Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPRREVI COMP=SPRMF,VERS=001,DATE=940922,COMPNR=00000001
SPR0001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0001 PROGRAM NOT DEFINED IN SDF. PROGRAM ABORTED
Meaning
PRMPRES program not defined in the PRMPRES syntax file. The
statements were rejected.
SPR0002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0002 SDF NOT LOADED, PROGRAM ABORTED
SPR0003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0003 INTERNAL ERROR '(&00)' WITH SYSTEM INTERFACE '(&01)'. COMMAND ABORTED
Meaning
(&00) return code from interface standard header
(&01) system interface name
SPR0004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0004 IMPORT ALL PRINT RESOURCES FROM FILE '(&00)' INTO LIBRARY '(&01)', REPLY (0/ETX=YES, 2=NO)
Meaning
(&00) is a printer control file name
(&01) is a print resources library name
An end user has requested to open an old printer control
file of SPOOL by PRM. The user is asked whether the import
request may start in order to migrate the old file into a
new print resources library type and organization.
Response
Answer : 0 : The migration may take place (default)
2 : No migration, action withdrawn
SPR0005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0005 FORCE THE PRINT RESOURCES LIBRARY '(&00)' TO BE CLOSED
Meaning
(&00) is the current print resources library name
A new request to open a print resources library has been
entered by the end user. The previous print resources
library is closed.
SPR0006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0006 NO PRINT RESOURCES LIBRARY CURRENTLY OPENED. ACTION NOT PERFORMED
Response
Open a library in read mode if you only want to look at the
information contained. Open it in update mode if you want to
modify its contents : ADD,MODIFY,IMPORT,CONVERT,COPY, ... .
SPR0007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0007 DMS ERROR CODE '(&00)' WHILE OPENING THE PRINT RESOURCES LIBRARY '(&01)'. IN SYSTEM MODE : HELP-MSG DMS(&00)
Meaning
(&00) DMS error code
(&01) Library name (PRfile)
SPR0008
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0008 THE LIBRARY '(&00)' IS OPENED IN READ MODE; REQUEST '(&01)' IN THIS LIBRARY ARE PROHIBITED
Meaning
(&00) DMS pathname
(&01) 'REMOVE', 'CONVERT', 'IMPORT', 'ADD', 'MODIFY' OR 'COPY'
Remove, convert, import, add, modify and copy requests is
prohibited.
Response
Reopen the current library in update.
SPR0009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0009 NOT ENOUGH PRIVILEGE TO PERFORM THIS REQUEST. ACTION WITHDRAWN
Meaning
An end user has requested an operation on a print resources
library that is not allowed for him according to its library.
SPR0010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0010 THE PRINT RESOURCES LIBRARY '(&00)' BEING OPENED DOES NOT MATCH A PRFILE'S ATTRIBUTES OR HAS BEEN DAMAGED
Meaning
(&00) filename
The DMS characteristics of the file being opened do not
fit with the prfile ones, or the internal identification of
a prfile has been corrupted or damaged.
SPR0011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0011 THE ADDRESS DOES NOT CORRESPOND TO A LIBRARY API SPECIFICATION
SPR0012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0012 THE ADDRESS DOES NOT CORRESPOND TO AN OBJECT API SPECIFICATION
SPR0013
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0013 DSSM FAILURE : PRMMAN SUB-SYSTEM NOT AVAILABLE. PROGRAM ABORTED
Meaning
The PRMMAN subsystem is temporarily not available in delete
or hold status, or is not created or not connected, or is not
defined in the system catalog.
SPR0014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0014 PRMMAN ERROR CODE '(&00)', '(&01)', '(&02)' OCCURRED, ACTION WITHDRAWN
Meaning
(&00) PRMMAN error code subcode2
(&01) PRMMAN error code subcode1
(&02) PRMMAN error code maincode
All return codes excepted DMS error are here explained;
cfr EIS PRM API
(&00) subcode2 : functional unit that returns the error code
00 : PRM Validation Interface
01 : PRM Library Class Management
02 : PRM Page Description Class Management
03 : PRM Utility Tools
04 : PRM Record Management
05 : PRM Initialization For Manager Part
06 : PRM Font Class Management
07 : PRM Image Class Management
08 : PRM Code Translation Class Management
09 : PRM Preform Class Management
(&01) subcode1
00 : Successful Processing
01 : Syntax Error
20 : Internal Error
40 : Correct and Retry
43 : DMS Error Return Code
(&02) maincode
0000 : Request successfully performed
0001 : - Invalid action value
- Unallowed action
0002 : - Invalid object value
- Not enough privilege
0003 : Invalid source library type value
0004 : - Invalid target library type value
- Data not compliant with definition
0005 : - Invalid library open-mode value
- Resource already opened
0006 : Invalid resource type value
0007 : Invalid resource new type value
0008 : Invalid printer-model type value
0009 : - Invalid printer-model new type value
- Resource not found
000A : Invalid information value
000B : Invalid overwrite value
000C : - Invalid printer-model open-mode value
- Buffer too short
000D : - Inconsistency between the request
and the given parameters
- Buffer full
000E : - Invalid resource name
- Cannot transform general-loop
0011 : Invalid source library type
0012 : Invalid target library type
0014 : File descriptor not found
0015 : Object descriptor not found
0016 : Resource already existing
0018 : No resource handle can be given
0019 : Invalid resource open mode
001A : Library must be opened in update
001C : Resource handle does not correspond to
resource indicator
001D : Resource already opened in update
001E : Resource already opened
001F : Resource must have been opened in update
0020 : Resource not opened
0021 : Memory request error
0022 : Memory release error
0023 : PRM object type not supported
0024 : Resource type not supported in LIBM
0025 : Not a PRfile or file damaged
0026 : Library not opened
0027 : Not a library handle
0028 : Library handle does not match library
identification
0029 : No TOC action before OPEN a library
002A : Input library type not supported for import
002B : output library type not supported for import
002C : Length of data greater than length specifications
in parameter list
002D : maximum 200 bytes comments
002E : Invalid device type
0034 : Corrupted or damaged
0035 : - Userid not obtained
- Referred soft-font not found in PRFILE
0036 : - Bad header in call parameter list
- Referred macro not found in PRFILE
0037 : Bad user buffer address
0038 : Bad information part address
0039 : Bad PRM handle
003A : Bad Resource handle
003B : Bad source library handle
003C : Bad target library handle
003D : Information part address not given with
object = library or resource
003E : Problem with privilege check
0040 : Resource must exist before adding comments
SPR0015
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0015 NOT ENOUGH MEMORY, PROGRAM ABORTED
Meaning
Due to an insufficiency of memory in the system, PRM has been aborted.
SPR0016
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0016 CANCEL OF '(&00)' REQUEST
Meaning
(&00) action being cancelled
The end user has requested that the current action must be terminated.
SPR0017
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0017 FOR THE RESOURCE TYPE '(&00)' SPECIFIED NAME '(&01)' IS INVALID
Meaning
(&00) type of the resource
(&01) name of the resource
The name of a print resource must be conform to the
following conventions
- BAND-IDENTIFICATION : up to 4 chars <$#@;A-Z;0-9>
- CHARACTER-IMAGE : up to 3 chars <$#@;A-Z;0-9>
- TRANSLATION-TABLE : up to 8 chars <$#@;A-Z;0-9>
- LOOP : up to 3 chars <$#@;A-Z;0-9>
- GENERAL-LOOP : up to 8 chars <$#@;A-Z;0-9>
- FONT : up to 3 chars <$#@;A-Z;0-9>
- FONT-POOL : up to 4 chars <$#@;A-Z;0-9>
- FORMS-OVERLAY-BUFFER : up to 4 chars <$#@;A-Z;0-9>
- PREFORM : up to 4 chars <$#@;A-Z;0-9>
SPR0018
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0018 PRINT RESOURCE '(&00)' OF '(&01)' TYPE FOR '(&02)' PRINTER MODEL DOES NOT EXIST IN THE LIBRARY
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated to the resource
SPR0019
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0019 DMS ERROR '(&00)' WHILE PROCESSING PRINT RESOURCE '(&01)' OF '(&02)' TYPE ASSOCIATED TO '(&03)' PRINTER MODEL IN SYSTEM-MODE; HELP-MSG DMS(&00)
Meaning
(&00) DMS error code
(&01) name of the resource
(&02) type of the resource
(&03) printer model associated
SPR0020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0020 NO PRINT RESOURCE CURRENTLY ASSOCIATED
SPR0021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0021 OBJECT TYPE NOT SUPPORTED BY THIS FUNCTIONAL UNIT
SPR0022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0022 IMPORT '(&00)' OF TYPE '(&01)' AND MODEL '(&02)' FROM '(&03)' INTO '(&04)'? REPLY (0/ETX=YES, 1=SKIP, 2=TERMINATE)
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
(&03) source file name
(&04) target file name
Response
Answer : 0 : The transfer may take place (default)
1 : This resource is not transferred
2 : Terminate current processing
SPR0023
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0023 ERROR OCCURRED DURING THE '(&00)' REQUEST OF THE PRINT RESOURCE '(&01)' OF TYPE '(&02)' AND WITH PRINTER MODEL '(&03)' ASSOCIATED. REPLY (1=CONTINUE, 2=TERMINATE)
Meaning
(&00) the action processed
(&01) name of the resource
(&02) type of the resource
(&03) printer model associated to the resource
Response
Answer : 1 : Continue however with next resource if any (default)
2 : Terminate current processing
SPR0024
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0024 PRINT RESOURCE WITH NAME '(&00)' OF TYPE '(&01)' AND WITH PRINTER MODEL '(&02)' ASSOCIATED DOES NOT MATCH THE DEFINITION OR HAS BEEN DAMAGED
Meaning
(&00) name of the print resource
(&01) type of the print resource
(&02) printer model associated to the print resource
WRITING : The resource does not match the definition
awaited for this kind of resource
READING : The resource to read has been damaged so it is
impossible to read this resource.
SPR0025
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0025 INVALID ACTION TYPE; ONLY ADD, MODIFY OR SHOW ARE TREATED IN THIS FUNCTION. INTERNAL ERROR. PROGRAM ABORTED
SPR0026
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0026 ACTION SEQUENCE ERROR
Meaning
An unforeseen event has been detected by a functional unit
of PRM, which cannot be treated yet or not at all.
SPR0027
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0027 NO IMPLEMENTATION DETAILS MAY BE RETURNED FOR THE PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)'
Meaning
(&00) the name of the resource
(&01) the type of the resource
(&02) the printer model associated
It is not allowed to provide implementation details as
SDF statements for this kind of resources.
SPR0028
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0028 REMOVE PRINT RESOURCE WITH NAME '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)' ASSOCIATED FROM LIBRARY '(&03)'? REPLY (0/ETX=YES,1=SKIP, 2=TERMINATE)
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated to the resource
(&03) library name
Response
Answer : 0 : Remove may take place (default)
1 : This resource is not removed, process the next one
2 : Terminate current processing
SPR0029
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0029 AT LEAST ONE '(&00)' REFERS TO THIS RESOURCE '(&01)' OF TYPE '(&02)' WITH PRINTER MODEL '(&03)' ASSOCIATED. RESOURCE NOT REMOVED
Meaning
(&00) the referring font-pool
(&01) name of the resource
(&02) type of the resource
(&03) printer model associated to the resource
A font cannot be removed when it is referred to by a hp-font-pool.
SPR0030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0030 INTERNAL ERROR ON '(&00)'. PROGRAM ABORTED
Meaning
(&00) GC name
SPR0031
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0031 INVALID 'PREFORM' DATA LENGTH
Meaning
The length of the entered PREFORM - after conversion to the hexadecimal
format - is equal to zero or greater than 256 characters.
Response
Correct the input.
SPR0032
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0032 MISSING EBCDIC STRING TERMINATOR ')'
Meaning
An EBCDIC string in the data is not terminated with the ')' separator.
SPR0033
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0033 INVALID HEXADECIMAL CODE AT POSITION '(&00)'
Meaning
(&00) position in the string
SPR0034
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0034 UNEXPECTED DATA FOLLOWS THE 'PREFORM' DATA TERMINATOR
Meaning
The preform data terminating character is followed by more
preform data.
SPR0035
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0035 PRINT RESOURCE '(&00)' OF TYPE '(&01)' WITH '(&02)' PRINTER MODEL ASSOCIATED ALREADY EXISTS IN LIBRARY. RESOURCE NOT REPLACED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
The actual write mode setting does not allow to replace the print
resource.
SPR0036
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0036 ERROR OCCURRED DURING THE '(&00)' REQUEST OF THE PRINT RESOURCE '(&01)' OF TYPE '(&02)' WITH PRINTER MODEL '(&03)' ASSOCIATED
Meaning
(&00) action type
(&01) name of the resource
(&02) type of the resource
(&03) printer model associated
SPR0037
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0037 NO LINE DESCRIPTOR DEFINED IN THE LOOP
SPR0038
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0038 SPECIFIED LINE NUMBER GREATER THAN LOOP LENGTH. THE LAST LINE OF THE LOOP IS '(&00)'
Meaning
(&00) number of the last line of the loop
The specified line number value given trespasses the loop length.
SPR0039
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0039 NO PRINT RESOURCE OBJECTS ARE MATCHING THE SELECTION RESOURCE NAME '(&00)' OF '(&01)' TYPE AND WITH PRINTER MODEL '(&02)' ASSOCIATED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
No print resource objects are matching the selection with
the parameter values given. The empty selection may also be
caused by the access-date values in conjunction with the
resource name, object type and printer model parameter
values.
If you want to make a selection by using the access date
parameter, be sure that the chosen date range covers well the
resources you want to process. Indeed, a range non covering
any of the resources of the current open PRfile or a range
of dates composed by a from-date greater than the to-date
generates this message.
Response
Propose another selection criterions or propose the same
selection values with a more appropriate range of dates.
SPR0040
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0040 A GENERAL LOOP MAY NOT BE CONVERTED INTO A ND LOOP
SPR0041
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0041 CHANNEL 1 FORCED IN THIRD LINE DESCRIPTOR OF CONVERTED LOOP
Meaning
A channel one has been forced in the third line of the
converted loop. The process ended normally and the loop
has been created.
SPR0042
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0042 THERE IS STILL A GAP OF '(&00)'/120 OF INCH THAT CANNOT BE COVERED AND THE CONVERSION RULE IS FULL-FIT
Meaning
(&00) size of the gap in 120th of inch
SPR0043
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0043 TRYING TO ADJUST THE '(&00)' LOOP LENGTH TO A MULTIPLE OF 6LPI HAS FAILED
Meaning
(&00) the type of the loop; HP or LP
SPR0044
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0044 THE PRODUCED '(&00)' LOOP HAS MORE OR LESS LINE DESCRIPTORS THAT THIS IS ALLOWED
Meaning
(&00) the type of the loop; HP or LP
SPR0045
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0045 THE VERTICAL DENSITY OF ALL LINE DESCRIPTORS FOR A LP LOOP MUST BE EITHER 6 LPI FOR ALL OF THEM OR 8 LPI FOR ALL OF THEM
SPR0046
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0046 VERTICAL DENSITY OF PARAGRAPH '(&00)' NOT SUPPORTED FOR A '(&01)' LOOP
Meaning
(&00) name of the paragraph
(&01) type of the loop; HP or LP
SPR0047
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0047 UNABLE TO COVER THE GAP BETWEEN START OF GENERAL LOOP AND PARAGRAPH '(&00)' WITH THE PERMISSIBLE VERTICAL DENSITY OF A '(&01)' LOOP
Meaning
(&00) name of the paragraph
(&01) type of the loop; HP or LP
SPR0048
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0048 UNABLE TO COVER THE GAP BETWEEN PARAGRAPH '(&00)' AND END OF GENERAL-LOOP WITH THE PERMISSIBLE VERTICAL DENSITY OF A '(&01)' LOOP
Meaning
(&00) name of the paragraph
(&01) type of the loop; HP or LP
SPR0049
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0049 UNABLE TO COVER THE GAP BETWEEN PARAGRAPH '(&00)' AND PARAGRAPH '(&01)' WITH THE PERMISSIBLE VERTICAL DENSITY OF A '(&02)' LOOP
Meaning
(&00) name of the first paragraph
(&01) name of the second paragraph
(&02) type of the loop; HP or LP
SPR0050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0050 INVALID ACTION TYPE; ONLY MODIFY OR SHOW ARE TREATED IN PRMIMGP FUNCTION. INTERNAL ERROR. PROGRAM ABORTED
SPR0051
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0051 THE MAXIMUM ALLOWED LP LOOP LENGTH IS 31 INCHES '(&00)'
Meaning
(&00) decimal part of the length :
- 1/2 when the default vertical density is 8 lpi
- 5/6 when the default vertical density is 6 lpi
SPR0052
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0052 FOR A LOOP WITH 8 LPI AS DEFAULT VERTICAL DENSITY, THE NUMERATOR OF THE DECIMAL PART MUST BE 0 OR 3
SPR0053
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0053 MODEL AND PRINT RESOURCE NAMES MUST BE DIFFERENT
Meaning
When processing a add-print-resources by-model, the name
of the resource to add must be different from the one of
the chosen resource model.
SPR0054
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0054 '(&00)' LOOP LENGTH NOT IN PERMISSIBLE RANGE
Meaning
(&00) type of the loop
for a LP loop : 1 inch < loop length =< 31 inches 5/6
for a HP loop : 3 inches < loop length =< 17 inches max.
Response
Give a value matching the limits.
SPR0055
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0055 SPECIFIED CHANNEL NOT IN PERMISSIBLE RANGE : 0 to 12
Meaning
Values must be in range : 0 to 12. 0 means no channel.
Response
Give a value matching the limits.
SPR0056
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0056 SPECIFIED VERTICAL DENSITY MUST BE EITHER 6 OR 8 LPI FOR A LP LOOP
Meaning
A LP loop may only support line descriptors with either
6 lpi or 8 lpi as vertical density.
Response
Specify 6 or 8 lpi.
SPR0057
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0057 PRINT RESOURCE '(&00)' OF TYPE '(&01)' WITH '(&02)' PRINTER MODEL ASSOCIATED NOT SAVED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
SPR0058
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0058 DMS ERROR '(&00)' OCCURRED DURING THE (&01)' REQUEST OF THE PRINT RESOURCE '(&02)' OF TYPE '(&03)' WITH PRINT RESOURCE '(&04)' ASSOCIATED
Meaning
(&00) error code
(&01) action processed
(&02) type of the resource
(&03) printer model associated
(&04) name of the resource
SPR0059
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0059 RESOURCE '(&00)' OF TYPE '(&01)' WITH PRINTER MODEL '(&02)' ASSOCIATED ALREADY EXISTS IN LIBRARY. RESOURCE NOT OVERWRITTEN
Meaning
(&01) name of the resource
(&02) type of the resource
(&03) printer model associated
SPR0060
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0060 PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)' ASSOCIATED ADDED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
SPR0061
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0061 AT LEAST A CHANNEL 1 MUST BE DEFINED IN A LOOP, WHATEVER ITS ASSOCIATED PRINTER MODEL
SPR0062
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0062 THE LOOP LENGTH IS NOT A MULTIPLE OF 6LPI
SPR0063
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0063 NUMBER OF LINE DESCRIPTORS IS MORE THAN 255 OR NULL
Meaning
The LP loop must contain at least one line descriptor
but can not contain more than 255 line descriptors.
SPR0064
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0064 ERROR '(&00)' OCCURRED DURING THE '(&01)' REQUEST OF THE PRINT RESOURCE '(&02)' OF TYPE '(&03)' WITH PRINTER '(&04)' ASSOCIATED
Meaning
(&00) error code
(&01) action processed
(&02) name of the resource
(&03) type of the resource
(&04) printer associated
SPR0065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0065 UNSUPPORTED FRACTION OF INCH FOR THE LOOP LENGTH
Meaning
The numerator of the decimal part of a loop length must be
in the range 0 to 5. It represents additional fraction of
inch in 6 lpi to the loop length.
Response
Give a value matching the limits
SPR0066
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0066 SPECIFIED PARAGRAPH NAME IS WRONG
Meaning
A paragraph name must have a length of at least one
character and a maximum length of eight characters. The
characters allowed are the alphanumerics <$#@;A-Z;0-9>.
Response
Propose another name.
SPR0067
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0067 SPECIFIED GENERAL-LOOP LENGTH NOT IN PERMISSIBLE RANGE
SPR0068
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0068 UNSUPPORTED FRACTION OF INCH FOR THE GENERAL-LOOP LENGTH
Meaning
The allowed denominator values for the fraction of inch
6, 8, 10, 12 or 24 lpi.
Response
Choose one of the allowed denominator values for the fraction
of inch.
SPR0069
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0069 UNSUPPORTED FRACTION OF INCH FOR THE PARAGRAPH '(&00)'
Meaning
(&00) name of the paragraph
The allowed values for the denominator of the fraction of inch
are 6,8,10,12 or 24 lpi.
Response
Choose one of the allowed values for the fraction of inch.
SPR0070
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0070 UNSUPPORTED VERTICAL DENSITY IN A PARAGRAPH DEFINITION
Meaning
The supported vertical densities for a paragraph definition
are 6, 8, 10, 12 or 24 lpi.
Response
Choose one of the allowed values for the vertical density.
SPR0071
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0071 PARAGRAPH '(&00)' DEFINITION EXCEEDS THE GENERAL-LOOP LENGTH
Meaning
(&00) paragraph name
The integer-part specified in the new paragraph exceeds
the page-length of the general-loop.
Response
Give a new definition with an integer-part taking count
of the page-length.
SPR0072
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0072 PARAGRAPH '(&00)' OVERLAYS DEFINITION OF OTHER PARAGRAPHES
Meaning
(&00) paragraph name
The new paragraph overlaps paragraphs previously defined.
Response
Process a show of the general-loop to have a correct image
of the general-loop structure and redefine the paragraph.
SPR0073
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0073 NUMBER OF PARAGRAPHES IS MORE THAN 256 OR NULL
SPR0074
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0074 PARAGRAPH '(&00)' IS DEFINED TWICE
Meaning
It is unallowed to define a new paragraph with a name
already used for another paragraph in the same general-loop.
Response
Propose a new name not used in the specified general-loop.
SPR0075
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0075 NO LINE NUMBER IN PARAGRAPH DEFINITION '(&00)'
Meaning
(&00) name of the paragraph
A paragraph must be defined with a number of lines stricly greater
than zero.
SPR0076
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0076 FOR A HP-LOOP, THE MAXIMUM LENGTH IS 17 INCHES AND THE MINIMUM LENGTH IS 3 INCHES
SPR0077
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0077 SPECIFIED VERTICAL DENSITY MUST BE 6,8,10,12 OR 24 LPI FOR A HP LOOP
Meaning
The allowed values for the vertical density of a hp loop
are 6, 8, 10, 12 or 24 lpi.
Response
Choose a vertical density in this set of values.
SPR0078
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0078 NO PARAGRAPH DEFINED IN THE CURRENT GENERAL-LOOP
Meaning
A general-loop must have at least one paragraph.
Response
Define at least one paragraph for the specified general-loop.
SPR0079
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0079 PARAGRAPH '(&00)' DOES NOT EXIST
Meaning
(&00) name of the paragraph
The specified name given for a paragraph to modify, show or
or remove does not correspond to any paragraph existing in
the general-loop.
SPR0080
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0080 SPECIFIED LINE NUMBER NOT IN PERMISSIBLE RANGE
Meaning
For a LP loop, the range for the line number is 1..1024.
For a HP loop, the range for the line number is 1..408.
SPR0081
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0081 WARNING : SPECIFIED LINE RANGE SWAPPED
Meaning
The from-line and to-line values have been swapped,
because the from-line was greater than the to-line. The
process is not interrupted.
SPR0082
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0082 THE CHOSEN LINE RANGE AND SPECIFIED VERTICAL DENSITY CAUSE VIOLATION OF LOOP BOUNDARY
Meaning
The specified vertical density combined with the line
ranges cause the violation of the loop length.
Response
To avoid this problem, you can :
- choose the same line range with a vertical density
lower than the previous one;
- reduce the line range and keep the same vertical density;
- combine these two solutions.
SPR0083
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0083 DUE TO THE NEW SETTINGS FOR THE SPECIFIED LINE RANGE, THE LAST LINE DESCRIPTORS HAVE BEEN LOST OR TRUNCATED TO MATCH THE LOOP LENGTH
Meaning
As the new vertical density is greater than the previous
one, the size of the line range concerned by the
modification is greater. So to match the loop length the
last lines of the loop have been lost or truncated. The
process is not interrupted.
SPR0084
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0084 DUE TO THE SETTINGS FOR THE SPECIFIED LINE RANGE, THE LAST LINE DESCRIPTOR VERTICAL DENSITY HAS BEEN MODIFIED TO MATCH THE LOOP LENGTH
Meaning
As the new vertical density is lower than the previous one,
the size of the line range concerned by the modification is
smaller. So to match the loop length, as a gap has occurred
at the end of the loop, a set of line descriptors has been
calculated to fit this gap. The process is not interrupted.
SPR0085
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0085 UNABLE TO COVER THE GAP AT THE END OF THE LOOP CAUSED BY THE NEW SETTINGS FOR THE SPECIFIED LINE RANGE
Meaning
A gap has occurred at the end of the loop and no
combination of the vertical densities (6,8,10,12,24 lpi)
could cover this gap. Process interrupted.
Response
Propose another setting.
SPR0086
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0086 PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)' ASSOCIATED MODIFIED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
SPR0087
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0087 PRINTER RESOURCE '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)' ASSOCIATED IS MODIFIED WITH NEW NAME '(&03)'
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
(&03) new name of the resource
SPR0088
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0088 ONLY ONE FORMS-OVERLAY-BUFFER WITH A GIVEN NAME MAY BE IMPORTED FROM A FGSFILE
Meaning
A fgsfile only contains data concerning one forms overlay
buffer. When importing the data of a fgsfile, you must
specify a forms overlay buffer resource type and give a
correct fob name under which the data will be saved.
SPR0089
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0089 THE CHARACTER STRING IS NOT FOUND IN THE ESCAPE SEQUENCE
SPR0090
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0090 THE HP-CHARACTER '(&00)' TO REMOVE DOES NOT EXIST IN THE FONT
Meaning
(&00) hp-character code
SPR0091
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0091 NO FONT ARE DEFINED IN THE HP-FONT-POOL '(&00)'
Meaning
(&00) hp-font-pool name
At least one font must be defined in a hp-font-pool. So
when adding a new pool, at least one font must be defined
and when removing fonts from a pool, at least one font must
remain in the pool.
SPR0092
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0092 THE MINIMAL VALUE ALLOWED FOR THE LENGTH OF A HP LOOP IS 3 INCHES AND THE MAXIMAL VALUE IS 17 INCHES
Meaning
The minimal length for a hp loop is 3 inches and the
maximal length is 17 inches. When 17 inches is chosen,
the decimal-part must be set to 0.
Response
Redefine the length for the loop you want to create so
it matches these limits.
SPR0093
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0093 THE HP LOOP IS EMPTY
Meaning
A HP loop must contain at least one line-descriptor
tool-box to create at least one line-descriptor.
Response
Use the modify-line-descriptor statement of the loop.
SPR0094
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0094 THE NUMBER OF LINE DESCRIPTORS IS MORE THAN 408 OR NULL
SPR0095
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0095 THE FONT '(&00)' TO '(&01)' DOES NOT EXIST IN THE HP-FONT-POOL '(&02)'
Meaning
(&00) font name
(&01) action requested for the font
(&02) hp-font-pool name
The actions are ADD, REMOVE and REPLACE.
SPR0096
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0096 MORE THAN 64 FONTS HAVE BEEN DEFINED FOR THE HP-FONT-POOL '(&00)'
Meaning
(&00) hp-font-pool name
A hp-font-pool can contain up to only 64 fonts.
SPR0097
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0097 *ALL is not a valid name when importing a FORMS-OVERLAY-BUFFER from a FGSFILE type or TRANSFILE type, and when importing a HP Font from a TRANSFILE type.
Meaning
As a FGSFILE contains only one forms-overlay-buffer, it is not relevant
to use the value *all for the parameter object=*image.
As a TRANSFILE contains only one forms-overlay-buffer, it is not relevant
to use the value *all for the parameter OBJECT=*IMAGE.
As a TRANSFILE contains only one HP Font, it is not relevant
to use the value *all for the parameter OBJECT=*FONT.
SPR0098
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0098 PRINT RESOURCES OBJECTS MAY NOT BE COPIED ON THEMSELVES
Meaning
The resource(s) requested for the copy already exist(s) in
the target file and can not be replaced by itself
(themselves). The processing is interrupted.
SPR0099
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0099 THE CHARACTER CODE '(&00)' TO IMPORT DOESN'T EXIST IN THE FONT
Meaning
(&00) : the character code
The character code to import does not exist in the font from which this
character must be imported. Perform a show of this font to view its
cpntents.
SPR0100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0100 MODIFY-PRINT-RESOURCES ACTION CANCELLED. PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND WITH PRINTER MODEL '(&02)' ASSOCIATED NOT SAVED
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
A CANCEL-HP-FONT has been specified by the user. No data
are saved.
SPR0101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0101 ACTION NOT PERMITTED FOR THE MOMENT
Meaning
The action is not permitted for the moment because
the font tool-box is not accessible.
Response
Perform a ADD-PRINT-RESOURCES or a MODIFY-PRINT-RESOURCES
action to activate the tool-box.
SPR0102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0102 THE VERTICAL DENSITY '(&00)' IS INVALID
Meaning
(&00) vertical density value
The possible vertical density values are 6,8,10,12 and
24 lpi.
Response
Choose a vertical density in the allowed values.
SPR0103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0103 THE COLUMN VALUE '(&00)' GIVEN FOR HORIZONTAL DENSITY IS INVALID
Meaning
(&00) the column value
The column value to 'determine' the horizontal density must
be included between 2 and 40.
Response
Choose a correct value in the range.
SPR0104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0104 THE HP CHARACTER '(&00)' TO ADD ALREADY EXISTS IN THE FONT
Meaning
(&00) the hp character code
SPR0105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0105 THE HP CHARACTER '(&00)' TO EDIT DOES NOT EXIST IN THE FONT
Meaning
(&00) the hp character code
The HP-character to show or modify is not defined in the hp-font.
SPR0106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0106 ADD-PRINT-RESOURCES OR MODIFY-PRINT-RESOURCES ACTION CANCELLED. PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND WITH PRINTER MODEL '(&02)' ASSOCIATED NOT SAVED
Meaning
(&00) the name of the resource
(&01) the type of the resource
(&02) the printer model associated
SPR0107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0107 NO INFORMATIONS MAY BE RETURNED FOR THE PRINT RESOURCE '(&00)' OF TYPE '(&01)' AND PRINTER MODEL '(&02)' ASSOCIATED
Meaning
(&00) the name of the resource
(&01) the type of the resource
(&02) the printer model associated
Only information=*summary is possible for a show of these resources.
SPR0108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0108 PROGRAM PRM VERSION '(&00)' STARTED
Meaning
(&00) version of PRM
SPR0109
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0109 THE CENTER HORIZONTAL VALUE FOR THE ALIGNMENT IS INVALID
Meaning
The allowed value must be taken in the range 1..40.
SPR0110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0110 THE CENTER VERTICAL VALUE FOR THE CHARACTER ALIGNMENT IS INVALID
Meaning
The allowed value must be taken in the range 1..40.
SPR0111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0111 THE NUMBER GIVEN FOR *UP, *DOWN, *LEFT OR *RIGHT OPERAND FOR THE CHARACTER ALIGNMENT IS INVALID
Meaning
The value must be taken in the range 1..39.
SPR0112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0112 INVALID ROTATION VALUE
Meaning
The possible rotation values are 0, 90, 180 or 270.
SPR0113
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0113 THE FROM-LINE RANGE VALUE '(&00)' IS INVALID
Meaning
(&00) from-line range value
The from-line range value must be taken in the range 1..40.
SPR0114
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0114 THE TO-LINE RANGE VALUE '(&00)' IS INVALID
Meaning
(&00) to line range value
The to-line range value must be taken in the range 1..40.
SPR0115
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0115 THE FROM-COLUMN RANGE VALUE '(&00)' IS INVALID
Meaning
(&00) from-column range value
The from-column range value must be taken in the 1..40.
SPR0116
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0116 THE TO-COLUMN RANGE VALUE '(&00)' IS INVALID
Meaning
(&00) to-column range value
The to-column range value must be taken in the range 1..40.
SPR0117
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0117 THE ZOOM LINE VALUE '(&00)' IS INVALID
Meaning
(&00) the zoom line value
The possible zoom line values are 125, 135, 150, 200, 80, 75, 65 or 50.
SPR0118
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0118 THE ZOOM COLUMN VALUE '(&00)' IS INVALID
Meaning
(&00) the zoom column value
The possible zoom column values are 125, 135, 150, 200, 80, 75, 65 or 50.
SPR0119
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0119 THE HP CHARACTER '(&00)' TO BE OVERLAIED DOES NOT EXIST IN THE FONT '(&01)'
Meaning
(&00) the hp character code
The font used to obtain another character code does not
contain the given hp-character code.
SPR0120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0120 THE HP-FONT IS EMPTY
Meaning
No hp character defined in the font. The font is not saved.
SPR0121
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0121 THE HORIZONTAL DENSITY '(&00)' IS INVALID
Meaning
(&00) the vertical density value
The possible horizontal density values are 6, 10, 12, 15 or 20 cpi.
SPR0122
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0122 THE SPECIFIED FILE NAME '(&00)' DOES NOT FOLLOW THE NAMING CONVENTION TO DETERMINE AN OLD SPOOL USER PARAMETER FILE OF TYPE HPFILE OR NDFILE. THE MIGRATION PROCESS DOES NOT TAKE PLACE
Meaning
(&00) the file name
SPR0123
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0123 DMS ERROR CODE '(&00)' WHILE OPENING THE PRINT RESOURCES LIBRARY SPECIFIED BY LINKNAME. IN SYSTEM MODE : HELP-MSG DMS(&00)
Meaning
(&00) DMS error code
SPR0124
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0124 FORCE THE PRINT RESOURCES LIBRARY '(&00)' TO BE REOPENED
Meaning
(&00) the print resources library name
SPR0125
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0125 ACCORDING TO THE NAMING CONVENTION OF THE OLD SPOOLFILE PRINTER CONTROL FILES, THERE IS NO USER RESOURCE FILE POSSIBLE FOR A SPOOLFILE LIBRARY TYPE. THE MIGRATION DOES NOT TAKE PLACE
SPR0126
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0126 A PRINT RESOURCES LIBRARY WITH NAME '(&00)' MAY ALREADY EXIST. IT MAY NOT BE CREATED
Meaning
(&00) the name of the print resources library
SPR0127
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0127 COPY '(&00)' OF TYPE '(&01)' AND MODEL '(&02)' FROM '(&03)' INTO '(&04)'? REPLY (0/ETX=YES, 1=SKIP, 2=TERMINATE)
Meaning
(&00) name of the resource
(&01) type of the resource
(&02) printer model associated
(&03) source file name
(&04) target file name
Response
Answer : 0 : The copy may take place (default)
1 : This resource is not copied
2 : Terminate current processing
SPR0128
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0128 PRM NORMALLY TERMINATED
SPR0129
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0129 PRM ABNORMALLY TERMINATED
SPR0130
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0130 THE REFERENCED FONT '(&00)' DOES NOT EXIST IN THE PRFILE. ACTION CANCELLED
Meaning
&00) the font name
SPR0131
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0131 ALL FONTS CAN NOT BE REMOVED FROM THE FONT-POOL
Meaning
At least one font must be defined in a font-pool.
SPR0132
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0132 The library '(&00)' does not match the specification of a '(&01)' type
Meaning
(&00) filename
(&01) NDFILE / HPFILE / SPOOLFILE / FGSFILE / TRANSFILE
The user has requested to open a ND, HP, SPool, FGS, or TRANS file,
but the characteristics of the file does not correspond to
the specified file type.
Response
Select a correct supported file.
SPR0133
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0133 THE LIBRARY SPECIFIED BY LINKNAME DOES NOT MATCH A PRFILE OR HAS BEEN DAMAGED
Response
Select a correct prfile.
SPR0134
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0134 Resources of type '(&00)' may not be imported from a '(&01)'
Meaning
(&00) resource type
(&01) SPOOLFILE / NDFILE / HPFILE / PCLFILE / TRANSFILE
Only specific resources types may be imported from a
SPOOLFILE, HPFILE, NDFILE, PCLFILE, TRANSFILE:
- for a SPOOLFILE : band-id, character-image, translation-
table, loop, preform
- for a HPFILE : loop, font, forms-overlay-buffer, hp-font-pool
- for a NDFILE : loop, font
- for a PCLFILE : macro, overlay, font, soft font
- for a NDFILE : macro, soft font, forms-overlay-buffer, font
Response
Correct resource type selection.
SPR0135
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0135 PROGRAM TERMINATION REQUESTED DURING TOOLBOX ACTIVATION. DO YOU WANT TO SAVE YOUR MODIFICATIONS ? (0/ETX=YES, 2=NO)
Meaning
A END statement has been detected inside a toolbox
processing. To save the modifications which have been made
in this tool box, the user must reply 0. The reply 2 will
correspond to a CANCEL statement followed by a END.
Response
Answer : 0 : save the modifications and quit the tool-box
2 : quit the tool-box without saving the modifications
SPR0136
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0136 THE SPECIFIED UNDERSCORE CODE '(&00)' DOES NOT EXIST IN THE ND FONT
Meaning
(&00) the underscore code
The underscore code specified by the user is not found in
the nd font to convert.
SPR0137
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0137 THE SPECIFIED GRAPHIC CHARACTER CODE '(&00)' DOES NOT EXIST IN THE ND FONT
Meaning
(&00) graphic character code
The graphic character code specified by the user is not
found in the nd font to convert.
SPR0138
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0138 IN A SHOW-HP-CHARACTER WITH SELECTION OF A LINE-RANGE, THE TO-VALUE MUST BE GREATER THAN THE FROM-VALUE
SPR0139
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0139 IF THE HP-CHARACTER HAS '(&00)' LPI AS VERTICAL-DENSITY, THE CHARACTER DRAW MUST BEGIN AT LINE '(&01)' AND END AT LINE '(&02)'
Meaning
(&00) vertical density
(&01) minimum line
(&02) maximal line
The lower and upper limits for the line-range according to
the possible vertical densities are the following
VERTICAL DENSITY MIN LINE MAX LINE
24 21 30
12 13 32
10 11 34
8 7 36
6 1 40
SPR0140
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0140 IF THE HP-CHARACTER HAS '(&00)' CPI AS HORIZONTAL-DENSITY, THE CHARACTER CAN BE DRAWNED UP TO COLUMN '(&01)'
Meaning
(&00) horizontal density
(&01) maximal column
The following table presents the combinations of
horizontal densities and maximum column values
HORIZONTAL DENSITY MAX COLUMN
6 40
10 24
12 20
15 16
20 12
SPR0141
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0141 NO CHARACTER DEFINED IN THE CURRENT FONT
Meaning
A hp font must have at least one character.
Response
Define at least one character for the current font.
SPR0142
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0142 WARNING : THE HP FONT '(&00)' IS NOT DEFINED IN THE PRFILE
Meaning
(&00) name of a hp font not defined in the font-pool
The hp font pool is composed of one or several hp fonts.
During the process of the SHOW-PRINT-RESOURCES command, a
validation is performed on the hp fonts existing. One or
several fonts do not exist in the prfile.
SPR0143
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0143 THE SHIFT NUMBER IS GREATER THAN THE NUMBER OF COLUMNS OF THE MATRIX
Meaning
In the change-hp-character-alignment *left(*right), the
given column number is greater than the number of columns
contained in the matrix.
SPR0145
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0145 THE CHARACTER CODE X'FF' OF THE ND-FONT IS RENAMED X'1F' IN THE HP-FONT
SPR0146
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0146 THE GIVEN SPACE CODE '(&00)' IS NOT DEFINED IN THE HP FONT. RESOURCE NOT SAVED
Meaning
(&00) space code
The character-code specified in the creation or the
modification does not exist in the font. The hp-font
generation or modification is impossible.
SPR0147
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0147 THE GIVEN UNDERSCORE CODE '(&00)' IS NOT DEFINED IN THE HP-FONT. RESOURCE NOT SAVED
Meaning
(&00) underscore-code
The character code specified for the space code, in the
creation or in the modification, does not exist in the font.
The hp-font generation or modification is impossible.
SPR0148
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0148 THE SAME CHARACTER CODE '(&00)' IS GIVEN FOR SPACE AND UNDERSCORE CODES
Meaning
(&00) character code
The code given for the space code must be different from
the code given for the underscore code.
SPR0149
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0149 THE NUMBER OF LINES GIVEN TO SPECIFY THE LP LOOP LENGTH MUST BE TAKEN IN THE RANGE (2..1024)
SPR0150
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0150 UNSUPPORTED NUMBER OF LINES VALUE. THE DECIMAL PART OF THE LENGTH FOR THE NEW LP LOOP IS NOT A MULTIPLE OF 6LPI
Response
Specify a number of lines for the length matching the
assumption of a decimal part being a multiple of 6lpi.
SPR0151
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0151 THE LENGTH OF THE GENERAL-LOOP TO CONVERT INTO A HP-LOOP IS GREATER THAN 17 INCHES WHICH IS THE UPPER LIMIT FOR A HP-LOOP LENGTH
Response
Choose or create a general-loop with a length not
trespassing the 17 inches limit.
SPR0152
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0152 WARNING : AT LEAST ONE HP-FONT-POOL REFERS TO THE RESOURCE '(&00)' OF TYPE HP-FONT AND WITH PRINTER MODEL HP ASSOCIATED
Meaning
(&00) the name of a font
The message is sent when a user tries to modify a hp-font
associated to at least one hp-font-pool.
SPR0153
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0153 THE CODE '(&00)' SPECIFIED FOR THE UNDERSCORE CODE IS ALREADY USED AS SPACE CODE IN THE ND FONT
Meaning
(&00) character-code
The underscore code given for the ND font conversion is
already defined as space code. They must be different.
SPR0154
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0154 OUTPUT OPERAND NOT PROCESSED DUE TO DMS ERROR ON REQUESTED OUTPUT FILE
SPR0155
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0155 THE SPECIFIED FROM-DATE IS GREATER THAN THE TO-DATE. PROCESS ABORTED
SPR0156
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0156 THE CONVERSION OF A LP LOOP HAVING A TOTAL LENGTH GREATER THAN 31 5/6 INCHES INTO A GENERAL-LOOP IS NOT ALLOWED
Meaning
- There are two ways to set the total length of a lp loop :
1. specify it in inches (with a maximum value of 31 5/6)
2. specify it by using the number of lines operand (which
refers to the number of line descriptors - with a maximum
value of 1024.
- If you determine the length by using the number of lines
operand, you have to know that 191 line descriptors with
a vertical density of 6lpi gives 31 5/6 inches, and that
252 line descriptors with a vertical density of 8lpi gives
31 3/6 inches, which are the upper length limits.
- So, if you create a lp loop by using the number of lines
and if you specify more than 191 lines (with 6lpi) or more
than 252 lines (with 8lpi), you'll create a valid lp loop
but which is not convertible.
SPR0157
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0157 THE LENGTH OF THE GENERAL-LOOP TO CONVERT INTO A LP-LOOP IS GREATER THAN 31 5/6 INCHES WHICH IS THE UPPER LIMIT FOR A LP-LOOP LENGTH
Response
Choose or create a general-loop with a length not
trespassing the 31 5/6 inches.
SPR0158
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0158 *ALL is not a valid value when importing a '(&00)' from a PCLFILE or TRANSFILE
Meaning
As a PCLFILE contains only one PCL object definition, it is not relevant
to use the value *ALL for the parameter OBJECT=*IMAGE or *FONT.
As a TRANSFILE may contain one PCL object definition, it is not relevant
to use the value *ALL for the parameter OBJECT=*IMAGE or *FONT.
SPR0159
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0159 The PCL font '(&00)' refers to a soft-font that does not exist in the current PRFILE
Meaning
(&00) specifies the name of the PCL font.
Response
Import or copy the softfont first in the current opened library.
SPR0160
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0160 The PCL overlay '(&00)' refers to a macro that does not exist in the current PRFILE.
Meaning
(&00) specifies the name of the PCL overlay.
Response
Import or copy the macro first in the current opened library.
SPR0161
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0161 Command processor returns error code '(&00)' for file assignement '(&01)'. In system mode : HELP-MSG (&00)
Meaning
(&00) CMD error code
(&01) filename
Response
No further information
SPR0162
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPR0162 The PCL '(&00)' resource with name '(&01)' is already present. The import of the PCL '(&02)' resource with name '(&03)' will not be performed.
Meaning
&(00) is OVERLAY or FONT
&(01) is the resource name
&(02) is MACRO or SOFT FONT
Importing a PCL macro or soft font from a TRANSFILE creates
automatically a PCL overlay or font reference,
provided the resource does not already exist when the write mode is
set to create.