Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0001 Subsystem MSCF does not exist in DSSM subsystem catalog. Command not processed
Response
If desired, enter the declaration of the subsystem MSCF in the subsystem
catalog and prepare the subsystem configuration.
MCA0002
Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0002 Subsystem MSCF not loaded. Command rejected
Response
At first create the MSCF subsystem by means of the command
/START-SUBSYSTEM SUBSYS=MSCF and then try the command again.
MCA0003
Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0003 Subsystem MSCF is being loaded. Try command later
Response
Wait until the message "MCS0011 SUBSYSTEM 'MSCF' LOADED ........" is
displayed on the console.
MCA0004
Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0004 Subsystem MSCF is being unloaded. Try command later
Response
Wait until the message "MCS0012 SUBSYSTEM 'MSCF' UNLOADED ........" is
displayed on the console.
Then try command /START-SUBSYSTEM SUBSYS=MSCF again.
MCA0005
Destination: USER-TASK Routing code: Weight: 50
Warranty : YES
MCA0005 COMMAND /MRSSTART OR /MRSEND NOT EXECUTED. ERROR CODE: '(&00)'
Meaning
(&00): Reason for rejecting the command:
01: The command has been entered already.
02: Specific files for subsystem MSCF are missing.
03: In DSSM catalog the subsystem MSCF is not present.
04: Processing of command /MRSEND is not completed.
05: Internal error in DSSM.
06: Subsystem MSCF is locked.
07: Subsystem MSCF is not loaded.
08: Internal error.
Response
(&00): 01, 07: No action necessary.
02 - 06, 08: Contact the system administrator.
MCA0006
Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0006 Caller is not privileged. Command not processed
Meaning
The use of the command is restricted to privileged users.
MCA0007
Destination: CONSOLE Routing code: R Weight: 50
Warranty : NO
MCA0007 Incorrect call of privilege routine
Response
Contact the system administrator.
MCA0008
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MCA0008 Command not entered by console. Command not processed
Meaning
From the command specific privileges the caller only has the operator
privilege. This only is allowed when the command is issued from a
console.
MCA0009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MCA0009 Internal error by making inquiries about the command environment. Command not processed
MCA0101
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0101 Master change started for shared pubset '(&00)' on host '(&01)', backup master SYSID is '(&02)'
Meaning
A master crash has ben detected for the specified shared pubset.
A master change has been initiated successfully.
(&00): Catalog identifier
(&01): Host name of the backup master
*OWN: the own host is the backup master
(&02): System identification.
MCA0102
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0102 Master change ended successfully for shared pubset '(&00)'. New master is host '(&01)', master SYSID is '(&02)'
Meaning
The master change for the indicated shared pubset has ended successfully.
The shared pubset is again fully accessible with the new master.
(&00): Catalog identifier
(&01): Host name of the new master
*OWN: the own host is the new master
(&02): system identification of the new master.
MCA0103
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0103 Master change aborted for shared pubset '(&00)' on host '(&01)'
Meaning
A master change for the specified shared pubset terminated abnormally.
The shared pubset is in state 'inaccessible,quiet'.
(&00): Catalog identifier
(&01): Host name of the backup master
*OWN: the own host is the backup master.
MCA0104
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0104 Master change not possible for shared pubset '(&00)' on host '(&01)', reason '(&02)'. Response: (EOT).
Meaning
It is not possible to make a master change, because at least one of the
following conditions, essential for a master change, is not met.
1. A backup master has to be designated by means of command
/SET-PUBSET-ATTRIBUTES,
2. The backup master has to access the shared pubset as a slave sharer,
3. CCS MSCF connections between the backup master and all slaves must
exist already.
(&00): Catalog identifier.
(&01): Host name of the backup master.
In case of '*OWN', the own host is the backup master.
In case of '*UNKNOWN' the backup master is unknown.
(&02): Reason for the abortion of the master change:
01: Master change was aborted due to an error.
02: Error during MRSCAT access.
03: Error during MONJV access.
04: Error during SVL access of the shared pubset PUBRES.
05: It is not possible to define the backup master from the SVL
fields BACKUP-MASTER, DESIGNATED-MASTER and ALTERNATE-BACKUP.
(refer to the command /SET-PUBSET-ATTRIBUTES).
06: At the backup master: No CCS MSCF connection to one or
more sharers of the shared pubset,
or an error occurred during execution of the MSCF information
function call.
07: Version problem. At least one sharer system has a BS2000
version not supporting this situation.
08: No CCS MSCF connection to the backup master.
09: Internal error.
10: Error at the start of the master change importing a pubset.
11: Export of pubset is running:
Response
Eventually check SVL fields BACKUP-MASTER, DESIGNATED-MASTER
and ALTERNATE-BACKUP by means of command /SHOW-PUBSET-ATTRIBUTES
and modify SVL fields if necessary, then try master change
again manually.
MCA0105
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0105 No MSCF connection to host '(&00)', SYSID '(&01)'. A master change for shared pubset '(&02)' will be rejected
Meaning
A master change is only possible if a CCS MSCF connection to the backup
master exists.
MCA0110
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
MCA0110 State of sharer host '(&00)', sysid '(&01)' at shared pubset '(&02)' changed. New state: '(&03)'
Meaning
The state of a sharer host on the given shared pubset changed.
This message refers to other slave sharers.
(&00): Host name of the sharer host.
(&01): System identification of the sharer host.
(&02): Catalog identifier.
(&03): New state of the sharer host:
SLAVE ACCESSIBLE: A new slave host is connected to the
shared pubset.
INACC., SLAVE CRASHED: A slave host has crashed, it cannot access
the shared pubset any more.
INACC., SLAVE EXCAT: A slave host is disconnected from the shared
pubset by the command /EXPORT-PUBSET, it cannot
access the shared pubset any more.
INACC., SHUTDOWN: The BS2000 or the MSCF Session of a partner host
is ended.
DISK WRITE ERROR: A slave host cannot write his alive messages
to the shared pubset because of a write error.
The slave is monitored no longer.
MCA0201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MCA0201 Pubset(s) not shared
Meaning
The related pubset is not a shared one or there does not exist any
shared pubset in MRSCAT or there is no shared pubset imported of
the requested type (*CCS/*XCS).
MCA0202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MCA0202 Pubset(s) not accessible
Meaning
The related pubset is in status inaccessible or there is no shared pubset
with status accessible.
MCA0203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MCA0203 Error at command processing, reason '(&00)'
Meaning
An error occurred during command processing.
(&00): Possible reasons:
NO WATCH DOG TASK: There is no watch dog task.
NO RECOVERY TASK: There is no watch dog recovery task.
BOURSE ERROR: A bourse error occurred during command processing.
WATCH DOG TASK ERROR: The watch dog task has an error.
WDOG INACCESSIBLE: The watch dog mechanism is not accessible.
PUBSET NOT CONNECTED: The pubset is unknown to the watch dog mechanism.
SYSTEM ERROR: An internal error occurred during command
processing.
MCA0204
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MCA0204 Output error
Meaning
During the processing of the /SHOW-SHARED-PUBSET command an error occurred
when trying to write onto SYSOUT.