SDCCOPY

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDCCOPY   Copyright (C) '(&00)' '(&01)' All Rights Reserved

SDCLOAD

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDCLOAD   Program '(&00)',Version '(&01)' of '(&02)' loaded

SDC0001

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC0001   ERROR '(&00)' FROM INTERFACE'(&01)'

Meaning

(&00) : return code from interface standard header
(&01) : interface name

SDC0002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0002   System interface error. Command rejected. Contact System Support Staff

Meaning

A problem occurred with a system interface during the command processing.

Response

Refer to the previous error messages sent to SYSOUT and contact the
System Support Staff.

SDC0003

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC0003   ERROR '(&00)' FROM INTERFACE'(&01)'. ERROR LOGGING SEQUENCE NUMBER IS '(&02)'

Meaning

(&00) : return code from interface standard header
(&01) : interface name
(&02) : error logging sequence number

SDC0101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0101   CLASS '(&00)' MEMORY REQUEST ERROR

Meaning

(&00) : memory class

SDC0102

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0102   CLASS '(&00)' MEMORY RELEASE ERROR

Meaning

(&00) : memory class

SDC0203

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC0203   DPRINTCL SUBSYSTEM CAN NOT BE CREATED. SPOOL PARAMETERS INTERNAL VERSION '(&00)' NOT SUPPORTED

Meaning

(&00) : spool parameters internal version

Response

Use SPSERVE to migrate the spool parameters up to the supported version.

SDC0207

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC0207   DPRINTCL subsystem can not be created. DMS error '(&00)' during 'get', 'file' or 'open' processing. In system mode: /HELP-MSG DMS(&00)

Meaning

For more detailed information about the DMS error code enter /HELP-MSG
in system mode or see the BS2000 manual 'System Messages'.

Response

Try to correct the DMS error and retry startup.

SDC0208

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC0208   DPRINTCL subsystem can not be created. Invalid specification in '(&00)' parameter file

Meaning

The (&00) file does not exist
or a bad information has been introduced in the file.

Response

Correct or restore the (&00) file and retry startup.

SDC0210

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC0210   DPRINTCL SUBSYSTEM CAN NOT BE STOPPED OR HELD. '(&00)' TASK NOT ACCESSIBLE

Meaning

The distributed printers can not be stopped.
(&00) : tsn of the task

SDC0300

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0300   DMS ERROR '(&00)' FROM INTERFACE '(&01)' FOR FILE '(&02)'. FURTHER INFORMATION : /HELP-MSG DMS(&00)

Meaning

(&00) : DMS error code
(&01) : DMS interface name
(&02) : filename

SDC0700

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC0700   SPOOL '(&00)' TASK NOT ACCESSIBLE

Meaning

Due to a communication problem with a SPOOL task, the SPOOL request is
unsuccessfully terminated.
(&00) : tsn of the task

SDC0800

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0800   ILLEGAL COMBINATION OF OPERANDS. COMMAND REJECTED

Meaning

The operand syntax is correct but their combination is not allowed.

Response

Correct command and retry.

SDC0801

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC0801   LOGICAL VALIDATION PROBLEM DURING COMMAND PROCESSING. COMMAND REJECTED

SDC2000

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC2000   DEFAULT DPRINT-DESTINATION '(&00)' IN SPOOL PARAMETERS FILE IS NOT COMPATIBLE WITH DPRINT CONFIGURATION FILE. PROCESSING CONTINUES

Meaning

The POOL-NAME of the DPRINT-DESTINATION in the SPOOL parameters global
record is not defined in the DPRINT configuration.
(&00) : printer pool name.

Response

Ask the cluster administrator to add the corresponding printer pool in the
DPRINT configuration
or the SPOOL administrator to modify the DPRINT-DESTINATION in the SPOOL
parameters.
Both updates must be performed by using SPSERVE.

SDC2001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC2001   INTERNAL ERROR DURING DPRINT CONFIGURATION ACCESS

Meaning

An internal error has been returned by the DPRINT configuration access
interface.

SDC2002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC2002   DPRINT HOST OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE. PROCESSING CONTINUES

Meaning

(&00) : host name

Response

Ask the cluster administrator to define the corresponding host object in
the DPRINT configuration.

SDC2003

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC2003   DPRINT HOST OBJECT '(&00)' NOT DEFINED IN DPRINT CONFIGURATION FILE. COMMAND REJECTED

Meaning

(&00) : host name

Response

Ask the cluster administrator to define the corresponding host object in
the DPRINT configuration.

SDC2004

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC2004   HOST '(&00)' DOES NOT BELONG TO LOCAL CLUSTER. PROCESSING CONTINUES

Meaning

(&00) : host name
The command is not processed for host (&00)
The command may only concern host(s) attached to the local cluster. The
other hosts, if any, are treated.

Response

Ask the cluster administrator to include the corresponding host in the
local cluster.

SDC2005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC2005   HOST '(&00)' DOES NOT BELONG TO LOCAL CLUSTER. COMMAND REJECTED

Meaning

(&00) : host name
The command is not processed for host (&00)
The command may only concern host(s) attached to the local cluster.

Response

Ask the cluster administrator to include the corresponding host in the
local cluster.

SDC2006

Destination: CONSOLE               Routing code: S                   Weight: 99

Warranty   : NO

SDC2006   REMOVAL OF HOST '(&00)' FORCED BY RECOVERY PROCESSING

Meaning

(&00) : host name
After a /VERIFY-DPRINT-CONFIGURATION command, it appears that the host
(&00) does not belong to the local cluster.
The host is logically removed from the local cluster.

SDC2007

Destination: CONSOLE               Routing code: S                   Weight: 99

Warranty   : NO

SDC2007   RESTART OF HOST '(&00)' FORCED BY RECOVERY PROCESSING

Meaning

(&00) : host name
After a /VERIFY-DPRINT-CONFIGURATION command, it appears that the host
(&00) is removed from to the local cluster.
The host is logically removed from the local cluster and added again.

SDC2008

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC2008   THIS COMMAND WILL DESTROY THE CLUSTER CONFIGURATION. PROCESSING TO BE CONTINUED ? REPLY (Y=YES(DESTROY); N=NO(ABORT COMMAND PROCESSING))

Meaning

The delete request is sent to each host of the cluster.
Each host then removes all the objects which do not belong to itself
from its configuration file, leading to mutual ignorance between hosts
and lose of the cluster configuration.

SDC2009

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC2009   /DELETE-DPRINT-CLUSTER COMMAND WITHDRAWN BY CALLER

SDC2010

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC2010   Host '(&00)' does not belong to local cluster

Meaning

(&00) : host name
The command is not processed for host (&00).
The command may only concern host(s) attached to the local cluster.

Response

Ask the cluster administrator to include the corresponding host
in the local cluster.

SDC5000

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5000   LOCAL CLUSTER CONFIGURATION COMMAND ACCEPTED AND INITIATED

Meaning

Either a /CREATE-DPRINT-CLUSTER, /MODIFY-DPRINT-CLUSTER
/MODIFY-DPRINT-CONFIGURATION or /VERIFY-DPRINT-CONSISTENCY command has
been initiated.

SDC5001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5001   NO CURRENT LOCAL CONFIGURATION EXISTS. COMMAND REJECTED

SDC5002

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC5002   HOST '(&00)' ASSIGNED AS NEW CLUSTER MASTER

SDC5003

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5003   LOCAL CLUSTER CONFIGURATION ALREADY CREATED. COMMAND REJECTED

SDC5004

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5004   COMMAND RESTRICTED TO CLUSTER ADMINISTRATOR. COMMAND REJECTED

Meaning

The /DELETE-DPRINT-CLUSTER, /MODIFY-DPRINT-CLUSTER and
/MODIFY-DPRINT-CONFIGURATION commands
are restricted to the cluster administrator.

SDC5005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5005   COMMAND RESTRICTED TO SPOOL ADMINISTRATOR. COMMAND REJECTED

Meaning

The /CREATE-DPRINT-CLUSTER, /SHOW-DPRINT-CLUSTER and
/VERIFY-DPRINT-CONSISTENCY commands
are restricted to the print service administrator.

SDC5006

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC5006   ACCESS TO HOST '(&00)' REJECTED. REASON : '(&01)'

Meaning

(&00) : host name
(&01) : reason : 01 : communication problems
                 02 : neither DPRINTCL nor DPRINTSV subsystem is loaded
                      on host
                      or access denied by host (&00).
                 03 : the server of host (&00) is not defined
                      in the DPRINT configuration of the master host.

SDC5007

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC5007   HOST '(&00)' INCLUDED IN LOCAL CLUSTER

Meaning

(&00) : host name

SDC5008

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC5008   HOST '(&00)' NOT INCLUDED IN LOCAL CLUSTER

Meaning

(&00) : host name

SDC5009

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5009   NO CLUSTER MASTER CAN BE ASSIGNED

Meaning

Either the current cluster administrator can not assign a new cluster
master, via the /MODIFY-DPRINT-CONFIGURATION command
or any SPOOL administrator can not assign the new cluster master, via the
/VERIFY-DPRINT-CONSISTENCY command.

SDC5010

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5010   '(&00)' COMMAND ALREADY IN PROCESS. COMMAND REJECTED

Meaning

(&00) : command name :
       /CREATE-DPRINT-CLUSTER
       /DELETE-DPRINT-CLUSTER
       /MODIFY-DPRINT-CLUSTER
       /SHOW-DPRINT-CLUSTER
       /MODIFY-DPRINT-CONFIGURATION
       /VERIFY-DPRINT-CONSISTENCY

Response

Wait until command is terminated and retry.

SDC5011

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5011   COMMAND SUCCESSFULLY PROCESSED FOR HOST '(&00)'

SDC5012

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5012   HOST '(&00)' ALREADY BELONGS TO THE CLUSTER. PROCESSING CONTINUES

SDC5013

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5013   COMMAND RESTRICTED TO CLUSTER ADMINISTRATOR ON FIRST HOST OF HOST RECOVERY LIST. COMMAND REJECTED

SDC5014

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5014   HOST OF CLUSTER ADMINISTRATOR CAN NOT BE REMOVED FROM THE LOCAL CLUSTER CONFIGURATION

SDC5015

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC5015   COMMAND NOT PROCESSED FOR HOST '(&00)'

SDC6000

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SDC6000   COMMAND REJECTED BY FILTER '(&00)'. REASON : '(&01)'

Meaning

(&00) : filter name
(&01) : reason :
         00 : unknown signature
         01 : null request address
         02 : incorrect DOCUMENT-FORMAT parameter
         03 : incorrect LINE-SPACING parameter
         04 : the input file is not a file
         05 : the RECFORM of the file is not supported
         06 : the FCB type of the file is not supported
         07 : incorrect output file
         08 : memory request or release error
         09 : unknown action code
         10 : unknown protocol
         11 : input file corrupted
         12 : incorrect CCSNAME
         13 : FILTER subsystem error
         14 : internal error

SDC6001

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC6001   DMS ERROR '(&00)' FOR FILE '(&01)' DURING USE OF FILTER '(&02)'

Meaning

(&00) : DMS error code
(&01) : filename
(&02) : filter name

SDC6002

Destination: CONSOLE               Routing code: S                   Weight: 99

Warranty   : NO

SDC6002   DMS ERROR '(&00)' FOR FILE '(&01)'. RETRY ? REPLY (Y=YES ; N=NO)

Meaning

A DMS error occurred during processing of the file (&01).
For more details about the DMS error code, enter /HELP-MSG DMS(&00)
(&00) : DMS error code
(&01) : filename

Response

Y : the DMS operation on the file (&01) is performed again.
N : no retry is performed. The job is aborted.

SDC6003

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC6003   Command processed by generic filter

SDC6004

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC6004   Large file '(&00)' not supported during use of filter '(&01)'

Meaning

(&00): filename
(&01): filter name
A request for processing large files (greater or equal to 32 Gbytes)
is not supported. Print job processing aborted.
A trailer page will be printed on the server.

SDC7000

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7000   Error from SPOOL-PRINT interface '(&00)' for (&02) '(&03)'

Meaning

(&00): interface name: MODPJAT/CANPJOB
(&02): SERVER-TSN/CLIENT-TSN
(&03): distributed print job tsn

SDC7001

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7001   Error from SPOOL-PRINT interface '(&00)' for (&02) '(&03)'. Processing continues

Meaning

(&00): interface name: MODPJAT/CANPJOB
(&02): TSN/SERVER-TSN
(&03): distributed print job tsn

SDC7002

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7002   System interface error. Command abnormally terminated

Meaning

A problem occurred with a system interface during the command processing

Response

Refer to the previous error messages sent to SYSOUT/CONSOLE
and contact the System Support staff.

SDC7003

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7003   Error from SHOPJST SPOOL-PRINT interface

SDC7004

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7004   No print job corresponds to the specified operand values. Command not processed

SDC7005

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7005   Command abnormally terminated

SDC7006

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7006   The specified file '(&00)' has not the right format

Meaning

(&00): filename
The file must be a SAM file with:
-the contents of the first record is fixed
-the records length is less or equal to 64

SDC7007

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7007   '(&00)' print job(s) processed

SDC7008

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7008   Unable to cancel tsn '(&00)' on server '(&01)'

Meaning

(&00): print job tsn
(&01): server-name
The user tried to suppress a print job that
- no longer exists in the system
- does not belong to the user
The SELECT=*FROM-JOB-LIST option has been chosen
and the user is not allowed to use it
i.e. the user is not the Dprint Cluster Administrator
nor the Print Service Administrator on the server host.

SDC7009

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7009   Command completed with warning

SDC7010

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

SDC7010   Function not supported

Meaning

The current command requires at least SPOOL V03.2A.

SDC9000

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

SDC9000   INVALID VALUE IN SUBSYSTEM-PARAMETER OPERAND OF (&00) DPRINTCL COMMAND

Meaning

Either the subsystem-parameter operand may not be specified or a wrong
value has been specified
(&00) : command name : /START-SUBSYSTEM or /STOP-SUBSYSTEM or
/RESUME-SUBSYSTEM or /HOLD-SUBSYSTEM

Response

Correct command and retry.