Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0000 DEVICE NOT FOUND. COMMAND WAS NOT EXECUTED
Meaning
No additional information.
Response
Define the printer or use the correct device name.
OMP0001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0001 DEVICE LIMIT EXCEEDED. COMMAND WAS NOT EXECUTED
Meaning
Printer limit exceeded for the current processor. Command could
not be executed.
Response
Delete another printer or generate a new printer table.
OMP0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0002 WRONG DUMP ADDRESS. MESSAGE COULD NOT BE TREATED BY THE STANDARD PROP
Meaning
The standard PROP had found an error in the message. The message will be
sent to the operator.
Response
None.
OMP0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0003 ERROR ENTRY WITH ADDRESS (&00) COULD NOT BE FOUND
Meaning
No additional information.
Response
Correct the address.
OMP0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0004 (&00) ERROR (&01) OCCURRED AT ADDRESS (&02) IN MODULE (&03)
Meaning
An internal call to PROP or a call to the operating system
contains an error. The name of the call is (&00). (&01) is
the error code from R15, (&02) is the address of the call
and (&03) the module name.
Response
Notify the PROP or the system administrator.
OMP0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0005 NO MODIFICATION PARAMETER DEFINED. EVENT TABLE DEACTIVATED
Meaning
No modification parameter list defined for the event table
(see operand SDTPAR in the OPTAB macro). Event table deactivated.
Response
Correct the event table.
OMP0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0006 "(&00)" EXECUTED
Meaning
Command (&00) successfully executed.
Response
None.
OMP0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0007 MEMORY FILE IS EMPTY
Meaning
There is no error entry in the memory file PROP.MEMORY.
Response
None.
OMP0008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0008 NO DEVICE DEFINED
Meaning
The printer table contains no printer for the current processor.
Response
Define a printer or generate a new printer table.
OMP0010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0010 DEVICE TABLE WRONG OR NOT DEFINED. SPS PACKET COULD NOT BE ACTIVATED
Meaning
Printer table not defined or an error occurred during
compilation of the new printer table. The SPS packet
could not be activated without a printer table.
Response
Define a printer table or correct the current printer table.
OMP0012
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0012 WARNING: THE VERSION OF SPOOL USED IS NOT SUPPORTED BY STANDARD PROP.
Meaning
- Standard PROP has not been adapted for the SPOOL version used.
- Errors may occur in SPOOL message processing.
Response
- Notify the PROP or system administrator.
OMP0400
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0400 LENGTH OF TSN-SPECIFIC AREA INCORRECT. EVENT TABLE DEACTIVATED
Meaning
The length of the TSN area specified with the TSNAREA operand in
the OPTAB macro is less than 16 or greater than 4096. The event
table has been ignored.
Response
Correct the OPDEF entry. Recompile the event table and load it
again.
OMP0401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0401 ILLEGAL EVENT TABLE ENTRY. EVENT TABLE DEACTIVATED
Meaning
An event table contains an invalid entry (e.g. POS > 2999).
Response
Correct the OPDEF entry. Recompile the event table and load it
again.
OMP0402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0402 MEMORY MANAGEMENT ERROR. PROP DEACTIVATED
Meaning
An error occurred during the PROP management of TSN-specific areas.
PROP has been deactivated.
Response
Notify OMNIS administrator. Reload OMNIS and PROP.
OMP0403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0403 NO COMMAND PROCEDURE DEFINED. "/PROP" COMMAND IGNORED
Meaning
The PROP command cannot be processed because no command procedure
was defined in the event table assigned to the partner.
OMP0404
Destination: USER-TASK, CONSOLE Routing code: A Weight: 99
Warranty : NO
OMP0404 INCORRECT EVENT TABLE HEADER. EVENT TABLE DEACTIVATED
Meaning
A illegal event table header was detected. Possible reasons:
the module is not an event table or another
module (with the same entry name) was loaded.
Response
Load the correct event table or correct the event table.
OMP0405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0405 WRONG EVENT TABLE VERSION. EVENT TABLE DEACTIVATED
Meaning
No additional information.
Response
Recompile event table using the current PROP macro library.
OMP0406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0406 TSN-SPECIFIC AREA IS TOO BIG. EVENT TABLE DEACTIVATED
Meaning
Another event table has already been loaded with a TSN-Specific
area smaller than the current TSN-Specific area.
Response
Use the same length in all event tables.
OMP0407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0407 INCORRECT PROCEDURE HEADER. EVENT TABLE DEACTIVATED
Meaning
An illegal procedure header was detected when all the administration
procedures associated with the current event table were validated.
An event table entry points to an address not containing a procedure.
Response
Correct the event table.
OMP0408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0408 WRONG PROCEDURE VERSION. EVENT TABLE DEACTIVATED
Meaning
No additional information.
Response
Recompile the procedure using the current macro library.
OMP0409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0409 LENGTH OF THE PROCESSOR-SPECIFIC AREA INCORRECT. EVENT TABLE DEACTIVATED
Meaning
The length specified with the PROAREA operand in the
OPTAB macro ist less than 16 or greater than 4096. The event table
has been ignored.
Response
Correct the event table.
load it again.
OMP0410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0410 PROCESSOR-SPECIFIC AREA IS TOO BIG. EVENT TABLE DEACTIVATED
Meaning
An event table has already been loaded with a processor-specific
area smaller than that of the current event table.
Response
Use the same length in all event tables.
OMP0411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0411 ERRORS HAVE OCCURRED WHILE PROCESSING DADM MESSAGES FROM PARTNER (&00)
Meaning
The length of the DADM messages cannot be determined by PROP.
This can lead to errors in messages that are defined in event tables.
At occurrence of a DADM message that does not end in X'0F'
this message is issued.
Response
Use NTAC2-version greater than V3.0.
Increase the UCON Buffer of the specified partner.
Notify system service.
OMP0412
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0412 (&00) ERROR (&01) AT ADDRESS (&02)
Meaning
System call (EXEC, DMS) contains an error.
The name of the call is (&00). (&01) is the error code from R15
and (&02) is the address of the call.
Response
Depends on the error code (&01). If necessary notify the OMNIS
administrator or system administrator.
OMP0413
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0413 SDF SYNTAX FILE NOT FOUND. COMMAND IGNORED
Meaning
The SDF syntax file SYSSDF.OMNIS-PROP.<ver> is not cataloged.
Response
Catalog the file SYSSDF.OMNIS-PROP.<ver>.
OMP0414
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0414 (&00) COMMAND IS NOT DEFINED OR DEACTIVATED IN THE EVENT TABLE. COMMAND IGNORED
Meaning
The command could not be assigned to an active event table entry.
The command has been ignored.
Response
Correct the command or reactivate the event table entry.
OMP0415
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0415 MEMORY MANAGEMENT ERROR (&00) OCCURRED IN MODULE (&01) AT ADDRESS (&02)
Meaning
An error occurred during the PROP management of a TSN- or processor-
specific area.
Response
Notify the PROP administrator. Reload OMNIS and PROP.
OMP0416
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0416 "(&00)" EXECUTED
Meaning
Command (&00) successfully executed.
Response
None.
OMP0417
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0417 INCORRECT EVENT TABLE. COMMAND IGNORED
Meaning
The current event table contains an error. The command
has not been executed.
Response
Correct, recompile and reload the event table.
OMP0418
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0418 INCORRECT OPERATOR TABLE. COMMAND IGNORED
Meaning
The current operator table contains an error. The command
has not been executed.
Response
Correct, recompile and reload the operator table.
OMP0419
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0419 WRONG PASSWORD. COMMAND IGNORED
Meaning
No additional information.
Response
Use the right password and enter the command again.
OMP0420
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0420 TABLE ENTRY (&00) NOT FOUND. COMMAND IGNORED
Meaning
No additional information.
Response
Use the right name and enter the command again.
OMP0421
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0421 ERROR IN SDF SYNTAX FILE (&00). INPUT IGNORED
Meaning
An error occurred in the SDF syntax file (&00). See previous
message OMP0422. The current input was ignored.
Response
Correct or catalog the syntax file and load OMNIS and
PROP again.
OMP0422
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0422 (&00) ERROR (&01) OCCURRED FOR SDF SYNTAX FILE (&02)
Meaning
A call to SDF (OPNCALL, TRCMD) contains an error.
The name of the call is (&00). (&01) is the error code from
R15 and (&02) is the current syntax file.
Error code:
X'04' Unrecoverable error
X'08' Parameter error
X'0C' Treansfer area to small
X'10' EOF
X'1C' Incorrect command
X'28' Protocol area to small
X'30' Time expired
X'38' SDF not available
X'44' Syntax file not found
X'48' SDF command executed
X'54' Maximum context number reached
Response
Depends on the error code (&01). If necessary notify the SDF developer.
OMP0423
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0423 NO SDF SYNTAX FILE, OR ONLY THE GLOBAL SDF SYNTAX FILE WITH "CHECK=NO", WAS DEFINED IN THE OPERATOR TABLE FOR THIS PARTNER. COMMAND IGNORED.
Meaning
The command could not be checked syntactically.
The command was not executed.
Response
Define the SDF syntax file necessary for this partner in
the operator table. Notify the PROP administrator.
OMP0600
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0600 PLEASE ENTER COMMAND
Meaning
No additional information.
Response
Enter a command.
OMP0601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0601 OUTPUT ERROR. NO MESSAGE GENERATED
Meaning
No additional information.
Response
Reenter the MSG command.
OMP0602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0602 SYNTAX ERROR. COMMAND WAS NOT EXECUTED
Meaning
No additional information.
Response
Correct the command.
OMP0603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0603 RDATA ERROR. COMMAND WAS NOT EXECUTED
Meaning
No additional information.
Response
Reenter the command.
OMP0604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0604 WRONG MESSAGE KEY. COMMAND IGNORED.
Meaning
The 4-byte message key is wrong.
Response
Correct the message key.
OMP0605
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0605 GENMSG VERSION (&00) READY.
Meaning
No additional information.
OMP0700
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0700 PROPTEST VERSION (&00) READY.
Meaning
No additional information.
OMP0701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0701 SYNTAX ERROR. COMMAND WAS NOT EXECUTED.
Meaning
No additional information.
Response
Correct the command.
OMP0702
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0702 PROPTEST NORMALLY TERMINATED.
Meaning
No additional information.
OMP0703
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0703 (&00) ERROR (&01) AT ADDRESS (&02).
Meaning
A call to the operating system (EXEC, DMS) contains an error.
The name of the call is (&00). (&01) is the error code from R15
and (&02) is the address of the call.
The meaning of the error code is given in the BS2000 manuals.
Response
Depends on the error code (&01). If necessary notify the OMNIS
administrator or system administrator.
OMP0704
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0704 UNEXPECTED END OF FILE. PROPTEST TERMINATED.
Meaning
EOF was detected while the next command was being read. PROPTEST
was terminated.
OMP0705
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0705 NO TERMINAL DEFINED. COMMAND WAS NOT EXECUTED.
Meaning
No additional information.
Response
Define a terminal.
OMP0706
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0706 PAC (&00) NOT FOUND. COMMAND WAS NOT EXECUTED.
Meaning
No additional information.
Response
Correct the partner address code.
OMP0707
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0707 WRONG MESSAGE-KEY LENGTH. COMMAND IGNORED
Meaning
Only 4- and 7-byte message keys are allowed.
Response
Correct the message key.
OMP0708
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0708 EXIT GROUP '(&00)' IS NOT DECLARED
Meaning
No additional information.
Response
Correct the 'EXIT' operand or declare a new exit group.
OMP0709
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0709 EXIT GROUP '(&00)' DECLARED
Meaning
No additional information.
Response
None.
OMP0710
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0710 EXIT GROUP '(&00)' IS ALREADY DECLARED
Meaning
No additional information.
Response
None.
OMP0711
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0711 EXIT MODULE (&00) CANNOT BE LOADED. OPERAND "EXIT" IS IGNORED
Meaning
The exit module was not loaded. The error
code is given in the preceding message OMS0703.
Response
Correct the name of the exit routine or make the exit routine
available in the module library.
OMP0712
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0712 OUTPUT TO TERMINAL (&00)/(&01):
Meaning
No additional information.
OMP0713
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0713 MESSAGE TO PARTNER (&00)/(&01):
Meaning
No additional information.
OMP0714
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0714 COMMAND TO OMNIS:
Meaning
No additional information.
OMP0715
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMP0715 INVALID VERSION OF EXIT MODULE (&00). EXIT MODULE NOT LOADED
Meaning
No additional information.
Response
Recompile the exit module using the correct macro library.
OMP0716
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0716 MESSAGE FILE (&00) IS NOT ASSIGNED TO PARTNER (&01)
Meaning
No additional information.
OMP0717
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0717 (&00) ERROR (&01) OCCURRED FOR MESSAGE FILE (&02)
Meaning
An internal call to PROPTEST or a call to the operating system
contains an error. The name of the call is (&00). (&01) is the
error code from R15 and (&02) is the current message file.
Response
Check the message file.
OMP0718
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0718 MESSAGE (&00) WAS NOT FOUND IN THE ASSIGNED MESSAGE FILES
Meaning
No additional information.
OMP0719
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0719 FILE (&00) IS NOT A MESSAGE OUTPUT FILE. FILE WAS IGNORED
Meaning
No additional information.
Response
Check the file.
OMP0720
Destination: USER-TASK, CONSOLE Routing code: X Weight: 99
Warranty : NO
OMP0720 NO MESSAGE FILE ASSIGNED TO PARTNER (PAC=(&00)). MESSAGE WAS NOT GENERATED
Meaning
No additional information.
Response
Assign a message file with the ASSIGN-MESSAGE-FILE command.