Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0001 FDEXIM READY. VER (&00), CR-DATE (&01)
Meaning
FDEXIM is ready:
(&00): Version no., (&01): Creation date.
Response
None.
FEI0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0002 FDEXIM CMD PROCESSING
Meaning
This message indicates that an action (EXPORT, IMPORT
or LIST) processing starts.
Response
None.
FEI0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0003 FDEXIM CMD PROCESSING COMPLETED
Meaning
The command has been executed without error.
Response
None.
FEI0004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0004 FDEXIM INVALID CMD. CMD REJECTED
Meaning
The command entered is not a valid command for FDEXIM.
Response
Reissue the corrected command.
FEI0005
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0005 INCONSISTENCY BETWEEN PARAM. CMD REJECTED
Meaning
The values of the parameters NAMES, RENAMES,
EXCEPT of the command F<ILES>, are inconsistent.
Response
Submit a new FILES command with correct parameters.
FEI0006
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0006 FDEXIM CMD PROCESSING TERM WITH ERROR(S)
Meaning
One or several errors occurred during CMD processing.
Refer to the message displayed during the run.
Response
None.
FEI0007
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0007 FDEXIM PARAMETER SYNTAX ERROR. CMD REJECTED
Meaning
A parameter syntax error has been detected while
scanning the parameter(s) of the command.
Response
Submit a new command with corrected parameter(s).
FEI0008
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0008 CMD SEQUENCE ERROR. CMD REJECTED
Meaning
An EXPORT or IMPORT has been requested without a
FILES command or more than one FILES command has
been given for one action command.
Response
Submit a FILES command followed by an EXPORT
or an IMPORT command.
FEI0009
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0009 FILE (&00) DOES NOT EXIST. CMD REJECTED
Meaning
File (&00) does not exist. As a consequence, the EXPORT
command is rejected.
Response
Check the catalog. Correct the wrong value and reenter
a new FILES command and a new EXPORT command.
FEI0010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0010 DMS ERROR (&00) ON FILE (&01). FILE NOT PROCESSED
Meaning
A DMS error, with error code (&00), is detected while
processing file (&01). Processing continues with the
next file.
Response
Remove the DMS error (see manual System Messages) and
restart the processing for file (&01).
FEI0011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0011 DMS ERROR (&00). FILE (&01) CANNOT BE ERASED
Meaning
In an EXPORT run, the file (&01) cannot be erased due to
a DMS error; error code=(&00). The EXPORT run continues.
Response
None.
FEI0012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0012 DMS ERROR (&00) ON FILE (&01). PROCESSING CONTINUES
Meaning
An error (&00), other than open, occurred while
processing file (&01). The processing continues for this file
according to the user's request to accept errors
(ERROR=ACCEPT).
Response
Check file (&01) for wrong records. Nonreadable PAM-
records have been processed like 'binary 0'.
FEI0013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0013 DMS ERROR (&00) ON FILE (&01). FILE IS SKIPPED
Meaning
An error (&00), other than open, occurred while
processing the file (&01). The file (&01) is skipped.
Response
Remove error (see manual System messages) and restart
the operation for file (&01).
FEI0014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0014 DMS ERROR (&00) ON FILE (&01). CMD PROCESSING TERMINATED
Meaning
An error (&00), other than open, occurred while
processing file (&01). The processing of the IMPORT or
EXPORT command is terminated.
Response
Remove the error and restart the processing for file (&01).
FEI0015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0015 PASSWORD GIVEN DOES NOT MATCH WITH VOLUME'S PASSWORD. CMD TERMINATED
Meaning
The password, given with parameter SVPASS, doesn't match
with the volume's password. The access is forbidden
and the IMPORT or LIST command processing is terminated.
Response
Submit correct password and restart the IMPORT or LIST
operation.
FEI0016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0016 FILE (&00) TO BE IMPORTED ALREADY EXISTS. FILE NOT REPLACED
Meaning
The parameter REPLACE=NO has been specified and a
file to be imported already exists. The file is not
imported from the floppy disk.
Response
1) Submit IMPORT command with REPLACE=YES.
2) Rename or erase file (&00).
FEI0017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0017 DMS ERROR (&00) ON FILE (&01). FILE CANNOT BE REPLACED
Meaning
A DMS error, code=(&00), is detected while attempting
specified and the erase is unsuccessful.
Response
Change access to file (&01) by CAT command and reissue
the IMPORT command.
FEI0018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0018 INTERNAL ERROR. RUN OF FDEXIM IS STOPPED
Meaning
An internal error of FDEXIM, such as unsuccessful REQM
or RELM, has been detected. The processing cannot be
continued.
Response
Try another run of FDEXIM and inform the
system support staff.
FEI0019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0019 THE FLOPPY DISK HAS NOT BEEN CREATED WITH FDEXIM OR HAS BEEN ALTERED. CMD TERMINATED
Meaning
The contents of the floppy disk was not created by
FDEXIM or has been altered. The processing of the
IMPORT or LIST command is terminated.
Response
Check the contents of FD. Use correct FD and restart
IMPORT or LIST.
FEI0020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0020 RDATA ERROR WHEN READING CMD. FDEXIM ABNORMAL TERM
Meaning
An error has been detected while reading a command
submitted by the user. The run of FDEXIM cannot
continue.
Response
Restart the FDEXIM run.
FEI0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0021 SYSDTA MAY ONLY BE ASSIGNED TO (SYSCMD) OR (PRIMARY)
Meaning
The user has assigned SYSDTA to something else than
(SYSCMD) or (PRIMARY).
The run of FDEXIM cannot continue.
Response
Assign correctly SYSDTA before executing FDEXIM.
FEI0022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0022 FILE (&00) NOT IMPORTED
Meaning
The filename specified (&00) has not been imported
either because of an error which has been specified
in a previous message or because the specified file
has not been found on the floppy disc.
Response
The user can give a LIST CMD to list the contents of
the floppy disk if he isn't sure of the filenames or, if
possible, take the action to suppress any eventual
error on the files given by previous messages.
FEI0023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0023 DMS ERROR (&00) ON FILE (&01). CMD REJECTED
Meaning
A DMS error, with error code = (&00), is detected
for the file (&01). The EXPORT command is rejected.
Response
Remove error (see manual System Messages).
Reissue the FILES and EXPORT command.
FEI0024
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0024 TOO MANY FILE NAMES GENERATED FOR THE PARTIALLY QUALIFIED FILENAME (&00). CMD REJECTED
Meaning
The buffer for the list of filenames is not large
enough; more than about 700 filenames are generated from
the partially qualified filename (&00) given.
The command is rejected.
Response
Try again with, for example, several partially qualified
filenames in the FILES command, to process these files.
FEI0025
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0025 RENAME TOO LONG FOR FILE (&00)
Meaning
The filename built from user's FILES command with
RENAME option is too long.
The command is rejected for an EXPORT command.
For an IMPORT command processing the filename is
truncated to maximal length.
Response
None.
FEI0026
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0026 ERROR WHEN SWITCHING FLOPPY DISKS. FLOPPY DISK FILE '(&00)' CLOSED
Meaning
IMPORT or LIST processing of FDEXIM has been aborted because of
an error when switching file (&00) to a continuation floppy disk.
Response
Check the order of the floppy disks in the IMPORT or LIST statements;
correct any error that is detected and re-enter the statement.
If necessary, check for operator errors.
FEI0027
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
FEI0027 READ ERROR ON FLOPPY DISK FILE (&00)
Meaning
An error occurred while reading the floppy disk with
RDATA macro. (&00) is the current data set filename.
The IMPORT or LIST processing is terminated.
Response
Verify the actions of the operator.
Retry a new run of FDEXIM.