NRTC500

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC500   TERM-REQ FOR TSN=(&00),EC=(&01),NIA=(&02)

Meaning

A termination request for the preallocated task with the task sequence
number (&00) has been initiated with event code (&01) at location (&02)
before the end of class-2-STARTUP.

Response

Take SLED.

NRTC501

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC501   TERM-REQ FOR TSN=(&00),EC=(&01),NIA=(&02) (&03)

Meaning

A termination request for the preallocated task with the task sequence
number (&00) has been initiated with event code (&01) at location (&02).
If possible, additionally (&03) the termination code is given.

Response

Take SLED.

NRTC502

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC502   TERM-ORDER INIT FAILED AND CDUMP NOT POSSIBLE.

Meaning

In the module NRTINIT, it was not possible to process a termination
request in spite of several retries. Additionally a system dump could
not be taken.

Response

As this is a diagnostic crash, take SLED.

NRTC503

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC503   TERMINATION ORDER OVERFLOW AND CDUMP NOT POSSIBLE

Meaning

In the module NRTINIT more than 4 recursive termination requests have
occurred. Additionally a system dump could not be taken.

Response

As this is a diagnostic crash, take SLED.

NRTC504

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC504   NEITHER SERSLOG NOR CDUMP POSSIBLE

Meaning

The module NRTINIT has received a recursive termination order during
SERSLOG processing. Additionally a system dump could not be taken.

Response

As this is a diagnostic crash, take SLED

NRTC505

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC505   REPETITIVE TERMINATION ERROR AND CDUMP NOT POSSIBLE

Meaning

The module NRTINIT has detected repetitive errors in the module NRTCTRL.
Additionally a system dump could not be taken.

Response

As this is a diagnostic crash, take SLED.

NRTC506

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC506   ERROR DURING TASK DESTROY AND CDUMP NOT POSSIBLE

Meaning

The module NRTINIT has received a termination order after task
destruction was initiated for the task (the indicator ETCBLTST is set
in the switch ETCBRTSW). Additionally a system dump could not be taken.

Response

As this is a diagnostic crash, take SLED.

NRTC507

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC507   NO TERMINATION WORK AREA AVAILABLE

Meaning

In the module NRTINIT it was not possible to obtain a Termination Work
Area.

Response

As this is a diagnostic crash, take SLED.

NRTC508

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC508   TERMINATION WORK AREA NOT ACCESSIBLE AND CDUMP NOT POSSIBLE.

Meaning

In the module NRTINIT it was not possible to access the Termination Work
Area addressed in the TCB. Additionally a system dump could not be taken.

Response

As this is a diagnostic crash, take SLED.

NRTC509

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC509   TERM-REQ FOR TSN=(&00),NIA=(&01)

Meaning

A termination request for the preallocated task with the task
sequence number (&00) has been initiated at location (&01)
before the end of class-2-STARTUP.

Response

Take SLED.

NRTC510

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC510   SYSTEM DUMP REQUESTED FOR A SYSTEM TASK DURING SHUTDOWN. CDUMP NOT POSSIBLE

Meaning

The processing of a system task leads to an error which causes an
abnormal task termination with request for a system dump.
If this occurs during SHUTDOWN(-END)-processing, an abnormal system
termination ("crash") is initiated if system is in fault intolerant
mode.
When an analogous error is caused by a user task, the task is set
to permanent wait state "Pended indefinitely".
When the system is in tolerant mode, any task which leads to the
analogous error will be terminated. Any diagnostic information is lost.

Response

Take SLED.

NRTC511

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC511   RECURSION DURING TERMINATION FOR UNALLOWED INTERRUPTS

Meaning

An error within the central error handling routine of Termination
Processing has led to a recursive call of this (central error
handling) routine.
The following actions are necessary in order to avoid an endless loop:
If the switch NRTRECSW is set to X'FF',
an abnormal system termination ("crash") is initiated.
If the switch is not set, the affected task is put into
permanent wait state "Pended indefinitely".
Diagnostic information remains available.

Response

Take SLED.

NRTC512

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC512   DIAGNOSTIC REP AT (&00)

Meaning

A diagnostic rep at location (&00) caused the system crash.

Response

As this is a diagnostic crash, take SLED.

NRTC513

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC513   SYSTEM DUMP REQUESTED FOR A SYSTEM TASK WHILE RESTART OPTION WITH DUMP IS ON. CDUMP NOT POSSIBLE

Meaning

The processing of a system task leads to an error which causes an
abnormal task termination with request for a system dump.
If this occurs while Restart Option is switched on with DUMP
an abnormal termination ("crash") is initiated with automatic SLED
if system is in fault intolerant mode.
When an analogous error is caused by a user task, the task is set
to permanent wait state "Pended indefinitely".
When the system is in tolerant mode, any task which leads to the
analogous error will be terminated. Any diagnostic information is lost.

NRTC514

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC514   MER ERROR AT NIA (&00); EVENT CODE (&01)

Meaning

An illegal interrupt with event code (&01) of class 'M' (machine error)
has been detected at address (&00) in SIH.
Processing was terminated in order to avoid further possible problems.

Response

Take SLED.

NRTC515

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC515   SVC ERROR AT NIA (&00)

Meaning

An interrupt of class 'S' (SVC) has been detected in SIH.
Processing was terminated in order to avoid further possible problems.

Response

Take SLED.

NRTC516

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC516   PRG-INT ERROR AT NIA (&00); EVENT CODE (&01)

Meaning

An illegal interrupt with event code (&01) of class 'P' (program
interrupt) has been detected at address (&00) in SIH.
Processing was terminated in order to avoid further possible problems.

Response

Take SLED.

NRTC517

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC517   SYSTEM DUMP REQUESTED FOR A SYSTEM TASK WHILE DMS NOT YET READY. CDUMP NOT POSSIBLE

Meaning

The processing of a system task leads to an error which causes an
abnormal task termination with request for a system dump.
If this occurs within startup while DMS not yet ready an abnormal
system termination ("crash") is initiated is system is in fault
intolerant mode.
When an analogous error is caused by a user task, the task is set
to permanent wait state "Pended indefinitely".
When the system is in tolerant mode, any task which leads to the
analogous error will be terminated. Any diagnostic information is lost.

NRTC550

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTC550   ONE OR MORE TASKS PERMANENTLY PENDED. TAKE SLED

Meaning

One or more tasks were put into the permanent wait state
"Pended Indefinitely" during the session.

Response

As this is a diagnostic crash, take SLED.

NRTKILL

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTKILL   TASK TERMINATED BY /CANCEL ...,KILL

Meaning

The operator or system administrator issued the command
/CANCEL ...,KILL for this task.

Response

NONE

NRTK100

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTK100   RELEASE OF PCB NOT POSSIBLE DUE TO MISSING ADF

Meaning

The dsl processing routine gave a bad return code, i.e.
it was not possible to return to automatic storage area.
"Function detach" of the actual PCB was not possible,
therefore the task had to be abnormally terminated.

NRTK101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTK101   ERROR AT CANCEL RELEASE ROUTINE

Meaning

The reasons for this error can be:
1. The Command Processor was called incorrectly.
2. The Command Processor calls incorrectly the cancel release routine.
3. The PCB link mechanism is inconsistent.
4. The indicator "CANCEL REQUESTED" was set wrongly.

NRTK109

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTK109   THIS TASK WITH USERID (&00), JOBNAME (&01) ISSUED A CANCEL COMMAND FROM THE TERMINAL (&02) FOR TASK (&03)

Meaning

This task with the USERID (&00) and the jobname (&01) has cancelled the
the task with the Task Sequence Number (&03).
If the canceller is a dialog task, the terminal (&02) is named;
otherwise the terminal is given as BATCH.

Response

NONE

NRTK201

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTK201   SHUTDOWN SOON (&00)

Meaning

The terminal user is informed that the session will be terminated by
the /SHUTDOWN command soon. The operator can specify an explaining
text (&00).
No further jobs will be started in this session.

Response

Terminate processing as soon as possible.

NRTP200

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP200   ABNORMAL TASK TERMINATION DUE TO USE OF AN ENVIRONMENT NOT SUPPORTED BY THE PROGRAM MANAGER

Meaning

The task was terminated abnormally because the called routine
requests an environment that is not supported by the Program Manager.

Response

Take dump to determine the erroneous routine.

NRTP201

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP201   ABNORMAL TASK TERMINATION DUE TO OVERFLOW OF A NON-EXPANDABLE STACK

Meaning

The task was abnormally terminated because the requested amount of
dynamic storage exceeds the size of the program stack and it is not
possible to expand the stack (resident or real time stack).

Response

Take dump to determine the reason for the stack overflow.

NRTP202

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP202   ABNORMAL TASK TERMINATION DUE TO STACK UNDERFLOW

Meaning

The task was abnormally terminated because more dynamic storage
within the program stack was to be returned than had been requested
(one @EXIT to many).

Response

Take dump to determine the reason for the stack underflow.

NRTP203

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP203   ABNORMAL TASK TERMINATION BECAUSE REQUESTED ADF LENGTH EXCEEDS EXTENT LENGTH

Meaning

The Program Manager was called to provide an ADF that is longer than
the maximal extent length. Therefore the task was abnormally
terminated.

Response

Take dump to determine the erroneous routine.

NRTP204

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP204   ABNORMAL TASK TERMINATION BECAUSE GIVEN EXTENT LENGTH IS TOO SHORT

Meaning

The minimal length of a stack extent must be 400 bytes. When calling
the Program Manager, a smaller extent length was given.

Response

Take dump to determine the caller of the Program Manager.

NRTP205

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP205   ABNORMAL TASK TERMINATION DUE TO $REQM ERROR WHEN REQUESTING A STACK EXTENT

Meaning

It was not possible for the Program Manager to obtain a new stack extent.

NRTP206

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP206   ABNORMAL TASK TERMINATION DUE TO INVALID NON-LOCAL-GOTO DESTINATION

Meaning

The ADF given as destination of a non-local goto was not requested on
the current PCB level but on a PCB on a lower level.

Response

Take dump to determine the caller of the non-local goto function.

NRTP207

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP207   ABNORMAL TASK TERMINATION DUE TO A NON-LOCAL-GOTO TO AN ADF THAT DOES NOT EXIST

Meaning

The ADF given as destination of a non-local goto does not exist.

Response

Take dump to determine the caller of the non-local goto.

NRTP208

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTP208   ABNORMAL TASK TERMINATION DUE TO THE OVERWRITING OF THE STACK

Meaning

The task was terminated because stack management data in the stack
has been overwritten.

Response

Take dump to determine the overwriter. The overwriter can probably
be found in the uppermost ADF, which is addressed by the TCB field
ETCBPMSP. The overwriting is detected when the ADF is to be released.

NRTSHUT

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTSHUT   TASK TERMINATED BY /SHUTDOWN

Meaning

The operator has initiated system termination with the command /SHUTDOWN.
Therefore the task was aborted.

Response

NONE

NRTT101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTT101   ABNORMAL JOBSTEP TERMINATION (&00)

Meaning

The jobstep was abnormally terminated.
The cause is documented by the termination code (&00), which is a
message code and can be issued with the /HELP command.

Response

NONE

NRTT201

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTT201   TASK TERMINATION DUE TO /(&00)  COMMAND

Meaning

The task termination was caused by a /CANCEL-JOB resp. /CANCEL or a
/SHUTDOWN command.

Response

NONE

NRTT501

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTT501   SETS. (&00) (&01)

Meaning

The abbreviation "SETS" stands for "SYSTEM ERROR TERMINATED SESSION".
The running session is aborted. (&00) specifies the identifier of
a message that explains the cause for system termination. (&01) is an
insert to be interpreted together with the message specified by (&00).

Response

see manual "Operating"

NRTT502

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRTT502   SETS. (&00) (&01)

Meaning

The abbreviation "SETS" stands for "SERIOUS ERROR TERMINATED SESSION".
The running session is aborted. (&00) specifies the identifier of
a message that explains the cause for the system termination. (&01) is
an insert to be interpreted together with the message specified by (&00).

Response

see the Manual "Operating".

NRTV001

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRTV001   MONITOR SYSTEM FAILED

Meaning

The monitor system failed because of a system error.

Response

NONE

NRTV002

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRTV002   MONITOR SYSTEM NOT READY. RESTART HAS BEEN INITIATED

Meaning

Possible reasons:
- An automatic RESTART has been initiated after a system error in the
   monitor system
- SHUTDOWN with RESTART initiated in the monitor system
- SVP-RESTART initiated in the monitor system

Response

NONE

NRTV003

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRTV003   MONITOR SYSTEM READY AGAIN

NRT0001

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0001   ABNORMAL PROGRAM TERMINATION DUE TO TERM MODE=ABNORMAL

Meaning

Termination of the program has been requested by the program with the
help of the macro
TERM UNIT=PRGR,MODE=ABNORMAL

Response

NONE

NRT0002

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0002   NON-PRIVILEGED CALL OF TERM-INTERFACE FROM PRIVILEGED PROCESS

Meaning

The non-privileged TERM-interface was called from a privileged process
(TPR-PCB).
The Generative Components TERM, TERMD and TERMI are concerned as far
as they mean the Program and not the Jobstep termination.

Response

The call of the non-privileged TERM-interface must be replaced by
the call of the privileged $TERM-interface.

NRT0101

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0101   ABNORMAL PROGRAM TERMINATION DUE TO TERM UNIT=STEP,MODE=ABNORMAL

Meaning

Termination of the program has been requested by the program with the
help of the macro
TERM UNIT=STEP,MODE=ABNORMAL

Response

NONE

NRT0200

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0200   HARDWARE-DETECTED SOFTWARE ERROR FROM TPR

Meaning

An interrupt with one of the following interrupt weights has occurred
while executing TPR coding:
48, 54, 58, 5C, 60, 64, 68, 6C, 70, 74, 78.

Response

Take dump.

NRT0202

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0202   SYSTEM ERROR IN /LOGOFF PROCESSING

Meaning

The module NRTLGOF has been called for a system task or for a task
without a Termination work area.

Response

Take dump.

NRT0203

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0203   PAGING ERROR DUE TO HARDWARE ERROR IN TPR

Meaning

An interrupt with the event code 94 (paging error due to hardware error)
has occurred while executing task privileged (TPR) coding. 
The console hardcopy should be checked to determine if a message EXC0857
with the insert "PGER" has occurred shortly beforehand, as the error
may be a disk error.

Response

NONE

NRT0204

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0204   TASK TERMINATED DUE TO SUSPECTED DEADLOCK

Meaning

The task was terminated, because it is presumably in a deadlock
situation.

Response

Take dump.

NRT0205

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0205   HARDWARE ERROR IN TPR

Meaning

An interrupt with the event code 5E (Hardware Error) has occurred while
executing task privileged (TPR) coding.

Response

NONE

NRT0206

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0206   TASK RESTART IN TEST MODE NOT POSSIBLE DUE TO MISSING ADF

Meaning

The task had been enabled for task restart in test mode.
It was not possible to return to the automatic storage area active
at enable time. Therefore the task had to be abnormally terminated.

Response

NONE

NRT0207

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0207   ABNORMAL TASK TERMINATION BECAUSE THE TASK VECTOR COULD NOT BE OBTAINED

Meaning

It was not possible to obtain the task vector needed to activate
system exits. Therefore the task is terminated abnormally.

Response

NONE

NRT0208

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0208   ABNORMAL TASK TERMINATION BECAUSE THE SYSTEM VECTOR WAS NOT OBTAINED

Meaning

It was not possible to obtain the system vector to call system exits.
Therefore the task was terminated abnormally.

Response

NONE

NRT0601

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0601   INVALID TERM PARAMETER LIST

Meaning

The parameter list of the TERM macro issued by the program is either
inaccessible or contains one or more invalid parameter values.
Following TERM is executed instead:
TERM UNIT=PRGR,MODE=ABNORMAL,DUMP=Y

Response

Call TERM with a valid parameter list.

NRT0602

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0602   INVALID $TERMSPL PARAMETERLIST

Meaning

The entry NRTISPL to the module NRTINIT has been called with one or more
invalid parameters.

Response

Take dump.

NRT0603

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0603   INVALID $TERM PARAMETER LIST

Meaning

The given $TERM parameter list could not be interpreted by the module
NRTINIT.

Response

Take dump.

NRT0605

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0605   NRTINIT ERROR

Meaning

An error has occurred in the module NRTINIT or in a routine called by it:
- during the initialization of the termination work area
- during the initialization of the termination order
- during SERSLOG processing

Response

Take dump.

NRT0606

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0606   SYSTEM DUMP RETRY

Meaning

A system error occurred during the system dump called by termination.
The CDUMP function is retried. 

Response

NONE

NRT0607

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0607   ERROR DURING TERMINATION

Meaning

During Termination a called function returned a bad return code or was
aborted.
The corresponding diagnostic information can be found within the Soft-
ware-Error-Logging-File under the respective Rectype.
There are the following error cases:
1. Rectype NRT0101: Function gave a bad return code.
2. Rectype NRT0102: Repetitive calls during Termination.
3. Rectype NRTTRM1: Error during the STXIT-processing.

Response

NONE

NRT0608

Destination: USER-TASK             Routing code:                     Weight:  

Warranty   : NO

NRT0608   SYSTEM TASK RECOVERY WITH EXIT INSTEAD OF $TERM

Meaning

A Systemtaskrecovery-Routine may not terminate with EXIT. If a
continuation of termination is wanted, a new $TERM must be called.

NRT0610

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0610   TERMINATION CODE WAS NOT GIVEN CORRECTLY

Meaning

The pointer to termination code given within a general register
was an invalid address. This result was indicated by hard validation.
This message is the replacement for the non-accessible original
termination code of the $TERM-call.

NRT0611

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT0611   DEFAULT TERMINATIONCODE.

Meaning

For an abnormal task termination the termination code is not
supplied. Therefore a default termination code is used.

Response

NONE

NRT0700

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT0700   TSN (&00): ERROR AT TASK INIT ROUTINE (&01). TASK CREATION ABORTED

Meaning

(&00) : Task Sequence Number of the corresponding task.
(&01) : Name of the task initialization routine,
        which gave a bad return code to Creation.
Creation issues this Emergency-Message and initiates subsequently
the termination of this task.

Response

Partner for further diagnose is the responsible of the given
task initialization routine. He can give information about the reason
why the present bad return code was delivered.

NRT1200

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1200   SHUTDOWN WITH RUNTIME LIMIT REQUESTED BY '(&00)'. REMAINING RUNTIME: '(&01)'

Meaning

(&00) SHUTDOWN requester.
(&01) Remaining runtime in the form hh:mm.
After lapse of the given runtime the machine is stopped.

Response

NONE

NRT1201

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1201   SHUTDOWN REQUESTED BY '(&00)'

Meaning

(&00) SHUTDOWN requester.

Response

NONE

NRT1202

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1202   SHUTDOWN WITH AUTOMATIC RESTART INITIATED

Meaning

An Automatic Restart was specified with the SHUTDOWN request, i.e.
after system termination a system restart should be initiated.

Response

NONE

NRT1203

Destination: USER-TASK, CONSOLE    Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1203   SHUTDOWN WITH AUTOMATIC RESTART WITHDRAWN. DYNAMIC I/O CONFIGURATION CHANGES ARE STARTED

Response

An Automatic Restart was specified with the SHUTDOWN request, i.e. after
system termination a system restart should be initiated.
The command is rejected because dynamic I/O configuration changes are
started which may prevent a system restart.

NRT1204

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1204   SHUTDOWN END ALREADY BEING PROCESSED. REQUEST REJECTED

Meaning

NO FURTHER INFORMATION

Response

NONE

NRT1205

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1205   SHUTDOWN WITH AUTOMATIC RESTART AND IPL DEVICE CHANGE WITHDRAWN. SVP-FUNCTIONS NOT SUPPORTED

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with
a new IPL device should be initiated.
The request is rejected because the necessary SVP functions (GET/MODIFY
IPL DEVICE LIST) are not supported.

NRT1206

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1206   SHUTDOWN WITH AUTOMATIC RESTART AND IPL-DEVICE CHANGE WITHDRAWN. INTERNAL $HSVP ERROR

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with
a new IPL device should be initiated.
The request is rejected because an internal error occurred at $HSVP call.

NRT1207

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1207   SHUTDOWN WITH AUTOMATIC RESTART AND IPL DEVICE CHANGE WITHDRAWN. IPL DEVICE UNKNOWN

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with
a new IPL device should be initiated.                                
The request is rejected because the given IPL device is unknown to the
system.

NRT1208

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1208   SHUTDOWN WITH AUTOMATIC RESTART AND IPL DEVICE CHANGE WITHDRAWN. INTERNAL $NKBINF ERROR

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with 
a new IPL device should be initiated.                                
The request is rejected because an internal error ocurred at $NKBINF call.

NRT1209

Destination: CONSOLE               Routing code: * (main console)    Weight: 70

Warranty   : NO

NRT1209   AUTOMATIC RESTART INHIBITED BECAUSE IPL DEVICE WAS REMOVED BY DRV

Meaning

Automatic Restart cannot be switched on or is switched off because the
IPL device is removed by DRV.

NRT1210

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1210   SHUTDOWN WITH AUTOMATIC RESTART AND IPL DEVICE CHANGE WITHDRAWN. IPL DEVICE IS NOT A VALID DISK

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with 
a new IPL device should be initiated.
The request is rejected because the given IPL device either is not a disk
or else is invalid.

NRT1211

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1211   SHUTDOWN WITH AUTOMATIC RESTART AND IPL DEVICE CHANGE WITHDRAWN. IPL DEVICE IS NOT INSTALLED OR NOT ASSIGNED TO SYSTEM

Meaning

An Automatic Restart with IPL device change was specified with the
SHUTDOWN request, i.e. after system termination a system restart with 
a new IPL device should be initiated.                                
The request is rejected because the given IPL device is not installed or
else not assigned to system (virtual machine).

Response

If needed, first assign IPL device by means of ADD-VM-DEVICES.

NRT1212

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1212   SHUTDOWN WITH AUTOMATIC RESTART AND CHANGE OF IPL DEVICE WITHDRAWN: IPL DEVICE NOT ASSIGNED EXCLUSIVELY TO THE VM BY COMMAND.

NRT1213

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1213   SHUTDOWN WITH AUTOMATIC RESTART AND CHANGE OF IPL DEVICE WITHDRAWN: IPL DEVICE NOT ACCEPTED.

Meaning

Repeat SHUTDOWN: either choose now another IPL Device or initiate
an automatic Restart with the actual IPL Device.

NRT1215

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1215   SHUTDOWN REQUEST WITHDRAWN. ARCHIVE-TASKS ARE STILL ACTIVE

NRT1216

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1216   RUNNINIG ARCHIVE TASKS IGNORED. SHUTDOWN PROCESSING CONTINUES

NRT1219

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1219   INVALID VALUE '(&00)' FOUND IN SYSTEM PARAMETER SHUTPROC. DEFAULT VALUE 'BY-SHUTDOWN-CMD' ASSUMED

Meaning

(&00) Actual invalid value.
Valid values are 'BY-SHUTDOWN-CMD' or 'BY-ENTER-JOB'.

Response

Correct System Parameter SHUTPROC

NRT1220

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT1220   SHUTDOWN REQUEST BY '(&00)' ABORTED WITH ERROR '(&01)'

Meaning

(&00) SHUTDOWN caller.
(&01) Error cause with possible values
          1,2,..9: Internal Error (for System Diagnosis only)
          CMDxxxx: CMD-RC of /ENTER-JOB Command

Response

In case of Error-Code CMDxxxx check Command-File SYSENT.SHUTDOWN

NRT5001

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

NRT5001   NO SLOTPOOL FOR TASK-CREATION AVAILABLE

Meaning

No slot pool can be installed during task creation for building
a Task Control Block (TCB). Therefore it is not possible to
create dynamically any task during session.

Response

Take SLED.

NRT9005

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT9005   BOURSE PROBLEMS WITHIN THE COMMON LOG TASK.

Meaning

A bourse call within the Common Log Task received an unexpected
returncode.

Response

Take dump.

NRT9008

Destination: USER-TASK             Routing code:                     Weight: 99

Warranty   : NO

NRT9008   SYSTEM ERROR IN SERSLOG PROCESSING

Meaning

One of the system functions $RELM, $MSG, $SINF or "Complete Filename"
called by NRTELOG could not be executed correctly.

Response

Take dump.