Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SEAREVI COMP=SEAMF,VERS=91A,DATE=200212
SEA4002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4002 KEYWORD IS MISSING. PROGRAM RUN TERMINATED
Meaning
The function or the keyword NAME or SPACE was not specified.
Response
Enter function or NAME or SPACE in 1P0 statement.
SEA4004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4004 SYNTAX ERROR IN 1P0 STATEMENT. PROGRAM RUN TERMINATED
Response
Correct concerned statement and repeat program run.
SEA4005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4005 INVALID LIST FUNCTION. PROGRAM RUN ABORTED
Response
Correct 1P0 statement, repeat program run.
SEA4010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4010 STATEMENT IGNORED
Meaning
Erroneous statement. The program run is continued.
Response
Correct the statement concerned and repeat the program run.
SEA4011
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4011 INVALID LIMITATION
Meaning
In global and single limitations, inconsistent specifications were made.
Response
Check and correct the limitation statement, repeat program run.
SEA4012
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4012 ERROR IN SEQUENCE
Meaning
An invalid sequence has been detected in input statements.
(1P1, 1P2, 1P3, 1P4 ...).
Response
Correct configuration of statements and repeat program run.
SEA4013
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4013 INVALID SAN
Meaning
The symbolic attribute names must begin with an alphabetic character.
The program run is continued.
Response
Correct erroneous symbolic attribute names and repeat program run.
SEA4014
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4014 SYNTAX ERROR IN 1P1-1P5 STATEMENT. PROGRAM RUN ABORTED
Response
Correct the statement concerned and repeat the program run.
SEA4015
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4015 TOO MANY DELETE PASSWORDS
Meaning
Max. 120 statements are allowed. The program is continued.
Response
The SEPA run must be split up into several runs. Repeat program run.
SEA4016
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4016 TOO MANY CHANGE PASSWORDS
Meaning
See SEA4015.
Response
See SEA4015.
SEA4017
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4017 INTERNAL ERROR. PROGRAM RUN TERMINATED WITH DUMP
Response
Send error documents, repeat program run.
SEA4018
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4018 NEGATION ERROR
Meaning
Sequence specification does not contain 'N' in the fourth column. The
program run is continued, the password is ignored.
Response
Correct concerned statement and repeat program run.
SEA4019
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4019 INCONSISTENCY IN AUTHORIZATION
Meaning
An inconsistency was noticed; program run is continued.
Response
Correct error(s) in statement and repeat program run.
SEA4020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4020 SAN NOT ASCENDING
Meaning
SAN specified have to be listed in ascending order. Program run is
continued, password is ignored.
Response
Correct error(s) in statement and repeat program run.
SEA4021
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4021 1P0 STATEMENT MISSING
Meaning
Runtime control statement is missing. Program run is terminated.
Response
Provide 1P0 statement and repeat program run.
SEA4022
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4022 KEYWORD MULTIPLY DEFINED
Meaning
Function in 1P0 statement is multiply defined. Program run is terminated.
Response
Correct 1P0 statement and repeat program run.
SEA4025
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4025 PASSWORD CATALOG NOT GENERATED
Meaning
The request cannot be executed, because no password catalog is existing.
Program run is terminated.
Response
Start GEN, repeat program run.
SEA4026
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4026 PASSWORD CATALOG DESTROYED
Meaning
List of passwords is destroyed.
Response
Reconstructions are necessary, repeat program run.
SEA4027
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4027 PASSWORD ORDER NOT ASCENDING
Meaning
Password order in 1P1 statement is not ascending. Password is ignored,
program run is continued.
Response
Correct statement, repeat program run.
SEA4028
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4028 PRIMARY KEYS NOT ASCENDING
Meaning
Primary keys in 1P3/1P4 are not sorted in ascending order. Program run is
continued, password is ignored.
Response
Sort and reissue statement, repeat program run.
SEA4030
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4030 LENGTH OF PASSWORD NOT 3 CHARACTERS
Meaning
Syntactical error; program run is continued.
Response
Correct statement, repeat program run.
SEA4031
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4031 LIST FUNCTION IS NOT EXECUTED
Meaning
List operand inconsistent with request.
Response
Start new list function and restart SEPA run.
SEA4033
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4033 NO DATA EXISTING FOR UPDATE
Meaning
Although indicated in 1P1 statement, no 1P2-1P4 statements follow.
Program run is continued.
Response
Insert statements missing, repeat program run.
SEA4034
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4034 NOT ALL PASSWORDS GENERATED
Meaning
Remark on SYSDTA: password is not accepted.
SEA4035
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4035 MORE THAN 100 PASSWORDS
Meaning
The maximum number of 100 statements can be handled. Program run is
continued.
SEA4036
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4036 ERROR CONCERNING 1P1-CP DATA
SEA4037
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4037 ERROR CONCERNING 1P1-DP DATA
SEA4038
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4038 HEXADECIMAL STRING INVALID AS ENTRY. CORRECT ENTRY
SEA4039
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4039 PASSWORD '(&00)' ALREADY AVAILABLE IN PASSWORD CATALOG. RUN IS CONTINUED
Response
Possibly delete available password (KW). An overall view of all passwords
can be obtained using LIST.
SEA4040
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4040 PASSWORD '(&00)' NOT AVAILABLE IN PASSWORD CATALOG. RUN IS CONTINUED
Meaning
During deletion or modification it was detected that the password (KW)
is not available in the password catalog.
Response
Correct statement; if necessary, repeat run.
SEA4041
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4041 PASSWORD '(&00)' MULTIPLY SPECIFIED IN MODIFICATION STATEMENT. RUN IS CONTINUED
Response
Correct statement; if necessary, repeat program run.
SEA4042
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA4042 FOR PASSWORD '(&00)' CONTRADICTION IN PASSWORD ASSIGNMENT. RUN IS CONTINUED
Meaning
The password cannot be deleted and modified in the same program run.
Response
Correct statement, repeat program run.
SEA4043
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4043 PASSWORD '(&00)' NOT GENERATED DUE TO PRECEDING ERRORS
Response
Repeat statement with corrected control operands.
SEA4044
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4044 PASSWORD CATALOG EMPTY
Meaning
The password catalog is empty.
SEA4045
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4045 NO TABLE ON SPECIFIED SPACE
Meaning
There is no table on the specified space.
Response
Specify the space the table is on.
SEA4046
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4046 TABLE DOES NOT SUPPORT CALL-DML.
Meaning
Table can only be processed with SQL. SEPA can only be used with tables
which support CALL-DML.
SEA4047
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4047 TABLE IS A PARTITIONED TABLE.
Meaning
SEPA cannot be used with Partitioned Tables.
SEA4048
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4048 SCHEMA NAME NOT IN CORRECT FORMAT.
SEA4049
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4049 TABLE NAME NOT IN CORRECT FORMAT.
SEA4050
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4050 FILE NAME NOT IN CORRECT FORMAT.
SEA4051
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4051 PASSWORD NOT IN CORRECT FORMAT.
SEA4052
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4052 INTERNAL ERROR. ERRONEOUS METADATA FOR SPACE
Response
Repair the space with RECOVER.
SEA4053
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4053 SQLSTATUS (&00) OCCURRED WHEN PROCESSING FILE. (DMS ERROR: &01))
Meaning
A DMS error (&01) occurred when processing the file.
Response
Eliminate the DMS error as described in the BS2000 manual
'System Messages'.
SEA4055
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4055 SPACE IS CORRUPT.
Response
Repair the space with RECOVER
SEA4056
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4056 DMS ERROR (&00) OCCURRED WHEN PROCESSING THE SPECIFIED FILE.
Response
Eliminate the DMS error as described in the BS2000 manual
'System Messages'.
SEA4057
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4057 TABLE IS CORRUPT
Meaning
The table has been flagged as corrupt.
Response
Repair the space in which the table is located with RECOVER
SEA4058
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA4058 TOO MANY INDIVIDUAL CONSTRAINTS FOR A PASSWORD
Meaning
The internal memory area for PK0 records has overflowed.
Response
Assign individual constraints more restrictively or define several
passwords.
SEA4059
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA4059 PRIMARY KEY VALUE TOO LONG
Meaning
A primary key value was specified which is longer than permitted in the
definition.
Response
Specify a primary key value of the correct length.
SEA4060
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA4060 INVALID PASSWORD
Meaning
The specified password has a hexadecimal representation X'404040' or
X'000000' or X'FFFFFF'.
Response
Specify a valid password
SEA4061
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA4061 FILE (&00) DOES NOT EXIST.
SEA4062
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA4062 THE CATALOG SPACE MUST NOT BE PROCESSED USING SEPA.
SEA7000
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA7000 CONSISTENCY CHECK (&00) (&01) OCCURRED IN SESADM
Meaning
A system error occurred in SESADM. A user dump will be generated and the
program aborted.
Response
Submit dump to SESAM diagnostics staff.
SEA7001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA7001 SESADM TERMINATED WITHOUT ADMINISTRATION
Meaning
SESADM was terminated immediately after loading.
SEA7002
Destination: USER-TASK, CONSOLE Routing code: U Weight: 50
Warranty : NO
SEA7002 NO ADMINISTRATION YET PERFORMED FOR SPECIFIED PROGRAM
Meaning
SESADM was terminated immediately after the program to be administered
was specified.
SEA7003
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7003 INCORRECT SYNTAX IN SESADM STATEMENT OR END STATEMENT MISSING AT THE END OF A SESADM INPUT FILE
Meaning
The SESADM statement must be entered with the syntax described in SESADM
user syntax file. Every SESADM input file must be terminated with an END
statement.
Also the message will occurr if after a semantic error at
PREPARE-FOREIGN-COPY
the SDF-Statement END is read.
Response
Correct syntax of the SESADM statement or add END statement to the end of
the SESADM input file.
SEA7004
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7004 SDF IS NOT AVAILABLE.
Meaning
SDF is not loaded in the system or still has to be loaded by the
administrator.
SEA7005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7005 SDF SYNTAX FILE DOES NOT EXIST.
Response
Ask the system administrator to add the SDF syntax file
SEA7006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7006 ERROR DIALOG IS NOT POSSIBLE.
Meaning
Error dialog is not permitted in expert mode.
SEA7007
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7007 INVALID SEMANTICS IN SESAM STATEMENT
Response
Correct the semantic error.
SEA7008
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7008 ERROR (STATUS (&00)) DURING INITIALISATION OF DBCON
Meaning
Status is discriped in the Message Manual!
Response
Eliminate the reason for the error and start SESADM again.
SEA7009
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7009 SESADM IS RUNNING IN A CONFIGURATION WITHOUT SESDCN; IT IS ONLY POSSIBLE TO ADMINISTER THE STANDARD DBH OF YOUR OWN CONFIGURATION.
Meaning
An attempt was made to administer a SESAM DBH of a foreign configuration
or a further SESAM DBH of your own configuration.
Response
Start SESDCN in the configuration to which SESADM is assigned in its
configuration file, or assign SESADM to a different configuration, in
which SESDCN is already active.
SEA7010
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7010 SPECIFIED DCN NOT KNOWN IN DISTRIBUTION RULE
Meaning
There is no DCN in the distribution rule which corresponds to the DCN
identification in the START-DCN-ADMINISTRATION statement (processor name,
configuration name, DCN name).
Response
Specify a START-DCN-ADMINISTRATION statement with an identifiable DCN.
SEA7011
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7011 SPECIFIED SESAM-DBH IS UNKNOWN IN DISTRIBUTION RULE
Meaning
No DBH corresponding to the DBH identification in the
START-DBH-ADMINISTRATION statement (processor name, configuration name,
DBH name) is known to the distribution rule.
Response
Specify START-DBH-ADMINISTRATION with an identifiable DBH.
SEA7012
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7012 DCN/DBH TO BE ADMINISTERED NOT AVAILABLE.
Meaning
The DCN/DBH to be administered is included in the distribution rule, but
is not an active task, or the DBH failed.
Response
Enter new START-DCN-ADMINISTRATION or START-DBH-ADMINISTRATION statement.
SEA7013
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7013 SESADM IS RUNNING IN A CONFIGURATION WITHOUT SESDCN; SESDCN CANNOT BE ADMINISTERED.
Response
- Start SESDCN in the configuration to which SESADM is assigned in its
configuration file and then restart SESADM
- or assign SESADM to a different configuration, in which SESDCN is
already active.
SEA7014
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7014 ERROR IN DCN/DBH ADMINISTRATION
SEA7015
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7015 RESPONSE TRUNCATED
Meaning
The response area is too small. The response message was truncated.
SEA7016
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA7016 RESOURCE BOTTLENECK (STATUS (&00))
Meaning
A memory bottleneck or overflow occurred.
SEA7017
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA7017 SYSTEM ERROR (STATUS (&00))
SEA7018
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA7018 ERRONEOUS OPERAND
Meaning
This message is issued in the SDF error dialog.
SEA7019
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7019 ADMINISTRATION CALL ABORTED
SEA7020
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7020 /ADMINISTRATION CALL STOP-DBH ACCEPTED
SEA7021
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7021 REQUESTING USER ROLLED BACK BY SYSTEM
Meaning
The system has removed the requesting user.
Possible causes:
Rollback by administration or internal restart
Response
Repeat START-DBH-ADMINISTRATION statement.
SEA7022
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7022 'SESDCN' ADMINISTRATION STATEMENT REJECTED; ANOTHER 'SESDCN' ADMINISTRATION STATEMENT CURRENTLY BEING PROCESSED
Response
Repeat SESDCN ADMINISTRATION STATEMENT
SEA7023
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7023 USER-CLOSE REJECTED BECAUSE OF A PENDING END-LOCK-SEQUENCE
Response
Execute END-LOCK-SEQUENCE before closing DBH Administration Session
SEA7024
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7024 OUTPUT INTO A TEMPORARY FILE NOT POSSIBLE IN THE CURRENT RUNNING ENVIRONMENT
Meaning
SESADM is running in the batch mode, a 'SHOW-FILE' command is not possible
SEA7025
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7025 NO TEMPORARY FILE EXISTING
Meaning
A tmporary file is existing only when a 'MODIFY-OUTPUT-MODE
OUTPUT=*SHOW-FILE'
command was given before and an administration command was sent to DBH or
DCN
SEA7026
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7026 THE FILE CONTAINING THE SPACE NAMES DOES NOT EXIST
Meaning
The file given within the SESADM Statement 'PREPARE-FOREIGN-COPY' for
'SPACE-NAMES=*FROM-FILE' does not exist.
SEA7027
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7027 THE FILE CONTAINING THE SPACE NAMES IS EMPTY
Meaning
The file given within the SESADM Statement 'PREPARE-FOREIGN-COPY' for
'SPACE-NAMES=*FROM-FILE' is empty.
SEA7028
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7028 THE FILE CONTAINING THE SPACE NAMES HAS TOO MANY LINES
Meaning
The file given within the SESADM Statement 'PREPARE-FOREIGN-COPY' for
'SPACE-NAMES=*FROM-FILE' contains more than 399 lines.
Response
Shorten the number of lines to 399.
SEA7029
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7029 INCORRECT SPACE NAME IN FILE '(&00)' ON LINE (&01)
Meaning
The file given within the SESADM Statement 'PREPARE-FOREIGN-COPY' for
'SPACE-NAMES=*FROM-FILE' contains an incorrect space name on the reported
line.
Response
Correct the file containing the space names.
SEA7030
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7030 THE ACCESS TO THE FILE CONTAINING THE SPACE NAMES RETURNS THE DMS ERROR: '(&00)'
Meaning
The access to the file given within the SESADM Statement
'PREPARE-FOREIGN-COPY' for 'SPACE-NAMES=*FROM-FILE' returned a DMS Error.
Response
Correct the file containing the space names.
SEA7031
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7031 ADM: FORCED LOCK REQUEST CANNOT BE IMPLEMENTED DUE TO (&00). COMMAND REJECTED.
Meaning
A lock request for a lock sequence (Forced mode) could not be forced
because the respective object is already locked by another lock sequence,
a transaction in PTC status or a transaction of an internal system user.
Response
Try again later! Terminate the PTC transaction if necessary.
SEA7032
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7032 ADM: NO OUTPUT INTO S-VARIABLE.
Meaning
An error occurred writing the specified S-Variable.
The content of the S-Variable specified in Command or assigned
to the stream SYSINF is not changed. The administration
command works well else.
Response
Check occurred messages from SDF-P.
SEA7033
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7033 ADM: OUTPUT INTO S-VARIABLE WRONG.
Meaning
An error occurred writing the specified S-Variable.
The content of the S-Variable specified in Command or assigned
to the stream SYSINF can be partly changed. Therefore it is not
usable in further run of the procedure. The administration
command works well else.
Response
Check occurred messages from SDF-P.
SEA7034
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7034 ADM: SDF HAS DETECTED AN ERROR. ALL STATEMENTS WERE IGNORED UNTIL '//STEP' WAS RECOGNIZED.
Meaning
None.
Response
None.
SEA7035
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7035 AN ERROR DURING INITIALIZING MAIL SERVICE OCCURRED.
Meaning
During initializing the mail service for SESADM an error possibly
concerning
the mail file occurred.
The output destination is changed to the standard value, in interactive
mode all outputs are directed to SYSOUT, in batch mode to SYSLST.
Response
After correcting the error causes repeat the SESADM control statement
MODIFY-OUTPUT-MODE *OUTPUT=*MAIL. It is possible that a restart of SESADM
is necessary.
SEA7036
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7036 ERROR AT PROCESSING THE FILE SENT BY MAIL.
Meaning
During writing the output in a file an error occurred. A possible
DVS-Error
is issued in an additional message. The output destination is changed to
the
satndard value. The next MODIFY-OUTPUT-MODE statement will send the
uncomplete
file.
Response
After correcting the error causes change the output dsetiniation to mail
by using
the SESADM control statement MODIFY-OUTPUT-MODE.
SEA7037
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7037 INITIALIZING MAIL SERVICE SUCCESSFUL.
Meaning
The mail service is successfully initialized. An answer of DBH or DCN can
be sent by
mail.
Response
None.
SEA7038
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7038 MODIFICATION OF OUTPUT DESTINATION FOR FOLLOWING ADMINISTRATION STATEMENTS PERFORMED.
Meaning
The user is informed about the successful modification.
Response
None.
SEA7039
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7039 SENDING FILE CONTAINING ANSWERS OF ADMINISTRATION STATEMENTS BY MAIL CAUSED.
Meaning
SEnding the file containing the answers of administrations statements
to the address specified in the mail file is caused. If a failure occurs
a specific message will be issued in some cases.
Response
None.
SEA7040
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7040 ANY ANSWER DO NOT EXIST. A MAIL IS NOT SENT.
Meaning
At modificating the output destination *MAIL by MODIFY-OUTPUT-MODE
the file containing the answers will be sent normally.
If the file ist empty, no mail will be sent.
Response
None.
SEA7041
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7041 THE ANSWER OF THE ADMINISTRATION STATEMENT SAVED FOR SENDING BY MAIL.
Meaning
A received answer from DBH or DCN is stored in a temporary file. This
file will be sent by mail at the next MODIFY-OUTPUT-MODE. The message
do not inform about the result of the actual administration statement.
Response
None.
SEA7042
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7042 LOCK SEQUENCE ABORTED
Meaning
Probably the lock sequence is aborted by another SESADM.
Response
None.
SEA7043
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
SEA7043 VALUES FOR OPERANDS ARE SEMANTICALLY WRONG.
Meaning
Invalid semantics in SESADM statement concers at least two operands.
For example RECONFIGURE-DBH-SESSION does not allow all operands
with the value *UNCHANGED.
Response
None.
SEA7044
Destination: USER-TASK, CONSOLE Routing code: U Weight: 99
Warranty : NO
SEA7044 ERROR IN SESADM STATEMENT: ALL OPERANDS ARE ASSIGNED TO THE SESADM STANDARD VALUE.
Meaning
All operands are assigned to the SESADM standard value which is not
allowed
for the current statement.
For RECONFIGURE-DBH-SESSION at least one operand must be different
from the value *UNCHANGED.
Response
Correct the statement.