Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0001 /CANCEL-RUN-PROCESS: SPECIFIED RUN ID NOT FOUND
NBR0002
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0002 USER NOT ALLOWED TO CANCEL THE SPECIFIED /RUN SEQUENCE. /CANCEL-RUN-PROCESS REJECTED
Meaning
If the system parameter NBCONOPI is set to 'Y', a /RUN command sequence
may only be cancelled, if the issuer of the /CANCEL-RUN-PROCESS has the
privilege TSOS or the same operator Id. as the issuer of the /RUN comma
nd
NBR0007
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 00
Warranty : NO
NBR0007 SYSTEM ERROR IN MODULE NBRSMSG
Meaning
Task anchor function failed. Command cannot be processed
NBR0008
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR0008 MACRO CALL FAILED IN MODULE NBATOP
NBR0031
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0031 NO MESSAGE OUTSTANDING ON THE CONSOLE
Meaning
Reply to a /SHOW-PENDING-MSG command.
NBR0032
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0032 NO MESSAGE OUTSTANDING ON ANY CONSOLE
Meaning
Reply to a /SHOW-PENDING-MSG command.
NBR0033
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0033 NO MESSAGE MATCHES THE SPECIFIED SELECTION CRITERIA
Meaning
Response to a /SHOW-PENDING-MSG command.
NBR0034
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0034 ERROR IN PROCESSING OF COMMAND '/(&00)'; REASON: '(&01)'
Meaning
(&01): 1 = bourse error
2 = error in $MSG7X
3 = error in $NBSRV
4 = error in $TYPIO
5 = error in $TSNGET
6 = error in $GETMEM
NBR0086
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0086 THE MESSAGES FROM FOLLOWING USER-ID'S ARE SUBSCRIBED BY THIS CONSOLE:
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION. The list of the subscribed
messages will be output by the message NBR0090.
NBR0087
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0087 THE MESSAGES FROM FOLLOWING TASKS ARE SUBSCRIBED BY THIS CONSOLE:
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION. The list of the subscribed
messages will be output by the message NBR0090.
NBR0088
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0088 THE MESSAGES FROM FOLLOWING JOB NAMES ARE SUBSCRIBED BY THIS CONSOLE:
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION. The list of the subscribed
messages will be output by the message NBR0090.
NBR0089
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0089 THE MESSAGES FROM FOLLOWING CONSOLES ARE SUBSCRIBED BY THIS CONSOLE:
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION. The list of the subscribed
messages will be output by the message NBR0090.
NBR0090
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0090 (&00) (&01) (&02) (&03) (&04)
Meaning
This message contains a list of subscribed messages or message groups.
NBR0091
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0091 SOME MESSAGES SUBSCRIPTIONS IGNORED
Meaning
Output of the command MODIFY-MSG-SUBSCRIPTION. Some of the specified
messages were already subscribed or unsubscribed.
NBR0092
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0092 TELESERVICE MESSAGES ALREADY SUBSCRIBED BY CONSOLE '(&00)'
NBR0093
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0093 THE FOLLOWING MESSAGE KEYS ARE SUBSCRIBED BY THIS CONSOLE:
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION. The list of the subscribed
messages will be output by the message NBR0090.
NBR0094
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0094 THERE ARE NO SUBSCRIBED MESSAGES FOR THIS CONSOLE
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION.
NBR0095
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0095 UNSUBSCRIBED MESSAGES WILL NOT BE DELIVERED TO THIS CONSOLE
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION.
NBR0096
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0096 UNSUBSCRIBED MESSAGES WILL ALSO BE DELIVERED TO THIS CONSOLE
Meaning
Output of the command SHOW-MSG-SUBSCRIPTION.
NBR0200
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0200 COMMAND NOT YET AVAILABLE
Meaning
Server of the operator command still unknown or not available.
Response
Load command server (eventually subsystem) and retry command input.
NBR0600
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0600 THE LAST MESSAGE RECEIVED BY CONSOLE '(&00)' WAS PRODUCED (&01) MINUTES AGO
Meaning
(&00): console mnemonic or authorization name.
NBR0601
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR0601 SOME MESSAGES DISCARDED SINCE THE DESTINATION APPLICATION DID NOT RECEIVE THEM JUST IN TIME
NBR0602
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0602 MESSAGE JAM ON CONSOLE ((&00))
Meaning
For 1 minute or more none of the waiting messages could be output on this
physical console.
NBR0666
Destination: CONSOLE Routing code: * (main console) Weight: 45
Warranty : NO
NBR0666 PLEASE ANSWER CMD REQUESTS (MARKED WITH '&') WITH COLON AND QUESTIONS (MARKED WITH '?') WITH FULL STOP !
NBR0667
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0667 PLEASE ANSWER EMERGENCY QUESTIONS WITH DUMMY TSN
Meaning
The dummy TSN is P during startup and else E
NBR0668
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR0668 EMERGENCY QUESTION DEQUEUED
NBR0669
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0669 EMERGENCY QUESTIONS MUST BE ANSWERED FROM PHYSICAL CONSOLES
NBR0701
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0701 ROUTING BOURSE PROBLEM IN 'NBRMAIN'. A SNAP-DUMP WILL BE TAKEN
NBR0704
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0704 LOGGING BOURSE PROBLEM - SYSTEM CRASH
NBR0705
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0705 '(&00)' SUBSTITUTE CONSOLE FOR '(&01)'
Meaning
In reply to /CONSOLE HELP the current substitute console is displayed.
NBR0706
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0706 TEST OUTPUT FOR CONSOLE '(&00)'
Meaning
Test output in order to check console (&00). If this message appears on
another console, console (&00) is defective.
(&00): console mnemonic.
NBR0707
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0707 PROCESSING OF COMMAND '(&00)' FROM RUN SEQUENCE INITIATED
Meaning
If a command from a RUN sequence is routed for processing to the
relevant operator task by the UCON task, the RUN input originator is
notified accordingly.
NBR0708
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0708 NOT ALL QUESTIONS DISPLAYED
Meaning
There exist more open questions than displayed due to limit. Further
questions can be processed after answering some of these questions.
Response
Enter /STA MSG to display further questions when appropriate.
NBR0709
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0709 COMMAND CANCEL-RUN-PROCESS SIMULATED BY UCON FOR '(&00)'
NBR0710
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0710 'SWITCH OFF' OF MAIN CONSOLE NOT PERMITTED
NBR0711
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0711 CONSOLE '(&00)' SWITCHED OFF
NBR0712
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0712 CONSOLE '(&00)' SWITCHED ON
NBR0713
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0713 ALL CONSOLES INOPERABLE
Meaning
All physical consoles became inoperable. As long as no console is
available, the substitute console routine will produce no messages.
NBR0714
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0714 CONSOLE '(&00)' GETS ALL ITS FUNCTIONS BACK
NBR0715
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0715 CONSOLE '(&00)' SWITCHED ON BY SYSTEM
NBR0717
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0717 APPLICATION '(&00)' REJECTED. REASON: '(&01)'
Meaning
(&01): 1, syntactical error
2, invalid name
3, authorization name already assigned
4, invalid or missing password
5, permanent BCAM error
6, unauthorized station name, see class 2 option 'NBBAPRIV'
7, processor name not equal to home processor
see class 2 option 'NBBAPRIV'
8, task for password/chipcard check could not be created
9, no free entry in the application table; no connection possible
10, the application has authentified itself with an invalid chipcard
11, internal error during authentification; authentification aborted
12, the application should authentify itself with a chipcard, but
the DCAM version is < V10; an authentification is impossible
13, the application should authentify itself with a chipcard, but
the inputing terminal has no chipcard reader; an
authentification is impossible
14, the application sent a letter that is not part of the
authentification protocol; authentification aborted
15, subsystem for chip card authentification does not exist
16, KVP-protocol error
17, during the application connection a letter could not be sent
or received
18, equivocal Connection Id; repeat connection request
19, unknown operator identification (no JOIN-Entry for this
Op. Id.)
20, User Id. expired
?, other errors
NBR0718
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0718 INVALID 'NBRCONS' ORDER OR INVALID CONSOLE MNEMONIC IN NBRCONS ORDER. IGNORED ORDER:
Meaning
Possible reasons:
- the job sent to NBRCONS is incorrect.
- the entered console mnemonic does not exist.
The job cannot be executed.
An error logging entry is written.
NBR0719
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0719 'NBRCONS' ORDER REJECTED BY KTT BOURSE ROUTINE. REJECTED ORDER:
Meaning
Possible reasons:
- console mnemonic unknown to console driver task (KTT).
- invalid text length of the output.
The job cannot be executed.
An error logging entry is written.
NBR0720
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0720 $BTIMEL PARAMETER ERROR
NBR0721
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR0721 APPLICATION '(&00)' NO LONGER CONNECTED WITH '$CONSOLE'
NBR0722
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0722 COMMAND '/ASR' REJECTED; 'SUPPRESS' RESTRICTED TO PHYSICAL CONSOLES
NBR0723
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0723 '(&00)' '(&01)' MESSAGES HAVE BEEN SUPPRESSED
Meaning
The generation and output of '(&00)' '(&01)' messages has been suppressed
because of possible system overburdening. This became necessary because
the frequency of events leading to such a message exceeded the system
output speed.
NBR0724
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : YES
NBR0724 '/ASR' FUNCTION 'SUPPRESS' IS NO LONGER SUPPORTED. PLEASE USE COMMAND '/RESET-MSG-BUFFER'
NBR0725
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0725 THE /BROADCAST COMMAND HAS BEEN INCOMPLETELY PROCESSED; (&00) = (&01) + (&02) + (&03) + (&04) TASKS HAVE NOT RECEIVED THE BROADCAST TEXT
Meaning
(&01) - Number of tasks which have temporarily suppressed the broadcast
function
(&02) - Number of tasks which are in "hold" (pended indefinitely) or in
"destroy" and cannot receive the broadcast text
(&03) - Number of tasks for whom the activation of the contingency which
sends the broadcast text ran erroneously
(&04) - Number of tasks for whom the broadcast text could not be built,
due to a memory shortage
NBR0726
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0726 TASK IDENTIFIED BY STATION '(&00)' AND PROCESSOR '(&01)' NOT FOUND. /MESSAGE COMMAND CANNOT BE EXECUTED.
NBR0727
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0727 PARAMETER ERROR IN $POSTMS MACRO CALL.
Meaning
The macro $POSTMS was called with a false UNIT, FUNCTION or VERSION
number.
NBR0739
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0739 COMMAND /(&00) STILL WAITING FOR COMPLETION; INPUT COUNTER = (&01)
Meaning
After input of the command /SHUTDOWN the command /(&00) is not yet
completed and/or not removed from the administration in UCON. The number
of inputs of the same command is displayed in (&01). This message is
only output in system mode intolerant for diagnostic purpose
- (&00) : full command name
- (&01) : number of inputs
Response
Check the correct usage of GC $NBSRV in the command server of the
mentioned command
NBR0740
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0740 COMMAND COMPLETED '(&00)'; (RESULT: SC2=(&01), SC1=(&02), MC=(&03)); DATE: (&04)
Meaning
The command (&00) is terminated if it executes in an administrable mode.
The result (&01) and (&02) and also the message (&03) is corresponding to
the ISL rules.
ISL: Indirect Standard Procedure Linkage.
(&01)/(&02): subcode2/subcode1, return code
(&03) : main code, message number 7 characters.
NBR0741
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0741 COMMAND SUCCESS UNCERTAIN '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0742
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0742 COMMAND NOT ALLOWED '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0743
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0743 COMMAND NOT AVAILABLE '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0744
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0744 COMMAND '(&00)' NOT FOUND OR AMBIGUOUS ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0745
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0745 COMMAND ID INVALID : '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0746
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0746 COMMAND CANCELLED '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
Meaning
The command was cancelled either because of the input of
/CANCEL-RUN-PROCESS, or the disconnection of the input console.
NBR0747
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0747 COMMAND ID AMBIGUOUS : '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
Meaning
This command identifier is already given to another command.
Response
Type your command with another command identifier or wait until
the identifier is not in use anymore.
NBR0748
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0748 SYSTEM SHUTDOWN IN PROGRESS. COMMAND IGNORED '(&00)'; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
Meaning
No further command input from console is possible after /SHUTDOWN END
with exception of /SHOW-PENDING-MSG
NBR0749
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0749 COMMAND FROM /RUN FILE CANCELLED: '(&00)' ; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0750
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0750 D A T E : '(&00)'
NBR0751
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0751 REJ1 TEXT NOT RECOGNIZED..... : (&00)
NBR0752
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0752 ERROR DURING PROCESSING OF OPS-VARIABLE '(&00)'; (RESULT: SC2=(&01), SC1=(&02), MC=(&03))
NBR0753
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0753 REJ12 NBMHE/NBMAP ERROR IN PROTOCOL
NBR0755
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0755 REJ5 DESTINATION NOT FOUND... : (&00)
NBR0756
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0756 REJ6 NO MATCH FOR REPLY...... : (&00)
NBR0757
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0757 REJ7 USER NOT ALLOWED TO REPLY: (&00)
NBR0758
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0758 REJ8 CONSOLE SWITCHED OFF. INPUT IGNORED
NBR0759
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0759 REJ9 CONSOLE MN INOPERABLE. INPUT IGNORED
NBR0760
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0760 REJ10 QUESTION IDENTIFICATION ALREADY EXISTING
NBR0761
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0761 REJ11 MESSAGE CANNOT BE MATCHED TO AN ORDER
NBR0768
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0768 COMMAND PROCESSING INDUCED. PROCESS TERMINATION WILL NOT BE DISPLAYED
NBR0779
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR0779 RUN ID '(&00)'. READING OF /RUN COMMAND SEQUENCE COMPLETED
NBR0780
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR0780 COMMAND '(&00)' FORWARDED
NBR0781
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR0781 OPERANDS REPLACED WITH: '(&00)'
NBR0790
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0790 CONSOLE '(&00)' CONNECTED TO SYSTEM APPLICATION '$CONSOLE '
NBR0791
Destination: CONSOLE Routing code: * (main console) Weight: 50
Warranty : NO
NBR0791 CONSOLE '(&00)' DISCONNECTED FROM SYSTEM APPLICATION '$CONSOLE'
NBR0792
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0792 QUESTION '(&00)' FROM '(&01)' ANSWERED BY '(&02)'. REPLY: '(&03)'. MSG-ID: '(&04)'
Meaning
The question asked by (&01) having the serial number (&00) was answered
by (&02). The reply is sent to all authorized applications having
received this question. (&04) was the MSG-ID of the question.
NBR0793
Destination: CONSOLE Routing code: E Weight: 50
Warranty : NO
NBR0793 ANOTHER /RUN COMMAND ALREADY IN PROCESS. COMMAND SUSPENDED
NBR0796
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0796 RUN ID '(&00)'. MISSING OR INVALID PASSWORD IN /RUN COMMAND. COMMAND REJECTED
NBR0797
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR0797 APPLICATION '(&00)' CONNECTED WITH '$CONSOLE', PROCESSOR NAME '(&01)', STATION NAME '(&02)'
NBR080X
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR080X ERROR DURING OPR PARAMETER SERVICE PROCESSING OF DEFINE-CONSOLE. RESMODE VALUE NOT ALLOWED FOR THIS CONSOLE
NBR0802
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0802 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'DEFINE-CONSOLE'. CONSOLE (&00) HARDCOPY MODE HCC=Y FOR UNDEFINED HARDCOPY
Meaning
In OPR-Parameter DEFINE-CONSOLE the operand HCC=Y is made without the
corresponding operand HC=mn
Response
Add HC=mn in OPR-Parameter DEFINE-CONSOLE
NBR0804
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0804 INCORRECT SQE FROM ECTYP - SYSTEM TERMINATION
NBR0805
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0805 MESSAGE COUNTER UNDERFLOW - SYSTEM TERMINATION
NBR0806
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0806 SQE ACKNOWLEDGEMENT COUNTER UNDERFLOW - SYSTEM TERMINATION
NBR0807
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0807 $IBCAM PARAMETER ERROR IN UCON - SYSTEM TERMINATION
NBR0808
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0808 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF '(&00)'. NUMBER OF '(&01)' EXCEEDED
Meaning
An attempt was made to define more console mnemonics than entered in the
console table.
The number of entries is limited to 24.
The number of MSG IDs is limited to 50.
NBR0809
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0809 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF '(&00)'. (&01) CONSOLE MNEMONICS NOT DEFINED
Meaning
(&00): possible commands:
/DEFINE-CONSOLE
/SET-FILTER
(&01): number of console mnemonics
Response
Change the console mnemonics in the parameter file in accordance with the
console table
NBR0810
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0810 CLASS 2 OPTION 'MSGDEST' NOT PLAUSIBLE. INPUT IGNORED
Meaning
The console mnemonic or the application name does not exist. If there are
no meaningful values given for MSGDEST, the default value '<*' will be
assumed. Then console messages without destination will be sent to the
main console (and some other consoles having the authorization code '*')
NBR0812
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0812 THE COMMAND '(&00)' IS NO LONGER SUPPORTED
NBR0814
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0814 SNAP DUMP TAKEN DUE TO A SERIOUS $NBSRV ERROR
NBR0815
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0815 (&00)
Meaning
This message is used for output of lists by several commands.
NBR0816
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0816 $NBSRV WITH 'TYPE=BEGIN,BRIDGE=(&00)' INVALID
Meaning
The function $NBSRV was called with TYPE=BEGIN and an invalid
BRIDGE operand which does not point to a Store Queue Entry (SQE).
NBR0817
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0817 NBSRV COUNTER PROBLEM IN COMMAND SQE - CRASH
NBR0818
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0818 ERROR DURING PROCESSING OF COMMAND '/(&00)'. RESTART OF OPERATOR TASK
NBR0819
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0819 NBSRV REPORTS INVALID COMMAND ENVIRONMENT
NBR0820
Destination: CONSOLE Routing code: * (main console) Weight: 98
Warranty : NO
NBR0820 MAY '(&00)' BECOME MAIN CONSOLE? REPLY (Y=YES; N=NO)
Response
Y: console (&00) becomes main console
N: console (&00) does not become main console
NBR0821
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0821 COMMAND '/ASR MAIN' REJECTED BY THE MAIN CONSOLE
NBR0822
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0822 COMMAND '/ASR' REJECTED; 'MAIN' RESTRICTED TO PHYSICAL CONSOLES
Meaning
The operator command '/ASR MAIN' must neither be entered from
authorized applications nor from teleservice consoles
NBR0823
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0823 CONSOLE ALREADY MAIN CONSOLE. COMMAND '/ASR MAIN' IGNORED
NBR0824
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0824 '/ASR DEST': MESSAGES WITHOUT DESTINATION VALUE OUTPUT TO DEFAULT DESTINATION '(&00)'
NBR0825
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0825 '/ASR HELP': THIS CONSOLE IS '(&00)'
NBR0826
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0826 RUN ID '(&00)'. RECORD IN /RUN COMMAND FILE OR LIBRARY-ELEMENT TOO LONG. READING ABORTED
NBR0827
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0827 RUN ID '(&00)'. RECORD IN /RUN COMMAND FILE NOT RECOGNIZED. READING ABORTED
NBR0828
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0828 RUN ID '(&00)'. READING OF /RUN COMMAND FILE OR LIBRARY-ELEMENT ABORTED WITH COMMAND '/CANCEL-RUN-PROCESS'. SOME RECORDS IGNORED
NBR0829
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0829 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'DEFINE-CONSOLE'. CONSOLE '(&00)' NOT OF TYPE SKP
NBR0830
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0830 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'DEFINE-CONSOLE'. DEVICE WITH MN '(&00)' NOT OF TYPE CONSOLE
NBR0831
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0831 ERROR DURING OPR PARAMETER SERVICE PROCESSING. NUMBER OF 'APPLICATION NAMES' EXCEEDED - '(&00)' NOT ADDED
NBR0832
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0832 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'ADD-CMD-ENTRY'. CMD '(&00)' ALREADY EXISTS
Meaning
To add further SAME-NAME all other declarations must be identically with
original definition
NBR0833
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0833 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'ADD-CMD-ENTRY'. SAME-NAME '(&00)' ALREADY EXISTS OR TOO LONG
NBR0834
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0834 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'ADD-CMD-ENTRY'. CMD '(&00)' NOT ADDED
NBR0835
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0835 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF 'SET-CMD-CODE' CONCERNING CMD '(&00)'
NBR0836
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0836 MAXIMUM NUMBER OF OPERATOR COMMANDS EXCEEDED. CMD '(&00)' NOT ADDED
Meaning
The Operator Command Table contains already the maximum number of entries.
It is not possible to insert further commands
Response
Please check OPR Parameter Service
NBR0837
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0837 ERROR DURING OPR PARAMETER SERVICE PROCESSING OF '(&00)'. (&01) CONSOLE MNEMONICS NOT DEFINED FOR (&02)
NBR0838
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR0838 COMMAND (&00) WITHOUT COMMAND SERVER ENTRY ANNOUNCED
NBR0840
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NBR0840 THE CURRENT LOGGING FILE NAME IS '(&00)'
NBR0841
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0841 ERROR AT UCON BOURSE WITH IDENTIFIER: (&00). $NBSSIG/$NBRSIG/$NBCAN PARAMETER LIST: '(&01)'. SERSLOG RECORD WRITTEN
NBR0842
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0842 DUE TO CONTINGENCY ERROR RECORD '(&00)' NOT LOGGED ON SYSLST. $NCTING PARAMETER LIST: '(&01)'. SERSLOG RECORD WRITTEN
NBR0843
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0843 DUE TO TIAM ERROR RECORD '(&00)' NOT LOGGED ON SYSOUT. YTIPW PARAMETER LIST: '(&01)'. SERSLOG RECORD WRITTEN
NBR0844
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0844 ERROR WHEN RELEASING MEMORY OF SQE AT '(&00)'. $RETMEM-/(NBLOCK-) MAIN RETURN CODE: '(&01)'. SERSLOG RECORD WRITTEN
NBR0845
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0845 SYSTEM FUNCTION DURING PROCESSING IN OPR SUBSYSTEM PROCESSED UNSUCCESSFULLY. ABNORMAL TASK TERMINATION
NBR0846
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0846 SERIOUS PARAMETER ERROR IN TYPIO CALL. ABNORMAL TASK TERMINATION
NBR0847
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0847 ************ CLOG TASK TERMINATION AND RESTART - ONE RECORD MISSING IN THE LOGGING FILE ***********
Meaning
An abnormal task termination occurred during logging of an SQE. This SQE
has been written into the SERSLOG file.
NBR0848
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0848 THE TEXT '(&00)' COULDN'T REACH THE QUESTION SENDER BECAUSE OF CONTINGENCY ERROR. $NCTING PARAMETER LIST: '(&01)'
NBR0851
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0851 ERROR DURING COORDINATION OF MESSAGE AND REPLY - SNAP-DUMP AND ABNORMAL TASK TERMINATION
NBR0852
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0852 A TASK TRIED TO OUTPUT A COMMAND BOUND TEXT, BUT HAS NO COMMAND ENVIRONMENT
NBR0857
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0857 AFTER OUTPUT OF EMERGENCY MESSAGE SWITCH BACK TO PAGEABLE STORAGE NOT POSSIBLE
NBR0858
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0858 Output of emergency question without console table
NBR0862
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0862 MSG-ID : .. MSG-ID : .. MSG-ID : .. MSG-ID : ..
Meaning
The message whose message ID (message code) is marked with
* is suppressed for the console where the command has been issued.
+ is suppressed for other consoles or authorized applications.
*+ is suppressed for the console where the command has been issued
and for other consoles or authorized applications.
NBR0863
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0863 MSG-ID : .. SUPPRESSED ON:
NBR0864
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0864 SYNTAX ERROR
NBR0865
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0865 APPLICATION '(&00)' NOT FOUND
NBR0866
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0866 CONSOLE '(&00)' NOT FOUND
NBR0868
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0868 (&00) SUPPRESSED MESSAGES
NBR0869
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0869 (&00) SUPPRESSED MESSAGES IN SYSTEM
NBR0870
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0870 MESSAGE '(&00)' NOT SUPPRESSED
NBR0871
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0871 '/SHOW-MESS-SUPPR' NOT PROCESSED
NBR0872
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0872 MESSAGE '(&00)' SUPPRESSED
NBR0873
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0873 NO SUPPRESSED MESSAGES
NBR0874
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0874 MESSAGE (&00) WAS SUPPRESSED AT NONE OF THE SPECIFIED CONSOLES OR APPLICATIONS
Meaning
- The message (&00) is suppressed at some of the consoles or
applications which are not mentioned within the command.
- The suppression of message (&00) remains unchanged.
- For more information please use the command
SHOW-MESSAGE-SUPPRESSION
NBR0875
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR0875 DUE TO MEMORY SHORTAGE CURRENTLY NO FURTHER MESSAGES CAN BE MADE SUPPRESSABLE BY /SET-MESSAGE-SUPPRESSION
Meaning
Due to memory shortage the table of suppressable messages cannot be
extended. The command /SET-MESSAGE-SUPPRESSION could be executed
partially only or not at all.
Response
- Please enter the command /SHOW-MESSAGE-SUPPRESSION in order to
check whether and which modifications are done by the command
/SET-MESSAGE-SUPPRESSION .
- Please retry the command /SET-MESSAGE-SUPPRESSION later.
NBR0876
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0876 DUE TO MEMORY SHORTAGE IT IS CURRENTLY NOT POSSIBLE TO DISPLAY THE LIST OF MESSAGES WHICH ARE TO BE SUPPRESSED
Response
Please retry the command /SHOW-MESSAGE-SUPPRESSION later.
NBR0877
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0877 TABLE LOCK NOT GRANTED. THE COMMAND COULD NOT BE EXECUTED
Response
- Please retry the command later.
- If this message occurs permanently when entering some commands,
then please take a SLED.
NBR0881
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0881 MAXIMUM NUMBER OF SUPPRESSABLE MESSAGES REACHED
Meaning
The command /SET-MESSAGE-SUPPRESSION could be executed partially
only or not at all.
Response
- Please list all suppressd messages by means of
/SHOW-MESSAGE-SUPPRESSION .
- So you can check whether or which modifications are done by
/SET-MESSAGE-SUPPRESSION .
- Please cancel the suppression of some message, whose suppression
is less urgent, with the command /RESET-MESSAGE-SUPPRESSION ,
before you retry the command /SET-MESSAGE-SUPPRESSION .
NBR0882
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0882 '/SET-MESS-SUPPR' NOT PROCESSED
NBR0883
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0883 OPERAND 'CONSOLE' OR 'APPLICATION' MAY ONLY BE ISSUED FROM MAIN CONSOLE IF OPERATOR MODE 'WITHOUT LOGON'
NBR0884
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0884 COMMAND PARTIALLY EXECUTED
NBR0890
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0890 THE LAST FEW RECORDS OF THE CONSLOG FILE CAN'T BE READ
Response
If this information is desired, repeat /TURN.
NBR0891
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0891 BOURSE PROBLEM DURING PROCESSING OF /CHANGE-CONSLOG COMMAND, PLEASE CANCEL TASK '(&00)'
Response
Enter /CANCEL-JOB to cancel task
NBR0897
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0897 '/RESET-MESS-SUPPR' NOT PROCESSED
NBR0898
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0898 CMD RESERVED FOR CONSOLES
NBR0901
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0901 ROUTING BOURSE PROBLEM IN 'ECCLP' - RUN-READ-TASK TERMINATED
NBR0902
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0902 COMMAND BOURSE PROBLEM IN 'ECCLP' - RUN-READ-TASK TERMINATED
NBR0903
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0903 RUN BOURSE PROBLEM IN 'ECCLP' - RUN-READ-TASK TERMINATED
NBR0904
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0904 LAST POSSIBLE SERIAL NUMBER OF SYS.CONSLOG FILE REACHED. '/CHANGE-CONSLOG' NOT PROCESSED
Meaning
A new logging file (SYS.CONSLOG) cannot be opened. The command is not
processed, because console logging is mandatory.
NBR0905
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0905 CONSLOG INACTIVE
NBR0906
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0906 CONSLOG WILL BE TERMINATED
NBR0907
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0907 COMMAND '(&00)' EXECUTED FOR CONSLOG FILE (&01)
NBR0920
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0920 INVALID OPERAND VALUE IN '/MODIFY-CONS-OPTIONS'. (&00) VALUE '(&01)' USED
Meaning
Invalid operand value for:
- 'UPDATE-INTERVAL='
- 'MESSAGE-REPLACE-RATE='
- 'QUEUE-WARNING='
- 'PROTECTED-LINES='
(&00): MAXIMUM or MINIMUM
(&01): value.
NBR0921
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0921 MEMORY SHORTAGE. RETRY COMMAND LATER.
Meaning
A $GETMEM could not be processed.
NBR0922
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0922 '/MODIFY-CONS-OPTIONS' AS SPECIFIED ONLY PERMITTED FROM MAIN CONSOLE OR FROM AUTHORIZED USER PROCESS AND ONLY IF SYSTEM PARAMETER 'NBCONOPI = N'
Meaning
If the system parameter 'NBCONOPI' is set to 'Y', the command /MODIFY-CON
SOLE-OPTIONS can only be entered at the concerned physical console. Then
the parameter 'C-U' within the command is superflouos
NBR0923
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0923 THE COMMAND CONTAINS AN INVALID CONSOLE MNEMONIC. COMMAND NOT PROCESSED
Meaning
Possible error reasons:
- The operating works with "logical" consoles. A "logical" console
consists of one (device types CONSFK, CON3027 or CON3027C) or two
devices. The two devices that build a logical console are: a display
(device type CON38) and a hardcopy (device type CON3803 or CON3888).
The name of a "logical" console consisting of two devices is the name
of the display. If the mnemonic mentioned in the command is the name of
a hardcopy, the command will be rejected.
- The command was entered by an application and contains no console
mnemonic (C-U=*OWN is the implicit value); an application, not being a
console, cannot change it's parameters. The command will be rejected.
NBR0924
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0924 /M-C-O ENTERED FOR A CONSOLE WHOSE TYPE IS NOT CON38, BUT SOME OF IT'S PARAMETERS MAKE SENSE ONLY FOR THIS CONSOLE TYPE. COMMAND NOT OR INCOMPLETELY EXECUTED
Meaning
The console type is not CON38; only the parameters U-I and Q-W are
meaningful for non CON38 consoles. If existent, these parameters will be
executed; all other parameters will be ignored.
NBR0925
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0925 OPERAND VALUE 'F-H=NO' NOT ALLOWED
Meaning
The class 2 option NBKOPPEL does not allow the use of the operand 'F-H=NO'
in /MODIFY-CONS-OPTIONS
NBR0926
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0926 ERROR IN COMMAND SERVER. COMMAND NOT OR INCOMPLETELY PROCESSED
Meaning
Possible reasons:
- An invalid function or version number or an invalid action code in macro
$NBMCMN
- The order could not be sent to the Console Driver Task KTT (error in the
$NBCCALL macro execution)
- The KTT return information about the execution of the command could not
be received (error in macro $NBRSIG)
- Invalid KTT return code
- KTT return code <> "Command completed" or "False HSI". Possible reasons:
a) The command server sent KTT an invalid order
b) The KTT order contained an invalid console mnemonic
In most of the above cases, the operands U-I and / or Q-W, if present,
could have been executed
NBR0927
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0927 /MODIFY-CONS-OPTIONS COMMAND EXECUTION COMPLETED WITH ERRORS
Meaning
The command has been executed, but operand M-R-R or P-L had an invalid
value, which has been replaced with a standard, correct value.
NBR0928
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0928 THE /S-C-O COMMAND CANNOT SUPPLY ALL PARAMETER VALUES
Meaning
The command was entered for a console of device type CON3027 or
CON3027C, for which only the parameters U-I and Q-W are relevant; this is
why no values are given for the other parameters
NBR0940
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR0940 NO POINTER ON TCB OPERATOR AREA. COMMAND CANNOT BE EXECUTED.
NBR0941
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0941 I OP-BROADCAST I OP-MSG I SYSTEM-MSG I INFO-OUTPUT
NBR0942
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR0942 (&00)(&01)(&02)(&03)
NBR0950
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0950 SYNTAX ERROR: PARAMETER "TO=OPERATOR" NOT ALLOWED WHEN THE COMMAND COMES FROM A CONSOLE
NBR0951
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0951 ERROR DURING RELEASE OF MEMORY IN 'ECCOSOUT'
Meaning
Error occurred during the release of class 4 or class 5 memory (/TURN).
NBR0952
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0952 CONSOLE LOGGING NOT POSSIBLE WITH CLASS 2 OPTION 'NBLOGENF' BEING SET: SYSTEM CRASH
Meaning
The CLOG task cannot complete console logging. Class 2 option 'NBLOGENF'
forced a system crash. If the class 2 option had not been set, the system
would continue to work without console logging.
NBR0953
Destination: CONSOLE Routing code: * (main console) Weight: 98
Warranty : NO
NBR0953 ERROR DURING CONSOLE LOGGING PROCESSING. SHOULD ANOTHER WRITE BE STARTED AFTER CORRECTING THE ERROR ? REPLY (R=RETRY; H=HALT=SYSTEM TERMINATION)
Meaning
The operator can remove the error reason which prevented the CLOG task
from continuing the logging file (SYS.CONSLOG).
This is only possible if the class 2 option 'NBLOGENF' has been set.
Response
R: the CLOG task retries console logging.
H: the CLOG task causes a system crash.
NBR0954
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0954 MESSAGE FOR BATCH TASK WITH TSN '(&00)' NOT POSSIBLE
NBR0960
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NBR0960 MESSAGE (&00) ORDERED FOR TELESERVICE
NBR0961
Destination: USER-TASK Routing code: Weight:
Warranty : YES
NBR0961 NO MESSAGE ORDERED FOR TELESERVICE
NBR0962
Destination: USER-TASK Routing code: Weight:
Warranty : YES
NBR0962 MESSAGE (&00) WAS NOT ORDERED
NBR0963
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0963 MSG ORDER FOR (&00) MUSTN'T BE REMOVED
NBR0970
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0970 OPERATOR TASK WITH TSN '(&00)' CREATED FOR CONSOLE '(&01)'
NBR0971
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR0971 SHUTDOWN IN PROCESS. NO OPERATOR TASK CREATION
Meaning
After input of /SHUTDOWN GRADUALLY no further operator task is created.
NBR0972
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0972 OPERATOR TASK WITH TSN '(&00)' CREATED FOR PROCESSING OF /RUN COMMAND SEQUENCES
NBR0973
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0973 SYSTEM TASK CREATION FAILURE: SYSTEM TERMINATION
NBR0974
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0974 OPERATOR TASK WITH TSN '(&00)': 'COMMUNICATION-INTERVAL-LIMIT' EXCEEDED FOR COMMAND '/(&01)' FROM CONSOLE '(&02)'
Meaning
The Communication Interval Limit (CIL) for command processing in the
operator task has been exceeded. Processing continues in this task. For
further commands from this console a new operator task will be created.
NBR0975
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0975 MEMORY REQUEST FAILURE. SYSTEM TERMINATION
NBR0976
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0976 BOURSE CALL FAILURE: SYSTEM TERMINATION
NBR0977
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0977 LOCK MANAGER CALL FAILURE: SYSTEM TERMINATION
NBR0980
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0980 OPERATOR ROLE '(&01)' ASSIGNED TO OPERATOR ID '(&00)'
Meaning
The operator ID has all authorizations defined in the operator ROLE.
(&00): operator ID.
(&01): operator ROLE.
NBR0981
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0981 INPUT OF COMMAND '/(&00)' NOT PERMITTED FROM CONSOLE
Meaning
In the current compatible mode for the system operating (system
parameter NBCONOPI=N), the authorization of the operator with
Operator-Roles is not supported for consoles.
NBR0982
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0982 NO OPERATOR ID FOR APPLICATION '(&00)'
Meaning
The command was entered by an authorized application with no operator ID.
(&00): application name.
NBR0983
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0983 INTERNAL ERROR IN COMMAND SERVER OF '/(&00)'
Meaning
(&00): command name
NBR0984
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0984 OPERATOR ROLE '(&01)' REJECTED FOR OPERATOR ID '(&00)'. REASON: '(&02)'
Meaning
(&02): 0, no authorization for this operator ROLE
1, invalid operator ID
2, invalid operator ROLE
?, other errors.
NBR0985
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0985 OPERATOR ROLE '(&01)' ALREADY ASSIGNED TO OPERATOR ID '(&00)'
Meaning
The operator ROLE was already successfully requested by the operator ID.
(&00): operator ID.
(&01): operator ROLE.
NBR0986
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0986 OPERATOR ROLE '(&01)' NOT ASSIGNED TO OPERATOR ID '(&00)'
Meaning
The operator ID doesn't have the authorizations of the specified
operator ROLE.
(&00): operator ID.
(&01): operator ROLE.
NBR0987
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0987 NO OPERATOR-ROLE ASSIGNED TO OPERATOR ID '(&00)'
Meaning
The operator ID doesn't have any authorization for an operator ROLE.
(&00): operator ID.
NBR0988
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0988 OPERATOR ID '(&00)': ALL OPERATOR ROLES RELEASED
Meaning
The operator ID has released all formerly assigned operator ROLES.
(&00): operator ID.
NBR0989
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0989 OPERATOR ID '(&00)': NOT ALL REQUESTED OPERATOR ROLES ASSIGNED
Meaning
Not all operator ROLEs mentioned in the list could be assigned to the
own operator ID.
(&00) operator ID.
NBR0990
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0990 OPERATOR ID '(&00)': NOT ALL MENTIONED OPERATOR ROLES FOUND
Meaning
Not all operator ROLEs mentioned in the list are assigned to the own
operator ID.
(&00) operator ID.
NBR0991
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0991 INPUT OF COMMAND '/(&00)' NOT PERMITTED IN CMDFILE
NBR0999
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR0999 MESSAGE SATURATION. INTERVAL MODE (M-R-R=7) IN USE FOR CONSOLE '(&00)'
Meaning
The number of Store Queue Entries (SQE) waiting to be output on the
console (&00) is greater than half its permissible maximum. Therefore the
output speed is set to the maximum speed.
Message replace rate=7,
interval between two outputs=255 ms.
NBR1000
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1000 COMMAND '/RUN' RECEIVED. RUN ID '(&00)' ASSIGNED
NBR1001
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1001 RUN ID '(&01)'. READING OF /RUN COMMAND FILE '(&00)' STARTED
NBR1002
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1002 RUN ID '(&01)'. FILE '(&00)' SPECIFIED IN COMMAND '/RUN' INVALID OR DOES NOT EXIST. COMMAND REJECTED
NBR1003
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1003 RUN ID '(&00)'. READ ERROR DURING PROCESSING OF /RUN COMMAND SEQUENCE. READING ABORTED
Meaning
Records which have been successfully read before the read error
occured will still be processed.
NBR1004
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1004 RUN ID '(&00)'. READING OF /RUN COMMAND SEQUENCE INTERRUPTED BY COMMAND '/ASTOP'
NBR1005
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1005 RUN ID '(&00)'. COMMAND '/AGOGO' MISSING. WAITING TIME ELAPSED. READING OF /RUN COMMAND SEQUENCE CONTINUES
NBR1006
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1006 NO /RUN COMMAND SEQUENCE IN /ASTOP CONDITION. COMMAND '/AGOGO' IGNORED
NBR1007
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1007 RUN ID '(&00)'. COMMAND '/AGOGO' ACKNOWLEDGED. PROCESSING OF /RUN COMMAND SEQUENCE CONTINUES
NBR1008
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1008 RUN ID '(&00)'. COMMAND '/AGOGO' ACKNOWLEDGED. ANOTHER /AGOGO COMMAND EXPECTED
NBR1009
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1009 THE FOLLOWING ROUTINGCODES ARE NOT ASSIGNED TO '*IPL': (&00)
Meaning
Console display of messages sent via routing codes (&00) cannot be
guaranteed due to (possibly missing) DEFINE-CONSOLE- and SET-CODE-
Instructions in OPR parameter service. These messages might be written
to the logging file (SYS.CONSLOG.) only
Response
1.) Non-displayed messages can be shown with /TURN
2.) Please check instructions in OPR parameter service before starting
the next session
NBR1010
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1010 THE FOLLOWING ROUTINGCODES ARE NOT ASSIGNED TO ANY PHYSICAL CONSOLES: (&00)
Meaning
Console display of messages sent via routing codes (&00) cannot be
guaranteed due to (possibly missing) DEFINE-CONSOLE- and SET-CODE-
Instructions in OPR parameter service. These messages might be written
to the logging file (SYS.CONSLOG.) only
Response
1.) The mentioned routing codes can be assigned to some consoles with
/ASR ADD,...
2.) Non-displayed messages can be shown with /TURN
3.) Please check instructions in OPR parameter service before starting
the next session
NBR1011
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1011 RUN ID '(&01)'. RECORD '(&00)' READ
Meaning
Record '(&00)' read from /RUN command sequence. RUN ID '(&01)'
NBR1012
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1012 RUN ID '(&00)'. NUMBER OF /AGOGO-COMMANDS AWAITED IN /ASTOP-COMMAND CORRECTED TO (&01)
NBR1013
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1013 USER NOT ALLOWED TO ACKNOWLEDGE THE CURRENT /RUN SEQUENCE. /AGOGO REJECTED
Meaning
If the system parameter NBCONOPI is set to 'Y', a /RUN command sequence
may only be acknowledged, if the issuer of the /AGOGO has either the pri
vilege TSOS or the same operator id. as the issuer of the /RUN command
NBR1014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1014 A /RUN CMD WAS ENTERRED FROM A CONSOLE WHICH HAS BECOME INACTIVE OR INOPERABLE. /RUN CMD NOT PROCESSED
Meaning
If the system parameter NBCONOPI ist set to 'Y', /RUN sequences enterred
from consoles which became inactive or inoperable will not be started
NBR1015
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1015 RUN-ID '(&00)': SPECIFIED /RUN COMMAND FILE IS NOT SHARABLE OR PROTECTED BY GUARDS. /RUN CMD NOT PROCESSED
Meaning
The specified /RUN command file belongs to a foreign user and is
not sharable or protected by GUARDS even against reading access.
NBR1016
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1016 RUN ID '(&00)': SPECIFIED /RUN COMMAND FILE IS LOCKED. TRY LATER
NBR1017
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1017 RUN ID '(&00)': CATALOG NOT AVAILABLE. /RUN NOT PROCESSED
NBR1018
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1018 RUN ID '(&00)': /RUN COMMAND FILE IS EMPTY. /RUN COMMAND IGNORED
NBR1019
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1019 INCONSISTENT SQE CONCATENATION - SYSTEM TERMINATION
NBR1020
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1020 $NBCCALL LINKAGE OR BOURSE PROBLEM DETECTED BY NBRCONS
NBR1021
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1021 ERROR IN SQE RELEASE MECHANISM NBLOCK - SYSTEM TERMINATION
NBR1022
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1022 THE SEARCHED MESSAGE IS JUST TO BE SENT ONTO CONSOLE - DIAGNOSTIC SYSTEM TERMINATION
Meaning
The message number looked for by a diagnostic Rep in module ECTYP is
just to be sent onto console. The system will be terminated in order
to find the issuer of the message in the SLED
NBR1030
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1030 THE SET OF AUTHORIZATION-CODES MUST NOT BE MODIFIED FOR OR BY AUTHORIZED APPLICATIONS WITH DYNAMIC AUTHORIZATION NAMES. /ASR CMD REJECTED
NBR1031
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1031 '/ASR' COMMAND ONLY PARTIALLY EXECUTED, SINCE IT CONTAINS SOME ILLEGAL ACTIONS CONCERNING AUTHORIZED APPLICATIONS WITH DYNAMIC AUTHORIZATION NAMES
NBR1032
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1032 FILTER FOR AUTHORIZED APPLICATIONS WITH DYNAMIC AUTHORIZATION NAMES MAY ONLY BE MODIFIED BY THEMSELVES. /ASR COMMAND REJECTED
NBR1033
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1033 '/ASR' FUNCTION 'MAIN' IS NO LONGER SUPPORTED. PLEASE USE COMMAND '/REQUEST-MAIN-CONSOLE-FUNCTIONS'
NBR1034
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1034 '/ASR' FUNCTION 'DESTINATION' IS NO LONGER SUPPORTED. PLEASE USE COMMAND '/SHOW-SYSTEM-PARAMETERS' AND LOOK FOR SYSTEM PARAMETER 'MSGDEST'
NBR1035
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1035 THIS OPERAND COMBINATION IN '/ASR' COMMAND IS ILLEGAL WHEN SYSTEM PARAMETER 'NBCONOPI' IS SET TO 'Y'
NBR1036
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1036 THIS OPERAND COMBINATION IN '/ASR' COMMAND CAN ONLY BE PARTIALLY EXECUTED DUE TO SYSTEM PARAMETER 'NBCONOPI = Y'
NBR1042
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1042 CLASS 5 MEMORY SHORTAGE. COMMAND (&00) NOT PROCESSED. NO FILTERS CAN BE USED
NBR1043
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1043 /MODIFY-CONSOLE-OPTIONS NOT ALLOWED FOR APPLICATIONS SINCE SYSTEM PARAMETER 'NBCONOPI' IS SET TO 'Y'
NBR1050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1050 APPLICATION '(&00)' HAS NO CODES
NBR1051
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1051 APPLICATION '(&00)' CODES: (&01)
NBR1052
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1052 CONSOLE '(&00)' ASSIGNED CODES: (&01)
NBR1053
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1053 CONSOLE '(&00)' TEMPORARY CODES: (&01)
NBR1054
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1054 CONSOLE '(&00)' IMPLICIT CODES: (&01)
NBR1055
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1055 CONSOLE '(&00)' HAS NO ASSIGNED CODES
NBR1056
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1056 TASK '(&00)' HAS NO CODES
NBR1057
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1057 TASK '(&00)' CODES: (&01)
NBR1058
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1058 /SHOW-CONSOLE-STATUS: (&00) FURTHER APPLICATIONS WITH DYNAMICAL AUTHORIZATION NAMES ARE NOT CONNECTED
NBR1060
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1060 ROUTING-CODE '(&00)' NOT ASSIGNED
NBR1061
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1061 ROUTING-CODE '(&00)' FILTER NONE
NBR1062
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1062 ROUTING-CODE '(&00)' FILTER: (&01)
NBR1063
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1063 FILTER (&00) ROUTING-CODES: (&01)
NBR1064
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1064 FILTER (&00) ROUTING-CODES NONE
NBR1065
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1065 ALL FILTERS ROUTING-CODES: (&00)
NBR1066
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1066 ALL FILTERS ROUTING-CODES NONE
NBR1070
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : YES
NBR1070 'CONSOLE=*OWN' RESTRICTED TO CONSOLES
NBR1071
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1071 MAIN CONSOLE IS '(&00)'
NBR1072
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1072 CONSOLE '(&00)' DOES NOT EXIST
NBR1073
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : YES
NBR1073 NONE OF THE CONSOLE NAMES IN '/SHOW-CONSOLE-STATUS' FOUND. CMD REJECTED
NBR1074
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : YES
NBR1074 SOME CONSOLE NAMES IN '/SHOW-CONSOLE-STATUS' NOT FOUND. CMD ONLY EXECUTED PARTIALLY
NBR1075
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1075 APPLICATION '(&00)' PROCESSOR '(&01)' STATION '(&02)'
NBR1076
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1076 APPLICATION '(&00)' STATES: (&01)
NBR1077
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1077 CONSOLE '(&00)' STATES: (&01)
NBR1078
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1078 CONSOLE '(&00)' OPERATOR-ID '(&01)'
NBR1079
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1079 APPLICATION '(&00)' OPERATOR-ID '(&01)'
NBR1080
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1080 CMD RESTRICTED TO PHYSICAL CONSOLES
NBR1081
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1081 THIS CONSOLE IS THE MAIN CONSOLE. '/REQUEST-MAIN-CONSOLE-FUNCTIONS' IGNORED
NBR1082
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1082 '/REQUEST-MAIN-CONSOLE-FUNCTIONS' REJECTED BY THE MAIN CONSOLE
NBR1083
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1083 '/REQUEST-MAIN-CONSOLE-FUNCTIONS' BUSY. TRY LATER
NBR1084
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1084 '/REQUEST-MAIN-CONSOLE-FUNCTIONS' FAILED DUE TO MEMORY OR TASK SATURATION
NBR1085
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1085 ALLOW '(&00)' TO BECOME MAIN CONSOLE? REPLY (Y=YES, N=NO)
NBR1099
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1099 THE PARAMETER 'SYSLST' CANNOT BE USED BY CONSOLES
NBR1111
Destination: CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1111 NO OUTPUT OF COMMAND/SERVER-CONNECTION(S), SET OF CONNECTIONS EMPTY
NBR1112
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1112 NO COMMAND/SERVER CONNECTION, SPECIFIED ENTRY NAME NOT KNOWN AS SYMBOL FOR AN ENTRY ADDRESS
NBR1113
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1113 NO COMMAND/SERVER CONNECTION, COMMAND HAS ALREADY MAXIMUM NUMBER OF CONNECTIONS
NBR1114
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1114 NO COMMAND/SERVER DISCONNECTION, COMMAND/SERVER CONNECTION DOES NOT EXIST OR SERVER HAS STATIC DEFINITION
NBR1115
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1115 SEMANTICAL OPERAND ERROR
NBR1116
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1116 INTERNAL ERROR. INFORMATION FOR DIAGNOSTIC WRITTEN
NBR1117
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1117 COMMAND NAME '(&00)' NOT USABLE AS SAME-NAME
Meaning
Command name (&00) cannot be used as SAME-NAME because it is already
otherwise in use or it is not shorter than the related command name.
NBR1118
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1118 COMMAND /CONNECT-CMD-SERVER PROCESSED SUCCESSFULLY, BUT AT LEAST ONE SAME-NAME WAS REJECTED
Meaning
/CONNECT-CMD-SERVER was processed successfully. But at least one
command name specified as SAME-NAME was rejected because it is already
otherwise in use.
NBR1119
Destination: CONSOLE Routing code: K Weight: 99
Warranty : NO
NBR1119 COMMAND /CONNECT- OR /DISCONNECT-CMD-SERVER DOES NOT COME FROM A $CONSOLE APPLICATION
Meaning
The commands /CONNECT-CMD-SERVER or /DISCONNECT-CMD-SERVER cannot be
entered from a physical console, but only from $CONSOLE applications.
NBR1121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NBR1121 OPERATOR-TASK COULD NOT BE CONNECTED TO SUBSYSTEM SDF
Meaning
During the first processing of a command in an operator task, the
subsystem SDF could not be connected. The command was aborted.
Response
Please inform your system administrator.
NBR1122
Destination: CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1122 USE /HELP-MSG-INFORMATION MSG-IDENTIFICATION=NBR1123 FOR EXPLANATION OF OUTPUT
NBR1123
Destination: CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1123 STRUCTURE OF OUTPUT OF /SHOW-CMD-ATTRIBUTES:
Meaning
! Command !C!P!T!M! Server !CIL!A!P!
+-------------+ ! ! ! ! ! ! ! !
! Auth.-Code ! ! ! ! ! ! ! !
+---------------+ ! ! ! ! ! ! !
! Password P=yes ! ! ! ! ! ! !
! possible N=no ! ! ! ! ! ! !
+-----------------+ ! ! ! ! ! !
! Type I=int E=ext ! ! ! ! ! !
+-------------------+ +-----------+ ! ! !
! Method of call ! ! ! !
! D=direct S=SDF $=$CONSOLE ! ! ! !
! - =not available ! ! ! !
+---------------------------------+ ! ! !
! Comm.-Interval Unit = 5 seconds ! ! !
+-------------------------------------+ ! !
! Administrability A=yes N=no ! !
+---------------------------------------+ !
! Priority of server 1=max 4=min !
+-----------------------------------------+
NBR1124
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1124 COMMAND /CONNECT-CMD-SERVER WITH OPERAND COMPLETION-CONTROL=YES DOES NOT COME FROM APPLICATION WITH $CONSOLE-INTERFACEVERSION 2
NBR1125
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1125 COMMAND COMPLETED BUT AUTHORIZATION-CODE AND / OR SAME-NAME IGNORED
Meaning
Authorization code and / or command synonyms can be used only at first
definition
NBR1199
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1199 INTERNAL SYSTEM ERROR IN UCON-TASK
Meaning
During the processing of an operator command input from an user-task
a serious system error occured in the UCON-task.
Response
Please take a SLED and contact your customer support.
NBR1200
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1200 TASK '(&01)' FOR OPERATOR '(&00)' CONNECTED TO SUBSYSTEM OPERATING
Meaning
The connection to the subsystem operating was successfully completed for
the task (&01) of operator (&00). The SCI is available for this task.
NBR1201
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1201 TASK '(&01)' OF OPERATOR '(&00)' DISCONNECTED FROM SUBSYSTEM OPERATING
Meaning
The connection to the subsystem Operating of the task (&01) of operator
(&00) is lost. The SCI is no longer available for this task.
NBR1202
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1202 '(&00)' PARAM SETS FOR CONSOLES ONLY ALLOWED FOR *IPL
NBR1203
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1203 OPERAND 'REPLACEMENT' IN 'DEFINE-CONSOLE' PARAMETER SET IGNORED
NBR1206
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 66
Warranty : NO
NBR1206 COMMAND CODE '@' FOR COMMAND (&00) MANDATORY
NBR1207
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 66
Warranty : NO
NBR1207 SET-CODE PARAMETER ONLY FOR IPL CONSOLE ALLOWED
NBR1210
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1210 ERROR IN THE COMMUNICATION PROTOCOL BETWEEN USER-TASK AND UCON-TASK
Meaning
An error occured in the communication protocol between user-task (SCI)
and UCON-Task.
Response
Please repeat your command input.
NBR1211
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1211 THE USER-TASK COULD NOT BE CONNECTED WITH UCON
Meaning
The user-task could not be connected to UCON task. The connection is
necessary for the processing of the entered command.
Response
Please save your SERSLOG-file and contact your customer support.
NBR1212
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1212 INTERNAL ERROR DURING COMMAND PROCESSING
Meaning
An internal error occured during the common processing of an operator-
command in the user-task.
Response
Please save your SERSLOG-File and contact your customer support.
NBR1213
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1213 BOURSE EVENT FROM UCON-TASK FOR USER-TASK LOST
Meaning
A bourse event for the user-task was lost during the communication
between UCON-task and user-task. The processing of the command was
aborted.
Response
Please repeat your command input.
NBR1214
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1214 REPLY COULD NOT BE SENT TO THE SENDER OF THE PENDING MESSAGE
Meaning
The reply entered for the pending message as a part of the command
dialog could not be sent to the origin of the pending message. The
command processing was aborted.
Response
Please repeat your command input.
NBR1215
Destination: USER-TASK, CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR1215 INPUT COMMAND STRING EXCEEDS ALLOWED LENGTH
Meaning
The input command string exceeds the length of 2044 characters,
which is the maximal length for commands processed by the program
interface CMD.
Response
Please repeat your command input using abbreviations.
NBR1216
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1216 THE BCAM APPLICATION '$CONSOLE' COULD NOT BE ENABLED. 'ENABAP' RETURNCODE '(&00)'
NBR1217
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR1217 ENABLING THE BCAM-APPLICATION '$CONSOLE' WILL BE RETRIED
NBR1300
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR1300 PLAM VERSION (&00) USED FOR READING A /RUN PROCEDURE FROM LIBRARY
NBR1301
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1301 PROCESSING OF /RUN COMMAND ABORTED. DURING PROCESSING OF PLAM MACRO '(&00)' THE RETURNCODE (&01) OCCURED. RUN-ID '(&02)'
Meaning
A bad returncode (&01) occurred during execution of the
PLAM macro '(&00)'. The processing of the /RUN command was
aborted. Concerned RUN-ID '(&02)'.
Response
An explanation of the received PLAM returncode can be displayed
with '/HELP PLA(&01)' .
Please ask the system administrator to check the contents
and status of the library.
NBR1302
Destination: CONSOLE Routing code: E Weight: 70
Warranty : NO
NBR1302 READING ELEMENT '(&00)' OF LIBRARY '(&01)' STARTED. RUN-ID '(&02)'
NBR1303
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1303 RUN ID '(&00)': THE LIBRARY-ELEMENT SPECIFIED IN /RUN COMMAND IS EMPTY OR DOES NOT CONTAIN ANY RECORDS OF THE EXPECTED RECORD TYPE
Meaning
The library-element specified in the /RUN command is empty or does
only contain records which do not belong to the expected record type.
Only records with format A and record type 1 will be read and
processed.
NBR1304
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1304 RUN ID '(&00)'. THE LIBRARY ELEMENT SPECIFIED IN /RUN COMMAND IS LOCKED. PLEASE TRY COMMAND LATER
NBR1305
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1305 RUN-ID (&00): THE LIBRARY SPECIFIED IN /RUN COMMAND DOES NOT EXIST
Meaning
The library specified in /RUN command does not exist.
Response
Please check also the cat-ID, user-ID and the availability
of the catalogue.
NBR1306
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1306 THE LIBRARY SPECIFIED IN /RUN COMMAND EXISTS AS FILE, BUT IS NOT A LIBRARY
Meaning
The file specified as library in the /RUN command exists, but is
not a library.
Response
Please check the file attributes.
NBR1307
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1307 RUN ID '(&00)': LIBRARY-ELEMENT IN /RUN COMMAND NOT FOUND
Meaning
The library specified in /RUN command exists, but the specified
element cannot be found in the library.
Possible reasons:
- The element does not exist.
- The element-type is different from 'J'.
- The library is empty.
Response
- Please ask the system administrator to check the contents of
the library.
NBR1308
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1308 RUN-ID '(&00)': PASSWORD FOR LIBRARY IN /RUN COMMAND MISSING OR WRONG OR OTHER MISSING AUTHORIZATION
NBR1309
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR1309 RUN-ID '(&00)': PLAM NOT AVAILABLE. /RUN COMMAND WITH LIBRARY CURRENTLY NOT POSSIBLE
Meaning
The access method PLAM is currently not available. So /RUN commands
can only be processed if they do not use any libraries.
Response
Please contact the system administrator.
When PLAM is available again, the /RUN command can be repeated.
NBR1310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1310 RUN-ID '(&00)': THE FOREIGN LIBRARY SPECIFIED WITHIN /RUN COMMAND IS NOT SHARABLE OR PROTECTED BY GUARDS. COMMAND REJECTED
Meaning
The library or file specified in /RUN command belongs to a foreign
user and is either not sharable or protected by GUARDS against
reading access. The command cannot be processed.
Furthermore, it was to not possible to check whether the file
specified as library is really a library.
Response
Please contact the owner of the library or file.
NBR1311
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1311 PLAM VERSION (&00) TOO OLD. /RUN COMMAND REJECTED
Meaning
The used PLAM version (&00) is too old and not supported by the
/RUN command. The minimum PLAM Version is V3.4A. So /RUN commands
can only be processed if they do not use any library.
Response
Please contact the system administrator.
NBR1312
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR1312 THE LIBRARY SPECIFIED IN /RUN COMMAND IS MIGRATED.
Meaning
In order to avoid waiting times in the operating the /RUN command
was not processed.
Response
Please ask the owner or the system administrator for making the
library available again.
NBR2000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR2000 MEMORY SATURATION. CMD NOT PROCESSED
NBR3000
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3000 SYSTEM EVENT STREAM FILE '(&00)' OPENED
Meaning
The System Event Stream File '(&00)' was opened during the
successful initialization of the System Event Stream Task (SEST).
NBR3001
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3001 SYSTEM EVENT STREAM FILE '(&00)' REOPENED AFTER SUCCESSFUL RECOVERY OF SEST
Meaning
The System Event Stream File '(&00)' was reopened after the
successful recovery of the System Event Stream Task (SEST).
NBR3002
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3002 EVENT STREAM SERVICE TERMINATED NORMALLY
Meaning
The Event Stream Service was terminated normally during system
shutdown.
NBR3010
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3010 INITIALIZATION ERROR IN SEST. SYSTEM ESS NOT AVAILABLE.
Meaning
A serious error occured during the initialization of the System
Event Stream Task (SEST). ESS is not available during this session.
Response
Please contact your customer support.
NBR3011
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3011 RECOVERY ERROR IN SEST. SYSTEM ESS NOT AVAILABLE ANY MORE
Meaning
A serious error occured during the task recovery of the System
Event Stream Task (SEST). ESS for System Event Streams is no more
available during this session.
Response
Please contact your customer support.
NBR3012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3012 INITIALIZATION ERROR IN UEST '(&00)' OF USER ID '(&01)'
Meaning
A serious error occured during the initialization of the User
Event Stream Task '(&00)' for user-id '(&01)'.
Response
Please contact your system administrator.
NBR3013
Destination: CONSOLE Routing code: @ (conslog) Weight: 99
Warranty : NO
NBR3013 ERROR IN ESS. ES-TASK TERMINATED ABNORMALLY
Meaning
A serious error occured during the ESS-processing. The ES-task
was terminated abnormally.
Response
Please contact your customer support.
NBR3014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3014 TERMINATION ERROR IN UEST '(&00)' OF USER ID '(&01)'
Meaning
A serious error occured during the task termination of the User
Event Stream Task '(&00)' of user id '(&01)'.
Response
Please contact your system administrator.
NBR3015
Destination: CONSOLE Routing code: * (main console) Weight: 50
Warranty : NO
NBR3015 SPACE REORGANIZATION FOR SYSTEM EVENT STREAM FILE '(&00)' PROCESSED
Meaning
The space reorganization of the System Event Stream File is processed
because the size of file has already reached the size set by the value of
the class-2-system-parameter NBESSIZE.
The reorganization consists in elimination of the oldest records of the
file.
Response
The size of the System Event Stream File during a session depends
directly on the amount of produced system events and the setting of
synchronous events to be logged for all assigned event streams of type
system (command /ASSIGN-SYSEVENT ..., ADD-SYNCH-EVENTS=...).
NBR3016
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3016 PERMANENT DMS ERROR '(&00)' DURING PROCESSING OF THE SYSTEM EVENT STREAM FILE (R=RETRY / T=TERMINATE) ?
Meaning
A permanent DMS error occured during the processing of the SYSTEM EVENT
STREAM file. Accepted replies:
R=RETRY: Retry the DMS function after error processing i.e. task
recovery (default value).
T=TERMINATE: Terminate the processing of the SYSTEM EVENT STREAM file.
The System Event Stream Service is no longer available
in the current session.
Response
Take appropriate action to eliminate the reason for the DMS error.
Answer with T=TERMINATE, if the DMS error can't be eliminated.
Ignoring this situation may lead to serious shortages of system memory.
NBR3017
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3017 DMS ERROR '(&00)' DURING PROCESSING OF THE PUT-MACRO FOR EVENT STREAM FILE: (&01)
Meaning
During the processing of the PUT macro for the EVENT STREAM file the
specified DMS errors occured.
The internal error recovery was started.
Response
Take appropriate action to eliminate the error situation if possible.
NBR3018
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR3018 DMS ERROR '(&00)' DURING ACCESSING EVENT STREAM FILE: (&01)
Meaning
During an access to the EVENT STREAM file the specified DMS error
occured.
The internal error recovery was started.
Response
Please take an appropriate action to eliminate the error situation
if possible.
NBR3020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3020 *** TASK RECOVERY FOR TASK 'SEST' SUCCESSFULLY PROCESSED ***
Meaning
The task recovery of the System Event Stream Task 'SEST' was
successfully processed, after abnormal task termination due to an
internal error.
Response
Please contact your customer support.
NBR3021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3021 *** TIME SWITCH TO/FROM DAYLIGHT SAVING TIME TOOK PLACE ***
Meaning
In the meantime between logging of the previous and the actual record
the seasonal time switch to daylight saving time (or viceversa) took
place.
NBR3022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3022 INITIALIZATION ERROR IN UEST
Meaning
A serious error occured during the initialization of the User
Event Stream Task.
Response
Please contact your system administrator.
NBR3100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3100 EVENT STREAM '(&00)' WITH TSN '(&01)' ASSIGNED TO USER TASK '(&02)'
Meaning
Due to the command /ASSIGN-SYSEVENT the event stream '(&00)'
was assigned to user-task '(&02)'.
Response
With /ASSIGN-SYSEVENT TO=*DUMMY the assignment can be lifted.
NBR3102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3102 AMBIGUOUS LOG-ID '(&00)' FOR EVENT STREAM
Meaning
The selected LOG-ID for the event stream is ambiguous.
Response
Select other LOG-ID when entering the command /ASSIGN-SYSEVENT.
NBR3103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3103 NO EVENT STREAM ASSIGNED
Meaning
No event stream is currently assigned to the own user task.
Response
For assignment of an event stream enter the command /ASSIGN-SYSEVENT.
NBR3104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3104 NO EVENT STREAM MATCHES THE SELECTION CRITERIA
NBR3105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3105 NO EVENT STREAM EXISTENT
NBR3106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3106 EVENT STREAM '(&00)' ALREADY ASSIGNED, OPERAND OPEN-MODE=*CREATE REJECTED
Meaning
An already existing event stream can't be assigned with OPEN-MODE=*CREATE.
Response
Try the assignment with OPEN-MODE=*OUTPUT or OPEN-MODE=*EXTEND.
NBR3107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3107 USER EVENT STREAM FILE '(&00)' LOCKED, COMMAND REJECTED
Meaning
The user event stream file '(&00)' is currently locked and can't
be reopened.
Response
Check if any presentation function of ESS has opened the file
NBR3108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3108 EVENT STREAM '(&00)' DOES NOT EXIST
NBR3110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3110 EVENT STREAM '(&00)' CLOSED FOR TASK '(&02)' WITH USER ID '(&01)'
NBR3111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3111 ERROR IN CREATION OF UEST
NBR3112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3112 SYSTEM EVENT STREAM TASK 'SEST' NOT EXISTENT
Meaning
The ESS is not available for system event streams during this
session, because the task 'SEST' does not exist any more.
NBR3113
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3113 NO EVENT STREAM ASSIGNED, BECAUSE OF /SHUTDOWN QUIET IN PROCESS
Meaning
No new event stream will be assigned after the input of command
/SHUTDOWN QUIET.
NBR3114
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3114 REQUESTED ES-FILE '(&00)' NOT CATALOGUED
Meaning
The ES-File of the mentioned event stream is not catalogued, i.e.
the presentation of the event stream is not possible. The reason
is the recent termination of the event stream.
NBR3115
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3115 SUBSYSTEM FHS-TPR NOT AVAILABLE
Meaning
The subsystem FHS-TPR is not available. The presentation service was
terminated, because a preparation of output masks is not possible in
the moment.
NBR3116
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3116 LIBRARY CONTAINING NECESSARY FHS-MASKS NOT FOUND
Meaning
The Filename of the FHS-mask-library of the subsystems BS2CP and/or
FHS-TPR is invalid. The installation path couldn't be found neither with
IMON nor on the standard installation path (user-id TSOS).
Response
Please contact your system administrator.
NBR3199
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NBR3199 INTERNAL ERROR IN COMMAND SERVER
NBR4711
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NBR4711 '(&00)' ERROR IN MODULE '(&01)'. RETURN CODE '(&02)'
NBR4712
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR4712 '(&00)' ERROR IN MODULE NBOFILT - SERSLOG ENTRY WRITTEN
NBR4713
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR4713 '(&00)' ERROR IN MODULE NBOCSTA - SERSLOG ENTRY WRITTEN
NBR4714
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR4714 '(&00)' ERROR IN MODULE NBOMFRA - SERSLOG ENTRY WRITTEN
NBR4715
Destination: CONSOLE Routing code: E Weight: 99
Warranty : NO
NBR4715 '(&00)' ERROR IN MODULE NBORUNP - SERSLOG RECORD WRITTEN