Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM0001 CYCLE IN SYSLST'S INDIRECTIONS. CORRECT COMMAND
Meaning
User attempts to assign a 'SYSLSTn' system file to another
'SYSLSTm', provoking a cycle in the assignments.
'n' and 'm' are two numbers included between 01 and 99.
SSM0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM0002 System error during PCB access. Program terminated abnormally
SSM0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM0003 TERMINAL DISPLAY INTERRUPTED BY K2 AT 'PLEASE ACKNOWLEDGE'
Meaning
During the display at terminal, the K2 key has been pressed at
'PLEASE ACKNOWLEDGE'. Only the part of the message really
displayed is logged onto SYSLST followed by this message.
SSM0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM0004 The asked sysfile function is not available for a RLOGIN task
Meaning
A RLOGIN task can not use some specified functions as RDATA, WRTRD, etc.
Read/write a message on terminal using TIAM macros is not allowed except
for a MIP message or the SYSDTA/SYSIPT assignmenty to SYSCMD is rejected.
SSM0005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM0005 Unexpected return code received from system interface. SERSLOG entry written
SSM0006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM0006 Output to file with MODE=PHYS cancelled
Meaning
A WROUT or WRTRD of a text containing physical control characters has
been done when SYSOUT is not assigned to the terminal
(file, library element, S-variable, etc.). This message replaces the text
that should be output. This also occurs on SYSLST when the logging has
been requested by /MODIFY-JOB-OPTIONS LOGGING=*PARAM(LISTING=*YES).
SSM0301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM0301 24 BIT SVC USED IN STATE 'P2'. TASK ABNORMALLY TERMINATED
SSM1000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1000 INPUT FILE '(&00)' CANNOT BE CLOSED. DMS ERROR CODE '(&01)'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
In case of failure during close processing of an input file,
the DMS error code shows the error which occured.
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
SSM1001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1001 DCM ERROR 'I/O OUTSTANDING' DURING TERMINAL PROCESSING
SSM1002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1002 SYSTEM ERROR DURING DMS OPERATION ON FILE '(&00)'. DMS ERROR CODE '(&01)'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
SSM1004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1004 RELEASE MEMORY ERROR DURING SYSFILE ASSIGNMENT ON AN INPUT FILE
SSM1005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1005 SYSTEM ERROR DURING ERASE PROCESSING ON FILE '(&00)'. DMS ERROR CODE '(&01)'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
SSM1006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1006 SYSTEM ERROR DURING RELEASE OF FILE '(&00)'. DMS ERROR CODE '(&01)'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command or refer to DMS manual.
SSM1007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1007 SYSTEM ERROR DURING SYSFILE ASSIGNMENT ON AN INPUT FILE
SSM1008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1008 SYSTEM ERROR DURING COMMAND EXIT PROCESSING
SSM1009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1009 NO MORE CLASS 5 MEMORY AVAILABLE DURING SYSFILE PROCESSING
SSM1010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1010 ABNORMAL PROGRAM TERMINATION DUE TO A WRONG ERROR ROUTINE ADDRESS
Response
Correct error routine address and restart program.
SSM1012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1012 SYSTEM ERROR DURING RELEASE OF MEMORY IN COMMAND PROCESSING
SSM1013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1013 SYSTEM ERROR DURING COMMAND PROCESSING
SSM1015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1015 TERMINAL DISCONNECTED
Meaning
Processing aborted.
Response
Inform the system administrator.
SSM1016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1016 SYSTEM ERROR DURING 'GET' PROCESSING. FILE '(&00)' NOT OPENED. DMS ERROR CODE '(&01)'. DMS ERROR : /HELP-MSG-INFORMATION DMS(&01)
Meaning
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
SSM1017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1017 SYSTEM ERROR DURING 'MSG' PROCESSING
SSM1021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1021 SYSTEM ERROR DURING SWITCHING DISK TO TAPE
SSM1024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1024 USER ERROR DURING 'RDCRD' PROCESSING. USER DUMP CREATED
Meaning
Due to a user error in RDCRD macro (p/l error, ...),
the user program terminates abnormally.
Response
Diagnose the error.
SSM1025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1025 NO FD I/O DEVICE AVAILABLE. COMMAND REJECTED
Meaning
A user has asked to read from a FD, but there is no
FD I/O device available.
Response
The user may wait and re-enter the command.
SSM1026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1026 NO FD DEVICE AVAILABLE OR THE OPERATOR WAS UNABLE TO MOUNT THE SPECIFIED VSN'S. COMMAND REJECTED
Response
Ask the operator for the reason and eventually correct the list of VSN's,
if there is any error and re-enter the command.
SSM1027
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1027 ACCESS TO FD WITH VSN '(&00)' PROTECTED. COMMAND REJECTED
Meaning
The volume VSN (&00) mounted is protected with the accessibility byte
not blank.
Response
Give another VSN, or remove the accessibility byte.
SSM1028
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1028 OPEN ERROR ON FD WITH VSN '(&00)' ON FD I/O DEVICE '(&01)'. COMMAND REJECTED
Meaning
The track 0 cannot be read, or there is a wrong VOL1 label.
Response
Look at the floppy disk, modify when possible the error
and re-enter the command.
SSM1029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1029 FILE '(&00)' NOT FOUND ON FLOPPY DISK WITH VSN '(&01)'. COMMAND REJECTED
Response
Look for the right file name on the floppy disk and re-enter the command.
SSM1030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1030 OPEN ERROR FOR FILE '(&00)' ON FD DEVICE '(&01)'. COMMAND REJECTED
Meaning
An error, such as: error during the read of the file's
label, or a wrong 'HDR1' label, has occurred during the
processing of OPEN of the file '(&00)'.
Response
If possible, correct the floppy disk and re-enter the command.
SSM1031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1031 UNEXPECTED RETURN CODE (RC) SENT BACK BY TIAM TO SYSFILE CONVERTED TO AN UNRECOVERABLE ERROR
SSM1100
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SSM1100 SYSFILE SUBSYSTEM NOT ACTIVE. TASK ABNORMALLY TERMINATED
Meaning
A SYSFILE service is requested prior to system ready.
SSM1101
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SSM1101 SYSFILE SUBSYSTEM IS NOT COMPATIBLE WITH SYSTEM VERSION
Meaning
Integration error, SYSFILE cannot be initialized.
Response
Reload system with correct SYSFILE version.
SSM1201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM1201 An internal error occurs during the pseudo close of either the syslst or the sysout file
SSM1202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1202 System file is empty or not assigned
Meaning
A read mark can't be set in an empty system file
SSM1203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1203 Bad MONJV given in the /SET-<sysfile>-READ-MARK command
Meaning
The specified JV is not monitoring a job
SSM1204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1204 System file '(&00)' pseudo closed successfully
SSM1205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1205 Waiting time for pseudo close operation expires, processing continues
SSM1206
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1206 TSN not found or command processing illegal. Command terminated
Meaning
Possible reasons:
- the task does not exist
- the task does not allow information to be displayed
SSM1207
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1207 The system file is assigned to a library element or a S-variable
SSM1208
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1208 The MONJV given in the /SET-<sysfile>-READ-MARK command points to a task on a foreign system
SSM1209
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1209 Waiting time expires, processing continues
Meaning
The command has probably been executed for a task that cannot be
interrupted
SSM1210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1210 The system file is already closed
SSM1211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM1211 SYSTEM FILE ON TAPE, PSEUDO CLOSE OPERATION NOT POSSIBLE.
SSM2000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2000 SYSLST SWITCHED FROM DISK TO TAPE. SPOOLOUT BEFORE CLOSE FUNCTION SUPPRESSED
SSM2001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2001 DMS ERROR CODE '(&00)' DURING OPEN OF '*DUMMY' FILE. REASSIGNMENT OF SYSTEM FILE TO 'PRIMARY'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)
Meaning
For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
SSM2002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2002 DMS ERROR CODE '(&00)' DURING OPEN OF A CATALOGED SYSTEM FILE. REASSIGNMENT OF SYSTEM FILE TO 'PRIMARY'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)
Meaning
For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
SSM2003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2003 SYNTACTICAL ERROR IN MEMBER NAME '(&00)' OF LIBRARY '(&01)'. COMMAND TERMINATED
Meaning
The member name doesn't begin by an alphabetic character or is too long.
Response
Re-enter the command with the correct member name.
SSM2004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2004 DMS ERROR '(&00)' ON LIBRARY '(&01)'. COMMAND TERMINATED. DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)
Meaning
A DMS error has occurred during the processing of a library file.
For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
Response
Analyse error code.
SSM2005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2005 DMS ERROR '(&00)' ON FILE '(&01)'. COMMAND TERMINATED. DMS ERROR: /HELP DMS(&00)
Meaning
A DMS error has occurred during the processing of the
temporary copy of a library member.
For more detailed information about DMS error enter /HELP command.
Response
Analyse the error.
SSM2006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2006 FILE '(&00)' IS NOT A VALID SOURCE LIBRARY. COMMAND TERMINATED
Meaning
The specified file is not a library file, or it's not a
source library, or it contains inconsistencies in its directory.
Response
Analyse the error and take appropriate action.
SSM2007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2007 LIBRARY '(&00)' IS EMPTY. COMMAND TERMINATED
SSM2008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2008 MEMBER '(&00)' NOT FOUND IN LIBRARY '(&01)'. COMMAND TERMINATED
SSM2009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2009 SYSTEM ERROR DURING ASSIGNMENT OF THE PRIMARY SYSOUT FILE
Meaning
An error has occurred during the CATAL, FILE or OPEN of the primary SYSOUT
file.
Response
See the DMS return code in the SERSLOG entry.
SSM2010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2010 SYSTEM ERROR DURING ASSIGNMENT OF THE PRIMARY SYSLST FILE
Meaning
An error has occurred during the CATAL, FILE or OPEN of the primary SYSLST
file.
Response
See the DMS return code in the SERSLOG entry.
SSM2011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2011 SYSTEM ERROR DURING ASSIGNMENT OF THE PRIMARY SYSOPT FILE
Meaning
An error has occurred during the CATAL, FILE or OPEN of the primary SYSOPT
file.
Response
See the DMS return code in the SERSLOG entry.
SSM2012
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM2012 UNABLE TO ASSIGN '(&00)' TO FILE '(&01)' DUE TO DMS ERROR CODE '(&02)'. PREVIOUS ASSIGNMENT KEPT. DMS ERROR: /HELP-MSG-INFORMATION DMS(&02)
Meaning
The assignment is impossible due to the DMS error during
the FILE, CATAL or OPEN of the file.
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
(&00): SYSOUT, SYSLST or SYSOPT
Response
User error:
- Retry the command with a correct file.
System error:
- Contact the system administrator.
SSM2013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2013 NO MORE PROGRAM LOADED. TO RESUME THE PROCEDURE, ENTER COMMAND AGAIN WITH 'MODE=COMMAND'
Meaning
No program is loaded and the user issued a /RESUME-PROCEDURE
command to return to a procedure which was interrupted in
program mode. o return to the interrupted procedure.
Response
Re-enter command with MODE=COMMAND.
SSM2014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2014 TASK IN ESCAPE MODE AT LEVEL NUMBER '(&00)'
Meaning
The message is displayed if either an /HOLD-PROCEDURE command is
encountered, or the answer to MSG EXC0613 is YES, or the escape mode
is downward propagated, due to an /END-PROCEDURE or /DO command
issued in escape mode.
SSM2015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2015 /HOLD-PROCEDURE COMMAND NOT ALLOWED IN BATCH. COMMAND IGNORED
SSM2016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2016 /HOLD-PROCEDURE COMMAND MAY NOT BE ENTERED FROM TERMINAL. COMMAND IGNORED
Meaning
A command /HOLD-PROCEDURE may not be entered from the terminal, i.e. when
the task is not in procedure mode, or when the task is already in
interrupted state.
SSM2017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2017 SYNTACTICAL ERROR IN /RESUME-PROCEDURE COMMAND. RE-ENTER COMMAND
SSM2018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2018 /RESUME-PROCEDURE MAY ONLY BE ENTERED FROM TERMINAL
SSM2019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2019 NO PROCEDURE IN INTERRUPTED STATE. /RESUME-PROCEDURE COMMAND IGNORED
SSM2020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2020 NO PROGRAM LOADED. RE-ENTER COMMAND WITHOUT 'MODE=PROGRAM'
Meaning
No program is loaded and a user issued command /RESUME-PROCEDURE
command with MODE=PROGRAM to return to an interrupted procedure.
Response
Re-enter command without MODE=PROGRAM.
SSM2021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2021 INPUT EXCEEDS LOGON BUFFER SIZE. INCREASE BUFFER SIZE BY MEANS OF 'BUFFER' OPERAND IN /SET-LOGON-PARAMETERS COMMAND
Meaning
The user entered an operand value which exceeds the buffer limits
defined at SET-LOGON-PARAMETERS.
Response
Enter new value or issue a 'HOLD-PROGRAM'.
SSM2022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2022 INPUT OPERAND VALUE LONGER THAN 255 BYTES
Response
Enter new value or a 'HOLD-PROGRAM'.
SSM2023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2023 STRING DELIMITER IS MISSING
Meaning
User entered a string of alphanumerics which does not end with an
apostrophe.
Response
Enter a new string or a 'HOLD-PROGRAM'.
SSM2024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2024 STRING SYNTAX ERROR
Meaning
User entered an invalid string of alphanumerics due to the string
separator (space) being absent.
Response
Enter a different string or a 'HOLD-PROGRAM'.
SSM2025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2025 OPERAND ERROR. RE-ENTER THE CORRECT OPERAND VALUE
Response
Enter a new operand or a 'HOLD-PROGRAM'.
SSM2029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2029 SYSTEM ERROR DURING 'ALLOCATE/DEALLOCATE' PROCESSING
SSM2031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2031 WARNING: FILE GROUP '(&00)' CANNOT BE DECLARED IN OUTPUT MODE ON DISKS
Meaning
The user cannot direct the system cataloged file SYSLST/SYSOPT/SYSOUT to
a file group, defined on private or public disks. Only a file group
on tape in output mode is allowed.
SSM2032
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2032 DMS ERROR '(&00)' WHILE SWITCHING FROM DISK TO TAPE. DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)
Meaning
For more detailed information about the DMS error enter
/HELP-MSG-INFORMATION command.
SSM2033
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
SSM2033 USER ID '(&00)', TSN: (&01) REQUESTED TAPE/MBK FOR CATALOGED SPOOL FILE
Meaning
In interactive or batch mode a user requests a tape/MBK for his
cataloged file.
SSM2034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2034 NO MORE SPACE AVAILABLE ON DISK. SPOOL FILE '(&00)' WILL BE WRITTEN ON TAPE
Meaning
Batch usage - no space for cataloged SPOOL file on disk store.
SSM2035
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2035 NO MORE SPACE AVAILABLE ON DISK FOR SPOOL FILE '(&00)'. DO YOU WANT TO COPY AND EXTEND THE FILE ON A TAPE/(&01) OR TO CONTINUE ON *PRIMARY ? REPLY (T=TAPE; M=(&01);P=*PRIMARY;N=NO)
Meaning
Terminal usage - it is determined that no space is available on disk store
for the cataloged SPOOL file (&00).
Response
T: A tape is desired.
M: A (&01) is desired.
P: The system file is reassigned to *PRIMARY.
N: The system file is reassigned to *DUMMY.
SSM2036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2036 INVALID OPERAND IN COMMAND. COMMAND REJECTED
Response
Correct the error and re-enter the command.
SSM2037
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2037 Unable to process a SYSFILE procedure called by 'DO' in a S-Procedure with SYSTEM-FILE-CONTEXT=*SAME-AS-CALLER
Response
Transform the SYSFILE procedure into a S-Procedure or use CALL or
CALL-PROCEDURE command instead of DO command.
SSM2038
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2038 Coded-Character-Set not allowed
Meaning
A coded character set can not be specified with the parameter OPEN-MODE=
*EXTEND or with the parameter TO=*VARIABLE/*PRIMARY/*DUMMY
SSM2039
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM2039 DMS ERROR '(&00)' WHILE CLOSING A SYSOUT/OPT/LST (DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)). EITHER PROCESSING CONTINUES (SYSOUT/OPT) OR PROCESSING IS ABORTED (SYSLST)
Meaning
A DMS error has been detected while closing SYSOUT, SYSOPT or a SYSLST.
For more information about DMS error enter /HELP-MSG-INFORMATION
command.
SSM2041
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2041 INCOMPATIBLE OPERATION MODE WITH /RESTART-PROGRAM COMMAND. COMMAND PROCESSING ABORTED
Meaning
The SYSFILE environment of a task, saved by the CHKPT macro in a
specified mode of operation (batch or interactive), is reconstructed,
by the /RESTART-PROGRAM command, in the other mode (interactive or
batch). This construction is stopped because specific conditions
connected with the operation mode have been found; (redirection of
SYSOUT in batch, and procedure interruption is interactive).
SSM2042
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2042 /RESTART-PROGRAM COMMAND MAY NOT BE ISSUED WITHIN A PROCEDURE MODE
SSM2043
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2043 THE INPUT COMMAND OR DATA EXCEEDS THE CONTINUATION AREA. INPUT IGNORED
Meaning
The length of the resulting input command or data
can be maximum 2040 bytes, including the V-field's
length. This input is ignored and is not displayed.
However, this error message is not sent, when the
erroneous input is skipped by a /SKIP-COMMANDS command,
or by SPIN-OFF mechanism.
Response
The user is advised to reduce the contents of the
concerned input data or command.
SSM2044
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2044 COMMAND REJECTED BY THE SYSTEM ADMINISTRATOR
Meaning
The command was rejected by the exit routine for SYSCMD.
SSM2045
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2045 DATA RECORD READ WHEN COMMAND WAS EXPECTED
Meaning
A data record was read when a command was expected.
This data is displayed only when the protocol allows it.
This error message is not sent when the erroneous input is skipped
by a /SKIP-COMMANDS command, or by the SPIN-OFF mechanism.
Response
Correct the JCL procedure and retry.
SSM2046
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2046 'SYSDTA' IS STILL ASSIGNED. RESET ASSIGNMENT WITH /ASSIGN-SYSDTA TO-FILE=*PRIMARY AND RE-ENTER /RESTART-PROGRAM COMMAND
Response
Retry after releasing it by a /ASSIGN-SYSDTA command.
SSM2047
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2047 'SYSIPT' IS STILL ASSIGNED. RESET ASSIGNMENT WITH /ASSIGN-SYSIPT TO-FILE=*PRIMARY AND RE-ENTER /RESTART-PROGRAM COMMAND
Response
Retry after releasing it by a /ASSIGN-SYSIPT command.
SSM2048
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2048 Coded-Character-Set not supported by XHCS
SSM2049
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2049 'SYSOPT' IS STILL ASSIGNED. RESET ASSIGNMENT WITH /ASSIGN-SYSOPT TO-FILE=*PRIMARY AND RE-ENTER /RESTART-PROGRAM COMMAND
Response
Retry after releasing it by a /ASSIGN-SYSOPT command.
SSM2050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2050 EXPLICIT '(&00)' ASSIGNMENT STILL IN EFFECT. COMMAND PROCESSING ABORTED
Meaning
SYSLST or a SYSLSTnn system file is reassigned explicitly when issued
a /RESTART-PROGRAM command.
'nn' is a number included between 01 and 99.
(&00): SYSLST or SYSLSTnn system file.
Response
Reassign the corresponding system file
to its primary value and re-enter the /RESTART-PROGRAM command.
SSM2051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2051 EXPLICIT 'SYSOUT' ASSIGNMENT STILL IN EFFECT
Meaning
SYSOUT still assigned in batch when issuing a /RESTART-PROGRAM command.
SSM2052
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM2052 PROCEDURE FILE '(&00)' CANNOT BE OPENED. DMS ERROR CODE '(&01)'. COMMAND TERMINATED. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
Procedure file referenced by a /DO or /CALL-PROCEDURE cannot be
opened. For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
Response
Analyse error code and re-enter the command.
SSM2053
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM2053 FILE '(&00)' IS NOT A PROCEDURE FILE. COMMAND REJECTED
Meaning
The file is not a SAM or ISAM file, or does not begin with
a /BEGIN-PROCEDURE command.
SSM2054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2054 SYMBOLIC OPERAND ERROR IN COMMAND. COMMAND IGNORED
Response
Re-enter a corrected command.
SSM2055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2055 SYMBOLIC OPERAND ERROR IN /BEGIN-PROCEDURE COMMAND. PROCEDURE ABORTED
Meaning
A syntactical error has been found at symbolic operand level.
An /END-PROCEDURE command is simulated.
Response
Correct the error and re-enter the procedure file.
SSM2056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2056 SYMBOLIC OPERAND INCONSISTENCY BETWEEN /BEGIN-PROCEDURE COMMAND AND CALLING COMMAND. PROCEDURE TERMINATED
Meaning
The symbolic operands specified in the calling command (/DO or
/CALL-PROCEDURE) doesn't correspond with those declared in the
/BEGIN-PROCEDURE command. The procedure file is terminated: an
/END-PROCEDURE command is simulated.
Response
Re-enter the procedure file with the correct operand.
SSM2057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2057 INVALID /BEGIN-PROCEDURE COMMAND. IT MUST BE THE FIRST COMMAND OF A PROCEDURE FILE. COMMAND IGNORED
SSM2058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2058 THE PROTOCOL OPTION IS INVALID IN /BEGIN-PROCEDURE COMMAND. NO LOGGING WILL BE DONE. PROCEDURE CONTINUES
Response
Modify the PROTOCOL option in the /BEGIN-PROCEDURE command.
SSM2059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2059 INVALID DATA SUBSTITUTION OPTION IN /BEGIN-PROCEDURE COMMAND. NO DATA SUBSTITUTION WILL BE DONE
Meaning
The value assigned to the ESCAPE-CHARACTER operand in the
/BEGIN-PROCEDURE command is invalid. Procedure continues but no
data substitution will be done.
SSM2060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2060 DO YOU WANT TO ABORT ALL ACTIVATED PROCEDURES ? REPLY (Y=YES; N=NO)
Meaning
During terminal procedure parameter prompting K2 occurs
Y : All the currently activated procedures are aborted.
N : Procedure continues, preceding prompting is repeated.
SSM2061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2061 ERROR DURING THE ACCESS TO A LIBRARY ELEMENT
Meaning
Syntactical error in member name,
DMS error during library access,
the file isn't a valid library,
the library is empty,
the member doesn't exist in the library,
error during PLAM operation (ATTACH,OPEN,GET,CLOSE,DETACH),
PLAM isn't available.
SSM2062
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2062 Command too long for SYSFILE internal area
SSM2063
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2063 THE REQUEST OF MEMORY FOR SYSFILE PROCESSING IS UNSUCCESSFUL. COMMAND NOT PROCESSED
Response
Check the reason why user's memory limit is reached
or contact the system administrator.
SSM2064
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2064 THE FILE REFERENCED IN THE COMMAND CANNOT BE PROCESSED IN RFA MODE. COMMAND TERMINATED
Meaning
These commands cannot be executed for remote files:
/CALL-PROCEDURE
/ENTER-JOB
/ASSIGN-SYSxxx.
SSM2065
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2065 END OF FILE REACHED DURING PROCESSING OF PROCEDURE FILE
Meaning
EOF reached during procedure file processing without
an /END-PROCEDURE command being encountered.
SSM2066
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2066 SPOOLOUT REQUESTED FOR '(&00)'. SPOOL NOT AVAILABLE. DO YOU WANT TO WAIT FOR 'SPOOL READY'? REPLY (Y=YES; N=NO)
Meaning
(&00): SYSOUT, SYSLST or SYSOPT.
Response
Y: The processing waits for 'SPOOL READY' (the terminal is
not available until the request has been accepted by SPOOL).
N: The SPOOLOUT is lost and the processing continues.
SSM2067
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2067 SPOOL NOT AVAILABLE. THE SPOOLOUT REQUEST IS DEFERRED UNTIL 'SPOOL READY'
SSM2068
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2068 TASK NOT IN PROCEDURE MODE. COMMAND TERMINATED
SSM2074
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SSM2074 SPOOL NOT LOADED OR NOT READY. COMMAND TERMINATED
SSM2075
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2075 SPOOLOUT REQUESTED FOR FILE '(&00)'? REPLY (Y=YES; N=NO)
Meaning
(&00): SYSLST, SYSOUT or SYSOPT.
Response
Y: The SPOOLOUT request is scheduled and the processing continues.
N: The SPOOLOUT is lost and the processing continues.
SSM2076
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2076 WRITING TO FILE '(&00)' FAILED ON CURRENT DEVICE '(&01)'. SWITCHING TO DEVICE '(&02)'.
SSM2077
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2077 ALL $SSMXXXX LINK NAMES IN USE. FURTHER PROCESSING NOT POSSIBLE.
SSM2078
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SSM2078 NO MORE SPACE AVAILABLE ON DISK FOR FILE '(&00)'. DO YOU WANT TO COPY AND EXTEND THE FILE ON A TAPE/(&01) ? REPLY (T=TAPE; M=(&01) ;N=NO)
Meaning
Terminal usage - it is determined that no space is available on disk store
for the cataloged SPOOL file (&00).
Response
T: A tape is desired.
M: A (&01) is desired.
N: The system file is reassigned to *DUMMY.
SSM2221
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2221 PROGRAM/TASK TERMINATED: 'MAXOPT' REACHED
Meaning
The maximum value of SYSOPT is reached and,
the user does not want to continue the processing.
The program (WRTOT records) is terminated without dump.
Response
Program error (e.g. loop):
- Correct the program and retry.
MAXOPT limit too low:
- Increase the MAXOPT limit and retry.
SSM2222
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2222 SPECIFIED MAXLST LIMIT REACHED. CONTINUE? REPLY (Y=YES; N=NO)
Response
Y: The user decides to continue. The MAXLST counter is reset
to zero and the previously defined limit remains unchanged.
N: The user decides to abort. The program is terminated
without dump (termination code SSM2223).
SSM2223
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2223 PROGRAM/TASK TERMINATED: 'MAXLST' REACHED
Meaning
The maximum value of SYSLST is reached and,
the user does not want to continue the processing.
The program (WRLST records) is terminated without dump.
Response
Program error (e.g. loop):
- Correct the program and retry.
MAXLST limit too low :
- Increase the MAXLST limit and retry.
SSM2224
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2224 SPECIFIED MAXLST LIMIT FOR SYSOUT REACHED. CONTINUE? REPLY (Y=YES; N=NO)
Response
Y: The user decides to continue. The MAXOUT counter is reset
to zero and the previously defined limit remains unchanged.
N: The user decides to abort. The program is terminated
without dump (termination code SSM2228).
SSM2225
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2225 CLOSE ERROR ON SYSTEM FILE. JOB CONTINUES
Meaning
An error has been detected during closing
of a cataloged system file (SYSOUT,SYSLST,SYSOPT).
SSM2226
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SSM2226 SPECIFIED MAXOPT LIMIT REACHED. CONTINUE? REPLY (Y=YES; N=NO)
Response
Y: The user decides to continue. The MAXOPT counter is reset
to zero and the previously defined limit remains unchanged.
N: The user decides to abort. The program is terminated without dump
(termination code SSM2021.
SSM2227
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2227 SYSTEM ERROR DURING 'DCTI' PROCESSING IN TIAM
Meaning
ERRLOG entry created.
SSM2228
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2228 PROGRAM/TASK TERMINATED: 'MAXLST' FOR SYSOUT REACHED
Meaning
The maximum value of SYSOUT is reached and,
the user does not want to continue the processing.
The program (WROUT records) is terminated without dump.
Response
Program error (e.g. loop):
- Correct the program and retry.
MAXLST limit too low :
- Increase the MAXLST limit and retry.
SSM2250
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM2250 INCONSISTENT LOGGING LINE SIZE, 132 IS ASSUMED
Meaning
The range of LOGGING-LINE-SIZE is 16..2044, 132 is the standard value.
Response
None, the command is accepted
SSM3000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3000 PLAM '(&00)' ERROR '(&01)'/'(&02)' ON LIBRARY '(&03)'. COMMAND NOT PROCESSED. CHECK ERROR CODE
Meaning
(&00): ATTACH/OPEN/GET/CLOSE/DETACH
(&01): First PLAM error code
(&02): Second PLAM error code
(&03): Library name
SSM3001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3001 PLAM NOT IN SYSTEM. COMMAND NOT PROCESSED. CONTACT SYSTEM ADMINISTRATOR
SSM3005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3005 SYSTEM ERROR DURING '$SINF' PROCESSING. TASK TERMINATED ABNORMALLY. CONTACT SYSTEM ADMINISTRATOR
Meaning
System error during CLASS2OP access processing.
SSM3015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3015 ABNORMAL PROGRAM TERMINATION DUE TO A WRONG ADDRESS OF THE ERROR ROUTINE. PROGRAM ABORTED
Meaning
The error code is indicated in user register 15.
Response
Correct and retry the user program.
SSM3016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3016 SYSTEM ERROR DURING 'TIAM' PROCESSING
Meaning
ERRLOG entry created.
SSM3017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3017 PARAMETER LIST NOT ACCESSIBLE FOR SVC39. PROGRAM TERMINATED WITH DUMP
Response
Correct and retry the user program.
SSM3018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3018 PARAMETER LIST NOT ACCESSIBLE FOR OLD SYSFILE SVC (NOT 39). PROGRAM TERMINATED WITH DUMP
Meaning
Correct the program and retry.
SSM3019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3019 'YTIOUT' ISSUED FROM NON-PRIVILEGED PROGRAM. PROGRAM TERMINATED ABNORMALLY
Response
Correct the program and retry.
SSM3026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3026 FILE NAME MISSING. COMMAND REJECTED
Meaning
The operand 'NAME=' is missing, when '(DISKETTE)' or
'(MN)' and 'VOLUME=' are specified.
Response
Correct the command and re-enter.
SSM3027
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3027 'VOLUME' OPERAND MISSING. COMMAND REJECTED
Meaning
The operand 'VOLUME=' is missing, while '(DISKETTE)'
or '(MN)' and 'NAME=' are specified.
Response
Correct the command and re-enter.
SSM3028
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3028 '(&00)' IS NO FD I/O DEVICE. COMMAND REJECTED
Meaning
The user has specified 'TO-FILE=*DISKETTE(UNIT,...)', and
the unit (&00) does not correspond to a FD I/O device.
(&00): Mnemonic of the device.
Response
Get the correct mnemonic of the FD I/O device from the
operator, correct the command and re-enter.
SSM3029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3029 'SYSIPT' IS NOT ALLOWED FOR FLOPPY DISK. COMMAND REJECTED
Meaning
The user has specified 'TO-FILE=*DISKETTE(UNIT=,...)'.
Response
The system file SYSIPT, with macro RDCRD cannot be
directed to a floppy disk device. The user may use the macro RDATA and
can direct the system file SYSDTA to a FD.
SSM3030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3030 A FD I/O DEVICE IS ALREADY ASSIGNED. PROCESSING CONTINUES
Meaning
The user has specified the direction of the 'SYSDTA' to
a FD I/O device, with new or same values, which are
ignored, while 'SYSDTA' is already directed to the device.
SSM3031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3031 VALIDATION OPERANDS ERROR. COMMAND REJECTED
Meaning
A command '/ASSIGN-SYSLST' is specified with:
1) a ND2 operand.
The NDFILE exists and the values specified do not
exist in that file (MXM or LOOP records)
2) a 'LOOP' operand but no NDFILE or no SPOOLFILE exists.
3) an invalid value (>31) for the 'SHIFT' operand has been given.
Response
Correct the command with appropriate values and re-enter the command.
SSM3034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3034 ASSIGNMENT IS ALREADY PRIMARY. PROCESSING CONTINUES
Meaning
User issued /ASSIGN-SYSxxx command to change
SYSIPT or SYSDTA to its primary assignment
and the system file had already been in primary assignment.
SSM3035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3035 ASSIGNMENT ALREADY THE SAME AS '(&00)'. PROCESSING CONTINUES
Meaning
The specified system file is already correctly assigned.
The command will be ignored.
(&00): 'SYSCMD' or 'SYSDTA'.
SSM3036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3036 'SYSIPT' CANNOT BE ASSIGNED TO A TERMINAL
Response
Assign SYSIPT to an appropriate device.
SSM3039
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3039 NO PRIMARY ASSIGNMENT EXISTS FOR FILE REASSIGNMENT
Meaning
User attempted to reassign a system file back to its primary assignment
when no primary assignment for the file has been designated.
Response
Assign file and retry.
SSM3042
Destination: CONSOLE Routing code: J Weight: 99
Warranty : NO
SSM3042 DMS ERROR '(&00)' ON FILE '(&01)'. JOB ABORTED. DMS ERROR: /HELP-MSG-INFORMATION DMS(&00)
Meaning
An OPEN error has been detected on the SYSCMD file during the task
initialization. For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
Response
Check the status of the file and respool in or re-enter the job.
SSM3052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3052 'SYSDTA' OR 'SYSIPT' REASSIGNED TO PRIMARY. PROCESSING CONTINUES
Meaning
At checkpoint time, SYSDTA or SYSIPT had been assigned.
This assignment is lost. SYSDTA or SYSIPT is reassigned to PRIMARY.
Command continues.
SSM3053
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3053 INVALID OPERAND OR COMBINATION OF OPERANDS. COMMAND REJECTED
SSM3054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3054 ILLEGAL UNIT NUMBER FOR SVC39. PROGRAM TERMINATED ABNORMALLY
Meaning
The unit number used in header of the SVC39 parameter list is incorrect
or not supported.
Response
Correct the program and retry.
SSM3055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3055 USER SPECIFIED INCORRECT 'RECFORM' FOR THE FILE
Meaning
A SAM or ISAM file contains an invalid record format.
SSM3056
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM3056 FILE '(&00)' COULD NOT BE OPENED, DUE TO DMS ERROR: '(&01)'. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
A /ASSIGN-SYSxxx command is being processed, but one of following errors
occurs:
- For SYSDTA or SYSIPT TO=< file name > is specified, but the
specified file does not exist.
- For SYSLST or SYSOPT or SYSOUT TO= < file name > is specified,
and the specified file already exists.
For more detailed information about DMS error enter
/HELP-MSG-INFORMATION command.
Response
Look for the meaning of the error code, correct and
re-enter the command.
SSM3057
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
SSM3057 UNRECOVERABLE ERROR ON LINE '(&00)'. TERMINAL STATUS : '(&01)'
Meaning
An unrecoverable communication error has occurred on line (&00).
(&00): Processor/station name.
(&01) : Terminal status : X'00' - terminal failed, but is now OK
X'80' - disconnected
X'40' - waits for an entry (dialog)
X'20' - break/escape mode
X'10' - IO busy
X'08' - OMNIS emulation.
SSM3058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3058 24-BIT SVC USED IN 31-BIT ADDRESSING MODE. PROGRAM TERMINATED ABNORMALLY
Meaning
The SYSFILE macros with PARMOD=24 are not authorized in XS mode.
Response
Use the macros with PARMOD=31 or load the program in no-XS mode.
SSM3059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3059 NEW RETURN CODE NOT PROVIDED TO OLD 24-BIT SVC CALLER. PROGRAM TERMINATED ABNORMALLY
Meaning
A return code only supported by PARMOD=31 macros has been detected,
while PARMOD=24 macros were used. For compatibility reason,
(new return codes are not supported by old interface),
the program is terminated abnormally.
Response
Correct and retry the program.
SSM3060
Destination: CONSOLE Routing code: * (main console) Weight: 98
Warranty : NO
SSM3060 NO DEVICE AVAILABLE FOR SWITCHING FILE FROM DISK TO TAPE/CARTRIDGE. CONTINUE? REPLY (R=RETRY (TAPE); T=TERMINATE; M=(&00))
Response
R: The processing retries to obtain a free tape device.
T: The system file is reassigned to 'PRIMARY' or in case of
already primary file to 'DUMMY'
M: The processing (re)tries to obtain a free (&00)
SSM3061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3061 ILLOGICAL CONDITION ENCOUNTERED DURING ERASE OR SPOOLOUT OF SYSTEM FILES. TASK TERMINATED ABNORMALLY. CONTACT SYSTEM ADMINISTRATOR
Meaning
The parameter list provided to SYSFILE processing is incorrect.
SSM3063
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3063 SYSTEM ERROR DURING RESTART PROCESSING
SSM3064
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SSM3064 SYSTEM ERROR DURING ASSIGNMENT OF A PRIMARY OUTPUT FILE (SYSOUT,SYSLST, SYSOPT)
SSM3100
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM3100 S-VARIABLE '(&00)' DOESN'T EXIST
Meaning
The Variable must be declared with the DECLARE-VARIABLE command.
SSM3101
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM3101 INVALID TYPE FOR S-VARIABLE '(&00)'
Meaning
Change type of variable or use another list variable.
SSM3102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3102 THE SUBSYSTEM SDF-P IS NOT AVAILABLE
SSM3103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3103 UNRECOVERABLE ERROR ON S-VARIABLE. SYSTEM FILE REASSIGNED TO *PRIMARY
SSM3104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3104 DATA-ESCAPE-CHARACTER specification other than *COMPATIBLE not allowed when SYSDTA is assigned to SYSCMD or *PRIMARY
SSM3105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3105 DATA-ESCAPE-CHARACTER value invalid in current software configuration
SSM3106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3106 Reading from SYSDTA with DATA-ESCAPE-CHARACTER specification other than *COMPATIBLE only allowed in S-procedures.
Meaning
A previous SYSDTA assignment with DATA-ESCAPE-CHAR other than
*COMPATIBLE has been made. With this type of assignment, a RDATA
is not allowed in old-context procedures (Non-S-procedures or
batch-0)
SSM3107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3107 SYNTAX ERROR DURING ESCAPE CHARACTER REPLACEMENT
SSM3108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3108 SEMANTIC ERROR DURING ESCAPE CHARACTER REPLACEMENT
SSM3200
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3200 AN ERROR OCCURRED DURING THE SYSFILE PLAM PROCESSING
SSM3210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3210 THE *LIB-ELEM(L=(&00),E=(&01)(V=(&02)),T=(&03)) CANNOT BE OPENED DUE TO PLAM ERROR (PLA(&04))
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
(&04):PLAM error code
The library-element cannot be opened.
The previous assignment is kept.
For more detailed information about the PLAM error,
enter /HELP-MSG-INFORMATION command.
SSM3215
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3215 LIBRARY '(&00)' NOT FOUND
Meaning
(&00):library name
The library doesn't exist.
The previous assignment is kept.
SSM3220
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3220 THE SPECIFIED LIBRARY (&00) IS NOT A PLAM LIBRARY
Meaning
(&00):library name
The type of the library must be PLAM.
The previous assignment is kept.
SSM3225
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3225 THE *LIB-ELEM(L=(&00),E=(&01)(V=(&02)),T=(&03)) CANNOT BE OPENED DUE TO DMS ERROR (DMS(&04))
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
(&04):DMS error code
The library-element cannot be opened.
The previous assignment is kept.
For more detailed information about the DMS error,
enter /HELP-MSG-INFORMATION command.
SSM3230
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3230 ELEMENT '(&01)(VERSION=(&02)),TYPE=(&03)' NOT FOUND IN LIBRARY '(&00)'
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
The element doesn't exist in the library.
The previous assignment is kept.
SSM3235
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3235 THE *LIB-ELEM(L=(&00),E=(&01)(V=(&02)),T=(&03)) IS LOCKED
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
The library-element is locked.
The previous assignment is kept.
Response
Retry later.
SSM3240
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3240 THE *LIB-ELEM(L=(&00),E=(&01)(V=(&02)),T=(&03)) CANNOT BE CLOSED DUE TO DMS ERROR (DMS(&04))
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
(&04):DMS error code
The library-element cannot be closed.
For more detailed information about the DMS error,
enter /HELP-MSG-INFORMATION command.
SSM3245
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3245 *LIB-ELEM(L=(&00),E=(&01)(V=(&02)),T=(&03)) CANNOT BE CLOSED DUE TO PLAM ERROR (PLA(&04))
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
(&04):PLAM error code
The library-element cannot be closed.
For more detailed information about the PLAM error,
enter /HELP-MSG-INFORMATION command.
SSM3250
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3250 THE SWITCHING FROM DISK TO TAPE CANNOT BE DONE DUE TO PLAM ERROR (PLA(&00)). THE SYSTEM FILE IS REASSIGNED TO *PRIMARY
Meaning
For more information about the PLAM error,
enter /HELP-MSG-INFORMATION command.
SSM3252
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3252 SYSTEM ERROR DURING THE ASSIGNMENT OF THE FILE ON TAPE
SSM3254
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3254 INSUFFICIENT SPACE ON DISK FOR THE *LIB-ELEM(L=(&00),E=(&01)(V=(&02)), T=(&03))
Meaning
(&00):library name
(&01):element name
(&02):version of the element
(&03):type of the element
Disk saturation.
SSM3255
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3255 THE LIBRARY-ELEMENT WILL BE COPIED AND EXTENDED ON TAPE UNDER THE NAME '(&00)'
Meaning
(&00):tape file name
The library-element is saved on a tape file.
SSM3256
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3256 DO YOU WANT TO COPY AND EXTEND THE LIBRARY-ELEMENT ON TAPE UNDER THE NAME '(&00)' OR TO CONTINUE ON *PRIMARY ? REPLY (T=TAPE,M=MBK,P=*PRIMARY,N=NO)
Meaning
(&00):tape file name.
The library-element can be saved on a tape file.
Response
T : A tape is desired.
M : A MBK is desired.
P : The system file is reassigned to *PRIMARY.
N : The system file is reassigned to *DUMMY.
SSM3260
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3260 'FILE' PARAMETER ONLY AVAILABLE FOR DMS FILES
SSM3280
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3280 AN ERROR OCCURRED DURING THE /COPY-SYSTEM-FILE COMMAND PROCESSING
SSM3282
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3282 THE SYSTEM FILE IS NOT *PRIMARY. COMMAND REJECTED
Meaning
Only a primary system file can be copied with
the /COPY-SYSTEM-FILE command.
SSM3283
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM3283 SYSTEM FILE IS EMPTY. COMMAND IGNORED
Meaning
A /COPY-SYSTEM-FILE command has been entered for a system
file which is currently empty.
SSM3284
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SSM3284 DMS ERROR (DMS(&00)) DURING PROCESSING ON FILE (&01)
Meaning
(&00) : DMS error code
(&01) : file name on which error occurred
An error occurred during /COPY-SYSTEM-FILE
command processing.
If possible, the system file involved in the command
is reused.
Otherwise, a new primary system file is created.
SSM4000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4000 ENTER OR PROCEDURE FILE IS NOT OF TYPE SAM OR ISAM. COMMAND REJECTED
Meaning
The enter or procedure file has to be a SAM or ISAM file. If not so the
command will
be rejected.
SSM4001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4001 ENTER OR PROCEDURE FILE RECORD FORMAT IS NOT OF VARIABLE LENGTH. COMMAND REJECTED
Meaning
The record type of the enter or procedure file is not of variable length,
and
therefore the command is rejected.
SSM4002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4002 DELETE OPTION IGNORED FOR MEMBER OF LMS-LIBRARY. COMMAND PROCESSING CONTINUED
Meaning
LMS library members cannot be deleted with option DELETE=YES of the
/ENTER-JOB command. The operand will be ignored and the processing
of the command continues.
SSM4003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4003 INVALID LENGTH OF THE FIRST COMMAND IN ENTER OR PROCEDURE FILE. COMMAND REJECTED
Meaning
The length of the first command in the specified file is too long due to
the restriction of command continuation or record contains nothing but
the isam key.
SSM4005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4005 INVALID FORMAT OF THE FIRST COMMAND IN ENTER OR PROCEDURE FILE. COMMAND REJECTED
Meaning
The leading slash in a continuation record of the first command is
missing in the specified file.
SSM4006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SSM4006 ACCESS TO ENTER OR PROCEDURE FILE '(&00)' IN ERROR. DMS ERROR CODE '(&01)'. COMMAND REJECTED. DMS ERROR: /HELP-MSG-INFORMATION DMS(&01)
Meaning
The data management system has detected an error when accessing
the enter or procedure file.
Therefore the command will be rejected.
&00 : Name of the enter or procedure file.
&01 : DMS error code.