SCM0001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0001   BS2000  STATIC SUBSYSTEM CATALOG MANAGER (SSCM) (&00) PAGE (&01)

Meaning

This message is used internally by SSCM for its information reporting.

SCM0002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0002   SAME 'SVC' OR 'SYSTEM-EXIT' NUMBER IN DIFFERENT ENTRIES : '(&00)' - '(&01)' NOT PERMITTED

Meaning

(&00) and (&01): entry name.

SCM0003

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0003   'CONNECTION-ACCESS=*ALL' WITH SVC NUMBERS GREATER THAN 191 IS NOT ALLOWED FOR ENTRY '(&00)'

Meaning

(&00): ENTRY name.

SCM0004

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0004   ENTRY '(&00)' WITH SVC MODE MAY ONLY BE USED FOR SUBSYSTEM DECLARED WITH 'SUBSYSTEM-ACCESS=*SYSTEM'

Meaning

(&00): ENTRY name.

SCM0005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0005   ENTRY '(&00)' MODE=(&01) MAY NOT BE USED WITH 'CONNECTION-ACCESS=*ALL'

Meaning

(&00): ENTRY name
(&01): value of MODE operand.

SCM0006

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0006   ENTRY '(&00)' 'CONNECTION-ACCESS=*SYSTEM' MAY NOT BE USED IN SUBSYSTEM WITH 'MEMORY-CLASS=*LOCAL-UNPRIVILEGED'

Meaning

(&00): ENTRY name.

SCM0007

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0007   ENTRY '(&00)': ONLY 'CONNECTION-SCOPE=*PROGRAM' MAY BE USED WITH 'MEMORY-CLASS=*LOCAL-UNPRIVILEGED'

Meaning

(&00): ENTRY name.

SCM0008

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0008   ENTRY '(&00)': COMBINATION 'CONNECTION-ACCESS=*ALL', 'MODE=*LINK' MAY NOT BE USED IN SUBSYSTEM WITH 'SUBSYSTEM-ACCESS=*SYSTEM'

Meaning

(&00): ENTRY name.

SCM0009

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0009   PROBLEM OCCURRED DURING WRITING ON SYSLST : RETURN CODE '(&00)'

Meaning

(&00): WRLST return code.

SCM0010

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0010   PROBLEM OCCURRED DURING WRITING ON SYSOUT : RETURN CODE '(&00)'

Meaning

(&00): WROUT return code.

SCM0011

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0011   DO YOU REALLY WANT TO OVERWRITE MEMORY CATALOG '(&00)'? REPLY (Y=YES; N=NO)

Meaning

(&00): current catalog name.

Response

Y: the catalog will be overwritten in memory by the new catalog.
N: the statement will be aborted, the memory remains unchanged.

SCM0012

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0012   STATEMENT ABORTED ON USER REQUEST

SCM0013

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0013   CATALOG '(&00)' IS EMPTY

Meaning

(&00): current catalog name.

SCM0014

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0014   INVALID '*CURRENT' VALUE: NO CATALOG IN PROCESS

SCM0015

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0015   CREATION-TIME '(&00)' IS RESERVED FOR PRIVILEGED SUBSYSTEM

Meaning

This CREATION-TIME may only be used for a subsystem defined with
SUBSYSTEM-ACCESS=*SYSTEM
(&00): CREATION-TIME.

SCM0016

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0016   SUBSYSTEM '(&00)' OF VERSION '(&01)' ALREADY EXISTS

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0017

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0017   NO MESSAGE FILE MAY BE SPECIFIED FOR SUBSYSTEM WITH 'CREATION-TIME=*BEFORE-DSSM-LOAD'

SCM0018

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0018   'DYNAMIC-CHECK-ENTRY' MUST BE DEFINED FOR SUBSYSTEM DECLARED WITH 'CREATION-TIME=*BEFORE-DSSM-LOAD'

SCM0019

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0019   VALUE '*CPLINK' MAY ONLY BE USED WITH 'CREATION-TIME=*BEFORE-DSSM-LOAD'

SCM0020

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0020   'CLOSE-CTRL-ROUTINE', 'STOPCOM-ROUTINE' AND 'DEINIT-ROUTINE' NOT DEFINED, VALUE '*NO' IS ASSUMED FOR 'STOP-AT-SHUTDOWN' OPERAND

SCM0021

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0021   REP FILE MAY NOT BE SPECIFIED WITH 'LIBRARY=*CPLINK'

SCM0022

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0022   INCONSISTENCY BETWEEN 'RESET' AND 'SUBSYSTEM-HOLD' OPERANDS

Meaning

RESET=*ALLOWED cannot be used with SUBSYSTEM-HOLD=*FORBIDDEN.

SCM0023

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0023   INCONSISTENCY BETWEEN OPERANDS 'RESTART-REQUIRED' AND 'INIT-ROUTINE'

Meaning

An INIT-ROUTINE must be declared with RESTART-REQUIRED=*YES.

SCM0024

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0024   INCONSISTENCY BETWEEN OPERANDS 'FORCED-STATE-CHANGE' AND 'SUBSYSTEM-HOLD'

Meaning

FORCED-STATE-CHANGE=*ALLOWED cannot be used with
SUBSYSTEM-HOLD=*FORBIDDEN.

SCM0025

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0025   'CLOSE-CTRL-ROUTINE' AND/OR 'STOPCOM-ROUTINE' AND/OR 'DEINIT-ROUTINE' SPECIFIED AS '*DYNAMIC' AND NO 'INIT-ROUTINE' DEFINED

SCM0026

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0026   'INTERFACE-VERSION' MUST BE GIVEN IF 'INIT-ROUTINE' AND/OR 'CLOSE-CTRL-ROUTINE' AND/OR 'STOPCOM-ROUTINE' AND/OR 'DEINIT-ROUTINE' ARE/IS GIVEN

SCM0027

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0027   NONPRIVILEGED SUBSYSTEM MAY NOT DEFINE 'INIT-ROUTINE' NOR 'CLOSE-CTRL-ROUTINE' NOR 'STOPCOM-ROUTINE' NOR 'DEINIT-ROUTINE'

SCM0028

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0028   SAME SVC NUMBER WITH AND WITHOUT 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' IN DIFFERENT ENTRIES: '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): ENTRIES names.

SCM0029

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0029   SUBSYSTEM DEFINED WITH 'CREATION-TIME=*BEFORE-SYSTEM-READY' AND 'SUBSYSTEM-ACCESS' DIFFERENT FROM '*SYSTEM' IMPLICITLY GETS 'CREATION-TIME=*AFTER-SYSTEM-READY'

SCM0030

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0030   SUBSYSTEM NAME 'CP' IS RESERVED FOR DSSM AND MAY NOT BE USED AS SUBSYSTEM NAME OPERAND VALUE

Meaning

DSSM: Dynamic Subsystem Management.

SCM0031

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0031   A SYNTAX FILE CANNOT BE SPECIFIED WITH 'CREATION-TIME' '(&00)'

Meaning

(&00): CREATION-TIME.

SCM0032

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0032   ENTRY '(&00)': VALUE '*CALL' FOR 'CONNECTION-SCOPE' OPERAND RESERVED FOR MODE *ISL OR *SVC

Meaning

(&00): ENTRY name.

SCM0033

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0033   INVALID 'CONNECTION-SCOPE' '(&00)' FOR CALL ENTRY '(&01)' OF SUBSYSTEM '(&02)' VERSION '(&03)'

Meaning

Nonprivileged subsystems that declare a syntax file must have
call ENTRIES with CONNECTION-SCOPE PROGRAM.
(&00): value of CONNECTION-SCOPE operand
(&01): ENTRY name
(&02): name of the subsystem
(&03): version number of the subsystem.

SCM0034

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0034   REFERENCE TO SUBSYSTEM 'CP' IS NOT ALLOWED FOR NONPRIVILEGED SUBSYSTEM

Meaning

Privileged subsystem may refer to CP because that reference is
used to resolve ENTRY point in the CP itself. This is not
allowed for a nonprivileged subsystem.
Therefore the reference to CP is not permitted for nonprivileged
subsystems.

SCM0035

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0035   SUBSYSTEM DECLARED WITH 'CREATION-TIME=*AT-SUBSYSTEM-CALL(ON-ACTION=(&00))' MUST DECLARE AT LEAST ONE ENTRY OF TYPE (&01)

Meaning

CREATION-TIME=*AT-SUBSYSTEM-CALL is reserved for a subsystem that can
be called by SVC or ISL.
(&00): action that induces the creation
(&01): entry mode that is necessary

SCM0036

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0036   TERMINATE WITHOUT SAVING MEMORY CATALOG IN FILE '(&00)'? REPLY (Y=YES; N=NO)

Meaning

(&00): current catalog name.

Response

Y: SSCM program is terminated.
N: the statement will be aborted.

SCM0037

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0037   MEMORY CATALOG NOT SAVED IN FILE '(&00)'

Meaning

(&00): current catalog name.

SCM0038

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0038   CATALOG ALREADY EXISTS IN MEMORY

SCM0039

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0039   TERMINATE WITHOUT SAVING SSD-OBJ IN FILE '(&00)'? REPLY (Y=YES; N=NO)

Meaning

(&00): current SSD-OBJ file name.

Response

Y: SSCM program is terminated.
N: the statement will be aborted.

SCM0040

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0040   SSD-OBJ NOT SAVED IN FILE '(&00)'

Meaning

(&00): current SSD-OBJ file name.

SCM0041

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0041   'MEMORY-CLASS' OF SUBSYSTEM '(&00)' CONVERTED TO '*SYSTEM-GLOBAL'

Meaning

When a subsystem with MEMORY-CLASS=*LOCAL-PRIVILEGED has
SUBSYSTEM-ACCESS=*SYSTEM or *HIGH, the MEMORY-CLASS is converted
to *SYSTEM-GLOBAL.

SCM0042

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0042   SUBSYSTEM '(&00)' CAN ONLY BE GIVEN ONCE

Meaning

This statement can only be entered once when it serves to create
a SSD-OBJ file.
Only one version of a subsystem may be described in a SSD-OBJ file.

SCM0043

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0043   INVALID ENTRY NAME '(&00)' IN SUBSYSTEM '(&01)' VERSION '(&02)'

Meaning

(&00): ENTRY name
(&01): name of the subsystem
(&02): version number of the subsystem.

SCM0044

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0044   'START-ADDRESS' MUST BE A MULTIPLE OF X'100000' IN SUBSYSTEM '(&00)' VERSION '(&01)'

Meaning

(&01): name of the subsystem
(&02): version number of the subsystem.

SCM0045

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0045   SUBSYSTEM '(&00)' VERSION '(&01)'  VERSION-COEXISTENCE=*ALLOWED AND ENTRY '(&02)' MODE *SYSTEM-EXIT  NOT ALLOWED

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem
(&02): ENTRY name.

SCM0046

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0046   'CONNECTION-SCOPE=*OPTIMAL' NOT ALLOWED FOR CALL ENTRY '(&00)' DECLARED WITH 'MODE=*LINK'

Meaning

(&00): ENTRY name.

SCM0047

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0047   WARNING: FOR ENTRY '(&00)' WITH 'MODE=*SVC', 'CONNECTION-ACCESS=*SYSTEM' WOULD BE BETTER THAN 'CONNECTION-ACCESS=*ALL'

Meaning

(&00): ENTRY name.

SCM0200

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0200   CATALOG '(&00)' GENERATED

Meaning

(&00): catalog name.

SCM0201

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0201   CATALOG '(&00)' ALREADY EXISTS OR CREATE-FILE COMMAND HAS BEEN GIVEN

Meaning

(&00): new catalog name.

SCM0202

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0202   CATALOG '(&00)' DOES NOT EXIST

Meaning

(&00): name of catalog to be modified.

SCM0203

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0203   CATALOG NAME NOT DEFINED

SCM0204

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0204   CATALOG '(&00)' IS EMPTY. CATALOG NOT GENERATED

Meaning

(&00): current catalog name.

SCM0205

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0205   CATALOG HAS NOT BEEN CHECKED

Meaning

Catalog must be checked before the //SAVE-CATALOG statement.

SCM0206

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0206   CATALOG IS INCONSISTENT

SCM0207

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0207   LINK RELATIONS NOT CHECKED

SCM0208

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0208   FUNCTIONAL DEPENDENCES NOT CHECKED

SCM0209

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0209   CATALOG CONTAINS INCONSISTENT RELATIONS

SCM0210

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0210   CATALOG '(&00)' GENERATED WITH FORCED='(&01)'

Meaning

(&00): catalog name
(&01): operand value.

SCM0211

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0211   CATALOG '(&00)' NOT MODIFIED. CATALOG NOT GENERATED

Meaning

(&00): current catalog name.

SCM0212

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0212   CATALOG '(&00)' ALREADY EXISTS ON DISK, DO YOU REALLY WANT TO OVERWRITE IT ? REPLY (Y=YES; N=NO)

Meaning

(&00): new catalog name.

Response

Y: the catalog will be overwritten on disk by the new catalog.
N: the statement will be aborted, the memory remains unchanged.

SCM0213

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0213   CATALOG '(&00)' ALREADY EXISTS ON DISK

Meaning

(&00): new catalog name.

SCM0300

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0300   REQM ERROR. SSCM TERMINATED

Meaning

During processing, a REQM error was detected by the program.
SSCM is stopped to avoid future problems.

SCM0301

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0301   REQM ERROR. STATEMENT ABNORMALLY TERMINATED

Meaning

During processing, a REQM error was detected by the program.
Retry later or issue another statement.

SCM0302

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0302   RELM ERROR. STATEMENT ABNORMALLY TERMINATED

Meaning

During processing, a RELM error was detected by the program.
Retry later or issue another statement.

SCM0303

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0303   SUBSYSTEM NAME '(&00)' NOT PREVIOUSLY DEFINED

Meaning

(&00): name of the subsystem that must be disjunct.

SCM0305

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0305   NUMBER OF SUBSYSTEM ENTRIES EXCEEDS LIMIT '(&00)'

Meaning

(&00): maximum number of call ENTRIES.

SCM0306

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0306   NUMBER OF STORED SUBSYSTEMS EXCEEDS LIMIT '(&00)'

Meaning

(&00): maximum number of subsystems.

SCM0307

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0307   NUMBER OF LINK RELATIONS EXCEEDS LIMIT '(&00)'

Meaning

(&00): maximum number of link relations.

SCM0308

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0308   NUMBER OF DEPENDENCE RELATIONS EXCEEDS LIMIT '(&00)'

Meaning

(&00): maximum number of dependence relations.

SCM0309

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0309   VERSION '(&00)' OF SUBSYSTEM '(&01)' DOES NOT EXIST

Meaning

(&00): version number of the subsystem
(&01): name of the subsystem.

SCM0310

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0310   NUMBER OF LINK RELATIONS EXCEEDS LIMIT '15'

Meaning

a subsystem can not declare more than 15 link relations.

SCM0312

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0312   TWO DIFFERENT TSN'S CANNOT BE SPECIFIED FOR SUBSYSTEM '(&00)'

Meaning

(&00): name of the subsystem.

SCM0313

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0313   NUMBER OF DISJUNCTIONS EXCEEDS LIMIT '(&00)'

Meaning

(&00): Maximum number of disjunctions.

SCM0314

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0314   SUBSYSTEM '(&00)' VERSION '(&01)' IS *WORK-TASK AND DOES NOT SHARE ITS HOLDER TASK

Meaning

When a subsystem has been declared *WORK-TASK and afterwards
*SHARED-HOLDER, it stays *WORK-TASK.

SCM0315

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0315   SUBSYSTEM '(&00)' VERSION '(&01)' IS ALREADY '*WORK-TASK', USE //MODIFY-WORK-TASK-ATTRIBUTE STATEMENT IF YOU WANT TO MODIFY THE 'TSN'

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0401

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0401   PROGRAM '(&00)' UNKNOWN IN SYNTAX FILE. STATEMENT ABNORMALLY TERMINATED

Meaning

Name inconsistency is detected between the program and the syntax file.
(&00): program name.

Response

Activate the correct syntax file.

SCM0402

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0402   SDF NOT LOADED IN SYSTEM. STATEMENT ABNORMALLY TERMINATED

Response

Ask the system administrator to load SDF.

SCM0403

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0403   RDSTMT OR TRSTMT RETURN CODE X'(&00)'. STATEMENT ABNORMALLY TERMINATED

Meaning

SDF macro RDSTMT or TRSTMT returns an unexpected error code.
For more detailed information see SDF manual.
(&00): RDSTMT or TRSTMT return code.

Response

Contact the system administrator.

SCM0404

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0404   STATEMENT '(&00)' UNKNOWN IN SYNTAX FILE. STATEMENT ABNORMALLY TERMINATED

Meaning

The statement is defined in the syntax file but is not supported
by the program.
(&00): statement name.

SCM0405

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0405   SSCM NORMALLY TERMINATED

Meaning

The program terminated normally.
SSCM: Static Subsystem Catalog Management.

SCM0406

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0406   SSCM ABNORMALLY TERMINATED

Meaning

The program is abnormally terminated due to an earlier error.
For more detailed information see the session log.
SSCM: Static Subsystem Catalog Management.

SCM0500

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0500   SUBSYSTEM '(&00)' OF VERSION '(&01)' IS NOT ADDED, IT ALREADY EXISTS

Meaning

The subsystem is ignored, and processing continues.
(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0600

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0600   SUBSYSTEM '(&00)' TO BE DISJUNCT DOES NOT EXIST

Meaning

The subsystem must already have been declared before giving
the //SEPARATE-ADDRESS-SPACE statement.
(&00): name of the subsystem.

SCM0602

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0602   SUBSYSTEM '(&00)' MAY NOT BE DISJUNCT FROM ITSELF

Meaning

(&00): name of the subsystem.

SCM0603

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0603   SUBSYSTEM '(&00)' SPECIFIED TWICE IN LIST OF SUBSYSTEMS TO BE DISJUNCT

Meaning

(&00): name of the subsystem.

SCM0604

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0604   SUBSYSTEM '(&00)' MAY NOT HAVE RELATION WITH ITSELF

Meaning

(&00): name of the subsystem.

SCM0615

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0615   'STOPCOM-ROUTINE' MUST BE DECLARED AS '*DYNAMIC' OR '*NO' WITH 'CLOSE-CTRL-ROUTINE=*DYNAMIC'

SCM0616

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0616   A 'DEINIT-ROUTINE' ENTRY NAME MUST BE GIVEN WITH AN 'INIT-ROUTINE' AND A 'CLOSE-CTRL-ROUTINE' ENTRY NAME

SCM0617

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0617   OPERAND ERROR: SUBSYSTEM '(&00)' WITH SEVERAL REFERENCE RELATIONS TO SUBSYSTEM '(&01)' AND 'VERSION-EXCHANGE/-COEXISTENCE=*ALLOWED' NOT ALLOWED

Meaning

(&00): name and version number of the subsystem
(&01): name of the subsystem.

SCM0618

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0618   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'CREATION-TIME=*MANDATORY-AT-STARTUP' HAS RELATION TO SUBSYSTEM '(&01)' WITH 'CREATION-TIME' NOT EQUAL TO '*BEFORE-DSSM-LOAD/*AT-DSSM-LOAD/*MANDATORY-AT-STARTUP'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0619

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0619   'DEINIT-ROUTINE' MUST BE DECLARED AS '*DYNAMIC' WITH 'CLOSE-CTRL-ROUTINE=*DYNAMIC'

SCM0620

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0620   DIFFERENT VERSIONS OF SUBSYSTEM '(&00)' - '(&01)' WITH 'CREATION-TIME=*AT-SUBSYSTEM-CALL' AND 'VERSION-COEXISTENCE=*FORBIDDEN' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0621

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0621   OPERAND ERROR: SAME 'TSN' AND 'VERSION-COEXISTENCE/-EXCHANGE=*ALLOWED' NOT ALLOWED FOR WORK TASK SUBSYSTEMS '(&00)' AND '(&01)'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0622

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0622   ENTRY '(&00)': ONLY 'MODE=*ISL(FUNCTION-NUMBER=*NONE)' MAY BE USED WITH 'CONNECTION-ACCESS=*SIH'

Meaning

(&00): ENTRY name.

SCM0623

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0623   ENTRY '(&00)': 'CONNECTION-ACCESS=*SIH' MAY ONLY BE USED FOR SUBSYSTEM DECLARED WITH 'MEMORY-CLASS=*SYSTEM-GLOBAL(SUBSYSTEM-ACCESS=*SYSTEM)'

Meaning

(&00): ENTRY name.

SCM0624

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0624   ENTRY '(&00)': ONLY 'CONNECTION-SCOPE=*OPTIMAL' MAY BE USED WITH 'CONNECTION-ACCESS=*SIH'

Meaning

(&00): ENTRY name.

SCM0625

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0625   OPERANDS ERROR: 'CORRECTION-STATE' DIFFERENT FROM '*UNCHANGED' IS ONLY ALLOWED FOR A SSD-OBJ FILE

SCM0626

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0626   SAME ISL ENTRY WITH SAME 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' IN SUBSYSTEMS: '(&00)' - '(&01)' WITH 'VERSION-COEXISTENCE=*ALLOWED' IS NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0627

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0627   SAME ISL ENTRY WITH SAME 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' IN DIFFERENT SUBSYSTEMS '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0628

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0628   SAME COMBINATION 'SVC-NUMBER FUNCTION-NUMBER FUNCTION-VERSION' IN SUBSYSTEMS '(&00)' - '(&01)' WITH 'VERSION-COEXISTENCE=*ALLOWED' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0629

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0629   SAME COMBINATION 'SVC-NUMBER FUNCTION-NUMBER FUNCTION-VERSION' IN DIFFERENT SUBSYSTEMS '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0631

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0631   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'CREATION-TIME=*AT-DSSM-LOAD' HAS RELATION TO SUBSYSTEM '(&01)' WITH 'CREATION-TIME' NOT EQUAL TO '*BEFORE-DSSM-LOAD/*AT-DSSM-LOAD'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0632

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0632   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'CREATION-TIME=*BEFORE-DSSM-LOAD' HAS RELATION TO SUBSYSTEM '(&01)' WITH 'CREATION-TIME' NOT EQUAL TO '*BEFORE-DSSM-LOAD

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0633

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0633   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'STOP-AT-SHUTDOWN=*NO' HAS REFERENCE TO SUBSYSTEM '(&01)' WITH 'STOP-AT-SHUTDOWN=*YES'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0634

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0634   SAME SVC NUMBER WITH AND WITHOUT 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' IN '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0635

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0635   SAME ISL ENTRY IN DIFFERENT SUBSYSTEMS: '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0636

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0636   SAME ISL ENTRY WITH AND WITHOUT 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' IN '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0637

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0637   SAME COMBINATION 'SVC-NUMBER FUNCTION-NUMBER FUNCTION-VERSION' FOR ENTRIES '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): call ENTRY names.

SCM0638

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0638   'FIRST-CONNECTION=*FORBIDDEN' NOT ALLOWED FOR CALL ENTRY '(&00)' DECLARED WITH 'MODE=*LINK/*SYSTEM-EXIT'

Meaning

(&00): ENTRY name.

SCM0639

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0639   'FIRST-CONNECTION=*FORBIDDEN' NOT ALLOWED FOR CALL ENTRY '(&00)' DECLARED WITH 'CONNECTION-ACCESS=*SIH'

Meaning

(&00): ENTRY name.

SCM0640

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0640   SUBSYSTEM MUST DECLARE AT LEAST ONE ENTRY WITH FIRST-CONNECTION=*ALLOWED

SCM0641

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0641   INCONSISTENCY IN LOGICAL-ID

Meaning

If a LOGICAL-ID is given for one subsystem file, a LOGICAL-ID must be
given for each subsystem file.

SCM0642

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0642   NO VALUE PREVIOUSLY GIVEN FOR THE LOGICAL-ID OF (&00)

Meaning

'*UNCHANGED' can not be used if no value has been previously given for the
LOGICAL-ID.
(&00): Concerned subsystem file.

SCM0643

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0643   NO VALUE PREVIOUSLY GIVEN FOR THE DEFAULT-NAME OF (&00)

Meaning

'*UNCHANGED' can not be used if no value has been previously given for the
DEFAULT-NAME.
(&00): Concerned subsystem file.

SCM0644

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0644   FILE '(&00)' WITH LOGICAL-ID '(&01)' DOES NOT EXIST.

Meaning

(&00): file name.
(&01): LOGICAL-ID of the file.

SCM0645

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0645   LOGICAL-ID '(&00)' HAS NO ASSOCIATED PATH-NAME.

Meaning

(&00): LOGICAL-ID of the file.

SCM0646

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0646   PRIVILEGE ERROR: USER NOT ALLOWED TO SEE PATH-NAME.

SCM0647

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0647   A SUBSYSTEM INSTALLED WITH IMON MUST SPECIFY AN INSTALLATION-UNIT

SCM0648

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0648   SUBSYSTEM '(&00)' MUST SPECIFY THE SAME INSTALLATION-UNIT THAN SUBSYSTEM '(&01)'

Meaning

(&00), (&01): name of the subsystem.

SCM0649

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0649   SYNTAX ERROR IN INSTALLATION-UNIT FORMAT

SCM0650

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0650   SUBSYSTEM '(&00)' NOT YET DECLARED

Meaning

(&00): name of the subsystem.

SCM0656

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0656   DIFFERENT VERSIONS OF SUBSYSTEMS '(&00)' - '(&01)' DECLARED WITH 'CREATION-TIME=*AT-SUBSYSTEM-CALL' AND 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' NOT SPECIFIED NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0657

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0657   DIFFERENT VERSIONS OF SUBSYSTEMS '(&00)' - '(&01)' DECLARED WITH 'CREATION-TIME=*BEFORE-DSSM-LOAD/*AT-DSSM-LOAD/*MANDATORY-AT-STARTUP/*BEFOR E-SYSTEM-READY/*AFTER-SYSTEM-READY' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0658

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0658   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'CREATION-TIME=*BEFORE-SYSTEM-READY' HAS RELATION TO SUBSYSTEM '(&01)' WITH 'CREATION-TIME' NOT EQUAL TO '*BEFORE-DSSM-LOAD/*AT-DSSM-LOAD/*MANDATORY-AT-STARTUP/*BEFORE-SYSTEM-READY '

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0659

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0659   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'SUBSYSTEM-ACCESS=*SYSTEM' HAS LINK RELATION TO SUBSYSTEM '(&01)' WITH 'SUBSYSTEM-ACCESS=*LOW/*HIGH'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0660

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0660   OPERAND ERROR: SUBSYSTEM '(&00)' HAS LINK RELATION TO SUBSYSTEM '(&01)' WITH 'MEMORY-CLASS=*LOCAL-PRIVILEGED'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0661

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0661   OPERAND ERROR: SUBSYSTEM '(&00)' HAS LINK RELATION TO SUBSYSTEM '(&01)' WITH 'MEMORY-CLASS=*LOCAL-UNPRIVILEGED'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0662

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0662   OPERAND ERROR: ENTRY '(&00)': ONLY 'MODE=*LINK' MAY BE USED WITH 'MEMORY-CLASS=*BY-SLICE'

Meaning

(&00) : ENTRY NAME

SCM0663

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0663   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'MEMORY-CLASS=*SYSTEM-GLOBAL' DEPENDS ON SUBSYSTEM '(&01)' WITH 'MEMORY-CLASS=*LOCAL-PRIVILEGED'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0664

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0664   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'MEMORY-CLASS=*SYSTEM-GLOBAL' DEPENDS ON SUBSYSTEM '(&01)' WITH 'MEMORY-CLASS=*LOCAL-UNPRIVILEGED'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0665

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0665   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'SUBSYSTEM-ACCESS=*SYSTEM' DEPENDS ON SUBSYSTEM '(&01)' WITH 'SUBSYSTEM-ACCESS=*LOW/*HIGH' OR WITH 'MEMORY-CLASS=*BY-SLICE'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0666

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0666   ONLY 'SUBSYSTEM-LOAD-MODE=*ADVANCED' MAY BE USED WITH 'MEMORY-CLASS=*BY-SLICE'

SCM0667

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0667   ENTRY '(&00)': ONLY 'CONNECTION-ACCESS=*ALL' MAY BE USED WITH 'MEMORY-CLASS=*BY-SLICE'

Meaning

(&00): ENTRY name.

SCM0668

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0668   OPERAND ERROR: SUBSYSTEM '(&00)' HAS LINK RELATION TO SUBSYSTEM '(&01)' WITH 'MEMORY-CLASS=*BY-SLICE'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0669

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0669   OPERAND ERROR : INCOMPATIBILITY BETWEEN OPERAND MEMORY CLASS AND OPERAND ENTRY

Meaning

MEMORY CLASS = 5 (Local-unprivileged) and ENTRY=BY-PROGRAM cannot be given
together for a subsystem declaration.

SCM0670

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0670   SAME SVC NUMBER WITHOUT 'FUNCTION-NUMBER' AND 'FUNCTION-VERSION' OR SAME SYSTEM-EXIT NUMBER IN DIFFERENT SUBSYSTEMS: '(&00)' - '(&01)' NOT ALLOWED

Meaning

(&00), (&01): name and version number of the subsystem/
              call ENTRY name.

SCM0671

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0671   RANGE ERROR REPORT FOR SUBSYSTEM '(&00)' VERSION '(&01)'

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0672

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0672   VERSION RANGE '(&00)'-'(&01)' NOT SATISFIED BY SUBSYSTEM '(&02)'

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0673

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0673   CYCLE IN RELATION BETWEEN SUBSYSTEM '(&00)' VERSION '(&01)' AND SUBSYSTEM '(&02)' VERSION '(&03)'

Meaning

(&00), (&01): name of the subsystem
(&01), (&03): version number of the subsystem.

SCM0674

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0674   OPERAND ERROR: ENTRY '(&00)': ONLY 'CONNECTION-SCOPE=*TASK' OR 'CONNECTION-SCOPE=*PROGRAM' MAY BE USED WITH 'MEMORY-CLASS=*BY-SLICE'

Meaning

(&00) : ENTRY NAME

SCM0683

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0683   OPERAND ERROR: SUBSYSTEM '(&00)' WITH 'CREATION-TIME=*AFTER-SYSTEM-READY' HAS RELATION TO SUBSYSTEM '(&01)' WITH INCOMPATIBLE 'CREATION-TIME'

Meaning

(&00), (&01): name and version number of the subsystem.

SCM0684

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0684   OPERAND ERROR: FOR 'MEMORY-CLASS=*LOCAL-UNPRIVILEGED' OPERAND 'SIZE' AND 'START-ADDRESS' OF SUBSYSTEM '(&00)' AND SUBSYSTEM '(&01)' NOT PROCESSABLE

Meaning

The subsystems (&00) and (&01) overlap each other because of
the specified operands SIZE and START-ADDRESS.
(&00), (&01): name and version number of the subsystem.

SCM0699

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0699   INVALID 'CORRECTION-STATE' SYNTAX. 'CORRECTION-STATE' '(&00)' MUST BE OF FORM ANN

Meaning

(&00): invalid CORRECTION-STATE
The CORRECTION-STATE must have the form: ANN
A: letter A to Z
N: integer 0 to 9.

SCM0700

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0700   INVALID VERSION SYNTAX. THE VERSION '(&00)' MUST BE OF FORM [V][N]N.N[ANN]

Meaning

(&00): invalid version.
The version of a subsystem must have the form: [V][N]N.N[ANN].
V: abbreviation of version.
N: integer 0 to 9.
A: letter A to Z.

SCM0701

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0701   '(&00)' '(&01)' IS DUPLICATE IN LIST '(&02)'

Meaning

(&00): list type
(&01): list element
(&02): operation type.

SCM0702

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0702   DUPLICATE '(&00)' EXISTS BETWEEN '(&01)' LIST AND '(&02)' LIST

Meaning

(&00): element type.
(&01), (&02): list type.

SCM0806

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0806   DMS ERROR '(&00)' ON FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)

Meaning

During processing, a DMS error was detected by the program.
For more detailed information about the DMS error code enter /HELP-MSG
in system mode or see the BS2000 manual 'System Messages'.
(&00): DMS error code
(&01): file name.

Response

Check the error cause and issue the statement again.

SCM0807

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0807   CALL-ENTRIES OF SUBSYSTEM '(&00)' WITH VERSION '(&01)' ARE DECLARED AS BY-PROGRAM. THEREFORE THE STATEMENT ADD-SUBSYSTEM-ENTRIES MAY NOT BE USED

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0818

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0818   TINF ERROR '(&00)'. STATEMENT ABNORMALLY TERMINATED

Meaning

An error has been returned by the TINF macro.
(&00): TINF error code.

Response

Check the return code to detect the error cause.

SCM0820

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0820   FILE '(&00)' IS NOT A DSSM CATALOG OR HAS AN INVALID VERSION

Meaning

(&00): catalog name.

SCM0821

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0821   CHECK REPORT:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0822

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0822   **** NO ERROR ****

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0823

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0823   CHECK OF LINK REFERENCES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0824

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0824   VERSION RANGE CHECK:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0825

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0825   LINK RELATION CHECK:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0826

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0826   CHECK OF FUNCTIONAL DEPENDENCE:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0827

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0827   DEPENDENCE RELATION CHECK:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0828

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0828   CHECK OF RELATED FILES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0830

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0830   CYCLE CHECK:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM0831

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0831   WARNING, CATALOG CREATED FOR A PREVIOUS DSSM VERSION : (&00)

Meaning

(&00) : DSSM version of the previous catalogue
The edited catalogue was created in a previous version
of SSCM and the SAVE will convert it in the new format
that may be unusable if the DSSM and SSCM versions
on your system do not match

SCM0852

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0852   CONTROL COMMAND COULD NOT BE FOUND. STATEMENT ABNORMALLY TERMINATED

Meaning

During processing, the MCLP macro could not be executed
because the current command could not be found in the system syntax file.

SCM0897

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0897   SUBSYSTEM '(&00)' WITH 'CLOSE-CTRL-ROUTINE=*DYNAMIC MUST BE DECLARED WORK TASK

Meaning

(&00): name of the subsystem.
Statement aborted due to detected error

Response

Issue an 'ASSIGN-HOLDER-TASK TYPE=*WORK-TASK' and after that re-enter the
'SAVE-SSD' statement.

SCM0898

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0898   NO VERSION OF SUBSYSTEM '(&00)' EXISTS IN SSD-OBJ

Meaning

(&00): name of the subsystem.

SCM0899

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0899   SUBSYSTEM '(&00)' WITH VERSION '(&01)' NOT DECLARED IN SSD-OBJ

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0900

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0900   NO VERSION OF SUBSYSTEM '(&00)' EXISTS IN CATALOG

Meaning

(&00): name of the subsystem.

SCM0901

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0901   SUBSYSTEM '(&00)' WITH VERSION '(&01)' NOT DECLARED IN CATALOG

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0902

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0902   SUBSYSTEM '(&00)' VERSION '(&01)' MUST DECLARE 'INIT-ROUTINE' TO BE ABLE TO CAPTURE HOLDER TASK AS WORK TASK

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0903

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0903   SUBSYSTEM '(&00)' VERSION '(&01)' MUST DECLARE 'STOPCOM-ROUTINE' AS '*DYNAMIC' OR 'STOPCOM-ROUTINE=*NO' TO BE ABLE TO CAPTURE HOLDER TASK AS WORK TASK

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0904

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0904   SUBSYSTEM '(&00)' VERSION '(&01)' WITH 'STOPCOM-ROUTINE=*NO' MUST DECLARE 'DEINIT-ROUTINE' AS '*DYNAMIC' TO BE ABLE TO CAPTURE HOLDER TASK AS WORK TASK

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0905

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0905   SUBSYSTEM '(&00)' VERSION '(&01)' MUST DECLARE 'CLOSE-CTRL-ROUTINE' AS '*DYNAMIC' OR 'CLOSE-CTRL-ROUTINE= *NO' TO BE ABLE TO CAPTURE HOLDER TASK AS WORK TASK

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0906

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0906   WARNING: DISJUNCTION RELATION BETWEEN SUBSYSTEM '(&00)' AND SUBSYSTEM '(&01)' IS LOST

Meaning

This relation is lost due to the //REMOVE-CATALOG-ENTRY of subsystem
(&00) or (&01).
This statement removes a subsystem definition from
a subsystem catalog.

SCM0907

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0907   SUBSYSTEM '(&00)' SPECIFIED TWICE IN 'BY-SUBSYSTEM' LIST

Meaning

(&00): name of the subsystem.

SCM0908

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0908   //MODIFY-WORK-TASK-ATTRIBUTE STATEMENT NOT ALLOWED. SUBSYSTEM '(&00)' '(&01)' IS NOT WORK TASK

Meaning

(&00): name of the subsystem
(&01): version number of the subsystem.

SCM0909

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0909   WARNING: DISJUNCTION RELATION BETWEEN '(&00)' AND '(&01)' DOES NOT EXIST. REMOVE NOT POSSIBLE

Meaning

(&00), (&01): name of the subsystem.

SCM0910

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM0910   WARNING: DISJUNCTION RELATION BETWEEN '(&00)' AND '(&01)' ALREADY EXISTS

Meaning

(&00), (&01): name of the subsystem.

SCM1000

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1000   INVALID FORMAT OF FILE '(&00)'

Meaning

The file given in the //ADD-CATALOG-ENTRY statement must have
been created by an editor.
It must be SAM or ISAM with KEYPOS=5 and KEYLEN=8.

SCM1001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1001   FILE '(&00)' IS EMPTY

SCM1002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1002   MACRO NAME '(&00)' UNKNOWN

Meaning

The macro name '(&00)' is not a DSSMGEN macro.

Response

Correct the macro name and re-enter the //ADD-CATALOG-ENTRY statement.

SCM1003

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1003   DSSMGEN MACRO '(&00)' IGNORED

Meaning

The macro (&00) is ignored by the converter.

SCM1004

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1004   ERROR DETECTED BY SSCM FOR SUBSYSTEM '(&00)'

Meaning

The DSSMGEN declarations have been converted and sent to SSCM.
SSCM: Static Subsystem Catalog Management.

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1005   NO SUBSYSTEM ADDED

SCM1006

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1006   A SUBSYSTEM CANNOT BE WORK TASK AND SHARE ITS HOLDER TASK

Meaning

A work task subsystem is given with another subsystem in the list
of the DSMHOL statement.

SCM1007

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1007   VALUE '(&00)' OF PARAMETER '(&01)' INCORRECT

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1008

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1008   UNKNOWN PARAMETER '(&00)' IN MACRO '(&01)'

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1009

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1009   PARAMETER '(&00)' NO LONGER SUPPORTED

SCM1010

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1010   PARAMETER 'ENTRY' MISSING IN DSSMGEN STATEMENT 'DSMCALL' FOR SUBSYSTEM '(&00)'

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1011

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1011   SUBSYSTEM CANNOT BE DISJUNCT TO ITSELF

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1012

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1012   WARNING: DSSMGEN PARAMETER 'RESTART' NOT PROCESSABLE

Meaning

There is more than one subsystem in the same holder task.

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1013

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1013   DSSMGEN STATEMENT 'DSMAS CLASS=6, ACCESS=SYSTEM' FORBIDDEN

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1014

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1014   THE FILE DOES NOT CONTAIN DSSMGEN STATEMENTS AND IS NOT A SSD-OBJ FILE

Meaning

The file given in the //ADD-CATALOG-ENTRY statement does not contain
DSSMGEN statements and is not a SSD-OBJ file.

SCM1015

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1015   ERROR(S) IN SOURCE FILE. NO SUBSYSTEM ADDED

Meaning

Syntax and/or semantic errors have been discovered in the source file.

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1016

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1016   NUMBER OF SUBSYSTEMS EXCEEDS MAXIMUM ALLOWED

Meaning

In the source file, there are more than 255 subsystems.

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1017

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1017   ERROR DETECTED BY SSCM

Meaning

The DSSMGEN declarations have been converted and sent to SSCM.
SSCM: Static Subsystem Catalog Management.

Response

Correct the source file and re-enter //ADD-CATALOG-ENTRY statement.

SCM1100

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1100   SUBSYSTEM '(&00)' VERSION '(&01)' DOES NOT EXIST IN CATALOG

SCM1101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1101   SUBSYSTEM '(&00)' VERSION '(&01)' HAS CHANGED 'MEMORY-CLASS'. ALL PARAMETERS MUST BE SPECIFIED

SCM1102

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1102   SUBSYSTEM '(&00)' VERSION '(&01)' NO LONGER HAS THE CHARACTERISTICS OF A WORK TASK SUBSYSTEM

SCM1103

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1103   '(&00)' '(&01)' TO BE ADDED ALREADY EXISTS FOR SUBSYSTEM '(&02)' VERSION '(&03)'

SCM1104

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1104   '(&00)' '(&01)' TO BE MODIFIED DOES NOT EXIST FOR SUBSYSTEM '(&02)' VERSION '(&03)'

SCM1105

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1105   '(&00)' '(&01)' TO BE REMOVED DOES NOT EXIST FOR SUBSYSTEM '(&02)' VERSION '(&03)'

SCM1106

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1106   ENTRY '(&00)' OF SUBSYSTEM '(&01)' VERSION '(&02)' HAS CHANGED TYPE. ALL PARAMETERS MUST BE SPECIFIED

SCM1107

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1107   ENTRIES OF SUBSYSTEM '(&00)' VERSION '(&01)' ARE DEFINED '*BY-PROGRAM', NO (&02) POSSIBLE

SCM1108

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM1108   ENTRIES OF SUBSYSTEM '(&00)' VERSION '(&01)' ARE NOT DEFINED '*BY-PROGRAM', NO (&02) POSSIBLE

SCM3001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM3001   STATEMENT ABNORMALLY TERMINATED

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management.

SCM3002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM3002   SYNTAX VALIDATION TERMINATED

Meaning

The user has set switch 1 to ON.
The statement has been syntactically analyzed by SSCM.

SCM4000

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4000   NO SUBSYSTEM CORRESPONDING TO SELECTION

Meaning

Catalog does not contain the subsystem given in the statement.

SCM4001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4001   SHOW REPORT:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4002   SUBSYSTEM CATALOG: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4003

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4003    FORCED GENERATION: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4004

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4004    HSI              : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4005   CONTAINED SUBSYSTEMS:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4006

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4006            NAME        VERSION           NAME       VERSION

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4007

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4007            ----        -------           ----       -------

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4008

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4008        (&00)        (&01)       (&02)       (&03)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4009

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4009   ********************************************************************

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4010

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4010   * (&00) * SUBSYSTEM NAME: (&01)      VERSION: (&02)            *

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4011

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4011    REP-FILE-MANDATORY  : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4012

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4012   GENERAL ATTRIBUTES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4013

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4013    CREATION-TIME           : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4014

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4014    STOP-AT-SHUTDOWN        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4015

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4015    SUBSYSTEM-HOLD          : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4016

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4016    STATE-CHANGE-CMDS       : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4017

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4017    FORCED-STATE-CHANGE     : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4018

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4018    RESET                   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4019

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4019    RESTART-REQUIRED        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4020

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4020    VERSION-COEXISTENCE     : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4021

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4021    VERSION-EXCHANGE        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4022

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4022   INTERNAL ENTRIES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4023

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4023    INIT-ROUTINE         : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4024

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4024    STOPCOM-ROUTINE      : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4025

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4025    DEINIT-ROUTINE       : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4026

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4026    DYNAMIC-CHECK-ENTRY  : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4027

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4027    INTERFACE-VERSION    : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4028

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4028   MEMORY ATTRIBUTES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4029

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4029    MEMORY-CLASS: (&00)    SUBSYSTEM-ACCESS: (&01)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4030

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4030    SIZE : (&00)         START-ADDRESS   : (&01)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4031

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4031    RELATIVE LOCATION IN ADDRESS SPACE STRIPE   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4032

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4032   RELATED FILES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4033

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4033    INSTALLATION-USERID : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4034

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4034    LIBRARY             : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4035

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4035    MESSAGE-FILE        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4036

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4036    SUBSYSTEM-INFO-FILE : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4037

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4037    REP-FILE            : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4038

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4038   LINK ATTRIBUTES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4039

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4039    LINK-ENTRY: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4040

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4040    AUTOLINK  : (&00)     UNRESOLVED: (&01)     CHECK-REFERENCE: (&02)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4041

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4041   REFERENCED SUBSYSTEMS:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4042

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4042            NAME    LOWEST VERSION    HIGHEST VERSION

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4043

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4043            ----    --------------    ---------------

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4044

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4044            **** NONE ****

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4045

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4045         (&00)          (&01)            (&02)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4046

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4046   FUNCTIONAL DEPENDENCE WITH SUBSYSTEMS:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4047

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4047   SEPARATE-ADDRESS-SPACE FROM SUBSYSTEMS:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4048

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4048             NAME           NAME           NAME           NAME

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4049

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4049             ----           ----           ----           ----

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4050

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4050         (&00)       (&01)       (&02)       (&03)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4051

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4051   SHARED-HOLDER-TASK: (&00)      WITH SUBSYSTEMS:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4052

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4052             NAME    VERSION           NAME    VERSION

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4053

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4053             ----    -------           ----    -------

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4054

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4054            **** WORK TASK ****

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4055

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4055         (&00)    (&01)       (&02)    (&03)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4056

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4056   SUBSYSTEM-ENTRIES:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4057

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4057    NAME: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4058

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4058     MODE               : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4059

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4059     NUMBER             : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4060

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4060     CALL-BY-SYSTEM-EXIT: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4061

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4061     FUNCTION-NUMBER    : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4062

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4062     FUNCTION-VERSION   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4063

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4063     CONNECTION-ACCESS  : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4064

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4064     CONNECTION-SCOPE   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4065

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4065   SUMMARY:

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4070

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4070     CE-BY-PROGRAM      : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4071

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4071     DUMMY-ENTRY        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4076

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4076   (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4077

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4077    SYNTAX-FILE         : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4078

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4078    COPYRIGHT               : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4079

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4079    YEAR                    : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4080

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4080    CLOSE-CTRL-ROUTINE   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4081

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4081    SUBSYSTEM-LOAD-MODE     : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4082

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4082                             |            GENERAL ATTRIBUTES           |  INTERNAL ENTRIES   | SUBSYST | MEMORY|  RELATED FILES  | 

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4083

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4083                             |  C   S                                  |      C           D  | ENTRIES |       |              I  |  H

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4084

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4084                             |  R   H       C           C   C   X   R  |      L   S       Y  |         |       |  M   R   S   N  |  O

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4085

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4085                             |  E   U       O   F       H   O   C   E  |      O   T   D   N  |         |    A  |  S   E   Y   F  |  L

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4086

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4086    NR  SS-NAME  VERSION STD |  A   T       M   O   R   K   E   H   S  |      S   O   E   C  |      S  | C  C  |  G   P   N   O  |  D

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4087

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4087                             |  T   D   H   M   R   E   L   X   A   T  |  I   E   P   I   H  |      Y  | L  C  |  F   F   F   F  |  E

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4088

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4088                             |  I   O   O   A   C   S   I   I   N   A  |  N   C   C   N   E  |  S   S  | A  E  |  I   I   I   I  |  R

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4089

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4089                             |  M   W   L   N   E   E   N   S   G   R  |  I   T   O   I   C  |  V   E  | S  S  |  L   L   L   L  |  I

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4090

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4090                             |  E   N   D   D   D   T   K   T   E   T  |  T   L   M   T   K  |  C   X  | S  S  |  E   E   E   E  |  D

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4091

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4091   --------------------------------------------------------------------------- --------------------------------------------------------

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4092

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4092     FIRST-CONNECTION   : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4093

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4093      LOGICAL-ID        : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4094

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4094      DEFAULT-NAME      : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4095

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4095    INSTALLATION-UNIT       : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4096

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4096      ON-ACTION             : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4101   INVALID '*CURRENT' VALUE: NO SSD-OBJ IN PROCESS

SCM4102

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4102   FORMAT OF FILE '(&00)' INVALID

Meaning

The file must be a SSD-OBJ file created by SSCM

SCM4103

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4103   FILE '(&00)' IS EMPTY

SCM4104

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4104   SSD-OBJ FILE: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4105

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4105   SSD-NAME             :      (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4106

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4106   SSD-VERSION          :           (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4107

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4107   DOMAIN               : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4108

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4108   CORRECTION           :      (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4109

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4109                               (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4110

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4110   **************************************************************

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4111

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4111   * SUBSYSTEM NAME: (&00)     VERSION: (&01)              *

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4120

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4120   SSCM VERSION: (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4121

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4121   CATALOG VERSION: (&00)     (&01)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4122

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4122    STATUS OF THE SUBSYSTEM : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4123

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4123    MONITORING JOB VARIABLE : (&00)

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4124

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4124   * (&00) * LOCAL SUBSYSTEM NAME: (&01)      VERSION: (&02)      *

Meaning

This message is used internally by SSCM for its information reporting.
SSCM: Static Subsystem Catalog Management

SCM4151

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4151   SSD-OBJ FILE '(&00)' ALREADY EXISTS

Meaning

(&00): SSD-OBJ file name.

SCM4152

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4152   SSD-OBJ FILE '(&00)' CREATED

Meaning

(&00): SSD-OBJ file name.

SCM4153

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4153   INCOMPATIBLE SSD-OBJ FILE '(&00)' CANNOT BE PROCESSED

SCM4154

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM4154   SSD-OBJ FILE IS CORRUPTED

SCM5000

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

SCM5000   PROGRAM SSCM VERSION (&00) STARTED

Meaning

SSCM: Static Subsystem Catalog Management.