SVR

SVR0000

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0000   (&00) started with device (&01), console (&02), BS2-Sys (&03)

Meaning

&00 = IPL, DIPL or VIPL
The IPL has been started. BS2000 is loaded from device &01, &02 is defined as the
console, and &03 is used as the BS2000 system name.

SVR0001

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0001   (&00) returncode: IPL OK

Meaning

&00 = IPL, DIPL or VIPL
IPL was performed without errors. BS2000 has been started.

SVR0002

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0002   (&00) returncode: (&01)

Meaning

&00 = IPL, DIPL or VIPL IPL was aborted with an error (&01 = cause of error).

Response

Eliminate the error and recommence IPL.

SVR0003

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0003   unknown (&00) returncode: (&01)

Meaning

&00 = IPL, DIPL or VIPL, &01 = Return code IPL was aborted with an unspecified error code.

Response

Back up the RMAssist Trace and send it to the Support Center for diagnosis
(var/opt/SMAW/X2000/tmp/rma_trace*) or create new diagnostic data via the SEM.

SVR0004

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0004   START-(&00) aborted

Meaning

&00 = IPL, DIPL or VIPL The IPL has been aborted.

Response

Recommence IPL. If this does not help, reboot the system.

SVR0005

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0005   START-(&00) aborted ((&01))

Meaning

&00 = IPL, DIPL or VIPL
IPL was aborted with errors (&01 = cause of error).

Response

Recommence IPL. If this does not help, eliminate the errors. A reboot of the system may suffice.

SVR0006

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0006   invalid command (&00)

Meaning

&00 = incorrect RMAssist command
An incorrect command was entered.

Response

Notify Customer Support.

SVR0007

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0007   WARNING: Console device for IPL with VMID=(&00) cannot be checked

Meaning

The specified VMID is wrong or is not configured.

Response

Enter the right VMID.

SVR0008

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0008 (&00) started

Meaning

&00 = IOHDUMP or IVMDUMP
IOHDUMP or IVMDUMP has been started.

SVR0010

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0010   WARNING: IPL INFO FOR VMID (&00) cannot be written - IPL continues"

Meaning

The info file with the IPL data could not be written.

SVR0011

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0011   NO IPL - bs2000 guest system in hold state

Meaning

The BS2000 guest system is in the STOP status.

Response

Re-initialize and start the guest system.

SVR0012

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0012   IOHDUMP=(&00)

Meaning

IOHDUMP &00 is created.

SVR0013

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0013   IOHDUMP finished: OK

Meaning

IOHDUMP has been completed.

SVR0015

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0015   IOHDUMP finished with error

Meaning

Generation of the IOHDUMP was not completed.

Response

Repeat IOHDUMP

SVR0016

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0016   IVMDUMP=(&00)

Meaning

IVMDUMP &00 is being generated.

SVR0017

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0017   IVMDUMP ist fertiggestellt

Meaning

IVMDUMP &00 is being generated.

SVR0018

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0018   IVMDUMP finished with error

Meaning

IVMDUMP was not completed.

SVR0040

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0040   MDEBUG is running - no action

Meaning

The mdebug program is loaded. The specified command is not executed.

Response

Terminate the mdebug program.

SVR0042

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0042   (&00)-Parameter error - no start of IPL

Meaning

&00 = IPL, DIPL or VIPL
An incorrect parameter was entered in the IPL.

Response

Enter the parameter/data correctly.

SVR0048

Destination: CONSOLE     (message is issued without MIP, in English only)

Warranty   : NO

SVR0048   error by SLED DUMP

Meaning

An error occurred when generating or writing a SLED DUMP.

Response

Repeat the DIPL.