Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP0101 FATAL ERROR DURING ERROR HANDLING, DAMP TERMINATED
Meaning
An error occurred in the procedure for error handling.
This must lead to an emergency termination of DAMP.
Response
Send the dump generated by DAMP to your FUJITSU TECHNOLOGY SOLUTIONS
service center.
DMP040A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP040A ENGLISH MESSAGES FOR DAMP V04.0A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP041A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP041A ENGLISH MESSAGES FOR DAMP V04.1A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP042A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP042A ENGLISH MESSAGES FOR DAMP V04.2A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP043A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP043A ENGLISH MESSAGES FOR DAMP V04.3A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP044A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP044A ENGLISH MESSAGES FOR DAMP V04.4A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP045A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP045A ENGLISH MESSAGES FOR DAMP V04.5A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP046A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP046A ENGLISH MESSAGES FOR DAMP V04.6A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP047A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP047A ENGLISH MESSAGES FOR DAMP V04.7A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP048A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP048A ENGLISH MESSAGES FOR DAMP V04.8A EXISTING
Meaning
This message is used by DAMP while checking the activated
messagefile.
DMP049A
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP049A ENGLISH MESSAGES FOR DAMP V04.9A EXISTING
Meaning
This message is used by DAMP while checking the activated
message file.
DMP0601
Destination: USER-TASK Routing code: Weight: 09
Warranty : NO
DMP0601 FATAL ERROR WHILE HANDLING STXIT EVENT; DAMP TERMINATED
Meaning
An error occurred in the DAMP STXIT handler.
This must lead to an emergency termination of DAMP.
Response
Send the dump generated by DAMP to your FUJITSU TECHNOLOGY SOLUTIONS
service center.
DMP0602
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP0602 BREAK OCCURRED WITHIN PASCAL RTS, YOU MAY ONLY ENTER /RESUME-PROGRAM
Meaning
You pressed K2 and interrupted DAMP within the Pascal runtime
system. In this case, no /INFORM-PROGRAM command is possible.
Response
Continue the program with /RESUME-PROGRAM and try K2 again.
DMP0603
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP0603 AN EVENT COULD NOT BE HANDLED PROPERLY. THE EVENT IS LOST
Meaning
A contingency was started while DAMP was within the Pascal
runtime system or within an external (RUN) procedure.
In this case the event is lost.
Response
This problem should occur only when testing with PATH. In all
other cases retry the last action. If the problem is
persistent, call your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP1101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DMP1101 ERROR (&00) OCCURRED WHEN PROCESSING MSG (&01)
Response
Check the integrity of the DAMP message files.
If they are O.K., call the FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP1201
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1201 DMS ERROR (&00) WHILE ACCESSING DOC FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP1600
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1600 EXPLANATION OF THE ANITA ERROR CODES
Meaning
Meaning of the ANITA error codes :
Form of the error inserts : xxyymmmmm/M
AN... shows the macro from which the error code originates.
ANCONA
ANOPEN
ANCLOSE
ANSEL
ANINO
ANSECT
ANDRESS
ANLDATA
ANDAT
The following error codes are macro-independent :
0001FFFF Unit and/or function number invalid.
0002FFFF Error when loading the anchor or a processing module
0003FFFF Version number invalid.
0004FFFF Alignment error of the parameters.
0080FFFF ANITA tables blocked up by ANITA lock.
xx200001 Internal error in ANITA.
(xx200001/C : ANITA cannot be used. )
xx010003 Syntax error in the parameters.
xx010004 Description of the buffer is incorrect.
xx400006 DMS error when accessing file.
00400007 ANCA or ANOD is invalid, or they don't fit.
( Except 00400007/U : See there. )
xx400008 Wrong object. Precise meaning depending on macro and SC2.
or TPR ANITA.
xx400009 The information could not be supplied ( completely ).
( For 00400009/L : See there. )
xx40000B Test privilege when accessing the system is too low.
0020000D Memory not available.
0020000E Error when loading a processing module.
xx40000F Incorrect or incomplete index structure in the dump file.
Macro-specific error codes :
ANCONA
0102FFFF ANITA cannot run in this environment.
01000000 Repeated ANCONCT of the same task or program.
ANOPEN
xx400007 Object not accepted by ANITA.
xx000000 Object accepted, but with restrictions.
ANDRESS
08000000 ANOD=*ALL was stated, and for the specified
ANCA no object was declared.
ANLDATA
01000000 The information could not be completely transferred because
the buffer was too small.
02000000 The information has not been completely transferred.
03000000 Return codes X'01000000' and X'02000000' at the same time.
00400009 The information could not be supplied because the task
was not addressable or BTHINFO=parameter was incorrect.
xx40000C Information not available.
DMP1601
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1601 INSUFFICIENT TEST PRIVILEGE FOR SYSTEM ACCESS ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
Use the statement MODIFY-TEST-OPTIONS for increase of privilege.
DMP1602
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1602 TCB FOR TID (&00) NOT FOUND ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1603
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1603 TCB FOR TID (&00) DESTROYED ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1604
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1604 TASK WITH TID (&00) NOT ACTIVE ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1605
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1605 PAGE (&00) NOT IN SYSTEM MEMORY ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
ANITA requires a TID for access to the requested page.
Response
Specify TID/TSN if possible.
DMP1606
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1606 PAGE (&00) NOT ALLOCATED ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1607
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1607 PAGE (&00) HAS BEEN REQUESTED BUT NOT YET USED ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1608
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1608 PAGE (&00) HAS BEEN ELIMINATED BY REDUCE ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1609
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1609 PAGE (&00) NOT IN DUMP ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1610
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1610 ACCESS TO PAM PAGE (&00) FAILED ((&01))
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP1611
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1611 PAM PAGE (&00) NOT CONTAINED IN FILE
Meaning
The file consists of an odd number of PAM pages.
Access has been made to the page behind the last page.
DMP1612
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1612 DMS ERROR (&00) OCCURRED WHILE ACCESSING FILE ((&01))
Meaning
The error (&01) displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Enter HELP DMS(&00) to get more information about the DMS error.
Response
Check file.
DMP1613
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1613 ANITA ERROR ((&01)) OCCURRED WHILE READING PAGE (&00)
Meaning
The error reported by ANITA has not been realized by DAMP.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
The system service should be informed.
DMP1614
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1614 PAGE (&00) LIES OUTSIDE OF (&01) SECTION
DMP1615
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1615 (&00) SECTION IS EMPTY
DMP1616
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1616 (&00) SECTION IS NOT AVAILABLE
DMP1617
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1617 A TABLE FOR PAGE (&00) IS INCONSISTENT ((&01))
Meaning
Possible tables : page, segment, etc.
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1618
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1618 A TABLE FOR PAGE (&00) IS NOT ACCESSIBLE ((&01))
Meaning
Possible tables : page, segment, etc.
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1619
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1619 NO SYSTEM MEMORY SPECIFIED BY ALET ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1620
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1620 NO DATA SPACE AVAILABLE FOR SPECIFIED ALET ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1621
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1621 NO ADDRESS SPACE AVAILABLE FOR SPECIFIED SPID ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1622
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1622 DATA SPACE NOT IN DUMP ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1623
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1623 PAGE (&00) ALLOCATED BUT NOT IN DUMP ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1624
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1624 ADDRESSING MODE NOT POSSIBLE FOR PAGE (&00) ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1625
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1625 VIRTUAL PAGE (&00) NOT READABLE ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1626
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1626 ONLY VIRTUAL ADDRESSING POSSIBLE FOR PAGE (&00) ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1627
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1627 PAGE (&00) NOT IN SELECTED VM ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1628
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1628 PAGE (&00) OVERWRITTEN BY SLED ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1629
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1629 (&00)-SECTION WITH UNKNOWN INDEXSTRUCTURE ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1630
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1630 PAGE (&00) OUTSIDE THE RANGE OF THE INDEXSTRUCTURE ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1631
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1631 PAGE (&00) IS SECRET ((&01))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter /HELP-MSG DMP1600 to get more information about ANITA errors.
DMP1901
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1901 OLD DIAGNOSIS OBJECT COULD NOT BE CLOSED BY ANITA ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1902
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1902 ANITA NOT AVAILABLE ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP1903
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1903 INSUFFICIENT TEST PRIVILEGE FOR SYSTEM ACCESS ((&00))
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
Use the statement MODIFY-TEST-OPTIONS for increase of privilege.
DMP1904
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1904 NO VALID DUMP ((&00))
Meaning
The specified file has no dump file structure.
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
Use the statement OPEN-DIAGNOSIS-OBJECT <filename>(PAM).
DMP1905
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1905 (&00) STANDARD INFORMATION NOT AVAILABLE
Meaning
The dump cannot be handled as a BS2000 dump.
Response
Use the statement OPEN-DIAGNOSIS-OBJECT <filename>(PAM).
DMP1906
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1906 BS2000 VERSION CANNOT BE FOUND
Meaning
The dump cannot be handled as a BS2000 dump.
Response
Use the statement OPEN-DIAGNOSIS-OBJECT <filename>(PAM).
DMP1907
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1907 XVT ADDRESS CANNOT BE FOUND
Meaning
The dump cannot be handled as a BS2000 dump.
Response
Use the statement OPEN-DIAGNOSIS-OBJECT <filename>(PAM).
DMP1908
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1908 DUMP-INFORMATION INCOMPLETE
Meaning
An error was reported by the dump access method ANITA.
DMP1909
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1909 DUMP DATE/TIME NOT ACCESSIBLE
Meaning
Printed dump date/time is the default value.
DMP1910
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1910 SUBSYSTEM INFORMATION MISSING OR INCOMPLETE
Meaning
Subsystem information may be wrong.
DMP1911
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1911 INTERNAL ERROR WHEN CONSTRUCTING SUBSYSTEM LIST
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP1912
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1912 LIST OF ACTIVE TASKS CANNOT BE CONSTRUCTED
Meaning
No task-local information is available for this dump.
DMP1913
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1913 LIST OF ACTIVE TASKS IS NOT COMPLETE
Meaning
Task-local information is not available for some tasks.
DMP1914
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1914 MAP INFORMATION IS MISSING FOR SOME SUBSYSTEMS
Meaning
Information about some CSECTs (modules) is not available.
DMP1915
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1915 SUBSYSTEM MAP INFORMATION INCOMPLETE
Meaning
Information about some CSECTs (modules) is not available.
DMP1916
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1916 DUMMY MODULES ETCB-XXX INCOMPLETE
Meaning
For some tasks the TCB cannot be localized by the input ETCB-<itn>.
DMP1917
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1917 CPU DATA NOT AVAILABLE
Meaning
Access to CPU data is not possible.
DMP1918
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1918 CPU MNEMONIC CANNOT BE FOUND
Meaning
Access to CPU mnemonic data is not possible.
The message is displayed in case of SLEDs and Systemdumps whenever
DAMP is not able to evaluate the field EXVTCPU using the (normally)
dumped module NSIVINF, entry NSICONFB.
After displaying this message DAMP tries to evaluate the field
EXVTCPU by means of an own internal table.
DMP1919
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1919 LOADING OF SYMBOLS FROM ELEMENT (&00) IMPOSSIBLE
Meaning
The required symbols could not be loaded from the element (&00)
of the symbol library.
Especially, a corresponding LMS-element of LMS-Type X must exist in
the symbol library.
If there is a "/" in (&00) then it separates the LMS-name from the
LMS-version.
Response
Check the symbol library.
DMP1920
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1920 VALID SYMBOL LIBRARY (&00) NOT FOUND
Response
If you have not specified a symbol library then there may be
a problem of installation.
You can find further information in the help-window, chapter
"installation instructions".
DMP1921
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1921 DUMPED SYSTEM DID NOT REACH SYSTEM READY
Meaning
The dump was written before startup was completed.
DMP1922
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1922 THE SPECIFIED FILE IS EMPTY
DMP1923
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1923 DUMP IS SLED FROM (&00). ONLY ACCESS TO REAL ADDRESSES POSSIBLE
Meaning
The opened object is not a BS2000 dump. Therefore virtual addressing
is not available.
DMP1924
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1924 CDUMP INFORMATION IS AVAILABLE IN CDLOG SECTION
Meaning
CDUMP information from the interface $EVTLOG is available in the
CDLOG section.
Response
The CDLOG section can be displayed using the statement
SHOW-EDITED-INFORMATION INFORMATION=DUMPED-SYSTEM-FILE.
Then enter the name of the section ('CDLOG') in the window header.
DMP1925
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1925 INTERNAL ANITA ERROR (&00) OCCURRED WHILE OPENING DIAGNOSIS OBJECT
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1926
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1926 ANITA ERROR (&00) OCCURRED WHILE OPENING DIAGNOSIS OBJECT
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
Response
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1927
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1927 DMS ERROR (&00) OCCURRED DURING OPEN PROCESSING BY ANITA
Meaning
Enter /HELP-MSG-INFORMATION DMS(&00) for more information.
DMP1928
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1928 VERSION OF DIAGNOSIS OBJECT IS NOT SUPPORTED BY ANITA
Meaning
The given object has a version which is not yet or no longer
supported by ANITA. It is also possible that the given object
is not valid.
Response
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1929
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1929 INVALID DUMP FILE. FIRST PAGE DOES NOT CONTAIN AN INDEX0 BLOCK
Response
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1930
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1930 FILE CONTAINS NO VALID INDEX0 BLOCK
Meaning
The file was probably read from tape but is incomplete.
DMP1931
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1931 DUMP IS RAW SNAPSHOT. PLEASE CONVERT DUMP
Meaning
The SNAPSHOT dump file is of a version < V11.0 and could not be
converted by BS2000. Analysis by DAMP requires conversion of the dump.
Response
The dump may be converted using SODA.
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1932
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1932 DUMP FILE HAS INVALID FORMAT
Meaning
Dump file is a tape file or has block size (STD,n) with n>2.
Response
The dump file must be copied correctly to disk.
DMP1933
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1933 OBJECT CAN ONLY BE ACCESSED USING REAL ADDRESSES
Meaning
ANITA recognized that the object is not a BS2000 dump or
that address translation is not possible.
Response
Please contact your FUJITSU TECHNOLOGY SOLUTIONS service center for more
information.
DMP1934
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1934 SYMBOL 'EXVTFCV' NOT FOUND; OPEN-DIAGNOSIS-OBJECT ABORTED
Meaning
The diagnosis object cannot be opened because a required symbol
is missing.
Response
Check the symbol library and try again with a suitable symbol element.
DMP1935
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1935 DMS ERROR (&00) OCCURRED DURING OPEN PROCESSING OF A PAM FILE.
Meaning
Enter /HELP-MSG-INFORMATION DMS(&00) for more information.
DMP1936
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1936 DUMPFILE DOES NOT CONTAIN THE SPECIFIED VM.
Meaning
The dumpfile does not contain the chosen VM. Please choose other VM.
DMP1937
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1937 INCONSISTENT TABLES HAVE BEEN FOUND IN OBJECT.
Meaning
The VM could not be opened because there have been found inconsistent
data in some tables.
DMP1938
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1938 DUMPGENERATOR IS NOT KNOWN BY ANITA.
Meaning
ANITA does not know specified Dumpgenerator. This file can only be
opened as PAM-File.
DMP1939
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1939 DMS-ERROR DMS(&00) OCCURRED WHILE CLOSING LAST VM.
Meaning
Enter /HELP-MSG-INFORMATION DMS(&00) for more information.
DMP1940
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1940 VM IS NOT IN DUMP.
Meaning
You cannot access the chosen VM.
DMP1941
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1941 PREVIOUS SYSTEM IS NOT ACCESSIBLE.
Meaning
You can only access the dumped system.
DMP1942
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1942 MONITORSYSTEM IN DUMPFILE NOT ACCESSIBLE.
Meaning
You cannot access VM1.
DMP1943
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1943 SYMBOLS FOR MODUS INF ARE NOT CORRECT.
Meaning
Symbolic information used by Modus INF in the "Status-Fenster" is wrong
or missing.
DMP1944
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1944 DUMPFILE HAS BEEN CLOSED.
Meaning
The dumpfile has been closed because of the lack of some important
data necessary for an analysis.
DMP1945
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1945 BLS-ERROR OCCURED WHILE OPENING THE DIAGNOSIS OBJECT (&00).
Meaning
The diagnosis object could not be opened because of a BLS-error.
DMP1946
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1946 DUMP IS GENERATED BY CDUMP. ANALYZING AS SELFLOADER NOT ALLOWED.
Meaning
The diagnosis object will not be analyzed as Selfloader because it is
senseless.
DMP1947
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1947 INCOMPLETE DUMP INFO: (&00)
Meaning
Some pieces of information normally given by the access method ANITA
are missing.
In the message there is specified which pieces of information are
missing. These pieces are represented by the sum of the values
of all bits set separated for each stream of information.
OBJ: Elements missing in the output stream OBJINFO given by ANITA.
Meaning of the value of each bit set.
#80 (Bit07): Type of dump generator.
#40 (Bit06): Dumptitle.
#20 (Bit05): Version of dump generator.
#10 (Bit04): "Time Of Day"-register ( time of creating sledfile ).
#04 (Bit02): Product identification (PID) in a "sled of sled"file.
#02 (Bit01): Address of the NSDIO-area.
SYS: Elements missing in the output stream SYSINFO given by ANITA.
Meaning of the value of each bit set.
#8000 (Bit15): Version of the dumped BS2000.
#4000 (Bit14): Some information about CPU.
#2000 (Bit13): Bitmap of active CPUs.
#1000 (Bit12): Real memory size.
#0800 (Bit11): Extent of the paging area.
#0400 (Bit10): Product identification (PID).
#0200 (Bit09): Memory class limits. ( <= BS2000 V12.0 )
#0100 (Bit08): CPU on which the sledfile has been created.
#0080 (Bit07): HSA section address.
#0040 (Bit06): HSA section length.
#0020 (Bit05): Memory class limits. ( > BS2000 V12.1 )
VM2: Elements missing in the output stream VM2INFO given by ANITA.
Meaning of the value of each bit set.
#80 (Bit07): Product identification (PID) of a sledfile of a
complete VM2000 system.
VMI: Elements missing in the output stream VMINFO given by ANITA.
Meaning of the value of each bit set.
#80 (Bit07): VM index.
#40 (Bit06): VM indicator.
#20 (Bit05): Hostabsolute address a VM starts with.
#10 (Bit04): Length of this area.
#08 (Bit03): Hostabsolute page a VM starts with.
#04 (Bit02): Length of this area. ( in pages )
DMP1948
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1948 INCOMPLETE DUMP INFO: (&00), ESP. BS2000 VERSION.
Meaning
see DMP1947.
DMP1949
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1949 INCOMPLETE DUMP INFO: (&00), ESP. XVT ADDRESS.
Meaning
see DMP1947.
DMP1950
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1950 SYMBOLIC INFORMATION FOR INDEX0-BLOCK INCORRECT.
Meaning
DAMP has found incorrect symbolic information for the Main Index Block,
therefore the symbol element NSDST will not be loaded.
DMP1951
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1951 ANITA COULD NOT BE UNLOADED ((&00))
Meaning
Error when calling ANDISCO.
DMP1952
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1952 ANITA COULD NOT BE UNLOADED
DMP1953
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1953 VERSION OF DIAGNOSIS OBJECT ((&00)) IS NOT SUPPORTED BY DAMP
Response
USE OLDER VERSION OF DAMP IF AVAILABLE
DMP1954
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP1954 ANITA VERSION NOT COMPATIBLE WITH DAMP VERSION, (&00) EXPECTED
Meaning
DAMP needs the correct ANITA version (see message).
Response
Select correct ANITA library with START-OPTION-DIALOG
DMP2001
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2001 SYMBOLS OF THE VIRTUAL MEMORY MANAGEMENT NOT FOUND
Meaning
DAMP could not get information about virtual memory attributes.
The DSECT EPDR (and some other) are needed to evaluate the
tables of the virtual-memory-management.
Response
Check the standard symbol element BS2000/xxx of the symbol library.
DMP2101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2101 MSG FROM (&00): ACCESS TO (&01) FAILED
Meaning
The module (&00) failed to access the field (&01).
Response
Depends on the messages given additionally.
DMP2102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2102 ANITA ERROR (&00) WHILE CONSTRUCTING SUBSYSTEM LIST
Meaning
Subsystem and CSECT information is not available for this dump.
The error (&00) displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP2103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2103 ERROR WHILE EVALUATING THE DSSM-SAVE-TABLE ( ASINUS ).
Meaning
The DSSM-table will be evaluated like in BS2000 <= 112.
Response
Check whether the symbols ASAVDSSM, ASIMDBH and ASIPUCON are available
DMP2104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2104 THE HEADER OF THE DSSM-SAVE-TABLE CONTAINS ERRONEOUS VALUES.
Meaning
The table header has been overwritten.
DMP2105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2105 AN OVERFLOW/UNDERFLOW OCCURRED DURING THE SESSION.
Meaning
The table entries do not show exactly the loading state of the
subsystems.
DMP2106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2106 (&00) : ERROR WHILE EVALUATING (&01).
Meaning
At the specified address the expected/correct data of the specified
structure have not been found.
DMP2301
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2301 TASK DATA INCOMPLETE FOR TID (&00)
Meaning
Some data from the TCB or PCB of the task cannot be accessed.
DMP2302
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2302 INCONSISTENCY IN THE TCB OF THE DUMP TASK
Meaning
This is a fatal error which prevents the dump from being processed
correctly.
DMP2303
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2303 INVALID TCB ADDRESS FOR TID (&00) IN THE TLT
DMP2304
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2304 TLT PARTIALLY INACCESSIBLE
DMP2305
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2305 TLT NOT ACCESSIBLE
Meaning
This is a fatal error which prevents the dump from being processed
correctly.
DMP2306
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2306 TID (&00) IN TCB DOES NOT MATCH INDEX (&01) IN TLT
Response
The data for the task may be accessed via a default TID,
which is X'10000' plus the index.
DMP2307
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2307 TID (&00) HAS BEEN SELECTED AS CURRENT TID
DMP2401
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2401 SYMBOL (&00) NOT FOUND
Response
Assign correct symbol library.
DMP2402
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2402 ANITA ACCESS ERROR (&00) DURING STACK OUTPUT
Meaning
The error (&00) displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP2403
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2403 (&01) (&00)S FOUND. ONLY 1 - (&02), (&03) - (&01) HAVE BEEN SELECTED
Meaning
There are too many PCBs / SPL stacks.
Only the listed ones are processed by DAMP.
DMP2404
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2404 MORE THAN (&01) (&00)S FOUND. 1 - (&02), (&03) - (&01) SELECTED
Meaning
There are too many PCBs / SPL stacks.
Only the listed ones are processed by DAMP.
DMP2405
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2405 POINTER TO (&00) NOT WORD-ALIGNED
Meaning
The PCB / SPL stack pointer is expected to be word-aligned.
Stack selection is aborted.
DMP2406
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2406 CYCLE IN (&00) CHAIN FOUND
Meaning
The last PCB / SPL stack pointer has been found twice.
Stack selection is aborted.
DMP2407
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2407 PCB ADDRESS IN USER MEMORY
Meaning
The last PCB link points into user memory.
Stack selection is aborted.
DMP2451
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2451 REAL ADDRESSES FOR TRACE-TABLE-ENTRIES ASSUMED
Meaning
Although the dump-object allows virtual addressing, it is not possible
to interpret the addresses for the trace-table-entries virtually.
This can be normal for dump-objects from startup.
Therefore DAMP assumes that these addresses are to be interpreted
virtually.
For the display of the original contents of a trace-entry by marking
the SEQ-number DAMP switches in the destination window automatically to
the real addressing mode.
DMP2501
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2501 MODULE (&00) WITH INSTRUCTION SET TABLE COULD NOT BE LOADED
Meaning
The LINK macro returned an error code. Message DMP2504 gives
the error code and the library name.
DMP2502
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2502 SVC TABLE (&00) COULD NOT BE LOADED
Meaning
The LINK macro returned an error code. Message DMP2504 gives
the error code and the library name.
DMP2503
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2503 INTERRUPT WEIGHT TABLE (&00) COULD NOT BE LOADED
Meaning
The LINK macro returned an error code. Message DMP2504 gives
the error code and the library name.
DMP2504
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2504 LINK ERROR : (&00). LIBRARY : (&01)
Meaning
This message always follows messages DMP2501, 2, 3 and gives
more information about the error cause.
DMP2701
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2701 HELP FILE AVAILABLE IN GERMAN ONLY
DMP2702
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2702 ENGLISH SPEAKING USERS SEE MANUAL 'DIAGNOSTICS HANDBOOK'
DMP2801
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2801 NO DIAGNOSIS OBJECT OPEN
Response
Enter an OPEN-DIAGNOSIS-OBJECT statement first.
DMP2802
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2802 SIMULTANEOUS NAME AND ADDRESS SPECIFICATION IS ILLEGAL
Meaning
The simultaneous input of name and address is only allowed for the
manual positioning of control blocks.
DMP2803
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2803 MODULE OR CONTROL BLOCK (&00) NOT FOUND
DMP2804
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2804 MODULE (&00) NOT FOUND
DMP2805
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2805 CONTROL BLOCK (&00) NOT FOUND
DMP2806
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2806 SYMBOL (&00) FROM (&01) IS NOT ACCESSIBLE
Meaning
The given symbol is an element of a substructure. These can only be
accessed if the substructure is expanded and visible.
Response
First enter the name of the substructure containing (&00), then
expand the substructure.
DMP2807
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2807 START ADDRESS OF CONTROL BLOCK INVALID
Meaning
With the given control block field, the start address of the
control block would have to lie before page P-000001.
DMP2808
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2808 WRONG PAGE NUMBER
Meaning
Page numbers have to be specified as "P-nnnnnn".
DMP2809
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2809 USE ADDRESS SPACE SELECTOR FOR SPECIAL MEMORY
Meaning
Since DAMP V3.1 special memory is no longer selected with the names
'*REAL', '*SCRATPD' and '*HSA'. Instead, the address space selectors
RM, PSS and HSA should be used.
DMP2810
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2810 PAM PAGE NUMBER OVERFLOW
Meaning
The given input results in a PAM page number that is out of the
range that DAMP can handle.
DMP2811
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2811 ADDRESS NOT IN HSA. ADDRESS CORRECTED
Meaning
The selected address is smaller than the start address of the hardware
system area. The address is set to the start address of the HSA.
DMP2812
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2812 PAGE (&00) NOT IN HSA
Meaning
The specified page of the hardware system area cannot be accessed.
The HSA is available, but the page lies behind the start of the HSA.
DMP2813
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2813 SCROLLING WITH LINES DECLARATION NOT YET POSSIBLE FOR A DUMP WINDOW
Meaning
+n or -n has not yet been implemented for a dump window.
Note: +n and -n always refer to the last modified window.
DMP2814
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2814 DAMP DIAGNOSIS SUPPORT VERSION (&00) LOADED
DMP2815
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP2815 SEARCH FOR CSECT RESTRICTED TO SUBSYSTEM (&00).
Meaning
The DAMP statement SEARCH-IN-SUBSYSTEM has restricted the
search for CSECT to a subsystem.
It is possible that the CSECT is contained in another subsystem.
Response
The restriction on the CSECT search can be removed with the DAMP
statement SEARCH-IN-SUBSYSTEM SUBSYSTEM=*ALL .
DMP3001
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3001 NO ACTIVE TASK FOUND FOR (&00) REQUEST
DMP3002
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3002 (&00) NUMBER (&01) OUT OF RANGE
DMP3003
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3003 NO (&00) FOUND FOR TID (&01)
Meaning
No PCB / SPL stack is assigned to the specified task.
DMP3004
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3004 NO REGISTER INFORMATION FOUND
Meaning
The stack information is available, but the register area is not
accessible.
DMP3005
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3005 INCONSISTENT (&00) REQUEST
Meaning
The LNK field has been marked together with some input.
The request has been ignored.
Response
Enter an unambiguous request.
DMP3006
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3006 (&00) NUMBER "(&01)" INVALID
Meaning
An invalid PCB / SPL stack number has been given.
DMP3007
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3007 SUCCESSION SEQUENCE UNKNOWN. SCROLL REQUEST HAS BEEN IGNORED
Meaning
The successor or predecessor stack is unknown.
DMP3008
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3008 NO INFORMATION SAVED BY DAMP FOR (&00) NUMBER (&01)
Meaning
There are too many PCBs / SPL stacks and the requested stack has
not been selected by DAMP.
Response
Try to find the stack by marking LNK entries.
DMP3009
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3009 NO (&00) FOUND
Meaning
A LNK entry has been marked, but no PCB / SPL stack could be found.
DMP3010
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3010 ACCESS REGISTERS NOT ACCESSIBLE FOR THIS STACK
Meaning
The process to which this stack belongs was running in AR mode,
but the access registers could not be read.
DMP3011
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3011 HIGHEST AVAILABLE (&00) NUMBER "(&01)" DISPLAYED
Meaning
A PCB/SPL stack number higher than the maximum available has been
requested.
The highest available PCB/SPL stack will be displayed.
Response
None.
DMP3101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3101 CONTRADICTORY INPUT IGNORED
Meaning
TID/TSN input and marked TID are not the same.
DMP3102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3102 INPUT CONTRADICTORY. TID/TSN INPUT IGNORED
Meaning
TID/TSN input and label input are contradictory; first input ignored.
DMP3103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3103 STACK INFORMATION NOT AVAILABLE
Meaning
For the current task, no PCBs / SPL stacks could be found.
DMP3104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3104 STACK-INFORMATION INCOMPLETE
Meaning
The PCB / SPL stack chain is not complete.
DMP3105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3105 INVALID TASK SPECIFICATION WHEN ACCESSING PCB'S OR SPL STACKS
Meaning
The specified task is not (or no longer) active.
DMP3107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3107 DIAGNOSIS OBJECT DOES NOT CONTAIN STATUS INFORMATION
Meaning
The diagnosis object is probably not a BS2000 dump/system.
DMP3108
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3108 NO INFORMATION FOR THE MODUS INF
Meaning
Dummy message.
DMP3109
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3109 NO PCB'S EXIST
DMP3110
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3110 NO SPL STACKS EXIST
DMP3111
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3111 NO TASKS EXIST
DMP3301
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3301 TERMINATE DAMP? REPLY (Y=YES; N=NO)
Meaning
You pressed the <K1> key.
Response
Answer 'Y' if you want to terminate DAMP,
Answer 'N' if you want to continue DAMP.
DMP3302
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3302 WINDOW 3 CAN ONLY BE USED FOR BS2000 DUMPS
Meaning
A diagnosis object has been opened as a PAM file or self-loading dump.
In this case, window 3 cannot be used.
DMP3303
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3303 SCROLLING WITH LINES DECLARATION NOT ALLOWED FOR WINDOW (&00)
Meaning
+n or -n is not allowed for the specified window.
Note: +n and -n always refer to the last modified window.
DMP3304
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3304 F(&00) KEY FUNCTION HAS BEEN IGNORED
Meaning
+n or -n has been given together with a <F1>/<F3> key.
An inconsistency is possible, +n/-n is executed.
DMP3305
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3305 TASK WITH (&00) (&01) NOT ACTIVE
Meaning
An ITN (maximum: 4 characters) or a complete TID has been given in
the TID field, but no active task could be found for it.
DMP3306
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3306 TCB FOR (&00) (&01) NOT FOUND
Meaning
An ITN (maximum: 4 characters) or a complete TID has been given in the
TID field, or a TSN has been given in the TSN field, but no TCB could be
found for it.
DMP3307
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3307 TID (&00) NOT FOUND, (&01) ASSUMED
Meaning
A complete TID was given in the TID field. This TID could not be
found. Another TID has been selected by DAMP.
DMP3308
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3308 TSN (&00) AND TID (&01) DO NOT MATCH; TSN (&02) ASSUMED
Meaning
Contradictory entries were made in the fields TID and TSN. The
task identified by the TID has been selected.
DMP3309
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3309 TSN SEARCH MAY TAKE A LONG TIME. CONTINUE WITH <F3>
Meaning
A TSN has been given, but the task list is not yet complete.
The TSN search may take a lot of time.
Response
Press <F3> key to continue the TSN search.
DMP3310
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3310 INVALID ADDRESS SPACE SELECTOR SPECIFIED
Meaning
The given address space selector is not valid. Please select
one of the following values :
TID : User address space defined by TID.
TSN : User address space defined by TSN.
SYS : System address space.
ALT : Data space defined by ALET and TID.
SPI : Data space defined by SPID.
RM : Real memory.
ABS : Absolute memory. ( with VM2000 )
PSS : Processor Saved Status defined by CPU number.
HSA : Hardware System Area.
DMP3311
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3311 SELECTED ADDRESS SPACE NOT AVAILABLE IN CURRENT OBJECT
Meaning
The given address space is ABS, RM, PSS or HSA
and the current object is not
a SLED file, or the given address space is a data space and the object
is not from BS2000 V11.0 or higher.
DMP3312
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3312 INVALID CPU NUMBER OR CPU NOT AVAILABLE
DMP3313
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3313 INPUT FOR (&00) IS NOT HEXADECIMAL
DMP3314
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3314 INPUT FOR TSN TOO LONG. INPUT TRUNCATED
DMP3315
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3315 GIVEN SPID HAS INCORRECT LENGTH
Meaning
A SPID is 8 bytes long (16 hexadecimal characters) and the input string
has another length.
Response
Please enter complete SPID because there is no default mechanism for
incomplete SPIDs.
DMP3316
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3316 NO DEFAULT MECHANISM FOR SPID'S
Meaning
When SPID is entered as address space selector, a valid SPID must be
entered as address space identifier because there is no default
mechanism for SPIDs as there is for e.g. TIDs.
Response
Please enter a SPID.
DMP3317
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3317 NO ADDRESS SPACE SELECTION WHEN NO OBJECT IS OPENED
DMP3318
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3318 NO PROCEDURE FOUND FOR READ_WINDOW
Meaning
Input transfer to a PRODAMP procedure has been requested by P13.
But there is no procedure which has been interrupted by READ_WINDOW.
DMP3319
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3319 UNEXPECTED LINK ERROR DURING RESUME OF PRODAMP PROCEDURE
Meaning
Input transfer to a PRODAMP procedure has been requested by P13.
But resume of execution failed because of a LINK error.
DMP3320
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3320 NO ACTIVE TASK FOUND
Meaning
The task list created by DAMP is empty.
Only real addressing is possible.
DMP3321
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3321 INPUT TOO LONG
Meaning
The input string is too long.
DMP3322
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3322 INPUT OF TID/TSN NOT ALLOWED
Meaning
The input of TID or TSN is prohibited at the moment.
DMP3323
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3323 ONLINE HELP NOT AVAILABLE FOR THIS FIELD
Meaning
There is no help information associated with this field.
Response
Please inform system administrator.
DMP3401
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3401 STATEMENT NOT YET AVAILABLE
DMP3403
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3403 STATEMENT IS FORBIDDEN IN INTERACTIVE MODE
Meaning
The statements ADD-LIST-OBJECTS, REMOVE-LIST-OBJECTS and PRINT-LIST
may only be used in batch or procedure mode.
Response
Use the LIST window to make your selections for list output.
DMP3404
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3404 STATEMENT IS FORBIDDEN IN PROCEDURE MODE
Meaning
The statement HOLD-PROGRAM must not be issued in procedure mode.
Response
Press K2, and return after command with RESUME-PROGRAM.
DMP3405
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3405 NO DCAM CONNECTION ACTIVE
Meaning
The entered statement is only allowed if a DCAM connection exists
for DAMP.
DMP3408
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3408 INVALID REGISTER NUMBER FOR (&00)
DMP3409
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3409 ENTER "USING <MODNAME> , <DSECT> , <REG>"
Meaning
The message displays the correct format of the USING statement.
DMP3410
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3410 ENTER "USING <DSECT> , AMODE, <ADDR-MODE>"
Meaning
The message displays the correct format of the USING statement.
DMP3411
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3411 ENTER "USING <MODNAME> + <RELADD> , <REG>"
Meaning
The message displays the correct format of the USING statement.
DMP3412
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3412 DCAM CONNECTION ALREADY ACTIVE
Meaning
The statements ACCEPT-REMOTE-DIAGNOSIS, SELECT-DIAGNOSIS-TERMINAL and
START-REMOTE-DIAGNOSIS are rejected if a DCAM connection has already
been established.
DMP3418
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3418 (&00) LIBRARY IS (&01)
Meaning
The name of the current library for PRODAMP sources/objects
is displayed.
DMP3419
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3419 STATEMENT MUST NOT BE ENTERED VIA PRODAMP
Meaning
The current statement must not be called via the COMMAND interface of
PRODAMP. For details see the DAMP manual.
Response
Correct your PRODAMP source, recompile and start again.
DMP3420
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3420 TELESERVICE IS NOT SUPPORTED AS OF DAMP V4.8
DMP3421
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3421 CURRENT EDT WORK FILE NOT EMPTY
Meaning
The REDUCE function uses the current EDT work file for reading standard
options and for writing the current options after the statement
REDUCE-DUMPFILE has been given. Therefore the current EDT work file
must be empty.
DMP3422
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3422 (&00) IS NOT A VALID DAMP STATEMENT
DMP3423
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3423 PARTIALLY QUALIFIED FILE NAME MATCHES SEVERAL FILES
Response
Repeat statement with a unique file name.
DMP3424
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3424 ERROR (&00) RETURNED FROM (&01)
DMP3425
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3425 WINDOW NUMBER HAS BEEN SPECIFIED TWICE
Response
Correct operands by eliminating one window number.
DMP3426
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3426 SYMBOL (&00) NOT FOUND
Response
Correct symbol name or enter ADD-SYMBOLS statement with a
symbol file containing the requested symbol.
DMP3427
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3427 SYMBOL (&00) IS NOT A DSECT NAME
Meaning
The requested symbol name has been found, but it is not the
name of a DSECT.
DMP3428
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3428 INVALID ADDRESSING MODE IN (&00) STATEMENT
Meaning
The given addressing mode is not 24 nor 31.
DMP3429
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3429 MODULE (&00) NOT FOUND
DMP3430
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3430 "(&00)" IS NOT A VALID STATEMENT
DMP3431
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3431 SPECIFIED NAME NOT A VALID DAMP STATEMENT
DMP3432
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3432 (&00) IS NOT A VALID BS2000 COMMAND
Meaning
The user entered an unknown statement preceded by a name.
DMP3433
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3433 ENTER "USING INSTR=SETN"
Meaning
The message displays the correct syntax of the USING statement.
DMP3434
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3434 LINK ERROR ((&00)) WHILE LOADING (&01) FROM (&02)
Response
Check library, or use the LOAD-MODULE statement to load the module
from another library.
DMP3435
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3435 ABNORMAL TERMINATION OF EXTERNAL PROCEDURE (&00)
Meaning
The called external procedure was terminated without returning
to the DAMP caller procedure. Probably an error occurred.
DMP3436
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3436 SYMBOL INFORMATION IS ALREADY LOADED
DMP3437
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3437 INVALID SYMBOL ELEMENT (&00)((&01)) IN LIBRARY (&02)
Meaning
The given symbol element does not exist or has an invalid format.
DMP3438
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3438 SYMBOL LIBRARY (&00) NOT FOUND
DMP3439
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3439 REDUCE FUNCTION IS ALREADY ATTACHED TO ANOTHER WINDOW
DMP3440
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3440 STATEMENT 'START-DUMP-REDUCTION' MUST BE GIVEN FIRST
Meaning
Before the statements PROTECT-DUMP-AREAS, REMOVE-DUMP-AREAS or
REDUCE-DUMPFILE can be given, the name of the new file has to be
specified with the statement START-DUMP-REDUCTION.
DMP3441
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3441 EXTERNAL PROCEDURE (&00) CANCELED BY USER
DMP3442
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3442 THERE IS NO FUNCTION TO BE CANCELLED. INPUT IGNORED
Meaning
The user wanted to cancel the current function, but there is
no current DAMP function that could be cancelled.
DMP3443
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3443 DAMP (&00) AT (&01) CALLED BY:
Meaning
Output of the call chain after /SEND-MSG ... 'FUNCTION=BREAK'.
DMP3444
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3444 (&00) = (&01) ((&02))
Meaning
Output of the call chain after /SEND-MSG ... 'FUNCTION=BREAK'.
DMP3445
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3445 CSTAT FAILED FOR PAGE (&00)
Response
Check if you specified the right page.
DMP3446
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3446 LINK ERROR WHILE LOADING PACKAGE (&00) FROM (&01)
Meaning
The LINK macro reported an error during loading of the code/data
module for the given package.
Response
Check library, or use the LOAD-MODULE statement to load both modules
from another library.
DMP3447
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3447 INITIALIZATION OR TERMINATION ROUTINE MISSING IN PACKAGE (&00)
Meaning
In the loaded package, the initialization or termination routine
is missing.
DMP3448
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3448 '(&00)' ROUTINE IN PACKAGE (&01) NOT FOUND
Meaning
The specified package is supposed to contain a routine with the given
name.
Response
Check package or library.
DMP3449
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3449 CURRENT EDT COMMAND SYMBOL IS '(&00)'
Meaning
The user left EDT with HALT @, which leads to this message.
DMP3450
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3450 REDUCE CAN ONLY BE USED FOR SYSTEM DUMPS AND SLEDS
DMP3451
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3451 DIAGNOSIS OBJECT WITH (&00) HSI, INSTR-SET (&01) HAS BEEN LOADED
Meaning
Informative message after MODIFY-LAYOUT INSTRUCTION-SET=*STD.
DMP3452
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3452 CONNECTION TO REMOTE SYSTEM NOT POSSIBLE WHEN DUMP OPENED
DMP3453
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3453 'REPEAT-SESSION' IS NOT ALLOWED WHEN DCAM CONNECTION IS ACTIVE
DMP3454
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3454 WINDOW NUMBER MUST BE SPECIFIED FOR STORAGE-EDIT
DMP3455
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3455 SYSFILE COMMAND FAILED. PLEASE CHECK STATEMENT FILE
Meaning
To process the START-STATEMENT-SEQUENCE command, SYSDTA was redirected
to the given file using a SYSFILE command. This SYSFILE command however
was not successful.
Response
Check statement file and reenter command.
DMP3456
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3456 NO FREE WINDOW. PLEASE SPECIFY WINDOW NUMBER
DMP3457
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3457 REDUCE FUNCTION IS NOT SUPPORTED AS OF DAMP V4.7
DMP3458
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3458 'START-LIST-GENERATION' STATEMENT MUST BE GIVEN FIRST
Meaning
Before the statements ADD-LIST-OBJECTS, REMOVE-LIST-OBJECTS or PRINT-LIST
can be given, the diagnosis object has to be specified with the statement
START-LIST-GENERATION.
DMP3459
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3459 NO PRODAMP OBJECT FOUND FOR (&00)
DMP3460
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3460 NO INTERRUPTED PRODAMP OBJECT FOUND
DMP3461
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3461 NO PRODAMP OBJECT ASSIGNED TO WINDOW (&00)
DMP3462
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3462 EDT CANNOT BE USED IF REMOTE DAMP PARTNER IS A BATCH TASK
DMP3463
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3463 STATEMENT '(&00)' MUST NOT BE USED IN BATCH MODE
DMP3464
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3464 GIVEN SECURITY LEVEL MAKES NO SENSE IN BATCH MODE
Meaning
The user gave SECURITY-LEVEL=LOGGED-DIALOG or ACK-DIALOG
in batch mode.
DMP3465
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3465 SECURITY LEVEL CHANGED FROM (&00) TO (&01)
DMP3466
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3466 GIVEN BS2000 COMMAND IS NOT ALLOWED IN REMOTE DIAGNOSIS MODE
Meaning
For remote diagnosis, only the following BS2000 commands are allowed:
CHANGE-FILE-LINK, REMOVE-FILE-LINK, HELP-MSG-INFORMATION,
MODIFY-JOB-SWITCHES and PRINT-FILE.
DMP3467
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3467 EXECUTION OF (&00) ABORTED BECAUSE OF ERROR
Meaning
The given DAMP statement could not be executed properly.
More information is given in preceding messages.
DMP3468
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3468 DMS ERROR (&00) ON FILE MACRO FOR CURRENT DUMP FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP3469
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3469 ASSIGNMENT OF WINDOW (&00) CANNOT BE CHANGED AT THE MOMENT
Meaning
The specified window has been requested for a new function.
But it is not possible to change the current function.
This would cause inconsistencies for the window administration.
DMP3470
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3470 NO MODIFICATION FOUND
Meaning
The modification to be erased does not exist, or, if
REMOVE-MODIFICATION ALL was specified, no modification exists at all.
DMP3471
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3471 COMMAND NOT ALLOWED IF MEDIUM=SYSTEM
Meaning
The command is not allowed if the object to be diagnosed is the system.
DMP3472
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3472 ACCESS TO SDF FILE (&00) FAILED
DMP3473
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3473 DAMP NOT AVAILABLE IN SDF SYNTAX FILE
Meaning
The assigned SDF syntax file does not contain entries for DAMP.
Please check if command MOD-SDF *DEACT has been given.
DMP3474
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3474 SDF RETURN CODE (&00) NOT PROCESSED BY DAMP
Meaning
SDF returned the specified error,
but DAMP has not performed a detailed error analysis.
Response
Contact FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP3475
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3475 SDF DIALOG CANCELLED OR REJECTED
Meaning
First case : Normal termination of SDF dialog with K1/F1/*CANCEL.
Second case : Question mark on the wrong place or else user error.
Response
Contact FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP3476
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP3476 ADDRESS OR ADDRESSING MODE NOT REASONABLE
Meaning
Only ADDRESS <= 2047 { within PAM page } valid for PAM files
Response
Enter again correct value.
DMP3477
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3477 LOGGING CAN NOT BE DEACTIVATED BY TELESERVICE-ANALYZER
DMP3478
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3478 COMMAND NOT ALLOWED IF OBJECT IS A PAM-FILE OR HAS NOT BEEN OPENED
DMP3479
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3479 SPECIFIED SUBSYSTEM SENSELESS IN OPENED OBJECT
DMP3480
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3480 SUBSYSTEM (&00) VERSION (&01) NOT FOUND
DMP3481
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3481 CSECT (&00) IN SUBSYSTEM (&01) VERSION (&02) ALREADY EXISTING
DMP3482
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3482 CSECT (&00) IN SUBSYSTEM (&01) VERSION (&02) NOT FOUND
DMP3483
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3483 CURRENT LOGGING-FILE CAN NOT BE PROCESSED
DMP3484
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3484 FILE (&00) CREATED
DMP3485
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3485 THE COMMAND IS SENSELESS AS LONG AS NO DIAGNOSIS OBJECT HAS BEEN OPENED
DMP3486
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3486 SUBSYSTEM : (&00)
Meaning
The subsystem specified in a previous SEARCH-IN-SUBSYSTEM command
will be output.
DMP3487
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3487 THE VALUE OF (&00) IS NOT IN VALID RANGE OR HAS NOT BEEN SPECIFIED
Meaning
One Operand of one of the commands xxx-VIRTUAL-MODIFICATION or
xxx-CSECT-INFORMATION contains a invalid value.
DMP3488
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3488 REDUCE IS NOT SUPPORTED FOR THE CURRENT DUMP OBJECT
Meaning
Reduce is not yet supported for the following dumps :
- Dumps from RISC machines
- System dumps from systems with BS2000 version >= 11.2
DMP3489
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3489 NO SUITABLE DIAGNOSIS OBJECT OPENED
Meaning
There is no or the wrong diagnosis object opened.
DMP3490
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3490 COMMAND IS TOO LONG FOR DAMP
Meaning
Maximum length are 250 characters.
DMP3491
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3491 NO SUBSYSTEM WITH CONTEXT (&00) FOUND
DMP3492
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3492 REDUCE-VM2000-DUMPFILE CAN ONLY BE USED FOR VM2000-SLEDS
Response
Use START-DUMP-REDUCTION for other dumpfiles.
DMP3493
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3493 NO VM SELECTED
Meaning
REDUCE-VM2000-DUMPFILE can only run with selected VM.
Response
Select VM and repeat command.
DMP3494
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3494 WINDOWS 10 TO 20 ARE RESERVED. SEE WINDOW 0 FOR AN OVERVIEW.
Meaning
Windows 10-20 cannot be assigned.
Response
Please use windows 4 to 9 resp. 21-99.
DMP3496
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3496 STATEMENT ONLY ALLOWED IN IA64 CONTEXT.
DMP3497
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3497 NO UNWINDING POSSIBLE.
DMP3498
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3498 WTAB ADDRESS MUST NOT BE SPECIFIED FOR A X86 SERVER.
DMP3499
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3499 BS2000 CALLER ADDRESS OF FW ROUTINE: (&00)
DMP3501
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3501 DAMP VERSION (&00) INTERRUPTED
Meaning
The user pressed the <K2> key and thus caused a break for DAMP.
Response
Resume the program or enter an /INTR command.
DMP3502
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3502 FILE (&00) CLOSED
Meaning
Message of the termination procedure during closing of files.
DMP3503
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3503 FILE (&00) COULD NOT BE CLOSED
Meaning
Message of the termination procedure during closing of files.
DMP3504
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3504 DUMP FILE (&00) CLOSED
Meaning
Message of the termination procedure during closing of files.
DMP3505
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3505 ANITA ERROR (&00) WHEN CLOSING DUMP FILE (&01)
Meaning
Message of the termination procedure during closing of files.
DMP3506
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3506 TERM OCCURRED IN EXTERNAL PROCEDURE
Meaning
A procedure called with RUN tried to terminate DAMP.
The TERM is ignored, the external procedure is canceled.
DMP3507
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3507 DAMP VERSION (&00) TERMINATED NORMALLY
DMP3508
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3508 ABNORMAL TERMINATION OF DAMP VERSION (&00) WITH REASON (&01)
Meaning
DAMP terminated abnormally for one of the following reasons:
88=connection lost, 8C=CANCEL or LOGOFF, 94=hardware error
A8=CPU error, 90=TERMD, 98=EXEC or LOAD.
DMP3509
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3509 PLEASE SEND DUMP TO FUJITSU TECHNOLOGY SOLUTIONS SERVICE CENTER
Meaning
A user dump has been created for diagnostic purposes.
DMP3510
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3510 DAMP VERSION (&00) HAS NOT BEEN LOADED
DMP3511
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3511 DAMP TERMINATION BECAUSE OF FAILED MEMORY ALLOCATION
Meaning
This is the normal behaviour for the case that the
ADDRESS-SPACE-LIMIT for the userid has been set too low.
Response
DAMP needs ADDRESS-SPACE-LIMIT >= 4 MB to work correctly.
DMP3601
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3601 TERMINAL I/O ERROR, INPUT MUST BE REPEATED
Response
Repeat input.
DMP3602
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3602 TIAM ERROR OCCURRED REPEATEDLY
Meaning
DAMP will be terminated because of an unrecoverable error.
DMP3603
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP3603 COPYRIGHT (C) FUJITSU TECHNOLOGY SOLUTIONS, (&00). ALL RIGHTS RESERVED
DMP4001
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4001 VIRTUAL EDT FILE (&00) NOT EMPTY
Meaning
A PRODAMP object was to be transferred to the specified EDT file
( mode = "Edt" ) for decoding, and this file is not empty.
Response
Clear EDT file or choose another one via DAMP statement EDT.
DMP4002
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4002 NO PRODAMP OBJECT FOR (&00) FOUND IN LIBRARY
Meaning
The current PRODAMP object library does not contain the requested
object.
Response
Assign the correct PRODAMP library via ASSIGN-PRODAMP-LIBRARIES.
DMP4003
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4003 NO PRODAMP OBJECT DATA FOR (&00) FOUND IN LIBRARY
Meaning
The current PRODAMP object library contains an element for the
requested object without any data.
Response
Check your PRODAMP library.
DMP4004
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4004 LIBRARY ACCESS ERROR (&00) WHILE READING PRODAMP OBJECT
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
Response
Check your PRODAMP library.
DMP4005
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4005 PLAM ERROR (&00) WHILE READING PRODAMP OBJECT
Meaning
The specified PLAM error occurred during library access.
Response
Check your PRODAMP library.
DMP4006
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4006 REQM ERROR WHILE READING PRODAMP OBJECT
DMP4007
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4007 PRODAMP (READ): ERROR PLA(&00): ELE=(&01), LIB=(&02)
Meaning
The specified PLAM error (&00) occurred during library access
(element = (&01), library = (&02)).
Further information: /HELP-MSG PLA(&00)
Response
Check your PRODAMP library.
DMP4008
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4008 PRODAMP (READ): ERROR PLA(&00) WITH INSERT (&01)
Meaning
The specified PLAM error (&00) occurred during library access.
Further information: /HELP-MSG PLA(&00)
Response
Check your PRODAMP library.
DMP4009
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4009 PLAM-ERROR WHILE ACCESS TO ELE=(&00), LIB=(&01)
Meaning
PLAM error occurred during library access (element = (&00),
library = (&01)).
Response
Check your PRODAMP library.
DMP4101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4101 PRODAMP VERSION (&00) LOADED
Meaning
The DAMP programming system PRODAMP has been loaded.
DMP4102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4102 INVALID PROCESSING MODE (&00). WILL BE REPLACED BY DSP=DISPLAY
Response
Reenter correct input if desired.
DMP4103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4103 INVALID PROCEDURE NAME
Meaning
The name entered is not a valid PRODAMP procedure name.
Response
Enter correct procedure name.
DMP4104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4104 INVALID PROCEDURE VERSION
Meaning
The version entered is not a valid PRODAMP procedure version.
Response
Enter correct procedure version.
DMP4105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4105 NO ADDITIONAL TEXT LINE AVAILABLE
Meaning
The PRODAMP window has a length of 2 and the user attempted to
scroll beyond the first unused text line.
DMP4106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4106 WARNING: PROCEDURE NAME HAS BEEN TRUNCATED
Meaning
A PRODAMP procedure name with an illegal length has been
transferred by @HALT from EDT to a PRODAMP window.
This name has been shortened to the maximal legal length.
DMP4107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4107 VIRTUAL EDT FILE (&00) NOT EMPTY
Meaning
A PRODAMP procedure was to be transferred to the specified EDT
file ( mode = "Edt" ), and this file is not empty.
Response
Clear EDT file or choose another one via DAMP statement EDT.
DMP4108
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4108 VIRTUAL EDT FILE EMPTY. NO TEXT LINE RETURNED
Meaning
A PRODAMP procedure has been handled with EDT ( mode = "Edt" )
and an empty EDT file was returned to the PRODAMP window.
DMP4109
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4109 PRODAMP LIBRARY ACCESS COMPLETED
Meaning
No error occurred during access to the PRODAMP library.
DMP4110
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4110 PRODAMP LIBRARY ACCESS ERROR (&00)
Meaning
The specified DMS error occurred during access to the current
PRODAMP source/object library.
Response
Check your library.
DMP4111
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4111 PLAM ERROR (&00)
Meaning
The specified PLAM error occurred during access to the current
PRODAMP source/object library.
Response
Check your library, but a DAMP error is also possible.
DMP4112
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4112 NO (&00) FILES AVAILABLE
Meaning
The PRODAMP library does not contain any source/object files.
DMP4113
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4113 EXISTING (&00) INFORMATION
Meaning
Request has not been executed because of existing source/object
information.
Response
Remove information and repeat request.
DMP4114
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4114 MISSING (&00) INFORMATION
Meaning
Request has not been executed because of missing source/object
information.
DMP4115
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4115 SOURCE TEXT FOR VERSION (&00) NOT FOUND
Meaning
Requested source has not been found in PRODAMP library.
DMP4116
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4116 EXISTING SOURCE TEXT FOR VERSION (&00) IN PRODAMP LIBRARY
Meaning
An existing source text cannot be replaced by the WRITE option.
Response
Use UPDATE option.
DMP4117
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4117 SOURCE TEXT FOR VERSION (&00) NOT IN PRODAMP LIBRARY
Meaning
The UPDATE option can only be used to replace an existing source text.
Response
Use WRITE option.
DMP4118
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4118 PROCEDURE NAME CANNOT BE CHANGED IF OBJECT AVAILABLE
Meaning
Change of procedure name only permitted with compilation.
Response
Use COMPILE option.
DMP4119
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4119 (&00) IS NOT A PLAM LIBRARY
Response
Assign another library via ASSIGN-PRODAMP-LIBRARY.
DMP4120
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4120 (&00) NOT FOUND IN (&01)
Response
Check your library.
DMP4121
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4121 INCORRECT MODULE (&00) LOADED FROM (&01)
Response
Check your library or contact FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4122
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4122 EDT CANNOT BE USED IF REMOTE DAMP PARTNER IS A BATCH TASK
DMP4123
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4123 PRODAMP LIBRARY ACCESS PROCESSING
Meaning
A source text has been read from the PRODAMP library.
This source text is locked against access from other users.
The lock will be released by Upd, New or Inf.
DMP4124
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4124 SOURCE TEXT FOR VERSION (&00) LOCKED
Meaning
Another user has read the source text with the LOCK option.
Response
Wait for release.
DMP4125
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4125 SAVE PROCESSING COMPLETED
Meaning
The SAVE option has been executed successfully during source text
processing with the LOCK option.
DMP4126
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4126 ACCESS TO THE PRODAMP (&00) LIBRARY COMPLETED
Meaning
No error occurred during access to the PRODAMP library.
DMP4127
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4127 TOO MANY LINES IN PRODAMP PROCEDURE (>99999). LINES WERE TRUNCATED.
Meaning
Self explanatory
DMP4199
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4199 PRODAMP TEST VERSION. USE AT YOUR OWN RISK
Meaning
The loaded PRODAMP version has not been released.
This message is issued by PRODAMP test versions only.
DMP4201
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4201 PRODAMP INTERPRETER VERSION (&00) LOADED
Meaning
The DAMP programming system PRODAMP is loaded and the PRODAMP
interpreter has just been loaded.
DMP4202
Destination: USER-TASK Routing code: Weight: 02
Warranty : NO
DMP4202 EXECUTION COMPLETED. TIME USED: (&00) (&01) AT (&02) LINES/S
Meaning
A PRODAMP procedure has been executed and terminated normally.
DMP4203
Destination: USER-TASK Routing code: Weight: 02
Warranty : NO
DMP4203 EXECUTION CANCELED. TIME USED: (&00) (&01) AT (&02) LINES/S
Meaning
A PRODAMP procedure has been executed and canceled by the user.
DMP4204
Destination: USER-TASK Routing code: Weight: 02
Warranty : NO
DMP4204 RETURN EXECUTED. TIME USED: (&00) (&01) AT (&02) LINES/S
Meaning
A PRODAMP procedure has been executed and terminated explicitly
by a RETURN statement.
DMP4205
Destination: USER-TASK Routing code: Weight: 02
Warranty : NO
DMP4205 PROCEDURE (&00) NOT INITIATED OR NOT INTERRUPTED
Meaning
A PRODAMP procedure was to be restarted.
The request has not been executed because of an erroneous condition.
Response
Call FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4301
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4301 PRODAMP OBJECT DECODER VERSION (&00) LOADED
Meaning
The PRODAMP object decoding system has been loaded.
DMP4302
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4302 INSTRUCTION MEMORY
Meaning
This text serves only as an insert for messages DMP4305, DMP4306.
DMP4303
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4303 VARIABLE MEMORY
Meaning
This text serves only as an insert for messages DMP4305, DMP4306.
DMP4304
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4304 CONSTANT MEMORY
Meaning
This text serves only as an insert for messages DMP4305, DMP4306.
DMP4305
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4305 PROCEDURE (&00): (&01) ((&02))
Meaning
A 4K page of the specified memory of the PRODAMP procedure entered
has been decoded. The page can be found at the address displayed in
parentheses.
DMP4306
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4306 PROCEDURE (&00): (&01) NOT FOUND
Meaning
A 4K page of the specified memory has been requested with EDT statement
HALT I/V/C/+/-. It was not found in the specified PRODAMP procedure.
DMP4307
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4307 INVALID HALT PARAMETER "(&00)". DECODING TERMINATED
Meaning
An invalid operand was supplied with EDT statement HALT.
DMP4401
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4401 COMPILATION COMPLETED. TIME USED: (&00) (&01) AT (&02) LINES/S
Meaning
The PRODAMP compilation has been completed successfully.
DMP4402
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4402 UNDEFINED PRODAMP COMPILER MESSAGE
Meaning
The return code created by the PRODAMP compiler is unknown to
the PRODAMP message handler.
Response
With SETSW ON=30 the return code will be displayed.
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4403
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4403 (&00) EXCEEDS (&01) (&02)
Response
Correct PRODAMP procedure.
DMP4404
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4404 HEXADECIMAL IDENTIFIER
Meaning
This text is used as an insert for DMP4403.
DMP4405
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4405 BINARY IDENTIFIER
Meaning
This text is used as an insert for DMP4403.
DMP4406
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4406 VARIABLE IDENTIFIER
Meaning
This text is used as an insert for DMP4403.
DMP4407
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4407 STRING
Meaning
This text is used as an insert for DMP4403 and DMP4417.
DMP4408
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4408 HEXADECIMAL STRING
Meaning
This text is used as an insert for DMP4403.
DMP4409
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4409 SYMBOL IDENTIFIER
Meaning
This text is used as an insert for DMP4403.
DMP4410
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4410 CHARACTERS
Meaning
This text is used as an insert for DMP4403.
DMP4411
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4411 CHARACTERS, USE STRING CONCATENATION
Meaning
This text is used as an insert for DMP4403.
DMP4412
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4412 INVALID IDENTIFIER
Response
Correct PRODAMP procedure.
DMP4413
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4413 INVALID HEXADECIMAL STRING, EVEN NUMBER OF CHARACTERS EXPECTED
Response
Correct PRODAMP procedure.
DMP4414
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4414 EOF DURING IDENTIFIER VALIDATION
Meaning
End of procedure detected and identifier validation is not yet
completed.
Response
Correct PRODAMP procedure.
DMP4415
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4415 COMPILATION MODE NOT YET IMPLEMENTED
Meaning
This message is issued by PRODAMP test versions only.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4416
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4416 INVALID STATEMENT
Response
Correct PRODAMP procedure.
DMP4417
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4417 INVALID (&00), (&01) EXPECTED
Response
Correct PRODAMP procedure.
DMP4418
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4418 STATEMENT
Meaning
This text is used as an insert for DMP4417.
Note: The text must start with a blank.
DMP4419
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4419 PARAMETER
Meaning
This text is used as an insert for DMP4417.
DMP4420
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4420 FOLLOW STATEMENT
Meaning
This text is used as an insert for DMP4417.
Note: The text must start with a blank.
DMP4421
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4421 VARIABLE OR KEYWORD
Meaning
This text is used as an insert for DMP4417.
DMP4422
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4422 VARIABLE
Meaning
This text is used as an insert for DMP4417.
DMP4423
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4423 INVALID USE OF POINTER VARIABLE (&00)
Response
Correct PRODAMP procedure.
DMP4424
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4424 USE OF SYMBOL RESTRICTED TO POINTER VARIABLE (&00)
Response
Correct PRODAMP procedure.
DMP4425
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4425 INVALID USE OF (&00), (&01) EXPECTED
Response
Correct PRODAMP procedure.
DMP4426
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4426 DENOTATION
Meaning
This text is used as an insert for DMP4425.
DMP4427
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4427 STATEMENT IDENTIFIER
Meaning
This text is used as an insert for DMP4425.
DMP4428
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4428 INVALID STATEMENT DELIMITER, SEMICOLON EXPECTED
Response
Correct PRODAMP procedure.
DMP4429
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4429 TYPE CONFLICT IN POINTER VARIABLE
Meaning
The pointer variable has neither type ADDRESS nor NUMERIC.
Response
Correct PRODAMP procedure.
DMP4430
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4430 INVALID POINTER, (&00) EXPECTED
Meaning
The symbol used is only for use with the specified pointer.
Response
Correct PRODAMP procedure.
DMP4431
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4431 SYMBOL NOT FOR USE WITH POINTER (&00)
Response
Correct PRODAMP procedure.
DMP4432
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4432 COMMENT NOT CLOSED, " EXPECTED
Response
Correct PRODAMP procedure.
DMP4433
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4433 INVALID (&00) CALL, (&01) EXPECTED
Meaning
Invalid function/procedure call due to missing open/close parenthesis.
Response
Correct PRODAMP procedure.
DMP4434
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4434 FUNCTION
Meaning
This text is used as an insert for DMP4433.
DMP4435
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4435 PROCEDURE
Meaning
This text is used as an insert for DMP4433.
DMP4436
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4436 INVALID USE OF (&00)
Meaning
The specified word symbol is invalid in this context.
Response
Correct PRODAMP procedure.
DMP4437
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4437 INVALID STATEMENT DELIMITER, NO END FOR (&00) SPECIFIED
Meaning
Invalid END identifier for specified statement.
Response
Correct PRODAMP procedure.
DMP4438
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4438 INVALID (&00) STATEMENT, END EXPECTED
Meaning
Missing END for specified statement.
Response
Correct PRODAMP procedure.
DMP4439
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4439 INVALID ASSIGNMENT
Meaning
The symbol cannot be assigned to a variable.
Response
Correct PRODAMP procedure.
DMP4440
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4440 TYPE CONFLICT IN (&00)
Meaning
The types of the variable/parameter and of the expression to be
assigned are different.
Response
Correct PRODAMP procedure.
DMP4441
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4441 ASSIGNMENT
Meaning
This text is used as an insert for DMP4440 and DMP4417.
DMP4442
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4442 PARAMETER ASSIGNMENT
Meaning
This text is used as an insert for DMP4440.
DMP4443
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4443 VARIABLE HAS NOT BEEN EVALUATED
Meaning
The variable has not been resolved. PRODAMP error possible!
Response
Analyze your procedure and contact your FUJITSU TECHNOLOGY SOLUTIONS
service center
if you believe to have a correct procedure.
DMP4444
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4444 (&00) CALL NOT YET IMPLEMENTED
Meaning
This message is issued by PRODAMP test versions only.
DMP4445
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4445 INVALID PARAMETER LIST, TOO MANY PARAMETERS
Response
Correct PRODAMP procedure.
DMP4446
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4446 INVALID PARAMETER LIST, COMMA EXPECTED
Response
Correct PRODAMP procedure.
DMP4447
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4447 INVALID SEPARATOR, 'WINDOW=' OR SEMICOLON EXPECTED
Response
Correct PRODAMP procedure.
DMP4448
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4448 INVALID ARRANGE STATEMENT, DENOTATION SPECIFIED TWICE
Response
Correct PRODAMP procedure.
DMP4449
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4449 INVALID SYMBOL FOR ARRANGE
Response
Correct PRODAMP procedure.
DMP4450
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4450 INVALID DENOTATION FOR ARRANGE
Response
Correct PRODAMP procedure.
DMP4451
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4451 INVALID DENOTATION LIST, COMMA EXPECTED
Response
Correct PRODAMP procedure.
DMP4452
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4452 INVALID DELIMITER FOR ARRANGE SYMBOL, COLON EXPECTED
Response
Correct PRODAMP procedure.
DMP4453
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4453 INVALID DENOTATION SEPARATOR, = EXPECTED
Response
Correct PRODAMP procedure.
DMP4454
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4454 INVALID DENOTATION ASSIGNMENT, UNDEFINED EXPECTED
Response
Correct PRODAMP procedure.
DMP4455
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4455 INVALID DENOTATION ASSIGNMENT, NUMERIC/PATTERN/STRING EXPECTED
Response
Correct PRODAMP procedure.
DMP4456
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4456 INVALID RELATION OPERATOR
Response
Correct PRODAMP procedure.
DMP4457
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4457 INVALID OPERATOR FOR (&00) RELATION
Response
Correct PRODAMP procedure.
DMP4458
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4458 INVALID USE OF KEYWORD IN EXPRESSION
Response
Correct PRODAMP procedure.
DMP4459
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4459 INVALID USE OF PROCEDURE CALL IN EXPRESSION
Response
Correct PRODAMP procedure.
DMP4460
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4460 INVALID NOT OPERATOR
Response
Correct PRODAMP procedure.
DMP4461
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4461 INVALID OPERATION TYPE IN EXPRESSION
Response
Correct PRODAMP procedure.
DMP4462
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4462 INVALID DELIMITER IN EXPRESSION
Response
Correct PRODAMP procedure.
DMP4463
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4463 TYPE CONFLICT IN EXPRESSION
Response
Correct PRODAMP procedure.
DMP4464
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4464 TYPE CONFLICT IN RELATION
Response
Correct PRODAMP procedure.
DMP4465
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4465 INVALID EXPRESSION, OPERATOR OR DELIMITER EXPECTED
Response
Correct PRODAMP procedure.
DMP4466
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4466 INVALID EXPRESSION, IDENTIFIER EXPECTED
Response
Correct PRODAMP procedure.
DMP4467
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4467 INVALID EXPRESSION, ')' EXPECTED
Response
Correct PRODAMP procedure.
DMP4468
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4468 INVALID EXPRESSION, OPERATOR EXPECTED
Response
Correct PRODAMP procedure.
DMP4469
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4469 INVALID LOGICAL EXPRESSION, RELATION EXPECTED
Response
Correct PRODAMP procedure.
DMP4470
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4470 INVALID OPERATOR, 'AND'/'OR' EXPECTED
Response
Correct PRODAMP procedure.
DMP4471
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4471 INVALID RELATION DELIMITER, '(&00)' EXPECTED
Response
Correct PRODAMP procedure.
DMP4472
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4472 EOF DETECTED DURING COMPILATION OF EXPRESSION
Response
Correct PRODAMP procedure.
DMP4473
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4473 INVALID SYMBOL REFERENCE SPECIFIED
Meaning
An ARRANGE statement contains a REFERENCE denotation with an
invalid reference specification.
Response
Correct PRODAMP procedure.
DMP4474
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4474 UNDEFINED PARAMETER '(&00)'
Response
Use ARRANGE to define parameter!
DMP4475
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4475 ERROR IN LINE: (&00) IN THE PROCEDURE SOURCE
Meaning
The previous message belongs to the line with the given line number
or one of its continuation lines.
Response
Check the Procedure source for any errors.
DMP4501
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4501 RTS ERROR MESSAGE FROM (&00) ((&01)), LINE (&02):
Meaning
Execution of the specified PRODAMP procedure has been aborted.
The error will be specified with the next message.
Response
Check your procedure.
DMP4502
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4502 UNDEFINED PRODAMP-RTS MESSAGE
Meaning
The return code created by PRODAMP-RTS is unknown to the PRODAMP
message handler.
Response
With SETSW ON=30 the return code will be displayed.
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4503
Destination: USER-TASK Routing code: Weight: 02
Warranty : NO
DMP4503 PROCEDURE (&00) ((&01)) INTERRUPTED AT LINE (&02)
Meaning
Execution of the specified PRODAMP procedure has been interrupted.
DMP4504
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4504 ADDRESS NOT ACCESSIBLE
Meaning
The PRODAMP interpreter has been supplied with an invalid address.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4505
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4505 INVALID OPERATION ((&00))
Meaning
The operation is invalid for the specified data type or
the interpreter code itself is invalid.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4506
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4506 MEMORY DESTROYED
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4507
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4507 MEMORY EXHAUSTED FOR RECURSIVE CALL
DMP4508
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4508 INVALID @PROC/@SETF STATEMENT FOR EDT ACCESS
Response
Correct your PRODAMP procedure.
DMP4509
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4509 INVALID @END STATEMENT FOR EDT ACCESS
Response
Correct your PRODAMP procedure.
DMP4510
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4510 EDT ACCESS ERROR ( EDT RC = (&00) )
Meaning
General EDT error.
EDT access has been terminated with the specified error code.
DMP4511
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4511 DATA OVERFLOW ((&00))
Meaning
The specified data type exceeds the maximum or minimum.
Response
Correct your PRODAMP procedure.
DMP4512
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4512 DIVISION BY 0
Response
Correct your PRODAMP procedure.
DMP4513
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4513 NEGATIVE FACTOR IN STRING MULTIPLICATION
Response
Correct your PRODAMP procedure.
DMP4514
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4514 VARIABLE SIZE OVERFLOW ((&00))
Meaning
Value to be stored exceeds variable size of specified type.
Response
Correct your PRODAMP procedure.
DMP4515
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4515 VARIABLE IS NOT INITIALIZED
Meaning
No value assigned to variable.
Response
Correct your PRODAMP procedure.
DMP4516
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4516 TYPE CONFLICT OF OPERANDS
Meaning
Wrong operand type in PRODAMP interpreter instruction.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4517
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4517 INVALID WINDOW SPECIFIED
Response
Correct your PRODAMP procedure.
DMP4518
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4518 SYMBOL (&00) NOT FOUND
Response
Correct your PRODAMP procedure.
DMP4519
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4519 SYMBOL (&00) CANNOT BE AUTOMATICALLY LOCALIZED
Response
Correct your PRODAMP procedure.
DMP4520
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4520 MISSING ARRANGE PARAMETER ((&00))
Meaning
The specified ARRANGE parameter is required.
Response
Correct your PRODAMP procedure.
DMP4521
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4521 INCONSISTENT ARRANGE PARAMETERS ((&00))
Meaning
The specified parameters cannot be given in the same ARRANGE statement
Response
Correct your PRODAMP procedure.
DMP4522
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4522 INVALID DATA FOR ARRANGE PARAMETER ((&00))
Meaning
Invalid data assigned to specified ARRANGE parameter.
Response
Correct your PRODAMP procedure.
DMP4523
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4523 INVALID ARRANGE PARAMETERS IN CASE OF PAM FILE
Meaning
A PAM file is open and some ARRANGE parameters cannot be used.
Response
Correct your PRODAMP procedure.
DMP4524
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4524 NO OBJECT FOUND FOR PROCEDURE (&00)
Meaning
The specified PRODAMP procedure has been called, but
no object of this name is loaded or available in the specified
PRODAMP library.
Response
Correct your PRODAMP procedure or specify another library.
DMP4525
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4525 INVALID CONVERSION
Meaning
An invalid convert operation was to be executed.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4526
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4526 ATTEMPT TO ACCESS A NON-EXISTING PARAMETER
Response
Correct your PRODAMP procedure.
DMP4527
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4527 ATTEMPT TO ACCESS A PARAMETER WITH INVALID SIZE
Meaning
The value of a numeric parameter exceeds word value size.
Response
Correct your PRODAMP procedure.
DMP4528
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4528 INVALID ADDRESSING TYPE VALUE
Meaning
The addressing type value is not between 0 and 2.
Response
Correct your PRODAMP procedure.
DMP4529
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4529 NO ADDITIONAL SPACE AVAILABLE FOR LIST OUTPUT
Meaning
Space exhausted for creation of list file.
DMP4530
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4530 INVALID OUTPUT SIZE SPECIFIED FOR DUMP_MEMORY
Response
Correct your PRODAMP procedure.
DMP4531
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4531 INVALID SKIP SIZE SPECIFIED FOR SET_HEADER
Response
Correct your PRODAMP procedure.
DMP4532
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4532 INVALID PRINTER CONTROL CHARACTER FOR LIST
Response
Correct your PRODAMP procedure.
DMP4533
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4533 DAMP STATEMENT SPECIFIED FOR COMMAND IS ERRONEOUS OR NOT ALLOWED
Response
Correct your PRODAMP procedure.
DMP4534
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4534 DATA TYPES IN PARAMETER ASSIGNMENT DO NOT MATCH
Response
Correct your PRODAMP procedure.
DMP4535
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4535 INVALID LINE NUMBER FOR IMMEDIATE MESSAGE
Meaning
Only 1 or 2 is permitted as line number.
Response
Correct your PRODAMP procedure.
DMP4536
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4536 PROCEDURE HAS NOT BEEN RESUMED WITH P13
Meaning
A PRODAMP procedure had been interrupted by READ_WINDOW
and was not resumed by P13.
Response
Correct your PRODAMP procedure.
DMP4537
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP4537 WITH REFERENCE
Meaning
This text is used as an insert for DMP4519.
DMP4538
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4538 SYMBOL (&00) IS NOT A STRUCTURE NAME
Meaning
The specified symbol in the reference of a structured symbol is not
the last one and does not specify a structure.
Response
Correct your PRODAMP procedure.
DMP4539
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4539 ARRAY REFERENCE IS NOT YET SUPPORTED
Meaning
The reference of a structured symbol contains an ARRAY which is not
the last symbol of the reference.
Such references are not yet supported in PRODAMP.
Response
Correct your PRODAMP procedure.
DMP4540
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4540 INVALID PROCEDURE CALL
Meaning
A call mode for an internal PRODAMP procedure has been detected
which is not yet supported. Probably the memory has been destroyed.
Response
Call your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP4541
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4541 NO REFERENCE LIST AVAILABLE FOR ADDRESS/LENGTH
Meaning
One of the functions ADDRESS or LENGTH has been called with parameter
'RF'. But there is no reference list created by REFERENCE calls.
Response
Correct your PRODAMP procedure.
DMP4542
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4542 REFERENCE LIST NOT RESOLVED BY ADDRESS/LENGTH
Meaning
By some REFERENCE calls, a reference list has been created. But the
reference list has not been resolved by one of the function calls
ADDRESS or LENGTH before termination of the PRODAMP procedure.
Response
Correct your PRODAMP procedure.
DMP4543
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4543 LINK ERROR (&00) WHILE LOADING (&01) BY ENTER_MODULE
Meaning
The LINK macro returned the displayed error code.
Response
Check the displayed error code of the LINK macro and possibly
transfer the requested module to the assigned PRODAMP library
or correct your PRODAMP procedure.
DMP4544
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP4544 ERROR (&00) DURING UNLOADING OF (&01) LOADED BY ENTER_MODULE
Meaning
The PBUNLD macro returned the displayed error code.
Response
Check the displayed error code of the PBUNLD macro and
take appropriate measures.
DMP5100
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5100 REMOTE DIAGNOSIS VERSION (&00) LOADED
DMP5101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5101 DAMP VERSION (&00) WAITING FOR CONNECTION AS APPLICATION (&01)
DMP5102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5102 CONNECTION RESTRICTED TO APPLICATION (&00) IN HOST (&01)
Meaning
Only requests by the named partner will be accepted.
DMP5103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5103 CONNECTION RESTRICTED TO TERMINAL (&00) VIA PROCESSOR (&01)
Meaning
Only requests by the named terminal are accepted.
DMP5104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5104 CONNECTION WITH APPLICATION (&00) SET UP ON HOST (&01)
DMP5105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5105 CONNECTION WITH TERMINAL (&00) SET UP VIA PROCESSOR (&01)
DMP5106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5106 SECURITY LEVEL (&00) IS VALID FOR THIS CONNECTION
Meaning
The following security levels exist for remote diagnosis:
DIAL = no protocol,
LOG = protocol on DAMP terminal,
ACK = user on DAMP terminal has to acknowledge.
DMP5107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5107 ERROR (&02) WHEN CONNECTING TO PARTNER (&00), (&01)
Response
Check the DCAM return code given as reason.
DMP5108
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5108 PARTNER (&00), (&01) IS NOT AN APPLICATION
Meaning
A connection to an application was requested, but a terminal
tried to connect.
Response
Check the names you specified for the host/application.
DMP5109
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5109 PARTNER (&00), (&01) IS NOT A TERMINAL
Meaning
A connection to a terminal was requested, but an application
tried to connect.
Response
Check the names you specified for the processor/terminal.
DMP5110
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5110 CONNECTION LOST TO APPLICATION (&00) ON HOST (&01)
DMP5111
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5111 CONNECTION LOST TO TERMINAL (&00) VIA PROCESSOR (&01)
DMP5112
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5112 CONNECTION ATTEMPT BY NON-DAMP APPLICATION REJECTED
DMP5113
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5113 ERROR (&00) WHILE SENDING OR RECEIVING; CONNECTION DISABLED
Meaning
Probably a forced disconnection disrupted communication.
DMP5114
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5114 TRANSMISSION OF THIS SCREEN MUST BE ACCEPTED (&00) OR REJECTED (&01)
Meaning
The supervisor is asked to acknowledge the displayed screen.
Response
Send <DUE> to accept transmission or
send <F2> to reject transmission.
With <F2> plus DAMP statements you can also modify the screen
before you finally transmit it with DUE.
DMP5115
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5115 TRANSMISSION REJECTED BY SUPERVISOR
Meaning
The supervisor gave <F2> to reject the transmission of a screen.
DMP5116
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5116 SCREEN CHECKED AND TRANSMITTED
Meaning
The supervisor gave DUE to accept the transmission of a screen.
DMP5117
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5117 EDT STATEMENT (&00) NOT ALLOWED IN REMOTE DIAGNOSIS MODE
DMP5118
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5118 BREAK NOT ALLOWED WHEN START-REMOTE-DIAGNOSIS HAS BEEN GIVEN
Response
Stop remote diagnosis by END statement.
DMP5119
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5119 K(&00) NOT ALLOWED IN REMOTE DIAGNOSIS MODE
DMP5120
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5120 TERMINAL (&00) OF HOST (&01) TRIED TO CONNECT
DMP5121
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5121 DAMP EXCHANGES REMOTE DIAGNOSIS. PLEASE DON'T INTERRUPT
DMP5122
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP5122 REMOTE DIAGNOSIS EXCHANGE FINISHED
DMP7001
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7001 DMS ERROR (&00) IN FILE MACRO FOR LIST FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP7002
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7002 DMS ERROR (&00) WHILE OPENING THE LIST FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP7003
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7003 DMS ERROR (&00) WHILE CLOSING THE LIST FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP7004
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7004 DMS ERROR (&00) WHILE WRITING TO THE LIST FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP7005
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7005 NO ADDITIONAL SPACE AVAILABLE FOR CURRENT USER ID
Response
Remove files that are no longer needed or reduce selection of
list output.
DMP7006
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7006 ERROR DURING OUTPUT ON SYSLST (WRLST ERROR: (&00))
DMP7100
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7100 XVT NOT ACCESSIBLE
Meaning
The XVT could not be read. Output of global and local XVTs is aborted.
DMP7101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7101 PROCESSOR SAVED STATUS OF GP# (&00) NOT ACCESSIBLE
Meaning
An error occurred while reading the Saved Status of the given processor.
Output of the Saved Status of the given processor is aborted.
DMP7102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7102 SAVED CONTEXT OF LM# (&00) (GP# (&01)) NOT ACCESSIBLE
Meaning
An error occurred while reading the Saved Context of the given processor.
Output of the Saved Context of the given processor is aborted.
DMP7103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7103 PREFIXED STORAGE AREA (PSA) OF GP# (&00) NOT ACCESSIBLE
Meaning
The prefixed storage area of the given processor could not be read.
Output of the PSA is aborted.
DMP7104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7104 PREFIXED STORAGE AREA (PSA) OF LM# (&00) (GP# (&01)) NOT ACCESSIBLE
Meaning
The prefixed storage area of the given processor could not be read.
Output of the PSA is aborted.
DMP7105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7105 PRINTING GLOBAL XVT
Meaning
Message issued for tracing the current state of list output.
DMP7106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7106 PRINTING LOCAL XVTS
Meaning
Message issued for tracing the current state of list output.
DMP7107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7107 PRINTING SAVED STATUS AND PREFIXED STORAGE AREA
Meaning
Message issued for tracing the current state of list output.
DMP7200
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7200 TCB NOT ACCESSIBLE
Meaning
The TCB of the task specified in the previous header could not be read.
Output of TCB is aborted.
DMP7201
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7201 STACK INFORMATION NOT ACCESSIBLE
Meaning
Information about the stacks specified in the previous header could not
be read. Stack output is aborted.
DMP7202
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7202 STACK INFORMATION NOT COMPLETE
Meaning
Information about the stacks specified in the previous header is not
complete. Some stacks may be missing.
DMP7203
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7203 NO STACKS FOUND
Meaning
No stacks were found for the task specified in the previous header.
DMP7204
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7204 INFORMATION NOT USABLE (PCB NOT UPDATED)
Meaning
The field ESTKSIND indicates that the registers were not stored.
DMP7205
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7205 (&00) AUDIT NOT ACTIVE (TABLE HISTORICAL)
Meaning
The given AUDIT is no longer active and the shown table therefore
not up-to-date.
DMP7206
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7206 PRINTING TASK (&00) : TCB
Meaning
Message issued for tracing the current state of list output.
DMP7207
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7207 PRINTING TASK (&00) : PCB'S
Meaning
Message issued for tracing the current state of list output.
DMP7208
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7208 PRINTING TASK (&00) : SPL STACKS
Meaning
Message issued for tracing the current state of list output.
DMP7209
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7209 PRINTING TASK (&00) : AUDIT TRACES
Meaning
Message issued for tracing the current state of list output.
DMP7210
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7210 ACCESS REGISTERS NOT ACCESSIBLE FOR THIS PCB
Meaning
The process to which this PCB belongs was running in AR mode, but the
access registers could not be read.
DMP7211
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7211 PRINTING TASK (&00) : TRACE TABLE
Meaning
Message issued for tracing the current state of list output.
DMP7212
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7212 TRACE TABLE INFORMATION NOT ACCESSIBLE
DMP7300
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7300 NO SUBSYSTEM INFORMATION AVAILABLE
Meaning
Information about subsystems is not accessible. No CSECT maps can be
be printed.
DMP7301
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7301 CSECT MAP FOR (&00) NOT AVAILABLE
DMP7302
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7302 ANCHOR TO CONCISE-REP-INFO NOT ACCESSIBLE
Meaning
The pointer to the CONCISE-REP-INFO is not accessible. Therefore
no concise REP information is printed.
DMP7303
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7303 TRACE TABLE INFORMATION NOT ACCESSIBLE
DMP7304
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7304 REPSAVE AREA AT (&00) NOT ACCESSIBLE
Meaning
The REPSAVE area could not be read at the given address. Output of
REP information is aborted.
DMP7305
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7305 INCONSISTENCY IN REPSAVE AREA HEADER AT (&00)
Meaning
The information in the REPSAVE area header seems to be wrong.
DMP7306
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7306 INCONSISTENCY IN REPSAVE AREA ENTRY AT (&00)
Meaning
The information in the REPSAVE area entry seems to be wrong.
DMP7307
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7307 INVALID REPS FOUND (TYPE='***')
Meaning
Some of the REPs found were marked as invalid. In the listing,
these REPs are marked with '***' in the type field.
DMP7308
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7308 OVERLAPPING REPS WERE FOUND (TYPE='O-L')
Meaning
Some of the REPs found had overlapping ranges. These REPs are
marked with 'O-L' in the type field.
DMP7309
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7309 PETRA BUFFER AT (&00) NOT ACCESSIBLE
Meaning
The PETRA buffer at the given address could not be read.
Evaluation of the PETRA buffer is aborted.
DMP7310
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7310 NO PETRA CONTEXT FOR THIS TASK
Meaning
No PETRA context could be found for the current task.
DMP7311
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7311 NO PETRA CONTEXT AVAILABLE
DMP7312
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7312 CPU TYPE IS UNKNOWN. DEFAULT LAYOUT FOR MACHINE TRACE ASSUMED
DMP7313
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7313 PETRA CONTEXT AT (&00) NOT ACCESSIBLE
Meaning
The PETRA context at the given address could not be read. Evaluation
of the PETRA context is aborted.
DMP7314
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7314 PETRA MACHINE TRACE AT (&00) INCOMPLETE
Meaning
The PETRA machine trace at the given address could not be read
completely. Evaluation continues.
DMP7315
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7315 PETRA-MACHINE TRACE AT (&00) NOT ACCESSIBLE
Meaning
The PETRA machine trace at the given address could not be read.
Evaluation of the machine trace is aborted.
DMP7316
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7316 TRACE MANAGER TABLE NOT ACCESSIBLE
Meaning
The trace manager table, which contains information about the active
traces, could not be read. Output of trace manager information is
aborted.
DMP7317
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7317 NO TRACE MANAGER ENTRIES FOUND
DMP7318
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7318 READING ETPND INFORMATION FOR CSECT MAPS OF NUCLEUS
Meaning
Message issued for tracing the current state of list output.
DMP7319
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7319 PRINTING CSECT MAPS
Meaning
Message issued for tracing the current state of list output.
DMP7320
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7320 PRINTING CONCISE REP INFORMATION
Meaning
Message issued for tracing the current state of list output.
DMP7321
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7321 PRINTING PETRA CONTEXT
Meaning
Message issued for tracing the current state of list output.
DMP7322
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7322 PRINTING SYSTEM TRACE TABLE
Meaning
Message issued for tracing the current state of list output.
DMP7323
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7323 PRINTING TASK (&00) : TRACE TABLE
Meaning
Message issued for tracing the current state of list output.
DMP7324
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7324 PRINTING TRACE MANAGER INFORMATION
Meaning
Message issued for tracing the current state of list output.
DMP7325
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7325 PRINTING TASK SUMMARY
Meaning
Message issued for tracing the current state of list output.
DMP7326
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7326 PRINTING REPLOG FILE
Meaning
Message issued for tracing the current state of list output.
DMP7327
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7327 ERROR OCCURRED WHILE PRINTING REPLOG FILE
Meaning
During output of the REPLOG file an error occurred.
Certain information may be missing.
DMP7328
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7328 (&00) AUDIT NOT ACTIVE (TABLE HISTORICAL)
Meaning
The given AUDIT is no longer active and the shown table therefore
not up-to-date.
DMP7329
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7329 PRINTING PROCESSOR LOCAL LINKAGE-AUDIT
Meaning
Message issued for tracing the current state of list output.
The given AUDIT is no longer active and the shown table therefore
not up-to-date.
DMP7400
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7400 WARNING : PAGE NUMBER IS LARGER THAN LAST PAGE POINTER
Meaning
The page that is listed does not logically belong to the file
currently opened.
DMP7401
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7401 VALUES IN COMMUNICATION AREA OF AREA DUMP TOO LARGE
Meaning
The values that were found in the communication area are larger
than allowed; evaluation is aborted.
DMP7402
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7402 PAGE (&00) NOT ACCESSIBLE (PAGE NOT ALLOCATED)
DMP7403
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7403 PAGE (&00) NOT ACCESSIBLE (PAGE NOT IN DUMP)
DMP7404
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7404 PAGE (&00) NOT ACCESSIBLE (TEST PRIVILEGE TOO LOW)
DMP7405
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7405 INFORMATION FOR PRINTING OF MEMORY CLASS (&00) NOT AVAILABLE
Meaning
The necessary information for printing the given memory classes
could not be found. Output of the memory classes is aborted.
DMP7406
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7406 MODULE (&00) COULD NOT BE FOUND
Meaning
The necessary information about the given module could not be
found. Output of the given module is aborted.
DMP7407
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7407 INFORMATION ABOUT VIRTUAL MEMORY NOT COMPLETE
Meaning
An error occurred while evaluating the tables that indicate
which virtual pages are allocated. Some pages may be missing.
DMP7408
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7408 PRINTING PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7409
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7409 PRINTING AREA DUMP AREAS
Meaning
Message issued for tracing the current state of list output.
DMP7410
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7410 PRINTING REFERENCED PAGES : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7411
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7411 PRINTING TASK (&00) : REFERENCED PAGES : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7412
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7412 PRINTING TASK (&00) : REFERENCED CLASS 6 PAGES : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7413
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7413 PRINTING REFERENCED SYSTEM PAGES : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7415
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7415 PRINTING TASK (&01) : CLASS (&00) MEMORY : PAGE (&02)
Meaning
Message issued for tracing the current state of list output.
DMP7416
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7416 PRINTING TASK (&01) : CLASS (&00) MEMORY POOLS : PAGE (&02)
Meaning
Message issued for tracing the current state of list output.
DMP7417
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7417 PRINTING TASK (&01) : CLASS (&00) PARTIAL PAGES : PAGE (&02)
Meaning
Message issued for tracing the current state of list output.
DMP7418
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7418 PRINTING TASK (&01) : CLASS (&00) FULL PAGES : PAGE (&02)
Meaning
Message issued for tracing the current state of list output.
DMP7419
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7419 PRINTING CLASS (&00) MEMORY : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7420
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7420 PRINTING CLASS (&00) PARTIAL PAGES : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7421
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7421 PRINTING CLASS (&00) FULL PAGES : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7422
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7422 PRINTING CLASS (&00) NON-PRIVILEGED PAGES : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7423
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7423 PRINTING MODULE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7424
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7424 PRINTING SYSTEM PAGES : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7425
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7425 PRINTING TASK (&00) : USER PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7426
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7426 PRINTING REAL PAGES : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7427
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7427 PRINTING HARDWARE SYSTEM AREA : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7428
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7428 PRINTING TASK (&00) : DATA SPACE WITH ALET (&01) : PAGE (&02)
Meaning
Message issued for tracing the current state of list output.
DMP7429
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7429 PRINTING SYSTEM DATA SPACE WITH ALET (&00) : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7430
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7430 PRINTING DATA SPACE WITH SPID (&00) : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7431
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7431 PAGE (&00) NOT ACCESSIBLE (TASK ERROR FOR TID (&01))
Meaning
The given page could not be listed because the given task does not
exist or because it is a user page (TID = 0).
DMP7432
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7432 PRINTING PROCESSOR SAVED STATUS OF CPU (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7433
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7433 VIRTUAL MEMORY LIMITS FOR TID (&00) NOT AVAILABLE
Meaning
The limits of class 5 and class 6 of the given task are not accessible.
The referenced class 6 pages cannot be printed.
DMP7434
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7434 PAGES (&00) TO (&01) NOT ACCESSIBLE (PAGE NOT ALLOCATED)
DMP7435
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7435 PAGES (&00) TO (&01) NOT ACCESSIBLE (PAGE NOT IN DUMP)
DMP7436
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7436 PAGES (&00) TO (&01) NOT ACCESSIBLE (TEST PRIVILEGE TOO LOW)
DMP7437
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7437 PAGES (&00) TO (&01) NOT ACCESSIBLE (TASK ERROR FOR TID (&02))
Meaning
The given pages could not be listed because the given task does not
exist or ( being TID = 0 ) because they are user pages.
DMP7438
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7438 PROCESSOR SAVED STATUS OF CPU (&00) NOT ACCESSIBLE.
Meaning
The given area could not be listed because the Processor Saved Area
of the given CPU does not exist.
DMP7439
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7439 PAGE (&00) IS A NULL PAGE.
Meaning
The given page is recognized as null page. Only this error message is
listed.
DMP7440
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7440 PAGES (&00) TO (&01) ARE NULL PAGES.
Meaning
The given pages are recognized as null pages. Only this error message
is listed.
DMP7441
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7441 PROCESSOR SAVED STATUS OF CPU (&00) IS A NULL PAGE.
Meaning
The Processor Saved Area of the given CPU is a null page. Only this
message is printed.
DMP7442
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7442 PRINTING ABSOLUTE PAGES : PAGE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7443
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7443 PAGE (&00) ABOVE THE DUMPED AREA
Meaning
The page lies above the pages saved by the dump-generator.
DMP7444
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7444 PAGES (&00) TO (&01) ABOVE THE DUMPED AREA
Meaning
The pages lie above the pages saved by the dump-generator.
DMP7445
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7445 PRINTING PAGES IN SECTION (&00) : PAGE (&01)
Meaning
Message issued for tracing the current state of list output.
DMP7500
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7500 PRINTING SYSTEM SUMMARY
Meaning
Message issued for tracing the current state of list output.
DMP7501
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7501 PRINTING DUMPFILE INFORMATION
Meaning
Message issued for tracing the current state of list output.
DMP7601
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP7601 LIST OUTPUT FINISHED
Meaning
The selected list output has been terminated normally.
DMP7602
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7602 RESTRICTED MEMORY SELECTION FOR USER DUMPS < 9.5
Meaning
User dumps from BS2000 < 9.5 do not contain information about the type
of the allocated pages. Therefore the complete class 5 or 6 is listed.
DMP7603
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7603 NO SELECTION OF MEMORY POOL PAGES POSSIBLE FOR USER DUMPS
Meaning
User dumps do not contain information about memory pool pages.
Therefore the complete class 5 or 6 is listed.
DMP7604
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7604 NOTE: MEMORY POOL PAGES MUST BE EXPLICITLY SELECTED
Meaning
Memory pool pages are not listed automatically with standard list
outputs or when other kinds of pages of the same class are selected.
They must be explicitly specified.
DMP7605
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP7605 CANCEL PROCESSING COMPLETED
Meaning
The user has canceled the current list output.
DMP7606
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7606 PRINTING DIRECTIVES FOR THE EVALUATION
Meaning
Message issued for tracing the current state of list output.
DMP7607
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7607 SEARCHING FOR POSSIBLE ERROR TASK
Meaning
Message issued for tracing the current state of list output.
DMP7608
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7608 PRINTING WINDOW (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7609
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP7609 SYMBOL '(&00)' NOT FOUND. SOME INFORMATION MAY BE MISSING
Response
Check the standard symbol library/element BS2000/xxx.
DMP7610
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7610 RUNNING AUTOMATIC PREANALYSIS
Meaning
Message issued for tracing the current state of list output.
DMP7611
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7611 RUNNING PRODAMP PROCEDURE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7612
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP7612 LINK ERROR WHILE LOADING PACKAGE (&00) FROM (&01)
Meaning
The LINK macro reported an error during loading of the code/data
module of the given package.
Response
Check library or use the LOAD-MODULE statement to load both
modules from another library.
DMP7613
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP7613 NO VIRTUAL ADDRESSING POSSIBLE
Response
Start explicitly the output of real pages with ASEL=RM.
DMP7614
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP7614 MEDIUM NOT SUPPORTED
DMP7615
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP7615 VM INFO MISSING
DMP7701
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7701 LIST VERSION (&00) LOADED
DMP7702
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7702 ERROR (&00) RETURNED FROM FSTAT
DMP7703
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7703 FILE NO. (&00) FROM (&01)
DMP7704
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7704 INVALID WINDOW NUMBER GIVEN
Meaning
The window number given in the LIST window is not valid.
Only a number between 4 and 9 can be specified.
DMP7705
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7705 ILLEGAL VALUE GIVEN FOR 'PAGE FROM'
Meaning
The value given for 'PAGE FROM' is not a hexadecimal number or
is too large.
DMP7706
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7706 ILLEGAL VALUE GIVEN FOR 'PAGE TO'
Meaning
The value given for 'PAGE TO' is not a hexadecimal number or
is too large.
DMP7707
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7707 NO VALID FILE NAME GIVEN
DMP7708
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7708 <DESCR = YES> IMPLIES <DIAG = YES>
Meaning
For the output of descriptors, a prediagnosis has to be performed.
Response
Select <DIAG = YES> when output of descriptors is desired.
DMP7709
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7709 'PAGE FROM' MUST NOT BE GREATER THAN 'PAGE TO'
DMP7710
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7710 WINDOW (&00) HAS INVALID TYPE FOR LIST OUTPUT
Meaning
Only standard windows can be selected for listing.
DMP7711
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7711 WINDOW (&00) HAS NO VALID CONTENTS
DMP7712
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7712 (&00) IS NOT A VALID TID
Meaning
The specified TID is not a hexadecimal number.
DMP7713
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7713 ERROR WHILE OPENING FILE
DMP7714
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7714 DUMP FILE HAS BEEN OPENED
DMP7715
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7715 SPECIFIED TID DOES NOT EXIST
Response
See task window (window 2) for available TIDs.
DMP7716
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7716 SPECIFIED TSN DOES NOT EXIST
Response
See task window (window 2) for available TSNs.
DMP7717
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7717 SYSTEM AND USER PAGES MUST NOT BE MIXED
Meaning
The range specified by 'PAGE FROM/TO' must lie entirely
in either system memory or user memory.
Response
Correct Range.
DMP7718
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7718 NO VALID TASK FOR PRINTING OF USER MEMORY
Meaning
If user memory is specified (PAGE, CLASS 5/6), then a valid task must
be specified.
Response
Specify the task for which the user memory is to be printed.
DMP7719
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7719 OUTPUT OF WINDOW NOT ALLOWED WITH TSN=*ALL
Meaning
If TSN=*ALL is specified, then specifying a window is not allowed.
DMP7720
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7720 SELECTED OPTIONS NOT SUPPORTED FOR USER DUMPS
Meaning
Some options cannot be selected for user dumps. These are for example
the system trace table, concise REP info or XVT.
Response
See manual for more information.
DMP7721
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7721 'PAGE FROM' MUST BE GREATER THAN ZERO
Meaning
The first page of a PAM file has page number '1'. Therefore the
page numbers must be greater than zero.
DMP7722
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7722 'PAGE TO' EXCEEDS FILE SIZE
DMP7723
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7723 FOR AREA DUMPS, ONLY MIN OR OPT WITH WINDOW/PAGES IS ALLOWED
DMP7724
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7724 OPENING DUMP FILE (&00)
Meaning
Message issued for tracing the current state of list output.
DMP7725
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7725 SELECTED OPTIONS NOT SUPPORTED FOR CURRENT ADDRESS SPACE
Meaning
At least one of the maps, traces, tables, memory classes or a module
name was entered when changing the address space to data space, real
memory, processor saved status or HSA. In these address spaces the
given options have no meaning. The invalid options are removed.
DMP7726
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7726 'PAGE FROM' IS SMALLER THAN START OF HARDWARE SYSTEM AREA. INPUT CORRECTED
DMP7727
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7727 ONLY PAGE 0 OF PROCESSOR SAVED STATUS CAN BE LISTED
Meaning
Because the size of the processor saved status is smaller than
the size of a page, only page 0 can be listed.
DMP7728
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7728 NO CURRENT FT-DEFAULTS, ENTER OPTIONS FOR FILE TRANSFER
Meaning
The user requested remote output of a list, but there is no
DAMP-DAMP connection active. The list can only be transferred
via file transfer in this case.
Response
Fill in the necessary data for file transfer.
DMP7729
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7729 PAGE INTERVAL CONTAINS SYSTEM AND USER PAGES.
Meaning
You specified pages from a page interval containing both system and
user pages.
DMP7730
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7730 PAGE INTERVAL DOES NOT CONTAIN ANY SYSTEM PAGES.
Meaning
You specified a page interval containing only user pages, but did not
specify any task for it. Thus the output will be empty.
Response
Specify either a TID or a TSN.
DMP7731
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP7731 HSA UPPER SEARCH LIMIT CORRECTED TO MAXIMUM ADDRESS
Meaning
You specified an invalid upper search limit for the HSA.
If DAMP knows the HSA length, the correct upper search limit will be
calculated, else #7FFFFFFF will be inserted.
DMP8001
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8001 DMS ERROR (&01) WHILE OPENING '(&00)'
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP8002
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8002 DMS ERROR (&01) ON FILE MACRO FOR '(&00)'
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP8003
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8003 DMS ERROR (&01) WHILE CLOSING '(&00)'
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP8004
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8004 DMS ERROR (&01) WHILE READING '(&00)'
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP8005
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8005 DMS ERROR (&01) WHILE WRITING '(&00)'
Meaning
Enter HELP DMS(&01) to get more information about the DMS error.
DMP8006
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8006 INVALID INDEX1 BLOCK IN (&00) SECTION (LEVEL (&01))
Meaning
In the given section, an index block was found which does not
start with the string 'INDEX00n'. Processing continues.
DMP8007
Destination: USER-TASK Routing code: Weight: 04
Warranty : NO
DMP8007 (&00) SECTION HAS INVALID NUMBER OF INDEX LEVELS ((&01))
Meaning
The given section has an index1 structure and more than three levels.
The section is not copied, processing continues.
DMP8008
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8008 TOTAL NUMBER OF PAM PAGES WRITTEN : (&00)
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8009
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8009 SETTING BIT MAP FOR THE (&00) SECTION
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8010
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8010 BIT MAP IS SET. PROCESSING THE (&00) SECTION
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8011
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8011 PROCESSING PAGELOG SECTION
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8012
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8012 (&00) SECTION COMPLETED. (CONTAINS (&01) PAM PAGES)
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8013
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8013 DUMP FILE REDUCED BY (&00) PERCENT. SIZE OF NEW FILE : (&01) PAM PAGES
DMP8014
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8014 REDUCE FUNCTION TERMINATED
DMP8015
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8015 REDUCE FUNCTION TERMINATED ABNORMALLY
DMP8016
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8016 SHORTAGE OF MEMORY; REDUCE FUNCTION ABNORMALLY TERMINATED
DMP8017
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8017 ANITA LOAD ERROR; REDUCE FUNCTION ABNORMALLY TERMINATED
Meaning
An ANITA module cannot be loaded.
Response
Check ANITA load library.
DMP8018
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8018 ANITA DMS ERROR (&00); REDUCE FUNCTION ABNORMALLY TERMINATED
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP8019
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8019 ANITA ERROR (&00) WHILE SETTING BIT MAP
Meaning
The error displayed was reported by the dump access method ANITA.
Enter HELP DMP1600 to get more information about ANITA errors.
DMP8020
Destination: USER-TASK Routing code: Weight: 03
Warranty : NO
DMP8020 INCONSISTENT REMOVE ENTRY SKIPPED
DMP8021
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8021 ERROR (&01) ON DUMP-FILE '(&00)' RETURNED FROM FSTAT
DMP8022
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8022 SEARCHING FOR MAIN INDEX BLOCK. ACTUAL PAGE : (&00)
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8023
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8023 DUMP-FILE ''(&00)'' DOES NOT CONTAIN A VALID MAIN INDEX BLOCK
Meaning
Unexpectedly, DAMP does not find a valid main index block in the
dumpfile '(&00)'.
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP8024
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8024 PROCESSING PAGELOG2 SECTION
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8101 LOGGING_AND_REPLAY VERSION (&00) LOADED
DMP8102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8102 LOGGING FILE IN USE: (&00)
DMP8103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8103 LOGGING FILE NOT CREATED, DMS ERROR CODE: (&00)
Meaning
Logging switched off because of error.
Enter HELP DMS(&00) to get more information about the DMS error.
DMP8104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8104 LOGGING FILE NOT OPENED, DMS ERROR CODE: (&00)
Meaning
Logging switched off because of error.
Enter HELP DMS(&00) to get more information about the DMS error.
DMP8105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8105 LOGGING ALREADY SWITCHED ON, LOG FILE: (&00)
DMP8106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8106 INTERNAL ERROR WHILE HANDLING LOGGING FILE
Response
Contact your FUJITSU TECHNOLOGY SOLUTIONS service center.
DMP8107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8107 ERROR WHILE WRITING TO LOGGING FILE, DMS ERROR CODE: (&00)
Meaning
Logging switched off because of error.
Enter HELP DMS(&00) to get more information about the DMS error.
DMP8108
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8108 REQM ERROR WHILE CREATING INPUT AREA DURING REPLAY
Meaning
Replay canceled because of error.
DMP8109
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8109 ERROR WHILE READING FROM LOGGING FILE, DMS ERROR CODE: (&00)
Meaning
Replay canceled because of error.
Enter HELP DMS(&00) to get more information about the DMS error.
DMP8110
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8110 REPLAY NOT ALLOWED DURING LOGGING PROCESSING
DMP8111
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8111 REPLAY PROCESSING FINISHED
DMP8112
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8112 TIAM ERROR OCCURRED DURING REPLAY PROCESSING
DMP8113
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8113 LOGGING WAS NOT ACTIVATED
DMP8114
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8114 ERROR (&00) WHEN (&02) THE (&03)-FILE
DMP8115
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8115 CURRENT LOGGING-FILE CAN NOT BE PROCESSED
DMP8116
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8116 ERROR (&00) WHEN READING A RECORD
DMP8117
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8117 FORMAT-ERROR IN LOGGING-FILE
DMP8200
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8200 REDUCE VERSION (&00) LOADED
DMP8201
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8201 OPTION NO. (&00) OF (&01)
Meaning
The option currently displayed is number (&00) in a list of
(&01) options.
DMP8202
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8202 ACTION REMOVE OR PROTECT IS MISSING
Meaning
A new option was given without specifying if the given range
has to be removed or protected.
Response
Please mark the desired action (REMOVE/PROTECT).
DMP8203
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8203 (&00) IS NOT A VALID PAGE NUMBER
Meaning
The given page number is not a hexadecimal number.
DMP8204
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8204 SCROLLING IS NOT ALLOWED AS LONG AS CURRENT OPTION IS INVALID
Response
Please correct or delete the current option.
DMP8205
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8205 ALL OPTIONS REPLACED BY STANDARD OPTIONS
Meaning
The statement START-DUMP-REDUCTION was given. This initializes the
options with default values and deletes any existing options.
DMP8206
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8206 STATEMENT 'START-DUMP-REDUCTION' MUST BE GIVEN FIRST
Meaning
Before the statements PROTECT-DUMP-AREAS, REMOVE-DUMP-AREAS or
REDUCE-DUMPFILE can be given, the name of the new file has to
be specified with the statement START-DUMP-REDUCTION.
DMP8207
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8207 EDT CANNOT BE USED IF REMOTE DAMP PARTNER IS A BATCH TASK
DMP8208
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8208 CURRENT EDT WORK FILE NOT EMPTY
Meaning
The current EDT work file must be empty before the REDUCE option
is read in.
DMP8209
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8209 SECTION (&00) CANNOT BE REDUCED
Meaning
The sections MAINMEM and PAGEPHYS are not allowed in REDUCE options
because of their special meaning for the dump file.
DMP8210
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8210 NO VALID TASK FOR REDUCING USER MEMORY
Meaning
If user memory is specified (PAGE, CLASS 5/6), then a valid task must be
specified.
Response
Specify the task for which the user memory is to be reduced.
DMP8211
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8211 MODULE (&00) NOT FOUND. PROCESSING CONTINUES
DMP8212
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8212 TASK WITH TID (&00) NOT FOUND
Response
See task window (window 2) for available TIDs.
DMP8213
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8213 TASK WITH TSN (&00) NOT FOUND
Response
See task window (window 2) for available TSNs.
DMP8214
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8214 ADDRESS SPACE SELECTOR NOT SUPPORTED BY REDUCE FUNCTION
Meaning
The given address space selector is not supported by the REDUCE
Function. Supported values are : SYS, HSA, TID, TSN,
ALT and SPI.
DMP8215
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8215 'PAGE FROM' MUST NOT BE GREATER THAN 'PAGE TO'
DMP8216
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8216 ILLEGAL VALUE GIVEN FOR 'PAGE FROM'
Meaning
The value given for 'PAGE FROM' is not a hexadecimal number or is too
large.
DMP8217
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8217 ILLEGAL VALUE GIVEN FOR 'PAGE TO'
Meaning
The value given for 'PAGE TO' is not a hexadecimal number or is too
large.
DMP8218
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8218 RUNNING AUTOMATIC PREANALYSIS
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8219
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8219 CONVERTING OPTIONS TO PAGES
Meaning
Message issued for tracing the current state of the REDUCE function.
DMP8220
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8220 LINK ERROR WHILE LOADING PACKAGE (&00) FROM (&01)
Meaning
The LINK macro reported an error during loading of the code/data
module of the given package.
Response
Check library or use the LOAD-MODULE statement to load both
modules from another library.
DMP8221
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8221 NO VIRTUAL ADDRESSING POSSIBLE
DMP8301
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8301 AUDIT PROCESSING VERSION (&00) LOADED
DMP8302
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8302 NO APPROPRIATE DIAGNOSIS OBJECT OPENED FOR AUDIT PROCESSING
Meaning
AUDIT processing only works for BS2000 systems or BS2000 dumps.
DMP8303
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8303 AUDIT WAS NOT SWITCHED ON
Meaning
The selected AUDIT was not running at dump time.
DMP8304
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8304 INVALID INPUT OF AUDIT SCOPE OR AUDIT TYPE; INPUT IGNORED
Meaning
The following input is allowed:
KIND: HWA = Hardware AUDIT
LKA = Linkage AUDIT
PLA = Processor-local Linkage AUDIT
SCOPE: TU = Task Unprivileged (for HWA and LKA)
TPR = Task Privileged (for HWA and LKA)
SIH = System Interrupt Handler (for PLA).
DMP8306
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8306 INVALID LM NUMBER OR LM NOT AVAILABLE
DMP8307
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8307 REQUESTED AUDIT WAS NOT STARTED
DMP8308
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8308 AUDIT DATA NOT ACCESSIBLE
Meaning
Page not allocated or AUDIT table not in dump.
DMP8309
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8309 AUDIT PROCESSING CANNOT BE LOADED TWICE
DMP8501
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8501 TABLE PROCESSING VERSION (&00) LOADED
DMP8502
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8502 DISPLAY OF TABLES ONLY FOR OBJECTS WITH VIRTUAL ADDRESSING
Meaning
No or no suitable object has been opened for the display of
tables. Suitable objects are any BS2000 from a dumpfile which
can be addressed virtually by DAMP and the current BS2000.
The TABLE-window has been closed.
Response
Enter an OPEN-DIAGNOSIS-OBJECT statement for a suitable
object.
DMP8503
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8503 WRONG FIELD NAME OR FIELD NAME WITHIN AN INVALID DSECT
Meaning
Only the DSECTs ETCB, EJCB, EJTBP, EJTBX, EVUMT are allowed.
DMP8504
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8504 OUTPUT DATA TOO COMPREHENSIVE
Meaning
Output line too small to accommodate all information.
DMP8505
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8505 INPUT INCORRECT, ')' MISSING
DMP8506
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8506 INPUT INCORRECT, '->' ASSUMED
DMP8507
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8507 INPUT INCORRECT, PLEASE CORRECT AND REPEAT
DMP8601
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8601 TRACE PROCESSING VERSION (&00) LOADED
DMP8602
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8602 A DIAGNOSIS OBJECT MUST BE OPENED BEFORE TRACE CAN BE DISPLAYED
Response
Enter an OPEN-DIAGNOSIS-OBJECT statement.
DMP8603
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8603 TRACE TABLE DATA NOT ACCESSIBLE
Meaning
Page not allocated or trace table entry not in dump.
DMP8604
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8604 INVALID LM NUMBER
DMP8605
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8605 INVALID TID SPECIFIED
DMP8606
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8606 SPECIFIED TRACE ENTRIES NOT AVAILABLE - 'ALL' HAS BEEN ASSUMED
Meaning
With the operand LM or TID, specific trace entries were to be selected.
But no entries have been found for the input specification.
DMP8607
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8607 NO TASK WITH ITN '(&00)' ACTIVE; PLEASE ENTER COMPLETE TID
Meaning
The given ITN cannot be extended to a TID.
Response
Retry with a complete TID.
DMP8608
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8608 SIMULTANEOUS RESTRICTION OF LM AND TID IS INVALID
DMP8609
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8609 LM CURRENTLY NOT USED
Meaning
The field EXVTULM does not contain an indicator for that LM.
DMP8610
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8610 TRACE PROCCESSING CANNOT BE LOADED TWICE
DMP8611
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8611 TRACE TABLE OUTPUT RESTRICTED TO SLED AND SYSTEM DUMP
DMP8700
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8700 FIND VERSION (&00) LOADED
DMP8701
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8701 NO VALID DIAGNOSIS OBJECT AVAILABLE
Response
Give an OPEN-DIAGNOSIS-OBJECT statement.
DMP8705
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8705 OUTPUT FILE ALREADY EXISTING
Response
Please choose a different name for the output file.
DMP8710
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8710 THE GIVEN START ADDRESS IS NOT A HEXADECIMAL NUMBER
DMP8711
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8711 THE GIVEN END ADDRESS IS NOT A HEXADECIMAL NUMBER
DMP8712
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8712 INVALID SEGMENT NUMBER SPECIFIED
Meaning
The given segment number lies outside the range 0..7.
DMP8713
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8713 INVALID WILDCARD SYMBOL SPECIFIED
Meaning
The given wildcard symbol is not valid. Valid wildcards are all
characters except digits, letters and blanks.
DMP8714
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8714 INVALID ALIGNMENT SPECIFIED
Meaning
The given alignment is not valid. Valid alignments are B(yte),
H(alfword), W(ord), D(oubleword) and P(age : 2 Kbytes
for PAM files, 4 Kbytes otherwise).
DMP8715
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8715 INVALID STRING TYPE SPECIFIED
Meaning
The given string type is invalid. Valid string types are :
X,H : hexadecimal strings
C : character strings (converted to uppercase)
S : character strings (not converted to uppercase)
T : text (no difference between uppercase and lowercase).
DMP8716
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8716 SEARCH AREA NOT COMPLETELY IN USER ADDRESS SPACE
Meaning
The given search area is not completely in the user address space.
Response
Change address
DMP8717
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8717 TID/TSN = *ALL NOT ALLOWED IN SEARCH AREA LOAD UNIT
Meaning
Searching all TID/TSN not allowed in search area Load Unit.
DMP8718
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8718 TID/TSN = *ALL ALLOWED IN CLASS 5/6 ONLY
Meaning
Searching all TID/TSN allowed in the classes 5 and 6 only.
DMP8719
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8719 SPECIFIED INTERVAL EMPTY: START-ADDRESS ABOVE X'7FFFFFFF'
Meaning
There are no virtual addresses above X'7FFFFFFF' on a /390 server.
DMP8720
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8720 SPECIFIED SEGMENT EXCEEDS FILE SIZE. INPUT CORRECTED
DMP8721
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8721 END ADDRESS EXCEEDS FILE SIZE. INPUT CORRECTED
DMP8722
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8722 SIMULTANEOUS SPECIFICATION OF CLASS AND ADDRESS IS INVALID
Meaning
It is not allowed to specify address limits when searching in
classes.
Response
Please enter only address limits or only classes to specify
the search area.
DMP8723
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8723 START ADDRESS IS GREATER THAN END ADDRESS
DMP8724
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8724 SIMULTANEOUS SPECIFICATION OF CLASS AND MODULES IS INVALID
Meaning
It is not allowed to specify modules when searching in classes.
Response
Please enter only module names or only classes for searching.
DMP8725
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8725 INVALID PAGE NUMBER GIVEN
Meaning
The given page number is not valid. A valid page number starts with 'P-',
followed by a hexadecimal number larger than 0.
DMP8726
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8726 PAGE NUMBER LARGER THAN FILE SIZE. INPUT CORRECTED
Meaning
The given page number is larger than the last page of the file.
DMP8727
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8727 NO SUBSYSTEM INFORMATION AVAILABLE
Response
Please use other input fields to specify the search area.
DMP8728
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8728 CLASSES 1 TO 4 NOT VALID FOR USER DUMPS. INPUT CORRECTED
Meaning
In user dumps, no information is available about memory classes 1
to 4. The input is corrected.
Response
Please use other input fields to specify the search area if need be.
DMP8729
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8729 INVALID CHARACTER IN HEXADECIMAL SEARCH STRING
Meaning
The search string has the type "hexadecimal" and a non-hexadecimal
character was found in the input string.
DMP8730
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8730 SEARCH STRING TRUNCATED
Meaning
The string type has been changed to hexadecimal and the search string
was longer than 32 bytes. Only the first 32 bytes were kept.
DMP8731
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8731 NONPRINTABLE CHARACTERS IN SEARCH STRING
Meaning
The string type cannot be changed because the search string contains
nonprintable characters or some bytes are not masked by wildcards.
DMP8732
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8732 NO SEARCH AREA COMPLETELY SPECIFIED
Meaning
Before searching can start, exact one search area has to be specified
completely.
Response
Please specify exact one search area completely (see manual for
more details).
DMP8733
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8733 NO SEARCH STRING SPECIFIED
Meaning
Before searching can start, a search string has to be specified.
Response
Please enter search string (for more details see manual).
DMP8734
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8734 START ADDRESS NOT IN HARDWARE SYSTEM AREA. ADDRESS CORRECTED
Meaning
The selected start address is smaller than the start address of
the HSA. The address is set to the start address of the HSA.
DMP8735
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8735 START ADDRESS LARGER THAN SAVED STATUS LENGTH. ADDRESS CORRECTED
Meaning
The selected start address is larger than the length of a
Saved Status. The start address is set to 0.
DMP8736
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8736 END ADDRESS LARGER THAN SAVED STATUS LENGTH. ADDRESS CORRECTED
Meaning
The selected end address is larger than the length of a Saved Status.
The end address is set to the maximum value.
DMP8737
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8737 TID/TSN = *ALL ALLOWED FOR SLEDS ONLY
Meaning
Searching all TID/TSN allowed for SLEDs only.
DMP8740
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8740 SEARCHING SEGMENT (&00)
Meaning
This message informs the user about the segment that is currently
being searched. A segment comprises 1 Mbyte.
DMP8741
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8741 SEARCH PROCESSING OF PAGE (&00) INITIATED
Meaning
This message informs the user about which page is being searched. It is
issued each time a new Mbyte of the PAM file is searched (1 Mbyte =
512 PAM pages).
DMP8742
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8742 HITS SINCE LAST DISPLAY: (&00)
Meaning
This message informs the user about how many times the search string
has been found. It is issued after each hit.
DMP8743
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8743 PROCESSING CLASS (&00) MEMORY
Meaning
This message informs the user about which memory class is being
searched.
DMP8744
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8744 PROCESSING SUBSYSTEM (&00)
Meaning
This message informs the user about which subsystem is being
searched.
DMP8750
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8750 SOME PAGES NOT IN DUMP
Meaning
When several pages could not be read, then this message is issued
instead of single messages for each page.
DMP8751
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8751 CLASS (&00) SEARCH INTERRUPTED; <F3> CONTINUE, <F1> CANCEL
Meaning
The given memory class has not been searched completely, but
enough hits have been found to fill the screen.
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8752
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8752 CLASS (&00) COMPLETELY SEARCHED. PRESS <F3> FOR NEXT CLASS
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8753
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8753 CLASS (&00) COMPLETELY SEARCHED. SEARCH COMPLETED
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8754
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8754 SEARCH IN SUBSYSTEM (&00) INTERRUPTED; <F3> CONTINUE, <F1> CANCEL
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8755
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8755 (&00) COMPLETELY SEARCHED. PRESS <F3> FOR NEXT SUBSYSTEM
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8756
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8756 SUBSYSTEM (&00) COMPLETELY SEARCHED
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8757
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8757 SUBSYSTEM INFORMATION NOT AVAILABLE. PLEASE SPECIFY OTHER SEARCH AREA
Response
Please use other input fields to specify the search area.
DMP8758
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8758 SEARCHING INTERRUPTED. - PRESS <F3> TO CONTINUE, <F1> TO CANCEL
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8759
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8759 SEARCH COMPLETED
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8760
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8760 CLASS (&00) CANNOT BE SEARCHED. PRESS <F3> FOR NEXT CLASS
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8761
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8761 CLASS (&00) CANNOT BE SEARCHED. SEARCH COMPLETED
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8762
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8762 DMS ERROR (&01) ON OUTPUT-AREA-FILE '(&00)' RETURNED FROM FSTAT
DMP8770
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8770 FIND ABORTED. CANCEL PROCESSING COMPLETED
Meaning
Searching has been aborted by a /SEND-MSG TO=PROG,MES='CAN' command.
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8771
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8771 VIRTUAL MEMORY DATA NOT AVAILABLE FOR TID (&00)
DMP8772
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8772 VIRTUAL MEMORY DATA NOT COMPLETE FOR TID (&00)
DMP8773
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8773 VIRTUAL MEMORY DATA INCONSISTENT FOR TID (&00)
DMP8774
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8774 NO ACTIVE TASK FOUND
Meaning
The task list created by DAMP is empty.
Only real addressing is possible.
DMP8775
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8775 (&00) HAS NOT BEEN SPECIFIED
DMP8776
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8776 (&00) (&01) HAS NOT BEEN FOUND.
DMP8777
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8777 NO FIRST SEARCH STRING SPECIFIED
Meaning
Before searching can start, a search string has to be specified.
Response
Please enter search string (for more details see manual).
DMP8778
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8778 MODULE (&01) FROM SUBSYSTEM (&00) COMPLETELY SEARCHED
DMP8779
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8779 END ADDRESS LARGER THAN HSA LENGTH. ADDRESS CORRECTED
Meaning
The selected end address is larger than the length of a HSA.
The end address is set to the maximum value.
DMP8780
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8780 VERSION SPECIFICATION SENSELESS WITHOUT THE SUBSYSTEM SPECIFICATION
DMP8781
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8781 THE INPUT FOR 'OFFSET' IS NOT A HEXADECIMAL NUMBER OR INVALID
Meaning
The input for the offset-field was invalid,
therefore the offset has been set to "not specified".
To specify an offset you must use the hexadecimal notation with
1 to 8 hexdigits. Moreover, in case of a number with 8 places,
the leading digit must be less 8.
To set the offset to "not specified" the user has to overwrite the
inputfield with blanks.
DMP8782
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8782 THE INPUT FOR 'NUMBER OF HITS' IS NOT A DECIMAL NUMBER GREATER THAN 0.
DMP8783
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8783 MORE THAN ONE SEARCH AREA IS SPECIFIED
Meaning
Before searching can start, exact one search area has to be specified.
Response
Please specify exact one search area (see manual for more details).
DMP8784
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8784 NO MATCHING SUBSYSTEM FOUND
DMP8785
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8785 INVALID OUTPUT FORMAT IN MODUS FIELD SPECIFIED.
Meaning
The given output format is not valid.
Response
Please select one of the following values:
D(MP): normal dump modus
C(HR): character modus
H(EX): hexadecimal modus
DMP8786
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8786 THE INPUT FOR 'COUNT ONLY' MUST BE 'Y' OR 'N'.
Meaning
The input for the 'count only' field was invalid,
therefore it has been set to 'N'-
If only the sum of hits should be displayed
please repeat the input.
DMP8790
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8790 SEARCHING ALL TID/TSN COMPLETED
Response
Press <F3> or <F1> to return to initial FIND screen.
DMP8791
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8791 SEARCH PROCESSING OF PAGE (&00) / TID (&01) INITIATED
Meaning
This message informs the user about which page is being searched. It is
issued each time a new Mbyte of the PAM file is searched (1 Mbyte =
512 PAM pages).
DMP8792
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8792 CLASS (&00) COMPLETELY SEARCHED. PRESS <F3> FOR NEXT CLASS IN TID (&01)
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8794
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8794 CLASS (&00) SEARCH IN TID (&01) INTERRUPTED; <F3> CONTINUE, <F1> CANCEL
Meaning
The given memory class has not been searched completely in TID (&01), but
enough hits have been found to fill the screen.
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8798
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8798 SEARCHING TID (&00) INTERRUPTED. - PRESS <F3> TO CONTINUE, <F1> TO CANCEL
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8799
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8799 SEARCHING TID (&00) COMPLETED. NEXT TID <F3>, CANCEL <F1>
Response
Press <F3> to continue searching.
Press <F1> to abort searching.
DMP8801
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8801 SUBSYSTEM PROCESSING VERSION (&00) LOADED
DMP8802
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8802 SUBSYSTEM (&00) NOT ACCESSIBLE
DMP8803
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8803 SUBSYSTEM (&00) COULD NOT BE FOUND
DMP8804
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8804 NO USER PROGRAM FOUND
DMP8805
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8805 CSECT MAP FOR (&00) NOT AVAILABLE
DMP8806
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8806 CSECT TO ADDRESS (&00) NOT FOUND
DMP8807
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8807 CSECT (&00) NOT FOUND
DMP8808
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8808 (&00) IS NOT A VALID HEXADECIMAL NUMBER
DMP8809
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8809 (&00) IS TOO LARGE. OVERFLOW
Meaning
The value given for HOLDER-TASK or ADDRESS is too large.
DMP8810
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8810 (&00) FIELD : (&01) IS NOT A VALID HEXADECIMAL NUMBER
DMP8811
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8811 (&00) FIELD : (&01) IS TOO LARGE. OVERFLOW
Meaning
The value given for HOLDER-TASK or ADDRESS is too large.
DMP8812
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8812 TID (&00) : TASK DATA NOT AVAILABLE
DMP8813
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8813 NO SUBSYSTEM ACCESSIBLE
DMP8814
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8814 CURRENT EDT WORKFILE (&00) IS NOT EMPTY
Response
Delete or change the current EDT workfile
DMP8815
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8815 THERE ARE CSECTS WITH NAMES LONGER THAN 8 CHARACTERS
Response
Enter "EDT" into the MODE field to read the full names of the csects
DMP8816
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8816 WORKING ON (&00)
DMP8817
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8817 SUSY-WINDOW: EDT ACCESS ERROR ( EDT RC = (&00) )
Meaning
The input EDT in the mode field of the SUSY-Window could not be
processed without errors. The EDT access has been terminated with
the specified error code.
DMP8901
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8901 OPTIONS PROCESSING VERSION (&00) LOADED
DMP8902
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8902 OPTIONS UPDATE COMPLETED
DMP8903
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8903 ERROR DETECTED, NO OPTION UPDATE PERFORMED
Meaning
An error prevented the option update. All errors are marked with "?".
DMP8904
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8904 ENTER (&00) TO COMPLETE OPTION PROCESSING
Meaning
A procedure file has been created which can be used to update the
DAMP loader program.
Response
Terminate DAMP and call procedure.
DMP8905
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8905 ERROR (&00) WHILE CREATING FILE (&01)
Meaning
The specified error has occurred during creation of the file that is
to contain the procedure for option save processing.
Response
Check your system files.
DMP8906
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8906 ERROR (&00) WHEN OPENING FILE (&01)
Meaning
The specified error has occurred during opening of the file that is
to contain the procedure for option save processing.
Response
Check specified file.
DMP8907
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP8907 ERROR (&00) WHEN WRITING FILE (&01)
Meaning
The specified error has occurred while writing to the file that is
to contain the procedure for option save processing.
Response
Check specified file.
DMP9101
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9101 VIRTUAL MEMORY ATTRIBUTES MAP VERSION (&00) LOADED
DMP9102
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9102 VIRTUAL MEMORY DATA NOT AVAILABLE FOR ASN (&00)
Meaning
Access to either SVMT, UVMT or a basic PDR failed.
Response
Check if the dump file contains the necessary pages.
DMP9103
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9103 VIRTUAL MEMORY DATA NOT COMPLETE FOR ASN (&00)
DMP9104
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9104 INVALID VALUE "(&00)" FOR ASN
Meaning
ASN is either an active TID or the symbol SYSTEM.
DMP9105
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9105 NO DEFAULT ASN AVAILABLE
Response
If a dump file is open, try to enter the ASN in the header line.
DMP9106
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9106 VIRTUAL MEMORY DATA INCONSISTENT FOR ASN (&00)
DMP9107
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9107 NO BS2000 OPENED. NO OUTPUT OF ATTRIBUTES OF MEMORYPAGES.
Meaning
A BS2000 (dumpfile or current system) has to be opened in order
to display the attributes of virtual-memory-pages.
DMP9108
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9108 WRONG/SENSELESS VALUE FOR THE PAGE NUMBER SPECIFIED.
Meaning
There has been specified a wrong keyword, a to high page number
or a wrong hexadecimal value.
DMP9500
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9500 DUMPED SYSTEM FILE/SECTION PROCESSING VERSION (&00) LOADED
DMP9501
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9501 DMS ERROR (&00) WHILE OPENING DUMP FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP9502
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9502 DMS ERROR (&00) WHILE CLOSING DUMP FILE
Meaning
Enter HELP DMS(&00) to get more information about the DMS error.
DMP9503
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9503 SYMBOL (&00) NOT FOUND
Meaning
The requested symbol name has not been found. Default values
are taken for the structure of the CDLOG section.
DMP9504
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9504 EDT CANNOT BE USED IF REMOTE DAMP PARTNER IS A BATCH TASK
DMP9505
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9505 CURRENT EDT WORK FILE IS NOT EMPTY
Meaning
The current EDT work file must be empty before a system file
is read in.
DMP9506
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9506 CDLOG SECTION CONTAINS INVALID HEADER
Meaning
The first bytes of the CDLOG section must contain the string "CDLOG".
Response
Check dump file.
DMP9507
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9507 CURRENT NAME OF SECTION IS (&00)
Meaning
The dumpfile contains no section with the given name.
But there is a section '(&00)' having the same meaning.
Therefore DAMP has replaced the given name by '(&00)'.
Known names with same meaning are:
'SAVEREP' up to V10.0A of BS2000 has been replaced by 'REPLOG'.
'HERSFILE' up to V11.0A of BS2000 has been replaced by 'HELFILE'.
DMP9508
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9508 CURRENT DIAGNOSIS OBJECT HAS WRONG TYPE FOR OUTPUT OF SECTIONS OR FILES
Meaning
This special function can only be used for BS2000 dump files and
self-loading dumps.
DMP9509
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9509 UNEXPECTED EDT ERROR OCCURRED (EDT RC: (&00))
Meaning
Check the EDT manual for details.
DMP9510
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9510 INVALID SECTION NAME OR OUTPUT OF SECTION NOT YET SUPPORTED
Meaning
Up to now the following sections are supported: CONSLOG, REPLOG
(from BS2000 V10.0 on), SAVEREP (up to BS2000 V9.5), SLEDLOG, CDLOG.
DMP9511
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9511 LIST OUTPUT OF (&00) FILE/SECTION TERMINATED
DMP9512
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9512 DMS ERROR (&01) WHILE OPENING '(&00)'
Meaning
In case of the DMS error 0D80 the current disk does not support
the format of the saved systemfile. Note that, generally, DAMP
does not convert the format of the file, especially it does not
convert from KEY to NONKEY.
Response
In case of DMS error 0D80:
1. Check the format of the saved systemfile with help of the file-
screen, mode ALL.
2. A generation of this file with DAMP is possible only if there
is a disk available which supports that format:
Generate an empty file on that disk and an TFT-entry with the name
of the scetion as linkname for this empty file.
(Use the /CREATE-FILE and /ADD-FILE-LINK commands. )
Then mark "GEN" in the FILE-screen.
DMP9513
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9513 DMS ERROR (&01) WHILE CLOSING '(&00)'
DMP9514
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9514 GENERATION OF (&00) FILE TERMINATED
Meaning
The given file has been generated. The name of the generated file is
given in message DMP9515.
DMP9515
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9515 GENERATED FILE : (&00)
DMP9516
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9516 DMS ERROR (&01) WHILE WRITING '(&00)'
DMP9517
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9517 FOR SYSTEM FILES, A BS2000 OR SELF-LOADING DUMP MUST BE OPENED
DMP9518
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9518 DUMP STRUCTURE CORRUPTED; DUMPED-SYSTEM-FILE FUNCTION UNLOADED
DMP9519
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9519 DUMPED-SYSTEM-FILE FUNCTION UNLOADED BECAUSE OF UNRECOVERABLE ERRORS
DMP9520
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9520 SYMBOL '(&00)' NOT FOUND; DUMPED-SYSTEM-FILE FUNCTION UNLOADED
Response
Add symbol element 'BS2000(<vers>)' using the ADD-SYMBOLS statement
and/or check the symbol library.
DMP9521
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9521 SECTION '(&00)' NOT IN DUMPFILE
Meaning
The dumpfile does not contain a section with the name '(&00)'.
When running in dialog DAMP switches automatically to the INF-mode.
The INF-mode gives an overview of all sections which are contained in
the dumpfile and which are not empty.
DMP9522
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9522 SECTION '(&00)' IS EMPTY
Meaning
The dumpgenerator has not put information in the section '(&00)'.
When running in dialog DAMP switches automatically to the INF-mode.
The INF-mode gives an overview of all sections which are contained in
the dumpfile and which are not empty.
DMP9523
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9523 ILLEGAL MODE FOR THE SECTION
Meaning
An unknown or for the given section unallowed mode has been
requested.
When running in dialog DAMP switches to the overview screen where
all allowed modes are displayed and can be selected by marking.
DMP9524
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9524 FILE (&00) EXISTS ALREADY. (&01)-FILE NOT GENERATED
Meaning
The (&01)-file could not be generated from the dump-file as there
exists already a file with the requested name (&00).
Response
Either erase the file (&00) or declare a new filename for the
file to be generated with /ADD-FILE-LINK.
DMP9525
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9525 'SAM' ASSUMED AS FCBTYPE FOR THE (&00)-FILE
Meaning
DAMP assumes FCBTYPE=SAM for the systemfile which has been saved
in the (&00)-section of the dump-file.
This message will be given because the evaluation of the saved
catalog-entry does not show FCBTYPE=SAM. But this is not
necessarily an error.
Response
None. In the mode 'ALL' of the overview-screen the FCBTYPE of the
saved catalog-entry will be displayed.
DMP9526
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9526 'DATA' ASSUMED AS BLOCK-CONTROL FOR THE (&00)-FILE
Meaning
DAMP assumes BLK-CNTRL=SAM for the systemfile which has been saved
in the (&00)-section of the dump-file.
This message will be given because the evaluation of the saved
catalog-entry does not show BLK-CNTRL=DATA. But this is not
necessarily an error.
Response
None. In the mode 'ALL' of the overview-screen the BLK-CNTRL of the
saved catalog-entry will be displayed.
DMP9527
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9527 DUMPFILE INCOMPLETE. PAM-PAGE (&00) NOT IN THE FILE.
Meaning
The MAIN-INDEX-BLOCK contains a reference of a PAM-page which is
not contained in the dumpfile.
This PAM-pagenumber is given in the message as a decimal number.
A dump-analysis is not or only in a restricted way possible
with this file.
Frequently a cancelled filetransfer is the cause of an
incomplete dumpfile.
Response
If the dumpfile results from a filetransfer compare the LPP
of the original file with that of the received file. If there is a
difference then repeat the filetranfer.
DMP9528
Destination: USER-TASK Routing code: Weight: 01
Warranty : NO
DMP9528 SECTION (&00) CANNOT BE ACCESSED.
Meaning
The section (&00) is empty or not completely contained in the
dumpfile or erroneous.
Response
None.