Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKRREVI COMP=NKRMF,VER=301,DATE=960705,COMPNR=22212301
NKR0000
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0000 NKR DETECTED SOFTWARE ERROR: (&00). TAKE DUMP
Meaning
The message is issued only during STARTUP.
(&00): description of the detected error.
NKR0001
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0001 '(&00)': SYSTEM RECONFIGURATION IMPOSSIBLE
Meaning
(&00) was to be detached by the operating system due to a hardware error.
The reconfiguration can, however, not be processed, as otherwise no
regular continuation of the session would be possible.
Response
1. Take dump (incl. HERS-file) and call hardware maintainance.
2. Check the I/O paths and the state of hardware units,
beginning with (&00).
NKR0006
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0006 SYNTAX ERROR IN COMMAND '(&00)'. COMMAND REJECTED
Meaning
(&00): reconfiguration command.
Response
Enter correct command.
NKR0007
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0007 INCONSISTENT NUMBER OF DEVICES IN DEVICE-RANGE.
Meaning
During computation of device addresses using first address and number of
devices the maximum possible value of X'FF' will be exceeded.
NKR0008
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0008 INCONSISTENT REPEAT FACTOR.
Meaning
The following errors are possible:
1) UNIT NAME not hexadecimal or not of 4 characters.
2) With specified REPEAT factor the admissible value range for mnemonics
will be exceeded.
NKR0009
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0009 *CHN AND *CTL MAY NOT BE MIXED IN PATH LIST.
Meaning
The specification of *CHANNEL(...) together with *CONTROLLER(...) ist not
possible in path list.
NKR0010
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0010 '(&01)(&00)': ATTACH-DEVICE NOT SUPPORTED.
NKR0016
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0016 MNEMONIC '(&01) (&00)' INVALID. MN IGNORED
Meaning
Unit (&01)(&00) is unknown in the system and has been ignored.
Response
Check specified mnemonic and unit-class and correct the command.
NKR0017
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0017 '(&02)(&00) (&03)(&01)': SPECIFICATION NOT PERMITTED. NO RECONFIGURATION POSSIBLE FOR THIS PATH
Meaning
Either one of the specified units (&02)(&00) and (&03)(&01) is unknown or
the path (&02)(&00) (&03)(&01) is unknown or the combination of specified
unit-classes is not allowed.
Response
Check specified mnmonics and unit-classes and correct the command.
NKR0018
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0018 DEVICE TYPE NOT SUPPORTED
Meaning
The type of the device is not supported in actual system version.
NKR0020
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0020 /DETACH-DEVICE FOR MN '(&01)(&00)' ACCEPTED
Meaning
At least one volume device for which I/O s are still to be performed
by the system, is to be detached.
The command will be executed after the end of all buffer I/O s, at
the latest after a waiting time of two minutes.
NKR0021
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0021 PATH '(&02)(&00) (&03)(&01)': /REMOVE-DEVICE-CONNECTION ACCEPTED
Meaning
At least one volume device for which I/O s are still to be performed
by the system is to be detached implicitly.
The command will be executed after the end of all buffer I/Os,
at the latest after a waiting time of two minutes.
NKR0022
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0022 (&01)(&02)(&00) ACCEPTED.
Meaning
The command (&00) will be processed for hardware unit (&01)(&02).
NKR0025
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0025 PATH '(&02)(&00) (&03)(&01)' INVALID
Meaning
The path between inner unit (&02)(&00) and outer unit (&03)(&01) is
physically not available and its configuration state is set to 'INVALID'.
This message is issued if the path is generated in BS2000 but not in the
IORSF.
NKR0026
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0026 '(&01)(&00)' INVALID
Meaning
Unit (&01)(&00) is physically not available and its configuration state
was set to 'INVALID'. The device is generated in BS2000, but not in the
IORSF.
NKR0030
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0030 PATH '(&02)(&00) (&03)(&01)' DOES NOT EXIST
NKR0031
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0031 '(&01)(&00)': CORRESPONDING CPU NOT AVAILABLE
Meaning
(&01)(&00): mnemonic of the I/O processor to be attached.
Response
Attach the relevant CPU, then try again.
NKR0033
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0033 '(&01)(&00)' IS THE ONLY OPERABLE BYTE-MUX CHANNEL
Meaning
The specified reconfiguration request would cause the last or only
operable BYTE-MUX channel to be detached.
NKR0034
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0034 RECONFIGURATION OF THE ONLY OPERABLE CONSOLE
Meaning
The specified reconfiguration request would cause the last or only
operable console to be detached.
NKR0035
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0035 PATH '(&02)(&00) (&03)(&01)' IS THE LAST INCLUDED PATH
Meaning
The reconfiguration request caused/would cause a removal of the last or
only path to
- a paging volume,
- a public volume,
- a communication device.
NKR0036
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0036 '(&01)(&00)': PUBLIC VOLUME MOUNTED
Meaning
As the hardware unit (&01)(&00) is vital for the system, a transition into
the state DETACHED-EXPLICITLY or DETACHED-IMPLICITLY is not permitted.
Response
Mount the volume first on another device by means of /CHANGE-DISK-MOUNT,
then try again.
NKR0037
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0037 '(&01)(&00)' MAY CURRENTLY NOT BE DETACHED
Meaning
The hardware unit with the mnemonic (&01)(&00) is still allocated.
Response
Try the appropriate reconfiguration command again with parameter FORCE=YES
or enter the /SHOW-DEVICE-STATUS command for more detailed information.
NKR0038
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0038 RECONFIGURATION OF A SINGLE CONSOLE HARDCOPY NOT ALLOWED
NKR0039
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0039 THE MAIN CONSOLE MAY NOT BE DETACHED
Response
Define another console as the main console by means of the /ASR command,
then try again.
NKR0040
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0040 '(&01)(&00)' ATTACHED
Meaning
The reconfiguration request has been performed successfully, the hardware
unit (&01)(&00) is attached.
NKR0041
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0041 HW UNIT '(&01)(&00)' ALREADY ATTACHED
NKR0042
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0042 '(&01)(&00)': ATTACH ACCEPTED
Meaning
The hardware unit (&01)(&00) will be attached after a necessary I/O has
been performed successfully.
NKR0044
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0044 '(&01)(&00)': ATTACHMENT REJECTED
Meaning
The hardware unit (&01)(&00) could not be attached. The reason for the
rejection has been explained in the preceding message(s).
For more detailed information on the error cause enter /HELP for the
corresponding messages, or see the manual 'System Messages'.
NKR0045
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0045 *** '(&01)(&00)' DETACHED ***
Meaning
The reconfiguration request has been performed successfully, the hardware
unit (&01)(&00) is detached.
NKR0046
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0046 '(&01)(&00)' DETACHED IMPLICITLY
Meaning
All inner paths of the unit (&01)(&00) are REMOVED-EXPLICITLY and/or
REMOVED-IMPLICITLY.
For more detailed information enter /SHOW-DEVICE-CONFIGURATION.
NKR0047
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0047 HW UNIT '(&01)(&00)' ALREADY DETACHED
NKR0048
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0048 *** '(&01)(&00)' DETACHED BY SYSTEM ***
Meaning
The reconfiguration request was initiated by the operating system,
because the hardware unit (&01)(&00) could not be accessed or produced
unrecoverable hardware errors. The request was successfully performed,
(&01)(&00) is detached.
Response
Check unit (&01)(&00) and call maintainance, if necessary.
NKR0049
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0049 '(&01)(&00)': DETACHMENT REJECTED
Meaning
The hardware unit (&01)(&00) could not be detached. The reason for the
rejection has been explained in the preceding NKR message(s).
For more detailed information on the error cause enter /HELP for the
corresponding NKR message(s), or see the manual 'System Messages'.
NKR0050
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0050 PATH '(&02)(&00) (&03)(&01)' INCLUDED
Meaning
The reconfiguration request has been performed successfully, the path
(&02)(&00) (&03)(&01) is included.
NKR0051
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0051 PATH '(&02)(&00) (&03)(&01)' ALREADY INCLUDED
Meaning
Path already included.
NKR0054
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0054 PATH '(&02)(&00) (&03)(&01)': INCLUDE REJECTED
Meaning
The path (&02)(&00) (&03)(&01) could not be included. The reason for the
rejection has been explained in the preceding NKR message(s).
For more detailed information on the error cause enter /HELP for the
preceding NKR messages, or see the manual 'System Messages'.
NKR0055
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0055 PATH '(&02)(&00) (&03)(&01)' REMOVED
Meaning
The reconfiguration request has been performed successfully.
NKR0056
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0056 PATH '(&02)(&00) (&03)(&01)' REMOVED IMPLICITLY
Meaning
Path is DETACHED-EXPLICITLY and/or DETACHED-IMPLICITLY.
Response
Enter /SHOW-DEVICE-CONFIGURATION for more detailed information.
NKR0057
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0057 PATH '(&02)(&00) (&03)(&01)' ALREADY REMOVED
Meaning
Path already removed.
NKR0059
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0059 PATH '(&02)(&00) (&03)(&01)': REMOVE REJECTED
Meaning
The path (&02)(&00) (&03)(&01) could not be removed. The reason for the
rejection is explained in the preceding NKR message(s).
For more detailed information on the error cause enter /HELP for the
preceding NKR message(s) or see the manual 'System Messages'.
NKR0060
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0060 HW UNIT '(&01)(&00)' ALREADY DETACH-PENDING
NKR0061
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0061 HW UNIT '(&01)(&00)' DETACH-PENDING EXPLICITLY
NKR0062
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0062 HW UNIT '(&01)(&00)' DETACH-PENDING IMPLICITLY
Meaning
(&00): mnemonic of a hardware unit.
All the inner paths of (&01)(&00) are REMOVE-PENDING EXPLICITLY and/or
REMOVE-PENDING IMPLICITLY.
Response
Enter /SHOW-DEVICE-CONFIGURATION for more detailed information.
NKR0064
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0064 HW UNIT '(&01)(&00)' DETACH-PENDING REJECTED
Meaning
The hardware unit (&01)(&00) could not be detached. The reason for the
rejection has been explained in the preceding NKR message(s).
For more detailed information on the error cause enter /HELP for the
preceding NKR message(s) or see the manual 'System Messages'.
NKR0065
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0065 PATH '(&02)(&00) (&03)(&01)' ALREADY REMOVE-PENDING
Meaning
No more commands affecting this path are accepted, if the parameter
FORCE=NO(...) is specified.
Response
Try again with parameter FORCE=YES, or wait until the path
(&02)(&00) (&03)(&01) is no longer REMOVE-PENDING (use the command
/SHOW-DEVICE-CONFIGURATION).
NKR0066
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0066 PATH '(&02)(&00) (&03)(&01)' REMOVE-PENDING EXPLICITLY
Meaning
Path in state REMOVE-PENDING EXPLICITLY.
NKR0067
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0067 PATH '(&02)(&00) (&03)(&01)' REMOVE-PENDING IMPLICITLY
Meaning
Unit (&02)(&00) is DETACH-PENDING EXPLICITLY and/or DETACH-PENDING
IMPLICITLY.
Response
Enter /SHOW-DEVICE-CONFIGURATION for more detailed information.
NKR0069
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0069 PATH '(&02)(&00) (&03)(&01)': /REMOVE-DEVICE-CONNECTION PENDING REJECTED
Meaning
The reason for this rejection has been explained in the preceding
NKR message(s).
For more detailed information on the error cause enter /HELP for the
corresponding NKR message(s) or see the manual 'System Messages'.
NKR0071
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0071 '(&01)(&00)' VARIED OFFLINE BY SVP
NKR0073
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0073 ALIAS DEVICE '(&00)' LINKED TO BASE DEVICE '(&01)'
Meaning
Device (&00) and (&01) both represent the same logical (parallel
access) volume.
Parallel I/O's for (&00) and (&01) to the same PAV volume can be
executed.
NKR0074
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0074 ALIAS DEVICE '(&00)' UNLINKED FROM BASE DEVICE '(&01)'
Meaning
Device (&00) is not available for PAV volume. See NKR0073.
NKR0075
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0075 DEVICE (&00) IS NOT A (&01) DEVICE
Meaning
Device (&00) is not a (&01) device.
NKR0076
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0076 BASE DEVICE FOR ALIAS DEVICE '(&00)' NOT ATTACHED.
Meaning
Attach for PAV alias device is not allowed if PAV base device is not
attached.
Response
Attach PAV base device.
NKR0080
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0080 '(&01)(&00)': INVALID INPUT FOR SVP. NO SVP ACTION PERFORMED
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor due to unexpected internal
data.
(&01)(&00): mnemonic of an I/O system or a channel.
Response
Take dump.
NKR0081
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0081 '(&01)(&00)': SYSTEM INTERFACE TRANSFER ERROR. NO SVP ACTION PERFORMED
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor due to interface problems.
(&01)(&00): mnemonic of an I/O system or a channel.
Response
If a DETACH-command was to be processed, the SVP-action for a channel can
be tried once more by a DETACH FORCE=YES-command.
NKR0082
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0082 '(&03)(&00)' COULD NOT BE VARIED OFFLINE DUE TO SVP-ERROR (&01). USE /HELP-MSG (&02)
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor due to issued
MSSFCALL-response. Use /HELP-MSG (&02) to get more informations.
(&01): MSSFCALL-response
Response
If necessary, contact the maintenance.
NKR0083
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0083 '(&03)(&00)' COULD NOT BE VARIED ONLINE DUE TO SVP-ERROR (&01). USE /HELP-MSG (&02).
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor due to issued MSSFCALL-
response. Use /HELP-MSG (&02) to get more informations.
(&01): MSSFCALL-response
Response
If necessary, contact the maintenance
NKR0084
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0084 '(&01)(&00)' COULD NOT BE VARIED OFFLINE BY SVP
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor (SVP).
(&01)(&00): Hardware unit to be varied offline
NKR0085
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0085 '(&01)(&00)' COULD NOT BE VARIED ONLINE BY SVP
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor (SVP).
(&01)(&00): Hardware unit to be varied online
NKR0086
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0086 '(&01)(&00)' FOREIGN. NO SVP ACTION PERFORMED
Meaning
The hardware action associated with the specified reconfiguration request
could not be executed by the service processor due to the hardware state
FOREIGN.
(&01)(&00): mnemonic of an I/O system or a channel.
Response
Connect (&01)(&00) to the own system.
NKR0090
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0090 NO RECONFIGURATION SLOT AVAILABLE. TRY LATER
NKR0091
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0091 TIMER EVENT COULD NOT BE SET. USE PARAMETER 'FORCE=YES'
Meaning
Problems when setting the timer events. ($NSETTI-Macro).
Response
Use the reconfiguration command with parameter FORCE=YES.
NKR0092
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0092 '(&01)(&00)': /DETACH-DEVICE PENDING ACCEPTED
Meaning
The timer event is set. The command will be executed after the allocations
have been returned or after the specified waiting time (default 15
minutes) has elapsed.
NKR0093
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0093 PATH '(&02)(&00) (&03)(&01)': /REMOVE-DEVICE-CONNECTION PENDING ACCEPTED
Meaning
The timer event is set. The command will be executed after the allocations
have been returned or after the specified waiting time (default 15
minutes) has elapsed.
NKR0094
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0094 SLOT POOL PROBLEMS. USE PARAMETER 'FORCE=YES'
Meaning
Software error when processing /DETACH-DEVICE or /REMOVE-DEVICE-CONNECTION
with specified waiting time.
Response
Use reconfiguration command with parameter FORCE=YES.
NKR0095
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0095 '(&01) (&00)': CANCEL PENDING IN PROCESS
Meaning
(&01) (&00): hardware unit or path between two hardware units.
NKR0096
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0096 '(&01) (&00)': PENDING STATE COULD NOT BE CANCELLED OR CANCEL PENDING IN PROCESS
Meaning
Cancel pending processing problems or CANCEL PENDING already in process.
Response
Use SHOW-DEVICE-CONFIGURATION to inform about configuration state.
If configuration state is DETACH-PENDING use the appropriate
reconfiguration command with the parameter FORCE=YES.
NKR0097
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0097 '(&01) (&00)': CANCEL DETACH-PENDING EXECUTED
Meaning
(&01) (&00) is again ATTACHED .
NKR0098
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0098 PATH '(&02)(&00) (&03)(&01)': /INCLUDE FOR A SECOND AVAILABLE PATH TO A TRANSDATA-DEVICE NOT ALLOWED
NKR0100
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0100 '(&01)(&00)': /UNLOCK-DEVICE REJECTED
Meaning
Possible reasons:
a) Device is not a disk, MBK or SCSI tape device.
b) Device characteristics for MBK or tape device unknown.
c) MBK or tape device already attached.
d) Device is 'detached implicitly' or 'detach pending implicitly'.
NKR0101
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0101 '(&01)(&00)': /UNLOCK-DEVICE ACCEPTED
Meaning
The requested unconditional unassign will be processed.
NKR0102
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0102 '(&01)(&00)': /UNLOCK-DEVICE PROCESSED
Meaning
The requested unconditional device deallocation has been processed.
NKR0103
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0103 '(&01)(&00)': /UNLOCK-DEVICE NOT PROCESSED
Meaning
The requested unconditional unassign could not be processed.
NKR0107
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0107 '(&02)(&00) (&03)(&01)': CANCEL REMOVE-PENDING EXECUTED
Meaning
(&02)(&00) (&03)(&01) is again INCLUDED.
NKR0110
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0110 '(&01)(&00)' ATTACHED AND ASSIGNED
NKR0111
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0111 '(&01)(&00)' ASSIGNED ELSEWHERE
Response
Check whether the hardware unit (&01)(&00) is free or used by another
system.
If it is free, reset hardware reservation by means of /UNLOCK-DEVICE.
NKR0112
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0112 '(&01)(&00)' COULD NOT BE ASSIGNED
Response
Check configuration and try again.
NKR0113
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0113 ASSIGNMENT FOR '(&01)(&00)' LOST
Response
Check whether the device (&01)(&00) is free or used by a foreign system.
If it
is free, attach it again.
NKR0114
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0114 '(&01)(&00)' UNASSIGNED
NKR0115
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0115 '(&01)(&00)' COULD NOT BE UNASSIGNED
Meaning
The device (&01)(&00) could not be unassigned.
Response
Reset the hardware-reservation for the device (&01)(&00) by means of
/UNLOCK-DEVICE.
NKR0116
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0116 ASSIGN FOR '(&01)(&00)' IN PROCESS
Meaning
The operating system attempts to assign the device (&01)(&00) for the own
system.
NKR0117
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0117 '(&01)(&00)' ASSIGNED
Meaning
The device (&01)(&00) has been assigned for the own system.
NKR0118
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0118 DEVICE '(&00)' RESERVED TO HOST WITH PATHGROUP-ID '(&01)'
Meaning
Check whether device (&00) is correctly reserved to host with
given pathgroup (&01). If reservation is held without good reason
break it by means of /UNLOCK-DEVICE.
Syntax of pathgroup: 11 times SYSID of the host or
Byte 1: SYSID, Bytes 2-7: CPU-ID, Bytes 8-11: IPL time.
NKR0119
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0119 DEVICE '(&00)' RESERVED TO GUEST SYSTEM '(&01)'
Meaning
Check whether device (&00) is correctly reserved to guest system
with index (&01). If reservation is held without good reason
break it by means of /UNLOCK-DEVICE.
NKR0120
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0120 '(&01)(&00)': DEVICE-TYPE INCONSISTENT
Meaning
Device-type and available device-features for device (&01)(&00)
inconsistent.
The device-type must be adapted to the available device-features or the
generated device-features must be made available.
After this the device may be attached.
NKR0121
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0121 RECONFIGURATION REQUEST FROM CONTROL UNIT (&00)
Meaning
A DETACH/ATTACH request has been executed by the control unit.
NKR0122
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0122 DEVICE ERROR ON SCD (&00), STATUS=X'(&01)', SB=X'(&02)'
Meaning
Please call maintenance!
Response
Enter any character
NKR0123
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0123 '(&01) (&00)' I/O ERROR
Meaning
I/O Error occurred during determination of device and controller
properties.
NKR0124
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0124 '(&00)'; NED1='(&02)' FOR CHN='(&01)' AND NED2='(&04)' FOR CHN='(&03)' NOT EQUAL
Meaning
Different Node Element Descriptors NED1 and NED2 for device (&00)
on channel paths (&01) and (&03).
Meaning of NED1 and NED2 for FC channel:
Last 5 digits of System Serial Number /
Last 3 digits of Device Serial Number /
INQUIRY byte 0
Response
Check configuration.
Possible invalid attachment or wrong I/O definition file.
Possible wrong attachment of the LUN to one of the paths
for FC channel.
NKR0125
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0125 ********** CONFIGURATION CONFLICT **********
Meaning
BS2000 has detected a configuration conflict.
See following NKR message.
Response
Call maintenance !
NKR0126
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0126 DEVICE '(&00)' NOT AVAILABLE FOR CHANNEL '(&01)'
Meaning
Device (&00) is not available for channel (&01).
Possible reasons:
- LUN Mapping not done.
Response
Call maintenance.
NKR0127
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0127 '(&01)(&00)': GS VOLUME NOT FOUND.
Meaning
$NDGCON issued the return code 00400002.
NKR0128
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0128 '(&02)(&00)': GS VOLUME, INTERNAL ERROR (&01).
Meaning
RC=0001: $NDGCON issued the error 00200001 (internal error).
RC=0003: $NDGCON issued the error 00010003 (parameter error).
NKR0129
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0129 '(&02)(&00)': GSVOL SUBSYSTEM PROBLEM, (&01)FFFF
Meaning
The connection to subsystem GSVOL was not successful. The return code
displayed describes the error.
NKR0130
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0130 RESERVATION OF THE I/O RECONFIGURATION DONE.
Meaning
The caller reserved the I/O reconfiguration (NKR) for his requests.
The reservation exists until the caller sends the "UNLOCK_NKR" OR ANOTHER
task sends the "UNLOCK_NKR FORCE=YES" request.
NKR0131
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0131 I/O RECONFIGURATION RESERVATION REJECTED.
Meaning
Reservation rejected because the caller is not owner of the system
privilege "NKRLOCK".
NKR0132
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0132 THE I/O RECONFIGURATION IS ALREADY RESERVED FOR THE CALLER.
NKR0133
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0133 THE I/O RECONFIGURATION IS BUSY,RESERVATION REQUEST REJECTED.
Meaning
Units in state "PENDING ", that means DETACH requests still running.
NKR0135
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0135 RESET OF THE I/O RECONFIGURATION RESERVATION.
NKR0136
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0136 THE I/O RECONFIGURATION IS NOT RESERVED,REQUEST REJECTED.
Meaning
The caller sends a request "Reset the I/O-Reconfiguration reservation",
but the I/O-reconfiguration is not reserved.
NKR0137
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0137 THE I/O RECONFIGURATION IS RESERVED FOR ANOTHER TASK,REQUEST/COMMAND REJECTED.
Meaning
The caller initiated a I/O reconfiguration request, but the I/O
recinfiguration is reserved for another TSN.
NKR0138
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0138 TASK IDENTIFIER OF CALLER UNKOWN,I/O RECONFIGURATION RESERVATION REQUEST REJECTED.
NKR0139
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0139 SYSTEMERROR, I/O RECONFIGURATION RESERVATION REQUEST REJECTED.
Meaning
In the validation routine of system privilege "NKRLOCK" an error occurred.
Please inform the system administrator.
NKR0140
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0140 DETACH FOR '(&01)(&00)' ALLOWED.
NKR0141
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0141 DETACH FOR '(&01)(&00)' NOT ALLOWED.
NKR0143
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0143 THE LAST OPERABLE CONSOLE IS GOING TO BE DETACHED
Meaning
The last operable console will be detached. There is still one other
attached but inoperable console.
Response
Make inoperable console operable.
NKR0144
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0144 VM GLOBAL I/O RECONFIGURATION PROCESSED WITH ERROR '(&00)'
Meaning
VM global I/O reconfiguration processed with error.
For further information see attached message and messages to
console.
NKR0145
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0145 REMOVE PATH '(&02)(&00) (&03)(&01)' ALLOWED.
NKR0146
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0146 REMOVE PATH '(&02)(&00) (&03)(&01)' NOT ALLOWED.
NKR0147
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0147 DEVICE '(&00)' NOT ASSIGNED TO GUEST SYSTEM.
Meaning
The device (&00) is not assigned to the guest system.
Response
Assign device to guest system (ADD-VM-DEVICE) and attach device
once more.
NKR0148
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0148 VM GLOBAL I/O RECONFIGURATION NOT ALLOWED
Meaning
A VM global reconfiguration request was rejected because the guest
system is protected against such modifications of the I/O
configuration by a system parameter.
Response
The VM global reconfiguration request will be no more rejected
if the reconfiguration is previously executed in guest system or
if the global /DETACH is executed with FORCE=UNCOND or
if the guest system protection is reset.
NKR0149
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0149 VM GLOBAL I/O RECONFIGURATION ACTIVE
Meaning
A global reconfiguration request from privileged VM is active.
Response
Wait and retry.
NKR0150
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0150 PATH BETWEEN (&00) '(&01)' AND (&02) '(&03)' NOT OPERATIONAL.
Meaning
Permanent I/O error on specified path.
Response
Check I/O units.
NKR0151
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0151 NED='(&00)' FOR DEVICE '(&01)' AND DEVICE '(&02)' EQUAL.
Meaning
The devices (&01) and (&02) have the same Node Element
Descriptor NED.
Response
Check configuration.
Possible invalid attachment or wrong I/O definition file.
NKR0155
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0155 VM NOT PRIVILEGED FOR IMPLICIT DEVICE ASSIGNMENT
Meaning
The virtual machine is not privileged for implicit device assignment
during ATTACH-DEVICE.
Response
Give the privilege to the VM or assign the device explicitly
by means of ADD-VM-DEVICE.
NKR0156
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0156 IMPLICIT ASSIGNMENT NOT PERMITTED FOR DEVICE '(&00)'
Meaning
Implicit assignment for device (&00) to virtual machine not
permitted with ATTACH-DEVICE.
Response
Allow implicit assignment for device to VM or assign device explicitly
by means of ADD-VM-DEVICE.
NKR0157
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0157 DEVICE '(&00)' ASSIGNED EXCLUSIVELY TO OTHER VM
Meaning
Device (&00) assigned exclusively to other virtual machine.
NKR0158
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0158 DEVICE '(&00)' CANNOT BE ASSIGNED TO VM '(&01)'
Meaning
Device (&00) cannot be assigned to virtual machine as a result of
internal error.
Response
Contact system administrator.
NKR0159
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0159 MAXIMUM NUMBER OF SHARERS FOR DEVICE '(&00)' ALREADY REACHED
Meaning
Device (&00) already attached by 16 sharers.
Response
Detach device by other system to allow new /ATTACH.
NKR0160
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0160 (&00) (&01) NOT DEFINED
Meaning
The io-unit (&01) is not defined.
Response
Correct and retry.
NKR0161
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0161 (&00) (&01) ALREADY DEFINED
Meaning
The io-unit (&01) is already defined.
Response
Correct and retry.
NKR0162
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0162 (&00) (&01) NOT DETACHED
Meaning
The io-unit (&01) is not detached.
Response
Detach io-unit (&01) and retry request.
NKR0163
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0163 (&00) (&01) REMOVED
Meaning
The io-unit (&01) has been removed.
NKR0164
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0164 (&00) (&01) OF TYPE (&02) ADDED
Meaning
The io-unit (&01) of type (&02) has been added.
NKR0165
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0165 (&00) (&01) MODIFIED
Meaning
The io-unit (&01) has been modified.
NKR0166
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0166 '(&00)' FOR (&01) (&02) REJECTED
Meaning
The required action for io-unit (&02) was rejected.
NKR0167
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0167 NO (&00) ENTRY FREE
Meaning
There is no free table entry for the io-unit in the system.
Response
Delete a no more used io-unit entry (DEL-IO-UNIT) and try again.
NKR0168
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0168 INTERNAL ERROR (&00)
Meaning
A system internal error has occurred.
Response
Try again.
NKR0169
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0169 CONFIGURATION UPDATE REJECTED
Meaning
The required configuration update action was rejected.
NKR0170
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0170 CONFIGURATION UPDATE REJECTED BY (&00) WITH RC = (&01)
Meaning
The required action was rejected by the component (&00) with return
information (&01).
NKR0171
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0171 '(&00)' FOR (&01) (&02) NOT SUPPORTED
Meaning
The required action for io-unit (&02) is not supported.
NKR0172
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0172 PATH TO (&00) (&01) NOT REMOVED.
Meaning
Path to io-unit (&01) not removed.
Response
Remove path and retry command.
NKR0173
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0173 CONFIGURATION UPDATE NOT SUPPORTED.
Meaning
The modification of the I/O configuration is not supported by the
operating system and/or the machine type.
NKR0174
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0174 CONFIGURATION UPDATE ALREADY ACTIVE.
Meaning
The START command for the modification of the I/O configuration has
already been given.
Response
Give your modification commands.
NKR0175
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0175 CONFIGURATION UPDATE STARTED.
Meaning
The modification of the I/O configuration has been started
successfully.
NKR0176
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0176 CONFIGURATION UPDATE NOT ACTIVATED.
Meaning
The START command for the modification of the I/O configuration has
not been given.
Response
Start the modification and try again.
NKR0177
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0177 CONFIGURATION UPDATE STOPPED.
Meaning
The modification of the I/O configuration is finished.
NKR0178
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0178 GUEST SYSTEM NOT PRIVILEGED FOR RECONFIGURATION.
Meaning
The guest system has not the privileg to execute the command.
Response
Retry on a privileged system.
NKR0179
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0179 RECONFIGURATION NOT PROCESSED BY GUEST SYSTEM '(&00)'.
Meaning
The command was rejected by guest system (&00).
Response
Look at console messages on guest system (&00) and check the reason
for the rejection.
NKR0180
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0180 NUMBER OF GUEST SYSTEMS RUNNING: '(&00)'. NUMBER OF GUEST SYSTEMS SUPPORTING RECONFIGURATION: '(&01)'.
Meaning
(&00) guest systems are running and (&01) guest systems are supporting
the reconfiguration.
Dynamic I/O configuration supported from OSD/V4.
VM global I/O reconfiguration supported from OSD/V5.
Response
Check for guest systems not supporting the reconfiguration.
The command will be executed only on the systems supporting
this function.
NKR0181
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0181 ERROR IN OPERAND '(&00)' ((&01))
Meaning
Error in operand (&00). For further information see (&01):
HIGH: Address or address range too high.
NSUP: Not supported.
UNIQ: Not unique. Addition: Name of device or control unit.
INCO: (&00)='CHANNEL-PATH-ID': Channel types inconsistent.
(&00)='*CONTROLLER': Control unit types inconsistent.
(&00)='CONTROLLER-ADDRESS': Control unit addresses inconsistent.
OUTR: Address not contained in address range. Addition: Range.
CUTY: Device type and control unit type inconsistent. Addition: Type.
MISS: Input missing.
ALLO: Input not allowed.
Response
Retry command with correct operand.
NKR0182
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0182 ADDRESS RANGE NOT UNIQUE ((&00))
Meaning
There is a conflict in the address range of the control unit to be
modified and the control unit (&00).
Response
Connect control unit to another channel or remove one of the two
control units and add it again with unique address range.
NKR0183
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0183 IORSF-CAPACITY INSUFFICIENT
Meaning
There is not enough free space in the active IORSF to add the requested
IO-unit.
Response
First remove all no more used IO-units with REMOVE-IO-UNIT, then try
again. If it's not possible, then write the active IORSF to the disk
with STOP-CONFIGURATION-UPDATE LEVEL=<n>. After an IMPL with this IORSF
and a new STARTUP new IO-units can be added again.
NKR0184
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0184 SVP-ERROR AT ACTION (&00), RC=(&01)
Meaning
The specified SVP-action was terminated with errors. The requested
modification of the active IORSF could not be executed.
Response
None.
NKR0185
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0185 ADDRESS (&00) NOT IN THE ADDRESS-RANGE OF CONTROLLER (&01)
Meaning
The requested device address is not included in the address range of the
given control unit stored in the IORSF.
Response
Correct the device address.
Otherwise correct the address range of the control unit with a REMOVE-
and following ADD-IO-UNIT command.
NKR0186
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0186 CMPG-ASSOCIATION FOR DEVICE (&00) NOT UNIQUE
Meaning
The attachments of the device to be added are devided in different CMPG-
entries in the IORSF. That means, that there are already devices in the
configuration, that have only a subgroup of attachments of this device.
The addition of the device to the IORSF is not possible.
Response
Decrease the number of attachments of the device.
Otherwise:
First remove all devices with a subgroup of the attachments of this
device, then add the device with the full number of attachments and
then add the other devices again.
NKR0187
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0187 DEVICE (&00) STILL ACTIVE
Meaning
The IORSF-Modification was not possible, because there was still an
Input-/Output operation running on this device.
Response
Retry request.
NKR0188
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0188 CHANNEL (&00) NOT UNIQUE
Meaning
The channel may be specified only once for the control unit or device.
NKR0189
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0189 MAXIMUM NUMBER OF CHANNELS FOR CONTROL UNIT OR DEVICE EXCEEDED
Meaning
To many channels defined for control unit or device.
NKR0190
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0190 SVP-REQUEST '(&00)' TERMINATED WITH ERROR '(&01)'. REFER TO /HELP-MSG (&02)
Meaning
The specified SVP-action terminated with errors. For further information
use /HELP-MSG (&02).
Response
See /HELP-MSG (&02).
NKR0191
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : YES
NKR0191 ACTIVE IORSF WAS WRITTEN TO LEVEL (&00)
NKR0192
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0192 OPERAND '(&00)' IGNORED.
Meaning
OPERAND (&00) IS IGNORED IN COMBINATION WITH OTHER OPERANDS.
NKR0193
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0193 WARNING; POSSIBLE INVALID ATTACHMENT. NO CONTROL UNIT WITH LOGICAL-ADDRESS = 0 FOUND FOR (&00) (&01)
Meaning
A control unit with a logical address greater than zero is given for a
channel link or a SCD link where no other control unit is defined with
logical address zero.
Response
The control unit will be added or modified; nevertheless you should
check the correctness of the control unit definition.
NKR0194
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0194 DYNAMIC I/O CONFIGURATION NOT SUPPORTED BY '(&00)' GUEST SYSTEM(S). COMMAND PHASE = '(&01)'. IGNORE ? (Y/N)
Meaning
(&00) guest system(s) with older version do not support dynamic
I/O configuration.
Phase=Check: The configuration update isn't yet started.
Phase=Process: The configuration update is possibly processed by
some guest systems.
Response
Answer with 'Y' to perform dynamic I/O configuration on the other
guest systems or answer with 'N' to terminate without execution.
NKR0195
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0195 '(&00)' GUEST SYSTEM(S) DIDN'T RESPOND TO RECONFIGURATION REQUEST. COMMAND PHASE = '(&01)'. IGNORE ? (Y/N)
Meaning
(&00) guest system(s) which do support the required function
didn't respond.
Phase=Check: The reconfiguration isn't yet started.
Phase=Process: The reconfiguration is possibly processed by
some guest systems.
Response
Answer with 'Y' to perform the reconfiguration on the other
guest systems or answer with 'N' to terminate without execution.
NKR0196
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0196 DYNAMIC I/O CONFIGURATION REJECTED BY GUEST SYSTEM '(&00)'. COMMAND PHASE = '(&01)'. IGNORE ? (Y/N)
Meaning
Configuration update request rejected by guest system (&00).
Phase=Check: The configuration update isn't yet started.
Phase=Process: The configuration update is possibly processed by
some guest systems.
Response
Answer with 'Y' to perform dynamic I/O configuration on the other
guest systems or answer with 'N' to terminate without execution.
NKR0197
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0197 OTHER GUEST SYSTEM(S) IN STARTUP PHASE.
Meaning
ACTIVE IORSF update not possible during startup of other guest
system(s).
Response
Retry command later.
NKR0198
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0198 WARNING; CHANNEL '(&00)' OF TYPE '(&01)' DEFINED FOR SAME SCD.
Meaning
There is already a channel of another type defined for the same SCD.
Check if different channel types are allowed for the SCD.
NKR0199
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0199 I/O TASK TERMINATED ABNORMALLY. TAKE DUMP
NKR0200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0200 COMMAND SUPPORTED ONLY WITH VM2000 VERSION 7 OR HIGHER
NKR0201
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0201 DYNAMIC I/O CONFIGURATION NOT SUPPORTED BECAUSE OF SHARED DEVICE '(&00)'
Meaning
Modification not allowed for shared devices.
NKR0202
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NKR0202 NUMBER OF GUEST SYSTEMS CHANGED SINCE START-CONF-UPD. COMMAND PHASE = '(&00)'. IGNORE ? (Y/N)
Meaning
Number of guest systems has changed since start of dynamic update
of I/O configuration. It may be possible that one guest system is
in restart processing.
Phase=Check: The configuration update isn't yet started.
Phase=Process: The configuration update is possibly processed by
some guest systems.
Response
Answer with 'Y' to perform dynamic I/O configuration or answer with
'N' to terminate without execution.
NKR0203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0203 CONFIGURATION LIMITS EXCEEDED ((&00) AT CHANNEL (&01))
Meaning
The requested update of the configuration would leed to a violation
of the configuration limits of the server.
The command is rejected.
NKR0204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0204 IDENTICAL DEVICE ADDRESSES OF (&00) AND (&01) AT CHANNEL (&02)
NKR0210
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0210 DEVICE '(&00)' NOT AVAILABLE
Meaning
- Device does not exist or
- no path available for device or
- device access prohibited by storage management tool or
- device not assigned to guest system.
NKR0220
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0220 ERROR IN $STAM-CALL FOR PUBSET '(&00)'; ERROR CODE = '(&01)'
Meaning
$STAM reports error. Error Codes:
NFND - MRSCAT entry cannot be found
CINV - CATID invalid
NINI - MRSCAT not initialized
INTE - Internal error
NPUB - Name of PUBRES device not in MRSCAT
NKR0221
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0221 DEVICE '(&00)' IS NO PUBRES/VOLRES DEVICE
Meaning
Device (&00) is no PUBRES/VOLRES device.
NKR0222
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0222 ONLINE CATALOG ON DEVICE '(&00)' DOES NOT CONTAIN NAMES OF PUBSET DEVICES
Meaning
The Online Catalog on device (&00) does not contain the names of
the devices belonging to the pubset. During import of the pubset
BS2000 (since OSD/V5) writes the device names into the Online
Catalog.
NKR0223
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NKR0223 MIRROR PUBSET (UNIT=(&00)) INCOMPLETE. CONTINUE ? (Y/N)
Meaning
Some standard volumes of the PUBSET doesn't have a mirror volume.
It is not possible to process the whole mirror PUBSET specified
by mirror volume (&00).
Response
Answer 'Y' to process as much mirror volumes as possible.
Answer 'N' to terminate.
NKR0224
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKR0224 $NDVGMN CALL FOR DEVICE '(&00)' REJECTED WITH ERROR '(&01)'
NKR0230
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0230 PATHGROUP STATE FOR DEVICE '(&00)' INCONSISTENT
Meaning
The control unit has another pathgroup state as BS2000.
Response
Reset paths to control unit.
NKR0240
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NKR0240 TAPE DEVICE(S) STILL ACTIVE