Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0001 ONLY USER-ID OWNED BY USER CAN BE SPECIFIED. CMD REJECTED
Meaning
A user has requested the display of JOIN entry, which is
not his own entry.
Response
The normal user can either specify his user id or specify
the value *OWN for the operand: USER-ID=.
SJM0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0002 USER NOT PRIVILIGED FOR OPERAND '(&00)'. CORRECT CMD
Meaning
A user has specified an operand such as ATTRIBUTES, INFORMATION,
which are reserved for system administrator.
(&00): 1st reserved operand specified.
Response
User must enter a correct command with only the
operands USER-IDENTIFICATION, PUBLIC-VOLUME-SET, or OUTPUT.
SJM0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0003 RELM ERROR IN MODULE 'SJMACTR'. TASK ABORTED WITH DUMP
Meaning
Internal error in processing of /ACCOUNT RECORD command.
Virtual memory cannot be released.
Response
Submit DUMP to system diagnosis.
SJM0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0004 USER-ID '(&00)' NOT IN JOIN FILE OF PVS-ID '(&01)'
Meaning
(&01): PUBLIC VOLUME SET-ID.
Response
Issue the same command with another CATID, or contact the
system administrator if the requestor is a normal user.
SJM0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0005 OPERAND ERROR '(&00)'. CORRECT CMD
Meaning
Operand value not within allowable range.
SJM0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0006 PVS-ID '(&00)' NOT ACCESSIBLE
Response
Issue the same command with another CATID, or contact
the system administrator if the requestor is a normal user.
SJM0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0007 INVALID OPERAND. CORRECT /SHOW-USER-ATTRIBUTES COMMAND
SJM0100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0100 MEMORY REQUEST UNSUCCESSFUL. CMD NOT PROCESSED
Response
Contact system administrator.
SJM0101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0101 OPERAND 'MAXLST' OR 'MAXOPT' IS NOW JOB CLASS ATTRIBUTE. PROCESSING CONTINUES
Meaning
The corresponding value is moved into JOIN entry.
This message warns the user (TSOS) that this value is no more user's but
job's class attribute.
SJM0103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0103 ERROR DURING THE CREATION OF THE USER TABLE ENTRY ATTACHED TO THE USER '(&00)' FOR PVS-ID '(&01)'. COMMAND REJECTED
SJM0104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0104 SYSTEM ERROR DURING READ ON JOINFILE. CONTACT SYSTEM ADMINISTRATOR
SJM0105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0105 SYSTEM ERROR DURING WRITE ON JOINFILE. CONTACT SYSTEM ADMINISTRATOR
SJM0106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0106 SYSTEM ERROR DURING RELEASE MEMORY. CONTACT SYSTEM ADMINISTRATOR
SJM0107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0107 ACCOUNT NUMBER NOT SPECIFIED. CORRECT /JOIN CMD RESP. /ADD-USER CMD
Meaning
An account number must be specified:
-When creating a new user id
-When one of the account attributes will be specified.
SJM0108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0108 UNABLE TO UPDATE THE JOIN COPY '(&00)'
Meaning
The update of the JOIN copy cannot be done due to error '(&00)'.
A new copy will be taken automatically at next startup.
SJM0109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0109 A CATALOG BLOCK COULD NOT BE OBTAINED. USER'S ENTRY NOT PLACED IN JOIN TABLE
Meaning
A PAM logical block could not be obtained from the system.
SJM0110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0110 JOIN TABLE ENTRY FULL. ACCOUNT NUMBER '(&00)' CANNOT BE INCLUDED
Meaning
The user identification already has the maximum allowable
number of account numbers in the JOIN table entry.
SJM0111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0111 ACCOUNT NUMBER '(&00)' WAS NOT FOUND. IT CANNOT BE DELETED
Meaning
The account number specified cannot be found in the
join table entry for this user identification.
SJM0112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0112 THE LAST ACCOUNT NUMBER CAN NOT BE REMOVED
Meaning
The system administrator has specified that all account numbers
associated with an user identification are to be deleted, and has not
specified any new ones. This is not allowed.
SJM0113
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0113 REQUEST ACCEPTED AND THE JOIN ENTRY IS MODIFIED BY SYS ADM
Meaning
The /MODIFY-USER resp. /JOIN or /MODIFY-USER-PROTECTION resp.
/PSWORD requests are accepted but some values
of the JOIN entry work area have been modified by the
system administrator.
Response
Contact the system administrator.
SJM0114
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0114 REQUESTED JOIN TABLE ENTRY SIZE EXCEEDS THE SYSTEM STANDARD. COMMAND TERMINATED
Meaning
Information entered in command would cause size of JOIN table entry
to exceed standard size.
Possible commands:
SDF-commands ISP-command
/ADD-USER /JOIN
/MODIFY-USER.
SJM0115
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0115 THIS COMMAND IS RESTRICTED TO THE SYSTEM ADMINISTRATOR
Meaning
A user other than TSOS has entered a system administrator command.
SJM0116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0116 WRONG OPERAND VALUE. CMD REJECTED
Meaning
The size of the user's memory address space can be
between 1 up to 2040 Megabytes.
Concerned operand: ADDRESS-SPACE-LIMIT resp. ADDRSPACE.
Response
The system administrator is invited to give a correct
value for the operand.
SJM0117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0117 OPERAND SYNTACTICAL ERROR. REENTER COMMAND
Meaning
System administrator entered /JOIN command resp. /ADD-USER, /MODIFY-USER
with invalid syntax.
Response
Repeat command with valid operands.
SJM0118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0118 REQUEST REJECTED BY SYSTEM ADMINISTRATOR-EXIT ROUTINE
Meaning
The request has been rejected by the corresponding EXIT routine.
Possible requests were:
/ADD-USER, /MODIFY-USER, /JOIN and /MODIFY-USER-PROTECTION, /PSWORD.
Response
Contact the System Administrator.
SJM0119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0119 THE IDENTIFIER '(&00)' IS RESERVED FOR SYSTEM USAGE AND CANNOT BE USED AS USER ID
Meaning
The System Administrator tried to use a reserved identifier as user id.
Such an identifier is reserved for BS2000 internal usage and cannot
be used as user id.
Response
Take another user id.
SJM0120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0120 ANOTHER CREATION OF UID: '(&00)' IS IN PROGRESS. CMD REJECTED
Meaning
It is not possible to manage 2 creations of the same user id at the
same time.
Response
Reissue the command.
SJM0200
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0200 MRSCAT ENTRY FOR PVS-ID '(&00)' LOCKED. RETRY COMMAND
SJM0201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0201 ERROR DURING THE DESTROY OF THE USER TABLE ENTRY ATTACHED TO THE USER '(&00)' FOR PVS-ID '(&01)'. PROCESSING CONTINUES
SJM0202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0202 USER ID '(&00)' HAS NO JOIN TABLE ENTRY. CANNOT BE REMOVED
Meaning
User identification '(&00)' can not be deleted as there is no JOIN table
entry for it.
SJM0203
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SJM0203 DO YOU REALLY WANT TO LOCK USER ID '(&00)'? REPLY (Y=YES; N=NO)
Meaning
Question after a /LOCK-USER resp. /SEVER command whether the command
should really be performed.
This message is not sent in batch tasks.
(&00): user identification.
(&01): PVS identification.
Response
Y: the command shall be performed.
N: the /LOCK-USER resp. /SEVER command is ignored.
SJM0204
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SJM0204 DO YOU REALLY WANT TO REMOVE USER ID '(&00)' ON PVS-ID '(&01)'? REPLY (Y=YES; N=NO)
Meaning
(&00): user identification
(&01): PVS identification.
Response
Y: The command shall be performed.
N: The command is ignored.
SJM0205
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
SJM0205 DELETE ERROR. '(&00)' STILL HAS JOB VARIABLE-CATALOG ENTRIES. PROCESSING CONTINUES
Meaning
The system administrator attempted to issue a /REMOVE-USER resp.
/SEVER '(&00)', remove command. During erase of job variables a serious
error occurred.
Message returned from DMERAJV module.
Response
If neccessary, erase the job variables and reissue the /REMOVE-USER resp.
/SEVER command.
SJM0206
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0206 DUE TO ERASE ERROR, USER ID '(&00)' STILL HAS PUBLIC SPACE
Meaning
The system administrator attempted to enter a /REMOVE-USER resp.
/SEVER '(&00)' REMOVE command despite a data save still due to be
performed for the affected user.
(&00): User identification.
Response
If necessary, delete files and repeat command.
SJM0207
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0207 USER ID '(&00)' IS NOT REMOVED BUT LOCKED
Meaning
Due to invalid /REMOVE-USER resp. /SEVER processing, user entry '(&00)' is
not removed, but user is prohibited from accessing the system.
SJM0208
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0208 CATALOG ENTRY '(&00)' CANNOT BE RELEASED
Meaning
Catalog entry of user identification '(&00)' can not be deleted.
SJM0209
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0209 USER ID '(&00)' ALREADY LOCKED. CMD IGNORED
Meaning
The /LOCK-USER resp. /SEVER command (SET operand) was given to lock the
user id '(&00)'.
The user id was previously locked. The command is ignored.
SJM0210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0210 USER ID '(&00)' WAS NOT LOCKED. CMD IGNORED
Meaning
A /UNLOCK-USER resp. /SEVER command (RESET operand) was given for the user
id '(&00)' which was not locked before by a /LOCK-USER resp. /SEVER
command (SET operand).
SJM0211
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0211 OPERAND SYNTACTICAL ERROR IN /SEVER COMMAND. REENTER THE COMMAND
Meaning
A syntax error in the /SEVER command.
Response
Reenter the command using the correct syntax.
SJM0212
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0212 THE SYSTEM ADMINISTRATOR REMOVED OR LOCKED
Meaning
The system administrator can not be deleted from JOIN table. The system
administrator attempted to enter a command for himself.
Possible command:
SDF-commands ISP-command
/LOCK-USER /SEVER
/REMOVE-USER.
SJM0213
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0213 THE "SERVICE" USER-ID CANNOT BE REMOVED OR LOCKED
Meaning
The "SERVICE" USER-ID cannot be deleted from JOIN table.
The "SERVICE" USER-ID attempted to enter a command for himself.
Possible command:
SDF-commands ISP-command
/LOCK-USER /SEVER
/REMOVE-USER.
SJM0214
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0214 ABNORMAL CONDITION DURING /SEVER RSP. /REMOVE-USER PROCESSING. COMMAND REJECTED
SJM0215
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0215 THIS COMMAND IS RESTRICTED TO THE SYSTEM ADMINISTRATOR
Meaning
A user other than TSOS has entered a system administrator command.
SJM0300
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0300 REQM ERROR. TASK ABORTED WITH DUMP
SJM0301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0301 RELM ERROR. TASK ABORTED WITH DUMP
SJM0302
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SJM0302 UNABLE TO UPDATE THE JOIN COPY (&00)
Meaning
The update of the JOIN copy cannot be done due to error (&00).
A new copy will be taken automatically at next startup.
SJM0303
Destination: CONSOLE Routing code: E Weight: 50
Warranty : NO
SJM0303 THE USER '(&00)' CANNOT MODIFY, SUPPRESS OR DEFINE THE PASSWORD IN JOIN. CMD REJECTED
Meaning
The user '(&00)' cannot modify, suppress or define the JOIN's password.
(&00): user id.
Response
Contact the system administrator.
SJM0304
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0304 NO JOIN TABLE ENTRY EXISTS FOR THIS USER ID. UPDATE IGNORED
Meaning
A command for the update of the JOIN entry has been given
for which no user identification can be found.
Response
If necessary, create a new user id entry and repeat the command for this
user id.
SJM0305
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0305 OPERAND SYNTACTICAL ERROR. REENTER COMMAND
Meaning
Syntax error in /PSWORD resp. /MODIFY-USER-PROTECTION command.
Response
Reissue the /PSWORD command using correct syntax.
SJM0306
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0306 REQUEST ACCEPTED AND THE JOIN ENTRY IS MODIFIED BY SYS ADM
Meaning
The /MODIFY-USER resp. /JOIN or /MODIFY-USER-PROTECTION
resp. /PSWORD requests are accepted but some values of the JOIN entry
work area have been modified by the system administrator.
Response
Contact the system administrator.
SJM0307
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0307 REQUEST REJECTED BY SYSTEM ADMINISTRATOR-EXIT-ROUTINE
Meaning
The request has been rejected by the corresponding EXIT routine.
Possible requests were:
/ADD-USER, /MODIFY-USER, /JOIN and /MODIFY-USER-PROTECTION, /PSWORD.
Response
Contact the system administrator.
SJM0308
Destination: CONSOLE Routing code: E Weight: 50
Warranty : NO
SJM0308 THE USER '(&00)' CAN ONLY MODIFY THE PASSWORD IN JOIN. CMD REJECTED
Meaning
The user '(&00)' cannot suppress or define the JOIN's password.
(&00): user id.
Response
Contact the system administrator.
SJM0309
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0309 PASSWORD INVALID
Response
Reissue /PSWORD resp. /MODIFY-USER-PROTECTION command with proper
password.
SJM0310
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0310 PAM I/O ERROR DURING JOIN MGR PROCESSING
Meaning
DMS error code 'DMS0D27'. Operating system error.
For more detailed information about the DMS error enter the /HELP command
in system mode, or see the manuals 'System Message', 'DMS Disk Processing'
or 'DMS Tape Processing'.
DQPAM detected an I/O error while performing requested function.
Response
Inform the responsible system administrator so that
diagnose material can be produced if necessary and possible.
SJM0350
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0350 ABNORMAL PROGRAM TERMINATION DUE TO A WRONG ADDRESS OF OPERAND LIST
SJM0351
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0351 24-BIT SVC USED IN 31-BIT ADDRESSING MODE
Meaning
The JOIN access macro with PARMOD=24 isn't authorized in XS mode.
The program terminates with dump.
Response
Use the macro with PARMOD=31 or load the program in not-XS mode.
SJM0400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0400 THE CALLER TRIES TO LOCK A JOIN RECORD ALREADY LOCKED BY HIMSELF IN THE SAME SESSION
SJM0401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0401 THE CALLER TRIES TO UNLOCK A JOIN RECORD WHICH HAS BEEN LOCKED BY ANOTHER TASK
SJM0402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0402 THE CALLER TRIES TO UNLOCK THE JOIN FILE, BUT THIS ONE IS NOT LOCKED BY HIS TASK
SJM0403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0403 RELEASE MEMORY ERROR IN JOINMAN
SJM0404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0404 THE JOIN RECORD TO BE PUT INTO THE JOIN FILE IS INVALID
SJM0405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0405 THE USER-ID POINTED BY THE CALLER R0 IS NOT THE SAME AS THE ONE IN THE JOIN RECORD, POINTED BY THE CALLER R1
SJM0406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0406 THE RECORD TO BE PUT IN THE JOIN FILE IS LOCKED, BUT THE LOCK WAS SET DURING ANOTHER SESSION
SJM0407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0407 REQM IN 'JOINMAN' DURING THE PROCESSING OF ABNORMAL TASK TERMINATION
SJM0408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0408 REQM/RELM ERROR IN THE LOCK ROUTINE OF JOINMAN
SJM0409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0409 THE TASK TRIES TO LOCK THE JOIN FILE WHICH IS ALREADY LOCKED BY THIS TASK
SJM0410
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SJM0410 JOINFILE OF SYSTEM '(&00)' COULD NOT BE CLOSED
Meaning
Upon shutdown, the home JOIN file and all imported JOIN files must
be closed.
The indicated JOIN file could not be closed by the JOIN manager.
Response
The next startup or importation will try to repair that JOIN file
(react then).
SJM0500
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SJM0500 DUE TO DMS ERROR CODE '(&00)', JOINFILE ON PVS-ID '(&01)' DISTURBED. COPY IS USED. DMS ERROR: /HELP (&00),INF=D
Meaning
Due to DMS error code '(&00)', JOIN file of PVS-ID (&01) cannot be used.
In further processing, the copy of the JOIN file is used.
For more detailed information about the DMS error enter
/HELP command in system mode or see DMS manual.
(&01): CAT-ID of public volume set.
Response
Contact system administrator.
SJM0501
Destination: CONSOLE Routing code: S Weight: 98
Warranty : NO
SJM0501 WARNING: DUE TO DMS ERROR CODE '(&00)', NO NEW COPY OF JOIN FILE ON PVS-ID '(&01)'. CONTINUE? REPLY (Y=YES; N=NO)
Meaning
A new copy of the JOIN file cannot be taken.
The processing can continue but the integrity of the JOIN file is
decreased, because the system cannot be loaded at the next startup if the
JOIN file is unrecoverable.
For more detailed information about DMS error
enter '/HELP (&00),INF=D' command later in system mode or see DMS manual.
(&01): CAT-ID of public volume set.
Response
Y: accept a lower integrity of the system.
N: processing on JOIN file will be terminated.
SJM0502
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SJM0502 NO MEMORY AVAILABLE. PROCESSING OF JOIN FILE ON PVS-ID '(&00)' ABORTED
SJM0503
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SJM0503 DMS ERROR CODE '(&00)', ON JOIN FILE FOR PVS-ID '(&01)' NOT RECOVERABLE. PROCESSING ABORTED
Meaning
No copy of JOIN file exists.
(&01): CAT-ID of public volume set.
Response
Take dump and submit dump to system diagnosis.
SJM0504
Destination: CONSOLE Routing code: J Weight: 99
Warranty : NO
SJM0504 JOIN FILE WILL BE RESET AS REQUESTED
Meaning
A FIRST start with reset of JOIN file has been asked.
SJM0600
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0600 JOB MANAGEMENT STARTUP ERROR. STARTUP ABORTED
Meaning
An error is returned by the job management initialisation.
The operator is already informed.
SJM0601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0601 ERROR IN DMS USER TABLES PROCESSING DURING STARTUP
SJM0650
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SJM0650 TSN INITIALISATION ERROR. STARTUP ABORTED
Meaning
A REQM error has occured, or the
operator terminated the startup.