Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMSCOPY Copyright (C) (&00) (&01). All Rights Reserved
VMS0000
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0000 MONITOR SYSTEM TERMINATED. VM2000 TERMINATION
Meaning
Because of a non-interruptible IDLE in the monitor system, the hypervisor
stops all activities.
VMS0004
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0004 HYPERVISOR INCONSISTENCY. TAKE SLED
Meaning
Termination of VM2000.
VMS0007
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0007 ILLEGAL GLOBAL INTERRUPT. TAKE SLED
Meaning
Termination of VM2000.
VMS0008
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0008 PE IN HYPERVISOR AT ADDRESS: (&00); EC: (&01). TAKE SLED
Meaning
Program error (PE) in the hypervisor.
(&00): Address in the hypervisor
(&01): Program interruption code (EC).
Response
Send the dump to the diagnosis department.
VMS0009
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0009 TEST HPVC PROCESSED. VM2000 TERMINATION
Meaning
VM2000 was stopped with the help of a "test" hypervisor call for
diagnostic reasons.
VMS0012
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0012 MACHINE CHECK INTERRUPT: SYSTEM DAMAGE
Meaning
Termination of VM2000.
VMS0013
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0013 MACHINE CHECK INTERRUPT: CHANNEL SUBSYSTEM DAMAGE
Meaning
Termination of VM2000.
VMS0014
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0014 MACHINE CHECK INTERRUPT: PROCESSOR DAMAGE
Meaning
An equipment malfunction, HW or FW, occured.
Response
Contact the system administrator.
VMS0016
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0016 HYPERVISOR STACK ERROR. TAKE SLED
Meaning
Hypervisor program stack overflow or underflow.
VMS0017
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0017 CPU (&00) detached by system
Meaning
The real CPU has been detached by system because of a hardware failure.
(&00): Number of the real CPU
Response
Contact the service technician.
VMS0018
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0018 MONITOR SYSTEM TERMINATED. VM2000 ADMINISTRATION NO LONGER POSSIBLE
Meaning
Crash in the monitor system without a restart option or a restart
failure. At least one guest system is still running.
Response
Perform SHUTDOWN of all guest systems if possible or try to restart the
monitor system via SVP (if the model supports this function).
VMS0019
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0019 MAIN MEMORY NOT CONTIGUOUS. VM2000 TERMINATION
Meaning
Possible reasons:
- The logical storage segments do not have contiguous absolute addresses.
- The main memory information is inconsistent.
Response
Contact the service technician.
VMS0020
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0020 System device '(&00)' cannot be assigned (CC (&01)). Startup aborted
Meaning
Error during assignment of a public disc or console to the Monitor VM.
(&00): Mnemonic device name
(&01): Condition Code
VMS0021
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0021 CPU (&00) detached by system. Reply (EOT)
Meaning
The real CPU has been detached by system because of a hardware failure.
To guarantee that the message will not be ignored an acknowledge is
requested.
(&00): Number of the real CPU
Response
Contact the service technician.
VMS0022
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0022 SPECIFIED HYPERVISOR SIZE TOO SMALL. STARTUP ABORTED
Response
Modify the HYPERVISOR-SIZE parameter and start the system anew.
VMS0023
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0023 CPU (&00) attached by system
Meaning
Due to a CPU failure a spare CPU has been attached by system.
(&00): Number of the real CPU
VMS0024
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS0024 CPU (&00) attached by system. Reply (EOT)
Meaning
Due to a CPU failure a spare CPU has been attached by system.
To guarantee that the message will not be ignored, an
acknowledge is requested.
(&00): Number of the real CPU
Response
Where appropriate contact the service technician.
VMS0025
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS0025 CPU '(&00)' SWITCHED BY SYSTEM FROM CPU POOL '(&01)' TO CPU POOL '(&02)'
Meaning
Due to a CPU failure VM2000 changes the CPU pool assignment
of the specified CPU.
(&00): CPU identification
(&01): Identification of the source CPU pool
(&02): Identification of the target CPU pool
VMS0026
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS0026 CPU POOL ASSIGNMENT OF VIRTUAL MACHINE ((&00),(&01)) CHANGED BY SYSTEM FROM CPU POOL '(&02)' TO CPU POOL '(&03)'
Meaning
Due to a CPU failure VM2000 changes the CPU pool assignment
of the specified virtual machine.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the source CPU pool
(&03): Identification of the target CPU pool
VMS0027
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS0027 CPU POOL ASSIGNMENT OF VM GROUP '(&00)' CHANGED BY SYSTEM FROM CPU POOL '(&01)' TO CPU POOL '(&02)'
Meaning
Due to a CPU failure VM2000 changes the CPU pool assignment
of all virtual machines assigned to the specified VM group.
(&00): Name of the VM group
(&01): Identification of the source CPU pool
(&02): Identification of the target CPU pool
VMS1000
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1000 YOU HAVE ALREADY OPENED AN ADMINISTRATION DIALOG TO VIRTUAL MACHINE ((&00), (&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
Response
If necessary, issue /END-VM-DIALOG.
VMS1001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1001 FOR THE VIRTUAL MACHINE ((&00),(&01)) AN ADMINISTRATION DIALOG VIA $VMCONS IS ALREADY OPENED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS1002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1002 VM2000 COMMAND NOT PERMITTED FOR THE MONITOR VM. /(&00) REJECTED
VMS1003
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1003 NO AUTHORIZATION EXISTS TO ADMINISTER OTHER VIRTUAL MACHINES. /(&00) REJECTED
Meaning
The VM administrator may administer only the VM connected to his own
terminal.
VMS1004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1004 NO AUTHORIZATION EXISTS TO ISSUE VM2000 ADMINISTRATOR COMMANDS. /(&00) REJECTED
Meaning
This command may only be used by the VM2000 administrator.
VMS1009
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1009 VM2000 COMMAND NOT PERMITTED FROM A VM2000 CONSOLE. /(&00) REJECTED
VMS1010
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1010 YOU ARE NOT CONNECTED WITH A VIRTUAL MACHINE. /(&00) REJECTED
Response
Establish a logical link between the terminal and the VM by means of a
/BEGIN-VM-DIALOG command.
VMS1012
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1012 PARTNER HAS TERMINATED AN ADMINISTRATION DIALOG WITH VIRTUAL MACHINE ((&00),(&01)). ADMINISTRATION-ID USED: (&02)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Authorization-Name given by UCON or TSN of user task
VMS1013
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1013 PARTNER '(&00)' HAS STARTED AN ADMINISTRATION DIALOG WITH VIRTUAL MACHINE ((&01),(&02)). ADMINISTRATION-ID USED: (&03)
Meaning
(&00): Identification of the partner
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): Authorization-Name given by UCON or TSN of the user task
VMS1015
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1015 THERE IS NO VM ADMINISTRATOR FOR THE VIRTUAL MACHINE ((&00),(&01)). /(&02) REJECTED
Meaning
The command can be processed only if there is a VM administrator
connected to the virtual machine.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS1016
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1016 PARTNER '(&00)' TRIES TO ESTABLISH CONNECTION TO VIRTUAL MACHINE ((&01), (&02)) WITHOUT SUCCESS
Meaning
(&00): Identification of the partner
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
If this message recurs with an identical partner identification, the
user's authorization should be checked for security reasons.
VMS1024
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1024 INVALID PASSWORD FOR DIALOG-AUTHORIZATION WITH VM ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Reenter command with correct password.
VMS1030
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1030 BCAM APPLICATION '$VMCONS' READY
VMS1032
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1032 PARTNER HAS TERMINATED A VC DIALOG WITH VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS1033
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1033 PARTNER '(&00)' HAS STARTED A VC DIALOG WITH VIRTUAL MACHINE ((&01),(&02))
Meaning
(&00): Identification of the partner
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS1034
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1034 YOU HAVE ALREADY OPENED A VC DIALOG WITH VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS1035
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1035 MAXIMUM NUMBER OF ADMINISTRATION/VC DIALOGS FOR THE VIRTUAL MACHINE ((&00), (&01)) ALREADY REACHED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS1036
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1036 VC dialogs with the Monitor VM are not permitted
VMS1037
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1037 NO CORRESPONDING DIALOG HAS BEEN STARTED FOR THE VIRTUAL MACHINE ((&00), (&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS1038
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS1038 VC dialogs are not permitted for user tasks
Meaning
A VC dialog is only possible via a $VMCONS connection.
VMS1039
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1039 THE SPECIFIED DIALOG TYPE IS NOT ALLOWED
VMS1040
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1040 BCAM APPLICATION '$VMCONS' NO LONGER AVAILABLE
VMS1050
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS1050 VC DIALOG WITH KVP '(&02)' OF VIRTUAL MACHINE ((&00),(&01)) COULD NOT BE ESTABLISHED
Meaning
(&00): Index of virtual machine
(&01): Name of virtual machine
(&02): Mnemonic device name of KVP output path
Response
Check the corresponding KVP user id (password) and
retry the command later.
VMS1051
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS1051 VC DIALOG WITH KVP '(&02)' OF VIRTUAL MACHINE ((&00),(&01)) TERMINATED ABNORMALLY
Meaning
(&00): Index of virtual machine
(&01): Name of virtual machine
(&02): Mnemonic device name of KVP output path
Response
Try to establish the VC dialog again by command
/BEGIN-VM-DIALOG TYPE=*VC.
VMS1502
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1502 LOG ON TIMEOUT. NO DIALOG WITH '$VMCONS' INITIATED
Meaning
/BEGIN-VM-DIALOG not issued within the time limit.
VMS1505
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1505 PROCEDURE MODE ALREADY ACTIVE FOR THE REQUESTED VIRTUAL MACHINE
Meaning
Only one procedure can be active at a time for a virtual machine.
Response
Try again later.
VMS1506
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1506 PROCEDURE FILE '(&00)' NOT OF TYPE 'SAM' OR 'ISAM'
Meaning
(&00): Name of the procedure file.
VMS1507
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1507 INVALID PARAMETER(S) IN CONTINUATION LINE. '/(&00)' REJECTED
VMS1508
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1508 COMMAND '/(&00)' IN PROCEDURE TOO LONG
VMS1509
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1509 COMMAND IN PROCEDURE IS NOT PREFIXED WITH '/'. INPUT REJECTED
VMS1520
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1520 VM/GS PREFIX NOT YET GENERATED. INPUT REJECTED
VMS1521
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1521 PARTNER CANNOT BE REACHED. DCAM RETURN INFORMATION: '(&00)'
Meaning
(&00): DCAM return information.
VMS1522
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1522 MAXIMUM NUMBER OF ADMINISTRATION/VC DIALOGS ALREADY REACHED. INPUT REJECTED
VMS1523
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1523 Connecting to $CONSOLE failed. Dialog via $VMCONS not possible
Meaning
The reason has been usually output in a preceding message NBR0717.
Response
Please check, if the use of $VMCONS has been prepared correctly.
VMS1524
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1524 MAXIMUM NUMBER OF APPLICATIONS CONNECTED TO $CONSOLE ALREDY REACHED. NEW DIALOG VIA $VMCONS IMPOSSIBLE
VMS1531
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1531 CONNECTION TO PARTNER ((&00),(&01)) SEVERED BY '$VMCONS'. ADMINISTRATION-ID USED: (&02)
Meaning
The messages addressed to partner ((&00),(&01)) have not been picked up,
despite of repeated prompts to do so, or the network connection has been
interrupted. /END-VM-DIALOG was initiated due '$VMCONS'.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Authorization-Name given by UCON.
VMS1540
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1540 (&00)
Meaning
(&00): VM2000 command output text
VMS1561
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1561 PROCEDURE FILE '(&00)' NOT CATALOGED
Meaning
(&00): Name of the Procedure File
VMS1562
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1562 ERROR 'DMS(&01)' DURING OPENING OF THE PROCEDURE FILE '(&00)'
Meaning
(&00): Name of the Procedure File
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS1563
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1563 ERROR 'DMS(&01)' DURING ACCESSING THE PROCEDURE FILE '(&00)'
Meaning
(&00): Name of the Procedure File
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01). After the correction of
the error the procedure can be recalled.
VMS1564
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1564 ERROR 'DMS(&01)' DURING CLOSING THE PROCEDURE FILE '(&00)'
Meaning
(&00): Name of the Procedure File
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS1600
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1600 INPUT FROM VC DIALOG IGNORED. REASON: '(&00)'
Meaning
An input from a VC dialog could not be processed correctly.
(&00): '01', the virtual machine is not initialized
'02', either a virtual console is not defined for the virtual
machine or has not been attached to the guest system,
'03', input is longer than 256 characters
'04', the last input has not yet been completely processed
'05', the virtual machine is inoperable
VMS1601
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1601 USER ERROR '(&02)' AT VC DIALOG WITH VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): '01', the virtual machine is not initialized
'02', a virtual console is no longer specified for the
virtual machine
'03', a command input medium is not assigned to the
virtual machine
Response
If '01': Create VM again by means of /CREATE-VM
'02': Specify the virtual console by means of /ADD-VM-DEVICES
'03': Assign a command input medium with /BEGIN-VM-DIALOG
and restart the virtual machine with /START-VM.
VMS1602
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS1602 SOME OUTPUT MESSAGES TO VC DIALOG WITH THE VIRTUAL MACHINE ((&00),(&01)) MAY HAVE BEEN LOST
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
If necessary look for missing messages in the KVP logging or
the BS2000 console logging.
VMS2000
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2000 VIRTUAL MACHINE ((&00),(&01)) ALREADY IN WAIT STATE
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2001 VIRTUAL MACHINE ((&00),(&01)) NOT IN WAIT STATE
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2002 NO ADDRESS STOP SET AT LOCATION ('(&00)',(&01)) FOR VIRTUAL MACHINE ((&02), (&03)). /(&04) REJECTED
Meaning
The address stop at the specified location does not exist or has been
overwritten.
(&00): Address where the stop was expected
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2003
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2003 ADDRESS STOP AT LOCATION ('(&00)',(&01)) FOR VIRTUAL MACHINE ((&02),(&03)) NOT ACCESSIBLE
Meaning
The address stop could not be processed, because the page concerned is
currently not available in main memory.
(&00): Address where the stop was expected
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2004 MAXIMUM NUMBER OF ADDRESS STOPS ((&00)) HAS ALREADY BEEN REACHED FOR VIRTUAL MACHINE ((&01),(&02)). /(&03) REJECTED
Meaning
(&00): Maximum number of the address stops for one VM
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
VMS2005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2005 VIRTUAL MACHINE ((&00),(&01)) STOPPED AT LOCATION ('(&02)',(&03)), CPU (&04)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Location at which the virtual machine was stopped
(&03): Address mode (virtual/real)
(&04): Number of the virtual CPU
VMS2006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2006 EXPECTED-CONTENTS=X'(&00)' DOES NOT MATCH MEMORY CONTENTS OF VIRTUAL MACHINE ((&01),(&02)). /(&03) REJECTED
Meaning
(&00): Contents of the EXPECTED-CONTENTS operand
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
Response
Correct the value of the EXPECTED-CONTENTS operand in the
/MODIFY-VM-MEMORY(-CONTEXT) command and reissue the command.
VMS2007
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2007 LOCATION '(&00)' ((&01)) DOES NOT EXIST FOR VIRTUAL MACHINE ((&02),(&03)) /(&04) REJECTED
Meaning
If the address is real in the VM domain then it lies outside the domain
of the virtual machine.
If the address is virtual, then in the corresponding guest system of the
virtual machine it could not be translated.
(&00): Location lying outside the specified domain
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2008
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2008 AREA IS NOT ADDRESSABLE FOR VIRTUAL MACHINE ((&03),(&04)) (START ADDRESS '(&00)' ((&01)), LENGTH '(&02)'). /(&05) REJECTED
Meaning
If the address is real, then part of the specified area lies outside
the domain of the virtual machine.
If the address is virtual, then an address within the domain could not
be translated in the guest system of the virtual machine.
(&00): Start address of the specified area
(&01): Address mode (virtual/real/ESA)
(&02): Length of the specified domain in bytes
(&03): Index of the virtual machine
(&04): Name of the virtual machine
VMS2009
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2009 VIRTUAL ADDRESS '(&00)' OF VIRTUAL MACHINE ((&01),(&02)) NOT ACCESSIBLE. /(&03) REJECTED
Meaning
The virtual address could not be processed because the page concerned
is currently not available in main memory or the address stop code
has been changed.
(&00): Virtual address which could not be found because the page
concerned is not currently available in main memory
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS2010
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2010 ALL THE ADDRESS STOPS OF VIRTUAL MACHINE ((&00),(&01)) COULD NOT BE REMOVED
Meaning
The address stops could not all be removed, because the pages concerned
are not currently available in main memory or the address stop code has
been changed.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
Response
Request a list of the address stops with the help of the
/SHOW-VM-ATTRIBUTES command.
VMS2011
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2011 CPU (&00) OF VIRTUAL MACHINE ((&01),(&02)) STOPPED
Meaning
(&00): Number of the virtual CPU.
(&01): Index of the virtual machine.
(&02): Name of the virtual machine.
VMS2012
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2012 VIRTUAL MACHINE ((&00),(&01)) PLACED IN WAIT STATE BY THE VM2000 ADMINISTRATOR
Meaning
This wait state can be cancelled only by the VM2000 administrator.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2014
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2014 VM2000 PROGRAM ERROR. MODULE '(&00)', LABEL '###(&01)', ERROR CODE '(&02)'
Meaning
The monitoring task
continues command processing at a consistent label, VM2000 can be
continued.
(&00): Name of the VM2000 module in which the error occurred
(&01): Label in the VM2000 module (&00)
(&02): Further error information.
Response
In case one of the above errors occurred the VM2000 developers'
department should be informed about errors not yet known and diagnostic
documents should be sent (see VM2000 manual, chapt. "Error handling
in VM2000").
VMS2016
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2016 VIRTUAL MACHINE ((&00),(&01)) RESUMED BY THE VM2000 ADMINISTRATOR
Meaning
The VM2000 administrator has issued a /START-VM or /RESUME-VM command.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2019
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2019 AREA OF VIRTUAL MACHINE ((&03),(&04)) IS NOT ACCESSIBLE (START ADDRESS '(&00)' ((&01)), LENGTH '(&02)'). /(&05) REJECTED
Meaning
The specified area lies in a page which has been outpaged.
(&00): Start address of the specified area
(&01): Address mode (virtual/real/ESA)
(&02): Length of the specified area in bytes
(&03): Index of the virtual machine
(&04): Name of the virtual machine.
VMS2020
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2020 VIRTUAL MACHINE ((&00),(&01)) REMAINS IN WAIT STATE. FOR FURTHER INFORMATION ISSUE /SHOW-VM-ATTRIBUTES
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2021
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2021 VIRTUAL MACHINE ((&00),(&01)) TERMINATED BY THE VM2000 ADMINISTRATOR
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2022
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2022 ADDRESS STOP AT LOCATION ('(&00)',(&01)) ALREADY SET FOR VIRTUAL MACHINE ((&02),(&03)). /(&04) REJECTED
Meaning
(&00): Address where the stop point is to be set
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2023
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2023 CPU (&00) OF VIRTUAL MACHINE ((&01),(&02)) STARTED
Meaning
(&00): Number of the virtual CPU.
(&01): Index of the virtual machine.
(&02): Name of the virtual machine.
VMS2024
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2024 ADDRESS STOP AT LOCATION ('(&00)',(&01)) FOR VIRTUAL MACHINE ((&02),(&03)) OVERWRITTEN. /(&04) REJECTED
Meaning
(&00): Address where the stop was expected
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2028
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2028 ADDRESS STOP AT LOCATION ('(&00)',(&01)) FOR VIRTUAL MACHINE ((&02),(&03)) WAS SET BY THE VM2000 ADMINISTRATOR
Meaning
The address stop could not be removed because the VM administrator may
only remove stops set by himself.
(&00): Address where the stop was expected
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine
VMS2029
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2029 ADDRESS STOP AT LOCATION ('(&00)',(&01)) FOR THE VIRTUAL MACHINE ((&02), (&03)) REMOVED
Meaning
(&00): Address where the stop was before
(&01): Address mode (virtual/real)
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS2033
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2033 '(&00)' FROM VM ((&01),(&02)) VIA SVP
Meaning
(&00): Text of the SVP message.
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS2035
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2035 MEASURING FACILITIES CURRENTLY BEING USED BY VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS2036
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2036 MESSAGE FROM VIRTUAL MACHINE ((&00),(&01)): '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Message text.
VMS2037
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2037 NON-INTERRUPTIBLE WAIT STATE FOR VIRTUAL MACHINE ((&00),(&01)), CODE (&02), CPU (&03)
Meaning
Possible reasons:
- The guest system reached a non-interruptible wait state.
- In the virtual machine a sequence of program interruptions
has occurred.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): WAIT STATE code in hexadecimal format
(&03): Number of the virtual CPU
VMS2038
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2038 VIRTUAL MACHINE ((&00),(&01)) CURRENTLY IN TRACE-MODE
Meaning
The command can be only be processed after completion of the preceding
trace-order.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Retry later.
VMS2039
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2039 CPU(s) of virtual machine ((&00),(&01)) not assigned or inoperable
Meaning
(&00) Index of the virtual machine
(&01) Name of the virtual machine
VMS2050
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2050 GUEST SYSTEM ON VM ((&00),(&01)) READY
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2051
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2051 GUEST SYSTEM ON VM ((&00),(&01)) DOWN; REASON: (&02)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Reason for state of guest system:
- SHUTDOWN
- CRASH:
The guest system failed due to a system error.
- ADMINISTRATOR COMMAND:
The guest system was terminated by a system administrator
via IPL or "Abort VM".
- VM-ADMINISTRATOR COMMAND:
a) /START-VM has been issued for a guest system which is
already operable.
b) The guest system was terminated via the command /RESET-VM.
VMS2052
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2052 GUEST SYSTEM ON VM ((&00),(&01)) NOT READY. RESTART HAS BEEN INITIATED
Meaning
Possible reasons:
- An automatic RESTART has been initiated after a system error
in the guest system
- SHUTDOWN with RESTART initiated in the guest system
(&00): Index of virtual machine
(&01): Name of virtual machine
VMS2054
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2054 SHUTDOWN OF GUEST SYSTEM ON VM ((&00),(&01)) INITIATED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2055
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2055 SHUTDOWN NOT RECEIPTED BY GUEST SYSTEM ON VM ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
It has to be checked by means of the command /SHOW-VM-ATTRIBUTES that
the virtual machine will reach the state DOWN. If a VM2000 shutdown
with unlimited waiting time is in progress, someone has to see to the
termination of the guest system so that the VM2000 shutdown can be
finished.
VMS2056
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2056 SHUTDOWN OF GUEST SYSTEM ON VM ((&00),(&01)) ALREADY IN PROGRESS
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2057
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2057 APPLIED SHUTDOWN INTERFACE NOT SUPPORTED BY GUEST SYSTEM ON VM ((&00), (&01))
Meaning
Either the guest system is still in the startup phase or
the applied function is not supported by the guest system.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
After SYSTEM READY the guest system can be terminated by
the command /SHUTDOWN from its BS2000 console. Furthermore
the shutdown of the guest system can be initiated by the
VM administrator with /SHUTDOWN-VM.
VMS2058
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2058 SHUTDOWN REJECTED OR PROCESSED WITH WARNINGS BY GUEST SYSTEM ON VM ((&00), (&01)). REASON: (&02)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Message number (error cause in guest system)
VMS2059
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2059 SHUTDOWN OF GUEST SYSTEM ON VM ((&00),(&01)) ABORTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
If a VM2000 shutdown with unlimited waiting is in progress, it has to
be seen to the completion of the shutdown of the guest system, so that
the shutdown of VM2000 can also be completed.
VMS2070
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2070 VM ((&00),(&01)) IN WAIT STATE
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2100
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2100 VM2000 SHUTDOWN INITIATED
VMS2101
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
VMS2101 VM2000 SHUTDOWN IN PROGRESS. /(&00) REJECTED
Meaning
(&00): Command
VMS2102
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
VMS2102 VM2000 SHUTDOWN REJECTED BECAUSE NO APPROPRIATE MONITOR SYSTEM IS RUNNING
VMS2103
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
VMS2103 UNLIMITED WAITING FOR SHUTDOWN OF GUEST SYSTEM NOT PERMITTED
Meaning
A virtual machine is in state IN HOLD (WAIT) or the guest system
running on the virtual machine does not support the called function.
Response
Please repeat /SHUTDOWN-VM after the wait state of the virtual machine
has been suspended by /RESUME-VM or the operator has terminated the
guest system.
VMS2104
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2104 VM2000 SHUTDOWN INITIATED ALTHOUGH A VIRTUAL MACHINE IS IN WAIT STATE
Meaning
Virtual machines which are in state IN HOLD (WAIT) will be terminated
independently of their state by force after the waiting time in the
monitor system has expired.
VMS2105
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
VMS2105 /ENTER-JOB CANNOT BE PROCESSED IN A GUEST SYSTEM. VM2000 SHUTDOWN REJECTED
Meaning
/SHUTDOWN-VM with ACTION=*SHUTDOWN(...) has already been called
for a virtual machine.
VMS2200
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2200 VM2000 is not running on a Server Unit in an HA cluster
VMS2201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS2201 Information about the HA cluster not available
Response
Please retry the command after a short waiting time. If the
information about the HA cluster will still not be available,
please contact the administration.
VMS2202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS2202 Check for unambiguousness of VM name '(&00)' currently impossible
Meaning
(&00) - VM name
Response
Please retry the command after a short waiting time. If the check
will still not be possible, please contact the administration.
VMS2300
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2300 Definition of VM '(&00)' does not exist
Meaning
(&00): Name of the virtual machine
VMS2301
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2301 Definition of VM '(&00)' created
Meaning
(&00): Name of the virtual machine
VMS2302
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2302 Definition of VM '(&00)' deleted
Meaning
(&00): Name of the virtual machine
VMS2303
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2303 Definition of VM '(&00)' not accessible
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- The data communication system in BS2000 (BCAM) is not ready.
- No Management Unit is ready.
- There is a definition of a persistent virtual machine in the
storage for VM definitions that has the same name as an already
initialized (not persistent) virtual machine.
(&00): Name of the virtual machine
Response
A name conflict is reported by the message VMS2360 (requiring a
response) on the console of the monitor system. The conflict may
be resolved
- by deleting the definition of the persistent virtual machine
and replacing it by the definition of the already initialized
virtual machine or
- by terminating and deleting the already initialized virtual machine.
The first alternative solution will be processed automatically if the
message VMS2360 is answered with "Y". The second one has to be processed
manually by the VM or VM2000 administrator before the message VMS2360
is answered with "N".
After resolving a name conflict, there may occur further conflicts,
which have to be resolved in the same way.
VMS2305
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2305 Definition of VM '(&00)' could not be created. /(&01) rejected
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The connection to a Management Unit via the BS2000 data communication
system (BCAM) has been disturbed.
(&00): Name of the virtual machine
(&01): Command
Response
Try to remove the error cause and repeat the command, please.
VMS2306
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2306 Definition of VM '(&00)' could not be updated
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The connection to a Management Unit via the BS2000 data communication
system (BCAM) has been disturbed.
VM2000 attempts periodically to subsequently update the VM definition.
(&00): Name of the virtual machine
VMS2307
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2307 Definition of VM '(&00)' could not be modified. /(&01) rejected
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The connection to a Management Unit via the BS2000 data communication
system (BCAM) has been disturbed.
(&00): Name of the virtual machine
(&01): Command
Response
Try to remove the error cause and repeat the command, please.
VMS2308
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2308 Definition of VM '(&00)' could not be deleted
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The connection to a Management Unit via the BS2000 data communication
system (BCAM) has been disturbed.
VM2000 attempts periodically to subsequently delete the VM definition.
(&00): Name of the virtual machine
VMS2309
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2309 Definition of VM '(&00)' could not be deleted. /(&01) rejected
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The connection to a Management Unit via the BS2000 data communication
system (BCAM) has been disturbed.
(&00): Name of the virtual machine
(&01): Command
Response
Try to remove the error cause and repeat the command, please.
VMS2310
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2310 Processing of /(&00) for VM definition '(&01)' not acknowledged in time
Meaning
Problem in the communication with an external administration
component of the VM2000 system. It is uncertain whether the command
has been processed.
(&00): Command
(&01): Name of the VM definition
Response
Please check the VM definition with /SHOW-VM-DEFINITION. You have
possibly to repeat the command. If even a repetition does not work,
please contact the service.
VMS2311
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2311 MAXIMUM NUMBER ((&00)) OF VM DEFINITIONS ALLOWED ALREADY REACHED. /(&01) REJECTED
Response
If necessary, delete a VM definition.
VMS2312
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2312 NO VM DEFINITION WITH MATCHING VM NAME FOUND
VMS2313
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2313 Device '(&00)' specified with different usage type. /(&01) rejected
Meaning
Maybe the device was specified by a device range or a
wildcard specification.
(&00): Mnemonic device name
(&01): Command
VMS2314
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2314 Device usage conflict between pubset device '(&00)' and its pubres device '(&02)' during assignment to VM '(&01)'
Meaning
Pubset devices are specified in a VM definition by the respective
pubres device. Additionally, one of these pubset devices is specified
explicitly by its mnemonic device name but with a different device
usage than the pubres device.
(&00): Mnemonic device name of pubset device
(&01): Name of the virtual machine
(&02): Mnemonic device name of pubres device
VMS2315
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2315 Device '(&00)' already inserted with another type of usage in the definition of VM '(&01)'
Meaning
(&00): Mnemonic device name
(&01): Name of the virtual machine
VMS2316
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2316 VM index (&00) in VM definition '(&01)' greater than current maximum number ((&02)) of virtual machines. /(&03) rejected
Meaning
(&00): VM index
(&01): Name of the VM definition
(&02): Current maximum number of VMs
(&03): Command
Response
If the VM name is not a standard VM name, the VM index can be modified
with MODIFY-VM-DEFINITION.
VMS2317
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2317 Memory values not suitable with already inserted values in the definition of VM '(&00)'
Meaning
(&00): Name of the virtual machine
VMS2318
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2318 VM index (&00) in VM definition '(&01)' already used by an initialized virtual machine. /(&02) rejected
Meaning
(&00): VM index
(&01): Name of the VM definition
(&02): Command
Response
The VM index can be modified with MODIFY-VM-DEFINITION.
VMS2320
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2320 Definition of VM '(&00)' migrated to target SU '(&01)'
Meaning
(&00): Name of the virtual machine
(&01): Name of the Server Unit to which the definition of the
virtual machine has been migrated (target SU)
VMS2321
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2321 Definition of VM '(&00)' successfully created on target SU '(&01)', but error at the deletion of the local definition
Meaning
(&00): Name of the virtual machine
(&01): Name of the Server Unit to which the definition of the
virtual machine has been migrated (target SU)
Response
Please check with the help of /SHOW-VM-DEFINITION if
the VM definition does still exist locally. In this case
delete the VM definition with /DELETE-VM-DEFINITION, please.
If this command fails too, please contact the service.
VMS2323
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2323 Definition of VM '(&00)' could not be migrated to target SU '(&01)'. /(&02) rejected
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- No Management Unit is ready.
- The target SU (&01) has delivered an unexpected
HTTP status code.
(&00): Name of the virtual machine
(&01): Name of the Server Unit to which the definition of the
virtual machine should have been migrated (target SU)
(&02): Command
VMS2324
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2324 Migration of the definition of VM '(&00)' rejected by target SU '(&01)'. Reason: (&02)
Meaning
The reason for the rejection on the target SU (&01) can be
determined by /HELP-MSG for the message number which is issued
in the last insert of the message.
(&00): Name of the virtual machine
(&01): Name of the Server Unit to which the definition of the
virtual machine should have been migrated (target SU)
(&02): String which is composed of a VM2000 message number and
corresponding message inserts
VMS2325
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2325 Migration of the definition of VM '(&00)' not acknowledged in time by target SU '(&01)'
Meaning
Problem in the communication with an external administration
component of the VM2000 system.
The VM definition has not been deleted locally. Possibly, the
VM definiton has been already created on the target SU (&01).
(&00): Name of the virtual machine
(&01): Name of the Server Unit to which the definition of the
virtual machine should have been migrated (target SU).
Response
Please check if the VM definition has been already created on
the target SU. In this case delete the local VM definition with
/DELETE-VM-DEFINITION, please. Otherwise repeat the command. If
even a repetition does not cause the creation of the VM definition
on the target SU, please contact the service.
VMS2330
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2330 Storage for VM definitions accessible
VMS2331
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2331 Storage for VM definitions not accessible
VMS2332
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2332 Storage for VM definitions not accessible. /(&00) rejected
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- The data communication system in BS2000 (BCAM) is not ready.
- No Management Unit is ready.
- There is a definition of a persistent virtual machine in the
storage for VM definitions that has the same name as an already
initialized (not persistent) virtual machine.
(&00): Command
Response
A name conflict is reported by the message VMS2360 (requiring a
response) on the console of the monitor system. The conflict may
be resolved
- by deleting the definition of the persistent virtual machine
and replacing it by the definition of the already initialized
virtual machine or
- by terminating and deleting the already initialized virtual machine.
The first alternative solution will be processed automatically if the
message VMS2360 is answered with "Y". The second one has to be processed
manually by the VM or VM2000 administrator before the message VMS2360
is answered with "N".
After resolving a name conflict, there may occur further conflicts,
which have to be resolved in the same way.
VMS2340
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2340 Definition of VM '(&00)' recovered from remote SU '(&01)'
Meaning
(&00): Name of the virtual machine
(&01): Name of the remote Server Unit
VMS2341
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2341 No unique remote SU found
Meaning
There is not exactly one remote Server Unit in the cluster
in which the local Server Unit can be found.
VMS2342
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2342 Specified remote SU '(&00)' is equal to local SU
Meaning
(&00): Name of the remote Server Unit
VMS2343
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2343 Specified remote SU '(&00)' not in SU cluster with local SU
Meaning
(&00): Name of the remote Server Unit
VMS2344
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2344 Remote SU '(&00)' must not be running. /(&01) rejected
Meaning
(&00): Name of the remote Server Unit
(&01): Command
VMS2345
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2345 Definition of VM '(&00)' could not be recovered from remote SU '(&01)'
Meaning
Possible reason:
- The subsystem REWAS is not available.
- The subsystem REWAS has reported an internal error.
- The data communication system in BS2000 (BCAM) is not ready.
- The Management Unit (MU) of the remote Server Unit has
delivered an unexpected HTTP status code.
(&00): Name of the virtual machine
(&01): Name of the remote Server Unit
VMS2346
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2346 Definition of VM '(&00)' becomes ambiguous in SU cluster
Meaning
At the recovery of the VM definition from the remote Server Unit,
the deletion on the remote Server Unit failed at first and then
during the error recovery the deletion on the local Server Unit
failed.
(&00): Name of the virtual machine
Response
Avoid to activate and start the VM definition on the local as well as
on the remote Server Unit, please. If the data communication system
in BS2000 (BCAM) is ready, try to delete the VM definition locally by
/DELETE-VM-DEFINITION and repeat the command.
VMS2347
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2347 Local SU not found in any SU cluster. /(&00) rejected
Meaning
(&00): Command
SU: Server Unit
VMS2350
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2350 Definition of active VM ((&00),(&01)) not found. Recreation initiated
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2360
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2360 Ambiguous VM name '(&00)'. Is persistent VM definition to be deleted and replaced by definition of already initialized VM? Reply (Y=Yes; N=No)
Meaning
There is a definition of a persistent virtual machine in the
storage for VM definitions that has the same name as an already
initialized (not persistent) virtual machine.
(&00): Name of the virtual machine
Response
If you want to keep the initialized virtual machine, answer 'Y',
please. In this case the persistent definition will be deleted and
replaced by the definition of the initialized virtual machine.
If you want to preserve the persistent definition, terminate
(/SHUTDOWN-VM) and delete (/DELETE-VM) the initialized virtual
machine and AFTERWARDS answer 'N', please.
VMS2400
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2400 Unknown SU '(&00)'. /(&01) rejected
Meaning
(&00): Name of Server Unit specified in the command
(&01): Command
VMS2401
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2401 Live migration of a VM already in progress
Meaning
If this message is issued directly, a live migration of
a VM from the own to another SU is currently in progress.
If the message key is issued as insert of the message
VMS2404, then another VM is taken over currently by the
target SU due to a live migration.
SU: Server Unit
VMS2402
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2402 Target SU '(&00)' unavailable
Meaning
Possible causes:
- The target SU (&00) does not comply with the requirements for a
successful migration.
- The connection to the target SU (&00) could not be established.
(&00): Name of the Server Unit which should be the target of the
migration (target SU)
Response
If the cause is not clear on SU /390, please increase the trace level
of the Monitor VM with /MODIFY-VM-ATTRIBUTES VM-ID=1,TRACE-LEVEL=*STD,
repeat the command and take a VMDUMP. After resetting the trace level
contact the service, please.
VMS2403
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2403 Connection to target SU '(&00)' disturbed
Meaning
(&00): Name of the Server Unit which should be the target of the
migration (target SU)
VMS2404
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2404 Live migration of VM ((&00),(&01)) rejected by target SU '(&02)'. Reason: (&03)
Meaning
The reason for the rejection on the target SU (&02) can be
determined by /HELP-MSG-INFORMATION for the message number
which is output in the last insert of the message.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should be migrated (target SU)
(&03): String which is composed of a VM2000 message number and
corresponding message inserts
VMS2405
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2405 Live migration of VM ((&00),(&01)) in current state not permitted
Meaning
Possible causes:
- A migration of the VM is already in progress.
- A memory reconfiguration for the VM is in progress.
- Start or restart of the VM is in progress.
- Shutdown of the VM which has been initiated by /SHUTDOWN-VM
is in progress.
- The VM has been terminated abnormally.
- The VM has been stopped by command.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2406
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2406 Live migration not supported by guest system of VM ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS2407
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2407 Start of live migration to target SU '(&02)' rejected by guest system of VM ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2408
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2408 Start of live migration to target SU '(&02)' not confirmed in time by guest system of VM ((&00),(&01)). /(&03) rejected
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): Command
VMS2409
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2409 Live migration of VM ((&00),(&01)) to target SU '(&02)' rejected by administration component of VM system
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should be migrated (target SU)
VMS2410
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2410 Target SU '(&00)' not in active SU cluster with source SU
Meaning
There is no SU cluster (with function "LM") established and active that
contains the specified target SU (&00) as well as the local source SU
as its members, or the inquiry of the cluster configuration has failed.
(&00): Name of the Server Unit to which the virtual machine
should be migrated (target SU)
SU: Server Unit
Response
Please, check and correct the SU name specified in the command.
If necessary, let the service establish or extend an SU cluster
to include both SUs.
VMS2411
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2411 Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted after restart of monitor system
Meaning
The live migration was aborted, because the message VMS2444 was
answered with "N" at the console of the monitor system.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2412
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2412 Monitor memory shortage. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
Check the state of the system, please. Possibly, the
live migration can be processed a little bit later.
VMS2413
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2413 Connection to target SU '(&02)' disturbed. Live migration of VM ((&00), (&01)) aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2414
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2414 Continuation of the live migration of VM ((&00),(&01)) to target SU '(&02)' rejected by guest system
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2415
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2415 Continuation of the live migration of VM ((&00),(&01)) to target SU '(&02)' not confirmed in time by guest system. Processing aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2416
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2416 Detach of device '(&03)' rejected by guest system. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): Mnemonic device name
VMS2417
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2417 Detach of device '(&03)' not confirmed in time by guest system. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): Mnemonic device name
VMS2418
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2418 Device '(&03)' is busy. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): Mnemonic device name
VMS2419
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2419 Internal error. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2420
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2420 Live migration of VM ((&00),(&01)) to target SU '(&02)' processed, but VM could not be deleted locally
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
has been migrated (target SU)
VMS2421
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS2421 Live migration of VM ((&00),(&01)) aborted by VM2000 on target SU '(&02)'. Reason: (&03)
Meaning
The reason for the abort on the target SU (&02) can be determined
by /HELP-MSG-INFORMATION for the message number which is output
in the last insert of the message.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): String which is composed of a VM2000 message number and
the corresponding message inserts
VMS2422
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2422 Error recovery or reconfiguration in progress. Live migration of VM ((&00), (&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
If a retry of the migration leads to an abort with the same
message, please take a VMDUMP and contact the service.
VMS2423
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2423 Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted by administration component of VM system
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2424
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2424 VM deleted regardless to its state. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2425
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2425 Changing memory pages cannot be transferred in time. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
If the trace level of the Monitor VM is set to the default value *OFF,
please increase it with /MODIFY-VM-ATTRIBUTES VM-ID=1,TRACE-LEVEL=*STD.
Then try again to migrate the virtual machine. If the migration is
aborted with the same message, please take a VMDUMP and contact the
service.
If the trace level has been already set to *STD or *MAX, you can take
the VMDUMP directly without a retry of the migration.
You can determine the current trace level with the VMDUMP command 'S'.
If you have increased the trace level, you should reset it again.
VMS2426
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2426 Hypervisor memory exhausted. Live migration of VM ((&00),(&01)) to target SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
Please check the specification of the hypervisor main memory size
in the startup parameter file of BS2000 OSD/BC.
If there is specified HYPERVISOR-SIZE=*BY-SYSTEM (default value),
please take a VMDUMP and contact the service.
If there is specified an explicit value for the hypervisor main
memory size, this value may be too small. Possibly you can free
some space for the hypervisor by deleting a VM (of less importance).
VMS2430
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2430 Live migration of VM ((&00),(&01)) from source SU '(&02)' started
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit from which the virtual machine
is migrating (source SU)
VMS2431
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2431 Live migration of VM ((&00),(&01)) from source SU '(&02)' completed
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit from which the virtual machine
has been migrated (source SU)
VMS2432
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2432 VM ((&00),(&01)) resumed at live migration from source SU '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit from which the virtual machine
is migrating (source SU)
VMS2433
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2433 Live migration of VM ((&00),(&01)) from source SU '(&02)' completed with warnings in the guest system
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit from which the virtual machine
has been migrated (source SU)
Response
Please look for the warnings in the KVP logging or the BS2000
console logging of the migrated VM.
VMS2434
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2434 Live migration of VM ((&00),(&01)) from source SU '(&02)' aborted
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit from which the virtual machine
should have been migrated (source SU)
Response
If the cause for the abort of the live migration is not evident,
please take a VMDUMP on the source SU and contact the service.
VMS2436
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2436 Configuration of device '(&00)' on target SU not compatible with that on the source SU
Meaning
(&00): Mnemonic device name
SU: Server Unit
Response
Please check the device type of the affected I/O device.
SU /390: Please check the channel path identifiers (a subset of CHPIDs
must be same on both SUs) and the channel path availability
on the target SU.
If a channel path of the affected device is offline on the
target SU, attach it in the monitor system on the target SU.
If the affected device is a disk device, please check also
the zoning and LUN masking and then execute command
/CHECK-VM-DISK-CONFIGURATION on the target SU.
SU x86: Check the device generation (host connector and unit id) of
the affected device.
If the cause of the incompatibility is evident, please try to resolve
it or remove the affected device from the VM to be migrated.
In all other cases take a VMDUMP on both SUs and contact the service.
VMS2437
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2437 Device '(&00)' not assignable to virtual machine on target SU
Meaning
The device is already assigned (exclusively) to another VM.
(&00): Mnemonic device name
SU: Server Unit
VMS2438
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2438 VM name not available on target SU
Meaning
On a Server Unit (SU), VM names have to be unique.
VMS2439
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2439 Migrating VM could not be established on target SU within time limit
Meaning
Setup of the migrating VM on the target SU (including assignment
of all its devices) was not completed in time.
SU: Server Unit
Response
If the assignment of some particular devices took several seconds
(cp. time stamps of VMS4005 in CONSLOG), please check the hardware
configuration and operability of the affected devices. In all other
cases take VMDUMP on the target SU and contact the service!
VMS2440
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2440 Live migration of VM ((&00),(&01)) could not be aborted on target SU '(&02)' due to a connection error
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2441
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2441 Live migration of VM ((&00),(&01)) could not be aborted on target SU '(&02)' due to a connection error. Retry in progress
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
VMS2442
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2442 Connection error at live migration of VM ((&00),(&01)). VM already resumed on target SU '(&02)'? Reply (Y=Yes; N=No)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
If the VM has already been resumed on the target SU, answer 'Y',
please. In this case the VM will be deleted locally. Otherwise
answer 'N', please. The live migration will be aborted.
VMS2443
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2443 Abort of live migration of VM ((&00),(&01)) rejected by target SU '(&02)'. VM already resumed on target SU? Reply (Y=Yes; N=No)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
If the VM has already been resumed on the target SU, answer 'Y',
please. In this case the VM will be deleted locally. Otherwise
answer 'N', please. The live migration will be aborted locally.
VMS2444
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2444 Monitor restart at live migration of VM ((&00),(&01)). VM already resumed on target SU '(&02)'? Reply (Y=Yes; N=No)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
Response
If the VM has already been resumed on the target SU, answer 'Y',
please. In this case the VM will be deleted locally. Otherwise
answer 'N', please. The live migration will be aborted locally.
VMS2450
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2450 Live migration of VM ((&00),(&01)) to target SU '(&02)' started
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
is migrating (target SU)
VMS2451
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2451 Live migration of VM ((&00),(&01)) to target SU '(&02)' completed
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
has been migrated (target SU)
VMS2452
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2452 VM ((&00),(&01)) suspended at live migration to target SU '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
is migrating (target SU)
VMS2460
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS2460 Live migration of VM ((&00),(&01)) to target SU '(&02)' possible
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should be migrated (target SU)
VMS2461
Destination: USER-TASK Routing code: Weight: 70
Warranty : YES
VMS2461 Live migration of VM ((&00),(&01)) to target SU '(&02)' not possible
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should be migrated (target SU)
VMS2462
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS2462 Requirements for live migration of VM ((&00),(&01)) to target SU '(&02)' not fulfilled. /(&03) rejected
Meaning
Possible reasons have been output in previous messages.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
should have been migrated (target SU)
(&03): Command
VMS2470
Destination: USER-TASK Routing code: Weight: 70
Warranty : YES
VMS2470 Specified target SU '(&00)' is equal to local SU
Meaning
(&00): Name of target SU specified in the command
SU: Server Unit
VMS2471
Destination: USER-TASK Routing code: Weight: 70
Warranty : YES
VMS2471 Device '(&00)' will be detached by live migration
Meaning
(&00): Mnemonic device name
VMS2472
Destination: USER-TASK Routing code: Weight: 70
Warranty : YES
VMS2472 Device '(&00)' (physically) different on target SU '(&01)'
Meaning
1) If the device is assigned to the migrating VM:
The physical entity of the specified device on the target
SU (&01) differs from that on the source SU or cannot be
determined.
2) If the device is not assigned to the migrating VM (SU x86):
The device generation (type, host connector or unit id) of the
specified device on the target SU differs from that on the
source SU.
(&00): Mnemonic device name
(&01): Name of the Server Unit to which the virtual machine
is migrating (target SU)
SU: Server Unit
Response
1) If this warning was issued for command /CHECK-VM-MIGRATION on SU /390
and the physical entity of the device is to be the same, first
execute command /CHECK-VM-DISK-CONFIGURATION (on the target SU
as well as on the source SU) to update both disk configurations.
Then repeat command /CHECK-VM-MIGRATION, please. If the physical
entity is still different, check the zoning and LUN masking.
2) Please try to resolve the inconsistent device generation. Note
that the persisting inconsistence would prohibit an assignment of
this device to the migrated VM on the target SU later on.
VMS2480
Destination: USER-TASK Routing code: Weight: 70
Warranty : YES
VMS2480 Live migration of VM ((&00),(&01)) to target SU '(&02)' started in spite of warnings
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the Server Unit to which the virtual machine
is migrating (target SU)
Response
Pay attention to the warnings, please.
VMS3000
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS3000 VM2000 COMMAND /(&00) FOR VIRTUAL MACHINE ((&01),(&02)) PROCESSED SUCCESSFULLY
Meaning
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS3001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3001 VM2000 COMMAND FOR VIRTUAL MACHINE ((&01),(&02)) COULD NOT BE PROCESSED SUCCESSFULLY. /(&00) REJECTED
Meaning
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
Identify the error with the aid of the preceding messages and correct it,
then try again.
VMS3002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3002 INVALID VALUE OF OPERAND '(&00)' IN VM2000 COMMAND. /(&01) REJECTED
VMS3003
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3003 INVALID COMBINATION OF '(&00)' AND '(&01)'. /(&02) REJECTED
VMS3004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3004 VALUE LIST OF OPERAND '(&00)' IN COMMAND '/(&01)' CONTAINS MULTIPLE SPECIFIED ELEMENTS
VMS3005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3005 COMMAND NOT SUPPORTED
VMS3006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3006 TRACE END FOR VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS3007
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3007 VM PROCEDURE PROCESSED FOR VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS3008
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3008 VM PROCEDURE FOR VIRTUAL MACHINE ((&00),(&01)) TERMINATED WITH ERRORS
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Correct the procedure and retry.
VMS3010
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3010 ILLEGAL COMMAND IN PROCEDURE FILE. /(&00) REJECTED
VMS3011
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3011 COMMAND '/(&00)' NOT SUPPORTED FOR THIS HSI
VMS3012
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3012 OPERAND '(&00)' NOT SUPPORTED FOR THIS HARDWARE. /(&01) REJECTED
VMS3014
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3014 /(&00) REJECTED FOR VIRTUAL MACHINE ((&01),(&02)) BECAUSE 'ADMIN-PRIVILEGES=*MIN' IS SPECIFIED
Meaning
The privileged options open to the VM2000 administrator have been
limited by means of ADMIN-PRIVILEGES=*MIN.
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS3015
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3015 PERIODIC OUTPUT OF MONITORING DATA ALREADY STARTED BY (&00) '(&01)'. COMMAND REJECTED
Meaning
When a periodic output of monitoring data has been initiated for
a virtual machine by an administrator, a different administrator
may not interrupt the processing by issuing a new command.
(&00): Keyword: CONSOLE or TASK or APPLICATION
(&01): Identification of VM2000-Administrator:
Console Mnemonic or TSN or
Authorization Name of Authorized User Program
Response
Stop running periodic output of monitoring data where required
and reenter the command.
VMS3016
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3016 PERIODIC OUTPUT OF MONITORING DATA STARTED
VMS3017
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3017 PERIODIC OUTPUT OF MONITORING DATA IS NOT BEING PERFORMED NOW. /(&00) REJECTED
Meaning
If the command is entered with the default value *NO for the
parameter PERIOD, only the periodic display of the measurement
data is stopped.
Response
You have to specify a time interval in seconds for the parameter PERIOD
if you want to collect and display periodically measurement data.
VMS3018
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3018 No measurement object specified
VMS3019
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS3019 No virtual machine with matching VM name found. Command rejected
VMS3025
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3025 No monitoring data for last interval
VMS3026
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3026 No monitoring data for SHOW-VM-STATUS *RECENT available
VMS3027
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3027 Monitoring data collection for SHOW-VM-STATUS *RECENT aborted
VMS3029
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3029 PERIODIC OUTPUT OF MONITORING DATA TERMINATED
VMS3030
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3030 Operand '(&00)' not supported for this HSI
Meaning
HSI: hardware/software interface.
VMS3031
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3031 OPERAND '(&00)' NOT ALLOWED FOR VIRTUAL MACHINE ((&01),(&02))
VMS3032
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3032 VALUE OF OPERAND '(&00)' NOT SUPPORTED FOR THIS HSI. /(&01) REJECTED
Meaning
(&00): Name of operand
VMS3033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3033 ADMIN-PRIVILEGES=*MAX not allowed for the Monitor VM. Command rejected
VMS3034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3034 ADMIN-PRIVILEGES=*MIN only allowed for the Monitor VM. Command rejected
VMS3035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3035 IO-PRIORITY privilege cannot be set for VM ((&00),(&01)). Command rejected
Meaning
The total number of virtual CPUs of all VMs with the IO-PRIORITY
privilege may not exceed the number of available real CPUs.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS3036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3036 VM-NAME and VM-INDEX do not correspond. Command rejected
VMS3037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3037 No select operand specified. Command rejected
Meaning
Because the output of detailed information for all the devices may be
very extensive, explicit selection operands must be specified.
This is to avoid an unintended (longtime) blocking of the console
or the $VMCONS-dialog.
Response
To obtain detailed information for all the devices, specify UNITS=*ALL.
VMS3038
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3038 PERSISTENT=*YES not allowed for the Monitor VM. Command rejected
VMS3040
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3040 COMMAND NOT PROCESSED FOR THE VIRTUAL MACHINE ((&00),(&01)) BECAUSE OF THE STATE OF THE VM
Meaning
The command with the option CHECK-VM-STATE=*YES is only allowed for a
VM in the state "INIT-ONLY" or "DOWN".
Response
If justifiable, reenter the command with CHECK-VM-STATE=*NO.
VMS3041
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
VMS3041 COMMAND NOT PROCESSED FOR MIGRATING VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Please repeat the command, after the migration of the VM has been
finished!
VMS3042
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
VMS3042 VIRTUAL MACHINE ((&00),(&01)) IS MIGRATING. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Command
Response
Please retry the command, after the migration of the VM has been
finished!
VMS3050
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3050 VIRTUAL MACHINE ((&00),(&01)) CREATED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS3051
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS3051 Virtual machine ((&00),(&01)) reset
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4000
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4000 VIRTUAL MACHINE ((&00),(&01)) NOT YET INITIALIZED. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
If necessary, initialize the VM concerned.
VMS4001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4001 No virtual machine with matching VM name found
VMS4002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4002 VIRTUAL MACHINE ((&00),(&01)) COULD NOT BE TERMINATED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4003
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4003 DEVICE '(&00)' IS BUSY. COMMAND REJECTED FOR VIRTUAL MACHINE ((&01),(&02))
Meaning
A device can only be removed if it has terminated all its
I/O operations.
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
Retry the command after the device concerned has terminated
its I/O operations or remove the device with FORCE=*YES.
VMS4004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4004 DEVICE '(&00)' ALREADY ASSIGNED EXCLUSIVELY TO VM ((&01),(&02))
Meaning
A device may be assigned exclusively to one VM only.
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS4005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4005 DEVICE '(&00)' ASSIGNED TO VIRTUAL MACHINE ((&01),(&02)) (&03) (&04)
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): "(TYPE=SD)" or "(TYPE=VC)" if explicitly specified by command
(&04): Cause:
- Blank: VM2000 administrator command
- "(BY GUEST)": Implicit assign by guest system
- "(BY SYSADM)": Action of the system administration
VMS4006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4006 DEVICE '(&00)' NOT AVAILABLE
Meaning
The device
- is not generated (correctly) on the local SU (Server Unit),
- is not generated in the guest system having been migrated (SU /390), or
- is generated differently (type, host connector or unit id) in the
guest system having been migrated (SU x86).
(&00): Mnemonic device name
VMS4007
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : YES
VMS4007 DEVICE '(&00)' NOT ASSIGNED TO VIRTUAL MACHINE ((&01),(&02))
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
VMS4008
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4008 DEVICE '(&00)' SWITCHED FROM VIRTUAL MACHINE ((&01),(&02)) TO VIRTUAL MACHINE ((&03),(&04)) (&05)
Meaning
(&00): Mnemonic device name
(&01): Index of the source virtual machine (FROM-VM)
(&02): Name of the source virtual machine (FROM-VM)
(&03): Index of the target virtual machine (TO-VM)
(&04): Name of the target virtual machine (TO-VM).
(&05): Cause:
- Blank: VM2000 administrator command
- "(BY GUEST)": Implicit switch by guest system
VMS4009
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4009 DEVICE '(&00)' REMOVED FROM VIRTUAL MACHINE ((&01),(&02)) (&03)
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): Cause:
- Blank: VM2000 administrator command
- "(BY GUEST)": Implicit remove by guest system
- "(BY SYSADM)": Action of the system administration
- "(BY IPL)": Implicit remove by IPL of guest system
- "(BY RECONF)": Reconfiguration by system administrator
VMS4010
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4010 MAXIMUM NUMBER ((&00)) OF VIRTUAL MACHINES ALLOWED ALREADY REACHED. /(&01) REJECTED
Response
If necessary, terminate a virtual machine.
VMS4011
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4011 REQUESTED MEMORY FOR VIRTUAL MACHINE ((&00),(&01)) IS NOT AVAILABLE. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Correct the operands MEMORY-SIZE and/or LOCATION and reenter the command.
VMS4012
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4012 REQUESTED MEMORY FOR VIRTUAL MACHINE ((&00),(&01)) IS NOT SUFFICIENT. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Please reenter the command with sufficient memory size.
VMS4013
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4013 VM name '(&00)' not available. Reason: (&01)
Meaning
VM names have to be unique on a Server Unit and in an HA cluster.
(&00): VM name which is not available
(&01): Reason:
1 - The VM name is already used by a FOREIGN VM on
the local Server Unit.
2 - The VM name is already used by a FOREIGN VM on
a Server Unit which is in an HA cluster together with
the local Server Unit.
3 - The VM name is already used by a BS2000 VM on
the local Server Unit.
4 - The VM name is already used by a BS2000 VM on
a Server Unit which is in an HA cluster together with
the local Server Unit.
5 - The VM name is already used in the definition of a BS2000 VM
on the local Server Unit.
6 - The VM name is already used in the definition of a BS2000 VM
on a Server Unit which is in an HA cluster together with
the local Server Unit.
7 - The total number of BS2000 and FOREIGN VMs running or defined
on the local Server Unit has reached the allowed maximum.
VMS4014
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4014 Virtual machine ((&00),(&01)) not created due to SVP error
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4015
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4015 VIRTUAL MACHINE ((&00),(&01)) ALREADY INITIALIZED. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4016
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : YES
VMS4016 DEVICE '(&00)' CANNOT BE USED AS VIRTUAL CONSOLE. /(&01) REJECTED FOR VIRTUAL MACHINE ((&02),(&03))
Meaning
The device type code must be '02' or '03'
(&00): Mnemonic device name
(&02): Index of the virtual machine
(&03): Name of the virtual machine.
VMS4017
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4017 IPL DEVICE TYPE ILLEGAL. /(&00) REJECTED FOR VIRTUAL MACHINE ((&01),(&02))
Meaning
Only disks or tapes are allowed as IPL devices.
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
VMS4018
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4018 REQUESTED CPU NOT ASSIGNED TO VIRTUAL MACHINE ((&00),(&01)). /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4019
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4019 SPECIFIED VIRTUAL CPU UNSUITABLE FOR IPL. /(&00) REJECTED FOR VIRTUAL MACHINE ((&01),(&02))
Meaning
The specified virtual CPU is blocked by VM2000 or
it is a spare CPU.
(&00): Command
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
VMS4020
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4020 DEVICE '(&00)' NOT ASSIGNED TO VIRTUAL MACHINE ((&01),(&02)). /(&03) REJECTED
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS4021
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4021 DEVICE '(&00)' IS LAST CONSOLE OR MAIN CONSOLE OF MONITOR SYSTEM. RECONFIGURATION NOT POSSIBLE
Meaning
(&00): Mnemonic device name.
VMS4022
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4022 DEVICE '(&00)' CURRENTLY IN USE AS PUBLIC DEVICE IN MONITOR VM. RECONFIGURATION NOT POSSIBLE
Meaning
(&00): Mnemonic device name.
VMS4023
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4023 THE REQUESTED IPL DEVICE IS NOT AVAILABLE. /(&00) REJECTED
VMS4024
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4024 VIRTUAL MACHINE ((&00),(&01)) TERMINATED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4026
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4026 VIRTUAL CONSOLE ALREADY DEFINED FOR VIRTUAL MACHINE ((&00),(&01)). /(&02) REJECTED FOR DEVICE '(&03)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&03): Mnemonic device name
VMS4027
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4027 NO CONSOLE DEFINED FOR VIRTUAL MACHINE ((&00),(&01)). /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4030
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4030 A VIRTUAL CONSOLE CANNOT BE ASSIGNED TO THE MONITOR VM. /(&00) REJECTED
Meaning
(&00): VM2000 command name.
VMS4031
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4031 DEVICE '(&00)' IS INOP. COMMAND REJECTED FOR VIRTUAL MACHINE ((&01),(&02))
Meaning
The device is inoperable or there are different LUNs connected via
individual channel paths of the disk device.
(&00): Mnemonic device name
(&01): Index of virtual machine
(&02): Name of virtual machine
Response
If the affected device is a disk device that is connected via
multiple fibre channels, please check the zoning and LUN masking
of all respective ports.
VMS4032
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4032 DEVICE '(&00)' CANNOT BE SHARED WITH OTHER VIRTUAL MACHINES
Meaning
(&00): Mnemonic device name
VMS4033
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4033 Maximum number of sharers already reached for device '(&00)'. Command rejected for this device
Meaning
A shared device can only be assigned to at most 16 systems.
(&00): Mnemonic device name
VMS4034
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4034 DEVICE '(&00)' ALREADY ASSIGNED AS SHARED DEVICE
Meaning
A device already assigned as shared device cannot be assigned
exclusively to a VM. If the command /START-VM has been entered,
the IPL unit has to be assigned exclusively to the VM.
(&00): Mnemonic device name
VMS4035
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4035 NO CORRESPONDING DEVICE FOUND
VMS4036
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4036 IPL IN PROGRESS FOR VIRTUAL MACHINE ((&00),(&01))
Meaning
An IPL for the virtual machine has just been initiated by the
SE manager, or the previous IPL has not been terminated properly.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
Response
Please check the state of the virtual machine.
VMS4037
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4037 I/O ERROR DURING BOOTREADING FOR VIRTUAL MACHINE ((&00),(&01)). CC=(&02), CSB=(&03), USB=(&04), SENSE=(&05)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Condition code (CC)
(&03): Channel status byte (CSB)
(&04): Unit status byte (USB)
(&05): Sense bytes.
Response
Check the device status with the help of the information displayed.
VMS4038
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4038 TIMEOUT ERROR AT MICROKERNEL INITIALIZATION OR AT STARTING OF THE IPL CPU. /(&00) REJECTED FOR VIRTUAL MACHINE ((&01),(&02))
Meaning
(&00): Command
(&01): Index of the virtual machine
(&02): Name of the virtual machine.
VMS4039
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4039 DEVICE '(&00)' ASSIGNED TO VIRTUAL MACHINE ((&01),(&02)) (&03)
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): Special type of the device, if defined.
VMS4040
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4040 DEVICE '(&00)' NOT ASSIGNED TO A VIRTUAL MACHINE
Meaning
(&00): Mnemonic device name.
VMS4043
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4043 CPU (&00) NOT IN SYSTEM
Meaning
(&00): Number of the real CPU
Response
Correct the command.
VMS4044
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4044 CPU (&00) ATTACHED
Meaning
(&00): Number of the real CPU
VMS4045
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4045 CPU (&00) DETACHED
Meaning
(&00): Number of the real CPU
VMS4046
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4046 CPU (&00) ALREADY ATTACHED
Meaning
(&00): Number of the real CPU
VMS4047
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4047 CPU (&00) ALREADY DETACHED
Meaning
(&00): Number of the real CPU
VMS4048
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4048 CPU (&00) IS THE LAST AVAILABLE NORMAL CPU. NO RECONFIGURATION POSSIBLE
Meaning
(&00): Number of the real CPU
VMS4049
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4049 Memory Reconfiguration for virtual machine ((&00),(&01)) has been rejected due to a busy device '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
(&02): Mnemonic of the first or only busy device.
Response
If the guest system is in STARTUP, retry the command after SYSTEM READY
of the guest system.
Otherwise, check the I/O-state of the device (DETACH for the device may
be necessary) and try again.
VMS4050
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4050 X2000 RSC activity for virtual machine ((&00),(&01)) could not be stopped. /(&02) rejected
Meaning
"Remote System Call" facility of X2000 did not respond within
a time limit.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
(&02): Command
Response
Retry the command later.
VMS4052
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4052 NO TERMINATION INTERRUPT FOR IPL DEVICE '(&00)'
Meaning
(&00): Mnemonic device name.
VMS4060
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4060 ONLY ONE DEVICE OF TYPE 'VIRTUAL CONSOLE' CAN BE ASSIGNED TO A VIRTUAL MACHINE
VMS4064
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4064 NO CHANNEL PATH AVAILABLE FOR DEVICE '(&00)'. ASSIGNMENT REJECTED
Meaning
(&00): Mnemonic device name.
Response
The channel path must be made available in the monitor system.
VMS4065
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4065 Device '(&00)' added to VM2000 configuration
VMS4066
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4066 Device '(&00)' removed from VM2000 configuration
VMS4067
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4067 HARDWARE RESOURCES EXHAUSTED. DEVICE '(&00)' COULD NOT BE ASSIGNED TO VM ((&01),(&02))
Meaning
The storage capacity for the devices in the harware is exhausted.
Response
Remove possible devices from VMs and retry the command.
VMS4068
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4068 DEVICE '(&00)' ALREADY ASSIGNED TO THE SPECIFIED VM ((&01),(&02))
VMS4069
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4069 DEVICE '(&00)' ALREADY ASSIGNED TO THE TARGET VM ((&01),(&02))
Meaning
The command /SWITCH-VM-DEVICE was not processed for the issued device.
VMS4071
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4071 Invalid memory size or location specified for virtual machine ((&00), (&01)). /(&02) rejected
Meaning
Possible reasons:
- If an address is specified for LOCATION, it has to be a multiple
of 1 MB.
- On an SU x86 it is only permitted to specify multiples
of 2 MB for MEMORY-SIZE, MIN-MEMORY-SIZE, MAX-MEMORY-SIZE and
NEW-MEMORY-SIZE, NEW-MIN-MEMORY-SIZE respectively.
(&00): Index of virtual machine
(&01): Name of virtual machine
(&02): Command
VMS4072
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4072 CPU (&00) is defect. Command rejected
Meaning
(&00): Number of the real CPU
VMS4073
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4073 CPU (&00) not attached due to CPU attribute
Meaning
(&00): Number of the real CPU
VMS4074
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4074 No additional CPU available
VMS4075
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4075 EXTRA-CPU (&00) attached
Meaning
(&00): Number of the real EXTRA-CPU
VMS4077
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4077 EXTRA-CPU (&00) detached
Meaning
(&00): Number of the real EXTRA-CPU
VMS4078
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4078 CPU (&00) NOT DETACHED DUE TO CPU ATTRIBUTE
Meaning
(&00): Number of the real CPU
VMS4079
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4079 No CPU with the specified attribute attached
VMS4080
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4080 DURING IPL THE DEVICE '(&00)' COULD NOT BE RESET
Meaning
During IPL the Hypervisor could not reset one or several devices.
(&00): Mnemonic device name of the first or only concerned device.
Response
If the concerned device is a disk device and the virtual machine does
not have the I/O-reset-privilege, the command /MODIFY-VM-ATTRIBUTES
with the operand IO-RESET=*YES should be issued by the VM2000
administrator before you can repeat the command /START-VM.
Otherwise, contact the service technician.
VMS4081
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4081 /SWITCH-VM-DEVICES FAILED. DEVICE '(&00)' ONLY REMOVED
Meaning
(&00): Mnemonic device name.
Response
Assign the device with /ADD-VM-DEVICE to the new VM.
VMS4082
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4082 WARNING: THE HARD-COPY DEVICE '(&00)' IS NOT ASSIGNED.
Meaning
VM was started without assignment of the hard-copy device.
(&00): Mnemonic device name of the hard-copy device.
Response
Assign the concerned hard-copy device to the VM.
VMS4083
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4083 WARNING: ALL CPUS OF VIRTUAL MACHINE ((&00),(&01)) ARE STOPPED
VMS4084
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4084 I/O CONFIGURATION UPDATE IN PROGRESS. COMMAND REJECTED
Meaning
As long as the I/O configuration update is not completed, a guest system
cannot be started.
Response
Terminate the I/O configuration update and then start the guest system.
VMS4085
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4085 Device '(&00)' still attached in guest system. Device not removed
Meaning
(&00): Mnemonic device name
Response
Retry the command with FORCE=*YES if necessary.
VMS4086
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4086 State of device '(&00)' in guest system unknown. Device not removed
Meaning
(&00): Mnemonic device name
Response
Retry the command with FORCE=*YES if necessary.
VMS4087
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4087 Device '(&00)' remains assigned to VM ((&01),(&02)) until detach in guest system has been done
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS4088
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4088 Device '(&00)' already assigned 'BY GUEST' to VM ((&01),(&02)). Device assigned now 'BY VM-ADMIN'
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS4089
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4089 Device '(&00)' generated as virtual console. Assignment only possible with TYPE=*VC
Meaning
(&00): Mnemonic device name
VMS4091
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4091 MEMORY-RECONFIGURATION FOR VIRTUAL MACHINE ((&00),(&01)) HAS BEEN REJECTED BECAUSE NO APPROPRIATE GUEST SYSTEM IS RUNNING
Meaning
possible causes:
- The guest system is not completely loaded.
- The loaded guest system does not support memory-reconfiguration.
- The requested memory size is not supported by the loaded guest system.
(&00): Index of the virtual machine.
(&01): Name of the virtual machine.
VMS4092
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4092 A MEMORY-RECONFIGURATION ORDER IS STILL BEING PROCESSED; THE REQUEST FOR VIRTUAL MACHINE ((&00),(&01)) HAS BEEN REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4093
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4093 INCORRECT OPERAND VALUE(S) SPECIFIED CONCERNING THE MEMORY-SIZE FOR THE VIRTUAL MACHINE ((&00),(&01))
Meaning
possible causes:
- The total memory size of a VM cannot be smaller than its minimal
memory size.
- The total memory size of a VM cannot be larger than its maximal
memory size.
- The minimal memory size of the VM is too small.
- The maximal memory size of the VM is too large.
- The minimal memory size of a VM cannot be reduced.
- The specified memory size is in contradiction with the selected
function (extend or reduce memory size).
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Reenter the corrected command.
VMS4094
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4094 MEMORY-RECONFIGURATION FOR VIRTUAL MACHINE ((&00),(&01)) HAS BEEN SUCCESSFULLY PROCESSED. CURRENT MEMORY SIZES: (&02) / (&03)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Minimal memory size of the VM in megabytes
(&03): Total memory size of the VM in megabytes
VMS4095
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4095 MEMORY-RECONFIGURATION FOR VIRTUAL MACHINE ((&00),(&01)) HAS BEEN PARTIALLY PROCESSED OR ERRONEOUSLY COMPLETED. CURRENT MEMORY SIZES: (&02) / (&03) / (&04)
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Minimal memory size of the VM in megabytes
(&03): Total memory size of the VM in megabytes
(&04): Memory size used by the guest system in megabytes
VMS4100
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4100 MSCF COORDINATED MOVE NOT SUPPORTED BY GUEST SYSTEM ON VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Where applicable reenter the command without MSCF-COORDINATED=*YES.
VMS4101
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4101 MSCF COORDINATED MOVE REJECTED BY GUEST SYSTEM ON VIRTUAL MACHINE ((&00), (&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Where applicable reenter the command without MSCF-COORDINATED=*YES.
VMS4102
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4102 MSCF COORDINATION NOT CONFIRMED IN TIME BY GUEST SYSTEM ON VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
Where applicable reenter the command without MSCF-COORDINATED=*YES.
VMS4103
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4103 RELEASE OF CLUSTER RECOVERY LOCK NOT CONFIRMED IN TIME BY GUEST SYSTEM ON VIRTUAL MACHINE ((&00),(&01))
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4110
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4110 GLOBAL STORAGE NOT AVAILABLE
Meaning
The hardware does not support Global Storage, therefore it cannot be
assigned to a VM.
VMS4111
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4111 VIRTUAL GLOBAL STORAGE NOT SUPPORTED
Meaning
The firmware does not support virtual global storage and therefore it
cannot be assigned to a VM or real global storage has not been assigned
to the Monitor VM.
VMS4112
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4112 GS-PARTITION (&00) NOT AVAILABLE
Meaning
The GS-Partition is not installed.
(&00): GS-Partition-Identification
Response
Install the GS-Partition with the command /CREATE-GS-PARTITION and
reenter the command.
VMS4113
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4113 GLOBAL STORAGE IS ALREADY ASSIGNED TO VIRTUAL MACHINE ((&00),(&01))
Meaning
An attempt to assign global storage has been done for a virtual machine
for which global storage has already been assigned.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4114
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4114 GLOBAL STORAGE HAS NOT BEEN ASSIGNED TO VIRTUAL MACHINE ((&00),(&01))
Meaning
An attempt to remove global storage has been done for a virtual machine
for which global storage has not been assigned.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
VMS4115
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4115 INVALID GS-OPERAND-VALUE SPECIFIED FOR VIRTUAL MACHINE ((&00),(&01))
Meaning
The GS-operand-value specified in the command /REMOVE-VM-RESOURCES must
be the same as the one specified in the command /ADD-VM-RESOURCES issued
previously.
(&00): Index of the virtual machine
(&01): Name of the virtual machine.
Response
Get the GS-value for this VM with the help of the command
/SHOW-VM-RESOURCES INFORMATION=*GS and reenter the corrected
command.
VMS4116
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4116 A VIRTUAL MACHINE WITH VIRTUAL GLOBAL STORAGE STILL EXISTS
Meaning
Real global storage may be removed from the monitor machine only when
there is no other VM with virtual global storage assigned to it.
Response
Remove assigned virtual global storage and reenter the command.
VMS4117
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4117 GLOBAL STORAGE ALREADY ASSIGNED EXCLUSIVELY TO ANOTHER VM
Meaning
The global storage is already assigned exclusively to a VM, therefore it
cannot be assigned either as exclusive or shared to another VM.
VMS4118
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4118 GLOBAL STORAGE IS NOT EXCLUSIVELY AVAILABLE
Meaning
The global storage is already assigned to a VM and therefore cannot be
assigned exclusively anew.
VMS4120
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4120 VM ALREADY CONNECTED TO GLOBAL STORAGE
Response
Disconnect the global storage in the guest system and reenter the command
or use the operand FORCE=*YES and reenter the command.
VMS4121
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4121 CHANGE OF GS-TYPE NOT ALLOWED
Meaning
The change of GS usage
real GS - virtual GS
shared GS - exclusive GS
mono GS - dual GS
is not allowed.
Response
A change of usage is only possible after creating the VM anew.
VMS4122
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4122 CONNECTION OF GS FAILED.
Meaning
Possible error conditions with real GS:
- Return code from the SVP-Interface (DAPF)
- GS is connected to another cluster.
Possible failure condition with virtual GS:
- The corresponding real GS is not connected.
VMS4123
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4123 GS-Partition (&00) not assignable in Dual-Mode
Meaning
If the Hardware Duplication is not available a Dual-Partition cannot
be assigned.
(&00): GS-Partition-Identification
VMS4124
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4124 REAL GS DETACHED: VIRTUAL GS (&00) REMOVED FROM VIRTUAL MACHINE ((&01), (&02))
Meaning
The GS Partition which is used as virtual GS for a VM is
removed because the real GS is detached.
(&00): GS Partition Identification
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS4143
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4143 Guest system in STARTUP processing. Command rejected
Meaning
During STARTUP processing of the guest system it is not possible
to remove the devices assigned.
Response
Retry command after SYSTEM READY of the guest system
or remove the devices with FORCE=*YES.
VMS4144
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4144 VM ((&00),(&01)) in WAIT STATE. Command rejected
Meaning
For a VM in WAIT STATE, it is not possible to remove the
devices assigned.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
Response
If necessary, resume the VM and retry the command or remove the
devices with FORCE=*YES.
VMS4150
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4150 CPU (&00) could not be attached due to its state
Meaning
(&00): Number of the real CPU.
Response
Contact the service technician.
VMS4151
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4151 CPU (&00) could not be detached due to its state
Meaning
(&00): Number of the real CPU.
Response
Contact the service technician.
VMS4152
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4152 CPU (&00) IS OFFLINE. COMMAND REJECTED
Meaning
(&00): Number of the real CPU that is indicated as non-operational
by X2000
VMS4159
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4159 Device pair specified for the main console is not checked
Meaning
It has not been checked whether the pair of mnemonic device names
specified for the main console corresponds to the combination
output path/input path of a KVP console.
VMS4160
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4160 Device pair specified for the main console does not correspond to a KVP console
Meaning
The pair of mnemonic device names specified for the main console
does not correspond to the combination output path/input path
of a KVP console.
Response
Correct the specification and reenter the command.
VMS4161
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4161 The first device specified for the KVP console does not correspond to an output path
Meaning
The pair of mnemonic device names corresponds to a KVP console
but the output path is not specified first.
Response
Specify a KVP console as a pair of device mnemonic names
in the sequence: (KVP output path,KVP input path).
VMS4162
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4162 No or not enough virtual CPUs available for VM ((&00),(&01))
Meaning
(&00): Index of the virtual machine.
(&01): Name of the virtual machine.
VMS4170
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4170 Switch to indirect I/O failed. Assignment of device '(&00)' rejected
Meaning
Because of intensive I/O with this device, switching to indirect I/O
is currently not possible.
(&00): Mnemonic device name
Response
Retry command later if necessary.
VMS4171
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4171 ASSIGN-BY-GUEST not allowed for virtual consoles. Attribute of device '(&00)' not changed
Meaning
(&00): Mnemonic device name
VMS4172
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4172 Device '(&00)' currently assigned to several sharers. Exclusive usage not possible
Meaning
(&00): Mnemonic device name
VMS4180
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4180 The set of devices specified by the UNITS operand is empty
VMS4190
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4190 Command '/(&01)' not processed for PAV alias device '(&00)'
Meaning
(&00): Mnemonic device name
(&01): VM2000 command name
VMS4191
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4191 PAV base device '(&00)' not assigned to VM ((&01),(&02)). Alias device '(&03)' will be removed
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): Mnemonic device name
VMS4192
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4192 Assignment by VM-ADMIN not allowed for PAV alias devices. Alias device '(&00)' will be removed
Meaning
(&00): Mnemonic device name
VMS4195
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4195 Command '/(&01)' not processed for CRD '(&00)'
Meaning
(&00): Mnemonic device name
(&01): VM2000 command name
VMS4200
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4200 ASSIGNMENT SET '(&00)' NOT INITIALIZED. /(&01) REJECTED
Meaning
(&00): Name of the assignment set
(&01): Command
VMS4201
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4201 ASSIGNMENT SET '(&00)' CREATED
Meaning
(&00): Name of the assignment set
VMS4202
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4202 ASSIGNMENT SET '(&00)' EXISTS ALREADY. COMMAND REJECTED
Meaning
(&00): Name of the assignment set
VMS4203
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4203 NO DEVICE ASSIGNED TO ASSIGNMENT SET '(&00)'
Meaning
(&00): Name of the assignment set
VMS4204
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4204 ASSIGNMENT SET '(&00)' NOT EMPTY. COMMAND REJECTED
Meaning
(&00): Name of the assignment set
Response
All devices assigned to the specified assignment set have to
be reassigned to another or no assignment set by the command
/MODIFY-VM-DEVICE-ATTRIBUTES and the name of the specified
assignment set has to be removed from all VM-related lists of
the privileg ASSIGN-BY-GUEST by the command /MODIFY-VM-ATTRIBUTES.
Afterwards the command can be repeated.
VMS4205
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4205 ASSIGNMENT SET '(&00)' DELETED
Meaning
(&00): Name of the assignment set
VMS4210
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4210 MAXIMUM NUMBER ((&00)) OF ASSIGNMENT SETS ALREADY REACHED. COMMAND REJECTED
Meaning
(&00): Maximum number of assignment sets allowed
VMS4211
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4211 NUMBER OF ASSIGNMENT SETS SPECIFIED EXPLICITLY FOR VM ((&00),(&01)) EXCEEDS ALLOWED MAXIMUM ((&02)).COMMAND REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Maximum number of explicitly specified assignment
sets per virtual machine
VMS4220
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4220 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' ASSIGNED TO VM ((&02),(&03))
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
VMS4221
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4221 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' ASSIGNED TO VM ((&02),(&03)) WITH ERRORS
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
Response
Check the hardware state of the pubset devices that could not
be assigned to the VM and try to assign them individually. Besides,
the assignment of the whole pubset will be retried during the pubset
attachment in BS2000.
VMS4222
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4222 ONLY PUBRES DEVICE '(&00)' ASSIGNED PRELIMINARY TO VM ((&01),(&02))
Meaning
(&00): Mnemonic device name of PUBRES
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
Only the PUBRES device was assigned to the VM. The remaining
devices of the pubset could not be determined yet. Their assignment
will be retried during the pubset attachment in BS2000.
VMS4223
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4223 VM2000 COMMAND '/(&01)' FOR PUBSET SPECIFIED BY PUBRES DEVICE OR CATID '(&00)' REJECTED
Meaning
(&00): Specified mnemonic device name of PUBRES or specified CATID
(&01): Command
VMS4224
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4224 ASSIGNMENT OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' TO VM ((&02),(&03)) WILL BE UPDATED BY SYSTEM
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
Response
The assignment of all pubset devices will be updated as a result
of a pubset reconfiguration (/MODIFY-PUBSET-PROCESSING) or a VM
assignment discrepancy detected during the pubset attachment in
BS2000.
VMS4225
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4225 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' REMOVED FROM VM ((&02),(&03))
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
VMS4226
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4226 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' REMOVED FROM VM ((&02),(&03)) WITH ERRORS
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
Response
Check the hardware state of the pubset devices that could not
be removed from the VM and try to remove them individually
(possibly with FORCE=*YES).
VMS4227
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4227 ASSIGNMENT OF PUBSET DEVICE '(&00)' TO VM ((&01),(&02)) WILL BE CHANGED BY SYSTEM
Meaning
(&00): Mnemonic device name of a volume having been removed from
a pubset
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
The explicit assignment of the specified pubset device will be
changed to the implicit one as a result of a pubset reconfiguration
(/MODIFY-PUBSET-PROCESSING).
VMS4228
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4228 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' SWITCHED FROM VM ((&02),(&03)) TO VM ((&04),(&05))
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the source virtual machine (FROM-VM)
(&03): Name of the source virtual machine (FROM-VM)
(&04): Index of the target virtual machine (TO-VM)
(&05): Name of the target virtual machine (TO-VM)
VMS4229
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4229 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' SWITCHED FROM VM ((&02),(&03)) TO VM ((&04),(&05)) WITH ERRORS
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the source virtual machine (FROM-VM)
(&03): Name of the source virtual machine (FROM-VM)
(&04): Index of the target virtual machine (TO-VM)
(&05): Name of the target virtual machine (TO-VM)
Response
Check the hardware state of the pubset devices that could not be
switched to the VM and try to reassign or remove them individually
(possibly with FORCE=*YES). Besides, the assignment of the whole
pubset will be retried during the pubset attachment in BS2000.
VMS4230
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4230 DEVICE USAGE OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' MODIFIED
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
VMS4231
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4231 DEVICE USAGE OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' MODIFIED WITH ERRORS
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
Response
If necessary, remove the reason of the failure and modify the
device usage of the respective pubset devices individually.
VMS4234
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4234 DEVICE '(&00)' ALREADY ASSIGNED TO VM ((&01),(&02)). DEVICE USAGE MODIFIED BY SYSTEM
Meaning
(&00): Mnemonic device name
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
The specified pubset device was already assigned to the target VM
but its device usage had to be modified to meet the usage required
to the whole pubset (operand TYPE of command /ADD-VM-DEVICES).
VMS4235
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4235 SOME DEVICES OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' REMAIN ASSIGNED TO VM ((&02),(&03)) UNTIL DETACH IN GUEST SYSTEM HAS BEEN DONE
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
VMS4236
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4236 PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' NOT ASSIGNED TO VM ((&02),(&03))
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
(&02): Index of the virtual machine
(&03): Name of the virtual machine
VMS4237
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4237 ONLY PUBRES DEVICE '(&00)' REMOVED FROM VM ((&01),(&02))
Meaning
Only the PUBRES device was removed from the VM. The remaining
devices of the pubset could not be determined yet.
(&00): Mnemonic device name of PUBRES
(&01): Index of the virtual machine
(&02): Name of the virtual machine
Response
Retry the command later on if necessary.
VMS4238
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4238 ONLY INFORMATION ABOUT PUBRES DEVICE '(&00)' AVAILABLE
Meaning
Only the information about the PUBRES device was displayed. The
remaining devices of the pubset could not be determined yet.
(&00): Mnemonic device name of PUBRES
Response
Retry the command later on if necessary.
VMS4240
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4240 DEVICE ATTRIBUTES OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' MODIFIED
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
VMS4241
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4241 DEVICE ATTRIBUTES OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' MODIFIED WITH ERRORS
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
VMS4242
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4242 ONLY DEVICE ATTRIBUTES OF PUBRES DEVICE '(&00)' MODIFIED
Meaning
(&00): Mnemonic device name of PUBRES
Response
Only the device attributes of the PUBRES device were modified. The
remaining devices of the pubset could not be determined yet. Their
modification will be retried during the pubset attachment in BS2000.
VMS4244
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4244 DEVICE ATTRIBUTES OF PUBSET '(&01)' WITH PUBRES DEVICE '(&00)' WILL BE UPDATED BY SYSTEM
Meaning
(&00): Mnemonic device name of PUBRES
(&01): CATID found on PUBRES
Response
The device attributes of all pubset devices will be updated as a
result of a pubset reconfiguration (/MODIFY-PUBSET-PROCESSING) or
a device attribute discrepancy (between a pubset device and the
corresponding PUBRES device) detected during the pubset attachment
in BS2000.
VMS4245
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4245 DEVICE ATTRIBUTES OF PUBSET DEVICE '(&00)' SET TO DEFAULT VALUES BY SYSTEM
Meaning
(&00): Mnemonic device name
Response
The device attributes of the specified pubset device were set to
the default values as a result of device attribute discrepancy
(between non-default values of the specified pubset device and
default values of the corresponding PUBRES device) detected during
a pubset reconfiguration (/MODIFY-PUBSET-PROCESSING) or during the
the pubset attachment in BS2000.
VMS4250
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4250 DEVICE '(&00)' IS NOT PUBRES DEVICE
Meaning
(&00): Mnemonic device name
VMS4251
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4251 DEVICE LIST OF PUBSET SPECIFIED BY PUBRES DEVICE OR CATID '(&00)' IS INCONSISTENT
Meaning
(&00): Specified mnemonic device name of PUBRES or specified CATID
VMS4252
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4252 DEVICE LIST OF PUBSET SPECIFIED BY PUBRES DEVICE OR CATID '(&00)' CANNOT BE DETERMINED. REASON: (&01)
Meaning
(&00): Specified mnemonic device name of PUBRES or specified CATID
(&01): Reason for failure: IO-ERROR or TIMEOUT or INTERNAL
VMS4253
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4253 PUBRES DEVICE OF PUBSET SPECIFIED BY CATID '(&00)' CANNOT BE DETERMINED. REASON: (&01)
Meaning
(&00): Specified CATID
(&01): Error code reported by $STAM in the monitor system:
NFND MRSCAT entry cannot be found
CINV CATID invalid
NINI MRSCAT not initialized
INTE Internal error
NPUB Name of PUBRES device not in MRSCAT
CINC CATID inconsistent (specified CATID different from the
CATID obtained from the PUBRES device determined by
MRSCAT)
Response
Check and update MRSCAT entry in the monitor system (!) or
specify the pubset by its PUBRES mn.
VMS4270
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4270 No EXTRA-CPU in the configuration
VMS4340
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4340 Opening of MONJV rejected by subsystem JV (JVS(&00)). /(&01) rejected
Meaning
(&00): JV return code
(&01): Command
Response
The cause of the JV error message can be detected with
/HELP-MSG-INFORMATION JVS(&00).
VMS4342
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4342 MONJV '(&01)' could not be updated. Reason: JVS(&00)
Meaning
(&00): JV return code
(&01): Name of the MONJV
Response
The cause of the JV error message can be detected with
/HELP-MSG-INFORMATION JVS(&00).
VMS4343
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4343 Catalog '(&00)' not accessible. MONJV could not be updated
Meaning
(&00): Catalog identifier
Response
The corresponding pubset should be imported.
VMS4344
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4344 Monitoring by MONJV '(&00)' is stopped
Meaning
The correctness of the JV content is no longer guaranteed
because the MONJV protection has been lifted previously.
(&00): Name of the MONJV
VMS4400
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4400 VM GROUP '(&00)' NOT INITIALIZED. /(&01) REJECTED
Meaning
(&00): Name of the VM group
(&01): Command
VMS4401
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4401 VM GROUP '(&00)' CREATED
Meaning
(&00): Name of the VM group
VMS4402
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4402 VM GROUP '(&00)' EXISTS ALREADY. COMMAND REJECTED
Meaning
(&00): Name of the VM group
VMS4403
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4403 VM GROUP '(&00)' IS EMPTY
Meaning
(&00): Name of the VM group
VMS4404
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4404 VM GROUP '(&00)' NOT EMPTY. COMMAND REJECTED
Meaning
(&00): Name of the VM group
Response
The members of the VM group have to be removed from the group
with the command /REMOVE-VM-FROM-VM-GROUP. After this the command
could be repeated.
VMS4405
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4405 VM GROUP '(&00)' DELETED
Meaning
(&00): Name of the VM group
VMS4410
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4410 MAXIMUM NUMBER ((&00)) OF VM GROUPS ALREADY REACHED. /(&01) REJECTED
Meaning
(&00): Allowed maximum number of VM groups
(&01): Command
Response
Where appropriate remove all virtual machines from a VM group and
then delete this VM group.
VMS4411
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4411 NO VM GROUP INITIALIZED
VMS4422
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4422 VM GROUP '(&00)' NOT ASSIGNED TO CPU POOL '(&01)'. /(&02) REJECTED
Meaning
The virtual machine has to be assigned to the same
CPU pool as the VM group.
(&00): Name of the VM group
(&01): Name of the CPU pool
(&02): Command
VMS4424
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4424 VIRTUAL MACHINE ((&00),(&01)) ALREADY ASSIGNED TO A VM GROUP
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4425
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4425 VIRTUAL MACHINE ((&00),(&01)) ASSIGNED TO VM GROUP '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the VM group
VMS4427
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4427 VIRTUAL MACHINE ((&00),(&01)) NOT ASSIGNED TO VM GROUP '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the VM group
VMS4428
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4428 VIRTUAL MACHINE ((&00),(&01)) NOT ASSIGNED TO ANY VM GROUP
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4429
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4429 VIRTUAL MACHINE ((&00),(&01)) REMOVED FROM VM GROUP '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the VM group
VMS4450
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4450 CPU-QUOTA OF VIRTUAL MACHINE ((&00),(&01)) HAS TO BE SPECIFIED VIA MEMBER-CPU-QUOTA. /(&02) REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Command
Response
If a virtual machine is a member of a VM group CPU-QUOTA has to
be specified via the sub-operand MEMBER-CPU-QUOTA to determine the
virtual machine's portion of the CPU-QUOTA of the VM group.
VMS4503
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4503 Resources for command processing not yet totally initialized. Command rejected
Meaning
VM2000 commands cannot be entered before VM2000 READY has been displayed.
Response
Reenter the command after VM2000 READY has been displayed.
VMS4504
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4504 MONITOR MEMORY SHORTAGE. VM2000 COMMAND REJECTED
Meaning
Due to a shortage of memory, the VM2000 command cannot be processed.
Response
Check the system state and retry later, if necessary.
VMS4505
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4505 Command '/(&00)' temporarily not executable
Response
Retry after a short time of waiting!
VMS4508
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4508 INTERNAL ERROR '(&00)' DURING COMMAND PROCESSING
Meaning
(&00): Error code
Response
Contact the system administrator
VMS4509
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4509 MEMORY SHORTAGE. THE RUNTIME-TRACE-BUFFER COULD NOT BE ALLOCATED
VMS4510
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4510 AUTOMATIC VM2000-DUMP INITIATED BY VIRTUAL MACHINE ((&00),(&01))
Meaning
A virtual machine has initiated an automatic VM2000-DUMP because
of a system crash or need of diagnosis information.
Send the file containing the VM2000-DUMP together with other diagnosis
data to the support center.
(&00): Index of the virtual machine; 0 means the hypervisor
(&01): Name of the virtual machine or *HYPERVISOR
VMS4511
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4511 AUTOMATIC VM2000-DUMP CANNOT BE CREATED. VMDUMP NOT INSTALLED
Meaning
A VM tried to create an automatic VM2000-DUMP. This failed because
of incorrect installation of the release unit VM2000-UTIL.
Response
Check installation of the release unit VM2000-UTIL.
VMS4512
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4512 AUTOMATIC VM2000-DUMP FOR VM ((&00),(&01)) COULD NOT BE TAKEN. REPLY (EOT); BEFORE, TAKE A MANUAL VM2000-DUMP IF NEEDED
Meaning
(&00): Index of the virtual machine; 0 means the hypervisor
(&01): Name of the virtual machine or *HYPERVISOR
VMS4513
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4513 HYPERVISOR MEMORY EXHAUSTED. COMMAND REJECTED
Response
Please check the specification of the hypervisor main memory size
in the startup parameter file of BS2000 OSD/BC.
If there is specified HYPERVISOR-SIZE=*BY-SYSTEM (default value),
please take a VMDUMP and contact the service.
If there is specified an explicit value for the hypervisor main
memory size, this value may be too small. Possibly you can free
some space for the hypervisor by deleting a VM (of less importance).
VMS4514
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4514 WARNING: HYPERVISOR MEMORY EXHAUSTED
Meaning
The hypervisor cannot process its internal orders because its memory
is exhausted. For this reason, the smooth operating of the guest system
can be hindered.
Response
Please check the specification of the hypervisor main memory size
in the startup parameter file of BS2000 OSD/BC.
If there is specified HYPERVISOR-SIZE=*BY-SYSTEM (default value),
please take a VMDUMP and contact the service.
If there is specified an explicit value for the hypervisor main
memory size, this value may be too small. Possibly you can free
some space for the hypervisor by deleting a VM (of less importance).
VMS4515
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4515 Warning: X2000 RSC facility reset by VM2000
Meaning
The "Remote System Call" facility of X2000 was reset because of its
busy state. The VM2000 session continues normally but some RSC functions
may be not available any longer.
VMS4551
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4551 DYNAMIC RECONFIGURATION WITH FUNCTION '(&00)' STARTED
Meaning
(&00): Function ADD or REMOVE
VMS4552
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4552 DYNAMIC RECONFIGURATION WITH FUNCTION '(&00)' FINISHED
Meaning
(&00): Function ADD or REMOVE
VMS4553
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4553 CPU (&00) SET ONLINE BY DR
Meaning
(&00): Number of the real CPU that has become operational by DR
VMS4554
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4554 CPU (&00) SET OFFLINE BY DR
Meaning
(&00): Number of the real CPU that has become non-operational by DR
VMS4555
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4555 CPU (&00) CANNOT BE SET OFFLINE BY DR
Meaning
(&00): Number of the real CPU that is to become non-operational by DR
Response
Detach all extra CPUs before starting the dynamic reconfiguration or
check the reason of the failure in a preceding VM2000 message
VMS4556
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4556 DEVICE '(&00)' CANNOT BE DEACTIVATED BY DR
Meaning
(&00): Mnemonic device name of the I/O device that is to be
deactivated by DR
Response
Remove the (shared) device from all virtual machines manually
before starting the dynamic reconfiguration or
check the reason of the failure in a preceding VM2000 message
VMS4557
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4557 TOTAL MAIN MEMORY FOR VM2000 EXTENDED TO (&00) MB
Meaning
(&00): New size of VM2000 memory in megabytes
VMS4558
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4558 TOTAL MAIN MEMORY FOR VM2000 REDUCED TO (&00) MB
Meaning
(&00): New size of VM2000 memory in megabytes
VMS4559
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4559 TOTAL MAIN MEMORY FOR VM2000 CANNOT BE REDUCED TO (&00) MB
Meaning
(&00): Desired size of VM2000 memory in megabytes
Response
Release VM2000 main memory at its end before starting the dynamic
reconfiguration
VMS4560
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4560 MINIMAL MEMORY SIZE FOR VM2000 CHANGED TO (&00) MB
Meaning
(&00): New size of VM2000 minimal memory (for DR) in megabytes
VMS4561
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4561 MINIMAL MEMORY SIZE FOR VM2000 CANNOT BE CHANGED TO (&00) MB
Meaning
(&00): Desired size of VM2000 minimal memory (for DR) in megabytes
VMS4562
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4562 DYNAMIC RECONFIGURATION WITH FUNCTION '(&00)' CANNOT BE STARTED DUE TO VM ((&01),(&02)). REASON: (&03)
Meaning
(&00): Function ADD or REMOVE
(&01): Index of the virtual machine
(&02): Name of the virtual machine
(&03): Reason for rejection: DR-REJECT or TIMEOUT or STARTUP or
WAIT STATE
VMS4563
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4563 DEVICE '(&00)' ACTIVATED BY DR
Meaning
(&00): Mnemonic device name
VMS4564
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4564 DEVICE '(&00)' DEACTIVATED BY DR
Meaning
(&00): Mnemonic device name
VMS4600
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4600 CPU POOL '(&00)' NOT INITIALIZED. /(&01) REJECTED
Meaning
(&00): Name of the CPU pool
(&01): Command
VMS4601
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4601 CPU POOL '(&00)' CREATED
Meaning
(&00): Name of the CPU pool
VMS4602
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4602 CPU POOL '(&00)' EXISTS ALREADY. COMMAND REJECTED
Meaning
(&00): Name of the CPU pool
VMS4603
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4603 NO CPU ASSIGNED TO CPU POOL '(&00)'
Meaning
(&00): Name of the CPU pool
VMS4604
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4604 CPU ASSIGNED TO CPU POOL '(&00)'. COMMAND REJECTED
Meaning
(&00): Name of the CPU pool
Response
All CPUs assigned to the specified CPU pool have to be assigned
to other CPU pools by the command /SWITCH-VM-CPU.
Afterwards the command can be repeated.
VMS4605
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4605 CPU POOL '(&00)' DELETED
Meaning
(&00): Name of the CPU pool
VMS4606
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4606 SWITCH OF CPU '(&00)' FROM CPU POOL '(&01)' TO CPU POOL '(&02)' REJECTED. COMMAND ABORTED
Meaning
A grave error (e.g. CPU failure) has occured in the source CPU pool
during the switching of CPUs.
(&00): CPU identification
(&01): Identification of the source CPU pool
(&02): Identification of the target CPU pool
VMS4607
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4607 CPU '(&00)' NOT ASSIGNED TO CPU POOL '(&01)'
Meaning
(&00): CPU identification
(&01): Identification of the CPU pool
VMS4608
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4608 CPU '(&00)' SWITCHED FROM CPU POOL '(&01)' TO CPU POOL '(&02)'
Meaning
(&00): CPU identification
(&01): Identification of the source CPU pool
(&02): Identification of the target CPU pool
VMS4609
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4609 MULTIPLE CPU POOLS EXIST. /(&00) REJECTED
Meaning
Besides the standard CPU pool there exists another CPU pool.
The VM2000 administrator has to specify the CPU pool by name
(or *STDPOOL).
(&00): Command
VMS4610
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4610 MAXIMUM NUMBER ((&00)) OF CPU POOLS ALLOWED ALREADY REACHED. COMMAND REJECTED
Meaning
(&00): Maximum number of CPU pools allowed
VMS4611
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4611 SELECTED CPUS NOT AVAILABLE IN CPU POOL '(&00)'. /(&01) REJECTED
Meaning
(&00): Identification of the CPU pool
(&01): Command
VMS4612
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4612 INSUFFICIENT NUMBER OF ATTACHED CPUS IN CPU POOL '(&00)'. /(&01) REJECTED
Meaning
- The number of attached virtual CPUs of a virtual machine,
which is in state RUNNING or IN-HOLD and which is or should be
assigned to the CPU pool, is too great compared to the number of
attached real CPUs of the CPU pool.
- On an SU x86 there has to be at least one attached real
CPU in a CPU pool to which a virtual machine is assigned.
- There is no attached real CPU in the CPU pool. A virtual machine
assigned to this CPU pool cannot be started.
(&00): Identification of the CPU pool
(&01): Command
VMS4613
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4613 NO VIRTUAL MACHINE ASSIGNED TO CPU POOL '(&00)'
Meaning
(&00): Identification of the CPU pool
VMS4614
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4614 VIRTUAL MACHINE ASSIGNED TO CPU POOL '(&00)'. COMMAND REJECTED
Meaning
(&00): Name of the CPU pool
Response
All virtual machines assigned to the specified CPU pool have to be
assigned to other CPU pools by the command /ASSIGN-VM-TO-CPU-POOL.
Afterwards the command can be repeated.
VMS4615
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4615 VIRTUAL MACHINE ((&00),(&01)) ASSIGNED TO CPU POOL '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the CPU pool
VMS4616
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4616 VIRTUAL MACHINE ((&00),(&01)) ALREADY ASSIGNED TO CPU POOL '(&02)'. COMMAND REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the CPU pool
Response
If the virtual machine should get another value for CPU-QUOTA
the command /MODIFY-VM-ATTRIBUTES has to be used.
VMS4617
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4617 CPU '(&00)' IS LAST ATTACHED CPU OF ACTIVE CPU POOL '(&01)'. COMMAND REJECTED
Meaning
A CPU pool to which a started VM is assigned to has to contain
at least one attached CPU.
(&00): CPU identification
(&01): Identification of the CPU pool
VMS4618
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4618 CPU POOL ASSIGNMENT OF VIRTUAL MACHINE ((&00),(&01)) CHANGED FROM CPU POOL '(&02)' TO CPU POOL '(&03)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the source CPU pool
(&03): Identification of the target CPU pool
VMS4619
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4619 VIRTUAL MACHINE ((&00),(&01)) REMOVED FROM CPU POOL '(&02)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the CPU pool
VMS4620
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4620 IMPLICIT ATTACH-DEVICE FOR VIRTUAL CPUS ON VIRTUAL MACHINE ((&00),(&01)) STARTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4621
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4621 IMPLICIT DETACH-DEVICE FOR VIRTUAL CPUS ON VIRTUAL MACHINE ((&00),(&01)) STARTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4622
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4622 VIRTUAL MACHINE ((&00),(&01)) ASSIGNED TO VM GROUP '(&02)'. COMMAND REJECTED
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Name of the VM group
Response
A virtual machine which is member of a VM group can only be assigned
to another CPU pool by assigning the whole VM group to this CPU pool.
VMS4623
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4623 NO VM GROUP ASSIGNED TO CPU POOL '(&00)'
Meaning
(&00): Name of the CPU pool
VMS4624
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4624 VM GROUP ASSIGNED TO CPU POOL '(&00)'. COMMAND REJECTED
Meaning
(&00): Name of the CPU pool
Response
All VM groups assigned to the specified CPU pool have to
be assigned to other CPU pools by the command
/ASSIGN-VM-GROUP-TO-CPU-POOL. Afterwards the command can be
repeated.
VMS4625
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : YES
VMS4625 VM GROUP '(&00)' ASSIGNED TO CPU POOL '(&01)'
Meaning
(&00): Name of the VM group
(&01): Name of the CPU pool
VMS4626
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4626 VM GROUP '(&00)' ALREADY ASSIGNED TO CPU POOL '(&01)'. COMMAND REJECTED
Meaning
(&00): Name of the VM group
(&01): Name of the CPU pool
Response
If the VM group should get another value for CPU-QUOTA
the command /MODIFY-VM-GROUP-ATTRIBUTES has to be used.
VMS4627
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4627 CPU POOL ASSIGNMENT OF VM GROUP '(&00)' CHANGED FROM CPU POOL '(&01)' TO CPU POOL '(&02)'
Meaning
(&00): Name of VM group
(&01): Identification of the source CPU pool
(&02): Identification of the target CPU pool
VMS4628
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4628 CPU-ID '(&00)' BELONGS TO SPARE CPU. /(&01) REJECTED
Meaning
Spare CPUs are not assigned to any CPU pool.
(&00): CPU identification
(&01): Command
VMS4629
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : YES
VMS4629 VM GROUP '(&00)' REMOVED FROM CPU POOL '(&01)'
Meaning
(&00): Name of the VM group
(&01): Name of the CPU pool
VMS4701
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4701 INTERNAL ERROR IN THE VIRTUAL MACHINE SYSTEM. DIAGNOSTIC INFORMATION (SYSTEMDUMP OR SOFTWARE LOGGING ENTRY) HAS BEEN GENERATED
Response
Contact the system administrator.
VMS4800
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4800 Current VM2000 configuration saved in file '(&00)'
Meaning
(&00): Name of the generated configuration file
VMS4801
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4801 VM2000 configuration restored from file '(&00)'
Meaning
(&00): Name of the configuration file
VMS4802
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4802 Restore of VM2000 configuration from file '(&00)' only partially processed
Meaning
For each configuration component, which could not be restored,
a message VMS4803 was issued.
(&00): Name of the configuration file
VMS4803
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4803 Reconfiguration of (&00) '(&01)' has been partially processed or erroneously completed. Processing of /RESTORE-VM-CONFIGURATION continues
Meaning
(&00): Type of configuration component:
CPU-POOL, REAL-CPU, VM-GROUP, ASSIGNMENT-SET, VM or DEVICE
(&01): Specification of the component of which reconfiguration has been
partially processed or erroneously completed.
VMS4810
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4810 VM2000 version (&00) too old
Meaning
(&00): Version of running VM2000 subsystem
VMS4811
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4811 Main memory size (&00) too small. Processing of /RESTORE-VM-CONFIGURATION continues
Meaning
(&00): Current main memory size
VMS4812
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4812 Current number of the real, operational (&00)-CPUs too small
Meaning
(&00): CPU attribute: NORMAL or EXTRA
VMS4813
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4813 Current number of the real, operational (&00)-CPUs too small. Processing of /RESTORE-VM-CONFIGURATION continues
Meaning
(&00): CPU attribute: NORMAL or EXTRA
VMS4814
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4814 At the restore of the VM2000 configuration from file '(&00)' an Extra-CPU will be attached
Meaning
(&00): Name of the configuration file
VMS4816
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4816 Unfit configuration of Monitor VM ((&00),(&01)). Processing of /RESTORE-VM-CONFIGURATION continues
Meaning
Possible reasons:
- In the saved configuration, the VM index belongs to a Guest VM
but not to the Monitor VM.
- In the saved configuration, the VM name is used for a Guest VM.
- The location of the Monitor VM prevents the creation of a Guest VM.
- The main memory size is greater than the saved main memory size of
the Monitor VM.
- On an SU x86, the maximum main memory size is greater than the
corresponding saved size of the Monitor VM.
(&00): Index of the Monitor VM
(&01): Name of the Monitor VM
VMS4817
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4817 Configuration of persistent VM ((&00),(&01)) is not saved. Processing of /SAVE-VM-CONFIGURATION continues
Meaning
The configuration data of a persistent VM is permanently available
(i.e. also after the restart of the Server Unit) and does not need
to be included in the backup of the VM2000 configuration.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4818
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4818 Warnings occured at the saving of the VM2000 configuration
Response
Please consider preceding VM2000 messages VMS4814 and VMS4817.
VMS4830
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4830 Virtual machine ((&00),(&01)) has not yet reached SYSTEM READY
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4831
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4831 Memory reconfiguration of virtual machine ((&00),(&01)) in process
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS4832
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4832 Device reconfiguration during the processing of /(&00)
Meaning
(&00): VM2000 command name
Response
Please retry the command.
VMS4840
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4840 Creation of configuration file '(&00)' rejected. Reason: DMS(&01)
Meaning
(&00): Name of the configuration file
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS4841
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4841 Configuration file '(&00)' could not be written. Reason: DMS(&01)
Meaning
(&00): Name of the configuration file
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS4842
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4842 Configuration file '(&00)' could not be read. Reason: DMS(&01)
Meaning
(&00): Name of the configuration file
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS4843
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4843 Incomplete configuration file '(&00)' could not be deleted. Reason: DMS(&01)
Meaning
(&00): Name of the configuration file
(&01): DMS return code
Response
The cause of the DMS error message can be detected with
/HELP-MSG-INFORMATION DMS(&01).
VMS4844
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4844 Missing record '(&01)' in configuration file '(&00)'
Meaning
The record is mandatory. It is missing or not at the expected location.
(&00): Name of the configuration file
(&01): Specification of the mandatory record
VMS4845
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4845 Missing record with tag '(&01)' for (&02) '(&03)' in configuration file '(&00)'
Meaning
The record with the tag is mandatory for the component.
It is missing or not at the expected location.
(&00): Name of the configuration file
(&01): Tag of mandatory record for the specified component
(&02): Type of configuration component:
VM2000, REAL-CPU, VM-GROUP, VM or DEVICE
(&03): Specification of configuration component
VMS4846
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4846 (&01) '(&02)' is missing in configuration file '(&00)'
Meaning
The component is referenced in the configuration file,
although it is not defined there.
(&00): Name of the configuration file
(&01): Type of configuration component:
CPU-POOL, VM-GROUP, ASSIGNMENT-SET or VM WITH (MONITOR-)VM-INDEX
(&02): Specification of configuration component
VMS4847
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4847 Erroneous data record '(&01)' in configuration file '(&00)'
Meaning
Possible reasons:
- Erroneous start or end tag
- Start or end tag in higher level is missing
- The value between the start and the end tag breaches its
required range.
(&00): Name of the configuration file
(&01): Erroneous data record
VMS4848
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4848 (&01) '(&02)' in configuration file '(&00)' erroneous
Meaning
The records of the specified configuration component do not fit
together.
(&00): Name of the configuration file
(&01): Type of configuration component:
VM2000, REAL-CPU, VM-GROUP, VM or DEVICE
(&02): Specification of configuration component
VMS4900
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4900 Performance quota of VM2000 deceleration feature changed to (&00)
Meaning
(&00): New value of performance quota in percent
VMS4901
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS4901 VM2000 deceleration feature not activated. Command rejected
Meaning
The VM2000 deceleration feature must be activated by the
startup parameter service.
VMS4910
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4910 Check of disk configuration started
VMS4911
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 70
Warranty : NO
VMS4911 Check of disk configuration already started
VMS4912
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS4912 Check of disk configuration completed
VMS5000
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5000 VM2000-SPECIFIC HARDWARE/FIRMWARE COMPONENTS NOT AVAILABLE. ((&00))
Meaning
(&00): Firmware components not available.
VMS5001
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5001 DIAGNOSE INSTRUCTION FAILED. VM2000 STARTUP CONTINUES WITHOUT THE GLOBAL STORAGE FEATURE
VMS5002
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5002 DIAGNOSE INSTRUCTION FAILED. VM2000 STARTUP ABORTED
VMS5003
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5003 PHYSICAL MEMORY SIZE TOO SMALL FOR VM2000. MINIMUM SIZE: (&00) MEGABYTES. STARTUP ABORTED. GENERATE A NEW SYSTEM
Meaning
(&00): Minimum value of megabytes for the physical memory space.
VMS5004
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5004 EVM-FIRMWARE NOT AVAILABLE. VM2000 STARTUP ABORTED
VMS5005
Destination: CONSOLE Routing code: 9 Weight: 98
Warranty : NO
VMS5005 ENTER VM2000 HYPERVISOR FILE NAME. REPLY (<FILE NAME>; EOT(USE STANDARD FILE))
Meaning
In conjunction with a dialog startup this message is displayed to ask for
the file name of the VM2000 hypervisor.
VMS5006
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5006 WRONG VERSION OF LOADED HYPERVISOR; VM2000 STARTUP ABORTED
Meaning
The Version of the loaded Hypervisor is different from the version
specified in the Startup parameter service or is different from the
default version.
VMS5007
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5007 STARTUP ABORTED DUE TO INTERNAL INCONSISTENCY. TAKE SLED
VMS5008
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5008 THE VM2000 HYPERVISOR AND MONITOR VM VERSIONS ARE INCOMPATIBLE. STARTUP ABORTED
Response
Link either a new hypervisor or a new monitor system.
VMS5010
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5010 DMS ERROR CODE '(&00)'. VM2000 CONFIGURATION FILE NOT ACCESSIBLE
Meaning
The cause of the DMS error code can be detected with /HELP-MSG DMS(&00).
VMS5011
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5011 THE ATTRIBUTES OF THE VM2000 CONFIGURATION FILE DO NOT CORRESPOND TO THE REQUIRED FILE ATTRIBUTES. INPUT IGNORED
Meaning
The configuration file
- is not a SAM-file,
- does not have BLOCKSIZE (STD,1), or
- is an empty file.
VMS5012
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5012 INCONSISTENCY WITHIN THE VM2000 CONFIGURATION FILE. COMMAND PROCESSING ABORTED
Meaning
The file could not be read.
Response
Issue the commands which have not been processed at the console and/or
create a new VM2000 configuration file.
VMS5013
Destination: CONSOLE Routing code: 9 Weight: 98
Warranty : NO
VMS5013 ILLEGAL REPLY
Meaning
None of the possible answers to VMS5005 or VMS5027 has been given.
VMS5014
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5014 FILE '(&00)' IS USED AS VM2000 CONFIGURATION FILE
Meaning
(&00): File name.
VMS5015
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5015 VM2000 HYPERVISOR LOADED FROM FILE '(&00)'
Meaning
(&00): File name.
VMS5016
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5016 TOTAL MAIN MEMORY FOR VM2000: (&00) MB; MONITOR VM SIZE: (&01) MB; HYPERVISOR SIZE: (&02) MB
VMS5017
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5017 THE HYPERVISOR LOAD MODULE HAS AN INVALID FORMAT OR A WRONG FILE NAME
Response
Contact the system administrator.
VMS5018
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5018 HYPERVISOR FILE NAME NOT CATALOGED
Response
Correct the input or create a hypervisor file.
VMS5020
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5020 STARTUP OF THE MONITOR SYSTEM IN (&00) MODE
Meaning
(&00): Multiprocessor mode of the monitor system
VMS5021
Destination: CONSOLE Routing code: 9 Weight: 98
Warranty : NO
VMS5021 ISSUE VM2000 COMMAND (MAX. 70 CHARACTERS) OR 'END'. REPLY (DESIRED INPUT; EOT=END)
VMS5022
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5022 INVALID VALUE OF OPERAND (&00) IN COMMAND /CREATE-VM FOR MONITOR VM; DEFAULT VALUE (&01) TAKEN
Meaning
The command was either issued at the console or was read
from the configuration file.
(&00): Operand name.
(&01): Operand default value.
VMS5023
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5023 DEFAULT VALUES USED FOR THE MONITOR VM
Meaning
Because no valid /CREATE-VM has been specified for the Monitor VM
default values have been used.
Possible default values being used:
- VM-NAME = VM0001
- MEMORY-SIZE = 512
- CPU-QUOTA = 14
- MAX-CPU-UTILIZATION = 100
- PROCESSOR = *MAXIMUM
VMS5024
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5024 OPERAND NOT PERMITTED FOR THE MONITOR VM. 'ADMIN-PRIVILEGES=STD' IS SET
Meaning
The operand ADMIN-PRIVILEGES=MAX is not permitted in the command
/CREATE-VM.
VMS5026
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5026 I/O ERROR WHILE LOADING THE HYPERVISOR LINK MODULE
Response
Correct the input or take SLED.
VMS5027
Destination: CONSOLE Routing code: 9 Weight: 98
Warranty : NO
VMS5027 SPECIFY VM2000 CONFIGURATION FILE NAME. REPLY (EOT(USE STANDARD FILE); FN=<FILE NAME>(,VOL=<VSN>); CONS(CONSOLE CMD INPUT); END(END OF INPUT))
Meaning
Possible replies are:
- P.FN=<filename>(,VOL=<vsn>): The file <filename> on a public volume
set or on a private disk with the volume
serial number <vsn> is read
- P.CONS : VM2000 commands are to be issued from
console
- P.END : End of input
- P.EOT : Standard file name
VMS5028
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5028 VIRTUAL CONSOLES ARE NOT PERMITTED FOR THE MONITOR VM. /ADD-VM-DEVICES REJECTED
Meaning
Command /ADD-VM-DEVICES specified during startup or in the
configuration file has not been processed due to the TYPE=VC operand.
Response
Allocate the appropriate device after SYSTEM READY.
VMS5029
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5029 INVALID DEVICE '(&00)'. DEVICE IGNORED
Meaning
(&00): Mnemonic device name.
VMS5030
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5030 COMMAND NOT PERMITTED DURING VM2000 STARTUP. /(&00) IGNORED
Meaning
Only the commands /CREATE-VM, /ADD-VM-DEVICES and /ADD-VM-RESOURCES are
allowed. The next command will be read.
VMS5031
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5031 VM2000 COMMAND '/(&00)' REJECTED BECAUSE OF ERRONEOUS OR MISSING OPERAND
VMS5032
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5032 REPLY TOO LONG
Meaning
The reply is limited to 70 characters.
VMS5033
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5033 CPU QUOTA OF THE MONITOR SYSTEM HAS BEEN CORRECTED TO (&00)
Meaning
The value of the operand CPU-QUOTA in the command /CREATE-VM is invalid.
Instead, the value (&00) displayed in the message has been used.
VMS5034
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5034 Device '(&00)' cannot be assigned. Error cause: condition code: (&01)
Meaning
Error during assignment of device (&00).
(&00) : Mnemonic device name
(&01) : Condition code
VMS5036
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5036 MAX-CPU-UTILIZATION OF THE MONITOR SYSTEM HAS BEEN CORRECTED TO (&00)
Meaning
The value of the operand MAX-CPU-UTILIZATION in the command /CREATE-VM
is invalid. Instead, the value (&00) displayed in the message has been
used.
(&00): New, corrected value
VMS5037
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5037 REQUESTED MEMORY SIZE FOR THE MONITOR VM IS INCORRECT. VALUE CORRECTED TO: (&00) MB
Meaning
Possible reasons:
1.) The requested memory size (together with the Hypervisor
size) exceeds real memory size. The default value is used
instead of the specified value.
2.) The requested minimum memory size for the Monitor VM
exceeds its memory size. The default value of minimum
memory size is used instead of the specified value.
VMS5038
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5038 REQUESTED MEMORY SIZE FOR MONITOR VM IS TOO SMALL. DEFAULT VALUE USED: (&00) MB
Meaning
The requested (minimum) memory size for the Monitor VM is
less than the permitted minimum value.
(&00): Number of megabytes.
VMS5039
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5039 INVALID VM-INDEX USED IN THE COMMAND '/CREATE-VM'. DEFAULT VALUE '1' TAKEN
VMS5041
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5041 HOME-PUBSET DEVICE '(&00)' CANNOT BE USED IN SHARED-MODE
Meaning
The device has been exclusively assigned.
(&00): Mnemonic device name
VMS5043
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5043 UNRECOVERABLE ERROR OCCURED DURING REP-PROCESSING IN HYPERVISOR. STARTUP ABORTED
VMS5044
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5044 SPECIFIED HYPERVISOR SIZE IS INCORRECT. DEFAULT VALUE TAKEN: (&00) MB
Meaning
Possible reasons:
- The specified Hypervisor size is not within valid range.
- Together with the minimum size of the Monitor VM the Hypervisor size
exceeds real memory size.
VMS5045
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5045 INVALID VALUE GIVEN TO THE PARAMETER SERVICE: (&00)
Meaning
(&00): Name of the faulty operand
VMS5046
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5046 Available Global Storage for VM2000: (&00) MB; assigned to the Monitor VM: (&01) MB
Meaning
(&00): Size in megabytes of the available Global Storage
(&01): Size in megabytes of the Global Storage assigned to the
Monitor VM
VMS5047
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5047 CPU (&00) COULD NOT BE STARTED BECAUSE OF HW-MALFUNCTION
Meaning
(&00): Number of the real CPU
VMS5048
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5048 CPU (&00) IS OFFLINE AND HAS NOT BEEN STARTED
Meaning
(&00): Number of the real CPU
VMS5049
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5049 NUMBER OF REAL CPU(s) RUNNING: (&00)
VMS5050
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5050 Number of available Spare-CPU(s): (&00)
VMS5051
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5051 Error while assigning Global Storage to the Monitor VM during Startup
Response
Retry the assignment after System Ready with the command
/ADD-VM-RESOURCES.
VMS5052
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5052 VALUE OF PATH-GROUP-ID PARAMETER: (&00)
VMS5053
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5053 Number of available Extra-CPU(s): (&00)
VMS5054
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5054 Performance quota of VM2000 deceleration feature set to (&00)
Meaning
(&00): Initial value of the performance quota in percent
VMS5055
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5055 VM2000 parameter (&00) specified by BS2000 parameter service ignored
Meaning
(&00): Name of the VM2000 parameter ignored
Response
Move the parameter from the BS2000 parameter file to the parameter
file of subsystem VM2-MON.
VMS5110
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5110 DMS ERROR CODE '(&00)'. VM2000 PARAMETER FILE NOT ACCESSIBLE. SUBSYSTEM START ABORTED
Meaning
The cause of the DMS error code can be detected with /HELP-MSG DMS(&00).
VMS5111
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5111 THE ATTRIBUTES OF THE VM2000 PARAMETER FILE DO NOT CORRESPOND TO THE REQUIRED FILE ATTRIBUTES. SUBSYSTEM START ABORTED
Meaning
The parameter file
- is not a SAM-file,
- does not have BLOCKSIZE (STD,1), or
- is an empty file.
VMS5112
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5112 INCONSISTENCY WITHIN THE VM2000 PARAMETER FILE. SUBSYSTEM START ABORTED
Meaning
The file could not be read.
VMS5145
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5145 INVALID VALUE OF OPERAND (&00) IN PARAMETER FILE. DEFAULT VALUE TAKEN
Meaning
(&00): Name of the faulty operand
VMS5224
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5224 DEVICE '(&00)' CANNOT BE USED IN SHARED-MODE. ASSIGNMENT REJECTED
Meaning
(&00): Mnemonic device name
Response
Assign the device exclusively after System Ready.
VMS5225
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5225 DEVICE OR CHANNEL TYPE MISMATCH. DEVICE '(&00)' INCORRECTLY GENERATED IN THE MONITOR SYSTEM
Meaning
(&00): Mnemonic device name
VMS5226
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5226 DEVICE '(&00)' NOT GENERATED IN THE MONITOR SYSTEM
Meaning
(&00): Mnemonic device name
VMS5227
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5227 DEVICE '(&00)' IMPLICITLY REMOVED BY VM2000
Meaning
(&00): Mnemonic device name
VMS5541
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5541 *** VIRTUAL MACHINE SYSTEM VM2000 (&00) READY ***
VMS5550
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5550 RECONFIGURATION ERROR FOR DEVICE '(&00)'. STARTUP CONTINUES
Meaning
(&00): Mnemonic device name.
Response
The specified device could not be logically detached in the monitor
system. This has no consequences for the VM2000 startup.
VMS5551
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5551 INTERNAL ERROR DURING VM2000 STARTUP. STARTUP ABORTED. TAKE DUMP
VMS5552
Destination: CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS5552 RESTART ERROR: VIRTUAL GS (&00) REMOVED FROM VIRTUAL MACHINE ((&01),(&02))
Meaning
During automatic-restart of the VM1, the GS Partition which is to be
used as virtual GS for a VM, could not be reallocated.
(&00): GS Partition Identification
(&01): Index of the virtual machine
(&02): Name of the virtual machine
VMS6000
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6000 VM2000 AGENT NOT AVAILABLE
Meaning
The VM2000 mode continues. But most of the VM2000 commands can not
be processed until the VM2000 agent becomes available again and
the message VMS6004 is issued.
Response
Please call the service.
VMS6001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6001 ADMINISTRATION COMPONENT OF VM SYSTEM NOT AVAILABLE
Meaning
The VM2000 mode continues. But most of the VM2000 commands can not
be processed until the failed administration component becomes
available again and the message VMS6005 is issued.
Response
Please call the service.
VMS6002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS6002 VM2000 AGENT STARTED
VMS6003
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS6003 VM2000 AGENT STOPPED
VMS6004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6004 VM2000 AGENT AVAILABLE AGAIN
VMS6005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6005 ADMINISTRATION COMPONENT OF VM SYSTEM AVAILABLE AGAIN
VMS6018
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS6018 CPU POOL ASSIGNMENT OF VIRTUAL MACHINE ((&00),(&01)) CHANGED BY SYSTEM ADMINISTRATION FROM CPU POOL '(&02)' TO CPU POOL '(&03)'
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Identification of the source CPU pool
(&03): Identification of the target CPU pool
VMS6020
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS6020 VIRTUAL MACHINE ((&00),(&01)) CREATED BY SYSTEM ADMINISTRATION
Meaning
Possible reasons:
- system administrator command
- automatic take over (failover) of the high available VM from another
Server Unit of the HA cluster
- take over of the VM from another Server Unit within a migration
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS6021
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : YES
VMS6021 VIRTUAL MACHINE ((&00),(&01)) TERMINATED BY SYSTEM ADMINISTRATION
Meaning
Possible reasons:
- system administrator command
- transfer of the VM to another Server Unit within a migration
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS6023
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6023 GUEST SYSTEM ON VM ((&00),(&01)) STARTED BY SYSTEM ADMINISTRATION
Meaning
(&00): Index of the virtual machine
(&01): Name of the virtual machine
VMS6094
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS6094 MEMORY OF VIRTUAL MACHINE ((&00),(&01)) HAS BEEN RECONFIGURED. CURRENT MEMORY SIZES: (&02) / (&03)
Meaning
The memory reconfiguration has not been initiated via the VM2000 CLI
in the Monitor VM.
(&00): Index of the virtual machine
(&01): Name of the virtual machine
(&02): Minimal memory size of the VM in megabytes
(&03): Total memory size of the VM in megabytes
VMS9001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS9001 FUNCTION NOT AVAILABLE FOR THE CURRENT INPUT MEDIUM OR THE CURRENT GUEST SYSTEM
VMS9002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS9002 SPECIFIED ADDRESS/AREA NOT DEFINED/NOT ACCESSIBLE
VMS9004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS9004 FUNCTIONALITY NOT SUPPORTED ON THE CURRENT HSI OR WITH THE CURRENT PARAMETER ASSIGNMENT
VMS9005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS9005 COMMAND COULD NOT BE OR ONLY PARTIALLY BE PROCESSED SUCCESSFULLY
VMS9006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
VMS9006 SPECIFIED HW-RESOURCES NOT USEFUL OR NOT AVAILABLE FOR /START-VM