Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04AC WARNING: INCORRECT TIME CONVERSION FROM UTC TO LT. PROCESSING CONTINUES
Meaning
This message is issued if the GTIME macro for converting the time from
UTC to local time is terminated incorrectly when output of a catalog
entry is initiated by a SHOW-JV-ATTRIBUTES command.
The date/time specifications converted incorrectly are indicated
with ????-??-?? or ??:??:??.
Response
Have the startup parameter file checked by the system administrator
and corrected if necessary.
JVS04AD
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04AD ERROR DURING PRESENTATION VARIABLE PRODUCTION
Meaning
A problem has been encountered during the production of presentation
variables by the command server.
Possible reasons:
- subsystem SDF-P not available
- lack of space for SSTA buffer
- return code from SSTA interface.
JVS04A0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04A0 SUBSYSTEM 'JV' NOT ACCESSIBLE. COMMAND REJECTED
Meaning
The subsystem JV (Job Variable Services) could not be connected to
the system.
Possible reasons:
- The job variable subsystem is not available.
- An error occurred in the system function for setting up the
subsystem connection.
Response
Contact the system administrator.
JVS04A1
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04A1 SYNTAX ERROR IN JV COMMAND. CORRECT COMMAND
Meaning
The command is rejected because one or more of the operands specified
in it contains a syntax error.
JVS04A2
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JVS04A2 JOB VARIABLE '(&00)' DELETED
Meaning
Deletion of the specified job variable is acknowledged.
The output was caused by the operand OUTPUT=SYSOUT in the DELETE-JV
command.
JVS04A3
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JVS04A3 ERROR WHEN DELETING JOB VARIABLE '(&00)'
Meaning
This message indicates that the specified job variable could not be
deleted. The reason is given in the following message.
JVS04A6
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04A6 SYSTEM ERROR DURING OUTPUT TO SYSOUT. COMMAND REJECTED
Meaning
An error has occurred during execution of a YTIEOUT macro.
Possible reasons:
- unrecoverable I/O error
- illegal operand
- excessively long message.
Response
If the error is fatal, contact the system administrator. Generate
diagnostic material if necessary.
JVS04A9
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04A9 /MODIFY-JV-CONDITIONALLY: BRANCH DESTINATION NOT FOUND. PROCEDURE ABORTED
JVS04BB
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04BB ERROR DURING MODIFYING A JV. COMMAND REJECTED
Meaning
Possible reasons:
- both JVTYPE=INTGEGER and JVTYPE=BOOLEAN was specified
- in addition to a specified substring the JVTYPE=INTEGER
or BOOLEAN or NULLSTR=YES was given.
JVS04BC
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04BC WARNING: NOT ALL JOB VARIABLES DISPLAYED OR DELETED
Meaning
Possible cause:
- The sum of the job variable names affected by the DELETE-JV or
SHOW-JV-ATTRIBUTES command resulted in saturation of the memory space.
- The processing of the command is interrupted by a /CANCEL-JOB command.
Response
It is a good idea to repeat the command unchanged in order to process
those job variable names not affected the first time.
JVS04BD
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04BD ERROR WHEN ACCESSING SYSTEM FUNCTION. COMMAND REJECTED
Meaning
The error occurred while attempting to access one of the system
functions ($TANC, $APCB, $EZOTYP, $JCBRW, $GTIME, $RDUID etc.).
Response
Inform the system administrator so that diagnostic material
can be generated.
JVS04BE
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04BE SPECIFIED USER ID DOES NOT EXIST. COMMAND REJECTED
Meaning
Possible reasons:
- no DEFAULT-PUBSET could be found
- the specified PVS does not contain the desired user ID
- the specified user id 'SYSJV' is reserved and must not be
used in this command.
Response
Reissue the command with the correct PVS ID or request the system
administrator to add the user ID to the appropriate PVS.
JVS04BF
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04BF REQUESTED ACCESS TO JV NOT PERMITTED DUE TO EXISTING JV PROTECTION. COMMAND REJECTED
Meaning
Possible reasons:
- the job variable is protected with Basic-ACL or GUARDS
- the subsystem GUARDS is not loaded.
Response
If possible, change the access authorization accordingly or
ask the system administrator to start the subsystem GUARDS.
JVS04B1
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B1 PASSWORD NOT SPECIFIED. COMMAND REJECTED
Meaning
The user has attempted to access a job variable without specifying the
necessary password.
Response
Enter the required password by means of the PASSWORD operand or the
ADD-PASSWORD command and then repeat the rejected JV command.
JVS04B2
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B2 SPECIFIED JOB VARIABLE SUBSTRING EMPTY OR ILLEGAL. COMMAND REJECTED
Meaning
Possible reasons:
- the job variable is empty
- the specified substring of the job variable is empty
- the values specified in the substring entry exceed the maximum
permissible job variable length (256 bytes).
Response
Check the length of the job variable contents using SHOW-JV-ATTRIBUTES
and then repeat the JV command after correcting the error.
JVS04B3
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B3 SYNTAX ERROR IN JV NAME. CORRECT COMMAND
Response
Correct the job variable name and then repeat the command.
JVS04B4
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B4 LINK NAME NOT DEFINED BEFOREHAND. COMMAND REJECTED
Response
Define the job variable link name by means of the SET-JV-LINK command
and then repeat the JV command.
JVS04B5
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04B5 SYSTEM ERROR DURING JVS OPERATION: REQUEST MEMORY ERROR. COMMAND REJECTED
Meaning
Operating system error. Possible error causes:
- there is not enough memory space to complete command processing
- an illegal operand has been specified for $GETMEM.
Response
Inform the system administrator so that diagnostic material can be
generated.
JVS04B6
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B6 EXPIRATION DATE FOR JOB VARIABLE NOT YET REACHED. COMMAND REJECTED
Meaning
The expiration date in the job variable catalog entry is later than the
current date, thus making it impossible to delete or modify the
job variable.
Response
Modify the retention period of the job variable by means of the
MODIFY-JV-ATTRIBUTES command and then repeat the rejected JV command.
JVS04B7
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04B7 SYSTEM ERROR DURING JVS OPERATION: RELEASE MEMORY ERROR. COMMAND REJECTED
Meaning
Operating system error. Possible causes:
- the specified area was not requested by means of $GETMEM
- an invalid operand was specified for $RETMEM.
Response
Inform the system administrator so that diagnostic material can be
generated.
JVS04B8
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04B8 ONLY READ ACCESS PERMITTED. COMMAND REJECTED
Response
Change the access authorization by means of the MODIFY-JV-ATTRIBUTES
command and then repeat the rejected JV command.
JVS04CA
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS04CA ERROR DURING UPDATE OF CE LIMIT. COMMAND PROCESSING TERMINATED ABNORMALLY
Meaning
The update of the CE limit counter is terminated abnormally.
The CMS operation concerned could not be processed completely.
Response
Inform the system administrator so that diagnostic material can be
generated.
JVS04C8
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04C8 CE LIMIT REACHED. COMMAND REJECTED
Meaning
This message is issued if the current CE counter exceeds the CE contingent
specified in the file SYSSRPM when a JV catalog entry is entered into the
TSOSCAT.
Response
Delete JV's no longer required or
ask the system administrator to increase the CE contingent for the user's
job variables with the aid of the MODIFY-USER command.
JVS04D0
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D0 MONITORING JOB VARIABLE '(&00)' IS NOT ACCESSIBLE. REASON: '(&01)'. IN SYSTEM MODE: /HELP-MSG JVS(&01)
Meaning
An internal call to access monitoring job variable (&00) was not
successful. Return code (&01) has the same meaning as message JVS(&01).
Response
Consult message JVS(&01).
JVS04D1
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D1 JOB VARIABLE '(&00)' NOT ASSIGNED TO JOB
Meaning
The JV (&00) isn't a monitoring job variable, i.e. either it has not
been assigned to a job or the job to which it was assigned has already
terminated.
JVS04D2
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D2 MONITORING JOB VARIABLE '(&00)' ALREADY ASSIGNED TO ANOTHER JOB
Meaning
The specified monitoring job variable has already been assigned to a job
and is still being used.
Response
Wait until the job in question terminates or use a different monitoring
job variable.
If this message is displayed even though the monitoring job variable is
not really being used (as may happen after a system crash), it can be made
available again by means of the MODIFY-JV-ATTRIBUTES command.
JVS04D3
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D3 MONITORING JOB VARIABLE '(&00)' CANNOT BE CREATED. REASON: '(&01)'. IN SYSTEM MODE: /HELP-MSG JVS(&01)
Meaning
An internal call to create the specified monitoring job variable was not
successful. Return code (&01) has the same meaning as message JVS(&01).
Response
Consult message JVS(&01).
JVS04D4
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D4 SYNTAX ERROR IN NAME OF MONITORING JOB VARIABLE '(&00)'. CORRECT COMMAND
Meaning
The name specified for the monitoring job variable contains a syntax
error.
JVS04D5
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D5 CATALOG ENTRY FOR MONITORING JOB VARIABLE '(&00)' CANNOT BE UNLOCKED. REASON: '(&01)'. IN SYSTEM MODE: /HELP-MSG JVS(&01)
Meaning
An internal call to cancel a catalog lock for the specified monitoring
job variable was not successful. Return code (&01) has the same
meaning as message JVS(&01). The catalog lock is automatically
reset after a certain interval (system task: 60 seconds, dialog
task: 120 seconds, batch task: 600 seconds).
Possible cause:
The monitoring job variable is accessed via MSCF-connection between two
hosts and this connection has been severed.
Response
Consult message JVS(&01).
JVS04D6
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D6 MONITORING JOB VARIABLE '(&00)' HAS NO TSN
Meaning
The job associated with the monitoring job variable has not yet got
a TSN.
Response
Try again after a short interval.
JVS04D7
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04D7 MONJV '(&00)' CANNOT BE WRITTEN/REMOVED FROM THE GCF-CATALOG. REASON: '(&01)'
Meaning
Possible reasons:
An internal call to write or remove the MONJV (&00) to/from the
GCF-catalog was not successful. The function $GCFROP reports
(&01) within maincode.
JVS04D8
Destination: USER-TASK Routing code: Weight: 30
Warranty : YES
JVS04D8 MONITORING JOB VARIABLE '(&00)' CANNOT BE PROVIDED WITH LINK NAME. REASON: '(&01)'. IN SYSTEM MODE: /HELP-MSG JVS(&01)
Meaning
An internal call to link the monitoring job variable (&00) via the
link name was not successful. Return code (&01) has the same meaning
as message JVS(&01).
Response
Consult message JVS(&01).
JVS04D9
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
JVS04D9 THE GCF-CATALOG COULD NOT BE PROCESSED SUCCESSFUL. GCF FUNCTION '(&00)' REPORTS '(&01)'
Meaning
Possible reasons:
- Error during initialisation/termination of the subsystem JV.
$GCFFOP reports an unrecoverable error (&01) during the function
status, create, open or close.
- error during the import of a pubset. $GCFROP reports an unre-
coverable error (&01) during the function read next one, remove or
add.
(&00): function
(&01): error code.
JVS04E0
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04E0 COMMAND CANNOT BE EXECUTED WITHOUT CHANGING CALL ENVIRONMENT. COMMAND REJECTED
Response
Determine the cause of the error using the preceding message JVS04xx,
remove the error if possible, and repeat the command.
JVS04E1
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS04E1 COMMAND CANNOT BE EXECUTED AT THE MOMENT. COMMAND REJECTED
Response
Determine the cause of the error using the preceding message JVS04xx,
remove the error if possible, and repeat the command.
Depending on the type of error, a repeat of the command with unchanged
call operands may be successful even if no measures have been taken to
remove the error.
JVS04F0
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS04F0 SPECIAL JOB VARIABLE MUST NOT BE COPIED. COMMAND REJECTED
Meaning
The COPY-JV command must not be used here as special job variables may
not be copied.
Response
Use MODIFY-JV instead of COPY-JV.
JVS04F3
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JVS04F3 ERROR WHEN ACCESSING JOB VARIABLE '(&00)'
Meaning
This message indicates that the job variable (&00) could not be
accessed. The reason is given in the following message.
JVS0401
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0401 REQUESTED CATALOG NOT ACCESSIBLE. COMMAND REJECTED
Meaning
One of the specified path names contains the catalog ID of a catalog
that cannot be accessed.
Response
Contact the system administrator.
JVS0402
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0402 REQUESTED CATALOG IN QUIET MODE. WAITING TIME EXPIRED. COMMAND REJECTED
Meaning
One of the specified path names contains the catalog ID of a catalog which
is in quiet mode. There has been no change in this status during the
scheduled waiting time.
Response
Contact the system administrator.
JVS0403
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0403 MRSCAT CONTAINS INCORRECT INFORMATION. COMMAND REJECTED
Meaning
According to the MRSCAT (multiprocessor system catalog), a certain
catalog ID is available for remote access, which in actual fact it is not.
Response
Contact the system administrator.
JVS0404
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0404 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
One of the specified path names contains the catalog ID of a remote
catalog which is in quiet mode. As it is not possible to place the
job in the wait state, the catalog cannot be accessed.
Response
Inform the system administrator so that diagnostic material
can be generated.
JVS0405
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0405 SYSTEM ERROR DURING JVS OPERATION: MSCF COMMUNICATION ERROR. COMMAND REJECTED
Meaning
Communication error.
An error has occurred in the MSCF communication facility when
accessing a remote catalog.
Response
Request the system administrator to check the MSCF connection. If no
error can be found there, it must have been a temporary fault and
you should simply repeat the job.
JVS0406
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0406 CMS OPERATION ABORTED BY USER
Meaning
The CMS was called while a master change was in progress.
The user did not want to wait with execution of the operation until
termination of the master change.
Response
Release any existing locks. Try again later, if necessary.
JVS0407
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0407 CMS WRITE OPERATION NOT PROCESSED
Meaning
The process of writing a catalog entry to the TSOSCAT has not been
executed because a master change was being processed.
Response
If necessary repeat the aborted operation, including all previous
operations connected to it.
JVS041F
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS041F SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
During a catalog operation an unrecoverable error occurred in CMS, which
normally terminates the task abnormally. Because the task concerned is the
JOIN task (TSN=RP01 or RP02) instead of the task the catalog operation is
aborted with this message.
JVS0410
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0410 A FUNCTION USED BY CATALOG MANAGEMENT REPORTS ERROR. PROCESSING ABORTED
Meaning
Possible reasons:
- conversion between the old and the new catalog format could not be
processed.
- error during processing of the TASKLIST on the slave host in the
shared PVS network.
- error during processing of internal tables in MSCF processing.
Response
Try function again. If the error occurs again contact the system
administrator.
JVS0412
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0412 REQUESTED CATALOG NOT FOUND. COMMAND REJECTED
Meaning
One of the specified path names contains the catalog ID of a catalog which
does not have an entry in the MRSCAT (multiprocessor system catalog).
Response
Possible responses:
- Check the contents of the entries in the MRSCAT and then repeat the
JV command.
- Request the system administrator to enter the required catalog ID
in the MRSCAT.
JVS042C
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS042C SYSTEM ERROR DURING JVS OPERATION: PAM ERROR. COMMAND REJECTED
Meaning
Operating system error.
The request is illegal (e.g. invalid number or page parameter, or
page parameter specified by class 2 program).
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS042D
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS042D SYSTEM ERROR DURING JVS OPERATION. PPAM HAS PASSED TO UPAM: 'WAIT' AND 'CONTINGENCY' REQUESTED
Meaning
Operating system error.
Response
Contact the system administrator and request diagnostic material,
if necessary.
JVS042F
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS042F SYSTEM ERROR DURING JVS OPERATION: RESIDENT PAGE SPACE EXHAUSTED. COMMAND REJECTED
Meaning
Operating system error.
A class 2 program has attempted to create more resident
pages than were reserved at execution time.
Response
Inform the system administrator so that diagnostic material
can be generated.
JVS0422
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0422 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
The requested logical half-page is not available for the job variable.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS0423
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0423 SYSTEM ERROR DURING JVS OPERATION: PAM ERROR. COMMAND REJECTED
Meaning
Operating system error.
CMS has attempted to change the status of a page not assigned to CMS.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS0424
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0424 SYSTEM ERROR DURING JVS OPERATION: SYSTEM ADDRESS SPACE EXHAUSTED. COMMAND REJECTED
Meaning
Operating system error.
CMS has requested more contiguous memory than is currently available.
Response
Repeat the command after a short interval.
Inform the system administrator so that diagnostic material can
be generated.
JVS0425
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0425 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
Possible errors:
- CMS issued a command which DQPAM did not recognize
- DQPAM requested an illegal function.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS0426
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0426 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
DQPAM has detected a buffer address that crosses a page boundary
and is therefore not permitted.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS0427
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0427 SYSTEM ERROR DURING JVS OPERATION: PAM ERROR. COMMAND REJECTED
Meaning
Operating system error.
DQPAM detected an I/O error while performing the requested function.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS0428
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0428 SYSTEM ERROR DURING CATALOG ACCESS DUE TO INVALID DEVICE ACCESS AUTHORIZATION
Meaning
PPAM has detected that a disk access function was called by catalog
management with an invalid device access authorization.
Response
Contact the system administrator and request diagnostic material,
if necessary.
JVS0429
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0429 SYSTEM ERROR DURING JVS OPERATION: PAM ERROR. COMMAND REJECTED
Meaning
Operating system error.
DQPAM has detected an invalid SLOT address.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS043B
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS043B SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
The routine for the catalog access has returned an error in the lock
mechanism for the catalog entries.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS043C
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS043C NO MORE SPACE AVAILABLE FOR CATALOG FILE. COMMAND REJECTED
Meaning
The user has not been allocated enough space. The routine for the
catalog access requires another catalog block, but the requested
catalog has reached its maximum size.
Response
Request the system administrator to allocate additional space for the
catalog file.
JVS043D
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS043D SYSTEM ERROR DURING JVS OPERATION: TSOSCAT DESTROYED. COMMAND REJECTED
Meaning
Operating system error.
The structure of the job variable catalog entry is invalid.
Response
Inform the system administrator so that diagnostic material can
be generated.
JVS043E
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS043E JOB VARIABLE TO BE CREATED ALREADY EXISTS
JVS0430
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0430 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
The routine for the catalog access requires more storage space than is
available ($GETMEM error).
Response
Retry the JV command later.
JVS0431
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0431 OPERAND ILLEGAL. CORRECT COMMAND
Meaning
The JV command contains one of the following errors:
- invalid operand registers have been passed to CMS.
- general error in CMS.
Message DMS0331 lists further possible errors. Either enter
/HELP-MSG DMS0331 in system mode to request more detailed information
about the error or contact the system administrator.
Retry the command after LOGOFF BUT.
JVS0432
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0432 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
The catalog entry of the job variable is locked by another task.
JVS0433
Destination: USER-TASK Routing code: Weight: 10
Warranty : NO
JVS0433 REQUESTED JOB VARIABLE NOT CATALOGED. COMMAND REJECTED
Response
Use the CREATE-JV command to create the job variable.
JVS0434
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0434 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
Response
Retry the JV command later.
JVS0435
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0435 JOB VARIABLE NOT ACCESSIBLE DUE TO ACTIVE JV PROTECTION. COMMAND REJECTED
Meaning
The user attempted to access a job variable whose catalog entry
is inaccessible due to the current protection attributes.
One of the following protection mechanisms can be active:
- standard protection
- basic access control (BASIC-ACL)
- profile protection (GUARDS).
JVS0436
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
JVS0436 SYSTEM ERROR DURING JVS OPERATION: CATALOG MANAGEMENT ERROR. COMMAND REJECTED
Meaning
Operating system error.
The risk of a deadlock was recognized when attempting to lock a catalog
entry.
Response
Inform the system administrator so that diagnostic material can be
generated.
JVS0438
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0438 NOT MANY FREE BLOCKS LEFT FOR PVS ID IN CATALOG FILE 'TSOSCAT'
Meaning
Only 5 to 7 catalog blocks are still available in TSOSCAT.
Response
Request the system administrator to enlarge TSOSCAT accordingly by
means of the MODIFY-FILE-ATTRIBUTES command.
JVS0439
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0439 NO FREE CATALOG BLOCKS LEFT FOR PVS ID IN CATALOG FILE 'TSOSCAT'
Response
Request the system administrator to enlarge TSOSCAT accordingly by
means of the MODIFY-FILE-ATTRIBUTES command.
JVS044A
Destination: USER-TASK Routing code: Weight:
Warranty : NO
JVS044A INVALID GUARD NAME SPECIFIED. COMMAND REJECTED
Meaning
An invalid GUARD name has been detected during the syntax check.
JVS044B
Destination: USER-TASK Routing code: Weight:
Warranty : NO
JVS044B INVALID MANAGEMENT CLASS SPECIFIED. COMMAND REJECTED
Meaning
Possible reasons:
- the management class ist not accessible by the specified user,
- the management class is unknown in the pubset,
- the pubset is not a SM-pubset,
- the pubset is not accessible.
JVS044C
Destination: USER-TASK Routing code: Weight:
Warranty : NO
JVS044C ACCESS TO RULE CONTAINER FOR DEFAULT PROTECTION COULD NOT BE EXECUTED. COMMAND REJECTED
Meaning
Possible reasons:
- reading the standard protection rule is not possible, f.e. because
the catalog is not accessible.
- the guard, indicated in the standard protection rule, which contains
the attribute values respectively the list of user ID's, may not be
used according to the guard scope.
- internal error, the guard user is unknown to the GUARD access control.
Response
If possible, change the access authorization accordingly.
JVS0440
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0440 ILLEGAL JV NAME. CORRECT COMMAND
Meaning
Possible errors:
- no JV name has been specified
- a foreign user ID has been specified (prerogative of the system
administrator)
- the coownership of the system administrator was restricted for this
job variable.
- the JV name contains illegal characters.
Response
Correct the JV name and repeat the CREATE-JV or MODIFY-JV-ATTRIBUTES
command.
JVS0441
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0441 NEW JV NAME ILLEGAL. CORRECT COMMAND
Meaning
Possible errors:
- a user ID was specified which is not equal to the user ID of JV name
- a catalog ID was specified which is not equal to the catalog ID of JV
name
- the new JV name contains illegal characters.
Response
Correct the new JV name and repeat the MODIFY-JV-ATTRIBUTES command.
JVS0442
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0442 NEGATIVE RETENTION PERIOD. CORRECT COMMAND
Meaning
The MODIFY-JV-ATTRIBUTES command is not permitted as a negative value
has been specified for the retention period.
JVS0444
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0444 JV NAME OR NEW JV NAME ALREADY CATALOGED. COMMAND REJECTED
Meaning
The attempt to catalog a job variable that is already cataloged
has been rejected.
Response
Check the job variable status.
JVS0445
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0445 INVALID RETENTION PERIOD SPECIFICATION. COMMAND REJECTED
Meaning
Following error has occurred in the MODIFY-JV-ATTRIBUTES
command:
the retention period is errored; there is no creation date in
the catalog entry.
Response
Check the job variable status.
JVS0447
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0447 JV NAME BEING USED BY CJC FUNCTION. COMMAND REJECTED
Meaning
The catalog entry of the job variable cannot be modified or deleted
as long as a CJC function (WAIT-EVENT, ADD-CJC-ACTION) is accessing
this job variable.
CJC: Conditional Job Control.
Response
If necessary, repeat the command once the CJC function has stopped
accessing the job variable.
JVS0448
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0448 MONITORING JOB VARIABLE MUST NOT BE CHANGED. COMMAND REJECTED
Meaning
The MODIFY-JV-ATTRIBUTES command cannot be used as it is not permissible
to modify the name or attributes of a monitoring job variable.
JVS0449
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0449 ONLY DEFAULT ATTRIBUTES PERMITTED FOR TEMPORARY JOB VARIABLE. COMMAND REJECTED
Meaning
When creating temporary job variables, only the default protection
attributes can be used. These values cannot be modified.
Response
Use the default values for all protection attributes of the temporary
job variable and then repeat the rejected command.
JVS0451
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0451 NO JV LINK TABLE ENTRY EXISTS
Meaning
No JV link table entry has been made for requested job variable(s)
in this task.
JVS0457
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
JVS0457 RELEASE ALL JV LINK NAMES OF THE TASK? REPLY (Y=YES; N=NO)
Meaning
This question follows in connection with the command
REMOVE-JV-LINK LINK=*ALL and the user has the possibility to withdraw
the entered command.
JVS0458
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
JVS0458 REQUEST FOR RELEASING ALL JV LINK NAMES WITHDRAWN BY CALLER
Meaning
The JV link names of the task will not be released, because the request
for release was not confirmed.
JVS046A
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS046A DELETE REQUEST WITHDRAWN BY CALLER
Meaning
The request to delete a job variable or all job variables of a given
catalog ID or user ID was ignored as the caller did not confirm
the deletion request.
JVS0460
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0460 DELETE COMMAND ILLEGAL AS JOB VARIABLE CATALOGED UNDER FOREIGN USER ID. COMMAND REJECTED
Meaning
Only the owner of a job variable and the system administrator are
authorized to delete this JV.
Response
Request the owner or system administrator to delete the job variable.
JVS0463
Destination: USER-TASK, CONSOLE Routing code: R Weight: 30
Warranty : NO
JVS0463 WARNING: JVS ERROR '(&01)' WHEN DELETING JV '(&00)'. PROCESSING CONTINUES
Meaning
During execution of the REMOVE-USER command an error has occurred
while deleting the job variable.
JVS0464
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0464 WARNING: DELETE ERROR. '(&00)' STILL HAS CATALOG ENTRIES FOR JV. PROCESSING CONTINUES
Meaning
The system administrator has attempted to delete the catalog entry of
user ID (&00) from the user catlog by means of the REMOVE-USER command.
In the process a fatal error occurred when deleting a job variable, with
the result that user ID (&00) is only locked instead of deleted.
Response
Delete the relevant job variable and then repeat the REMOVE-USER command.
JVS0465
Destination: USER-TASK Routing code: Weight: 90
Warranty : YES
JVS0465 DELETE ALL JOB VARIABLES '(&00)' OF USER ID? REPLY (Y=YES; N=NO; T=TERMINATE COMMAND; ?=EXPLAIN ADDITIONAL OPTIONS)
Meaning
A partially qualified job variable name may cover more than one
job variable.
This message is displayed whenever the user ID is switched.
Response
Reply T: Deletion is aborted as of the specified user ID.
Y: The deletion request is confirmed; the job variables are
deleted.
N: The job variables of the specified user ID are not deleted.
?: Explanations of the additional options will be displayed,
followed by renewed display of the task.
,CHECK=(SINGLE; MULTIPLE; PVS; NO):
The specifications in check mode correspond to the
DIALOG-CONTROL operand with the values JV-CHANGE (SINGLE),
USER-ID-CHANGE (MULTIPLE), CATALOG-CHANGE (PVS), NO.
Any other response is interpreted as 'N'.
JVS0466
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0466 DELETION OF MONITORING JOB VARIABLE NOT PERMITTED. COMMAND REJECTED
Response
Wait until the job variable is no longer being used as a monitoring job
variable.
If this message is issued even though the job variable to be deleted is
not being used as a monitoring job variable, the JV can be reset with
the aid of the MODIFY-JV-ATTRIBUTES (MONJV-PROTECTION operand).
JVS0468
Destination: USER-TASK Routing code: Weight: 90
Warranty : YES
JVS0468 DELETE ALL JOB VARIABLES '(&00)' OF CATALOG ID? REPLY (Y=YES; N=NO; T=TERMINATE; ?=EXPLAIN ADDITIONAL OPTIONS)
Meaning
A partially qualified job variable name may cover more than one
job variable. This message is displayed for each local catalog
of the system.
Response
Reply T: Deletion is aborted as of the specified catalog ID.
Y: The deletion request is confirmed; the job variables are
deleted.
N: The job variables of the specified catalog are not
deleted.
?: Explanations of the additional options will be displayed,
followed by renewed display of the task.
,CHECK=(SINGLE; MULTIPLE; PVS; NO):
The specifications in check mode correspond to the
DIALOG-CONTROL operand with the values JV-CHANGE (SINGLE),
USER-ID-CHANGE (MULTIPLE), CATALOG-CHANGE (PVS), NO.
Any other reply is interpreted as 'N'.
JVS0469
Destination: USER-TASK Routing code: Weight: 90
Warranty : YES
JVS0469 DELETE JOB VARIABLE '(&00)'? REPLY (Y=YES; N=NO; T=TERMINATE; ?=EXPLAIN ADDITIONAL OPTIONS)
Meaning
Check mode 'CHECK=SINGLE' has been set. This means that the deletion
request has to be confirmed separately for each job variable.
Response
Reply T: Deletion is aborted as of the specified job variable.
Y: The deletion request is confirmed; the job variable is deleted.
N: The job variable is not deleted.
?: Explanations of the additional options will be displayed,
followed by renewed display of the task.
,CHECK=(SINGLE; MULTIPLE; PVS; NO):
The specifications in check mode correspond to the
DIALOG-CONTROL operand with the values JV-CHANGE (SINGLE),
USER-ID-CHANGE (MULTIPLE), CATALOG-CHANGE (PVS), NO.
Any other reply is interpreted as 'N'.
JVS0470
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0470 WARNING: JV VALUE CONTAINS FEWER BYTES THAN REQUESTED. PROCESSING CONTINUES
Meaning
The output job variable value contains fewer characters than were
requested by the substring specification in the SHOW-JV command.
JVS0471
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0471 SPECIAL JOB VARIABLE '$SYSJV.LAST-MSG' NOT ACCESSIBLE. COMMAND REJECTED
Meaning
The contents of special job variable SYSJV.LAST-MSG could not be
output by means of the SHOW-JV command.
Possible reasons:
1) The command was issued in interactive mode, which is not permitted.
2) An operating system error has occurred.
Response
1) Repeat the command in procedure or batch mode.
2) Inform the system administrator so that diagnostic material
can be generated.
JVS0472
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0472 NAME OF SPECIAL JOB VARIABLE NOT PERMITTED. CORRECT COMMAND
Meaning
The name of the special job variable specified in the SHOW-JV command
is illegal.
Permissible names for special job variables can either be output by the
system using the command SHOW-JV-ATTRIBUTES $SYSJV.
or looked up in the "Job Variables" manual.
JVS0474
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS0474 WARNING: JV VALUE TRUNCATED. PROCESSING CONTINUES
Meaning
An error has occurred while processing the SHOW-JV command. As the
value of the job variable is greater than the specified substring
specification, it has been truncated on the right.
JVS0480
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0480 SPECIAL JOB VARIABLE MUST NOT BE SET. COMMAND REJECTED
Meaning
The MODIFY-JV command must not be used here as special job variables
can only be accessed in read mode.
JVS0487
Destination: USER-TASK Routing code: Weight: 30
Warranty : NO
JVS0487 SYSTEM PART OF MONITORING JOB VARIABLE IS WRITE-PROTECTED. COMMAND REJECTED
Meaning
The MODIFY-JV command has been rejected as it is not permitted to
modify the first 128 bytes of a monitoring job variable.
JVS14A4
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS14A4 CATALOG INDEX AT MAXIMUM SIZE
Meaning
Request the system administrator to erase files or JV's that are no
longer required.
Response
Files and JV's, that are no longer required should be erased by the
system administrator.
JVS14A5
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JVS14A5 CATALOG INDEX DESTROYED
Meaning
The CMS operation cannot be executed because the catalog index of the
specified SM pubset is destroyed.
Response
Retry, as the catalog index may be reconstructed in the meantime.
Reconstruction will be performed during the next IMPORT-PUBSET at the
latest.