Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPGCOPY Copyright (C) '(&00)' '(&01)' All Rights reserved
SPGLOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPGLOAD LLM '(&00)', Version '(&01)' of '(&02)' loaded from file '(&03)'
SPG000A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG000A Active paging files found on SF pubset '(&00)'. SMPGEN aborted
Meaning
The SF pubset '&00' is activated for paging and holds paging files.
Response
Deactivate paging files eventually (using /REDUCE-PAGING-AREA) and
repeat SMPGEN job.
SPG0001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0001 Internal error in SMPGEN. A serslog entry has been written
Response
Contact Your system administrator or customer support.
SPG0002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0002 Error at message output to '(&00)'
Meaning
(&00) = SYSOUT / SYSLST
SPG0003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0003 Error at request of class '(&00)' memory
SPG0004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0004 Error at release memory. A serslog entry has been written
Response
Contact Your system administrator or customer support.
SPG0005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0005 Error at GUARDS call
Response
Please check previous message for more specific information
SPG0006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0006 DMS error '(&00)' at processing of file '(&01)'
Meaning
A DMS call returned errorcode '(&00)'.
The errorcode 'FFFF' eventually means a necessary subsystem (JV,..)
is not activated.
Response
For more information, enter
/HELP-MSG-INFORMATION MSG-ID=DMS(&00).
SPG0007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0007 DMS error '(&00)' at catalog scan
Meaning
A catalog scan returned the DMS errorcode '(&00)'
Response
For more information, enter
/HELP-MSG-INFORMATION MSG-ID=DMS(&00).
SPG0008
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0008 An SMPGEN import is running. Please try your SMPGEN job again later
Meaning
During any SMPGEN exclusive pubset import processing,
no other SMPGEN job which requires a non imported
pubset state will be accepted.
Response
Try to start the SMPGEN job later
SPG0009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0009 Linkage error '(&00)' at SHC call
Meaning
A linkage error '(&00)' occured at a call of the SHC information
function NDEINF.
Response
Start SHC or wait for the completion of the SHC start function.
Afterwards call SMPGEN again.
SPG010A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG010A Only the system administrator may request this SMPGEN function
SPG010B
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG010B Task '(&00)' started to execute the SMPGEN function '(&01)'
Meaning
(&00) = TSN
(&01) = Description of the SMPGEN function to be executed
1 = Consistency check for a new system managed pubset,
2 = Creation of a new system managed pubset,
4 = Consistency check with existing system managed pubset,
5 = Extension of an existing system managed pubset.
SPG010C
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG010C The execution of the SMPGEN function '(&00)' has been started
Meaning
(&00) = Description of the SMPGEN function to be executed
1 = Consistency check for a new system managed pubset,
2 = Creation of a new system managed pubset,
4 = Consistency check with existing system managed pubset
5 = Extension of an existing system managed pubset.
SPG0100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0100 The parameter list is not accessible or not word aligned.
Meaning
The parameter list with which the privileged subsystem SMPGEN-S
was called, is not allocated or not accessible or not aligned.
Either SMPGEN-S was not called by the SMPGEN user interface
program, or there is an internal error in SMPGEN-U
Response
Please start SMPGEN jobs only by calling START-SMPGEN
SPG0101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0101 Invalid function or version of the SMPGEN job
Meaning
The SMPGEN interface program SMPGEN-U calls the subsystem
SMPGEN-S with a parameter list, which contains a function or
version number unknown to SMPGEN-S.
Response
Request Your system administrator or customer support to install
compatible versions of the subsystems SMPGEN-U and SMPGEN-S.
SPG0102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0102 SYSOUT output in batch task may not be requested
Meaning
The SMPGEN job is a batch task, but TEXT-OUTPUT is not *SYSLST.
Response
Try the SMPGEN job again in a dialog task or change the value
of the operand TEXT-OUTPUT.
SPG0103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0103 Syntax check was successful
Meaning
The syntax check requested by OPERATIONAL-MODE=*SIMULATION resulted
in considering the SMPGEN statement to be correct.
SPG0104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0104 The enter task can not be created. Reason '&00'
Meaning
(&00): Detailled specification of the error:
1 = a system function failed,
2 = the userid does not exist,
3 = the userid is locked,
4 = account number not supported,
5 = job class not defined,
6 = illegal job class,
7 = illegal run priority,
8 = illegal task category,
9 = illegal CPU limit,
10 = user contingent of CPU time exceeded,
11 = System error,
12 = job class limit exceeded,
13 = shortage of memory,
14 = maximal number of tasks (TSNs) exceeded,
15 = maximal number of tasks of this category exceeded.
Response
Contact Your system administrator or customer support.
SPG0105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0105 The enter task can not be activated. Reason '&00'
Meaning
(&00): Detailled specification of the error:
1 = connection to subsystem SMPGEN-S is impossible,
2 = system error or system memory shortage.
Response
1 : Check the subsystem state of SMPGEN-S.
2 : Contact the system administrator or customer support.
SPG0106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0106 Output file is invalid or not accessible
Meaning
The output file specified with TEXT-OUTPUT does not comply
with all of the following requirements:
- it must reside on a local accessible pubset,
- the user must have write access right for the file,
- it must not be protected by a write password,
- it must not be a temporary file
Response
Specify another TEXT-OUTPUT operand or change the file access conditions
SPG0107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0107 Output file could not be allocated
Meaning
TEXT-OUTPUT specified a not yet existing output file, and
the FILE macro was rejected with a DMS returncode. The reason
of the error can be concluded from the preceeding message.
Response
See preceeding message.
SPG0108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0108 Invalid MONJV specification
Meaning
The userid of the MONJV does not exist or the MONJV resides
on a pubset which is to be imported exclusively by SMPGEN.
Response
Specify a valid MONJV.
SPG0109
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0109 The SMPGEN function can not be started
Meaning
Before the execution of a SMPGEN function, an error
ocurred, or SMPGEN detected, that the user has specified
an illegal operand value. The SMPGEN function is not
performed. The reason of the error can be concluded from
the preceeding message.
Response
See the preceeding message.
SPG020A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020A Error during the processing of the allocator subroutine
Response
Contact Your system administrator or customer support.
SPG020B
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020B System managed pubset '(&00)' successfully constructed or extended
Meaning
(&00) = pubset id.
SPG020C
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020C System managed pubset '(&00)' could not be constructed or not be extended
Meaning
(&00) = pubset id.
SPG020D
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020D Some single feature pubset/s may have been destroyed
Response
Imcat pubsets by the following comand:
IMPORT-PUBSET PUBSET=<pvsid>,USE=*EXCLUSIVE(CONVERT-VOLUME-SET=*YES)
If this is not possible, restore the pubset data from a backup.
SPG020E
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020E Single feature pubset(s) unchanged or reconstructed
SPG020F
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG020F Guards catalogs destroyed
Response
The GUARDS catalog on at least one of the pubsets
is no more existing with its usual name.
You may find it with the name <usual name><pubsetid>,
or else You have to install a saved file version of this
catalog(s) to be able to access protected files.
The SECOS manual explains how to exchange the catalog.
SPG0201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0201 Subsystem GUARDS is not active
Meaning
The Subsystem GUARDS must be available because there
is a GUARDS catalog on at least one of the pubsets
to be checked/transformed by SMPGEN.
SPG0202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0202 $TSOS.SYSACL.FILE exists on the pubset '(&00)'.
Meaning
From the OSD V5.0 the subsystem SRPMFACL doesn't exist.
Response
Convert files with ACL protection.
Delete file $TSOS.SYSACL.FILE.
SPG0203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0203 Snapsets found for the pubset '(&00)'.
Meaning
Snapsets were found for at least one SF Pubset. The desired SM
pubset can not be created or not be extended for that reason.
Response
Snapsets have to be erased.
SPG0204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0204 Error at call of the usermanagement routine
Response
See preceeding message for more detailled information
SPG0205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0205 Name consistency check completed without errors
SPG0206
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0206 Name consistency check completed with errors
SPG0207
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0207 '(&00)' conversion started
Meaning
(&00) = GUARDS / SRPM / CMS.
SPG0208
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0208 Error '(&00)' at catalog management migration
Meaning
(&00) specifies the error cause :
1 = The file TSOSCAT on the pubset which should be
control volumeset is too small.
2 = more then 8190 different userids
3 = too many catalog entries
4 = error at release memory
5 = shortage of memory
6 = error at usertable access ( SRMUTC )
7 = error at file allocation
8 = error at erase of file
9 = inconsistent TSOSCAT
10 = error at adding or removing
a user partition from the catalog
11 = input/output error at catalog access
12 = SMPGEN internal error
13 = error at initialization or termination of CMS
14 = CMS internal error
15 = error at allocator call ( DALUCR )
16 = error at catalog entry update
17 = call error.
18 = catalog index file invalid
Response
Depending on the error cause:
1 : Remove some userids or delete some files residing on
the (future) control volume set. A Catalog expansion can
be achieved setting the pubset attributes LARGE_VOLUMES/
LARGE_FILES with the command SET-PUBSET-ATTRIBUTES.
5 : Try to have more memory available.
7 : Check, whether there is enough free space in the pubset
which should become control volume set.
8 : Check, whether some new CMS files ($TSOSCAT.) have
been allocated inspite of unsuccessful migration.
If so, please erase these files.
18 : Repeat the import and the export of the SM pubset. This
might eventually repair the damage.
In all other cases:
Contact Your system administrator or customer support.
SPG0209
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0209 Error '(&00)' at reconstructing the catalogs. File catalogs destroyed
Meaning
(&00) specifies the detailled error cause.
The same error causes with the same numbers apply to message SPG0208.
Response
In order to get more information, please enter
/HELP-MSG-INFORMATION MSG-ID=SPG0208.
SPG021A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG021A There is not enough free space on the control volume set
SPG021B
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG021B Pubset '(&00)' destroyed. Other single feature pubsets unchanged or reconstructed
Response
Try to imcat pubset by the following comand:
IMPORT-PUBSET PUBSET='(&00)',USE=*EXCLUSIVE(CONVERT-VOLUME-SET=*YES)
If this is not possible, restore the pubset data from a backup.
SPG021C
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG021C Pubset '(&00)' destroyed. Other single feature pubsets unchanged or reconstructed with the exception of some GUARDS catalogs
Response
Reconstruct pubset '(&00)' from a save file.
Please see message SPG020F also.
SPG021D
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG021D User does not have access right to pubset '(&00)'. Pubset '(&01)' will not be checked
Meaning
As the userid does not exist on pubset '(&00)'
or is locked there, this pubset will not be included
in the consistency check.
SPG021E
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG021E Net-Storage volume found for the SF pubset '(&00)'.
Meaning
For at least one SF pubset a Net-Storage volume is defined. The
desired SM pubset cannot be created or not be extended for that
reason.
Response
All Net-Storage volumes on the SF Pubsets to be comprised must be
removed (command REMOVE-NET-STORAGE-VOLUME) at first.
SPG0210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0210 Converted structures could not be removed
Meaning
One or several of the SM pubset management file(s)
the names of which can be found in the SMPGEN manual
are allocated on the SF pubsets.
Response
Erase these files before starting another SMPGEN job.
SPG0211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0211 CONVCAT files destroyed
Meaning
The pubsets can no more be imported in BS2000 version 10.
SPG0212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0212 The space used for file catalogs of the SF pubsets to be included is '(&00)' pages
SPG0213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0213 The space used for user catalogs of the SF pubsets to be included is '(&00)' pages
SPG0214
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0214 The space used for GUARD catalogs of SF pubsets to be included is '(&00)' pages
SPG0216
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0216 Usable space on the future or present control volumeset: '(&00)' pages, of which '(&01)' pages are free
SPG0217
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0217 The MONJV value could not be set. The SMPGEN job continues
SPG0218
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0218 Single feature pubset(s) reconstructed with the exception of the GUARDS catalog
SPG0219
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0219 Name consistency check terminated with warnings
Meaning
There are no inconsistencies which would prevent SMPGEN from
constructing or extenting a system managed pubset from the
checked pubsets.
Still, there are GUARDS condition records which cannot be automatically
updated. These GUARDS condition errors have been listed,
if detailled information was required.
Response
Please analyze and update Yourself the guards concerned
before or after the construction or extension of the SM-Pubset.
SPG030A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG030A Consistency check aborted
Meaning
The preceding message specifies the cause.
SPG0300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0300 Maximal error number exceeded
Meaning
The number of inconsistencies exceeds the value
of operand MAX-ERRORS. Only the inconsistencies
found before reaching this limit are displayed.
SPG0301
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0301 File '(&00)' exists already
Meaning
(&00): One of the work files created by SMPGEN
during the consistency check
Response
Erase this file before starting a new SMPGEN job.
SPG0302
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0302 Error at variable production. Reason '(&00)'
Meaning
(&00): Detailled error specification:
1 = subsystem VAS is not active,
2 = internal error in VAS,
3 = (version of) VAS function not supported.
Response
Contact Your system administrator or customer support.
SPG0303
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0303 SDF-P variable can not be modified. Reason '(&00)'
Meaning
(&00): Detailled error specification:
1 = Subsystem SDFPBASY, SDF-P or MIP is not active
or does not support the called function
2 = error in a system function,
3 = (version of) function not supported,
4 = SDF-P variable was not correctly declared.
Response
For reason 4: declare the variable with:
DECL-VAR name(DEF=*DYN),MULT-ELEM=LIST
In any other case:
Contact Your system administrator or customer support.
SPG0304
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0304 Number of conflicts of file names: '(&00)', of jv names: '(&01)', of GUARD names: '(&02)'
SPG0305
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0305 Number of file names which are too long: '(&00)', of jv names which are too long: '(&01)'
SPG0306
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0306 Number of GUARD warnings (= GUARD condition errors): '(&00)'
SPG0307
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0307 Pubset '(&00)': GUARD catalog protected by ACL or ACL catalog protected by GUARDS
Meaning
(&00): Identifier of the pubset
Response
Remove this protection before the SM pubset migration
SPG0308
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0308 Pubset '(&00)' contains files migrated to S1
Response
Migrate these files to S2 before SM pubset conversion
SPG0309
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0309 Function aborted by user
Meaning
The user has requested the abortion of the SMPGEN job
in a dialog panel or by entering /CANCEL-JOB.
SPG040A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040A Error at accessing the standard volume label
Response
Contact Your system operator.
SPG040B
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040B Pubset configuration file on pubset '(&00)' has been erased
Meaning
(&00): pubset id
On the pubset with the displayed identification there
was still a pubset configuration file which indicates
either an abnormally terminated reconfiguration or an
abnormally terminated SMPGEN run.
Response
After SMPGEN termination check the volume configuration
in case of reconfiguration failure; in case of still
existing, but no more usable cache area delete it.
If the configuration file was generated by SMPGEN,
no action is necessary.
SPG040C
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040C Number of volume sets of the existing SM pubset added to the number of SF pubsets to be included is greater than 255 or there is a volset in 'defective' or 'in hold' state
Response
Correct the specification of the SF pubsets to be included or modify
the state of the volsets within the already existing sm pubset
SPG040D
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040D Error at aquiring of disc '(&00)'
Response
Contact Your system operator.
SPG040E
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040E GUARDS recovery for SM pubset '(&00)' failed with returncode '(&01)'
Meaning
An attempt to extend the SM pubset was aborted previously. During the
subsequent import a GUARDS recovery was tried since GUARDS files
were found on the pubset.
Response
If we have a linkage error (returncode FFFF) the import should be
repeated on a system which is master for the pubset and on which
a GUARDS subsystem can be started. The error must be corrected or
the GUARDS recovery must be done with one's own hand. The GUARDS
recovery will be tried again during the next import.
SPG040F
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG040F System managed pubset '(&00)' is not recovered
Meaning
This is the pubset state after extension of a system managed pubset
or eventually after an erroneous termination of SMPGEN
or after a system crash.
Response
Import the pubset normally for recovery.
SPG0400
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0400 Pubset '(&00)': Missing MRSCAT entry or wrong pubset state
Meaning
If PUBSET-STATE=*NOT-IMPORTED was specified or the system
administrator is the caller and PUBSET-STATE was not specified,
one of the following necessary conditions is not fulfilled:
An MRSCAT entry containing the device type must exist,
the pubset must not be local or remote imported,
it must not be in import or export processing, and
its pubset type (SF/SM) must be declared correctly in the MRSCAT.
If PUBSET-STATE=*IMPORTED was specified or the caller
is not the system administrator
one of the following necessary conditions is not fulfilled:
The pubset must be local accessible, and its pubset
type (SF/SM) must be declared correctly.
If USER-ID=*ALL is specified, either the pubset must be
exclusively imported or the own host must be its master.
SPG0401
Destination: CONSOLE Routing code: * (main console) Weight: 90
Warranty : NO
SPG0401 SMPGEN import for pubset '(&00)' is delayed
Response
Look out for preceding messages, analyse them and
enter the response, if any response was requested.
SPG0402
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0402 SMPGEN import for pubset '(&00)' was not possible
Response
Contact Your system operator.
SPG0403
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0403 Waiting for the import of pubset '(&00)' was aborted
Meaning
This message is displayed, if the import of the pubset
is not finished in a reasonable time, although message
SPG0400 has been displayed on console several times.
Response
Contact Your system operator.
SPG0404
Destination: CONSOLE Routing code: * (main console) Weight: 90
Warranty : NO
SPG0404 SMPGEN export for pubset '(&00)' is delayed
Response
Look out for preceding messages, analyse them and
enter the response, if any response was requested.
SPG0405
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0405 SMPGEN export for pubset '(&00)' was not possible
Meaning
This message is displayed, if the export of the pubset
is not finished in a reasonable time, although message
SPG0403 has been displayed on console several times.
Response
Contact Your system operator.
SPG0406
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0406 SMPGEN export for pubset '(&00)' was not possible
Response
Contact Your system operator.
SPG0407
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0407 In/Output error at accessing the MRSCAT entry
SPG0408
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0408 The master catalog entry for the new SM pubset cannot be created or the entry for the SM pubset contains unexpected settings (e.g. control volume set id, type of entry). Reason '(&00)'
Meaning
(&00): Detailed error specification:
1 = an entry with the same id exists already
2 = the maximal number of MRSCAT entries exist already
3 = the MRSCAT entry was modified by command or by importing
the pubset, while the SMPGEN checks were done.
4 = the MRSCAT entry was modified by command or by importing
the pubset, concurrent to the SMPGEN run.
SPG0409
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0409 Devicetype code of the control volumeset changed
Meaning
The system administrator has changed the device
type code in the MRSCAT entry of the pubset which
should become control volumeset during the SMPGEN job.
SPG0500
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0500 Error '(&00)' at binding from '(&01)'
Meaning
(&00): Detailled error specification:
1 = memory request failed,
2 = internal error.
(&01): filename of the SMPGEN library.
Response
Contact Your system administrator or customer support.
SPG0501
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0501 FHS error '(&00)' at panel '(&01)'
Meaning
(&00): FHS returncode
(&01): SMPGEN internal panel name.
Response
Contact Your system administrator or customer support.
SPG0502
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SPG0502 Error '(&00)' at displaying panel '(&01)'
Meaning
(&00): TIAM returncode
(&01): SMPGEN internal panel name.
Response
Check the WRTRD returncodes listed in the macro call manual.