Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0301 DESTINATION PROCESSOR '(&00)' NOT CONNECTED TO MSCF NETWORK. COMMAND REJECTED
Meaning
The specified destination processor is known to the MSCF network but
the communication link to this processor was severed when the
command was issued.
(&00): BCAM name of the destination processor specified in the command as
a BCAM name or a catalog ID (CAT-ID) or via a job variable.
MSCF: Multi System Control Facility.
Response
Request the operator to restore the connection to this processor
and repeat the command after this has been done.
JDS0302
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0302 DESTINATION PROCESSOR '(&00)' NOT KNOWN IN MSCF NETWORK. COMMAND REJECTED
Meaning
(&00): BCAM name of the destination processor specified in the
command as a BCAM name or a catalog ID (CAT-ID) or via
a job variable.
MSCF: Multi System Control Facility.
Response
Correct the BCAM processor name, catalog ID or job variable and then
repeat the command.
JDS0303
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0303 CONNECTION TO DESTINATION PROCESSOR '(&00)' SEVERED. COMMAND PROCESSING ABORTED
Meaning
While transmitting a job to the specified destination processor the
communication link to this processor was interrupted. The result of
command processing is undefined.
Exception: in the case of ENTER processing and if message JDS0311 was
displayed on the operator console of the destination processor,
ENTER processing was error-free; without message JDS0311, it was
aborted without any result.
(&00): BCAM name of the destination processor.
Response
Ask the operator of the destination processor for information on the
processor or job status.
JDS0304
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0304 JOB VARIABLE '(&00)' NOT ACCESSIBLE. REASON: '(&01)'. COMMAND REJECTED
Meaning
The job variable containing the name of the processor or catalog is not
accessible. The /ENTER-JOB command was not processed.
(&00): name of the job variable specified in the HOST operand instead of
the BCAM name or the catalog ID.
(&01): return code (same meaning as message JVS(&01)).
Response
Perform the action suggested for the error identified in the
appropriate JVS message and repeat the /ENTER-JOB command.
JDS0305
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0305 JOB DISTRIBUTION NOT AVAILABLE. COMMAND REJECTED
Meaning
When the /ENTER-JOB command was issued, the job distribution
facility (MSCF) was not available.
MSCF: Multi System Control Facility.
Response
Ask the operator to set up the MSCF environment and repeat the
/ENTER-JOB command once this has been done.
JDS0307
Destination: CONSOLE Routing code: R Weight: 70
Warranty : NO
JDS0307 JOB DISTRIBUTION READY
JDS0308
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0308 JOB DISTRIBUTION CURRENTLY INACTIVE ON DESTINATION PROCESSOR '(&00)'. COMMAND NOT PROCESSED
Meaning
The job distribution facility on the destination processor is available,
but currently not ready for use. The /ENTER-JOB command was not processed.
(&00): BCAM name of the destination processor.
Response
Request the system administrator of the destination processor to
ready the job distribution facility, and repeat the /ENTER-JOB command
once this has been done.
JDS0309
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0309 CATALOG '(&00)' NOT KNOWN IN MSCF NETWORK. COMMAND REJECTED
Meaning
The catalog identified in the HOST operand is not known in the
MSCF network.
MSCF: Multi System Control Facility.
Response
Correct the catalog name and repeat the /ENTER-JOB command.
If there was no error in the catalog name, contact the system
administrator.
JDS0310
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0310 CATALOG '(&00)' KNOWN IN MSCF NETWORK BUT NOT ACCESSIBLE. COMMAND REJECTED
Meaning
The catalog specified in the HOST operand is known in the MSCF
network, but is not accessible.
MSCF: Multi System Control Facility.
Response
Ask the system administrator to make the catalog accessible
and repeat the /ENTER-JOB command once this has been done.
JDS0311
Destination: CONSOLE Routing code: J Weight: 70
Warranty : NO
JDS0311 USER ID '(&03)' RECEIVED JOB FROM REMOTE PROCESSOR '(&00)', USER ID '(&02)'. TSN: (&01)
Meaning
This message is purely informative and explains that the local
processor has accepted a valid job from the specified remote processor.
(&01): TSN of the job.
(&02): user ID which issued the /ENTER-JOB or /ENTER-PROCEDURE command.
(&03): user ID under which the job is to run.
JDS0313
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0313 Command not supported on destination processor. Command rejected
Meaning
The destination processor uses a different BS2000 Version that does not
support the sending or receiving of the given command.
JDS0314
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0314 OPERAND '(&00)' NOT SUPPORTED ON DESTINATION PROCESSOR. PROCESSING CONTINUES
Meaning
Operand (&00) is not known in BS2000 version of the destination
processor.
Command processing is continued in such a way, as if the parameter
was not specified.
(&00): Operand of the actual command.
JDS0316
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0316 SYSCMD FILE NOT CATALOGED ON REMOTE HOST
Meaning
The requested SYSCMD file has not been cataloged on the pubset
of the remote host.
Command processing is aborted.
JDS0317
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0317 SYSCMD FILE IS MIGRATED ON REMOTE HOST. COMMAND REQUEST WITHDRAWN BY CALLER
JDS0320
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0320 JOB DISTRIBUTION NOT POSSIBLE. COMMAND REJECTED
Meaning
It is not possible to accept the job on any of the hosts of the
XCS cluster with the given operands or defaults.
Response
Try it again with new operand values.
JDS0321
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
JDS0321 SUBSYSTEM 'JPPOPT' NOT LOADED: COMMAND NOT PROCESSED
Meaning
The corresponding subsystem is not loaded in the present BS2000
configuration.
Response
Try the command again after having loaded the subsystem.
JDS0322
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
JDS0322 PROCESSOR '(&00)': JOB NOT ACCEPTED: '(&01)'
Meaning
Job cannot be accepted on processor (&00) of XCS cluster.
Possible reasons (&01):
- Connection to the destination processor is severed
- System error / SHUTDOWN in process / memory saturation
- Command file / MONJV / calendar data not accessable
- Invalid access authorization
- Job class IN DELETE / not accessable / not defined
- Job class limits inhibit value of operand
Response
NONE
JDS0349
Destination: CONSOLE Routing code: R Weight: 70
Warranty : NO
JDS0349 JOB DISTRIBUTION TASK TERMINATED ABNORMALLY
Meaning
A system error has occurred in the job distribution task, causing
task termination and making job distribution impossible.
Response
Request the system administrator to restart MSCF communication
by means of the /MRSSTART command.