Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0001 SPCONV subsystem cannot be loaded without SPOOL subsystem.
Response
Load the SPOOL subsystem by means of the /START-SUBSYSTEM command.
Subsequent load the SPCONV subsystem.
SFL0002
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0002 Memory allocation error for class '(&00)' memory.
Response
Contact the system administrator.
SFL0005
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0005 Tsn '(&00)' : Cascade of filters not supported in the frame of the interoperability.
SFL0006
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0006 Tsn '(&01)' : Memory allocation error for class '(&00)' memory.
Response
Contact the system administrator.
SFL0007
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0007 Tsn '(&02)' : System error: '(&00)' interface error '(&01)'.
Meaning
An error is occurred during the use of a system interface .
(&00) : name of the system interface.
(&01) : error code returned by the system interface.
Response
Contact the system administrator.
SFL0008
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0008 Tsn '(&02)' : Filter '(&00)' loading failed. $PBBND1 interface error '(&01)'.
Meaning
An error is occurred during the loading of the filter.
(&00) : name of the filter.
(&01) : error code returned by the $PBBND1 interface.
Response
Contact the system administrator.
SFL0009
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0009 Tsn '(&00)' : Internal inconsistency.
Meaning
An incoherence is appeared in a table used by the filter subsystem.
Response
Stop and reload the filter subsystem.
SFL0010
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0010 Tsn '(&02)' : Filter selection failed to convert the input format '(&00)' into the output format '(&01)'
Response
Check the definition of the filter in the SPOOL PARAMETER file.
SFL0011
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0011 Tsn '(&00)' : Read error on SPOOL PARAMETER file. Check the file.
Response
Contact the spool administrator.
SFL0012
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0012 Tsn '(&01)' : Filter record '(&00)' of SPOOL PARAMETER file cannot be read.
Meaning
The filter subsystem cannot obtain the filter record (&00)
from the SPOOL PARAMETER file.
Response
Check if the filter record always exists in the SPOOL PARAMETER file or
contact the spool administrator.
SFL0020
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0020 Tsn '(&00)', filter '(&01)': parameter '(&02)' specified in the PRINT-DOC command is incompatible with the filter.
Meaning
The job cannot be filtered because one parameter given in the
PRINT-DOC command is not supported by the filter (&01).
(&02) : - DOCUMENT-FORMAT
- HEADER-PAGE-TEXT
- EFO
Response
Modify the parameter with a MOD-PR-JOB-ATT command or cancel
the job and give a new PRINT-DOC command.
SFL0021
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0021 Tsn '(&00)', filter '(&01)': memory allocation error for class '(&02)' memory.
Response
Contact the system administrator.
SFL0022
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0022 Tsn '(&00)', filter '(&01)': validation error. '(&02)' not specified.
Meaning
No value has been specified for the parameter (&02) either in
the PRINT-DOC command or in the form record of the SPOOL PARAMETER file.
(&02) : - LOOP
- ROTATION-LOOP
Response
Modify the parameter with a MOD-PR-JOB-ATT command or cancel
the job and give a new PRINT-DOC command.
SFL0023
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0023 Tsn '(&00)', filter '(&01)': DMS error '(&02)' during access to file '(&03)'.
Meaning
A DMS error occurred during the access to file (&03). For more
detailed information about the DMS error code enter /HELP-MSG
in system mode or see the BS2000 manual 'SYSTEM MESSAGES'.
SFL0024
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0024 Tsn '(&00)', filter '(&01)': '(&02)' '(&03)' cannot be read from file '(&04)'.
Meaning
The resource specified in the user file doesn't exist or
cannot be read from the resource file (&04).
(&02) : type of the resource (FONT, SOFT-FONT, LOOP, FONT-POOL,...).
(&03) : name of the resource.
Response
Check the resource availability in the resource file.
SFL0025
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0025 Tsn '(&00)', filter '(&01)': user error while filtering of file '(&02)'. Invalid control byte.
Meaning
An invalid control byte or an invalid control byte number
has been specified at the top of the page.
Response
Check the validity of the control bytes in your file.
SFL0026
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0026 Tsn '(&00)', filter '(&01)': user error while filtering of file '(&02)'. Record shorter than FIRST-REC value.
Meaning
A record of the file (&02) has a length shorter than the value
given in the FIRST-REC parameter of the PRINT-DOC command.
Response
Modify the parameter with a MOD-PR-JOB-ATT command or cancel
the job and give a new PRINT-DOC command.
SFL0027
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0027 Tsn '(&00)', filter '(&01)': user error while filtering of file '(&02)'. Channel specified not defined.
Meaning
The file (&02) contains a print control character (pcc) that
refers a channel not defined in the loop.
Response
Use an other loop or modify your file.
SFL0028
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0028 Tsn '(&00)', filter '(&01)': user error while filtering of file '(&02)'. Fob-id not found in macro '(&03)'.
Meaning
No fob-id has been detected in the macro (&04) associated to
the fob given in the PRINT-DOC command.
Response
Use an other fob or modify the macro.
SFL0029
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0029 Tsn '(&00)', filter '(&01)': DMS error '(&02)' during the creation of file '(&03)'.
Meaning
A DMS error occurred during the access to file (&03). For more
detailed information about the DMS error code enter /HELP-MSG
in system mode or see the BS2000 manual 'SYSTEM MESSAGE'.
SFL0030
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0030 Tsn '(&00)', filter '(&01)': '(&02)' record '(&03)' cannot be read.
Meaning
The record (&02) cannot be read from the SPOOL PARAMETER file.
Response
Check if the record is defined in the SPOOL PARAMETER file or
contact the spool administrator.
SFL0031
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0031 Tsn '(&00)', filter '(&01)': read error on SPOOL PARAMETER file. Check the file.
Response
Contact the spool administrator.
SFL0032
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0032 Tsn '(&00)', filter '(&01)': working file '(&02)' already exists.
Meaning
A previous filtering for the same job or for a job having the
same tsn has been unsuccessfully terminated. The intermediate
file created by the filter is still present.
Response
Erase the working file.
SFL0033
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0033 Tsn '(&00)', filter '(&01)': SETL error on file '(&02)'.
Response
Check the validity of the file.
SFL0034
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0034 Tsn '(&00)', filter '(&01)': resource file '(&02)' cannot be opened.
Response
Check if the resource file always exists or
contact the spool administrator.
SFL0035
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0035 Tsn '(&00)', filter '(&01)': configuration file '(&02)' not correctly created.
Meaning
The configuration file must absolutely be a SAM file with
FIXED LENGTH records.
Response
Create a new configuration file with the correct characteristics.
SFL0036
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0036 Tsn '(&00)', filter '(&01)': the received signature is different from the filter signature.
Response
Either another filter has been called between the two calls to
the filter (&01) or the field containing the filter signature
in the interface parameter list has been destroyed between
the two calls.
SFL0037
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SFL0037 Tsn '(&00)', filter '(&01)': user error while filtering of file '(&02)'. Font selection error.
Response
Wrong TYPE1 HP control byte. The font selected with the type1
control byte has not been specified at PRINT-DOC command.