Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEACOPY Copyright (C) (&00) (&01) All Rights Reserved
LEALOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEALOAD Program '(&00)' , Version ' (&01)' of '(&02)' loaded from file '(&03)'
LEASTRT
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEASTRT Procedure '(&00)', Version'(&01)' of '(&02)' started from file '(&03)'
LEA0P01
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P01 LEASY PASSWORD PROGRAM VERSION (&00) STARTED
Meaning
Program start.
(&00): Version number of the utility routine.
LEA0P02
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P02 THE PROGRAM SETS THE PASSWORDS FOR CATALOG-,AIM-,BIM- AND STATUSFILES
LEA0P03
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P03 PLEASE ENTER NAME OF LEASY DIRECTORY; ONLY (DUE) TO CONTINUE
LEA0P04
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P04 PLEASE ENTER NUMBER OF BIM-FILES; MAX. 3 DIGITS; ONLY (DUE) FOR END
LEA0P05
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P05 NORMAL TERMINATION OF LEASY PASSWORD PROGRAM
Meaning
Program termination without errors.
LEA0P06
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0P06 ABNORMAL TERMINATION OF LEASY PASSWORD PROGRAM
Meaning
Program termination with serious error.
LEA0001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0001 PLEASE TYPE IN NAME OF LEASY DIRECTORY
Response
Enter name of LEASY directory or *END.
LEA0097
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA0097 Warning: Calling program in 24-bit-mode, subsystem in upper address space. LEASY runtime system will be loaded into the class-6 memory.
LEA0098
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0098 LEASY TERM : RC-CC= (&00), RC-LC= (&01), RC-LCE= (&02)
Meaning
LEASY operation TERM failed with error.
See returncodes for reason.
Response
Check returncode by use of manual
LEA0099
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0099 LEASY STXIT: INTERRUPTION-CODE = (&00), PC = (&01)
Meaning
LEASY application ended without TERM (INTERRUPTION-CODE <>90)
or LEASY application ended with TERM
but still open transactions (INTERRUPTION-CODE=90)
Response
No
LEA0101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0101 LEASY CATALOG PROGRAM VERSION (&00) STARTED
Meaning
Program start.
(&00): Version number of the utility routine.
LEA0110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0110 NORMAL TERMINATION OF LEASY CATALOG PROGRAM
Meaning
Program termination without errors.
LEA0111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0111 ABNORMAL TERMINATION OF LEASY CATALOG PROGRAM
Meaning
Program termination with serious errors.
LEA0112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0112 ABNORMAL INPUT TERMINATION OF LEASY CATALOG PROGRAM
Meaning
Program termination due to error caused while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error that
occured.
Response
Correct error with the aid of the other error messages.
LEA0201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0201 LEASY PROGRAM FOR SECONDARY INDICES LOADSI VERSION (&00) STARTED
Meaning
Program start. (&01): Version number of the utility routine.
LEA0203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0203 PLEASE TYPE IN FILE SPECIFICATION
Meaning
Request to enter a primary file.
Response
Enter a file specification in accordance with the input description.
LEA0204
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0204 PLEASE TYPE IN SPECIFICATION FOR SECONDARY INDEX
Meaning
Request to enter SI specifications.
Response
Enter a secondary index specification in accordance with the input
description.
LEA0210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0210 NORMAL TERMINATION OF LEASY LOADSI PROGRAM
Meaning
Program termination without errors.
LEA0211
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0211 ABNORMAL TERMINATION OF LEASY LOADSI PROGRAM
Meaning
Program termination with serious errors.
LEA0212
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0212 ABNORMAL INPUT TERMINATION OF LOADSI
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA0301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0301 LEASY MAINTASK VERSION (&00) STARTED
Meaning
Program start. (&01): Version number of the utility routine.
LEA0310
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0310 NORMAL TERMINATION OF LEASY MAINTASK BECAUSE OF CLOSE DOWN FUNCTION
Meaning
The CLOSE DOWN function for LEASY-MAINTASK has been initiated by
LEASY-MASTER or by LEASY-MAINTASK *USE=C.
LEA0312
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0312 ABNORMAL INPUT TERMINATION OF LEASY MAINTASK PROGRAM
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA0401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0401 LEASY AFTER IMAGE PROGRAM (RECONST) VERSION (&00) STARTED
Meaning
Program start. (&01): Version number of the utility routine.
LEA0410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0410 NORMAL TERMINATION OF LEASY AFTER IMAGE PROGRAM (RECONST)
Meaning
Program termination without errors.
LEA0411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0411 ABNORMAL TERMINATION OF LEASY AFTER IMAGE PROGRAM (RECONST)
Meaning
Program termination with serious errors.
LEA0412
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0412 ABNORMAL INPUT TERMINATION OF LEASY AFTER IMAGE PROGRAM
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA0501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0501 LEASY MASTER PROGRAM VERSION (&00) STARTED
Meaning
Program start. (&01): Version number of the utility routine.
LEA0510
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0510 NORMAL TERMINATION OF LEASY MASTER PROGRAM
Meaning
Program termination without error.
LEA0511
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0511 ABNORMAL TERMINATION OF LEASY MASTER PROGRAM
Meaning
Program termination with serious errors.
LEA0512
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0512 ABNORMAL INPUT TERMINATION OF LEASY MASTER PROGRAM
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA0516
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0516 (*END=END OF PROGRAM)
LEA0518
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0518 FUNCTION SELECTION (OR BLANK=MAINTASK SELECTION; OR *END=END OF PROGRAM)
LEA0519
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0519 FUNCTION SELECTION (OR +=CONTINUE; OR BLANK; OR *END)
LEA0520
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0520 PLEASE ENTER PASSWORD
LEA0521
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0521 PLEASE ENTER NUMBER OF CYCLES (BLANK=(&00); MIN=0; MAX=9999)
LEA0522
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0522 PLEASE ENTER DISPLAY TIME (BLANK=(&00) SECONDS; MIN=0; MAX=(&01))
LEA0523
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0523 PLEASE ENTER FUNCTION CODE OF TABLE YOU WANT TO DISPLAY CYCLICALLY
LEA0524
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0524 (BLANK=NO LOCK)
LEA0525
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0525 PLEASE ENTER SESSION SPECIFIC TRANSACTION NUMBER
LEA0526
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0526 OR IDENTIFICATION OF TRANSACTION YOU WANT TO LOCK
LEA0527
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0527 PLEASE ENTER LOGICAL NAME OF FILE YOU WANT TO LOCK
LEA0528
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0528 PLEASE ENTER TASK SEQUENCE NUMBER FOR TASK
LEA0529
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0529 YOU WANT TO DISPLAY STATISTICALLY
LEA0530
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0530 PLEASE ENTER AIM FILE GENERATION NUMBER YOU WANT TO ERASE
LEA0531
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0531 OR IDENTIFICATION YOU WANT TO UNLOCK
LEA0532
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0532 OR IDENTIFICATION YOU WANT TO ROLLBACK
LEA0533
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0533 OR IDENTIFICATION YOU WANT TO DISPLAY STATISTICALLY
LEA0534
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0534 PLEASE ENTER LOGICAL NAME OF FILE YOU WANT TO UNLOCK
LEA0535
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0535 (BLANK=NO UNLOCK)
LEA0536
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0536 (BLANK=NO ROLLBACK)
LEA0537
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0537 (BLANK=NO CYCLIC DISPLAY)
LEA0538
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0538 (BLANK=NO ERASE)
LEA0539
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0539 DO YOU REALLY WANT TO TERMINATE THE LAST IO TASK (Y=YES; N=NO)?
LEA0540
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0540 FUNCTION SELECTION (OR A=ADD RETCODE; OR D=DELETE RETCODE;
LEA0541
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0541 OR BLANK=MAINTASK SELECTION; OR *END=END OF PROGRAM):
LEA0542
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0542 CONTINUE WITH DUE.
LEA0543
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0543 FUNCTION SELECTION (OR R=REACTION, IN CASE OF OPEN TRANSACTIONS AFTER
LEA0544
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0544 WAITING TIME; OR W=ENTER WAITING TIME; OR F=FILE SELECTION;
LEA0545
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0545 OR S=START FUNCTION PROCESSING; OR BLANK=MAINTASK SELECTION;
LEA0546
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0546 OR *END=END OF PROGRAM)
LEA0547
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0547 PLEASE ENTER THE TIME TO WAIT FOR THE COMPLETION OF NOT YET CLOSED TRANSACTIONS
LEA0548
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0548 (0<=WAITING TIME<=120; BLANK=5 MINUTES (STANDARD VALUE))
LEA0549
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0549 PLEASE ENTER REACTION IF THERE ARE UNFINISHED TRANSACTIONS AT THE END OF
LEA0550
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0550 WAITING TIME
LEA0551
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0551 R=RESET UNFINISHED TRANSACTIONS AND RESUME FUNCTION PROCESSING;
LEA0553
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0553 I=PROCESS ONLY THOSE FILES, WHOSE CORRESPONDING TRANSACTIONS ARE FINISHED
LEA0554
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0554 AFTER END OF WAITING TIME;
LEA0555
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0555 C=CANCEL FUNCTION, IF THERE ARE OPEN TRANSACTIONS AFTER END OF WAITING TIME;
LEA0556
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0556 FILE SELECTION (A=ADD FILENAME; OR R=REMOVE FILENAME;
LEA0557
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0557 OR E=END OF FILE SELECTION)
LEA0558
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0558 PLEASE ENTER LOGICAL FILENAME TO BE ADDED
LEA0559
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0559 (BLANK=STOP ADDING LOGICAL FILENAMES):
LEA0560
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0560 (BLANK=STOP ADDING LOGICAL FILENAMES;
LEA0561
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0561 *ALL=ADD ALL FILES, WHICH ARE MARKED FOR ROMS BY LEASY-CATALOG):
LEA0562
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0562 PLEASE ENTER LOGICAL FILENAME TO BE REMOVED
LEA0563
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0563 (BLANK=STOP REMOVING LOGICAL FILENAMES):
LEA0564
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0564 (BLANK=STOP REMOVING LOGICAL FILENAMES;
LEA0565
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0565 *ALL=REMOVE ALL FILES, WHICH ARE MARKED FOR ROMS BY LEASY-CATALOG):
LEA0566
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0566 +=CONTINUE; BLANK=ABORT LISTING OF FILENAMES
LEA0567
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0567 FUNCTION SELECTION (OR F=FREE AIM-FILE-GENERATIONS; OR P=PROTECT AIM-FILE-
LEA0568
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0568 GENERATIONS; OR BLANK=MAINTASK SELECTION; OR *END=END OF PROGRAM)
LEA0569
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0569 PLEASE ENTER THE QUANTITY OF AIM-FILE-GEN. TO FREE (BLANK=NO AIM-FILE TO FREE):
LEA0570
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0570 PLEASE ENTER THE QUANTITY OF AIM-FILE-GEN. TO PROTECT (BLANK=NO PROTECTION):
LEA0601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0601 LEASY SAVE PROGRAM VERSION (&00) STARTED
Meaning
Program start.
(&00): Version number of the utility routine.
LEA0602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0602 ENTER LIST OPTION. REPLY ('SYSO' OR 'SYSL' OR 'BOTH' OR 'NONE' OR '*END')
Meaning
LEASY asks for input of the output medium for the ARCHIVE report list.
Response
SYSO: output of the report list to SYSOUT.
SYSL: output of the report list to SYSLST.
BOTH: output of the report list to SYSOUT and to SYSLST.
NONE: no output of the report list.
*END: termination of program.
LEA0603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0603 ENTER CHANGED OPTION. REPLY ('YES' OR 'YES,LARGE' OR 'YES,NUMBER OF PAGES' OR 'NO' OR '*END')
Meaning
LEASY asks for input of the type of saving.
Response
YES : Save of changed files.
YES,LARGE : Save of changed files with mark LARGE in catalog.
YES,number of pages: Save of changed files greater the specified size.
NO : Save of all files.
*END : termination of program.
LEA0604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0604 ENTER NAME OF LEASY DIRECTORY AND ASK FOR CATID. REPLY ('DIRECTORY <, CATID=YES>')
Meaning
LEASY asks for input of the name of the directory.
Response
Reply in the form <:catid:> <$userid.> directory <,CATID=YES>.
catid : pubset of the directory.
$userid : user identification of the directory (only for $TSOS).
directory: name of the directory.
CATID=YES: filenames with catid in the ARCHIVE-directory.
LEA0605
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
LEA0605 ENTER DEVICE TYPE AND RETENTION PERIOD. REPLY ('DISK <,RETPD=DAYS>' OR 'TAPE <,RETPD=DAYS>' OR '*END')
Meaning
LEASY asks for input of the device type and the retention period in days
for the version of save.
For DAYS use a value between 0 and 32767.
If RETPD is not given, no retention period is stated.
Response
DISK <,RETPD=DAYS>: for disks with or without retention period.
TAPE <,RETPD=DAYS>: for tapes with or without retention period.
*END : termination of program.
LEA0606
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0606 ENTER VSN. REPLY (VSN OR 'PO' OR 'OP' OR NO SPECIFICATION OR '*END')
Meaning
LEASY asks for input of the VSN.
Response
vsn : one volume.
(vsn,...) : a multiple of volumes.
PO : volumes from the ARCHIVE directory.
OP : assignment of the volumes by the operator.
no specification: same function as OP.
*END : termination of program.
LEA0607
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0607 ENTER DEVICE. REPLY (NAME OF DEVICE OR NO SPECIFICATION OR '*END')
Meaning
LEASY asks for input of the name of the device.
Response
Name of device : look for possible specifications in the DMS manual.
no specification: same function as specification of TAPE.
*EOF : termination of programm.
LEA0608
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0608 ENTER USERIDS OF TEMPORARY FILES. REPLY (USERIDS OR NO SPECIFICATION)
Meaning
LEASY asks for the user identifications under which occurrences
of temporary files of the last entered directory are stored.
Response
User identifications: 1 to 5 userids in the form:
<:catid:>$userid1, .. ,<:catid:>$userid5
No specification : occurencies of the temporary files under the
userid of the directory.
LEA0609
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0609 NEXT LEASY DIRECTORY. REPLY ('Y' OR 'N' OR '*END')
Meaning
LEASY asks whether or not a further LEASY directory is to be saved.
Response
Y : a further LEASY directory is to be saved.
N : a new set of save operands is to be queried.
*END: termination of program.
LEA0610
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0610 NORMAL TERMINATION OF LEASY SAVE PROGRAM
Meaning
Program termination without errors.
LEA0611
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0611 ABNORMAL TERMINATION OF LEASY SAVE PROGRAM
Meaning
Program termination with serious errors.
LEA0612
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0612 ABNORMAL INPUT TERMINATION OF SAVE
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA0701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0701 LEASY IO-TASK VERSION (&00) STARTED
Meaning
Programm start.
(&00): Version number of the utility routine.
LEA0710
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0710 NORMAL TERMINATION OF LEASY IO-TASK BECAUSE CLOSE-DOWN FUNCTION
Meaning
The CLOSE DOWN function has been initiated for LEASY-IOTASK.
LEA0711
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0711 *** LEASY IO-TASK FINISHED WITH ERROR ***
Meaning
Program termination of run with serious error.
LEA0801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0801 LEASY CONVERT PROGRAM VERSION (&00) STARTED
Meaning
(&00): Version number of the utility routine.
LEA0810
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0810 NORMAL TERMINATION OF LEASY CONVERT PROGRAM
Meaning
Program termination without errors.
LEA0811
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0811 ABNORMAL TERMINATION OF LEASY CONVERT PROGRAM
Meaning
Program termination with serious error.
LEA0812
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA0812 ABNORMAL INPUT TERMINATION OF LEASY CONVERT PROGRAM
Meaning
Program termination due to error while reading in from SYSDTA.
The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA1001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
LEA1001 DMS ERROR (&00) WITH FILE (&01)
Meaning
DMS error (&00) has occured during processing of file (&01).
Response
Identify error with aid of the "System Messages" manual.
LEA1002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1002 ERROR (&00) WITH JOB VARIABLE (&01)
Meaning
JV error (&00) has occured during processing of JV (&01).
Response
Identify error with aid of the "System Messages" manual.
LEA1101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1101 DMS ERROR WHILE TESTING SI-FILE FOR SI-NAME (&00)
Meaning
A DMS error was detected while checking the SI file for pointers for
the secondary index (&00). The preceding message LEA1001 identifies
the error.
Response
Identify error with aid of the "System Messages" Manual.
LEA1102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1102 DMS ERROR WHILE TESTING SI-FILE FOR SI-NAME(S)
Meaning
A DMS error was detected while checking the SI file for pointers.
Response
Identify error with aid of the "System Messages" manual.
LEA1103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1103 DMS ERROR WHILE ERASING SECONDARY INDEX FILE
Meaning
DMS error occurred while erasing SI file. The preceding message LEA1001
indicates which DMS erros occured.
Response
Identify error with aid of the "Ssystem Messages" Manual.
LEA1201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1201 LEASY DIRECTORY READ ERROR
Meaning
DMS error has occurred while reading LEASY directory.
LEA1202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1202 ERROR WHILE HANDLING PRIMARY FILE (&00)
Meaning
An error has occurred while processing the file (&00). The preceding
message LEA1001 indicates the DMS error.
Response
Wait for prompt.
LEA1203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA1203 ERROR WHILE HANDLING SECONDARY INDEX FILE (&00)
Meaning
An error has occurred while processing the SI file (&00). The preceding
message LEA1001 indicates the DMS error.
Response
Wait for prompt.
LEA2000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2000 REPAIR-DISK-FILES NOT POSSIBLE FOR FOREIGN USERID WITH FILE (&00)
Meaning
It has been discovered while opening the file (&00) that this file has not
been closed correctly. The file is not, however, cataloged under the
user ID under which the LEASY-MAINTASK utility routine is executed.
LEASY-MAINTASK is unable for this reason to carry out REPAIR-DISK-FILES.
Response
Execute REPAIR-DISK-FILES for the file (&00) in the user ID of the
file (&00).
LEA2001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2001 DUPLICATE COMMANDS ARE NOT ALLOWED
Meaning
At least one statement in the statement sequence has been repeated.
Response
Correct input.
LEA2002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2002 DUPLICATE PARAMETERS ARE NOT ALLOWED
Meaning
A parameter keyword was specified more than once.
Response
Correct error and repeat input.
LEA2003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2003 LEASY DIRECTORY IS IN USE
Meaning
The addressed LEASY directory file has already been opened.
LEA2004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2004 FILE (&00) NOT FOUND
Meaning
The file (&00) is not contained in the tables of the common memory CMMAIN.
LEA2005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2005 ERROR: DIFFERENT VERSIONS. MAINTASK: (&00). (&01): (&02).
Meaning
The common memory CMMAIN was created by the version (&00) of
LEASY-MAINTASK utility routine. The version (&02) of (&01)
utility routine is incompatible with that.
Response
Start the same version of LEASY-MAINTASK utility routine and (&01)
utility routine.
LEA2006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2006 WARNING: (&00) STATEMENT IN BS2000 VERSIONS LESS THAN (&01) IGNORED
Meaning
The (&00) statement is usefull in BS2000 versions greater or equal to
(&01).
The standard value for the statement is assumed.
(&00): Name of the statement
(&01): BS2000 version in the form 'vv.v'.
LEA2007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2007 Size of file (&00) greater than 32 gigabyte
Meaning
File (&00) has filesize greater than
32 Gigabyte. LEASY cannot work with
that file.
Response
Reduce file until filesize is smaller
than 32 gigabyte
LEA2008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2008 ONLY (&00) OF (&01) AIM-FILE GENERATIONS UNPROTECTED.
Meaning
It was intended to unprotect one or more AIM-file-generations with
the utility LEASY-MASTER (function AIMA) respectively LEASY-MAINTASK
(parameter AGF). But there are not as many protected
AIM-file-generations as specified ( (&00): number of actual
unprotected AIM-file-generations;(&01): intended number of
AIM-file-generations to unprotect ).
Response
None.
LEA2101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2101 MOD = NEW: FILENAME MUST BE FULLY QUALIFIED
Meaning
The file name must be fully qualified when creating a LEASY file.
Response
Correct error and repeat input.
LEA2102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2102 (&00) WARNING: UPDATE PASSWORD IGNORED
Meaning
Passwords must not be altered when creating a LEASY file. The input is
ignored.
(&00): MODE = NEW or MODE = CATALOG.
LEA2103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2103 (&00): DELETE OF SECONDARY INDICES NOT ALLOWED
Meaning
Secondary indices cannot be deleted when creating a LEASY file.
(&00): MODE = NEW or MODE = CATALOG.
Response
Omit deletion request and repeat input.
LEA2104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2104 (&00): NOT ALLOWED DMS PARAMETERS FOUND
Meaning
(&00): MODE = CATALOG or MODE = UPDATE: The DMS attributes of
a LEASY file must not be updated (exception: SHARE operand)
LEASY-FILETYPE = F: The DMS attributes must be defined in the
SET-FILE-LINK command (exception: FCBTYPE and BLKCTRL)
LEASY-FILETYPE = M: The DMS attributes are copied from the
model (exception: SHARE operand)
Response
Omit DMS parameter and repeat input.
LEA2105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2105 MODE = UPDATE: PARAMETER COMBINATION NOT ALLOWED
Meaning
The specified statement combination is not permitted when updating
the attributes of a LEASY file
Response
Use a different statement combination.
LEA2106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2106 TYPE = NEW OR TYPE = ERASE: CHANGE OF PASSWORD NOT ALLOWED
Meaning
Passwords must not be altered when creating or erasing a LEASY
directory
Response
Correct error and repeat input.
LEA2107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2107 FCBTYPE = SAM OR LEASY FILETYPE = F: SECONDARY INDICES ARE NOT ALLOWED
Meaning
Secondary indices are not permitted for SAM files or LEASY foreign
files.
LEA2108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2108 MORE THAN 255 SECONDARY INDICES ARE NOT ALLOWED
Meaning
The maximum number of secondary indices permitted per LEASY file is 255.
LEA2109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2109 SECONDARY INDEX (&00): DUPLICATE KEYNAMES NOT ALLOWED
Meaning
A secondary index name was specified more than once in a file
specifaction.
Response
Delete duplicate names and repeat input.
LEA2110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2110 SECONDARY INDICES MUST NOT BE DEFINED FOR AN INSTANCE OF A MODEL GROUP
Meaning
Secondary keys must not be specified for an instance of a model group;
those defined for the model apply.
Response
Omit secondary indices and repeat input if necessary.
LEA2111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2111 FILENAME INVALID FOR LEASY FILE TYPE (&00)
Meaning
The file name is invalid for the LEASY file type (&00).
Response
Correct file name and repeat input.
LEA2112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2112 WRONG PASSWORD
Meaning
Password does not tally with information stored.
Response
Correct password and repeat input.
LEA2113
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2113 NO FILE FOUND
Meaning
None of the files specified in an information request could be found.
LEA2114
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2114 SECONDARY INDICES: TOO MANY RECORD TYPES DEFINED
Meaning
The space reserved for the record type definition is insufficient.
Approximately 8 to 16 Kbytes are available for record type definitions
in each file entry, depending on the number of secondary index
definitions.
Response
Check record types and reduce number.
LEA2115
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2115 ERROR: RECSIZE GREATER THAN BLKSIZE ALLOWES
Meaning
The record length greater than the block length allowes.
Response
Correct error and repeat input.
LEA2116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2116 NO M-FILE MODEL DEFINED
Meaning
No instance can be defined for a non-model file.
LEA2117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2117 SECONDARY INDEX: MAXIMUM LENGTH OF RECORD TYPES GREATER THAN LENGTH OF RECORD TYPE FIELD
Meaning
A record type is longer than the record type field.
Response
Shorten the record types that are too long and repeat input.
LEA2118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2118 LEASY DIRECTORY NOT EMPTY. DO YOU REALLY WANT TO ERASE NON EMPTY LEASY DIRECTORY (&00)? (Y=YES; N=NO)
Meaning
The user wishes to delete the LEASY directory (&00) that still contains
file entries.
Response
Input "Y" if the directory is to be deleted.
Input "N" if the catalog is not to be deleted.
LEA2119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2119 FILE (&00) ALREADY CATALOGED IN LEASY DIRECTORY
Meaning
There is already an entry in the LEASY directory for the file (&00)
Response
Repeat input if necessary using the operand MODE = U.
LEA2120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2120 ERASE M-FILE MODEL NOT ALLOWED: INSTANCES ARE STILL CATALOGED
Meaning
The model file in a model file group may only be erased when there are
no more instances left in this group.
Response
Delete instances explicitly.
LEA2121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2121 FCBTYPE = PAM DEMANDS STANDARD BLKSIZE
Meaning
Not standard blocking is not permitted for disk files.
Response
Correct error and repeat input.
LEA2122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2122 KEYLEN (SI-FILE) > 255
Meaning
The sum of (1 + greatest SI length + length of primary index) exceeds 255.
Response
Reduce key length and repeat input.
LEA2123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2123 MAX. ((SI-KEYPOS) + (SI-KEYLEN)) GREATER THAN MAX. RECSIZE OF PRIMARY FILE
Meaning
The secondary key is greater than the primary record.
Response
Correct error and repeat input.
LEA2124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2124 SECONDARY INDEX: MAXIMUM KEYLENGTH OF NEW SI-KEY > THAN MAXIMUM OF EXISTING KEY
Meaning
An attempt has been made to add a secondary key longer than the
longest existing key.
Response
If necessary, delete all existing keys and re-enter them.
LEA2125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2125 RECORDTYPE FIELD UPDATE NOT ALLOWED WHILE POINTERS FOR SI NAME (&00) STILL EXISTING
Meaning
Updating the record type field is prohibited so long as pointers
exist in the SI file for the key (&00).
Response
Delete any pointers which may exist using LEASY-LOADSI; then update the
entry in the LEASY catalog.
LEA2126
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2126 RECORDTYPE FIELD UPDATE NOT ALLOWED WHILE POINTERS FOR SI NAME (&00) IN INSTANCE (&01) FOR THIS M-FILE STILL EXISTING
Meaning
Updating the record type field is prohibited so long as pointers
exist in the SI file of the instance (&01) for the key (&00) of the model
file group.
Response
Delete any pointers in the instance (&01) which may exist using LEASY-
LOADSI;
then update the entry in the LEASY directory.
LEA2127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2127 SECONDARY INDEX: DELETE SI NOT POSSIBLE. SI-NAME (&00) NOT IN LEASY DIRECTORY
Meaning
The requested secondary index (&00) is not entered in the LEASY
directory for this file.
LEA2128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2128 RECORDTYPE FIELD UPDATE NOT ALLOWED WHILE LEASY APPLICATION ACTIVE
Meaning
Updating the record type field is forbidden during an ongoing session
with the specified LEASY directory.
Response
Wait until the end of the current session.
LEA2129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2129 MORE THAN 512 SI KEYPARTS FOR ONE FILE ARE NOT ALLOWED
Meaning
The maximum total number of key parts for all secondary indices is 512
per primary file.
Response
Reduce the number of key parts.
LEA2130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2130 MODE = CATALOG DEMANDS LEASYTYPE = S
Meaning
Incorporation of already existing DMS files in the LEASY directory is
restricted to master files.
Response
Correct error and repeat input.
LEA2131
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2131 NAME PARAMETER DEMANDS LEASYTYPE = S
Meaning
Assignment of arbitrary file names is restricted to LEASY master files.
Response
Correct error and repeat input.
LEA2132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2132 FCBTYPE = DAM ONLY FOR PAM-FILES
Meaning
A DAM file to be imported (*FILE ..., MOD = C) is not an UPAM file.
LEA2133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2133 SECONDARY INDEX (&00): RECORD TYPE (&01)(&02)' ALREADY SPECIFIED
Meaning
The record type (&01) has already been specified for the secondary index
(&00) or is already contained in another record type field group value.
Response
Omit record type (&01) and repeat input.
LEA2134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2134 SECONDARY INDEX: RECORD TYPES NOT ALLOWED WITHOUT RECORD TYPE FIELD DEFINITION
Meaning
Input of record type definitions is not permitted if a record type is
not defined.
Response
Repeat input with a record type field definition.
LEA2135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2135 RECORD TYPE FIELD DEFINITION NOT ALLOWED FOR AN INSTANCE OF A MODEL GROUP
Meaning
A record type field definition is not allowed for instances of a model
file group. The record type field of the model is valid for all instances.
Response
Repeat input without record type field.
LEA2136
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2136 RECORD TYPE FIELD NOT WITHIN RECORD
Meaning
The record type field is not wholly within the record.
Response
Correct record type field and repeat input.
LEA2137
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2137 FOR FILE (&00)
LEA2138
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2138 SECONDARY INDEX: SI UPDATE NOT ALLOWED WHILE POINTERS FOR SI-NAME (&00) STILL EXISTING
Meaning
Updating the secondary index is prohibited so long as pointers exist
in the SI file for the key (&00).
Response
Delete any pointers which may exist using LEA.LOADSI;
then update the entry in the LEASY directory.
LEA2139
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2139 SECONDARY INDEX: SI UPDATE NOT ALLOWED WHILE POINTERS FOR SI-NAME (&00) IN INSTANCE (&01) FOR THIS M-FILE STILL EXISTING
Meaning
Updating the secondary index is prohibited so long as pointers exist
in the SI file of the instance (&01) for the key (&00) of the model file
group.
Response
Delete any pointers in the instance (&01) which may exist using LEASY-
LOADSI;
then update the entry in the LEASY directory.
LEA2140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2140 SECONDARY INDEX: SI UPDATE NOT ALLOWED WHILE LEASY APPLICATION ACTIVE
Meaning
Updating the secondary index is forbidden during an ongoing session with
the specified LEASY directory.
Response
Wait until the end of the current session.
LEA2141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2141 SECONDARY INDEX: SI DELETE NOT ALLOWED WHILE POINTERS FOR SI-NAME (&00) STILL EXISTING
Meaning
Deleting the secondary index is prohibited so long as pointers exist
in the SI file for the key (&00).
Response
Delete any pointers which may exist using LEASY-LOADSI;
then delete the entry in the LEASY directory.
LEA2142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2142 SECONDARY INDEX: SI DELETE NOT ALLOWED WHILE POINTERS FOR SI-NAME (&00) IN INSTANCE (&01) FOR THIS M-FILE STILL EXISTING
Meaning
Deleting the secondary index is prohibited so long as pointers exist
in the SI file of the instance (&01) for the key (&00) of the model file
group.
Response
Delete any pointers in the instance (&01) which may exist using LEASY-
LOADSI;
then delete the entry in the LEASY directory.
LEA2143
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2143 SECONDARY INDEX: SI DELETE NOT ALLOWED WHILE LEASY APPLICATION ACTIVE
Meaning
Deleting the secondary index is forbidden during an ongoing session with
the specified LEASY directory.
Response
Wait until the end of the current session.
LEA2144
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2144 THE LINKNAME (FOR POOL/SIPOOL) HAS MORE THAN 8 CHARACTERS.
Meaning
the linkname may only have max. 8 characters.
Response
correct linkname and try again.
LEA2145
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2145 THE FIRST SIGN OF THE LINKNAME IS NOT A CHARACTER.
Response
correct linkname and try again.
LEA2146
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2146 WARNING! LINKNAMES (FOR POOL/SIPOOL) ARE IGNORED.
Meaning
when BLKCTRL=PAMKEY is given (default by ISAM-OLD), the
linknames are not processed.
LEA2147
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2147 WARNING! POOLPARAMETERS ARE IGNORED.
Meaning
Poolparameters are only processed in case of ISAM-files and SI-files.
LEA2148
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2148 DMS-ERROR (&00) WITH POOL (&01).
Meaning
DMS-error (&00) has occured during processing of pool (&01).
Response
identify error with aid of the "system messages" manual.
LEA2149
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2149 POOL (&00) ALREADY EXISTS.
Meaning
the pool to create has already an entry in the
LEASY-catalog.
LEA2150
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2150 POOL (&00) IS NOT IN CATALOG.
Meaning
the pool which should be correct (or deleted) has no enty
in the Leasy-catalog.
LEA2151
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2151 WARNING: (&00) IGNORES (&01)
Meaning
(&00): MOD=U, MOD=C, LEASY-FILETYPE=M or LEASY-FILETYPE=F
(&01): RECFORM, BLKCTRL, BLKSIZE
In MOD=C,MOD=U,LEASY-FILETYP=F and examplaries of model-files LEASY has
no influence to the DMS-parameters, because these have already been tied
down e.g.have been fixed in the runtime-sytem for foreign-files.
LEA2152
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2152 (MODE=LINK) WARNING: DMS-PARAMETERS ARE IGNORED
Meaning
MODE=LINK ignores DMS-parameters specified in the *FIL-Command, they
must be defined in DMS-commands.
LEA2153
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2153 SHARUPD OR DUPEKY NOT ALLOWED FOR LEASY-FILES
Meaning
LEASY rejects files with SHARUPD=YES or DUPEKY=YES.
LEA2154
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2154 POOL-LINKNAME: INCONSISTENCY BETWEEN *FIL AND DMS-COMMANDS
Meaning
Different pool-linknames were defined in *FIL and the DMS-commands.
Response
Remove one of the linknames.
LEA2155
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2155 LEASYTYPE = T/M DEMANDS STANDARD FILENAMES
Meaning
The filename, that was specified in DMS, is not correct.
The correct form is "catalogname.linkname".
Response
Correct the DMS-commands.
LEA2156
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2156 INCONSISTENCY BETWEEN FILENAMES IN DMS AND *FIL
Meaning
The use of the NAME operand is restricted, when the file was defined in
DMS.
The only permitted difference between the file-names is the missing of
catid and/or userid in the NAME operand.
Response
Correct the DMS-commands or NAME operand.
LEA2157
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2157 MODE=LINK IS NOT ALLOWED FOR FOREIGN FILES AND INSTANCES OF A MODEL
Meaning
Foreign files and instances of a model must be created with MODE=NEW.
Response
Try again with MODE=NEW!
LEA2158
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2158 MODE=LINK: THE CHARACTERISTICS OF FILE (&00) ARE NOT DEFINED
Meaning
The characteristics of the file must be defined in DMS before
the *FIL-command. The DMS LINK-NAME and the logical filename in *FIL
must be equal.
(&00): logical filename = LINK-NAME
LEA2159
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2159 WARNING: FCBTYPE = SAM OR LEASY-FILETYPE = F IGNORES SIOPERF
Meaning
With FCBTYPE = SAM or LEASY-FILETYPE = F secondary indices are not
allowed.
Therefore the IO-performance parameter of the SI-file cannot be defined.
LEA2160
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2160 WARNING: FCBTYPE = SAM OR LEASY-FILETYPE = F IGNORES RTF
Meaning
With FCBTYPE = SAM or LEASY-FILETYPE = F secondary indices are not
allowed.
Therefore no record-type-field can be specified.
LEA2161
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2161 WARNING: LENGTH OF FILENAME GREATER THAN 54 CHARACTERS
Meaning
Changing of filename entries in LEASY directory by using OLDL/NEWL
causes a filename length greater than 54 characters. Conversion not
processed, further information given by SYSLST-report.
Response
First delete filename entry in LEASY directory by using *ERA-instruction,
add file with correct length using the *FIL-instruction afterwards.
LEA2162
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2162 Bim file (&00) exists several times on various pubsets with identical userid.
Response
Make sure that BIM files are unambiguous.
LEA2163
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2163 BIM file (&00) not empty.
Meaning
To perform OLDL/NEWL function BIM files must be devaluated.
Response
Consistent condition required.
LEA2164
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2164 OLDL/NEWL function will not be executed.
Meaning
BIM file(s) ambiguous or not empty.
Function not processed.
Response
Unambiguousness and/or consistent condition required.
LEA2165
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2165 AIM=Y is not valid for foreign or temporary files. AIM=N is inserted.
Meaning
LEASY-RECONST cannot work with foreign or temporary files.
Therefore AIM=Y is not valid for these filetypes.
AIM=N is inserted.
LEA2166
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2166 File (&00) is a temporary , a foreign, a model or a DAM/SAM master file. ROM=N is inserted.
LEA2167
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2167 ROM definition at an instance of a model file group is ignored. ROM definition of the model is assumed.
LEA2201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2201 SI NOT POSSIBLE FOR PRIMARY FILE WITH LEASY FILE TYPE "(&00)"
Meaning
The specified file is a LEASY TYPE (&00) file. No secondary indices
are possible for this LEASY file type.
LEA2202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2202 SECONDARY INDEX (&00) NOT IN LEASY DIRECTORY
Meaning
The specified secondary index name (&00) is not in the LEASY directory.
Response
Wait for prompt.
LEA2203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2203 SECONDARY INDEX (&00) ALREADY IN SECONDARY INDEX FILE EXPANDED
Meaning
The secondary index (&00) given in an ADD specification already exists.
Response
Wait for prompt.
LEA2204
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2204 WARNING: (&00) SI POINTERS ARE NOT GENERATED. SOME PRIMARY RECORDS SHORTER THAN HIGHEST SI KEY POSITION.
Meaning
(&00) SI pointers are not generated for a primary file with variable
length
records as one or more secondary keys are outside the key length limits.
Secondary keys cannot be used to access such short records.
LEA2205
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2205 FOR SECONDARY INDEX (&00) NO POINTERS IN SI FILE
Meaning
The secondary key (&01) has been specified in DELETE but there are no
pointers for this key in the SI file.
Response
Wait for prompt.
LEA2206
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2206 DUPLICATE SECONDARY KEYS ARE NOT ALLOWED BUT FOUND FOR SI (&00). ONLY THE FIRST SI POINTER IS GENERATED
Meaning
The definition of the secondary key (&00) in the LEASY directory requires
that primary records do not contain duplicated secondary keys;
duplicates have however been found.
At most the first 5 primary key pointers are displayed. The
subsequent message LEA2207 gives the total number of duplicates found.
LEA2207
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2207 (&00) DUPLICATE KEYS FOUND
Meaning
Duplicates not permitted for a secondary key have nevertheless been
discovered. Details of the secondary index concerned are given in the
previous message LEA2206. The total number of primary record pointers
found for a particular secondary key value is (&00).
Response
Correct SI definition in LEASY catalog or primary file and repeat
LEASY-LOADSI.
LEA2208
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2208 REQUESTED PADDING IMPOSSIBLE TO REALIZE
Meaning
LEASY-LOADSI is attempting to reserve space in the SI records in accor
dance with the PAD entry in the file specification, but the remaining
available space is smaller than a single SI record.
Response
Wait for prompt.
LEA2209
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2209 DUPLICATE PRIMARY KEYS ARE NOT ALLOWED BUT MORE THAN ONE RECORD FOUND FOR KEY (&00)
Meaning
More than one record with primary key (&00) has been found in the primary
file. Only one pointer has been set up for the key.
Response
Remove duplicate records from the primary file.
LEA2210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2210 SECONDARY KEY = (&00)
Meaning
Second part of LEA2206.
LEA2211
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2211 PRIMARY KEY = (&00)
Meaning
Thirt part of LEA2206.
LEA2301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2301 COMMON MEMORY ALREADY EXISTS
Meaning
The common memory CMMAIN cannot be initialized because one already exists
for the LEASY directory specified.
LEA2302
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2302 MEMORY OVERFLOW. INCREASE *MEM VALUE!
Meaning
The number of files (*FIL) and/or transactions (*TRA) exceeds the value
specified or preset in *MEM.
Response
Repeat run with higher *MEMORY specification.
LEA2303
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2303 WARNING: START = WARM, BUT COLD START EXECUTED
Meaning
A warm start has been requested, but a cold start executed because no
BIM files exist or all BIM files empty.
LEA2304
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2304 START = COLD, BUT BIM FILE (&00) NOT EMPTY!
Meaning
A cold start has been requested but the BIM file (&00) is not empty.
Response
Execute warm start.
LEA2305
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2305 FILE (&00) NOT IN COMMON MEMORY DEFINED
Meaning
The file (&00) to be warm-started cannot be found in the common memory
CMMAIN.
Response
Check using LEASY-CATALOG to ensure that the file (&00) is still defined
in the LEASY directory and that its transfer to the common memory has
obstructed by a lock (LOCK operand in the *FIL statement).
LEA2306
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2306 WARNING: FILE (&00) LOCKED AND NOT AVAILABLE
Meaning
The file (&00) has been locked by the LEA.CATALOG utility routine and
is not available.
LEA2307
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2307 WARNING: "START = WARM, RESET", BUT NO PRELIMINARY ENDED TRANSACTIONS FOUND
Meaning
WARM, RESET warm start option has been requested but no suspended
transaction exists.
LEA2308
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2308 ASPACE CONTRADICTS DEVICE
Meaning
Either ASPACE = TAPE was entered and the AIM file is on disk or
a storage allocation for disk was entered and the AIM file is on tape.
Response
Correct input and start maintask again.
LEA2309
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2309 WARNING: ENTERED CATID (&00) NOT EQUAL CATID (&01) BY (&02) FILE.
Meaning
The catid (&00) entered as MAINTASK operand for (&02) file is not
equal to the (&01) catid saved in the LEASY directory.
The given catid (&00) is used.
LEA2310
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2310 TO DECREASE THE NUMBER OF GENERATIONS IS NOT POSSIBLE. GENERATION(S) NOT FREE.
Meaning
It is not possible to decrease the number of AIM file generations,
because the oldest generations are not yet reconstructed on the
shadow files and therefore are not free.
LEA2311
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2311 START = (&00) BUT CANNOT BE DONE BY LEASY-RECONST.
Meaning
START = (&00) is requested using the automatic reconstruction of
shadow files. This is not executed by LEASY-RECONST.
Response
Look at messages of LEASY-RECONST and try it again.
LEA2312
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2312 NORMAL TERMINATION NOT POSSIBLE: NOT CLOSED TRANSACTIONS.
Meaning
A LEASY session with AIM-writing by MAINTASK was requested to
close with the CLOS command. But the reconstruction of
all AIM generations is not possible because a transaction is opened
and not closed within the specified waiting period after CLOS was
entered.
Response
Start new session with warmstart (STA=W).
LEA2313
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2313 ERROR: REN COMMAND MISSING OR INVALID.
Meaning
A PASSWORD command is not possible before a RENTER command is given.
Response
Enter commands in the sequence REN=..., PAS=...
LEA2314
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2314 WARNING: NOT FREE AIM GENERATIONS ERASED.
Meaning
While comparing the AIM control record with the TSOSCAT entry it was
detected that not free generations are erased. The shadow files are
maybe not at the same level as the original files.
Response
If necessary terminate the session and bring the application in
consistent state.
LEA2315
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2315 WARNING: THIS OPERATING SYSTEM VERSION DOES NOT SUPPORT NKISAM FILES
Meaning
There are NKISAM files (BLKCTRL<>PAMKEY) in the Leasy-catalog,
but they are not supported by this operatingsystem version.
Response
It is not possible to work with the NKISAM files in this session.
LEA2316
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2316 MAINTASK UNABLE TO START. GENERATION(S) NOT FREE
Meaning
Automatic reconstruction of shadow files is used, but LEASY-RECONST
is unable to reconstruct the oldest generation on the shadow files,
so AIM file generations are not free.
Response
Look at messages of LEASY-RECONST and try it again.
LEA2317
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2317 AIM-BUFFER TO SMALL.
Meaning
Due to the great number of files, which can be opened
simultaneously, the OPEN-element of the AIM-buffer
will be larger then half of the AIM-buffer length.
Response
Increase the value of the AIM-buffer by using the
AIB-command of the maintask.
LEA2318
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2318 ERROR: PAS COMMAND NOT POSSIBLE.
Meaning
The pasword command is not possible because the RECONST enter file
specified in the REN command already exists and so LEASY did not
modify the enter file.
LEA2319
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2319 WARNING: NO ACTIONS, SESSION WAS ALREADY CONSISTENT
Meaning
Only empty BIM-files could be found.
LEA2320
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2320 WARNING: STA=W IS SET BECAUSE OF USE=C
Meaning
The combination of USE=C and STA=C is impossible. LEASY changes STA=C into
STA=W.
LEA2321
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2321 MAINTASK CANNOT BE STARTED. THERE ARE FILES WITH AIM=Y/R AND AUT=Y.
Meaning
It was intended to start LEASY-MAINTASK with automatic reconstruction
of shadowfiles. At the same time there are files in the LEASY-catalog
with AIM=Y or AIM=R specified in the FIL-statement of LEASY-CATALOG.
Therefore the start of LEASY-MAINTASK has been aborted to avoid a
possible loss of AIM-filedata for these files.
Response
For every file with AIM=Y or AIM=R specified in the FIL-statement of
the utility LEASY-CATALOG, this have to be changed to AIM=N, AIM=(Y,A)
or AIM=(R,A) and if necessary the corresponding shadowfiles have to be
created. After this the utility LEASY-MAINTASK can be started again.
For which files AIM=Y or AIM=R has been specified can be determined
with the statement INF ,M of the utility LEASY-CATALOG.
LEA2322
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2322 WARNING: THERE ARE FILES WITH AIM=Y/R AND AUT=Y.
Meaning
It was intended to start LEASY-MAINTASK with automatic reconstruction
of shadowfiles. At the same time there are files in the LEASY-catalog
with AIM=Y or AIM=R specified in the FIL-statement of LEASY-CATALOG.
Therefore for these files the danger of loss of AIM-filedata exists.
Response
For every file with AIM=Y or AIM=R specified in the FIL-statement of
the utility LEASY-CATALOG, this should be changed to AIM=N, AIM=(Y,A)
or AIM=(R,A) and if necessary the corresponding shadowfiles have to be
created. After this the utility LEASY-MAINTASK should be started again.
For which files AIM=Y or AIM=R has been specified can be determined
with the statement INF ,M of the utility LEASY-CATALOG.
LEA2401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2401 LEASY MAINTASK NOT READY OR AVAILABLE FOR RECONSTRUCTION
Meaning
The reconstruction program cannot be executed because LEASY maintask has
not, or has not yet, been started with the statement USE = R, or because
it has not yet entered the wait state.
Response
Either wait for the wait state or start LEASY-MAINTASK, specifying the
USE = R statement, and repeat the reconstruction run.
LEA2402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2402 *CAT COMMAND MISSING OR INVALID
Meaning
In the *FIL statement, or after the statement input (*END statement), it
has been discovered that the *CAT statement is either missing
or invalid in the statement sequence.
Response
Correct input.
LEA2403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2403 PARAMETER MISSING
Meaning
A statement must contain at least one parameter input.
Response
Correct input.
LEA2404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2404 *REP COMMAND CONTRADICTS *MOD PRINT = MINIMUM
Meaning
If the *REPORT statement is used, the *MODE statement with
PRINT = NORMAL is requiered.
Response
Correct input.
LEA2405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2405 (&00) WAS CHANGED TO (&01)
Meaning
The operand (&00) was changed to (&01).
LEA2406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2406 ERROR IN FILE FILTER WITH FILE (&00). DUPLICATE FILENAMES ARE NOT ALLOWED.
Meaning
File name (&00) is duplicated in the file filter selection.
Response
Correct input.
LEA2407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2407 ERROR WITH RECORD SELECTION ELEMENT "(&00)": DUPLICATE RECORD SELECTIONS ARE NOT ALLOWED.
Meaning
The AIM record type (&00) has been specified more than once.
Response
Correct input.
LEA2408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2408 ERROR WITH EXTRACTION ELEMENT EXT = ((&00), (&01)): DUPLICATE RECORD EXTRACTIONS ARE NOT ALLOWED.
Meaning
The record extraction element with position (&00) and length (&01) has
been specified more than once.
Response
Correct input.
LEA2409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2409 RECORD EXTRACTION DEMANDS LENGTH = ALL
Meaning
The record extract entry requires a length value ALL.
Response
Correct input.
LEA2410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2410 SIUPDATE = YES CONTRADICTS UPDATE = NO
Meaning
SI files cannot be reconstructed without reconstructing the
corresponding primary files.
Response
Correct input.
LEA2411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2411 (&00) CONTRADICTS (&01)
Meaning
(&00) and (&01) contradicts one another. (&00) must be >= (&01).
Response
Correct input.
LEA2412
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2412 LASTTRANSACTION PARAMETER DEMANDS TOSESSION PARAMETER
Meaning
Use of the LAS parameter necessitates use of the TOS parameter.
Response
Correct input.
LEA2413
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2413 (&00) WARNING: FOR COMMAND (&01) THE FOLLOWING OPERANDS ARE CHANGED:
Meaning
The statement (&00) forces in the statement (&01) the change of operands
as specified in the following message.
LEA2414
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2414 (&00): USE OF FILE FILTER, SESSION FILTER, RANGE FILTER AND DATE FILTER IS NOT ALLOWED.
Meaning
The *FIL, *SES, *RAN and *DAT statements are not allowed in conjunction
with (&00).
LEA2415
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2415 GENERATION PARAMETER FORBIDS FROMGENERATION AND TOGENERATION PARAMETER
Meaning
The GEN parameter must not be used at the same time as the FROMGEN
or TOGEN parameters in the *CAT statement.
LEA2416
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2416 *MOD TRANSACTIONS = (&00): RANGE OF AIM GENERATION DOES NOT INCLUDE LAST AIM GENERATION
Meaning
The last AIM generation must not be excluded from the generation number
selection in the *CAT statement with *MOD TRANSACTIONS = CLOSED.
LEA2417
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2417 *MOD TRANSACTIONS = CLOSED: NO RECONSTRUCTION ALLOWED WHILE LEASY APPLICATION ACTIVE
Meaning
No common memory of the affiliated directory can exist for a
reconstruction
run with TRANSACTIONS = CLOSED.
LEA2418
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2418 *MOD TRANSACTIONS = CLOSED: NOT POSSIBLE TO REALIZE BECAUSE AIM FILE ON TAPE
Meaning
If AIM file on tape it is not possible to mark records of not closed
transactions unguilty.
Response
Start utility LEASY-RECONST with MODUS TRA=V
LEA2419
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2419 *MOD UPDATE = YES: PARAMETER RANGE NOT ALLOWED
Meaning
The RANGE filter is only allowed when LEA.RECONST is used to show the
entry of an AIM file.
Response
Either omit RANGE parameter or use *MOD UPD = N.
LEA2420
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2420 COLD START NOT POSSIBLE BECAUSE AIM FILE GENERATION (&00) IN STATE (&01).
Meaning
In the mode automatic reconstruction of shadow files is a cold start
not possible because the aim file generation (&00) is in the state
(&01) and (maybe) contains opened transactions.
(&01) = GENINUSE: In the generation was written.
(&01) = GENWAIT: The generation was waiting for the end of all trans.
(&01) = GENSWIT: The generation was in the switching routine.
Response
Execute warm start.
LEA2421
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2421 LEASY MAINTASK NOT SUITABLE FOR AUTOMATICALLY RECONSTRUCTION
Meaning
The reconstruction program cannot be executed because LEASY maintask
has not been started with the statement AUT=Y.
Response
Either start LEASY-MAINTASK again with AUT=Y or repeat the reconstruction
run without automatically reconstruction.
LEA2422
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2422 WARNING: COMMAND (&00) IGNORED BECAUSE OF AUTOMATIC RECONSTRUCTION
Meaning
The command (&00) is not allowed with automatically reconstruction.
The command will be ignored.
Response
E
LEA2423
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2423 WARNING: PARAMETER (&00) IN (&01) COMMAND IGNORED BECAUSE OF AUTOMATIC RECONST
Meaning
The parameter (&00) in (&01) command is not allowed with
automatically reconstruction. The parameter will be ignored.
LEA2424
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2424 WARNING: PARAMETER(S) IN (&00) COMMAND CHANGED BECAUSE OF AUTOMATIC RECONST:
Meaning
Because of automatically reconstruction parameters in the
(&00) command will be changed.
The message LEA2405 will show the changed parameter(s).
LEA2425
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2425 NO AIM FILE GENERATION FOR RECONSTRUCTION FOUND
Meaning
There is no AIM-FG found, that can be used for reconstruction.
Possible reasons:
1) TO-generationnumber less than FROM-generationnumber
2) The only one AIM-FG is in USE and the maintask is
running normal (USE=N)
Response
Correct input.
LEA2501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2501 NO CMMAIN FOR THIS LEASY DIRECTORY IN SYSTEM
Meaning
The selected common memory CMMAIN is not available or is no longer
available.
LEA2502
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2502 TRANSACTION (&00) IS ALREADY LOCKED
Meaning
The requested lock has already been set for the transaction (&00).
LEA2503
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2503 TRANSACTION IS LOCKED PERMANENTLY AND CANNOT SET UNLOCKED
Meaning
The transaction cannot be unlocked for reasons relating to the
system.
LEA2504
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2504 QUIET COMMAND IS NOT ACTIVE
Meaning
The system has to be put in the QUIET state by the QUIET function before
the AIMC/AIMW function is used.
LEA2505
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2505 THERE ARE ACTIVE TRANSACTIONS
Meaning
The AIMC function is only accepted when active transactions no longer
exist.
LEA2506
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2506 OWN TASK IS NOT MAIN MASTER TASK: UPDATE ON CMMAIN IS NOT ALLOWED
Meaning
The user is not authorized to alter the CMMAIN.
LEA2507
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2507 AIM FILE GENERATION SWITCHING NOT POSSIBLE. MAIN TASK NOT/NO LONGER ACTIVE OR STARTED WITHOUT AIM SAVING
Meaning
Further possible error:
MAINTASK is started by means of the operand USE=R and the
reconstruction is not yet finished.
Response
Check, whether the MAINTASK is active and has been started with the
correct
operands.
LEA2508
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2508 AIM FILE GENERATION SWITCHING IS ALREADY IN ACTION
Meaning
AIM file switching is rejected as long as an earlier switching routine
is still active.
LEA2509
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2509 REQUESTED TRANSACTION(S) NOT FOUND
Meaning
The requested transaction cannot be found in the transaction table.
LEA2510
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2510 INVALID SELECTION COMBINATION
Meaning
Invalid combination of specifications for the transaction identifier
(e.g.: *,*,*).
LEA2511
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2511 FILE (&00) IS ALREADY LOCKED
Meaning
The requested lock has already been set for the file (&00).
LEA2512
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2512 FILE (&00) IS MODEL OF MODEL GROUP
Meaning
The file (&00) is the model of a model file group; the function (&00)
(message LEA2513) cannot be set for this reason. The selected
function is valid only for instances of model file groups.
LEA2513
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2513 AND CANNOT BE LOCKED
Meaning
Second part of LEA2512.
LEA2514
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2514 FILE (&00) IS NOT M-FILE
Meaning
The selected file(s) is (are) not model file instance(s). The suffix
specification is invalid.
LEA2515
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2515 REQUESTED TASK SEQUENCE NUMBER NOT FOUND IN TASK TABLE
LEA2516
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2516 OWN TASK IS NOT MAIN MASTER TASK: ERASE OF AN AIM FILE GENERATION RESP. IOTASK IS NOT ALLOWED
Meaning
The user is not authorized to erase AIM file generations resp. IO-Tasks.
LEA2517
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2517 TRANSACTION (&00) IS ALREADY SET TO ROLLBACK
Meaning
The requested rollback has already been set for the transaction (&00).
LEA2518
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2518 TRANSACTION (&00) IS ALREADY LOCKED OR SET TO ROLLBACK
Meaning
The requested rollback or lock has already been set for the
transaction (&00).
LEA2519
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2519 FILE (&00) IS ALREADY UNLOCKED
Meaning
The requested unlock has alreday been set for the file (&00).
LEA2520
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2520 AND CANNOT BE UNLOCKED
Meaning
SECOND PART OF LEA2512.
LEA2521
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2521 TRANSACTION (&00) IS ALREADY UNLOCKED
Meaning
The requested unlock has already been set for the transcation (&00).
LEA2522
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2522 NO AIM FILE EXISTS
Meaning
There is no AIM file generation group relating to the selected LEASY
directory. Therefore deleting of file is not possible.
LEA2523
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2523 NO MEMORY POOL FOR IO TASKS IN SYSTEM
Meaning
A memory pool for IO tasks accordingly to the selected CMMAIN is not
available or is no longer available.
LEA2524
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2524 NO IO TASK ACTIV
Meaning
The command IOTE was entered. But there is no active IO-Task.
LEA2525
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2525 ERASE NOT POSSIBLE. GENERATION(S) NOT FREE.
Meaning
LEASY is running with automatic reconstruction of shadow files.
The specified generation(s) can not be erased because it (they)
is (are) not free.
Response
Use function AIMS to detect which generations are free.
LEA2526
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2526 DELETE NOT POSSIBLE. MAINTASK DOES NOT EXIST OR NOT READY
Meaning
AIM file generation can only be erased, if the MAINTASK is still active.
Further possible error:
The MAINTASK has been started my means of the operand USE=R and the
reconstruction has not yet finished.
Response
Start the MAINTASK or finish the reconstruction and try again the
erase attempt.
LEA2527
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2527 TERM NOT POSSIBLE, BECAUSE OF AIM-WRITING BY MAINTASK.
Meaning
Because AIM-Writing is done by Maintask, it is not allowed
to cancle the Maintask with TERM.
Response
Use CLOS or SHUT to terminate Maintask.
LEA2528
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2528 OWN TASK NOT MAIN MASTER TASK. INPUT IN RETURN CODE TABLE NOT ALLOWED
Meaning
The user is not authorized to enter a return code into the dump return
code
table.
Only the main master task is allowed to enter a return code.
LEA2529
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2529 MAXIMUM NUMBER OF RETURN CODES ALREADY REACHED
Meaning
It is not possible to add a return code, because the table is already
full.
LEA2530
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2530 SPECIFIED RETURN CODE UNKNOWN
Meaning
The specified return code is not known to LEASY.
LEA2531
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2531 SPECIFIED RETURN CODE ALREADY IN TABLE
Meaning
Addition of this return code is not possible, because it was already
entered in this session.
LEA2532
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2532 SPECIFIED RETURN CODE NOT FOUND IN TABLE
Meaning
Delete not possible, because return code cannot be found in return code
table.
LEA2533
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2533 NO RETURN CODE IN TABLE
Meaning
The desired function ( display or delete) cannot be executed.
LEA2534
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2534 AN ERROR OCCURRED DURING ROLLBACK PROCESSING OF TRANSACTION (&00)
Meaning
(&00) Session specific Transaction Number
LEA2535
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2535 RETURNCODE (&00) WAS ENTERED TO THE RETURNCODE-TABLE
LEA2536
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2536 RETURNCODE (&00) WAS ERASED FROM THE RETURNCODE-TABLE
LEA2537
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2537 FOR THIS RETURNCODE NO DUMP CAN BE GENERATED
LEA2538
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2538 LIST OF LOCK ELEMENTS IS LOCKED BY RUNTIME SYSTEM
Meaning
The lock elements can not be shown, because a new lock element is added
or
an existing lock element is deleted by the runtime system in this time.
Response
Select function SHLE once more.
LEA2539
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2539 ROLLBACK ERROR (&00) WITH FILE (&01)
Meaning
(&00) Rollback Errorcode
has the same meaning as the LEASY system Errorcode
(&01) filename
LEA2540
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2540 FILE (&00) NOT DEFINED IN COMMON MEMORY
Meaning
file (&00) was not found in the Common Memory
LEA2541
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2541 ROLLBACK NOT POSSIBLE. TRANSACTION (&00) WITHOUT BIM-LOGGING
Meaning
The Rollback for the transaction (&00) is not possible, because the
transaction is used without BIM-Logging.
(&00) Session specific transaction number
Response
Define transaction with BIM-Logging
LEA2542
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2542 THERE ARE NO PROTECTED AIM-FILE GENERATIONS.
Meaning
It was intended to unprotect one or more protected AIM-file-generations
with the utility LEASY-MASTER (function AIMA). But there are no
protected AIM-file-generations present.
Response
None.
LEA2543
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2543 File (&00) not defined in COMMON MEMORY or is an instance of a LEASY model file group
Meaning
In case of REPO/ROMS only defined files of the LEASY catalog
respectively the model in a model file group are allowed.
LEA2544
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2544 THERE ARE NO UNPROTECTED AIM-FILE GENERATIONS.
Meaning
It was intended to protect one or more unprotected AIM-file-generations
with the utility LEASY-MASTER (function AIMA). But there are no
unprotected AIM-file-generations present.
Response
None.
LEA2545
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2545 ONLY (&00) OF (&01) AIM-FILE GENERATIONS PROTECTED.
Meaning
It was intended to protect one ore more AIM-file-generations with
the utility LEASY-MASTER (function AIMA). But there are not as many
unprotected AIM-file-generations as specified ( (&00): number of
actually protected AIM-file-generations;(&01): intended number of
AIM-file-generations to protect ).
Response
None.
LEA2546
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2546 Given logical filename longer than 8 characters. Filename will be ignored.
LEA2550
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2550 SPECIFIED INPUT INVALID
Meaning
The specified return code is not known to LEASY.
LEA2551
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2551 DIAGNOSTIC AID (&00) HAS BEEN ACTIVATED
LEA2552
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2552 SPECIFIED DIAGNOSTIC AID IS ALREADY ACTIVATED
Meaning
Addition of this return code is not possible, because it was already
entered in this session.
LEA2553
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2553 ALL DIAGNOSTIC AIDS HAVE BEEN DEACTIVATED
LEA2554
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2554 DIAGNOSTIC AID (&00) HAS BEEN DEACTIVATED
LEA2555
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2555 SPECIFIED DIAGNOSTIC AID IS ALREADY DEACTIVATED
Meaning
Addition of this return code is not possible, because it was already
entered in this session.
LEA2601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2601 LEASY FILE TYP F CAN'T BE SAVED, BECAUSE FILE (&00) IS NOT SPECIFIED
Meaning
File (&00) of LEASY file type F cannot be saved as no DMS file has been
assigned to it by means of a ADD-FILE-LINK command.
LEA2602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2602 SAVE ON DISK REQUESTS SPECIFICATION OF DISK
Meaning
Disk has been specified as the storage medium, but no VSN has been
specified.
Response
Wait for prompt.
LEA2603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2603 SAVE ON DISK REQUESTS SPECIFICATION OF DEVICE
Meaning
Disk has been specified as the storage medium, but no device was
specified.
Response
Wait for prompt.
LEA2604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2604 SAVE OF A REMOTE DIRECTORY OR A DIRECTORY OF A FOREIGN USERID IS NOT ALLOWED
Response
Wait for prompt.
LEA2605
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2605 LEASY FILE (&00) (&01) CAN ONLY SAVED BY SYSTEM ADMINISTRATOR
Meaning
LEASY file (&00) with DMS name (&01) can only saved by a priviliged user.
LEA2606
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2606 SAVE OF LEASY FILE (&00) (&01) IS NOT POSSIBLE BY ARCHIVE
Meaning
The LEASY file (&00) with DMS name (&01) cannot be saved by the BS2000
ARCHIVE utility routine. Files on other userids than the
LEASY-SAVE userid cannot be saved by ARCHIVE, if LEASY-SAVE
doesn't run under $TSOS.
LEA2607
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2607 SAVE OF LEASY SHADOW FILES IS NOT POSSIBLE WITH (&00) PARAMETER (&01)
Meaning
The LEASY shadow files with parameter (&00) cannot be saved, as (&01)
either contains a :catid: or contains a $userid and LEA.SAVE is not
executing under a privileged user ID.
LEA2608
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2608 SAVE NOT ALLOWED, BECAUSE BIM FILE (&00) NOT EMPTY
Meaning
When checking the BIM files, it has been determined that file (&01) is
not empty.
Response
Roll back any open transactions by means of a warm start.
LEA2609
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2609 NO LEASY DIRECTORY OR INCONSISTENCY BETWEEN FILE NAME (&00) AND FOUND DIRECTORY NAME (&01)
Meaning
File (&00), which was opened on the basis of the name entered in response
to the message LEA0604, is not a LEASY directory, or the name found in
the identification record of the opened file differs from the DMS name.
LEA2610
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2610 SAVE OF A SECOND DIRECTORY ON TAPE(S) WITH SAME VSN(S) IS NOT ALLOWED
Meaning
Y has been entered in response to the message LEA0609, although the last
LEASY directory was saved to an explicitly specified tape (or tapes).
Response
Wait for prompt.
LEA2611
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2611 BIM-file (&00) is ambiguous in userid. LEASY-SAVE is terminated
LEA2612
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA2612 ONLINE saving is not allowed
Meaning
ONLINE saving with LEASY-SAVE is not allowed on behalf on
at least one of these problems:
1) Catalogue has ben created with shadow files (params CPS or CPC)
2) Not all files of the catalogue were selected at ROMS in LEASY-
MASTER or not all files in the catalogue are PAM or ISAM
masterfiles.
Response
Files , which have been transformed into readonly modus
must be saved with other mediums than LEASY-SAVE (COPY,Utility HSMS)
LEA2701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2701 ERROR: DIFFERENT INTERNAL VERSIONS
Meaning
The internal version of an already activ IO-Task is different from the own
version.
Response
Start IO-Task with equal version.
LEA2702
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2702 ERROR: INITALIZATION OF IO-TASK MEMORY-POOL NOT COMPLETED
Meaning
Intialization of common memory by another IO-Task is not completed
LEA2703
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2703 DIFFERENT OPERANDS WITH ACTIV IO-TASK
Meaning
One or more statements in this IO-Task are different from an already
Response
Start IO-Task with equal operands.
LEA2704
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2704 MAXIMUM NUMBER OF IO-TASK ALREADY STARTED
Meaning
There more IO-Task activated than spezified in *IOT statement.
LEA2705
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2705 LEASY MAINTASK FOR DIRECTORY (&00) NOT ACTIV.
Meaning
The LEASY maintask for directory (&00) is not activ in system.
LEA2706
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2706 FILE (&00) NOT IN LEASY DIRECTORY
Meaning
The file (&00), spezified in *OPF statement, cannot be found in LEASY
directory.
LEA2707
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2707 ERROR AT LEASY CALL (&00). DB-PARAMETER IS (&01). ERRORCODE OF LEASY RUNTIME SYSTEM IS (&02).
Meaning
During LEASY Call (&00) an error has occured. Details are provided
by the runtime system error code (&02) und DB operand (&01).
LEA2708
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2708 WARNING: MAXIMUM RECORDSIZE OF FILE (&00) IS (&01) AND IS GREATER THAN ARLEN (&02).
Meaning
In *ARL statement a movingsize from IO-Task to usertask is spezified that
is (&00), but the file (&00) has a maximum recordsize of (&02).
LEA2801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2801 FILE '(&00)' NOT CATALOGED IN LEASY DIRECTORY
Meaning
filename (&00) not found in present directory.
(&00): file name.
Response
Correct name of file resp. name of directory and retry
LEA2802
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2802 WARNING: DIRECTORY '(&00)' HAS ALREADY (&01)-FORMAT, NO CONVERSION
Meaning
The Directory has already the new format,
a conversion is not necessary.
(&00): name of directory.
(&01): KEY / NONKEY.
LEA2803
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2803 FILE '(&00)' NOT ON SAME USERID
Meaning
The file (&00) is not on the userid, where LEASY-CONVERT
was started, but this is necessary for a conversion.
(&00): file name.
Response
Start convert programm from the same userid.
LEA2804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2804 WARNING: INCONSISTENCE BETWEEN DIRECTORY AND FILE IN BLKCTRL-VALUE
Meaning
The value of BLKCTRL is not the same in the directory
and the file.
LEA2805
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2805 CONVERSION ONLY FOR ISAM FILES POSSIBLE
Meaning
In BS2000-version V9.5 only the conversion of ISAM files
is possible.
LEA2806
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2806 NO CONVERSION POSSIBLE. BS2000 VERSION < 9.5
LEA2807
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2807 OVERWRITE OF FILE '(&00)' NOT POSSIBLE
Meaning
Overwrite of file (&00) is not possible, because in
the CONVERT statement operand OVERWRITE is set to NO.
(&00): file name.
LEA2808
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2808 LEASY DIRECTORY NOT SPECIFIED
Meaning
In FIL-statement a cataloged file is given, but no catalog
is assigned previously.
LEA2809
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2809 BLKSIZE=(&00) OF FILE '(&01)' SMALLER THAN MINIMUM SIZE=(&02), NO CONVERSION
Meaning
The blocksize of the output file is too small for taking
the records of the input file.
(&00): Blocksize of the output file.
(&01): File name.
(&02): Minimum blocksize of output file.
Response
Enlarge the blocksize of the output file.
LEA2810
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2810 WARNING: RECORDS OF INPUT FILE '(&00)' SHORTED
Meaning
While converting KEY to NONKEY even the maximum blocksize
of the output file is not sufficient to take up the record
of the input file in their total length.
(&00): File name.
LEA2811
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2811 BLOCK IN PAM FILE '(&00)' CONTAINS X'FF' AS FIRST CHARACTER,NO CONVERSION
Meaning
While converting KEY to NONKEY a block is encountered in
a PAM file that contains X'FF' as first character. That
is the mark for erased blocks in NONKEY format.
(&00): File name.
Response
This PAM file can't be converted by LEASY-CONVERT.
LEA2812
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2812 WARNING: FILE '(&00)' HAS ALREADY (&01)-FORMAT, NO CONVERSION
Meaning
The file (&00) has already the new format,
a conversion is not necessary.
The SI file ist not converted too.
(&00): file name
(&01): KEY / NONKEY / 4K-NONKEY
LEA2813
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2813 WARNING: CONVERT-COMMAND IGNORED
Meaning
A CONVERT statement is only allowed as first statement.
LEA2814
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2814 CONVERSION OF FILE '(&00)' WITH BLKCTRL=NO NOT POSSIBLE
Meaning
(&00): file name.
LEA2815
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2815 SAME TAPE FOR IN- & OUTPUT-FILE '(&00)' NOT POSSIBLE
Meaning
(&00): file name.
LEA2816
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2816 ONE RECORD OF FILE '(&00)' > MAX. POSSIBLE RECORD-SIZE (&01)
Meaning
The maximum blocksize of the output file is not sufficient to
take up the records of the input file in their total length,
and shorting of records is not allowed (TRUNCATE = NO).
(&00): filename.
(&01): Maximum possible record-size of output file.
Response
Conversion of file only with record-shorting (TRUNCATE=YES)
possible.
LEA2817
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2817 BLOCK SIZE NOT EQUAL TO (STD,2) OR MULTIPLE OF IT
Meaning
When converting to 4K-NONKEY for the block size of the target file a value
not equal to (STD,2) or a multiple of it is explicitly specified or
SAME is given and the block size of the source file is not equal to
(STD,2) or a multiple of it.
LEA2818
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2818 WARNING: DIRECTION OF CONVERSION CHANGED TO 4K-NONKEY
Meaning
In the statement CONVERT the operand TO=NONKEY was specified, but the
target file is to put on a 4KF pubset.
LEA2819
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2819 WARNING: MAXIMUM RECORD SIZE OF THE INPUT FILE SHORTENED
Meaning
The maximum record size of the source file was determined implicitly from
the block size. The record size of the target file is reduced due to the
block size.
LEA2820
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA2820 NO CONVERSION OF ISAM FILE '(&00)' INTO 4K-NONKEY. BS2000 VERSION < V11
Meaning
Conversion of ISAM file (&00) into 4k-NONKEY format only in BS2000 V11
or greater version is possible.
(&00): file name.
LEA3001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3001 STRUCTURE ERROR ON FILE (&00) IN BLOCK STARTING WITH HALFPAGE NUMBER (&01) AT POSITION (&02)
Meaning
A structure error has been discovered in file (&00) in the block starting
with the PAM block number (&01) at position (&02).
Response
Generate diagnostic documentation and inform system administrator.
LEA3101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3101 BECAUSE RESET ROUTINE COULD NOT BE EXECUTED LOGICAL INCONSISTENCIES BETWEEN CATALOG FILE AND DATA FILES MAY APPEAR
Meaning
Due to errors which occured when updating the LEASY directory,
LEASY-CATALOG attempted to restore the old status. As errors
also occured during rollback, the status of the LEASY directory
is undefined.
Response
Inform LEASY administrator, and if necessary reconstruct directory
from system save file.
LEA3201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3201 SYSTEMERROR IN MAIN MODULE: SORTEXIT (&00) CALLED "(&01)" COULD NOT BE LOADED
Meaning
The system cannot be informed of the sort exit module for exit (&00) named
(&01) via a table macro.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3203 SYSTEMERROR IN MAIN MODULE: SORT COULD NOT BE LOADED
Meaning
The BS2000 SORT could not be loaded by the LEASY-LOADSI utility routine.
Response
Determine the identifier to which the BS2000 SORT belongs. Possibly assign
the library for the BS2000 SORT, for example, with SET-TASKLIB LIB=...
LEA3301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3301 SYSTEMERROR: AIM-FILE ADMINISTRATION IS IN AN INCONSISTENT STATE.
Meaning
The AIM-file administration is in an inconsistent state.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3302
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3302 SYSTEMERROR: THE AIM-FILE ADMINISTRATION CANNOT BE ACCESSED
Meaning
The AIM-file-administration cannot be accessed by LEASY-MAINTASK
because it is in use by another program.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3401 SYSTEM ERROR IN AIM FILE ACCESS MODULE: INVALID CALL FUNCTION CODE (&00)
Meaning
Incorrect call parameter (&00) in the read module for the AIM file.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3402 SYSTEM ERROR IN OPEN MODULE: FILE (&00) NOT FOUND IN COMMON MEMORY
Meaning
The file (&00), which were required when the error occurred, cannot be
found in the common memory.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3403 SYSTEM ERROR IN (&00) MODULE: REQUESTED FILE ID (&01) NOT FOUND IN FAST TABLE
Meaning
The file (&01) required at the time of the error cannot be found in an
internal table by module (&00).
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3404 SYSTEM ERROR IN TABLE ACCESS MODULE: UNDEFINED TABLE (&00) REQUESTED
Meaning
Access to (undefined) table (&00) requested in the table access module.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3405 SYSTEM ERROR IN TABLE ACCESS MODULE: OPEN FUNCTION WITH NULL ELEMENTS REQUESTED
Meaning
When opening a table in the table access module, zero has been specified
as the number of elements.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3406 SYSTEM ERROR IN TABLE ACCESS MODULE: CURRENT TABLE END ADDRESS FOR TABLE (&00) IS IN ERROR
Meaning
An invalid table end address for the table (&00) has been detected in
the table access module.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3407 SYSTEM ERROR IN TABLE ACCESS MODULE: DELETE FUNCTION FOR TABLE (&00) REQUESTED
Meaning
The erase of an internal table was requested in the table access module.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3408 SYSTEM ERROR IN TABLE ACCESS MODULE: UNDEFINED TABLE ACCESS FUNCTION (&00) REQUESTED
Meaning
The undefined function (&00) was requested in the table access module.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3409 SYSTEM ERROR IN TABLE ACCESS MODULE: UNDEFINED TABLE ACCESS MODE (&00) REQUESTED
Meaning
The undefined access mode (&00) was requested in the table access module.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3410 SYSTEM ERROR IN AIM FILE OPEN MODULE: TSN (&00) NOT FOUND IN USERID TABLE
Meaning
The TSN (&00) required at the time of the error cannot be found in an
internal table.
Response
Generate diagnostic documentation and inform LEASY maintenance.
LEA3411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3411 ERROR IN AIM FILE: FILENAME (&00) INVALID
Meaning
Executing an AIM OPEN entry an invalid filename was detected.
Response
Generate diagnostic information and inform LEASY maintenance.
LEA3412
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3412 ERROR IN AIM FILE: RECORD INVALID SHORTENED FOR FILE (&00)
Response
Generate diagnostic information and inform LEASY maintenance.
LEA3413
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3413 SYSTEM ERROR IN DESHORTENING MODUL: LENGTH PARAMETER IN ERROR
Response
Generate diagnostic information and inform LEASY maintenance.
LEA3414
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3414 ERROR IN MODULE (&00): (&01) NOT FOUND IN TABLE (&02).
Meaning
A LEASY internal table is wrong. The displayed search element
cannot be found.
Response
Generate diagnostic information and inform LEASY maintenance.
LEA3501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3501 NOT IMPLEMENTED ENLARGEMENT IN (&00)
Meaning
The version of the utility routine is not compatible with that of the
LEA.MAINTASK utility routine.
LEA3601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA3601 SYSTEMERROR IN ARCHIVE EXECUTE MODULE: CURRENT END ADDRESS OF ARCHIVE COMMAND LIST IS IN ERROR
Meaning
The current end address of the ARCHIVE statement list is to high.
Response
Generate diagnostic information and inform LEASY maintenance.
LEA4001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA4001 **** END OF FILE ON RDATA ****
Meaning
The EOF condition for SYSDTA has taken effect during input of control
data from a file.
Response
Complete input.
LEA4002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA4002 PERMANENT HARDWARE READ ERROR
Meaning
The RDATA macro has issued error code X"04".
Response
Inform system administrator.
LEA4003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA4003 INPUT DATA RECORD TOO LONG
Meaning
The RDATA macro has issued error code X"0C".
Response
Shorten input records.
LEA5P00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5P00 PASSWORD WAS SET FOR FILE (&00)
Meaning
(&00): filename.
LEA5001
Destination: USER-TASK, CONSOLE Routing code: U Weight: 30
Warranty : NO
LEA5001 VERIFY FOR FILE (&00) EXECUTED
Meaning
A VERIFY macro was issued when file (&00) was opened.
LEA5002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5002 SHADOW DIRECTORY NAME: (&00) SHADOW SUFFIX NAME: (&01)
Meaning
Specifications for generating the name of the shadow files as defined
with *CAT CPC = and CPS =.
LEA5003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5003 START OF AIM FILE GENERATION SWITCHING ON (&00) AT (&01)
Meaning
The program section for switching the AIM file generation has been
started at (&01) on (&00).
LEA5004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5004 AIM FILE GENERATION SWITCHING SUCCESSFUL
Meaning
AIM file generation switching has been carried out correctly.
LEA5005
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
LEA5005 AIM FILE GENERATION SWITCHING IN ERROR
Meaning
AIM file generation switching has not been carried out correctly.
Response
Check corresponding SYSLST protocol and analize the error by
interpreting the message, which was given before LEA5005
or inform yourself about condition of AIM generations by using
LEASY-MASTER
LEA5006
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
LEA5006 UNRECOVERABLE ERROR WITHIN AIM FILE SWITCHING ROUTINE
Meaning
An unrecoverable error has occurred within AIM switching routine.
The state of the AIM file generations is unpredictable.
Response
Verify status with /SHOW-FILE-ATTRIBUTES and the LEA.RECONST utility
routine and restore consistency by means of manual intervention.
LEA5007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5007 ERROR WITH FILE (&00). FILENAME OF SHADOW FILE CANNOT BE BUILD
Meaning
It is not possible to form a valid shadow file name for file (&00) with
the CPC and CPS entries of the *CAT statement in the LEASY-CATALOG
routine.
Response
Modify the CPC and CPS entries.
LEA5008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5008 ERROR WITH SHADOW FILE (&00). FILENAME TOO LONG TO BUILD SI-FILENAME
Meaning
The name of the shadow file is too long for "-SI" to be added.
Response
Shorten the CPS entry.
LEA5009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5009 (BUT ONLY WITH "REPAIR = NO")
Meaning
Second part of LEA5001.
LEA5010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5010 WARNING: AIM FILE (&00) CREATED WITH ONLY MINIMUM PRIMARY ALLOCATION
Meaning
While switching to the next AIM file generation a storage shortage was
detected. A second switch with minimum primary allocation was successful.
Response
If necessary ensure that there will be enough space by deleting other
files or switch to an AIM file generation located on an other disk.
LEA5011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5011 SWITCH NOT POSSIBLE. NO GENERATION FREE.
Meaning
A switch is not possible because there is no free AIM generation.
Response
None.
LEA5012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5012 THE CURRENT AIM-FILE GENERATION HAS REACHED ITS MAXIMAL SIZE.
Meaning
LEASY does not work with automatic reconstruction of shadowfiles and
either the current AIM-file-generation has reached its maximal possible
size or LEASY-MAINTASK could not switch the AIM-file-generation on
reaching the size specified in the parameter AIS because there are no
unprotected AIM-file-generations or switching of the AIM-file-generation
is not possible because the increment specified in the MAINTASK-parameter
AIS has the value zero. Therefore it is no longer possible to write in
the current AIM-file-generation and because of this no LEASY-operations
which would to write in the AIM-file can be performed by LEASY.
Response
The LEASY-administrator has to unlock with the function AIMA of the
utility LEASY-MASTER one or more of the oldest AIM-file-generations.
At the same time LEASY-MASTER triggers the switching of the
AIM-file-generation. After that LEASY-operations which need to
write in the AIM-file can be performed again by LEASY.
LEA5013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5013 THERE ARE NO FILES MARKED FOR ROMS.
Meaning
There are no files marked for ROMS in the LEASY catalog.
Response
If it is intended to run an online-backup with the utility LEASY-SAVE,
all files in the LEASY-catalog have to be marked for ROMS and before
the start of an online-backup with the utility LEASY-SAVE the
READONLY-mode has to be set with the function ROMS of the utility
LEASY-MASTER for all files in the LEASY-catalog.
LEA5014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5014 Begin of diagnose messages
Meaning
Begin of diagnose messages. The following messages are written to SYSOUT,
for writing in LEADIAG is impossible. Either LEASY-MAINTASK for a
LEASY-Catalogue is not started or an writing error on LEADIAG has
occurred.
LEA5015
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5015 End of diagnose messages
Meaning
End of diagnose messages to SYSOUT
LEA5101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5101 LAST SESSION: NUMBER = (&00), DATE = (&01), TIME = (&02).
Meaning
The user entered INF = Y to request output of information on the last
LEASY session. The session last generated was number (&00) and was
started on (&01) at (&02) hours.
LEA5102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5102 ****** NO SESSION CREATED ******
Meaning
No session has yet been generated for the LEASY directory specified
(LEASY-MAINTASK has not yet been started).
LEA5103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5103 MISSING CHARACTERISTICS OF EXISTING FILE. FILE CANNOT BE CATALOGED IN LEASY DIRECTORY
Meaning
MODE = CATALOG was used to attempt to import a file into the LEASY
directory. The TSOS directory does not however contain any file attributes
for this file.
Response
Use SHOW-FILE-ATTRIBUTES to check the attributes and correct the error.
LEA5104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5104 LEASY DIRECTORY NOT ERASED
Meaning
The user wished to erase a directory with file entries. He responded to
LEA2118 with "N" or an invalid entry. The directory was not erased.
LEA5105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5105 DMS FILENAMES WITH CATID
Meaning
DMS functions are called with full qualified file names.
LEA5106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5106 DMS FILENAMES WITHOUT CATID
Meaning
DMS functions are called with file names without catid.
LEA5107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5107 ROM = YES IS SPECIFIED
LEA5108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5108 ROM = NO IS SPECIFIED
LEA5109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5109 THE LEASY CATALOG CONTAINS NO FILES WITH AIM=Y ODER AIM=R.
Meaning
In the LEASY-catalog there is at least one file with a LEASY-filetype
unequal to modelfile, marked for automatic reconstruction of shadowfiles
(AIM=(Y,A) or AIM=(R,A) in the FIL-statement), but there are no files,
for which AIM=Y or AIM=R has been specified. Therefore there is no danger
of loss of AIM-filedata, if automatic reconstruction of shadowfiles is
requested (if there were to be files in the LEASY-catalog, for which
AIM=Y or AIM=R had been specified in the FIL-statement, the data saved in
an AIM-file-generation for these files would be lost, when LEASY-RECONST
unprotects the AIM-file-generation after processing it).
Response
None.
LEA5110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5110 THERE ARE FILES MARKED FOR USE WITH AUTOMATIC RECONSTRUCTION.
Meaning
In the LEASY-catalog there is at least one file with a LEASY-filetype
unequal to modelfile, marked for automatic reconstruction of shadowfiles
(AIM=(Y,A) or AIM=(R,A) in the FIL-statement). If there are as well files
with AIM=Y or AIM=R in the FIL-statement, then there exists the danger of
loss of AIM-filedata, if automatic reconstruction of shadowfiles is
requested. The files, for which the danger of loss of AIM-filedata
exists, will be listed subsequently (see message LEA5112).
Response
For the files, for which AIM=Y oder AIM=R has been specified in the
FIL-statement, this should be changed to AIM=N, AIM=(Y,A) or AIM=(R,A).
LEA5111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5111 THERE ARE NO FILES MARKED FOR USE WITH AUTOMATIC RECONSTRUCTION.
Meaning
In the LEASY-catalog there are no files with a LEASY-filetype unequal
to modelfile, marked for automatic reconstruction of shadowfiles
(AIM=(Y,A) or AIM=(R,A) in the FIL-statement). Therefore there is no
danger of loss of AIM-file-data for files with AIM=Y or AIM=R in the
FIL-statement, if automatic reconstruction of shadowfiles is requested.
Response
None.
LEA5112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5112 FOR THE FOLLOWING FILES AIM=Y OR AIM=R HAS BEEN SPECIFIED:
Meaning
For the files with a LEASY-filetype unequal to modelfile listed after
this message, AIM=Y or AIM=R has been specified. Because there are at
the same time files marked for automatic reconstruction of shadowfiles
(AIM=(Y,A) or AIM=(R,A) in the FIL-statement, see preceeding message
LEA5110), there is the danger of loss of AIM-file-data for the
subsequently listed files, if automatic reconstruction of shadowfiles
is requested.
Response
None.
LEA5201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5201 SORT ABORTED BECAUSE OF SERIOUS ERROR
Meaning
Sort run aborted due to error in SORT. The error responsible was output
by SORT prior to this message.
Warning: The SI file may already be partially created.
Response
Wait for prompt.
LEA5202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5202 SORT ABORTED BECAUSE OF SERIOUS ERROR WHILE ACCESS TO PRIMARY OR SECONDARY INDEX FILE
Meaning
Sort run aborted due to a DMS error while accessing the primary or
SI file or a logical error during SORT exit routines. The error involved
was output by the SORT exit routine prior to this message.
Warning: The SI file may be only partially created.
Response
Wait for prompt.
LEA5203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5203 STRUCTUR ERROR ON PRIMARY PAM FILE (&00) IN BLOCK STARTING WITH HALFPAGE NUMBER (&01)
Meaning
A structure error has been detected in the data block beginning with
PAM block number (&01) while reading the primary file (&00).
Response
Check the file structure.
LEA5204
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5204 LAST PAGE POINTER OF PRIMARY FILE (&00) DOES NOT REFER TO END OF BLOCK
Meaning
The last page pointer has to be a multiple of the block size.
(&00): Name of primary file.
Response
Please check the last page pointer of the specified file and change it to
a valid value.
LEA5301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5301 VIRTUAL MEMORY OVERFLOW
Meaning
The virtual memory space is exhausted.
Response
Inform system administrator.
LEA5302
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5302 *** WARM/COLD START FINISHED WITH ERROR ***
Meaning
Errors have been detected during a warm or cold start.
Response
Correct error, repeat run.
LEA5303
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5303 WARM/COLD START SUCCESSFUL
Meaning
The warm or cold start has been terminated without error.
LEA5304
Destination: USER-TASK, CONSOLE Routing code: U Weight: 30
Warranty : NO
LEA5304 *LEASY MAINTASK (&00) INITIALIZATION COMPLETED
Meaning
All statements have been processed. The MAINTASK of the directory (&00)
is ready for the LEASY runtime system and enters a wait state.
LEA5305
Destination: USER-TASK, CONSOLE Routing code: U Weight: 70
Warranty : NO
LEA5305 *LEASY MAINTASK (&00) INITIALIZATION FINISHED WITH ERROR*
Meaning
At least one error has been detected in the operand check for the MAINTASK
of the directory (&00) during generation of the common memory CMMAIN.
The program is terminated.
Response
Correct error and repeat run.
LEA5306
Destination: USER-TASK, CONSOLE Routing code: U Weight: 30
Warranty : NO
LEA5306 *LEASY MAINTASK (&00) READY FOR RECONSTRUCTION*
Meaning
All statements have been processed. The common memory CMMAIN is ready
for after-image reconstruction and enters a wait state.
LEA5307
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5307 NEW LEASY SESSION CREATED: SESSION NUMBER = (&00), DATE = (&01), TIME = (&02)
Meaning
The new LEASY session just created has session number (&00) and was
created on (&01) at (&02) hours.
LEA5308
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5308 READY FOR PETR HANDLING
Meaning
A warm start is executed for suspended transactions.
LEA5309
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5309 WARM START WITH PETR HANDLING SUCCESSFUL
Meaning
A warm start for suspended transactions has been successfully completed.
LEA5310
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5310 WARM START WITH PETR HANDLING FINISHED WITH ERRORS
Meaning
A warm start for suspended transactions has been terminated with errors.
LEA5311
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5311 AUTOMATIC RECONSTRUCTION ONLY WITH LOG=Y,M
Meaning
Automatic reconstruction (AUT=Y) is only allowed for
maintask-written AIM-records.
Response
Change LOG-instruction and repeat maintask-run.
LEA5312
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5312 AIM-FILE-GENERATION IS NOT IN A CONSISTENT CONDITION.
Meaning
AIM-file generations are not included in shadow-files
(old session was started with automatic reconstruction,
new session without).
Response
Start Maintask with AUT=Y and REN-Instruction.
LEA5313
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5313 REN-INSTRUCTION MISSING.
Meaning
AUT=Y requires a following REN-instruction.
Response
start maintask with AUT=Y and REN-instruction.
LEA5314
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5314 USE=R WITH AUT=Y NOT ALLOWED
Meaning
Maintask for reconstruction (USE=R) and automatic reconstruction
of shadow-files (AUT=Y) not allowed
Response
Start maintask without AUT=Y
LEA5315
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5315 SESSION (&00) FINISHED CONSISTENT
Meaning
(&00): Session-Number
The Session No. (&00) was finished consistent.
LEA5316
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5316 SESSION (&00) COULD NOT BE FINISHED CONSISTENT
Meaning
Errors were detected during rollback.
The session could not be finished consistent.
(&00): Number of session
Response
Correct error and restart Maintask with USE=C.
LEA5317
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5317 USE=C: ROLLBACK INITIATED FOR TRANSACTION (&00)
Meaning
(&00): Session-specific transaction-number
LEA5318
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5318 PARAMETER AGF IGNORED.
Meaning
The MAINTASK-parameter AGF will be ignored because the value of the
MAINTASK-parameter AGE is smaller than the maximal possible value
255. Therefore no AIM-file-generations will be unprotected.
Response
None.
LEA5319
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5319 NEW VALUE OF PARAMETER AGE (= (&00)) LESS THAN OLD VALUE (= (&01)) BUT NOT ENOUGH UNPROTECTED FILE GENERATIONS.
Meaning
The new value of the MAINTASK-parameter AGE is smaller than the value
specified in the last session, but there are not enough unprotected
AIM-file-generations. The start of LEASY-MAINTASK will therefore be
aborted.
Response
If the value of the MAINTASK-parameter AGE is smaller than 255,
then increase the value of the MAINTASK-parameter AGE and start
LEASY-MAINTASK again. If the value of the MAINTASK-parameter AGE
is equal to 255 and LEASY-MAINTASK still cannot be started, then
there is the possibility to unprotect one or more protected
AIM-file-generations at the start of LEASY-MAINTASK by specification
of the MAINTASK-parameter AGF=n.
LEA5320
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5320 PARAMETER AGF GIVEN AND AUTOMATIC RECONST REQUESTED; PARAMETER AGF IGNORED.
Meaning
The MAINTASK-parameter AGF has been specified and automatic
reconstruction of shadowfiles has also been requested (MAINTASK-parameter
AUT=Y). The MAINTASK-parameter AGF will be ignored because it is only of
relevance, if the automatic reconstruction of shadowfiles has not been
requested.
Response
None.
LEA5321
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5321 PARAMETER ASP GIVEN BUT NO UNPROTECTED AIM-FILE GENERATION EXISTING.
Meaning
The MAINTASK-parameter ASP has been specified. Therefore LEASY-MAINTASK
should switch to a new AIM-file-generation at the start. But switching
was impossible because there was no unprotected AIM-file-generation.
Therefore the start of LEASY-MAINTASK has been aborted.
Response
Increase the value of MAINTASK-Parameter AGE and start LEASY-MAINTASK
again. If automatic reconstruction of shadowfiles is not requested
(MAINTASK-parameter AUT=N), there is also the possibility to unprotect
one or more protected AIM-file-generations at the start of
LEASY-MAINTASK by specification of the MAINTASK-parameter AGF=n.
LEA5322
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5322 THE AIM-FILE ADMINISTRATION IS CURRENTLY USED BY LEASY-MASTER. SWITCHING OF AIM-FILE NOT POSSIBLE.
Meaning
According to the value of the MAINTASK-parameter AIS LEASY-MAINTASK
should switch to a new AIM-file-generation. But this is not possible
at the moment because the AIM-file-administration is currently in use
by LEASY-MASTER. Switching to a new AIM-file-generation will be
accomplished later.
Response
None.
LEA5330
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5330 Warning: AIM=Y is set to AIM=N for file (&00)
Meaning
File (&00) is a foreign or a temporary file
and AIM=Y is set. LEASY-RECONST cannot work
with this file. AIM=N is set.
Response
Define AIM=N for file (&00) with LEASY-CATALOG
LEA5401
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5401 AIM FILE (&00) IS EMPTY
Meaning
The AIM file is empty.
Response
If necessary repeat reconstruction run with correct AIM generation.
LEA5402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5402 VALIDATION FINISHED. RECONSTRUCTION STARTING NOW.
Meaning
The LEA.RECONST utility routine executes with the TRA=V mode. All AIM
records are checked wether they are guilty or not. Now the guilty
records are reconstructed.
LEA5403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5403 FOLLOWING PARAMETERS ARE RESET:
Meaning
This message follows the message LEA5402. For reconstruction it is
necessary to change the following parameters.
LEA5404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5404 *MOD TRANSACTIONS = (&00). WARNING: NO AIM SESSION RECORD FOUND
Meaning
No session entry has been found in the specified AM generations while
reconstructing with *MOD TRANSACTIONS = (&00).
Response
Repeat run with all AIM generations if not all of them were processed.
LEA5405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5405 *MOD TRANSACTIONS = (&00). WARNING: FOR FOLLOWING TRANSACTIONS NEITHER AIM OPTR RECORD NOR AIM CLTR RECORD FOUND
Meaning
Neither CLTR nor OPTR entries were found for the listed transactions while
reconstructing with *MOD TRANSACTIONS = (&00).
Response
Repeat run with all AIM generations if not all of them were processed.
LEA5406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5406 AIM UPDATE RECORD FOUND WITHOUT PRECEDING AIM FILS RECORD OR AIM OPEN RECORD
Meaning
Neither a FILS nor an OPEN entry has been found prior to the first AIM
update entry.
Response
Start reconstruction with an AIM file with a lower generation number.
LEA5407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5407 MAYBE AIM FILE STILL OPENED BY A TRANSACTION OF RUNNING APPLICATION
Meaning
The AIM file is probably still open via a transaction of an ongoing
application.
LEA5408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5408 .................(&00)............(&01)
Meaning
Second part of LEA5405.
LEA5409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5409 NO FILES FOR AUTOMATIC RECONSTRUCTION.
Meaning
The tables of CMMAIN contain no files which are automatically
to reconstruct.
Response
If necessary change the file attributes with LEASY-CATALOG and start
the application again.
LEA5410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5410 THE AUTOMATIC RECONSTRUCTION CANNOT BE STARTET, BECAUSE THE AIM-FILE ADMINISTRATION IS AT THE MOMENT IN USE BY ANOTHER PROGRAM.
Meaning
The automatic reconstruction of shadow files cannot be startet at
the moment, because the AIM-file administration is at the moment
in use by another program. Normally the automatic reconstruction
of shadow files will be executed later.
Response
If this message is frequently displayed, please generate diagnostic
documentation and inform LEASY maintenance.
LEA5411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5411 THE AIM-FILE ADMINISTRATION CANNOT BE UPDATED, BECAUSE THE AIM-FILE ADMINISTRATION IS AT THE MOMENT IN USE BY ANOTHER PROGRAM.
Meaning
LEASY-RECONST has finished the processing of one or more
AIM-file-generation. The AIM-file administration is at the moment
in use by another program and cannot therefore be updated. The
AIM-file-generations cannot be released. Normally these
AIM-file-generations will be released later
Response
If this message is frequently displayed, please generate diagnostic
documentation and inform LEASY maintenance.
LEA5501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5501 AIM FILE(S) (BEFORE/AFTER) (&00) ERASED
Meaning
The specified AIM file generation group resp. the specified generation
were erased.
LEA5502
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5502 TERMINATION OF AN IO TASK INITIATED
Meaning
The termination of an IO task is initiated.
LEA5503
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5503 NO LOCKED RECORDS
LEA5504
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5504 ROLLBACK OF TRANSACTION (&00) IN ACTION
Meaning
(&00) Session specific Transaction Number
LEA5505
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5505 ROLLBACK OF TRANSACTION (&00) PROCESSED
Meaning
(&00) Session specific Transaction Number
LEA5506
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5506 NO FILES SELECTED FOR FUNCTION (&00)
Meaning
For the function REPO respectively ROMS no files have been selected.
Response
Go to the input mask for the file selection of the function REPO
respectively ROMS and add one or more files to the list of selected files.
LEA5507
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5507 THE ASSOCIATED SHADOW FILE FOR FILE (&00) IS NOT TO BE UPDATED AUTOMATICALLY
Meaning
The file (&00) cannot be processed by the function REPO because
automatic update has not been specified for this file.
LEA5508
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5508 FILE (&00) NOT IN THE LIST OF SELECTED FILES
Meaning
The file (&00) is not a member of the list of selected files for the
function REPO respectively ROMS and can therefore not be removed from
this list.
Response
Enter a filename which is a member of the list of selected files for the
function REPO respectively ROMS.
LEA5509
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5509 FUNCTION REPO NORMALLY TERMINATED
Meaning
The function REPO has been normally terminated. All files selected for
the function REPO together with the corresponding SI-files, if
existing, have been replaced by the corresponding shadow files.
LEA5510
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5510 FUNCTION REPO NOT COMPLETELY ACCOMPLISHED
Meaning
The function REPO could not be completely accomplished. Not all files
selected for the function REPO or the corresponding SI-files could be
replaced by the corresponding shadow files. The reason why some files
could not be replaced is indicated by the preceeding messages.
Response
If possible remove the cause, why some files could not be replaced and
call the function REPO for those files again.
LEA5511
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5511 FUNCTION (&00) ABORTED
Meaning
The function REPO respectively ROMS has been aborted. None of the
original files have been replaced by their corresponding shadow
files. The reason for the abort of the function REPO respectively
ROMS is indicated by the preceeding messages.
Response
If possible remove the cause for the abort of the function REPO
respectively ROMS and call the function REPO respectively ROMS again.
LEA5512
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5512 FUNCTION ROMS NORMALLY TERMINATED
Meaning
The function REPO has been normally terminated. For all files selected
for the function ROMS the READONLY-mode has been set, that means, all
files are in a consistent state and can subsequently be saved online.
The user job variable *LEACMST contains the ROMS-state 'READY'.
Response
Start the saving of the files by checking the state of the job variable,
in order not to block the files longer than necessary. After saving the
files the READONLY-mode should be reset immediately by calling the
function ROMR.
LEA5513
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5513 FUNCTION ROMR NORMALLY TERMINATED.
Meaning
The function ROMR has been normally terminated. For none of the files
in the LEASY-catalog the READONLY-mode is set. None of the files can
be saved online. The user job variable *LEACMST contains the ROMS-state
'END'
Response
None.
LEA5514
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA5514 Function ROMS not completely accomplished
Meaning
The function ROMS could not be completely accomplished. Not all
files selected for the function ROMS are in READONLY state.
The reason why some files could not be set in READONLY state
is indicated by the preceeding messages.
Response
If possible remove the cause, why some files could not be set
into READONLY state and call the function ROMS for those files again.
LEA5515
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5515 THERE ARE STILL OPEN TRANSACTIONS AFTER THE END OF THE WAITING TIME
Meaning
The function REPO respectively ROMS has been aborted due to the
regulations selected by the LEASY-administrator, because not all
transactions concerning the function REPO respectively ROMS have
been finished by the end of the waiting time.
LEA5518
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5518 ABNORMAL TERMINATION OF FUNCTION ROMR.
Meaning
The function ROMR has been terminated abnormally. Possible reasons:
the READONLY-mode (function ROMS) has not been set or is not set
any longer or the utility LEASY-SAVE has not yet finished the
currently running online backup.
Response
None.
LEA5519
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5519 FUNCTION REPO ONLY ALLOWED WHEN AUTOMATIC RECONSTRUCTION IS RUNNING
Meaning
The function REPO is only allowed if the LEASY-session has been
started with the automatic reconstruction of shadow files, that
means with the maintask parameter AUT=Y.
LEA5520
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5520 FILE (&00) NOT EARMARKED FOR FUNCTION ROMS BY LEASY-CATALOG
Meaning
The selected file cannot be considered by the function ROMS, because the
selected file has not been earmarked for the function ROMS by
LEASY-CATALOG.
Response
Enter a filename which has been earmarked for the function ROMS by
LEASY-CATALOG.
LEA5521
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5521 TRANSACTION (&00) NOT YET FINISHED
Meaning
During the execution of the function REPO respectively ROMS the
transaction (&00) is still open after the end of waiting time. One
or more following messages LEA5522 specify which files belong to
the open transaction.
LEA5522
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5522 THERE IS STILL AT LEAST ONE TRANSACTION OPEN FOR FILE (&00)
Meaning
During the execution of the function REPO respectively ROMS there is
still a transaction open for the file (&00) at the end of waiting time.
To which transaction the file belongs is specified by the preceeding
message LEA5521.
LEA5523
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5523 NO FILE COULD BE PROCESSED WITH FUNCTION (&00)
Meaning
At the start of the function REPO respectively ROMS 'I' has been
specified as the reaction if there are open transactions at the
end of the waiting time. After the end of waiting time there is at
least one transaction open for each file selected for the function
REPO respectively ROMS . Therefore no file could be processed.
LEA5524
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5524 FILE (&00) NOT HANDLED BECAUSE THERE ARE ONE OR MORE FILES OF THE TA WITHOUT BIM-LOGGING
Meaning
For the function REPO respectively ROMS 'B' has been specified as the
reaction if there are open transactions at the end of waiting time.
During the execution of the function REPO respectively ROMS one or
more transactions had to be reset after the end of waiting time.
The file (&00) was involved in the resetting of a transaction.
Because there is no BIM-logging specified for file (&00), the
file will not be processed.
LEA5525
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5525 NO FILES EARMARKED FOR FUNCTION ROMS BY LEASY-CATALOG
Meaning
The function ROMS has been aborted, because no files have been earmarked
for the function ROMS by the utility LEASY-CATALOG.
LEA5528
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5528 INPUT FOR FILE SELECTION FOR THE FUNCTION (&00) IS INVALID
Meaning
The input for the file selection of the function REPO respectively ROMS
is invalid.
Response
Please enter a correct value ('A', 'R' or 'E').
LEA5529
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5529 THE TRANSACTION ADMINISTRATION IS AT THE MOMENT IN USE BY ANOTHER PROGRAM. PLEASE TRY AGAIN LATER.
Meaning
The transaction administration is at the moment in use by
another program. Therefore the transaction tables cannot
be processed by LEASY-MASTER.
Response
Please try function again later.
LEA5530
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5530 ALL FILES ASSOCIATED WITH THE TRANSACTION (&00) ARE WITHOUT BIM-LOGGING
Meaning
For the function REPO respectively ROMS 'B' has been specified as
the reaction if there are open transactions at the end of the
waiting time and all files belonging to the transaction (&00) are
without BIM-logging. Therefore none of these files can be processed
during the execution of the function REPO respectively ROMS. The names
of the files are indicated by the following messages LEA5532.
LEA5531
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5531 THE FOLLOWING FILES ASSOCIATED WITH THE TRANSACTION (&00) ARE WITHOUT BIM-LOGGING
Meaning
For the function REPO respectively ROMS 'B' has been specified as the
reaction if there are open transactions at the end of the waiting time
and some of the files belonging to the transaction (&00) are without
BIM-logging. Therefore none of these files can be processed during the
execution of the function REPO respectively ROMS. The names of the files
are indicated by the following messages LEA5532.
LEA5532
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5532 FILE (&00) WITHOUT BIM-LOGGING
Meaning
The file (&00) is without BIM-logging and can therefore not be processed
during the execution of the function REPO respectively ROMS. The
preceeding message LEA5530 or LEA5531 indicates, which transaction
is associated with this message.
LEA5533
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5533 NOT ALL OF THE FILES ASSOCIATED WITH THE TRANSACTION (&00) ARE OPEN IN SHAREUPD-MODE
Meaning
Not all of the files associated with the transaction (&00) are open in
SHAREUPD-mode. Therefore the transaction (&00) cannot be reset during
the execution of the function REPO respectively ROMS. This means that
none of the files associated with the transaction can be processed by
the function REPO respectively ROMS. Which files are associated with the
transaction is indicated by the following messages LEA5534.
LEA5534
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5534 FILE (&00) WILL NOT BE PROCESSED
Meaning
The file (&00) cannot be processed by the function REPO respectively
ROMS, because not all files associated with the same transaction which
processes the file (&00) are open in SHAREUPD-mode. Which transaction
is the one in question is indicated by the preceeding message LEA5533.
LEA5535
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5535 THE FOLLOWING TRANSACTIONS COULD NOT BE TERMINATED WITHIN THE GIVEN WAITING TIME
Meaning
One or more transactions have not yet finished in the given waiting time
or could not be reset by the function REPO respectively ROMS. Which
transactions are still open is indicated by the following messages
LEA5521.
LEA5536
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5536 FILE (&00) COPIED
Meaning
The shadow file of the file (&00) has been copied to the original
file during the execution of the function REPO.
LEA5537
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5537 ERROR WHEN CLOSING THE SHADOW FILE BELONGING TO THE FILE (&00), DMS-ERROR (&01)
Meaning
The DMS-error (&01) occured during closing the shadow file of file
(&00). Therefore the shadow file could not be copied to the original
file.
Response
If possible remove the cause of the DMS-error and call the function
REPO for this file again.
LEA5538
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5538 ERROR WHEN COPYING THE FILE (&00), DMS-ERROR (&01)
Meaning
The DMS-error (&01) occured during copying the shadow file of file (&00)
to the original file. Therefore the shadow file has not been copied to
the original file.
Response
If possible remove the cause of the DMS-error and call the function
REPO for this file again.
LEA5539
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5539 DUE TO AN ERROR IN LEASY-RECONST NO FILES COULD BE COPIED BY THE FUNCTION REPO.
Meaning
An error occured in the LEASY-RECONST utility (please have a look at
the errormessages given by LEASY-RECONST). Therefore no shadowfiles
could be copied to the corresponding originalfiles by the function
REPO because the shadowfiles are possibly in an inconsistent state.
Response
None.
LEA5540
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5540 THE AIM-FILE ADMINISTRATION IS AT THE MOMENT IN USE BY ANOTHER PROGRAM. PLEASE TRY AGAIN LATER.
Meaning
The AIM-file-administration is at the moment in use by
another program. Therefore LEASY-MASTER cannot make any
changes on the AIM-file-administration.
Response
Please try function again later.
LEA5541
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5541 AIM-FILE ADMINISTRATION SUCCESSFULLY CHANGED.
Meaning
The AIM-file administration has been successfully changed and has been
written back to the LEASY-catalog.
Response
None.
LEA5542
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5542 ABNORMAL TERMINATION OF FUNCTION AIMA. AIM-FILE ADMINISTRATION REMAINS UNCHANGED.
Meaning
The function AIMA could not be processed correctly. A hint to the reason
of the error may be given by a possibly following message LEA7001. The
AIM-file administration remains unchanged.
Response
If possible remove the reason for the error and try the function AIMA
again later.
LEA5543
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5543 FUNCTION AIMA NORMALLY TERMINATED. AIM-FILE ADMINISTRATION REMAINS UNCHANGED.
Meaning
The input of the LEASY administrator did not involve any changes in the
AIM-file administration.
Response
None.
LEA5544
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5544 WARNING: PROTECTED AIM-FILE-GENERATIONS HAVE BEEN DELETED.
Meaning
When deleting AIM-file-generations with the LEASY-MASTER-function AIME
there were less unprotected AIM-file-generations than have been
actually deleted. Therefore one ore more protected AIM-file-generations
have been deleted too.
Response
None.
LEA5546
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5546 THE FILE (&00) IS A TEMPORARY FILE, a foreign file, a model file or a DAM/SAM master file AND CANNOT BE PROCESSED BY THE FUNCTION REPO RESPECTIVELY ROMS.
Meaning
During the file selection of the function REPO respectively ROMS
file (&00) has been specified. This file is either a temporary file,
a foreign file , a model file or a DAM/SAM master file. It cannot be
processed by the function REPO respectively ROMS ans will therefore
be ignored.
Response
None.
LEA5548
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5548 NOT ALL OF THE FILES PROCESSED BY THE FUNCTION (&00) ARE OPEN IN SHAREUPD-MODE
Meaning
Not all of the files processed by the function (&00) are open in
SHAREUPD-mode. Therefore none of these files can be processed by
the function REPO respectively ROMS. Which files are not in SHAREUPD-mode
is indicated by the following messages LEA5534.
LEA5601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5601 NORMAL TERMINATION OF ARCHIVE
Meaning
The generated statements have been successfully processed by ARCHIVE.
LEA5602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5602 NORMAL TERMINATION OF ARCHIVE WITH WARNINGS
Meaning
Warning messages have been issued, but this has not prevented the
generated statements from being executed.
Response
Check whether the desired save operation has been performed.
LEA5603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5603 NORMAL TERMINATION OF ARCHIVE WITH ERRORS
Meaning
ARCHIVE has detected an error, but this has not prevented the
generated statements from being executed.
Response
Check whether ARCHIVE has executed the desired save operation, and
correct the input if necessary.
LEA5604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5604 ABNORMAL TERMINATION OF ARCHIVE
Meaning
ARCHIVE has detected an error, and execution of the generated
statements has been aborted.
Response
Correct the error with the aid of the ARCHIVE messages.
LEA5605
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5605 ABNORMAL TERMINATION OF ARCHIVE: EXECUTION NOT STARTED!
Meaning
ARCHIVE has detected an error, and execution of the generated statements
has not started.
Response
Correct the error with the aid of the ARCHIVE messages.
LEA5606
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5606 ERROR WHILE LOADING ARCHIVE OR ARCHIVE NOT AVAILABLE
Meaning
A error has occurred while loading ARCHIVE or ARCHIVE is not available.
Response
Inform the system administrator.
LEA5607
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5607 THE FUNCTION ROMS OF THE UTILITY LEASY-MASTER WAS NOT PROCESSED.
Meaning
Before the start of an online-backup with the utility LEASY-SAVE
all files of the LEASY-catalog have to be put into READONLY-mode.
But the function ROMS has not been processed at all or not properly
or the READONLY-mode has already been removed by the call of the
function romr.
Response
Set with the function ROMS of the utility LEASY-MASTER all
files of the LEASY-catalog to READONLY-mode and start
LEASY-SAVE again.
LEA5608
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5608 THERE ARE NOT ALL FILES IN READONLY-MODE FOR THE ONLINE-BACKUP WITH LEASY-SAVE.
Meaning
An online-backup with the utility LEASY-SAVE is only possible if
all files in the LEASY-catalog are in READONLY-mode.
Response
Set with the function ROMS of the utility LEASY-MASTER all
files of the LEASY-catalog to READONLY-mode and start
LEASY-SAVE again.
LEA5704
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5704 *LEASY IO-TASK (&00) INITIALIZATION COMPLETED*
Meaning
All statements have been processed. The IO-Task of the directory (&00) is
ready and enters a wait state.
LEA5705
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5705 *LEASY IO-TASK INITIALIZATION FINISHED WITH ERROR*
Meaning
At least one error has been detected in the operand check for the IO-Task
or during generation of the common memory. The programm is terminated.
Response
Correct error and repeat run.
LEA5801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5801 CONVERSION OF DIRECTORY '(&00)' INTO (&01)-FORMAT STARTED
Meaning
Conversion of Directory (&00) into (&01) format has started
(&00): Name of directory
(&01): KEY / NONKEY
LEA5802
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5802 CONVERSION OF DIRECTORY '(&00)' COMPLETED
Meaning
Conversion of Directory (&00) was completed successfully.
(&00): Name of directory.
LEA5803
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5803 CONVERSION OF FILE '(&00)' INTO (&01)-FORMAT STARTED
Meaning
Conversion of file (&00) into (&01) format has started.
(&00): file name.
(&01): KEY / NONKEY
LEA5804
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA5804 CONVERSION OF FILE '(&00)' WITH (&01) RECORDS COMPLETED
Meaning
Conversion of file (&00) was completed successfully.
(&00): file name.
(&01): number of records.
LEA6P00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6P00 INVALID BIM-NUMBER, ONLY DIGITS AND LESS THAN 256 ALLOWED
LEA6001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6001 INVALID COMMAND BEGINNING WITH (&00)
Meaning
There is no valid statement in columns 1 to 4 of the input line. The input
line contains (&00) in columns 1 to 8. Valid statements are:
*CAT for LEASY directory specification
*FIL for file specification
*INF for information specification
*COM for comments
*ERA for erase specification
*END for to end the program.
Response
Correct statement keyword and repeat input.
LEA6002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6002 INVALID (&00)PARAMETER
Meaning
The operand (&00) is invalid or incorrect.
Response
Correct error and repeat input.
LEA6003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6003 INVALID PARAMETER KEYWORD
Meaning
Incorrect parameter keyword.
Response
Correct error and repeat input.
LEA6004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6004 RECORD CONTINUATION IN INPUT SENTENCE IN ERROR
Meaning
A read error occured during reading in of a statement using record
chaining. The preceding message LEA7001 or LEA400x identifies the error.
Response
Correct error with the aid of the other error messages.
LEA6005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6005 SECONDARY INDEX: SI-NAME MISSING OR INVALID
Meaning
A secondary index name contains invalid characters or is too long. Valid
characters are letters, $, #, @ and digits.
Response
Correct error and repeat input.
LEA6006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6006 ILLEGAL CHARACTER(S) BEHIND LEASY DIRECTORY NAME
Meaning
Invalid characters follow the LEASY catalog name.
Response
Correct input.
LEA6007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6007 ILLEGAL CHARACTER(S) BEHIND PARAMETER
Meaning
Invalid characters after an operand or a secondary index name.
Response
Correct input.
LEA6008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6008 INVALID CHARACTER(S) AT END OF LINE
Meaning
Invalid characters at the end of the input line.
Response
Correct input.
LEA6009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6009 FILE NAME MISSING OR INVALID
Meaning
The file name is missing from the current statement or is syntactically
invalid.
Response
Correct input.
LEA6010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6010 LEASY DIRECTORY NAME MISSING OR INVALID
Meaning
A catalog name has either not been specified in the *CAT statement or is
syntactically invalid.
Response
Correct input.
LEA6011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6011 WARNING: ILLEGAL CHARACTER(S) BEHIND PARAMETER
LEA6012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6012 INVALID DEVICE
Meaning
The specified device is not supported by the DMS or is not compatible
with the requested device type (disk/tape).
LEA6101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6101 UNDEFINED LEASY DIRECTORY
Meaning
A attempt has been made to issue a statement other than *CAT as the first
statement.
Response
Enter the *CAT statement and then repeat the original statement.
LEA6102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6102 INVALID PASSWORD
Meaning
The password is invalid or too long or there is a syntax error in
the password input.
Response
Correct error and repeat input.
LEA6103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6103 INVALID FCBTYPE
Meaning
Only SAM, ISAM, PAM and DAM access methods are permitted for LEASY files
at present.
Response
Correct error and repeat input.
LEA6104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6104 INVALID LEASY FILETYPE
Meaning
An invalid LEASY file type has been specified. The following are valid:
S for master files
M for model files
T for temporary files
F for foreign files.
Response
Correct error and repeat input.
LEA6105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6105 SUFFIX IN FILENAME TOO LONG (MORE THAN 20 CHARACTERS)
Meaning
The maximum file suffix length is 20 characters.
LEA6106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6106 WARNING: "SHARUPD" OR " DUPEKY" IGNORED
Meaning
The SHARUPD parameter is ignored because LEASY controls multiple access
to a file via the OPEN mode. DUPEKY is ignored because duplicates at
primary key level would not be subject to BIM saving.
LEA6107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6107 VOLUME AND/OR DEVICE PARAMETER NOT ALLOWED FOR EXISTING LEASY DIRECTORY
Meaning
The LEA.CATALOG utility routine cannot relocate an existing LEASY
directory
on annother disk: the VOLUME and DEVICE parameters are therefore only
permitted when creating a new directory.
Response
A LEASY directory can only be relocated on another disk by appropriate use
of the BS2000 commands CREATE-FILE, MODIFY-FILE-ATTRIBUTES, COPY-FILE and
DELETE-FILE.
LEA6108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6108 INF = YES ONLY WITH TYPE = OLD
Meaning
The TYP parameter specificationn contradicts that of the INF parameter.
Response
Correct input.
LEA6109
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6109 SECONDARY INDEX (&00): SYNTAXERROR
Meaning
Secondary index specification contains an unidentified syntax error.
Response
Correct error and repeat input.
LEA6110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6110 SECONDARY INDEX (&00): KEYPOSITON WRONG, NOT NUMERIC OR INVALID OR POSSIBLE ERROR AT INDEX SUPPRESSION BYTE
Meaning
The specified secondary index position is invalid, or the error is
related to the index suppression byte specification.
Response
Correct error and repeat input.
LEA6111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6111 SECONDARY INDEX (&00): KEYLENGTH OR PART OF IT WRONG, NOT NUMERIC OR INVALID
Meaning
An invalid key length or partial length has been specified for the
secondary index (&00).
Response
Correct input.
LEA6112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6112 SECONDARY INDEX (&00): INVALID DUPKEY PARAMETER
Meaning
An invalid DUPEKEY parameter was specified for the secondary index (&00).
Response
Correct input.
LEA6113
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6113 SECONDARY INDEX (&00): INVALID DISTANCE FOUND
Meaning
The displacement of a partial key of the secondary index (&00) is < 0
or > 32767.
Response
Correct input.
LEA6114
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6114 SECONDARY INDEX (&00): INVALID KEYUPDATE PARAMETER
Meaning
An invalid KEYUPDATE parameter has been specified for the secondary
index (&00).
Response
Correct input.
LEA6115
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6115 SECONDARY INDEX (&00): SYNTAXERROR AT INDEX SUPPRESSION BYTE
Meaning
On specification of an index suppression byte for the secondary index
(&00) one of the following errors occured:
- Suppression byte not in the form X'xx' or C'c'
- Suppression byte specified for total and partial secondary key
- Suppression byte not specified for all partial secondary keys
Response
Correct error and repeat input.
LEA6116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6116 ILLEGAL CHARACTER(S) BEHIND SECONDARY INDEX (&00)
Meaning
Illegal characters follow a secondary index name.
Response
Correct input.
LEA6117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6117 ILLEGAL CHARACTER(S) BEHIND FILE NAME
Meaning
Illegal characters follow the file name.
Response
Correct input.
LEA6118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6118 M-FILENAME TOO LONG TO BUILD SI-FILENAME
Meaning
When adding secondary indices to a model system a instance whose suffix is
too long has been found. Generation of secondary indices is not possible.
LEA6119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6119 TYPE = E: CPC- AND CPS-PARAMETER NOT ALLOWED
Meaning
The specification of CPC and CPS is not allowed if erasing of a LEASY
directory is requested.
LEA6120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6120 SECONDARY INDEX: INVALID REPETITION FACTOR
Meaning
Invalid repetition factor. The repetition factor must be > 0 and < 32769.
Response
Correct input.
LEA6121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6121 SECONDARY INDEX (&00): RECORD TYPE MISSING OR INVALID
Meaning
A record type is missing for the secondary index (&00) or is syntactically
invalid.
Response
Correct input.
LEA6122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6122 DELETE OF SECONDARY INDEX (&00): REPETITION FACTOR NOT ALLOWED
Meaning
A repetition factor has been specified when deleting the secondary
index (&00).
Response
Omit repetition factor and repeat input.
LEA6123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6123 RECORD TYPE FIELD (&00) INVALID
Meaning
(&00) = POSITION: The start of the record type field is outside the range
1 to 32768.
(&00) = LENGTH: The record type field length is < 1 or > 255.
Response
Correct input.
LEA6124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6124 SECONDARY INDEX (&00): ILLEGAL CHARACTER(S) BEHIND RECORD TYPE (&01)(&02)'
Meaning
An illegal character has been discovered following the record type (&01)
of the secondary index (&00).
Response
Correct input.
LEA6125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6125 INVALID READ PASSWORD
Meaning
The password (&00) is invalid or too long or there is a syntax error in
the password input.
LEA6126
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6126 INVALID WRITE PASSWORD
Meaning
The password is invalid or too long or there is a syntax error in
the password input.
LEA6127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6127 INVALID NEW PASSWORD
Meaning
The password is invalid or too long or there is a syntax error in
the password input.
Response
Correct input.
LEA6128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6128 SECONDARY INDEX: SYNTAXERROR
Meaning
Secondary index specification contains an unidentified syntax error.
Response
Correct error and repeat input.
LEA6129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6129 WRONG VALUE IN BLKCTRL OPERAND
Meaning
Only the following parameters are allowed: PAMKEY, DATA, DATA2K, DATA4K.
Response
Correct the BLKCTRL operand and try again.
LEA6130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6130 LINKNAME (FOR POOL/SIPOOL) IS PRIVILEGED.
Meaning
the following names are not allowed for user: $TASK01-16,
$SYS01-16.
Response
give a new linkname and repeat the run.
LEA6131
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6131 BLKCTRL CAN NOT BE MODIFIED
Meaning
The file attribute BLKCTRL can not be simply changed from
PAMKEY to DATA or contrary, but only by conversion of the file
with the utility LEASY-CONVERT.
LEA6132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6132 POOLNAME MISSING OR INVALID
Meaning
In the *POO-instruction the linkname is missing or invalid.
Response
Correct the *POO-instruction and try it again.
LEA6133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6133 CATID TOO LONG
Meaning
The catid may have max. 4 characters.
Response
Correct the *POO-instruction and try again.
LEA6134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6134 INVALID SIZE
Meaning
For allowed values consult the manual "DMS macros" (macro CREPOOL).
Response
Correct the *POO-instruction and try again.
LEA6135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6135 INVALID CATID
Meaning
Give catid without colons.
Response
Correct the *POO-instruction and try again.
LEA6137
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA6137 OLDL- and NEWL-operand are the same; no execution
Meaning
Same input for OLDL- and NEWL-operands. No conversion performed.
LEA6201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6201 SYNTAXERROR
Meaning
Missing or invalid delimiter in the last input line.
Response
Wait for prompt.
LEA6202
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6202 WRONG SPECIFICATION
Meaning
Incorrect or missing keyword in SI specification.
Response
Wait for prompt.
LEA6203
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6203 ADD OR DELETE SPECIFICATION WITHOUT SI NAME
Meaning
An ADD or DELETE specification contains no SI name, or the blank between
the specification keyword and the file name is missing
Response
Wait for prompt.
LEA6204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA6204 At least one BIM-file is not empty; OLDL/NEWL-Parameter will not be executed
Meaning
At least one BIM-file is not empty. Command not processed.
Consistent condition required.
LEA6301
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6301 INVALID NUMERIC VALUE IN PARAMETER
Meaning
An invalid numeric value has been given for an operand. The value must
be an integer within the range specified for the particular parameter
in the manual LEASY Utility Routines.
Response
Correct error and repeat input.
LEA6302
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6302 INPUT HAS SYNTACTICAL ERRORS.
Meaning
The input has syntactical errors.
Response
Please correct the input.
LEA6402
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6402 MORE THAN 255 EXTRACT PARAMETERS ARE NOT ALLOWED
Meaning
More than 255 EXTRACT specifications have been made in the *REP statement.
LEA6403
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6403 FILE FILTER OR ALL PARAMETER MISSING OR INVALID
Meaning
In the FILE FILTER statement the ALL parameter or the file selection is
invalid, or the entry has been omitted.
Response
Correct input.
LEA6404
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6404 ILLEGAL CHARACTER(S) BEHIND FILENAME OR PARANTHESIS MISSING
Meaning
Syntax error.
Response
Correct input.
LEA6405
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6405 INVALID (&00)
Meaning
(&00) is invalid.
(&00) = date: Is to specify in the form YYMMDD or YYYY-MM-TT.
(&00) = time: Is to specify in the form HHMM.
(&00) = TSN : 1 to 4 alphanumeric positions.
Response
Correct input.
LEA6406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6406 EXTRACT PARAMETER: SYNTAX ERROR
Meaning
Syntax error in the EXT parameter.
Response
Correct input.
LEA6407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6407 EXTRACT PARAMETER: POSITION MISSING OR INVALID
Meaning
The position specification in an EXT parameter is missing or invalid.
Response
Correct input.
LEA6408
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6408 EXTRACT PARAMETER: INVALID CHARACTERS BEHIND POSITION
Meaning
The start position specification in an EXT parameter is followed by
invalid
characters.
Response
Correct input.
LEA6409
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6409 EXTRACT PARAMETER: LENGTH MISSING OR INVALID
Meaning
The length specification in an EXT parameter is missing or invalid.
Response
Correct input.
LEA6410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6410 EXTRACT PARAMETER: ILLEGAL CHARACTER(S) BEHIND LENGTH OR PARANTHESIS MISSING
Meaning
Syntax error in an EXT parameter after the length specification.
Response
Correct input.
LEA6411
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6411 AIM RECORD SELECTION MISSING OR INVALID
Meaning
The record type selection is missing or invalid.
Response
Correct input.
LEA6412
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6412 ILLEGAL CHARACTER(S) BEHIND AIM RECORD SELECTION OR PARENTHESIS MISSING
Meaning
The AIM record type selection is following by invalid characters or
paranthesis are missing.
Response
Correct input.
LEA6501
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6501 NUMBER OF CYCLES WRONG, NOT NUMERIC OR INVALID
Meaning
The numeric entry is invalid.
LEA6502
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6502 SYNTAX ERROR IN TRANSACTION ID
Meaning
A syntax error has occurred in the transaction identifier specification.
LEA6503
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6503 SYNTAX ERROR IN FILE SPECIFICATION
Meaning
A syntax error has occurred in the file specification.
LEA6504
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6504 SYNTAX ERROR IN DISPLAY TIME
Meaning
A syntax error has occurred in the display time specification.
LEA6505
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6505 SYNTAX ERROR IN TRANSACTION NUMBER
LEA6506
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6506 NUMBER OF TRIALS WRONG, NOT NUMERIC OR INVALID
Meaning
The specification of trials for end of transactions is no number or a
number greater than 99.
LEA6507
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6507 WAITING TIME WRONG, NOT NUMERIC OR INVALID
Meaning
The specification of the waiting time between two trials for end of
transactions is no number or a number greater than 99.
LEA6508
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6508 WAITING TIME FOR FUNCTION (&00) NOT NUMERIC OR INVALID
Meaning
The waiting time specified for the function REPO respectively ROMS in the
utility LEASY-MASTER was either less than 1, greater than 120 or not a
numeric value.
Response
Go to the input mask for the waiting time of the function REPO
respectively ROMS and enter for the waiting time a correct value between
1 and 120. Otherwise the previous value for the waiting time of the
function REPO respectively ROMS remains valid.
LEA6509
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6509 AT THE CHOICE OF THE REACTION FOR THE FUNCTION (&00) THE INPUT IS INADMISSIBLE
Meaning
The reaction specified for the function REPO respectively ROMS in the
utility LEASY-MASTER was not 'R', 'B', 'I' or 'C'.
Response
Go to the input mask for the reaction of the function REPO respectively
ROMS and enter for the reaction a correct value ('R', 'B', 'I' or
'C'). Otherwise the previous value for the reaction of the function
REPO respectively ROMS remains valid.
LEA6510
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6510 INPUT NOT NUMERIC OR INVALID.
Meaning
The input (quantity of AIM-file-generations to unprotect or to
protect) is not numeric or is invalid.
Response
Please enter a valid numerical value for the quantity of
AIM-file-generations to unprotect or to protect.
LEA6601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6601 INVALID CHARACTER(S) BEHIND VSN
Meaning
Invalid characters following the VSN.
Response
Wait for prompt.
LEA6602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6602 INVALID CHARACTER(S) BEHIND DEVICE
Meaning
Invalid characters following the device.
Response
Wait for prompt.
LEA6603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6603 INVALID SAVING OPTION
Meaning
An invalid type of saving has been specified.
Response
Wait for prompt.
LEA6604
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6604 SECOND CHANGED PARAMETER MISSING OR INVALID
Meaning
The second parameter of the CHANGED entry is missing or invalid.
Response
Wait for prompt.
LEA6605
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6605 VSN MISSING OR INVALID
Meaning
No VSN or a syntactically invalid VSN has been entered.
Response
Wait for prompt.
LEA6606
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6606 WARNING: SOME VSN ARE IGNORED
Meaning
The area provided for the volume serial numbers entered is not large
enough to accomodate them all.
LEA6607
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6607 ERROR: FIRST CHARACTER EQUAL SPACE AND FOLLOWING CHARACTERS NOT EQUAL SPACE
Meaning
The response to the message LEA0606 or LEA0607 begins with a blank
followed by characters other than blanks.
Response
Wait for prompt.
LEA6608
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6608 MISSING OR INVALID USERID
Meaning
An invalid input has been made in response to the message LEA0608.
Response
Wait for prompt.
LEA6609
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6609 WARNING: ILLEGAL CHARACTER(S) AFTER LAST USERID
Meaning
The fifth user ID entered in response to the message LEA0608 is
followed by the other characters. These characters are ignored.
LEA6610
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6610 NO LEASY TEMPORARY FILES FOR USERID (&00)
Meaning
No occurrences of temporary files have been found under user ID (&00),
which was entered in response to the message LEA0608.
LEA6611
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6611 WARNING: MAYBE NOT ALL LEASY TEMPORARY FILES OF USERID (&00) ARE SAVED
Meaning
It is possible that not all occurrences of temporary files under
user ID (&00) have been saved.
Response
Inform LEASY maintenance.
LEA6612
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6612 UNKNOWN USERID (&00)
Meaning
The user ID (&00), which was entered in response to the message
LEA0608, does not exist.
LEA6613
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6613 CATID (&00) CANNOT BE FOUND
Meaning
The catid (&00) which was entered in response to the message
LEA0608 cannot be detected.
LEA6701
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6701 INVALID NUMERIC VALUE IN PARAMETER
Meaning
Values must be integer and within the following ranges:
for *ARL 12 <= x <= 32678
for *DBL 12 <= x <= 32678
for *IOT 1 <= x <= 255
for *KBL 1 <= x <= 255
for *KEL 1 <= x <= 255
for *USE 1 <= x <= 1800
for *WAI 1 <= x <= 43200
Response
Correct error and repeat input.
LEA6702
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6702 LEASY FILE NAME MISSING OR INVALID
Meaning
A filename has either not been specified in the *OPF statement or is
syntactically invalid.
Response
Correct input.
LEA6703
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6703 LEASY-OPEN-MODE MISSING OR INVALID
Meaning
The spezified LEASY open mode is missing or wrong.
Allowed are: 1 (INPUT), 2 (INPUT,SHARUPD), 3 (INOUT), 4 (INOUT,SHARUPD),
5 (REVERSE), A (OUTIN) and B (OUTIN,SHARUPD)
LEA6801
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA6801 UNDEFINED LEASY DIRECTORY
Meaning
The LEASY Directory does not exist.
Response
Correct Name of Directory and retry.
LEA7P00
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA7P00 PASSWORD NOT SET FOR (&00); CMD-PASSWORD WITH RC='(&01)'
Meaning
(&00): filename.
(&01): returncode from CMD-PASSWORD.
LEA7001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA7001 MACRO ERROR AT MODUL (&00). MACRO = (&01). CODE = X"(&02)".
Meaning
While using the macro (&01) an error (&02) has been detected in
module (&00).
Response
Identify error with the aid of the "Executive Macros" manual.
LEA7007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
LEA7007 MACRO ERROR AT MODUL (&00). MACRO = (&01). CODE = X'(&02)'
LEA8001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA8001 ERROR WITH FILE (&00). ERRORCODE OF LEASY RUNTIME SYSTEM IS (&01)
Meaning
During the processing of file (&00) an error has occurred. Details are
provided by the runtime system error code (&01).
LEA8002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA8002 Time limit for program run exceeded
Meaning
Time limit for program run exceeded. Program is ended abnormally.
LEA8003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA8003 PROGRAM (&00) NOT SUPPORTED IN LEASY VERSIONS GREATER THAN OR EQUAL TO (&01)
Meaning
The program (&00) is no longer supported in LEASY versions greater than
or equal to (&01).
(&00): Name of the program
(&01): LEASY version in the form 'vv.vv'.
LEA9101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9101 DNAME=(&00)
LEA9102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9102 FNAME=(&00)
LEA9103
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9103 FCBTYPE=..(&00)
LEA9104
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9104 FCBTYPE=..(&00).......RECSIMAX=(&01)
LEA9105
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9105 FCBTYPE=..(&00).......BLKSIZE=.(&01)
LEA9106
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9106 FCBTYPE=..(&00).......PAD=........(&01)
LEA9107
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9107 RECSIMAX=(&00).......KEYLEN=....(&01)
LEA9108
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9108 DNAME=(&00), LEASY FILE TYPE=(&01)
LEA9110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9110 LEASYTYPE=...(&00).......LOCK=......YES
LEA9111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9111 LEASYTYPE=...(&00).......LOCK=.......NO
LEA9120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9120 AIM=.......YES.......BIM=.......YES
LEA9121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9121 AIM=YES, SHORT.......BIM=.......YES
LEA9122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9122 AIM=YES, SHORT.......BIM=........NO
LEA9123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9123 AIM=.......YES.......BIM=........NO
LEA9124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9124 AIM=........NO.......BIM=.......YES
LEA9125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9125 AIM=........NO.......BIM=........NO
LEA9126
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9126 AIM=YES, AUTOM.......BIM=.......YES
LEA9127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9127 AIM=YES, AUTOM.......BIM=........NO
LEA9128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9128 AIM=SHORT, AUT.......BIM=.......YES
LEA9129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9129 AIM=SHORT, AUT.......BIM=........NO
LEA9130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9130 WRPASS=....YES.......RDPASS=....YES
LEA9131
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9131 WRPASS=....YES.......RDPASS=.....NO
LEA9132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9132 WRPASS=.....NO.......RDPASS=....YES
LEA9133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9133 WRPASS=.....NO.......RDPASS=.....NO
LEA9134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9134 POOL-LINK-NAME=...(&00)
LEA9135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9135 SIPOOL-LINK-NAME=.(&00)
LEA9136
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9136 DELETE=.....NO
LEA9137
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9137 ROM=.......YES
LEA9138
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9138 ROM=........NO
LEA9140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9140 RTF=.((&00),(&01))
LEA9141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9141 KEY=.((&00)
LEA9142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9142 ......(&00)(&01)
LEA9143
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9143 (&00)..RTP=((&01)(&02)(&03),
LEA9144
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9144 .......(&00)(&01)(&02)(&03),
LEA9145
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9145 ......(&00)HAS NO POINTERS IN SI FILE
LEA9146
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9146 POOL: (&00)
Meaning
+
Response
+
LEA9147
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9147 FOLLOWING LEASY-FILES ARE CONNECTED WITH POOL (&00):
Meaning
+
Response
+
LEA9148
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9148 FOLLOWING LEASY-SI-FILES ARE CONNECTED WITH POOL (&00):
Meaning
+
Response
+
LEA9149
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9149 NO LEASY-FILES ARE CONNECTED WITH POOL (&00)
Meaning
+
Response
+
LEA9150
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9150 NO LEASY-SI-FILES ARE CONNECTED WITH POOL (&00)
Meaning
+
Response
+
LEA9151
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9151 (&00)
Meaning
+
Response
+
LEA9152
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9152 NO POOLS IN LEASY-CATALOG
LEA9201
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9201 ALL FURTHER SI-SPECIFICATIONS FOR THIS FILE ARE BYPASSED
LEA95AA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AA LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 001: MAINTASK SELECTION
LEA95AB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AB LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 002: FUNCTION SELECTION
LEA95AC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AC LEASY MASTER PROGRAM VERSION (&00).............SCREEN 003: GENERAL INFORMATION
LEA95AD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AD LEASY MASTER PROGRAM VERSION (&00)............SCREEN 004: DISPLAY TABLE CYCLIC
LEA95AE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AE LEASY MASTER PROGRAM VERSION (&00)...............SCREEN 005: TRANSACTION TABLE
LEA95AF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AF LEASY MASTER PROGRAM VERSION (&00)................SCREEN 006: LOCK TRANSACTION
LEA95AG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AG LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 007: UNLOCK TRANSACTION
LEA95AH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AH LEASY MASTER PROGRAM VERSION (&00)............SCREEN 008: TH APPLICATION TABLE
LEA95AI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AI LEASY MASTER PROGRAM VERSION (&00)................SCREEN 009: TOTAL FILE TABLE
LEA95AJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AJ LEASY MASTER PROGRAM VERSION (&00).................SCREEN 010: OPEN FILE TABLE
LEA95AK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AK LEASY MASTER PROGRAM VERSION (&00)............SCREEN 011: ROLLBACK TRANSACTION
LEA95AL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AL LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 012: STATE OF AIM FILES
LEA95AM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AM LEASY MASTER PROGRAM VERSION (&00).......................SCREEN 013: LOCK FILE
LEA95AN
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AN LEASY MASTER PROGRAM VERSION (&00).....................SCREEN 014: UNLOCK FILE
LEA95AO
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AO LEASY MASTER PROGRAM VERSION (&00).......SCREEN 015: GENERAL STATISTIC COUNTER
LEA95AP
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AP LEASY MASTER PROGRAMM VERSION (&00)........SCREEN 016: TRANS STATISTIC COUNTER
LEA95AQ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AQ LEASY MASTER PROGRAM VERSION (&00)..........SCREEN 017: TASK STATISTIC COUNTER
LEA95AR
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AR LEASY MASTER PROGRAM VERSION (&00)......................SCREEN 018: TASK TABLE
LEA95AS
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AS LEASY MASTER PROGRAM VERSION (&00)..........SCREEN 019: SELECT TRANS STATISTIC
LEA95AT
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AT LEASY MASTER PROGRAM VERSION (&00).......SCREEN 020: SELECT TASK FOR STATISTIC
LEA95AU
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AU LEASY MASTER PROGRAM VERSION (&00)..................SCREEN 021: ERASE AIM FILE
LEA95AV
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AV LEASY MASTER PROGRAM VERSION (&00)...........SCREEN 022: GENERAL IO TASK TABLE
LEA95AW
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AW LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 023: IO TASK USER TABLE
LEA95AX
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AX LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 024: IO TASK TASK TABLE
LEA95AY
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AY LEASY MASTER PROGRAM VERSION (&00)....SCREEN 025: IO TASK QUEUING AVAILABILITY
LEA95AZ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95AZ LEASY MASTER PROGRAM VERSION (&00)...............SCREEN 026: TERMINATE IO TASK
LEA95BA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95BA LEASY MASTER PROGRAM VERSION (&00)......................SCREEN 043: ADD FILENAME
LEA95BB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95BB LEASY MASTER PROGRAM VERSION (&00)...................SCREEN 044: REMOVE FILENAME
LEA95BC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95BC LEASY MASTER PROGRAM VERSION (&00).................SCREEN 045: SET READONLY-MODE
LEA95BE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95BE LEASY MASTER PROGRAM VERSION (&00)......................SCREEN 047: ADD FILENAME
LEA95BF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95BF LEASY MASTER PROGRAM VERSION (&00)...................SCREEN 048: REMOVE FILENAME
LEA95B0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B0 LEASY MASTER PROGRAM VERSION (&00).................SCREEN 027: ISAM-POOL TABLE
LEA95B1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B1 LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 028: SHOW LOCK ELEMENTS
LEA95B2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B2 LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 029: DUMP ON RETURNCODE
LEA95B3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B3 LEASY MASTER PROGRAM VERSION (&00)..................SCREEN 030: ADD RETURNCODE
LEA95B4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B4 LEASY MASTER PROGRAM VERSION (&00)...............SCREEN 031: DELETE RETURNCODE
LEA95B5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B5 LEASY MASTER PROGRAM VERSION (&00)............SCREEN 032: AIM-SWITCH WITH WAIT
LEA95B6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B6 LEASY MASTER PROGRAM VERSION (&00)...................SCREEN 039: COPY SHADOWFILE
LEA95B7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B7 LEASY MASTER PROGRAM VERSION (&00)................SCREEN 040: ENTER WAITING TIME
LEA95B8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B8 LEASY MASTER PROGRAM VERSION (&00)...SCREEN 041: REACTION AT END OF WAITING TIME
LEA95B9
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95B9 LEASY MASTER PROGRAM VERSION (&00)....................SCREEN 042: FILE SELECTION
LEA95CA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CA CMMAIN STATUS:...................INITIALIZATION IS STILL WORKING
LEA95CB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CB CMMAIN STATUS:...................MAINTASK STARTING PHASE
LEA95CC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CC CMMAIN STATUS:...................INITILIZATION, PETR-HANDLING ACTIV
LEA95CD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CD CMMAIN STATUS:...................INITIALIZATION, READY FOR PETR-HANDLING
LEA95CE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CE CMMAIN STATUS:...................MAINTASK WAS TERMINATED
LEA95CF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CF CMMAIN STATUS:...................AIM FILE GENERATION SWITCHING IS IN ACTION
LEA95CG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CG CMMAIN STATUS:...................AIM FILE GENERATION SWITCHING WAS IN ERROR
LEA95CH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CH CMMAIN STATUS:...................NORMAL WORKING
LEA95CI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CI CMMAIN STATUS:...................READY FOR AIM RECONSTRUCTION
LEA95CJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CJ CMMAIN STATUS:...................END OF AIM RECONSTRUCTION, (&00)
LEA95CK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CK CMMAIN CONTROL:..................NO CONTROL FUNCTION IS ACTIV
LEA95CL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CL CMMAIN CONTROL:..................TERMINATE MAINTASK
LEA95CM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CM CMMAIN CONTROL:..................TERMINATE ALL OPEN TRANSACTION
LEA95CN
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CN CMMAIN CONTROL:..................HOLD ALL TRANSACTIONS
LEA95CO
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CO CMMAIN CONTROL:..................ACCEPT NO FURTHER TRANSACTIONS
LEA95CP
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CP CMMAIN CONTROL:..................ACCEPT NO FURTHER TRANSACTIONS UNTIL >CONT<
LEA95CQ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95CQ CMMAIN CONTROL:..................SWITCH AIM FILE GENERATION
LEA95DA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DA CURRENT LEASY DIRECTORY:.........(&00)
LEA95DB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DB CURRENT SESSION NUMBER:..........(&00)
LEA95DC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DC USE BEFORE IMAGE LOGGING:........YES
LEA95DD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DD USE BEFORE IMAGE LOGGING:........NO
LEA95DE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DE USE AFTER IMAGE LOGGING:.........YES, AIM GEN#=(&00)
LEA95DF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DF USE AFTER IMAGE LOGGING:.........NO
LEA95DG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DG NUMBER OF ACTIVE TRANSACTIONS:...(&00) OF MAX. (&01)
LEA95DH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DH NUMBER OF OPEN FILES:............(&00) OF MAX. (&01)
LEA95DI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DI NUMBER OF ACT. TA APPLICATIONS:..(&00) OF MAX. (&01)
LEA95DJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DJ BUCKET POOL MEMORY SIZE:.........(&00) BYTES
LEA95DK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DK SIZE OF ONE BUCKET IN POOL:......(&00) BYTES
LEA95DL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DL NUMBER OF BUCKETS IN BUCKET POOL:(&00)
LEA95DM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DM USED BUCKETS FOR LOCK ELEMENTS:..(&00)
LEA95DN
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DN USED BUCKETS FOR TRANSACTIONS:...(&00)
LEA95DO
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DO UNUSED BUCKETS:..................(&00)
LEA95DP
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DP NUMBER OF LOCKED DATA RECORDS:...(&00)
LEA95DQ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DQ NUMBER OF FREE LOCK ELEMENTS:....(&00)
LEA95DR
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DR SYSLST PRINTOUT SWITCH IS SET:...ON
LEA95DS
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DS UPD. COMMANDS ON CMMAIN ALLOWED:.YES
LEA95DT
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DT NUMBER OF ACTIVE TASKS:..........(&00) OF MAX. (&01)
LEA95DU
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DU UPD. COMMANDS ON CMMAIN ALLOWED:.NO
LEA95DV
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DV SYSLST PRINTOUT SWITCH IS SET:...OFF
LEA95DW
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DW TIME TO WAIT FOR END OF TRANSACTIONS:...(&00)
LEA95DX
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95DX REACTION FOR UNFINISHED TRANSACTIONS:.....(&00)
LEA95EA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95EA NUMBER OF NOT SUCCESSFUL AIM-SWITCHINGS:..... (&00)
LEA95E0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E0 LEASY MASTER PROGRAM VERSION (&00)...........SCREEN 036: AIM-FILE-ADMINISTRATION
LEA95E1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E1 LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 037: UNPROTECT AIM-FILES
LEA95E2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E2 LEASY MASTER PROGRAM VERSION (&00)................SCREEN 038: PROTECT AIM-FILES
LEA95E3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E3 QUANTITY OF AIM-FILE-GENERATIONS:............ (&00)
LEA95E4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E4 UNPROTECTED AIM-FILE-GENERATIONS:............ (&00)
LEA95E5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E5 PROTECTED AIM-FILE-GENERATIONS:.............. (&00)
LEA95E6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E6 AIM-FILE-GENERATION IN USE:.................. (&00)
LEA95E7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E7 CURRENT AIM-FILESIZE FOR SWITCHING:.......... (&00)
LEA95E8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E8 NORMAL AIM-FILESIZE FOR AIM-SWITCHING:....... (&00)
LEA95E9
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95E9 INCREMENT FOR AIM-FILESIZE:.................. (&00)
LEA95GA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GA CONTROL COMMANDS:.... >(&00)< TERMINATE MAINTASK PROGRAM
LEA95GB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GB ..................... >(&00)< DO NOT ACCEPT FURTHER TRANSACTIONS, TERM MAINTASK
LEA95GC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GC ..................... >(&00)< ROLLBACK ALL ACTIVE TRANSACTIONS, TERM MAINTASK
LEA95GD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GD ..................... >(&00)< DO NOT ACCEPT FURTHER TRANSACTIONS UNTIL >CONT<
LEA95GE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GE ..................... >(&00)< HOLD ALL TRANSACTIONS
LEA95GF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GF ..................... >(&00)< CONTINUE ALL TRANSACTIONS
LEA95GG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GG ..................... >(&00)< HOLD SPECIAL TRANSACTION(S)
LEA95GH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GH ..................... >(&00)< ROLLBACK SPECIAL TRANSACTION(S)
LEA95GI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GI ..................... >(&00)< CONTINUE SPECIAL TRANSACTION(S)
LEA95GJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GJ ..................... >(&00)< HOLD SPECIAL FILE
LEA95GK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GK ..................... >(&00)< CONTINUE FOR SPECIAL FILE
LEA95GL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GL ..................... >(&00)< SWITCH TO NEXT AIM FILE GENERATION IMMEDIATELY
LEA95GM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GM ..................... >(&00)< SWITCH TO NEXT AIM FILE GEN. WITH CLOSED TRANS.
LEA95GN
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GN DISPLAY COMMANDS:.... >(&00)< GENERAL CMMAIN INFORMATION
LEA95GO
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GO ..................... >(&00)< TRANSACTION TABLE
LEA95GP
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GP ..................... >(&00)< TABLE OF ALL FILES IN RUNNING APPLICATION
LEA95GQ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GQ ..................... >(&00)< TABLE OF OPENED FILES WITHIN TRANSACTIONS
LEA95GR
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GR ..................... >(&00)< UTM APPLICATION TABLE
LEA95GS
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GS ..................... >(&00)< CYCLIC DISPLAY OF A TABLE
LEA95GT
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GT ..................... >(&00)< TASK SPECIFIC STATISTIC INFORMATION
LEA95GU
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GU ..................... >(&00)< ERASE AIM FILE GENERATION
LEA95GV
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GV PRINT CONTROL:....... >(&00)< SWITCH ON SYSLST PRINTOUT
LEA95GW
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GW ..................... >(&00)< SWITCH OFF SYSLST PRINTOUT
LEA95GX
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GX DISPLAY COMMANDS:.... >(&00)< ALL MASTER PROGRAM FUNCTIONS
LEA95GY
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GY ..................... >(&00)< GENERAL STATISTIC INFORMATION
LEA95GZ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95GZ ..................... >(&00)< TRANSACTION SPECIFIC STATISTIC INFORMATION
LEA95G0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G0 ..................... >(&00)< TASK TABLE
LEA95G1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G1 ..................... >(&00)< TERMINATE AN IO TASK
LEA95G2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G2 ..................... >(&00)< GENERAL IO TASK TABLE
LEA95G3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G3 ..................... >(&00)< IO TASK USER TABLE
LEA95G4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G4 ..................... >(&00)< IO TASK TASK TABLE
LEA95G5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G5 ..................... >(&00)< IO TASK QUEUING AVAILABILITY
LEA95G6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G6 ..................... >(&00)< STATUS OF AIM FILE GENERATIONS
LEA95G7
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G7 ..................... >(&00)< ISAM-POOL INFORMATION TABLE
LEA95G8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G8 ..................... >(&00)< SWITCH TO NEXT AIM GEN. AFTER WAIT FOR CLOSE TRANS
LEA95G9
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95G9 ..................... >(&00)< TABLE OF LOCK ELEMENTS
LEA95HA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95HA ..................... >(&00)< DUMP FOR SPECIFIED RETURNCODES
LEA95HB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95HB ..................... >(&00)< START OF AIM-FILE-ADMINISTRATION
LEA95HC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95HC CONTROL COMMANDS:.... >(&00)< REPLACE ORIGINAL FILES BY THEIR SHADOW FILES
LEA95HD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95HD ..................... >(&00)< SET READ-ONLY MODE
LEA95HE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95HE ..................... >(&00)< RESET READ-ONLY MODE
LEA95IA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IA LEASY CALLS:.....(&00)(&02)...WRITE OPERATIONS ON BIM FILE(S):.(&01)(&03).
LEA95IB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IB OPFL CALLS:......(&00)(&02)...WRITE OPERATIONS ON AIM FILE:....(&01)(&03).
LEA95IC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IC ...............................WRITE OPERATIONS ON AIM FILE:....(&00)
LEA95ID
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95ID USER FILE OPENS:.(&00)(&02)...AIM RECORDS:.....................(&01)(&03).
LEA95IE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IE ...............................AIM RECORDS:.....................(&00)
LEA95IF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IF OPTR CALLS:......(&00)(&02)...CALLS ON LOCK PROTOCOL:..........(&01)(&03).
LEA95IG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IG CLTR CALLS:......(&00)(&02)...WAITS IN LOCK PROTOCOL:..........(&01)(&03).
LEA95IH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IH ...............................WAITS IN LOCK PROTOCOL:..........(&00)
LEA95II
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95II SETL CALLS:......(&00)(&02)...REJECTED CALLS ON LOCK PROTOCOL:.(&01)(&03).
LEA95IJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IJ READING CALLS:...(&00)......LOCKED DATA RECORDS:.............(&01)
LEA95IK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IK READING CALLS:...(&00)(&02)...TRANSACTION ROLLBACK:............(&01)(&03).
LEA95IL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95IL WRITING CALLS:...(&00)(&02)...DEADLOCK RETURNS:................(&01)(&03).
LEA95KA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KA MEMORY POOL SIZE:.............(&00) BYTES
LEA95KB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KB QUEUING STRATEGY:.............(&00)
LEA95KC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KC MAX. SIZE AR:.................(&00) BYTES
LEA95KD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KD MAX. SIZE DB:.................(&00) BYTES
LEA95KE
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KE MAX. SIZE KB:.................(&00) BYTES
LEA95KF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KF MAX. SIZE KE:.................(&00) BYTES
LEA95KG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KG SIZE OF SLOT:.................(&00) BYTES
LEA95KH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KH NUMBER OF IO TASKS:...........(&00) OF MAX. (&01)
LEA95KI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KI NUMBER OF USER TASKS:.........(&00) OF MAX. (&01)
LEA95KJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KJ MAX. WAITING TIME:............(&00) SECONDS
LEA95KK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KK NUMBER OF LEASY OPERATIONS:...(&00)
LEA95KL
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KL SEMAPHOR IS USED FROM:........(&00)
LEA95KM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95KM SEMAPHOR IS:..................FREE
LEA95LA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95LA NUMBER OF WAITING USER TASKS:.(&00)
LEA95LB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95LB NUMBER OF FREE IO-TASKS:......(&00)
LEA95MA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MA AUTOMATIC RECONSTRUCTION OF SHADOW FILES: YES
LEA95MB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MB AUTOMATIC RECONSTRUCTION OF SHADOW FILES: NO
LEA95MC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MC FREE AIM GENERATIONS:..................... (&00) - (&01)
LEA95MD
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MD FREE AIM GENERATIONS:..................... NONE
LEA95ME
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95ME AIM GENERATION IN USE:.................... (&00)
LEA95MF
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MF GEN. WAITING FOR THE END OF SWITCH:....... (&00) - (&01)
LEA95MG
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MG GEN. WAITING FOR THE END OF SWITCH:....... NONE
LEA95MH
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MH AIM GENERATIONS READY FOR RECONSTRUCTION:. (&00) - (&01)
LEA95MI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MI AIM GENERATIONS READY FOR RECONSTRUCTION:. NONE
LEA95MJ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MJ AIM GENERATIONS IN RECONSTRUCTION:........ (&00) - (&01)
LEA95MK
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MK AIM GENERATIONS IN RECONSTRUCTION:........ NONE
LEA95ML
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95ML NUMBER OF AIM FILE GENERATIONS:........... (&00)
LEA95MM
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MM AIM-GENERATION IN USE:.................... NONE
LEA95MN
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MN NO USE OF AIM-LOGGING.
LEA95MO
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MO FREE AIM GENERATION:...................... (&00)
LEA95MP
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MP AIM GENERATION IN RECONSTRUCTION:......... (&00)
LEA95MQ
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MQ AIM GENERATION READY FOR RECONSTRUCTION:.. (&00)
LEA95MR
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MR GEN. WAITING FOR THE END OF SWITCH:....... (&00)
LEA95MS
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MS CURRENTLY PROCESSED AIM GENERATION:....... (&00) ((&01))
LEA95MT
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95MT (&00) OF (&01) PAM PAGES ((&02)%) PROCESSED
LEA95NA
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95NA ............(&00).........(&01).........(&02).........(&03).........(&04).. ..........
LEA95NB
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95NB PLEASE ENTER RETURNCODE YOU WANT TO ADD (BLANK=NO ADD):
LEA95NC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95NC PLEASE ENTER RETURNCODE YOU WANT TO DELETE OR A[LL] (BLANK=NO DELETE):
LEA95P1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95P1 PLEASE TYPE IN NUMBER OF TRIALS (BLANK=5; MIN=0; MAX=99):
LEA95P2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95P2 PLEASE TYPE IN WAITING TIME BETWEEN TWO TRIALS (BLANK=5 SECONDS;MIN=0; MAX=99)
LEA95Q2
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95Q2 !INT!LOGICAL !LOCK!INT!...........................KEY...................... ....!
LEA95Q3
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95Q3 !TNR!FILENAME!TYPE!IND!.................................................... ....!
LEA95Q4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95Q4 !---+--------+----+---+---------------------------------------------------- ----!
LEA95Q5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95Q5 !(&00)!(&01)!(&02)!(&03)!(&04)!
LEA95Q6
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA95Q6 !-------------------------------------------------------------------------- ----!
LEA9504
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9504 ........................................................................... .....
LEA9550
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9550 SELECTED FILES:
LEA9555
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9555 TRANSACTION STATUS: 1=ACTIVE; 2=ROLLBACK; 3=HOLD
LEA9556
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9556 HOST......APPLICATION/...USER......NUMBER OF.....INTERNAL.SESSION SPEC.. TRANS
LEA9557
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9557 NAME......IDENTIFICATION.NAME......FILE PATH.TRANS-NUMBER.TRANS-NUMBER. STATUS
LEA9558
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9558 (&00)
LEA9559
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9559 NUMBER OF REMAINING DISPLAY CYCLES UNTIL END OF CYCLE FUNCTION: (&00)
LEA9560
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9560 LOCK: 1=MASTER UPDATE LOCK; 2=MASTER READ LOCK; 3=YES; 4=NO
LEA9561
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9561 ..FILE.LOGICAL..FCB-.LEASY.AIM.+------NUMBER OF OPENS-------+.LOCKED BY.. RECORD
LEA9562
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9562 NUMBER.FILENAME.TYPE.TYPE..BIM.TASKS.RETR-TRANS.NONRETR-TRANS.ITN/MASTER.. LOCK.
LEA9563
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9563 (&00)
LEA9565
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9565 LOCK ON FILE: 1=UPDATE LOCK; 2=READ LOCK; 3=NO LOCK
LEA9566
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9566 ..FILE.LOGICAL..FCB-.LEASY.AIM.NUMBER.LOCK ON.DMS FILENAME (FIRST 35 CHARACTERS)
LEA9567
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9567 NUMBER.FILENAME.TYPE.TYPE..BIM..OF SI..FILE...OR MODEL INSTANCE NAME....... .....
LEA9568
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9568 ...LINKNAME...POOLSIZE...CREATION-MODE.....CID
LEA957A
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA957A NUMBER..TSN...NUMBER OF LEASY CALLS
LEA957B
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA957B ...(&00)..(&01)..(&02)
LEA957C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA957C NUMBER..TSN...NUMBER OF LEASY OPERATIONS
LEA9573
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9573 ROLLBACK FOR OTHER TRANSACTION(S) WILL BE DISPLAYED IN THE TRANSACTION TABLE
LEA9574
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9574 THE ROLLBACK WILL BE DISPLAYED IN THE TRANSACTION TABLE
LEA9575
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9575 THE LOCK WILL BE DISPLAYED IN THE TRANSACTION TABLE
LEA9576
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9576 ..TASK.......TASK
LEA9577
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9577 NUMBER...TSN.TYPE.IDENTIFICATION
LEA9578
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9578 TASK TYPE: 1=INTERACTIVE; 2=BATCH; 3=UTM-B/S; 4=UTM-T; 5=DCAM
LEA9582
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9582 IN COLUMN "LOCKED BY MASTER"
LEA9586
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9586 TABLE ENTRY NUMBER...UTM/DCAM APPL. NAME.NUMBER OF TASKS IN THIS APPLICATION
LEA9599
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9599 START OF TRANSACTION (&00) TIME: (&01)
LEA9601
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9601 LEASY MASTER PROGRAM VERSION (&00)..............SCREEN 033: DIAGNOSTIC AIDS
LEA9602
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9602 (&00) (&01)
LEA9603
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9603 FUNCTION SELECTION (OR A=ACTIVATE; OR D=DEACTIVATE;
LEA9611
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9611 LEASY MASTER PROGRAM VERSION (&00).........SCREEN 034: ACTIVATE DIAGNOSTIC AID
LEA9612
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9612 PLEASE ENTER NUMBER OF DIAGNOSTIC AID YOU WANT TO ACTIVATE (BLANK=NO ADD):
LEA9621
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9621 LEASY MASTER PROGRAM VERSION (&00).......SCREEN 035: DEACTIVATE DIAGNOSTIC AID
LEA9622
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
LEA9622 ENTER NR. OF DIAGNOSTIC AID YOU WANT TO DEACTIVATE OR A(LL) (BLANK=NO DEACT.):