Destination: USER-TASK Routing code: Weight:
Warranty : NO
SDDCOPY Copyright (C) '(&00)' '(&01)' All Rights Reserved
SDDLOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SDDLOAD Program '(&00)',Version '(&01)' of '(&02)' loaded
SDD0001
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0001 ERROR '(&00)' FROM INTERFACE '(&01)'
Meaning
(&00) : return code from interface standard header
(&01) : system/internal interface name
SDD0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0002 System interface error. Command rejected. Contact System Support Staff
Meaning
A problem occurred with a system interface during the command processing.
Response
Refer to the previous error messages sent to SYSOUT and contact the
System Support Staff.
SDD0003
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0003 ERROR '(&00)' FROM INTERFACE '(&01)'. ERROR LOGGING SEQUENCE NUMBER IS '(&02)'
Meaning
(&00) : return code from interface standard header
(&01) : system interface name
(&02) : error logging sequence number
SDD0101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0101 CLASS '(&00)' MEMORY REQUEST ERROR
Meaning
(&00) : memory class
SDD0102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0102 CLASS '(&00)' MEMORY RELEASE ERROR
Meaning
(&00) : memory class
SDD0200
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0200 DPRINTCM SUBSYSTEM CAN NOT BE CREATED. '(&00)' SUBSYSTEM NOT PRESENT
Meaning
(&00) : subsystem name
Response
Create the corresponding subsystem to allow full DPRINT functionality.
SDD0201
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0201 DPRINTCM SUBSYSTEM CAN NOT BE CREATED.SYSDPRNT USER IDENTIFICATION NOT CATALOGUED
Response
Create SYSDPRNT user identification and retry command.
SDD0202
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0202 DPRINTCM SUBSYSTEM CAN NOT BE CREATED OR RESUMED. '(&00)' TASK CAN NOT BE CREATED
Meaning
(&00) : TSN OF THE TASK :
DPMG or DFTM or DPRP or DNET or DWDG or DWTC
SDD0203
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0203 DPRINTCM SUBSYSTEM CAN NOT BE CREATED. SPOOL PARAMETERS INTERNAL VERSION '(&00)' NOT SUPPORTED
Meaning
(&00) : spool parameters internal version
Response
Use SPSERVE to migrate the spool parameters to the supported version.
SDD0204
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0204 DPRINTCM CAN NOT BE CREATED OR RESUMED. DPRINT OBJECTS INITIALIZATION FAILED
Meaning
An internal error has been reported by the structure manager.
SDD0205
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0205 DPRINTCM CAN NOT BE CREATED OR RESUMED. BCAM INFORMATION NOT COMPLETE
Meaning
DPRINTCM subsystem is not able to work without BCAM.
Response
Start BCAM and retry.
SDD0206
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0206 DPRINTCM SUBSYSTEM CAN NOT BE CREATED. FT-BS2000 NOT ACTIVE
Meaning
FT-BS2000 must be active to allow full DPRINT functionality.
Response
Use the /START-FT command to activate FT-BS2000
SDD0207
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0207 DPRINTCM SUBSYSTEM CAN NOT BE CREATED. DMS ERROR '(&00)' DURING 'GET', 'FILE' OR 'OPEN' PROCESSING. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG
in system mode or see the BS2000 manual 'System Messages'.
Response
Try to correct the DMS error and retry startup.
SDD0208
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0208 DPRINTCM SUBSYSTEM CAN NOT BE CREATED. INVALID SPECIFICATION IN '(&00)' PARAMETER FILE
Meaning
The (&00) file does not exist
or a bad information has been introduced in the file.
Response
Correct or restore the (&00) file and retry startup
SDD0210
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0210 DPRINTCM SUBSYSTEM CAN NOT BE STOPPED OR HELD. '(&00)' TASK NOT ACCESSIBLE
Meaning
(&00) : tsn of the task
DPMG or DFTM or DPRP or DNET or DWDG or DWTC
SDD0211
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0211 DPRINT '(&00)' TASK CAN NOT BE USED ANYMORE
Meaning
(&00) : tsn of the task
The task is no more accessible. No more action can be performed.
Response
Unload DPRINTCM, load it again and retry.
SDD0212
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0212 '(&00)' TASK IS READY
Meaning
(&00) : tsn of the task
SDD0213
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0213 '(&00)' TASK NORMAL TERMINATION
Meaning
(&00) : tsn of the task
SDD0214
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0214 '(&00)' TASK ABNORMAL TERMINATION
Meaning
(&00) : tsn of the task
SDD0215
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0215 '(&00)' TASK DE-INIT BEGIN
Meaning
(&00) : tsn of the task
SDD0300
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0300 DMS ERROR '(&00)' FROM INTERFACE '(&01)' FOR FILE '(&02)'. FURTHER INFORMATION : /HELP-MSG DMS(&00)
Meaning
(&00) : DMS error code
(&01) : DMS interface name
(&02) : filename
SDD0400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0400 ERROR OCCURRED DURING INSERTION/UPDATE OF SCB IN EQUISAMQ FILE OR SLOT CREATION FOR TSN '(&00)'. PROCESSING CONTINUES ON SERVER SIDE
Meaning
An internal error occurred during the EQUISAMQ file update
or during slot creation for job tsn (&00).
The job processing can continue on the server, without notifying the
client.
SDD0500
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SDD0500 DMS/format error '(&01)' when processing file '(&00)'. Processing continues
Meaning
(&00): filename
(&01): DMS error code or 'FRMT' in case of format error
In case of DMS error, more information can be found with
/HELP-MSG DMS(&01)
Default values for accounting information are taken from
DPRINTCM parameter file (SYSSSI).
SDD0700
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0700 SPOOL '(&00)' TASK NOT ACCESSIBLE
Meaning
Due to a communication problem with a SPOOL task, the SPOOL request is
unsuccessfully terminated.
(&00) : tsn of the task
SDD0701
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD0701 STRUCTURE MANAGER ERROR
SDD0800
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0800 ILLEGAL COMBINATION OF OPERANDS. COMMAND REJECTED
Meaning
The operand syntax is correct but their combination is not allowed.
Response
Correct command and retry.
SDD0801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0801 LOGICAL VALIDATION PROBLEM DURING COMMAND PROCESSING. COMMAND REJECTED
SDD0900
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD0900 PRM ERROR '(&00)' FOR FILE '(&01)'. FURTHER INFORMATION : /HELP-MSG (&02)
Meaning
(&00) : PRM error code
(&01) : filename
(&02) : corresponding message
SDD1100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD1100 /START-DPRINT-LOGGING OR /STOP-DPRINT-LOGGING COMMAND CURRENTLY PROCESSED. COMMAND REJECTED
Meaning
The commands are processed sequentially. No command may be
issued as long as another one is still being processed
Response
Retry command later.
SDD1101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD1101 '(&00)' COMMAND ALREADY PROCESSED. COMMAND REJECTED
Meaning
(&00) : command name :
/START-DPRINT-LOGGING or /STOP-DPRINT-LOGGING
SDD1102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD1102 DPRINT LOGGING FILE '(&00)' OPENED
Meaning
(&00) : filename
SDD1103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD1103 DPRINT LOGGING FILE '(&00)' CLOSED
Meaning
(&00) : filename
SDD1104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD1104 COMMAND RESTRICTED TO SPOOL ADMINISTRATOR OR OPERATOR. COMMAND REJECTED
SDD1105
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1105 ERROR FROM MACRO '(&00)'; RETURN CODE : '(&01)'; SUBID : '(&02)'
SDD1106
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1106 SERVER TASK '(&00)'; CODE : '(&01)'; MODULE : '(&02)'; DISPLACEMENT : '(&03)'
Meaning
&00 : tsn of server task
&01 : return code of interface (whose name is given in SDD0001)
&02 : name of the module where the interface is called
&03 : displacement in the module where the interface is called.
This message has to be interpreted as a warning or error message
In case of problem, retrieve it from the conslog file for diagnose.
SDD1107
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1107 CLUSTER OR HOST '(&00)' AVAILABLE
Meaning
(&00) : cluster name or host name
The cluster or the host (&00) is now available again.
SDD1108
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1108 CLUSTER OR HOST '(&00)' NOT AVAILABLE
Meaning
(&00) : cluster name or host name
The cluster or the host (&00) is no more available.
SDD1109
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1109 $CREAT ERROR DURING DNET TASK RECOVERY. DNET TASK RECOVERY ABORTED
SDD1110
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1110 TCP APPLICATION '(&00)' WITH INTERNET ADDRESS '(&01)' AND PORT NUMBER '(&02)' IS '(&03)'
Meaning
(&00) : application name
(&01) : internet address of the host with which the application
is connected/disconnected
(&02) : port number of the host with which the application is
is connected/disconnected
(&03) : ATTACHED : the TCP application is attached to the host
DETACHED : the TCP application is removed from the host.
SDD1111
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1111 SERVER TASK ABNORMAL TERMINATION
SDD1112
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1112 TRACE SHUTDOWN PROBLEM; DPRT TASK STILL LIVING AFTER +/- 2 MINUTES
SDD1113
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1113 ERROR OCCURED IN DPRINT CENTRAL SERVER TASK DNET. CENTRAL SERVER TASK TO BE CONTINUED ? REPLY (Y=YES(BE SURE COMMUNICATIONS ARE AVAILABLE); N=NO (DNET TASK WILL NOT EXIST ANY MORE))
Meaning
Y : DNET task will be restarted.
Care must be taken that communications are available
N : DNET task will be destroyed
SDD1114
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD1114 /START-DPRINT-LOGGING COMMAND ACCEPTED. SYSTEM TRACE MANAGER HAS DISABLED DPRINT LOGGING. PROCESSING CONTINUES
SDD2000
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2000 HOME HOST CONFIGURATION MANAGER IS WAITING FOR RESPONSE FROM HOST '(&00)'. WAIT PROCESSING TO BE CONTINUED ? REPLY (Y=YES (STILL WAIT RESPONSE);N=NO (ABORT THE WAIT PROCESSING))
Meaning
(&00) : remote host name
Response
The following responses may be given :
During startup/restart :
- the completion of transfer of configuration file from master
- the completion of attachment of a remote slave host
During shutdown :
- the completion of transfer of cluster administration right to a slave
HOST
SDD2001
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2001 HOME HOST NOT DEFINED IN DPRINT CONFIGURATION FILE OF CLUSTER MASTER HOST
SDD2002
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2002 HOME HOST ATTACHMENT TO LOCAL CLUSTER CONFIGURATION FAILED. '(&00)' STARTUP/RESTART PROCESSING TO BE CONTINUED ? REPLY (Y=YES (CREATE A PRIVATE CLUSTER); N=NO (ABORT (&00) STARTUP/RESTART)
Meaning
An error occurred during home host attachment to the constituted local
cluster. Possible errors are :
-The cluster master host is not started.
- The home host is no more defined in the configuration file of the
contacted cluster master.
- Internal error on cluster master host during home host attachment
processing.
- Transfer of master configuration file not possible (FT error).
- Attachment aborted (response = N to message SDD2000).
- Remote host(s) communication error.
- Inconsistency detected in the configuration file.
(&00) : subsystem name : DPRINTCL,DPRINTSV,DPRINTCM
Response
N : The startup of &00 is aborted or the restart of DPRINTCM is aborted
(in this case the only accepted orders on configuration are
/STOP-SUBSYSTEM ..)
Y : The host is removed from the local cluster and put
in a private cluster (one host cluster).
-Automatic attachment when the master host is started.
After error correction the host may be:
- either reincluded in the local cluster in which it was previously
connected by a command /VERIFY-DPRINT-CONSISTENCY issued
on the local cluster master host (not on the private cluster)
- or included in another cluster by the command /MODIFY-DPRINT-CLUSTER
- or work alone in the private cluster.
SDD2003
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2003 DPRINT CONFIGURATION FILE MAY BE OUT OF DATE. HOME DPRINT CONFIGURATION TO BE USED FOR THE CLUSTER ? REPLY (Y=YES (SOME MODIFICATIONS MAY BE LOST; N=NO (ABORT HOME HOST ATTACHMENT TO CLUSTER))
Meaning
The home host is the first host of the cluster to be loaded
but has abnormally terminated the previous DPRINT session
or was not the last to be downloaded during the previous session.
The home configuration file is therefore perhaps out of date.
Response
Y : the home configuration is used as reference for the whole cluster.
N : the startup may be stopped or a private cluster may be constituted.
SDD2004
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2004 DPRINT CONFIGURATION FILE CANNOT BE TRANSFERRED TO HOST '(&00)' DUE TO FILE TRANSFER ERROR
Meaning
A File Transfer error has been detected during transfer of configuration
file from master host to local host.
SDD2005
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2005 INCONSISTENCY DETECTED IN DPRINT CONFIGURATION FILE
SDD2006
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2006 HOST '(&00)' ATTACHED TO THE LOCAL CLUSTER
SDD2007
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2007 DMS ERROR '(&00)' FROM INTERFACE '(&01)' FOR FILE '(&02)'. RETRY ? REPLY (Y=YES ; N=NO (A PRESET FILE IS CREATED FOR THIS SESSION))
Meaning
A DMS error occurred during processing of the file (&02). For more details
about DMS error code, enter /HELP-MSG DMS(&00)
(&00) : DMS error code
(&01) : DMS interface name
(&02) : filename
Response
Y : the file (&02) can be repaired or another DPRINT configuration file
can be imported under the same filename; the retry operation can thus be
performed.
N : no retry operation is performed. A default DPRINT configuration file
will be created.
SDD2008
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2008 DPRINT CONFIGURATION FILE IS RESET TO ITS PREVIOUS STATE. MODIFICATIONS OF LAST DPRINTCM SESSION ARE LOST. PROCESSING CONTINUES
Meaning
The DPRINT configuration file could not be opened.
The copy made at the beginning of the last DPRINTCM session is used.
All modifications done during the previous DPRINTCM session have thus to
be entered again.
SDD2009
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2009 A PRESET DPRINT CONFIGURATION FILE '(&00)' IS CREATED FOR THIS SESSION
Meaning
An error occurred while processing the DPRINT configuration file.
A preset one (&00) is assigned and contains default values.
SDD2010
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2010 A NEW DPRINT CONFIGURATION FILE '(&00)' IS CREATED WITH DEFAULT VALUES
SDD2013
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2013 FILE '(&00)' IS BEING PROCESSED
Meaning
The DPRINT configuration startup is processing the (&00) file
(&00) : DPRINT configuration filename
SDD2014
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2014 FILE '(&00)' PROCESSING COMPLETED
Meaning
The DPRINT configuration startup has finished to process (&00) file.
(&00) : DPRINT configuration filename
SDD2015
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2015 ANY FURTHER DPRINT CONFIGURATION UPDATE WILL OCCUR ONLY INTO MEMORY
Meaning
A DMS error occurred on the DPRINT configuration file which prevents the
file from being updated.
(An SDD0300 message has been previously sent to console)
From now, the updates will not appear any more in the DPRINT
configuration file.
If this happens on the master host, take care that the DPRINT
configuration file can not be transferred to the slave hosts
for configuration modifications.
Response
Try to correct the DMS problem, unload DPRINTCM and load it again
to keep coherence or change master.
SDD2016
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2016 TIME OUT FOR LOCAL HOST ATTACHMENT REACHED
Meaning
The local host is waiting for the confirmation from cluster master of
attachment to the local cluster.
SDD2017
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2017 TIME OUT FOR NEW CLUSTER MASTER DESIGNATION REACHED
Meaning
The master of the cluster tries to designate a successor before
terminating its shutdown
but does not receive response from remote host.
SDD2018
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2018 TIME OUT FOR REMOTE HOST ATTACHMENT REACHED
Meaning
The master host is waiting for the confirmation of attachment of a remote
host.
The remote host is in attachment phase but has not already sent the result
of attachment processing.
SDD2019
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2019 TIMEOUT FOR CONFIGURATION FILE TRANSFER TO HOST '(&00)' REACHED. WAIT PROCESSING TO BE CONTINUED ? REPLY(Y=YES(STILL WAIT FOR RESPONSE); N=NO(ABORT WAIT PROCESSING)
Meaning
(&00) : host name
A file transfer has been initiated with the host (&00) but no information
about the transfer issue has been received.
Response
Check that FILE TRANSFER started on local host and on master host.
Ask the FT/FTAC administrator to check the FT-OPTIONS parameters.
SDD2020
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2020 INVALID LOCAL PRINTER NAME FOR DISTRIBUTED PRINTER '(&00)'
Meaning
The local printer name is either not defined in the SPOOL parameters or
has an RSO printer type.
(&00) : printer name
Response
Ask the cluster administrator to correct the distributed printer
definition in the DPRINT configuration
or the spool administrator to correct the corresponding local spool device
definition in the SPOOL parameters.
Both updates must be performed by using SPSERVE.
SDD2021
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2021 DPRINT CONFIGURATION MANAGER STARTS ATTACHMENT TO CLUSTER MASTER HOST '(&00)'
Meaning
Due to DPRINT configuration startup or inconsistency state
the local host is reattached to the cluster master.
SDD2022
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2022 DPRINT CONFIGURATION MANAGER IN STARTUP PHASE. WAIT FOR COMPLETION? REPLY (Y=YES;N=NO)
Meaning
The task is waiting for completion of DPRINT configuration manager
startup.
Response
YES : The task waits until completion or next time out.
NO : The task is aborted.
SDD2023
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2023 DPRINT CONFIGURATION MANAGER IN RECOVERY PHASE. WAIT FOR COMPLETION? REPLY (Y=YES;N=NO)
Meaning
The task is waiting for completion of DPRINT configuration manager
recovery.
Response
YES : The task waits until completion or next time out.
NO : The task is aborted.
SDD2024
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2024 DPRINT CONFIGURATION MANAGER IN DELETE PHASE. WAIT FOR COMPLETION? REPLY (Y=YES;N=NO)
Meaning
The task is waiting for completion of DPRINT configuration manager delete.
Response
YES : The task waits until completion or next time out.
NO : The task is aborted.
SDD2025
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2025 DPRINT SERVER BELONGING TO HOST '(&00)' ATTACHED TO LOCAL CLUSTER
Meaning
(&00) : host name
The subsystem DPRINTSV is available on host (&00).
The printers attached to the corresponding server are available.
SDD2026
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2026 DPRINT SERVER BELONGING TO HOST '(&00)' DETACHED FROM LOCAL CLUSTER
Meaning
(&00) : host name
The subsystem DPRINTSV is no more available on host (&00).
The printers attached to the corresponding server are no more available.
SDD2027
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2027 A PRIVATE CLUSTER HAS BEEN FORCED BY HOST '(&00)'
Meaning
(&00) : host name
The master host has sent an order to force a private cluster on the home
host.
SDD2028
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2028 HOME HOST REMOVED FROM LOCAL CLUSTER BY HOST '(&00)'
Meaning
(&00) : host name
The master host has sent an order to leave the cluster.
Only the home host objects are kept in the DPRINT configuration file.
SDD2029
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2029 HOST '(&00)' STARTS ATTACHMENT TO LOCAL CLUSTER
Meaning
(&00) : host name
SDD2030
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2030 HOST '(&00)' DETACHED FROM LOCAL CLUSTER
Meaning
(&00) : host name
DPRINTCL and DPRINTSV subsystems are stopped on host (&00)
SDD2031
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2031 DPRINT CONFIGURATION MANAGER IN ERROR
Meaning
Due to an internal error, the configuration manager is not able to process
configuration management commands.
The DPRINT configuration manager can only support the commands :
/STOP-SUBSYSTEM DPRINTCL or /STOP-SUBSYSTEM DPRINTSV.
SDD2032
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2032 HOME HOST INCLUDED IN THE LOCAL CLUSTER
Meaning
The host is included in the cluster either after a startup processing
or after a /MODIFY-DPRINT-CONFIGURATION command issued on the master host.
SDD2033
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2033 ATTACHMENT TO LOCAL CLUSTER FAILED
SDD2034
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2034 HOME SERVER NOT DEFINED IN DPRINT CONFIGURATION FILE. DPRINTSV STARTUP ABORTED
Meaning
The home server object must be defined in the DPRINT configuration file
before starting DPRINTSV subsystem.
Response
The cluster administrator has first to define the home server in the
DPRINT configuration with SPSERVE.
SDD2035
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2035 TRANSFER OF DPRINT CONFIGURATION FILE NOT POSSIBLE DUE TO PREVIOUS DMS ERROR
Meaning
A DMS error previously occurred on the DPRINT configuration file.
(An SDD0300 message has been previously sent to console)
Response
Change master and try again the action on the new master host.
Before restoring the previous master,
unload and load again DPRINTCM on his host.
SDD2036
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2036 Invalid local printer name '(&00)' specified for distributed printer
Meaning
The local printer name is either not defined in the SPOOL parameters or
has an RSO printer type.
(&00) : printer name
Response
Ask the cluster administrator to correct the distributed printer
definition in the DPRINT configuration
or the spool administrator to correct the corresponding local spool device
definition in the SPOOL parameters.
Both updates must be performed by using SPSERVE.
SDD2100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2100 DPRINT REMOTE CLUSTER OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
The remote cluster name (&00) must be defined in the DPRINT configuration
to be considered as valid.
(&00) : remote cluster name
Response
Ask the cluster administrator to define the corresponding remote cluster
object in the DPRINT configuration with SPSERVE
or use an already existing remote cluster name.
SDD2101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2101 DPRINT HOST OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
The host name must be defined in the DPRINT configuration and attached to
the local cluster to be considered as valid.
(&00) : host name
Response
Ask the cluster administrator to define the corresponding host object in
the DPRINT configuration with SPSERVE
and to attach it with the /MODIFY-DPRINT-CLUSTER command or use an already
existing attached host name.
SDD2102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2102 DPRINT SERVER OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
The server name must be defined in the DPRINT configuration
and attached to the local cluster to be considered as valid.
(&00) : server name
Response
Ask the cluster administrator to define the corresponding server object in
the DPRINT configuration with SPSERVE
and to attach its corresponding host with the /MODIFY-DPRINT-CLUSTER
command.
SDD2103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2103 DPRINT PRINTER OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
The printer name (&00) must be defined in the DPRINT configuration to be
considered as valid.
(&00) : printer name
Response
Ask the cluster administrator to define the corresponding printer object
in the DPRINT configuration with SPSERVE
or use an already existing printer name.
SDD2104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2104 DPRINT PRINTER POOL OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
The printer pool (&00) must be defined in the DPRINT configuration to be
considered as valid.
(&00) : printer pool name
Response
Ask the cluster administrator to define the corresponding printer pool
object in the DPRINT configuration with SPSERVE
or use an already existing printer pool name.
SDD2105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2105 DPRINT ACCESS CONTROL OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE
Meaning
(&00) : access control name
Response
Ask the cluster administrator to define the corresponding access-control
object in the DPRINT configuration.
SDD2106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2106 INTERNAL ERROR DURING DPRINT CONFIGURATION ACCESS. COMMAND REJECTED
Meaning
An internal error has been returned by the DPRINT configuration access
interface.
SDD2107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2107 INVALID TYPE FOR REMOTE CLUSTER '(&00)'
Meaning
The remote cluster is a BS2000 one and has been defined with
TYPE=*UNIX-ISO or *UNIX-TCP
or has an ISO protocol and has been defined with TYPE=*BS2000 or *UNIX-TCP
or has a TCP protocol and has been defined with TYPE=*BS2000 or *UNIX-ISO
(&00) : remote cluster name
Response
Ask the cluster administrator to modify the type of the remote cluster,
via the //MODIFY-DPRINT-REMOTE-CLUSTER statement of SPSERVE
SDD2108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2108 NO INFORMATION ABOUT THE SPECIFIED OBJECT(S) EXISTS. COMMAND OR STATEMENT NOT PROCESSED
Meaning
The DPRINT configuration does not contain any information about the
specified object(s).
SDD2109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2109 SPOOL INFORMATION NOT AVAILABLE
Meaning
The SPOOL information hooked to the specified object are not available.
Either this information does not exist or is not accessible.
Only the distributed information is displayed.
SDD2110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2110 ACCESS TO SPECIFIED CLUSTER DENIED. COMMAND OR STATEMENT NOT PROCESSED
Meaning
The cluster name specified in the command/statement is not available.
Either it is not defined in the DPRINT configuration or access to this
cluster is not possible.
SDD2111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2111 ACCESS TO REMOTE SERVER DENIED
Meaning
The remote server on which the spool information is stored is not
accessible.
SDD2112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD2112 NO INFORMATION ATTACHED TO THIS OBJECT
Meaning
The object is defined in the DPRINT configuration but does not contain any
additional information.
SDD2113
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2113 INFORMATION TYPE NOT AVAILABLE
Meaning
The requested type of information is not available
or meaningful for this object in this environment
SDD2114
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD2114 Privilege too low
Meaning
The SHOW-DPRINT-ACCESS-CONTROLS command or statement is restricted
to the Cluster Administrator;
the SHOW-DPRINT-HOSTS command or statement is restricted
to the Cluster Administrator or Print Service Administrator.
SDD3000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3000 SCB NOT FOUND IN EQUISAMQ FILE FOR TSN '(&00)'
Meaning
The SCB corresponding to the job with tsn '(&00)' does not exist any more.
SDD3001
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3001 FT ERROR '(&00)' FROM INTERFACE '(&01)' DURING FILE CONTAINER PROCESSING FOR TSN '(&02)'
Meaning
An FT error '(&00)' has been detected during file transfer processing of
the print job file.
(&01) : FT interface name
(&02) : TSN of the job
For more detailed information about the FT error code see the BS2000
manual 'FT-BS2000'.
SDD3002
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3002 FT ERROR '(&00)' FROM INTERFACE '(&01)' DURING RESOURCES CONTAINER PROCESSING FOR TSN '(&02)'
Meaning
An FT error '(&00)' has been detected during file transfer processing of
the print job resource file.
(&01) : FT interface name
(&02) : TSN of the job
For more detailed information about the FT error code see the BS2000
manual 'FT-BS2000'.
SDD3003
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3003 FT ERROR '(&00)' FROM INTERFACE '(&01)' DURING FILE CONTAINER PROCESSING FOR JOB-ID '(&02)'
Meaning
An FT error has been detected during file transfer processing
of the print job file.
&00 : FT error
&01 : FT interface name
&02 : job identification in the remote cluster
For more detailed information about the FT error code see the BS2000
manual 'FT-BS2000'.
SDD3004
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3004 PARTNER-NAME FOR HOST '(&00)' NOT DEFINED IN DPRINT FILE TRANSFER CONFIGURATION FILE. HOST '(&00)' IS USED AS PARTNER-NAME. PROCESSING CONTINUES
Meaning
(&00) : host name
The FT partner-name is not defined in the file transfer configuration file
for the host (&00).
Response
Contact the PRINT-SERVICE administrator to update
the file transfer configuration file.
SDD3005
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3005 FT ERROR '(&00)' FROM INTERFACE NCOPY DURING DPRINT CONFIGURATION FILE PROCESSING
Meaning
An FT error '(&00)' occurred during file transfer processing of the
configuration file.
For more information about the FT error code see the BS2000
manual 'FT-BS2000'.
In case of syntax error, the reason could be in the
definition of the SYSPAR.DPRINT.<ver> where <ver> is
the version of DPRINT.
Response
Please, check the content of this file
SDD3006
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3006 FILE CONTAINER CREATION ERROR FOR TSN '(&00)'
SDD3007
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3007 RESOURCES CONTAINER CREATION ERROR FOR TSN '(&00)'
SDD3008
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3008 WARNING: SPACE SATURATION LEVEL '(&00)' FOR SYSDPRNT USER IDENTIFICATION
Meaning
(&00) : saturation level :
1 : saturation > 74%
2 : saturation > 89%
3 : saturation > 98%
Response
Contact System Support Staff to increase the user space available under
SYSDPRNT.
Otherwise DPRINT is locked for new print jobs processing.
Possible reasons :
- not enough user space under SYSDPRNT.
- many containers for jobs in WAIT state.
- too many print jobs in processing for the space available.
SDD3009
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3009 SPACE SATURATION FOR SYSDPRNT USER IDENTIFICATION PREVENTS FROM CONTAINER CREATION. CONTINUE ? REPLY(Y=YES(SATURATION WILL BE CHECKED AGAIN) ; N=NO(NO MORE CHECK FOR SATURATION))
Meaning
Contact System Support Staff to check the saturation level before replying
to the message.
Response
Y : the saturation will be checked again before processing continuation.
N : the processing of the current job will continue without checking the
saturation any more.
SDD3010
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3010 INTERNAL ERROR DURING THE DPRINT FILE TRANSFER PROCESSING FOR TSN '(&00)'. REASON : '(&01)'
Meaning
(&00) : TSN of the job
(&01) : internal error number :
01 : spool parameters access error on gateway.
02 : asynchronous communication error with DWTC task.
03 : structure manager internal error on gateway.
04 : asynchronous communication error with DPRP task.
05 : space saturation greater than level 2 under SYSDPRNT user
identification.
06 : CATAL interface error.
07 : error during the FT file transfer processing.
08 : system internal error (refer to the previous error messages).
09 : profile creation error on gateway host.
SDD3011
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
SDD3011 WARNING: FT/FTAC SUBSYSTEM NOT LOADED OR NOT ACTIVATED
Response
Contact the FT/FTAC administrator to reload or to reactivate FT/FTAC.
Otherwise DPRINT is locked for new print jobs processing.
SDD3012
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3012 INCOMPLETE FILE TRANSFER REQUEST FOR SERVER TSN '(&00)'. ERROR : '(&01)'. WHOLE REQUEST WILL BE RETRIED LATER
Meaning
The print job is put back into WFT state.
(&00) : server TSN of the print job
(&01) : error number :
1.byte: original host (where the error has been detected)
1: client host
2: gateway host
3: server host
2.byte: original system type
1: BS2000 system
2: SINIX system
3.byte: error type
1: DPRINTSV restart
2: $SYSDPRNT saturation
3: FT/FTAC not loaded or not activated
4.byte: 0
Response
Contact the PRINT-SERVICE administrator, if requested.
SDD3013
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3013 JOB WITH SERVER TSN '(&00)' DEFERRED BY DPRINT FILE TRANSFER PROCESSING. ERROR : '(&01)'
Meaning
The print job is put back into the KEEP queue until it is restarted
by means of the /RESUME-PRINT-JOB command.
(&00) : server TSN of the print job
(&01) : error number (only bytes 1-4)
1.byte: original host (where the error has been detected)
1: client host
2: gateway host
3: server host
2.byte: original system type
1: BS2000 system
2: SINIX system
3.byte: error type
1: file ft-init error
2: resource container ft-init error
3: file ft-result error
4: resource container ft-result error
5: user file input error
6: file container error
7: file filtered container error
8: resource input error
9: resource container error
A: internal error
B: $SYSDPRNT saturation
C: transfer admission not found
D: SCB error
E: section error
F: spool parameters access error
G: communication error
H: structure manager error
I: FT/FTAC not loaded or not activated
J: too long waiting time for file ft-result
K: too long waiting time for resource container ft-result
L: Ft file or resource container transfer abnormally terminated
M: UFS copy error
N: file filtered ft-init error
P: DPRINTCL subsystem not loaded
4.byte: second part return code type
0: no RC
1: FT RC
2: DMS RC
3: PRM RC
The complete return code is contained in the ERCOD field of
the /SHOW-PRINT-JOB-STATUS INFORMATION=DISTRIBUTED command :
5-8.byte: DMS RC ,FT RC or PRM RC (see 4.byte value)
sub RC1-main RC1 of FT general RC when 4.byte=1
in case of PRM RC, more information in message SPR0014
Response
Contact the PRINT-SERVICE administrator, if requested.
SDD3014
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3014 ERROR OCCURRED DURING INSERTION OF SINIX INFORMATION IN EQUISAMQ FILE FOR JOB-ID '(&00)'
Meaning
&00 : job identification in the remote cluster.
An error has been detected by the EQUISAMQ manager
during the insertion of the sinix information record.
Response
Please contact the PRINT-SERVICE administrator, if requested.
SDD3015
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3015 INTERNAL ERROR '(&00)' DURING DPRINT FILE TRANSFER PROCESSING FOR JOB-ID '(&01)'
Meaning
An internal error has been detected during the FT procesing.
&00 : internal error number :
01: communication error
02: internal error
03: asynchronous communication error with DPRP task
04: structure manager error
05: filtered container creation error
06: $SYSDPRNT saturation
07: FT/FTAC subsystem not loaded or not activated
08: filtered container ft-init error
09: configuration file access error
&01 : job identification in the remote cluster.
Response
Please contact the PRINT-SERVICE and/or FT administrator, if requested.
SDD3016
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3016 SINIX INFORMATION NOT FOUND IN EQUISAMQ FILE FOR TSN '(&00)'
Meaning
&00 : TSN of the job.
The sinix information record has not been found in the EQUISAMQ file.
Response
Please contact the PRINT-SERVICE administrator, if requested.
SDD3017
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3017 ERROR OCCURRED DURING UPDATE OF SINIX INFORMATION IN EQUISAMQ FILE FOR TSN '(&00)'
Meaning
&00 : TSN of the job.
An error has been detected by the EQUISAMQ manager during the update
of the sinix information record.
Response
Please contact the PRINT-SERVICE administrator, if requested.
SDD3018
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3018 SPOOLOUT ABORTED. ERROR CODE '(&00)' FOR THE SINIX FILE
Meaning
It is not possible to spoolout the SINIX JOB.
&00 : internal error number :
01 : SINIX file ft-init error
02 : SINIX file transfer abnormally terminated
03 : SINIX equisam record error on gateway
04 : CATAL interface error
05 : structure manager internal error on gateway
06 : transfer admission not found
07 : SCB error on gateway
SDD3019
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3019 FILE TRANSFER TASK SATURATION FOR TSN '(&00)'. PROCESSING CONTINUES
Meaning
(&00) : client TSN of the print job
The file transfer for the print job is in WAIT state for the FT product
because the number of jobs working with the FT product is too high
for the moment.
Response
Contact the PRINT-SERVICE and/or FT administrator, if requested.
SDD3020
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3020 FILE TRANSFER TASK SATURATION FOR SERVER TSN '(&00)'
Meaning
(&00) : server TSN of the print job
The file transfer for the print job is in WAIT state for the FT product
on the client or gateway host
because the number of jobs working with the FT product is too high
for the moment.
Response
Contact the PRINT-SERVICE and/or FT administrator, if requested.
SDD3021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SDD3021 SPOOLOUT ABORTED. FT ERROR CODE '(&00)'
Meaning
(&00) : FT return code described in FT-BS2000 user guide manual.
An FT error occurred during the DPRINT file transfer of
the user file or resources container;
the job can thus not be processed.
SDD3022
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3022 JOB WITH SERVER TSN '(&00)' NO MORE PROCESSED BY SERVER
Meaning
(&00) : server tsn of the print job
A /MODIFY-PRINT-JOB-ATTRIBUTES or /CANCEL-PRINT-JOB command
has been issued on the client host.
The job is no more processed on this server :
- either it has been cancelled on the client host
- or it has been redirected to another server from the client host.
SDD3023
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD3023 SPOOLOUT ABORTED. DMS ERROR CODE '(&00)' IN INPUT FILE
Meaning
For more detailed information about the DMS error code enter
/HELP-MSG DMS(&00) in system mode or see the BS2000 manual
'System Messages'.
A DMS error occurred at the container file creation or at the DPRINT file
transfer of the user file; the job can thus not be processed.
SDD3024
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SDD3024 Input file greater or equal to 32 Gbytes. Spoolout aborted
Meaning
Processing large files (greater or equal to 32 Gbytes)
is not supported. The print job cannot be processed.
SDD4000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD4000 EQUISAMQ ACCESS PROBLEM DURING SERVER '(&00)' INITIALIZATION. PROCESSING CONTINUES
Meaning
An error has been detected by the EQUISAMQ manager during the clean-up of
the SCB's which are currently processed by the server '(&00)'
Response
Contact System Support Staff
SDD4001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD4001 EQUISAMQ FILE ACCESS PROBLEM FOR TSN '(&00)'. PROCESSING CONTINUES
Meaning
(&00) : tsn of the job.
The EQUISAMQ file access parameter list has returned an error. The
processing continues without modification of the SCB.
The job state could be incoherent on client and server sides.
The server where the job is being processed has been removed from the
DPRINT configuration.
The print job may have been modified, while its original server was down,
and redirected to another running server.
SDD4002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD4002 SLOT MANAGER ACCESS ERROR DURING PROCESSING OF TSN '(&00)'. PROCESSING CONTINUES
Meaning
(&00) : tsn of the job.
processing continues without modification of the slot.
processing continues without modification of the SCB.
The job state could be incoherent on client and server sides.
The server where the job is being processed has been removed from the
DPRINT configuration.
The print job may have been modified, while its original server was down,
and redirected to another running server.
SDD4003
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD4003 PRINT JOB WITH CLIENT TSN '(&00)' AND SERVER TSN '(&01)' IS NO MORE PROCESSED BY SERVER '(&02)' OF CLUSTER '(&03)'
Meaning
(&00) : tsn of the print job on the client/gateway host
(&01) : tsn of the print job on the server host
(&02) : server name where the print job was processed
(&03) : cluster name where the print job was processed
Either the print job has been suppressed by a /CANCEL-PRINT-JOB command
or it has been abnormally terminated during printing.
SDD5000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD5000 DPRINT CLUSTER CREATION REQUEST FROM HOST '(&00)' ACCEPTED
SDD5001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD5001 DPRINT CLUSTER CREATION REQUEST FROM HOST '(&00)' REJECTED
SDD5002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD5002 DPRINT CONFIGURATION VERIFICATION REQUEST FROM HOST '(&00)' ACCEPTED. CURRENT HOST ASSIGNED AS NEW CLUSTER MASTER
SDD6000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD6000 '(&00)' COMMAND ACCEPTED BY REMOTE CLUSTER WITH JOB-ID '(&01)'
SDD6001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD6001 '(&00)' COMMAND REJECTED BY REMOTE CLUSTER WITH MESSAGE IDENTIFIER '(&01)'. ERROR CLASS : '(&02)'
Meaning
(&00) : command name
(&01) : remote spooler message identifier
(&02) : error class :
1 : parameter error
2 : system error
3 : remote spooler not available
4 : privilege error
5 : file transfer protocol error
6 : protocol error
7 : object not found
SDD6002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD6002 '(&00)' COMMAND REJECTED BY BS2000 REMOTE CLUSTER. REASON : '(&01)'
Meaning
(&00) : command name
(&01) : error class :
1 : command executed
2 : command executed with warning
3 : syntax error
4 : semantic error
5 : system error. command rejected
6 : privilege error
7 : validation error
8 : subsystem not available
SDD6003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD6003 COMMAND REJECTED BY REMOTE CLUSTER
Meaning
The request is unknown by the remote cluster and can thus not be
processed.
SDD6004
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD6004 INVALID CODED-CHARACTER-SET NAME RETURNED BY FILTER '(&00)'
Meaning
(&00) : coded character-set name
The coded-character-set name returned by the filter
may only be EDF041 or ISO88591
Response
Please contact Print-service Administrator.
SDD9000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SDD9000 CONFLICT BETWEEN '(&00)' AND '(&01)' OPERANDS. COMMAND REJECTED
Meaning
The servers of a remote cluster are not known by the users of the local
cluster.
CLUSTER-NAME and SERVER-NAME may not be specified together.
Response
Correct command and retry.
SDD9001
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SDD9001 INVALID VALUE IN SUBSYSTEM-PARAMETER OPERAND OF (&00) DPRINTCM COMMAND
Meaning
The subsystem-parameter operand may not be specified
oder hat einen ungueltigen Wert (/START-SUBSYSTEM).
(&00) : command name : /START-SUBSYSTEM or /STOP-SUBSYSTEM or
/RESUME-SUBSYSTEM or /HOLD-SUBSYSTEM
Response
Correct command and retry.