Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NKG0000 NDM detects software problem
Meaning
NDM (nucleus device management) has detected an inconsistency in NDM
oder I/O system tables or an error at an interface and has written an
entry in its error trace area. Extraordindary events are also indicated
in this manner.
If nessary an additional SERSLOG (software error logging) entry is
written.
The SERSLOG entry consists of an ID and the corresponding data.
Layout of the trace ID:
<fe> 1 character : A = NKA, D = NKD, G = NKG, S = NKS, R = NKR,
T = NKT, V = NKV, L = NKL (subsystem DRV)
NDM functional unit
<modul> 3 characters: short ID of an NDM module without prefix NK<fe>
<id> 4 characters: trace ID, in case of assembler moduls a label
###<id> exists
Example:
VDUTE1RE: FE=NKV, module=NKVDUTT, trace label=###E1RE
The contents of the trace data depends on the error case and in most
cases is described within the module at the corresponding NDMTRAC call.
Response
To detect or analyse the problem, a NDMDAMP could be helpful. Not all
SERSLOG entries describe an actual error, some entries can be "normal".
NKG0001
Destination: CONSOLE Routing code: T Weight: 50
Warranty : NO
NKG0001 DEVICE '(&00)' CANNOT BE ASSIGNED TO LOCATION '(&01)'. MAXIMUM NUMBER OF DEVICES FOR THIS LOCATION ALREADY REACHED
NKG0002
Destination: CONSOLE Routing code: T Weight: 50
Warranty : NO
NKG0002 DEVICE '(&00)' CANNOT BE ASSIGNED TO LOCATION '(&01)'
NKG0003
Destination: CONSOLE Routing code: T Weight: 50
Warranty : NO
NKG0003 DEVICE '(&00)' IS NOT ASSIGNED TO LOCATION '(&01)'
NKG0004
Destination: CONSOLE Routing code: T Weight: 50
Warranty : NO
NKG0004 DEVICE '(&00)' IS NOT ASSIGNED TO ANY LOCATION
NKG0005
Destination: CONSOLE Routing code: T Weight: 50
Warranty : NO
NKG0005 LOCATION '(&00)' NOT DEFINED
NKG0007
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
NKG0007 COMMAND NOT PERMITTED BECAUSE MAREN NOT IN SUBSYSTEM-CATALOG
NKG0008
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
NKG0008 THE SUBSYSTEM MAREN IS NOT CREATED
Meaning
Without the subsystem MAREN the command brings about that the specified
devices are permanently not available.
Response
Please start MAREN !
NKG0009
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
NKG0009 /REMOVE-DEVICE-DEPOT UNIT=*ALL,LOCATION='(&00)' NOT PROCESSED. THERE ARE ALLOCATIONS IN THE SPECIFIED LOCATION
NKG0010
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
NKG0010 DEVICE-DEPOT-COMMAND FOR DEVICE '(&00)' NOT PROCESSED. THE DEVICE IS NOT AVAILABLE
Meaning
If /SHOW-DEVICE shows FREE as ALLOC-STATE for the specified device, it is
nethertheless possible that the device is logically allocated by a type-
request.
Response
The command will be processed for the device if it is DETACHED.
NKG0011
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
NKG0011 THE DEVICE '(&00)' IS ALREADY ASSIGNED TO LOCATION '(&01)'
NKG0020
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
NKG0020 NDM trace is stopped bacause of stop condition