Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDTCOPY Copyright (C) (&01) (&00) All Rights Reserved
EDTLOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDTLOAD Program '(&00)', Version '(&01)' of '(&02)' loaded from file '(&03)'
EDTSTRT
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDTSTRT Procedure '(&00)', Version '(&01)' of '(&02)' started from file '(&03)'
EDT0001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0001 (&00) STARTED
Meaning
EDT was started.
EDT0002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0002 (&00) RESTARTED IN COMPATIBILITY MODE
Meaning
A statement changing the operation mode was given. EDT was restarted in
compatibility mode.
EDT0003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0003 (&00) RESTARTED IN UNICODE MODE
Meaning
A statement changing the operation mode was given. EDT was restarted in
Unicode mode.
EDT0100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0100 TESTMODE: NO SYNTAX ERROR
Meaning
Test mode is set. There was no syntactical error. The statements have not
been processed.
Error switch: not set.
EDT0110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0110 TESTMODE: SYNTAX CANNOT BE TESTED
Meaning
Test mode is set. The statement has not been processed. But its syntax can
only be tested at run time.
Possible reasons: indirect operands, operands in variables or
user statements.
Error switch: not set.
EDT0120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0120 TESTMODE: CHARACTER(S) SKIPPED
Meaning
Test mode is set. The syntax check in line mode skipped one or more
characters. A strict syntax check with the option SECURITY=HIGH would
possibly find an error.
Error switch: not set.
Response
See your EDT manual for the correct syntax of the statement. Correction
to the therein described form will ensure processing in following EDT
versions. The support of this statement is not guaranteed.
EDT0160
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0160 FILE '(&00)' WRITTEN
EDT0170
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0170 MEMBER '(&00)' IN LIBRARY '(&01)' REPLACED AND WRITTEN
Meaning
The old content of the library element was replaced.
EDT0171
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0171 FILE '(&00)' REPLACED AND WRITTEN
Meaning
The old content of the file was replaced.
EDT0172
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0172 MEMBER '(&00)' IN LIBRARY '(&01)' CREATED AND WRITTEN
Meaning
The library element was created and written.
EDT0173
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0173 FILE '(&00)' CREATED AND WRITTEN
Meaning
The file was created and written.
EDT0178
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0178 FILE '(&00)' CLOSED
EDT0190
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0190 WORK FILE (&00) EMPTY
EDT0193
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0193 WORK FILE (&00) CLEARED
EDT0196
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0196 UFS FILE '(&00)' REPLACED AND WRITTEN
Meaning
The old content of the POSIX file was replaced.
EDT0197
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0197 UFS FILE '(&00)' CREATED AND WRITTEN
Meaning
The POSIX file was created and written.
EDT0200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0200 CCS CHANGED TO '(&00)'
Meaning
By reading or opening a file or library element with the attribute (&00)
EDT uses this Coded Character Set.
Error switch: not set.
EDT0210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0210 ELEMENT(S) ADDED TO S-VARIABLE '(&00)'
Meaning
The SDF-P list variable (&00) has been extended by appending or
prefixing one or more elements to the list.
EDT0211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0211 /FREE-VARIABLE COMMAND PROCESSED FOR S-VARIABLE '(&00)'
Meaning
The contents of the SDF-P variable (&00) have been destroyed. In the
given statement @SETLIST with operand MODE=NEW the specified range did
not contain any line or column.
EDT0227
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0227 ISAM FILE '(&00)' CREATED AND OPENED IN WORK FILE (&01)
Meaning
The ISAM file was created and opened in actual work file.
EDT0228
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0228 ISAM FILE '(&00)' REPLACED AND OPENED IN WORK FILE (&01)
Meaning
The old content of the ISAM file was deleted, then the file was opened in
actual work file.
EDT0229
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0229 ISAM FILE '(&00)' OPENED IN WORK FILE (&01)
Meaning
The ISAM file was opened in actual work file.
EDT0230
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0230 FILE '(&00)' OPENED IN CURRENT WORK FILE (&01)
Meaning
The file was opened in actual work file.
EDT0231
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0231 FILE '(&00)' CREATED AND OPENED IN CURRENT WORK FILE (&01)
Meaning
The file was created and opened in actual work file.
EDT0232
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0232 FILE '(&00)' REPLACED AND OPENED IN WORK FILE (&01)
Meaning
The old content of the file was deleted, then the file was opened in
actual work file.
EDT0235
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0235 FILE '(&00)' WRITTEN AND CLOSED
Meaning
The file was written and closed.
EDT0236
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0236 FILE '(&00)' CLOSED UNCHANGED
Meaning
The file was closed unchanged.
EDT0237
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0237 UFS FILE '(&00)' OPENED
Meaning
The POSIX file was opened in actual work file.
EDT0238
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0238 UFS FILE '(&00)' CREATED AND OPENED
Meaning
The POSIX file was created and opened in actual work file.
EDT0239
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0239 UFS FILE '(&00)' REPLACED AND OPENED
Meaning
The old content of the POSIX file was deleted, then the file was opened in
actual work file.
EDT0240
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0240 UFS FILE '(&00)' CLOSED
Meaning
The POSIX file was written and closed.
EDT0241
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0241 UFS FILE '(&00)' CLOSED UNCHANGED
Meaning
The POSIX file was closed unchanged.
EDT0242
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0242 FILE '(&00)' COPIED
Meaning
The file was copied into the actual work file.
EDT0243
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0243 UFS FILE '(&00)' COPIED
Meaning
The POSIX file was copied into the actual work file.
EDT0244
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0244 ALLOW WRITE ACCESS FOR READ ONLY FILE? REPLY (Y=YES; N=NO)
Meaning
This query is issued following a @OPEN, @WRITE, @XOPEN or @XWRITE
statement if the POSIX file is read only and the current user id is TSOS.
Response
Y: the file will be overwritten/opened for writing
N: the file will not be overwritten/opened for writing.
EDT0258
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0258 MEMBER '(&00)' IN LIBRARY '(&01)' OPENED
Meaning
The library element was opened in actual work file.
EDT0259
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0259 MEMBER '(&00)' IN LIBRARY '(&01)' CREATED AND OPENED
Meaning
The library element was created and opened in actual work file.
EDT0264
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0264 MEMBER '(&00)' IN LIBRARY '(&01)' WRITTEN AND CLOSED
Meaning
The library element was written and closed.
EDT0265
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0265 MEMBER '(&00)' IN LIBRARY '(&01)' CLOSED UNCHANGED
Meaning
The library element was closed unchanged.
EDT0266
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0266 WORK FILE EMPTY: MEMBER '(&00)' CLOSED UNCHANGED
Meaning
The work file specified in the CLOSE or WRITE statement is empty.
The member (&00) has been closed but not written back.
EDT0268
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0268 MEMBER '(&00)' IN LIBRARY '(&01)' OPENED FOR REPLACEMENT
Meaning
The library element was opened in actual work file, the old content was
not read.
EDT0274
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0274 MEMBER '(&00)' IN LIBRARY '(&01)' COPIED
Meaning
The library element was copied into the actual work file.
EDT0281
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0281 /DELETE-FILE COMMAND PROCESSED FOR FILE '(&00)'
Meaning
The file has been erased from catalog.
EDT0282
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0282 DELETE PROCESSED FOR MEMBER '(&00)'
Meaning
The element has been deleted from library.
EDT0283
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0283 UFS FILE '(&00)' DELETED
Meaning
The POSIX file has been removed from its directory.
EDT0285
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0285 SDF: SYNTAX TESTED. (&00) ERROR(S) IN RANGE
Meaning
At the processing of statement @SDFTEST (&00) errors have been detected.
Error switch: not set.
EDT0290
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0290 ALL LINES ARE DIFFERENT
Meaning
All lines to be compared are different.
Error switch: EDT.
EDT0291
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0291 ALL LINES ARE EQUAL
Meaning
All lines to be compared are equal.
Error switch: not set.
EDT0292
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0292 COPY BUFFER CLEARED
Meaning
Acknowledgement following an '*' in the mark column.
EDT0293
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0293 FILE NOT WRITTEN
Meaning
N has been specified in response to an OVERWRITE inquiry.
EDT0294
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0294 MAXIMUM LINE NUMBER
Meaning
The screen cannot be completely filled with empty lines after the last
used line, as not enough line numbers are available.
EDT0295
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0295 OLD COPY BUFFER CLEARED, NEW COPY BUFFER FILLED
Meaning
An R statement code is followed by a C or M statement code.
The copy buffer created by means of R statement code(s) has been cleared.
EDT0296
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0296 OVERWRITE FILE? REPLY (Y=YES; N=NO)
Meaning
This query is issued following a @WRITE or a @SAVE statement if the file
already exists.
Response
Y: the file will be overwritten
N: the file will not be overwritten.
EDT0297
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0297 COMPARE RESULT IN WORK FILE (&00)
Meaning
The result of a successfully processed @COMPARE statement (format 2)
is output to work file (&00).
Error switch: EDT.
EDT0298
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0298 ERASE ALL JOB VARIABLES '(&00)'? REPLY (Y=YES; N=NO)
Meaning
This query is issued following a @ERAJV statement, if the name was
specified partially qualified or in wildcard syntax and this refers
to more than one job variable.
Response
Y: all job variables concerned will be erased from the catalog.
N: the statement will be aborted and no job variable will be erased.
EDT0299
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0299 JOB VARIABLES NOT ERASED
Meaning
Message EDT0298 (ERASE ALL JOB VARIABLES?) was answered with N.
EDT0300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0300 (&00)
Meaning
Following a @TMODE statement, the task attributes are displayed
from left to right in this order:
TSN - task sequence number
USER ID - user ID in the /LOGON command
ACCOUNT - account number of the task
CPU TIME - CPU time used for the task
DATE - date (YYYY-MM-DD)
TIME - time (HH:MM:SS)
STATEMENT SYMBOL - actual statement symbol
TERMINAL - type of terminal.
EDT0610
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0610 BUFFER SIZE UNCHANGED
Meaning
The buffer for output to the screen could not be changed by EDT.
Error switch: not set.
EDT0650
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0650 UNABLE TO SUPPORT NATIONAL TERMINAL. STANDARD WILL BE USED
Meaning
The connected DSS is a national 7-bit terminal, but EDT can only support
it with standard functions. Possible reasons:
- The DSS has been generated with wrong parameters or a variant has been
used EDT cannot support yet.
- There is problem at XHCS or VTSU.
Response
Try to generate the DSS in a different way.
EDT0651
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0651 CCS '(&00)' CANNOT BE SET. STANDARD WILL BE USED
Meaning
At EDT initialisation, the character set (&00) shall be made the actual
character set. As this is not possible with the current operation mode,
the 7 bit standard EDF03IRV is used instead.
EDT0900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0900 EDITED FILE(S) NOT SAVED!
Meaning
A @HALT (or another) statement has been entered in order to terminate EDT,
but some data have not yet been saved.
EDT will output a list of work files whose data have not yet been saved.
EDT0901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0901 NO MATCH IN RANGE
Meaning
No match exists for the search string in the specified range when
processing an @ON statement.
Error switch: EDT.
If this error occurs while an EDT procedure (@DO or @INPUT) is
being processed, and logging by means of the PRINT operand has not been
activated, this message is not displayed and the EDT error switch
is not set.
EDT0902
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0902 FILE (&00) VERSION (&01)
Meaning
Possible reasons:
- The file (&00) has been specified in a write access statement with the
version number '*' or the actual version number:
The new actual version number after writing is (&01).
- The file (&00) has been specified in a read access statement with the
version number '*' or a wrong version number:
The correct version number is (&01).
EDT0903
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0903 FILE '(&00)' IS IN THE CATALOG, FCBTYPE = (&01)
Meaning
The file (&00) ist already in the catalog, its access method is (&01).
EDT0904
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0904 TERMINATE EDT? REPLY (Y=YES; N=NO)
Meaning
Inquiry whether EDT is to be terminated.
Response
Y: EDT will be terminated
N: EDT will not be terminated.
EDT0905
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0905 EDITED MEMBER TO BE ADDED? REPLY (Y=YES; N=NO)
Meaning
Before returning control to LMS, EDT inquires whether the edited work file
is to be saved by LMS.
EDT0906
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0906 REPEAT ATTEMPT? REPLY (Y=YES; N=NO)
Meaning
If there is not enough virtual memory space to process the statement
the statement can be repeated after appropriate measures have been taken.
Response
Y: The attempt will be repeated.
N: The statement will be aborted.
EDT0907
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0907 NO WORK FILES USED
Meaning
A @DROP ALL statement has been issued by the user
but no work files are currently used.
EDT0909
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0909 AUTOSAVE ABORTED. ERASE SAVING FILES? REPLY (Y=YES; N=NO)
Meaning
The writing of the backup files could not be performed.
Possible reasons are a virtual address space shortage or an unexpected
DMS error. The automatic saving is switched off.
Response
Y: existing saving files will be erased.
N: existing saving files will not be erased.
EDT0910
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0910 '@RENUMBER': LINES WILL BE LOST
Meaning
A @RENUMBER statement has been entered in order to renumber the lines.
If EDT renumbers in the asked way, the maximum line number (9999.9999)
would be reached and the rest of the file would be deleted.
Response
Get information about the number of lines in the work file by entering
the statement @LIMIT before asking to renumber.
EDT0911
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0911 CONTINUE PROCESSING? REPLY (Y=YES; N=NO)
Meaning
At the processing of a statement an error has been detected.
EDT inquires whether it should continue processing.
Response
Y: Processing of the statement will be continued.
N: The statement will be aborted.
EDT0912
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0912 INTERRUPTION NOT POSSIBLE
Meaning
The K2-key has been pushed during a non-interruptable procedure. It is
not possible to change to system mode at the moment.
EDT0913
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0913 /INFORM-PROG TO BE SIMULATED? REPLY (Y=YES; N=NO)
Meaning
The command /INFORM-PROGRAM cannot be performed in a non-interruptable
procedure. EDT asks if an action should be performed.
Response
Y: EDT treats like /INFORM-PROGRAM has been given.
N: The program will be continued.
EDT0914
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0914 RECORD SIZE > 256. ONLY 256 CHARACTERS WILL BE WRITTEN
Meaning
Only 256 characters are written for each record, the rest of the records
becomes undefined.
EDT0915
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0915 CONVERT TO FILE CCS (&00)? REPLY (Y=YES; N=NO)
Meaning
The work file's Coded Character Set is different from that of the file
to be written to.
Response
Y: convert to file's character set before writing.
N: use work file's character set for writing.
EDT0990
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0990 (&00)
Meaning
(&00): Message from test routine.
EDT0999
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT0999 (&00)
Meaning
(&00): Message from external routine.
EDT1137
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1137 SPECIFIED WORK FILE IGNORED IN CONJUNCTION WITH 'SPLIT'
Meaning
In the @PAR statement a work file has been specified
as the first operand. The actions initiated by the @PAR statement
are to be performed only with regard to the specified work file, but the
effect of the operand SPLIT is global.
EDT1150
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1150 NAME OF PLAM LIBRARY MEMBER TRUNCATED AFTER 64 CHARACTERS
EDT1151
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1151 VERSION OF PLAM LIBRARY MEMBER TRUNCATED AFTER 24 CHARACTERS
EDT1174
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1174 FILE ATTRIBUTES IGNORED
Meaning
By means of the @WRITE statement (format 2) an internal work file is
written back to the associated external BS2000 file. File attributes
cannot be defined by means of the @WRITE statement, as they have already
been defined for the external file.
The specified file attributes are ignored.
EDT1180
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1180 CODE ATTRIBUTE IGNORED
Meaning
By means of the XWRITE statement the actual work file is written back to
the UFS file opened before by means of XOPEN. The CODE attribute was
ignored, as there is already one defined for that file.
By asking to write the file with MODE=UPDATE that attribute cannot be
changed.
Error switch: not set.
Response
A change of the code can be performed in the following way:
Write back the work file with MODE=REPLACE und requested CODE-Operand
and then close the file by issuing @CLOSE NOWRITE.
EDT1181
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1181 CODE OPERAND IGNORED
Meaning
A POSIX file, a not existing DMS file or a not existing library element
shall be written using @WRITE CODE=*FILE.
For POSIX files the code set defined with @PAR CODE is used, for other
files the code set of actual work file.
EDT1190
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1190 WORK FILE (&00) IS EMPTY. COPY OPERATION NOT PERFORMED
EDT1226
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1226 SPECIFIED TYPE IGNORED: '(&00)' IS ASSUMED
Meaning
The FCB type specified in the @OPEN or @WRITE statement does
not match the catalog entry. The specified type is ignored and the
type (&00) is taken over from the catalog.
EDT1227
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1227 CCS ATTRIBUTE CANNOT BE SET
Meaning
The file has been created or updated, but the CCS attribute cannot be set,
as the access to file catalog or library catalog returned an error.
Error switch: EDT, DMS.
EDT1228
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1228 KEY OPERAND IGNORED
Meaning
The KEY operand specified in the @COPY, @OPEN or @WRITE statement is
ignored, as the file is not of type ISAM.
EDT1243
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1243 FILE '(&00)' TO BE COPIED IS EMPTY
Meaning
The DMS file to be copied into the actual work file is empty.
Error switch: EDT.
EDT1244
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1244 FILE '(&00)' EMPTY
EDT1245
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1245 JOB VARIABLE IS EMPTY
Meaning
An attempt has been made to get the value of a job variable by a
@GETJV statement, but the entire job variable is empty.
Error switch: EDT.
EDT1246
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1246 UFS FILE '(&00)' TO BE COPIED IS EMPTY
Meaning
The POSIX file to be copied into the actual work file is empty.
Error switch: EDT.
EDT1247
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1247 MEMBER '(&00)' IN LIBRARY '(&01)' TO BE COPIED IS EMPTY
Meaning
The library element to be copied into the actual work file is empty.
Error switch: EDT.
EDT1248
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1248 EMPHASIS INCOMPLETE IN SOME LINES
Meaning
When the lines containing the search string are displayed on the screen
after an @ON statement, not all matches are emphasized, as the insertion
of screen control characters makes one or more lines too long.
Error switch: EDT.
EDT1253
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1253 (SOME) RECORD(S) TRUNCATED
Meaning
Records that are too long are truncated when being read into the internal
work file (in Unicode Mode after 32768, otherwise after 256 characters).
Error switch: EDT.
EDT1254
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1254 NO MARKS SET FOR FILE TO BE PROCESSED IN REAL MODE
Meaning
No marks can be set for files processed in real mode (statement @OPEN).
Error switch: EDT.
EDT1901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1901 ISAM FILE. '@GET' STATEMENT PROCESSED
Meaning
A @READ statement has been entered for an ISAM file. EDT automatically
processes a @GET statement.
Error switch: EDT.
EDT1902
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1902 SAM FILE. '@READ' STATEMENT PROCESSED
Meaning
A @GET statement has been entered for a SAM file. EDT automatically
processes a @READ statement.
Error switch: EDT.
EDT1903
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1903 INPUT TRUNCATED
Meaning
In Unicode mode, a line exceeds the maximum length (32768 characters)
during tabulator expansion. The line will be truncated.
In compatibility mode, when reading data in line mode or
the element of a list variable, more than 256 characters are read.
The input will be truncated.
Error switch: EDT.
EDT1904
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1904 SOME LINES > 256
Meaning
Some lines read by means of a @GET or @READ statement are longer than 256
bytes. The lines concerned are truncated after 256 characters.
Error switch: EDT.
EDT1905
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1905 INPUT TOO LONG. CORRECT INPUT
Meaning
The following conditions cause a termination error when reading:
- input for a @CREATE...READ statement >256 bytes, or
- input >284 subsequent to a @PRINT statement and input request *+-0, or
- input of a statement with indirect operands and the sum of characters of
operation string and the length of the string variable exceeds 256.
Error switch: not set.
EDT1906
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1906 TOO MANY NAMES. LIST INCOMPLETE
Meaning
The 15 pages provided for FSTAT are not sufficient to accommodate all
the file names, or
the 8 pages provided for STAJV are not sufficient to accommodate all
the names of job variables, or
the 8 pages provided for CMD are not sufficient to accommodate all
the lines to be output to the buffer.
The list (of names) is not complete.
Error switch: EDT.
EDT1907
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1907 MODULE CANNOT BE UNLOADED
Meaning
The module specified in the @RUN statement or in the @UNLOAD
statement could not be unloaded. Either an incorrect module name has
been specified or the module is not loaded.
Error switch: EDT.
EDT1936
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1936 MODIFIED LINE > 256 CHARACTERS
Meaning
An edited line became too long as a result of modification. This error
can be caused by an @ON, @PREFIX, @SUFFIX, @COL or @CREATE statement.
Moreover, an extended line containing formal operands may have become
too long in a procedure. The line is truncated after 256 characters.
In a @SETJV statement, when the extended string for the value of a
job variable became too long, only the first 256 characters are taken
over as the value.
Error switch: EDT.
EDT1937
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1937 MODIFIED LINE > 32768 CHARACTERS
Meaning
A work file line would become too long as a result of modification
with an @ON statement. The line will remain unchanged.
Error switch: EDT.
EDT1938
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT1938 MODIFIED LINE > 32768 CHARACTERS
Meaning
A @DO procedure line would become too long as a result of parameter
replacement. The line will be truncated.
Error switch: EDT.
EDT2169
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2169 WORK FILE (&00) IS EMPTY. WRITE OPERATION NOT PERFORMED
Meaning
The statement @WRITE (format 2) or @XWRITE could not be performed, for the
work file (&00) is empty.
Error switch: not set.
EDT2266
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2266 WORK FILE IS EMPTY: MEMBER '(&00)' CLOSED UNCHANGED
Meaning
As the work file specified in the @CLOSE or @WRITE statement (format 2) is
empty, the member (&00) has been closed but not saved.
EDT2267
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2267 LINE TRUNCATED AFTER (&00) CHARACTERS
Meaning
As the input record in F mode is longer than the LIMIT specified in the
@PAR statement, it is truncated.
(&00): maximum permissible record length.
EDT2301
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2301 COPY BUFFER OVERFLOW
Meaning
The copy buffer cannot hold more than 256 line numbers.
EDT2400
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2400 LINE TRUNCATED AFTER 32768 CHARACTERS
Meaning
A @CREATE or @SETJV statement, a J statement code or a data input with
tabulator expansion results in a work file line with more than
32768 characters. The line will be truncated after 32768 charcters.
Error switch: EDT.
EDT2401
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2401 LINE TRUNCATED AFTER 2048 BYTES
Meaning
The prompt string to be displayed for @CREATE statement (format 3 or 4)
is too long. It is truncated after 2048 bytes.
Error switch: EDT.
EDT2402
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2402 OUTPUT TRUNCATED AFTER (&00) CHARACTERS
Meaning
The prompt string to be output for statement @CREATE (format 3 or 4)
is too long. It is truncated after (&00) characters.
Error switch: EDT.
Response
Shorten string.
EDT2403
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2403 OUTPUT TRUNCATED AFTER 4096 BYTES
Meaning
The string to be assigned to a S variable is too long.
It is truncated after 4096 bytes.
Error switch: EDT.
EDT2404
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2404 NOT ENOUGH LINES FOR HEX MODE
Meaning
On a split screen there are less lines in the work window than would be
needed for diplaying a line in hexadecimal mode.
Error switch: EDT.
Response
Enlarge the work window (@PAR SPLIT).
EDT2405
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2405 LINE TRUNCATED DURING AUTOSAVE
Meaning
Whe a work file is saved using @AUTOSAVE, a line is longer than the
maximum record line of the saving file. The line will be truncated.
Error switch: EDT.
EDT2406
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2406 MAXIMUM LINE NUMBER
Meaning
The given statement was processed correctly, but the new actual line
can not be the last line of the work file incremented with the actual
increment, because the maximum line number (9999.9999) would be
exceeded. The new actual line will become the last line of the work file.
Error switch: EDT.
EDT2407
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2407 OUTPUT OF SYSTEM COMMAND TRUNCATED
Meaning
The output of the operating system command issued via @SYSTEM is too
long, it will be truncated.
Error switch: EDT.
EDT2408
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2408 LOGGING TERMINATED
Meaning
The output media specified in @LOG cannot be written to. Logging will be
switched off.
Error switch: EDT.
EDT2409
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2409 CPU TIME SPECIFIED AT EDT START EXCEEDED
Meaning
The CPU time specified at EDT start has been exceeded. EDT will be
continued.
Error switch: EDT.
EDT2900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2900 A KEY WAS ZERO AND HAS BEEN SET TO 0.0001
Meaning
A key with the value 0 has been detected during processing of a
@GET or @READ statement (with the KEY function). The line number in the
work file is set to 0.0001 for this line.
Error switch: EDT.
EDT2901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2901 CHECK LINE LENGTH
Meaning
The line length check is active (@CHECK or @TABS) and the line read or
created by tabulator expansion is longer than specified in the CHECK
statement or operand. The line will be created as specified.
Error switch: EDT.
EDT2902
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2902 CHECK TAB COLUMNS
Meaning
The CHECK function was specified in the @TABS statement. CHECK detected
that the line which has just been entered with tabs causes reverse
positioning, i.e. text was overwritten.
Error switch: EDT.
Response
Check the line, as it probably contains an error.
EDT2903
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2903 FILE IS EMPTY
Meaning
Possible error cause:
- An empty file on disk is accessed by means of a @READ, @GET, @INPUT
or @ELIM statement.
- A @SETLIST statement has been specified in an empty work file.
- A work file specified in a @COMPARE statement is empty.
Error switch: EDT.
EDT2904
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT2904 MAXIMUM LINE NUMBER WHEN PROCESSING '@RENUMBER'. SOME LINES ARE LOST
Meaning
The maximum permissible line number (9999.9999) has been reached during
processing of a @RENUMBER statement. EDT does not permit duplicate
line numbers in a work file. The rest of the file has been erased.
Error switch: EDT.
EDT3002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3002 OPERAND ERROR
Meaning
The statement contains a syntax error.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3003 '(' MISSING
Meaning
Error switch: EDT.
Response
Insert the missing bracket and re-enter the statement.
EDT3004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3004 ')' MISSING
Meaning
Error switch: EDT.
Response
Insert the missing bracket and re-enter the statement.
EDT3040
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3040 NAME INVALID OR MISSING
Meaning
The string contains more than 8 characters or does not fullfill the syntax
of the operand or is missing.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3050 INVALID SYSLST-NUMMER
Meaning
The SYSLST number issued in the statement @LOG is invalid.
Only values between 1 and 99 are valid.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3065 NUMBER OF LINES OR 'OFF' OR 'O' EXPECTED
Meaning
The operand SPLIT of the @PAR statement must contain
- either the number of lines of the second window and the name of the
work file to be displayed in the second window, or
- OFF or O in order to set the screen back to one window.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3066
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3066 WRONG COLUMN NUMBER
Meaning
A wrong column number has been specified in the @SETF statement.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3068
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3068 POSITION INVALID OR MISSING
Meaning
The specification of POSITION in the @SETF statement is mandatory.
The statement could not be processed.
Response
Correct and re-enter the statement.
EDT3069
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3069 STRING TO BE INSERTED IS MISSING
Meaning
The statement has not been processed because the string to be inserted is
missing.
Response
Correct and re-enter the statement.
EDT3070
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3070 'EDIT-LONG' EXPECTED
Meaning
The operand specified in the @PAR statement is wrong.
Correct form of the operand: @PAR EDIT-LONG = ... .
Response
Correct and re-enter the statement.
EDT3071
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3071 'ON', 'OFF' OR 'O' EXPECTED
Meaning
The operand specification in the @PAR statement contains an error,
ON, OFF or O is missing after an equals sign.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3072
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3072 NUMBER INVALID OR MISSING
Meaning
The format of the specified numeric value is incorrect, or the value has
not been specified at all.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3073
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3073 TARGET POSITION IS INVALID OR MISSING
Meaning
The statement has not been processed because the target position
in the COPY statement is missing or invalid.
Response
Correct and re-enter the statement.
EDT3074
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3074 'KEEP' OPERAND EXPECTED IN 'COPY' STATEMENT
Meaning
The COPY statement has not been processed because the operand KEEP is
missing.
Response
Correct and re-enter the statement.
EDT3075
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3075 RECORD RANGE CANNOT BE SPECIFIED
Meaning
The statement has not been processed because no record range can be
specified in the statement.
Response
Correct and re-enter the statement.
EDT3076
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3076 'COPY KEEP' PERMISSIBLE ONLY FOR ISAM FILES
Meaning
The KEEP operand in the COPY statement can only be specified for ISAM
files. The statement has not been processed.
EDT3077
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3077 OPERAND 'STRUCTURE=' INCORRECT
Meaning
In the @PAR statement the symbol for STRUCTURE is either missing
or not given in single quotes.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3078
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3078 SPECIFIED NUMBER INVALID (VALID RANGE: 1..256)
Meaning
The specified value for LIMIT in the @PAR statement or the factor n in
the repetition statement # is not within the permissible range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3079
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3079 COLUMN '0' NOT PERMISSIBLE
Meaning
The statement has not been processed because '0' cannot be specified as a
column number.
Response
Correct and re-enter the statement.
EDT3080
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3080 SPECIFIED COLUMN INVALID, OR ':' MISSING IN COLUMN RANGE
Meaning
The character ':' is missing in the specified column range, or the
specified range is invalid.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3081
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3081 LINE NUMBER > 9999.9999
Meaning
The specified line number is too high. The maximum permissible line number
is 9999.9999.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3082
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3082 LINE NUMBER 0 INVALID
Meaning
Line number 0 or increment 0 cannot be specified.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3085
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3085 '(&00)' NOT POSSIBLE FOR PLAM ELEMENT TYPE '(&01)'
Meaning
Library elements of the type R, C, H, L, U, F or corresponding free type
cannot be used with the statements @COPY, @OPEN, @WRITE or @INPUT.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3086
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3086 INVALID PLAM TYPE
Meaning
The PLAM type specified in the statement is invalid.
Valid PLAM types: S, M, J, P, D, X, R, C, H, L, U, F and equal free
typenames. A free typename must not start with $ or SYS and consists of
2 to 8 characters.
EDT3087
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3087 INVALID JOB VARIABLE NAME
Meaning
The string used to specify a job variable name is incompatible with the
syntax of a job variable name, or
the job variable name in a @SETJV or @GETJV statement was not
fully qualified, or
it was an invalid request by an @ERAJV statement.
Error switch: EDT.
Response
Correct and re-enter statement.
EDT3088
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3088 INVALID NAME OF S-VARIABLE
Meaning
The string used to specify a SDF-P variable in a @GETVAR or @SETVAR
statement is incompatible with the syntax of a SDF-P variable.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3089
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3089 INVALID NAME OF UFS FILE
Meaning
A string used for specifying the name of a UFS file did not follow the
syntax of a file name in the POSIX file system or one of the directories
issued does not exist.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3093
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3093 INVALID STRUCTURED NAME OR STRUCTURED NAME MISSING
Meaning
The string contains more than 30 characters or does not fulfil
the syntax of the operand or is missing.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3100 WORK FILE IS EMPTY. STATEMENT NOT PROCESSED
Meaning
The statement refers to a line number which cannot be found as the
work file is empty.
EDT3101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3101 INVALID STATEMENT
Meaning
No valid EDT statement has been recognized.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3106 SPECIFIED WORK FILE INVALID (VALID RANGE: 0..9)
Response
Correct and re-enter the statement.
EDT3110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3110 EQUAL SIGN EXPECTED. STATEMENT NOT PROCESSED
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3111 'TYPE' OPERAND IS MISSING OR INVALID
Meaning
The TYPE operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3112 'TYPE' OPERAND ALREADY DEFINED
Meaning
An attempt was made to specify the TYPE operand a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3116
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3116 'CODE' OPERAND MISSING OR INVALID
Meaning
The CODE operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3117
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3117 'MODE' OPERAND MISSING OR INVALID
Meaning
The MODE operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3118
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3118 'MODE' OPERAND ALREADY DEFINED
Meaning
An attempt was made to specify the MODE operand a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3119
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3119 WORK FILE ALREADY DEFINED
Meaning
In the OPEN or WRITE statement, an attempt was made to define the
work file a second time.
Response
Correct and re-enter the statement.
EDT3120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3120 FILE NAME ALREADY DEFINED
Meaning
In the OPEN or WRITE statement, an attempt was made to define the file
name a second time.
Response
Correct and re-enter the statement.
EDT3121
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3121 LIBRARY NAME MISSING OR FORMAT OF SPECIFIED LIBRARY NAME INVALID
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3122
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3122 FILE NAME MISSING OR FORMAT OF SPECIFIED FILE NAME INVALID
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3123
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3123 NO VALID NAME OF PLAM MEMBER
Meaning
When processing a PLAM library, no valid member name has been specified.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3124
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3124 VERSION NUMBER MISSING OR INVALID
Meaning
The version number of a PLAM library member has not been specified or the
specified version number contains invalid characters.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3125
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3125 'OPEN REAL' PERMISSIBLE ONLY FOR ISAM FILES
Meaning
It is not possible to process the specified file in OPEN REAL mode because
that mode is permitted only for ISAM files.
Response
Process the specified file in virtual memory.
EDT3126
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3126 FILE ATTRIBUTES CANNOT BE SPECIFIED
Meaning
It is not possible to specify file attributes in the relevant
statement, therefore the statement has not been processed.
EDT3127
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3127 NAME OF WORK FILE IS INVALID OR MISSING
Meaning
No name has been specified for the work file, or the specified name
is invalid.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3128
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3128 PLAM LIBRARY NAME INVALID OR MISSING
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3129
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3129 NO FILE ATTRIBUTES CAN BE DEFINED FOR PLAM LIBRARIES
Meaning
When processing a PLAM library an attempt was made to define the file
attribute FCBTYPE=ISAM or SAM. The statement has not been processed.
Response
Correct and re-enter the statement.
EDT3132
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3132 PLAM TYPE IS MISSING OR INVALID
Meaning
The TYPE of the PLAM member has not been specified in the
statement, or the specification is invalid.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3133
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3133 PLAM VERSION SPECIFICATION INVALID
Meaning
Error switch: EDT.
Response
Correct the version specification and re-enter the statement.
EDT3134
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3134 '*STD' EXPECTED
Meaning
When processing a PLAM library, '*' has been specified for the type
or the version.
Response
Replace '*' by '*STD' and re-enter the statement.
EDT3135
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3135 MODUL NAME MISSING
Meaning
The @UNLOAD statement has not been processed for the name of the modul has
not been specified.
Response
Correct and re-enter the statement.
EDT3136
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3136 'INCREMENT=0' NOT PERMISSIBLE
Meaning
The specification INCREMENT=0 in the @PAR statement is not permitted.
The statement has not been processed.
Response
Correct and re-enter the statement.
EDT3138
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3138 ONLY ONE CHARACTER POSSIBLE AS SYMBOL
Meaning
More than one character has been specified as a symbol.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3170
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3170 SYNTAX ERROR IN LINE NUMBER
Meaning
The operand which is supposed to be a line number is syntactically
incorrect.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3172
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3172 MODULE NAME TOO LONG
Meaning
The modul name specified in an @UNLOAD statement was longer than 8
characters (compatible format) or longer than 32 characters (new format).
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3173
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3173 NUMBER OF WORK FILE FOR COMPARE OPERATION MISSING OR INVALID
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3174
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3174 NAME TOO LONG
Meaning
A string used for specifying a file or jobvariable name consists of more
characters than allowed by the system
(fully qualified: 54, with wildcards: 80).
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3175
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3175 SYNTAX ERROR IN SPECIFIED RANGE
Meaning
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3176
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3176 STATEMENT SYMBOL INVALID OR TOO LONG
Meaning
The statement symbol in the @USE statement must be specified within
single quotes and must consist of exactly one character.
Response
Correct and re-enter the statement.
EDT3177
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3177 ENTRY NAME TOO LONG
Meaning
The entry name is longer than the permissible maximum of 8 characters
(compatible format) or 32 characters (new format).
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3178
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3178 LIBRARY NAME TOO LONG
Meaning
The library name is longer than the permissible maximum of 54 characters.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3179
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3179 ENTRY NAME MISSING OR INVALID
Meaning
The specified string does not fulfill the syntactical requirements for
entry names, or the entry name is missing.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3180
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3180 JOKER SYMBOL EQUALS QUOTE
Meaning
Possible reasons:
- The value specified in the @SYMBOLS statement for the ASTERISK or
SLASH chartacter is invalid as it is the same as one of the
QUOTE characters.
- An @ON statement with keyword PATTERN could not be processed, as
QUOTE1 or QUOTE2 is the same as the ASTERISK or SLASH character.
Error switch: EDT.
Response
Choose different symbols for ASTERISK, SLASH, QUOTE1 and QUOTE2.
EDT3181
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3181 BOTH JOKER SYMBOLS ARE THE SAME
Meaning
An attempt was made to redefine one of the joker symbols by means
of a @SYMBOLS statement. The statement was not processed
because different symbols must be defined for ASTERISK and SLASH.
Error switch: EDT.
Response
Choose different symbols for ASTERISK and SLASH, and
re-enter the @SYMBOLS statement.
EDT3182
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3182 CCSN TOO LONG
Meaning
A string used for specifying a coded character set name consists of more
than 8 characters.
Error switch: EDT.
Response
Correct and re-enter statement.
EDT3183
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3183 LINE NUMBER EXPECTED
Meaning
A valid line number has to be specified after the keyword TO in the
statement @SHOW, @FSTAT, @STATUS, @SYSTEM or @STAJV.
Error switch: EDT.
Response
Correct and re-enter statement.
EDT3190
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3190 SPECIFIED NUMBER INVALID (VALID RANGE: 1..32768)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3191
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3191 OPERAND TOO LONG
Meaning
The specified operand is too long.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3192
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3192 ILLEGAL CHARACTER IN OPERAND
Meaning
The specified operand contains illegal characters.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3193
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3193 SPECIFIED WORK FILE INVALID (VALID RANGE: 0..22)
Meaning
The specified work file number is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3194
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3194 SPECIFIED NUMBER INVALID (VALID RANGE: 1..9)
Meaning
The specified record mark is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3195
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3195 SPECIFIED UNICODE VALUE INVALID
Meaning
The specification of a separator character, a structure symbol, a
surrogate character or a filler character as a Unicode value does not
correspond to a valid character.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3196
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3196 SPECIFIED HEX OR BINARY VALUE INVALID
Meaning
The specified haxadecimal or binary value does not correspond to a valid
character.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3197
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3197 SPECIFIED NUMBER INVALID (VALID RANGE: 0..32768)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3198
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3198 SPECIFIED NUMBER INVALID (VALID RANGE: 0..99999999)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3199
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3199 SPECIFIED NUMBER INVALID (VALID RANGE: 0..31)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3200 SPECIFIED NUMBER INVALID (VALID RANGE: 1..8)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3201 SPECIFIED NUMBER INVALID (VALID RANGE: 0..65535)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3202 SPECIFIED NUMBER INVALID (VALID RANGE: 1..65535)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3203 'KEY' OPERAND ALREADY DEFINED
Meaning
The KEY operand has been specified a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3204 'CODE' OPERAND ALREADY DEFINED
Meaning
The CODE operand has been specified a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3205 'KEY' OPERAND IS MISSING OR INVALID
Meaning
The KEY operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3206
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3206 SPECIFIED NUMBER INVALID (VALID RANGE: 0..255)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3207
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3207 SPECIFIED NUMBER INVALID (VALID RANGE: 0..256)
Meaning
The specified value is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3209
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3209 SPECIFIED WORK FILE INVALID (VALID RANGE: 1..22)
Meaning
The specified work file number is outside the valid range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3210
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3210 'LENGTH' OPERAND IS MISSING OR INVALID
Meaning
The LENGTH operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3211
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3211 'LENGTH' OPERAND ALREADY DEFINED
Meaning
The LENGTH operand has been specified a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3212
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3212 'MARK' OPERAND IS MISSING OR INVALID
Meaning
The MARK operand has been specified without a valid operand value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3213
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3213 'MARK' OPERAND ALREADY DEFINED
Meaning
The MARK operand has been specified a second time.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3214
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3214 LINK NAME IS MISSING OR INVALID
Meaning
The specified link name has no valid value.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3215
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3215 MISSING CLOSING QUOTE IN STRING
Meaning
A string was specified without a closing quote symbol.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3216
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3216 INVALID RANGE (LOWER > UPPER)
Meaning
The first switch number in the @SETSW statement is higher than the second
one.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3217
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3217 TOO MANY DIGITS IN NUMBER
Meaning
The decimal integer used for numbering lines in the @SEQUENCE statement
may only have up to 8 digits.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3218
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3218 'TO' OPERAND EXPECTED
Meaning
In the @COPY or @MOVE statement a TO operand is missing.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3219
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3219 'TYPE' OPERAND NOT ALLOWED
Meaning
The TYPE operand is only allowed for DMS files.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3220
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3220 'KEY' OPERAND NOT ALLOWED
Meaning
The KEY operand is only allowed for DMS files.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3221
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3221 'CODE' OPERAND NOT ALLOWED
Meaning
The CODE operand is only allowed for POSIX files.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3222
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3222 INCREMENT MISSING OR INVALID
Meaning
No increment is specified or the increment value is invalid.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3223
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3223 UFS FILE NAME MISSING OR INVALID
Meaning
The specification of a UFS file name is missing, or it does not follow the
syntax of a file name in the POSIX file system.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3224
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3224 SPECIFIED NUMBER INVALID (VALID RANGE: 1..2048)
Meaning
The factor n in the repetition statement # is not within the permissible
range.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3901 ILLEGAL BINARY CONSTANT
Meaning
A string with a 'B' in front of the first single quote or the text input
after @INPUT BINARY is in error.
Only the digits '0' and '1' are valid characters, and the string must
not be empty.
Error switch: EDT.
Response
Correct and re-enter the statement or text.
EDT3902
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3902 ILLEGAL HEX CONSTANT
Meaning
A string with an 'X' in front of the first single quote or the text input
after @INPUT HEX is in error.
Only the digits 0 to 9 and the letters A to F are valid characters
and the string must not be empty.
Error switch: EDT.
Response
Correct and re-enter the statement or text.
EDT3903
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3903 INVALID RANGE
Meaning
Either the line numbers in the specified range are invalid or
a dash (-) is not followed by a second line number.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3904
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3904 INVALID SUBSTRING
Meaning
A @SET statement contains an invalid substring. All substrings must
comply with the syntax ln or +/-int.
Error switch: EDT.
EDT3905
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3905 INVALID VARIABLE
Meaning
A line number, string or integer variable has been specified incorrectly.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3906
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3906 LINE NUMBER INVALID
Meaning
Possible error cause:
- The integer variable in the statement @SET (format 3) does not contain
a valid line number.
- The target line number variable in the statement @SET (format 4 or 5)
does not contain a valid line number.
- The destination of the output in the statement @GETJV is not a valid
line number.
- The line number is too high for the specified KEYLEN of a file opened
in real mode by means of an @OPEN statement.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3907
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3907 EMPTY STRING NOT PERMISSIBLE
Meaning
A string specified directly or indirectly (i.g. by means of a EDT string
variable or a SDF-P variable) is empty. But that is not permissible for
this statement.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3908
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3908 STRING MISSING OR INVALID
Meaning
A string is missing in a statement or is invalid.
In compatibility mode, the error cause also may be that no file name is
specified in an I/O statement and neither a local nor a global @FILE entry
is defined.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3909
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3909 PARAMETER ERROR
Meaning
Some of the most common error causes are:
- the line number or increment is invalid
- one or more operands are missing in the statement
- invalid ON/OFF
- the number of a procedure file is '0'
- the value in @SETSW statement is greater than 31.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3910
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3910 DUPLICATE FORMAL OPERAND
Meaning
A formal operand has been specified at least twice in the @PARAMS
statement.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3911
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3911 DUPLICATE KEYWORD
Meaning
A keyword has been specified at least twice in a @DO statement.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3922
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3922 INVALID COLUMN (RANGE)
Meaning
The value specified for a column is invalid, or the specified column
(range) is syntactically incorrect.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3951
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3951 PROCEDURE NUMBER > 22
Meaning
Error switch: EDT.
EDT3952
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3952 INVALID SYMBOL
Meaning
For the symbol definition a special character has to be choosen.
Error switch: EDT.
Response
Choose a valid special character as symbol.
EDT3991
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3991 SYNTAX ERROR IN EXTERNAL STATEMENT
Meaning
The external routine reports a syntax error in the specified statement
without any additional information.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT3999
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT3999 (&00)
Meaning
The external routine reports a syntax error in the specified statement
with the message (&00).
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT4200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4200 MACRO '(&00)': DMS ERROR CODE: '(&01)'
Meaning
All DMS errors are output in this form:
(&00): DMS macro (OPEN, etc.) during whose processing the error occurred.
(&01): hexadecimal error code.
For more detailed information about the DMS error enter the
ISP command /HELP DMS(&01) or the SDF command /HELP-MESS DMS(&01)
in system mode, or see the BS2000 manual "System Messages" or one
of the BS2000 DMS manuals.
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4201 MACRO '(&00)': JVS ERROR CODE: '(&01)'
Meaning
All JVS errors are output in this form:
(&00): JVS macro (STAJV, etc.) during whose processing the error occurred
(&01): Hexadecimal error code.
For more detailed information about the JVS error enter the
ISP command /HELP JVS(&01) or the SDF command /HELP-MESS JVS(&01)
in system mode, or see the BS2000 manual "System Messages" or
the BS2000 JVS manual.
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4202 MACRO '(&00)': SDF-P ERROR CODE: '(&01)'
Meaning
All SDF-P errors are output in this form:
(&00): SDF-P macro (PUTVAR, etc.) during whose processing the error
occured.
(&01): Hexadecimal error code.
For more detailed information about the SDF-P error enter the
ISP command /HELP SDP(&01) or the SDF command /HELP-MESS SDP(&01)
in system mode, or see the BS2000 manual "System Messages" or
the BS2000 SDF-P manual.
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4203 MACRO '(&00)': XHCS ERROR CODE: '(&01)'
Meaning
All XHCS errors are output in this form:
(&00): XHCS macro (NLSCODE, etc.) during whose processing the error
occured
(&01): Hexadecimal error code.
For more detailed information about the XHCS error
see the BS2000 manual "XHCS".
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4204 MACRO '(&00)': TIAM ERROR CODE: '(&01)'
Meaning
All TIAM errors are output in this form:
(&00): TIAM-Macro (WRLST, etc.) during whose processing the error occured
(&01): Hexadecimal error code.
For more detailed information about the TIAM error see the
BS2000 manual "TIAM" or the BS2000 manual "Macro Calls".
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4205 MACRO '(&00)': BLS ERROR CODE: '(&01)'
Meaning
All errors of the Binder Loader System are output in this form:
(&00): BLS macro (BIND) during whose processing the error occured
(&01): Hexadecimal error code.
For more detailed information about the BLS error see the BS2000
manual "Binder Loader System" or the BS2000 manual "Macro cals".
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4206
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4206 POSIX-CALL '(&00)': ERROR '(&01)'
Meaning
All errors reported by POSIX-calls are output in this form:
(&00): Function which returns an error
(&01): error code returned in C-variable ERRNO.
For more detailed information about the error see the BS2000 manual
"C library functions" or the BS2000 manual "POSIX".
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4207
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4207 MACRO '(&00)': SDF ERROR CODE: '(&01)'
Meaning
All errors of SDF-macros are output in this form:
(&00): SDF-Macro (CMDSTA, etc.) during whose processing the error occured
(&01): Hexadecimal error code.
For more detailed information about the SDF error see the BS2000
manual "SDF-A".
Processing of an @INPUT file is aborted due to this error.
Error switch: DMS.
EDT4208
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4208 MACRO '(&00)' RETURNS ERROR CODE '(&01)'
Meaning
When executing the macro (&00) an error with error code (&01) occurred.
The error code is issued in form of a message number if available.
Otherwise the complete macro returncode (subcode2, subcode1, maincode) is
issued. If there are two return codes available, both are issued,
separated by a /.
For more detailed information about the error see the appropriate BS2000
manual.
Error switch: EDT, DMS.
EDT4209
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4209 FUNCTION '(&00)' RETURNS ERROR '(&01)'
Meaning
When executing the function (&00) an (&01) error was returned in
C-variable ERRNO.
For more detailed information about the error see the appropriate BS2000
manual.
Error switch: EDT, DMS.
EDT4300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4300 ERROR AT SYSTEM COMMAND: ERROR CODE '(&00)'
Meaning
The command specified in the @SYSTEM statement is rejected by the
CMD macro.
For more detailed information about the error cause enter the command
/HELP-MESS (&00) in system mode, or see the BS2000 manual
"System Messages".
Error switch: DMS.
EDT4310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4310 SDF: SYNTAX ERROR IN LINE (&00)
Meaning
While checking the syntax of data lines with @SDFTEST a syntax error has
been detected in line (&00) and could not be corrected in a SDF error
dialog.
Error switch: EDT.
Response
Enable SDF guided error dialog, e.g. by
@SYSTEM '/MODIFY-SDF-OPTIONS GUIDANCE=MIN'.
EDT4312
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4312 CHECK TAB COLUMNS IN LINE (&00)
Meaning
The CHECK function was specified for the @TABS statement. CHECK detected
that in line (&00) tabs caused reverse positioning, i.e. text was
overwritten.
Processing of @TABS RANGE has been aborted.
Error switch: EDT.
EDT4313
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4313 LINE (&00) > 256 CHARACTERS
Meaning
The length of line (&00) would exceed 256 characters.
Processing of @TABS RANGE has been aborted.
Error switch: EDT.
EDT4314
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4314 LINE (&00) > 32768 CHARACTERS
Meaning
The length of line (&00) would exceed 32768 characters.
Processing of @TABS RANGE has been aborted.
Error switch: EDT.
EDT4315
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4315 RANGE SYMBOL MUST NOT BE USED AS STATEMENT SYMBOL
Meaning
For the definition of a new statement symbol with statement @:
the actual range symbol (see @RANGE) was used.
The statement is not processed.
Error switch: EDT.
EDT4900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4900 /SET-FILE-LINK IS IN EFFECT
Meaning
A /SET-FILE-LINK command with a link name used by EDT (EDTSAM, EDTISAM, or
EDTMAIN) is active. However, the file name specified in the EDT statement
(@GET, @READ, @INPUT, @OPEN, @ELIM, @WRITE or @SAVE) does not match
the one specified in the /SET-FILE-LINK command.
The statement is not processed.
Error switch: EDT.
EDT4901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4901 ONE INPUT FILE IS ALREADY ACTIVE
Meaning
The @INPUT statement is not permissible inside an @INPUT procedure.
Error switch: EDT.
EDT4903
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4903 BOTH OPERANDS IN '@QUOTE' STATEMENT ARE THE SAME
Meaning
If both operands are specified in the @QUOTE statement, they
must be different.
Error switch: EDT.
EDT4904
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4904 BTAM FILES NOT SUPPORTED
Meaning
An attempt was made to process a BTAM file by means of a @GET, @SAVE
@READ, @WRITE, @INPUT, @OPEN or @ELIM statement. However, EDT does
not support BTAM files.
Error switch: EDT.
EDT4906
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4906 '(&00)' NOT POSSIBLE FOR CURRENT WORK FILE
Meaning
The statement (&00) refers to the current work file and therefore is
impossible to be executed (e.g. @DO, @DROP).
Error switch: EDT.
EDT4907
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4907 '@DROP' NOT POSSIBLE DURING PROCEDURE FILE PROCESSING
Meaning
The @DROP statement is not permissible inside a @DO procedure.
Error switch: EDT.
EDT4908
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4908 INVALID COMMAND
Meaning
The command specified in the @SYSTEM statement either contains an error
or cannot be passed by the CMD macro.
Error switch: DMS.
Response
Correct and re-enter the statement or
branch to system mode by means of @SYSTEM.
EDT4909
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4909 WORK FILE ALREADY ACTIVE
Meaning
In a @PROC statement the number of current work file was specified.
Error switch: EDT.
EDT4910
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4910 S-VARIABLE MUST BE OF TYPE LIST
Meaning
The SDF-P variable specified in a @GETLIST or @SETLIST statement or in
a @LOG statement in compatibility mode is not of type LIST
or has not been declared yet.
Error switch: EDT.
Response
If the variable has not been declared yet, perform the system command
/DECL-VAR NAME=..,MULT-ELEM=LIST before re-entering the statement.
EDT4912
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4912 EAM OPEN ERROR
Meaning
An EAM file cannot be opened during a @LIST statement in conjunction with
the 'I' operand.
Error switch: EDT.
EDT4913
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4913 EAM WRITE ERROR
Meaning
A write error has occurred while writing to an EAM file (@LIST
statement in conjunction with the 'I' operand).
Error switch: EDT.
EDT4916
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4916 FILE '(&00)' NOT IN CATALOG
Meaning
A file name specified in a @FSTAT, @GET, @READ, @INPUT, @ELIM, @SAVE
@WRITE, @COPY, or @UNSAVE statement does not exist in the catalog.
If this error occurs in an @FSTAT statement, the DMS error switch is also
set for reasons of compatibility. Processing of @INPUT files is, however
not aborted.
In new EDT procedures only the EDT error switch should be checked.
Error switch: EDT, DMS (see meaning text).
EDT4918
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4918 FORMAL OPERAND MISSING
Meaning
A formal operand has been expected but not found in a @PARAMS statement.
Error switch: EDT.
EDT4919
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4919 REQM ERROR FOR (&00) BUFFER
Meaning
During processing of a @FSTAT, @STAJV, @LIST I or @SYSTEM
statement using the (&00) macro, the required pages of virtual
address space could not be provided by REQM for the (&00) buffer.
E.g.: for FSTAT >=15 pages, for STAJV 8 pages, for EAM 1 page
for CMD 8 pages.
Error switch: EDT.
EDT4920
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4920 STATEMENT ILLEGAL DURING PROCEDURE FILE PROCESSING
Meaning
The specified statement is not permissible inside a @DO or @INPUT
procedure (e.g. @INPUT, @SETF GLOBAL, ...).
Error switch: EDT.
EDT4921
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4921 STATEMENT ILLEGAL DURING '@INPUT' PROCESSING
Meaning
The @UPDATE statement (format 2), @CODENAME or @GOTO has been read from a
file opened by means of @INPUT.
Error switch: EDT.
EDT4923
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4923 INVALID FILE NAME
Meaning
The file name specified in a @FSTAT, @GET, @READ, @INPUT, @OPEN, @ELIM
@WRITE, @SAVE, @UNSAVE, @COPY or @DELETE statement does not comply with
the conventions governing the definition of the file names.
In compatibility mode, a possible error cause is that the file name
specified in single quotes or in a string variable has a leading blank.
Error switch: EDT, DMS.
EDT4924
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4924 INVALID FORMAL OPERAND
Meaning
A @PARAMS statement contains an invalid formal operand.
Error switch: EDT.
EDT4925
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4925 STATEMENT ONLY PERMITTED IN WORK FILE 0
Meaning
A file can only be opened in real mode in work file 0.
Error switch: EDT.
EDT4926
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4926 INVALID KEY
Meaning
In the @GET '...' N, @READ '...' KEY, or @ELIM '...' statement an attempt
was made to access a record using an invalid key. Processing of the
statement has been aborted.
Processing of the @INPUT files has been aborted in case of DMS errors.
In batch mode or if EDT is reading in data from SYSDTA by means of RDATA
EDT terminates and the following message is displayed:
"EDT8001 EDT TERMINATED ABNORMALLY".
Error switch: EDT, DMS.
EDT4927
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4927 INVALID KEY IN FILE OPENED IN REAL MODE
Meaning
An ISAM file has been opened in real mode (@OPEN) and an attempt has
been made to access a record by means of an invalid key. Processing of
the statement has been aborted, and the file currently being processed
has been closed. Processing of @INPUT files is aborted as
in the case of DMS errors. In batch mode or if EDT is reading
from SYSDTA by means of RDATA, EDT terminates and the following
message is displayed: "EDT8001 EDT TERMINATED ABNORMALLY".
Error switch: EDT, DMS.
EDT4928
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4928 INVALID VALUE
Meaning
Possible error cause:
- In a @COMPARE statement (format 1) the value of int2 is greater than
that of int1.
- The string specified after STRING keyword in a @SET statement (format 3)
cannot be interpreted as a line number.
- A @PARAMS keyword or a @DO operand has an invalid value.
Error switch: EDT.
EDT4929
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4929 ISAM 'RECORD-FORMAT=*FIXED' NOT SUPPORTED
Meaning
An attempt has been made to process a file with fixed record length
using the @OPEN statement and the /SET-FILE-LINK command with
LINK-NAME=EDTMAIN.
Error switch: EDT.
EDT4930
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4930 'KEY-POSITION <> 1' AND 'RECORD-FORMAT=*FIXED' NOT SUPPORTED
Meaning
In a @GET or @SAVE statement an ISAM file has been assigned by means of a
/SET-FILE-LINK ...,LINK-NAME=EDTISAM,ACCESS-METHOD=ISAM(REC-FORM=FIXED...)
command, but the file does not have 'KEY-POSITION=1'.
Error switch: EDT.
EDT4931
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4931 KEY-LENGTH TOO BIG
Meaning
A @GET, @SAVE, @ELIM or @OPEN statement has been issued for a file
with KEY-LENGTH >8.
Error switch: EDT.
EDT4932
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4932 LINE NUMBER NOT FOUND
Meaning
A line number has been specified for a string, but the line is not in
the procedure file or the file is empty, or the range of lines specified
in the @COMPARE statement is invalid.
Error switch: EDT.
If a non existing line number has been specified for a string while an EDT
procedure (@DO or @INPUT) is being processed, and logging has not been
activated by means of the PRINT operand, this message is not displayed
and the EDT error switch is not set either. However the statement will not
be processed.
EDT4933
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4933 MODULE LOADING NOT POSSIBLE
Meaning
It is not possible to load the module (e.g. EDTSTRT) by means of the
@RUN or @USE statement.
Error switch: EDT.
EDT4934
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4934 FILE HAS ACCESS METHOD SAM
Meaning
The first file name specified in the @OPEN statement is the name of a
SAM file. A copy of the SAM file can be processed in real mode by
specifying '@OPEN <file1> AS <file2>'.
Error switch: EDT.
EDT4935
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4935 FILE IS OPENED REAL
Meaning
An attempt was made to process a statement that is not permissible
as long as the file is opened real by means of @OPEN
(e.g. @RENUMBER).
Error switch: EDT.
EDT4936
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4936 'KEY-POSITION <>5' AND 'RECORD-FORMAT=*VARIABLE' NOT SUPPORTED
Meaning
It is not possible to process a file with that catalog properties by means
of @GET, @SAVE or @OPEN.
Error switch: EDT.
EDT4937
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4937 NO MORE SPACE FOR OPERAND VALUES
Meaning
A current operand value or a formal keyword value consisting of n
characters uses (n+1) bytes of a virtual memory page reserved for
procedure file arguments (values). With the exception of empty
operands, this message is displayed if a value causes more than
4096 bytes to be used.
For more detailed information on the error see the "EDT" manual.
Error switch: EDT.
EDT4938
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4938 NO MORE SPACE FOR OPERANDS
Meaning
A formal operand of length n (including the '&' character) is using (n+4)
bytes on a page of the virtual memory reserved for formal operands of
procedure files. If an operand causes more than 4096 bytes to be used
this message is displayed.
The page for formal operands will not be allocated if no operands are
used. It will be returned after all procedure files have been dropped
by means of the @DROP statement, or if no more @INPUT files are active.
For more detailed information on the error see the "EDT" manual.
Error switch: EDT.
EDT4939
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4939 '@END' WITHOUT '@PROC' STATEMENT
Meaning
An @END statement has been specified but there is no procedure file which
has to be ended, that means that the current work file is work file 0.
Error switch: EDT.
EDT4940
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4940 POSITION VALUES NOT ASCENDING
Meaning
The values in a @TABS statement to define the positions of the
hardware tabulators and the software tabulators (in Unicode mode) must be
in ascending order.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT4941
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4941 NO POSITIONS DEFINED
Meaning
Tabulators cannot be activated until the positions have been defined.
Error switch: EDT.
Response
Define the positions using the @TABS statement.
EDT4942
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4942 STATEMENT ONLY POSSIBLE IN PROCEDURE FILE
Meaning
A @RETURN or @GOTO statement (in compatibility mode also an @IF statement)
can only be executed while a procedure file is being processed.
Error switch: EDT.
EDT4943
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4943 CHANGE OF CCS NOT POSSIBLE - WORK FILES NOT EMPTY
Meaning
A change of the coded character set is only possible, if all work files
are empty. Either a @CODENAME statement was issued, or a file with a
CCS name different from the actual was to be input or opened (@READ
@OPEN,..).
Error switch: EDT.
Response
Re-enter statement after closing opened files and deleting work files.
EDT4944
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4944 @PARAMS STATEMENT MISSING
Meaning
The @DO statement contains operands, but there is no @PARAMS statement in
the procedure file, or it is not the first statement in the procedure
file.
Error switch: EDT.
EDT4945
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4945 NOT POSSIBLE ON THIS TERMINAL
Meaning
Possible error cause:
- An attempt was made to change the screen dimension with a @VDT statement
for a terminal other than a 9763.
- An attempt was made to define hardware tabulators for a 3270 terminal.
Error switch: EDT.
EDT4946
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4946 OVERFLOW ERROR
Meaning
The result of an integer expression exceeds the highest positive
or negative value of an integer variable (2^31-1,-2^31).
Error switch: EDT.
EDT4947
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4947 PAM FILE NOT SUPPORTED
Meaning
An attempt was made to process a PAM file by means of a @GET, @READ
@INPUT, @OPEN, @ELIM, @SAVE or @WRITE statement. PAM files are not
supported by EDT.
Error switch: EDT.
EDT4948
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4948 POSITIONAL OPERAND AFTER KEYWORD OPERAND
Meaning
In a @DO statement a positional operand has been specified after a
keyword operand.
Error switch: EDT.
EDT4949
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4949 PROCEDURE FILE IS EMPTY
Meaning
An EDT procedure started by means of a @DO statement is empty.
Error switch: EDT.
EDT4950
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4950 WORK FILE IS UNDEFINED
Meaning
No work file was specified in the @DO statement and no work file has
been left with @END before.
In compatibility mode, a possible error cause also may be that in a @DO
or @COMPARE statement a procedure file has been specified that
has not been used yet.
Error switch: EDT.
EDT4951
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4951 WORK FILE IS EMPTY. STATEMENT NOT PROCESSED
Meaning
The statement refers to a line number which cannot be found as the
work file is empty.
Error switch: EDT.
EDT4952
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4952 NO SEPARATOR DEFINED
Meaning
The statement @SEPARATE has been issued without operator AT. As there
has not been defined a separator with @PAR SEPARATOR before, the
statement cannot be performed.
Error switch: EDT.
Response
Issue the character for separation in the statement @SEPARATOR after the
operand AT or preset it with @PAR SEPARATOR.
EDT4953
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4953 NO CHARACTER FOR TABULATOR DEFINED
Meaning
The statement @TABS RANGE has been issued. But there has not been
activated a character for tabulator yet.
Error switch: EDT.
Response
Define and activate a character and positions for the tabulator
before repeating @TABS RANGE.
EDT4954
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4954 REQM ERROR. PLEASE ACKNOWLEDGE. REPLY (Y=YES)
Meaning
The attempt by EDT to allocate additional memory is rejected with a
return code, or the ENTRLINE routine has been called by an EDT subroutine
(@RUN), but no virtual memory is available.
Error switch: not set.
Response
Y: EDT returns to the next free line number.
Else: The message will be repeated.
If this message is output during processing of an EDT procedure, the
processing can be ended by issuing K2 and /INTR.
EDT4955
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4955 PROCEDURE FILE(S) NOT YET TERMINATED
Meaning
A @DROP statement is not permitted while there are nested procedure files
which are not yet terminated.
Error switch: EDT.
EDT4956
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4956 SYSDTA EOF
Meaning
EDT issued a read instruction, but an end-of-file condition occurred.
If 'EOF' is reported by RDATA (@EDIT ONLY mode), the EDT will switch to
WRTRD (@EDIT mode). If 'EOF' is reported by WRTRD or in batch mode
EDT will issue a BKPT. Then the EOF condition can be reset, and
processing can be continued by means of the /RESUME-PROGRAM command.
Error switch: EDT.
EDT4957
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4957 SYSDTA NOT ASSIGNED OR READ ERROR
Meaning
The RDATA macro supplied the return code X'14' or X'18'. The EDT run
will be aborted and the message "EDT8001 EDT TERMINATED ABNORMALLY"
displayed.
Error switch: EDT.
EDT4958
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4958 @SYSTEM STATEMENT INCORRECT
Meaning
The command specified in the @SYSTEM statement contains an invalid operand
or returned an DMS error.
Error switch: DMS.
EDT4959
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4959 WORK FILE ALREADY ACTIVE
Meaning
A work file that is currently used to execute a @DO procedure
(active work file), can not be made the actual work file.
Error switch: EDT.
EDT4960
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4960 TIAM MACRO ERROR
Meaning
One of the macros WROUT, WRTRD, RDATA or MSG7 reported an error with
return code X'04' or X'08'.
EDT terminates with the message "EDT8001 EDT TERMINATED ABNORMALLY".
In the case of the return code X'08' an area dump is output additionally.
Error switch: not set.
EDT4961
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4961 TOO MANY PROCEDURE FILES ACTIVE
Meaning
Only 22 procedure files can be processed at the same time.
The @DO statement is rejected.
Error switch: EDT.
EDT4962
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4962 TOO MANY NESTED PROCEDURE FILES
Meaning
Only 22 procedure files can be nested. The @PROC statement is rejected.
In compatibility mode, the @INPUT statement is rejected too.
Error switch: EDT.
EDT4963
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4963 TOO MANY OPERANDS
Meaning
There are more current operands in the @DO statement than formal operands
in the @PARAMS statement.
Error switch: EDT.
EDT4964
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4964 LINE NUMBER AREA EMPTY
Meaning
A @ statement (or in Unicode mode a @SET statement, format 6) has been
specified to make the last stored pair of line number and increment the
actual line number and increment. However no more entries exist in the
line number area.
Error switch: EDT.
EDT4965
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4965 TOO MANY POSITIONAL OPERANDS
Meaning
There are more positional operands in a @DO statement than have been
specified in a @PARAMS statement.
Error switch: EDT.
EDT4966
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4966 'UPDATE' FOR ISAM FILE NOT POSSIBLE
Meaning
A @WRITE statement with UPDATE operand has been specified for an
ISAM file.
Error switch: EDT.
EDT4967
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4967 'UPDATE' FOR SAM FILE NOT POSSIBLE
Meaning
A @SAVE statement with UPDATE operand has been specified for a
SAM file.
Error switch: EDT.
EDT4968
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4968 WORK FILE NOT EMPTY
Meaning
There are still some lines in the work file. Opening a file for real
processing using @OPEN statement is only permitted if the work file
is empty.
Error switch: EDT.
EDT4969
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4969 WRONG VERSION: (&00) (&01)
Meaning
A file name has been specified in a statement with a wrong version
number. In this message EDT displays the correct version number of
the file. If the file is only to be read, the statement will be
processed. In the case of write access, the statement will not be
processed. If a statement containing a wrong version number (write
and read access) is read from an @INPUT file, the procedure will be
aborted.
Error switch: DMS.
EDT4971
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4971 FIRST FILE EMPTY OR NOT CATALOGED
Meaning
An AS file has been specified in an @OPEN statement but the first file
is either empty or not cataloged.
Error switch: EDT.
EDT4972
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4972 @ELIM STATEMENT FOR SAM FILE ILLEGAL
Meaning
The @ELIM statement is only allowed for ISAM files.
Error switch: EDT.
EDT4973
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4973 @UPDATE STATEMENT IN BINARY MODE NOT POSSIBLE
Meaning
After activation of binary mode by means of the @INPUT statement
an @UPDATE statement (format 2) has been specified for corrections.
Error switch: EDT.
EDT4974
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4974 LINE NOT IN PROCEDURE FILE
Meaning
The line number specified in a @GOTO statement does not exist in the
procedure file.
Error switch: EDT.
EDT4975
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4975 BIND NOT SUCCESSFUL
Meaning
In the specified module library, DLL could not find any module
with the ENTRY or CSECT name specified in a @RUN statement.
Error switch: EDT.
EDT4976
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4976 STATEMENT INHIBITED FOR USER
Meaning
A statement was given by the user (@RUN, @LOAD, etc.)
which is not permitted at the moment.
Possible reasons are:
- running under an userid with special privileges
- running in a non-interruptable procedure
- statement has been inhibited by the calling program.
Error switch: EDT.
EDT4977
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4977 'RECORD-FORMAT=*UNDEFINED' ILLEGAL
EDT4978
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4978 INVALID IN F-MODE
Meaning
The statement is not allowed in full screen mode.
EDT4980
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4980 ILLEGAL OR UNKNOWN CCS NAME
Meaning
The CCSN specified in a @CODENAME statement or the CCSN of a file or
library element to be read (@READ, @OPEN, @COPY, @INPUT) or the CCSN
specified in the CODE operand of a Unicode statement is unknown.
Error switch: EDT.
EDT4981
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4981 RECORD-SIZE > 256. FILE NOT WRITTEN
EDT4982
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4982 REQUESTED JOB VARIABLE NOT CATALOGED
Meaning
The name of the job variable specified in a @GETJV, @STAJV, or @ERAJV
statement has not been found in the catalog, or no name was specified
in a @STAJV statement and no job variables exist in the actual user id.
Error switch: EDT, DMS.
EDT4983
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4983 CHANGE OF OPERATION MODE NOT POSSIBLE
Meaning
A statement was given to switch from compatibility mode to Unicode mode
(@MODE, @CODENAME) or vice versa (@MODE). However a mode change is only
possible if all work files are empty and no files are opened.
If the statement for switching to compatibility mode was read from an
EDT start procedure or from SYSDTA, the character set of this input file
additionally must be useable in compatibility mode.
Error switch: EDT.
Response
Close opened files (@CLOSE), delete work files (@DELETE)
and re-enter the statement. If necessary, correct input file.
EDT4984
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4984 NON-NUMERIC KEY
Meaning
When reading a file an attempt was made to access a record whose key
cannot be made a EDT line number. Processing of the statement was aborted.
Error switch: EDT, DMS.
EDT4985
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4985 WRONG VERSION FOR FILE (&00), CORRECT VERSION (&01)
Meaning
The file (&00) has been specified in a write access statement with a
wrong version number. The correct version number is (&01).
The statement will not be processed.
Error switch: EDT, DMS.
EDT4986
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4986 FILE HAS NON STANDARD KEY LENGTH
Meaning
An ISAM file could not be accessed to because its key length is different
from 8.
Error switch: EDT.
Response
If key length is < 8, use @OPEN format 1 with operand TYPE=CATALOG or
@GET/@SAVE with linkname EDTISAM.
If key length is > 8, use @READ/@WRITE with linkname EDTSAM.
EDT4987
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT4987 FILE HAS FIXED RECORD FORMAT
Meaning
A file could not be accessed to because it has fixed record format.
Error switch: EDT.
Response
Use @OPEN format 1 with operand TYPE=CATALOG instead.
EDT5065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5065 INVALID RANGE: LOWER LIMIT > UPPER LIMIT
Meaning
The first line number specified in the range is higher than the second
one.
Response
Correct and re-enter the statement.
EDT5080
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5080 OPERANDS '$0'..'$9', 'FIRST', 'LAST' NOT SUPPORTED
Meaning
The specified operands <wkflvar>, FIRST (or FI) or LAST (or LA)
are invalid here.
Response
Instead of @SETF FI use @SETF or @SETF %.
Instead of @SETF LA use @SETF $.
Correct and re-enter statement.
EDT5122
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5122 NO FILE NAME
Meaning
No file name has been specified in the @WRITE or @XWRITE statement and no
file is opened for writing back.
Error switch: EDT.
EDT5126
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5126 '(&00)' NOT POSSIBLE: WORK FILE 0 IS OPEN
Meaning
The file or library element could not be opened because an ISAM file has
been opened real in work file 0 by means of the statement @OPEN
(format 1). A subsequent @OPEN (format 2) or @XOPEN is rejected.
Error switch: EDT.
Response
Enter the @CLOSE statement in order to close the file opened by means of
the @OPEN statement.
EDT5177
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5177 NO FILE TO CLOSE
Meaning
A @CLOSE statement was given, but no file is opened.
Error switch: EDT.
EDT5179
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5179 PLAM MEMBER MISSING. STATEMENT NOT PROCESSED
EDT5180
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5180 '@CLOSE' OR '@CLOSE NOWRITE' EXPECTED
Meaning
An attempt was made to process a file or library element by means of the
@OPEN or @XOPEN statement, although another file or library element is
already open in that work file.
Error switch: EDT.
Response
Close the processed file or library element by means of @CLOSE or
@CLOSE NOWRITE and re-enter the statement.
EDT5181
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5181 NO LIBRARY NAME DEFINED
Meaning
Neither in the statement itself nor using the @PAR LIBRARY statement a
library name has been defined.
Error switch: EDT.
EDT5188
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5188 NUMBER OF LINES NOT PERMISSIBLE
Meaning
The number specified in the SPLIT statement or in the SPLIT operand of the
@PAR statement for the number of lines in the second work window would
mean that one of the two work windows would contain less than 2 lines.
Error switch: EDT.
EDT5189
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5189 '(&00)' NOT POSSIBLE: A FILE IS OPENED IN WORK FILE 9
Meaning
A (&00) statement was issued but cannot be performed, for a file is opened
in work file 9.
Response
Close the file opened in work file 9.
EDT5191
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5191 '(&00)' NOT POSSIBLE. WORK FILE (&01) IS NOT EMPTY
Meaning
Statement (&00) (e.g. @OPEN, @XOPEN,...) can only be processed
if the work file (&01) is empty.
Error switch: EDT.
Response
Select another work file or delete the specified work file and re-enter
the statement.
EDT5221
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5221 READ ERROR ((&00)): DMS ERROR CODE: '(&01)'
Meaning
The @OPEN or @COPY statement (format 2) has not been processed due to a
read error of the access method (&00).
(&01): DMS error code.
For more detailed information about the DMS error enter the
ISP command /HELP DMS(&01) or the SDF command /HELP-MESS DMS(&01)'-
in system mode, or see the BS2000 manual "System Messages" or one
of the BS2000 DMS manuals.
EDT5224
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5224 INVALID ACCESS-METHOD
Meaning
Possible reasons:
- The file specified in a @COPY, @OPEN or @WRITE statement cannot be
processed by EDT because its access-method is neither SAM nor ISAM.
- An attempt was made to write to a not yet existing file associated with
the link name EDTISAM and the access method SAM using the @SAVE
statement.
Error switch: EDT, DMS.
Response
Convert the specified file into a SAM or ISAM file resp. change the
access method.
EDT5225
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5225 INVALID RECORD-FORMAT
Meaning
The RECORD-FORMAT of a file specified in a @COPY, @OPEN or @WRITE
statement (format 2) cannot be processed by EDT.
At present, EDT supports only files with variable record format.
Response
Convert the specified file to a file with RECORD-FORMAT=VARIABLE.
EDT5226
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5226 '@OPEN' NOT POSSIBLE: RECORD SIZE > 256
Meaning
A file with fixed record size larger than 256 bytes cannot be handled
by means of @OPEN. The contents of the records would get lost from column
257 on.
Error switch: EDT.
EDT5233
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5233 SET ERROR (ISAM): DMS ERROR CODE: '(&00)'
Meaning
The @COPY statement (format 2) has not been processed due to a SET error.
(&00): DMS error code.
For more detailed information about the DMS error enter the
ISP command /HELP DMS(&00) or the SDF command /HELP-MESS DMS(&00)
in system mode, or see the BS2000 manual "System Messages" or one
of the BS2000 DMS manuals.
EDT5237
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5237 WRITE ERROR ((&00)): DMS ERROR CODE: '(&01)'
Meaning
The @CLOSE or @WRITE statement has not been processed due to a write error
in the access method (&00).
(&01): DMS error code.
For more detailed information about the DMS error enter the
ISP command /HELP DMS(&01) or the SDF command /HELP-MESS DMS(&01)
in system mode, or see the BS2000 manual "System Messages" or one
of the BS2000 DMS manuals.
EDT5241
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5241 FILE '(&00)' FOR COPY OPERATION DOES NOT EXIST
Meaning
The file specified in the COPY statement does not exist. The statement has
not been processed.
(&00): File name.
EDT5244
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5244 'COPY' STATEMENT WITH 'KEEP' ONLY VALID FOR ISAM FILES
EDT5245
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5245 INVALID RECORD KEY
Meaning
It is not possible to read an ISAM file with an alphanumeric record key.
EDT5246
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5246 SECONDARY KEY(S) INCOMPLETLY SET
Meaning
The ISAM file has been written. While restoring the secondary keys
afterwards an error has been reported.
Error switch: EDT.
Response
Check data of secondary keys.
EDT5250
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5250 ERROR CODE '(&00)' IN PLAM FUNCTION '(&01)'
Meaning
The PLAM function (&01) (i.g. DETACH, ATTACH,..) called when processing
the statement supplied the error code (&00). The statement has not been
processed.
EDT5251
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5251 ERROR CODE '(&00)' IN PLAM FUNCTION 'CLOSE'
Meaning
The PLAM function CLOSE called when processing the CLOSE statement
supplied the error code (&00). The statement has not been processed.
EDT5252
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5252 MAXIMUM LINE NUMBER
Meaning
The line number 9999.9999 has been reached. When input from a file or a
SDF-P variable the number of records or list elements is too high.
Error switch: EDT.
EDT5253
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5253 SPECIFIED FILE IS NOT A PLAM LIBRARY
Meaning
The file specified in the operand LIBRARY of a @OPEN, @COPY, @WRITE,
@DELETE, @INPUT or @SHOW statement or predefined in a @PAR statement
cannot be accessed by PLAM.
Error switch: EDT.
EDT5254
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5254 (&00) NOT IN SYSTEM
Meaning
The specified statement could not be processed because the subsystem (&00)
is not available in the system.
Error switch: EDT, DMS.
EDT5255
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5255 ERROR CODE '(&00)' IN PLAM FUNCTION 'GETA'
Meaning
The PLAM function GETA called when processing the statement supplied the
error code (&00). The statement has not been processed.
EDT5256
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5256 ERROR CODE '(&00)' IN PLAM FUNCTION 'ATTACH' / DMS ERROR CODE '(&01)'
Meaning
During statement processing the called PLAM function ATTACH reported
the error code (&00). The statement has not been processed.
(&01): DMS error code.
For more detailed information about the DMS error enter the
ISP command /HELP DMS(&01) or the SDF command /HELP-MESS DMS(&01)
in system mode, or see the BS2000 manual "System Messages" or one
of the BS2000 DMS manuals.
EDT5257
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5257 ERROR CODE '(&00)' IN PLAM FUNCTION 'OPEN'
Meaning
The PLAM function OPEN called when processing the OPEN statement supplied
the error code (&00). The statement has not been processed.
EDT5258
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5258 FILE '(&00)' ALREADY EXISTS
Meaning
The file (&00) specified in the @OPEN statement already exists.
The statement has not been processed.
Error switch: EDT.
EDT5259
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5259 CCS '(&00)' INCOMPATIBLE WITH TERMINAL
Meaning
A file or library element which was to be read or opened had the catalog
attribute (&00), or the CCS (&00) was asked for at a @CODENAME statement.
It is not possible to change the Coded Character Set to (&00), because the
terminal cannot be set to this.
Error switch: EDT.
EDT5261
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5261 'DELETE' NOT PROCESSED. LIBRARY '(&00)' DOES NOT EXIST
EDT5263
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5263 ERROR CODE '(&00)' IN PLAM FUNCTION 'PUTA'
Meaning
The PLAM function PUTA called when processing the statement supplied the
error code (&00).
The member has been closed but was not written back.
EDT5266
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5266 LIBRARY '(&00)' LOCKED
Meaning
The specified library (&00) is read-protected.
The statement has not been processed.
EDT5267
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5267 SPECIFIED LIBRARY '(&00)' DOES NOT EXIST
Meaning
The library specified in the statement cannot be processed, as it does not
exist.
Error switch: EDT.
EDT5268
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5268 MEMBER '(&00)' IS LOCKED
Meaning
The specified member could not be accessed, as it is either
protected against unauthorized access or has already been opened.
Error switch: EDT.
EDT5270
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5270 MEMBER '(&00)' IN LIBRARY '(&01)' NOT FOUND FOR UPDATE OPERATION
Meaning
The member (&00) in library (&01) specified in the @OPEN statement could
not be found. The statement has not been processed.
Response
Check PLAM typ of required member.
EDT5271
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5271 S-VARIABLE NOT FOUND FOR UPDATE
Meaning
A @SETVAR statement was issued with the operand MODE=UPDATE, but the
specified variable has not been defined.
Error switch: EDT.
EDT5272
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5272 S-VARIABLE ALREADY DECLARED
Meaning
A @SETVAR statement was issued with the operand MODE=NEW, but the
specified variable has already been defined.
Error switch: EDT.
EDT5273
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5273 MEMBER '(&00)' IN LIBRARY '(&01)' ALREADY EXISTS
Meaning
The member (&00) in the library (&01) specified in the @OPEN statement
with operand MODE=NEW already exists.
The statement has not been processed.
Error switch: EDT.
EDT5274
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5274 S-VARIABLE NOT DECLARED
Meaning
A @GETVAR, @GETLIST or @SETLIST statement could not be processed
because the specified variable has not been defined yet.
Error switch: EDT.
EDT5275
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5275 'COPY' NOT POSSIBLE: MEMBER '(&00)' DOES NOT EXIST
Meaning
The specified member could not be copied to the virtual data space
because the member does not exist.
The statement (@COPY, @INPUT Format2) has not been processed.
Response
Check PLAM typ of required member.
EDT5278
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5278 FILE '(&00)' PROTECTED BY PASSWORD
Meaning
Error switch: EDT, DMS.
Response
Contact the file owner.
EDT5279
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5279 FILE '(&00)' LOCKED
Meaning
The specified file either has already been opened or is read-protected
in compatibility mode.
Error switch: EDT, DMS.
EDT5281
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5281 FILE '(&00)' DOES NOT EXIST
Meaning
The file specified in the statement cannot be processed, as it does not
exist.
Error switch: EDT.
EDT5282
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5282 FILE '(&00)' IS EMPTY OR LOCKED
Meaning
The specified file has last-page pointer 0.
Possible reasons are:
- The file is empty.
- The file is assigned to SYSLST or SYSOUT.
Response
Re-enter statement later.
EDT5283
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5283 ERROR CODE '(&00)' IN PLAM FUNCTION 'DELETE'
Meaning
When attempting to delete a PLAM member the PLAM DELETE macro issued
error code (&00).
EDT5284
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5284 MEMBER '(&00)' DOES NOT EXIST
Meaning
The @DELETE statement for member (&00) could not be processed because
the specified member does not exist.
Error switch: EDT.
Response
Re-enter the statement with the correct member name and PLAM typ.
EDT5285
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5285 'SHOW': PLAM ERROR CODE '(&00)'
Meaning
When processing the @SHOW statement, a PLAM macro issued the error code
(&00).
EDT5286
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5286 INVALID USER TYPE
Meaning
The requested library element is not editable. The specified user type
is not equivalent to one of the PLAM types S,M,P,J,D or X.
Error switch: EDT.
EDT5287
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5287 NO MEMBERS OF SPECIFIED TYPE OR LIBRARY IS EMPTY
Meaning
The @SHOW statement has not been processed because no members of the
specified type exist, or the library is empty.
Error switch: EDT.
EDT5289
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5289 LINK NAME FOR JOB VARIABLE NOT DEFINED
Meaning
An attempt was made to access a job variable by calling it by link name
but a job variable with this link name is not defined.
Error switch: EDT, DMS.
EDT5290
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5290 BUFFER TOO SMALL
Meaning
EDT has readied a buffer for the output of a system macro:
e.g. for STAJV 8 pages of virtual memory space.
However, this buffer was too small to hold the complete output, with the
result that processing of the macro was rejected with an appropriate
return code.
Error switch: EDT.
Response
Reduce the scope of the output by issuing the statement (@STAJV or
@ERAJV) with a partially qualified job variable name
or in case of @SDFTEST, change the options for SDF.
EDT5291
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5291 SYSDTA EOF
Meaning
When attempting to read the next statement from SYSDTA the end of the file
(EOF) has been reached.
Error switch: EDT.
Response
Terminate EDT normally by means of the HALT statement.
EDT5293
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5293 REQM ERROR
Meaning
No virtual memory is available for file processing.
EDT5294
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5294 RELM ERROR
Meaning
An error has occurred while releasing virtual memory.
EDT5295
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5295 NO MORE MEMORY AVAILABLE
Meaning
No more virtual memory is available for file processing.
Error switch: EDT.
EDT5300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5300 INTERNAL EDT ERROR '(&00)'
Meaning
Internal EDT runtime error.
(&00): Error code.
Response
Contact the system support service.
EDT5310
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5310 UFS FILE '(&00)' DOES NOT EXIST
Meaning
The specified UFS-file (&00) cannot be dealt with, for it does not exist.
Error switch: EDT.
EDT5311
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5311 UFS FILE '(&00)' ALREADY EXISTS
Meaning
The file specified in @OPEN, @WRITE, @XOPEN oder @XWRITE cannot be handled
with the operand MODE=NEW, for it already exists as UFS-file.
Error switch: EDT.
EDT5312
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5312 INVALID ACCESS TO UFS FILE '(&00)'
Meaning
The UFS file whose name was specified in an @OPEN, @COPY, @WRITE, @INPUT,
@XOPEN, @XCOPY oder @XWRITE statement could not been opened
for reading or writing for the access was denied.
Error switch: EDT.
EDT5313
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5313 UNABLE TO CREATE UFS FILE '(&00)'
Meaning
The UFS file &00 could not be opened with MODE=NEW, for a directory
is missing.
Error switch: EDT.
EDT5320
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5320 SDF: NO PROGRAM NAME FOR TEST OF STATEMENTS DEFINED
Meaning
The user issued @SDFTEST PROGRAM or marked a line starting with '//' with
statement code T, but has not defined a program name yet.
Error switch: EDT.
Response
Issue @SDFTEST with operand PROGRAM=name or define a program
name with @PAR SDF-PROGRAM=name.
EDT5321
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5321 SDF: PROGRAM NAME UNKNOWN
Meaning
The program name which was to be used in the statement
@SDFTEST PROGRAM is not known in any active syntax file.
Error switch: EDT.
EDT5322
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5322 SDF: TEST OPERATION ABORTED
Meaning
Processing of @SDFTEST or the statement code T has been aborted.
A possible reason is that the statement to be tested has more than 255
continuation lines.
Error switch: EDT.
EDT5323
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5323 SDF: EXTERNAL PROGRAM NAME NOT SUPPORTED
Meaning
Specification of external program name in @SDFTEST or
@PAR SDF-PROGRAM statement is not supported with actual SDF version.
Error switch: EDT.
Response
Use internal program name instead.
EDT5324
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5324 SDF: SYNTAX TEST ABORTED BY USER
Meaning
The syntax check of SDF commands or SDF statements using @SDFTEST has
been aborted by user.
Error switch: EDT.
EDT5325
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5325 SDF: LINE TOO LONG
Meaning
A line to be checked syntactically exceeds the maximum length allowed
by SDF (16379 characters). The syntax check will be aborted.
Error switch: EDT.
EDT5326
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5326 SDF: OUTPUT TOO LONG
Meaning
The output for a line checked by SDF exceeds the maximum length allowed
by SDF (16379 characters). The syntax check will be aborted.
Error switch: EDT.
EDT5327
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5327 CANNOT CONVERT TO TERMINAL CCS
Meaning
The actual character set cannot be converted into the terminal character
set in order to allow a SDF error dialog. The syntax check will be
aborted.
Error switch: EDT.
EDT5340
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5340 CANNOT GET S-VARIABLE
Meaning
The statement @GETVAR or @GETLIST could not be processed because
the specified variable is not set to any value, or
the list does not contain any element.
Error switch: EDT.
EDT5341
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5341 S-VARIABLE LONGER THAN 256 CHARACTERS
Meaning
The @GETVAR statement could not be performed, for the value of the
specified variable is a string longer than 256 characters.
Error switch: EDT.
EDT5342
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5342 WRONG TYPE OF S-VARIABLE
Meaning
The @GETVAR or @SETVAR statement could not be processed, for the type of
the specified variable does not match the operand on the right side of the
equal sign.
Error switch: EDT.
Response
A SDF-P variable of type INTEGER can only be put to an integer variable
and vice versa.
EDT5343
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5343 WRONG TYPE OF LIST ELEMENT
Meaning
The statement @GETLIST or @SETLIST could not be processed for the elements
of the specified list variable are not of type STRING.
Error switch: EDT.
EDT5350
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5350 COMPARE RESULT CANNOT BE SHOWN
Meaning
The output file is one of the work files to be compared.
Error switch: EDT.
EDT5351
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5351 COMPARE OPERATION ABORTED
Meaning
While processing the @COMPARE statement (format 2), an unrecoverable error
occurred causing the compare operation to be aborted.
Error switch: EDT.
EDT5352
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5352 COMPARE OPERATION ABORTED, RENUMBER
Meaning
Processing of the @COMPARE statement (format 2) has been aborted. The last
byte of a line number used internally during comparison is not '0'. The
work files must be renumbered before the compare operation can be tried
again.
Error switch: EDT.
EDT5353
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5353 UNRECOVERABLE FORMAT ERROR ON SCREEN DISPLAY
Meaning
When building data for screen output, an unrecoverable format error
occurrred. EDT will be terminated.
EDT5354
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5354 STRUCTURE SYMBOL '(&00)' NOT FOUND
Meaning
The structure symbol (&00) does not exist in the specified line.
No positioning has been performed.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT5356
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5356 K-LINE NOT COPIED BECAUSE OF TERMINAL CONTROL CHARACTERS
Meaning
K-line cannot be copied to the statement line because it contains
screen control characters.
Error switch: not set.
EDT5357
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5357 LINE DOES NOT EXIST
Meaning
The line specified in format 2 of the @CODE statement by <ln> does
not exist.
Error switch: EDT.
EDT5358
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5358 LINE SHORTER THAN 256 BYTES
Meaning
The line specified in format 1 of the @CODE statement by <ln> is
shorter than 256 bytes.
Error switch: EDT.
EDT5359
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5359 MAXIMUM LINE NUMBER. COPY INCOMPLETE
Meaning
Processing of the COPY statement is aborted because the maximum
permissible line number has been exceeded.
(See also error message: EDT5252 MAXIMUM LINE NUMBER.)
Error switch: EDT.
EDT5360
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5360 NO COPY. BUFFER EMPTY
Meaning
The copy buffer is empty, therefore the statement code A/B/O cannot be
processed.
EDT5362
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5362 <TEXT> SPECIFICATION ILLEGAL IN CURRENT STATEMENT
EDT5364
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5364 NO INSERT: MAXIMUM LINE NUMBER
Meaning
New data lines cannot be inserted at the end of work file by means of a
statement or a statement code because this would cause the maximum
permissible number of lines to be exceeded.
Error switch: EDT.
EDT5365
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5365 NO INSERT: RENUMBERING INHIBITED
Meaning
The required lines cannot be inserted without renumbering the existing
lines. Renumbering is, however, inhibited as the operand RENUMBER=OFF has
been specified in a @PAR statement.
Error switch: EDT.
EDT5366
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5366 NO P-KEYS ON THIS TERMINAL
Meaning
The @P-KEYS statement has been called on a data display terminal without
p-keys.
EDT5368
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5368 SECOND STATEMENT LINE NOT EMPTY
Meaning
SPLIT OFF or @PAR with operand SPLIT=OFF has been specified in the first
statement line of the screen, even though the second statement line
contains a statement.
EDT5371
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5371 TARGET FILE IS CURRENT WORK FILE
Meaning
The statement has not been processed because the target file is identical
with the current work file.
EDT5372
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5372 ENTRY DOES NOT EXIST IN SPECIFIED LIBRARY OR TASKLIB
Meaning
The specified entry does not exist and could therefore not be loaded
dynamically.
Response
Correct and re-enter the statement, or create the library.
EDT5373
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5373 NO MORE THAN 5 USER SYMBOLS ARE PERMITTED
Meaning
5 is the maximum permissible number of user statement symbols that can be
specified using a @USE statement.
Error switch: EDT.
Response
Delete a symbol by means of the @USE statement and define a new symbol.
EDT5375
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5375 NO 'USE' ENTRY DEFINED WITH SPECIFIED SYMBOL
Meaning
The specified USE entry has not been defined and thus cannot be deleted.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT5376
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5376 STATEMENT BUFFER EMPTY
Meaning
The SHIH statement has not been processed because no statements
have been stored previously in the statement buffer.
EDT5380
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5380 SOME JOB VARIABLES NOT ERASED
Meaning
An attempt was made to erase all job variables whose name was specified
as partially qualified or using wildcards,
but some of these job variables could not be erased.
Possible reasons:
- the job variable is only open for read access
- the job variable is protected as a monitoring job variable.
Error switch: EDT.
EDT5381
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5381 JOB VARIABLES NOT ERASED
Meaning
More than one job variable matches the string specified in the @ERAJV
statement given in batch mode without an ALL operand.
The @ERAJV statement will not be processed.
Error switch: EDT.
EDT5400
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5400 NOT SUPPORTED ON THIS INTERFACE
Meaning
The statement is not possible in this work mode or at this subroutine
interface.
Error switch: EDT.
EDT5402
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5402 ENTER AT LEAST 2 CHARACTERS FOR '@DELETE'
Meaning
In F mode at least two characters (@D or DE) have to be specified if the
@DELETE statement is entered without any operands.
EDT5409
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5409 STATEMENT ILLEGAL IN THIS ENVIRONMENT
Meaning
A statement filter only can be defined if the @USE statement is issued
at the subroutine interface.
Error switch: EDT.
EDT5410
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5410 UNDEFINED ERROR IN USER PROGRAM
Meaning
EDT received an undefined return code from a user program without any
additional information.
Error switch: EDT.
Response
Correct the user program.
EDT5419
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5419 (&00)
Meaning
EDT received an undefined return code from a user program with the
message (&00).
Error switch: EDT.
Response
Correct the user program.
EDT5442
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5442 TERMINAL BUFFER TOO SMALL. SCREEN FORMAT SET TO F1
Meaning
With the choosen screen format, the length of screen output would exceed
the terminal buffer size. The screen format is changed to F1.
Error switch: EDT.
EDT5443
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5443 TERMINAL BUFFER TOO SMALL. CHANGED TO L-MODE
Meaning
The length of screen output in F mode would exceed the terminal buffer
size. The operating mode is changed to L mode.
Error switch: EDT.
EDT5444
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5444 FILE WRITE NOT POSSIBLE. RECORD LONGER THAN (&00) BYTES
Meaning
When writing a file using a @WRITE, @CLOSE or @SAVE statement, or writing
in a file opened in real mode, a record would exceed the maximum
file record size (&00). The record size may be limited by the blocking
factor or a fixed record length specification. It should be noted that for
Unicode character sets the record size in bytes may be greater than the
number of characters in the work file line, and that it may depend on
the chosen character set.
The file writing will be aborted or the real opened file will be closed.
Error switch: EDT.
EDT5445
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5445 DUPLICATE KEYS IN REAL OPENED FILE DETECTED
Meaning
In a file opened in real mode by means of an @OPEN statement duplicate
keys were detected. Processing of the file will be aborted.
Error switch: EDT.
EDT5446
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5446 LINE NUMBER TOO BIG
Meaning
In a file opened in real mode by means of an @OPEN statement a line number
cannot be used as key because it is too big for the specified key length
of the file.
Error switch: EDT.
EDT5447
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5447 PRINTING FAILED
Meaning
The immediate output to the printer has not been processed, because an
error occurred during the print system call.
Error switch: EDT, DMS.
EDT5448
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5448 CANNOT USE TEMPORARY FILE
Meaning
A temporary file is needed for immediately outputting a work file range to
the printer. However it is not available due to the actual BS2000 system
parameters.
Error switch: EDT.
EDT5449
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5449 NOT ENOUGH LINES FOR HEX MODE
Meaning
On a split screen there are less lines in the work window than would be
needed for diplaying a line in hexadecimal mode.
Error switch: EDT.
Response
Enlarge the work window (@PAR SPLIT).
EDT5450
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5450 NATIONAL EDT: INTERNAL ERROR. RETURNCODE = X'(&00)' AT CCS (&01)
Meaning
Processing of the user defined CCS (&01) was aborted on a national
terminal due to an internal error.
(&00): Error code.
Response
Contact the system support service.
EDT5451
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5451 CANNOT OPEN TAPE FILE
Meaning
A magnetic tape file cannot be opened by means of a @OPEN statement.
Error switch: EDT.
EDT5452
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5452 CHANGE OF CCS NOT POSSIBLE FOR REAL OPENED FILES
Meaning
An attempt was made to change the coded character set of the work file in
which a file is opened in real mode, or the coded character set of a file
to be opened in real mode is different from that of the actual work file.
The @CODENAME resp. @OPEN statement will not be processed.
Error switch: EDT.
EDT5453
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5453 SOME CHARACTER CANNOT BE CONVERTED
Meaning
Some characters of the string are not defined in the target character set.
The string cannot be converted.
Error switch: EDT.
Response
Define substitution character using @PAR SUBSTITUTION-CHARACTER.
EDT5454
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5454 ILLEGAL BYTE SEQUENCE IN INPUT DATA
Meaning
In a file, a job variable, a S variable or a record delivered over the
subroutine interface there is a byte sequence, which does not correspond
to a valid character in the target character set. The file, the variable
or the record will not be read.
Error switch: EDT.
EDT5456
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5456 SOME CHARACTERS CANNOT BE CONVERTED AND SOME LINES MUST BE TRUNCATED
Meaning
A check with @CHECK (Format 2) resulted both in characters not contained
in the target code set and in lines or string variables whose length is
longer than the maximum length allowed.
Error switch: EDT.
Response
Define substitution character using @PAR SUBSTITUTION-CHARACTER.
Split or shorten lines or string variables.
EDT5457
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5457 FILE CCS DIFFERENT FROM WORK FILE CCS, FILE NOT WRITTEN
Meaning
The coded character set of the work file is different from the coded
character set of the file the work file should be written to. The file
will not be written.
Error switch: EDT.
Response
Specify operand CODE in @CLOSE or @WRITE statement.
EDT5458
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5458 CCS CANNOT BE CHANGED
Meaning
In a @CREATE statement a coded character set is specified for the actual
work file. However this work file already has a different coded character
set. The @CREATE statement will not be processed.
Error switch: EDT.
EDT5459
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5459 CANNOT CREATE LINE NUMBER FROM ISAM KEY
Meaning
When reading an ISAM file whose key position is different from standard,
whose key length is too big or whose keys are not numeric, the line
number shall be built from ISAM key. The file will not be read.
Error switch: EDT.
Response
Read the file using KEY=DATA.
EDT5460
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5460 CANNOT CONVERT HEX OR BIN CHARACTER TO WORK FILE CCS
Meaning
A hexadecimal or binary value does not correspond to a valid character
in the work file's coded character set. The input is rejected.
Error switch: EDT.
EDT5461
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5461 QUOTE SYMBOL MUST BE DIFFERENT TO WILDCARD SYMBOLS
Meaning
An attempt was made to define a character as string delimiter symbol
(single or double quote) which is currently used as wildcard symbol (see
@SYMBOLS). The @QUOTE statement will not be processed.
Error switch: EDT.
EDT5462
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5462 SOME LINES MUST BE TRUNCATED
Meaning
A check with @CHECK (Format 2) resulted in lines or string variables whose
length is longer than the maximum length allowed.
Error switch: EDT.
Response
Split or shorten lines or string variables.
EDT5463
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5463 TABULATOR POSITION NUMBER EXCEEDS MAXIMUM VALUE SUPPORTED BY HARDWARE
Meaning
The number of hardware tabulator positions defined in the @TABS statement
exceeds the maximum value allowed by the terminal.
The statement will not be processed.
Error switch: EDT.
EDT5465
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5465 CANNOT CREATE ISAM KEY FROM LINE NUMBER
Meaning
When writing an ISAM file whose key position is different from standard or
whose key length is too big, the ISAM key shall be built from the line
number. The file will not be written.
Error switch: EDT.
Response
Write the file using KEY=DATA.
EDT5466
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5466 CANNOT IGNORE ISAM KEY
Meaning
When reading an ISAM file whose key position is different from standard,
the ISAM key shall be ignored. The file will not be read.
Error switch: EDT.
Response
Read the file using KEY=DATA.
EDT5467
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5467 NO FILE OPEN
Meaning
In the @CHECK statement CODE=*FILE was specified and no file is opened.
Error switch: EDT.
Response
Specify another value for CODE operand.
EDT5468
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5468 LENGTH OF ISAM KEY CHANGED, FILE NOT WRITTEN
Meaning
If an ISAM file was opened using @OPEN statement and the coded character
set was changed from UTF16 to another character set or vice versa either
explicitly or implicitly by specifying a corresponding CODE operand in the
@WRITE or @CLOSE statement, the file cannot be written back
because this would change the length of the ISAM key.
Error switch: EDT.
EDT5469
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5469 INITIALIZATION ROUTINE MISSING
Meaning
For a user subroutine in V17 format there must exist an initialisation
routine. The @RUN statement will not be processed.
Error switch: EDT.
EDT5470
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5470 VERSION ERROR IN INITIALIZATION ROUTINE
Meaning
The initialisation routine for an external statement routine or for a
user subroutine does not support the version of control block
(Returncode EUPVEERR is given).
The statement will not be processed.
Error switch: EDT.
EDT5471
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5471 RUNTIME ERROR IN INITIALIZATION ROUTINE
Meaning
An error occurrred in the initialisation routine for an external statement
routine or for a user subroutine (Returncode EUPRTERR is given).
Error switch: EDT.
EDT5472
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5472 MINIMUM LINE NUMBER
Meaning
Using the @- statement, an attempt was made to set the actual line number
to a number less than the smallest possible number (0.0001).
Error switch: EDT.
EDT5473
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5473 CCS OF STRING VARIABLES INCONSISTENT
Meaning
When a range of string variables is checked via @SEQUENCE statement
(format 3), either all variables must have a Unicode character set
or all must have a 7 bit or 8 bit character set.
The statement will not be processed.
Error switch: EDT.
EDT5474
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5474 MODIFIED LINE > 32768 CHARACTERS
Meaning
An edited line became too long as a result of modification with @COLUMN,
@PREFIX or @SUFFIX statement. Processing of statement will be aborted.
Error switch: EDT.
EDT5475
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5475 LINE NUMBER OUT OF RANGE
Meaning
The value of a line number given indirectly or as result of an arithmetic
expression is outside the valid range 0000.0001..9999.9999.
Error switch: EDT.
Response
Correct and re-enter the statement.
EDT5476
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5476 CANNOT DELETE AN ACTIVE WORK FILE
Meaning
A work file that is currently used to execute a @DO procedure
(active work file), cannot be deleted.
Error switch: EDT.
EDT5477
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5477 STRING CONTENT INVALID
Meaning
The content of a string which has to be interpreted as integer in the @SET
statement (format 1) or as line number in the @SET statement (format 3)
is invalid.
Error switch: EDT.
EDT5478
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5478 @PARAMS STATEMENT INVALID
Meaning
A syntactical error occurred in the @PARAMS statement of a @DO procedure
to be executed.
Error switch: EDT.
EDT5479
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5479 @PARAMS STATEMENT NOT FIRST LINE OF PROCEDURE
Meaning
The @PARAMS statement has to be in the first line of the @DO procedure
to be executed.
Error switch: EDT.
EDT5480
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5480 LINK NAME '(&00)' NOT DEFINED
Meaning
The link name specified in a @COPY, @OPEN, @WRITE or @INPUT statement
is not defined.
Error switch: EDT, DMS.
EDT5481
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5481 INVALID RECORD-FORMAT
Meaning
An attempt was made to access a file with RECORD-FORMAT=UNDEFINED or a
file with RECORD-FORMAT=FIXED which has an odd record size and the coded
character set UTF16. The statement will not be processed.
Error switch: EDT, DMS.
EDT5482
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5482 INVALID ACCESS TO FILE '(&00)'
Meaning
The file (&00) specified in an I/O statement could not be opened
as the access was denied.
Error switch: EDT, DMS.
EDT5483
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5483 INVALID ACCESS TO MEMBER '(&00)' IN LIBRARY '(&01)'
Meaning
The element (&00) of library (&01) specified in an I/O statement could not
be opened as the access was denied.
Error switch: EDT.
EDT5484
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5484 NO @FILE ENTRY DEFINED
Meaning
The file name operand is not given in an I/O statement, but neither a
local nor a global @FILE entry is defined.
Error switch: EDT.
EDT5485
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5485 INPUT TOO LONG
Meaning
If a statement with indirect operands is given, the sum of the operation
string length and the length of the string variable exceeds the
maximum line length of 32768 characters.
Error switch: EDT.
EDT5486
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5486 WILDCARD SYMBOL MUST BE DIFFERENT TO QUOTE SYMBOLS
Meaning
An attempt was made to define a character as wildcard symbol (ASTERISK,
SLASH) which is currently used as string delimiter symbol (see @QUOTE).
The @SYMBOLS statement will not be processed.
Error switch: EDT.
EDT5487
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5487 CCS '(&00)' NOT SUPPORTED BY TERMINAL
Meaning
The communication character set given in the @CODENAME ...,TERMINAL
statement cannot be used as it is not supported by the terminal.
Error switch: EDT.
EDT5488
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5488 TERMINAL NOT SUPPORTED
Meaning
The actual terminal is not supported by EDT (Unicode mode).
EDT5489
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5489 FILES MUST BE DIFFERENT
Meaning
An attempt was made to open the copy of a file for real processing
(AS operand). However both files specified in @OPEN are identical.
Error switch: EDT.
EDT5490
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5490 ILLEGAL CCS NAME SPECIFIED
Meaning
An illegal CCS name was specified at the subroutine interface.
Error switch: EDT.
EDT5491
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5491 XHCS MISSING OR HAS WRONG VERSION
Meaning
The subsystem XHCS does not exist or it has a version not sufficient for
EDT. EDT can not be started.
Error switch: EDT.
EDT5492
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5492 ILLEGAL RECORD FORMAT
Meaning
There are Format-B records in the library element. EDT cannot process
these records.
Error switch: EDT.
EDT5493
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5493 STRING CANNOT BE CONVERTED
Meaning
Some characters of a string in the @ON statement are not defined in the
character set of the line actually processed. The string cannot be
converted. Processing of statement will be aborted.
Error switch: EDT.
EDT5494
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5494 'FORCE' OPERAND NOT ALLOWED
Meaning
The FORCE operand in the @CODENAME statement is not allowed for Unicode
character sets.
Error switch: EDT.
EDT5495
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5495 NO FILES CORRESPONDING TO SPECIFIED OPERANDS
Meaning
No files match the file specification in @SHOW or @FSTAT statement.
Error switch: EDT.
EDT5496
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5496 INVALID VALUE FOR ATTRIBUTE (&00) IN TFT
Meaning
The file specified via a link name cannot be created, because the
attribute (&00) in the Task File Table has an invalid value.
Error switch: EDT, DMS.
EDT5497
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5497 '(&00)' NOT POSSIBLE FOR PLAM ELEMENT TYPE '(&01)'
Meaning
Library elements of the type R, C, H, L, U, F or corresponding free type
cannot be used with the statements @COPY, @OPEN, @WRITE or @INPUT.
Error switch: EDT.
EDT5498
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5498 CANNOT WRITE TO SYSLST
Meaning
When writing to SYSLST, an error occurred. Output will be terminated.
Messages of EDT will be logged to SYSOUT from now.
Error switch: EDT.
EDT5499
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5499 WORK FILES MUST BE DIFFERENT
Meaning
Both work files specified in @COMPARE statement are identical.
Error switch: EDT.
EDT5500
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5500 STATEMENT SEQUENCE PROCESSING INTERRUPTED BY USER
Meaning
A statement sequence was specified in F-Mode dialog, in L-Mode dialog
(block mode) or at the subroutine interface. The processing
was interrupted by the user by means of a /INFORM-PROGRAM or
/INTR command.
In F-Mode dialog, the rest of the statement sequence, which has not been
processed, is output to the command line.
EDT5501
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5501 STATEMENT '(&00)' INTERRUPTED BY USER
Meaning
The processing of statement (&00) was interrupted by the user by means
of a /INFORM-PROGRAM or /INTR command.
EDT5502
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5502 PROCEDURE INTERRUPTED BY USER
Meaning
The processing of a @DO or @INPUT procedure was interrupted by the user
by means of a /INFORM-PROGRAM or /INTR command.
EDT5990
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5990 (&00)
Meaning
The test routine reports an error with the message (&00).
Error switch: EDT.
EDT5991
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5991 RUNTIME ERROR IN EXTERNAL STATEMENT
Meaning
The external routine reports a runtime error in the execution of the
specified statement without any additional information.
Error switch: EDT.
EDT5999
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT5999 (&00)
Meaning
The external routine reports a runtime error in the execution of the
specified statement with the message (&00).
Error switch: EDT.
EDT8000
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8000 EDT TERMINATED
Meaning
EDT termination message in the case of a normal program termination.
EDT8001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8001 EDT TERMINATED ABNORMALLY
Meaning
EDT termination message in the case of an abnormal program termination.
EDT8002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8002 (&00) TO EDT UNSUCCESSFULLY. RETURNCODE = X'(&01)'
Meaning
An error has occured during the dynamic loading of EDT. The macro
(&00) rejected the loading with returncode (&01).
If the retuncode is X'0C010104', then a call of EDT under service user id
is only possible if EDT subsystem is loaded.
EDT8003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8003 NO VIRTUAL MEMORY AVAILABLE
Meaning
The initialisation of EDT could not be processed, as there is not enough
memory for the EDT internal data.
Response
Release virtual memory.
EDT8005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8005 ERROR ON EDT INITIALIZATION
Meaning
An error occurred during initialisation of EDT.
EDT8006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8006 ERROR ON INSTALLATION OF EDT
Meaning
The EDT installation items are inconsistent, or EDT cannot be started
under current operating system version.
Response
Check and correct the installation of EDT.
EDT8100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8100 EDT INTERRUPTED BY USER
Meaning
This message serves as information for SDF-P procedures.
EDT is loaded, but has been interrupted by @SYSTEM (without operand) or by
an explicit K2.
EDT8101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8101 USER TERMINATED EDT ABNORMALLY
Meaning
The user terminated EDT by the statement @HALT ABNORMAL.
EDT8200
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8200 STXIT ROUTINE FOR RUNOUT ACTIVATED
Meaning
The end of the program run time has been reached, therefore EDT is
terminated.
EDT8292
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8292 UNRECOVERABLE READ ERROR. PROGRAM ABORTED
Meaning
An unrecoverable error occurred while reading from SYSDTA or from
terminal. EDT is terminated.
EDT8293
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8293 UNRECOVERABLE WRITE ERROR. PROGRAM ABORTED
Meaning
An unrecoverable error occurred while writing to SYSOUT. EDT is
terminated.
EDT8300
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8300 INTERNAL EDT ERROR '(&00)'
Meaning
EDT program error.
Response
Contact the system administrator.
EDT8900
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8900 NO VIRTUAL ADDRESS SPACE AVAILABLE
Meaning
During loading, EDT requests 4 pages in the virtual address space
for data and variables by means of REQM. If REQM encounters an error
this message is displayed and EDT is terminated. If EDT is called as a
subroutine, return code X'10' is supplied right-justified in register 15.
EDT8901
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8901 ERROR RECOVERY FAILED. EDT ABORTED
Meaning
The interrupt error recovery after a data error could not be completed
successfully.
Error switch: not set.
EDT8902
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8902 '@HALT' STATEMENT PROCESSED
Meaning
A data error or an unrecoverable error occurred in an EDT batch job.
Error switch: EDT.
EDT8910
Destination: USER-TASK Routing code: Weight:
Warranty : NO
EDT8910 EDT INTERRUPTED AT LOCATION '(&00)', INTERRUPT WEIGHT=(&01)
Meaning
A program interruption of event class "program error" or "unrecoverable
program error" occurred at location (&00). Detailed information about
the error cause is given by the interrupt weight (&01).
Response
Contact the system administrator.