Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0000 BS2000 REMOTE BATCH MONITORING
Meaning
The system is ready to accept input from the remote batch terminal.
It is output after a dial-in connection is established
or after a message of job output termination.
Response
The user may submit input to the RBP system any time
after receipt of this message.
RBP0001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0001 COMMAND ACCEPTED (&00)
Meaning
The actual message contents is described as follows:
"R001 COMMAND ACCEPTED (command).".
This message acknowledges the acceptance and processing
of a valid batch processing
command.
RBP0002
Destination: USER-TASK, CONSOLE Routing code: I Weight: 99
Warranty : NO
RBP0002 JOB ACCEPTED (&00)
Meaning
The actual message contents is described as follows:
"R002 JOB ACCEPTED (jobname) (user identification) (alternate) (TSN)".
This message acknowledges the receipt of a job. The job (jobname)
submitted by the user (user identification) with optional alternate
output recipient (alternate) has
been submitted for execution.
RBP0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0003 JOB COMPLETED (&00)
Meaning
The actual message contents is described as follows:
"R003 JOB COMPLETED (jobname) (user identification) (alternate) (TSN)".
This message acknowledges that the batch job (jobname) submitted by the
user (user identification) with optional alternate output
recipient (alternate) has completed execution.
Response
If "immediate" job output was requested, it will be queued to the
submitting batch terminal or central printer automatically by the
system. If "deferred" job output was requested,
the submitting or the alternate user must retrieve
the output with an ROUT command.
RBP0004
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0004 (&00): OUTPUT AVAILABLE FOR (&01) FROM (&02)
Meaning
The output from a job which was submitted
to a remote batch terminal (&02) "terminal identification"
is available for an inactive user (&01) "user identification".
Response
The central operator should contact the
user and advise of pending job output.
RBP0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0005 RLOGOFF EFFECTED BY THE SYSTEM
Meaning
This message is issued when a batch
processing session is not terminated by an
RLOGOFF command.
RBP0006
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0006 (&00)
Meaning
The actual message contents is described as follows:
"R006 JOB:(jobname) (user identification) (terminal identification)
(alternate) STATUS:(status).".
This message is output in response to
the RSTATUS command. It advises the status
of a job (jobname) submitted by the user
(user identification) from the batch terminal (terminal
identification) with optional alternate output recipient
(alternate).
RBP0007
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0007 JOB DELETED (&00)
Meaning
The actual message contents is described as follows:
"R007 JOB DELETED (jobname) (user identification) (alternate) (TSN)".
This message is issued in response to an
ROUT command with DELETE-parameter. It advises that
a job (jobname) submitted by the (user identification)
with alternate output recipient (alternate) has been
deleted from the system.
RBP0008
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0008 (&00)
Meaning
The actual message contents is described as follows:
"R008 HHMM FROM:(user identification) (terminal identification)
TO:(user identification) (terminal identification) Message:(message).".
This message is generated by the RMSG
command processor. HHMM is the time
(hours-minutes) at which the /RMSG command
was accepted by the RBP system.
RBP0009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0009 FORM '(&00)' DOES NOT EXIST IN SPOOL PARAMETER FILE FOR REMOTE STATION 8415/8418
Meaning
The FORM specified in the /PRINT-FILE or /PRINT command or in the
PRNT macro does not exist in the SPOOL parameter file for the
remote station 8415/8418.
If the form exists for a central printer the print is redirected to it.
Response
Include the form (&00) in the SPOOL parameter file for
remote station 8415/8418.
RBP0010
Destination: USER-TASK, CONSOLE Routing code: I Weight: 99
Warranty : NO
RBP0010 JOB REJECTED UNDEFINED ENTRY (&00)
Meaning
The actual message contents is described as follows:
1.) "R010 JOB REJECTED UNDEFINED ENTRY (jobname)
(user identification) (alternate).".
2.) "R010 JOB REJECTED UNDEFINED ENTRY (R-command)"
The first form of the message is output
if a RJOB command is not immediately
followed by a job (LOGON).
The second form of the message is output
if the system is expecting a job or
batch processing command and, instead,
receives an undefined entry.
In both cases, the system ignores all
input until it receives a valid job or
batch processing command.
Response
Correct input deck and resubmit.
RBP0011
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0011 JOB REJECTED. SYSTEM RESOURCE UNAVAILABLE
Meaning
The actual message contents is described as follows:
"R011 JOB REJECTED. SYSTEM RESOURCE UNAVAILABLE (/LOGON command).".
The job, identified by the /SET-LOGON-PARAMETERS or /LOGON command,
was rejected because the system could not catalog or allocate the
disc file memory required to SPOOLIN the job.
This message is also output under some system component failure
conditions.
In both cases, the RBP facility continues to look for job and batch
processing command input.
Response
Resubmit the job.
RBP0012
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0012 JOB REJECTED. LOGON INVALID.
Meaning
The actual message contents is described as follows:
"R012 JOB REJECTED. LOGON INVALID (/LOGON command).".
The job, identified by the /LOGON command
was rejected because one or more of the
command operands is invalid.
Response
Correct the /LOGON command and resubmit the job.
RBP0013
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0013 JOB REJECTED. PASSWORD INVALID (&00)
Meaning
The specified password in the command
is invalid
(&00): Command image.
Response
Correct the password and retry.
RBP0014
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0014 JOB REJECTED INSUFFICIENT CPU TIME (&00)
Meaning
There is no more CPU time available
for the user under the specified account number.
(&00): Command image.
Response
Please call the central administrator
to add some CPU Time under that account
number.
RBP0015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0015 SYSTEM SHUTDOWN - REMOTE BATCH TERMINATING
Meaning
The system operator has issued a /SHUTDOWN command,
and the system is about to shut down.
RBP0016
Destination: CONSOLE Routing code: I Weight: 99
Warranty : NO
RBP0016 JOB REJECTED. INCOMPLETE JOB '(&00)'
Meaning
An EOT has been received during SPOOLIN Data (Device Type= 740 RCA).
Response
Retry job.
RBP0017
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0017 CLOSE ERROR ON FILE (&00) ON REMOTE STATION (&01)
Meaning
SPOOLOUT task received CLOSE error
while trying to close
the file (&00) destinated to remote
station (&01).
(&00): filename
(&01): logical station name.
RBP0018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0018 MONITORING JOB VARIABLE (&00) NOT ACCESSIBLE. REASON IS: (&01). PROCESSING CONTINUES
Meaning
The JOB VARIABLE with which the task is associated is not
accessible. The state of the task is/was not indicated. As
MONITORING JOB VARIABLE (&00) the JOB VARIABLE name given in the
"MONJV" parameter is inserted. As REASON a return code of the
JVS is inserted. Replacing the leftmost "0" with "J" delivers the
corresponding message ID. At the 2nd occurrence of the message due
to an analogous command (i.e. at /LOGOFF due to the /LOGON with
"MONJV=" parameter) an "FFFF" as REASON indicates that the REASON
from the first time just has been inherited.
RBP0019
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0019 (&00) ERROR: (&01) ON REMOTE STATION (&02)
Meaning
An error occurred during the process.
(&00): type of error
: DMS: DMS error;
: INH: after SSVINH call;
(&01): DMS --> all DMS error code.
: INH --> X'01' UNKNOWN Operation code
X'02' UNKNOWN FCB Type
X'04' Inadequate Operation code
X'08' A(file-Name) = 0
X'10' L(file-Name) = 0
X'20' Incorrect FCB type
X'40' REQM or RELM error
X'80' SETL ERROR
(&02): logical station name.
RBP0020
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0020 COMMAND REJECTED OPERAND ERROR (&00)
Meaning
The actual message contents is described as follows:
"R020 COMMAND REJECTED OPERAND ERROR (&00).".
This message advises that the operand
field of a batch command (&00) is incorrect.
The system does not process this command (&00),
but continues with the next entry in the
input stream.
Response
Determine the operand in error, correct,
and resubmit the command (&00).
RBP0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0021 COMMAND REJECTED RSTART REQUIRED (&00)
Meaning
An RSTART command must be the first command submitted
at an inactive batch terminal. The system continues to
ignore all entries in the input stream until
a valid RSTART command is detected.
(&00): Rejected command.
Response
The user must submit a valid RSTART command.
RBP0022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0022 COMMAND REJECTED RLOGON REQUIRED (&00)
Meaning
A user must be identified to the system through an
RLOGON command before any job input or utility commands
(ROUT, RMSG, RSTATUS) are accepted by the system.
The system continues to ignore all entries in the input
stream until a valid RLOGON or RSTOP command is detected.
(&00): Rejected command.
Response
The user must submit a valid RLOGON command.
RBP0023
Destination: USER-TASK, CONSOLE Routing code: I Weight: 99
Warranty : NO
RBP0023 COMMAND REJECTED ILLOGICAL SEQUENCE (&00)
Meaning
The actual message contents is described as follows:
"R023 COMMAND REJECTED ILLOGICAL SEQUENCE (&00).".
This message identifies a command (&00) in the
input stream which has no meaning to the
system because of its position in the
stream or because it has been input through
a central card reader and is valid only if
entered through a remote batch terminal.
Response
Correct the command sequence and reenter.
RBP0024
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0024 COMMAND REJECTED RESOURCE UNAVAILABLE (&00)
Meaning
The actual message contents is described as follows:
"R024 COMMAND REJECTED RESOURCE UNAVAILABLE (&00).".
This message is output if a system
component fails during the processing
of a command.
Response
If the system is operational, an attempt
may be made to reenter the command.
RBP0025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0025 BS2000 REMOTE STATION ALREADY CONNECTED
Meaning
The station which is specified in the command /RSTART station-name, is
already connected to another remote station.
Response
- Retry the command with another allowed station name, other
- wait for disconnection of the wanted station.
RBP0026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0026 FORM PARAMETER DOES NOT EXIST FOR RBP IN SPOOL PARAMETER FILE. COMMAND REJECTED
Meaning
The form specified in the /RSTART command or the default value 'STD...' is
not defined for RBP station in the SPOOL parameter file.
Response
- Use /RSTART command with a form name existing in the SPOOL parameter
file
or
- ask the SPOOL administrator to add the form desired
into the SPOOL.PARAMETERS file for RBP station (8415/8418).
RBP0027
Destination: USER-TASK, CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0027 INTERNAL ERROR DURING PROCESSING IN MODULE (&00). RBP TERMINATED FOR THIS TASK
Meaning
An internal error occurred during RBP processing of a spoolout.
The operator receives a message to indicate the reason of the error.
RBP0030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0030 COMMAND REJECTED JOB OUTPUT RESERVED BY SUBMITTER (&00)
Meaning
This message is sent to an alternate output
recipient who is attempting to claim
job output through ROUT command. The deferred
output has already been claimed
by the submitting user.
RBP0031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0031 COMMAND REJECTED JOB OUTPUT RESERVED BY ALTERNATE (&00)
Meaning
This message is sent to a user who
submitted a job and is attempting to
claim job output through an ROUT command.
The deferred output has already been
claimed by the alternate output recipient.
RBP0032
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0032 COMMAND REJECTED JOB EXECUTING (&00)
Meaning
This message is sent to a user who is
attempting to claim output from a job
that is still executing. Deferred job
can not be claimed until a job has finished
execution.
Response
The user must wait for job completion
before claiming output.
RBP0033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0033 CMD REJECTED: OUTPUT FOR CENTRAL SITE (&00)
Meaning
This message is sent to a remote user who is attempting to claim output
that has been already directed to a central printer via the command (&00).
RBP0034
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0034 COMMAND REJECTED JOB NOT IN SYSTEM (&00)
Meaning
The actual message contents is described as follows:
"R034 COMMAND REJECTED JOB NOT IN SYSTEM (&00).".
This message is sent to a user who is
requesting service for a job that is
not in the system. If the job was in the
system prior to the processing of this
command, the message implies that job
output has completed and all references to
the job have been deleted.
RBP0035
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0035 COMMAND REJECTED INVALID RECIPIENT (&00)
Meaning
The actual message contents is described as follows:
"R035 COMMAND REJECTED INVALID RECIPIENT (&00).".
This message is sent to a user who is
requesting service for a job that was not
submitted by him or did not specify him
as a valid output recipient.
RBP0036
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0036 COMMAND REJECTED INACTIVE ADDRESS (&00)
Meaning
The actual message contents is described as follows:
"R036 COMMAND REJECTED INACTIVE ADDRESS (&00).".
This message is sent to a user who has
attempted to contact an inactive user
or batch terminal through the RMSG command.
RBP0037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0037 COMMAND REJECTED NO JOB OUTSTANDING (&00)
Meaning
No jobs outstanding for user identification requesting RSTATUS.
RBP0040
Destination: CONSOLE Routing code: I Weight: 99
Warranty : NO
RBP0040 SPOOLIN TERMINATED RESOURCE UNAVAILABLE
Meaning
The actual message contents is described as follows:
"R040 SPOOLIN TERMINATED RESOURCE UNAVAILABLE.".
This message is output if a system component
fails during the initialization of
the Remote Batch SPOOLIN task.
Response
If the system is operational, an attempt
may be made to retry the /START-CARD-INPUT resp. /RCARD command.
RBP0041
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0041 SPOOLIN TERMINATED. COULD NOT ACQUIRE CARD READER
Meaning
This message is output if all of the central card readers are logically
allocated to one or more system tasks.
Response
Wait until a card reader is available.
RBP0050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0050 REMOTE STATION NOT IDENTIFIED
Meaning
The batch terminal has not been identified with a
valid id or with a valid id which is already in use.
Response
Enter a valid terminal identification.
RBP0051
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0051 BSET FILE ERROR
Meaning
I/O error encountered in updating BSET file.
Response
May be ignored or system may be shutdown.
RBP0052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0052 BJET FILE ERROR
Meaning
I/O error encountered in updating BJET file.
Response
May be ignored or system may be shutdown.
RBP0061
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0061 (&00): LINE NOT IN SID TABLE
Meaning
The line of the remote terminal cannot be found.
Response
Verify the generation of the system.
RBP0062
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0062 (&00): NO BSET IN MEMORY
Meaning
There is no batch station entry table in the system.
Response
Verify the generation of the system.
RBP0063
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0063 (&00): NO RBP MODULES IN SYSTEM
Meaning
There are no RBP modules in the system.
Response
Verify the generation of the system.
RBP0064
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0064 (&00): REQM ERROR
Meaning
REQM error during initialization of remote SPOOLIN processing.
(&00)= SPIN: Message from module ECRBSPIN
RBP0065
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0065 (&00): RBP BUFFER REQM ERROR
Meaning
REQM error during allocation of RBP work area.
(&00): SPIN: Message from module ECRBSPIN.
RBP0066
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0066 (&00): BUFFER ERROR
Meaning
Error during access to the RBP buffer.
RBP0067
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0067 (&00): EAM OPEN ERROR
Meaning
The reopen of the EAM file can not be done.
Response
This message can be ignored but no printing of this file will be done.
RBP0068
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0068 (&00): EAM READ ERROR
Meaning
Error during GET operation of an EAM block.
Response
This message can be ignored.
RBP0069
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0069 (&00): EAM CLOSE ERROR
Meaning
Error during CLOSE Operation of an EAM file.
Response
This message can be ignored.
RBP0070
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0070 (&00): BATCH STATION ENTRY ERROR
Meaning
The PUT into the batch station entry table cannot be correctly processed.
The task is terminated through $TRMT 0050.
(&00)= SMSG: message from routine ECLRSMSG
in module ECLRSPPS.
Response
It is advised to halt the system and take a dump.
RBP0071
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0071 (&00): QUEUE ERROR
Meaning
The PUT into the batch station entry table or
the closing of a queue can not be processed.
(&00)= SPPS: Message from module ECLRSPPS.
Response
It is advised to stop the system and take a dump.
RBP0072
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0072 (&00): BATCH JOB ENTRY ERROR
Meaning
The access to the BJE (batch job entry table) can not be correctly
processed. The task is terminated through $TRMT 0050.
Response
It is advised to halt the system and take a dump.
RBP0073
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0073 (&00): RELM MSG. BUFFER ERROR
Meaning
The message buffer can not be correctly released.
Response
This message can be ignored.
RBP0074
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
RBP0074 (&00): RELM WORK AREA ERROR
Meaning
The work area can not be correctly released.
Response
This message can be ignored.
RBP0075
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0075 (&00): START RBP TERMINATION
Meaning
The termination processing is started.
RBP0076
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0076 (&00) *** WARNING: BJET IS FILLED UP
Meaning
The 199 entries of the BJET are in use.
Response
The operator has to stop immediately central spoolin,
to set RBPLMT to 0 with a BIAS command, to warn the
interactive users not to use print's with remote
destination and to wait that the output processing
has freed some entries.
RBP0081
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0081 SYNTACTICAL ERROR. /RDIR CMD REJECTED
Meaning
As there is only one parameter in the /RDIR command, the only
possible reason is that the terminal identification has a wrong
syntax.
Response
Reenter the command /RDIR with a correct terminal identification.
RBP0082
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0082 USER IS NOT ALLOWED TO USE /RDIR CMD. CMD REJECTED
Meaning
The current user must be the SPOOL administrator to be
allowed to work with the /RDIR command.
RBP0083
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0083 NO OUTSTANDING OUTPUT FOR STATION '(&00)'. COMMAND IGNORED
Meaning
/REDIRECT-PRINT-JOB command is not processed.
RBP0084
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0084 COMMAND ACCEPTED. (&00) PRINTS LINKED TO REMOTE STATION '(&01)' REDIRECTED TO CENTRAL PRINTER
Meaning
The /REDIRECT-PRINT-JOB command is processed.
All non deferred printouts destinated to the remote station (&01) are
redirected to a central printer.
(&00): number of prints
(&01): logical name of the remote station.
RBP0085
Destination: CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0085 BEGIN OF WORK SESSION FOR USER (&00) ON REMOTE STATION (&01) (&02) (&03)
Meaning
Warns the operator who is working at the remote station defined by
its logical name, processor name and station name.
RBP0086
Destination: USER-TASK, CONSOLE Routing code: P Weight: 99
Warranty : NO
RBP0086 SPECIFIED TSN ALREADY BEING SPOOLED OUT. /PRIORITY COMMAND IGNORED
Meaning
The attempt to change the priority level is rejected as spoolout has
already commenced.
RBP0087
Destination: USER-TASK, CONSOLE Routing code: N Weight: 99
Warranty : NO
RBP0087 DEVICE ID UNKNOWN. COMMAND REJECTED
Meaning
The device ID specified in the /REDIRECT-PRINT-JOB command
is not contained in the BSET (Batch Station Entry Table).
RBP0088
Destination: USER-TASK, CONSOLE Routing code: R Weight: 99
Warranty : NO
RBP0088 "EQUISAM" CORRUPTION
Meaning
The EQUISAM queue is corrupted and the print requests cannot be
redirected to the central printer.
RBP0089
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0089 USER ALREADY CONNECTED. CMD REJECTED (&00)
Meaning
The user specified in the /RLOGON command (&00) is
already connected on another remote station.
The system continues with the next entry in the input
stream.
Response
Wait for disconnection of the user on the other
remote station before resubmitting the command.
RBP0090
Destination: USER-TASK, CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0090 THE SPOOL ADMINISTRATOR TASK DID NOT REPLY WITHIN TIME LIMIT. RETRY COMMAND LATER
Meaning
The SPOOL administrator task is locked. The command /REDIRECT-PRINT-JOB
cannot be processed.
This can occur if the administrator task is in crash and the operator does
not react to the message.
RBP0091
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0091 CARD READER (&00) HAS BEEN RELEASED
Meaning
The card reader has been released by the operator using the command
/RC UNIT=MN,CYCLE=NO.
(&00): mnemonic device name of the card reader.
RBP0092
Destination: CONSOLE Routing code: S Weight: 99
Warranty : NO
RBP0092 DEVICE (&00) NOT ASSIGNED TO SYSTEM
Response
Spoolout cannot continue until the operator has assigned the device to
the system using the appropriate ATTACH command.
RBP0501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
RBP0501 SPOOL QUEUE MANAGER INTERNAL ERROR (&00). ABNORMAL TASK TERMINATION CALLED
Meaning
(&00): 0001 EQS failure (SEQMGET)
0002 EQS failure (SEQMMOC)
0003 EQS failure (SEQMDEL)
0004 EQS failure (SEQMADD)
0010 Memory pools failure (ENAMP)
0011 Memory pools failure (SSVMPFF)
0012 Memory pools failure (DISMP)
0020 Bourse mechanism failure ($NENQBO)
Response
See System-dump.