Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SEZREVI COMP=SEZMF,VERS=91A,DATE=200212
SEZ0006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0006 INTERNAL SYSTEM ERROR
Meaning
Internal program error.
Response
If the program does not terminate with a dump, initiate a dump and send
an error report for system diagnosis.
SEZ0007
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0007 BLOCK NUMBER DOES NOT EXIST
Meaning
Internal program error.
Response
If the program does not terminate with a dump, initiate a dump and send
an error report for system diagnosis.
SEZ0008
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0008 INVALID BLOCK HEADER
Meaning
Internal program error.
Response
If the program does not terminate with a dump, initiate a dump and send
an error report for system diagnosis.
SEZ0010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0010 MAXIMUM NUMBER OF DATABASES ALREADY REACHED
Meaning
No open is performed for this database.
Response
Release all free databases using RELEASE-USER-RESOURCES and reopen
rejected data base.
SEZ0020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0020 DMS ERROR '(&01)' DURING PROCESSING OF THE FILE '(&00)'. ISSUE /HELP-MSG DMS(&01) IN SYSTEM MODE
Meaning
The file (&00) can no longer be processed. Enter /HELP-MSG in system mode
or refer to the BS2000 'System Messages' manual for further information
on the DMS error code.
Response
Submit the error documentation and an error report for system diagnosis.
SEZ0024
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0024 FILE: (&00) BLOCK NUMBER: (&01)
Meaning
Output of file and block number, if block head error was detected.
SEZ0025
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0025 FILE '(&00)' CATALOGUED UNDER MORE THAN ONE BS2000 CATALOG ID OR THE CATALOG ID IS NOT IN THE SESAM CATID LIST
Meaning
The file may only be catalogued under one catalog ID. SESAM files may not
differ in just the catalog ID. If a catid list is assigned, a file can
only be created with a catalog ID of this list.
Response
Change the file name or delete at least one of the files. Change the
catalog ID list.
SEZ0030
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0030 FILE '(&00)' OPENED
Meaning
The fact that the file was opened is logged.
SEZ0031
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0031 FILE '(&00)' CLOSED
Meaning
The fact that the file was closed is logged.
SEZ0032
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0032 FILE '(&00)' EMPTY
Meaning
(&00) is empty, so it cannot be read-accessed.
Response
This message does not require a response. Any measures necessary are
taken in response to subsequent messages.
SEZ0033
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0033 FILE '(&00)' CANNOT BE CREATED ON MEDIA SPECIFIED IN MEDIA TABLE
Meaning
Because of an error or lack of space, the file (&00) cannot be created
on any of the media defined in the media table for this file type.
DEVICE REQUEST is defined in the media table for this file type. You are
therefore requested by the console to enter a medium.
Response
Respond to the input request that follows.
SEZ0034
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0034 PLEASE ENTER NEW MEDIUM FOR FILE (&00). RESPONSE (PUBLIC [<CATID>]; PRIVATE [<CATID>],<DEVICE-TYPE>,<VSN>[,<VSN>,.. ]; IGNORE)
Meaning
A device must be entered on which the file (&00) is to be created.
PUBLIC [catid]: The file is to be created on pubset [with specified
catid].
PRIVATE [catid],device-type,<vsn>[,<vsn>,... ]: The file is to be created
on private disks [with the specified catid] with the specified VSNs
and device-type. At most six vsns could be specified.
IGNORE: The file will not be created (file type CATREC, PBI and DDLTA)
or an attempt is made to create the file with the next sequence number
on the same medium (file type DALOG and CATLOG).
Response
Respond to the request. The DBH is halted until a response is entered.
If IGNORE is entered for the file type CATREC, PBI or DDLTA, the statement
which caused the request is rejected. If IGNORE is entered for the file
type DALOG or CATLOG, an attempt is made to create the file with the next
sequence number on the existing medium. This can be successful if space
has been created on the medium. After three unsuccessful attempts, the
database is locked for further changes.
SEZ0035
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0035 INVALID ENTRY. REPLY (PUBLIC [<CATID>]; PRIVATE [<CATID>],<DEVICE-TYPE>, <VSN>[,<VSN>,.. ]; IGNORE)
Meaning
The reply was invalid.
Possible causes:
- Syntax error
- The specified PVS is inaccessible either generally or for this user ID.
- The specified volume type is not known in the system.
Response
Enter correct reply.
SEZ0036
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0036 FASTPAM ERROR '(&01)' WHILE PROCESSING THE FILE (&00). ENTER: /HELP-MSG DFP(&01) IN SYSTEM MODE
Meaning
An error (&01) occurred while processing the file (&00). Enter /HELP-MSG
in system mode or refer to the BS2000 'System Messages' manual for
further information on the FASTPAM error code.
Response
If the current function has been aborted with a dump, submit the error
documentation and an error report for diagnosis.
SEZ0037
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0037 FASTPAM RETURNS '(&00)' WITH SUBCODE '(&01)'. IN SYSTEM MODE: /HELP-MSG DFP(&00)
Meaning
FASTPAM returns (&00) for ENABLE or DISABLE. Enter /HELP-MSG in system
mode or refer to the BS2000 manual 'System Messages' for further
information on the FASTPAM error code. If the error occurs on ENABLE,
SESAM switches to UPAM.
Response
Correct the cause of the error. If a system error appears to the cause,
submit the error documentation and error message to the system diagnosis
department.
SEZ0038
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEZ0038 SESAM CONTINUES WITH UPAM
Meaning
FASTPAM has returned an error. SESAM continues with UPAM.
Response
Correct the error shown in the previous message.
SEZ0039
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEZ0039 SESAM CONTINUES WITH FASTPAM IN TEST MODE
Meaning
A FASTPAM authorization is missing; see previous message.
SESAM operates with FASTPAM in test mode.
Response
Correct the error shown in the previous message.
SEZ0040
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEZ0040 THE OPTIONS REQUIRED (&00) FPAMACCS. TOO MUCH FOR FASTPAM WITHOUT RESIDENT AREAS
Meaning
The FASTPAM authorization is missing.
Not even the use of FASTPAM without resident areas is possible because
the number of FPAMACCs required for the options is higher than 500.
Response
Change the options and apply for FASTPAM authorization or use UPAM.
SEZ0041
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEZ0041 THE OPTIONS REQUIRED (&00) FPAMACCS. TOO MUCH FOR FASTPAM
Meaning
The number of FPAMACCs required for the options is higher than 5000.
Response
Change the options or use UPAM.
SEZ0042
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEZ0042 SESAM USES THE FASTPAM ACCESS METHOD WITH RESIDENT AREAS
Meaning
SESAM/SQL uses the FASTPAM access mode for all files except for the
database files that are stored on shared or protected private disks
(SPD or PPD).
The minimum requirement for the number of resident pages (specified in
the START command for the DBH start via parameter RESIDENT-PAGES) could
be satisfied.
SEZ0101
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0101 ERROR DURING INITIALIZATION OF THE MODULE TABLE
Meaning
Internal program error.
Response
Submit error message with dump to system diagnosis department.
SEZ0102
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0102 ERROR WHILE ENTERING MODULE '(&00)' IN THE MODULE TABLE
Meaning
Internal program error.
Response
Submit error message with dump to system diagnosis department.
SEZ0103
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0103 ERROR WHILE RELOADING MODULE '(&00)', BIND RETURNCODE: '(&01)'
Meaning
Possible causes of error:
a) Unable to find module (&00) in the SESAM module library.
b) Module (&00) has the wrong correction or version status.
SEZ0104
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0104 SYMBOL '(&00)' NOT FOUND, BIND RETURNCODE: '(&01)'
Meaning
Internal program error.
Response
Submit error message with dump to system diagnosis department.
SEZ0105
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0105 WRONG ILCS VERSION
Meaning
Possible causes of error:
Wrong CRTE library assigned.
Response
Check the CRTE library assignment. If this error message persists,
submit it with dump to the system diagnosis department.
SEZ0106
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0106 OUT OF MEMORY FOR INITIALIZATION OF THE ILCS
Meaning
Possible causes of error:
The public space limit of the user ID is too small.
Response
Check the user attributes or public space limit and increase if necessary.
SEZ0107
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0107 INTERNAL ERROR DURING INITIALIZATION OF THE ILCS
Meaning
Internal program error.
Response
Submit error message with dump to system diagnosis department.
SEZ0108
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0108 UNEXPECTED RETURN VALUE DURING INTIALIZATION OF THE ILCS
Meaning
Internal program error.
Response
Submit error message with dump to system diagnosis department.
SEZ0109
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0109 THE USED SESAM MODULE LIBRARY DOES NOT SUPPORT THIS HARDWARE.
Meaning
The release item SYSLNK.SESAM-SQL.xxx does not support SX hardware.
Response
Assign SESAM module library SPULNK.SESAM-SQL.xxx and start the
program again.
SEZ0110
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ0110 PROGRAM LIBRARY CANNOT BE IDENTIFIED.
Meaning
The program library the program is started from cannot be identified.
SEZ1001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1001 READ/WRITE ERROR OCCURRED FOR FILE '(&00)'. DMS ERROR: '(&01)'. ISSUE /HELP-MSG DMS(&01) IN SYSTEM MODE
Meaning
Read or write error (possibly hardware error). Enter /HELP-MSG in system
mode or refer to the BS2000 'System Messages' manual for further
information on the DMS error code.
Response
Correct the DMS error and repeat the statement.
SEZ1002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1002 DMS ERROR '(&01)' ON OPENING THE FILE '(&00)'. ISSUE /HELP-MSG DMS(&01) IN SYSTEM MODE
Meaning
Error on opening the file. Enter /HELP-MSG in system mode or refer to the
BS2000 'System Messages' manual for further information on the DMS error
code.
Response
Correct the DMS error and repeat the statement.
SEZ1003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1003 DMS ERROR '(&01)' WHEN CLOSING FILE '(&00)' OR DURING TAPE SWAPPING. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or refer to the BS2000 'System Messages' manual.
Response
The program is terminated, restart session.
SEZ1004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1004 FILE ACCESS WITHOUT PREVIOUS OPEN
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1005 INTERNAL PROGRAM ERROR. MAXIMUM NUMBER OF FILES EXCEEDED
Response
In the case of program termination without TERMD, create a dump, send
error message.
SEZ1006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1006 READ OPERATION ON OUTPUT FILE '(&00)'
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1007
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1007 WRITE OPERATION ON INPUT FILE '(&00)'
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1008
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1008 SECOND OPEN ON FILE '(&00)' WITHOUT PREVIOUS CLOSE
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1009
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1009 WAIT OPERATION ON FILE '(&00)' WITHOUT A PREVIOUS READ OPERATION
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1010 WAIT OPERATION ON FILE '(&00)' WITHOUT A PREVIOUS WRITE OPERATION
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1011
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1011 INPUT ERROR: INVALID OP-CODE
Meaning
An invalid operation code was specified in the parameter.
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ1012
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1012 DB NAME IN THE ASSIGNED FILE DOES NOT MATCH THE ONE IN THE REQUESTED FILE
SEZ1013
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1013 FILE '(&00)' CATALOGUED ON SEVERAL PVS'S
Response
Ensure that the file name is unique across all public volume sets.
SEZ1014
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1014 FILE '(&00)' NOT AVAILABLE. DMS ERROR '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or refer to the BS2000 'System Messages' manual.
Response
Catalog file, repeat session.
SEZ1015
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1015 GENERAL INPUT ERROR: ADDRESS OF I/O AREA INVALID
Response
In the case of a program termination without TERMD, create and send dump.
SEZ1016
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1016 INPUT ERROR: BLOCK LENGTH/NUMBER OF BLOCKS INVALID
Response
In the case of a program termination without TERMD, create and send dump.
SEZ1017
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1017 FILE '(&00)' HAS NOT BEEN CREATED IN THE CURRENT VERSION OR ILLEGAL
Meaning
The program is aborted.
Response
Allocate correct file from current version, repeat session.
SEZ1018
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1018 GENERAL INPUT ERROR
Meaning
Invalid input parameter.
Response
Program is terminated, repeat session.
SEZ1019
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1019 SESAM FILE NAME '(&00)', LINK NAME '(&01)'
Meaning
An open was executed on the SESAM file.
SEZ1020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1020 USER FILE NAME '(&00)'
Meaning
An open was executed on the user file name.
SEZ1021
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1021 A READ/WRITE ERROR OCCURRED IN FILE '(&00)'
SEZ1022
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1022 DMS ERROR CODE '(&01)' FOR FILE '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
A DMS error occurred in system macros. For more detailed information about
the DMS error code enter /HELP-MSG in system mode or refer to the BS2000
manual 'System Messages'.
Response
Program is terminated. Repeat session.
SEZ1023
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1023 INVALID FILE ALLOCATION. LINK NAME: (&00)
Meaning
Program is terminated.
Response
Allocate correct file. Repeat session.
SEZ1024
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1024 REQUESTED: SESAM FILE NAME: (&00)
SEZ1025
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1025 ............USER FILE NAME: (&00)
SEZ1026
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1026 ALLOCATED: SESAM FILE NAME: (&00)
SEZ1027
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1027 .............USER FILE NAME: (&00)
SEZ1028
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1028 INVALID DEVICE TYPE ASSIGNED FOR DA-LOG FILE
Meaning
'Magnetic tape cartridge' was assigned as device type for the DA-LOG file.
Response
Assign disk or tape for DA-LOG file.
SEZ1029
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1029 DMS ERROR '(&01)' OCCURRED BY 'RELEASE'. LINKNAME: '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
RELEASE invalid executed For more detailed information about the DMS
error code enter /HELP-MSG in system mode or refer to the BS2000
'System Messages' manual.
SEZ1030
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1030 DMS ERROR '0927' WHEN WRITING FILE '(&00)' (PAM-EVENTING-ERROR). IN SYSTEM MODE /HELP-MSG DMS0927
Meaning
An error occurred in PAM eventing when writing the DA-LOG file. The reason
for the error has been entered in the event control block. For more
detailed information about the DMS error code enter /HELP-MSG in system
mode or refer to the BS2000 'System Messages' manual.
SEZ1031
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1031 CONTINUATIONFILE '(&00)' WILL BE OPENED
Meaning
In a configurationfile the continuationfile (&00) was defined.
Therefore the continuationfile will be opened.
SEZ1032
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1032 FILE '(&00)' NOT FOUND
Meaning
The continuationfile (&00) should be opened. The file could not be found.
Response
Create the file by BS2000 file command.
SEZ1033
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1033 DUPLICATE OF CATID '(&00)' IS IGNORED.
Meaning
A catid is defined repeatedly in the catid file. Duplicates are
ignored.
Response
Correct the catid file before you start the program again.
If the current program is a SESAM DBH, you can reassign another or the
corrected catid file already in the current DBH session using the
administration statement MODIFY-CATID-LIST.
SEZ1034
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1034 DEFAULT CATID '(&00)' OF THE CURRENT USER ID IS MISSING IN CATID FILE.
Meaning
The default catid of the current user ID must be contained in the catid
list. Since it was not defined in the catid file, it was implicitly
transferred to the internal catid list.
Response
Correct the catid file before you start the program again.
SEZ1035
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1035 CATID '(&00)' WAS NOT TRANSFERRED TO CATID LIST.
Meaning
A catid must consist of uppercase letters or digits only. Wildcard
symbols are not permitted.
Response
Correct the catid file before you start the program again.
If the current program is a SESAM DBH, you can reassign another or the
corrected catid file already in the current DBH session using the
administration statement MODIFY-CATID-LIST.
SEZ1036
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1036 FILE (&00) ASSIGNED WITH LINK NAME SESAMCID WAS NOT FOUND.
Meaning
The specified file was not found, and hence no catid list is operative.
Response
Check the file name.
If the current program is a SESAM DBH, you can reassign another catid
file already in the current DBH session using the administration
statement MODIFY-CATID-LIST.
SEZ1037
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1037 FILE (&00) ASSIGNED WITH LINK NAME SESAMCID IS EMPTY.
Meaning
The specified file is empty, and hence no catid list is operative.
Response
Check the file and the file name respectively.
If the current program is a SESAM DBH, you can reassign another or the
corrected catid file already in the current DBH session using the
administration statement MODIFY-CATID-LIST.
SEZ1038
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ1038 FILE (&00) NOT CATALOGUED UNDER ANY CATID. AT LEAST ONE OF THE PUBSETS ADDRESSED IN THE CATID LIST IS NOT ACCESSIBLE. INVOLVED CATID: (&01)
Meaning
The file is not catalogued under any catid of the catid list. In addition,
at least one of the DMS errors DMS0501, DMS0512 or DMS051B has occurred.
So the reason may be the fact that at least one of the pubsets addressed
in the catid list is temporarily not accessible or that the catid is
simply misspelt.
This is only a matter of warning, since the nonexistence of a file
does not essentially indicate an error.
Response
- If the existence of the file is required and it belongs to a pubset
that is not accessible at present, ask the system administrator to
make the pubset available.
- If the existence of the file is required and the appropriate catid
is missing in the catid file or is misspelt, correct the catid file
before you start the program again.
If the current program is a SESAM DBH, you can reassign another or the
corrected catid file already in the current DBH session using the
administration statement MODIFY-CATID-LIST.
SEZ2002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2002 SYNTACTICAL ERROR IN FILE NAME '(&00)'
Meaning
The specified file name is invalid (CATALOG ID or USER ID too long).
Response
Correct the file name.
SEZ2003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2003 SPACE ALLOCATION FOR WORK FILE TOO SMALL; MIN. SPACE = ((&00),(&01))
Meaning
The work file allocated by means of LINKNAME is too small.
Response
Reenter /CREATE-FILE command with the necessary SPACE option.
SEZ2101
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2101 ERROR DURING OPEN OF THE MAIL PARAMETER FILE
Meaning
An error occured during the open of the mail parameter file.
Response
Check the file
SEZ2102
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2102 ERROR DURING READING OF THE MAIL PARAMETER FILE
Meaning
An error occurred while reading the mail parameter file.
Response
Check the file
SEZ2103
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2103 ERROR DURING OPEN OF THE TEMPORARY MAIL FILE
Meaning
An error occurred during the open of the temporary file used for the
function COLLECT
of the mail functions of SESAM.
Response
Check the file.
Handle a possible shortage of disc space.
SEZ2104
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2104 ERROR DURING CLOSE OF THE TEMPORARY MAIL FILE
Meaning
An error occurred during the close of the temporary file used for the
function COLLECT
of the mail functions of SESAM.
Therefore the file cannot be sent by mail.
Response
Check the file.
SEZ2105
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2105 ERROR DURING WRITING THE TEMPORARY MAIL FILE
Meaning
An error ocurred during writing the temporary mail file used for the
function COLLECT.
Response
Handle a possible shortage of disc space.
SEZ2110
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2110 MAIL SERVICE NOT AVAILABLE
Meaning
nail service is not running
Response
Check whether the mail service is installed und active.
SEZ2111
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2111 ERROR DURING SENDING A MAIL.
Meaning
An error was signalled during sending a mail.
Response
The mail services stated an error.
It could be an error in the receipient address.
SEZ2120
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2120 NO MAIL RECIPIENT PROVIDED.
Meaning
No mail recipient found in the mail parameter file.
Response
Check the file.
SEZ2121
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ2121 ONLY THE FIRST 100 MESSAGE NUMBERS USED
Meaning
More than 100 mail numbers found in the mail parameter file.
Only the first 100 will be used.
Response
Check the file.
SEZ3001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3001 FILE ACCESS WITHOUT PREVIOUS OPEN
Response
In the case of program termination without TERMD, create dump. Send error
message.
SEZ3002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3002 INPUT ERROR: INVALID OP CODE
Meaning
An invalid operation code was specified in the operand.
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ3003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3003 SECOND OPEN ISSUED FOR FILE '(&00)' WITHOUT PRIOR CLOSE
Response
In case of a program termination without TERMD, take dump.
SEZ3004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3004 INTERNAL PROGRAM ERROR. MAXIMUM NUMBER OF FILES EXCEEDED
Response
In the case of program termination without TERMD, create a dump, send
error message.
SEZ3006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3006 RECORD- OR BLOCKSIZE INVALID IN PARAMETER AREA
Response
Take dump.
SEZ3007
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3007 GENERAL INPUT ERROR
Response
In the case of a program termination without TERMD, create a dump. Send
error message.
SEZ3008
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3008 OPEN PROCESSED FOR SESAM FILE '(&00)' WITH LINKNAME '(&01)'
SEZ3009
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3009 OPEN PROCESSED FOR USER FILE '(&00)'
SEZ3010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3010 DMS ERROR '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or refer to the BS2000 'System Messages' manual.
SEZ3011
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3011 FILE NAME '(&00)', LINK NAME '(&01)'
Meaning
DMS error occurred regarding file.
Response
Program is terminated, repeat program run.
SEZ3012
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3012 FILE ATTRIBUTES OF FILE '(&00)' DEFINED INCOMPLETELY
Meaning
The file has not been defined completely in the /FILE command.
Response
Correct the /FILE command.
SEZ3013
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ3013 FILE '(&00)' CATALOGUED ON SEVERAL PVS'S
Response
Ensure that the file name is unique across all public volume sets.
SEZ4000
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4000 'PCB' ALREADY MODIFIED WITH 'CONTXT'
Meaning
With CONTXT the register and/or the program counter have already been
modified in the actual interrupt state.
SEZ4001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4001 PROGRAM RUNTIME EXCEEDED AT INSTRUCTION COUNTER '(&00)'
Meaning
(&00): instruction counter.
Response
Increase the CPU time available for the program run (Increase CPU-LIMIT
parameter in the ENTER-JOB or START-PROGRAM command or use a job class
with a higher time limit).
SEZ4002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4002 ERROR. INTERRUPT WEIGHT '(&00)' AT INSTRUCTION COUNTER '(&01)'
Response
Forward dump for SESAM diagnosis.
SEZ4003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4003 PROGRAM ERROR. INTERRUPT WEIGHT '(&00)' AT INSTRUCTION COUNTER '(&01)'
Response
Forward dump for SESAM diagnosis.
SEZ4004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4004 ADMINISTRATION STATEMENT '(&00)' AT INSTRUCTION COUNTER '(&01)'
SEZ4005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4005 ADMINISTRATION STATEMENT REJECTED
Meaning
The administration statement cannot be processed at the moment.
Response
Try later.
SEZ4010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4010 ADMINISTRATION STATEMENT: (&00)
SEZ4600
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEZ4600 PROGRAM '(&00)', VERSION (&01) STARTED; TSN: (&02)
SEZ4601
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : YES
SEZ4601 PROGRAM '(&00)' TERMINATED NORMALLY
SEZ4602
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : YES
SEZ4602 PROGRAM '(&00)' TERMINATED WITH ERRORS
Response
Analyze further error messages and reload program if necessary.
SEZ4603
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : YES
SEZ4603 PROGRAM '(&00)' TERMINATED WITH WARNING
Meaning
Program (&00) executed without error. Inconsistencies were, however,
detected during processing.
Response
Consult the SYSLST log.
SEZ4611
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4611 THE INPUT RECORD WAS TRUNCATED. READ IN AGAIN? RESPONSE (Y=YES; N=NO)
Meaning
A previous input was longer than the input buffer provided. The part of
the input which exceeded the end of the input buffer was therefore
truncated.
Response
- Respond to the message with "Y" and then repeat input in shortened form
or
- Respond to the message with "N". This causes the truncated part of the
record to be ignored. The part of the record which was read in will be
processed by the program.
SEZ4651
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4651 DIFFERENT SESAM VERSIONS; VERSION OF DYNAMICALLY LOADING LLM: (&00); DYNAMICALLY LOADED LLM (NAME/VERSION): (&01) / (&02)
Meaning
The dynamically loaded LLM has a different version from the dynamically
loading LLM. The program run is aborted.
Response
Assign the correct SESAM module library and restart the program.
SEZ4652
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4652 MODULE (&00) OF VERSION (&01) COULD NOT BE LOADED.
Meaning
The module (&00) of version (&01) is not in the
SESAM module library.
The program run is aborted.
Response
Assign the correct SESAM module library and restart the program.
SEZ4656
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4656 MODULE CONTAINING SESAM MODULE TABLE NOT FOUND IN ANY SEARCHED LIBRARY. LOADING ABORTED
Response
Inform diagnostics department.
SEZ4659
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4659 VERSION VALIDITY CHECK: THE DYNAMICALLY LOADED MODULE (&00) IS NOT A SESAM MODULE
SEZ4700
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4700 SEBSORT CONTROL STATEMENTS MISSING
Response
Repeat SEBSORT run using complete set of control characters.
SEZ4701
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4701 INVALID SEBSORT CONTROL STATEMENT
Response
Correct statement and reload SEBSORT.
SEZ4702
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4702 FILE NO ZD-UNS FILE OR DATABASE NAME >17 CHARACTERS
Response
Repeat SEBSORT run with ZD-UNS file or correct the database name.
SEZ4703
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4703 RECORD OR PRIMARY KEY VALUE LENGTH IS MISSING OR NOT A THREE DIGIT NUMBER
Meaning
The length entry is mandatory or the length is > 3 digits.
Response
Repeat session with length entry.
SEZ4704
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4704 SORT-ERROR. REPEAT SESSION
SEZ4705
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4705 SEBSORT: INPUT AND OUTPUT
Meaning
Header line.
SEZ4706
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ4706 THE FILE TO BE SORTED IS NOT A ZD-UNS FILE
Response
Repeat SEBSORT run by using correct file.
SEZ5000
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5000 MEDIA RECORD USED '(&00)'
Meaning
The specified media catalog will be used during the current SESAM DBH
session.
SEZ5001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5001 FILE '(&00)' CREATED ON MEDIA RECORD NO. '(&01)'
Meaning
The file has been created in accordance with the specifications made in
the media record.
SEZ5005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5005 LAST MEDIA RECORD OF MEDIA CATALOG '(&00)' FOR FILE TYPE '(&01)' REACHED
Meaning
When creating the current file of file type (&01), the last media record
of the media catalog is used. If a DMS error occurs and no backup device
has been requested as part of termination processing, the SESAM run will
be terminated with 'consistency check AA 80/06'.
Response
Delete files.
SEZ5014
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5014 DEVICE TYPE UNKOWN
Meaning
Defined device type not specified in the device table.
Response
Repeat input with correct device type.
SEZ5020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5020 DUE TO DMS ERROR '(&01)' FILE '(&00)' IS CREATED ON THE PVS WITH STANDARD CATALOG ID. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
No files can be set up on the PVS refereed to in the last record of the
media catalog ('PVS cat-id'). The catalog ID cannot be accessed under the
current user ID due to DMS error (&01). The file (&00) has therefore been
created on the PVS with the standard catalog ID.
Response
Access file via standard PVS. Modify media catalog record, or inform the
system administrator if required.
SEZ5021
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5021 CREATED JV '(&00)' CONTAINS: '(&01)'
SEZ5100
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5100 ERROR '(&00)' DURING JV MACRO CALL FOR JV '(&01)'. IN SYSTEM MODE: /HELP-MSG JVS(&00)
Meaning
While processing the Job-Variable (&01) JVS returned the unexpected
error code (&00).
Response
For more detailed information about the JVS error code enter /HELP-MSG
in system mode or refer to the BS2000 'System Messages' manual.
SEZ5101
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5101 ERROR DURING LINKING THE TEXT-MODULE FOR PROCESSING THE JOB-VARIABLES
Meaning
The text-module SEZTXT for processing the JVs could not be linked or
the extern references to it were not resolved.
Response
Make sure that the text-module SEZTXT is in the SESAM-library or
check the /START-PROGRAM command.
SEZ5102
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5102 JOB-VARIABLE NOT IN THE TEXT-MODULE
Meaning
The JV to be processed is not in the text-module SEZTXT for processing
the JVs.
Response
Correct the text-module SEZTXT.
SEZ5103
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5103 ERROR IN TEXT-MODULE FOR PROCESSING THE JOB-VARIABLES
Meaning
The text-module SEZTXT for processing the JVs has the wrong format.
Response
Correct the text-module SEZTXT.
SEZ5104
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5104 ERROR ON PROCESSING THE INSERTS IN THE JOB-VARIABLE
Meaning
The inserts in the contents of the Job-Variable are supplied by the
program different as they are described in the text-module SEZTXT.
Response
Correct the text-module SEZTXT.
SEZ5105
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ5105 ERROR ON PROCESSING THE SUFFIX OF THE JV-NAME
Meaning
The suffix of the JV-Name supplied by the program
is different from the one described in the text module SEZTXT.
Response
Correct the text module SEZTXT.
SEZ8001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEZ8001 DUMP WAS CREATED
Meaning
A dump of this task was created
Response
-