Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SEMREVI COMP=SEMMF,VERS=91A,DATE=200212
SEM1001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1001 INCORRECT KEY PRESSED FOR DATA TRANSFER
Response
Press the DUE key to transfer data from the form. Press the K2 key to
interrupt the monitor.
SEM1002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1002 INVALID CONFIGURATION NAME
Response
Enter a valid configuration name. In interactive mode, letters, digits and
blank may be entered. In batch mode, letters, digits and '*BLANK' are
permitted.
SEM1003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1003 INVALID INPUT FOR FILE
Response
Enter 'x' or 'X'.
SEM1004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1004 INVALID INPUT FOR SCREEN
Response
Enter 'x' or 'X' or 'r' or 'R' or 'c' or 'C'.
SEM1005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1005 INVALID INPUT FOR SYSLST
Response
Enter 'x' or 'X'.
SEM1006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1006 INVALID INPUT FOR SELECTION OF OUTPUT FORM
Response
Enter 'x' or 'X'.
SEM1007
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1007 NO DESTINATION SPECIFIED
Response
At least one of the possible destinations ('SCREEN', 'SYSLST' or 'FILE')
must be specified.
SEM1008
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1008 CONTINUATION OF COUNTER RESET IMPOSSIBLE WITHOUT RESET!
Meaning
To continue the output (input 'C') relative to a reset there has to be
a reset (input 'R') before.
Response
First type in 'R' (RESET) for Output Medium 'SCREEN' to initialize a
Counter Reset. After that you can keep the Reset by typing 'C'
(Continuation) with an appropriate new selection of output.
SEM1009
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1009 A CONTINUATION CAN NOT EXTEND SELECTION OF THE RESET!
Meaning
A continuation of a counter reset is possible only if there is a backup
of the counters at reset time! Therefore the new configuration selection
needs to have been part of the selection at reset time.
Response
Have a new reset with the new selection
SEM1011
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1011 INVALID 'SESAM-DBH' 'NAM' SPECIFICATION
Response
Enter a valid 'SESAM-DBH' 'NAM' identifier. In interactive mode, letters,
digits and blank may be entered. In batch mode, letters, digits, '*BLANK'
and '*NONE' are permitted.
SEM1012
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1012 'SESAM-DBH' SPECIFIED, BUT NO 'SESAM-DBH' OUTPUT SCREEN SELECTED.
Meaning
This message only appears if 'SCREEN"" and/or 'SYSLST' was selected for
output.
Response
At least one of the 'SESAM-DBH' output screens must be selected.
SEM1013
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1013 OUTPUT TO FILE IN PROGRESS
Meaning
This message is only displayed if output to 'SCREEN' has not been
requested.
SEM1014
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1014 OUTPUT TO SYSLST AND FILE IN PROGRESS
Meaning
This message is only displayed if output to 'SCREEN' has not been
requested.
SEM1015
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1015 OUTPUT TO SYSLST IN PROGRESS
Meaning
This message is only displayed if output to 'SCREEN' has not been
requested.
SEM1016
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1016 NO OUTPUT TO SYSLST POSSIBLE
SEM1017
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1017 NO OUTPUT TO FILE POSSIBLE
SEM1018
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1018 ERROR IN THE 'SET-MONITOR-OPTIONS' STATEMENT
Meaning
This message is only output in batch mode.
SEM1019
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1019 'INFORM-PROGRAM' REJECTED. ONLY MESSAGE TEXT 'STOP' OR 'SEL' PERMITTED
Meaning
The given command INFORM-PROGRAM MSG='message-text' or INTR 'message-text'
or SEND-MSG TO=PROGRAM, MSG='message-text' has been rejected. Only the
message text 'SEL' or 'STOP' is allowed.
Response
Hit the K2 key again and type a correct command INFORM-PROGRAM
MSG='message-text'.
SEM1020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1020 SDF SYNTAX FILE DOES NOT EXIST.
Meaning
'SESMON' cannot be started, since the SDF syntax file is not available.
Response
Ask the system administrator to add the SDF syntax file
SEM1021
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1021 ALL SELECTED TASKS HAVE BEEN TERMINATED
Meaning
The monitor has finished its evaluation. In interactive mode, an
additional evaluation task may be entered in the SELECTION form. In batch
mode, the monitor is terminated.
SEM1022
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1022 NO SESDCN AND NONE OF THE SPECIFIED SESAM DBHS EXIST IN THE CONFIGURATION
Meaning
This message is only output in batch mode.
SEM1023
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1023 INPUT OF REFRESH TIME WITHOUT SELECTION OF CORRESPONDING DESTINATION
SEM1024
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1024 NO OUTPUT FORM SPECIFIED.
Meaning
This message is only displayed if 'SCREEN' or 'SYSLST' was selected as the
destination.
Response
At least one of the output forms must be selected.
SEM1025
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1025 SESAM DBH OUTPUT FORM SPECIFIED, BUT NO SESAM DBH
SEM1026
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1026 SPECIFIED SESAM DBH DOES NOT EXIST IN THE CONFIGURATION
Meaning
This message is only output in interactive mode.
SEM1027
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1027 NO SESDCN IN CONFIGURATION
Meaning
This message is only output in interactive mode.
SEM1028
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1028 ALL SESAM DBHS SPECIFIED IN THE CONFIGURATION HAVE BEEN TERMINATED.
SEM1029
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1029 OUTPUT TO FILE STILL IN PROGRESS
SEM1030
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1030 SPECIFIED SESAM DBH AND SESAM MONITOR HAVE DIFFERENT CORRECTION LEVELS.
Meaning
This message is only output in interactive mode.
DBH and monitor were loaded from diffenrent libraries that are not
compatible.
Therefor it is impossible to present data from this DBH.
Response
Use the same library for DBH and monitor.
SEM1032
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1032 SCREEN REFRESHTIME SPECIFIED AS '0', BUT MORE THAN ONE SCREEN SELECTED.
Response
Specify different SCREEN REFRESHTIME or select only one screen.
SEM1033
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1033 SESAM DBH '(&00)' NOT IN SPECIFIED CONFIGURATION
Meaning
This SESAM DBH is removed from the evaluation. All other tasks are
monitored normally.
Response
This message is displayed only in batch mode.
SEM1034
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1034 SESAM DBH '(&00)' HAS A DIFFERENT CORRECTION LEVEL AS THE SESAM MONITOR.
Meaning
This SESAM DBH is removed from the evaluation. All other tasks are
monitored normally.
Response
This message is displayed only in batch mode.
SEM1036
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1036 ALL TASKS EXAMINED FOR THE SELECTED FORMS WERE TERMINATED
Meaning
In interactive mode this message is displayed if "SCREEN" or SYSLST was
selected as the destination.
SEM1037
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1037 INVALID MAXIMUM NUMBER OF TRANSACTIONS TO SYSLST
Response
Enter a valid number of transactions. The values '0' or '10'
through '999' are permitted.
SEM1038
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1038 MAX. NUMBER OF TRANSACTIONS ENTERED WITHOUT SELECTING TRANSACTIONS FORM
Response
Select TRANSACTIONS form or enter "0" for maximum number
of transactions.
SEM1039
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1039 MEMORY BOTTLENECK ON CREATING TABLE FOR THE TRANSACTIONS
Response
Increase user address space in the join entry for the user ID
or
in interactive mode, reduce the maximum number of transactions to be
output to SYSLST; in batch mode restart the monitor with a lower number
of transactions to be output to SYSLST.
SEM1050
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1050 THE USED BS2000 VERSION DOES NOT SUPPORT THE TRANSFER OF DB DATA TO OPENSM2.
Meaning
The used BS2000 version does not support the transfer of db data
to openSM2. The BS2000 Version must be V8 or higher.
SEM1051
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1051 SESAM-SQL MEASUREMENT PROGRAM IN SM2 NOT YET STARTED.
Meaning
The SESAM-SQL measurement program in SM2 is not yet started.
Response
Start measurement program with SM2 administration command
START-MEASUREMENT-PROGRAM=*SESAM-SQL.
SEM1052
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1052 SM2 GATHERER TASK DOWN.
Meaning
The SM2 gatherer task is not yet started or abnormal terminated.
Response
After evaluating the reason and correcting restart SM2 (START-SM2)
and activate measurement program for SESAM/SQL.
SEM1053
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1053 SUBSYSTEM SM2 NOT ACTIVE.
Meaning
The subsystem is not started.
Response
Start the subsystem SM2.
SEM1054
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1054 OUTPUT SM2, BUT NO SESAM DBH SPECIFIED.
Meaning
By specification of SM2 for OUTPUT you must specify at least one dbh
in the operand DBH-NAMES.
Response
Correct the options and start SESMON again.
SEM1055
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEM1055 INTERNAL ERROR IN SM2.
Meaning
In SM2 a system error occurred. No dump was generated.