Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0800 SYNTAX ERROR. CORRECT COMMAND OR MACRO
Meaning
Syntax error in operands of the request or an operand only
known by RSO is used in /PRINT-FILE command or in PRNT macro
and RSO is not operational.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
/REDIRECT-REMOTE-OUTPUT
SCP0801
Destination: USER-TASK, CONSOLE Routing code: S Weight: 98
Warranty : NO
SCP0801 SYNTACTICAL ERROR IN '(&00)' OPERAND. CORRECT COMMAND OR MACRO
Meaning
A syntactical error has been encountered in operand (&00)
during analysis of a request (command or macro).
The request is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
/REDIRECT-REMOTE-OUTPUT
/PRINT-DOCUMENT
SCP0802
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0802 OUTPUT WITH '12LPI' NOT POSSIBLE WITH LOOP '(&00)' IN FILE '(&01)'
Meaning
The density of the LOOP must be equal to 6 lines/inch to allow the 12 LPI
output requested by the specified control mode.
SCP0803
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0803 INCORRECT 'VFB' OR 'MXM' RECORD '(&01)' IN '(&00)' PRFILE. COMMAND MACRO REJECTED
Meaning
The values contained in the PRFILE lead to zero, or infinite value for
the line density or the character density.
VFB: vertical format buffer.
(&00): Name of PRFILE
(&01): Record key.
SCP0804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0804 INVALID VALUE OF OPERAND 'FIRST-CHARACTER' OR INVALID ISAM-KEY POSITION IN FILE '(&00)' WITH PHYSICAL CONTROL MODE
Meaning
To be printable with physical control mode, an ISAM file must
have its key starting at column 1 of the record.
If a FIRST-CHARACTER operand is given, it must be equal to the length of
the key +1.
Response
None.
SCP0805
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0805 NO USER MEMORY AVAILABLE. COMMAND TERMINATED
Meaning
During a /PRINT-FILE or /WRITE-DISKETTE or /WRITE-SPOOL-TAPE command
or a PRNT macro, a request for class 5 memory was unsuccessful.
The command cannot be executed.
Response
Release some class 5 memory and retry the command.
SCP0806
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0806 NO USER MEMORY AVAILABLE, NO SPOOLOUT POSSIBLE
Meaning
During /LOGOFF processing, a request for class 5 memory was unsuccessful.
The spoolout cannot be scheduled.
Response
None.
SCP0807
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0807 Warning: file lock not set for intercluster print requests
Meaning
A print request requiring the lock of the file has been
addressed to a remote BS2000 cluster. The request has
been accepted but the file has not been locked. This
option is ignored in intercluster request
SCP0808
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0808 Warning. Print request addressed to SINIX cluster with operand DELETE=YES/DESTROY. Option DELETE is ignored
Meaning
The print job is accepted but the DELETE option is
ignored. The delete of the file should be done
explicitly.
SCP0809
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0809 Printing to variable printer url is not supported by the currently installed RSO version. Command rejected
SCP0810
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0810 SPOOLOUT FOR FILE '(&00)' ACCEPTED. TSN: '(&01)', SPOOLOUT-NAME: '(&02)', MONJV: '(&03)'
Meaning
(&00): file name
(&01): TSN allocated on the client host (where the request is issued)
For jobs sent to remote clusters, the tsn has the value '*none'
(&02): SPOOLOUT-NAME
(NONE): when no SPOOLOUT-NAME was specified
(&03): name of the job variable which is monitoring the spoolout process
(NONE): no monitoring job variable was specified.
SCP0811
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0811 INCONSISTENCY BETWEEN '(&00)' AND '(&01)' OPERANDS. CORRECT COMMAND OR MACRO
Meaning
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
/REDIRECT-REMOTE-OUTPUT
/PRINT-DOCUMENT
SCP0812
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0812 ERROR IN '(&00)' OPERAND. CORRECT COMMAND OR MACRO
Meaning
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
SCP0813
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0813 '(&00)' ERROR '(&01)'. COMMAND OR MACRO REJECTED FOR FILE '(&03)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode or see BS2000 manual 'System Messages'.
The error occurred in one of the following commands or macros:
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
/CANCEL-PRINT-JOB
(&00): FSTAT or DMS
(&01): DMS error code.
SCP0814
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0814 COMMAND OR MACRO REJECTED FOR '(&01)' NONSHAREABLE FILES
Meaning
A request has been given for a partially qualified file name belonging to
another user ID by one of the following commands or macros.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
(&01): number of nonshareable files.
SCP0815
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0815 SYSTEM FILE '(&01)' DOES NOT EXIST. COMMAND OR MACRO REJECTED
Meaning
The request given for the system file by one of the following commands
or macros is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
(&01): system file name (*OMF,*SYSOUT,*SYSLST,...).
SCP0816
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0816 SYSTEM FILE '(&01)' IS NOT 'PRIMARY'. COMMAND OR MACRO REJECTED
Meaning
The request given for the system file by one of the following commands or
macros is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
(&01): system file name (*SYSOUT,*SYSLST,...).
SCP0817
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0817 FLUSH/CLOSE ERROR ON SYSTEM FILE '(&01)'. COMMAND OR MACRO REJECTED
Meaning
The request by one of the following commands or macros is rejected
for the system file (&01).
Command Macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
SCP0818
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0818 QUEUE ROUTINE ERROR CODE '(&00)'. COMMAND OR MACRO REJECTED FOR FILE '(&02)'
Meaning
The request for the file (&02) cannot be entered into the SPOOL queue.
The request by one of the following commands or macros is rejected for
this file.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
Response
Try again or contact the system support staff.
SCP0819
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0819 SPOOL NOT AVAILABLE. COMMAND OR MACRO RECORDED
Meaning
The SPOOL task is not available at the moment.
The request given by one of the following commands or
macros is recorded.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
SCP0820
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0820 '(&00)' VALUE GREATER THAN '(&01)' VALUE. COMMAND OR MACRO REJECTED
Meaning
The error occurred in one of the following commands or macros:
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH.
/PRINT-DOCUMENT
(&00): first operand in error (FIRST-CHARACTER or FIRST-RECORD)
(&01): second operand in error (LAST-CHARACTER or LAST-RECORD).
SCP0821
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0821 INCONSISTENCY BETWEEN '(&00)' OPERAND AND '(&01)' IMPLICIT OPERAND. COMMAND OR MACRO REJECTED
Meaning
The explicitly specified (&00) operand of a request (command or macro) is
inconsistent with the implicit (&01) operand (not explicitly specified
by the user).
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
SCP0822
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0822 SYSTEM FILE '(&01)' ASSIGNED TO A TAPE FILE. CORRECT COMMAND OR MACRO
Meaning
SYSLST, SYSLSTnn, SYSOUT or SYSOPT is assigned to a tape file and
the START-SPOOL=IMMEDIATE or =nn operand is also specified in the command.
The system file, however, can never be output to tape.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
Response
Correct the command or reassign the system file.
SCP0823
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0823 SYSTEM FILE '(&01)' ASSIGNED TO '*DUMMY'. COMMAND REJECTED
Meaning
An output system file is assigned to *DUMMY when one of the following
commands (with or without the START-SPOOL operand) is issued or processed.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
Response
Reassign the system file if appropriate and retry the command.
SCP0824
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0824 SYSTEM FILE '(&01)' NOT ASSIGNED TO A SAM FILE. COMMAND REJECTED
Meaning
The SYSLSTnn system file is either assigned to PRIMARY or to another
*SYSLSTpp system file or to a library element.
As a result, the request is rejected.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
(&01): SYSLSTnn system file (nn=01 to 99).
Response
Reassign eventually the corresponding SYSLSTnn system file and
try again the command.
SCP0825
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0825 NO PREVIOUS DECLARATIVE REQUEST REGISTERED. COMMAND REJECTED FOR SYSTEM FILE '(&01)'
Meaning
A START-SPOOL=NO operand as been given for a system file (&01)
in a /PRINT-FILE, /WRITE-SPOOL-TAPE, /WRITE-DISKETTE command
or a JOB-IDENTIFICATION=*SYSTEM-FILE(NAME=(&01)) operand
has been given in a /CANCEL-PRINT-JOB command and no previous
declarative command has been processed.
SCP0826
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0826 SYSTEM FILE '(&01)' IS EMPTY. COMMAND REJECTED
Meaning
One of the following commands with the operand START-SPOOL=IMMEDIATE
(or with default value) is given for a system file which is empty.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0827
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0827 DECLARATIVE REQUEST ALREADY ACTIVE. COMMAND REJECTED FOR SYSTEM FILE '(&01)'
Meaning
One of the following commands is given for the system file (&01),
for which a declarative command with the START-SPOOL=CLOSE or
START-SPOOL=value operand has been entered previously.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
Response
First enter a command with the START-SPOOL=NO operand, then
retry the desired command.
SCP0828
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0828 SYSTEM FILE '(&01)' ASSIGNED TO A TEMPORARY FILE. COMMAND REJECTED
Meaning
One of the following commands with the operand START-SPOOL=IMMEDIATE
or START-SPOOL=value is given for the system file (&01),
which is assigned to a temporary file.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0829
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0829 DECLARATIVE COMMAND FOR SYSTEM FILE '(&01)' REGISTERED
Meaning
One of the following declarative commands has been correctly
processed for system file (&01); the spoolout parameters
were saved to be retrieved during the actual spoolout activation.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0830
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0830 WRONG CHANNEL 1 POSITION IN THE LOOP DEFINED BY THE 'LOOP-NAME' OR 'FORM-NAME' OPERAND '(&00)'
Meaning
There is not enough space left between the channel 1 position (first line
of output) and the end of the printer page to allow printout with the
operands specified in the /PRINT-FILE or /PRINT-DOCUMENT command.
Response
Possible measures:
- Correct the channel 1 position in the LOOP of the PRFILE
used.
- Correct the operand values in the /PRINT-FILE or /PRINT-DOCUMENT
command.
SCP0831
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0831 CCSNAME '(&01)' IS UNKNOWN TO XHCS. COMMAND REJECTED FOR FILE/PLAM ELEMENT '(&00)'
Meaning
XHCS : eXtended Host Code Support
CCSNAME : Coded Character Set NAME
SCP0832
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0832 OPERAND NOT ALLOWED UNDER THIS USERID. COMMAND REJECTED
Meaning
The following operands of the /PRINT-FILE or /WRITE-SPOOL-TAPE
command are only allowed for the SPOOL administrator.
PROCESSING-ADMISSION
PRINT-JOB-CLASS
Command processing is aborted.
SCP0833
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0833 '*SYSOUT' NOT ALLOWED FOR INTERACTIVE TASK
Meaning
In an interactive task, one of the following commands is issued
for *SYSOUT. Such a request is not allowed.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE.
SCP0834
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0834 ERROR CODE '(&00)' WHEN PROCESSING REMOTE SPOOL. SPOOLOUT REDIRECTED TO CENTRAL PRINTER
Meaning
The request by one of the following commands or macros is redirected
to the local SPOOL.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
SCP0835
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0835 OPERAND 'LINE-SPACING' DOES NOT ALLOW 'RECFORM=U'. COMMAND REJECTED FOR FILE '(&00)'
Meaning
The LINE-SPACING operand may not be specified for a file created with
RECFORM=U. The request given for the file by one of the following commands
or macros is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/PRINT-DOCUMENT
SCP0836
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0836 '(&00)' ONLY ALLOWED FOR '*SYSOUT' OR '*SYSLST' IF 'LINE-SPACING=1/2/3' IS SPECIFIED. COMMAND REJECTED
Meaning
The OUTPUT-FORMAT, HEADER-LINE=DATE/FIRST-RECORD/PAGE-NUMBER and
LINES-PER-PAGE operands may not be specified for the system file *SYSOUT
or *SYSLST unless the operand LINE-SPACING=1/2/3 is given as well.
The request (command or macro) is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
(&00): OUTPUT-FORMAT or
HEADER-LINE=DATE/FIRST-RECORD/PAGE-NUMBER
LINES-PER-PAGE .
SCP0837
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0837 'DELETE-FILE=YES/DESTROY' MAY NOT BE SPECIFIED FOR SYSTEM FILE '(&01)' ASSIGNED TO A SAM FILE. COMMAND REJECTED
Meaning
The DELETE-FILE=YES/DESTROY operand may not be specified in any of the
following commands for system file (&01), which is assigned to a
SAM file.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
Response
Correct and repeat the command.
SCP0838
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0838 'DEVIN=TAPE' MAY NOT BE SPECIFIED FOR EAM SYSTEM FILE OR FOR SAM FILE ON DISK. COMMAND REJECTED FOR SYSTEM FILE '(&01)'
Meaning
The operand DEVIN=TAPE may only be specified for a system file which is
assigned to a SAM file on tape; in all other cases it is rejected.
macro
PRNT
Response
Correct and repeat the command.
SCP0850
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0850 FILE '(&01)' CURRENTLY IN USE. COMMAND REJECTED
Meaning
The request by one of the following commands or macros is rejected for
this file.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH
Response
Try again later.
SCP0851
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0851 'DELETE-FILE=YES/DESTROY' CURRENTLY IN PROCESS FOR FILE '(&01)'. COMMAND REJECTED
Meaning
The file (&01) is deleted as soon as the spoolout process is terminated.
The request by one of the following commands or macros is rejected for
this file.
command macros
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0852
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0852 'DEVIN=TAPE' ONLY ALLOWED FOR SAM TAPE FILE. COMMAND REJECTED FOR FILE '(&01)'
Meaning
The DEVIN=TAPE operand has been specified but the file (&01) is not a
SAM tape file.
The request specified by a command or macro is rejected for this file.
SCP0853
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0853 A TAPE FILE CANNOT BE SPOOLED OUT ON ANOTHER TAPE. COMMAND REJECTED FOR FILE '(&01)'
Meaning
The TAPE=YES or TAPE=<density> operand has been specified.
The file (&01) is a tape file which cannot be spooled out on another tape
(only disk files may be written to tape).
The request by one of the following commands or macros is rejected for
this file.
command macros
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0854
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0854 ONLY SAM TAPE FILES ARE SUPPORTED BY SPOOL. COMMAND REJECTED FOR FILE '(&01)'
Meaning
The file (&01) is not a SAM tape file.
The request by one of the following commands or macros is rejected for
this file.
command Macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0855
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0855 OPERAND 'LOCK-FILE=YES' IS IGNORED FOR TAPE FILE '(&00)'
Meaning
A tape file cannot be locked.
SCP0856
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0856 TAPES WITHOUT STANDARD LABELS ARE NOT SUPPORTED BY SPOOL. COMMAND OR MACRO REJECTED FOR FILE '(&00)'
Meaning
The tape with file (&00) has no standard labels.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0857
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0857 CREATION OR EXPIRATION DATE IS 'NONE'. COMMAND REJECTED FOR FILE '(&01)'
Meaning
The request by one of the following commands or macros is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0858
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0858 FILE '(&01)' IS EMPTY. COMMAND REJECTED
Meaning
The 'last page used' field in the catalog entry of the file is zero
(LASTPG=00000000).
Response
Check the file.
SCP0859
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0859 'RECFORM=F' AND 'RECSIZE=0'. COMMAND REJECTED FOR FILE '(&01)'
Meaning
The record format of the file (&01) is fixed (RECFORM=F) but the record
size is zero (RECSIZE=0).
The request specified by one of the following commands or macros
is rejected.
command macro
/PRINT-FILE PRNT
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE PNCH .
SCP0860
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0860 FILE '(&01)' PROTECTED BY A READ OR EXEC PASSWORD. COMMAND REJECTED
Meaning
The password has not been specified previously by the user with a
/ADD-PASSWORD command. The request specified by one of the following
commands is rejected.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0861
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0861 ERROR CODE '(&00)' DURING LOCKING OF FILE '(&02)'. COMMAND REJECTED
Meaning
The request specified by one of the command listed below or by a macro is
rejected.
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE
/MODIFY-SPOOL-JOB-ATTRIBUTES
/MODIFY-PRINT-JOB-ATTRIBUTES
Response
RESPONSE : NONE
Please contact System Support Staff
SCP0862
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0862 FILE '(&00)' BELONGS TO FOREIGN USER ID. 'DELETE-FILE=YES/DESTROY' OPTION IGNORED
Meaning
A request to erase file (&00) was issued in one of the commands listed
below or in a macro. However, as this file belongs to a different user ID
or has access protection of the access control list, the
DELETE-FILE=YES/DESTROY option is ignored.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE
SCP0863
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0863 ERASURE OF A FILE GENERATION IS NOT ALLOWED. 'DELETE-FILE=YES/DESTROY' SUPPRESSED FOR FILE '(&00)'
Meaning
DELETE-FILE=YES/DESTROY has been specified in one of the commands listed
below or in a macro.
However, as the file (&00) is a file generation, this option is ignored.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0864
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : YES
SCP0864 FILE '(&00)' CANNOT BE DELETED BECAUSE IT IS CATALOGUED 'ACCESS=READ'. 'DELETE-FILE=YES/DESTROY' OPTION SUPPRESSED
Meaning
DELETE-FILE=YES/DESTROY has been specified in the command or macro.
However, as the file (&00) can only be accessed in read mode, this
option is ignored.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE
SCP0865
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0865 LOCAL SPOOL I/O TRACE ERROR; TRACE PROCESSING TERMINATED
SCP0866
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0866 EXPIRATION DATE NOT REACHED FOR FILE '(&00)'. 'DELETE-FILE=YES/DESTROY' OPTION SUPPRESSED
Meaning
A request to erase file (&00) was issued in one of the commands listed
below or in a macro. However, for this file a retention period is given.
The end of the retention period can be displayed by the command
/SHOW-FILE-ATTR F-NAME=(&00),INF=ALL-ATTR (see EXDATE field).
The specified DELETE-FILE=YES option is not processed.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
Response
If necessary, cancel the retention period and delete the file.
SCP0867
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0867 FILE '(&01)' IS A FGG GROUP INDEX. COMMAND REJECTED
Meaning
A request to output a file was issued by one of the commands listed
below. However, this file is a FGG (file generation group) group index
for which a spoolout is not allowed. As a result the spoolout request
is rejected.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0870
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0870 EAM RETURN CODE '(&00)'. COMMAND REJECTED FOR FILE (NUMBER) '(&02)'
Meaning
The request issued by one of the commands listed below or by a macro is
rejected.
command
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
Response
For information about the EAM return code see the manual
'DMS Assembler Interface'.
SCP0871
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0871 EAM FILE '(&01)' CONTAINS NO DATA. COMMAND REJECTED
Meaning
The EAM file (&01) is empty.
The request issued by one of the commands listed below or by a macro is
rejected.
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0872
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0872 MISSING OR INCOMPLETE DEFINITION OF FORM '(&00)' IN SPOOL.PARAMETERS FILE. COMMAND REJECTED FOR REASON '(&01)'
Meaning
- the specified form has not been defined in the SPOOL.PARAMETERS file :
01 : for the device types specified in the POOL
or for distributed printer pool,
the servers can be not loaded or not accessible
02 : for the device type specified in the command
03 : for the device type requested by some parameters of the command
04 : for the local device types
05 : for the device types and/or the rotation specified in the GEN record
06 : on the server host to satisfy the client request
07 : on the server host to fit with these specified on the client host.
08 : for the device types (rso/local) reachable after filtering
Response
Possible measures:
- Add the required data to the appropriate SPOOL files
- Request the SPOOL administrator to set the global
value in DEVICE-TYPE to YES.
SCP0873
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0873 SYSTEM ERROR IN SPOOL PARAMETER ACCESS. COMMAND REJECTED
Meaning
Further diagnostic data is stored in the system error logging file.
Response
Contact the SPOOL administrator.
SCP0874
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0874 REMOTE FILE ACCESS NOT SUPPORTED BY SPOOL. SPOOLOUT OF FILE/CATID '(&00)' NOT POSSIBLE. COMMAND REJECTED
Meaning
(&00): file name or catalog ID.
SCP0875
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0875 Encrypted file not supported. Command or macro rejected for file '(&00)'.
Meaning
A request given for an encrypted file by a print command
or macro is rejected
(&00) : File name
SCP0878
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0878 ERROR DURING VALIDATION OF REQUESTED RSO PRINTER. COMMAND NOT PROCESSED
Meaning
Possible reasons for the error detected during station validation are:
- the RSO printer is not defined in the SPOOL parameter file;
- at least one of the specified operands (FORM-NAME, LOOP-NAME,
CHARACTER-SETS) is unknown or not permitted for this printer;
- the software product RSO is not loaded.
Response
Check the definitions in the SPOOL parameter file.
SCP0880
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0880 SPOOLOUT OF SYSTEM FILE '(&00)' ACCEPTED: TSN '(&01)', SPOOLOUT-NAME '(&02)', SEQ '(&03)', MONJV '(&04)'
Meaning
Spoolout of a segment of a SYSLST or SYSLSTnn system file has been
activated.
(&00): name of the system file
(&01): TSN allocated
(&02): SPOOLOUT-NAME
(NONE): no SPOOLOUT-NAME was specified
(&03): sequence number of the corresponding segment
(&04): name of the monitoring job variable
(NONE): no monitoring job variable was specified.
SCP0881
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0881 SPOOL VERSION INCOMPATIBILITY. COMMAND REQUEST ACTIVATION REJECTED FOR SYSTEM FILE '(&01)'
Meaning
The SPOOL version is not the same when a declarative command is
processed and when the actual spoolout is activated; this occurs, for
example, when a /RESTART-PROGRAM command is processed by another SPOOL
version than that loaded when setting a checkpoint.
The request specified by one of the following commands is rejected.
/PRINT-FILE
/WRITE-SPOOL-TAPE
/WRITE-DISKETTE .
SCP0882
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0882 Large file not supported. Command or macro rejected for file '(&00)'
Meaning
A request given for a large file > 32 GB by a print command or
macro is rejected.
(&00) : file name
SCP0883
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0883 Subscription to Notification Service failed. No Notification will be processed
Meaning
You specified a notification order in your print command but
the Notification Service did not receive it. If you specified
an explicit subscription, you will not be notified, and if
you specified that you did not want to be notified, you
might be notified according to permanent subscriptions
Response
Please contact your system administrator
SCP0884
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0884 Subscription to Notification Service failed. Command rejected
Meaning
You specified a notification request in your print command
with invalid notification parameters:
- object name does not exist
- at least one specified event does not exist
- the notification method does not exist
Response
Please contact your system administrator
SCP0885
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0885 Printer type '(&00)' could not be used because such a device type is not present in the configuration
Meaning
The printer type is not retained because it is
not present in the configuration.
SCP0886
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0886 The device '(&00)' does not fit the '(&01)' operand
Meaning
The device does not support the requested operand.
SCP0887
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0887 The print job is not launched because of use of trial mode
Meaning
The print job is not launched because the operand
TRIAL-MODE=*YES was specified.
SCP0888
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0888 SPOOL REQUEST WITH INVALID OR INCOMPLETE CONTROL INFORMATION. COMMAND REJECTED
Meaning
The specified request cannot be properly processed by any of the defined
SPOOL devices. Possible reasons are explained by the preceding messages.
Response
Add/correct the missing/invalid element to/in the corresponding
system/user resources files
SCP0889
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0889 The print job cannot be processed by '(&00)' printers
Meaning
The print job validation detected that no spoolout
is possible on the specified printer type.
The reason is described by the preceding message
SCP0890
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0890 Printer '(&00)' is not '(&01)' conformant
Meaning
The print job validation detected that the print job
is not possible on the specified printer due to
the specified printer characteric.
SCP0891
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0891 CANCEL PROCESSING INITIATED FOR '(&02)' '(&00)', USER-ID '(&01)'
Meaning
The /CANCEL-JOB or /CANCEL-PRINT-JOB command has been accepted
for TSN (&00) belonging to user ID (&01).
(&02) : 'TSN' or 'JOB-ID'
The /CANCEL-JOB or /CANCEL-PRINT-JOB command is accepted for TSN (&00)
(BS2000 job) or for JOB-ID (&00) (not BS2000 job) belonging to user ID
(&01)
Response
RESPONSE : NONE
SCP0892
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0892 TSN '(&00)' NOT FOUND OR COMMAND PROCESSING ILLEGAL. COMMAND TERMINATED
Meaning
The user has submitted one of the following commands for a TSN which
- does not/no longer exist(s) in the system
- is an RBP job
- does not belong to the user.
/CANCEL-JOB
/CANCEL-PRINT-JOB
/CHANGE-JOB-PRIORITY.
/MODIFY-PRINT-JOB-ATTRIBUTES
/SHOW-PRINT-JOB-ATTRIBUTES
SCP0894
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0894 COMMAND ACCEPTED FOR TSN '(&00)', USER-ID '(&01)'
Meaning
The /CHANGE-JOB-PRIORITY or /MODIFY-PRINT-JOB-ATTRIBUTES command is
accepted for TSN (&00) belonging to user identification (&01).
TSN is the tsn specified in the command; either the client tsn,
explicitly specified or via monjv), or the server tsn, (explicitly
specified)
SCP0895
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0895 INTERNAL ERROR IN '(&00)'. ABNORMAL TASK TERMINATION CALLED
Meaning
A system error has occurred during /CANCEL-JOB,/SHOW-JOB-STATUS,
/SHOW-SYSTEM-STATUS, SHOW-USER-STATUS, SHOW-PRINT-JOB-STATUS,
/CHANGE-JOB-PRIORITY command processing.
(&00): name of the erroneous internal interface (only use for
debugging).
Response
None.
SCP0896
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0896 '(&00)' NOT LOADED OR NOT READY. COMMAND REJECTED
Meaning
The command calling the subsystem specified by (&00) via
SVC107 or 108 is not processed because this subsystem is
not loaded or not ready
(&00) : subsystem name
Response
Ask the system support staff to start the appropriate subsystem
SCP0897
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0897 TSN '(&00)' NOT FOUND OR SPOOLOUT TASK ALREADY RUNNING. COMMAND IGNORED
Meaning
- The TSN (&00) has not been found because it does not exist anymore
- or because the corresponding job is active
The modification of print job operands has no meaning when
the job is currently in process
- or because the requestor does not have the privilege
(&00): TSN specified in the command or extracted from
the SPOOL monitoring job variable
Response
RESPONSE : NONE
SCP0898
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0898 SIZE OF '(&00)' WITH NAME '(&01)' IN PRFILE '(&02)' EXCEEDS THE DEFINED LIMIT FOR DEVICE TYPE '(&03)'. COMMAND REJECTED
Meaning
The command specifies a forms overlay buffer (FOB) or
character set pool whose size exceeds the limit defined in the
SPOOL.PARAMETERS file.
(&00): FOB or CHAR-SET POOL
(&01): name of FOB or CHAR-SET POOL
(&02): file name of the PRFILE.
SCP0899
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0899 'LEFT-MARGIN' OPERAND NOT ALLOWED WHEN 'ROTATION' OPERAND IS GIVEN. COMMAND REJECTED
SCP0900
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP0900 'ROTATION' NOT SUPPORTED ON THE INSTALLATION. COMMAND REJECTED
Meaning
In the SPOOL parameter file, the value for ROTATION is 'NO', meaning
that ROTATION is not allowed.
SCP0901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0901 CHARACTER SET NUMBER SPECIFIED FOR CHARACTER SET POOL '(&00)' DOES NOT EXIST IN PRFILE '(&01)' FOR DEVICE TYPE '(&02)'. COMMAND REJECTED.
Meaning
The user has specified a character set pool and an index which exceeds
the number of character sets in the pool.
(&00): character set pool name
(&01): name of PRFILE.
(&02): device type
SCP0902
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0902 '(&01)' IS MANDATORY FOR OPERAND '(&00)'. CORRECT COMMAND OR MACRO
Meaning
The operand (&01) must be specified in the command or macro
when the operand (&00) is present.
SCP0903
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0903 A ROTATION IS REQUESTED BUT THE FORM '(&00)' HAS NO ROTATION LOOP
SCP0904
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0904 DEVICE NAME NOT SPECIFIED. COMMAND REJECTED
Meaning
The device name is mandatory for this command.
SCP0905
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0905 LENGTH OF LOOP '(&00)' DEFINED IN FILE '(&01)' INCOMPATIBLE WITH '(&02)' OF THE SPECIFIED FORM FOR DEVICE TYPE '(&03)'. COMMAND REJECTED
Meaning
The calculated lengths of the LOOP of the specified form and of the
LOOP specified in the /PRINT-FILE or /PRINT-DOCUMENT command must be less
than or equal
to the PAGE-SIZE of the specified form.
If both LOOP and PAGE-SIZE are used, they must have the same length.
(&00): LOOP name
(&01): file name
(&02): PAGE-SIZE / LINE-SIZE.
Response
Select compatible LOOPs.
SCP0906
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0906 System printer '(&00)' has been selected as device name. Command rejected
Meaning
A system printer has been selected as device name.
(&00) : Device name
SCP0907
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0907 '(&00)' DEVICE NOT ACTIVE. STATUS UPDATE NOT POSSIBLE. COMMAND REJECTED
Meaning
The /MODIFY-<device>-OUTPUT command (where <device> may be PRINTER, TAPE
or DISKETTE) can only be given for an active device.
SCP0908
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0908 SPECIFIED VALUE OF 'REVISION-NUMBER' OPERAND DOES NOT MATCH STATUS OF DEVICE '(&00)'. COMMAND REJECTED
Meaning
The revision number in the command does not correspond to the actual
status of device (&00).
Response
Information about the current revision number can be obtained by means of
the command /SHOW-ACTIVE-SPOOL-DEVICE <device>.
SCP0909
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0909 '*ADD' OR '*REMOVE' SPECIFICATION ONLY POSSIBLE WITH 'USE=UPDATE'. COMMAND REJECTED
Meaning
The modification of a list is only possible with USE=UPDATE.
SCP0910
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0910 LIST '(&00)' FOR DEVICE '(&01)' EXCEEDS MAXIMUM LENGTH. COMMAND REJECTED
Meaning
(&00): SPOOLOUT-CLASS
FORM-NAME
USER-IDENTIFICATION
FORM-OVERLAY
SPOOLOUT-NAME
ACCOUNT-NUMBER
DESTINATION
(&01): device name or mnemonic.
The maximum length of a list is 100 for DESTINATION and 16 for
all other lists.
SCP0911
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0911 RSO SUBSYSTEM CANNOT CURRENTLY BE ACCESSED. RETRY COMMAND LATER
Meaning
The RSO devices cannot currently be accessed because the RSO subsystem is
being dumped or recovered.
SCP0912
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0912 NO DEVICE MATCHES SPECIFIED OPERAND VALUES. COMMAND NOT EXECUTED
SCP0913
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0913 DEVICE '(&00)' NOT ACTIVE OR ACCESS NOT PERMITTED FOR USER. COMMAND NOT EXECUTED
SCP0914
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0914 LIST '(&00)' FOR DEVICE '(&01)' IS EMPTY. COMMAND REJECTED
Meaning
An *ADD or *REMOVE operand has been specified for an empty list.
(&00): SPOOLOUT-CLASS
FORM-NAME
USER-IDENTIFICATION
FORM-OVERLAY
SPOOLOUT-NAME
ACCOUNT-NUMBER
DESTINATION
(&01): device name or mnemonic.
SCP0915
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0915 AN ELEMENT TO BE REMOVED FROM LIST '(&00)' DOES NOT EXIST. STATUS OF DEVICE '(&01)' NOT MODIFIED
Meaning
The command is not executed for this device.
If more devices are specified in the command, command processing
continues with the next device specified.
(&00): SPOOLOUT-CLASS
USER-IDENTIFICATION
FORM-NAME
FORM-OVERLAY
SPOOLOUT-NAME
ACCOUNT-NUMBER
DESTINATION
(&01): device name or mnemonic.
SCP0916
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0916 LIST '(&00)' FOR DEVICE '(&01)' CONTAINS EXACTLY THOSE ELEMENTS TO BE REMOVED. ENTER '*ALL' FOR THIS LIST OR STOP THE DEVICE
Meaning
(&00) : scheduling operands:
SPOOLOUT-CLASS
USER-IDENTIFICATION
FORM-NAME
FORM-OVERLAY
SPOOLOUT-NAME
ACCOUNT-NUMBER
DESTINATION
(&01): device name or mnemonic.
Response
To remove all the elements from the list:
- halt the device with the /STOP-PRINTER-OUTPUT command or
- permit *ALL for the list.
To modify the list, enter the command /MODIFY-PRINTER-OUTPUT-STATUS.
SCP0920
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0920 SYSTEM ERROR IN SUB TCB PROCESSING. COMMAND NOT PROCESSED
Meaning
Due to a system error, the command could not be processed.
A SERSLOG entry is created.
Response
Contact the system support staff.
SCP0921
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0921 NO CLASS 4 MEMORY AVAILABLE. COMMAND REJECTED
Response
Wait and retry or call the system support staff.
SCP0922
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0922 SYSTEM ERROR WHILE ASSIGNING A TSN TO THE JOB. COMMAND NOT PROCESSED
SCP0923
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0923 SYSTEM ERROR WHILE ACCESSING USER ID, ACCOUNT NUMBER OR JOB NAME. COMMAND NOT PROCESSED
Meaning
Due to a system error, the necessary information cannot be obtained.
A SERSLOG entry is created.
Response
Contact the system support staff.
SCP0924
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0924 WARNING: RELEASE ERROR FOR CLASS 5 MEMORY
SCP0925
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0925 USER HAS NO FILE ACCESS AUTHORIZATION FOR FILE '(&01)'. COMMAND '(&00)' REJECTED
Meaning
Possible reasons:
- the file is not shareable
- the file is password protected
- the file is protected by ACL (Access Control List)
- the file is protected by GUARDS (General Usable Access contRol
aDministration System).
(&00): command name
(&01): file name.
SCP0930
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0930 WARNING: PRINTER TYPE '(&00)' SPECIFIED IN SPOOL PARAMETER FILE, BUT CORRESPONDING '(&01)' NOT AVAILABLE. PROCESSING CONTINUES
Meaning
(&00): HP / LP (device type of the printer)
(&01): PRFILE .
Response
Contact the system support staff
SCP0932
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0932 NO JOB CORRESPONDS TO SPECIFIED OPERAND VALUES. COMMAND NOT PROCESSED
SCP0933
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0933 'SELECT' AND 'EXCEPT' LISTS FOR OPERAND '(&00)' CONTAIN IDENTICAL VALUES. COMMAND REJECTED
Meaning
The /SHOW-PRINT-JOB-STATUS command specifies the jobs with a given
operand (&00) which either are to be displayed (SELECT) or must not
be displayed (EXCEPT).
SCP0934
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0934 'EXCEPT' VALUES FOR OPERAND '(&00)' EXCLUDE ALL 'SELECT' VALUES. COMMAND NOT PROCESSED
Meaning
The wildcard model specified in the EXCEPT list for operand (&00)
includes all the values in the corresponding SELECT list.
SCP0935
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0935 WRONG USER ID'S SPECIFICATION
Meaning
- Specification of one or several user id's restricted to
SPOOL administrator or RSO administrator
- Specification of one or several user id's not belonging
to home host restricted to cluster administrator
- Specification of '*OWN' user id not allowed for console
task
SCP0936
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0936 DEVICE '(&00)' NOT MANAGED BY CALLER. COMMAND REJECTED
SCP0938
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0938 SPECIFIED PLAM LIBRARY (&01) NOT AVAILABLE. DMS ERROR CODE '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
For more detailed information about DMS error code (&00) enter command
/HELP-MSG in system mode or see the BS2000 manual 'System Messages'.
(&01) : library name.
SCP0939
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0939 SPECIFIED FILE NOT A PLAM LIBRARY. COMMAND REJECTED
SCP0940
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0940 SYNTAX ERROR IN ELEMENT TYPE SPECIFICATION. COMMAND REJECTED
Meaning
Maximum length permitted for element type specification
- without wildcards: 1 character
- with wildcards : 12 characters.
SCP0941
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0941 ELEMENT NAME CONTAINS A SYNTAX ERROR. COMMAND REJECTED
Meaning
The element name does not conform to the naming conventions.
Correct syntax for element names:
- fully qualified file name up to 38 characters (without catalog ID,
user ID and generation version) or
- fully qualified file name up to 80 characters with wildcards (without
catalog ID, user ID and generation version).
SCP0942
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0942 SYNTAX ERROR IN SPECIFICATION OF ELEMENT VERSION. COMMAND REJECTED
Meaning
Maximum length permitted for (alphanumeric) element version specification
- without wildcards: 24 characters
- with wildcards : 40 characters.
SCP0943
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0943 NO ELEMENT MATCHES THE SPECIFIED OPERAND VALUES. COMMAND NOT PROCESSED
SCP0944
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : YES
SCP0944 DEVICE '(&00)' DOES NOT BELONG TO ANY POOL IN THE SPOOL.PARAMETERS FILE. COMMAND REJECTED
Meaning
No pool is assigned to the printer (&00) in the SPOOL.PARAMETERS file.
Response
Printer (&00) must be activated with the operand DEST=*NONE of the
/START-PRINTER-OUTPUT command.
SCP0945
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0945 SPECIFIED ELEMENT '(&00)' NOT FOUND IN PLAM LIBRARY. COMMAND REJECTED FOR THIS ELEMENT
SCP0946
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0946 SYNTAX ERROR IN 'WILDCARDS' NOTATION '(&00)'. COMMAND REJECTED
Meaning
A syntactical error has been detected in the wildcard notation
of operand (&00).
SCP0947
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0947 (&00) JOBS FOUND WITH (&01) PAM PAGES. COMMAND TERMINATED
Meaning
(&00): number of jobs corresponding to the selection parameters
(&01): number of PAM pages allocated for these jobs.
SCP0948
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0948 SPECIFIED FORM NOT DEFINED FOR PRESENTLY SUPPORTED DEVICE TYPES
Meaning
The form specified in the /PRINT-FILE command or in the PRNT macro
for the FORM-NAME or FORM operand is only defined for old
device types, which are not supported any more in the present version.
Response
Contact the system support staff
SCP0949
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0949 INVALID DEVICE TYPE OF PRINTER '(&00)' IN SPOOL.PARAMETERS FILE. COMMAND TERMINATED
Meaning
(&00): device name.
Response
Correct the SPOOL.PARAMETERS file with the /MODIFY-SPOOL-DEVICE command.
SCP0950
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0950 A DEVICE ADMINISTRATOR IS NOT ALLOWED TO DISPLAY ALL USERS, EXCEPT FOR HIS OWN DEVICES. COMMAND TERMINATED
Meaning
A device administrator has given a /SHOW-SPOOL-JOB-STATUS command with
USER-IDENTIFICATION=*ALL and DESTINATION=*DEVICES(*ALL).
The device administrator can only obtain information
- about his own jobs on all devices,
- about all jobs on his own devices.
SCP0951
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : YES
SCP0951 'FORM-NAME' OPERAND '(&00)' NOT PERMITTED FOR PRINTER '(&01)'. COMMAND REJECTED
Meaning
The specified value for the FORM-NAME operand
- does not match any form in the SPOOL parameter file or
- has not been defined as a form for the specified printer.
Response
For detailed information about the forms or printers defined in the
SPOOL.PARAMETERS file enter the /SHOW-SPOOL-FORMS or /SHOW-SPOOL-DEVICE
command and correct the FORM-NAME operand using this information.
SCP0952
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0952 '(&00)' NOT SUPPORTED IN THIS SPOOL VERSION. COMMAND REJECTED
Meaning
Support for card equipment and for PUNCH on tapes has
been withdrawn as of SPOOL V2.5, and
support for pooler tapes has been withdrawn as of SPOOL V2.7.
SCP0953
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
SCP0953 POOL NAME '(&00)' NOT DEFINED IN THE SPOOL.PARAMETERS FILE. COMMAND REJECTED
Meaning
In the /PRINT-FILE or /PRINT-DOCUMENT command, the
DESTINATION/PRINTER-NAME can be either a
device name or a pool name defined in the SPOOL.PARAMETERS file.
In the /START-PRINTER-OUTPUT command, the DESTINATION name must be
a pool name defined in the SPOOL.PARAMETERS file.
SCP0954
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
SCP0954 WARNING: MORE THAN 100 POOLS ASSIGNED TO DEVICE '(&00)'. ONLY THE FIRST 100 POOLS ARE ACTIVATED
Meaning
Device (&00) belongs to more than 100 pools in the SPOOL.PARAMETERS file
and only the first 100 are activated via the /START-PRINTER-OUTPUT
command.
SCP0955
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
SCP0955 DEVICE '(&00)' DOES NOT BELONG TO ANY POOL IN THE SPOOL.PARAMETERS FILE. COMMAND REJECTED
Meaning
No pool is assigned to the device (&00) in the SPOOL.PARAMETERS file.
Response
Activate the device with the operand DEST=*NONE of the
/START-PRINTER-OUTPUT command.
SCP0956
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
SCP0956 TOO MANY VALUES SPECIFIED IN 'DESTINATION' OPERAND. COMMAND REJECTED FOR DEVICE '(&00)'
Meaning
A maximum of 100 pools can be activated for one device.
The /START-PRINTER-OUTPUT command is rejected.
Response
- Specify fewer values and/or
- remove the required number of values before adding new ones.
SCP0957
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : YES
SCP0957 'DESTINATION' NAME '(&00)' INVALID FOR DEVICE '(&01)'. COMMAND REJECTED
Meaning
Possible reasons:
- device (&01) does not belong to the pool in the SPOOL.PARAMETERS file;
- pool (&00) does not exist in the SPOOL.PARAMETERS file.
The /START-PRINTER-OUTPUT command is rejected for device (&01).
SCP0958
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0958 DEVICE RECORD IN THE SPOOL.PARAMETERS FILE MANDATORY FOR PRINTER '(&00)'. COMMAND REJECTED
Meaning
SPOOL device corresponding to the DPRINT device '(&00)'
cannot be found in the SPOOL PARAMETER file
Response
Add the device to the SPOOL.PARAMETERS file by means of the
//ADD-SPOOL-DEVICE statement of SPSERVE.
or in case of shared printer, check that DPRINTSV subsystem
is loaded
SCP0959
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0959 JV '(&00)' IS A TEMPORARY ONE OR THE CATID OF THE JV IS NOT ACCESSIBLE. COMMAND REJECTED
Meaning
Possible causes :
- The job variable is temporary
- the job variable is located on an inaccessible catalog ID.
(&00): job variable name.
SCP0960
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0960 PRINTER TYPE '(&00)' IMPLICITLY REQUESTED BY THE '(&01)' OPERAND AND SUCH A DEVICE IS NOT PRESENT IN THE CONFIGURATION. COMMAND REJECTED
Meaning
A specific printer type is implicitly requested by an operand but
such a device is not present in the configuration.
(&00): printer type
(&01): specific operand
SCP0961
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0961 INVALID VALUE IN OPERAND '(&00)'. COMMAND REJECTED
Meaning
(&00): USER IDENTIFICATION / ACCOUNT / PASSWORD.
SCP0962
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0962 ILAM ERROR '(&00)' WHEN ACCESSING PLAM LIBRARY. COMMAND OR MACRO TERMINATED
Meaning
(&00): ILAM error code:
201: the library cannot be found by DMS
203: the file is empty or is not a PLAM library.
SCP0964
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0964 PLAM ERROR '(&01)' DURING '(&00)' MACRO ON PLAM LIBRARY. COMMAND REJECTED FOR '(&02)' ELEMENT. IN SYSTEM MODE: /HELP-MSG PLA(&01)
Meaning
The PLAM library could not be properly accessed.
For more detailed information about the PLAM error code enter /HELP-MSG
in system mode or see the BS2000 manual 'System Messages'.
(&00): macro name
(&01): PLAM error code
(&02): element name.
Response
If problems persist when using this PLAM library, contact the system
support staff.
SCP0966
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0966 'TWO-UP-PROCESSING' OPERAND NOT ALLOWED FOR PRINTER '(&00)'. COMMAND REJECTED
Meaning
The TWO-UP-PROCESSING operand is only available for the HP90 printer.
(&00): (mnemonic) device name.
SCP0967
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0967 PRINTER '(&00)' CAN ONLY BE MANAGED WITH THE LOGICAL NAME '(&01)'. COMMAND REJECTED
Meaning
Printer (&01) was specified in the /START-PRINTER-OUTPUT command.
Any further /START-PRINTER-OUTPUT, /STOP-PRINTER-OUTPUT,
/MODIFY-PRINTER-OUTPUT-STATUS command must include the same name.
(&00): (mnemonic) device name specified in the command
(&01): (mnemonic) device name specified in the previous
/START-PRINTER-OUTPUT command.
Response
Correct the command and try again.
SCP0968
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0968 SPOOL JOB '(&00)' HAS BEEN PUT IN 'KEEP' BY AN EXCAT COMMAND AND CANNOT BE RESUMED. COMMAND REJECTED
Meaning
The /FORCE-CATALOG-EXPORT command has caused the pubset required for
processing the spool job (&00) to be exported, thus placing the spool job
in the KEEP state.
The /RESUME-PRINT-JOB command is rejected.
Response
Import the relevant subset by means of the /IMPORT-PUBLIC-VOLUME-SET
command.
SCP0969
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0969 LOCAL DEVICE NAME '(&00)' NOT ALLOWED IN THE SPECIFIED DESTINATION. COMMAND REJECTED
Meaning
A local printer name has been specified in the DESTINATION or DEVICE or
PRINTER-NAME operand of
the /PRINT-FILE or /PRINT-DOCUMENT command.
SCP0970
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0970 FORM '(&00)' OR POOL '(&01)' DEFINITION NOT COMPATIBLE WITH OPERAND '(&02)'. PRINT REQUEST REJECTED
Meaning
The definition of the FORM or POOL operand in the SPOOL.PARAMETERS file
is incompatible with operand (&02).
(&00): logical name (FORM-NAME) assigned to the form
(&01): logical name (POOL-NAME) assigned to the pool.
SCP0971
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0971 WARNING : ORIGINAL FILE CHARACTERISTICS OF THE ELEMENT '(&01)' FROM LIBRARY '(&02)' ARE NOT ACCESSIBLE. PRINT PROCESSING CONTINUES
Meaning
The record-class 164 containing the original file characteristics
of the element (&01) of the PLAM-library (&02) is not accessible
or not present (ELEMENT-ATTR=(SOURCE-ATTR=KEEP) option not used while
creating the library element).
As the PRINT-FILE command has been issued with one of the following
parameters (FILE-PART=SECTION/DELETE-FILE=YES/DELETE-FILE=DESTROY/
LAYOUT-CONTROL=(CONTROL-CHARACTERS=PHYSICAL)/
LAYOUT-CONTROL=(CONTROL-CHARACTERS=APA)), the print processing
continues without taking the file characteristics into account
but in this case, the resulting output can be different from the
expected one.
The DELETE-FILE=YES/DESTROY option is reset if it has been specified
in order to allow the user to enter a PRINT-FILE command again.
Response
If the resulting output is not the expected one, modify the
PRINT-FILE parameters or introduce the element in the library
again using the ELEMENT-ATTR=(SOURCE-ATTR=KEEP) option.
SCP0972
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0972 ACCESS PROTECTION FOR FILE '(&00)'. ACCESS REJECTED
Meaning
The access to the file (&00) is protected, file cannot be printed.
SCP0973
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0973 ILLEGAL COMBINATION OF OPERANDS. COMMAND REJECTED
Meaning
The operand syntax is correct. However, the operands combination
is not allowed.
Response
Correct the command and try again.
SCP0974
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0974 SYSTEM INTERFACE ERROR. CONTACT SYSTEM SUPPORT STAFF
Meaning
A problem occurred during command processing.
Response
Refer to the previous error messages sent to SYSOUT and contact
the system support staff.
SCP0975
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0975 USER NOT AUTHORIZED TO QUERY INFORMATION. COMMAND REJECTED
Meaning
The caller does not have the privilege to obtain the information or to
issue the command.
SCP0976
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0976 LOGICAL VALIDATION PROBLEM DURING COMMAND PROCESSING
Meaning
Possible cause:
- missing definition in the SPOOL parameters or in the SPOOL files
- DMS error (except system error) occurred
- device not available.
- Access to distributed printer while Dprint is not loaded
or partially loaded (Dprintsv or Dprintcl not loaded
- a system printer has been selected as device name
SCP0988
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0988 ERASE OPTION IGNORED WHEN PRINTING SEVERAL PLAM ELEMENTS WITH 'FILE-PART=SECTION'. PROCESSING CONTINUES
Meaning
Printing several elements with the DELETE-FILE=YES/DESTROY option
requires the FAMILY-PROCESSING=YES operand, which must not be used
together with the FILE-PART=SECTION operand.
The erase option is therefore ignored and the FAMILY-PROCESSING operand
has no significance for further processing.
SCP0989
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0989 INVALID 'LEVEL' VALUE IN THE 'TRACE' OPERAND. COMMAND REJECTED
Meaning
The LEVEL value given in the /START-PRINTER-OUTPUT
or /MODIFY-PRINTER-OUTPUT-STATUS command is not
correct or was not given together with the TRACE=YES operand.
SCP0990
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0990 'TRACE' OPERAND NOT ALLOWED FOR DEVICE '(&00)'. COMMAND REJECTED
Meaning
The TRACE operand is restricted to RSO and APA device types.
(&00): device name.
SCP0991
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0991 '(&00)' OPERAND NOT ALLOWED FOR APA PRINTER '(&01)'. COMMAND REJECTED
Meaning
The operand is not supported by the APA printer.
Response
Delete the operand and retry the command.
SCP0992
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0992 SPS SUBSYSTEM NOT LOADED. COMMAND REJECTED
SCP0993
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0993 INVALID ISAM KEY POSITION IN FILE '(&00)' WITH APA CONTROL MODE
Meaning
In case of a /PRINT-FILE or /PRINT-DOCUMENT command with APA control mode,
the ISAM key of the file to be printed must be in position 1
(for files with RECFORM=F) or position 5 (for files with RECFORM=V).
SCP0994
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP0994 Subscription for notification has been successfully registered with identification '(&00)'
Meaning
You specified a notification request in your print command
It has been registered in the Notification Service with
the identification (&00). You can view it by using the
Notification Service manager
SCP0995
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0995 JVS ERROR CODE '(&00)' ON SPOOL MONJV '(&01)' FOR TSN '(&02)'. COMMAND REJECTED FOR FILE '(&03)'. IN SYSTEM MODE: /HELP-MSG JVS(&00)
Meaning
For more detailed information about the JVS error code, enter /HELP-MSG
JVS(&00)
in system mode or refer to the BS2000 manual 'System messages' or 'Job
Variable'
(&00): JVS error code
(&01): MONJV name
(&02): job TSN
(&03): filename
SCP0996
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0996 'JV' SUBSYSTEM NOT AVAILABLE OR NOT LOADED. COMMAND REJECTED FOR FILE '(&00)'
Meaning
(&00): file to be printed
SCP0997
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP0997 JV '(&00)' ALREADY IN USE OR CORRUPTED. COMMAND REJECTED FOR FILE '(&01)'
Meaning
Possible causes:
- the JV has already been assigned to another SPOOL job
- the JV is a monitoring JV (MONJV)
- the JV status has been altered.
(&00): JV name
(&01): file name.
SCP0998
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0998 'MONJV=*STD' NOT ALLOWED WITH TEMPORARY OR GENERATION FILE TO BE PRINTED. COMMAND REJECTED FOR FILE '(&00)'
Meaning
The MONJV=*STD option may not be used when the file to be printed is a
temporary file or a file generation.
SCP0999
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP0999 '(&00)' REQUESTED IS NOT SUPPORTED ON THE '(&01)' PRINTER TYPE
Meaning
The (&01) printer type available in the configuration does not support
the requested function (&00).
(&00): character set number / form overlay / rotation
(&01): printer type.
SCP1000
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1000 JVS ERROR ON '(&00)' MONITORING JV. PROCESSING CONTINUES FOR FILE '(&01)' WITHOUT JV MONITORING
Meaning
An error has been found in the monitoring JV (MONJV) during
SYSLST/SYSOUT processing.
The /PRINT-FILE job continues without JV monitoring.
(&00): MONJV name
(&01): file name.
SCP1001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1001 THE USER ID OF THE JOB VARIABLE '(&00)' DOES NOT EXIST. COMMAND REJECTED
Meaning
(&00) : job variable name.
Response
None.
SCP1002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1002 THE USER PARAMETER FILE '(&00)' IS NOT USABLE BECAUSE IT IS A TEMPORARY ONE
Meaning
- (&00): user parameter file name.
Response
None.
SCP1003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1003 ERROR IN THE CHANNEL TYPE DEFINITION FOR THE PRINTER '(&00)'. THE COMMAND IS REJECTED
Meaning
A difference has been detected between the channel type value
defined in the SPOOL PARAMETERS file and the UGEN definition for
the printer (&00).
Response
Correct the channel type of printer definition in the SPOOL
PARAMETERS file and retry the command.
SCP1004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1004 DELETE-FILE=YES/DESTROY IS SUPPRESSED FOR PLAM LIBRARY ELEMENT '(&00)', TYPE '(&01)' BECAUSE PLAM RETURN CODE '(&02)'./HELP-MSG PLA(&02). PROCESSING CONTINUES
Meaning
(&00) : PLAM library element name.
(&01) : PLAM library element type.
(&02) : PLAM return code.
command macro
/PRINT-FILE PRNT
Response
None
SCP1005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1005 DISPLAY HAS BEEN INTERRUPTED. COMMAND TERMINATED
Meaning
The display of the information is interrupted for one
of the following reasons :
- the user has interrupt the display with help of the
K2-function key.
- the connexion line has been broken during transfer
of information.
- OUTPUT=SYSLST has been specified and SYSFILE management
has returned an error.
SCP1006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1006 MIGRATED FILE '(&00)' CANNOT BE RECALLED. COMMAND REJECTED
Meaning
The file (&00) has been migrated to the S1 or S2 storage level.
The recall issued by the print processing does not succeed.
The spoolout request is rejected for this file.
SCP1007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1007 ACCESS TO S1/S2 STORAGE LEVEL. PLEASE WAIT
Meaning
The current file has been migrated to the S1 or S2 storage level.
The recall of the migrated data may take some time.
Please wait.
SCP1008
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1008 '(&00)' SUBSYSTEM NOT LOADED ON '(&01)' SERVER. DISTRIBUTED PRINTER '(&02)' MAY NOT BE STARTED. COMMAND REJECTED
Meaning
(&00) : Subsystem name
(&01) : Server name
(&02) : Printer name
The distributed printer is linked to a server in the dprint configuration
file; To process distributed jobs, the DPRINTSV subsystem of this server
must be loaded.
SCP1009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1009 LOCAL PRINTER NAME OF '(&00)' DISTRIBUTED PRINTER HAS AN RSO PRINTER TYPE. COMMAND REJECTED
Meaning
(&00) : printer name
Only local spool printers may be started as distributed printers.
Response
Update the Dprint configuration file or modify the SPOOL parameters file.
SCP1010
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1010 PRINTER '(&00)' DOES NOT BELONG TO ANY PRINTER POOL. COMMAND REJECTED
Meaning
No printer pool is assigned to the printer (&00) in the configuration file
Response
Printer must be started with operand DESTINATION = *NONE
SCP1011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1011 THE SPECIFIED DEVICE LIST MUST BE HOMOGENOUS. COMMAND IS REJECTED FOR DEVICE '(&00)'
Meaning
The specified device list must contain either all local devices or all
remote printers or all distributed printers.
Response
RESPONSE : NONE
SCP1020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1020 Print job cannot be processed by a remote cluster for reason '(&00)'. Command terminated
Meaning
Some characteristics of the file or the job imply it cannot
be scheduled by another cluster than the home one:
01 : - FAMILY=*YES has been specified in the command or is
implicit due to the print default of the spool
parameters
- temporarily file addressed to a SINIX cluster
02 : - request for intercluster with Dprint version
lower than 1.1A and one of the following operand
has been given:
DELETE-AFTER-PRINT=*YES or *DESTROY
PRINT-DOCUMENT *SYSOUT or *SYSLST
LOCK=*YES or LOCK=*STD and the spool parameter
LOCK-DEFAULT=YES
03 : - file is an EAM or an UFS
Response
Enter the command again with a local destination
SCP1021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1021 JOB MUST BE SCHEDULED BY A DISTRIBUTED PRINTER. COMMAND REJECTED
Meaning
The default DPRINT-DESTINATION in the spool parameters of the remote
cluster does not allow to process the job.
Only distributed printers may process jobs coming from remote clusters
SCP1022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1022 SYSTEM ERROR. COMMAND REJECTED
Meaning
An error has been detected by an internal interface. A record is stored in
SERSLOG file
Response
Contact system support staff and ask for debugging
SCP1023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1023 INCOMPATIBILITY BETWEEN CLIENT AND SERVER FORM DEFINITIONS. COMMAND REJECTED
Meaning
The form does not exist in the spool parameters of the
server or is not equivalent to the form of
client spool parameters; the printer-type, page-size, line-size,
band-id, pcl# and character-image fields must be the same
SCP1024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1024 NO SERVER ABLE TO PROCESS THE COMMAND
Meaning
None of the currently accessible servers can process the job
or the request
Possible reasons :
- no printer able to process the print job
- required servers are not accessible (not active,
access not allowed, temporary network problems,...
SCP1025
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1025 PRINT JOB ACCEPTED BY SERVER '(&00)' WITH TSN '(&01)'
Meaning
(&00) : server name
(&01) : tsn on server host
SCP1026
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1026 PRINT JOB ACCEPTED BY REMOTE CLUSTER '(&00)' WITH TSN '(&01)'
Meaning
(&00) : remote cluster name
(&01) : tsn on server host
SCP1027
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1027 PRINT JOB ACCEPTED BY REMOTE CLUSTER '(&00)' WITH JOB-ID '(&01)'
Meaning
(&00) : remote cluster name (not a BS2000 remote cluster)
(&01) : job identification in the remote cluster
SCP1028
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1028 ACCESS TO DPRINT SERVER '(&00)' REJECTED. REASON : '(&01)'
Meaning
(&00) : server-name
(&01) : reason : 01 : server not defined in dprint
configuration
02 : version of the corresponding
DPRINTSV subsystem not supported
03 : server not attached in the
configuration
04 : communication problems
05 : DPRINTSV subsystem not loaded
06 : server not defined or access to server denied
SCP1029
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1029 ACCESS TO REMOTE CLUSTER '(&00)' REJECTED. REASON : '(&01)'
Meaning
(&00) : remote-cluster name
(&01) : reason : 01 : remote cluster not defined in the dprint
configuration file
configuration file
02 : version of DPRINTCL not supported on cluster
gateway
03 : communication problems
04 : DPRINTSV subsystem not loaded
SCP1030
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1030 JVS ERROR '(&00)' ON SPOOL MONITORING JOB VARIABLE '(&01)'. IN SYSTEM MODE : /HELP-MSG JVS(&00)
Meaning
An internal call to access SPOOL monitoring job variable (&00) was not
successful.
Response
To obtain more information : /HELP-MSG JVS(&00)
SCP1031
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1031 COMMAND PROCESSED BY SERVER '(&00)'
Meaning
The command /MODIFY-PRINT-JOB-ATTRIBUTES has been successfully processed
by the server (&00) or
the /CANCEL-PRINT-JOB has been successfully initiated on the server (&00)
Response
RESPONSE : NONE
SCP1032
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1032 COMMAND PROCESSED BY REMOTE CLUSTER (&00)
Meaning
The /MODIFY-PRINT-JOB-ATTRIBUTES command has been
successfully processed by the remote cluster (&00) or
the /CANCEL-PRINT-JOB command has been successfully
initiated on the remote cluster (&00).
Response
RESPONSE : NONE
SCP1033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1033 NO SERVER ABLE TO PROCESS THE PRINT JOB REQUESTED MODIFICATIONS. COMMAND REJECTED
Meaning
The requested modifications of the print job cannot be supported by any
server. The job is unchanged
Response
RESPONSE : NONE
SCP1034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1034 OPERATOR RESPONSE MISSING FOR TSN '(&00)'. COMMAND DEFERRED UNTIL RESPONSE IS GIVEN
Meaning
- (&00) : TSN
- Concerned command are /CANCEL-JOB or
/CANCEL-PRINT-JOB
- The job with TSN (&00) is currently in process and its
processing requires a reply from operator. The command
will be processed as soon as the reply has been given
SCP1035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1035 /MODIFY-PRINT-JOB-ATTRIBUTES COMMAND NOT ALLOWED FOR THIS PRINT JOB. COMMAND REJECTED
Meaning
This job has been created with a SPOOL version anterior to the SPOOL
version 3.0; all modifications of attributes except the priority are
rejected
Response
RESPONSE : NONE
SCP1036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1036 LOCK ERROR ON PRINT JOB. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
An internal error occurred during the redirection of a print
job. The job cannot be locked because it
is currently involved in a simultaneous operation
Response
Retry the command later
SCP1037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1037 INTERNAL ERROR DURING SPOOL PARAMETERS OR CONFIGURATION ACCESS. COMMAND REJECTED
Meaning
MEANING : NO FURTHER INFORMATION
Response
RESPONSE : NONE
SCP1038
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1038 CLASS '(&00)' MEMORY REQUEST ERROR. COMMAND REJECTED
Meaning
(&00) : MEMORY CLASS
Response
RESPONSE : NONE
SCP1039
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1039 REDIRECTION FROM '(&00)' TO '(&01)' NOT ACCEPTED. COMMAND NOT PROCESSED FOR TSN '(&02)'
Meaning
The redirection is not processed for the specified TSN or for each
remaining TSN((&02)=*ALL).
Possible reasons :
- the origin and destination specified in the command are not compatible
- the specified mode of redirection is not supported
(&00) : origin printer name or printer pool name
(&01) : destination printer name, printer pool name or *CENTRAL
(&02) : TSN
Response
SCP1040
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1040 '(&00)' NOT DEFINED IN THE CONFIGURATION FILES. COMMAND REJECTED
Meaning
(&00) : printer name or printer pool name
Possible reasons :
- the pool name or the printer name is not defined in the SPOOL parameters
file
or in Dprint configuration
Response
SCP1041
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1041 REDIRECTION NOT ALLOWED. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
The redirection is not processed for the specified TSN or for all
remaining TSN. In this case (&00) = *ALL.
- the user is not authorized to redirect the specified TSN
- a print job submitted with a variable URL has been selected
Response
SCP1042
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1042 EQUISAMQ FILE ACCESS ERROR. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
The redirection is not processed for the specified TSN or for all
remaining TSN. In this case (&00) = *ALL.
Reason : an error occurred during EQUISAMQ file access
Response
SCP1043
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1043 SLOT MANAGER ACCESS ERROR. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
The redirection is not processed for the specified TSN or for all
remaining TSN. In this case (&00) = *ALL.
Reason : an error has been reported by the slot manager
Response
SCP1044
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1044 PRINT JOB WITH TSN '(&00)' NOT FOUND
Meaning
MEANING : NO FURTHER INFORMATION
Response
RESPONSE : NONE
SCP1045
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1045 PRINT JOB WITH TSN '(&00)' CANNOT BE RESUMED. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
The redirection is not processed for the specified TSN of for all
remaining TSN. In this case (&00) = *ALL.
Reason : the job has been previously held by a
/EXPORT-PUBLIC-VOLUME-SET command.
Response
An /IMPORT-PUBLIC-VOLUME-SET command must be done to put the job in wait
state
SCP1046
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1046 '(&00)' PRINT REQUEST(S) REDIRECTED TO '(&01)'
Meaning
(&00) : number of redirected print jobs
(&01) : printer name, printer name or *CENTRAL
SCP1047
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1047 NO PRINT JOB FOR '(&00)'. COMMAND REJECTED
Meaning
There is no job addressed to (&00) satisfying the selection criteria
(&00) : origin printer name or printer pool name
Response
RESPONSE : NONE
SCP1048
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1048 INVALID PRINT-FILE OPERAND '(&00)'. COMMAND NOT PROCESSED FOR TSN '(&01)'
Meaning
The operand specified in the original PRINT-FILE command is not compatible
with the requested destination
(&00) : PRINT-FILE operand name
(&01) : TSN
Response
RESPONSE : NONE
SCP1049
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1049 RSO SUBSYSTEM NOT LOADED. COMMAND REJECTED
Meaning
Origin or destination is RSO printer name or printer pool name and RSO
subsystem is not loaded. Any redirection is rejected
Response
Start RSO subsystem
SCP1050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1050 OPERAND '(&00)' RESTRICTED TO CLUSTER ADMINISTRATOR. COMMAND REJECTED
Meaning
MEANING : NO FURTHER INFORMATION
Response
RESPONSE : NONE
SCP1051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1051 OPERAND '(&00)' MAY ONLY BE USED WITH '(&01)' SUBSYSTEM. COMMAND REJECTED
Meaning
The operand (&00) is DPRINT specific and may only be used when the (&01)
subsystem is loaded
(&00) : operand name
(&01) : DPRINTCL, DPRINTCM or DPRINTSV
Response
Contact system support staff for more information
SCP1052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1052 WARNING : INFORMATION MAY BE NOT COMPLETE. ONE OR SEVERAL SERVERS ARE NOT ACCESSIBLE
Meaning
The display information may be not complete because some servers were
- communication problems
- DPRINT subsystems not loaded on the server
Response
For more information, contact cluster administrator
SCP1053
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1053 SYSTEM ERROR. PROCESSING ABORTED
Meaning
The processing of the command has been aborted by an internal error
Response
Retry the command and contact the system support staff if error occurs
again
SCP1054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1054 CONFLICT BETWEEN '(&00)' AND '(&01)' OPERANDS. COMMAND REJECTED
Meaning
Operands (&00) and (&01) cannot be used simultaneously
Response
Correct the command and retry
SCP1055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1055 WARNING. CLASS '(&00)' MEMORY RELEASE ERROR
Meaning
(&00) : memory class
SCP1056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1056 WARNING. UNLOCK OF FILE '(&00)' FAILED. PLEASE CONTACT SYSTEM SUPPORT STAFF
Meaning
NO FURTHER INFORMATION
SCP1057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1057 THE NEW VALUE FOR REPEAT PARAMETER IS LESS THAN THE NUMBER OF ALREADY PRINTED EXEMPLARS. COMMAND REJECTED
Meaning
NO FURTHER INFORMATION
SCP1058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1058 WARNING. OPTION DELETE FILE IS NOT ALLOWED WITH THE FILE '(&00)'. OPTION IGNORED
Meaning
A request to erase file (&00) is rejected due to the possible following
reasons
- The file belongs to a different user ID;
- The file has access protection at access control list level;
- The file is a file generation;
- The file can only be accessed in read mode;
- The file is protected by a write password;
SCP1059
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
SCP1059 ERROR '(&00)' FROM INTERFACE '(&01)'
Meaning
NO FURTHER INFORMATION
SCP1061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1061 WARNING. ACCESS TO SERVER '(&00)' REJECTED. REASON : '(&01)'. PROCESSING CONTINUES
Meaning
(&00) : server name
(&01) : reason : 01 : server not defined in DPRINT
configuration
02 : version of the corresponding
DPRINTSV not supported
03 : server not attached in the
configuration
04 : communication problem
05 : DPRINTSV subsystem not loaded
06 : server not defined or access to server denied
SCP1062
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1062 '(&00)' SUBSYSTEM NOT LOADED OR NOT READY. COMMAND REJECTED
Meaning
An operand relevant only for DPRINT has been specified
(&00) : subsystem name
SCP1063
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP1063 ERROR '(&00)' FROM INTERFACE '(&01)'
Meaning
(&00) : Return code interface standard header
(&01) : System or internal interface name
SCP1064
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1064 SYSTEM INTERFACE ERROR. COMMAND REJECTED. CONTACT SYSTEM SUPPORT STAFF
Meaning
An error occurred in a system interface
SCP1066
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1066 PRINTER '(&00)' MAY ONLY BE MANAGED BY CLUSTER ADMINISTRATOR OR SPOOL ADMINISTRATOR. COMMAND REJECTED
SCP1067
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1067 '(&00)' OPERAND IS ONLY ALLOWED FOR DISTRIBUTED PRINTERS. COMMAND REJECTED
Meaning
(&00) : operand name
Host name operand may be specified only for a printer
defined in the configuration file
SCP1068
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1068 JOB WITH TSN '(&00)' IS LOCKED. RETRY COMMAND LATER
Meaning
NO FURTHER INFORMATION
SCP1069
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1069 FILE '(&00)' WILL BE REPRINTED FROM BEGINNING
Meaning
The job has been interrupted during its spoolout.
Due to modifications of parameters influencing the
output format, the file will be reprinted from
beginning
SCP1070
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1070 WARNING. JOB WITH TSN '(&00)' CANNOT BE UNLOCKED
Meaning
An error occurred during job unlock. The job will be
processed after SPOOL restart
SCP1071
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1071 DEVICE '(&00)' IS NOT STARTED. COMMAND REJECTED
Meaning
The command HOLD-PRINT-JOB is not presently possible
A device session must have been started for the specific
device by issuing one of the following commands :
- START-PRINTER-OUTPUT
- START-TAPE-OUTPUT
- START-DISKETTE-OUTPUT
SCP1072
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1072 JOB WITH TSN '(&00)' IS IN PREPROCESSING. RETRY COMMAND LATER
Meaning
(&00) : tsn
A job cannot be interrupted during its preprocessing
SCP1073
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1073 PRIORITY SPECIFIED IN COMMAND NOT PERMITTED FOR THIS USERID. COMMAND REJECTED
Meaning
Priority specified in /CHANGE-TASK-PRIORITY or
MODIFY-PRINT-JOB-ATTRIBUTES is not allowed
SCP1074
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1074 DEVICE '(&00)' DOES NOT BELONG TO RSO. COMMAND NOT PROCESSED FOR TSN '(&01)'
Meaning
(&00) : device name
(&01) : tsn or *ALL (all jobs concerned by the command)
SCP1075
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1075 PRINT REQUEST REJECTED BY SERVER '(&00)'. PROCESSING CONTINUES
Meaning
The print request submitted to server (&00) has been
rejected. The reasons of this rejection are
explained by the message following this one
SCP1076
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1076 WARNING. NO INFORMATION AVAILABLE FOR TSN '(&00)'. PROCESSING CONTINUES
Meaning
The job with TSN (&00) has been accepted and is
processed by a server, but an error occurs
while accessing the equisamq file or calling
the local spool task. The information about
this job is currently not available.
SCP1077
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1077 WARNING. FAMILY OF PRINT JOBS WITH TSN '(&00)' IS LOCKED. SCHEDULING IS POSTPONED
Meaning
EQUISAMQ file cannot be accessed properly.
No action is possible on this family till next SPOOL
startup
SCP1078
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1078 WARNING. '(&00)' ERROR AFTER JOB HAS BEEN ACCEPTED
Meaning
(&00) = LOCK : the file has been locked by a wrong TSN,
it can remain locked after job termination
UNLOCK : if the job has been rejected and unlock
of the file has failed. The file remains
locked
if the job has been accepted, the file
can remain locked after job termination
Response
Call system support staff
SCP1079
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1079 PRINTER POOL '(&00)' SPECIFIED AS DEFAULT DESTINATION IN THE SPOOL PARAMETERS FILE DOES NOT EXIST IN THE CONFIGURATION FILE. COMMAND REJECTED
Response
Call SPOOL administrator
SCP1080
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1080 ERROR DETECTED DURING JOB VALIDATION. COMMAND NOT PROCESSED FOR TSN '(&00)'
Meaning
(&00) : Print job TSN
An error occurred during the print job revalidation
the redirection is not processed for this job
SCP1081
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1081 '(&00)' JOB(S) FOUND. COMMAND TERMINATED
Meaning
(&00) : Number of jobs corresponding to the selection
parameters
SCP1082
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1082 REQUESTED OPERAND IN COMMAND RESERVED FOR THE SPOOL ADMINISTRATOR. COMMAND REJECTED
Meaning
The user requested
- a function reserved for the console operator or the print
service administrator
- information on an user ID other than his own.
SCP1083
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1083 INVALID OPERAND IN COMMAND. COMMAND REJECTED
SCP1084
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
SCP1084 Incompatibility between file ccsname '(&01)' and '(&02)'. Command rejected for file/plam element '(&00)'.
Meaning
CCSNAME : Coded Character Set NAME
SCP1085
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1085 DSEM SUBSYSTEM NOT LOADED. COMMAND REJECTED
Meaning
Specific DSEM operand has been specified in PRINT-DOCUMENT command.
The command is rejected due to DSEM connection problems
SCP1086
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1086 INTERNAL ERROR '(&00)' DURING PROCESSING OF UFS FILE
Meaning
An internal error occurs when processing an UFS file by calling the POSIX
subsystem
(&00) : 01 malloc error 06 setgid() error
02 getcwd() error 07 privserv() error
03 access() error 08 stat() error
04 remove() error 09 pathname too long
05 bs2copy() error 10 strchr() error
SCP1087
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1087 POSIX, POSPRRTS OR NFS NOT LOADED OR NOT AVAILABLE
Meaning
POSIX or POSPRRTS subsystem is not loaded or not available.
Response
Please contact system support staff.
SCP1088
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1088 UNABLE TO ACCESS REQUESTED UFS FILE
Meaning
Possible reasons :
- the UFS file does not exist
- the privileges are too low to perform the requested access
- an error has been reported by POSIX subsystem
SCP1089
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1089 EXIT#094 MANDATORY FOR TSN '(&00)'. COMMAND REJECTED
Meaning
- EXIT#094 subsystem was started on the client host and not on
the server host
- OR EXIT#094 subsystem was not started on the client host but
was started on the server host
- a job altered by EXIT#094 is tried to be modified by a
/MODIFY-PRINT-JOB-ATTRIBUTES command while the EXIT#094 is
not started
SCP1090
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1090 JOB WITH TSN '(&00))' HAS BEEN REJECTED BY EXIT#094
Meaning
The subsystem EXIT#094 has returned an error code
The job is rejected by the current server
SCP1091
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1091 WARNING. ERROR DETECTED BY EXIT#094 FOR TSN '(&00)'. PROCESSING CONTINUES
Meaning
The subsystem EXIT#094 (function F1) has returned an error code
The processing of the job continues
SCP1092
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
SCP1092 DEVICE RECORD NOT DEFINED IN THE SPOOL PARAMETERS FILE OR DPRINTSV SUBSYSTEM NOT LOADED FOR PRINTER '(&00)'. COMMAND REJECTED
Response
Add the device to the SPOOL PARAMETERS file by means of the
//ADD-SPOOL-DEVICE statement of SPSERVE or
load the DPRINTSV subsystem where the printer is defined.
SCP1093
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1093 ILLEGAL VALUE FOR '(&00)' OPERAND. COMMAND REJECTED
Meaning
(&00) : operand name
The user is not allowed to specify this value for this operand.
SCP1094
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1094 DPRINTCL WARNING : SOME DPRINT PRINT-JOBS CANNOT BE DISPLAYED
Meaning
DPRINTCL subsystem is not started.
Response
Start DPRINTCL subsystem and retry
Please contact system support staff
SCP1095
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP1095 DPRINTSV WARNING : SOME DPRINT PRINT-JOBS CANNOT BE DISPLAYED
Meaning
DPRINTSV subsystem is not started.
Response
Start DPRINTSV subsystem and retry
Please contact system support staff
SCP1096
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1096 JOB IN ACTIVE STATE WHEN SERVER ACCESS FAILED HAS BEEN DEFERRED
Meaning
The command MODIFY-PRINT-JOB-ATTRIBUTES with the operand
JOB-IDENTIFICATION=*CLIENT-TSN() has been issued by the
cluster administrator. The job identified by the client
TSN and the host name was in active state and the server
which was processing it is no longer accessible. The job
is deferred.
Response
A MODIFY-PRINT-JOB-ATTRIBUTES with adequate DOCUMENT-PART
specification followed by a RESUME-PRINT-JOB can be used
to restart the job from the correct place. In any case
a CANCEL-PRINT-JOB can be issued to delete the job
SCP1097
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1097 INCONSISTENCY BETWEEN THE FORM-NAME AND THE FORM-OVERLAY PARAMETER FOR THE PRINTER '(&00)'. COMMAND REJECTED
Meaning
(&00) : printer name
A form specified in the FORM-NAME parameter is defined with a
default form-overlay in the SPOOL PARAMETER file and the
FORM-OVERLAY parameter specified in the command is in
contradiction with this implicit form-overlay.
Response
Modify the FORM-OVERLAY parameter in the command and retry it
SCP1098
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1098 WARNING. ACCESS TO HOST '(&00)' REJECTED. REASON : '(&01)'. PROCESSING CONTINUES
Meaning
(&00) : host name
(&01) : reason : 01 : host not defined in DPRINT
configuration
02 : version of the corresponding
DPRINTCM not supported
03 : host not attached in the
configuration
04 : communication problem
05 : DPRINTCM subsystem not loaded
06 : host not defined or access to host denied
SCP1099
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1099 ACCESS TO DPRINT HOST '(&00)' REJECTED. REASON : '(&01)'
Meaning
(&00) : host-name
(&01) : reason : 01 : host not defined in dprint
configuration
02 : version of the corresponding
DPRINTCM subsystem not supported
03 : host not attached in the
configuration
04 : communication problems
05 : DPRINTCM subsystem not loaded
06 : host not defined or access to host denied
SCP1100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1100 NO HOST ABLE TO PROCESS THE COMMAND
Meaning
None of the currently accessible hosts can process the request
SCP1101
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
SCP1101 TSN '(&00)' HAS BEEN DISTRIBUTED WITH TSN '(&03)' ON SERVER '(&01)' OF CLUSTER '(&02)'
Meaning
(&00) : client TSN
(&01) : server name
(&02) : cluster name
(&03) : server TSN
A print job has been accepted by a remote server of the local cluster
or a server of a remote cluster
SCP1102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1102 PRINT REQUEST REJECTED BY THE LOCAL SPOOL. PROCESSING TERMINATED
Meaning
The job cannot be processed by the local spool
SCP1103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1103 COMMAND PROCESSING ILLEGAL FOR TSN '(&00)'
Meaning
(&00) : TSN of the job
The user has requested information about/modification on a job
- issued in a previous SPOOL version
- issued with /WRITE-DISKETTE
or /WRITE-SPOOL-TAPE command
- addressed to RBP
SCP1104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1104 WARNING: PRIORITY VALUE NOT ALLOWED. SERVER PRIORITY HAS BEEN FORCED
Meaning
The priority value specified in the command is too low
according to the limit value defined for the selected
server. This limit value has been given to the print job
SCP1105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1105 VERSION NOT SUPPORTED BY PARTNER. COMMAND REJECTED.
Meaning
The version of the caller request is not recognized
by the partner because of interface incompatibilities.
SCP1106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1106 PRINT JOB WILL BE PROCESSED ON CLIENT HOST
Meaning
Either the print job will be processed
- by the local SPOOL of the client host
(in combination with SCP0894 message)
- or by the local server of the client host
(in combination with SCP0894 and SCP1025 messages)
SCP1107
Destination: CONSOLE Routing code: S Weight: 70
Warranty : NO
SCP1107 CANCEL PROCESSING OF PRINT JOB WITH TSN '(&00)' AND SERVER TSN '(&01)' INITIATED ON SERVER '(&02)' OF CLUSTER '(&03)'
Meaning
(&00) : client tsn for intra-cluster print job
tsn on the gateway host for inter-cluster print job
(&01) : server tsn
(&02) : server name
(&03) : cluster name
SCP1108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1108 PRINT JOB WITH CLIENT TSN '(&00)' AND SERVER TSN '(&01)'HAS BEEN REDIRECTED
Meaning
(&00) : client tsn
(&01) : server tsn
A print job with the specified server TSN has been removed from
the home server due to a MODIFY-PRINT-JOB-ATTRIBUTES command.
- either, it is processed by the same server but with a new TSN
- or it is no longer processed by the home server but is processed
by an other server
SCP1109
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1109 WARNING : USER ID ARE UNKNOWN BY THE LOCAL JOIN FILE. PROCESSING CONTINUES
Meaning
A userid of the list given in the /START-PRINTER-OUTPUT
or in the /MODIFY-PRINTER-OUTPUT is unknown in
the local join file
SCP1110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1110 WARNING : Internal error during filter existence check for tsn '(&00)'
Meaning
An error occurs during the analysis of print job filtering
possibilities. If there are possibilities for printing the
the job without filtering, the job is accepted, otherwise
the job is rejected
Response
Contact system support staff
SCP1111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1111 No printer able to process the command. Command rejected
Meaning
There is no printer able to print the job and there is
no filter able to convert the document into a format
printable by an existing printer
SCP1112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1112 PRM error '(&00)' when accessing file '(&01)'
Meaning
For more detailed information about the PRM error code
enter /HELT-MSG SPR0014 in system mode and refer to the
maincode information.
SCP1113
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1113 A print job processed by a remote cluster cannot be redirected to another cluster
Meaning
A job located on a remote cluster is addressed and a
redirection of this job to another remote cluster is
requested. This operation is forbidden.
SCP1114
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1114 Internal error occurred during the redirection to the remote cluster. Command rejected
Meaning
The processing preparing the print job to be addressed
to the remote heterogeneous cluster failed. The MODIFY-
PRINT-JOB-ATTRIBUTES command is rejected.
SCP1115
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1115 WARNING : update of the original print job failed. Reason '(&00)'. Command rejected
Meaning
The update of the original job which has been redirected
to a remote cluster failed. The reasons are :
(&00) = 01 : the Spool Control Block has not been
deleted from the EQUISAMQ file due to an
EQS error.
= 02 : slot manager error. The original job
remains present in jobs status displays
SCP1116
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1116 Output format name '(&00)' not supported. Command not processed for TSN '(&01)'
Meaning
The format name of the document is not supported by the
new target printer. The format name is not contained in
the list of the supported format names associated to the
printer in the Spool parameters device record
Response
- display the printer information by means of the command
/SHOW-SPOOL-DEVICE <target printer name>,INFO=*ALL and
extend eventually the list of the supported format names
by means of the SPSERVE statement //MODIFY-SPOOL-DEVICE
- repeat the REDIRECT-PRINT-JOB command by specifying a new
target printer
SCP1117
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1117 Command not supported in SR2000 environment
Meaning
The following commands are not supported in SR2000 environment :
START-DISKETTE-INPUT
START-DISKETTE-OUTPUT
MODIFY-DISKETTE-OUTPUT-STATUS
STOP-DISKETTE-INPUT
STOP-DISKETTE-OUTPUT
WRITE-DISKETTE
Response
Try to correct the DMS error and retry the startup
SCP1118
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1118 The modification of some parameters is not allowed for this print job. Command rejected
Meaning
The job is coming from a remote cluster (SINIX or PC environment).
For such jobs, it is not allowed to modify the parameters requiring
a revalidation of the print job which could lead to a redirection
of the print job. The only modifiable operands are :
PRINT-JOB-PRIORITY, PRINT-JOB-NAME, LEFT-MARGIN, RECORD-PART,
ADDITIONAL-COPIES, HEADER-EXIT-NUMBER, TRAILER-EXIT-NUMBER,
HEADER-PAGE-TEXT,OUTPUT-PART
SCP1119
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1119 Invalid operand value in SPOOL application program interface
Meaning
An operand specified in the SPOOL application program interface
is incorrect. The subcode 2 of the API return code indicates
the wrong operand. The concerned SPOOL application program
interfaces are STRSPPR, STPSPPR, SUPSPPR, SASDSPO.
Response
To obtain additional information about the API return code
please, refer to the manual SPOOL&PRINT Macros and Exits
SCP1120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1120 Job with TSN '(&00)' has been modified and redirected with TSN '(&03)' on server '(&01)' of cluster '(&02)'
Meaning
(&00) : client TSN
(&01) : server name
(&02) : cluster name
(&03) : server TSN
A print job has been modified and accepted by a remote server of the
local cluster or a server of a remote cluster
SCP1121
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1121 Invalid date or time operand specified. Command rejected
Meaning
the date and time specified in the command are invalid
they do not respect the format YYYY-MM-DD HH:MM
Response
Correct the operand and retry
SCP1122
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1122 Print job with TSN '(&00)' will be processed on client host
Meaning
Either the print job will be processed
- by the local SPOOL of the client host
or by the local server of the client host
SCP1123
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1123 IDOM subsystem not loaded. Command rejected
Meaning
It is currently not possible to start an IDOM virtual
device because IDOM subsystem is not started
SCP1124
Destination: USER-TASK Routing code: Weight:
Warranty : NO
SCP1124 '(&00)' devices found. Command terminated
Meaning
(&00): number of devices corresponding to the selection criterions
SCP9000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
SCP9000 COMMAND NOT ACCEPTED BY INTEROPERABILITY FILTERS. COMMAND REJECTED
Meaning
PRINT-DOCUMENT command has been rejected by the
interoperability filters.
Response
Call SPOOL administrator