Select dates (SLTDATE)
Specifies a range of dates that you want to use when reporting on migration information. The From date
is the beginning of a date range of migration information and the To date is the end of the date range.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Work with Migration Info (WRKMGRIBRM) 449
Element 1: From date
*BEGIN
The earliest migration information date on the file is the beginning date of a date range.
*CURRENT
The current date is the beginning date of a date range.
from-date
Specify the date in job date format with or without date separators that you want to be the
beginning date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END The last date found in the file is the end of the date range for the search.
*CURRENT
The current date is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Migration status (MGRSTS)
Specifies whether you want to display or report all successful migration information, unsuccessful
migration information or both.
*ALL You want to include both successful and unsuccessful migration information in the display or
report.
*ERROR
You want to include only unsuccessful migration information in the display or report.
*NOERROR
You want to include only successful migration information in the display or report.
Top
Sequence option (SORT)
Specifies the way in which migration information is to be sequenced.
*DATE
Sequences the migration information by date and time.
*FROMASP
Sequences the migration information by source auxiliary storage pool, target auxiliary storage
pool, date and time sequence.
*NAME
Sequences the migration information by item name and type.
450 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
*TOASP
Sequences the migration information by target auxiliary storage pool, source auxiliary storage
pool, date and time sequence.
Top
Entries to be displayed first (START)
Specifies the starting position of the migration information entries. The display station user can roll the
display up or down to see other migration information entries if the migration information entry is on
another display screen.
*LAST
Migration information is shown starting with the last entry at the bottom of the display.
*FIRST
Migration information is shown starting with the first entry at the top of the display.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKMGRIBRM ITEM(ABC*) TOASP(03)
This command displays the Work with Migration Information panel, where all libraries that begin with
the letters ’ABC’, and were migrated from any auxiliary storage pool (ASP) to ASP number 3, are
displayed in date sequence.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Work with Migration Info (WRKMGRIBRM) 451
Top
452 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Media Libraries (WRKMLBBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Media Libraries (WRKMLBBRM) command works with media libraries (MLB). Output
can be a display or printed report. The report that is produced is the Media Library report. The report, if
printed, is written to printer file QP1AMD.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional,
Positional 1
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKMLBBRM
This command displays the Work with Media Libraries panel.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
© Copyright IBM Corp. 1998, 2006 453
BRM1921
Feature not licensed.
BRM4040
Access denied for user &1.
BRM40A2
BRMS product initialization required.
Top
454 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Media Library Media (WRKMLMBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Media Library Media using BRM (WRKMLMBRM) command works with all media or
specific media in a media library device that you specify. Various parameters can be used to tailor this
display or report. The report that is produced is the Media Library Media report. The report, if printed, is
written to the printer file QP1A1MD.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
MLB Media library Name Required,
Positional 1
VOL Volume Character value, *ALL Optional
CGY Category Name, *ALL, *EJECT, *INSERT, *IPL, *NL, *NOSHARE,
*SHARE400
Optional
BRMVOL BRM volume *ANY, *NO, *YES Optional
MEDCLS Media class Name, *ALL Optional
OUTPUT Output *, *PRINT Optional
Top
Media library (MLB)
Use this parameter to specify the media library (MLB) that you want to display or print.
This is a required field.
Top
Volume (VOL)
Specifies all media, a generic media volume or the specific media volume that you want to display or
print.
*ALL Include all media for the selected media library in the display or report.
generic*-media-volume
Specify the generic name of a volume. A generic name is a character string of one or more
characters followed by an asterisk (*); for example ABC*. The asterisk (*) substitutes for any valid
characters. A generic name specifies all volumes with names that begin with the generic prefix,
for which the user has authority. If an asterisk is not included with the generic (prefix) name, the
system assumes it to be the complete volume name.
© Copyright IBM Corp. 1998, 2006 455
media-volume
Specify the media volume for the selected media library device that you want to include in the
display or report.
Top
Category (CGY)
Specifies which media by category from the selected media library (MLB) to include in the display or
print.
*ALL All media in the MLB is to be included in the display or report.
Note: If you have defined your own media categories, they will not be included when you
specify CGY(*ALL).
*CNV Only convenience station media in the selected MLB is included in the display or report.
*EJECT
Only media in the eject mode in the selected MLB is included in the display or report.
*INSERT
Only media already in the MLB which does not have a category such as *SHARE400 or
*NOSHARE and which are otherwise not assigned to a system is to be included in the display or
report.
*IPL Only alternate IPL media in the selected MLB is included in the display or report.
*NL Only non-labeled media in the selected MLB is included in the display or report.
*NOSHARE
Only private media already added to the MLB are to be included in the display or report. Private
media are those which are only able to be used by this system.
*SHARE400
Only share media already added to the MLB are to be included in the display or report.
category-name
Specify the user defined media category name.
Top
BRM volume (BRMVOL)
Specifies whether you want to include only BRMS media, non-BRMS media or any media in the display
or report.
*ANY Any media, whether registered in BRMS or not, is included in the display or report.
*NO Only non-BRMS media is included in the display or report.
*YES Only media registered in BRMS is included in the display or report.
Top
Media class (MEDCLS)
Specifies the media class that you want to select for the specified media library. You can select a specific
media class or all media classes.
*ALL Select all media regardless of the media class.
456 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
media-class-name
Specify the name of the media class that you want to use with the specified media library.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKMLMBRM MLB(MLB01) BRMVOL(*YES)
This command displays the Work with Media Library Media panel, where BRMS media that is used by
MLB01 is shown.
Top
Error messages
*ESCAPE Messages
BRM1232
Media class &1 not found.
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
Work with Media Library Media (WRKMLMBRM) 457
458 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Saved Objects (WRKOBJBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Saved Objects using BRM (WRKOBJBRM) command prints/displays a report of saved
objects. Groups of objects are selected by date ranges and the resulting display or report can be
sequenced in several ways. If the display option is selected, you can restore objects from the media
inventory. The report that is produced is the Saved Objects report. The report, if printed, is written to
printer file QP1AOD.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OBJ Object Qualified object name Optional,
Positional 1 Qualifier 1: Object Name, *ALL
Qualifier 2: Library Name, *ALL
OBJTYPE Type Character value, *ALL Optional,
Positional 2
ASP Auxiliary storage pool Character value, *ALL, *SYSTEM Optional
SLTDATE Select dates Element list Optional,
Positional 3 Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SAVSTS Save status *ALL, *ERROR, *NOERROR Optional
INFTYPE Object information *ALL, *DLO, *MBR, *OBJ Optional
SORT Sequence option *SAVDAT, *LIB, *OBJ Optional
FROMSYS From system Character value, *LCL Optional
OUTPUT Output *, *PRINT Optional
Top
Object (OBJ)
Specifies the name and library of the object or group of objects that you want to display or print.
Qualifier 1: Object
*ALL Include all objects that are the object types specified in the Type (TYPE) parameter in the Work
with Saved Objects display or report.
object-name
Specify the name of a specific object for which you want to produce the Work with Saved Objects
display or print.
© Copyright IBM Corp. 1998, 2006 459
Qualifier 2: Library
*ALL Search all libraries for objects to include in the Work with Saved Objects display or report.
library-name
Specify the name of a specific library to search for objects to included in the display or print.
Top
Type (OBJTYPE)
Specifies the type of object that you want to display or print.
*ALL Include all object types in the display or print.
object-type
Specify the object type that you want to display or print.
Top
Auxiliary storage pool (ASP)
Specifies the auxiliary storage pool that contained the saved objects you want to display or report.
*ALL You want to include saved objects in all auxiliary storage pools.
*SYSTEM
You want to include saved objects that were in the system (1) auxiliary storage pool.
auxiliary-storage-pool-number
Specify the number of an auxiliary storage pool that contained the saved objects you want to
include.
auxiliary-storage-pool-name
Specify the name of an auxiliary storage pool that contained the saved objects that you want to
include.
Top
Select dates (SLTDATE)
Specifies a range of dates that you want to use when reporting on saved objects. The From date is the
beginning of a date range and the To date is the end of a date range of saved objects.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
Uses the earliest date in the file for the beginning date of the date range.
*CURRENT
Uses the current date for the beginning date of the date range.
460 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
from-date
Specify the date in job date format with or without date separators that you want to use as the
beginning date of the date range.
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END Use the last date that an object was saved as the ending date in the date range that you want to
use for the search.
*CURRENT
Uses the current date as the ending date of the date range.
to-date
Specify the date in job date format with or without date separators to use as the ending date of
the date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Save status (SAVSTS)
Specifies whether you want to display or report all successful saves, unsuccessful saves or both.
*ALL Include both successful and unsuccessful saves in the display or report.
*ERROR
Include only unsuccessful saves in the display or report.
*NOERROR
Include only successful saves in the display or report.
Top
Object information (INFTYPE)
Specifies whether you want to display or report all objects or selected objects.
*ALL Include all objects in the display or report.
*DLO Include only DLO objects in the display or report.
*MBR Include only members in the display or report.
*OBJ Include only non-DLO objects in the display or report.
Top
Sequence Option (SORT)
The saved object display or report can be sequenced several ways.
*SAVDAT
Orders the list in save date sequence.
Work with Saved Objects (WRKOBJBRM) 461
*LIB Orders the list in library sequence.
*OBJ Orders the list in object sequence.
Top
From system (FROMSYS)
Specifies the location and network identification of the system whose object information that you want to
work with.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
Example 1: Working with Objects Not Successfully Saved
WRKOBJBRM SAVSTS(*ERROR) INFTYPE(*OBJ) SORT(*OBJ)
This command displays the Work with Saved Objects panel, where all objects that were not successfully
saved are displayed in object name sequence.
Top
462 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
Work with Saved Objects (WRKOBJBRM) 463
464 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Policies using BRM (WRKPCYBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Policies using BRM (WRKPCYBRM) command specifies the BRMS policy with which you
want to work.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
TYPE Policy type *MOV, *ARC, *BKU, *MED, *MGR, *RCY, *RTV, *SYS Optional,
Positional 1
OUTPUT Output *, *PRINT Optional
Top
Type of policy (TYPE)
Specifies the type of policy that you want to work with or print.
*MOV
You want to work with or print move policies. The report that is produced is the Move Policy
report. The report, if printed, is written to printer file QP1AMP.
*ARC You want to work with or print the archive policy. The report that is produced is the Archive
Policy report. The report, if printed, is written to printer file QP1AAX.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*BKU You want to work with or print the backup policy. The report that is produced is the Backup
Policy report. The report, if printed, is written to printer file QP1ABX.
*MED You want to work with or print media policies. The report that is produced is the Media Policy
report. The report, if printed, is written to printer file QP1AME.
*MGR You want to work with or print migration policies. The report that is produced is the Migration
Policy report. The report, if printed, is written to printer file QP1AHX.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
*RCY You want to work with or print the recovery policy. The report that is produced is the Recovery
Policy report. The report, if printed, is written to printer file QP1ARX.
*RTV You want to work with or print the retrieve policy. The report that is produced is the Retrieve
Policy report. The report, if printed, is written to printer file QP1ARP.
Note: The BRMS Advanced feature (Option 2) is required to use this value.
© Copyright IBM Corp. 1998, 2006 465
*SYS You want to work with or print the system policy. The report that is produced is the System
Policy report. The report, if printed, is written to printer file QP1ASP.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKPCYBRM TYPE(*MED)
This command displays the Work with Media Policies panel.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
466 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Recovery Activities (WRKRCYBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Recovery Activities using BRM (WRKRCYBRM) command creates a display or report of
recovery activities that you have defined to BRMS. If you request a display, you are taken to the Work
with Recovery Activities display where you can add, change or remove recovery activities. The report
that is produced is the Recovery Activities report. The report, if printed, is written to printer file
QP1ARW.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKRCYBRM
This command displays the Work with Recovery Activities panel.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
© Copyright IBM Corp. 1998, 2006 467
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
468 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Save Files (WRKSAVFBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Save Files using BRM (WRKSAVFBRM) command displays or prints a report of all save
files that are on the BRMS media content information. Information in the display or report includes save
information such as date and time of save, auxiliary storage pool number and so on.
If the display option is selected, The Work with Save Files display allows you to display, remove and
expire save files. Additionally, you can select object detail to review or restore objects from a save file.
The report that is produced is the BRM Saved Files report. The report, if printed, is written to printer file
QP1ASF.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTPUT Output *, *PRINT Optional,
Positional 1
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
WRKSAVFBRM
This command displays the Work with Save Files panel.
Top
© Copyright IBM Corp. 1998, 2006 469
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
BRM40A2
BRMS product initialization required.
Top
470 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Work with Saved Spooled Files (WRKSPLFBRM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
The Work with Saved Spooled Files using BRM (WRKSPLFBRM) command creates a display or report of
saved spooled files based on specified libraries, output queues, auxiliary storage pools, files, job names,
users, date ranges and sequences. Processing the Work with Saved Spooled Files command takes you to
the Work with Saved Spooled Files display where you can remove, display or retrieve selected spooled
file entries as well as work with media that contains saved spooled files. If you want to produce a report,
the report that is produced is the Saved Spooled File report. The report, if printed, is written to printer
file QP1AOQ.
To use this command, you must have the Backup Recovery and Media Services for iSeries, 5722-BR1,
licensed program installed.
Top
Parameters
Keyword Description Choices Notes
OUTQ Output queue Qualified object name Optional,
Positional 1 Qualifier 1: Output queue Name, *ALL
Qualifier 2: Library Name, *ALL
ASP Auxiliary storage pool Character value, *ALL, *SYSTEM Optional,
Positional 2
FILE File Name, *ALL Optional,
Positional 3
JOB Job name Name, *ALL Optional,
Positional 4
USER User Name, *ALL Optional,
Positional 5
USRDTA User data Character value, *ALL Optional,
Positional 6
SLTDATE Select dates Element list Optional
Element 1: From date Character value, *BEGIN, *CURRENT
Element 2: To date Character value, *END, *CURRENT
SAVSTS Save status *ALL, *ERROR, *NOERROR Optional
SORT Sequence option *DATE, *FILE, *JOB Optional
FROMSYS From system Character value, *LCL Optional
OUTPUT Output *, *PRINT Optional
Top
© Copyright IBM Corp. 1998, 2006 471
Output queue (OUTQ)
Specifies the name of the library and output queue that you want to include in the display or report.
Qualifier 1: Output queue
*ALL Include all output queues in the display or report.
output-queue-name
Specify the name of an output queue that you want to include in the display or report.
Qualifier 2: Library
*ALL All libraries or special values containing the spooled files are to be included in the list of spooled
files.
library-name
Specify the name of a library that contained the spooled file.
Top
Auxiliary storage pool (ASP)
Specifies the auxiliary storage pool that contained the spooled files when the spooled files were saved.
*ALL Include all auxiliary storage pools that contained saved spooled files in the report or display.
*SYSTEM
You want to include saved spooled files that were in the system (1) auxiliary storage pool in the
report or display.
auxiliary-storage-pool-number
Specify the number of an auxiliary storage pool that contained the saved spooled filed you want
to include in the report or display.
auxiliary-storage-pool-name
Specify the name of an auxiliary storage pool that contained the saved spooled file that you want
to include in the report or display.
Top
File (FILE)
Specifies the name of the printer file that contained the spooled file when it was saved that you want to
include in the display or report.
*ALL Include all files in the display or report.
file-name
Specify the name of a file that you want to include in the display or report.
Top
Job name (JOB)
Specifies the name of the job that which created the spooled file that you want to include in the display
or report.
*ALL Include all spooled files for jobs in the display or report.
472 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
job-name
Specify the name of a job whose files are to be included in the display or report.
Top
User (USER)
Specifies the name of the user that created the spooled file that you want to include in the display or
report.
*ALL Include files for all users in the display or report.
user-name
Specify the name of a user whose files are to be included in the display or report.
Top
User data (USRDTA)
Specifies the data associated with the spooled file that was saved and that you want to include in the
display or report.
*ALL Include all user data in the display or report.
user-data
Specify the user data that you want to include in the display or report.
Top
Select dates (SLTDATE)
Specifies a range of dates that you want to use when reporting on saved spooled files. The From date is
the beginning of a date range and the To date is the end of the date range.
Note: The From date is based on the date the spooled file was created.
Note: Using this parameter, it is possible to enter a date with no separator, or a number of days which
can be up to 5 digits in length. For instance, if you are using month/day/year format, the number 12904
would be formatted as January 29, 2004. If on the other hand, you entered a number 13904, BRMS
assume that this is not a date, but rather is a number. BRMS always tries to calculate a calendar date first
when a number is entered and then if the date it calculates is not valid, assumes that it is a number of
days. If the number that is entered is over 5 digits and the date that it calculates is not valid, you receive
an error message.
Element 1: From date
*BEGIN
The earliest save date on the file is the beginning date of a date range.
*CURRENT
The current date is the beginning date of a date range.
from-date
Specify the date in job date format with or without date separators that you want to be the
beginning date of a date range.
Work with Saved Spooled Files (WRKSPLFBRM) 473
number-of-days
Specify the number of days before the current day that is used to determine the starting date of
the date range.
Element 2: To date
*END The last date found in the file is the end of the date range for the search.
*CURRENT
The current date is the ending date of the date range.
to-date
Specify the date in job date format with or without date separators that you want to be the
ending date of a date range.
number-of-days
Specify the number of days before the current day that is used to determine the ending date of
the date range.
Top
Save status (SAVSTS)
Specifies whether you want to display or report all successful saves, unsuccessful saves or both.
*ALL You want to include media information that was saved successfully and unsuccessfully in the
display or report.
*ERROR
You want to include only unsuccessful saves in the display or report.
*NOERROR
You want to include only successful saves in the display or report.
Top
Sequence option (SORT)
The saved spooled file report can be sequenced several ways.
*DATE
Sequences the saved spooled file report by date.
*FILE Sequences the saved spooled file report by file.
*JOB Sequences the saved spooled file report by job.
Top
From system (FROMSYS)
Specifies the location and network identification of the system whose spooled file information that you
want to work with.
Note: Use the Display Network Attributes (DSPNETA) command to view the system network attributes.
Note: The BRMS Network feature (Option 1) is required to use this value if a value other than *LCL is
specified.
*LCL Specifies that the from-system is the local system. BRMS uses the Default local location name
474 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
(LCLLOCNAME) network attribute and not the System name (SYSNAME) network attribute to
determine the current system name. In most cases, the systems have the same value specified for
LCLLOCNAME as for SYSNAME.
location-name
Specifies the Default local location name (LCLLOCNAME) network attribute of the remote
system for the network operation. The current system Local network ID (LCLNETID) network
attribute is used to connect with the remote system.
network-id.location-name
Specifies the Local network ID (LCLNETID) and the Default local location name
(LCLLOCNAME) network attributes of the remote system for the network operation. Specify
these values using the format nnnnnnnn.cccccccc where nnnnnnnn is the LCLNETID and cccccccc
is the LCLLOCNAME.
Top
Output (OUTPUT)
Specifies whether the output from the command is displayed at the requesting work station or printed
with the job’s spooled output.
* The output is displayed (if requested by an interactive job) or printed (if requested by a batch
job).
*PRINT
The output is printed with the job’s spooled output.
Top
Examples
Example 1: Work with Saved Spooled Files by Date
WRKSPLFBRM SLTDATE(’1/1/03’ ’4/2/03’) SORT(*JOB)
This command displays the Work with Saved Spooled Files panel, showing a list of all spooled files that
were saved from January 1 to April 2, 2003. The spooled files are displayed in job sequence.
Example 2: Work with Saved Spooled Files by ASP
WRKSPLFBRM ASP(PRIMETIME)
This command displays the Work with Saved Spooled Files panel, showing a list of all spooled files that
were saved from auxiliary storage pool device PRIMETIME. The spooled files are displayed in date
sequence.
Top
Error messages
*ESCAPE Messages
BRM1917
Feature not installed.
BRM1921
Feature not licensed.
Work with Saved Spooled Files (WRKSPLFBRM) 475
BRM2154
ASP value of *ALL must be specified.
BRM215A
ASP value of *ALL or 1-32 must be specified.
BRM40A2
BRMS product initialization required.
Top
476 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Appendix. Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries.
Consult your local IBM representative for information on the products and services currently available in
your area. Any reference to an IBM product, program, or service is not intended to state or imply that
only that IBM product, program, or service may be used. Any functionally equivalent product, program,
or service that does not infringe any IBM intellectual property right may be used instead. However, it is
the user’s responsibility to evaluate and verify the operation of any non-IBM product, program, or
service.
IBM may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
500 Columbus Avenue
Thornwood, NY8809
U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property
Department in your country or send inquiries, in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any other country where such
provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of
the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the
exchange of information between independently created programs and other programs (including this
one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Corporation
© Copyright IBM Corp. 1998, 2006 477
Software Interoperability Coordinator, Department 49XA
3605 Highway 52 N
Rochester, MN 55901
U.S.A.
Such information may be available, subject to appropriate terms and conditions, including in some cases,
payment of a fee.
The licensed program described in this information and all licensed material available for it are provided
by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement, or
any equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of those products, their
published announcements or other publicly available sources. IBM has not tested those products and
cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM
products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of
those products.
This information contains examples of data and reports used in daily business operations. To illustrate
them as completely as possible, the examples include the names of individuals, companies, brands, and
products. All of these names are fictitious and any similarity to the names and addresses used by an
actual business enterprise is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrate programming
techniques on various operating platforms. You may copy, modify, and distribute these sample programs
in any form without payment to IBM, for the purposes of developing, using, marketing or distributing
application programs conforming to the application programming interface for the operating platform for
which the sample programs are written. These examples have not been thoroughly tested under all
conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these
programs. You may copy, modify, and distribute these sample programs in any form without payment to
IBM for the purposes of developing, using, marketing, or distributing application programs conforming
to IBM’s application programming interfaces.
Each copy or any portion of these sample programs or any derivative work, must include a copyright
notice as follows:
(C) IBM 2006. Portions of this code are derived from IBM Corp. Sample Programs. (C) Copyright IBM
Corp. 1998, 2006. All rights reserved.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
The following terms are trademarks of International Business Machines Corporation in the United States,
other countries, or both:
Advanced Function Printing
AFP
AS/400
CICS
COBOL/400
C/400
DataPropagator
DB2
478 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
IBM
Infoprint
InfoWindow
iSeries
LPDA
OfficeVision
i5/OS
Print Services Facility
RPG/400
SystemView
System/36
TCS
WebSphere
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the
United States, other countries, or both.
Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other
countries, or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
Terms and conditions
Permissions for the use of these publications is granted subject to the following terms and conditions.
Personal Use: You may reproduce these publications for your personal, noncommercial use provided that
all proprietary notices are preserved. You may not distribute, display or make derivative works of these
publications, or any portion thereof, without the express consent of IBM.
Commercial Use: You may reproduce, distribute and display these publications solely within your
enterprise provided that all proprietary notices are preserved. You may not make derivative works of
these publications, or reproduce, distribute or display these publications or any portion thereof outside
your enterprise, without the express consent of IBM.
Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either
express or implied, to the publications or any information, data, software or other intellectual property
contained therein.
IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of
the publications is detrimental to its interest or, as determined by IBM, the above instructions are not
being properly followed.
You may not download, export or re-export this information except in full compliance with all applicable
laws and regulations, including all United States export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE
PUBLICATIONS ARE PROVIDED ″AS-IS″ AND WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Appendix. Notices 479
480 IBM Systems - iSeries: Backup Recovery and Media Services for iSeries Commands
Printed in USA
Voir également :
IBM Systems - iSeries
AFP Utilities for iSeries Commands
Version 5 Release 4
IBM Systems - iSeries
AFP Utilities for iSeries Commands
Version 5 Release 4
Note
Before using this information and the product it supports, be sure to read the information in
“Notices,” on page 39.
Second Edition (February 2006)
This edition applies to version 5, release 4, modification 0 of AFP Utilities for iSeries (product number 5722-AF1)
and to all subsequent releases and modifications until otherwise indicated in new editions. This version does not
run on all reduced instruction set computer (RISC) models nor does it run on CICS models.
© Copyright International Business Machines Corporation 1998, 2006. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Convert Overlay to PFM (CVTOVLPFM) 1
Convert Page Segment to PFM
(CVTPAGSPFM) . . . . . . . . . . . 5
Convert PCD to Page Segment
(CVTPCDPAGS) . . . . . . . . . . . 9
Convert PFM to Page Segment
(CVTPFMPAGS) . . . . . . . . . . . 15
Print PFD Data (PRTPFDDTA) . . . . . 23
Start AFP Utilities (STRAFPU) . . . . . 29
Start Overlay Utility (STROVLU) . . . . 31
Start Print Format Utility (STRPFU) . . 35
Appendix. Notices . . . . . . . . . . 39
© Copyright IBM Corp. 1998, 2006 iii
iv IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert Overlay to PFM (CVTOVLPFM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert Overlay to PFM
This command allows you to convert an overlay to a member in a physical database file.
Error messages for CVTOVLPFM
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
OVL Overlay Qualified object name Required,
Positional 1 Qualifier 1: Overlay Name
Qualifier 2: Library Name, *LIBL, *CURLIB
DTAFMT Format of data *FIXED, *CONTINUOUS Required,
Positional 2
FILE To file Qualified object name Required,
Positional 3 Qualifier 1: To file Name, *VM, *MVS
Qualifier 2: Library Name, *CURLIB
MBR To member Name, *OVL Optional,
Positional 4
TEXT Text ’description’ Character value, *OVLTXT Optional
REPLACE Replace *YES, *NO Optional
CRTFILE Create file *YES, *NO Optional
FILETEXT Text ’description’ Character value, *BLANK Optional
Top
Overlay (OVL)
Specifies the qualified name of the overlay that is converted. This is a required parameter.
The possible library values are:
*LIBL The library list is used to locate the overlay.
*CURLIB
The current library for the job is used to locate the overlay. If no library is specified as the current
library for the job, QGPL is used.
© Copyright IBM Corp. 1998, 2006 1
library-name
Specify the library where the overlay resides.
Top
Format of data (DTAFMT)
Specifies how data are filled in a physical file member.
The possible values are:
*FIXED
One record has one structured field. The padding character is binary 0s. The record length of the
file using fixed format is the longest length of the AFPDS structured fields in the overlay or the
page segment. If the length of the existing file is smaller than the longest length of the structured
field, an error message is displayed. If the length of the existing file is larger than the longest
length of the structured field, padding characters are added to the end of the records. This format
is for the VM system or the MVS system.
*CONTINUOUS
The structured fields are filled continuously and folded. Only the last record has padding
characters; the padding characters are binary 0s. Any record length of the existing file is allowed.
The created record length of the file is 256 bytes. This format is for the OS/2 system.
This is a required parameter.
Top
File (FILE)
Specifies the qualified name of the physical file being used to fill the overlay data.
The possible values are:
*VM Specifies that the name OVLY38PP is used. It will be a valid filetype for an overlay on the VM
system.
*MVS Specifies that the name O1xxxxxx is used. The ’xxxxxx’ is the first six valid characters of the
name specified in the OVL parameter. It will be a valid member name for an overlay on the MVS
system.
physical-file-name
Type the name of a physical file used to fill the overlay data.
The possible library values are:
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the current
library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
2 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Member (MBR)
Specifies the name of the physical file member which is filled with the overlay data.
The possible values are:
*OVL Specifies the name of the overlay specified in the OVL parameter.
member-name
Specify the name of a member used to fill the overlay data.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the member and its function.
The possible values are:
*OVLTXT
Specifies the same description specified in the OVL parameter.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the physical file member replaces the existing physical file member if a physical
file member of the same name already exists in the library.
The possible values are:
*NO A new physical file member is not created if an old physical file member of the same name
already exists in the library.
*YES A new physical file member is created and the old physical file member is replaced by it.
Top
Create file (CRTFILE)
Specifies whether or not the file is created if the file does not exist.
The possible values are:
*NO Do not create the file.
*YES Create the file.
Top
Convert Overlay to PFM (CVTOVLPFM) 3
Text ’description’ (FILETEXT)
Specifies text that briefly describes the file and its function. This prompt is valid only when CRTFILE
parameter is *YES.
The possible values are:
*BLANK
No text is specified.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
4 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert Page Segment to PFM (CVTPAGSPFM)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert Page Segment to PFM
This command allows you to convert a page segment to a member in a physical database file.
Error messages for CVTPAGSPFM
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required,
Positional 1 Qualifier 1: Page segment Name
Qualifier 2: Library Name, *LIBL, *CURLIB
DTAFMT Format of data *FIXED, *CONTINUOUS Required,
Positional 2
FILE To file Qualified object name Required,
Positional 3 Qualifier 1: To file Name, *VM, *MVS
Qualifier 2: Library Name, *CURLIB
MBR To member Name, *PAGSEG Optional,
Positional 4
TEXT Text ’description’ Character value, *PSGTXT Optional
REPLACE Replace *YES, *NO Optional
CRTFILE Create file *YES, *NO Optional
FILETEXT Text ’description’ Character value, *BLANK Optional
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment that is converted. This is a required parameter.
The possible library values are:
*LIBL The library list is used to locate the page segment.
*CURLIB
The current library for the job is used to locate the page segment. If no library is specified as the
current library for the job, QGPL is used.
© Copyright IBM Corp. 1998, 2006 5
library-name
Specify the library where the page segment resides.
Top
Format of data (DTAFMT)
Specifies how data are filled in a physical file member.
The possible values are:
*FIXED
One record has one structured field. The padding character is binary 0s. The record length of the
file using fixed format is the longest length of the AFPDS structured fields in the overlay or the
page segment. If the length of the existing file is smaller than the longest length of the structured
field, an error message is displayed. If the length of the existing file is larger than the longest
length of the structured field, padding characters are added to the end of the records. This format
is for the VM system or the MVS system.
*CONTINUOUS
The structured fields are filled continuously and folded. Only the last record has padding
characters; the padding characters are binary 0s. Any record length of the existing file is allowed.
The created record length of the file is 256 bytes. This format is for the OS/2 system.
This is a required parameter.
Top
File (FILE)
Specifies the qualified name of the physical file being used to fill the page segment data.
The possible values are:
*VM Specifies that the name PSEG38PP is used. It will be a valid filetype for a page segment on the
VM system.
*MVS Specifies that the name S1xxxxxx is used. The ’xxxxxx’ is the first six valid characters of the name
specified in the PAGSEG parameter. It will be a valid member name for a page segment on the
MVS system.
physical-file-name
Type the name of a physical file used to fill the page segment data.
The possible library values are:
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the current
library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
6 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Member (MBR)
Specifies the name of the physical file member which is filled with the page segment data.
The possible values are:
*PAGSEG
Specifies the name of the page segment specified in the PAGSEG parameter.
member-name
Specify the name of a member used to fill the page segment data.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the member and its function.
The possible values are:
*PSGTXT
Specifies the same description specified in the PAGSEG parameter.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the physical file member replaces the existing physical file member if a physical
file member of the same name already exists in the library.
The possible values are:
*NO A new physical file member is not created if an old physical file member of the same name
already exists in the library.
*YES A new physical file member is created and the old physical file member is replaced by it.
Top
Create file (CRTFILE)
Specifies whether or not the file is created if the file does not exist.
The possible values are:
*NO Do not create the file.
*YES Create the file.
Top
Convert Page Segment to PFM (CVTPAGSPFM) 7
Text ’description’ (FILETEXT)
Specifies text that briefly describes the file and its function. This prompt is valid only when CRTFILE
parameter is *YES.
The possible values are:
*BLANK
No text is specified.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
8 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert PCD to Page Segment (CVTPCDPAGS)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert PCD to Page Segment
This command allows you to convert a PC document in a folder to a page segment. The PC document
must contain only one Image Data Stream (IMDS) or one Image Object Content Architecture (IOCA)
function set 10 image data stream.
Error messages for CVTPCDPAGS
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required, Key,
Positional 1 Qualifier 1: Page segment Name, *PRV
Qualifier 2: Library Name, *CURLIB
FRMFLR From folder Character value, *PRV Optional, Key,
Positional 2
FRMDOC From PC document Name, *PRV, *PAGSEG Optional, Key,
Positional 3
CHGIMGSIZE Change image size *SAME, *NO, *YES Optional,
Positional 4
IMGSIZE Image area size Element list Optional,
Positional 5 Element 1: Unit of measure *SAME, *INCH, *CM
Element 2: Width 0.1-57.79, *SAME
Element 3: Length 0.1-57.79, *SAME
MAPPING Mapping option *PAT, *STF, *CAT, *IPTP, *IPTPD, *SAME Optional,
Positional 6
IMGRTT Degree of rotation 0, 90, 180, 270, *SAME Optional,
Positional 7
CHGOFF Change image offset *NO, *YES Optional,
Positional 8
AUT Authority Name, *LIBCRTAUT, *CHANGE, *ALL, *USE, *EXCLUDE,
*SAME
Optional,
Positional 9
TEXT Text ’description’ Character value, *SAME, *BLANK Optional,
Positional 10
REPLACE Replace *NO, *YES Optional,
Positional 11
© Copyright IBM Corp. 1998, 2006 9
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment to be created. This is a required parameter.
The possible values are:
*PRV Specifies that the name of the page segment and library used when you performed this command
last is used. If you specify *PRV for the PAGSEG parameter, it is not necessary to specify a
library.
page-segment-name
Specifies the page segment name to be created.
The possible library values are:
*CURLIB
The current library for the job is used to create the page segment. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library in which the page segment will be created.
Top
From folder (FRMFLR)
Specifies the name of the folder that contains the PC document to be converted.
The possible values are:
*PRV Specifies the name of the folder used when you previously created a page segment of the same
name.
folder-name
Specifies the folder name.
Top
From PC document (FRMDOC)
Specifies the PC document name to be converted.
The possible values are:
*PRV Specifies the name of the PC document used when you previously created a page segment of the
same name.
*PAGSEG
Specifies the name of the page segment to be created is the same as the name of the PC
document.
PC-document-name
Specifies the PC document name that is to be converted.
Top
10 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Change image size (CHGIMGSIZE)
Specifies whether the size of the image in the page segment is changed or not.
The possible values are:
*SAME
Specifies the same value for this parameter used when you previously created a page segment of
the same name.
*NO Specifies not to change the image size.
*YES Specifies to change the image size.
If you specify *YES, the IMGSIZE and MAPOPT parameters will appear, and you can specify the
new image size in the page segment and how to map the input image to the size.
Top
Image area size (IMGSIZE)
Specifies the unit of measurement, width, and length of the image to be created in the page segment
when Change image size parameter is specified as *YES. This prompt is ignored when Change image size
is specified as *NO.
Unit of measure
Specifies the unit of measurement used to specify the following two parameters.
The possible values are:
*SAME
Specifies the unit of measurement used when you previously created a page segment of
the same name.
*INCH
Inch is used as the unit of measurement.
*CM Centimeter is used as the unit of measurement.
Width Specifies the width of the image to be created.
The possible values are:
*SAME
Specifies the value of the width used when you previously created a page segment of the
same name.
width-value
Specify the width value in the selected unit of measurement.
Length
Specifies the length of the image to be created.
The possible values are:
*SAME
Specifies the value of the length used when you previously created a page segment of the
same name.
length-value
Specify the length value in the selected unit of measurement.
Convert PCD to Page Segment (CVTPCDPAGS) 11
Top
Mapping option (MAPPING)
Specifies how the input image is mapped to the specified size of output image in the page segment when
Change image size parameter is specified as *YES. This prompt is ignored when Change image size is
specified as *NO.
The possible values are:
*SAME
Specifies the mapping option used when you previously created a page segment of the same
name.
*PAT (Position and trim)
The top left corner of the input image is located to the top left corner of the output image area.
The image size is not changed, and any portion of the input image that falls outside of the output
image size is trimmed.
*STF (Scale to fit)
The center of the input image is located to the center of the output image area. The image size is
changed so that the input image fits in the output image size.
*CAT (Center and trim)
The center of the input image is located to the center of the output image area. The image size is
not changed, and any portion of the input image that falls outside of the output image size is
trimmed.
*IPTP (Image point to pel)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is mapped to a pel of
the output printer. The image size may vary depending on the pel-density of the output printer,
and any portion of the input image that falls outside of the output image size is trimmed.
*IPTPD (Image point to pel with double dot)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is doubled (replicated)
in both dimensions and mapped to pels of the output printer. The image size may vary
depending on the pel-density of the output printer, and any portion of the input image that falls
outside of the output image size is trimmed.
Top
Degree of rotation (IMGRTT)
Specifies the degree of the clockwise rotation of the output image. The center of the rotation is the top left
corner of the image.
The possible values are:
*SAME
Specifies the degree of rotation used when you previously created a page segment of the same
name.
0 No rotation is done.
90 The image is rotated 90 degrees clockwise.
12 IBM Systems - iSeries: AFP Utilities for iSeries Commands
180 The image is rotated 180 degrees clockwise.
270 The image is rotated 270 degrees clockwise.
Top
Change image offset (CHGOFF)
A rotated IOCA image (page segment) created with no change in offset can be placed at the same point
on a rotated overlay, record layout, or page layout that the corresponding image that is not rotated is
placed on a layout that is not rotated.
If the option is used to change the offset, the upper left corner of the rotated image will be placed at the
specified point on the overlay or layout. This placement is the same as that used for IM1 raster images.
For an image rotated 90 degrees, the upper left corner is the same as the bottom left corner of an image
that is not rotated. For an image rotated 180 degrees, the upper left corner is the same as the bottom right
corner of an image that is not rotated.
The possible values are:
*NO Offset is not changed.
*YES Offset is changed so that the image must be placed on the layout the same as IM1 raster images.
Top
Authority (AUT)
Specifies the authority given to the user who does not have specific authority, who is not on the
authorization list, or whose user group has no specific authority to the created page segment. This value
is ignored and the current authority remains if a page segment already exists and this is replacing it.
The possible values are:
*SAME
Specifies the authority used when you previously created a page segment of the same name.
*LIBCRTAUT
The system determines the authority for the page segment by using the value specified for the
Create authority prompt (CRTAUT parameter) on the Create Library command (CRTLIB) for the
library containing the page segment to be created. If the value specified on the Create authority
prompt (CRTAUT parameter) is changed, the new value will not affect this page segment.
*CHANGE
Change authority allows the user to perform all operations on the page segment except those
limited to the owner or controlled by object existence authority and object management authority.
The user can change the page segment and perform basic functions on the page segment. Change
authority provides object operational authority and all data authority.
*ALL All authority allows the user to perform all operations on the page segment except those limited
to the owner or controlled by authorization list management authority. The user can control the
page segment’s existence, specify the security for the page segment, change the page segment,
and perform basic functions on the page segment. The user cannot transfer ownership of the
page segment.
*USE Use authority allows the user to perform basic operations on the page segment, such as read the
page segment. The user is prevented from changing the page segment. Use authority provides
object operational authority and read authority.
Convert PCD to Page Segment (CVTPCDPAGS) 13
*EXCLUDE
Exclude authority prevents the user from accessing the page segment.
authorization-list-name
Specify the name of an authorization list. Users included on the authorization list are granted
authority to the page segment as specified by the list. The authorization list must exist when the
page segment is created.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the page segment to be created.
The possible values are:
*SAME
Specifies the text used when you previously created a page segment of the same name.
*BLANK
Specifies the text is blank.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the page segment replaces the existing page segment if a page segment of the
same name already exists in the library.
The possible values are:
*YES A new page segment is created and the old page segment is replaced by it.
*NO A new page segment is not created if an old page segment of the same name already exists in the
library.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
14 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Convert PFM to Page Segment (CVTPFMPAGS)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
Convert PFM to Page Segment
This command allows you to convert a member in a physical database file to a page segment. The
member must contain only one Image Data Stream (IMDS) or one Image Object Content Architecture
(IOCA) function set 10 image data stream.
Error messages for CVTPFMPAGS
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
PAGSEG Page segment Qualified object name Required, Key,
Positional 1 Qualifier 1: Page segment Name, *PRV
Qualifier 2: Library Name, *CURLIB
FILE From file Single values: *PRV
Other values: Qualified object name
Optional, Key,
Positional 2
Qualifier 1: From file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR From member Name, *PRV, *PAGSEG Optional, Key,
Positional 3
CHGIMGSIZE Change image size *SAME, *NO, *YES Optional,
Positional 4
IMGSIZE Image area size Element list Optional,
Positional 5 Element 1: Unit of measure *SAME, *INCH, *CM
Element 2: Width 0.1-57.79, *SAME
Element 3: Length 0.1-57.79, *SAME
MAPPING Mapping option *PAT, *STF, *CAT, *IPTP, *IPTPD, *SAME Optional,
Positional 6
IMGRTT Degree of rotation 0, 90, 180, 270, *SAME Optional,
Positional 7
CHGOFF Change image offset *NO, *YES Optional,
Positional 8
AUT Authority Name, *LIBCRTAUT, *CHANGE, *ALL, *USE, *EXCLUDE,
*SAME
Optional,
Positional 9
TEXT Text ’description’ Character value, *SAME, *BLANK Optional,
Positional 10
© Copyright IBM Corp. 1998, 2006 15
Keyword Description Choices Notes
REPLACE Replace *NO, *YES Optional,
Positional 11
Top
Page segment (PAGSEG)
Specifies the qualified name of the page segment to be created. This is a required parameter.
The possible values are:
*PRV Specifies that the name of the page segment and library used when you performed this command
last is used. If you specify *PRV for the PAGSEG parameter, it is not necessary to specify a
library.
page-segment-name
Specifies the page segment name to be created.
The possible library values are:
*CURLIB
The current library for the job is used to create the page segment. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library in which the page segment will be created.
Top
From file (FILE)
Specifies the qualified name of the physical file that contains the member to be converted.
The possible values are:
*PRV Specifies the file and library used when you previously created a page segment of the same
name.
file-name
Type the name of an existing physical database file to be used. If you do not specify a library
name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
16 IBM Systems - iSeries: AFP Utilities for iSeries Commands
From member (MBR)
Specifies the name of the physical file member to be converted.
The possible values are:
*PRV Specifies the member name used when you previously created a page segment of the same name.
*PAGSEG
Specifies the name of the page segment to be created is the same as the name of the member.
member-name
Specifies the member name that is to be converted.
Top
Change image size (CHGIMGSIZE)
Specifies whether the size of the image in the page segment is changed or not.
The possible values are:
*SAME
Specifies the same value for this parameter used when you previously created a page segment of
the same name.
*NO Specifies not to change the image size.
*YES Specifies to change the image size.
If you specify *YES, the IMGSIZE and MAPOPT parameters will appear, and you can specify the
new image size in the page segment and how to map the input image to the size.
Top
Image area size (IMGSIZE)
Specifies the unit of measurement, width, and length of the image to be created in the page segment
when Change image size parameter is specified as *YES. This prompt is ignored when Change image size
is specified as *NO.
Unit of measure
Specifies the unit of measurement used to specify the following two parameters.
The possible values are:
*SAME
Specifies the unit of measurement used when you previously created a page segment of
the same name.
*INCH
Inch is used as the unit of measurement.
*CM Centimeter is used as the unit of measurement.
Width Specifies the width of the image to be created.
The possible values are:
Convert PFM to Page Segment (CVTPFMPAGS) 17
*SAME
Specifies the value of the width used when you previously created a page segment of the
same name.
width-value
Specify the width value in the selected unit of measurement.
Length
Specifies the length of the image to be created.
The possible values are:
*SAME
Specifies the value of the length used when you previously created a page segment of the
same name.
length-value
Specify the length value in the selected unit of measurement.
Top
Mapping option (MAPPING)
Specifies how the input image is mapped to the specified size of output image in the page segment when
Change image size parameter is specified as *YES. This prompt is ignored when Change image size is
specified as *NO.
The possible values are:
*SAME
Specifies the mapping option used when you previously created a page segment of the same
name.
*PAT (Position and trim)
The top left corner of the input image is located to the top left corner of the output image area.
The image size is not changed, and any portion of the input image that falls outside of the output
image size is trimmed.
*STF (Scale to fit)
The center of the input image is located to the center of the output image area. The image size is
changed so that the input image fits in the output image size.
*CAT (Center and trim)
The center of the input image is located to the center of the output image area. The image size is
not changed, and any portion of the input image that falls outside of the output image size is
trimmed.
*IPTP (Image point to pel)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is mapped to a pel of
the output printer. The image size may vary depending on the pel-density of the output printer,
and any portion of the input image that falls outside of the output image size is trimmed.
*IPTPD (Image point to pel with double dot)
The top left corner of the input image is located to the top left corner of the output image area.
No resolution correction is done and each image point in the input image is doubled (replicated)
18 IBM Systems - iSeries: AFP Utilities for iSeries Commands
in both dimensions and mapped to pels of the output printer. The image size may vary
depending on the pel-density of the output printer, and any portion of the input image that falls
outside of the output image size is trimmed.
Top
Degree of rotation (IMGRTT)
Specifies the degree of the clockwise rotation of the output image. The center of the rotation is the top left
corner of the image.
The possible values are:
*SAME
Specifies the degree of rotation used when you previously created a page segment of the same
name.
0 No rotation is done.
90 The image is rotated 90 degrees clockwise.
180 The image is rotated 180 degrees clockwise.
270 The image is rotated 270 degrees clockwise.
Top
Change image offset (CHGOFF)
A rotated IOCA image (page segment) created with no change in offset can be placed at the same point
on a rotated overlay, record layout, or page layout that the corresponding image that is not rotated is
placed on a layout that is not rotated.
If the option is used to change the offset, the upper left corner of the rotated image will be placed at the
specified point on the overlay or layout. This placement is the same as that used for IM1 raster images.
For an image rotated 90 degrees, the upper left corner is the same as the bottom left corner of an image
that is not rotated. For an image rotated 180 degrees, the upper left corner is the same as the bottom right
corner of an image that is not rotated.
The possible values are:
*NO Offset is not changed.
*YES Offset is changed so that the image must be placed on the layout the same as IM1 raster images.
Top
Authority (AUT)
Specifies the authority given to the user who does not have specific authority, who is not on the
authorization list, or whose user group has no specific authority to the created page segment. This value
is ignored and the current authority remains if a page segment already exists and this is replacing it.
The possible values are:
*SAME
Specifies the authority used when you previously created a page segment of the same name.
Convert PFM to Page Segment (CVTPFMPAGS) 19
*LIBCRTAUT
The system determines the authority for the page segment by using the value specified for the
Create authority prompt (CRTAUT parameter) on the Create Library command (CRTLIB) for the
library containing the page segment to be created. If the value specified on the Create authority
prompt (CRTAUT parameter) is changed, the new value will not affect this page segment.
*CHANGE
Change authority allows the user to perform all operations on the page segment except those
limited to the owner or controlled by object existence authority and object management authority.
The user can change the page segment and perform basic functions on the page segment. Change
authority provides object operational authority and all data authority.
*ALL All authority allows the user to perform all operations on the page segment except those limited
to the owner or controlled by authorization list management authority. The user can control the
page segment’s existence, specify the security for the page segment, change the page segment,
and perform basic functions on the page segment. The user cannot transfer ownership of the
page segment.
*USE Use authority allows the user to perform basic operations on the page segment, such as read the
page segment. The user is prevented from changing the page segment. Use authority provides
object operational authority and read authority.
*EXCLUDE
Exclude authority prevents the user from accessing the page segment.
authorization-list-name
Specify the name of an authorization list. Users included on the authorization list are granted
authority to the page segment as specified by the list. The authorization list must exist when the
page segment is created.
Top
Text ’description’ (TEXT)
Specifies text that briefly describes the page segment to be created.
The possible values are:
*SAME
Specifies the text used when you previously created a page segment of the same name.
*BLANK
Specifies the text is blank.
’description’
Specifies no more than 50 characters of text, enclosed in apostrophes.
Top
Replace (REPLACE)
Specifies whether or not the page segment replaces the existing page segment if a page segment of the
same name already exists in the library.
The possible values are:
*YES A new page segment is created and the old page segment is replaced by it.
*NO A new page segment is not created if an old page segment of the same name already exists in the
library.
20 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
Convert PFM to Page Segment (CVTPFMPAGS) 21
22 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Print PFD Data (PRTPFDDTA)
Where allowed to run: All environments (*ALL)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to print a database file member according to the design of a PFD definition.
Error messages for PRTPFDDTA
*ESCAPE Messages
AFP0010
An error occurred.
AFP0040
Database file &2 in library &1 cannot be allocated.
AFP22A0
Print request canceled.
Top
Parameters
Keyword Description Choices Notes
PFDFILE PFD file Qualified object name Required,
Positional 1 Qualifier 1: PFD file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
PFDMBR PFD definition Name, *FIRST Optional,
Positional 2
FILE Database file Single values: *PFD
Other values: Qualified object name
Optional,
Positional 3
Qualifier 1: Database file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR Member Name, *FIRST Optional,
Positional 4
GRID Include grid *YES, *NO, *YES, *NO Optional,
Positional 5
RCDSLT Record selection *YES, *NO, *YES, *NO Optional,
Positional 6
ENDPAGE Ending page 1-9999, *END Optional,
Positional 7
DRAWER Source drawer 1-255, *PFD, *E1, *CUT Optional,
Positional 8
OUTBIN Output bin 1-65535, *DEVD Optional,
Positional 9
COPIES Copies 1-255, *PFD Optional,
Positional 10
© Copyright IBM Corp. 1998, 2006 23
Keyword Description Choices Notes
OUTQ Output queue Single values: *JOB
Other values: Qualified object name
Optional,
Positional 11
Qualifier 1: Output queue Name
Qualifier 2: Library Name, *LIBL, *CURLIB
FORMDF Form definition Qualified object name Optional,
Positional 12 Qualifier 1: Form definition Name, *PFD, *DEVD, *INLINE
Qualifier 2: Library Name, *LIBL, *CURLIB
Top
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD definition to be used.
The possible values are:
PFD-definition-file-name
Type the name of an existing PFD definition file to be used. If you specify the
PFD-definition-file-name and a library name, print format utility searches the specified library for
the PFD definition file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
PFD definition (PFDMBR)
Specifies the name of the PFD definition to be used to print a database file member.
The possible values are:
*FIRST
This is the default value. The first PFD definition in the PFD definition file is used.
PFD-definition-name
Type the name of the PFD-definition you want to use.
Top
Database file (FILE)
Specifies the database file and library that contain the member to be printed.
The possible values are:
24 IBM Systems - iSeries: AFP Utilities for iSeries Commands
*PFD Specifies that the database file and library that are specified in the PFD definition are used to
print the member.
file-name
Type the name of an existing database file to be used. If you specify the file-name and a library
name, print format utility searches the specified library for the database file. If you do not specify
a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
Member (MBR)
Specifies the name of the member to be printed.
The possible values are:
*FIRST
This is the default value. The first member in the database file is printed.
member-name
Type the name of the member you want to print.
Top
Include grid (GRID)
Specifies whether a grid is included in the printout or not. A Grid consists of horizontal lines and vertical
lines, and the distance between horizontal lines and that between vertical lines are specified in the PFD
specifications.
The possible values are:
*NO This is the default value. A grid is not included in the printout.
*YES A grid is included in the printout.
Top
Record selection (RCDSLT)
Specifies whether the records are selected according to the selection conditions specified in the PFD
definition or not.
The possible values are:
*YES Type *YES if you want to select and print only those records that match the selection conditions
specified in the PFD definition.
Print PFD Data (PRTPFDDTA) 25
All records are printed if no conditions are specified in the PFD definition.
*NO Type *NO if you want to print all records regardless of the selection conditions specified in the
PFD definition.
Top
Ending page (ENDPAGE)
Specifies whether printing should stop at a certain page or continue until all records are processed.
The possible values are:
*END Specifies to print until all records are processed.
page-number
Specifies the last page number to be printed. Print format utility stops printing when the last
page specified by this parameter is printed. If all records have been processed before the last page
is printed, print format utility will stop printing.
The possible value range is 1 - 9999.
Top
Drawer (DRAWER)
Specifies the source drawer used when single-cut sheets are fed into the printer.
The possible values are:
*PFD The value specified in the Printout specifications is used. *PFD is the default.
*E1 Envelopes are fed from the envelope drawer on the sheet-feed paper handler.
*CUT For printers with manual feed, cut sheets are fed manually through the manual feeder.
source-drawer
Specify the drawer from which the paper is fed. Valid values range from 1 through 255. For
printers with manual feed, specifying 100 is the same as specifying *CUT.
Top
Output bin (OUTBIN)
Specifies the destination of the output on printers capable of multiple output bins.
The possible values are:
*DEVD
The value specified in the Device description is used. *DEVD is the default.
output-bin
Specify the output bin for the destination of the output. Valid values range from 1 through 65535.
Top
26 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Copies (COPIES)
Specifies the number of copies to be printed.
The possible values are:
*PFD Specifies that the number specified in the PFD definition is used.
This is the default value.
number-of-copies
Specifies the number of copies to be printed.
The possible value range is 1 - 255.
Top
Output queue (OUTQ)
Specifies the qualified name of the output queue in which the spooled file will be created.
The possible values are:
*JOB Specifies the output queue specified in the job description associated with this job is used.
This is the default value.
output-queue-name
Specifies the name of the output queue to be used.
The possible library values are:
*LIBL The library list is used to locate the output queue.
*CURLIB
The current library for the job is used to locate the output queue. If no library is specified
as the current library for the job, QGPL is used.
library-name
Specify the library where the output queue resides.
Top
Form definition (FORMDF)
Specifies the qualified name of the form definition to use when printing the spooled file.
The possible values are:
*PFD Specifies that the form definition and library that are specified in the PFD definition will be used
to print the member.
*DEVD
Specifies that the form definition specified in the device description for the printer will be used.
*INLINE
Specifies that the print format utility will create an inline form definition with the name F1AFPU
and use that form definition when printing the data. The page width and length specified in the
printout format definition will be placed in the created form definition for page control with
Print PFD Data (PRTPFDDTA) 27
continuous form printers. These values will be used when the page size control value for the
printer is set to *YES. Use the Work with PSF Configurations (WRKPSFCFG) command to set the
page size control value.
form-definition-name
Specifies the name of the form definition to be used.
The possible library values are:
*LIBL The library list is used to locate the form definition.
*CURLIB
The current library for the job is used to locate the form definition. If no library is
specified as the current library for the job, QGPL is used.
library-name
Specify the library where the form definition resides.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP0040
Database file &2 in library &1 cannot be allocated.
AFP22A0
Print request canceled.
Top
28 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start AFP Utilities (STRAFPU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
The command displays the main AFP Utilities menu that allows you to use the AFP Utilities functions.
There are no parameters for this command.
Error messages for STRAFPU
*ESCAPE Messages
AFP0010
An error occurred.
AFP10C0
Error occurred while AFPU main menu was displayed.
AFP22A0
Print request canceled.
AFP3303
Page segment &5 was not created in library &1.
Top
Parameters
None
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP10C0
Error occurred while AFPU main menu was displayed.
AFP22A0
Print request canceled.
AFP3303
Page segment &5 was not created in library &1.
© Copyright IBM Corp. 1998, 2006 29
Top
30 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start Overlay Utility (STROVLU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to perform an option of the overlay utility directly without viewing the Work
with Source Overlays display.
Error messages for STROVLU
*ESCAPE Messages
AFP0010
An error occurred.
Top
Parameters
Keyword Description Choices Notes
FILE Source overlay file Single values: *PRV
Other values: Qualified object name
Optional,
Positional 1
Qualifier 1: Source overlay
file
Name
Qualifier 2: Library Name, *LIBL, *CURLIB
MBR Source overlay Name, *PRV, *SELECT Optional,
Positional 2
OPTION Option *BLANK, ’ ’, 1, 2, 3, 4, 6, 7, 9 Optional,
Positional 3
Top
Source overlay file (FILE)
Specifies the source overlay file and library that contain the source overlay to be worked with.
The possible values are:
*PRV Specifies that the overlay utility is to use the name of the source overlay file and library used in
your last overlay utility session. If you specify *PRV for the FILE parameter, it is not necessary to
specify a library.
source-overlay-file-name
Type the name of an existing source overlay file to be used. If you specify the
source-overlay-file-name and a library name, overlay utility searches the specified library for the
source overlay file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
© Copyright IBM Corp. 1998, 2006 31
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
Source overlay (MBR)
Specifies the name of the source overlay to be worked with or created. The default value for this
parameter depends on if you specify the FILE parameter.
The possible values are:
*SELECT
This is the default value if you specify the FILE parameter. If you choose *SELECT, you will get
the lists of all source overlays in the specified source overlay file and library. Select one or more
source overlays to work with on the display.
*PRV This is the default value if you do not specify the FILE parameter. *PRV is the name of the
previous source overlay that was used.
source-overlay-name
Type the name of the source overlay you want to work with.
Top
Option (OPTION)
Specifies the function to perform on the selected source overlay.
The possible values are:
*BLANK or ’ ’
This is the default value if you do not specify a source overlay name. *BLANK specifies no
action.
1=Create
Type 1 to create a source overlay.
2=Change
This is the default value if you specify a source overlay name.
Type 2 to change a source overlay.
3=Copy
Type 3 to copy a source overlay.
4=Delete
Type 4 to delete a source overlay.
6=Print
Type 6 to print a source overlay.
7=Rename
Type 7 to rename a source overlay.
32 IBM Systems - iSeries: AFP Utilities for iSeries Commands
9=Create overlay
Type 9 to create an overlay from a source overlay.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
Top
Start Overlay Utility (STROVLU) 33
34 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Start Print Format Utility (STRPFU)
Where allowed to run: Interactive environments (*INTERACT
*IPGM *IREXX *EXEC)
Threadsafe: No
Parameters
Examples
Error messages
This command allows you to perform an option of print format utility directly without viewing the Work
with PFD Definitions display.
Error messages for STRPFU
*ESCAPE Messages
AFP0010
An error occurred.
AFP22A0
Print request canceled.
Top
Parameters
Keyword Description Choices Notes
PFDFILE PFD file Single values: *PRV
Other values: Qualified object name
Optional,
Positional 1
Qualifier 1: PFD file Name
Qualifier 2: Library Name, *LIBL, *CURLIB
PFDMBR PFD definition Name, *PRV, *SELECT Optional,
Positional 2
OPTION Option *BLANK, ’ ’, 1, 2, 3, 4, 6, 7, 9 Optional,
Positional 3
Top
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD definition to be worked with.
The possible values are:
*PRV Specifies that the print format utility is to use the name of the PFD definition file and library
used in your last print format utility session. If you specify *PRV for the PFDFILE parameter, it is
not necessary to specify a library.
PFD-definition-file-name
Type the name of an existing PFD definition file to be used. If you specify the
PFD-definition-file-name and a library name, print format utility searches the specified library for
the PFD definition file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL The library list is used to locate the file.
© Copyright IBM Corp. 1998, 2006 35
*CURLIB
The current library for the job is used to locate the file. If no library is specified as the
current library for the job, QGPL is used.
library-name
Specify the library where the file resides.
Top
PFD definition (PFDMBR)
Specifies the name of the PFD definition to be worked with or created. The default value for this
parameter depends on if you specify the PFDFILE parameter.
The possible values are:
*SELECT
This is the default value if you specify the PFDFILE parameter. If you choose *SELECT, you will
get the lists of all PFD definitions in the specified PFD definition file and library. Select one or
more PFD definitions to work with on the display.
*PRV This is the default value if you do not specify the PFDFILE parameter. *PRV is the name of the
previous PFD definition that was used.
PFD-definition-name
Type the name of the PFD-definition you want to work with.
Top
Option (OPTION)
Specifies the function to perform on the selected PFD definition. The default value depends on if you
specify a PFD definition name.
The possible values are:
*BLANK or ’ ’
This is the default value if you do not specify a PFD definition name. *BLANK specifies no
action.
1=Create
Type 1 to create a PFD definition.
2=Change
This is the default value if you specify a PFD definition name.
Type 2 to change a PFD definition.
3=Copy
Type 3 to copy a PFD definition.
4=Delete
Type 4 to delete a PFD definition.
6=Print
Type 6 to print a PFD definition.
7=Rename
Type 7 to rename a PFD definition.
36 IBM Systems - iSeries: AFP Utilities for iSeries Commands
9=Print database file
Type 9 to print a database file member by using a PFD definition.
Top
Examples
None
Top
Error messages
*ESCAPE Messages
AFP0010
An error occurred.
AFP22A0
Print request canceled.
Top
Start Print Format Utility (STRPFU) 37
38 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Appendix. Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries.
Consult your local IBM representative for information on the products and services currently available in
your area. Any reference to an IBM product, program, or service is not intended to state or imply that
only that IBM product, program, or service may be used. Any functionally equivalent product, program,
or service that does not infringe any IBM intellectual property right may be used instead. However, it is
the user’s responsibility to evaluate and verify the operation of any non-IBM product, program, or
service.
IBM may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
500 Columbus Avenue
Thornwood, NY8809
U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property
Department in your country or send inquiries, in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any other country where such
provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of
the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the
exchange of information between independently created programs and other programs (including this
one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Corporation
© Copyright IBM Corp. 1998, 2006 39
Software Interoperability Coordinator, Department 49XA
3605 Highway 52 N
Rochester, MN 55901
U.S.A.
Such information may be available, subject to appropriate terms and conditions, including in some cases,
payment of a fee.
The licensed program described in this information and all licensed material available for it are provided
by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement, or
any equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of those products, their
published announcements or other publicly available sources. IBM has not tested those products and
cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM
products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of
those products.
This information contains examples of data and reports used in daily business operations. To illustrate
them as completely as possible, the examples include the names of individuals, companies, brands, and
products. All of these names are fictitious and any similarity to the names and addresses used by an
actual business enterprise is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrate programming
techniques on various operating platforms. You may copy, modify, and distribute these sample programs
in any form without payment to IBM, for the purposes of developing, using, marketing or distributing
application programs conforming to the application programming interface for the operating platform for
which the sample programs are written. These examples have not been thoroughly tested under all
conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these
programs. You may copy, modify, and distribute these sample programs in any form without payment to
IBM for the purposes of developing, using, marketing, or distributing application programs conforming
to IBM’s application programming interfaces.
Each copy or any portion of these sample programs or any derivative work, must include a copyright
notice as follows:
(C) IBM 2006. Portions of this code are derived from IBM Corp. Sample Programs. (C) Copyright IBM
Corp. 1998, 2006. All rights reserved.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
The following terms are trademarks of International Business Machines Corporation in the United States,
other countries, or both:
Advanced Function Printing
AFP
AS/400
CICS
COBOL/400
C/400
DataPropagator
DB2
40 IBM Systems - iSeries: AFP Utilities for iSeries Commands
IBM
Infoprint
InfoWindow
iSeries
LPDA
OfficeVision
i5/OS
Print Services Facility
RPG/400
SystemView
System/36
TCS
WebSphere
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the
United States, other countries, or both.
Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other
countries, or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
Terms and conditions
Permissions for the use of these publications is granted subject to the following terms and conditions.
Personal Use: You may reproduce these publications for your personal, noncommercial use provided that
all proprietary notices are preserved. You may not distribute, display or make derivative works of these
publications, or any portion thereof, without the express consent of IBM.
Commercial Use: You may reproduce, distribute and display these publications solely within your
enterprise provided that all proprietary notices are preserved. You may not make derivative works of
these publications, or reproduce, distribute or display these publications or any portion thereof outside
your enterprise, without the express consent of IBM.
Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either
express or implied, to the publications or any information, data, software or other intellectual property
contained therein.
IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of
the publications is detrimental to its interest or, as determined by IBM, the above instructions are not
being properly followed.
You may not download, export or re-export this information except in full compliance with all applicable
laws and regulations, including all United States export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE
PUBLICATIONS ARE PROVIDED ″AS-IS″ AND WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Appendix. Notices 41
42 IBM Systems - iSeries: AFP Utilities for iSeries Commands
Printed in USA
AF1.html 2018-11-27 18:31 45K
![[TXT]](http://audentia-gestion.fr/__ovh_icons/text.gif)
BR1.pdf.html 2018-11-27 18:31 45K
CM1.pdf.html 2018-11-27 18:31 45K
CR1.pdf.html 2018-11-27 18:31 45K
DB2AdminGettingStart..> 2018-11-27 18:31 45K
DB2Connect-db2c0f971..> 2018-11-27 18:31 45K
DB2Connect-db2c0f101..> 2018-11-27 18:31 45K
DFH.pdf.html 2018-11-27 18:31 45K
DG1.pdf.html 2018-11-27 18:31 45K
DP4.pdf.html 2018-11-27 18:31 45K
DS1.pdf.html 2018-11-27 18:31 45K
IP1.pdf.html 2018-11-27 18:31 45K
JS1.pdf.html 2018-11-27 18:31 45K
JV1.pdf.html 2018-11-27 18:31 45K
MG1.pdf.html 2018-11-27 18:31 45K
PT1.pdf.html 2018-11-27 18:31 45K
QU1.pdf.html 2018-11-27 18:31 45K
RD1.pdf.html 2018-11-27 18:31 45K
SM1.pdf.html 2018-11-27 18:31 45K
SS1-1.pdf.html 2018-11-27 18:31 45K
SS1-2.pdf.html 2018-11-27 18:31 45K
SS1-3.pdf.html 2018-11-27 18:31 45K
SS1-4.pdf.html 2018-11-27 18:31 45K
SS1-5.pdf.html 2018-11-27 18:31 45K
SS1-6.pdf.html 2018-11-27 18:31 45K
SS1-7.pdf.html 2018-11-27 18:31 45K
SS1-8.pdf.html 2018-11-27 18:31 45K
SS1-9.pdf.html 2018-11-27 18:31 45K
SS1-10.pdf.html 2018-11-27 18:31 45K
SS1-11.pdf.html 2018-11-27 18:31 45K
SS1-12.pdf.html 2018-11-27 18:31 45K
SS1-13.pdf.html 2018-11-27 18:31 45K
SS1-14.pdf.html 2018-11-27 18:31 32K
SS1-15.pdf.html 2018-11-27 18:31 32K
SS1-16.pdf.html 2018-11-27 18:31 32K
ST1.pdf.html 2018-11-27 18:31 45K
TC1.pdf.html 2018-11-27 18:31 45K
WDS.pdf.html 2018-11-27 18:31 45K
XH2.pdf.html 2018-11-27 18:31 45K
adjuster.pdf.html 2018-11-27 18:31 45K
admin.pdf.html 2018-11-27 18:31 45K
administration_22apr..> 2018-11-27 18:31 45K
aixcmds1_pdf.pdf.html 2018-11-27 18:31 45K
aixcmds2_pdf.pdf.html 2018-11-27 18:31 45K
aixcmds3_pdf.pdf.html 2018-11-27 18:31 69K
aixcmds4_pdf.pdf.html 2018-11-27 18:23 69K
aixcmds5_pdf.pdf.html 2018-11-27 18:23 69K
aixcmds6_pdf.pdf.html 2018-11-27 18:23 69K
aixfiles_pdf.pdf.html 2018-11-27 18:23 69K
aixnutanix_pdf.pdf.html 2018-11-27 18:23 69K
api.pdf.html 2018-11-27 18:23 69K
backup.pdf.html 2018-11-27 18:23 69K
baseadmndita_pdf.html 2018-11-27 18:23 69K
baseadmndita_pdf.pdf..> 2018-11-27 18:23 69K
basetrf1_pdf (1).pdf..> 2018-11-27 18:23 69K
basetrf1_pdf.pdf.html 2018-11-27 18:23 69K
basetrf2_pdf.pdf.html 2018-11-27 18:23 69K
clust.pdf.html 2018-11-27 18:23 69K
clusteraware_pdf.pdf..> 2018-11-27 18:23 69K
cms.pdf.html 2018-11-27 18:23 69K
comm.pdf.html 2018-11-27 18:23 69K
commadmndita_pdf.pdf..> 2018-11-27 18:23 69K
config.pdf.html 2018-11-27 18:23 69K
config_guide_28jun0...> 2018-11-27 18:23 69K
consolidation.pdf.html 2018-11-27 18:23 69K
crypt.pdf.html 2018-11-27 18:23 69K
data.pdf.html 2018-11-27 18:23 69K
db2aaf81.pdf.html 2018-11-27 18:23 69K
debug.pdf.html 2018-11-27 18:23 69K
dirserv1.pdf.html 2018-11-27 18:23 69K
dix252f.pdf.html 2018-11-27 18:23 69K
ds_ig.pdf.html 2018-11-27 18:23 69K
dsm.pdf.html 2018-11-27 18:23 69K
edit.pdf.html 2018-11-27 18:23 69K
g5445774.pdf.html 2018-11-27 18:23 69K
g5445775.pdf.html 2018-11-27 18:23 69K
g5445846.pdf.html 2018-11-27 18:23 69K
g5445853.pdf.html 2018-11-27 18:23 69K
g5
oa.pdf.html 2018-11-27 18:23 69K
obj.pdf.html 2018-11-27 18:23 69K
off.pdf.html 2018-11-27 18:23 69K
openglrf.pdf.html 2018-11-27 18:23 69K
optimize_pdf.pdf.html 2018-11-27 18:23 69K
oraclemigtk.pdf.html 2018-11-27 18:23 69K
pase.pdf.html 2018-11-27 18:23 69K
perfmg.pdf.html 2018-11-27 18:23 69K
pgm.pdf.html 2018-11-27 18:23 69K
pm.pdf.html 2018-11-27 18:23 69K
pol.pdf.html 2018-11-27 18:23 69K
prftools_pdf.pdf.html 2018-11-27 18:23 69K
prftungd_pdf.pdf.html 2018-11-27 18:23 69K
print.pdf.html 2018-11-27 18:23 69K
printrgd_pdf.pdf.html 2018-11-27 18:23 69K
program.pdf.html 2018-11-27 18:23 69K
pwincfg.pdf.html 2018-11-27 18:23 69K
rbae5.pdf.html 2018-11-27 18:23 69K
rbafo.pdf.html 2018-11-27 18:23 69K
rbafpmst.pdf.html 2018-11-27 18:23 69K
rbafy.pdf.html 2018-11-27 18:23 69K
rbafzmst.pdf.html 2018-11-27 18:23 69K
rbagsmst.pdf.html 2018-11-27 18:23 69K
rbal1.pdf.html 2018-11-27 18:23 69K
rbal3.pdf.html 2018-11-27 18:23 69K
rbam6.pdf.html 2018-11-27 18:23 69K
rdma_pdf.pdf.html 2018-11-27 18:23 69K
reg.pdf.html 2018-11-27 18:23 69K
rnbase619_pdf.pdf.html 2018-11-27 18:23 69K
rnbase715_pdf.pdf.html 2018-11-27 18:23 69K
rnbase722_pdf.pdf.html 2018-11-27 18:23 69K
rnbase723_pdf.pdf.html 2018-11-27 18:23 69K
rnexp723_pdf.pdf.html 2018-11-27 18:23 69K
rpc1.pdf.html 2018-11-27 18:23 69K
rzaax.pdf.html 2018-11-27 18:23 69K
rzab6.pdf.html 2018-11-27 18:23 69K
rzadp.pdf.html 2018-11-27 18:23 69K
rzaef.pdf.html 2018-11-27 18:23 69K
rzaf3.pdf.html 2018-11-27 18:23 69K
rzah4mst.pdf.html 2018-11-27 18:23 69K
rzaha.pdf.html 2018-11-27 18:23 69K
rzaku.pdf.html 2018-11-27 18:23 69K
rzakx.pdf.html 2018-11-27 18:23 69K
rzakz.pdf.html 2018-11-27 18:23 69K
rzal2.pdf.html 2018-11-27 18:23 69K
rzal4.pdf.html 2018-11-27 18:23 69K
rzal5.pdf.html 2018-11-27 18:23 69K
rzal6.pdf.html 2018-11-27 18:23 69K
rzal7.pdf.html 2018-11-27 18:23 69K
rzala.pdf.html 2018-11-27 18:23 69K
rzalc.pdf.html 2018-11-27 18:23 69K
rzalf.pdf.html 2018-11-27 18:23 64K
rzalm.pdf.html 2018-11-27 18:23 69K
rzalu.pdf.html 2018-11-27 18:23 69K
rzalv.pdf.html 2018-11-27 18:23 69K
rzalw.pdf.html 2018-11-27 18:23 64K
rzaly.pdf.html 2018-11-27 18:23 69K
rzaly002.pdf.html 2018-11-27 18:23 69K
rzalzmst.pdf.html 2018-11-27 18:23 69K
rzam4.pdf.html 2018-11-27 18:23 69K
rzam5.pdf.html 2018-11-27 18:23 69K
rzam8.pdf.html 2018-11-27 18:23 69K
rzam9.pdf.html 2018-11-27 18:23 69K
rzamc.pdf.html 2018-11-27 18:23 64K
rzamd.pdf.html 2018-11-27 18:23 69K
rzamh.pdf.html 2018-11-27 18:23 69K
rzamj.pdf.html 2018-11-27 18:23 69K
rzamm.pdf.html 2018-11-27 18:23 69K
rzamp.pdf.html 2018-11-27 18:23 69K
rzamq.pdf.html 2018-11-27 18:23 69K
rzamu.pdf.html 2018-11-27 18:23 69K
rzamv.pdf.html 2018-11-27 18:23 64K
rzamz.pdf.html 2018-11-27 18:23 69K
rzaq9.pdf.html 2018-11-27 18:23 69K
rzasfbook.pdf.html 2018-11-27 18:23 32K
rzata.pdf.html 2018-11-27 18:23 69K
rzatb.pdf.html 2018-11-27 18:23 69K
rzatc.pdf.html 2018-11-27 18:23 69K
rzate.pdf.html 2018-11-27 18:23 69K
rzatg.pdf.html 2018-11-27 18:37 45K
rzati.pdf.html 2018-11-27 18:37 45K
rzatj.pdf.html 2018-11-27 18:37 45K
