Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0000 NOTE: ONLY THE LAST 5 HEL FILES WILL BE ANALYZED
Meaning
In command mode you have specified an analysis period using the
DATE-TIME-FROM and/or DATE-TIME-TO operands.
The analysis period covers more than 5 HEL files. A maximum of 5 HEL
files can be analyzed together. Consequently only the last 5, i.e. the
5 most recent HEL files, are analyzed.
ELS0001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0001 NOTE: CURRENT HEL FILE - THERE ARE MORE (OLDER) HEL FILES PRESENT
Meaning
In command mode you have not specified an analysis period (DATE/TIME...);
only the current HEL file will be analyzed.
Response
If you specify an analysis period, the HEL files from that period
will be analyzed jointly.
A maximum of 5 HEL files can be analyzed jointly.
ELS0020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0020 NOTE: YOU ARE CURRENTLY ON A GUEST SYSTEM OF A VM
Meaning
HEL file analysis on a guest system of a virtual machine covers
only the error entries of the relevant guest system.
Response
Start HEL file analysis on the monitor system.
ELS0200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0200 RETURN PERFORMED - FUNCTION NOT EXECUTED
ELS0201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0201 RETURN PERFORMED, SELECTED MARK FIELDS HAVE BEEN IGNORED
Meaning
It is not appropriate to select MARK fields when performing a return.
Fields should be selected before calling a follow-up function.
ELS0202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0202 FUNCTION '(&00)' NOT EXECUTED
ELS0210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0210 (&00) RECORDS WRITTEN
Meaning
- The WRITE-HISTORY function has written (&00) HEL file records and/or
SVP file records to the history file.
ELS0211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0211 (&00) RECORDS WRITTEN, (&01) DUPLICATES NOT WRITTEN
Meaning
- The WRITE-HISTORY function has written (&00) HEL file records and/or
SVP file records to the history file.
- Duplicates are records already present in the history file.
Such records are not written to the history file again.
ELS0212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0212 (&00) RECORDS WRITTEN, (&01) SVP READ ERRORS
Meaning
- The WRITE-HISTORY function has written (&00) HEL file records and/or
SVP file records to the history file.
- (&01) results or logouts could not be read from the SVP file because
read errors occurred.
Response
Print out the SVP file using the DETAIL-PROCESSING EDIT or DUMP
function. The printer listing contains an appropriate ELS message for
each read error. The message appears in place of the result or logout
that could not be read.
ELS0213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0213 (&00) RECORDS WRITTEN, (&01) DUPLICATES NOT, (&02) SVP READ ERRORS
Meaning
- The WRITE-HISTORY function has written (&00) HEL file records and/or
SVP file records to the history file.
- Duplicates are records already present in the history file.
Such records are not written to the history file again.
- (&02) results or logouts could not be read from the SVP file because
read errors occurred.
Response
Print out the SVP file using the DETAIL-PROCESSING EDIT or DUMP
function. The printer listing contains an appropriate ELS message for
each read error. The message appears in place of the result or logout
that could not be read.
ELS0220
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0220 (&00) PAGE(S) OF PRINTER LISTING GENERATED
ELS0230
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0230 CPU-type is known - command 'SET-SVP-REFERENCE' ignored
ELS0250
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0250 SCANNING (&00) OF (&01) HEL-FILES DONE
ELS0300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0300 ELSA PROGRAM TERMINATED NORMALLY
ELS0301
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS0301 ELSA PROGRAM TERMINATED ABNORMALLY
ELS1000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1000 START OF FILE REACHED
ELS1001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1001 END OF FILE REACHED
ELS1002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1002 END OF LIST REACHED - DUE: NEXT LIST
ELS1003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1003 START OF LIST REACHED
ELS1004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1004 END OF FUNCTION REACHED - DUE: RETURN
ELS1005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1005 END OF LIST REACHED
ELS1007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1007 END OF SHOW-SELECTION-PARAMETERS REACHED - DUE: RETURN
ELS1009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1009 START OF HELP TEXT REACHED
ELS1010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1010 END OF HELP TEXT REACHED - DUE: RETURN OR NEXT HELP MASK
ELS1011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1011 END OF RECORD REACHED - DUE: NEXT RECORD
ELS1012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1012 START OF RECORD REACHED
ELS1013
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1013 END OF LOGOUT REACHED - DUE: RETURN
ELS1014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1014 START OF LOGOUT REACHED
ELS1020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1020 NO HEL FILE RECORDS FOUND
Meaning
No HEL file records that match the specified selection criteria
were found.
Response
Check selection criteria and, if necessary, restart the analysis.
ELS1021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1021 NO SVP FILE RECORDS FOUND
Meaning
No SVP file records that match the specified selection criteria
were found.
Response
Check selection criteria and, if necessary, restart the analysis.
ELS1022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1022 NEITHER HEL NOR SVP FILE RECORDS FOUND
Meaning
Neither HEL nor SVP file records that match the specified criteria
were found.
Response
Check selection criteria and, if necessary, restart the analysis.
ELS1025
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1025 NO SUITABLE HEL FILE RECORDS FOUND FOR THE STATISTICS FUNCTION '(&00)'
Meaning
A statistics function can analyze only HEL file records appropriate
to the function. No such records were found.
Possible causes:
- There are no appropriate records.
- There are no appropriate records that match the specified
selection criteria.
Response
Check selection criteria and, if necessary, restart the analysis.
ELS1026
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1026 ALL CHECKED VOLUMES ARE WITHIN THE PERMITTED ERROR LIMIT VALUES
Meaning
The SVFL function shows only those volumes that have exceeded one of
the permitted error limit values in at least one processing operation.
No such volumes were found.
ELS1030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1030 TIMESTAMP '(&00)' WAS NOT USED
Meaning
The SUPPRESS-TIMESTAMP-UPDATE statement could not be executed for this
timestamp because this timestamp has not yet been used in the current
program run.
ELS1031
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1031 NO TIMESTAMP WAS USED
Meaning
The SUPPRESS-TIMESTAMP-UPDATE statement could not be executed because
no timestamp has yet been used in the current program run.
ELS1032
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1032 NO TIMESTAMP PRESENT
Meaning
The CTL function cannot be called because no timestamp is present.
ELS1033
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1033 ALL TIMESTAMPS HAVE BEEN DELETED
Meaning
The CTL function has been terminated because you have selected and
thus deleted all timestamps.
ELS1035
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1035 NO TIMESTAMP PRESENT TO BE STORED
Meaning
The CTSU function cannot be called because no timestamp has yet been
used in the current program run.
ELS1036
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1036 STORAGE OF ALL TIMESTAMPS USED HAS BEEN SUPPRESSED
Meaning
The CTSU function has been terminated because you have selected
all timestamps, thus indicating that they are not to be stored.
ELS1100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1100 SVP FILE RECORD CONTAINS NO RESULT OR NO MESSAGE
ELS1101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1101 RESULT ALREADY OVERWRITTEN IN THE SVP HD BECAUSE OF WRAP-AROUND
ELS1102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1102 RESULT NOT FOUND IN THE HISTORY FILE
ELS1110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1110 SVP FILE RECORD CONTAINS NO POINTER TO A LOGOUT
ELS1111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1111 LOGOUT ALREADY OVERWRITTEN IN THE SVP HD BECAUSE OF WRAP-AROUND
ELS1112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1112 LOGOUT NOT FOUND IN THE HISTORY FILE
ELS1200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1200 PLEASE SPECIFY A FUNCTION IN THE 'NEXT' OPERAND
Meaning
You have not selected a function in the NEXT operand.
Response
Enter function ID and try again.
ELS1210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1210 PLEASE SELECT AT LEAST ONE MARK FIELD
ELS1211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1211 PLEASE SELECT AT LEAST ONE MARK FIELD OR PAGE
ELS1212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1212 PLEASE SELECT A MARK FIELD
ELS1213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1213 PLEASE SELECT A MARK FIELD OR PAGE
ELS1214
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1214 PLEASE SELECT 1 TO 5 HEL FILES
ELS1215
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1215 PLEASE SELECT 1 TO 5 HEL FILES OR PAGE
ELS1220
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1220 MORE THAN (&00) HEL FILES, PLEASE DELETE OLDER HEL FILES
Meaning
There are too many HEL files under the TSOS user ID.
Program memory is not sufficient to store the names of all
HEL files.
Response
Delete or rename HEL files no longer required.
ELS1221
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS1221 MORE THAN (&00) FILES, LIMIT SELECTION IN 'FILE' OPERAND
Meaning
There are too many files whose names match the partially qualified
name in the FILE operand.
Program memory is not sufficient to store the names of all files.
Response
Specify a more detailed partial qualification in the FILE operand.
ELS2000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2000 PLEASE CORRECT THE ERRORED OPERANDS
Meaning
There is more than 1 incorrect operand.
Response
Correct the error or use DUE to call the HELP ON CONTEXT function.
ELS2010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2010 INPUT ERROR IN THE 'NEXT' OPERAND
Meaning
The contents of the NEXT operand cannot be identified.
ELS2020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2020 THE FUNCTION KEY '(&00)' IS NOT PERMITTED IN THIS MASK
Meaning
The function keys shown in the penultimate line and the function
key K2 are permitted.
ELS2021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2021 AN INVALID FUNCTION KEY WAS PRESSED
Meaning
ELSA supports only the function keys K1, K2, K3, F1, F2, F3.
ELS2022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2022 THE SPECIFIED FUNCTION CANNOT BE CALLED IN THIS MASK
Meaning
You can find out which functions are permitted by using NEXT=? and
pressing DUE to call the HELP ON CONTEXT function.
ELS2023
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2023 PAGING IS NOT PERMITTED IN THIS MASK
Meaning
The contents of the mask fill only one screen page.
ELS2025
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2025 NO FUNCTION CAN BE CALLED IN THIS MASK
ELS2026
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2026 FUNCTION '(&00)' IS NOT APPLICABLE AS IT PROVIDES NO FURTHER INFORMATION
Meaning
It is not appropriate to call the specified function in this mask as it
would return no additional information. For this reason the function is
not executed.
ELS2030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2030 HISTORY FILE ALREADY CONTAINS SVP FILE RECORDS OF ANOTHER SYSTEM TYPE
Meaning
It is not possible to mix SVP file records of different system types
in the same history file.
ELS2040
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2040 'START-MENU-MODE' STATEMENT IS NOT PERMITTED IN BATCH MODE
Meaning
The START-MENU-MODE statement terminates command mode and starts
menu mode. Menu mode cannot run in batch operation.
ELS2045
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2045 'START-FUNCTION' STATEMENT ILLEGAL AFTER 'SET-INOUT OUTPUT=TERMINAL'
Meaning
The START-FUNCTION statement starts a function in command mode.
Output type OUTPUT=TERMINAL is permitted only for menu mode.
Response
Use the START-MENU-MODE statement instead of the START-FUNCTION
statement, i.e. terminate command mode and start the function in menu
mode.
ELS2050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2050 THERE IS NO PRINTER LISTING FOR THE FUNCTION '(&00)'
ELS2090
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2090 CANNOT CALL THE 'HELP ON MASK' FUNCTION
Meaning
Possible causes:
- ELSA not fully installed
- System error.
Response
Inform the system administrator.
ELS2091
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2091 CANNOT CALL THE 'HELP ON CONTEXT' FUNCTION
Meaning
Possible causes:
- ELSA not fully installed
- System error.
Response
Inform the system administrator.
ELS2092
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2092 CANNOT CALL THE HELP FUNCTION FOR THE SELECTED KEYWORD
Meaning
Possible causes:
- ELSA not fully installed
- System error.
Response
Inform the system administrator.
ELS2093
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2093 '?' AND 'H' NOT PERMITTED TO REQUEST HELP WITHIN THE HELP FUNCTIONS
ELS2094
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2094 ONLY PAGE-BY-PAGE SCROLLING IS PERMITTED IN THIS MASK (+/-/++/--)
Meaning
Output consists of a number of sections each requiring a whole
screen page. For this reason line-by-line scrolling using '+n' and
'-n' is not permitted.
ELS2100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2100 MASK CONTAINS AN ILLEGAL CONTROL CHARACTER (E.G.: START MARKER)
Meaning
Certain control characters cannot be processed by FHS.
Response
Remove the control characters from the mask.
ELS2190
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2190 OUT OF CLASS 6 MEMORY
Meaning
The volume of input data for analysis is too large.
Response
Limit the input data by using suitable selection criteria.
ELS2191
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2191 MAXIMUM SIZE OF TABLES EXCEEDED IN ELSA PROGRAM
Meaning
The volume of input data for analysis is too large.
Response
Limit the input data by using suitable selection criteria.
ELS2200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2200 OPERAND '(&00)' IS INCORRECT
Meaning
The next message describes the error.
ELS2210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2210 TIME SPECIFICATION IS INVALID
Meaning
Valid entries:
- Absolute : yymmddhhmmss.
(FROM,TO) part entries are accepted, e.g. yymm.
(yy: year, mm: month etc.).
- Relative : -0,-1,...,-99 in menu mode,
(FROM) C'-0',...,C'-99' in command mode.
(-n: today 0 hrs minus n days).
- Timestamp : up to 8-character string starting with a
(FROM) letter or $, #, @. Digits are also permitted.
ELS2211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2211 RELATIVE TIME SPECIFICATION IS WRONG - VALID VALUES: -0,-1,...,-99
Meaning
The first character in the DATE/TIME FROM (or DATE-TIME-FROM) operand
is a minus sign. ELSA therefore identified the entry as a relative
time specification (-n).
The values -0,-1,...,-99 are permitted as relative time entries.
ELS2212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2212 RELATIVE TIME SPECIFICATION IS TOO LARGE - VALID VALUES: -0,-1,...,-99
Meaning
The first character in the DATE/TIME FROM (or DATE-TIME-FROM) operand
is a minus sign. ELSA therefore identified the entry as a relative
time specification (-n).
The values -0,-1,...,-99 are permitted as relative time entries.
ELS2213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2213 START OF ANALYSIS PERIOD (FROM) GREATER THAN END (TO)
ELS2214
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2214 YEAR SPECIFICATION INVALID - VALID VALUES: 60-99,00-39 (= 1960-2039)
ELS2215
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2215 MONTH SPECIFICATION IS INVALID - VALID VALUES: 01-12
ELS2216
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2216 DAY SPECIFICATION IS INVALID OR INCOMPATIBLE WITH MONTH SPECIFICATION
ELS2217
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2217 HOURS SPECIFICATION IS INVALID - VALID VALUES: 00-23
ELS2218
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2218 MINUTES SPECIFICATION IS INVALID - VALID VALUES: 00-59
ELS2219
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2219 SECONDS SPECIFICATION IS INVALID - VALID VALUES: 00-59
ELS2230
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2230 TIMESTAMP CONTAINS ILLEGAL CHARACTERS - VALID: A-Z,$,#,@,0-9
Meaning
The first character in the DATE/TIME FROM (or DATE-TIME-FROM) operand
is a letter or $, #, @. ELSA therefore identified the entry as a
timestamp.
Further permitted characters are letters, $, #, @ and digits.
ELS2231
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2231 SPECIFIED TIMESTAMP IS TOO LONG - MAXIMUM LENGTH: 8 CHARACTERS
Meaning
The first character in the DATE/TIME FROM (or DATE-TIME-FROM) operand
is a letter or $, #, @. ELSA therefore identified the entry as a
timestamp.
A timestamp may be up to 8 characters long.
ELS2250
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2250 '(&00)' IS NOT A VALID PRIORITY - VALID: H,M,L,- (=NO PRIORITY)
Meaning
Valid entries:
- Menu mode : H,M,L,-
- Command mode : H,M,L,C'-'
ELS2255
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2255 '(&00)' IS NOT A VALID ATTRIBUTE - VALID: C,U,D,H,O,T,- (=NO ATTRIBUTE)
Meaning
Valid entries:
- Menu mode : C,U,D,H,O,T,-
- Command mode : C,U,D,H,O,T,C'-'
ELS2260
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2260 '(&00)' IS NOT A VALID INPUT SPECIFICATION - VALID VALUES: H,S,B
Meaning
Valid entries:
- Menu mode : H,S,B
- Command mode : HEL-DATA, SVP-DATA, BOTH
(Entries can be abbreviated to the first
character, i.e.: H,S,B).
ELS2261
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2261 SVP ANALYSIS IS NOT AVAILABLE ON THIS SYSTEM
Meaning
The specification INPUT=SVP-DATA is not permitted because SVP
analysis was not supplied for this BS2000 system.
SVP analysis is only supplied for BS2000 systems for which a
service contract has been concluded or for which the Test and
Diagnosis System has been purchased.
ELS2265
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2265 '(&00)' IS NOT A VALID OUTPUT SPECIFICATION - VALID VALUES: T,P
Meaning
Valid entries:
- Menu mode : T,P
- Command mode : TERMINAL, PRINTER
(Entries can be abbreviated to the first
character, i.e.: T,P).
ELS2266
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2266 PRINTER NAME '(&00)' INVALID OR NOT DEFINED
Meaning
Possible causes:
- Printer name contains illegal characters. Valid chars: A-Z,$,#,@,0-9.
- The printer is not defined in the SPOOL parameter file.
Response
Correct the entry or inform the system administrator.
ELS2267
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2267 FORM NAME '(&00)' INVALID OR NOT (FULLY) DEFINED
Meaning
Possible causes:
- Form name contains illegal characters. Valid chars: A-Z,$,#,@,0-9.
- The form is not defined or is not fully defined in the
SPOOL parameter file.
Response
Correct the entry or inform the system administrator.
ELS2268
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2268 '(&00)' IS NOT A VALID SIZE SPECIFICATION - VALID VALUES: 132,80
Meaning
Valid entries:
- Menu mode : 132, 80
- Command mode : 132, 80
ELS2270
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2270 ILLEGAL CHARACTER IN HEL SEQ NUM INTERVAL '(&00)' - VALID: 0-9,A-F
ELS2271
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2271 HEL SEQ NUM INTERVAL: START (FROM) GREATER THEN END (TO)
ELS2275
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2275 '(&00)' IS NOT A VALID RECORD CLASS/RECORD ID
Meaning
Valid entries:
- RECORD CLASS : M,C,I,R,D,T,H,L and A (= ALL ERRORS, M+C+I+R+D)
- RECORD ID : 13,20,24,25,30,40,50,70,90
ELS2280
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2280 '(&00)' IS NOT A VALID DEVICE TYPE
Meaning
Valid entries:
- Two-character hex. number, e.g. AC,C1,E2 etc.
- Four-character hex. number, e.g. 2124,212B etc.
- Partially qualified entry, e.g. A*,21*,21// etc.
ELS2285
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2285 '(&00)' IS NOT A VALID DEVICE MNEMONIC
Meaning
Valid entries:
- Alphanumeric string
- Partially qualified entry, e.g. TP*
ELS2290
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2290 '(&00)' IS NOT A VALID PATH ADDRESS
Meaning
Valid entries:
- Hexadecimal string, e.g. 2B000031
- Partially qualified entry, e.g. 2B*,2B////31
ELS2295
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2295 ILLEGAL CHARACTER IN ERROR MNEMONIC '(&00)' - VALID: A-Z
ELS2300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2300 ILLEGAL CHARACTER IN DER STAMP '(&00)' - VALID: A-Z,0-9
ELS2305
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2305 ILLEGAL CHARACTER IN TSN '(&00)' - VALID: A-Z,0-9
ELS2310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2310 ILLEGAL CHARACTER IN VSN '(&00)' - VALID: $,#,@,.,A-Z,0-9
ELS2315
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2315 ILLEGAL CHARACTER IN SVP SEQ NUM INTERVAL '(&00)' - VALID: 0-9,A-F
ELS2316
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2316 SVP SEQ NUM INTERVAL: START (FROM) GREATER THEN END (TO)
ELS2320
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2320 '(&00)' IS NOT A VALID UNIT
Meaning
There is no such unit on the systems supported by ELSA.
Response
In menu mode call the HELP ON CONTEXT function using UNIT=? and
DUE or refer to the unit table in the ELSA manual.
ELS2350
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2350 BYTE NUMBER '(&00)' SPECIFIED TWICE
ELS2351
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2351 BYTE NUMBER '(&00)' IS ILLEGAL - VALID: 000,001,...,255
ELS2352
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2352 BIT MASK NOT SPECIFIED FOR BYTE '(&00)'
ELS2353
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2353 OUT OF VALUE RANGE (000,001,...,255) FOR BYTE NUMBER
ELS2354
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2354 FILE NAME OF HISTORY FILE WAS NOT SPECIFIED
ELS2355
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2355 PARTIALLY QUALIFIED FILE NAME NOT PERMITTED
ELS2356
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2356 '(&00)' IS NOT A VALID WRITE MODE - VALID: N,O,E
Meaning
Valid entries:
- Menu mode : N,O,E
- Command mode : NEW, OVERWRITE, EXTEND
(Entries can be abbreviated to the first
character, i.e.: N,O,E).
ELS2357
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2357 NEITHER 'Y' NOR 'N' WAS SPECIFIED IN THE 'EXTENDED-SVP-DATA' OPERAND
Meaning
'Y' (YES) or 'N' (NO) must be specified.
ELS2358
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2358 NEITHER 'Y' NOR 'N' WAS SPECIFIED FOR 'SAVE-CPU-TYPE' OPERAND
Meaning
'Y' (YES) or 'N' (NO) must be specified.
ELS2500
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2500 CONFLICT BETWEEN RECORD CLASS/RECORD ID AND REMAINING SELECTION CRITERIA
Meaning
Specifying device-specific selection criteria (DEVICE TYPE etc.) results
in an implicit restriction of the record class and record ID.
This restriction conflicts with the entries for RECORD CLASS/RECORD ID.
ELS2501
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2501 SELECTION MASK INPUT CONFLICTS WITH ENTRIES IN RECORD CLASS/RECORD ID
Meaning
Selection mask input restricts analysis to records of record class D
and L or record ID 30 and 90. This restriction conflicts with the
entries in the RECORD-CLASS/RECORD-ID operand.
Response
Delete entries for RECORD CLASS/RECORD ID and try again.
ELS2504
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2504 STATISTICS FUNCTIONS NOT PERMITTED WHEN SELECTING SVP DATA
Meaning
The statistics functions analyze HEL file records. There are no such
functions for SVP file records. If you set INPUT=B (or INPUT=BOTH)
and specify selection criteria exclusively for SVP file records,
analysis will be restricted to SVP file records and HEL file records
will be excluded from the analysis. It is not therefore appropriate
to call statistics functions.
ELS2505
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2505 STATISTICS FUNCTIONS ONLY FOR HEL DATA (NOT FOR INPUT=S)
Meaning
The statistics functions analyze HEL file records. There are no such
functions for SVP file records. If you set INPUT=S (or INPUT=SVP-DATA)
HEL file records will be excluded from the analysis. It is not therefore
appropriate to call statistics functions.
ELS2506
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2506 SELECTION MASK INPUT ONLY FOR HEL DATA (NOT FOR INPUT=S)
Meaning
Selection masks concern only HEL file records of record class D
(DEVICE ERROR) and L (CONTROLLER LOG DATA).
If you set INPUT=S (or INPUT=SVP-DATA) HEL file records will be excluded
from the analysis. It is not therefore appropriate to call statistics
functions.
ELS2510
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2510 UNIT '(&00)' ILLEGAL FOR SYSTEM TYPE FROM WHICH THE DATA ORIGINATES
Meaning
There is no corresponding unit on the system in question whose SVP file
records are to be analyzed.
Response
In menu mode call the HELP ON CONTEXT function using UNIT=? and
DUE or refer to the unit table in the ELSA manual.
ELS2515
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2515 SVP-SEQ-NUM ILLEGAL FOR THE SYSTEM TYPE FROM WHICH THE DATA ORIGINATES
Meaning
There are no hexadecimal SVP sequence numbers on the system in question
whose SVP file records are to be analyzed.
ELS2600
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2600 MORE THAN 5 HEL FILES HAVE BEEN SELECTED
ELS2601
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2601 MORE THAN 1 FILE HAS BEEN SELECTED
ELS2605
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2605 MORE THAN 1 REFERENCE TYPE HAS BEEN SELECTED
ELS2700
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2700 'START-FUNCTION' STATEMENT ILLEGAL AFTER 'SET-INOUT FILE=<PARTQUAL>'
Meaning
The START-FUNCTION statement is illegal if a partially qualified file
name was specified in the FILE operand of a preceding SET-INOUT
statement. A partially qualified file name is, however, permitted before
the START-MENU-MODE statement.
ELS2701
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2701 'START-FUNCTION' STATEMENT LOCKED AFTER ERRORED STATEMENT
Meaning
The START-FUNCTION statement cannot be executed because one or more
errors have occurred in the preceding statements.
Response
Correct statements and try again.
ELS2702
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2702 'START-MENU-MODE' STATEMENT LOCKED AFTER ERRORED STATEMENT
Meaning
The START-MENU-MODE statement cannot be executed because one or more
errors have occurred in the preceding statements.
Response
Correct statements and try again.
ELS2710
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2710 SPECIFIED SDF STANDARD STATEMENT IS ILLEGAL
ELS2715
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2715 SPECIFIED STATEMENT ONLY ALLOWED FOR INTERNAL USE
ELS2720
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2720 'END' STATEMENT MISSING - BS2000 COMMAND OR SYSDTA EOF OCCURRED
ELS2730
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS2730 SPECIFIED STATEMENT TOO LONG - MAXIMUM LENGTH: 2044 CHARACTERS
ELS3000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3000 NO HEL FILE/HISTORY FILE MATCHES THE PARTIALLY QUALIFIED FILE NAME
Meaning
There are files with matching file names. However, the catalog entries
of these files indicate that they are neither HEL files nor history
files.
ELS3001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3001 NO HEL FILES PRESENT
Meaning
No HEL files are cataloged under TSOS, i.e. there is no file named
$TSOS.SYS.HEL.yyyy-mm-dd.hhmmss.
ELS3002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3002 NO VM-GLOBAL HEL FILES OF VM2000 PRESENT
Meaning
No VM-global HEL files of VM2000 are cataloged under the TSOS
of the current virtual machine, i.e. there is no file named
$TSOS.SYS.VMHEL.yyyy-mm-dd.hhmmss.
ELS3003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3003 NO HISTORY FILE MATCHES THE PARTIALLY QUALIFIED FILE NAME
Meaning
There are files with matching file names. However, the catalog entries
of these files indicate that they are not history files.
ELS3010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3010 SPECIFIED HEL FILES COULD NOT BE OPENED
Meaning
The cause of the error is shown in the mask next to the appropriate
file name.
ELS3011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3011 CURRENT HEL FILE COULD NOT BE OPENED
Meaning
The cause of the error is shown in the mask next to the appropriate
file name.
ELS3015
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3015 THE CURRENT HEL FILE IS EMPTY - FUNCTION TERMINATED
Meaning
A change of HEL file has just taken place. The new HEL file is still
empty.
Response
Restart the analysis and, if necessary, specify an analysis period.
ELS3020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3020 ALL RELEVANT HEL FILES ARE EMPTY - FUNCTION TERMINATED
Meaning
Possible causes:
- All HEL files for the appropriate analysis period are empty.
- The HEL files you have selected are empty.
Response
Restart the analysis for another analysis period or with other HEL
files.
ELS3021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3021 FILE IS NEITHER A HEL FILE NOR A HISTORY FILE
Meaning
The catalog entry of the specified file indicates that it is
neither a HEL file nor a history file.
ELS3022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3022 FILE IS AN OLD HERSFILE - ANALYZE USING THE ELT/ELP PROGRAM
Meaning
The contents of the file indicate that it is an old HERSFILE.
Response
You can analyze the file using the ELT and ELP programs.
ELS3023
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3023 FILE IS AN OLD HERS HISTORY FILE - ANALYZE USING THE ELT/ELP PROGRAM
Meaning
The contents of the file indicate that it is an old HERS history
file.
Response
You can analyze the file using the ELT and ELP programs.
ELS3024
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3024 FILE IS AN OLD HARDDISK HISTORY FILE - ANALYZE USING THE ELT/ELP PROGRAM
Meaning
The contents of the file indicate that it is an old HARDDISK history
file.
Response
You can analyze the file using the ELT and ELP programs.
ELS3025
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3025 THE FILE SPECIFIED IN THE 'OUTPUT-FILE' OPERAND ALREADY EXISTS
Meaning
WRITE-MODE=N(EW) has been used to create the specified history file.
This is not possible, however, as a file with the specified name
already exists.
Response
Use WRITE-MODE=O(VERWRITE) or select a different file name.
ELS3027
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3027 FILE IS NOT A HISTORY FILE CREATED BY THE ELSA PROGRAM
Meaning
WRITE-MODE=E(XTEND) has been used to extend the specified history file.
This is not possible, however, as the file is not a history file created
by the ELSA program.
Response
Use WRITE-MODE=O(VERWRITE) or select a different file name.
ELS3030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3030 FILE IS NOT A HISTORY FILE AND THEREFORE CONTAINS NO SVP FILE RECORDS
ELS3040
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3040 UNKNOWN CPU-TYPE - HISTORY FILE COULD NOT BE EXTENDED
Meaning
Using WITE-MODE=E(XTEND) a specified history file is extended.
In this case the extension is not possible, because the correct
system name could not be ascertained due to a system inconsistency.
Response
Use WRITE-MODE=O(VERWRITE) or a new filename.
Inform the system administrator.
ELS3200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3200 CONFIGURATION FILE '(&00)' IS INVALID
Meaning
Possible causes:
1) The file was not closed properly because of a system crash.
2) The file is not a configuration file generated by the ELSA program.
Response
Re 1) Reconstruct the file using the BS2000 command REPAIR-DISK-FILES.
Re 2) Delete the file. The configuration file will be regenerated
automatically the next time the ELSA program is started.
Using the link name ELSACON it is possible to specify any other file
name for the configuration file.
ELS3201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS3201 CONFIGURATION FILE '(&00)' LOCKED FOR LONGER THAN 1 MINUTE
Meaning
The file has been locked by another user.
Response
Try again later or use a different configuration file (using the
link name ELSACON).
ELS4000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4000 SVP ACCESS ERROR (&00): RC='(&01)' SC1='(&02)' SC2='(&03)'
Meaning
Error in accessing SVP HD via the ADAM device interface.
The error codes RC, SC1, SC2 have the following meaning:
- RC : ADAM return code
- SC1 : ADAM subcode 1
- SC2 : ADAM subcode 2
The exact meaning of the error codes is given in the ADAM manual.
Response
Inform the system administrator.
ELS4001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4001 SVP ACCESS ERROR (&00): RC='(&01)' SB1='(&02)' SB2='(&03)'
Meaning
Error in accessing SVP HD via the ADAM device interface.
The error codes RC, SB1, SB2 have the following meaning:
- RC : ADAM return code
- SB1 : ADAM status byte 1
- SB2 : ADAM status byte 2
The exact meaning of the error codes is given in the ADAM manual.
Response
Inform the system administrator.
ELS4005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4005 MORE ERRORS HAVE OCCURED IN ACCESSING SVP-HD'S: (&00),(&01),..
Meaning
More errors have occured in accessing SVP HD's via the ADAM device
interface. Mnemonics of the first two failling harddisks are given in
the message.
Response
Inform the system administrator.
ELS4010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4010 SVP-HD HAS NOT BEEN GENERATED WITH DEVICE NAME '(&00)'
Meaning
The SVP HD has not been generated or has been generated with an
invalid name.
Response
Inform the system administrator.
Refer to the installation instructions for the correct name of SVP HD.
ELS4011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4011 SVP-HD HAS NOT BEEN GENERATED WITH DEVICE TYPE '(&00)'
Meaning
The SVP HD has not been generated or has been generated with an
invalid symbolic type name.
Response
Inform the system administrator.
For correct type name of SVP HD refer to installation instructions.
ELS4012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4012 SVP HD (&00) RESERVED OR NOT AVAILABLE
Meaning
Possible causes:
1) The SVP HD is currently not available; e.g. locked by a MART transfer.
2) Has the privilege "HW-MAINTENANCE" been set for the current user ID ?
Response
Try again later or inform the system administrator.
ELS4013
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4013 DEVICE-SPECIFIC ADAM MODULE '(&00)' NOT AVAILABLE
Meaning
ADAM module library not available or wrong version.
Response
Inform the system administrator.
ELS4014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4014 SVP HD (&00) TIMEOUT
Meaning
The SVP HD is currently not available.
Response
Try again later.
ELS4016
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4016 SVP HD (&00) NOT PRESENT OR NOT AVAILABLE
Meaning
Possible causes:
- The SVP HD has not been generated.
- The SVP HD has been incorrectly generated.
- The SVP HD hardware unit is DETACHED.
Response
Inform the system administrator.
ELS4100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4100 ADAM IS NOT AVAILABLE
Meaning
ADAM subsystem is not available in the system environment.
Response
Inform the system administrator.
ELS4210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4210 SVP HD READ ERROR: REPORT BLOCK RC = '(&00)', CB = '(&01)'
Meaning
Error in SVP HD access.
For further information on REPORT BLOCK and CB (control block)
refer to SVP description.
ELS4215
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4215 ERRORS IN SVP DATA READ
Meaning
The SVP HD contains inconsistent data.
ELS4300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4300 SVP ANALYSIS IS NOT SUPPORTED ON THIS SYSTEM
Meaning
Possible causes:
- Analysis of the SVP data for your system type is not supported
in the current version of ELSA.
- The correct system name could not be ascertained because of
a system inconsistency.
Response
If possilbe, specify a SVP reference type (CPU-types, which have this
option, are published in Service Informations); in command mode you
can specify a reference type with the command 'SET-SVP-REFERENCE'.
ELS4310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4310 SVP ANALYSIS OF SPECIFIED HISTORY FILE NOT POSSIBLE
Meaning
The specified history file contains a system type that is not
supported in the current version of ELSA.
Response
Use a more recent version of ELSA.
ELS4900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS4900 SVP HD (&00) RESERVED (SERIALIZATION)
Meaning
Another ELS user has locked the SVP HD for longer than 10 minutes.
Response
Try again later.
ELS5000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5000 DMS-ERROR '(&00)' FROM FILENAME '(&01)'
Meaning
A DMS error with the specified DMS error code DMSnnnn has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMSnnnn.
ELS5001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5001 FILE NOT FOUND
Meaning
A DMS error with the DMS error code DMS0D33 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0D33.
ELS5002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5002 FILE IS EMPTY
Meaning
A DMS error with the DMS error code DMS0D9A has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0D9A.
ELS5003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5003 USER-ID DOES NOT EXIST
Meaning
A DMS error with the DMS error code DMS05FC has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS05FC.
ELS5004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5004 INVALID PATHNAME
Meaning
A DMS error with the DMS error code DMS05B7 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS05B7.
ELS5005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5005 NO FILE CORRESPONDING TO SPECIFIED OPERANDS
Meaning
A DMS error with the DMS error code DMS06CC has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS06CC.
ELS5006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5006 FILE NOT SHAREABLE
Meaning
A DMS error with the DMS error code DMS0535 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0535.
ELS5007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5007 CATALOG CANNOT BE FOUND
Meaning
A DMS error with the DMS error code DMS0512 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0512.
ELS5008
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5008 IT IS NOT ALLOWED TO CREATE A FILE ON A FOREIGN USER-ID
Meaning
A DMS error with the DMS error code DMS055E has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS055E.
ELS5009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5009 FILE IS PASSWORD-PROTECTED
Meaning
A DMS error with the DMS error code DMS05D8 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS05D8.
ELS5010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5010 FILE IS WRITE-PROTECTED OR ALREADY IN USE
Meaning
A DMS error with the DMS error code DMS0D99 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0D99.
ELS5011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5011 FILE IS LOCKED BECAUSE CURRENTLY IN USE
Meaning
A DMS error with the DMS error code DMS05B1 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS05B1.
ELS5012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5012 FILE NAME INVALID OR MISSING
Meaning
A DMS error with the DMS error code DMS0554 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0554.
ELS5050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5050 NOT ENOUGH DISC-MEMORY
Meaning
A DMS error with the DMS error code DMS0AA4 has occurred.
For further information use the BS2000 command HELP-MSG-INFO DMS0AA4.
ELS5099
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS5099 FILE: '(&00)'
Meaning
Name of file to which the preceding error message refers.
ELS9000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9000 FATAL ERROR: RC '(&00)' FROM '(&01)' - CALLED AT '(&02)'
ELS9001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9001 MACRO ERROR: RC X'(&00)' FROM '(&01)' - CALLED AT '(&02)'
ELS9002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9002 MSG BUFFER OVERFLOW
Meaning
ELSA was called as a subroutine. Insufficient memory has been reserved
for the message buffer in the main program.
ELS9003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9003 FHS ERROR: MAIN RC=(&00),ERROR CATEGORY=(&01),ERROR REASON=(&02)
Meaning
Error in mask input/output using FHS.
The specified error codes have the following meaning:
- MAIN RC : primary return code
- ERROR CATEGORY : error category
- ERROR REASON : cause of error
The exact meaning of the error codes is given in the FHS manual.
Response
Inform the system administrator.
ELS9004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9004 ILLEGAL CODE IN MODULE '(&00)'
ELS9010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9010 ERROR IN PRINT CALL : R15 = X'(&00)'
Meaning
An error has occurred when calling the PRNT macro.
For return code R15 refer to EXECUTIVE MACROS.
Response
Inform the system administrator.
ELS9011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9011 ERROR IN OUTPUT TO SYSLST : R15 = X'(&00)'
Meaning
An error has occurred when calling the WRLST macro.
For return code R15 refer to EXECUTIVE MACROS.
Response
Inform the system administrator.
ELS9020
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9020 INTEGRATION ERROR: ERROR WHEN USING SYSTEM SYNTAX FILE
Meaning
Possible causes:
- installation of ELSA incomplete.
- ELSA has assigned an invalid version of the system syntax file.
- system error.
Response
Inform the system administrator.
ELS9200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
ELS9200 ELSA CANNOT BE EXECUTED IN THIS BS2000 VERSION
Meaning
The ELSA program requires BS2000 V11.0A or higher.