Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0027 (&00) BUFFERTASK ERROR DURING '(&01)' MACRO PROCESSING FOR (&02). RC: '(&03)'.
Meaning
Error in buffertask of subsystem (&00) during call of the (&01) macro for
(&02).
(&00): subsystem name.
(&01): macro name.
(&02): reason for macro call.
(&03): return code from the macro.
NPC0029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0029 (&00) DMS ERROR FOR '(&01)'. DMS ERROR CODE: '(&02)'. ERROR INF IN SYSTEM MODE: /HELP-MESS DMS(&02)
Meaning
Error in subsystem (&00) while writing buffers. No more data are put
out to the file with linkname '(&01)'.
For more detailed information about the DMS error code enter the
SDF command /HELP-MESS or see the manual 'BS2000 System Messages'
or one of the BS2000 DMS manuals.
NPC0030
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0030 (&00) BUFFER TASK '(&01)' DISABLED
Meaning
After a DMS error in subsystem (&00) the buffer task puts out
no more data.
(&01): TSN of the buffer task.
Response
The data gathering should be brought to an end if all buffer tasks
are disabled.
NPC0033
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0033 ALL (&00) TAPES FOR '(&01)' WRITTEN. BUFFER TASK DISABLED.
Meaning
All tapes of (&00) file with linkname (&01) are written.
Response
The data gathering should be brought to an end if all buffer tasks
are disabled.
NPC0034
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0034 NUMBER OF VSNS FOR (&00) TAPE FILE '(&01)' IS ZERO. BUFFER TASK DISABLED.
Meaning
After RDTFT in buffer task of subsystem (&00) the number of VSN's
of '(&01)' is zero.
(&01): linkname of the file.
NPC0035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0035 KDCMON TERMINATED BY '/STOP-SUBSYSTEM KDCMON,FORCED=YES'.
Meaning
The system administrator has deleted the KDCMON subsystem, thereby
automatically terminating all tasks still connected to KDCMON.
NPC0036
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0036 '/RESUME-SUBSYSTEM' NOT SUPPORTED BY COSMOS. REASON FOR FOLLOWING DSSM MESSAGES.
NPC0037
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0037 COSMOS TERMINATED BY '/STOP-SUBSYSTEM COSMOS,FORCED=YES'
Meaning
The system administrator has deleted the COSMOS subsystem, thereby
automatically terminating all tasks still connected to COSMOS.
NPC0038
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
NPC0038 (&00) ERROR DURING '(&01)' MACRO PROCESSING FOR (&02). RC: '(&03)'.
Meaning
Error in subsystem (&00) during call of the (&01) macro for (&02).
(&01): macroname.
(&02): reason for macro call.
(&03): return code from the macro.
NPC0039
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0039 COSMOS FILE '(&00)' TOO SMALL FOR WRAP-AROUND OUTPUT
Meaning
The file with link name '(&00)' is too small for the output in the
wrap-around mode. The file must be allocated at least big enough for
the informations on the measurement, the module list, the configuration
and the events 4 and 8.
Response
Allocate more space for the file.
NPC0050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0050 ERROR IN COSMOS-PARAMS
Meaning
Invalid values in COSMOS-params.
The statement has been rejected.
NPC0051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0051 NO MEMORY SPACE ALLOCATED FOR FILE: (&00)
Meaning
Possible reasons:
- No memory space has been allocated for the file.
- The value of the primary allocation is smaller than the block size.
Response
Allocate the memory space by means of the command /MODIFY-FILE-ATTRIBUTES
NPC0052
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0052 REQUESTED FILE '(&00)' NOT CATALOGED IN PUBSET
Meaning
The requested file is not cataloged in the requested pubset.
Response
Create the file by means of the command /CREATE-FILE.
NPC0053
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0053 ERROR IN IC-LIST OF EIA-EVENT
Meaning
Invalid values in interruptcode-list of EIA-event.
The statement has been rejected.
NPC0054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0054 ERROR IN STATEMENT '//ADD-/REMOVE-COSMOS-EVENT'
Meaning
Invalid values in eventlist of command ADD-/REMOVE-COSMOS-EVENT.
The statement has been rejected.
NPC0055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0055 '//SET-COSMOS-PARAMETER' STATEMENT NOT SPECIFIED
Meaning
The statement //ADD-COSMOS-EVENT, //REMOVE-COSMOS-EVENT,
//MODIFY-COSMOS-PARAMETER, //INIT-COSMOS or //START-MEASUREMENT-PROGRAM
COSMOS cannot be specified unless //SET-COSMOS-PARAMETER statement
is specified.
The statement has been rejected.
Response
Enter the statement //SET-COSMOS-PARAMETER and repeat your original
entry.
NPC0056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0056 STATEMENT '(&00)' NOT ALLOWED
Meaning
The statement //SET-COSMOS-PARAMETER, //MODIFY-COSMOS-PARAMETER,
//ADD-COSMOS-EVENT or //REMOVE-COSMOS-EVENT are not allowed between the
statements //INIT-COSMOS and //START-MEASUREMENT-PROGRAM COSMOS.
The statement has been rejected.
NPC0057
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0057 SYSTEM ERROR DURING CREATE OF SUBSYSTEM COSMOS.
Meaning
Error in starting of the subsystem COSMOS during //INIT-COSMOS or
//START-MEASUREMENT-PROGRAM COSMOS.
You can determine the detailed error cause using the trace entries
of the //SHOW-SM2-STATUS function.
NPC0058
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0058 SYSTEM ERROR IN COSMOS-MODULES
Meaning
A system error has occured in COSMOS during program execution.
You can determine the detailed error cause using the trace entries of
the //SHOW-SM2-STATUS function.
NPC0059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0059 WARNING : '(&00)' NOT FOUND IN SYSTEM
Meaning
When defining the monitoring program COSMOS, an value (JOBNAME,CATEGORY,
TSN,USERID) for the parameter TASK-SELECTION was specified that could
not be found in the system at the time of the measurement initialization
or the measurement start.
NPC0060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0060 WARNING : MACRO-ERROR DURING COSMOS EXECUTION
Meaning
During COSMOS-execution a macro returned an error.
For more infos you can determine the detailed error cause using
the trace entries of the //SHOW-SM2-STATUS function.
NPC0061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0061 ERROR IN COSMOS-WRITETASK
Meaning
The buffer task for the file with linkname '(&00)' returns an error.
You can determine the detailed error cause using the trace entries
of the //SHOW-SM2-STATUS function.
NPC0062
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0062 MONITORING PROGRAM COSMOS ALREADY INITIALIZE. STATEMENT REJECTED
Meaning
An attempt was made to initialize the monitoring program COSMOS
that has already been initialize or start.
NPC0063
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0063 ERROR DURING START OF UTM MEASUREMENT. MEASUREMENT PROGRAM COSMOS NOT STARTED.
Meaning
Event UTM cannot be opened, because the subsystem UTM is not created.
Statement //INIT-COSMOS or //START-MEASURMENT-PROGRAM COSMOS rejected.
Response
Create subsystem UTM first and then start the COSMOS measurement.
NPC0064
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0064 ERROR DURING PROCESSING OF COSMOS MEASUREMENT FILE: '(&00)'
Meaning
You can determine the detailed error cause using the trace
entries of the //SHOW-SM2-STATUS function.
NPC0065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0065 INVALID FCBTYPE OF COSMOS MEASUREMENTFILE
Meaning
The indicated file exists already and does not have the FCBTYP PAM.
Response
Create a new file or access a file with correct FCBTYP PAM.
NPC0066
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0066 DMS-ERROR IN COSMOS-MEASUREMENTFILE '(&01)'. DMS-CODE '(&00)'. /HELP-MSG DMS(&00).
Meaning
For more detailed information about the DMS error code enter /HELP-MSG
or see the BS2000 manual 'System messages'.
NPC0067
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0067 ERROR DURING MACROPROCESSING 'DCAMPNSM'.
NPC0068
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0068 FILE WITH LINKNAME 'COSFIL' NOT FOUND.
Meaning
Possible reasons:
- The COSMOS measurement file assigned by LINK=COSFIL is not in the
COSMOS parameter list.
- The COSMOS measurement file assigned by LINK=COSFIL does not exist.
Response
Enter the statement //SET-COSMOS-PARAMETER with the COSMOS measurement
file assigned by LINK=COSFIL as parameter or create a COSMOS measurement
file with LINK=COSFIL.
NPC0069
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0069 ERROR DURING RDTFT-MACROPROCESSING.
NPC0070
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0070 SUBSYSTEM COSMOS NOT FOUND.
NPC0071
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0071 TO MANY MEASUREMENT FILES SPECIFIED.
Meaning
More than one measurement file for OUTPUT=*WRAP-AROUND(...) was
specified.
Response
Enter the statement //SET-COSMOS-PARAMETER with only one measurement
file for WRAP-AROUND.
NPC0072
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0072 WRONG MEASUREMENT FILE SPECIFIED
Meaning
For VM2000- and COSMOS-Events the same measurement file was specified.
Response
Correct the statement and try again.
NPC0073
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0073 MEASUREMENT FILE FOR VM2000-EVENTS NOT SPECIFIED
Meaning
Measurement file for VM2000-Events was not specified in statement
//SET-/MODIFY-COSMOS-PARAMETER.
Response
Correct statement and try again or close the VM2000-Events.
NPC0074
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0074 ERROR DURING START OF SUBSYSTEM BCAM-COS. MEASUREMENT PROGRAM COSMOS NOT STARTED.
Meaning
The event BCAM resp. BCPT cannot be opened, because the subsystem
BCAM-COS could not be loaded.
The instruction //INIT-COSMOS resp. //START-MEASUENT-PROGRAM COSMOS was
rejected.
BCAM-COS is not installed or has wrong version.
Response
Install subsystem BCAM-COS first and then start the COSMOS measurement.
NPC0075
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPC0075 ERROR DURING START OF SUBSYSTEM DCAM-COS. MEASUREMENT PROGRAM COSMOS NOT STARTED.
Meaning
The event DCAM cannot be opened, because the subsystem DCAM-COS could not
be loaded. Statement //INIT-COSMOS or //START-MEASURMENT-PROGRAM COSMOS
rejected.
DCAM-COS is not installed or has wrong version.
Response
Install subsystem DCAM-COS first and then start the COSMOS measurement.
NPC0100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPC0100 KDCMON version (&00) for BS2000 version (&01) started.