Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 30
Warranty : YES
NAM0001 NEW ACCOUNTING FILE '(&00)' OPENED WITH 'SPACE=((&01),(&02))'
Meaning
(&00): name of the new accounting file
(&01): primary allocation
(&02): secondary allocation.
NAM0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0002 'FILE' MACRO ERROR. DMS ERROR '(&01)' WHEN PROCESSING ACCOUNTING FILE '(&00)'. COMMAND PROCESSING ABORTED. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
While processing an accounting command, the FILE macro returned a
DMS error code.
For more detailed information about this DMS error code, enter /HELP-MSG
in
system mode or see the BS2000 manual 'System Messages'.
(&00): name of the accounting file
(&01): DMS error code.
NAM0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0003 'FILE' MACRO ERROR. DMS ERROR '(&01)' WHILE OPENING NEW ACCOUNTING FILE '(&00)'. ACCOUNTING DEFAULTS ARE USED. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
The FILE macro is generated again with the accounting standard attributes.
For more detailed information about the DMS error code, enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
(&00): name of the accounting file
(&01): DMS error code.
NAM0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0004 ACCOUNTING NOT ACTIVE. COMMAND REJECTED
Meaning
The /CHANGE-ACCOUNTING-FILE, /MODIFY-ACCOUNTING-PARAMETERS and
/STOP-ACCOUNTING commands are only permitted if accounting is activated.
Response
If necessary, activate the accounting system by means of the
/START-ACCOUNTING command.
NAM0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0005 NO CONTINUATION FILE NAME AVAILABLE. COMMAND REJECTED
Meaning
The current accounting file name is fully qualified and no continuation
file has been specified, or the list of continuation files is exhausted.
No 'next' file name can be determined.
NAM0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0006 PREFIX '(&00)' LONGER THAN 26 CHARACTERS. COMMAND REJECTED
Meaning
No more than 26 characters (without the user ID) are allowed for
specifying
a partially qualified file name (prefix). Otherwise there is not enough
space for the suffix "yy.mm.dd.ss.nn", which is placed automatically.
Meaning of yy.mm.dd: date
sss : system session number
nn : current sequence number of the accounting file.
(&00): specified partially qualified file name (prefix).
NAM0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0007 ACCOUNTING ALREADY ACTIVE. COMMAND IGNORED
Meaning
The /START-ACCOUNTING command is only permitted and appropriate
if the accounting system is not active.
NAM0008
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0008 ERROR FROM ACCOUNTING LOGGING TASK. ERROR CODE: X'(&00)'
Meaning
An error occurred while processing an accounting command.
(&00) : CLTF error code.
If R1 = X'08' : I = R2 XX XX 08.
If R2 = X'14' : invalid number of files;
R2 = X'18' : invalid block size;
R2 = X'1C' : invalid OPEN mode.
If R1 = X'80' : I = YY YY ZZ 80.
YY YY = DMS error code;
ZZ = DMS exit byte;
For any other value and for more information about the CLTF error code,
contact the maintenance staff.
NAM0009
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0009 ACCOUNTING DEACTIVATED
Meaning
The command /STOP-ACCOUNTING has deactivated the accounting system.
NAM0010
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0010 ACCOUNTING FILE '(&00)' CLOSED
Meaning
The accounting file has been closed
- by means of the /STOP-ACCOUNTING command;
- by means of the /CHANGE-ACCOUNTING-FILE command;
- during the shutdown processing.
NAM0011
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0011 'FILE' MACRO ERROR '(&00)' WHILE PROCESSING A DMS ERROR ON ACCOUNTING FILE. SYSTEM DEFAULTS ARE USED. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
While processing a DMS error on the accounting file, a FILE macro was
issued for the new file. This macro returned an error code. The default
attributes of the DMS are used.
For more detailed information about this DMS error code, enter /HELP-MSG
in
system mode or see the BS2000 manual 'System Messages'.
(&00): DMS error code.
NAM0012
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0012 COMMAND '(&00)' RESTRICTED TO THE SYSTEM ADMINISTRATOR. COMMAND REJECTED
Meaning
Only the system administrator is allowed to enter an accounting command.
NAM0013
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0013 SYNTAX ERROR IN '(&00)' COMMAND. COMMAND PROCESSING ABORTED
NAM0014
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0014 MAXIMUM NUMBER OF USER-SPECIFIC ACCOUNTING RECORDS REACHED. COMMAND REJECTED
Meaning
The number of UACC or UDAT records is limited by the operand
MAX-ACCOUNT-RECORDS in the /MODIFY-USER command. This limit has
been reached for this task or program.
Response
For more information, contact the system administrator if necessary.
NAM0015
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0015 STARTUP CONTINUES WITHOUT ACCOUNTING
Meaning
No accounting is performed during startup due to the command
/STOP-ACCOUNTING in the parameter file.
Response
The accounting may be activated later by means of the
/START-ACCOUNTING command.
NAM0016
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0016 ACCOUNTING COMMAND ALREADY BEING PROCESSED. COMMAND REJECTED
Meaning
Only one accounting command can be processed at a time.
Response
Try the command again later.
NAM0017
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0017 NO CONTINUATION FILE AVAILABLE. ACCOUNTING DEACTIVATED
Meaning
A DMS error occurred on the current accounting file. As the file name is
not created automatically, and as no continuation file name is available,
accounting is deactivated.
NAM0018
Destination: CONSOLE Routing code: * (main console) Weight: 30
Warranty : NO
NAM0018 DMS ERROR WHEN OPENING NEW ACCOUNTING FILE. NO CONTINUATION FILE OPENED. ACCOUNTING STATUS REMAINS UNCHANGED
NAM0019
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0019 MORE THAN THREE CONSECUTIVE DMS ERRORS OCCURRED. ACCOUNTING DEACTIVATED. REPLY (ANY INPUT).
Meaning
Up to three consecutive DMS errors may occur while trying to switch to a
new accounting file. If a fourth error occurs, accounting is deactivated
to avoid recursion.
NAM0020
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0020 ILLEGAL COMBINATION OF 'SET', 'ADD' AND 'REMOVE' OPERANDS. COMMAND REJECTED
Meaning
If SET=*ALL is specified, the operand ADD is not permitted.
If SET=(list) is specified, neither ADD nor REMOVE may be specified.
NAM0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0021 DUPLICATE ELEMENTS IN LISTS FOR 'SET', 'ADD' OR 'REMOVE'. COMMAND REJECTED
Meaning
The same element may occur only once in a SET, ADD or REMOVE list.
NAM0022
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0022 ILLEGAL EXTENSION SPECIFICATION. COMMAND REJECTED
Meaning
An extension specification may not occur in a list in conjunction with a
record ID specification.
NAM0023
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0023 NO SPACE FOR RECORD IDENTIFICATION TABLE AVAILABLE. SYSTEM DEFAULT IS USED
Meaning
No space is available for the internal table for (de)activating the
accounting records. The system default is used.
Response
Try the command again later.
NAM0024
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0024 INTERNAL RECORD IDENTIFICATION TABLE IS FULL. NO MODIFICATION PERFORMED
Meaning
The limit for the total number of record IDs and/or extensions is reached
in the internal record identification table.
Response
If necessary, restructure the table by means of the SET operand.
NAM0025
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0025 UNRECOVERABLE I/O ERROR OCCURRED DURING OUTPUT TO SYSOUT
Meaning
An unrecoverable I/O error occurred while processing the WROUT macro.
NAM0026
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0026 'WROUT' MACRO PARAMETER ERROR
Meaning
The WROUT macro was called with an incorrect parameter list.
NAM0027
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0027 OUTPUT TRUNCATED
Meaning
The information to be output was too long for this output device.
NAM0028
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0028 USER ACCOUNTING RECORD HAS NOT BEEN WRITTEN
Meaning
The user-specific accounting record has not been written into the
accounting file. Possible causes:
- the accounting system is not active.
- the corresponding record is deactivated by the system administrator.
NAM0029
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0029 SYSTEM ERROR. RETURN CODE FROM 'AREC' MACRO: X'(&00)'
Meaning
A system error occurred while writing the user-specific accounting record
into the accounting file. For more detailed information on the return
code,
see the description of the AREC macro in the manual "Executive Macros".
NAM0030
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0030 MANDATORY ELEMENTS ADDITIONALLY ACTIVATED OR NOT DEACTIVATED
Meaning
As certain accounting records or extensions may not be deactivated, some
elements in a REMOVE list were ignored or some were added to SET or ADD
lists.
The list of mandatory IDs is printed in the BS2000 manual
'System Administrator's Guide'.
NAM0031
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0031 SPECIFIED ATTRIBUTES IGNORED FOR THIS ACCOUNTING FILE
Meaning
The BUFFER-LENGTH, SPACE and VOLUME attributes are ignored for existing
files. However, all specified attributes remain valid for subsequent
accounting files.
NAM0032
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0032 BOURSE CALLING ERROR X'(&00)'. COMMAND PROCESSING ABORTED
Meaning
A bourse calling error occurred while trying to communicate with the
accounting system task.
(&00): return code from the bourse call.
Response
For more information, contact the maintenance staff.
NAM0033
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0033 RESOURCE ERROR. ACCOUNTING (&00) COULD NOT BE CREATED. COMMAND PROCESSING ABORTED
Meaning
A necessary resource could not be created for the accounting system.
(&00): TASK, BOURSE or SLOT POOL.
Response
If this message appears along with command /START-ACCOUNT
(with /STOP-ACCOUNT before)
wait a moment and repeat the /START-ACCOUNT command.
NAM0034
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0034 ACCOUNTING LOGGING TASK CURRENTLY BEING TERMINATED ABNORMALLY. COMMAND NOT PROCESSED
Response
Reenter the command after the abnormal termination has been completed.
NAM0035
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0035 RESTART OF ACCOUNTING-LOGGING-TASK BEING PROCESSED. COMMAND NOT PROCESSED
Meaning
The accounting command could not be processed, because the accounting
system task is currently being restarted after a previous error.
Response
Reenter the command after the restart has been completed.
NAM0036
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0036 DMS ERROR ON ACCOUNTING FILE. DMS ERROR CODE: (&00). IN SYSTEM MODE: /HELP-MESS DMS(&00)
Meaning
While trying to open a new accounting file or to close the old one, a DMS
error occurred and was reported by the accounting system task. The
file name can be obtained from the additional console message.
For more detailed information about the DMS error code, enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
(&00): DMS error code.
NAM0037
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 50
Warranty : YES
NAM0037 ERROR DURING USER CATALOG UPDATE. USER CATALOG REMAINS UNCHANGED
Meaning
The accounting system was not able to rewrite an updated record into the
user catalog during the task termination.
NAM0038
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0038 TLM ERROR '(&00)' DURING ACCOUNTING LOCK CREATION. STARTUP CONTINUES WITHOUT ACCOUNTING
Meaning
An error occurred during an accounting lock creation with the result that
synchronization of either the accounting commands or of the accesses
to the internal record identification table is not possible.
(&00): Task Lock Manager error code.
Response
For more information, contact the maintenance staff.
NAM0039
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0039 TLM ERROR '(&01)' WHILE PROCESSING THE '(&00)' TLM-INTERFACE CALL ON ACCOUNTING COMMAND LOCK. COMMAND NOT PROCESSED
Meaning
An error occurred while processing a TLM operation on the accounting
command lock.
(&00): name of the TLM-interface:
$GTLOCK for a GET LOCK operation
$CKLOCK for a CHECK LOCK operation
(&01): Task Lock Manager error code.
Response
For more information, contact the maintenance staff.
NAM0040
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NAM0040 TASK LOCK MANAGER ERROR WHILE PROCESSING A TLM OPERATION ON THE ACCOUNTING INTERNAL RECORD IDENTIFICATION TABLE. SYSTEM DEFAULT USED
Meaning
A TLM error was detected in the synchronization processing of the
accounting internal record identification table.
The processing is continued with default values for record-ids during
startup.
NAM0041
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
NAM0041 CLTF ERROR '(&00)' ON ACCOUNTING CREATION. STARTUP CONTINUES WITHOUT ACCOUNTING
Meaning
Startup is continued without the accounting system.
(&00): CLTF error code.
Response
For more information, contact the maintenance staff.
NAM0042
Destination: USER-TASK, CONSOLE Routing code: * (main console) Weight: 99
Warranty : YES
NAM0042 $CREA ERROR '(&00)' ON ACCOUNTING PERIODIC TASK CREATION. ACCOUNTING GLOBAL PERIODIC FUNCTION NOT AVAILABLE
Meaning
An error occurred during accounting periodic task PACT creation with the
result that global periodic accounting is not possible.
Startup is continued without accounting global periodic function.
(&00): $CREA error code.
Response
For more information, contact the maintenance staff.
NAM0043
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0043 CLTF ERROR DURING ACCOUNTING STATUS INQUIRY. COMMAND REJECTED
Meaning
An error occurred during accounting status inquiry with the result that it
is not possible to know if the accounting system is on or off.
NAM0044
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0044 ERROR DURING ACCOUNTING GLOBAL PERIODIC TASK TERMINATION. TASK CANNOT BE TERMINATED
NAM0045
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0045 SPECIFIED BUFFER-LENGTH AND DISC TYPE NOT COMPATIBLE. SPECIFIED BUFFER-LENGTH MODIFIED FOR ACCOUNTING FILE
Meaning
The accounting file is put on a 4K disc. Therefore it is imperative that
the block size of the file is even.
NAM0046
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NAM0046 TLM ERROR '(&00)' WHILE PROCESSING THE $RLLOCK TLM-INTERFACE CALL ON THE ACCOUNTING COMMAND LOCK. PROCESSING CONTINUES
Meaning
An error occurred while processing the "RELEASE LOCK" TLM operation on the
accounting command lock.
The processing of the current command continues but the next accounting
command will probably not be processed due to an incorrect lock status.
(&00): Task Lock Manager error code.
Response
For more information, please contact the maintenance staff.
NAM0047
Destination: CONSOLE Routing code: * (main console) Weight: 80
Warranty : NO
NAM0047 AN ACCOUNTING RECORD IS LOST, DUE TO SLOTPOOL SATURATION
NAM0048
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM0048 PREFIX '(&00)' LONGER THAN 24 CHARACTERS. COMMAND REJECTED
Meaning
No more than 24 characters (without the user ID) are allowed for
specifying
a partially qualified file name (prefix). Otherwise there is not enough
space for the suffix "yy.mm.dd.ss.nn", which is placed automatically.
Meaning of yy.mm.dd: date
sss : system session number
nn : current sequence number of the accounting file.
(&00): specified partially qualified file name (prefix).
NAM1001
Destination: CONSOLE Routing code: * (main console) Weight: 50
Warranty : NO
NAM1001 ERROR DETECTED BY ACCOUNTING. ERROR CODE: '(&00)'
Meaning
An error occurred in accounting. A SERSLOG record has been written with
the specified error code as the SERSLOG ID.
NAM3001
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM3001 MAIN REQUEST PROCESSED BUT SOME FEATURES FUNCTION INCORRECTLY
Meaning
Main request has been processed although some features function
incorrectly.
For more information, see SYSOUT output messages.
NAM3003
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
NAM3003 SEMANTIC ERROR. COMMAND REJECTED
Meaning
For more information, see SYSOUT output messages.