Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARAR00 MARENADM.ARCHIVE VERSION '(&00)' STARTED
Meaning
The program MARENADM.ARCHIVE with version number (&00) has been started.
MARCP00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP00 MARENCP VERSION '(&00)' STARTED
Meaning
The program MARENCP with version number (&00) has been started.
MARCP01
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP01 MARENCP MAY ONLY BE LOADED UNDER USER ID $SYSMAREN
Meaning
An attempt was made to load MARENCP under an illegal user ID.
Response
Start MARENCP under the user ID $SYSMAREN.
MARCP02
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP02 MARENCP ALREADY LOADED
Meaning
The permanent batch task MARENCP has already been started or the file
$SYSMAREN.MAREN.LOCK.FILE (if IMON is installed the file with the
logical ID SYSDAT.LOCKFILE) could not be opened (e.g. ACCESS=READ).
Response
Check if MARENCP is already loaded. If not, try to erase the file
mentioned above and restart MARENCP.
MARCP04
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP04 OFFLINE LOGGING IN PROGRESS
Meaning
No volume catalog with the link name MARENCAT has been assigned in the
start procedure for the control program. MARENCP therefore writes logging
records only, and no attempts to access the MAREN catalog are made.
MARCP05
Destination: CONSOLE Routing code: T Weight: 70
Warranty : NO
MARCP05 MARENCP VERSION '(&00)' READY
Meaning
The initialization of the control program has been completed.
Effective immediately, requests for the MAREN subsystem are processed.
(&00): version of loaded MAREN control program.
MARCP06
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP06 FIRST RECORD IN MAREN CATALOG DOES NOT CONTAIN MAREN PARAMETERS. MARENCP TERMINATED WITH DUMP
Meaning
When the first record was read from the MAREN catalog, it was ascertained
that it did not contain the MAREN parameters, i.e. the MAREN catalog is
defective.
Response
The MAREN catalog must be regenerated.
MARCP07
Destination: CONSOLE Routing code: T Weight: 70
Warranty : NO
MARCP07 MAREN CATALOG FILE '(&00)' IS EMPTY
Meaning
When the MARENCP task was started, it was detected that the specified
MAREN catalog file was a dummy file. If this error occurs for the file
with the link name MARENCAT then MARENCP will be terminated.
(&00): file name.
Response
Check whether the file names which have been specified for the MAREN
catalog files in the start procedure for MARENCP are correct.
If they are not correct, terminate the MARENCP task, update the file
assignments in the ENTER file, and start the MARENCP task again.
MARCP08
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP08 INTERNAL ERROR IN MARENCP. MARENCP TERMINATED WITH DUMP
Response
Contact the MAREN administrator.
Start the MARENCP task again if possible.
MARCP09
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP09 DMS ERROR '(&00)' ON FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
While initializing the MARENCP task or accessing the MAREN catalog with
the aid of an AFR partner task, a DMS error occured.
For more detailed information about the DMS error code enter
/HELP-MSG in system mode.
Response
Eliminate the cause of the error, then start MARENCP again.
MARCP10
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP10 WARNING: MAREN TRANSACTION LOST FOR TSN '(&00)'
Meaning
In control program MARENCP, a MAREN transaction was terminated
successfully.
The requesting task, however, is no longer in the wait state since the
waiting time has expired (message MAR0084). The control program run
continues and the next transaction is processed.
(&00): TSN of the task in question.
Response
If this message occurs frequently, the waiting period defined for
termination of MAREN transactions should be extended.
MARCP11
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP11 Internal error in MARENCP is ignored: MARENCP continues
Meaning
MARENCP has tried to suppress a lock record which does not exist.
Response
Contact maintenance.
MARCP12
Destination: CONSOLE Routing code: T Weight: 30
Warranty : NO
MARCP12 MARENCP TERMINATED NORMALLY
MARCP13
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP13 MARENCP TERMINATED ABNORMALLY
Meaning
The MARENCP program run was terminated due to an error (look at the
previous message).
Response
Analyze and correct the error, then start MARENCP again.
MARCP14
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP14 ERROR '(&00)' WHEN CALLING THE MAREN SUBSYSTEM BY MARENCP OR MARENUCP. THE PROGRAM WILL BE TERMINATED ABNORMALLY
Meaning
(&00) Return information
Possible reasons:
- The versions of MARENCP or MARENUCP and the MAREN subsystem are
conflicting.
- Internal MAREN error when calling the MAREN subsystem by MARENCP
or MARENUCP.
Response
- Please check the versions of MARENCP, MARENUCP and the MAREN
subsystem.
- Inform the MAREN customer service.
MARCP16
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARCP16 PLEASE ENTER LOCAL MAREN PARAMETER OR 'END'. REPLY (<MAREN PARAMETER>; END=TERMINATE)
Meaning
MARENCP or MARENUCP requests the input of the local MAREN
parameters. The input list must at least contain all mandatory
parameters and has to be terminated by the statement END.
Any invalid input will cause the abnormal termination of
MARENCP or MARENUCP respectively.
MARCP17
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP17 OVERFLOW ON LOCATION TABLE; LAST ENTRY '(&00)' OVERWRITTEN
Meaning
When adding the name of the own host the control program detected that
there is no more space in the location table.
(&00): deleted entry in the location table.
Response
Check and update the location table entries.
MARCP18
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP18 OVERFLOW ON ARCHIVE PRERESERVATION TABLE
Meaning
During initialization the control program detected an overflow on
the ARCHIVE prereservation table. This overflow occurs if too many
directory-specific free tape pools exist.
Response
Reduce the number of directory-specific free tape pools.
MARCP19
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP19 JOB VARIABLE '(&00)' NOT ACCESSIBLE
Meaning
The MARENADM-Instruction //SHOW-MAREN-STATUS can only display correct
information about other hosts, if the Job Variable is accessible.
Error Reason:
MSCF-Connection does not exist.
MARCP20
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP20 RESERVATION COUNTER NON-NUMERIC
Meaning
The reservation counter of the specified volume is non-numeric.
This internal MAREN counter is incremented each time a new reservation
is made for a volume; it is used, among other things, for statistical
purposes.
Response
Contact the MAREN administrator. Access to the volume will not be
possible until the MAREN catalog entry has been corrected by the
MAREN administrator.
MARCP21
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP21 CHECK NUMBER NON-NUMERIC
Meaning
The check number in the MAREN catalog entry of the specified volume is
non-numeric.
This internal MAREN field is incremented each time if the VSN is updated.
Among other things, it is used for reorganization purposes.
Response
Contact the MAREN administrator. Access to the volume will not be
possible until the catalog entry has been corrected by the MAREN
administrator.
MARCP22
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP22 INVALID FUNCTION FLAG
Meaning
An invalid function flag was passed to the control program. This function
flag informs the control program about the actions to be taken.
Response
Contact the MAREN administrator.
MARCP23
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP23 INVALID ACCESS TO MAREN PARAMETER SET
Meaning
For read or write access to the MAREN parameter set only the MARENADM
statements //SHOW- and //MODIFY-MAREN-PARAMETERS are permitted.
Response
Contact the MAREN administrator.
MARCP24
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP24 REQUEST REJECTED BY MAREN ADMINISTRATOR
Meaning
The request from the user is rejected by a computer-center-specific
MAREN exit routine or MARENLM.
Response
Contact the MAREN administrator.
MARCP25
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP25 MAREN VERSION ON HOST '(&00)' TOO LOW FOR COOPERATION WITH MAREN V12.0A. THE MINIMUM VERSION IS '(&01)'.
Response
For consistent cooperation the minimum version must be used. If
some hosts are not existing, they should be removed with the
statement //REMOVE-HOSTS .
With the statement //SHOW-MAREN-STATUS the currently used
MAREN version can be displayed.
MARCP26
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP26 SECONDARY INDEX RECORD ALREADY AT MAXIMUM SIZE FOR FILE NAME '(&00)'
Meaning
A new index entry for a file could not be accepted, because the file's
secondary index record in the MAREN catalog is already full. This leads
to incomplete output in the case of file-name-specific queries of
catalog entries (//SHOW-VOLUME-ATTRIBUTES FILENAME=<full-filename>).
Response
Check index entries pertaining to the specified file name. Perhaps delete
any superfluous entries, so that the corresponding file name secondary
index record can accommodate all entries the next time the index files
are regenerated.
MARCP27
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP27 ADMINISTRATOR'S EXIT ROUTINE FOR MAREN IS INVALID; ERROR IN FIELD '(&00)'. MARENCP TERMINATED WITH DUMP
Meaning
When checking the MAREN catalog entry returned by the exit routine
of the MAREN administrator, an illegal value was detected in the
field specified.
(&00): name of the field (see DSECT of the MAREN catalog entry).
Response
Analyze and correct the error (see also the dump), then start MARENCP
again.
MARCP28
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP28 VOLUME NOT IN MAREN CATALOG
Meaning
There is no MAREN catalog entry for the specified volume.
The desired statement could not be executed.
Response
Check the VSN and repeat the statement after making any necessary
corrections.
MARCP30
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP30 NO MAREN LOGGING FILE CURRENTLY OPEN
Meaning
At present no logging records are being written by the control program.
Either the local MAREN parameter LOGGING has not been set or the
MAREN administrator has closed the current MAREN logging file by means of
the //CLOSE-MAREN-FILES statement.
Response
Before using //CHANGE-LOGGING-FILE open the current logging file by means
of the MARENADM statement //OPEN-MAREN-FILES or set the local MAREN
parameter LOGGING in the start procedure for MARENCP.
MARCP31
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP31 MAREN LOGGING FILE STILL OPENED BY OTHER TASKS. RETRY STATEMENT LATER
Meaning
A new logging file cannot be assigned, because the current one is still
opened by other tasks besides the MAREN control program of the own host.
Response
Terminate all programs which have opened the current logging file
(except MARENCP), then enter the statement again.
MARCP32
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP32 MAREN LOGGING FILE '(&00)' OPENED FOR HOST '(&01)'
Meaning
The file '(&00)' has been opened as the new logging file for the
MAREN system on host '(&01)'.
MARCP33
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARCP33 FILE '(&00)' FOR HOST '(&01)' HAS INVALID FORMAT
Meaning
The specified file has some file attributes which are illegal for a
MAREN logging file.
Possible reasons:
- ACCESS-METHOD not ISAM
- KEY-LENGTH not 32
- KEY-POSITION not 5.
(&00): name of the specified MAREN logging file.
(&01): host name.
Response
Repeat the statement using a different file name.
MARCP34
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP34 INVALID INPUT OF LOCAL MAREN PARAMETERS: '(&00)'. MARENCP OR MARENUCP TERMINATED ABNORMALLY.
Meaning
In the start procedure for MARENCP or MARENUCP the local MAREN parameters
were not specified correctly.
Possible reasons:
- a mandatory parameter is missing
- a parameter is unknown or invalid
- the statement END is missing.
(&00): specifies the name of the rejected parameter.
Response
Correct the input of local MAREN parameters, then start MARENCP or
MARENUCP again.
MARCP35
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP35 PARAMETERS IN MARENCP-ENTER-FILE IGNORED
Response
Since MAREN Version 10.0A the parameters in the MARENCP enter file
will be ignored.
MARCP36
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP36 THIS HOST CANNOT BE CONNECTED TO THE MAREN NETWORK
Meaning
The global Parameter DOMAIN-PROTECTION is set to *ACTIVE, but the
host on which this message occurs is unknown within the MAREN
catalog.
Response
Please enter the MARENADM statement //ADD-HOST for the current host.
MARCP40
Destination: CONSOLE Routing code: T Weight: 99
Warranty : YES
MARCP40 HOST '(&00)' HOLDS ALREADY A LOCK IN THE MAREN CATALOG, PLEASE CHECK IT
Meaning
The host tries to get a lock in the MAREN catalogue. A lock remains,
probably from a previous session.
(&00): host name which gets the MAREN lock
Response
Please enter the MARENADM statement //VERIFY-MAREN-CATALOG
MARCP46
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP46 Userid has no privilege for tape administration.
Meaning
For MARENCP, the system privilege for the tape administration
is mandatory.
Response
Contact the system administrator.
MARCP48
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP48 AN UNIQUE CATALOG ADAPTION TAKES PLACE, THIS MAY LAST SOME TIME
MARCP50
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP50 RETURN CODE '(&00)' DURING PROCESSING OF MACRO '(&01)'
MARCP52
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP52 UNDEFINED ARCHIVE-STATUS IN CATALOG ENNTRY '(&00)'
MARCP53
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP53 INVALID DIRECTORY-NAME CATALOG ENTRY '(&00)'
MARCP54
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP54 NOW LIMITED MAREN OPERATING POSSIBLE
Meaning
If MAREN V9.0 and MAREN V10.0 use the same catalogue. MAREN V9.0 can
now run normally; for MAREN V10.0 one must wait until a single
catalogue adaption is completed. This can take some time.
MARCP56
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP56 ADAPTION OF MAREN CATALOG COMPLETED
MARCP60
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP60 RETURN CODE '(&00)' DURING PROCESSING OF MACRO '(&01)' FOR ALTERNATE INDEX '(&02)'
MARCP62
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP62 ADAPTION OF MAREN CATALOG UNSUCCESSFULLY COMPLETED
Meaning
Adaption of MAREN Catalog to MAREN V10.0 incomplete
Possible Reason:
The MAREN-catalog cannot be exclusively accessed, since e. g.
MARENADM or MARENCP is loaded (even on another host).
Response
Restart MARENCP, but make shure that MARENCP is not startet by other
computers until message MARCP56 arrives. This is only neccessary for
MARENCP first start in MAREN V10.0.
MARCP63
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP63 INCOMPLETE ADAPTION OF MAREN CATALOG
Meaning
Repeat catalog adaption by VERIFY-MAREN-CATALOG
MARCP64
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP64 THE MAREN CATALOG FILE IS NOT IN THE CORRECT FORMAT
Meaning
Attempt to start the control program MARENCP with MAREN catalog file
that is in the incorrect format.
Possible reasons:
- The catalog file is not in NK format
- The catalog file has no secondary indices.
Response
Use a correct MAREN catalog file.
MARCP66
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP66 A MAREN CATALOG ADAPTION WAS ALREADY STARTED - CATALOG ADAPTION RESTARTED
MARCP68
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARCP68 THE NEW LOGGING FILE CAN NOT BE CREATED
MARCP69
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARCP69 REQUEST FOR FREE TAPE FROM MARENCP OR MARENUCP WILL BE REJECTED
MARC100
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
MARC100 NO TASK FILE TABLE EXISTS FOR MAREN OR NO ENTRY IN MAREN TFT FOR SPECIFIED FILE NAME
Meaning
Possible reasons:
- no task file table for MAREN (MAREN TFT) was created
- all entries in the MAREN TFT have been released
- no entry with the specified file name exists in MAREN TFT.
MARC110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARC110 Remote LOCATION : '(&00)'. Command rejected
Meaning
When a LOCATION is specified in the /ADD-MAREN-FILE-ENTRY command,
the specified location may not be remote, but locally defined.
(&00): location name given in the command
Response
None.
MARC111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARC111 Invalid LOCATION: '(&00)'. Command rejected
Meaning
When a LOCATION is specified in the /ADD-MAREN-FILE-ENTRY command,
the specified location must correspond to a location defined
in the MARENCP local parameters.
(&00): location name given in the command.
Response
None.
MARC120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARC120 Warning. LOCATION cannot be validated.
Meaning
The specified location cannot be validated.
the file entry is generated without check on the location.
Response
None.
MARC201
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
MARC201 ERROR DURING FILE NAME COMPLETION. COMMAND NOT EXECUTED
Meaning
Possible reasons:
- the specified user ID has no entry in the home PVS.
- adding the catalog ID and user ID to the file name has caused the
maximum permissible length for a path name to be exceeded.
- invalid TSN specified.
- an error occurred in the connection with ACS (Alias Catalog Service).
Response
Check the specified file name. Contact the system administrator if
necessary.
MARFA01
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA01 MAREN ERROR '(&00)' WHEN ACCESSING VOLUME '(&01)'. IN SYSTEM MODE: /HELP-MSG (&00)
Meaning
(&00): MAREN error code
(&01): volume serial number (VSN).
Response
For more detailed information about the MAREN error code
enter /HELP-MSG in system mode.
MARFA11
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA11 VOLUME '(&00)' NOT PRERESERVED FOR ARCHIVE
Meaning
The specified volume does not exist in any free tape pool created
by the MAREN administrator.
Therefore it cannot be used for an ARCHIVE save run.
(&00): volume serial number (VSN).
Response
Check the VSN and make any necessary corrections.
MARFA12
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA12 VOLUME '(&00)' IS IN A WRONG FREE-POOL
Meaning
The specified volume runs with a different ARCHIVE-directory which
is conflicting to the FREE-POOL name.
(&00): volume serial number (VSN).
Response
Check the VSN and make any necessary corrections.
MARFA13
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA13 VOLUME '(&00)' ALREADY IN POOL OF DIRECTORY '(&01)'
Meaning
The specified volume is already contained in the pool of a directory file.
It can be used neither for ARCHIVE runs without a directory nor in runs
with another directory.
(&00): volume serial number (VSN)
(&01): name of an ARCHIVE directory.
Response
Check the VSN and make any necessary corrections.
MARFA14
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA14 VOLUME '(&00)' RESERVED BY FOREIGN USER
Meaning
The specified volume is assigned to a foreign user in the MAREN catalog.
Therefore it cannot be used under the own user ID for any ARCHIVE
run with a directory.
(&00): volume serial number (VSN).
Response
Use a volume of the own user ID.
MARFA15
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA15 VOLUME '(&00)' HAS INVALID DEVICE TYPE
Meaning
The device type of the volume in the MAREN catalog is not compatible
with the device type in the ARCHIVE statement.
(&00): volume serial number (VSN).
Response
Use a volume with a valid device type.
MARFA16
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA16 VOLUME '(&00)' SECURED FOR MARENUCP
Meaning
The specified volume is already secured for automatic free tape
allocation with MARENUCP. Therefore it cannot be used by the specified
ARCHIVE statement.
(&00): volume serial number (VSN).
Response
Use a different volume.
MARFA17
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA17 VOLUME '(&00)' PROTECTED BY PASSWORD. MAREN CATALOG ENTRY NOT MODIFIED
Meaning
In the MAREN catalog entry the specified volume is protected by a
password.
Either this volume password has been omitted or the entry contains an
error.
(&00): volume serial number (VSN).
Response
Enter the volume password, then repeat the action.
MARFA18
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA18 INTERNAL ERROR IN MAREN SUBSYSTEM
Meaning
The following message MARKZ81 contains further diagnostic information.
Response
Contact the MAREN administrator.
MARFA19
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA19 VOLUME '(&00)' NOT ASSIGNED TO POOL OF SPECIFIED DIRECTORY FILE
Meaning
In the MAREN catalog the volume (&00) is not assigned to the pool of the
specified directory file of ARCHIVE.
The MAREN catalog entry will not be modified.
(&00): volume serial number (VSN).
MARFA20
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARFA20 VOLUME '(&00)' ALREADY ASSIGNED TO POOL OF SPECIFIED DIRECTORY FILE
Meaning
In the MAREN catalog the volume (&00) is already assigned to the pool of
the specified directory file of ARCHIVE.
The MAREN catalog entry will not be modified.
(&00): volume serial number (VSN).
MARFA21
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARFA21 The volume (&00) is not in location (&01)
Meaning
The proposed volume is not in the location desired by the user.
Response
Specify a location where there is at least one volume corresponding to
the desired characteristics.
MARFA30
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARFA30 AT THE MAREN-ARCHIVE-INTERFACE THE FOLLOWING ERROR OCCURED, RETURN-CODE: '(&00)'
Meaning
&00 = xxxxxxnn nn represents the return code
X'11' - Wrong password
X'12' - Volume belongs to foreign owner
X'13' - Retention period not exceeded
X'21' - Volume not in MAREN catalog
X'23' - Volume in use by another task at the same host
X'24' - Volume locked from different host
X'25' - Wrong device type
X'26' - Invalid volume status
X'27' - Incorrect Home Location
X'28' - Usage restricted to MARENUCP
X'29' - Request rejected by MAREN Administrator
X'2A' - Volume not prereserved for ARCHIVE
X'2B' - Different ARCHIVE prereservation
X'2C' - Already in other Directory Pool
X'2E' - Pool for specified Directory is empty
X'2F' - Pool for global ARCHIVE is empty
X'30' - Pool for ARCHIVE via TSOS is empty
X'31' - Pool for free volumes is empty
X'32' - Device type invalid for reservation
X'33' - Free-Pool-Name does not exist
X'41' - MARENUCP shortterm inactive
X'42' - MARENUCP permanently inactive
X'43' - MAREN catalog temporarily locked
X'44' - MARENCP not active
X'45' - DMS error on MAREN catalog file
X'47' - Catalog entry changed meanwhile
X'48' - Request rejected by operator
X'49' - Volume exported
X'4A' - Volume not at specified location
X'4B' - Invalid input location
X'4C' - Expiration date lower than current
X'4D' - Get did for INIT
X'4E' - NKA call error
X'50' - Output area address incorrect
X'51' - Partially successful, area too short
X'52' - SUBSAVE/SEQ duplicate
X'53' - Gaps in SUBSAVE/SEQ
X'54' - Directory/File more than one for SFID
MARKZ81
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARKZ81 VSN='(&00)', FSEQ='(&01)', RETURN INFORMATION '(&02)'
Meaning
This message contains further diagnostic information on the preceding
error message.
(&00): VSN of the volume on which the error occurred
(&01): associated file sequence number (FSEQ)
(&02): internal MAREN return information.
Response
Contact the MAREN administrator.
MARKZ82
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARKZ82 RETURN INFORMATON '(&00)' OCCURRED
MARKZ83
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARKZ83 INTERNAL ERROR: INVALID OR MISSING SECONDARY INDEX
MARKZ84
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARKZ84 INTERNAL ERROR: 'MARAIX NEXT' WITHOUT PRECEDING 'MARAIX FIRST'
MARLM00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARLM00 MARENLM VERSION '(&00)' STARTED
Meaning
The program MARENLM with version number (&00) has been started.
MARLM01
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM01 DMS error '(&00)' when opening the reservation file '(&01)'. In system mode: /HELP-MSG DMS(&00)
Meaning
A DMS error occurred while opening the reservation file (referred to
by the LINK-NAME MARENLMF).
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode.
&00 DVS error code
&01 name of reservation file
Response
Eliminate the cause of the error and issue the request again.
MARLM02
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM02 Reservation file '(&01)' locked or protected. In system mode: /HELP-MSG DMS(&00)
Meaning
The reservation file (&01) is locked or the access is restricted.
A DMS error occurred while opening the reservation file (referred to
by the LINK-NAME MARENLMF).
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode.
&00 DVS error code
&01 name of reservation file
Response
Check the access to the reservation file and issue the request again.
MARLM03
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM03 Reservation '(&00)' file corrupted or version not supported
Meaning
The reservation file (&00) is corrupted or its version is not yet
supported by the MAREN exits installed on the system.
&00 name of reservation file
Response
Check the reservation file and the version of the MAREN exits.
MARLM04
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM04 DMS error '(&00)' when reading the reservation file '(&01)' . In system mode: /HELP-MSG DMS(&00)
Meaning
A DMS error occurred while reading the reservation file.
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode.
&00 DVS error code
&01 name of reservation file
Response
Eliminate the cause of the error and issue the request again.
MARLM05
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM05 DMS error '(&00)' when closing the reservation file '(&01)' . In system mode: /HELP-MSG DMS(&00)
Meaning
A DMS error occurred while closing the reservation file.
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode.
&00 DVS error code
&01 name of reservation file
Response
Eliminate the cause of the error and check the request.
MARLM06
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARLM06 DMS error '(&00)' on the reservation file '(&01)' . In system mode: /HELP-MSG DMS(&00)
Meaning
A DMS error occurred while accessing the reservation file (referred to
by the LINK-NAME MARENLMF).
For more detailed information about the DMS error code, enter /HELP-MSG
in system mode.
&00 DVS error code
&01 name of reservation file
Response
Eliminate the cause of the error and issue the request again.
MARLM10
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARLM10 FHS Dialog Manager error '(&00)'.
Meaning
A FHS Dialog Manager error occured during the processing of
the MAREN Location Manager.
For more detailed information about the FHS error code,
see the FHS-DM manual.
Response
Eliminate the cause of the error and contact the MAREN administrator
if necessary.
MARLM11
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARLM11 Error on accessing file '(&00)'
Meaning
An error occured while accessing the MARENLM format library or the file
does not exist.
Response
Eliminate the cause of the error and issue the request again.
MARLM12
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARLM12 Wrong definition in field '(&00)' with value '(&01)' in reservation file '(&02)'. Record-count: '(&03)'
Meaning
The field includes wrong combinations of characters from reservation file
or the field A/F is empty but ARCHIVE-Directory/Filename has any value.
The analyse of reservation file continues with the next record.
&00 name of the field from MARENLM-display
&01 value of the field
&02 name of the reservation file (LINK-NAME = MARENLMF which is set
in the start-procedures from MARENCP and/or MARENUCP)
&03 record counter
Response
Correct the value of the field or if the field A/F is empty, then
- delete the field ARCHIVE-Directory/Filename.
- set the field A/F with A (archive) or F (filename).
MARM000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM000 MAREN VERSION '(&00)' STARTED
Meaning
The program MAREN with version number (&00) has been started.
MARM014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM014 VOLUME '(&00)' PROTECTED BY PASSWORD. STATEMENT REJECTED
Meaning
The specified volume is protected by a volume password which has not
been entered.
(&00): volume serial number (VSN).
Response
Enter the correct password for the volume.
MARM015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM015 VOLUME '(&00)' NOT AVAILABLE FOR THIS STATEMENT
Meaning
The specified volume is not available for the statement to be executed.
Possible reasons:
- the volume is assigned to a foreign user ID and is not shareable
- it is a free volume
- the cartridge is located in a virtual roboter archive
- the MAREN catalog contains a migrated volume with the same VSN
- the MAREN catalog entry contains attributes which make the requested
modification impossible (see previous message MARM179).
- A Save-File-Id. was specified which was not found in the MAREN
catalog entry for the specified volume.
(&00): volume serial number (VSN).
Response
Check the VSN. Contact the MAREN administrator if necessary.
MARM016
Destination: USER-TASK, CONSOLE Routing code: T Weight: 70
Warranty : NO
MARM016 MAREN INFORMATION: MOUNT TAPE '(&00)' WITH WRITE PROTECTION
Meaning
Request to mount a tape with a write protection with the aid of MAREN.
(&00): volume serial number (VSN).
Response
Mount the requested tape with a write protection on an available device.
MARM017
Destination: USER-TASK, CONSOLE Routing code: T Weight: 70
Warranty : NO
MARM017 MAREN INFORMATION: MOUNT TAPE '(&00)' WITHOUT WRITE PROTECTION
Meaning
Request to mount a tape without a write protection with the aid of MAREN.
(&00): volume serial number (VSN).
Response
Mount the requested tape without a write protection on an available
device.
MARM018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM018 VOLUME '(&00)' UNLOCKED
Meaning
The internal lock was reset for the specified volume.
(&00): volume serial number (VSN).
MARM019
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM019 A MIGRATED TAPE WITH VSN '(&00)' IS FOUND. SO '//EXPORT-VOLUME' FOR THIS TAPE IS RESTRICTED TO MARENADM
Meaning
When attempting to export a private tape a migrated tape with the
same VSN '(&00)' is found. In order to avoid inconsistent data
within the MAREN catalog, in this case it would be neccessary to
perform additional internal function calls which are privileged
and restricted to MARENADM (e. g. writing accesses to a MAREN
catalog entry for a tape which may belong to a foreign user).
So the statement cannot be processed in this way and will be
aborted.
Response
Please contact the MAREN administator.
MARM020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM020 WARNING: THE MODIFICATION OF '(&00)' IN MAREN CATALOG ENTRY WITH FILE SEQUENCE NUMBER '(&01)' HAS NO EFFECT ON THE VOLUME ATTRIBUTES OF VSN '(&02)'
Meaning
The specified file is part of a MF/MV set and is not the first
file on the volume. The specified attribute has only an effect for
the further processing of the volume if it is set in the MAREN
catalog entry with file sequence number 1.
Job switch 30 will be set.
(&00): volume attribute
(&01): file sequence number (FSEQ)
(&02): volume serial number (VSN).
Response
If necessary, set the corresponding volume attribute also in the
MAREN catalog entry with file sequence number 1 by means of the
statement //MODIFY-VOLUME-ATTRIBUTES.
MARM021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM021 WARNING: MODIFICATION OF ATTRIBUTES FOR VOLUME '(&00)' IN CORRESPONDING MAREN CATALOG ENTRY WITH FILE SEQUENCE NUMBER 1 NOT POSSIBLE
Meaning
Possible reasons:
- MAREN catalog entry with file sequence nummer 1 not existing
- No access possible to file sequence number 1 (e.g. not sharable)
- File expiration date of another MAREN catalog entry for this volume
greater than the specified volume free date.
Job switch 30 will be set.
(&00): volume serial number (VSN).
MARM022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM022 EXPIRATION DATE MODIFICATION IS NOT POSSIBLE FOR THE MAREN CATALOG ENTRY '(&00)':001; THE CORRESPONDING VOLUME IS ASSIGNED TO AN ARCHIVE DIRECTORY
Meaning
The modification of the expiration-date of a volume assigned to
an ARCHIVE directory is no longer allowed except for the tape
administrator
'(&00)': Volume serial number (VSN).
Response
A change of the EXPIRATION-DATE can be done by means of ARCHIVE.
MARM030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM030 The foreign-device-type '(&00)' is announced to MAREN with the volume-type x'(&01)'.
Meaning
&00 - name for device-type
&01 - internal administration-code for DEVICE-TYPE
(2 byte-field DEVICE in macro MARENA)
MARM031
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM031 The foreign-device-type '(&00)' is removed.
Meaning
The deleted device-type is no longer used for displays.
&00 - name for device-type
MARM032
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM032 The foreign-device-type '(&00)' is renamed to '(&01)'. Volume-type x'(&02)'.
Meaning
&00 - name for the old device-type
&01 - new name for device-type
&02 - this volume-type is modified
MARM033
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM033 No foreign-device-types are registered in MAREN.
MARM035
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM035 The statement '(&00)' is not successfully completed, because the device-type '(&01)' already exists.
Meaning
&00 - name of the statement
&01 - name of the DEVICE-TYPE
MARM036
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM036 The statement '(&00)' is not successfully completed, because the device-type '(&01)' does not exist.
Meaning
&00 - name of the statement
&01 - name of the DEVICE-TYPE
MARM037
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM037 The statement '(&00)' is not successfully completed, because the foreign-device-type-table is full.
Meaning
&00 - name of the statement
The limit of FOREIGN-DEVICE-TYPEs is reached.
Response
Check, if some FOREIGN-DEVICE-TYPEs are unused. In this case,
delete them and add the new FOREIGN-DEVICE-TYPE.
MARM070
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM070 STATEMENT '//EXPORT-VOLUME' NOT PERMITTED
Meaning
The MAREN administrator has not authorized users to enter the
//EXPORT-VOLUME statement.
MARM071
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM071 EXPORT OF FOREIGN VOLUMES NOT PERMITTED
Meaning
The MAREN administrator has not authorized users to export
volumes assigned to a foreign user ID.
Response
Request the MAREN administrator to perform the procedure for exporting
volumes.
MARM072
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM072 CENTRAL ARCHIVE CURRENTLY CLOSED. STATEMENT REJECTED
Meaning
The statement can only be executed while the central archive is open.
Response
Note the times the central archive is open.
MARM081
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM081 SPECIFIED FILE '(&00)' DOES NOT EXIST
Meaning
(&00): file name.
MARM082
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM082 DMS ERROR '(&00)' ON FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
While accessing the specified file a DMS error occurred.
For more detailed information about the DMS error code enter
/HELP-MSG in system mode.
(&00): DMS error code
(&01): file name.
MARM083
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM083 MAREN TERMINATED ABNORMALLY
Meaning
For more detailed information about the program termination see the
previous messages. Task switch 31 is set.
Response
Eliminate the cause of the error and then start MAREN again.
MARM084
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM084 LMS ERROR '(&00)' ON ELEMENT '(&02)' OF FILE '(&01)'
Meaning
An error occurred during the access to an LMS file.
(&00): LMS error code
(&01): file name
(&02): element.
MARM085
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM085 PARAMETER SET '(&00)' DOES NOT EXIST IN PARAMETER FILE '(&01)'
MARM086
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM086 DURING MAREN PROCESSING OF FILE '(&00)' DMS ERROR '0AA7' OCCURED. /REPAIR-DISK-FILES NEEDED
Meaning
No further information.
MARM087
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM087 PARAMETER-SET CONTAINS SOME PARAMETERS WHICH ARE UNKNOWN IN THE CURRENT VERSION
Meaning
Please use a MAREN-Parameter-Set which was produced in the
current MAREN Version or in an earlier MAREN Version.
MARM088
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM088 '(&00)' : '(&01)' DOES NOT EXIST
Meaning
&00 - 'HOST' or 'DOMAIN'
&01 - Concerned host or domain.
If '&00' is 'HOST', it is also possible that the host in '&01' does
exist, but is not visible to the domain administrator, because it
belongs to a foreign domain.
If '&00' is 'DOMAIN', it is also possible that the domain does
exist, but is foreign (and therefore not visible to the domain
administrator) or does not contain any hosts.
MARM089
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM089 STATEMENT NOT PERFORMED BECAUSE THE FUNCTION 'DOMAINS-CONCEPT' IS INACTIVE
Meaning
No further information.
MARM090
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM090 '(&00)' : '(&01)' ALREADY EXIST
Meaning
No further information.
MARM091
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM091 MARENADM is working in '(&00)'
Meaning
&00 - DOMAIN-MODE
&00 - ALL-DOMAIN-MODE
- MARENADM selects the domain-mode depending on:
- Domain-Concept is activated.
- Offline-logging is in process
- MARENCP not loaded
Response
&00 - DOMAIN-MODE/ALL-DOMAIN-MODE
For changing the domain-mode use the statement
MODIFY-ADMINISTRATION-SCOPE .
- If offline-logging is active or MARENCP is not loaded or
the host has no authorization for all-domain-mode, then
the domain-mode cannot be changed.
MARM092
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM092 For domain '(&00)' the parameter '(&01)' is effective
Meaning
No further information.
MARM093
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM093 MEMORY SHORTAGE IN PROGRAM MAREN OR MARENADM. THE STATEMENT COULD NOT BE PROCESSED
Meaning
No further infomation.
Response
- Please take dump.
- Please terminate and reload the program MAREN or MARENADM.
- Afterwards you can repeat the statement.
MARM094
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM094 THE SPECIFIED DOMAIN DOES NOT CONTAIN ANY HOSTS
MARM095
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM095 PARAMETER 'ALL-FROM-DOMAIN' NOT ALLOWED BECAUSE THE DOMAIN CONCEPT IS NOT ACTIVATED
MARM098
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM098 MAREN TERMINATED NORMALLY
MARM1A1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1A1 MAREN SUBSYSTEM NOT AVAILABLE
Meaning
The MAREN subsystem is either not loaded or not activated.
Response
Contact the MAREN administrator.
MARM1A2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1A2 INVALID TRANSFER PARAMETER. PROGRAM TERMINATED WITH DUMP
Meaning
During program execution an invalid transfer parameter was detected.
Response
Analyze the dump and send the results to the MAREN administrator,
if necessary.
MARM1A3
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM1A3 MAREN SUBSYSTEM NOT AVAILABLE ON HOST '(&00)'
Meaning
No further information.
MARM1A4
Destination: CONSOLE Routing code: T Weight: 70
Warranty : NO
MARM1A4 MESSAGE '(&00)' SENT BY HOST '(&01)', USER-ID '(&02)', JOBNAME '(&03)' AND TSN '(&04)'
MARM1B1
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM1B1 CONTINUE OUTPUT OF BULLETIN? REPLY (Y=YES; N=NO)
Meaning
The user has to decide whether or not the output of the MAREN bulletin
is to be continued with additional general information.
Response
Y: continue the output
N: terminate the output.
MARM1B2
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM1B2 CONTINUE OUTPUT OF BULLETIN FOR USER ID '(&00)'? REPLY (Y=YES; N=NO)
Meaning
The user has to decide whether or not the output of the MAREN bulletin
is to be continued with additional information for user ID (&00).
Response
Y: continue the output
N: terminate the output.
MARM1C0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C0 SPECIFIED STATEMENT RESTRICTED TO SYSTEM ADMINISTRATOR
Meaning
The specified statement is calling privileged functions
which can only be executed under the user ID of the
system administrator. Therefore this statement will be rejected
under any non-privileged user ID.
Response
Repeat the statement under the ID of the system administrator.
MARM1C1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C1 NO ENTRIES FOR FILE GENERATIONS EXIST IN TSOSCAT
Meaning
The processing of the statement is terminated.
MARM1C2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C2 NO ENTRIES FOR TAPE FILES EXIST IN TSOSCAT
Meaning
The processing of the statement is terminated.
MARM1C3
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM1C3 RESET 'FREE-DATE'? REPLY (Y=YES; N=NO; E=TERMINATE EXECUTION)
Meaning
The current MAREN catalog entry contains the name of a file
generation which no longer exists in TSOSCAT.
In order to match the entries in TSOSCAT and in the MAREN catalog
the FREE-DATE of the volume has to be reset.
The entry for the file generation concerned will be removed from the
MAREN catalog by the next release procedure of the MAREN administrator.
Response
Y: FREE-DATE is to be reset
N: FREE-DATE is to remain unchanged
E: execution of the statement is to be aborted.
MARM1C4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C4 'FREE-DATE' HAS BEEN RESET FOR VOLUME '(&00)'
Meaning
The volume will be released during the next release procedure of the
MAREN administrator and the entry for the associated file generation
will be removed from the MAREN catalog.
(&00): volume serial number (VSN).
MARM1C5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C5 MAREN ERROR '(&00)' WHILE RESETTING 'FREE-DATE' FOR VOLUME '(&01)'. IN SYSTEM MODE: /HELP-MSG '(&00)'
Meaning
Maybe the MAREN catalog entry is protected by a password.
The entry for the file generation concerned will not be removed from the
MAREN catalog.
(&00): MAREN message code
(&01): volume serial number (VSN).
Response
Request more information about the cause of the error by means of the
/HELP-MSG command.
Repeat the statement after making the necessary corrections.
MARM1C6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C6 NO OBSOLETE FGG ENTRIES EXIST IN MAREN CATALOG. STATEMENT NOT PROCESSED
Meaning
There are no obsolete entries for file generation groups (FGG) in the
MAREN catalog.
MARM1C7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C7 IN MAREN CATALOG NOT ALL VOLUMES ADDED FOR FILE '(&00)'
Meaning
Not all volumes from the TSOSCAT entry of the specified file
have been added to the MAREN catalog.
Possible reasons:
- at least one VSN was outside the specified number range
- at least one volume already existed in the MAREN catalog.
(&00): file name.
MARM1C8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C8 VOLUME '(&00)' FOR FILE '(&01)' ALREADY PROCESSED
Meaning
The volume (&00) contained in the TSOSCAT entry of the file (&01) has
already been found in the TSOSCAT entry of another file and was added to
the MAREN catalog or was already present in the MAREN catalog.
The volume cannot be added twice.
(&00): volume serial number (VSN)
(&01): file name.
MARM1C9
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1C9 NO DIFFERENT ENTRIES FOUND IN TSOSCAT AND MAREN CATALOG
MARM1DA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1DA (&00) VOLUMES FOR DIRECTORY '(&01)'
Meaning
In the MAREN catalog (&00) volumes are assigned to the directory
name (&01).
(&00): number of volumes
(&01): file name of an ARCHIVE directory.
MARM1D1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D1 VOLUMES FOR USER ID '(&00)' :
Meaning
In the MAREN catalog the following volumes are assigned to the specified
user ID.
MARM1D2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D2 VOLUMES FOR FILE '(&00)' :
Meaning
In the MAREN catalog the following volumes are assigned to the specified
file.
(&00): file name.
MARM1D3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D3 VOLUMES FOR DIRECTORY '(&00)' :
Meaning
In the MAREN catalog the following volumes are assigned to the specified
ARCHIVE directory.
MARM1D4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D4 FREE VOLUMES FOR DIRECTORY '(&00)' :
Meaning
In the MAREN catalog the following free volumes are assigned to the
free tape pool for the specified ARCHIVE directory.
MARM1D5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D5 FREE VOLUMES WITH DEVICE TYPE '(&00)' AND FREE TAPE POOL '(&01)' :
Meaning
In the MAREN catalog the following free volumes with device type (&00) are
assigned to the free tape pool (&01).
MARM1D6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D6 (&00) VOLUMES FOR USER ID '(&01)'
Meaning
In the MAREN catalog (&00) volumes are assigned to the user ID (&01).
(&00): number of volumes
(&01): user ID.
MARM1D7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D7 (&00) VOLUMES FOR FILE '(&01)'
Meaning
In the MAREN catalog (&00) volumes are assigned to the file (&01).
(&00): number of volumes
(&01): file name.
MARM1D8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D8 NO VOLUME IN MAREN CATALOG MATCHES SPECIFIED SELECTION CRITERIA
MARM1D9
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1D9 TOTAL OF (&00) VOLUMES IN MAREN CATALOG MATCH SPECIFIED SELECTION CRITERIA
Meaning
(&00): number of volumes.
MARM1E0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E0 THE SPECIFIED FILE IS NO MAREN CATALOG FILE
Meaning
The attributes of the specified file do not match those of a
MAREN catalog file or the read record has an invalid length.
Response
Check specified file.
MARM1E1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E1 ENTER: +N / -N / ++ / -- / 'ETX' / END; RECORD COUNTER = '(&00)'
Meaning
Meaning of possible inputs:
+N : Posit forward for n records (n = any number from 1 to 999999)
-N : Posit backward for n records ( " )
++ : Display last record of file
-- : Display first record of file
'ETX': Display next record ('ETX' = empty input)
END : Terminate execution of statement
(&00): Number of actual record within file.
MARM1E2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E2 ENTER: VSN / POS(VSN) / +N / -N / ++ / -- / 'ETX' / END
Meaning
Meaning of possible inputs:
VSN : Display first record for this VSN
POS(VSN): Posit to first record for this VSN. If there is no record for
this VSN, the first record for the next VSN will be displayed.
+N : Posit forward for n records (n = any number from 1 to 999999)
-N : Posit backward for n records ( " )
++ : Display last record of file
-- : Display first record of file
'ETX' : display next record ('ETX' = empty input)
END : Terminate execution of statement.
MARM1E3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E3 ENTER: FROM=VSN / LIST=VSN / VSN / +N / -N / ++ / -- / 'ETX' / END
Meaning
Meaning of possible inputs:
LIST=VSN: Display records for this VSN (important fields only)
FROM=VSN: Display records starting with this VSN (important fields only)
VSN : Display first record for this VSN
+N : Posit forward for n records (n = any number from 1 to 999999)
-N : Posit backward for n records ( " )
++ : Display last record of the file
-- : Display first record of the file
'ETX' : Display next record ('ETX' = empty input)
END : Terminate execution of statement.
MARM1E4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E4 BEGIN OF FILE REACHED
Meaning
While positioning backward the begin of file was reached.
Entering "+1" will cause the first record to be displayed.
MARM1E5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E5 END OF FILE REACHED
Meaning
While positioning forward the end of file was reached.
Entering "-1" will cause the last record to be displayed.
MARM1E6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1E6 INVALID INPUT
Response
Check and correct input.
MARM1IA
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1IA ERROR '(&00)' DURING INITIALIZATION OF VOLUME '(&01)' ON DEVICE '(&02)'
Meaning
Possible values for (&00):
0120: VSN does not match 'VOLUME CHECK'
0220: device type does not match device type specified in //INIT-VOL
0420: temporarily no device available
0620: no device available
0820: volume temporarily not available
0A20: volume not available
1020: device error
1420: unsuitable volume
2020: written volume specification (VOL1) is incorrect.
The program automatically tries to restart initialization.
Response
If necessary, remount the volume on another free device. If repeated
attempts are without success, dismount the volume and try to start
initialization again later.
If the error reason is uncertain, please check the console dialog
(CONSLOG) during the initialization attempts.
MARM1IB
Destination: USER-TASK, CONSOLE Routing code: T Weight: 90
Warranty : NO
MARM1IB MOUNT VOLUME '(&00)' ON DEVICE '(&01)' FROM ROBOT '(&02)'
Meaning
The robot is requested to mount the volume on the specified device.
Response
Once the volume has been mounted, the control software of the robot
issues an appropriate response.
MARM1IC
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1IC VOLUME '(&00)' CANNOT BE INITIALIZED
Meaning
Possible reasons:
- the volume is reserved
- the file expiration date has not yet been reached for a private volume
- the volume does not exist in the MAREN catalog.
- some volume attributes have been modified again after processing of
the instruction FREE-VOLUMES.
(&00): volume serial number (VSN).
MARM1ID
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1ID INIT device table overflow
Meaning
Too many volumes mounted on devices attached to the system.
Response
Please dismount some volumes and repeat the initialization request.
MARM1IE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1IE THIS USER-ID IS NOT ALLOWED TO USE THE ROLE '(&00)'. IN THIS CASE THE CURRENT ACTION IS RESTRICTED TO TSOS.
MARM1IF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1IF INTERNAL ERROR. //INIT-VOL CANNOT BE EXECUTED.
MARM1IG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1IG THE PARAMETER "UCON-USER-ID" IS MANDATORY IN THIS CASE
MARM1IH
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM1IH Error when connecting to UCON. Statement //INIT-VOLUMES cannot be executed.
MARM1I0
Destination: USER-TASK, CONSOLE Routing code: T Weight: 98
Warranty : NO
MARM1I0 INITIALIZE VOLUME MOUNTED ON DEVICE '(&00)'? REPLY (<VSN>=YES; =NO)
Meaning
The volume mounted on the specified device does not have standard labels.
(&00): device on which the volume is mounted.
Response
The operator has to reply to the message.
VSN: the volume with the specified VSN is to be initialized
: the volume on device (&00) is not to be initialized.
MARM1I1
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I1 MOUNT FOLLOWING VOLUMES ON DEVICE TYPE '(&00)' FOR INITIALIZATION
Meaning
The following MARM1I2 messages specify the volumes to be mounted
on free devices of the device type desired.
The order is arbitrary.
(&00) device type.
MARM1I2
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I2 '(&00)'
Meaning
List of the volumes to be initialized.
(&00): volume serial numbers (VSN).
MARM1I3
Destination: USER-TASK, CONSOLE Routing code: T Weight: 50
Warranty : NO
MARM1I3 TAPE '(&00)' INITIALIZED
Meaning
(&00): volume serial number (VSN).
Response
- If it is a free volume, it can be reserved again.
- If it is a foreign (PRIVATE) volume, the owner can again write to it.
MARM1I4
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I4 INIT-VOL OR OTHER PROGRAM USING UCON APPLICATION '(&00)' ALREADY ACTIVE
Meaning
INIT-VOL can be used only once in the same BS2000 system at any given
time.
Likewise, other programs cannot use the same UCON application name
at the same time.
(&00): name of the UCON application to be used.
Response
If possible, terminate the other UCON application and start INIT-VOL
again.
MARM1I5
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I5 SPECIFIED 'INIT-FILE' CONTAINS NO VOLUME FOR INITIALIZATION
Meaning
The file specified by means of the INIT-FILE operand contains no volume
that can be initialized with the specified DEVICE-TYPE.
Possible reasons:
- the INIT-FILE does only contain volumes which are located at a
roboter location, and this roboter location has not been
explicitely specified in INIT-LOCATION.
- the specified DEVICE-TYPE is invalid.
- in the MAREN catalog the entries of the volumes have been changed
since creation of the INIT-FILE.
- the INIT-FILE does not contain any volume which is located at the
specified INIT-LOCATION.
Response
Please specify the INIT-LOCATION explicitely, if it is a
roboter location.
If necessary, use //FREE-VOLUMES to create a new INIT-FILE.
MARM1I6
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I6 INVALID USER ID: PRIVILEGE 'TAPE-ADMIN' MISSING
Meaning
The //INIT-VOL statement can only be used under a user ID which has the
necessary privileges.
MARM1I7
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I7 BS2000 '(&00)' NOT SUPPORTED BY //INIT-VOL
Meaning
The //INIT-VOL statement cannot be used in this BS2000 version.
(&00): BS2000 version.
MARM1I8
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I8 INVALID TEXT IN /INFORM-PROGRAM , /INTR OR /SEND-MSG COMMAND
Meaning
No further information
MARM1I9
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM1I9 //INIT-VOL TERMINATED BY OPERATOR
Meaning
An /INTR or /SEND-MSG command with the message text STOP-INIT was
entered from the operator console or the terminal.
Not all volumes have been initialized.
MARM1R0
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARM1R0 EJECT REQUEST FOR VOLUME '(&00)' AT LOCATION '(&01)'; INFORMATION FOR ROBAR: '(&02)'
Meaning
The robot is requested to move the volume to the output chute.
(&00): volume serial number (VSN)
(&01): location name (TEMPORARY LOCATION)
(&02): internal work area for ROBAR.
MARM1R1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R1 INSERT REQUEST TO ROBOT FOR VOLUME '(&00)'
Meaning
The robot is requested to fetch the tape from the input window.
(&00): volume serial number (VSN).
MARM1R2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R2 INVALID VOLUME MOUNTED BY ROBOT ON DEVICE '(&00)'. REQUESTED: '(&01)', MOUNTED: '(&02)'
Meaning
(&00): device used
(&01): volume serial number (VSN) of the requested volume
(&02): volume serial number (VSN) of the volume actually mounted
MARM1R3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R3 VOLUME '(&00)' NOT MOUNTED BY ROBOT ON DEVICE '(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): device
MARM1R4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R4 EJECT REQUEST FOR VOLUME '(&00)' COULD NOT BE HONORED BY ROBOT
Meaning
Possible reasons:
- volume not cataloged in the robot archives
- no device assigned
- error occurred in the robot software or hardware.
(&00): volume serial number (VSN).
Response
If there is a foreign (PRIVATE) cartridge in the output chute of a
robot, it can only be exported by means of the ROBAR statement
//REMOVE-ROBAR-VOLUME.
MARM1R5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R5 EXPORT OR RETURN OF VOLUME '(&00)' NOT POSSIBLE DUE TO ERROR '(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): error code
01: volume in use
02: volume reserved for library
03: volume not in library
04: volume misplaced
05: volume inaccessible
06: volume manually ejected
10: internal system error (e.g. while requesting memory)
11: ATL internal error (e.g. library manager offline)
12: configuration not suitable (no device available).
Response
Check error code. Contact MAREN administrator, if necessary.
MARM1R6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R6 Change category of '(&00)' not possible due to '(&01)'
Meaning
Error reported while trying to change the volume category:
(&00):volume serial number (VSN)
(&01):error code
01 :volume in use
02 :volume reserved for library
03 :volume not in library
04 :volume misplaced
05 :volume inaccessible
06 :volume manually ejected
10 :internal system error (e.g. while requesting memory)
11 :ATL internal error (e.g. library manager offline)
12 :configuration not suitable (no device available)
20 :wrong volume category requested
21 :fast mount attribute could not be set (CentricStor)
Response
Check error code. Contact MAREN administrator, if necassary.
MARM1R7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM1R7 Logical volume '(&00)' could not be deleted from the library manager database due to error '(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): error code
01 : volume in use
02 : volume reserved for library
03 : volume not in library
04 : volume misplaced
05 : volume inaccessible
06 : volume manually ejected
10 : internal system error
11 : robot internal error (e.g. library manager offline)
12 : configuration not suitable (no device available)
Response
Check error code. Contact MAREN administrator if necessary.
MARM1R8
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM1R8 EJECT WILL BE RETRIED AFTER 30 SECONDS
Meaning
EJECT action during EXPORT-VOLUME statement was unsuccessful for the
volume specified in previous message MARM1R6. The EJECT action will
be retried after 30 seconds.
MARM1R9
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM1R9 EJECT FOR VOLUME '(&00)' FAILED. RETURNCODE '(&01)'
Meaning
During the processing of the statement //EXPORT-VOLUME or
//RETURN-VOLUMES the EJECT call for volume '(&00)' failed due to
the unexpected returncode '(&01)'.
Response
Please contact the system administrator.
MARM1S1
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARM1S1 SET VIRTUAL VOLUME '(&00)' OF SYSTEM '(&01)' AS FAST MOUNT. REPLY (0=OK; 1=NOK)
Meaning
The next mount of the virtual volume must be a fast-mount.
(&00): VSN of the virtual volume
(&01): location name that identifies the virtual robot system
Response
ROBAR interprets the message and issues the related CVA instruction to
the virtual robot.
MARM100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM100 MARENADM VERSION '(&00)' STARTED
Meaning
The program MARENADM with version number (&00) has been started.
MARM101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM101 FILE (&00) IS NO VALID (&01)-FILE
MARM102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM102 SPECIFIED MAREN CATALOG ENTRY '(&00)'/'(&01)' DOES NOT EXIST
Meaning
The desired statement could not be executed.
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Check the VSN and file sequence number and repeat the statement after
making the necessary corrections.
MARM103
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM103 CONTINUE ACTION? REPLY (Y=YES; N=NO)
Meaning
After every 18 MAREN catalog entry lines, the user is asked
whether or not processing is to be continued.
This request only appears in interactive mode and can be suppressed
by the statement operand OVERFLOW-CONTROL=BY-SYSTEM.
Response
Y: continue action
N: terminate action.
MARM104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM104 TOTAL OF (&00) MAREN CATALOG ENTRIES ERASED
MARM105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM105 TOTAL OF (&00) MAREN CATALOG ENTRIES ADDED
MARM106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM106 MAREN CATALOG ENTRY '(&00)'/'(&01)' ERASED
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
MARM107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM107 MAREN CATALOG ENTRY '(&00)'/'(&01)' ALREADY EXISTS
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Check the MAREN catalog entry.
MARM108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM108 MAREN CATALOG ENTRY '(&00)'/'(&01)' ADDED
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
MARM109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM109 NO MAREN CATALOG ENTRY WITH 'FILE-SEQ=1' EXISTS FOR VOLUME '(&00)'
Meaning
(&00): volume serial number (VSN).
MARM110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM110 VOLUME '(&00)' ALREADY EXPORTED
Meaning
The export date and the mailing address are recorded in the MAREN catalog
entry.
(&00): volume serial number (VSN).
Response
Check the VSN and repeat the statement after making the necessary
corrections.
MARM111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM111 ERROR '(&00)' WHILE DETERMINING VOLUMES
Meaning
Within a procedure file the spin-off mechanism will be triggered.
Possible values for (&00):
01: no MAREN catalog entries exist with specified file name.
02: no MAREN catalog entries exist for the specified file version.
03: not all volumes for the requested file version are in the MAREN
catalog (e.g. VOL-SEQ = 1 not existing).
04: at least one volume was not closed correctly (CLOSE-INDICATOR
in the MAREN catalog entry not set to CLOSED).
05: an error occurred while sorting the MAREN catalog entries.
Response
Check the MAREN catalog entries for the specified file name and make
any necessary corrections.
If the message MARM224 is displayed too, please consider the hints
for that message.
MARM112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM112 VOLUME STATUS '(&00)' FOR VOLUME '(&01)' ILLEGAL FOR REQUESTED FUNCTION. STATEMENT REJECTED
Meaning
(&00): volume status
(&01): volume serial number (VSN).
Response
Check the VSN and repeat the statement after making any necessary
corrections.
MARM113
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM113 MAREN CATALOG ENTRY '(&00)'/'(&01)' CHANGED BY ANOTHER TASK
Meaning
The specified catalog entry was modified, deleted or added by
another task when the statement was being executed.
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Repeat the statement.
MARM114
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM114 SPECIFIED FILE NOT FIRST ONE ON VOLUME '(&00)'. STATEMENT NOT EXECUTED
Meaning
The file is a part of a MF/MV set and is not the first file
on one of these volumes.
(&00): volume serial number (VSN).
Response
Check the statement.
MARM115
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM115 SPECIFIED FILE RESIDENT ON MIGRATED VOLUME '(&00)'. STATEMENT NOT EXECUTED
Meaning
The file is a part of a MF/MV set and at least one section of the file
is resident on a migrated volume.
(&00): volume serial number (VSN).
Response
Check the statement.
MARM116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM116 'FREE-DATE' NOT YET EXPIRED FOR VOLUME '(&00)'
Meaning
The expiration date of the specified volume (&00) is later than the
current date (see the FREE-DATE field in the MAREN catalog entry).
(&00): volume serial number (VSN).
Response
Check the expiration date and change it, if necessary.
MARM117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM117 SPECIFIED VOLUME TYPE ILLEGAL FOR NEW RESERVATION
Meaning
An attempt was made to reserve a volume device type which is not permitted
in the MAREN operand (RESERVE-DEVICE-TYPES).
Response
Check the volume type and, if necessary, make it available for
reservations
(see the //MODIFY-MAREN-PARAMETERS statement).
MARM118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM118 ALL FILES OF MAREN CATALOG CLOSED FOR HOST '(&00)'
Meaning
The MAREN catalog for host '(&00)' has been closed by means of the
statement //CLOSE-MAREN-FILES.
MARM119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM119 FILE '(&00)' WITH (&01) RECORDS CREATED
Meaning
(&00): name of the output file
(&01): number of records written.
MARM120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM120 TOTAL OF (&00) MAREN CATALOG ENTRIES PROCESSED
Meaning
The specified number of MAREN catalog entries were processed in the
course of the last function to be executed.
(&00): number of processed MAREN catalog entries.
MARM121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM121 MAREN CATALOG ENTRY '(&00)'/'(&01)' MODIFIED
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
MARM122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM122 TOTAL OF (&00) VOLUMES RELEASED
Meaning
(&00): number of volumes released.
MARM123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM123 (&01) RECORDS READ FROM FILE '(&00)'
Meaning
(&00): name of the input file
(&01): number of records read.
MARM124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM124 VOLUME '(&00)' NOT FREE
Meaning
(&00): volume serial number (VSN).
Response
First release the volume and then delete the MAREN catalog entry.
MARM125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM125 Logical volume '(&00)' erased from the library manager database
Meaning
The specified volume became unknown to the library manager.
(&00): volume serial number (VSN)
Response
None
MARM127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM127 VOLUME '(&00)' RESERVED FOR USER ID '(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): user ID.
MARM128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM128 INVALID 'FREE-DATE' OR 'EXPIRATION-DATE'
Meaning
The specified statement could not be executed.
Possible reasons:
- volume FREE-DATE less than file EXPIRATION-DATE or less than
current date
- file EXPIRATION-DATE less than current date.
Response
Check the expiration dates.
MARM129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM129 VOLUME '(&00)' IS NOT MAGNETIC TAPE
Meaning
Only magnetic tapes can be processed using the statement entered.
(&00): volume serial number (VSN).
Response
Check the input.
MARM130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM130 VOLUME '(&00)' RELEASED FOR INITIALIZATION; USER ID '(&01)', FILE NAME '(&02)', CURRENT LOCATION '(&03)'
Meaning
In the case of the specified volume, the expiration date has been exceeded
and the INIT flag set, i.e. the volume must be initialized before any new
reservation is made.
(&00): volume serial number (VSN)
(&01): user ID
(&02): file name
(&03): name of the present location.
MARM131
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM131 VOLUME '(&00)' NOW EXPORTED
Meaning
(&00): volume serial number (VSN).
MARM132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM132 VOLUME '(&00)' NOT EXPORTED
Meaning
The specified volume cannot be returned because it has not been exported.
(&00): volume serial number (VSN).
Response
Check the VSN.
MARM133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM133 VOLUME '(&00)' EXPORTED SINCE '(&01)'
Meaning
The specified volume is still exported (see export date and mailing
address).
(&00): volume serial number (VSN)
(&01): export date.
MARM134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM134 GET VOLUME '(&00)' FROM CENTRAL ARCHIVE
Meaning
The volume has been exported and can be fetched from the central archive.
(&00): volume serial number (VSN).
MARM135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM135 INVALID LOCATION '(&00)'
Meaning
Possible reasons:
- The specified location is not in the location table of the MAREN
parameter set.
- The requested roboter location is defined as REMOTE at the local host.
(&00): location name.
Response
Check the statement; contact the MAREN administrator, if necessary.
MARM136
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM136 INVALID NUMBER RANGE SPECIFIED
Meaning
The automatic creation of VSNs is not possible with the specified
number range.
Possible reasons:
- positions of numeric parts not identical
- lengths of numeric parts not identical
- more than one numeric part
- start of number range higher than end of number range
- non-numeric parts not identical.
Response
Try again using a valid number range specification.
MARM137
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM137 VOLUME '(&00)' NOW FREE ( USER ID '(&01)', FILE NAME '(&02)' )
Meaning
(&00): volume serial number (VSN)
(&01): user ID
(&02): file name.
MARM138
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM138 VOLUME '(&00)' IMPORTED
Meaning
The export flag for the volume has been deleted.
(&00): volume serial number (VSN).
MARM139
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM139 MAREN CATALOG OPENED FOR HOST '(&00)'. CATALOG LOCK RESET
Meaning
No further information.
MARM140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM140 MAREN CONTROL PROGRAM FOR HOST '(&00)' TERMINATED
Meaning
The MAREN control program MARENCP has been terminated for host '(&00)'.
MARM141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM141 INVALID LOCATION NAME ON HOST '(&00)'
Meaning
The specified location or symbolic location is not compatible with
the names already entered in the location table for host '(&00)'.
Response
Check the location name.
MARM142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM142 MAREN CATALOG ENTRY '(&00)'/'(&01)' DOES NOT MATCH SELECTION CRITERIA
Meaning
The spin-off mechanism is triggered.
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
MARM143
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM143 VOLUME '(&00)' NOT RELEASED BECAUSE STILL IN ARCHIVE DIRECTORY '(&01)'
Meaning
The volume cannot be released because it is still
assigned to the pool of an ARCHIVE directory.
(&00): volume serial number (VSN)
(&01): name of the ARCHIVE directory.
MARM144
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM144 (&00) ARCHIVE VOLUMES WITH EXPIRED 'FREE-DATE' NOT RELEASED
Meaning
A number of volumes with expired FREE-DATE could not be released because
they are still assigned to the pools of ARCHIVE directories.
(&00): number of volumes.
MARM145
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM145 OVERFLOW ON DEVICE TYPE TABLE FOR HOST '(&00)'. NO MORE DEVICE TYPES CAN BE ADDED
Meaning
No more device types for new reservations can be added to the device
type table of the MAREN parameter set for host '(&00)' because
there is no more free space in this table.
Response
Delete device types that are no longer required or replace them
with valid device types.
MARM146
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM146 OVERFLOW ON LOCATION TABLE FOR HOST '(&00)'. NO MORE LOCATIONS CAN BE ADDED
Meaning
No more locations can be added to the location table for host
'(&00)' because there is no more free space in this table.
Response
Delete location names that are no longer required or replace them
with valid location names.
MARM147
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM147 DEVICE TYPE NOT INCLUDED IN DEVICE TYPE TABLE FOR HOST '(&00)'
Meaning
The specified device type is not present in the device type table of the
MAREN parameter set for host '(&00)' and therefore cannot be erased.
Response
Check the statement.
MARM148
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM148 LOCATION NOT PRESENT IN LOCATION TABLE FOR HOST '(&00)'
Meaning
The specified location name is not present in the location table
of host '(&00)' and therefore cannot be erased.
Response
Check the statement.
MARM149
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM149 VOLUME '(&00)' ALREADY EXPORTED TO '(&01)'. PROCESSING CONTINUES NORMALLY
Meaning
The volume has already been exported to the specified address.
(&00): volume serial number (VSN)
(&01): last export address.
MARM150
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM150 MIGRATED VOLUME AVAILABLE AGAIN
Meaning
A foreign (PRIVATE) volume was returned. As a result, a
migrated volume with the same VSN is available again.
MARM151
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM151 MIGRATED VOLUME '(&00)' NO LONGER EXISTS
Meaning
A foreign (PRIVATE) volume was returned.
When trying to make a migrated volume with the same VSN available
again it was discovered that the specified volume no longer exists
in the MAREN catalog.
(&00): volume serial number (VSN).
Response
Check all the entries for the specified volume in the MAREN logging file.
MARM152
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM152 VOLUME '(&00)' CANNOT BE MIGRATED
Meaning
A foreign (PRIVATE) volume cannot be added to the MAREN
catalog because there already is a catalog entry with the same VSN.
Possible reasons:
- a volume with the same VSN has already been migrated
- it is a multi-file volume
- migration is not possible in batch mode.
(&00): volume serial number (VSN).
Response
Check the MAREN catalog entry for possible reasons.
MARM153
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM153 VOLUME '(&00)' ALREADY IN MAREN CATALOG. VOLUME TO BE MIGRATED? REPLY (Y=YES; N=NO)
Meaning
While adding a foreign (PRIVATE) volume it was detected that
the specified VSN already exists in the MAREN catalog.
(&00): volume serial number (VSN).
Response
Y: the volume entered in the MAREN catalog will be migrated. As a result,
it will not be possible to access this volume until the new volume
with the same VSN is returned.
N: the statement will be aborted.
MARM154
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM154 FREE-DATE '(&01)' FOR VOLUME '(&00)' LOWER THAN EXPIRATION-DATE '(&02)'
Meaning
The corresponding MAREN catalog entry will not be modified.
(&00): volume serial number (VSN)
(&01): expiration date of volume (FREE-DATE)
(&02): expiration date of file (EXPIRATION-DATE).
Response
Set a lower expiration date for the file as well, if necessary.
MARM155
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM155 NO MORE SUITABLE FREE VOLUMES AVAILABLE
Meaning
No volume complying with all the specified selection criteria
(device type, location, INIT=NO, etc.) is available in the MAREN
catalog.
Response
Check the statement; contact the MAREN administrator, if necessary.
MARM156
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM156 ONLY (&00) OF THE REQUESTED (&01) VOLUMES RESERVED
Meaning
The required number of volumes to be reserved is not available
in the MAREN catalog.
(&00): number of reserved volumes
(&01): number of requested volumes.
Response
Check the statement; contact the MAREN administrator, if necessary.
MARM157
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
MARM157 DO YOU REALLY WANT TO CANCEL LOCK ON THIS VOLUME? REPLY (Y=YES; N=NO)
Meaning
The volume specified in the statement may still be reserved by another
task. Access to the volume is only possible if the lock set
by this task is canceled in the MAREN catalog entry.
Response
Y: the internal MAREN volume lock is reset
N: the volume lock is not reset.
MARM158
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM158 INTERNAL TABLE OVERFLOW MAY RESULT IN INCOMPLETE OUTPUT
Meaning
A table overflow may have prevented all the catalog entries for the file
name specified in the statement from being listed. On output, only entries
with a VSN larger than those last output may be omitted.
Task switch 30 is set.
Response
All catalog entries for the specified file are obtained by means of the
//PRINT-VOLUME-ATTRIBUTES statement, which creates a list of all
MAREN catalog entries (sorted by file names, if required).
MARM159
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM159 LOCATION '(&00)' IS REMOTE AND CANNOT BE USED WITHIN THE STATEMENT 'RESERVE-FREE-VOLUME'
MARM160
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARM160 ACCEPT MAILING ADDRESS '(&00)' FOR VOLUME '(&01)'? REPLY (Y=YES; N=NO)
Meaning
When exporting a volume, the operator is requested to check the specified
mailing address.
(&00): mailing address
(&01): volume serial number (VSN).
Response
Y: the mailing address is accepted
N: the mailing address is rejected.
Exporting the volume to the specified address is not permitted.
MARM162
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM162 SEND VOLUME '(&00)' TO MAILING ADDRESS '(&01)'. TEMPORARY LOCATION '(&02)'
Meaning
(&00): volume serial number (VSN)
(&01): mailing address
(&02): temporary location.
Response
Send the volume as specified.
MARM163
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM163 MAILING ADDRESS '(&00)' REJECTED BY OPERATOR
Meaning
The specified mailing address was not accepted by the operator.
Processing of the statement is aborted.
(&00): mailing address.
Response
Check the specified mailing address and enter the statement again,
if necessary.
MARM166
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM166 VOLUME '(&00)' ALREADY RETURNED TO 'HOME-LOCATION'
Meaning
Relocation of the specified volume is not necessary because it
is already at its home location.
(&00): volume serial number (VSN).
MARM167
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM167 VOLUME '(&00)' HAS A DIFFERENT 'HOME-LOCATION'
Meaning
The home location of the specified volume is not the same as the one
specified by the //RETURN-VOLUMES statement.
(&00): volume serial number (VSN).
Response
Check the specified VSN and the home location.
MARM168
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM168 VOLUME '(&00)' SECURED FOR MARENUCP AT LOCATION '(&01)'
Meaning
The free volume (&00) was transferred to the specified location and is
flagged for reservations by the automatic free tape allocation facility
(MARENUCP). No other reservations may be processed for this volume.
(&00): volume serial number (VSN)
(&01): new temporary location (TEMPORARY-LOCATION).
MARM169
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM169 VOLUME '(&00)' AVAILABLE FOR RESERVATIONS AT LOCATION '(&01)'
Meaning
The free volume (&00) has been transferred to the specified location
and is there available for any type of reservation.
(&00): volume serial number (VSN)
(&01): new temporary location (TEMPORARY-LOCATION).
MARM17A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM17A MULTIPLE VALUE SPECIFICATION FOR STATEMENT OPERAND '(&00)'. STATEMENT REJECTED
MARM170
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM170 STATEMENT '(&00)' PROCESSED
MARM171
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM171 PROCESSING OF STATEMENT '(&00)' TERMINATED WITH ERRORS
Meaning
Within a procedure file a branch is made to the next //STEP statement or
to //END.
Task switch 31 has been set.
Response
Follow the instructions in preceding messages and enter the statement
again, if necessary.
MARM172
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM172 SYSDTA EOF. STATEMENT '//END' MISSING
Meaning
All statements from the assigned SYSDTA file were read and, if correct,
also executed without encountering the //END statement.
Response
Check if the correct SYSDTA file was assigned and add the //END statement
where necessary.
MARM173
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM173 PROGRAM '(&00)' DOES NOT EXIST WITHIN ACTIVATED SYNTAX FILES
Meaning
No statements to the loaded program can be entered.
(&00): SDF-internal program name.
Response
Contact the MAREN administrator.
MARM174
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM174 NO MORE MAREN STATEMENTS WILL BE PROCESSED
Meaning
The MAREN or MARENADM subprogram has already been terminated by
entering the //END statement.
Response
Terminate and restart the loaded main program. After this MAREN or
MARENADM statements can be entered again.
MARM175
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM175 INVALID VALUE ENTERED FOR OPERAND '(&00)'. STATEMENT REJECTED
Meaning
(&00): operand name.
Response
Enter the statement after making the necessary corrections.
MARM176
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM176 STATEMENT '(&00)' TERMINATED BY CALLER
Meaning
Task switch 30 has been set.
(&00): statement.
Response
Enter the statement again, if necessary.
MARM177
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM177 The catalog copy file '(&00)' must be in NK format if TO-VERSION-CATALOG is V8.1 or higher.
Meaning
The user has specified a filename by means of ADD-FILE-LINK ...,
LINK=MARENCVC and this file has not the NK format.
It is then not possible to create alternate indexes.
(&00): specified filename for the COPY-VOLUME-CATALOG statement.
Response
None.
MARM178
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM178 INVALID MAILING ADDRESS FOR VOLUME '(&00)'
Meaning
No valid mailing address exists in the MAREN catalog for the specified
volume.
(&00): volume serial number (VSN).
Response
Specify the mailing address in the statement or first modify the
MAREN catalog entry and then enter the statement again.
MARM179
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM179 INVALID COMBINATION OF MAREN CATALOG ENTRY FIELDS OR OPERANDS '(&00)' AND '(&01)'. ACTION NOT PROCESSED
Meaning
The action was not processed because the MAREN catalog entry fields or
statement operands (&00) and (&01) do not match either logically or with
regard to their contents.
(&00): first MAREN catalog entry field or operand, respectively
(&01): second MAREN catalog entry field or operand, respectively.
Response
Check the specified fields and repeat the action, if necessary.
MARM180
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM180 STATEMENT INVALID WHEN USING PROGRAM INTERFACE
Meaning
The specified statement or the individual statement operands (e.g.
OUTPUT=...) cannot be processed when the program interface is in use.
Response
Correct the main program which is calling the MAREN program interface.
MARM181
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM181 INTERNAL ERROR IN MAREN ROUTINE '(&00)'
Meaning
The following messages contain further diagnostic information.
(&00): name of the errored subroutine.
Response
Contact the MAREN administrator.
MARM183
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM183 MARENADM TERMINATED ABNORMALLY
Meaning
The error causing the termination of the program is described
in more detail in the preceding messages.
Task switch 31 is set.
Response
Eliminate the error and then start MARENADM again.
MARM184
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : YES
MARM184 ERROR '(&00)' DURING PROCESSING OF MACRO '(&01)'
Meaning
(&00): return information
(&01): name of the macro.
Response
For more detailed information see the BS2000 manual 'Executive Macros'
or ask the BS2000 service team.
Eliminate the error, then start the program again.
MARM186
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM186 (&00) MAREN CATALOG ENTRIES OF FREE VOLUMES PROCESSED
Meaning
No further information.
MARM187
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM187 (&00) MAREN CATALOG ENTRIES OF ALLOCATED VOLUMES PROCESSED
Meaning
No further information.
MARM188
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM188 INVALID CONTENTS IN FIELD '(&00)' OF MAREN PARAMETERS FOR HOST '(&01)'
Meaning
The host-specific parameter contains data which cannot be specified in
any MAREN statement. Maybe the field from the MAREN catalog has been
changed with the aid of other programs and now these changes prevent the
MAREN parameters from being processed correctly.
(&00): name of the MAREN parameters field
(&01): host name.
Response
If possible, supply the MAREN catalog entry with valid contents,
then repeat the action.
MARM189
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
MARM189 SYNTAX ERROR IN COMMAND OR STATEMENT
Meaning
Possible reasons:
- the specified command or statement name is unknown.
- at least one of the specified operand names is unknown.
- at least one of the operand values is invalid.
- when using the program interface, one of the SDF global statements
(e.g. //REMARK) has been entered.
- different MAREN versions in use.
- when using MARENADM, the MAREN password has not been given.
Response
If the statement was entered via the program interface,
the program must be corrected and started again.
Otherwise check whether the MAREN programs or the MAREN subsystem have
the same version states as the active MAREN syntax files.
If not, the out-of-date component must be replaced by the current one.
When using MARENADM, enter the MAREN password by means of /ADD-PASSWORD
command, than invoke the program again.
MARM190
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM190 WARNING: NEW MAREN CATALOG ENTRY '(&00)'/'(&01)' CREATED DURING OFFLINE LOGGING INCOMPLETE
Meaning
On execution of the statement //UPDATE-MAREN-CATALOG, a VSN not
contained in the MAREN catalog was found in an OFFLINE logging record.
A new MAREN catalog entry was created, some of whose fields are empty
(e.g. VSEQ for input) or contain default values
(e.g. USER-ACCESS=OWNER-ONLY).
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
The MAREN catalog entry must be singled out for correction by means of the
MARENADM statement //MODIFY-VOLUME-ATTRIBUTES or //EDIT .
MARM191
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM191 PROCESSING OF MAREN CATALOG STARTED
Meaning
The creation of accounting records from the MAREN catalog has been
started.
MARM192
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM192 PROCESSING OF LOGGING FILE STARTED
Meaning
The creation of accounting records from the logging file has been started.
MARM193
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM193 (&00) ACCOUNTING RECORDS CREATED FOR RESOURCE TYPE '(&01)'
Meaning
(&00): number of accounting records
(&01): resource type.
MARM194
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM194 INVALID CONTENTS IN FIELD '(&00)' OF MAREN CATALOG ENTRY '(&01)'/'(&02)'
Meaning
The specified MAREN catalog entry field contains data which cannot be
specified in any MAREN statement. Maybe the MAREN catalog entry has been
changed with the aid of other programs and these changes now prevent
the volume from being processed correctly.
(&00): name of the MAREN catalog entry field
(&01): volume serial number (VSN)
(&02): file sequence number (FSEQ).
Response
If possible, supply the MAREN catalog entry with valid contents by means
of a MAREN or MARENADM statement, then repeat the action.
MARM195
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM195 NO DIRECT ACCESS TO MAREN CATALOG POSSIBLE
Meaning
Possible reasons:
- the DMS protection attributes for the MAREN catalog do not allow any
access for caller, e.g. files under foreign user ID and not sharable.
- the MAREN catalog files are located on a foreign processor to which
no connection was established before the program call.
- in the start procedure for MARENCP the parameter SHARED-UPDATE=YES
is omitted in the /SET-FILE-LINK or /ADD-FILE-LINK commands
for the MAREN catalog files.
- no access was possible to the computer-center-specific exit library
or an error occurred while loading one of these exits.
If this message is issued all accesses to the MAREN catalog will be done
by the control program MARENCP, which will cause a significant increase
of the access times.
Response
- Modify protection attributes for the MAREN catalog files or specify
existing file passwords before the program start.
- Establish a connection to the MAREN catalog processor before the
program start by means of command /SET-RFA-CONNECTION.
- Add the parameter SHARED-UDPATE=YES to the file assignments for the
MAREN catalog in the start procedure for MARENCP.
- Enable the access to the MAREN exit library or the linkage of the
individual exits.
MARM196
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM196 warning : for vsn '(&00)' start-date is higher than end-date
Meaning
when building RAV record, maren has detected that
for a given vsn, the start-date
is higher than the end-date. This can be the result
of a manipulation on the
vsn with MARENADM. In that case, maren generates
value 0 for field AMOUNT.
MARM197
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM197 ACCESS TO HOST '(&00)' NOT POSSIBLE
Meaning
Access to host '(&00)' not possible.
(&00): Concerned host.
Possible reasons:
The MSCF-connection between own and foreign host is not active.
Own and foreign host do not belong to the same MAREN network.
MARM198
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM198 MARENADM TERMINATED NORMALLY
MARM199
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM199 WARNING: Volume '(&00)' is marked as 'open'. Please mark the volume as 'closed' before you enter //FREE-VOLUMES
Meaning
When the reason (CLOSE-INDICATOR set to open) is known, the
administrator may set, with MODIFY-VOLUME-ATTRIBUTES, the
value CLOSE to the CLOSE-INDICATOR and issue a FREE-VOLUMES
for this volume.
MARM2E5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM2E5 INDEX ENTRIES NOT ASCENDING FOR USER ID '(&00)'
Response
Update the index entries by means of the MARENADM statement
//VERIFY-MAREN-CATALOG
MARM2E6
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MARM2E6 INDEX ENTRIES NOT ASCENDING FOR FREE POOL WITH DEVICE TYPE '(&00)' AND FREE-POOL '(&01)'
Response
Update the index entries by means of the MARENADM statement
//VERIFY-MAREN-CATALOG .
MARM201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM201 FREE-POOL '(&00)' DOES ALREADY EXIST
Meaning
The FREE-POOL-NAME '(&00)' mentioned within a MARENADM statement
for adding FREE-POOLs does already exist. The statement can be
repeated with a different FREE-POOL-NAME
MARM202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM202 THE FREE-POOL '(&00)' CONTAINS SOME VOLUMES AND CAN THEREFORE NOT BE REMOVED
Meaning
The FREE-POOL '(&00)' specified within a MARENADM statement is not
empty and can therefore not be removed.
MARM203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM203 FREE POOL '(&00)' DOES NOT EXIST
Meaning
No further information.
MARM204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM204 ADD FREE-POOL '(&00)' FAILED, MARENCP FUNCTION-NUMBER (&01), RETURNFLAG '(&02)'
Meaning
A MARENADM statement for adding the FREE-POOL '(&00)' failed due to
unexpected reasons. For diagnostic purpose the
MARENCP-FUNCTION-NUMBER (&01) and the RETURNFLAG '(&02)' are
displayed
MARM205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM205 REMOVE FREE-POOL '(&00)' FAILED. MARENCP FUNCTION-NUMBER (&01) AND RETURNFLAG '(&02)' ARE DISPLAYED FOR DIAGNOSTIC PURPOSE
Meaning
A MARENADM statement in order to remove the FREE-POOL '(&00)'
failed due to unexpected reasons. For diagnostic purpose the
MARENCP FUNCTION-NUMBER (&01) and the RETURNFLAG '(&02)' are
displayed
MARM206
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM206 DURING DISPLAY OF MAREN FREE-POOL LIST AN ERROR OCCURED. MARENCP RETURNFLAG '(&00)'
Meaning
During the Processing of the MARENADM instruction
SHOW-MAREN-PARAMETERS the display of the FREE-POOLS has been
aborted due to an unexpected MARENCP RETURNFLAG '(&00)'. The
list of the FREE-POOLS may be incomplete
MARM207
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM207 FREE-POOL '(&00)' IN USE BY A CONCURRENT ACTION. PLEASE RETRY LATER
Meaning
The specified MAREN FREE-POOL '(&00)' is currently affected by a
concurrent MAREN action. Please retry MARENADM statement later
MARM208
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM208 MAREN FREE-POOL '(&00)' DOES NOT EXIST. THE CREATION OF MAREN FREE-POOLS IS RESTRICTED TO MARENADM
Meaning
Within the enterred MAREN statement MODIFY-VOLUME-ATTRIBUTES a
FREE-POOL has been specified which does not exist. So the
statement cannot be processed. The creation of new MAREN
FREE-POOLs is restricted to the privileged program MARENADM
MARM210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM210 FREE POOL '(&00)' DOES NOT EXIST. THE CONCERNED VOLUMES WILL BE ASSIGNED TO FREE-POOL '*NO'
Meaning
No further information.
MARM211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM211 FREE-POOL '(&00)' IMPLICITELY CREATED BY MARENADM STATEMENT 'MODIFY-VOLUME-ATTRIBUTES'
Meaning
No further information
MARM212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM212 NO SUITABLE VOLUME FOUND IN FREE POOL '(&00)'
Meaning
No suitable volume found in FREE POOL '(&00)'. Perhaps the FREE POOL
'(&00)' might be empty or does not exist.
MARM213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM213 INTERNAL ERROR - INVALID FREE POOL NAME DETECTED. THE CURRENT STATEMENT WILL BE TERMINATED
Meaning
No further information
MARM214
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM214 FREE-POOL-NAME '(&00)', LAST ACCESS FUNCTION NAME '(&01)', FUNCTION NUMBER '(&02)'
Meaning
During the handling of the MARENADM statement SHOW-MAREN-FILE a
FREE-POOL-Record was found. The concerned FREE-POOL has the name
'(&00)' and was at last written or modified by the MAREN function
'(&01)', function number '(&02)'
MARM215
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM215 AFTER DISPLAY OF (&00) VSNS MATCHING THE SELECTION CRITERIA THE STATEMENT WAS CANCELLED BY USER. FURTHER VSNS ARE FOUND
Meaning
(&00) VSNs matching the specified selection criteria have been
displayed. Then the user has replied one of the questions
'MARM103 CONTINUE ACTION ?' by enterring 'N'. So the statement
has been cancelled and the list of diplayed VSNs is incomplete.
At least one further VSN is found which also matches the
specified selection criteria.
MARM216
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM216 FREE-POOL-RECORD '*NO' MUST NOT BE ERASED
Meaning
No further information.
MARM217
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM217 INTERNAL MAREN ERROR REPORTED WITHOUT MESSAGE NUMBER. FUNCTION NUMBER '(&00)', RETFLAG '(&01)'
Meaning
A MAREN-Function called by MAREN or MARENADM has been rejected by
MARENCP, OFFLINE or the MAREN-Subsystem. The acknowledgement did not
contain any valid message number.
For meaning of RETFLAGs see MAREN manual.
MARM218
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM218 SPECIFIED PRIVATE-DISK '(&00)' IS PUBLIC-DISK
Meaning
No further information.
MARM219
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM219 NO FILENAME FOUND BEING ASSIGNED TO LINKNAME
Meaning
No further information.
MARM220
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM220 WARNING: FILE (&00) ON VOLUME (&01) HAS STILL A CATALOG ENTRY IN A TSOSCAT. CONTINUE ACTION? REPLY (Y=YES; N=NO)
Meaning
There is still a catalog entry in a TSOSCAT for a file on the tape
that is to be released. Please make sure it is no longer needed.
(&00): filename of the referred catalog entry
(&01): volume serial number (VSN) of the tape
Response
Y: continue action
N: terminate action.
MARM221
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM221 FOR MAREN CATALOG ENTRIES WITHOUT DIRECTORY-NAMES SAVE-FILE-IDS CANNOT BE CHANGED (UNLESS CLEARED)
Meaning
MAREN catalog entries without directories should not have
SAVE-FILE-IDs. So in this case, SAVE-FILE-IDs may be cleared,
but not be changed otherwise.
MARM222
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM222 (&00) FREE-POOL NAMES DISPLAYED
Meaning
(&00) FREE-POOL-Names are processed by the statement. If the user
has broken off the statement, the number of FREE-POOL-NAMES in the
MAREN catalog may also be greater than (&00).
MARM223
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM223 THE DIRECTORY IN MAREN CATALOG ENTRY FOR VSN '(&00)' IS VALID AND CAN THEREFORE NOT BE CLEARED OR CHANGED
MARM224
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM224 CREATION DATE OR CREATION TIME MISSING FOR FILE ON VSN '(&00)', FSEQ '(&01)'
Meaning
In the MAREN Catalog Entry for VSN '(&00)', FSEQ '(&01)', the
CREATION DATE or the CREATION TIME are missing for the specified
tape file. Possibly, other tapes belonging to the same TAPESET
may also be concerned by this problem.
Response
Please check the MAREN catalog entry for VSN '(&00)', FSEQ '(&01)'
(statement //SHOW-VOLUME-ATTRIBUTES). If no further errors have
occured during creation of the tape file, insert the missing
attributes (statement //MODIFY-VOLUME-ATTRIBUTES or //EDIT ). If
neccessary, repeat these actions for other tapes belonging to the
same TAPESET.
MARM225
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM225 VOLUME '(&00)' HAS A DIFFERENT 'FREE-LOCATION'
Meaning
The Free Location of volume (&00) in the MAREN catalogue is not the
same as specified in the //FREE-VOLUMES statement. So the volume is
not released.
Response
Please check VSN and Free Location. If the displayed volume is to
be released, there are the following possibilities:
- the operand FREE-LOCATION in the //FREE-VOLUMES statement can be
omitted, or
- the correct value for FREE-LOCATION in the //FREE-VOLUMES
statement can be specified, or
- the FREE-LOCATION of the displayed volume can be changed in the
MAREN catalogue.
MARM226
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM226 DO YOU REALLY WANT TO DELETE THE ACTUAL RECORD ? PLEASE REPLY 'ELIMINATE' IF YOU ARE SURE
Meaning
If this question is replied by 'ELIMINATE', the record which was
displayed at last will be deleted within the catalog- or logging file
used by the //SHOW-MAREN-FILE statement. All other replies will
not cause any change within this file.
MARM227
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM227 ELIMINATION OF RECORDS ONLY ALLOWED FOR ISAM-FILES AND NOT IN BATCH MODE. THE FILE IS OPENED FOR READ ONLY
Meaning
The elimination of some records by the MARENADM-statement
//SHOW-MAREN-FILE is only allowed, when the file is an ISAM-file
and the statement is not running in batch mode. The file will be
opened in READ-ONLY mode.
MARM228
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM228 LAST DISPLAYED RECORD ELIMINATED
Meaning
No further information.
MARM229
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM229 ELIMINATE-REQUEST WITHDRAWN
Meaning
No further information.
MARM23A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM23A DOMAIN RECORD FOR DOMAIN '(&00)'
MARM230
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM230 THE MAREN PARAMETER RECORD MUST NOT BE ELIMINATED
Meaning
No further information.
MARM231
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM231 EOF ENCOUNTERED DURING READ OF TURN PARAMETERS WHILE PROCESSING //SHOW-MAREN-FILE
Meaning
While processing the MARENADM statement //SHOW-MAREN-FILE in
procedure mode , EOF condition occured in RDATA call for the
procedure file. Possible reasons:
- The END parameter is missing in the procedure , or
- a statement or command (beginning with '/') is read instead
of a turn parameter.
MARM232
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM232 THE SPECIFIED VSN '(&00)' DOES ALREADY EXIST IN MAREN CATALOG FOR A DIFFERENT DOMAIN OR ITS MAREN CATALOG ENTRY IS CURRENTLY CHANGED BY ANOTHER TASK
Meaning
Possible reasons:
- The specified VSN does already exist in MAREN catalog and belongs
to a different domain.
- The maren catalog entry for the specified VSN is currently added,
modified or deleted by a concurrent task.
MARM233
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM233 SORT-OPEN-ERROR OCCURED DURING PROCESSING OF STATEMENT //PRINT-VOLUME-ATTRIBUTES
MARM234
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM234 DURING PROCESSING OF MARENADM STATEMENT //SHOW-MAREN-FILE AN UNEXPECTED RECORD WAS READ. WRONG RECORD-TYPE OR RECORD-LENGTH
Meaning
Possible reasons:
- The file was not been generated with MAREN.
- The reading MAREN version is not compatible with the MAREN
version which was used for generating the file.
- Some records have been damaged.
Inspite of the invalid record reading of further records can be
continued.
MARM235
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM235 THE SELECTED RECORD BELONGS TO A FOREIGN DOMAIN AND IS THEREFORE NOT DISPLAYED
Meaning
- The turn operations for the file can be continued. The actual
position is the same as if the current record would belong to a
domain administrated by the calling MARENADM and would therefore
have been displayed.
- All records can be displayed if either the calling MARENADM is
administrator for all domains or the domain-function is switched
off.
MARM236
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM236 FREE VOLUMES WITH FREE TAPE POOL '(&00)' AND DOMAIN '(&01)' :
Meaning
No further information.
MARM237
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM237 (&00) FREE VOLUMES FOUND WITH FREE TAPE POOL '(&01)' AND DOMAIN '(&02)'
Meaning
No further information.
MARM238
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM238 VOLUMES FOR USER-ID '(&00)' AND DOMAIN '(&01)'
Meaning
No further information.
MARM239
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM239 (&00) VOLUMES FOUND FOR USER-ID '(&01)' AND DOMAIN '(&02)'
Meaning
No further information.
MARM240
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM240 CONCURRENT ACTIONS CONCERNING HOST- OR PARAMETER- RECORDS. PLEASE RETRY STATEMENT LATER
Meaning
Due to a concurrent access to the Host- or Parameter-Records the
statement could be executed either partially only or not at all.
Response
Please check the results of the statement and retry the statement
later, with original or modified operands, depending on the
results of the stament.
MARM241
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM241 PROCESSING OF MARENADM STATEMENT //VERIFY-MAREN-CATALOG ABORTED DUE TO A NEGATIVE ACKNOWLEDGEMENT. RETFLAG '(&00)'
Meaning
During the processing of MARENADM statement //VERIFY-MAREN-CATALOG
a negative acknowledgement occured and the processing has been
aborted. In case of RETFLAG 'D' a DMS-Error occured. Otherwise an
internal error was detected.
Response
In case of RETFLAG 'D' please check the state and the attributes
of the MAREN catalog. Sometimes the following action will be
successful:
- Enter the command /REPAIR-DISK-FILE for the MAREN catalog.
- Then repeat the MARENADM statement //VERIFY-MAREN-CATALOG .
MARM242
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM242 CENTRIC-STOR ROBOTER LOCATIONS ARE ILLEGAL FOR PRIVATE VOLUMES
Meaning
Centric-Stor roboter locations work with Virtual Volumes. The
correlation between Virtual Volumes and Real Volumes is not
visible to MAREN. The processing of Private Volumes is needs the
knowledge of the Real Volume. So at such locations the processing
of Private Volumes is not possible.
Response
Please repeat the statement with a different location.
MARM243
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM243 VOLUME '(&00)' NOT FREED. REASON '(&01)'
Meaning
Volume '(&00)' not freed because reason '(&01)':
01: For the mentioned volume, the INIT-Flag is set to ERASE and no
INIT-FILE is specified. Please reenter the statement
FREE-VOLUMES with an INIT-FILE .
??: Other reasons.
MARM250
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARM250 Variable '(&00)' created with TYPE=*STRUCTURE and MULTIPLE-ELEMENTS=*LIST
Meaning
Variable was created, because it doesn't exists.
(&00): Name of the variable.
MARM260
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM260 FILENAME FOR MANDATORY INSTALLATION ITEM WITH LOGICAL ID '(&00)' MISSING
Meaning
No further information.
MARM261
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM261 MANDATORY INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' DOES NOT EXIST
Meaning
No further information.
MARM262
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM262 INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' IS EMPTY
Meaning
No further information.
MARM263
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM263 INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' IS NOT SHARABLE
Meaning
No further information.
MARM264
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM264 INSTALLATION OF INSTALLATION ITEMS INCORRECT. MACRO CALL 'GETINSV' FAILED
Meaning
The macro call 'GETINSV' failed. Possible reasons:
- The MAREN installation was done illegaly without using IMON.
- The MAREN version is not recognizable or not supported.
Response
Please check the MAREN installation.
MARM265
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM265 WARNINGS FOUND DURING CHECK OF MAREN INSTALLATION ITEMS. MARENADM PROCESSING CONTINUES
Meaning
Some warnings are found during check of MAREN installation items.
See previous messages. Please check the states and attributes of
these installation items. The processing of MARENADM continues.
Due to the previous warnings, it is not sure, that all functions
will work correctly.
MARM266
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM266 INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' IS NO PERMANENT FILE
Meaning
No further information.
MARM267
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM267 WRONG FCB-TYPE FOR INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)'
Meaning
The access method in the FCB of installation item '(&00)' with logical
logical Id '(&01)' is wrong. This may lead to problems when this file
is to be opened later on.
Response
Please check and correct the FCB-type for the mentioned installation
item.
MARM268
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM268 THE INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' IS NOT LOCATED ON A PUBLIC DISK
Meaning
No further information.
MARM269
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM269 INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' IS NOT FOUND ON THE EXPECTED USER ID
Meaning
No further information.
MARM270
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM270 FSTAT MACRO CALL FOR INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' REPORTS DMS-ERROR 'DMS(&02)'
Meaning
No further information.
MARM271
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM271 INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' IS INSTALLED UNDER A FOREIGN USER ID AND NOT SHARABLE
Meaning
No further information.
MARM272
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM272 INSTALLATION ITEM '(&00)' FOR LOGICAL ID '(&01)' HAS ATTRIBUTE 'READ ONLY'
Meaning
The installation item '(&00)' has the attribute 'ACCESS=READ', but
must have the attribute 'ACCESS=WRITE'. This message would also be
displayed, if the installation item is protected by a Read Password
(not allowed).
Response
Please set the attribute 'ACCESS' to 'WRITE' for the
mentioned installation item and reset (if existing) a file
protection by Read Password.
MARM273
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM273 THE INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' IS NOT WRITE-PROTECTED
Meaning
The installation item '(&00)' ought to be write-protected, but is
not. The MAREN processing can be continued without restrictions,
but there is no protection against overwriting or erasure of the
installation item.
Response
Please set the attribute 'ACCESS' to 'READ' or define a
write-password in order to protect the installation item against
overwriting or erasure.
MARM274
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM274 NON-NUMERIC FILE-SEQUENCE-NUMBER (FSEQ) DETECTED FOR VOLUME '(&00)'
Meaning
For the volume '(&00)' a MAREN-Catalog-Record is detected with an
invalid, non-numeric File-sequence-number (FSEQ). The value C'0000'
is illegal too. Maybe this MAREN catalog entry has been generated
or overwritten physically or with the aid of other programs. This
MAREN catalog entry cannot be processed correctly.
Response
Please inspect the entries for the mentioned VSN in the MAREN
catalog and the MAREN logging file by using the MARENADM
statement //SHOW-MAREN-FILE .
MARM275
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM275 SPECIFIED FILE WITH FSEQ '(&01)' IS NOT FIRST ONE ON VOLUME '(&00)'. STATEMENT NOT PROCESSED
Meaning
The file is a part of a MF/MV-set and is not the first file on one of
these volumes.
(&00) Volume serial number (VSN)
(&01) File sequence number (FSEQ)
MARM276
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM276 'CHANGE-LOGGING-FILE' FAILED FOR HOST '(&00)', MESSAGE NUMBER '(&01)'
Meaning
No further information.
Response
Enter /HELP-MSG (&01) in system mode.
MARM277
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM277 'CLOSE-MAREN-FILES' FAILED FOR HOST '(&00)', RETFLAG '(&01)'
Meaning
For meaning of RETFLAGs see MAREN manual.
MARM278
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM278 'OPEN-MAREN-FILES' FAILED FOR HOST '(&00)', RETFLAG '(&01)'
Meaning
For meaning of RETFLAGs see MAREN manual.
MARM279
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM279 MAREN LOGGING FILE '(&00)' OPENED FOR HOST '(&01)'
Meaning
The specified file has been opened as the new logging file for
the MAREN-System on the mentioned host.
MARM280
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM280 FILE '(&00)' HAS INVALID FORMAT. CHANGE-LOGGING-FILE FOR HOST '(&01)' FAILED
Meaning
The specified file has some file attributes which are illegal
for a MAREN logging file.
Possible reasons:
- ACCESS-METHOD not ISAM
- KEY-LENGTH not 32
- KEY-POSITION not 5.
- File is write-protected.
(&00): name of specified MAREN logging file.
Response
Repeat the statement using a different file name.
MARM281
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM281 MAREN CATALOG OPENED FOR HOST '(&00)'. CATALOG LOCK RESET
Meaning
No further information.
MARM282
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM282 MAREN CATALOG FILE FOR HOST '(&00)' CLOSED
Meaning
No further information.
MARM283
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM283 MAREN CONTROL PROGRAM MARENCP FOR HOST '(&00)' TERMINATED
Meaning
No further information.
MARM284
Destination: CONSOLE Routing code: T Weight: 30
Warranty : NO
MARM284 MARENUCP TERMINATED FOR HOST '(&00)'
Meaning
Automatic free tape allocation (MARENUCP) for host '(&00)' is
terminated.
MARM285
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM285 TERMINATION OF MARENUCP FOR HOST '(&00)' REJECTED WITH RETFLAG '(&01)'
Meaning
For meaning of RETFLAGs see MAREN manual.
MARM286
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM286 TERMINATION OF CONTROL PROGRAM MARENCP FOR HOST '(&00)' REJECTED WITH RETFLAG '(&01)'
Meaning
For meaning of RETFLAGs see MAREN manual.
MARM287
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM287 VOLUME '(&00)' BELONGS TO A DIFFERENT VOLUME-GROUP
Meaning
The volume '(&00)' does not belong to the volume-group which was
specified in the statement. So this volume is omitted by the
processing of the statement and its attributes remain unchanged.
The statement can be processed either partially only or not at all.
MARM288
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM288 THE INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' OUGHT TO BE NOT SHARABLE, BUT IS CURRENTLY SHARABLE
Meaning
No further information.
MARM289
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM289 INSTALLATION ITEM '(&00)' WITH LOGICAL ID '(&01)' SHOULD HAVE THE ATTRIBUTE 'SHARE=SPECIAL'
Meaning
No further information.
MARM290
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM290 VOLUMES FOR VOLUME-GROUP '(&00)':
Meaning
At least one volume is found belonging to the VOLUME-GROUP '(&00)'.
Within the following lines the VSNs of all volumes belonging to
this VOLUME-GROUP will be listed.
MARM291
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM291 (&00) VOLUMES FOUND FOR VOLUME-GROUP '(&01)'
Meaning
No further information.
MARM292
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM292 A VOLUME WITH THE SAME VSN '(&00)' DOES ALREADY EXIST AT THE SAME ROBOTER LOCATION '(&01)'. PLEASE REMOVE THE ALREADY EXISTING VOLUME FROM THE ROBOTER
Meaning
A volume with the same VSN '(&00)' does already exist at the same
roboter location '(&01)'.
In the MAREN catalog the already existing volume is migrated and the
new private volume is added. Processing of the statement continues.
Response
Please remove the existing volume from the roboter before you insert
the new private volume into the roboter.
MARM293
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM293 TARGET VOLUME-GROUPS MUST NOT CONTAIN WILDCARD SYMBOLS
Meaning
Wildcard symbols within Volume-Group specifications are only allowed
for selection purposes.
MARM294
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM294 THE FUNCTION 'ELIMINATE' CANNOT BE PROCESSED BECAUSE THE FILE IS OPENED IN READ-ONLY MODE
Meaning
The function 'ELIMINATE' of the MARENADM statement
'SHOW-MAREN-FILE' cannot be processed because the file is opened
for read only.
Response
- Please enter 'END'. Then the statement SHOW-MAREN-FILE
terminates and the file will be closed.
- Please set the file attribute 'ACCESS' to 'WRITE'.
- Afterwards you can repeat the MARENADM statement
'SHOW-MAREN-FILE'.
MARM295
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM295 VOLUME '(&00)' WITH FSEQ '(&01)' FOR FILE '(&02)' ALREADY PROCESSED
Meaning
In the TSOSCAT several entries are found for VSN '(&00)' and FSEQ
'(&01)'. So the entry for file '(&02)' cannot be transferred to
the MAREN catalog.
MARM296
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM296 SPECIFIED HOST UNKNOWN. 'HOST=*OWN' ASSUMED
Meaning
No further information.
MARM297
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM297 (&00) VOLUMES WRITTEN TO THE INIT-FILE
Meaning
No further information.
MARM298
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM298 THE PARAMETER 'LAYOUT' WILL BE IGNORED, BECAUSE 'COMMA-SEPARATED-VALUE' HAS BEEN SPECIFIED
Meaning
Since 'COMMA-SEPARATED-VALUE' is specified, the output layout is
already defined. So the specification of the parameter 'LAYOUT' is
superflouos and will be ignored.
MARM299
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM299 FILE '(&00)' CANNOT BE USED AS MAREN LOGGING FILE - INVALID FORMAT
Meaning
The specified file has some file attributes which illegal for a
MAREN logging file.
Possible reasons:
- ACCESS-METHOD not ISAM
- KEY-LENGTH not 32
- KEY-POSITION not 5 .
MARM310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM310 NO MAILING ADDRESS FOUND. FILE '(&00)' CANNOT BE SENT
MARM311
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM311 SYNTAX ERROR IN MAILING ADDRESS. FILE '(&00)' CANNOT BE SENT
MARM312
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM312 THE PARAMETER 'DIRECTORY-ON-VOLUME=*YES' HAS BEEN SPECIFIED IN CONFLICT WITH A FURTHER PARAMETER
Meaning
The parameter 'DIRECTORY-ON-VOLUME=*YES' must not be used in
combination with 'DIRECTORY-NAME=*NONE' or 'VOLUME-STATUS=*FREE'.
On the other hand, this parameter must be combined either with
'FILE-NAME=*ALL' or 'FILE-NAME=*NONE'.
MARM313
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM313 SPECIFIED USER-ID '(&00)' UNKNOWN. THE OUTPUT FILE CANNOT BE SENT VIA E-MAIL
Meaning
The specified user-id to which the output file is to be sent, is
unknown. So no e-mail address can be found.
MARM314
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM314 NO E-MAIL-ADDRESS IS ASSIGNED TO THE USER-ID '(&00)'. THE SPECIFIED OUTPUT-FILE CANNOT BE SENT
Meaning
The specified user-id exists, but has no e-mail address. So the
specified output file cannot be sent.
MARM315
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM315 ERROR WITH MAINCODE '(&00)' DURING SENDING OF FILE '(&01)' VIA E-MAIL.
Meaning
Some of the maincodes do correspond to DMS errorcodes. So it may
be helpfull to enter /HELP DMS(&00) in system mode.
MARM316
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM316 THE FUNCTION 'MAIL-SERVICE' IS NOT SUPPORTED BY THE USED BS2000 VERSION
MARM317
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM317 OUTPUT FILE EMPTY - NO SEND VIA E-MAIL
Meaning
Since none of the MAREN catalog entries matches the specified
selection criteria, the output file stays empty and is therefore
not sent via E-mail.
MARM318
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM318 SORT ERROR 'SRT1(&00)' OCCURED DURING MERGE OF MAREN LOGGING FILES FOR THE MARENADM STATEMENT 'UPDATE-MAREN-CATALOG'. IN SYSTEM MODE: /HELP SRT1(&00)
MARM319
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM319 MERGED MAREN LOGGING FILE '(&00)' CREATED WITH WARNING 'SRT1(&01)'. IN SYSTEM MODE: /HELP SRT1(&01)
Meaning
The merged MAREN logging file has been created from the specified
MAREN logging files, but SORT has reported a warning. The statement
//UPDATE-MAREN-CATALOG will be aborted, since it is not certain,
whether it can be continued successfully and whether the MAREN
catalog content would be updated correctly. If some records are
missing within the created MAREN logging file, this may cause an
incorrect content of the MAREN catalog.
Response
- Please enter in /HELP SRT1(&01) in system mode.
- Please check the created and the specified MAREN logging files.
The completeness of the created MAREN logging file is very
important.
- If the files are correct, you can repeat the MARENADM
statement UPDATE-MAREN-CATALOG with the created MAREN logging
file.
- If some of the specified MAREN logging files could not be read,
these files can be specified again together with the merged
MAREN logging file when the MARENADM statement
//UPDATE-MAREN-CATALOG is repeated. Empty MAREN logging files
can be ignored.
MARM320
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM320 MERGED MAREN LOGGING FILE '(&00)' SUCCESSFULLY CREATED
MARM321
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM321 FILE '(&00)' EMPTY -- IGNORED
MARM322
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM322 FILE '(&00)' NOT FOUND
MARM323
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM323 FILE '(&00)' IS NO MAREN LOGGING FILE
MARM324
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM324 NO SUITABLE MAREN LOGGING FILE FOUND. MAREN CATALOG REMAINS UNCHANGED
MARM325
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM325 PROCESSING OF MARENADM STATEMENT '//UPDATE-MAREN-CATALOG' CONTINUES IN SPITE OF SORT WARNING 'SRT1(&00)', LOGGING FILE '(&01)'
MARM326
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM326 USER IDENTIFICATION FOR SENDING E-MAIL NOT SPECIFIED
MARM327
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM327 MAIL SENDING ORDER FOR FILE '(&00)' ACCEPTED
MARM328
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM328 MAIL-SERVICE NOT AVAILABLE
MARM329
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM329 OUTPUT FILE '(&00)' NOT ACCESSIBLE FOR MAIL-SERVICE, PROBABLY LOCKED
MARM330
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM330 OUTPUT FILE '(&00)' DOES NOT CONTAIN ANY MAREN CATALOG ENTRY. FILE NOT SENT
Meaning
The MAIL-Service does not allow sending of empty files.
MARM331
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM331 VOLUME '(&00)' IS ALREADY IN MAREN CATALOG AND HAS DIFFERENT '(&01)'
MARM332
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM332 LINKAGE ERROR: THE HSMS REQUEST COULD NOT BE PROCESSED
MARM333
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM333 INVALID INPUT-FILE SPECIFIED
MARM334
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM334 VALUES FOR VOLUME, SFID, ETC. CANNOT BE GATHERED FROM HSMS; THIS FUNCTION IS NOT SUPPORTED IN THIS HSMS VERSION, OR ARCHIVE NAME UNKNOWN (POSSIBLY FALSE)
MARM335
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM335 OTHER HSMS ERRORS
MARM336
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM336 NO TAPE MATCHING THE CRITERIA WAS FOUND
MARM337
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM337 STATEMENT //UPDATE-MAREN-CATALOG HAS NOT BEEN EXECUTED
MARM338
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM338 MANDATORY DIRECTORY NAME COULD NOT BE DETERMINED
MARM340
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM340 PARAMETER RECORD IN MAREN CATALOG CONTAINS A PASSWORD. SO //COPY-VOLUME-CATALOG IS RESTRICTED TO TSOS
MARM341
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM341 HOST RECORD FOR HOST '(&00)' IN MAREN CATALOG CONTAINS A PASSWORD. SO //COPY-VOLUME-CATALOG IS RESTRICTED TO TSOS
MARM342
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM342 SEARCH FOR HOSTS NOT SUCCESSFULL
Meaning
Probably internal MAREN error.
MARM343
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM343 STATEMENT PROCESSING CANCELLED - LAST MESSAGE NUMBER WAS: '(&00)'
MARM344
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM344 STATEMENT PROCESSING CANCELLED
MARM345
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM345 COPY OF MAREN CATALOG ERASED
Meaning
Due to an error during copying the MAREN catalog, the copy file was
incomplete and errorneous or empty. The copy file has been erased.
See the preceding messages.
MARM346
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM346 THE MAREN PARAMETER 'EXPORT-RECEIPT' HAS THE VALUE '(&00)'. SO NO EXPORT-RECEIPTS CAN BE SENT VIA E-MAIL
Meaning
Export-receipts can only be sent via E-mail if the MAREN parameter
'EXPORT-RECEIPT' has either the value '*FILE' or '*PRINTER...' .
Processing of the statement //EXPORT-VOLUME continues.
Response
If the sending of export receipts via E-mail during the next
//EXPORT-VOLUME statements is desired, please modify the value of
the MAREN parameter 'EXPORT-RECEIPT' with the MARENADM statement
//MODIFY-MAREN-PARAMETERS accordingly.
MARM347
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARM347 SENDING OF AN E-MAIL FAILED DUE TO A REASON WHICH IS INDEPENDENT FROM FILE. PROCESSING OF THE STATEMENT CONTINUES WITHOUT E-MAILS
Meaning
For the error reason see preceding messages.
In order to avoid the repetition of the error, no further E-mails
will be sent during the processing of the current statement.
MARUPA0
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUPA0 ROUTING CODE OF '(&00)' NOT ASSIGNED
Meaning
The routing code of the command or message is not assigned to the UCON
user ID.
(&00): command or message.
Response
See the MAREN Administrator Guide, chapter MARENUCP ('Preliminary work').
MARUPA1
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUPA1 RESPONSE TO COMMAND '/CHECK-TAPE' NOT RECEIVED
Meaning
MARENUCP did not receive any response to the command.
Possible reasons:
- routing code 'T' not assigned to UCON-USER-ID
- tape monitor (TM) overloaded.
MARUP00
Destination: CONSOLE Routing code: T Weight: 30
Warranty : NO
MARUP00 MARENUCP VERSION (&00) STARTED
MARUP01
Destination: CONSOLE Routing code: T Weight: 30
Warranty : NO
MARUP01 MARENUCP TERMINATED NORMALLY
Meaning
Automatic free tape allocation is deactivated.
Response
Start MARENUCP again, if necessary.
MARUP02
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP02 MARENUCP OR OTHER PROGRAM USING UCON APPLICATION '(&00)' ALREADY ACTIVE
Meaning
MARENUCP has already been started or another UCON application is
using the UCON user ID assigned to MARENUCP.
(&00): UCON user ID.
Response
If possible, terminate the other UCON application and restart MARENUCP.
MARUP03
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MARUP03 MARENUCP cannot run under this USER-ID
Meaning
Possible reasons:
- The Operator-role, which is defined at the host specific
parameters, is not assigned to this USER-ID.
- This USER-ID does not own the privilege 'TAPE-ADMINISTRATION'.
MARUP11
Destination: CONSOLE Routing code: T Weight: 30
Warranty : NO
MARUP11 MARENUCP FOR HOST '(&00)' TERMINATED
Meaning
Automatic free tape allocation (MARENUCP) for host '(&00)' is
terminated.
MARUP30
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP30 REQUEST REJECTED BY MARENUCP. REQUEST MUST BE HANDLED BY OPERATOR
MARUP31
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP31 MARENUCP NOT LOADED OR DIFFERENT VERSIONS OF MARENUCP AND MAREN SUBSYSTEM INSTALLED; REPLY (Y=MARENUCP HAS BEEN LOADED; N=REJECT TAPE REQUEST; UCPN=MARENUCP NOT INSTALLED)
Meaning
This message appears if a free tape is requested but MARENUCP is either
not loaded or if the loaded versions of MARENUCP and of the MAREN
subsystem are not compatible.
Response
The MAREN administrator has to start a correct version of MARENUCP.
Afterwards MARENUCP will automatically respond to this message with 'Y'.
If for any reason MARENUCP is not started, the message can also be
answered by the operator in one of the following ways:
N: the tape request will be rejected
UCPN: MARENUCP is not active.
All tape requests will be handled by the operator.
If MARENUCP is to be started later, then the MAREN subsystem
also has to be reloaded.
MARUP32
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARUP32 SPECIFIED FILE DOES NOT EXIST
MARUP40
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP40 MOUNT FREE VOLUME '(&00)' ON DEVICE '(&01)' FOR TASK '(&02)'? REPLY (Y=YES; N=NO)
Meaning
Request to mount a free tape managed by MAREN.
(&00): requested volume type
(&01): recommended device
(&02): task to process the tape.
Response
A free tape has to be mounted. Any free device can be used, i.e. the
recommendation is not mandatory.
The device must be assigned to the location of the volume
(command /ADD-DEVICE-DEPOT).
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP41
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP41 MOUNT FREE VOLUME '(&00)' FROM NUMBER RANGE '(&01)-(&02)' ON DEVICE '(&03)' FOR TASK '(&04)'? REPLY (Y=YES; N=NO)
Meaning
Request to mount a free tape from the specified number range managed by
MAREN.
(&00): requested volume type
(&01): beginning of the number range
(&02): end of the number range
(&03): recommended device
(&04): task to process the tape.
Response
Mount a free tape. Any free device can be used, i.e. the recommendation
is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP42
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP42 MOUNT ANY FREE VOLUME '(&00)' WITH 'FREE-POOL=(&01)' FOR TASK '(&03)' ON DEVICE '(&02)'? REPLY (Y=YES; N=NO)
Meaning
(&00): requested volume type
(&01): free tape pool
(&02): recommended device
(&03): task to process the tape.
Response
Any free device can be used, i.e. the recommendation is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP43
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP43 MOUNT ANY FREE VOLUME '(&00)' WITH 'FREE-POOL=(&01)' FROM NUMBER RANGE '(&02)-(&03)' FOR TASK '(&05)' ON DEVICE '(&04)'? REPLY (Y=YES; N=NO)
Meaning
(&00): requested volume type
(&01): free tape pool
(&02): beginning of the number range
(&03): end of the number range
(&04): recommended device
(&05): task to process the tape.
Response
Any free device can be used, i.e. the recommendation is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP44
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP44 MOUNT VOLUME '(&00)' ON DEVICE '(&01)' FOR TASK '(&02)' FROM '(&03)'? REPLY (Y=YES; N=NO)
Meaning
(&00): volume serial number (VSN) of the requested volume
(&01): recommended device
(&02): TSN of the requesting task
(&03): name of the robot.
Response
The tape will be mounted by a robot.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP45
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP45 MOUNT VOLUME '(&00)' OF TYPE '(&01)' FOR TASK '(&03)' ON DEVICE '(&02)'? REPLY (Y=YES; N=NO)
Meaning
(&00): volume serial number (VSN) of the recommended volume
(&01): requested volume type
(&02): recommended device
(&03): task to process the tape.
Response
The recommended tape or any other free tape has to be mounted.
Any free device can be used, i.e. the recommended one is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP46
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP46 MOUNT VOLUME '(&00)' OF TYPE '(&01)' FROM NUMBER RANGE '(&04)-(&05)' FOR TASK '(&03)' ON DEVICE '(&02)'? REPLY (Y=YES; N=NO)
Meaning
(&00): volume serial number (VSN) of the recommended volume
(&01): requested volume type
(&02): recommended device
(&03): task to process the tape
(&04): beginning of the number range
(&05): end of the number range.
Response
The recommended tape or any other free tape from the specified number
range has to be mounted.
Any free device can be used, i.e. the recommended one is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP47
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP47 MOUNT VOLUME '(&00)' OF TYPE '(&01)' WITH 'FREE-POOL=(&04)' FOR TASK '(&03)' ON DEVICE '(&02)'? REPLY (Y=YES; N=NO)
Meaning
(&00): volume serial number (VSN) of the recommended volume
(&01): requested volume type
(&02): recommended device
(&03): task to process the tape
(&04): free tape pool
Response
The recommended tape or any other free tape from the free tape pool
has to be mounted.
Any free device can be used, i.e. the recommended one is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP48
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP48 MOUNT VOLUME '(&00)' OF TYPE '(&01)' WITH 'FREE-POOL=(&04)' FROM NUMBER RANGE '(&05)-(&06)' FOR TASK '(&03)' ON DEVICE '(&02)'? REPLY (Y=YES; N=NO)
Meaning
(&00): volume serial number (VSN) of the recommended volume
(&01): requested volume type
(&02): recommended device
(&03): task to process the tape
(&04): free tape pool
(&05): beginning of the number range
(&06): end of the number range.
Response
The recommended tape or any other free tape from the specified
free tape pool and from the specified number range has to be mounted.
Any free device can be used, i.e. the recommended one is not mandatory.
The message will be answered automatically by MARENUCP when an
appropriate tape has been mounted.
In addition, the message can also be answered by the operator in one of
the following ways:
Y: a tape has been mounted
N: the tape request will be rejected.
MARUP80
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP80 NO ATTACHED TAPE DEVICES ASSIGNED TO LOCATION '(&00)'
Meaning
In the device management no attached tape devices are assigned to the
location '(&00)' defined in MAREN. For this location no tape devices
can be reserved.
Response
Please assign tape devices to this location by the commands
ADD-DEVICE-DEPOT and ATTACH-DEVICE .
MARUP81
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP81 MARENUCP TERMINATED ABNORMALLY
Meaning
Due to an error the automatic allocation of free tapes with the aid of
the MARENUCP program has been deactivated.
Response
Analyze and correct the error and then start MARENUCP again.
MARUP82
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP82 INTERNAL MARENUCP ERROR. MARENUCP TASK TERMINATED WITH DUMP
Response
Contact the MAREN administrator.
Restart the MARENUCP task, if possible.
MARUP83
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP83 INTERNAL MAREN ERROR
Meaning
The following messages contain further diagnostic information.
Response
Contact the MAREN administrator.
MARUP84
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP84 DMS ERROR '(&00)' ON FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
During execution of MARENUCP a DMS error occurred.
For more detailed information about the DMS error code enter
/HELP-MSG in system mode.
Response
Correct the error and then start MARENUCP again.
MARUP85
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP85 OPERATOR INITIATES TERMINATION OF MARENUCP
Meaning
The error reported in message MAR0085 concerned MARENUCP. Depending on
the response of the operator to MAR0085, MARENUCP is terminated, thus
deactivating automatic free tape allocation.
Response
Correct the error reported by message MAR0085 and start MARENUCP again.
In the meantime
- deal with unresolved messages NKVT013 and DMS0591, being sure to refer
to the notes in the manual in the section on special MARENUCP
situations.
The entries of the used volumes have to be modified specially by the
MAREN administrator in the MAREN catalog.
or
- wait until the error is eliminated automatically.
(After startup, MARENUCP handles outstanding messages automatically.)
MARUP86
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP86 CATALOG ACCESS ERROR '(&00)'
Meaning
While accessing the MAREN catalog the error (&00) occurred.
(&00): error byte (RETFLAG) of MARENCP.
Response
Contact the MAREN administrator.
MARUP87
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP87 INVALID USER ID: MARENUCP RESTRICTED TO SYSTEM ADMINISTRATOR
Response
Load MARENUCP under the system administrator ID.
MARUP88
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP88 BS2000 VERSION '(&00)' NOT SUPPORTED. MARENUCP TASK ABORTED
Meaning
MARENUCP has been started using an operating system version other than the
one permitted in the program. In this case an error-free program run
cannot be guaranteed.
Response
Check the version number of the MARENUCP program.
MARUP89
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP89 ADMINISTRATOR'S EXIT ROUTINE FOR MAREN INVALID. ERROR IN FIELD '(&00)'. MARENUCP TERMINATED WITH DUMP
Meaning
When the returned catalog entry was checked, the contents of the specified
field were found to be illegal.
(&00): name of the field (see the DSECT of the catalog entry).
Response
Analyze and correct the error and then start MARENUCP again.
MARUP90
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MARUP90 INVALID TEXT IN /INFORM-PROGRAM COMMAND. REPLY (H=TERMINATE MARENUCP; H, KILL=ABORT MARENUCP; tsn.N=REJECT REQUEST)
Meaning
The text transferred to MARENUCP in the /INFORM-PROGRAM command is
invalid.
Response
H : terminate MARENUCP
H,KILL: abort MARENUCP (consequences are unpredictable)
tsn.N : reject the request for the task with the specified TSN.
MARUP91
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP91 INVALID TSN '(&00)' IN /INFORM-PRROGRAM COMMAND
Meaning
The TSN transferred to MARENUCP in the /INFORM-PROGRAM command is
incorrectly formatted or does not belong to a task currently being
processed by MARENUCP.
(&00): invalid TSN.
Response
Check the TSN by means of the command /STA MSG and enter the
/INFORM-PROGRAM command again with the correct TSN.
MARUP92
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARUP92 VOLUME REQUEST REJECTED BY MARENUCP
Meaning
The request for tapes was rejected by automatic free tape allocation.
The reason can be taken from the previous message.
MARUP93
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARUP93 VOLUME REQUEST REJECTED BY OPERATOR
Meaning
The request for tapes was rejected by automatic free tape allocation
at the request of the operator.
MARUP94
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP94 ILLEGAL OPERATOR ACTION FOR TASK '(&00)'
Meaning
The operator mistakenly answered a tape request which should have been
handled by MARENUCP. This makes it impossible for MARENUCP to continue
processing the request. In some cases, MARENUCP is terminated
abnormally.
(&00): TSN of the task in question.
Response
The following messages, e.g. DMS0DFB, must be handled by the operator
whenever possible. If MARENUCP is terminated abnormally, it has to be
started again.
MARUP95
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MARUP95 NO DEVICE AVAILABLE FOR VOLUME TYPE '(&00)'
MARUP96
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP96 NO OUTSTANDING REQUESTS FOR MARENUCP
Meaning
All requests to MARENUCP have been processed.
MARUP97
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP97 NO FREE VOLUME OF TYPE '(&01)' EXISTS WITH 'FREE-POOL=(&02)' IN NUMBER RANGE '(&03)-(&04)' FOR TSN '(&00)'
Meaning
At least one free tape with the specified attributes is missing.
The request from the task cannot be processed.
This message will be repeated until a suitable reply or reaction is
received.
(&00): task to process the tape
(&01): requested volume type
(&02): free tape pool
(&03): beginning of the number range
(&04): end of the number range.
Response
Possible reactions:
- the MAREN administrator makes suitable free tapes available.
- the operator cancels the tape request with 'tsn.N'.
MARUP98
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP98 NO FREE VOLUME OF TYPE '(&01)' EXISTS WITH 'FREE-POOL=(&02)' IN NUMBER RANGE '(&03)-(&04)', HOME LOCATION '(&05)' FOR TSN '(&00)'
Meaning
At least one free tape with the specified attributes is missing or the
requested free volume serial numbers are outside of the range managed
by MAREN.
The request from the task cannot be processed.
This message will be repeated until a suitable reply or reaction is
received.
(&00): task to process the tape
(&01): requested volume type
(&02): free tape pool
(&03): beginning of the number range
(&04): end of the number range
(&05): location name (HOME-LOCATION) of the robot.
Response
Possible reactions:
- the MAREN administrator makes suitable free tapes available.
- the operator cancels the tape request with 'tsn.N'.
MARUP99
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MARUP99 ERROR DURING INITIALIZATION OF VOLUME '(&00)'
Meaning
Possible reasons:
- no device available
- device error
- message NKVT013 has been rejected by the operator with 'tsn.N'.
Processing continues.
Response
The tape has to be to initialized with the aid of the INIT routine, if
necessary.
MAR0005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR0005 The specified KEY-ID has been already entered for the specified volume
MAR0010
Destination: CONSOLE Routing code: T Weight: 70
Warranty : NO
MAR0010 VOLUME '(&00)' ADDED TO THE MAREN CATALOG DURING AN INSERT PROCESSING AT LOCATION '(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): location name.
MAR0051
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0051 SUBSYSTEM TLS NOT AVAILABLE
Meaning
The subsystem TLS is either not loaded or not available.
Response
Contact the MAREN administrator.
MAR0052
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0052 TLS not active or Fast-Ready categories not supported in TLS subsystem
Meaning
The TLS subsystem is not installed or installed version is previous to
V1.2 or not available.
Response
Contact the MAREN administrator.
MAR0053
Destination: USER-TASK, CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0053 VTS and/or Fast-Ready categories not supported in MAREN subsystem
Meaning
VTS and/or Fast-Ready optional REPs not set for MAREN subsystem (TPR).
Response
Contact the MAREN administrator.
MAR0061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR0061 CONTROL PROGRAM MARENCP NOT LOADED ON LOCAL HOST
Meaning
No accesses to the MAREN catalog are possible.
Response
Contact the MAREN administrator.
MAR0062
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR0062 CONTROL PROGRAM MARENCP NOT LOADED ON HOST '(&00)'
Meaning
No further information.
MAR0064
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR0064 MAREN PASSWORD NOT SPECIFIED OR USER ID HAS NO PRIVILEGE FOR TAPE ADMINISTRATION
Meaning
For the desired function specification of the MAREN password or the
system privilege for tape administration is mandatory.
Response
Enter the MAREN password by means of the /ADD-PASSWORD command, then
invoke the program again or contact the system administrator.
MAR0065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR0065 MAREN ALL-DOMAIN PASSWORD NOT SPECIFIED OR HOST IS NOT ALL-DOMAIN AUTHORIZED
Meaning
For the desired function specification of the MAREN ALL-DOMAIN
password is mandatory and the host must be authorized for
ALL-DOMAIN specification
Response
Enter the MAREN ALL-DOMAIN password by means of the /ADD-PASSWORD
command, then invoke the program or statement MODIFY-ADMINISTRATION-SCOPE
again
MAR0070
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0070 MAREN SUBSYSTEM LOADED INCORRECTLY
Meaning
An error occurred while loading the subsystem by means of a DSSM statement
or during the dynamic linkage of single modules with the aid of autolink.
Now some parts of the subsystem exist more than once.
Response
Check the subsystem declarations.
MAR0081
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR0081 MAREN CATALOG TEMPORARILY LOCKED
Meaning
On account of urgent repair work, the MAREN administrator temporarily
locked the MAREN catalog. For this reason, no access to the MAREN catalog
will be possible for a short time.
Response
Wait until the MAREN administrator has reset the lock on the MAREN
catalog.
MAR0082
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0082 INVALID MAREN TRANSACTION INDICATOR X'(&00)'
Meaning
The internal MAREN facility for synchronization of the MAREN transaction
has recognized an invalid transaction indicator. The invalid indicator is
logged to SYSOUT and to console and then corrected by the MAREN subsystem,
so that all tasks may continue normally.
Response
Contact the MAREN administrator.
MAR0083
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR0083 WAITING TIME RUNOUT FOR MAREN TRANSACTION ACCEPTANCE
Meaning
The set waiting time for the acceptance of a MAREN transaction has
expired, without the MAREN control task having accepted the
transaction.
Response
Try to repeat the function which has not been executed later on or
contact the MAREN administrator.
MAR0084
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR0084 WAITING TIME RUNOUT FOR MAREN TRANSACTION PROCESSING
Meaning
The set waiting time for the processing of a MAREN transaction has
expired, although the transaction has not been completed.
Response
Try to repeat the interrupted function later on or contact the MAREN
administrator.
MAR0085
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MAR0085 DUE TO MAREN ERROR '(&00)' MAREN TRANSACTION FAILED FOR BATCH JOB NAME '(&01)', USER ID '(&02)'. REPLY (0=ERROR EXIT; 1=RETRY; 2=CONTINUE WITHOUT MAREN)
Meaning
Possible reasons:
- MAREN catalog defective
- waiting time expired.
For more detailed information about the MAREN error code enter /HELP-MSG
in System mode or see the "MAREN" manual.
(&00): MAREN message code for the MAREN error
(&01): name of the job
(&02): user ID.
Response
0: Error exit. The loaded program branches via the exit EXLST or the
current job branches to the next /SET-JOB-STEP command.
1: The last MAREN transaction is repeated.
2: Processing continues without the MAREN transaction.
If the MAREN error has not yet been eliminated, the
MAREN subsystem should be deactivated before continuing.
Or: Start MARENCP again. Then the question will be withdrawn
by the MAREN subsystem and the task continues.
MAR0086
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MAR0086 DUE TO MAREN ERROR '(&00)' MAREN TRANSACTION FAILED FOR BATCH JOB NAME '(&01)', USER ID '(&02)'. REPLY (1=RETRY; 2=CONTINUE WITHOUT MAREN)
Meaning
Possible reasons:
- MAREN catalog defective
- waiting time expired.
For more detailed information about the MAREN error code enter /HELP-MSG
in system mode or see the "MAREN" manual.
(&00): message code of the MAREN error
(&01): name of the job
(&02): user ID.
Response
1: The last MAREN transaction is repeated.
2: Processing continues without the MAREN transaction.
If the reported MAREN error has not yet been eliminated,
the MAREN subsystem should be deactivated before continuing.
If processing is not to be continued, this can only be achieved
by aborting the batch job by means of the /CANCEL-JOB command.
MAR0087
Destination: CONSOLE Routing code: T Weight: 99
Warranty : NO
MAR0087 DMS ERROR '(&00)' DURING ACCESS TO MAREN CATALOG. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
While executing a batch job, a DMS error occurred when accessing the
MAREN catalog. This message is output to the console.
Immediately thereafter the operator is asked what is to happen to the
batch job concerned.
For more detailed information about the DMS error code enter
/HELP-MSG in system mode.
Response
Issue an appropriate response to the next console message MAR0085 or
MAR0086 and contact the MAREN administrator.
MAR0088
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR0088 Device management error on function '(&00)' - macro '(&01)' returns '(&02)'
Meaning
Error on calling the specified device management macro
during processing of allocation/release of device for
scratch tape initialization.
(&00): Internal function call
(&01): Device management macro
(&02): Error code
Response
NONE.
MAR0089
Destination: CONSOLE Routing code: T Weight: 98
Warranty : NO
MAR0089 MAREN TRANSACTION FAILED. RETRY STARTED
Meaning
Due to a problem in the control program MARENCP, a request did not
terminate successfully. A retry is performed to send the request to
MARENCP again.
MAR0090
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR0090 DUE TO MAREN ERROR '(&00)' MAREN TRANSACTION FAILED. DO YOU WANT TO RETRY THE TRANSACTION ? (Y=RETRY; N=ABORT)
Meaning
Possible reasons:
- MAREN catalog defective
- waiting time elapsesed.
- MARENCP not loaded
- MAREN-CATALOG closed (MARENADM: show-maren-status)
For more detailed information about the MAREN error code enter
/HELP-MSG in System mode or see the "MAREN" manual.
(&00): MAREN message code for the MAREN error.
Response
N: Error exit. The loaded program branches via the exit EXLST or the
current job branches to the next /SET-JOB-STEP command.
Y: The last MAREN transaction is to be repeated.
MAR4013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4013 VOLUME WAS NOT CLOSED PROPERLY
Meaning
The CLOSE-INDICATOR is not set to CLOSED in the MAREN catalog entry.
Response
Try to repeat the interrupted function later on or contact the MAREN
administrator.
MAR4101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4101 VOLUME '(&00)' DOES NOT EXIST IN MAREN CATALOG
Meaning
There exists no MAREN catalog entry for the specified volume.
The requested statement could not be executed.
(&00): volume serial number (VSN).
Response
Check the VSN and repeat the statement after making any necessary
corrections.
MAR4102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4102 DMS ERROR '(&00)' DURING ACCESS TO FILE '(&01)'. IN SYSTEM MODE: /HELP-MSG DMS(&00)
Meaning
The following message MARKZ81 contains further diagnostic information.
For more detailed information about the DMS error code enter
/HELP-MSG in system mode.
Response
Contact the MAREN administrator.
MAR4103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4103 VOLUME '(&00)' EXPORTED
Response
Check the VSN and repeat the statement after making any necessary
corrections.
MAR4104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4104 FILE 'EXPIRATION-DATE' NOT YET REACHED FOR MAREN CATALOG ENTRY '(&00)'/'(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Reset the file expiration date and enter the statement again.
MAR4105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4105 MAREN CATALOG ENTRY '(&00)'/'(&01)' PROTECTED BY PASSWORD
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Enter the correct volume password and then repeat the action.
MAR4107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4107 ONLY READ ACCESS PERMITTED TO FOREIGN VOLUME '(&00)'
Meaning
The specified volume is assigned to a foreign user ID in the
MAREN catalog and has the attribute USER-ACCESS=FOREIGN-READ-ONLY.
Therefore no write access is permitted under a foreign user ID.
(&00): volume serial number (VSN).
Response
Check the VSN and ask the owner to make the volume shareable or use
another volume.
MAR4108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4108 INVALID FILE NAME IN MAREN CATALOG ENTRY '(&00)'/'(&01)'
Meaning
(&00): volume serial number (VSN)
(&01): file sequence number (FSEQ).
Response
Check the specified MAREN catalog entry and repeat the statement after
making any necessary corrections.
MAR4109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4109 VOLUME '(&00)' NOT SHAREABLE
Meaning
Foreign user IDs cannot access the specified volume.
(&00): volume serial number (VSN).
Response
Check the VSN and ask the owner to make the volume shareable, if
necessary.
MAR4110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4110 VOLUME '(&00)' NOT RESERVED IN MAREN CATALOG
Meaning
(&00): volume serial number (VSN).
Response
Check the VSN and repeat the statement after making any necessary
corrections.
MAR4112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4112 VOLUME '(&00)' IN USE BY TSN '(&01)' ON HOST '(&02)'
Meaning
The specified volume is still being used by another task.
(&00): volume serial number (VSN)
(&01): TSN
(&02): host name.
Response
Wait till the specified volume is available again.
MAR4113
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4113 ILLEGAL ACCESS TO ARCHIVE VOLUME '(&00)'
Meaning
Possible reasons:
- the specified volume is contained in the pool of an ARCHIVE directory.
- the specified volume is reserved for ARCHIVE applications in the MAREN
catalog.
Any other access will be rejected.
Response
Check the VSN; use a different volume, if necessary.
MAR4114
Destination: USER-TASK Routing code: Weight:
Warranty : NO
MAR4114 VOLUME '(&00)' HAS WRONG DEVICE-TYPE
Meaning
An encrypted volume can not be accessed without encryption mode or
an non-encrypted volume can not be accessed with encryption mode.
MAR4125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4125 VOLUME '(&00)' NOT LOCALLY AVAILABLE
Meaning
No access to the volume is possible. Possible reasons:
1.) According to the MAREN catalog entry field TEMPORARY-LOCATION
the volume is situated at a remote location.
2.) It is a virtual volume and currently situated outside the
CentricStor.
(&00): volume serial number (VSN).
Response
Relocate the volume to a local location or insert it into CentricStor
and then try to access it again.
MAR4130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4130 ERROR '(&00)' DURING VOLUME SUBSTITUTION
Meaning
The associated volumes for the specified file or file version could not be
located in the MAREN catalog.
Possible values for (&00):
01: no MAREN catalog entries exist with the specified file name.
02: no MAREN catalog entries exist for the specified file version.
03: not all volumes for the requested file version are in the
MAREN catalog (e.g. VOL-SEQ=1 does not exist).
04: at least one volume was not closed correctly
(CLOSE-INDICATOR not set to CLOSED in the MAREN catalog entry).
Response
Check the MAREN catalog entries of the file name and then enter the
command again, if possible.
MAR4140
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
MAR4140 Somes date(s) above 2059-12-31 or under 1960-01-01; The statement is rejected
Meaning
The statement contains date(s) above 2059-12-31 and/or under
1960-01-01 and the MARENCAT is written in format V7. The
recording of this (these) date(s) is then not possible. Please
correct the statement and retry.
Response
Specify dates between 1960-01-01 and 2059-12-31 and retry.
MAR4164
Destination: USER-TASK, CONSOLE Routing code: T Weight: 70
Warranty : NO
MAR4164 PLEASE TRANSPORT VOLUME '(&00)' FROM '(&01)' TO '(&02)'
Meaning
The specified volume is to be transported from its present location to a
new one.
(&00): volume serial number (VSN)
(&01): current location of the volume
(&02): new location of the volume.
Response
Relocate the volume as requested.
MAR4181
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
MAR4181 INTERNAL MAREN ERROR
Meaning
An internal error occurred within the MAREN system.
Response
Contact the MAREN administrator.