Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0001 IPSEC "(&00)" ACTIVE
Meaning
The IPSEC subsystem was successfully initialized.
IPSEC version (&00) is active.
YIS0002
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0002 IPSEC SUBSYSTEM TERMINATED
Meaning
IPSEC subsystem has been terminated.
YIS0004
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0004 IPSEC NOT STARTED. REASON: (&00)
Meaning
IPSEC subsystem has not been started.
Reason:
(&00) = 01 wrong BCAM version
= 02 wrong BS2000/OSD version
= 03 ISECWAIT bourse not created
= 04 ISEC task not created
= 05 $ENER error
= 06 ISEC task priviledge not set
= 07 ISECCOMM bourse not created
= 08 ISEC task level not set
= 09 ISECTIME timer not started
= 0A IPSec slotpool not created
= 0B $TSOS.SYSSSI.IPSEC.nnn not readable
= 0C LOAD-IPSEC-DB detected errors
= 0E openCRYPT not initialized
= 0F ISECSIBO not created
= 15 KLIPS tracing not initialized
= 17 ASTI call returns error
= 19 PFKEY not initialized
= 1A SPMD not initialized
= 1B BCAM is not active
Response
corresponding to the reason:
(&00) = 01,02 use correct BCAM, BS2000/OSD version
= 0B correct $TSOS.SYSSSI.IPSEC.nnn
= 0C correct contents of IPSEC configuration file
= 0E start subsystem CRYPT
= 1A correct contents of IPSEC configuration file
= 1B Enter /START-SUBSYSTEM IPSEC as soon as BCAM is active
YIS010A
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS010A "(&00)" task started
Meaning
The task (&00) has been started.
YIS010E
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS010E "(&00)" task terminated
Meaning
The task (&00) terminates.
YIS0200
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0200 system error occured
YIS0201
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0201 internal system error occured
YIS0202
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0202 user not privileged to execute the command
YIS0210
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0210 LOAD-IPSEC-DB command aborted
YIS0211
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0211 LOAD-IPSEC-DB command executed
YIS0212
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0212 operand error occured
YIS0213
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0213 value of an operand erroneous
YIS0215
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0215 operand suppressed
YIS0216
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0216 command not supported
YIS0217
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : YES
YIS0217 during LOAD-IPSEC-DB "(&00)" error occured
YIS0218
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : YES
YIS0218 reading IPSEC-DB file "(&00)" "(&01)" error(s) and "(&02)" warning(s) occurs.
YIS0219
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : YES
YIS0219 IPSEC-DB file: "(&00)" read successfully
YIS0220
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : YES
YIS0220 reading IPSEC-DB file "(&00)" "(&01)" warning(s) occurs.
YIS0222
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0222 START-IPSEC-MONITORING command aborted
YIS0223
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0223 START-IPSEC-MONITORING command executed
YIS0224
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0224 STOP-IPSEC-MONITORING command aborted
YIS0225
Destination: USER-TASK, CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0225 STOP-IPSEC-MONITORING command executed
YIS0250
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0250 Error (&00) detected in line (&01) at column (&02)
Meaning
Error detected during read of IPSec configuration file
(&00): error text
(&01) : line with error
(&02) : column with error
YIS0251
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0251 Error (&00) detected in line (&01)
Meaning
Error detected during read of IPSec configuration file
(&00): error text
(&01) : line with error
YIS0252
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0252 Error: (&00)
Meaning
Error detected during read of IPSec configuration file.
(&00): error text
YIS0253
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0253 (&00) record (&01) in line (&02) already in database
Meaning
Already existing record detected
(&00): type of record
(&01) : name of record
(&02) : line with error
YIS0254
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0254 warning: sa according to POLICY record (&00) in line (&01) already in database
Meaning
Reading the IPSec configuration file a POLICY was detected which
has a SA alreay existing in the IPSec database.
(&00): name of record
(&01) : line of record
YIS0255
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0255 warning: overlapping ranges in POLICY record (&00) in line (&01). POLICY not created.
Meaning
Reading the IPSec configuration file a POLICY with
ranges was read, which is overlapping with a POLICY already in
the IPSEC data base.
(&00): name of record
(&01) : line of record
YIS0256
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0256 warning: POLICY record "(&00)" line "(&01)": PORTNUMBER, TYPE and CODE changed to ANY.
Meaning
Because PROTOCOL = ANY the port numbers, ICMP type and Code are
set to ANY, too.
(&00): name of record
(&01) : line of record
YIS0300
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0300 IPSEC MONITORING STARTED WITH "(&00)" SECONDS
Meaning
IPSec monitoring was started,
the cycle time was set to (&00) seconds.
YIS0301
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0301 IPSEC MONITORING STOPPED
Meaning
IPSec monitoring was stopped.
YIS0310
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0310 I/O'S=(I=(&00)/O=(&01)); SIGNAL/RECEIVE=(E=(&02)/A=(&03)); DISCARDS=(I=(&04)/O=(&05))
Meaning
Periodic message requested by /START-IPSEC-MONITORING
(&00): number of inputs
(&01) : number of outputs
(&02) : number of positive completion signals
(&03) : number of receive calls
(&04) : number of discarded input data elements
(&05) : number of discarded ouput data elements
YIS0311
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0311 openCrypt-BYTEs=(I=(&00)/O=(&01)); openCrypt-I/O's=(I=(&02)/O=(&03)); openCrypt-Calls=(&04); openCrypt-Errors=(&05)
Meaning
Periodic message requested by /START-IPSEC-MONITORING
(&00): number of openCrypt input bytes
(&01) : number of openCrypt output bytes
(&02) : number of openCrypt inputs
(&03) : number of openCrypt outputs
(&04) : number of (synchronous) openCrypt calls
(&05) : number of openCrypt errors
YIS0312
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0312 IPSec errors: SPI errors: (&00); signature errors: (&01); sequence number errors: (&02); IPSec protocol errors: (&03)
Meaning
Periodic message requested by /START-IPSEC-MONITORING
(&00): number of SPI's with error
(&01) : number of incorrect signatures
(&02) : number of incorrect sequence numbers
(&03) : number of incorrect IPSec protocols
YIS0401
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0401 ILLEGAL VALUE FOR SPI, OWN ADDR= (&00), PARTNER ADDR= (&01) , SPI = (&02)
Meaning
illegal value for SPI
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0402
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0402 INVALID SIGNATURE, OWN ADDR= (&00), PARTNER ADDR= (&01) , SPI = (&02)
Meaning
invalid signature
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0403
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0403 DECRYPTION FAILED, OWN ADDR= (&00), PARTNER ADDR= (&01) , SPI = (&02)
Meaning
Decryption failed
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0405
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0405 1. SA NECESSARY FOR INPUT BUT NOT AVAILABLE, OWN ADDR = (&00), PARTNER ADDR = (&01), SPI = (&02)
Meaning
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0406
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0406 2. SA NECESSARY FOR INPUT BUT NOT AVAILABLE, OWN ADDR= (&00), PARTNER ADDR = (&01), SPI = (&02)
Meaning
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0407
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0407 ILLEGAL SECURITY PROTOCOL HEADER, OWN ADDR= (&00), PARTNER ADDR= (&01) , SPI = (&02)
Meaning
illegal Security Protocol Header
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0408
Destination: CONSOLE Routing code: C Weight: 30
Warranty : NO
YIS0408 BAD SEQUENCE NUMBER, OWN ADDR= (&00), PARTNER ADDR= (&01) , SPI = (&02)
Meaning
bad Sequence Number
(&00): own IPV4 Address or IPV6 Address
(&01): partner IPV4 Address or IPV6 Address
(&02): Security Parameter Index
YIS0700
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0700 OPENCRYPT-(&00): (&01)-(&02); SESSION: (&03); RC: (&04)
Meaning
The openCrypt call resp. the openCrypt signal of function
(&01), action (&02) for session (&03) obtains
returncode (&04).
there means:
(&00): openCrypt call "CALL" resp. signal "SIGNAL"
(&01): openCrypt function causing the error
(&02): openCrypt action
(&03): openCrypt session-#
(&04): returncode of function
YIS0701
Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
YIS0701 OPENCRYPT TERMINATED
Meaning
Subsystem openCrypt has been terminated.
YIS0768
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
YIS0768 SYSSSI file: Syntactical error in "(&00)"
Meaning
Syntactical error in "(&00)" of SYSSSI file.
Response
Correct definition in SYSSSI file.
YIS0769
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
YIS0769 SYSSSI file: Processing of "(&00)" started
Meaning
Processing of "(&00)" of SYSSSI file started.
YIS089D
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
YIS089D "(&00)..." too long
Meaning
"(&00)..." of the SYSSSI file exceeds the maximal length.
Response
Correct definition in SYSSSI file.
YIS089E
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
YIS089E SYSSSI file processing aborted
Meaning
SYSSSI file processing is terminated owing to an error.
The reason is given in the previous message.
Response
Restart the subsystem.
YIS0890
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
YIS0890 SYSSSI file processing completed
Meaning
All definitions of the SYSSSI file have been processed.