Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIRCOPY Copyright (C) (&01) (&00) All Rights Reserved
SIRLOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIRLOAD Program (&00), Version (&01) of (&02) loaded from file (&03)
SIRSTRT
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIRSTRT Procedure (&00), Version (&01) of (&02) started from file (&03)
SIR0000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0000 PROGRAM (&00) (VERSION (&01)) READY FOR INPUT
SIR0001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0001 SUBSYSTEM 'SIR' CANNOT BE LOADED VIA COMMAND /START-SUBSYSTEM
Meaning
The execution of subsystem SIR is permitted implicit with start of program
SIR, only
Response
Please use the command /START-SIR respectively /SIR to start the program
SIR
SIR0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0002 Subsystem SIR Inconsistent. SIR terminated
Meaning
The requested function is not supported by the subsystem SIR. Probably the
installation of the subsystem is wrong
Response
Please contact the system administator
SIR0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0003 ADDRESS OF INTERFACE PARAMETERLIST CHANGED. 'SIR' TERMINATED
Meaning
The parameterlist is not on the expected address
Possible reasons:
- SIR is not called via /START-SIR respectively /SIR
- the installation of subsystem sir is inconsistent
Response
- please start program SIR via command /START-SIR
- please contact the system administrator
SIR0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0004 VOLIN INTERFACE ERROR. 'SIR' TERMINATED ABNORMALLY
SIR0016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0016 VALUE OF OPERAND 'FORMAT' SET TO 'BY-INPUT'
Meaning
Only the operand value FORMAT=BY-INPUT is supported in
BS2000 versions earlier than V10.0.
SIR0017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0017 MORE THAN ONE DISK WITH VSN '(&00)' AND DEVICE TYPE '(&01)' AVAILABLE. STATEMENT IGNORED
SIR0018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0018 NO INFORMATION ABOUT DISKS WITH VSN '(&00)' AND DEVICE TYPE '(&01)' AVAILABLE. STATEMENT IGNORED
SIR0019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0019 MORE THAN ONE DISK WITH VSN '(&00)' AND DEVICE TYPE '(&01)' ON FOLLOWING DEVICES: '(&02)'. SPECIFY DEVICE TO BE USED. REPLY: (<MN>)
Meaning
(&02): device list.
SIR0020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0020 LAST SESSION WITH EXISTING PUBSET TERMINATED ABNORMALLY. FUNCTION '(&00)' NOT POSSIBLE
Meaning
- The SHUTDOWN bit in the SVL (standard volume label) of SYSRES is set.
The PUBSET cannot be used for function '(&00)' (see the 'ACTION'
parameter)
- a non-volatile cache still contains valid data
Possible reason:
The PUBSET was not exported correctly.
Response
Try to export the PUBSET correctly, then repeat the SIR run.
SIR0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0021 //CREATE-SNAP-FILE FOR DISKS OF DEVICE TYPE 'D3475' NOT PERMITTED. STATEMENT IGNORED
SIR0022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0022 VALUE OF 'SNAP-SIZE' NOT PERMITTED. STATEMENT IGNORED
SIR0023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0023 //CREATE-SNAP-FILE ONLY PERMITTED FOR NEWLY ADDED DISKS OF THE PUBSET. STATEMENT IGNORED
Response
To create a SNAP file on an existing pubset, it is nessesary to extend
this pubset with one or more disks for which you can give one
//CREATE-SNAP-FILE assignment
SIR0024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0024 //CREATE-SNAP-FILE ONLY ALLOWED FOR DISKS FOR WHICH A //CREATE-VOLUME HAS BEEN ISSUED. STATEMENT IGNORED
SIR0025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0025 WITHOUT //DECLARE-PUBSET THE STATEMENTS //CREATE-VOLUME, //CREATE-CATALOG, //CREATE-PAGING-FILE AND //CREATE-SNAP-FILE ARE NOT PERMITTED; STATEMENTS IGNORED
Meaning
The specified assignments are allowed with pubset installation or pubset
extention, only
SIR0026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0026 WITHOUT //DECLARE-PUBSET THE STATEMENT //COPY IS NOT PERMITTED WITH OPERAND VALUE 'TO=*PUBSET(DISK-NUMBER=<NN>)'. STATEMENT IGNORED
SIR0028
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0028 COMBINATION OF OPERAND VALUES 'FROM=*PUBSET' AND 'NEW=*SAME' NOT PERMITTED. STATEMENT IGNORED
Meaning
Copying of a file with the same name as the source is not possible.
Response
Please specify different filenames for input file and output file.
SIR0029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0029 CAT ID OF OUTPUT FILE DOES NOT AGREE WITH PUBSET ID ('DECLARE-PUBSET' OPERAND VALUE) OF OUTPUT DISK. STATEMENT IGNORED
Meaning
If the operand 'TO=*PUBSET(DISK-NUMBER=<NN>)' is specified, the output
file has to be created in the pubset which is declared in the statement
//DECLARE-PUBSET.
SIR0030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0030 COMBINATION OF FILE NAME AND PREFIX (ADD=<PFX>) TOO LONG. STATEMENT IGNORED
Meaning
The maximal allowed length of combination of filename (without CAT-ID and
USER-ID) and prefix is for full qualified filenames 41 Characters and for
partial qualified filenames 40 Characters.
SIR0031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0031 OPERAND VALUE OF PREFIX 'REMOVE=<PFX>' NOT PART OF FILENAME. STATEMENT IGNORED
SIR0032
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0032 DISK PACK WITH VSN '(&00)' NOT MEMBER OF SPECIFIED PUBSET. //COPY WITH OPERAND 'TO=*PUBSET(DISK-NUMBER=(&01))' IGNORED
SIR0033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0033 COMBINATION OF FULLY AND PARTIALLY QUALIFIED FILE NAMES NOT PERMITTED WITH OPERANDS 'FILE=<NAME>' AND 'NEW=<NAME>'. STATEMENT IGNORED
SIR0034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0034 'PREFIX' OPERAND VALUE DOES NOT COMPLY WITH FILE NAME CONVENTIONS. STATEMENT IGNORED
SIR0035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0035 CAT ID AND/OR USER ID IN '*PREFIX(ADD=<NAME>,REMOVE=<NAME>)' NOT PERMITTED. STATEMENT IGNORED
SIR0036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0036 INVALID REPLY TO PRECEDING MESSAGE. CORRECT INPUT
SIR0037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0037 ENTER CONTINUATION LINE
SIR0038
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0038 STATEMENT TOO LONG. STATEMENT IGNORED
Meaning
Maximum permissible length for a statement: 460 characters.
SIR0039
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0039 VERSION OF BS2000 AND (&00) NOT COMPATIBLE
Meaning
The program (&00) started is not released for the BS2000 version
of the current system.
SIR0040
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0040 DO YOU WANT TO CORRECT INPUT? REPLY (Y=YES; N=NO)
SIR0043
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0043 please correct the sequence of statements and try again or delete it using the statement //DELETE-STATEMENTS STATEMENT-NUMBER=*ALL
SIR0048
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0048 no valid sequence of statements given
SIR0049
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0049 NO VALID STATEMENT ENTERED
SIR0050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0050 WITHOUT //DECLARE-PUBSET THE //CREATE-/MODIFY-IPL-VOLUME STATEMENTS ARE ONLY PERMITTED WITH OPERAND '*PRIVATE'. STATEMENTS IGNORED
Meaning
If no there is no pubset declared for the current SIR run, you can use
the statements //CREATE-IPL-VOLUME and //MODIFY-IPL-VOLUME for private
disks, only.
SIR0051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0051 WITHOUT //DECLARE-PUBSET THE //CREATE-IPL-VOLUME STATEMENT IS ONLY PERMITTED WITH OPERAND 'DISK-NUMBER=*PRIVATE'
Meaning
All //CREATE-IPL-VOLUME statements referring to a pubset are ignored.
SIR0052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0052 WITHOUT //DECLARE-PUBSET THE //MODIFY-IPL-VOLUME STATEMENT IS ONLY PERMITTED WITH OPERAND 'DISK-NUMBER=*PRIVATE'
Meaning
All //MODIFY-IPL-VOLUME statements referring to a pubset are ignored.
SIR0054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0054 //CREATE-VOLUME STATEMENTS MISSING
SIR0055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0055 //CREATE-VOLUME FOR PUBRES / VOLRES MISSING
Meaning
A pubset or volset has as minimum one disk, the pubres or volres. This
special disk has always the number 0.
SIR0056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0056 //CREATE-CATALOG ONLY ALLOWED FOR DISKS FOR WHICH //CREATE-VOLUME STATEMENT HAS BEEN ISSUED. STATEMENT IGNORED
SIR0057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0057 //CREATE-PAGING-FILE ONLY ALLOWED FOR DISKS FOR WHICH //CREATE-VOLUME STATEMENT HAS BEEN ISSUED. STATEMENT IGNORED
SIR0058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0058 //CREATE-IPL-VOLUME / //MODIFY-IPL-VOLUME ONLY ALLOWED FOR DISKS FOR WHICH //CREATE-VOLUME STATEMENT HAS BEEN ISSUED
SIR0059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0059 //CREATE-CATALOG WITH OPERAND VALUE 'ACTION=*EXTEND' NOT PERMITTED. STATEMENT(S) IGNORED
SIR0060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0060 //CREATE-VOLUME NOT PERMITTED FOR DISKS OF EXISTING PUBSET / VOLSET
SIR0061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0061 //CREATE-PAGING-FILE ONLY PERMITTED FOR DISKS OF NEW PUBSET
SIR0062
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0062 //IPL-VOLUME NOT PERMITTED FOR DISKS OF EXISTING PUBSET
SIR0063
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0063 ERROR ON READING SVL OF SYSRES
Meaning
SVL: standard volume label.
SIR0064
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0064 NO //CREATE-PAGING-FILE STATEMENT ISSUED DESPITE OPERAND VALUE 'ACTION=*INSTALL'
SIR0066
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0066 LAST SESSION WITH EXISTING PUBSET TERMINATED ABNORMALLY. PUBSET EXTENSION NOT POSSIBLE
Meaning
The SHUTDOWN bit in the SVL (standard volume label) of SYSRES is set.
It is not possible to extend the PVS.
Possible reasons:
The PUBSET was not exported correctly.
Response
Try to export the PUBSET correctly, then repeat the SIR run.
SIR0071
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0071 NUMBER OF DISKS GIVEN BY OPERAND 'OVERWRITE-DISK' OR 'UNIT' DOES NOT MATCH WITH NUMBER OF DISKS GIVEN BY RANGE. STATEMENT IGNORED
SIR0072
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0072 VALUE OF 'CAT-SIZE' LOWER THAN 30. STATEMENT IGNORED
SIR0073
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0073 VALUE OF 'PAGING-FILE-SIZE' NOT PERMITTED. STATEMENT IGNORED
SIR0074
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0074 COMBINATION OF OPERAND VALUES 'FILE=*ALL' AND 'FROM=*PUBSET' NOT PERMITTED. STATEMENT IGNORED
SIR0075
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0075 PARTIALLY QUALIFIED FILE NAMES NOT PERMITTED WITH OPERAND 'NEW=<NAME>'. STATEMENT IGNORED
SIR0076
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0076 PARTIALLY QUALIFIED FILE SPECIFICATION 'FILE=<NAME>' ONLY PERMITTED WITH OPERAND 'NEW=*SAME'. STATEMENT IGNORED
SIR0077
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0077 WITH OPERAND 'FROM=(VOLUME=<VSN>..)' ONLY PRIVATE VOLUME PERMITTED. STATEMENT IGNORED
SIR0078
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0078 WITH OPERAND 'TO=<VSN>' ONLY PRIVATE VOLUME PERMITTED. STATEMENT IGNORED
SIR0079
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0079 WITH OPERAND 'DISK=*PRIVATE(..)' ONLY PRIVATE VOLUME PERMITTED. STATEMENT IGNORED
SIR0080
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0080 PARTIALLY QUALIFIED FILE SPECIFICATIONS NOT PERMITTED. STATEMENT IGNORED
SIR0081
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0081 INCORRECT DEVICE TYPE. STATEMENT IGNORED
SIR0082
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0082 INCORRECT DISK SPECIFICATION. STATEMENT IGNORED
Meaning
For operand DISK-NUMBER only the following values are allowed: 0-9, A-Z
SIR0083
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0083 INCORRECT RANGE SPECIFICATION. STATEMENT IGNORED
SIR0084
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0084 FILE NAME DOES NOT COMPLY WITH NAMING CONVENTIONS. STATEMENT IGNORED
SIR0085
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0085 INCORRECT USER ID. STATEMENT IGNORED
SIR0086
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0086 INCORRECT CAT ID. STATEMENT IGNORED
SIR0089
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0089 WITH OPERAND 'FROM=(VOLUME=<VSN>..)' ONLY TAPES PERMITTED IF OPERAND VALUE 'FILE=*ALL' IS GIVEN. STATEMENT IGNORED
SIR0090
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0090 '//(&00)' STATEMENTS FOR DECLARE-PUBSET/BEGIN-VOLUME-SET-DECLARATION WITH OPERAND VALUE 'ACTION=(&01)' MISSING
SIR0091
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0091 '//(&00)' STATEMENTS WITH OPERAND VALUE 'ACTION=(&01)' NOT PERMITTED. STATEMENTS IGNORED
SIR0092
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0092 '//(&00)' STATEMENTS ONLY PERMITTED FOR DISKS OF PUBSET
SIR0093
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0093 VALID '//(&00)' STATEMENTS WITH OPERAND VALUE 'ACTION=(&01)' OF //DECLARE-PUBSET STATEMENT MISSING
SIR0094
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0094 //CREATE-IPL-VOLUME / //MODIFY-IPL-VOLUME ONLY PERMITTED FOR DISKS OF PUBSET OR PRIVATE DISKS
SIR0095
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0095 //COPY WITH OPERAND VALUE 'TO=*PUBSET' MISSING
SIR0096
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0096 //CREATE-IPL-VOLUME / //MODIFY-IPL-VOLUME STATEMENTS FOR DISKS OF PUBSET MISSING
SIR0097
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0097 IN STATEMENT NO. (&00) VALUE OF PARAMETER 'DISK' INCONSISTENT WITH PUBSET ID IN //DECLARE-PUBSET. VALUE IGNORED
Meaning
- If the PUBSET ID has one character, the set of permissible values for
the 'DISK' parameter is 0 through 31.
- If the PUBSET ID has more than one character and the allocation-unit=6,
the set of permissible values is 0 through 9 and A through V.
- If the PUBSET ID has more than one character and the allocation-unit is
not 6, up to 3 digits of the set of permissible values 0 through 9 and
A through Z are allowed
SIR0098
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0098 VALUE 'NK' OF PARAMETER 'FORMAT' INCORRECT
Meaning
If SIR is running on a BS2000 a version earlier than V10, the value NK is
not allowed.
SIR0099
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0099 INCORRECT 'SYS ID'. STATEMENT IGNORED
SIR0100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0100 (&00) ERROR
Meaning
An error occured while executing function. For more details see
previous messages on sysout and in console logging.
SIR0101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0101 REQM ERROR: NO MORE SPACE AVAILABLE
SIR0102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0102 REQM ERROR: INCORRECT OPERANDS
SIR0103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0103 (&00) ERROR WITH DMS ERROR CODE '(&01)'.
Meaning
for detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages', if the error code
is not equal 0000.
SIR0104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0104 'NISUT' ROUTINE CALL WITH INCORRECT OPERANDS
SIR0105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0105 '(&00)' CALL WITH INCORRECT OPERANDS
SIR0106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0106 FSTAT ERROR WITH DMS ERROR CODE '(&00)' FOR IPL FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
SIR0107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0107 ERROR: SPECIFIED PUBSET IS A REMOTE PUBSET
SIR0108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0108 (&00) ERROR WITH DMS ERROR CODE '(&01)' CONCERNING IPL FILE '(&02)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
SIR0109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0109 (&00) ERROR WITH DMS ERROR CODE '(&01)' DURING ACCESS TO DISK '(&02)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
SIR0110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0110 TOO MANY DISKS SPECIFIED WITH THE '*RANGE' PARAMETER IN STATEMENT '//(&00)'
SIR0111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0111 TOO MANY DISKS SPECIFIED. STATEMENT IGNORED
Meaning
Maximum number: 255 disks.
SIR0112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0112 VALUE OF PARAMETER 'ALLOCATION-UNIT' INCORRECT. STATEMENT IGNORED
SIR0116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0116 'ACTION=*IPL' NOT ALLOWED FOR 4K FORMATTED PVS. ALL STATEMENTS IGNORED
SIR0117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0117 IPL STATEMENT NOT ALLOWED FOR 4K FORMATTED PVS. STATEMENT IGNORED
SIR0118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0118 SYSTEM-ENTRY (&00) NOT FOUND. PROCESSING CONTINUES
SIR0119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0119 ON BS2000 <= V11.0 AVAILABILITY=DUALCOPY IS NOT ALLOWED
SIR0120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0120 OPERAND AVAILABILITY EQUAL "DRV" OFFLINE NOT ALLOWED
SIR0121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0121 ON BS2000 <= V11.0 AVAILABILITY=RAID NOT ALLOWED
SIR0122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0122 SPECIFICATION OF CHECK-VSN AND UNIT NOT ALLOWED
SIR0123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0123 SPECIFICATION OF UNIT MISSING
SIR0124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0124 OPERAND UNIT NOT ALLOWED ON BS2000 <= V11.0
SIR0125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0125 STATE OF VOLUME '(&00)' UNDEFINED. PUBSET NOT COMPLETELY ACCESSIBLE
SIR0126
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0126 DUALCOPY-SUBSYSTEM NOT AVAILABLE; ALL STATEMENTS IGNORED
SIR0127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0127 UNIT HAS NOT SPECIFIED DEVICE TYPE OR DEVICE TYPE OF UNIT AND SUBUNIT DIFFERENT
SIR0128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0128 SUBUNIT HAS NOT SPECIFIED DEVICE-TYPE
SIR0129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0129 DEVICE WITH MN '(&00)' NOT AVAILABLE
SIR0130
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0130 IPL STATEMENT NOT ALLOWED FOR PUBSET WITH ATTRIBUTE LARGE-FILES=*ALLOWED
SIR0131
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0131 'ACTION=*IPL' NOT ALLOWED FOR PUBSETS WITH ATTRIBUTE LARGE-FILES=*ALLOWED; ALL STATEMENTS IGNORED
SIR0132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0132 UNIT FOR VOLUME '(&00)' NOT SPECIFIED; PROCESSING TERMINATES
SIR0133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0133 UNIT ALREADY IN RAID-MODE; SUBUNIT '(&00)' IGNORED
SIR0134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0134 UNIT '(&00)' AND SUBUNIT '(&01)' NOT A DUALCOPY PAIR; PROCESSING TERMINATES
SIR0135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0135 neither device type nor unit specified; statement ignored
Meaning
To identify a device you have to specify the device type or the unit.
Specification of both values is allowed, too. But in this case the
device type implicitly specified by the unit has to be the same as the
explicitly specified device type.
SIR0136
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0136 INSTALLATION OF PUBSET WITH VOLUME '(&00)' CAUSES CHANGE OF HIGH AVAILABILITY FROM '(&01)' TO '(&02)'. INSERT VOLUME (Y/N)
SIR0137
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0137 EXTENSION OF PUBSET WITH VOLUME '(&00)' CAUSES CHANGE OF HIGH AVAILABILITY FROM '(&01)' TO '(&02)'. INSERT VOLUME (y/n)
SIR0138
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0138 SUBUNIT '(&01)' OF VOLUME '(&00)' IGNORED BECAUSE /START-DUALCOPY OFFLINE NOT SUPPORTED
SIR0139
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0139 extension of pubset with volume '(&00)' causes the loss of high availability; //CREATE-VOLUME statement for volume '(&00)' ignored
SIR0140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0140 Operand 'COPY=*SRPM' supported since BS2000 V12.0
SIR0141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0141 OPERAND 'FILE=*SRPM' DEMANDS 'TO=*PUBSET'
SIR0142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0142 //COPY FILE=*SRPM ALLOWED FOR PUBSET ACTION *INSTALL, ONLY
SIR0143
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0143 STATEMENT '//COPY FILE=*SRPM' IGNORED
SIR0144
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0144 STATEMENT '//COPY FILE=*SRPM' IN THIS ENVIRONMENT NOT POSSIBLE
SIR0145
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0145 for '//copy file=*srpm' volumesets unequal the control-volumeset could not be added to the sm-pubset
Meaning
The specified Volumesets would be generated by SIR, but SIR could
not add this Volumesets to the SM-Pubset. All specified
Volumeset attributes including the attributes of the Control-Volumeset
are lost.
To add these Volumesets to the SM-Pubset, you have to make a second
SIR call or you use the pubset rekonfiguartion commands.
SIR0146
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0146 //copy file=*all/*SRPM allowed for FROM=*DEVICE(DEVICE=<TAPE>), only
SIR0147
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0147 OPERAND TSOSCAT-TYPE=*EXTENDED IS ONLY SUPPORTED FROM BS2000 OSD V6.0B AND LATER VERSIONS; OPERAND IS SET TO *COMPATIBLE!
SIR0148
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0148 device type of volres differs in 'BEGIN-VOLUME-SET-DECLARATION' statement and "MRSCAT'
SIR0149
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0149 type of mrscat entry does not match the value 'volume-set'
SIR0150
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0150 DEVICE TYPE OF PUBRES DIFFERS IN 'DECLARE-PUBSET' STATEMENT AND 'MRSCAT'
SIR0151
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0151 PUBSET TO BE PROCESSED NOT COMPLETELY INACCESSIBLE
SIR0152
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0152 PUBSET TO BE PROCESSED NOT FULLY ACCESSIBLE
SIR0153
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0153 PUBSET NOT FOUND IN 'MRSCAT' OR ENTRY INCOMPLETE OR WRONG. STATEMENT IGNORED
Meaning
- for ACTION=*EXTEND/*IPL the MRSCAT has to contain a valid entry for
the pubset with device type of pubres
- for ACTION=*INSTALL the MRSCAT has to contain a valid entry for
the pubset with device type of pubres or no entry for this pubset
Response
Create or correct the MRSCAT entry and retry. For ACTION=*INSTALL delete
the old entry
SIR0154
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0154 STAM ERROR. STATEMENT IGNORED
SIR0155
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0155 PUBSET '(&00)' LOCKED BY ANOTHER CALLER OF 'SIR'
Meaning
SIR locks the PUBSET when statement execution starts.
SIR0156
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0156 OVERFLOW OF PUBSET LOCKTABLE
Meaning
SIR writes every locked PUBSET in a table of the subsystem SIR. This
table can contain 1024 entries.
SIR0157
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0157 'SYS-ID=*CAT-ID' not allowed for CAT-IDs with more than one digit
Meaning
for CAT-IDs with more than one digit the allowed values of operand SYS-ID
are *STD and 65..192
SIR0158
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0158 for PUBSET-IDs with one digit only SYS-ID=*CAT-ID allowed
SIR0159
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0159 for main and subunit only values in the length of 2 and 4 supported.
SIR0160
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0160 Assignment '//(&00)' for volumesets not allowed
SIR0161
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0161 Assignment '//(&00)' allowed only for Disk 0 of the volumeset for ACTION=*INSTALL
SIR0162
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0162 Assignment '//(&00)' not supported for extension of a volumeset
SIR0163
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0163 no correct '//(&00)' assignment given for //BEGIN-VOLUME-SET-DECLARATION ACTION='(&01)'
SIR0164
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0164 //BEGIN-VOLUME-SET-DECLARATION ACTION='(&00)' not allowed if only volumesets should be processed
SIR0165
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0165 volumeset '(&00)' appears more than once in the Sequence of Assignments
SIR0166
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0166 volumeset '(&00)' locked by another caller of 'sir'
Meaning
SIR locks the volumeset when statement execution starts.
SIR0167
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0167 specification of control volumeset for the pubset does not agree with the values in the MRSCAT
SIR0168
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0168 For //BEGIN-VOLUME-SET-DECLARATION ACTION=*INSTALL/*ADD no MRSCAT-Entry for the specified volumeset has to be registered
Response
The MRSCAT entry has to be deleted. Before, you have to insure, that
the MRSCAT entry is not part of a volumeset/pubset
SIR0169
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0169 IMCAT TASK started
SIR0170
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0170 excat task started
SIR0171
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0171 for generation of volumesets only action=*install/*add is allowed
SIR0172
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0172 mainunit is a GS-Volume; subunit ignored
Meaning
You have to specify the availability of a GS volume while creating it.
SIR0173
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0173 '(&00)' '(&01)' is in global storage
SIR0174
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0174 disk '(&00)' is not a gs volume
Meaning
GS Volumes and other Volumes must not be mixed in a pubset. SIR
decides on the basis of the pubres if you wish a pubset in GS or not
SIR0175
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0175 disk '(&00)' is not on same gs-unit as '(&01)'
Meaning
All GS volumes of a Pubset have to be part of the same GS unit
SIR0176
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0176 for /declare-pubset *S-M(action='(&00)' and //begin-volume-set-declaration action='(&01)' an existing MRSCAT entry of volumeset '(&02)' not allowed
SIR0177
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0177 volumeset '(&00)' is not part of sm-pubset '(&01)'
Meaning
During processing of a pubset, SIR checks if all specified volumesets
are part of the pubset to avoid inconsistency
SIR0178
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0178 free-pubset-lock-error for entry '(&00)'
SIR0179
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0179 volumeset '(&00)' and the sm-pubset have the same id
SIR0180
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0180 //begin-volume-set-declaration action='(&00)' for //declare-pubset pubset-type=*s-m(action=install) not allowed
SIR0181
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0181 specified pubset is not a system-managed pubset
SIR0182
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0182 //begin-volume-set-declaration for the control volume set is missing
SIR0183
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0183 for the control volumeset only //begin-volume-set-declaration action=*install is allowed
SIR0184
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0184 mrscat entry for '(&00)' '(&01)' is missing
SIR0185
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0185 no correct volumeset specified
SIR0186
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0186 operand disk-number in //copy ...,to=*pubset(disk= ) not allowed for a sm-pubset
SIR0187
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0187 //copy not allowed for generation of stand alone volumesets
SIR0188
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0188 invalid vsn specification for a disk
SIR0189
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0189 assignment '//(&00)' in this context not allowed; statement number: '(&01)'
SIR0190
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0190 insertion of volumeset '(&00)' to sm-pubset terminated with error
Meaning
If this Message is shown for the control volumeset, only the volumeset
attributes could not be set
SIR0191
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0191 device type of volres in '//begin-volume-set-declaration' statement and mrscat entry different
SIR0192
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0192 Type of MRSCAT entry does not match the Value of //DECLARE-PUBSET assignment
SIR0193
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0193 Operand USAGE for control volumeset set to '*STD'
Meaning
for control volumesets the operand USAGE unequal *STD is not allowed
SIR0194
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0194 Disk with MN '(&00)' of Devicetype '(&01)'. Mixing disks of this Devicetype and other Devicetypes in a Pubset/Volumeset is not allowed
SIR0195
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0195 assignment '//(&00)' not allowed for single feature pubsets
SIR0196
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0196 WARNING: volumeset attributes are ignored for generation of stand alone volumesets
SIR0197
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0197 Specification of Device MN missing
Meaning
Device Units have to be specified in order to generate a pubset made of
GS volumes
SIR0198
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0198 Assignment '//(&00)' not allowed for //BEGIN-VOLUME-SET-DECLARATION ACTION=*ADD
SIR0199
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0199 (&00)-ERROR, INTERNAL ERRORCODE: '(&01)'
SIR0200
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0200 CATALOG CREATION STARTED
SIR0201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0201 CATALOG CREATION TERMINATED NORMALLY
SIR0204
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0204 VALUE OF 'CAT-SIZE' GREATER THAN (&00); REDUCED TO MAXIMUM SIZE
SIR0205
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0205 VALUE OF 'CAT-SIZE' ODD. STATEMENT IGNORED
SIR0206
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0206 CATALOG SIZE GREATER THAN (&00) PAGES; ONLY SIZE SPECIFIED FOR PUBRES USED
Meaning
The catalog size is restricted to (&00) PAM pages. The specified value
(sum of 'CAT-SIZE' values per disk) exceeds this limit. In this case
the catalog is created on PUBRES only in the size specified for this disk.
SIR0207
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0207 CATALOG CREATION FOR VOLUMESET '(&00)' STARTED
SIR0208
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0208 TSOSCAT format of Volset '(&00)' differs from the TSOSCAT format of the pubset; processing terminated
Meaning
You can add a volset to a SM Pubset only if the volset and the pubset
have the same TSOSCAT format.
Where applicable try to build the SM-Pubset without this volset
SIR0210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0210 CATALOG CREATION TERMINATED ABNORMALLY
SIR0220
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0220 CREATION OF CATALOG EXTENTS STARTED
SIR0221
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0221 CREATION OF CATALOG EXTENTS TERMINATED NORMALLY
SIR0222
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0222 CREATION OF CATALOG EXTENTS TERMINATED ABNORMALLY; PROCESSING CONTINUES
SIR0223
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0223 CREATION OF CATALOG EXTENT DISK '(&00)' FAILED
SIR0224
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0224 FILE CATALOG OF PUBSET '(&00)' HAS ALREADY REACHED ITS MAXIMUM SIZE. NOT ALL //CREATE-CATALOG STATEMENTS CAN BE PROCESSED
SIR0225
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0225 //CREATE-CATALOG FOR DISK '(&00)' CAN BE EXECUTED ONLY PARTIALLY BECAUSE OF SIZE LIMIT FOR FILE CATALOG
Meaning
The highest usable size of the TSOSCAT is limited to
- 16384 HPs for Pubsets/Volsets with TSOSCAT-TYPE=*NORMAL
- 32368 HPs for Pubsets/Volsets with TSOSCAT-TYPE=*LARGE
- 64016 HPs for Pubsets/Volsets with TSOSCAT-TYPE=*EXTRA-LARGE
If the TSOSCAT would exceed this limit, SIR executes the CREATE-CATALOG
statements until the limit is reached, rounded up to the next allocation
unit.
SIR0226
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0226 FIRST EXTENT OF 'CONVCAT' WILL BE CREATED ON PUBRES
SIR0227
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0227 CREATION OF 'CONVCAT' TERMINATED ABNORMALLY
SIR0228
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0228 CREATION OF CATALOG EXTENTS FOR VOLUMESET '(&00)' STARTED
SIR0300
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0300 'CREATE-VOLUME' FUNCTION STARTED
SIR0301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0301 'CREATE-VOLUME' FUNCTION TERMINATED NORMALLY
SIR0302
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0302 'CREATE-VOLUME' FUNCTION TERMINATED ABNORMALLY
SIR0303
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0303 NOT ENOUGH ENTRIES LEFT IN ONLINE CATALOG FOR NEW DISKS OF PUBSET
Meaning
For allocation unit 6KB a pubset can have up to 32 disks. For other
allocation units the maximum number of disks is 255.
SIR0304
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0304 UPDATE OF PUBRES ONLINE CATALOG FAILED
SIR0305
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0305 UPDATE OF PUBSET CONFIGURATION FAILED; ERROR CODE '(&00)'
Meaning
Integration of the specified disks into a pubset or volumeset is not
possible.
Error code description:
01) initialisation of one or more disks terminated abnormally. For further
information please see messages above
02) a disk different to the pubres / volres could not be mounted
03) a disk different to the pubres / volres could not be released
04) the volumeset sepcified for extention is not part of the SM-Pubset.
You can extent volumesets which are part of the SM-Pubset specified
in the //DECLARE-PUBSET statement, only
05) the state of the pubset / volumeset has changed from accessible to
inaccessible
06) the pubres / volres could not be mounted
07) the pubres / volres could not be released
08-0D)
access to the SVL of pubres / volres not possible
0E) extention of SF-Pubset in accessible state terminated with error.
For further information please see messages above
0F) extention of volumeset in accessible state terminated with error.
For further information please see messages above
10) number von volumes in pubset / volumeset exeecds the limit
11) access to MRSCAT failed. For further information see also previous
messages
12) vsn (DISK-NUMBER) of pubres/volres is specified for pubset/volset
extension. But this vsn is allowed for a pubset/volset installation,
only
SIR0306
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0306 '//CREATE-VOLUME'-FUNCTION FOR VOLUME-SET '(&00)' STARTED
SIR0307
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0307 Connection of subsystem VOLIN not possible. Errorcode '(&00)'. In SYSTEM MODE: /HELP-MSG NVL0100
SIR0308
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0308 DISK FOR VSN '(&00)' EXCEEDS CAPACITY OF 32 GB; DISK REJECTED
Meaning
In a SIR run with ACTION=*INSTALL is the operand
LARGE-DISKS-ALLOWED=*NO specified in the //DECLARE-PUBSET assignment
or for ACTION=*EXTEND the coresponding pubset attribute is set.
Response
- for ACTION=*INSTALL you have to set the operand LARGE-DISKS-ALLOWED
to *YES.
- for ACTION=*EXTEND you have to set the coresponding attribute of the
pubset using the command /SET-PUBSET-ATTRIBUTES ...,
LARGE-VOLUMES=*ALLOWED before you restart the SIR run.
SIR0400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0400 CREATION OF PAGING FILES STARTED
SIR0401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0401 CREATION OF PAGING FILES TERMINATED NORMALLY
SIR0402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0402 CREATION OF PAGING FILES TERMINATED ABNORMALLY
SIR0403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0403 REQUEST OF PAGING FILE FOR DISK '(&00)' TOO LARGE. (&01) MB WILL BE ALLOCATED
SIR0404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0404 CREATION OF PAGING FILE ON DISK '(&00)' FAILED
SIR0405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0405 WARNING: ONLY (&01) MB HAVE BEEN ALLOCATED AS PAGING FILES ON PUBSET '(&00)'
SIR0406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0406 SIZE OF PAGING AREA REQUESTED FOR DISK (&00) MORE THAN 128 MB; SIZE REDUCED TO (&01) MB
Meaning
The paging area is restricted to 128 MB per disk. Rounding up a value to
set the paging area on cylinder and unit boundary may increase this value
beyond the limit. In this case the paging area is reduced to the next
lowest cylinder and unit boundary.
SIR0407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0407 PAGING FILE ALREADY EXISTING ON VOLUME '(&00)'; ASSIGNMENT NOT PERFORMED
SIR0408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0408 //CREATE-PAGING-FILE for DRV-Pubsets not allowed; statement ignored
Meaning
Creation of a paging file on a pubset which is running in DRV mode is
allowed from BS2000 OSD V2.0 on.
SIR0500
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0500 //CREATE-IPL-VOLUME: PROCESSING STARTED
SIR0501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0501 //CREATE-IPL-VOLUME: PROCESSING TERMINATED NORMALLY
SIR0502
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0502 //CREATE-IPL-VOLUME: PROCESSING TERMINATED ABNORMALLY
SIR0510
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0510 IPL FILE '(&00)' IS NOT OR IS NOT COMPLETELY ON DISK '(&01)'
SIR0511
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0511 //CREATE-IPL-VOLUME NOT POSSIBLE FOR DISK '(&00)'
SIR0512
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0512 //CREATE-IPL-VOLUME FAILED ON DISK '(&00)'
SIR0513
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0513 NO //CREATE-IPL-VOLUME STATEMENT COULD BE EXECUTED
Meaning
The statement //CREATE-IPL-VOLUME could not be processed
SIR0514
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0514 WRONG FORMAT OF IPL FILE '(&00)'
Meaning
The file does not contain an executable phase or the phase is not a
non-key phase.
SIR0515
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0515 DESCRIPTOR BLOCK OF IPL FILE '(&00)' NOT FOUND
SIR0516
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0516 BLOCK DESCRIPTOR OF IPL FILE '(&00)' NOT FOUND
SIR0517
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0517 ACCORDING TO 'TSOSCAT', IPL FILE '(&00)' NOT OR NOT COMPLETELY ON DISK '(&01)'
SIR0518
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0518 'NGVBOT0' ERROR; RETURN CODE: (&00)
Meaning
(&00): return codes of the routine NGVBOT0 (prepares the BOOT):
01: device type not supported.
03: controller type not supported.
05: device type not supported with specified HSI.
07: first extent of BOOTSAVE file too small.
09: numbers of TXT blocks are not ascending.
0B: unsuccessful CCW-generator call
0D: space for CCW's too small
0F: ambiguous HSI specification
FF: BOOT0 block is inconsistent.
Response
Returncode 07: Erase BOOTSAVE file and call SIR again.
Other return codes: Send error note.
SIR0519
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0519 CREATION OR MODIFICATION OF IPL FOR A PUBSET WITH SYS-ID=*STD NOT ALLOWED; EXECUTION TERMINATED
Meaning
For creation of a home pubset (generation of IPL), the pubset has to
have a unique SYS-ID, in order to prevent simultaneous access of multiple
systems to one resource, e.g. disks or tapes.
Response
Please change the SYS-ID of the pubset using the command
/SET-PUBSET-ATTRIBUTES and try the function //CREATE-/MODIFY-IPL-VOLUME
again.
SIR0520
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0520 IPL FILE '(&00)' NOT OR NOT COMPLETELY ON DISK '(&01)'. MOVE FILE TO DISK '(&01)'? REPLY (Y=YES; N=NO)
SIR0521
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0521 FILE '(&00)' ALREADY EXISTS. OVERWRITE? REPLY (Y=YES; N=NO)
SIR0522
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0522 FILE '(&00)' ALREADY EXISTS. FILE WILL NOT BE OVERWRITTEN
Meaning
SIR does not overwrite files if it is running in a procedure or in a
batch job.
SIR0523
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0523 //CREATE-IPL-VOLUME: FILE CHECK STARTED
SIR0524
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0524 //CREATE-IPL-VOLUME: CHECK OF FILES TERMINATED
SIR0525
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0525 //MODIFY-IPL-VOLUME: FILE CHECK STARTED
SIR0526
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0526 //MODIFY-IPL-VOLUME: FILE CHECK TERMINATED
SIR0527
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0527 THE FILE '(&00)' DOES NOT CONTAIN THE REQUIRED '(&01)' LLM
SIR0528
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0528 THE SIZE OF FILE (&00) EXCEEDS THE MAXIMUM SIZE OF (&01) PAM-PAGES
SIR0600
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0600 //MODIFY-IPL-VOLUME: PROCESSING STARTED
SIR0601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0601 //MODIFY-IPL-VOLUME: PROCESSING TERMINATED NORMALLY
SIR0602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0602 //MODIFY-IPL-VOLUME: PROCESSING TERMINATED ABNORMALLY
SIR0611
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0611 //MODIFY-IPL-VOLUME NOT POSSIBLE FOR DISK '(&00)'
SIR0612
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0612 //MODIFY-IPL-VOLUME ON DISK '(&00)' FAILED
SIR0613
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0613 IPL FILE '(&00)' NEITHER REFERRED TO IN //MODIFY-IPL STATEMENT FOR DISK '(&01)' NOR FIXED IN SVL OF THIS DISK
Meaning
IPL is only available on a disk if the IPL file (containing the section
BOOT, IPL, SLED) is fixed in the SVL (standard volume label) of this
disk.
The IPL-REP and SLED-REP FILES don't have to be fixed in the SVL to load
the IPL from this disk.
SIR0614
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0614 *** NO '(&00)' FILE ON DISK '(&01)' ***
SIR0615
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0615 HSI PARAMETER NO LONGER SUPPORTED
SIR0616
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0616 BLKSIZE OF REPFILE (&00) NOT ALLOWED
Meaning
Only BLKSIZE (STD,1) or (STD,2) are allowed for IPL-REP-FILE and
SLED-REP-FILE.
Response
Please try again with correct Repfile !
SIR0617
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0617 For private disks the specified file name has to be unequal to the destination file; operand '(&00)' set to '*UNCHANGED'
SIR0618
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0618 DMS-Error '(&00)' while erasing an existing snapfile; new snapfile is cataloged with filename '(&01)'
Meaning
There is already a SNAPFILE in this pubset. To generate a new SNAPFILE,
SIR has to erase the old one, but the erasing of this file
terminated with error '(&00)'. In spite of this the new SNAPFILE is
cataloged with filename '(&01)'
Response
To activate the new SNAPFILE, you have to erase the old one and rename
the new SNAPFILE '(&01)' to 'SNAPFILE'
SIR0700
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0700 //COPY: PROCESSING STARTED
SIR0701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0701 //COPY STATEMENT '(&00)' TERMINATED ABNORMALLY. SIR ERROR CODE: '(&01)'; SPECIAL ERROR CODE: '(&02)'
Meaning
(&01): SIR error code:
01: WRITE CAT error 02: REQM error
03: RELM error 04: OPEN error
05: CLOSE error 06: FSTAT error
07: ERASE error 08: file error
09: catalog error 10: IMPORT error
11: COPY error 12: JV not supported
13: COPY aborted 14: not handled
15: not supported 16: BTAM error at tape header
17: tape not an ARCHIVE tape 18: wrong ARCHIVE tape
19: UPAM error 20: BTAM error
21: end of statement 22: RELEASE error
23: end of file not reached.
SIR0702
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0702 FILE '(&00)' ALREADY CATALOGED. OVERWRITE? REPLY (Y=YES; N=NO)
SIR0703
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0703 FILE '(&00)' CREATED
SIR0704
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0704 CREATION OF FILE '(&00)' TERMINATED ABNORMALLY
SIR0705
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0705 FILE '(&00)' NOT FOUND IN SEQUENCE STARTING WITH TAPE '(&01)' IN STATEMENT '(&02)'
SIR0706
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0706 FILE '(&00)' ALREADY ON DISK '(&01)'. OVERWRITE? REPLY (Y=YES; N=NO)
Meaning
The file is already on the F1 label of the disk.
SIR0707
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0707 COPYING OF FILE '(&00)' TERMINATED ABNORMALLY
SIR0708
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0708 FILE '(&00)' ALREADY CATALOGED. FILE IS NOT OVERWRITTEN
Meaning
The file is not overwritten due to the operand value REPLACE-OLD-FILES=NO
in the //COPY statement.
SIR0709
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0709 FILE '(&00)' ALREADY CATALOGED ON PRIVATE DISK. FILE IS NOT OVERWRITTEN
Meaning
The file is not overwritten due to the operand value REPLACE-OLD-FILES=NO
in the //COPY statement.
SIR0710
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0710 '(&00)' IS JOB VARIABLE (JV). JVS NOT COPIED
Meaning
Program SIR does not copy job variables.
SIR0711
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0711 '(&00)' IS FILE GENERATION GROUP (FGG). FGG-S ARE NOT COPIED
Meaning
Program SIR does not copy file generation groups.
SIR0712
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0712 COPYING OF FILE '(&00)' TERMINATED ABNORMALLY. GLOBAL ERROR CODE: '(&01)'; SPECIAL ERROR CODE: '(&02)'. IN SYSTEM MODE: /HELP-MSG (&01)
Meaning
For more detailed information about the global error code enter /HELP-MSG
in system mode.
SIR0713
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0713 BTAM ERROR. DMS ERROR CODE: '(&00)'. CONTINUE PROCESSING? REPLY (C=CONTINUE; T=TERMINATE). IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
Response
C : processing is continued.
<EOT>: processing is continued.
T : processing is terminated.
SIR0714
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0714 BTAM ERROR. DMS ERROR CODE: '(&00)'. PROCESSING CONTINUES. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
SIR0715
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0715 BTAM ERROR. DMS ERROR CODE: '(&00)'. PROCESSING TERMINATED. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
SIR0716
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0716 PARTIALLY SAVED VERSION OF FILE '(&00)' ON TAPE. PARTIALLY SAVED FILES ARE NOT COPIED
Meaning
Program SIR does not copy partially saved files.
SIR0717
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0717 '(&00)' IS A FILE MIGRATED BY THE PROGRAM 'HSMS'. THESE FILES ARE NOT COPIED
Meaning
Program SIR does not copy files migrated by HSMS.
SIR0718
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0718 //COPY STATEMENT '(&00)' TERMINATED ABNORMALLY. GLOBAL ERROR CODE: '(&01)'; SPECIAL ERROR CODE: '(&02)'. IN SYSTEM MODE: /HELP-MSG (&01)
Meaning
For more detailed information about the global error code enter /HELP-MSG
in system mode. The special error code is only set if detailed information
exists.
SIR0719
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0719 COPYING OF FILE '(&00)' ABNORMALLY TERMINATED. PREFIX (REMOVE) '(&01)' NOT PART OF THIS FILE NAME
SIR0720
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0720 FILE NAME CONSISTING OF PREFIX '(&00)' AND FILE NAME '(&01)' IS TOO LONG. COPYING TERMINATED ABNORMALLY
SIR0721
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0721 INPUT FILE '(&00)' CATALOGED ON PRIVATE DISK. 'FROM=*PVS' IS SPECIFIED. COPYING OF FILE TERMINATED ABNORMALLY
SIR0722
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0722 //COPY: PROCESSING TERMINATED
SIR0723
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0723 FILE '(&00)' ALREADY CATALOGED; FORMAT '(&01)'. OVERWRITE IN NEW FORMAT '(&02)'? REPLY (Y=YES; N=NO)
SIR0724
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0724 ADAPTION OF FILE NAME '(&00)' TO PARTIALLY QUALIFIED FILE NAME '(&01)' TOO LONG. COPYING OF THIS FILE TERMINATED ABNORMALLY
SIR0725
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0725 FILE '(&00)' CREATED IN FORMAT '(&01)'
SIR0726
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0726 CREATION OF FILE '(&00)' TERMINATED ABNORMALLY. CONVERSION OF FORMAT NECESSARY BUT NOT POSSIBLE
SIR0727
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0727 COPYING OF FILE '(&00)' TERMINATED ABNORMALLY. PUBSET WITH CAT ID '(&01)' NOT IMPORTED (/IMPORT-PUBSET)
SIR0728
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0728 COPYING OF FILE '(&00)' ABNORMALLY TERMINATED. FILE SIZE EXCEEDS THE LIMIT OF 32GB
SIR0801
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0801 INFORMATION ABOUT OPERAND DESIRED? REPLY (Y=YES; N=NO)
SIR0802
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0802 FURTHER INFORMATION ABOUT OPERAND DESIRED? REPLY (Y=YES; N=NO)
SIR0803
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0803 COMMAND NOT SUPPORTED BY 'SIR'
SIR0804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0804 error occured while reading MRSCAT entry for pubset / volumeset '(&00)'; internal errorcode: '(&01)'
SIR0805
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0805 disk '(&00)' is not part of a sf-pubset or a volumeset; execution terminated
SIR0806
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0806 Pubset '(&00)' is not accessible; execution terminated
Meaning
The pubset which contains the specified disk has to be imported.
Response
Please import the specified pubset and try again
SIR0807
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0807 Volumeset '(&00)' of pubset '(&01)' which contains the disk is not accessible; execution terminated
SIR0808
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0808 specified disk '(&00)' is not part of pubset / volumeset '(&01)'
SIR0809
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0809 disk '(&00)' is not accessible
SIR0810
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0810 Releasing of disk '(&00)' not possible
SIR0811
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0811 Erasing of file '(&00)' not possible; dms error code: '(&01)'; in system mode: /help-msg dms(&01)
SIR0812
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0812 no IPL files found
Meaning
Reason:
a) the disk is not bootable, so no IPL files exsits
b) the disk is bootable for a BS2000 version before OSD V3.0a
Response
a) no further action necessary
b) you can erase all IPL files of this disk without risk, now
SIR0813
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0813 another file with name '(&00)' currently exists in the Pubset; erasing of file on specified disk not possible
SIR0814
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0814 //DELETE-IPL-FACILITY for GS-Volumes not necessary and not supported
SIR0815
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0815 IPL successfully removed
SIR0816
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0816 WITH OPERAND 'DISK=*PUBLIC(..)' ONLY PUBLIC VOLUME PERMITTED. STATEMENT IGNORED
SIR0817
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0817 not all IPL files could be erased
SIR0818
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0818 are you sure to remove ipl facility from disk '(&00)' (Y/N)
SIR0900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR0900 TSOSCAT temporary not acceccible by SIR; try again later
Meaning
In the current state of the TSOSCAT SIR cannot modify or extend the
pubset without putting at risk the integrity of it. So the job must be
refused.
One reason of this state is a pending catalog conversion from the
compatible to the extended catalog format.
SIR0997
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
SIR0997 CONTINUATION DESIRED? REPLY (Y=YES; N=NO)
SIR0998
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0998 BUFFER ADDRESS: '(&00)'
SIR0999
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR0999 ENTER READ STATEMENT (RD <PHP-NR: 6-ST.,HEXA>,<VSN: 6-ST.>,<DEV.TYPE: 5-ST. >) OR END STATEMENT (EN)
SIR1000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1000 ERRORS DURING INPUT OF STATEMENTS. 'SIR' TERMINATED ABNORMALLY
SIR1001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1001 UNRECOVERABLE ERROR. 'SIR' TERMINATED ABNORMALLY
SIR1002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1002 'SIR' TERMINATED ABNORMALLY
Meaning
The execution of one or more sets of statements terminated unsuccessfully.
Response
Please check the set of statements and the environment and try again.
SIR1003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1003 execution of last set of statements terminated with grave errors
SIR1004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR1004 execution of last set of statements terminated with minor errors
SIR1005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR1005 SEQUENCE OF STATEMENTS EXECUTED SUCCESSFULLY
SIR1010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1010 'SIR' TERMINATED
SIR1100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1100 CREATION OF SNAP FILE STARTED
SIR1101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1101 CREATION OF SNAP FILE TERMINATED NORMALLY
SIR1102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1102 NO //CREATE-SNAP-FILE STATEMENT ISSUED DESPITE OPERAND VALUE 'ACTION=*INSTALL'
SIR1104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1104 CREATION OF SNAP FILE ON DISK '(&00)' FAILED; ERROR CODE '(&01)'
Meaning
Error code description:
1) the largest free disk block is too small for the required size of
the snap file
2) the specified disk could not be mounted
3) the specified disk could not be released
4) access to the SVL of disk not possible
5) the calculated disk blocks could not be reserved by the DMS
SIR1105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR1105 NOT ENOUGH SPACE AVAILABLE FOR SNAP FILE ON DISK '(&00)'
SIR1200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR1200 Value of Operand LARGE-FILES-ALLOWED switched to *NO
Meaning
Pubsets which are generated in format key could not contain files
exceeding the size of 32GB. But disks with a capacity over 32GB are
possible in this environment, so the value LARGE-DISKS-ALLOWED=*YES is
accepted.
SIR2001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR2001 Statement '(&00)' not allowed for GS-Volumes
SIR2002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR2002 UNIT '(&00)' SPECIFIED MORE THAN ONCE; DISK WITH NUMBER '(&01)' IGNORED
Meaning
The specified UNIT is used in more than one CREATE-VOLUME assignments or
values of UNIT and SUBUNIT are equal.
The CREATE-VOLUME assignment with disk number '(&01)' is ignored to
prevent the dual use of this UNIT.
Response
Repeat the CREATE-VOLUME assignment with correct UNIT specification.
SIR2011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR2011 ERROR IN FILE MACRO: '(&00)'
SIR2100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR2100 '//(&00)' not allowed for pubsets made of GS Volumes; statment ignored
SIR2101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR2101 for pubsets made of GS volumes ACTION='*IPL' not allowed
SIR3000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3000 OPERAND 'PUBSET' ALLOWS ONLY ONE-DIGIT VALUES
SIR3001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3001 'WRITE CATALOG' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3002 REQUEST MEMORY ERROR
SIR3003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3003 RELEASE MEMORY ERROR
SIR3004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3004 'OPEN' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3005 'CLOSE' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3006 FSTAT ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3007 'ERASE' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3008 'FILE' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3009 ERROR IN UPDATING CATALOG ENTRY. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3010 'IMPORT' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3011 'COPY' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR CODE>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3012 JOB VARIABLES NOT TRANSFERRED
SIR3013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3013 'COPY' STATEMENT ABORTED
Meaning
Possible cause:
- an error occurred in another //COPY statement which prevents processing
of this statement.
- invalid processing of a statement with the FILE=*ALL operand.
SIR3014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3014 //COPY STATEMENT NOT PROCESSED OWING TO ERROR IN ANOTHER //COPY STATEMENT
SIR3016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3016 'BTAM' ERROR AT START OF TAPE. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3017 NO VALID 'ARCHIVE' FORMAT ON TAPE. 'SIR' ONLY SUPPORTS TAPES WRITTEN BY ARCHIVE (VERSION 2.4 OR HIGHER)
SIR3018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3018 WRONG 'ARCHIVE' TAPE. POSSIBLE CAUSES: WRONG CONTINUATION TAPE COUNTER OR WRONG 'ARCHIVE SEQUENCE' NUMBER OR WRONG 'SUBSAVE' NUMBER
SIR3019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3019 'UPAM' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3020 'BTAM' ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3022 ERROR WHEN DELETING TFT ENTRY. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR>
Meaning
An error occurred when trying to delete the TFT entry by means of the
RELEASE macro.
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3023 'FILE END' INDICATOR MISSING. 'ARCHIVE' HAS NOT SET THIS INDICATOR
SIR3024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3024 'SIR' ONLY SUPPORTS TAPES CREATED WITH 'ARCHIVE' FUNCTION 'EXPORT'
SIR3026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3026 ARCHIVE-TAPEBLOCK INCONSISTENT
Meaning
A Tapeblock was read, which does not contain a correct ARCHIVE-Tapeblock
SIR3027
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR3027 File not convertible with PAMINT
Meaning
Special errorcode
0100: FCBTYPE of file not supported by PAMINT.
0101: Subsystem PAMINT could not be connected by SIR. File conversions
not possible.
Please check the installation of PAMINT.
0102: Subsystem PAMINT not available. File conversions not possible.
0103: Request of SIR rejected by PAMINT
0104: BLKSIZE of source and destination file incompatible
SIR3028
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR3028 PAMINT RETURNS DMS ERROR. IN SYSTEM MODE: /HELP-MSG <SPECIAL ERROR>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3029
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR3029 PAMINT RETURNS ILAM ERROR. IN SYSTEM MODE: /HELP-MSG PLA<SPECIAL ERROR>
Meaning
More detailed information about the cause of the error can be obtained
from the special error code of the error message already issued.
The meaning of this error code can be ascertained by entering /HELP-MSG in
system mode.
SIR3030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR3030 'SYS-ID' ONLY IMPORTANT FOR 'ACTION=*INSTALL'. OPERAND IGNORED
Meaning
If the value of the ACTION operand is not *INSTALL, the SYS-ID is read
from the volume label of the PUBRES disk.
SIR4000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR4000 ILLEGAL STATEMENT
Meaning
If SIR is started by a user ID which is not TSOS, only the statements
//COPY, //HELP and //LIST are allowed.
SIR4001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR4001 FILE NAME '(&00)' USED IN //CREATE-IPL-VOLUME OR //MODIFY-IPL-VOLUME STATEMENT IS TOO LONG
Meaning
The path name of a file may not have more than 54 characters after
completion with cat ID and user ID.
SIR4002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR4002 PATH NAME '(&00)' OF FILE IS USED MORE THAN ONCE IN //CREATE-IPL-VOLUME OR //MODIFY-IPL-VOLUME STATEMENTS FOR DIFFERENT DISKS
SIR5002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR5002 TIME OF WAITING FOR EXPORT-PUBSET PROCESSING OVER; SIR PROCESSING CONTINUES
Meaning
Export of the pubset could not be completly executed in the duration
specified by SIR. However, SIR continues processing to resolve depencies
between SIR and the export processing if necessary.
SIR7000
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7000 UTILITY ROUTINE '(&00)' (VERSION (&01)) READY FOR INPUT. DATE OF GENERATION: (&02)
Meaning
(&02): date of generation: (yyyymmdd).
SIR7001
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7001 EXECUTION OF UTILITY ROUTINE '(&00)' STARTED
SIR7002
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7002 UTILITY ROUTINE '(&00)' TERMINATED
SIR7010
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7010 STATEMENT EDITOR STARTED
SIR7011
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7011 STATEMENT EDITOR TERMINATED
SIR7012
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7012 STATEMENT NOT PROCESSED DUE TO SYNTAX ERROR. CORRECT STATEMENT
SIR7013
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7013 MORE OPERANDS SPECIFIED THAN ALLOWED. STATEMENT IGNORED
Meaning
There is an illegal operand in the statement.
Response
Correct input and retry.
SIR7014
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7014 REQUIRED OPERAND MISSING. STATEMENT IGNORED
Meaning
The statement does not contain all the operands needed.
Response
Enter the missing operand(s).
SIR7015
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7015 ABBREVIATION '(&00)' IN STATEMENT AMBIGUOUS. STATEMENT IGNORED
Response
Reenter the correct statement with unambiguous abbreviations.
SIR7016
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7016 OPERAND VALUE '(&00)' INVALID OR UNKNOWN. STATEMENT IGNORED. CORRECT INPUT
SIR7017
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7017 STATEMENT CANNOT BE DELETED. 'DELETE-STATEMENTS' FUNCTION NOT PROCESSED
Meaning
The DELETE-STATMENTS function was ignored because the statement with the
specified number does not exist.
SIR7018
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7018 MAX. NUMBER OF STATEMENTS ALREADY GENERATED. 'ADD' FUNCTION NOT PROCESSED
Meaning
The ADD function in the editor cannot be processed since the maximum
number of statements has been generated.
SIR7019
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7019 NO STATEMENTS GIVEN OR '//END' READ
Response
Enter statements and start execution with '//START-EXECUTION'
SIR7020
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7020 INVALID KEYWORD IN INPUT STRING. STATEMENT IGNORED
Meaning
An unknown keyword was entered in a statement or an operand of a
statement.
Response
Enter the correct keyword at the next request.
SIR7021
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7021 OPTION STRING NOT FOUND
Meaning
The string entered does not contain a valid OPTION keyword.
SIR7022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7022 INVALID DEVICE TYPE '(&00)'. STATEMENT IGNORED
Meaning
Device type (&00) is unknown.
Response
Repeat the statement with the correct device type.
SIR7023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7023 INVALID VOLUME TYPE '(&00)'. STATEMENT IGNORED
Meaning
Volume type (&00) is unknown to FDDRL.
Response
Repeat the statement with the correct volume type.
SIR7052
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SIR7052 ENTER SPECIFIC STATEMENT OR 'END'
Meaning
If a statement is entered with operand(s), it will be added to the
list of statements already entered. If 'END' is entered, the current
'ADD' subfunction is terminated.
SIR7054
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 98
Warranty : NO
SIR7054 ENTER LIST SUBFUNCTION OR 'END'. REPLY ('+'=SCROLL FORWARD; '-'=SCROLL BACK; END=TERMINATE LST FUNCTION)
Response
END: LST function is to be terminated
+ : show the next page
- : show the previous page.
SIR7056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7056 ENTER EDIT SUBFUNCTION
Meaning
The editor expects a subfunction to be executed.
Response
ADD: add further statement(s)
DEL: delete one or all statements (input: 'DEL n' or 'DEL ALL')
LST: show all generated statements
REN: renumber all generated statements
HLT: end the command editor.
SIR7057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7057 ENTER EDIT OPERATION OR '//START-EXECUTION'
SIR7058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7058 do you wish to terminate program (&00) (y/n)
SIR7059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7059 no statements given
SIR7100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR7100 STATEMENT IGNORED
SIR8021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8021 Assignment '(&00)' only allowed on BS2000 Versions higher or Equal '(&01)'
SIR8022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8022 Operand '(&00)' only allowed on bs2000 versions higher or equal '(&01)'
SIR8100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8100 VSN OF PRIVATE DISK NOT ALLOWED FOR //INITIALIZE-PUBLIC-VOLUME
SIR8101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8101 VSN OF PUBLIC DISK NOT ALLOWED FOR //INITIALIZE-PRIVATE-VOLUME
SIR8202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8202 installation unit '(&00)' not installed with IMON; using standard filenames
SIR8203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8203 installation of unit '(&00)' incomplete! using standardname for file with logical id '(&01)'
SIR8995
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8995 Memory table full. Entry not added
SIR8996
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8996 Error while releasing memory! address '(&00)', class '(&01)', length '(&02)'
SIR8997
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8997 error while requesting memory; retry (Y/N)
SIR8998
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8998 memory already allocated: caller '(&00)', address '(&01)', class '(&02)', length '(&03)'
SIR8999
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR8999 internal error occured at '(&00)' while calling '(&01)'; internal errorcode '(&02)'
SIR9A02
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR9A02 wrong or incomplete syntax file installed for subsystem sir
SIR9000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9000 ERROR X'(&00)' DURING INITIALIZATION OR LOADING OF SUBSYSTEM 'SIR'. 'SIR' TERMINATED
Meaning
Error code description:
x'0002FFFF': Called function not available
Reason: the subsystem SIR is not or not correctly defined
in the subsystem catalog
x'0003FFFF': Interface error
Reason: the requested version of subsystem SIR is not
available. Probably the generation of the
subsystem catalog is not correct.
x'0041FFFF': Error during subsystem connection setup
Reason: see detailed console messages
Response
Please contact the system administrator
SIR9001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9001 SUBSYSTEM NOT DECLARED
Meaning
The subsystem SIR is not installed or the installation is not complete
Response
Please contact the system administrator
SIR9002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9002 VERSION OF BS2000 AND (&00) NOT COMPATIBLE
Meaning
The program (&00) started is not released for the BS2000 version
of the current system.
SIR9003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9003 Subsystem SIR Inconsistent. SIR terminated
Meaning
The requested function is not supported by the subsystem SIR. Probably the
installation of the subsystem is wrong
Response
Please contact the system administator
SIR9004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9004 SUBSYSTEM 'SIR' CANNOT BE LOADED VIA COMMAND /START-SUBSYSTEM
Meaning
The execution of subsystem SIR is permitted implicit with start of program
SIR, only
Response
Please use the command /START-SIR respectively /SIR to start the program
SIR
SIR9005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR9005 ERROR WHILE INSTALLING NEW MESSAGE FILE
Meaning
error occured while copying file SYSMES.SIR.xxx.TPR.NEW.
possible reason:
a) subsystem SIR already used by another task.
b) message file is protected with a file protection unequal ACCESS=READ
Response
a) cancel all connections to subsystem SIR (to do this, induce all
users to exit SIR). After that start SIR again in a userid with
privileg TSOS to complete the installation of the message file.
b) remove the active file protection an start SIR again.
SIR9006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SIR9006 INSTALLATION OF MESSAGE FILE NOT COMPLETLY PROCESSED; MESSAGE FILE NOT UP TO DATE; PROCESSING CONTINUES
Meaning
The system administrator has copied a new SIR message file into the
system. But the installation of the message file is not completly
processed.
Response
The system administrator have to start SIR in a userid with TSOS privileg
to complete the installation of the message file.
SIR9998
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9998 (&00) ERROR
SIR9999
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SIR9999 (&00)-ERROR, INTERNAL ERRORCODE: '(&01)'