Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP0001 MACHINE ERROR CODE X'(&00)' DURING SNAP, SNAP-ID: '(&01)'
Meaning
(&01): SNAP-ID of SNAP caller.
Response
Take SLED and reload system.
NSP0002
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP0002 SNAP ERROR CODE '(&00)', SNAP-ID: '(&01)', '(&02)'
Meaning
(&01): SNAP-ID of SNAP caller
(&02): Insert of SNAP caller, if it exists.
Response
Take SLED and reload system.
NSP1000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP1000 SNAPFILE WRITTEN. SNAP-ID: '(&00)', '(&01)'
Meaning
SNAP was called with SNAP-ID (&00) and insert (&01).
The file 'SNAPFILE' contains the SNAPSHOT dump.
NSP1001
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP1001 SNAP ERROR. SNAP NOT WRITTEN. SNAP-ID: '(&00)', '(&01)'
Meaning
During SNAP for SNAP ID (&00) an error occurred.
SNAP processing is aborted. The caller gets control with an error
return code.
No valid SNAPSHOT dump is in the SNAP file.
At /SHUTDOWN a message is displayed advising the operator to take a
SLED dump after /SHUTDOWN.
(&00): SNAP-ID of SNAP caller
(&01): Insert of SNAP caller, if existing.
Response
After /SHUTDOWN the operator should take a SLED dump which should be
sent to the SNAP developers' department.
NSP1002
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP1002 SNAPSHOT FUNCTION NOT AVAILABLE. SNAP-ID '(&00)' REJECTED
Meaning
The SNAPSHOT function is not available on the running system.
(&00): SNAP-ID of SNAP caller.
Response
See the manual SYSTEM OPERATOR'S GUIDE.
NSP1010
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP1010 OUTPUT OF SNAPSHOT INCOMPLETE BECAUSE OF '(&02)'. SNAP ID: '(&00)'; '(&01)'
Meaning
Because of '(&02)' it was impossible to save all data. The saved data are
not lost but will be processed.
(&00): SNAP-ID of SNAP caller
(&01): Insert of SNAP caller if exists
(&02): 1 = Lack of space (SNAPFILE too small)
2 = Lack of time (system parameter value SNAPTIME too small)
3 = I/O error
4 = Program error
5 = CCW error
6 = Conversion error
7 = Memory Management error
Response
In case of lack of space: increase SNAPFILE size by means of
- command ACTIVATE-SNAPSHOT
- or product SIR
In case of lack of time : increase system parameter value SNAPTIME:
to maximum value (24 seconds), in case of less
These measures enable SNAPSHOT to save more diagnostic data in the
SNAPFILE.
NSP2000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2000 SNAP FILE COPIED INTO FILE '(&00)'
Meaning
SNAP File has been copied into file (&00).
The file name has been built as follows:
(&00) : $SYSSNAP.SNAP.<snap-id>.<date>.<time>,
<snap-id>: SNAP-ID of the SNAP caller,
<date> : YYYY.MM.DD date of SNAP call,
<time> : HH.MM.SS time of SNAP call.
File (&00) may be analyzed by means of DAMP.
NSP2002
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2002 SNAP FILE NOT YET COPIED
Meaning
SHUTDOWN is in process. The copying of the SNAP file can no longer be
started by the SNAP task.
Response
At next STARTUP the copying will be done if DRV is not activated.
NSP2003
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2003 SNAP FUNCTION ERROR DURING COPY INTO FILE '(&00)'
Response
Analyze error logging file.
NSP2005
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2005 UNRECOVERABLE ERROR DURING COPY OF SNAPFILE CAUSED TERMINATION OF THE TASK SNAP('(&00)','(&01)')
Meaning
During the copying of the file SNAPFILE an unrecoverable error has
occurred. Thus the task SNAP was terminated.
NSP2007
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2007 REQUESTED DISK SPACE FOR SNAP COPY FILE COULD NOT BE ALLOCATED. PLEASE CONTACT SYSTEM ADMINISTRATION FOR RECOVERY. REPLY (EOT = ACKNOWLEDGE)
Meaning
Due to lack of disc space (DMS0541/DMS0546) the SNAP COPY FILE cannot
be allocated under userID SYSSNAP.
The SNAP dump function is deactivated.
Response
After recovery of disc space by system administration the
SNAP dump function must be activeted again via command
ACTIVATE-SNAPSHOT.
NSP2008
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP2008 REQUESTED DISK SPACE FOR SNAP FILES COULD NOT BE ALLOCATED. PLEASE CONTACT SYSTEM ADMINISTRATION FOR RECOVERY. REPLY (EOT = ACKNOWLEDGE)
Meaning
Due to lack of disc space (DMS0541/DMS0546) the snapfiles cannot
be allocated under userID TSOS. Until recovery of disc space
SNAP dump function can not be activated.
Response
Recovery of disc space by system administration.
NSP3000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3000 SNAP FILE '(&00)' NOT IN CATALOG. SNAPSHOT FUNCTION SUPPRESSED
Meaning
File (&00) has not been created, despite option SNAPSHOT=ON.
Therefore, the SNAPSHOT function has been suppressed.
Response
Generate the SNAP file by means of SIR.
NSP3010
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3010 NO USABLE CATALOG FOR SNAP FILE '(&00)'. SNAPSHOT FUNCTION SUPPRESSED
Meaning
There is no usable catalog for location of SNAP file (&00).
Therefore, the SNAPSHOT function has been suppressed.
NSP3020
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3020 SNAP FILE '(&00)' NOT FOUND. DMS-RC '(&01)'. SNAPSHOT FUNCTION SUPPRESSED. /HELP DMS(&01),INF=D
Meaning
An FSTAT call for file (&00) has been rejected by the DMS with
error code (&01).
Therefore, the SNAPSHOT function has been suppressed.
For more detailed information about the DMS error enter the /HELP command,
in system mode or see the manuals 'System Messages', 'DMS Disk Processing'
or 'DMS Tape Processing'.
Response
Take appropriate actions, in accordance with DMS error code (&01).
NSP3030
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3030 SNAP FILE '(&00)' NOT ON PUBLIC VOLUME. SNAPSHOT FUNCTION SUPPRESSED
Response
Generate the SNAP file by means of SIR.
NSP3040
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3040 SNAP FILE '(&00)' NOT CONTINUOUS. SNAPSHOT FUNCTION SUPPRESSED
Response
Generate the SNAP file by means of SIR.
NSP3050
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3050 SNAP FILE '(&00)' PASSWORD PROTECTED. SNAPSHOT FUNCTION SUPPRESSED
Response
Reset password protection.
NSP3060
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3060 SNAP FILE '(&00)' WRITE PROTECTED. SNAPSHOT FUNCTION SUPPRESSED
Response
Reset write protection.
NSP3070
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3070 SNAP FILE '(&00)' TOO SMALL. SNAPSHOT FUNCTION SUPPRESSED
Meaning
The SNAP file (&00) is smaller than the class 1 memory.
Therefore, the SNAPSHOT function has been suppressed.
Response
Erase file (&00) and generate a SNAP file by means of SIR.
NSP3080
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3080 DISK WITH VSN '(&00)' FOR SNAP FILE '(&01)' NOT ONLINE. SNAPSHOT FUNCTION SUPPRESSED
NSP3090
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3090 DISK WITH VSN '(&00)' FOR SNAP FILE '(&01)' NOT AVAILABLE. NSIAQIR-RC: '(&02)'. SNAPSHOT FUNCTION SUPPRESSED
Meaning
The NSIAQIR call for disk (&00) containing file (&01) has been rejected
with error code (&02).
NSP3091
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3091 DISK WITH VSN '(&00)' FOR FILE '(&01)' NOT SUPPORTED BY SNAPSHOT. SNAP FUNCTION SUPPRESSED
Response
Generate SNAP file by means of SIR on a disk supported by SNAPSHOT.
NSP3092
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3092 CPU HSI NOT SUPPORTED BY SNAPSHOT. SNAPSHOT FUNCTION SUPPRESSED
NSP3100
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3100 OPEN ERROR FOR SNAP FILE '(&00)'. DMS-RC: '(&01)'. SNAPSHOT FUNCTION SUPPRESSED. /HELP DMS(&01),INF=D
Meaning
For more detailed information about the DMS error enter the /HELP command,
in system mode or see the manuals 'System Messages', 'DMS Disk Processing'
or 'DMS Tape Processing'.
Response
Analyze DMS error code (&01).
NSP3110
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3110 WRITE ERROR FOR SNAP FILE '(&00)'. DMS-RC: '(&01)'. SNAPSHOT FUNCTION SUPPRESSED. /HELP DMS(&01),INF=D
Meaning
For more detailed information about the DMS error enter the /HELP command,
in system mode or see the manuals 'System Messages', 'DMS Disk Processing'
or 'DMS Tape Processing'.
Response
Analyze DMS error code (&01).
NSP3120
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3120 CLOSE ERROR FOR SNAP FILE '(&00)'. DMS-RC: '(&01)'. SNAPSHOT FUNCTION SUPPRESSED. /HELP DMS(&01),INF=D
Meaning
For more detailed information about the DMS error enter the /HELP command,
in system mode or see the manuals 'System Messages', 'DMS Disk Processing'
or 'DMS Tape Processing'.
Response
Analyze DMS error code (&01).
NSP3130
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3130 SNAP ERROR CODE '(&00)'. SNAPSHOT FUNCTION SUPPRESSED
Meaning
Verification of SNAP file has been rejected with error code (&00).
Therefore, the SNAPSHOT function has been suppressed.
Response
Analyze SNAP error code (&00).
&00: X'04' Last half page pointer of SNAP file differs from catalogue
entry
NSP3131
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3131 SNAP ERROR CODE '(&00)' ON CREATING CHANNEL PROGRAM. SNAPSHOT FUNCTION SUPPRESSED
Response
Analyze SNAP error code (&00).
&00: X'04' Function code incorrect
X'08' Invalid request of memory
X'14' Wrong function 'Get size of skeleton'
X'20' Wrong function 'Generate skeleton'
NSP3140
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3140 ERROR ON CREATING SNAP TASK. $CREAT ERROR CODE: '(&00)'
Meaning
The $CREAT call to create the SNAP task was rejected with $CREAT error
code (&00). If a SNAPSHOT dump has been written into the SNAP file,
it cannot be copied.
Response
Analyze $CREAT error code (&00).
NSP3141
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3141 BOURSE CREATION ERROR CODE '(&00)'. SNAP TASK TERMINATED
Meaning
The $NCREBO call to built up the 'DMS READY' bourse interface between
SNAP task und DMS startup has been rejected with an error code (&00) and,
therefore the SNAP task has been terminated.
Response
Analyze $NCREBO error code (&00).
NSP3142
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3142 'NAME MANAGER' ERROR CODE '(&00)'. SNAP TASK TERMINATED
Meaning
The NAME MANAGER call to save the 'DMS READY' bourse identification
for DMS startup has been rejected with error code (&00) and,
therefore the SNAP task has been terminated.
Response
Analyze error code (&00).
NSP3150
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3150 INFORMATION REQUEST HAS BEEN REJECTED WITH ERROR CODE '(&00)'. SNAPSHOT FUNCTION SUPPRESSED
Meaning
A request for memory management to inform about the main memory size
and PPAT location supported by the system has been rejected with error
code (&00) and, therefore the SNAPSHOT function has been suppressed.
Response
Analyze error code (&00).
NSP3151
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3151 A RESIDENT MEMORY REQUEST HAS BEEN REJECTED. SNAPSHOT FUNCTION SUPPRESSED
Meaning
A class 3 memory request has been rejected. There are no resident
work buffer for SNAPSHOT and, therefore the SNAPSHOT function has been
suppressed.
NSP3152
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3152 TRANSLATION ERROR FOR ADDRESS X'(&00)'. SNAPSHOT FUNCTION SUPPRESSED
Meaning
The translation of class 3 page address (&00) by means of $V2C has been
rejected with condition code and, therefore the SNAPSHOT function has
been suppressed.
(&00): Virtual page address.
NSP3160
Destination: USER-TASK Routing code: Weight: 90
Warranty : NO
NSP3160 WRONG SNAP PARAMETER IN THE STARTUP PARAMETER FILE
Meaning
The SNAP parameter 'SNAP-ACTIVE-SWITCH' in the parameter file is wrong.
Default value ON is used.
NSP3161
Destination: USER-TASK Routing code: Weight: 90
Warranty : NO
NSP3161 ERROR (&00) WHEN CALLING THE STARTUP PARAMETER SERVICE
Meaning
Startup parameter service returned RC=(&00). Please contact maintenance
if a STARTUP parameter file for SNAP is existing.
(&00): C'0000000C' = The datas has been truncated
C'00000010' = No (more) datas existing
NSP3170
Destination: USER-TASK Routing code: Weight: 90
Warranty : NO
NSP3170 DURING COPY OF SNAPFILE ONE (OR MORE) FRAME WAS DETECTED TO BE ASSIGNED BOTH TO CL1/CL3 AND CL4 MEMORY. ASSIGNMENT IS MADE TO CL1/CL3 MEMORY
Meaning
There are two bitmaps, one for CL1/CL3 memory the other for CL4 memory.
One (or more) frame is marked in both bitmaps.
Response
NONE.
NSP3180
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP3180 OPERATION NAME SHOW-SNAPSHOT-STATUS NOT PERMITTED WITH THE CURRENT PRIVILEGES
Meaning
Current privileges do not permit operation SHOW-SNAPSHOT-STATUS.
NSP3181
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NSP3181 (&00) ERROR. RETURNCODE : (&01)
NSP4000
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NSP4000 FUNCTION '(&00)' STARTED FOR SNAP DUMP FUNCTION
Meaning
(&00): Function ACTIVATE or DEACTIVATE
Response
NONE.