Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMYCCXX DCAM RETURN CODE X'CCXX....': CALL REJECTED BY THE SYSTEM EXIT ROUTINE
Meaning
Selfexplanatory.
Response
Ask the system administrator for the meaning of the second byte.
OMYCC00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMYCC00 DCAM RETURN CODE X'CC00....': CALL REJECTED BY THE SYSTEM EXIT ROUTINE
Meaning
Selfexplanatory.
Response
Not given.
OMYFFFF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMYFFFF DCAM LOSCON CONTINGENCY RETURN CODE
Meaning
Meaning of the right byte of register 6:
00, Connection cleared down by partner.
08, Processing error (e.g. X.25 malfunction).
0C, Partner no longer available or data station failure.
10, Connection aborted by network administrator.
14, Connection interrupted in network.
18, Network error.
20, Warning before connection loss.
28, Connection closed by system administration.
2C, Error in connection element of station services.
Response
34: Error in station service protocol.
38, Error in transport system.
40, Error in connection message from station service for user.
50, Proposed transport services class not accepted by partner.
54, Proposed priority in data network not accepted by partner.
58, Disconnection due to shortage of DCM memory (too many negative
transport acknowledges not fetched).
5C, VTSU of partner not active.
60, Transport connection closed due to protocol error of partner.
1C/24/30/3C/44/48/4C, Reserved.
Reestablish the connection; if necessary inform the network
administrator.
OMY0CAC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CAC DCAM RETURN CODE X'0CAC....': APPLICATION NAME DOES NOT START WITH '$'
Meaning
Selfexplanatory.
Response
Not given.
OMY0CA0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CA0 DCAM RETURN CODE X'0CA0....': DISCONNECTION BY PARTNER DUE TO PROTOCOL ERROR OR INCONSISTENCY
Meaning
Selfexplanatory.
Response
Not given.
OMY0CA4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CA4 DCAM RETURN CODE X'0CA4....': OPTCD=EXPRESS NOT ALLOWED SINCE NOT AGREED UPON WITH PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0CA8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CA8 DCAM RETURN CODE X'0CA8....': UNRECOVERABLE UCON ERROR
Meaning
Selfexplanatory.
Response
Not given.
OMY0CBC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CBC DCAM RETURN CODE X'0CBC....': INTERNAL UCON ERROR (AUTHENTICITY CHECK NOT POSSIBLE)
Meaning
Selfexplanatory.
Response
Not given.
OMY0CB0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CB0 DCAM RETURN CODE X'0CB0....': PROCESSOR NAME DOES NOT DESIGNATE THE OWN (HOME) PROCESSOR
Meaning
Selfexplanatory.
Response
Not given.
OMY0CB4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CB4 DCAM RETURN CODE X'0CB4....': SUPERVISOR TASK CAN NOT BE CREATED
Meaning
Selfexplanatory.
Response
Not given.
OMY0CB8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CB8 DCAM RETURN CODE X'0CB8....': WRONG CONNECTION IDENTIFIER (CID) FOR THIS OPERATION IDENTIFIER (OPID)
Meaning
Selfexplanatory.
Response
Not given.
OMY0CCC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CCC DCAM RETURN CODE X'0CCC....': PROTOCOL INCONSISTENCY
Meaning
Selfexplanatory.
Response
Not given.
OMY0CC0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CC0 DCAM RETURN CODE X'0CC0....': NO FREE ENTRY IN CONSOLE NAME TABLE AVAILABLE
Meaning
Selfexplanatory.
Response
Not given.
OMY0CC4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CC4 DCAM RETURN CODE X'0CC4....': DCAM VERSION LESS THAN 10
Meaning
Selfexplanatory.
Response
Not given.
OMY0CC8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CC8 DCAM RETURN CODE X'0CC8....': PARTNER IS NO CHIP CARD TERMINAL
Meaning
Selfexplanatory.
Response
Not given.
OMY0CD0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CD0 DCAM RETURN CODE X'0CD0....': SUBSYSTEM FOR CHIP CARD CHECK NOT AVAILABLE
Meaning
Selfexplanatory.
Response
Not given.
OMY0CD4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0CD4 DCAM RETURN CODE X'0CD4....': ERROR IN KVP PROTOCOL
Meaning
Selfexplanatory.
Response
Not given.
OMY0C0C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C0C DCAM RETURN CODE X'0C0C....': A CONNECTION REQUEST FROM THIS PARTNER IS ALREADY ENQUEUED (NO YOPNCON OPTCD=ACQUIRE POSSIBLE)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C00 DCAM RETURN CODE X'0C00....': CALL REJECTED DUE TO CURRENT STATE OF PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C04
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C04 DCAM RETURN CODE X'0C04....': PARTNER IS NOT CONNECTED TO THE DCAM APPLICATION (INVALID CID)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C08
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C08 DCAM RETURN CODE X'0C08....': PARTNER IS ALREADY CONNECTED TO THE DCAM APPLICATION
Meaning
Selfexplanatory.
Response
Not given.
OMY0C1C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C1C DCAM RETURN CODE X'0C1C....': FORCED DISCONNECTION RESP. DISCONNECTION REQUESTED BY PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C10
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C10 DCAM RETURN CODE X'0C10....': DIP CONTROL BLOCK NOT ACTIVE (INVALID DID)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C14
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C14 DCAM RETURN CODE X'0C14....': INVALID LID
Meaning
Selfexplanatory.
Response
Not given.
OMY0C18
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C18 DCAM RETURN CODE X'0C18....': DISCONNECTION DUE TO USER REQUEST OR YCLSCON
Meaning
Selfexplanatory.
Response
Not given.
OMY0C2C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C2C DCAM RETURN CODE X'0C2C....': PARTNER IS IN STATE CA. YRECEIVE OPTCD=SPEC NOT ALLOWED
Meaning
Selfexplanatory.
Response
Not given.
OMY0C20
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C20 DCAM RETURN CODE X'0C20....': PARTNER IS IN STATE CS AND THE TRANSITION TO STATE CA IS NOT YET COMPLETED (OR VICE VERSA)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C24
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C24 DCAM RETURN CODE X'0C24....': PARTNER IS IN STATE CS WITH OUTSTANDING YRECEIVE CALLS. THE REQUESTED TRANSITION TO STATE CA IS NOT ALLOWED
Meaning
Selfexplanatory.
Response
Not given.
OMY0C28
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C28 DCAM RETURN CODE X'0C28....': PARTNER IS IN STATE CS FOR ANOTHER PROCESS
Meaning
Selfexplanatory.
Response
Not given.
OMY0C3C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C3C DCAM RETURN CODE X'0C3C....': OPTCD=EXPRESS NOT ALLOWED WITH EDIT=SYSTEM
Meaning
Selfexplanatory.
Response
Not given.
OMY0C30
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C30 DCAM RETURN CODE X'0C30....': MESSAGE TOO LONG (GREATER THAN MAXLN=)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C34
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C34 DCAM RETURN CODE X'0C34....': POSITION OF THE DISTRIBUTIONCODE EXCEEDS THE MAXIMUM MESSAGE LENGTH
Meaning
Selfexplanatory.
Response
Not given.
OMY0C38
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C38 DCAM RETURN CODE X'0C38....': SEQUENCE NUMBER ALREADY IN USE AND ACKNOWLEDGE PROCESSING NOT COMPLETED
Meaning
Selfexplanatory.
Response
Not given.
OMY0C4C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C4C DCAM RETURN CODE X'0C4C....': PARTNER NOT ACCESSIBLE (THE APPLICATION IS NOT OPENED)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C40
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C40 DCAM RETURN CODE X'0C40....': CONNECTION REQUEST REJECTED BY PARTNER WITHOUT SPECIFICATION OF A REASON
Meaning
Selfexplanatory.
Response
Not given.
OMY0C44
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C44 DCAM RETURN CODE X'0C44....': INVALID COMBINATION OF DEPROT= AND EDIT=
Meaning
Selfexplanatory.
Response
Not given.
OMY0C48
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C48 DCAM RETURN CODE X'0C48....': SYSTEM TIMEOUT FOR CONNECTION REQUEST
Meaning
Selfexplanatory.
Response
Not given.
OMY0C5C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C5C DCAM RETURN CODE X'0C5C....': CONNECTION REQUEST REJECTED BY PARTNER (YREJLOG)
Meaning
Meaning of the third byte (only for ISO connection):
18, Erroneous connection request.
2C, Partner rejects connection request.
40, Connection request rejected.
Response
Not given.
OMY0C50
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C50 DCAM RETURN CODE X'0C50....': PARTNER DOES NOT PROCESS CONNECTION REQUESTS (THE APPLICATION IS IN STOP STATE)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C54
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C54 DCAM RETURN CODE X'0C54....': PARTNER DOES NOT ACCEPT CONNECTION REQUESTS (THE APPLICATION IS CREATED WITH ATTR=NLOGON)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C58
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C58 DCAM RETURN CODE X'0C58....': INVALID LOGON-PASSWORD (LOGPW=)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C6C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C6C DCAM RETURN CODE X'0C6C....': ERROR IN ACTIVATION OF VTSU SUPPORT OF PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C60
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C60 DCAM RETURN CODE X'0C60....': PARTNER CHARACTERICS NOT ACCEPTED BY PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C64
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C64 DCAM RETURN CODE X'0C64....': ERROR IN STATION SERVICE PROTOCOL
Meaning
Selfexplanatory.
Response
Not given.
OMY0C68
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C68 DCAM RETURN CODE X'0C68....': PARTNER DOES NOT PROCESS CONNECTION REQUESTS. A CONNECTION REQUEST BY PARTNER FOLLOWS
Meaning
Selfexplanatory.
Response
Not given.
OMY0C7C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C7C DCAM RETURN CODE X'0C7C....': RESERVED
Meaning
Selfexplanatory.
Response
Not given.
OMY0C70
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C70 DCAM RETURN CODE X'0C70....': PARTNER BELONGS TO ANOTHER DCAM-APPLICATION
Meaning
Selfexplanatory.
Response
Not given.
OMY0C74
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C74 DCAM RETURN CODE X'0C74....': DIP CONTROL BLOCK DOES NOT ADDRESS A DCG CONTROL BLOCK
Meaning
Selfexplanatory.
Response
Not given.
OMY0C78
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C78 DCAM RETURN CODE X'0C78....': CONNECTION TERMINATED BY PARTNER OR SYSTEM IMMEDIATELY AFTER COMPLETION OF CONNECTION REQUEST
Meaning
Selfexplanatory.
Response
Not given.
OMY0C8C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C8C DCAM RETURN CODE X'0C8C....': INVALID PASSWORD (UCON)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C80
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C80 DCAM RETURN CODE X'0C80....': SYNTAX ERROR IN CONNECTION LETTER (UCON)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C84
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C84 DCAM RETURN CODE X'0C84....': UNKNOWN AUTHORIZATION NAME (UCON)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C88
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C88 DCAM RETURN CODE X'0C88....': AUTHORIZATION NAME ALREADY IN USE (UCON)
Meaning
Selfexplanatory.
Response
Not given.
OMY0C9C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C9C DCAM RETURN CODE X'0C9C....': CONNECTION REQUEST REJECTED BY THE SYSTEM ADMINISTRATION
Meaning
Selfexplanatory.
Response
Ask the system administrator.
OMY0C90
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C90 DCAM RETURN CODE X'0C90....': PROPOSED TRANSPORT SERVICE CLASS REJECTED BY PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C94
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C94 DCAM RETURN CODE X'0C94....': PROPOSED NET PRIORITY REJECTED BY PARTNER
Meaning
Selfexplanatory.
Response
Not given.
OMY0C98
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0C98 DCAM RETURN CODE X'0C98....': GENERAL ERROR (E.G. X.25 FAILURE)
Meaning
Selfexplanatory.
Response
Not given.
OMY0000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0000 DCAM RETURN CODE X'0000....': CALL COMPLETED OR ACCEPTED
Meaning
Meaning of the third byte:
00, Message fitts in buffer resp. calling task is the primary process.
04, Message too long resp. calling task is the secondary process.
08, Message too long; remainder is kept.
10, VTSU control block not transferred; connection works without VTSU
control block.
40, State of TD9763 not completely transferred.
80, State of TD9763 completely transferred.
In the forth byte the single bits have the following meaning:
01, Message is a letter.
02, GO signal.
Response
04/08: Transport acknowledge positive/negative.
10, An express message has arrived.
20/40/80, Element/Subgroup/Group of message arrived (NEA connection).
20, More data of message follows (ISO connection).
80, No more data of message follows (ISO connection).
Not given.
OMY0400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0400 DCAM RETURN CODE X'0400....': CALL COMPLETED WITH WARNING
Meaning
Meaning of the third byte:
04, Contradiction in code specifications.
08, No letter has arrived (OPTCD=NQ).
0C, No LOGON request in queue.
10, Time out (TOVAL=).
14/18, System time out (/BCTIMES).
20, Connection letter truncated.
24, Error in VTSU.
28, Partner characteristic truncated.
2C, Edited message too long.
Response
30: Invalid edit options.
34, Call terminated by YRESET.
44, No printer operable for output.
48, Invalid control character (NL) entered in extended line mode.
The meaning of the forth byte see under 'OMY0000'.
Not given.
OMY080C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY080C DCAM RETURN CODE X'080C....': DCAM APPLICATION ALREADY OPENED AND ONLY USABLE BY ONE TASK
Meaning
Selfexplanatory.
Response
Not given.
OMY0800
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0800 DCAM RETURN CODE X'0800....': CALL REJECTED DUE TO CURRENT STATE OF THE DCAM APPLICATION
Meaning
Selfexplanatory.
Response
Not given.
OMY0804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0804 DCAM RETURN CODE X'0804....': DCAM APPLICATION NOT OPENED BY THE CALLING TASK (INVALID AID)
Meaning
Selfexplanatory.
Response
Not given.
OMY0808
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0808 DCAM RETURN CODE X'0808....': DCAM APPLICATION ALREADY OPENED AND ATTR=NSHARE SPECIFIED
Meaning
Selfexplanatory.
Response
Not given.
OMY081C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY081C DCAM RETURN CODE X'081C....': DISTRIBUTION NAME OR DISTRIBUTION CODE ALREADY USED
Meaning
Selfexplanatory.
Response
Not given.
OMY0810
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0810 DCAM RETURN CODE X'0810....': DCAM APPLICATION ALREADY OPENED BY THE CALLING TASK
Meaning
Selfexplanatory.
Response
Not given.
OMY0814
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0814 DCAM RETURN CODE X'0814....': DCAM APPLICATION ALREADY OPENED AND VERIFY=PRIMARY SPECIFIED
Meaning
Selfexplanatory.
Response
Not given.
OMY0818
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0818 DCAM RETURN CODE X'0818....': DCAM APPLICATION NOT OPENED AND VERIFY=SECONDARY SPECIFIED
Meaning
Selfexplanatory.
Response
Not given.
OMY082C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY082C DCAM RETURN CODE X'082C....': FORCED TERMINATION OF DCAM APPLICATION DUE TO INVALID CONTINGENCY OR EVENT ITEM SPECIFIED BY THE PRIMARY PROCESS.
Meaning
Selfexplanatory.
Response
Not given.
OMY0820
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0820 DCAM RETURN CODE X'0820....': FORCED TERMINATION OF DCAM APPLICATION (WARNING)
Meaning
Selfexplanatory.
Response
Not given.
OMY0824
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0824 DCAM RETURN CODE X'0824....': FORCED TERMINATION OF DCAM APPLICATION
Meaning
Selfexplanatory.
Response
Not given.
OMY0828
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0828 DCAM RETURN CODE X'0828....': FORCED TERMINATION OF DCAM APPLICATION DUE TO DCAM ERROR
Meaning
Selfexplanatory.
Response
Not given.
OMY083C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY083C DCAM RETURN CODE X'083C....': TERMINATION OF THE DCAM APPLICATION DUE TO REQUEST OF THE SECONDARY PROCESS.
Meaning
Selfexplanatory.
Response
Not given.
OMY0830
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0830 DCAM RETURN CODE X'0830....': FORCED TERMINATION OF DCAM APPLICATION DUE TO INVALID CONTINGENCY OR EVENT ITEM SPECIFIED BY THE SECONDARY PROCESS.
Meaning
Selfexplanatory.
Response
Not given.
OMY0834
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0834 DCAM RETURN CODE X'0834....': FORCED TERMINATION OF DCAM APPLICATION DUE TO TERMINATION OF THE PRIMARY PROCESS.
Meaning
Selfexplanatory.
Response
Not given.
OMY0838
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0838 DCAM RETURN CODE X'0838....': TERMINATION OF THE DCAM APPLICATION DUE TO REQUEST OF THE PRIMARY PROCESS.
Meaning
Selfexplanatory.
Response
Not given.
OMY084C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY084C DCAM RETURN CODE X'084C....': TOO MANY DCAM APPLICATIONS OPENED BY THIS TASK
Meaning
Selfexplanatory.
Response
Not given.
OMY0840
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0840 DCAM RETURN CODE X'0840....': TOO MANY SIMULTANEOUS CALLS OF THE SAME TYPE FOR THIS TASK
Meaning
Selfexplanatory.
Response
Not given.
OMY0844
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0844 DCAM RETURN CODE X'0844....': DCAM APPLICATION NOT ACTIVE
Meaning
Selfexplanatory.
Response
Not given.
OMY0848
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0848 DCAM RETURN CODE X'0848....': INVALID PASSWORD (USEPW=)
Meaning
Selfexplanatory.
Response
Not given.
OMY085C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY085C DCAM RETURN CODE X'085C....': TOO MANY NOT PREDEFINED DCAM APPLICATIONS
Meaning
Selfexplanatory.
Response
Not given.
OMY0850
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0850 DCAM RETURN CODE X'0850....': TOO MANY NOT PREDEFINED DCAM APPLICATIONS FOR A TASK
Meaning
Selfexplanatory.
Response
Not given.
OMY0854
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0854 DCAM RETURN CODE X'0854....': INVALID PASSWORD WHEN PASSWORD IN RDF GIVEN
Meaning
Selfexplanatory.
Response
Not given.
OMY0858
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0858 DCAM RETURN CODE X'0858....': DCAM APPLICATION OPENED BY OTHER SUBSYSTEM
Meaning
Selfexplanatory.
Response
Not given.
OMY0860
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0860 DCAM RETURN CODE X'0860....': TOO MANY CONNECTIONS FOR NOT PREDEFINED DCAM APPLICATION
Meaning
Selfexplanatory.
Response
Not given.
OMY0864
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY0864 DCAM RETURN CODE X'0864....': DCAM VERSION DIFFERENT FROM THE SPECIFICATION OF THE PRIMARY PROCESS
Meaning
Selfexplanatory.
Response
Not given.
OMY100C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY100C DCAM RETURN CODE X'100C....': DCM TERMINATION
Meaning
Selfexplanatory.
Response
Not given.
OMY1000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1000 DCAM RETURN CODE X'1000....': CALL REJECTED DUE TO CURRENT STATE OF THE DATA COMMUNICATION SYSTEM (DCM)
Meaning
Selfexplanatory.
Response
Not given.
OMY1004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1004 DCAM RETURN CODE X'1004....': DCM MEMORY SHORTAGE
Meaning
Meaning of the third byte:
04, BCAM: Retry i/o later.
08, BCAM: Memory shortage.
0C, DCAM: Wait for GO signal.
20, DCAM: No control block available.
24, DCAM: No ID entry available.
28, DCAM: No memory available ($REQM).
2C, DCAM: Overload in partner system.
30, DCAM: Too many events not fetched.
Response
Not given.
OMY1008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1008 DCAM RETURN CODE X'1008....': DCM TERMINATION (WARNING)
Meaning
Selfexplanatory.
Response
Not given.
OMY1010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1010 DCAM RETURN CODE X'1010....': DCM NOT ACTIVE
Meaning
Selfexplanatory.
Response
Not given.
OMY1014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1014 DCAM RETURN CODE X'1014....': DCM ERROR
Meaning
Meaning of the third byte:
04, BCAM: Unknown BCINF return code.
08, BCAM: Unknown APINF return code.
0C, BCAM: Unknown STINF return code.
10, BCAM: Unknown return code.
The forth byte contains the unknown BCAM return code.
Response
Not given.
OMY1020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1020 DCAM RETURN CODE X'1020....': DCAM TEMPORARY LOCKED
Meaning
Selfexplanatory.
Response
Not given.
OMY140C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY140C DCAM RETURN CODE X'140C....': CALL MAY NOT BE GIVEN FROM APPLICATIONS WITH ATTR=NLOGON
Meaning
Selfexplanatory.
Response
Not given.
OMY1400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1400 DCAM RETURN CODE X'1400....': A CALL WAS USED IMPROPER
Meaning
Selfexplanatory.
Response
Not given.
OMY1404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1404 DCAM RETURN CODE X'1404....': CALL MAY NOT BE GIVEN FROM A SECONDARY PROCESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1408 DCAM RETURN CODE X'1408....': CALL MAY NOT BE GIVEN FROM APPLICATIONS WITH ATTR=NSHARE OR ATTR=(SHARE,NDISCO)
Meaning
Selfexplanatory.
Response
Not given.
OMY1410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1410 DCAM RETURN CODE X'1410....': EQUAL CALLS WITH OPTCD=(ACQUIRE,ASY) OR OPTCD=(ACCEPT,ASY,SPEC) ARE ALREADY IN PROCESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1414
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1414 DCAM RETURN CODE X'1414....': DCAM APPLICATION HAS NO RIGHT FOR THIS CALL
Meaning
Selfexplanatory.
Response
Not given.
OMY1418
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1418 DCAM RETURN CODE X'1418....': A SYNCHRONOUS CALL IS ALREADY ENQUEUED FOR THIS PROCESS (OPTCD=(Q,SYN))
Meaning
Selfexplanatory.
Response
Not given.
OMY180C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY180C DCAM RETURN CODE X'180C....': INVALID DCG CONTROL BLOCK ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1800
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1800 DCAM RETURN CODE X'1800....': CALL REJECTED DUE TO ERRONEOUS OPERANDS
Meaning
Selfexplanatory.
Response
Not given.
OMY1804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1804 DCAM RETURN CODE X'1804....': INVALID APPLICATION CONTROL BLOCK ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1808
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1808 DCAM RETURN CODE X'1808....': INVALID CONNECTION CONTROL BLOCK ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY181C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY181C DCAM RETURN CODE X'181C....': INVALID DISNAME ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1810
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1810 DCAM RETURN CODE X'1810....': INVALID DIP CONTROL BLOCK ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1814
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1814 DCAM RETURN CODE X'1814....': INVALID EVENT NOTIFICATION CONTROL BLOCK ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1818
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1818 DCAM RETURN CODE X'1818....': INVALID APPNAME ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY182C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY182C DCAM RETURN CODE X'182C....': INVALID AREA ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1820
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1820 DCAM RETURN CODE X'1820....': INVALID PTNNAME ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1824
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1824 DCAM RETURN CODE X'1824....': INVALID CONTINGENCY IDENTIFIER ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1828
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1828 DCAM RETURN CODE X'1828....': INVALID EVENT ITEM IDENTIFIER ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY183C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY183C DCAM RETURN CODE X'183C....': INVALID PARTNER NAME
Meaning
Selfexplanatory.
Response
Not given.
OMY1830
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1830 DCAM RETURN CODE X'1830....': INVALID AAREA ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1834
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1834 DCAM RETURN CODE X'1834....': INVALID DCAM APPLICATION NAME
Meaning
Selfexplanatory.
Response
Not given.
OMY1838
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1838 DCAM RETURN CODE X'1838....': INVALID DISTRIBUTION CODE NAME
Meaning
Selfexplanatory.
Response
Not given.
OMY184C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY184C DCAM RETURN CODE X'184C....': AAREALN LESS THAN 8 OR AREALN IS 0
Meaning
Selfexplanatory.
Response
Not given.
OMY1840
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1840 DCAM RETURN CODE X'1840....': INVALID PROCESSOR NAME
Meaning
Possible reasons for the invalid processor name are:
a) processor name syntactical wrong.
b) processor not activated (/BCDAC or no /BCACT given).
c) processor unknown resp. not generated (/BCOUT or no /BCIN given).
d) route(s) to processor not activated (/BCDAC or no /BCACT given).
e) route(s) to processor unknown resp. not generated (/BCOUT or no
/BCIN given).
Response
Not given.
OMY1844
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1844 DCAM RETURN CODE X'1844....': CONNECTION CONTROL BLOCK ALREADY USED FOR ASYNCHRONOUS CALL
Meaning
Selfexplanatory.
Response
Not given.
OMY1848
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1848 DCAM RETURN CODE X'1848....': SEQUENCE NUMBER EXCEEDS UPPER LIMIT
Meaning
Selfexplanatory.
Response
Not given.
OMY185C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY185C DCAM RETURN CODE X'185C....': UNRECOVERABLE ERROR IN VTSU
Meaning
Meaning of the third byte:
00: EDIT parameter error (user buffer may be too small for the message
header with EDITIN=PHYS).
04, Invalid device header.
08, Message length is 0.
0C, VTSU not available.
10, Error in VTSU control block.
14, Message with error in NEABT protocol received.
Response
Not given.
OMY1850
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1850 DCAM RETURN CODE X'1850....': INVALID SUBFUNCTION
Meaning
Selfexplanatory.
Response
Not given.
OMY1854
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1854 DCAM RETURN CODE X'1854....': INVALID PRONAME ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1858
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1858 DCAM RETURN CODE X'1858....': AREALN IS NEGATIVE
Meaning
Selfexplanatory.
Response
Not given.
OMY186C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY186C DCAM RETURN CODE X'186C....': CONTRADICTION BETWEEN ACB CONTROL BLOCK PARAMETERS AND ISO=Y
Meaning
Selfexplanatory.
Response
Not given.
OMY1860
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1860 DCAM RETURN CODE X'1860....': INVALID DISTRIBUTION CODE LENGTH (CODELN=)
Meaning
Selfexplanatory.
Response
Not given.
OMY1864
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1864 DCAM RETURN CODE X'1864....': RESERVED
Meaning
Selfexplanatory.
Response
Not given.
OMY1868
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1868 DCAM RETURN CODE X'1868....': RESERVED
Meaning
Selfexplanatory.
Response
Not given.
OMY187C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY187C DCAM RETURN CODE X'187C....': INCONSISTENCY BETWEEN ROUTL= AND ROUTN=
Meaning
Selfexplanatory.
Response
Not given.
OMY1870
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1870 DCAM RETURN CODE X'1870....': NO VTSU CONTROL BLOCK EXISTS
Meaning
Selfexplanatory.
Response
Not given.
OMY1874
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1874 DCAM RETURN CODE X'1874....': VTSU CONTROL BLOCK NOT ALLOWED (EDIT=USER)
Meaning
Selfexplanatory.
Response
Not given.
OMY1878
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1878 DCAM RETURN CODE X'1878....': INVALID VCB ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY1880
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY1880 DCAM RETURN CODE X'1880....': INVALID ROUTL ADDRESS
Meaning
Selfexplanatory.
Response
Not given.
OMY2000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY2000 DCAM RETURN CODE X'2000....': ILLEGAL ADDRESS
Meaning
Possible reasons for the illegal address are:
a) invalid application control block (ACB) address.
b) invalid request control block (RPB) address.
c) request control block (RPB) used by asynchronous call.
d) invalid address or invalid contents of the parameter list.
e) invalid register number.
Response
Not given.
OMY2400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMY2400 DCAM RETURN CODE X'2400....': THE SUBSYSTEM DCAM IS NO (MORE) AVAILABLE
Meaning
The Subsystem DCAM is not created or in HOLD resp. DELETE
state and the task has not yet executed any DCAM calls.
Response
Not given.