Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0001 (&00)-ERROR (&01) AT ADDRESS (&02); INFO = (&03)
Meaning
An error occurred during a (DVS, LINK, REQM, ..) call to the operating
system. (&00) is the name of the call, (&01) is the error code
from R15 and (&02) the address
of the call. (&03) supplies further Information about
the call in question (file, library member).
Response
For the meaning of the error code, see the relevant BS2000 manual.
OMM0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0002 OMNIS-MENU VERSION (&00) LOADED AND INITIALIZED SUCCESSFULLY
OMM0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0003 NEW PASSWORD AND CONTROL PASSWORD DO NOT MATCH
Meaning
When a password is changed, the two passwords entered must be equal.
OMM0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0004 INVALID ACCESS AUTHORIZATION. COMMAND REJECTED
Meaning
Either the specification for the user ID or the password is invalid.
Check the entries in order to locate the error.
Response
Contact the MENU administrator.
OMM0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0005 UNSUCCESSFUL CONNECTION ATTEMPT OF USERNAME (&00) AT TERMINAL: (&01)/(&02). TERMINAL IS LOCKED
Meaning
Permitted number of connection attempts exceeded.
OMM0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0006 WRONG ID CARD INSERTED
Meaning
The information on your card does not match the generation.
OMM0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0007 NEW PASSWORD COULD NOT BE ENTERED IN USER TABLE
Meaning
No further information.
OMM0008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0008 READ ERROR ON ENTRY (&00) IN FILE (&01)
Meaning
The MENU-Administrator has not defined your entry (&00) in the
file (&01)
Response
Ask MENU administrator to correct the MENU files.
OMM0009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0009 OMNIS COMMAND MODE ILLEGAL FOR THIS USER NAME
Meaning
Authorization to use OMNIS command mode must be granted by the MENU
administrator.
OMM0010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0010 INPUT OUT OF RANGE
Meaning
The input exceeds the permitted range.
Response
Correct the input and repeat.
OMM0011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0011 CONNECTION SETUP INITIALIZED
Meaning
The establishment of a connection to the desired application has been
successfully initialized.
OMM0012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0012 CONNECTION LOST TO APPLICATION ((&00)/(&01))
Meaning
Connection was lost while working with application ((&00)/(&01)).
Response
Ask system administrator to restart application.
OMM0013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0013 CONNECTION SETUP TO APPLICATION ((&00)/(&01)) NOT EXECUTED; REASON = (&02)
Meaning
A connection could not be established to application ((&00)/(&01)).
Response
Ask the system oder MENU Administrator to identify the cause of the error
and eliminate it. (&02) is the reason for failure of the error.
OMM0014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0014 F OR K KEY NOT DEFINED IN MENU
Meaning
The F or K key pressed has not been defined by the MENU administrator.
OMM0015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0015 UTM PARTNER ((&00)/(&01)) REJECTED USER IDENTIFICATION; REASON = ((&02))
Meaning
Generation data of UTM application ((&00)/(&01)) and OMNIS-MENU do not
match.
Response
Reasons for negative BIND processing:
=00 session established
=01 specified interface version incorrect
=02 sign-on data incomplete or incorrect
=03 maximum number of sessions reached
=04 general error code (see neg. K036 message in SYSLOG)
- after KDCSIGN: general return code
=05 specified terminal already connected
=06 specified user already connected
=07 terminal or processor name missing
=08 terminal information in BIND invalid
=09 invalid KDCSIGN password
=0A BIND request lost
=0B terminal characteristics or protocol version missing
=0C terminal is not an interactive terminal; ANNOAMSG=N, PTYPE=APPLI
=0D or USAGE=NO has been generated in UTM
=0E no send authorization
=0F connection cleardown for transport connection in progress
=10 wrong ID card information in BIND
=11 invalid USER in BIND request
=12 KSET for terminal missing
=13 USER locked
=15 wrong response type
=16 BIND includes user message.
=17 the defined station is still in state "RELEASE-PENDING"
=18 transaction recovery; the user may not enter KDCSIGN now
=19 error during authentification
=1A chipcard authentification is running
=1B error during authentification; no reason specified
=1C password is being checked (intern);
=1D the new password is not complex enough
=1E error in the new password; new password = old password
=1F the new passwort is required (internal)
=20 KDCSIGN not allowed at the moment; user aleady connected
=21 there are no more user allowed to connect; MAX-CON-USER reached
=22 no new password specified
=23 timeout for passwort reached
=24 the new password is too short
=25 lack of resources
=26 the application will be ended; SHUT WARN has been entered
=27 the station does not possess the right key to continue the
conversation
=28 after transmission of the password by KDCUPD the password is not
complex enough or too short;.
=29 PTERM name unknown;
=2A processorname unknown;
=2B STATUS=OFF for this PTERM;
=2C STATUS=OFF for this LTERM;
=2D establishing of connection in progress;
=2E the station/connection is generated at an other BCAM application;
=2F processorname unknown and no terminalpool name;
=30 no terminalpool corresponding to station type or PTERM name
unknown;
=31 no free entry in the terminalpool;
=32 establishing of connection in progress;
=33 the terminalpool is generated in an other application;
=34 der connection request has been rejected by contention;
=35 connection request rejected by VTSU; e.g. the station type is not
supported or invalid connection letter;
=36 BCAM letterlength too short;
=37 BCAM returncode not ok.
OMM0016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0016 OMNIS-MENU DEACTIVATED
Meaning
The menu system has been deactivated. You can return to the menu system
using the MENU command.
OMM0018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0018 NO PASSWORD AUTHORIZED BY OMNIS-MENU ADMINISTRATOR
Meaning
The OMNIS-MENU administrator has not authorized you to access the
application automatically by means of a password.
OMM0019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0019 THIS USER REQUIRES IDENTITY CARD INFORMATION, BUT THE TERMINAL HAS NO CARD READER
Meaning
If a user is defined with identity card information the terminal must
be capable of reading an identity card.
Response
Use another terminal or inform the system administration to generate
your terminal with an identity card reader.
OMM0020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0020 NO PASSWORD WITHOUT USER MAY BE SPECIFIED IF SIGNON=NONE
Meaning
If SIGNON=NONE is defined for an application, you must also specify a
user if you enter a password.
OMM0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0021 USER ALREADY CONNECTED
Meaning
A user with this username is already connected with OMNIS-MENU.
OMM0022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0022 TERMINAL WORKAREA HAS TO BE AT LEAST (&00) BYTES, ONLY (&01) BYTES ARE GENERATED
Meaning
To run OMNIS-MENU the terminal workarea is too short (length = (&01)).
at least (&00) bytes are necessary for this area.
Response
You can enlarge the terminal workarea by changing the OMNIS start
parameters.
OMM0023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0023 THE DEFINED KEY-LENGTH OF THE OMNIS-TEXTFILE IS NOT EQUAL 6
Meaning
To run OMNIS-MENU the defined key-length of the OMNIS textfile has to be
equal 6.
Response
Change the length of the textkey in the OMNIS startupfile.
OMM0024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0024 (&00)-ERROR '(&02)(&03)' AT ADDRESS (&01). (&04) (&05)
Meaning
For the meaning of the error code, see the relevant BS2000 manual.
((&02)=MRCF,(
&03)=MSRC)
OMM0025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0025 INCOMPATIBLE FORMAT IN FILE (&00)
Meaning
Maybe the file (&00) was not generated with the actual version of
OMNISKD.
OMM0026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0026 FILE GENTAB HAS WRONG PARAMETER: (&00)
Response
Use OMNISKD to create the global parameters for OMNIS-MENU.
OMM0027
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0027 INVALID COMMAND
OMM0028
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0028 TO SET UP A CONNECTION AND REQUEST THE CONNECTION MESSAGE IS ONLY ALLOWED FROM THE CONNECTION MENU
OMM0029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0029 OMNIS-MENU CONFIGURATION HAS BEEN CHANGED SUCCESSFULLY
Meaning
The new OMNIS-MENU configuration has been changed successfully.
OMM0030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0030 OMNIS-MENU CONFIGURATION COULDN'T CHANGED
Meaning
An error occured during as system call. The configuration couldn't
changed. Message on SYSOUT and SYSLST or DUMP is written.
OMM0031
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0031 BLOCK SIZE OF FILE '(&00)' IS DIFFERENT FROM CURRENT BLOCK SIZE
Meaning
The BLKSIZE operand specified in the catalog entry does not match
the current OMNIS-MENU BLOCK SIZE.
Response
Convert OMNIS-MENU tables (program OMNISFC)
OMM0032
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0032 START OF MENU LIST REACHED
OMM0033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0033 END OF MENU LIST REACHED
OMM0034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0034 EXISTING CONNECTIONS FOR THE USER (&00) CANNOT BE RETAINED
Meaning
Due to global settings ONE-USER-ONE-CONNECTION=NO the connections cannot
be retained, because the user is ambigious.
OMM0035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0035 WARNING: PASSWORD EXPIRES IN (&00) DAYS
Meaning
Your password expires in (&00) days.
Response
Change your password within the next (&00) days.
OMM0036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0036 EXPIRATION DATE OF PASSWORD HAS ALREADY PASSED. ACCESS DENIED; THE USER SHOULD DEFINE A NEW PASSWORD
Meaning
As the expiration date of the password has passed, acces will be denied.
Response
The user should define a new password.
OMM0037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0037 INVALID PASSWORD
Meaning
The password does not match the complexity, specified by the
administrator
Response
Enter the correct password.
OMM0038
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0038 IMPLICIT APPLICATION SWITCH IS ACTIVATED
Meaning
The implicit application switch via TAC in the dialog message
is switched on.
OMM0039
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0039 IMPLICIT APPLICATION SWITCH IS DEACTIVATED
Meaning
The implicit application switch via TAC in the dialog message
is switched off.
OMM0040
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0040 CONNECTION TO PARTNER '(&00)' NO LONGER AVAILABLE
Meaning
The connection to the partner (&00) has been broken because
the MUX connection has been lost. The partner will not be
available until the MUX connection has been reestablished.
Response
Reestablish the MUX connection.
OMM0041
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0041 CONNECTION TO PARTNER '(&00)' IN HOLD
Meaning
The connection to the partner (&00) is in hold.
Open connection or sending messages is not allowed.
Response
Reestablish the MUX-connection.
OMM0042
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0042 CONNECTION TO MUX-PARTNER '(&00)' AVAILABLE NOW
Meaning
The MUX-application has been started and the MUX partner (&00)
is available now.
OMM0043
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0043 USER '(&00)' HAS CONNECTED WITH TERMINAL '((&01)/(&02))' TO OMNIS-MENU
Meaning
The user (&00) has connected to OMNIS-MENU by terminal
(&01)/(&02) successfully.
OMM0044
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0044 COMMAND ACCEPTED
OMM0045
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0045 New password has to be specified
OMM0046
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0046 password has already been used
OMM0047
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0047 START OF FILE REACHED
OMM0048
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0048 END OF FILE REACHED
OMM0049
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0049 INCOMPATIBLE ENTRY IN USER TABLE
Meaning
The entry in the user table was not generated with the actual
version of OMNISKD.
Response
Check the input file for OMNISKD and repeat the OMNISKD run
OMM0050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0050 INCOMPATIBLE ENTRY; FILE = (&00); KEY = (&01)
Meaning
A table entry with an incompatible version was read.
Response
Check your configuration files.
OMM0051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0051 New password cannot be specified
OMM0052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0052 THIS USER REQUIRES KERBEROS AUTHENTICATION, BUT THE TERMINAL-EMULATION DOES NOT SUPPORT KERBEROS AUTHENTICATION; VTSU-ERROR = (&00)
Meaning
If a user is defined with Kerberos Authentication,
the terminal emulation has to support Kerberos Authentication.
(&00) is the reason for failure of the VTSU-error.
Response
Use another terminal with Kerberos Auhentication.
OMM0053
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0053 THIS USER REQUIRES KERBEROS AUTHENTICATION, BUT THE TERMINAL TYPE DOES NOT SUPPORT AUTHENTICATION
Meaning
If a user is defined with Kerberos Authentication,
the terminal type 9763 has to be defined.
Response
Use terminal type 9763.
OMM0054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0054 KERBEROS AUTHENTICATION NOT SUPPORTED BY SECOS; SECOS-KRB-ERROR = (&00)
Meaning
Kerberos Authentication is not supported by SECOS.
For using Kerberos Authentication the subsystem SECOS-KRB is necessary.
(&00) is the reason for failure of the SECOS-KRB error.
Response
Please contact your software maintenance.
OMM0055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0055 ERROR DURING CREATION OF THE KERBEROS TICKET REQUEST. SECOS-KRB ERROR = (&00); REFER TO /HELP-MSG (&01)
Meaning
The creation of the Kerberos Authentication ticket failed with
error from SECOS-KRB.
(&00) is the reason for failure of the SECOS-KRB error.
(&01) is the message number for failure of the SECOS-KRB error.
Response
Please contact your software maintenance.
OMM0056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0056 ERROR DURING PARSING THE KERBEROS TICKET. SECOS-KRB ERROR = (&00); REFER TO /HELP-MSG (&01)
Meaning
The authentication ticket provided by the terminal emulation
could not be parsed by SECOS-KRB.
(&00) is the reason for failure of the SECOS-KRB error.
(&01) is the message number for failure of the SECOS-KRB error.
Response
Please contact your software maintenance.
OMM0057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0057 THE PRINCIPAL OF THE USER DIFFERS FROM THE DECLARATION IN THE USER TABLE
Meaning
The principal in the kerberos ticket does not match the generation.
OMM0058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0058 THE PRINCIPAL OF THE USER "(&00)" DIFFERS FROM THE DECLARATION "(&01)" IN THE USER TABLE
Meaning
The principal in the kerberos ticket does not match the generation.
OMM0600
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0600 OMNISMD VERSION "(&00)" STARTED
Meaning
The current version of OMNISMD is (&00).
Response
None.
OMM0601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0601 (&00)-ERROR (&01) AT ADDRESS (&02). INFO = (&03)
Meaning
An error occurred during a (DVS, LNK) call to the operating system.
(&00) is the name of the call, (&01) the error code from R15 and
(&02) the address of the call. (&03) supplies further information about
the call in question (file, library member).
Response
For the meaning of the error code, see the relevant BS2000 manual.
OMM0602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0602 INVALID FUNCTION SELECTED
Meaning
A function was selected which is not available.
OMM0603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0603 RECORD NOT FOUND. COMMAND NOT EXECUTED
Meaning
The specified record could not be read.
OMM0604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0604 INPUT OUT OF RANGE
Meaning
The input exceeds the permitted range. The command has not been
executed.
OMM0605
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0605 INVALID PARTNER TYPE
Meaning
The specified partner type must be one of the OMNIS partner types
(TIAM, UTM, ..).
Response
Enter correct partner type.
OMM0606
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0606 INVALID ROUTE OPERAND
Meaning
For operand ROUTE you may only specify D(irect), I(ndirect) or M(ux).
Response
Enter correct ROUTE option.
OMM0607
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0607 INVALID LINE OPERAND
Meaning
For the LINE operand you can only specify Y(es) or N(o).
Response
Enter correct LINE option.
OMM0608
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0608 OMNISMD TERMINATED NORMALLY
OMM0609
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0609 NO PASSWORD ASSIGNED FOR USER NAME. RECORD NOT WRITTEN
Meaning
A password must be assigned to each user name.
OMM0610
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0610 WARNING: NO MENU DEFINED FOR USER NAME (&00); RECORD WRITTEN TO FILE
OMM0611
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0611 (&00) RECORDS PROCESSED IN FILE (&01)
Meaning
(&00) records were processed while editing file (&01).
OMM0612
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0612 NO PAC DEFINED FOR APPLICATION
Meaning
Each application must have a partner address code.
OMM0613
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0613 NO PARTNER NAME/PROCESSOR NAME DEFINED
Meaning
Depending on the type of application, a processorname or partner name
must be defined.
OMM0614
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0614 F OR K KEY IS AMBIGUOUS (PATH=((&00),(&01)))
Meaning
A F or K key can only be assigned once in each menu.
OMM0615
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0615 P KEY IS AMBIGUOUS (PATH=((&00),(&01)))
Meaning
A P key can only be assigned once in each menu.
OMM0616
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0616 PAC (&00) IN MENU (&01) IS AMBIGUOUS
Meaning
A PAC can only be assigned once in each menu.
OMM0617
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0617 RECORD WRITTEN TO FILE
OMM0618
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0618 RECORD READ FROM FILE
OMM0619
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0619 RECORD DELETED FROM FILE
OMM0620
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0620 NO KEY SPECIFIED FOR RECORD. ACTION NOT EXECUTED
Meaning
The key of a record must comprise at least one character.
OMM0621
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0621 NO APPLICATION DEFINED FOR MENU ENTRY. RECORD NOT ENTERED
Meaning
At least one application must be entered in the menu.
OMM0622
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0622 NO K KEY OR F KEY DEFINED FOR P KEY (PATH=((&00),(&01)))
Meaning
If you want a P key to be loaded, you need to specify an associated K key
or F key as well.
OMM0623
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0623 CODING OF CARD INFO MUST BE 'X' OR 'C'. COMMAND NOT EXECUTED
Response
Correct the input.
OMM0624
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0624 INFO IN HEX AND LENGTH NOT EVEN. COMMAND NOT EXECUTED
Meaning
If the information is in hexadecimal notation, the length must be even.
OMM0625
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0625 INVALID HEX INFORMATION. COMMAND NOT EXECUTED
Meaning
If the information is in hexadecimal notation, the characters entered
must be in the range 0 through F.
OMM0626
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0626 MENU (&00) IN MENU TABLE NOT DEFINED. RECORD NOT WRITTEN
Meaning
For each user name a menu must be entered in the menu table.
OMM0627
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0627 APPLICATION ((&00),(&01)) IN APPLICATION TABLE NOT DEFINED. RECORD NOT WRITTEN
Meaning
For each application in the menu there must be a corresponding record in
the application file.
OMM0628
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0628 PAC OF APPLICATION (&00) IS AMBIGUOUS. RECORD NOT WRITTEN
Meaning
The PAC of each application entry in the menu must be unique.
OMM0629
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0629 INPUT "++", "+", "--", "-" (AND "*" BY USER- AND MENUENTRIES) NOT PERMITTED AS A KEY
Meaning
This input is only allowed in the "next record" field or
as a key for the record to be read.
Response
Correct the input and repeat.
OMM0630
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0630 CMSG NOT PERMITTED
Meaning
The CMSG operand is only allowed for partners of type UCON and DCAM.
OMM0631
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0631 INVALID SIGNON OPERAND
Meaning
For the SIGNON operand you can only specify Both, User, None or Suppress.
Response
Enter correct SIGNON option.
OMM0632
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0632 ROUTE=MUX ALLOWED ONLY FOR PARTNER OF TYPE UTM. INPUT HAS BEEN IGNORED
Meaning
The parameter ROUTE=MUX is only allowed for partner of type UTM. Correct
the input and repeat.
OMM0633
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0633 ALL FILES HAVE BEEN PROCESSED
OMM0634
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0634 PASSWORD FOR APPLICATION NOT PERMITTED
Meaning
Operand CPASS is only allowed for partner of type DCAM and UTM.
OMM0635
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0635 ROUTE=INDIRECT AND NO PROCESSOR NAME DEFINED
Meaning
If ROUTE=INDIRECT a processorname must be defined.
OMM0636
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0636 INCOMPATIBLE FORMAT IN FILE (&00)
Meaning
Maybe the file (&00) was not generated with the actual
version of OMNISKD.
OMM0637
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0637 OMNIS COMMAND KEY IS AMBIGUOUS.
Meaning
The key is already defined.
OMM0639
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0639 NO K KEY DEFINED FOR P KEY
OMM0640
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0640 MOMAP-ERROR '(&01),(&02)' AT ADDRESS (&00).
Meaning
For the meaning of the error code, see the relevant BS2000 manual
((&01)=MRCF,(&02)=MSRC).
OMM0641
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0641 UNKNOWN ADMINISTRATION FUNCTION
OMM0642
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0642 START OF FILE REACHED
OMM0643
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0643 END OF FILE REACHED
OMM0644
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0644 BLOCK SIZE OF FILE '(&00)' IS DIFFERENT FROM CURRENT BLOCK SIZE
Meaning
The BLKSIZE operand specified in the catalog entry does not match
the current OMNIS-MENU BLOCK SIZE.
Response
Convert OMNIS-MENU tables (program OMNISFC)
OMM0645
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0645 START OF MENU LIST REACHED
OMM0646
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0646 END OF MENU LIST REACHED
OMM0647
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0647 MAXIMAL NUMBER OF PAGES REACHED
OMM0648
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0648 MENU ENTRY WRITTEN TO MENU RECORD
OMM0649
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0649 RECORD WRITTEN TO FILE; WARNING: APPLICATION IN MENU RECORD NOT WRITTEN, BECAUSE MAXIMAL NUMBER OF MENU ENTRIES REACHED
OMM0650
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0650 WRONG RECORD IN TAC TABLE (TAC='(&00)',NETWORK ADDRESS='(&01)'/'(&02)')
OMM0651
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0651 GROUP TAC '(&00)' TOO LONG
Meaning
The length of a group tac must not exceed 4.
OMM0652
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0652 THE TAC '(&00)' IN THE TAC TABLE IS AMBIGUOUS
OMM0653
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0653 WRONG SWITCH MODE IN THE TAC TABLE FOR TAC '(&00)'
Meaning
For the switch mode you can only specify " " or "S".
OMM0654
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0654 K KEY FOR (DE)ACTIVATING THE IMPLICIT APPLICATION SWITCH IS AMBIGUOUS
Meaning
The K key for (de)activating the implicit application switch
is already used for the Go back key or the OMNIS command key.
OMM0655
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0655 TAC TABLE MISSING
Meaning
The TAC Table does not exist, no implicit application switch
possible.
OMM0656
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0656 PROZESSOR NAME *ANY MAY ONLY BE SPECIFIED FOR PARTNER TYPE DCAM OR TIAM
Meaning
Load distribution with *ANY is only possible for partner of
type DCAM or TIAM.
Response
Correct the command and try again.
OMM0657
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0657 PROZESSOR NAME *ANY MUST NOT BE SPECIFIED FOR PARTNER WITH ROUTE=INDIRECT
Meaning
Load distribution with *ANY is not possible for partner with
route INDIRECT.
Response
Correct the command and try again.
OMM0658
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0658 NO K KEY DEFINED FOR P KEY
OMM0659
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0659 IMPLICIT APPLICATION SWITCH KEY IS AMBIGUOUS.
Meaning
The key is already defined.
OMM0660
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0660 START-SEQUENCE EDITING CANCELED, NOTHING CHANGED
Meaning
The editing of the start-sequence has been canceled. No data has
been added, the text file remained unchanged.
OMM0661
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0661 (&00) RECORDS PROCESSED IN FILE (&01), SOME RECORDS TRUNCATED
Meaning
Some records of the start-sequence were longer than 255 characters
an had been truncated.
OMM0662
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0662 (&00) RECORDS PROCESSED IN FILE (&01), SOME RECORDS DISCARDED
Meaning
The start-sequence contained to many records, the maximal
number had been added.
OMM0663
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0663 START-SEQUENCE (&00) IN WORKFILE (&01) TO BE ADDED? REPLY (Y=YES; N=NO OR R=RETURN TO EDITOR)
Meaning
EDT was terminated by HALT or K1 although the start-sequence
had been modified.
(&00): start-sequence-number
(&01): EDT workfile
Response
Y: start-sequence should be added
N: start-sequence should not be added
R: return to editor
OMM0664
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0664 SOME RECORDS OF START-SEQUENCE (&00) IN WORKFILE (&01) EXCEED 255 CHARACTERS, TRUNCATE AND ADD? REPLY (Y=YES; N=NO OR R=RETURN TO EDITOR)
Meaning
Some records of the start-sequence are longer than 255 characters.
(&00): start-sequence-number
(&01): EDT workfile
Response
Y: start-sequence should be added and records truncated
N: start-sequence should not be added
R: return to editor
OMM0665
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0665 START-SEQUENCE (&00) IN WORKFILE (&01) EXCEEDS (&02) RECORDS, TRUNCATE AND ADD? REPLY (Y=YES; N=NO OR R=RETURN TO EDITOR)
Meaning
In the start-sequence the maximum number of records is exceeded.
(&00): start-sequence-number
(&01): EDT workfile
(&02): maximum number of records
Response
Y: start-sequence should be truncated and added
N: start-sequence should not be added
R: return to editor
OMM0666
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0666 SPECIFIED KEY LOCKED IN TEXT FILE
Meaning
The key of the start-sequence in the text file is locked, when
1. another OMNISMD is editing the start-sequence or
2. during write back, if OMNIS currently executes the start-sequence.
Response
1. Coordinate the administration with each other.
2. after 10 seconds the control is back to EDT. Repeat the RETURN
or save the start-sequence for a later attempt.
OMM0700
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0700 OMNISBD VERSION "(&00)" STARTED
Meaning
The current version of OMNISBD is (&00).
OMM0701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0701 (&00)-ERROR (&01) AT ADDRESS (&02). INFO = (&03). KEY = (&04)
Meaning
An error occurred during a (DVS, LNK) call to the operating system.
(&00) is the name of the call, (&01) the error code from R15 and
(&02) the address of the call. (&03) supplies further information about
the call in question (file, library member). (&04) supplies the key of
the record.
Response
For the meaning of the error code, see the relevant BS2000 manual.
Depends on the error code (&01). If necessary notify the OMNIS-MENU
administrator or system administrator.
OMM0702
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0702 INPUT RECORD TOO LONG (IGNORED)
Meaning
NO additional information.
Response
Correct the input file and rerun OMNISBD.
OMM0703
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0703 SYNTAX ERROR. STATEMENT HAS BEEN IGNORED
Response
Correct the input file and repeat OMNISBD
OMM0704
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0704 FILES COULD NOT BE GENERATED
OMM0705
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0705 FILES GENERATED WITH ERRORS
OMM0706
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0706 FILES GENERATED WITHOUT ERRORS
OMM0707
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0707 A PARAMETER IS MISSING IN THIS DECLARATION
OMM0708
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0708 WARNING: MENU (&00) NOT DEFINED FOR USER (&01)
Meaning
For the user name a menu must be entered in
the menu table.
OMM0709
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0709 WARNING: APPLICATION (&00) IN APPLICATION TABLE NOT DEFINED (USER=(&01))
Meaning
For each application in the menu there must be a corresponding record in
the application table.
OMM0800
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0800 OMNISFC VERSION "(&00)" STARTED
Meaning
The current version of OMNISFC is (&00).
OMM0801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0801 FILE (&00) : GENERATED BY OMNIS-MENU (&01)
Meaning
The File (&00) was generated by OMNISKD Version (&01).
Response
none.
OMM0802
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0802 OMNISFC TERMINATED NORMALLY
OMM0803
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0803 OMNISFC TERMINATED ABNORMALLY
OMM0804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0804 (&00)-ERROR (&01) AT ADDRESS (&02). INFO = (&03). KEY = (&04)
Meaning
An error occurred during a (DVS, LNK) call to the operating system.
(&00) is the name of the call, (&01) the error code from R15 and
(&02) the address of the call. (&03) supplies further information about
the call in question (file, library member). (&04) supplies the key of
the record.
Response
For the meaning of the error code, see the relevant BS2000 manual.
OMM0805
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0805 INCOMPATIBLE FORMAT IN FILE (&00)
Response
Maybe the file (&00) was not generated with OMNISKD.
OMM0806
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0806 (&00) RECORDS PROCESSED IN FILE (&01)
Meaning
(&00) records were processed during the editing of file (&01).
OMM0807
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
OMM0807 UNEXPECTED END OF FILE. OMNISFC RUN ABORTED