Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPACOPY Copyright (C) '(&00)' '(&01)' All Rights Reserved
NPALOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NPALOAD Program '(&00)', Version '(&01)' of '(&02)' loaded from file '(&03)'
NPA0001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0001 ASSIGNED INPUT FILE EMPTY
Meaning
The assigned SM2-PA input file with link name PADTA contains no records.
NPA0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0002 ASSIGNED INPUT FILE IS NOT A PA-FILE
Meaning
The input file with link name PADTA does not correspond to the format
of SM2-PA input files and therefore cannot be evaluated.
NPA0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0003 NO INPUT FILE ASSIGNED
Meaning
No input file is assigned by linkname PADTA
Response
Assign input file by means of //MODIFY-FILE-ASSIGNMENT statement and
then try again.
NPA0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0004 ERROR IN COMMAND /SET-FILE-LINK
Meaning
File couldn't be assigned by means of /SET-FILE-LINK
NPA0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0005 SVC FILE IS EMPTY
Meaning
The assigned SVC file is empty
NPA0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0006 ERROR IN SYNTAX OF SVC-FILE
Meaning
The syntax of assigned SVC file is not correct.
Response
Correct SVC file
NPA0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0007 NO OUTPUT FILE ASSIGNED
Meaning
no output file assigned by linkname PALST
Response
Assign an output file by means of //MODIFY-FILE-ASSIGNMENT statement and
then
try again.
NPA0051
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0051 SYSTEM ERROR WHEN PROCESSING SDF STATEMENTS. SDF-RC '(&00)'
Response
Contact the system administrator.
NPA0053
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0053 NO TASK SELECTED. STATEMENT REJECTED
Meaning
No TASK has been selected by means of the //SET-EVALUATION-OBJECTS
statement. As a result, task evaluation is not possible.
Response
Select the desired TASK by means of the //SET-EVALUATION-OBJECTS
statement and then try again.
NPA0054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0054 NO SELECTION WILL BE MADE
Meaning
The //SET-EVALUATION-OBJECTS statement has been issued with PROGRAM=*NONE
and TSN=*NONE, with the result that no selection will be made.
Response
Correct the statement and try again.
NPA0055
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0055 NO PROGRAM SELECTED, STATEMENT REJECTED
Meaning
No program has been selected by means of the //SET-EVALUATION-OBJECTS
statement. As a result, SVC or PCOUNTER evaluation is not possible.
Response
Select the desired program by means of the //SET-EVALUATION-OBJECTS
statement
and try again.
NPA0056
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0056 TASK INFORMATION MISSING. NO EVALUATION
Meaning
Information on taskstatistics could not be found in the
input file (LINK=PADTA). As a result, it is not possible
to prepare a taskstatistic.
NPA0058
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
NPA0058 OPERAND VALUE '(&00)' NOT CORRECT.
NPA0059
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0059 SELECTED PROGRAM CONTAINS NO SVC-INFORMATION
Meaning
no svc-information available for selected program
NPA0060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0060 SELECTED PROGRAM CONTAINS NO PCOUNTER INFORMATION
Meaning
no pcounter information available for selected program.
NPA0061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0061 ACCESS ERROR TO SDF SYNTAX FILE OR INCORRECT SYNTAX FILE
Meaning
No or a wrong or a nonaccessible syntax file is attached.
Response
Look for the attached syntax files via 'SHOW-SDF-OPTIONS' command.
Attach a new syntax file via 'MODIFY-SDF-OPTIONS' command.
NPA0151
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0151 SPECIFIED PROGRAM NAME '(&00)' DOES NOT EXIST
Meaning
The program name specified in the //SET-EVALUATION-OBJECTS statement is
not contained in the input file assigned via LINK=PADTA.
NPA0152
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0152 SPECIFIED PROGRAM '(&00)' DOES NOT EXIST IN SELECTED TASK '(&01)'
Meaning
The specified TSN does not exist in input file or by the TSN operand
selected
task does not contain the specified program.
Response
Get information about programs contained in the file (LINK=PADTA)
by means of the statement //SHOW-MEASURED-OBJECTS
NPA0153
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0153 SPECIFIED PROGRAM '(&00)' DOES NOT EXIST IN SELECTED TASK '(&01)' WITH GIVEN INDEX (INDICES) '(&02)'
Meaning
By TSN operand selected task does not contain any
by INDEX given program start of specified program.
Response
Get information about the different program starts of a program in the
task by means of the statement //SHOW-MEASURED-OBJECTS.
NPA0154
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0154 SPECIFIED TASK(S) '(&00)' DO(ES) NOT EXIST
Meaning
the tasks specified in the statement //SET-EVALUATION-OBJECTS are not
contained in the input file assigned via LINK=PADTA.
NPA0155
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0155 SPECIFIED TASK '(&00)' DOES NOT EXIST WITH GIVEN INDEX(ES) '(&01)'
Meaning
The task specified by indexes in the statement SET-EVALUATION-OBJECTS
is not contained in the input file assigned via LINK=PADTA
NPA0251
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0251 MODULE INFORMATION MISSING. NO EVALUATION
Meaning
Information on module names and the corresponding load addresses and
lengths of the modules could not be found in the input file (LINK=PADTA).
As a result, it is not possible to assign SVCs or PCOUNTER measurements
to particular modules (*MODULE or *SUMMARY evaluation).
Response
Possible reasons for the missing module information can be found in
the "SM2-PA" manual.
NPA0252
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0252 INVALID ADDRESS AREA. NO EVALUATION
Meaning
The start address specified either implicitly by *STD or explicitly by
X'..' string is greater than the end address specified in the same way.
As a result, evaluation is not possible.
NPA0253
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0253 SPECIFIED MODULE '(&00)' DOES NOT EXIST. NO EVALUATION
Meaning
The module name specified for the *MODULE evaluation could not be found
in the module information for the input file (LINK=PADTA).
- Either it contains a syntax error, or
- the modul is contained in an area that is deemed invalid because of
overlapping load addresses of different modules, or
- the modul has been unloaded before program termination (and thus before
the load address was specified).
NPA0255
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0255 SPECIFIED ADDRESS AREA NOT OR NOT COMPLETE IN MODULE
NPA0256
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0256 MORE THAN 2147483640 modules; Additional modules ignored
Meaning
Only 2147483640 modules can be handled.
NPA0353
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0353 NUMBER OF LINES GREATER THAN 32760. NO EVALUATION
Meaning
The number of table lines requested implicitly via the BY operand
(BY=BYTES) is greater than 32760.
NPA0500
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0500 NO PROGRAM SELECTED
Meaning
No program has been selected from the SET-EVALUATION-OBJECTS-MASK.
As a result, SVC or PCOUNTER evaluation is not possible.
Response
Select a program from the SET-EVALUATION-OBJECTS-MASK and try again
NPA0502
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0502 NO TASK SELCETED
Meaning
No task has been selected from the SET-EVALUATION-OBJECTS-MASK. As a
result,
task evaluation is not possible
Response
Select a task from the SET-EVALUATION-OBJECTS-MASK and try again
NPA0504
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0504 NO INPUT-FILE ASSIGNED
Meaning
No input-file (LINK = PADTA) is assigned for evaluation.
Response
Assign correct input-file
NPA0505
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0505 SELECTION NOT POSSIBLE
Meaning
The selection of:
- a module and a menupoint
- two or more menupoints
- two or more modules
- programs or tasks and the menuepoints 'SET-EVAL', 'PRINT',
'PRINT-EVAL' or 'END'
is not possible.
Response
Correct input
NPA0509
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0509 NO MODULE SELECTED
Meaning
No modul is selected for evaluation
Response
Select module and try again
NPA0511
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0511 MODUL-SELECTION IS CLEARED. DISPLAY FIRST PAGE
NPA0518
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0518 TO SELECT *** OUT OF MODULES *** IS NOT POSSIBLE
Meaning
PCount-evaluation for module *** OUT OF MODULES *** is not possible
NPA0520
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0520 INVALID CHARACTERS
Meaning
Invalid characters for FROM-, TO-ADDRESS, BYTES or LINES given.
Valid characters are: 0..9 A..F > 0 for FROM-, TO-ADDRESS
0..9 > 1 for BYTES, LINES
Y or N for definition of the handling of
zero-lines
Response
Correct input
NPA0521
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0521 NO SVC'S IN SPECIFIED ADDRESS-AREA
Meaning
There are no SVC's in specified address-area
NPA0522
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0522 INVALID ADDRESS AREA. NO EVALUATION
Meaning
Possible reasons:
- no FROM-Address given
- no TO-address, BYTES or LINES given
- address not within address area
- no different values for FROM- and TO-address given
- BYTES and LINES not possible at the same time
Response
Correct input
NPA0530
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0530 NUMER OF LINES GREATER THAN 32760. NO EVALUATION
Meaning
The number of lines is limited to 32760.
Response
Correct input
NPA0531
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0531 BYTE-INPUT TOO LARGE
Meaning
The byte-number exceeds the limit of the address-area
Response
Try lower byte-input
NPA0532
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0532 32 PROGRAMS SELECTED. SURPLUS PROGRAM-SELCTIONS IGNORED
Meaning
More than 32 programs of the same task or of different tasks were selected
in
the SET-EVALUATION-OBJECTS-Mask.
As the number of programs that can be evaluated is limited to 32.
Any surplus program-selections are ignored.
NPA0533
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0533 LINE INPUT TOO GREAT
Meaning
The line input exeeds the limit of address area
Response
Try lower line input
NPA0534
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0534 TWO DIFFERENT PROGRAMS SELECTED
Meaning
Two different programs were selected.
Only same programs can be evaluated.
Response
Correct program-selection
NPA0536
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NPA0536 MORE THAN 16 TASKS SELECTED. SURPLUS TASKS IGNORED
Meaning
More than 16 TSN's of the same task or of different tasks were selected
from
the SET-EVALUATION-OBJECTS-Mask. As the number of tasks that can be
evaluated
is limited to 16.
Any surplus task-selections are ignored